i2c: Consistently reject unsupported transactions

Many PC SMBus host controller drivers don't properly handle the case
where they are requested to achieve a transaction they do not support.
Update them so that the consistently print a warning message and
return a single error value in this case.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

drivers/i2c/busses/i2c-ali1535.c

@@ -357,10 +357,6 @@ static s32 ali1535_access(struct i2c_adapter *adap, u16 addr,
 	outb_p(0xFF, SMBHSTSTS);
 
 	switch (size) {
-	case I2C_SMBUS_PROC_CALL:
-		dev_err(&adap->dev, "I2C_SMBUS_PROC_CALL not supported!\n");
-		result = -EOPNOTSUPP;
-		goto EXIT;
 	case I2C_SMBUS_QUICK:
 		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
 		       SMBHSTADD);
@@ -418,6 +414,10 @@ static s32 ali1535_access(struct i2c_adapter *adap, u16 addr,
 				outb_p(data->block[i], SMBBLKDAT);
 		}
 		break;
+	default:
+		dev_warn(&adap->dev, "Unsupported transaction %d\n", size);
+		result = -EOPNOTSUPP;
+		goto EXIT;
 	}
 
 	result = ali1535_transaction(adap);

drivers/i2c/busses/i2c-ali1563.c

@@ -246,10 +246,6 @@ static s32 ali1563_access(struct i2c_adapter * a, u16 addr,
 
 	/* Map the size to what the chip understands */
 	switch (size) {
-	case I2C_SMBUS_PROC_CALL:
-		dev_err(&a->dev, "I2C_SMBUS_PROC_CALL not supported!\n");
-		error = -EINVAL;
-		break;
 	case I2C_SMBUS_QUICK:
 		size = HST_CNTL2_QUICK;
 		break;
@@ -265,6 +261,10 @@ static s32 ali1563_access(struct i2c_adapter * a, u16 addr,
 	case I2C_SMBUS_BLOCK_DATA:
 		size = HST_CNTL2_BLOCK;
 		break;
+	default:
+		dev_warn(&a->dev, "Unsupported transaction %d\n", size);
+		error = -EOPNOTSUPP;
+		goto Done;
 	}
 
 	outb_p(((addr & 0x7f) << 1) | (rw & 0x01), SMB_HST_ADD);

drivers/i2c/busses/i2c-ali15x3.c

@@ -362,9 +362,6 @@ static s32 ali15x3_access(struct i2c_adapter * adap, u16 addr,
 	}
 
 	switch (size) {
-	case I2C_SMBUS_PROC_CALL:
-		dev_err(&adap->dev, "I2C_SMBUS_PROC_CALL not supported!\n");
-		return -EOPNOTSUPP;
 	case I2C_SMBUS_QUICK:
 		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
 		       SMBHSTADD);
@@ -417,6 +414,9 @@ static s32 ali15x3_access(struct i2c_adapter * adap, u16 addr,
 		}
 		size = ALI15X3_BLOCK_DATA;
 		break;
+	default:
+		dev_warn(&adap->dev, "Unsupported transaction %d\n", size);
+		return -EOPNOTSUPP;
 	}
 
 	outb_p(size, SMBHSTCNT);	/* output command */

drivers/i2c/busses/i2c-amd756.c

@@ -200,12 +200,7 @@ static s32 amd756_access(struct i2c_adapter * adap, u16 addr,
 	int i, len;
 	int status;
 
-	/** TODO: Should I supporte the 10-bit transfers? */
 	switch (size) {
-	case I2C_SMBUS_PROC_CALL:
-		dev_dbg(&adap->dev, "I2C_SMBUS_PROC_CALL not supported!\n");
-		/* TODO: Well... It is supported, I'm just not sure what to do here... */
-		return -EOPNOTSUPP;
 	case I2C_SMBUS_QUICK:
 		outw_p(((addr & 0x7f) << 1) | (read_write & 0x01),
 		       SMB_HOST_ADDRESS);
@@ -252,6 +247,9 @@ static s32 amd756_access(struct i2c_adapter * adap, u16 addr,
 		}
 		size = AMD756_BLOCK_DATA;
 		break;
+	default:
+		dev_warn(&adap->dev, "Unsupported transaction %d\n", size);
+		return -EOPNOTSUPP;
 	}
 
