leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity

gxfb: create DC/VP/FP-specific handlers rather than using readl/writel

Browse Source 
This creates read_dc/write_dc, read_vp/write_vp, and read_fp/write_fp for
reading and updating those registers.  It creates gxfb.h to house these.

We also drop a no-op readl() from gx_set_mode.  Other than that, there should
be no functionality change.

Signed-off-by: Andres Salomon <dilinger@debian.org>
Cc: Jordan Crouse <jordan.crouse@amd.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit is contained in:
Andres Salomon 2008-04-28 02:14:58 -07:00 committed by Linus Torvalds
parent fa20c8a6e5
commit ab06aaf6a6
4 changed files with 97 additions and 43 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

48
drivers/video/geode/display_gx.c
View File

@ -20,6 +20,7 @@
#include "geodefb.h"
#include "display_gx.h"
#include "gxfb.h"
unsigned int gx_frame_buffer_size(void)
{
@ -50,22 +51,21 @@ static void gx_set_mode(struct fb_info *info)
int vactive, vblankstart, vsyncstart, vsyncend, vblankend, vtotal;
/* Unlock the display controller registers. */
readl(par->dc_regs + DC_UNLOCK);
writel(DC_UNLOCK_CODE, par->dc_regs + DC_UNLOCK);
write_dc(par, DC_UNLOCK, DC_UNLOCK_CODE);
gcfg = readl(par->dc_regs + DC_GENERAL_CFG);
dcfg = readl(par->dc_regs + DC_DISPLAY_CFG);
gcfg = read_dc(par, DC_GENERAL_CFG);
dcfg = read_dc(par, DC_DISPLAY_CFG);
/* Disable the timing generator. */
dcfg &= ~(DC_DCFG_TGEN);
writel(dcfg, par->dc_regs + DC_DISPLAY_CFG);
write_dc(par, DC_DISPLAY_CFG, dcfg);
/* Wait for pending memory requests before disabling the FIFO load. */
udelay(100);
/* Disable FIFO load and compression. */
gcfg &= ~(DC_GCFG_DFLE | DC_GCFG_CMPE | DC_GCFG_DECE);
writel(gcfg, par->dc_regs + DC_GENERAL_CFG);
write_dc(par, DC_GENERAL_CFG, gcfg);
/* Setup DCLK and its divisor. */
par->vid_ops->set_dclk(info);
@ -83,12 +83,12 @@ static void gx_set_mode(struct fb_info *info)
gcfg |= (6 << DC_GCFG_DFHPEL_POS) | (5 << DC_GCFG_DFHPSL_POS) | DC_GCFG_DFLE;
/* Framebuffer start offset. */
writel(0, par->dc_regs + DC_FB_ST_OFFSET);
write_dc(par, DC_FB_ST_OFFSET, 0);
/* Line delta and line buffer length. */
writel(info->fix.line_length >> 3, par->dc_regs + DC_GFX_PITCH);
writel(((info->var.xres * info->var.bits_per_pixel/8) >> 3) + 2,
par->dc_regs + DC_LINE_SIZE);
write_dc(par, DC_GFX_PITCH, info->fix.line_length >> 3);
write_dc(par, DC_LINE_SIZE,
((info->var.xres * info->var.bits_per_pixel/8) >> 3) + 2);
/* Enable graphics and video data and unmask address lines. */
@ -127,22 +127,28 @@ static void gx_set_mode(struct fb_info *info)
vblankend = vsyncend + info->var.upper_margin;
vtotal = vblankend;
writel((hactive - 1) | ((htotal - 1) << 16), par->dc_regs + DC_H_ACTIVE_TIMING);
writel((hblankstart - 1) | ((hblankend - 1) << 16), par->dc_regs + DC_H_BLANK_TIMING);
writel((hsyncstart - 1) | ((hsyncend - 1) << 16), par->dc_regs + DC_H_SYNC_TIMING);
write_dc(par, DC_H_ACTIVE_TIMING, (hactive - 1) |
((htotal - 1) << 16));
write_dc(par, DC_H_BLANK_TIMING, (hblankstart - 1) |
((hblankend - 1) << 16));
write_dc(par, DC_H_SYNC_TIMING, (hsyncstart - 1) |
((hsyncend - 1) << 16));
writel((vactive - 1) | ((vtotal - 1) << 16), par->dc_regs + DC_V_ACTIVE_TIMING);
writel((vblankstart - 1) | ((vblankend - 1) << 16), par->dc_regs + DC_V_BLANK_TIMING);
writel((vsyncstart - 1) | ((vsyncend - 1) << 16), par->dc_regs + DC_V_SYNC_TIMING);
write_dc(par, DC_V_ACTIVE_TIMING, (vactive - 1) |
((vtotal - 1) << 16));
write_dc(par, DC_V_BLANK_TIMING, (vblankstart - 1) |
((vblankend - 1) << 16));
write_dc(par, DC_V_SYNC_TIMING, (vsyncstart - 1) |
((vsyncend - 1) << 16));
/* Write final register values. */
writel(dcfg, par->dc_regs + DC_DISPLAY_CFG);
writel(gcfg, par->dc_regs + DC_GENERAL_CFG);
write_dc(par, DC_DISPLAY_CFG, dcfg);
write_dc(par, DC_GENERAL_CFG, gcfg);
par->vid_ops->configure_display(info);
/* Relock display controller registers */
writel(0, par->dc_regs + DC_UNLOCK);
write_dc(par, DC_UNLOCK, 0);
}
static void gx_set_hw_palette_reg(struct fb_info *info, unsigned regno,
@ -156,8 +162,8 @@ static void gx_set_hw_palette_reg(struct fb_info *info, unsigned regno,
val |= (green) & 0x00ff00;
val |= (blue >> 8) & 0x0000ff;
writel(regno, par->dc_regs + DC_PAL_ADDRESS);
writel(val, par->dc_regs + DC_PAL_DATA);
write_dc(par, DC_PAL_ADDRESS, regno);
write_dc(par, DC_PAL_DATA, val);
}
struct geode_dc_ops gx_dc_ops = {

47
drivers/video/geode/gxfb.h Normal file
View File

@ -0,0 +1,47 @@
/*
* Copyright (C) 2008 Andres Salomon <dilinger@debian.org>
*
* Geode GX2 register tables
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef _GXFB_H_
#define _GXFB_H_
#include <linux/io.h>
static inline uint32_t read_dc(struct geodefb_par *par, int reg)
{
return readl(par->dc_regs + reg);
}
static inline void write_dc(struct geodefb_par *par, int reg, uint32_t val)
{
writel(val, par->dc_regs + reg);
}
static inline uint32_t read_vp(struct geodefb_par *par, int reg)
{
return readl(par->vid_regs + reg);
}
static inline void write_vp(struct geodefb_par *par, int reg, uint32_t val)
{
writel(val, par->vid_regs + reg);
}
static inline uint32_t read_fp(struct geodefb_par *par, int reg)
{
return readl(par->vid_regs + reg);
}
static inline void write_fp(struct geodefb_par *par, int reg, uint32_t val)
{
writel(val, par->vid_regs + reg);
}
#endif

4
drivers/video/geode/gxfb_core.c
View File

@ -35,6 +35,7 @@
#include "geodefb.h"
#include "display_gx.h"
#include "video_gx.h"
#include "gxfb.h"
static char *mode_option;
static int vram;
@ -243,8 +244,7 @@ static int __init gxfb_map_video_memory(struct fb_info *info, struct pci_dev *de
/* Set the 16MiB aligned base address of the graphics memory region
* in the display controller */
writel(info->fix.smem_start & 0xFF000000,
par->dc_regs + DC_GLIU0_MEM_OFFSET);
write_dc(par, DC_GLIU0_MEM_OFFSET, info->fix.smem_start & 0xFF000000);
dev_info(&dev->dev, "%d KiB of video memory at 0x%lx\n",
info->fix.smem_len / 1024, info->fix.smem_start);