 	/* How about enabling interrupts... */

drivers/i2c/busses/i2c-i801.c

@@ -513,7 +513,6 @@ static s32 i801_access(struct i2c_adapter * adap, u16 addr,
 			outb_p(command, SMBHSTCMD);
 		block = 1;
 		break;
-	case I2C_SMBUS_PROC_CALL:
 	default:
 		dev_err(&I801_dev->dev, "Unsupported transaction %d\n", size);
 		return -EOPNOTSUPP;

drivers/i2c/busses/i2c-piix4.c

@@ -307,9 +307,6 @@ static s32 piix4_access(struct i2c_adapter * adap, u16 addr,
 	int status;
 
 	switch (size) {
-	case I2C_SMBUS_PROC_CALL:
-		dev_err(&adap->dev, "I2C_SMBUS_PROC_CALL not supported!\n");
-		return -EOPNOTSUPP;
 	case I2C_SMBUS_QUICK:
 		outb_p((addr << 1) | read_write,
 		       SMBHSTADD);
@@ -355,6 +352,9 @@ static s32 piix4_access(struct i2c_adapter * adap, u16 addr,
 		}
 		size = PIIX4_BLOCK_DATA;
 		break;
+	default:
+		dev_warn(&adap->dev, "Unsupported transaction %d\n", size);
+		return -EOPNOTSUPP;
 	}
 
 	outb_p((size & 0x1C) + (ENABLE_INT9 & 1), SMBHSTCNT);

drivers/i2c/busses/i2c-sis630.c

@@ -356,7 +356,8 @@ static s32 sis630_access(struct i2c_adapter *adap, u16 addr,
 			size = SIS630_BLOCK_DATA;
 			return sis630_block_data(adap, data, read_write);
 		default:
-			printk("Unsupported SMBus operation\n");
+			dev_warn(&adap->dev, "Unsupported transaction %d\n",
+				 size);
 			return -EOPNOTSUPP;
 	}
 
@@ -378,8 +379,6 @@ static s32 sis630_access(struct i2c_adapter *adap, u16 addr,
 		case SIS630_WORD_DATA:
 			data->word = sis630_read(SMB_BYTE) + (sis630_read(SMB_BYTE + 1) << 8);
 			break;
-		default:
-			return -EOPNOTSUPP;
 	}
 
 	return 0;

drivers/i2c/busses/i2c-sis96x.c

@@ -201,14 +201,8 @@ static s32 sis96x_access(struct i2c_adapter * adap, u16 addr,
 			SIS96x_PROC_CALL : SIS96x_WORD_DATA);
 		break;
 
-	case I2C_SMBUS_BLOCK_DATA:
-		/* TO DO: */
-		dev_info(&adap->dev, "SMBus block not implemented!\n");
-		return -EOPNOTSUPP;
-		break;
-
 	default:
-		dev_info(&adap->dev, "Unsupported SMBus operation\n");
+		dev_warn(&adap->dev, "Unsupported transaction %d\n", size);
 		return -EOPNOTSUPP;
 	}
 

drivers/i2c/busses/i2c-taos-evm.c

@@ -96,9 +96,8 @@ static int taos_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
 			sprintf(p, "$%02X", command);
 		break;
 	default:
-		dev_dbg(&adapter->dev, "Unsupported transaction size %d\n",
+		dev_warn(&adapter->dev, "Unsupported transaction %d\n", size);
-			size);
+		return -EOPNOTSUPP;
-		return -EINVAL;
 	}
 
 	/* Send the transaction to the TAOS EVM */

drivers/i2c/busses/i2c-viapro.c

@@ -287,7 +287,7 @@ static s32 vt596_access(struct i2c_adapter *adap, u16 addr,
 	return 0;
 
 exit_unsupported:
-	dev_warn(&vt596_adapter.dev, "Unsupported command invoked! (0x%02x)\n",
+	dev_warn(&vt596_adapter.dev, "Unsupported transaction %d\n",
 		 size);
 	return -EOPNOTSUPP;
 }