41
drivers/video/geode/video_gx.c
View File

@ -20,6 +20,7 @@
#include "geodefb.h"
#include "video_gx.h"
#include "gxfb.h"
/*
@ -192,16 +193,16 @@ gx_configure_tft(struct fb_info *info)
/* Turn off the panel */
fp = readl(par->vid_regs + GX_FP_PM);
fp = read_fp(par, GX_FP_PM);
fp &= ~GX_FP_PM_P;
writel(fp, par->vid_regs + GX_FP_PM);
write_fp(par, GX_FP_PM, fp);
/* Set timing 1 */
fp = readl(par->vid_regs + GX_FP_PT1);
fp = read_fp(par, GX_FP_PT1);
fp &= GX_FP_PT1_VSIZE_MASK;
fp |= info->var.yres << GX_FP_PT1_VSIZE_SHIFT;
writel(fp, par->vid_regs + GX_FP_PT1);
write_fp(par, GX_FP_PT1, fp);
/* Timing 2 */
/* Set bits that are always on for TFT */
@ -216,22 +217,22 @@ gx_configure_tft(struct fb_info *info)
if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT))
fp |= GX_FP_PT2_HSP;
writel(fp, par->vid_regs + GX_FP_PT2);
write_fp(par, GX_FP_PT2, fp);
/* Set the dither control */
writel(0x70, par->vid_regs + GX_FP_DFC);
write_fp(par, GX_FP_DFC, 0x70);
/* Enable the FP data and power (in case the BIOS didn't) */
fp = readl(par->vid_regs + GX_DCFG);
fp = read_vp(par, GX_DCFG);
fp |= GX_DCFG_FP_PWR_EN | GX_DCFG_FP_DATA_EN;
writel(fp, par->vid_regs + GX_DCFG);
write_vp(par, GX_DCFG, fp);
/* Unblank the panel */
fp = readl(par->vid_regs + GX_FP_PM);
fp = read_fp(par, GX_FP_PM);
fp |= GX_FP_PM_P;
writel(fp, par->vid_regs + GX_FP_PM);
write_fp(par, GX_FP_PM, fp);
}
static void gx_configure_display(struct fb_info *info)
@ -240,11 +241,11 @@ static void gx_configure_display(struct fb_info *info)
u32 dcfg, misc;
/* Write the display configuration */
dcfg = readl(par->vid_regs + GX_DCFG);
dcfg = read_vp(par, GX_DCFG);
/* Disable hsync and vsync */
dcfg &= ~(GX_DCFG_VSYNC_EN | GX_DCFG_HSYNC_EN);
writel(dcfg, par->vid_regs + GX_DCFG);
write_vp(par, GX_DCFG, dcfg);
/* Clear bits from existing mode. */
dcfg &= ~(GX_DCFG_CRT_SYNC_SKW_MASK
@ -257,7 +258,7 @@ static void gx_configure_display(struct fb_info *info)
/* Enable hsync and vsync. */
dcfg |= GX_DCFG_HSYNC_EN | GX_DCFG_VSYNC_EN;
misc = readl(par->vid_regs + GX_MISC);
misc = read_vp(par, GX_MISC);
/* Disable gamma correction */
misc |= GX_MISC_GAM_EN;
@ -266,7 +267,7 @@ static void gx_configure_display(struct fb_info *info)
/* Power up the CRT DACs */
misc &= ~(GX_MISC_A_PWRDN | GX_MISC_DAC_PWRDN);
writel(misc, par->vid_regs + GX_MISC);
write_vp(par, GX_MISC, misc);
/* Only change the sync polarities if we are running
* in CRT mode. The FP polarities will be handled in
@ -278,7 +279,7 @@ static void gx_configure_display(struct fb_info *info)
} else {
/* Power down the CRT DACs if in FP mode */
misc |= (GX_MISC_A_PWRDN | GX_MISC_DAC_PWRDN);
writel(misc, par->vid_regs + GX_MISC);
write_vp(par, GX_MISC, misc);
}
/* Enable the display logic */
@ -288,7 +289,7 @@ static void gx_configure_display(struct fb_info *info)
/* Enable the external DAC VREF? */
writel(dcfg, par->vid_regs + GX_DCFG);
write_vp(par, GX_DCFG, dcfg);
/* Set up the flat panel (if it is enabled) */
@ -322,7 +323,7 @@ static int gx_blank_display(struct fb_info *info, int blank_mode)
default:
return -EINVAL;
}
dcfg = readl(par->vid_regs + GX_DCFG);
dcfg = read_vp(par, GX_DCFG);
dcfg &= ~(GX_DCFG_DAC_BL_EN
| GX_DCFG_HSYNC_EN | GX_DCFG_VSYNC_EN);
if (!blank)
@ -331,17 +332,17 @@ static int gx_blank_display(struct fb_info *info, int blank_mode)
dcfg |= GX_DCFG_HSYNC_EN;
if (vsync)
dcfg |= GX_DCFG_VSYNC_EN;
writel(dcfg, par->vid_regs + GX_DCFG);
write_vp(par, GX_DCFG, dcfg);
/* Power on/off flat panel. */
if (par->enable_crt == 0) {
fp_pm = readl(par->vid_regs + GX_FP_PM);
fp_pm = read_fp(par, GX_FP_PM);
if (blank_mode == FB_BLANK_POWERDOWN)
fp_pm &= ~GX_FP_PM_P;
else
fp_pm |= GX_FP_PM_P;
writel(fp_pm, par->vid_regs + GX_FP_PM);
write_fp(par, GX_FP_PM, fp_pm);
}
return 0;