forked from Minki/linux
[SCSI] vmw_pvscsi: Try setting host->max_id as suggested by the device.
Fetch the config page from the device to learn max target id to set host->max_id. Also, fix some indentation issues and update the 'Maintained by' field. Signed-off-by: Arvind Kumar <arvindkumar@vmware.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
This commit is contained in:
Arvind Kumar
James Bottomley
parent
3f0bc3b331
commit
a93107355d
@ -17,7 +17,7 @@
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
|
||||
*
|
||||
* Maintained by: Alok N Kataria <akataria@vmware.com>
|
||||
* Maintained by: Arvind Kumar <arvindkumar@vmware.com>
|
||||
*
|
||||
*/
|
||||
|
||||
@ -1178,11 +1178,67 @@ static int __devinit pvscsi_allocate_sg(struct pvscsi_adapter *adapter)
|
||||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
* Query the device, fetch the config info and return the
|
||||
* maximum number of targets on the adapter. In case of
|
||||
* failure due to any reason return default i.e. 16.
|
||||
*/
|
||||
static u32 pvscsi_get_max_targets(struct pvscsi_adapter *adapter)
|
||||
{
|
||||
struct PVSCSICmdDescConfigCmd cmd;
|
||||
struct PVSCSIConfigPageHeader *header;
|
||||
struct device *dev;
|
||||
dma_addr_t configPagePA;
|
||||
void *config_page;
|
||||
u32 numPhys = 16;
|
||||
|
||||
dev = pvscsi_dev(adapter);
|
||||
config_page = pci_alloc_consistent(adapter->dev, PAGE_SIZE,
|
||||
&configPagePA);
|
||||
if (!config_page) {
|
||||
dev_warn(dev, "vmw_pvscsi: failed to allocate memory for config page\n");
|
||||
goto exit;
|
||||
}
|
||||
BUG_ON(configPagePA & ~PAGE_MASK);
|
||||
|
||||
/* Fetch config info from the device. */
|
||||
cmd.configPageAddress = ((u64)PVSCSI_CONFIG_CONTROLLER_ADDRESS) << 32;
|
||||
cmd.configPageNum = PVSCSI_CONFIG_PAGE_CONTROLLER;
|
||||
cmd.cmpAddr = configPagePA;
|
||||
cmd._pad = 0;
|
||||
|
||||
/*
|
||||
* Mark the completion page header with error values. If the device
|
||||
* completes the command successfully, it sets the status values to
|
||||
* indicate success.
|
||||
*/
|
||||
header = config_page;
|
||||
memset(header, 0, sizeof *header);
|
||||
header->hostStatus = BTSTAT_INVPARAM;
|
||||
header->scsiStatus = SDSTAT_CHECK;
|
||||
|
||||
pvscsi_write_cmd_desc(adapter, PVSCSI_CMD_CONFIG, &cmd, sizeof cmd);
|
||||
|
||||
if (header->hostStatus == BTSTAT_SUCCESS &&
|
||||
header->scsiStatus == SDSTAT_GOOD) {
|
||||
struct PVSCSIConfigPageController *config;
|
||||
|
||||
config = config_page;
|
||||
numPhys = config->numPhys;
|
||||
} else
|
||||
dev_warn(dev, "vmw_pvscsi: PVSCSI_CMD_CONFIG failed. hostStatus = 0x%x, scsiStatus = 0x%x\n",
|
||||
header->hostStatus, header->scsiStatus);
|
||||
pci_free_consistent(adapter->dev, PAGE_SIZE, config_page, configPagePA);
|
||||
exit:
|
||||
return numPhys;
|
||||
}
|
||||
|
||||
static int __devinit pvscsi_probe(struct pci_dev *pdev,
|
||||
const struct pci_device_id *id)
|
||||
{
|
||||
struct pvscsi_adapter *adapter;
|
||||
struct Scsi_Host *host;
|
||||
struct device *dev;
|
||||
unsigned int i;
|
||||
unsigned long flags = 0;
|
||||
int error;
|
||||
@ -1271,6 +1327,13 @@ static int __devinit pvscsi_probe(struct pci_dev *pdev,
|
||||
goto out_release_resources;
|
||||
}
|
||||
|
||||
/*
|
||||
* Ask the device for max number of targets.
|
||||
*/
|
||||
host->max_id = pvscsi_get_max_targets(adapter);
|
||||
dev = pvscsi_dev(adapter);
|
||||
dev_info(dev, "vmw_pvscsi: host->max_id: %u\n", host->max_id);
|
||||
|
||||
/*
|
||||
* From this point on we should reset the adapter if anything goes
|
||||
* wrong.
|
||||
|
||||
@ -17,7 +17,7 @@
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
|
||||
*
|
||||
* Maintained by: Alok N Kataria <akataria@vmware.com>
|
||||
* Maintained by: Arvind Kumar <arvindkumar@vmware.com>
|
||||
*
|
||||
*/
|
||||
|
||||
@ -26,7 +26,7 @@
|
||||
|
||||
#include <linux/types.h>
|
||||
|
||||
#define PVSCSI_DRIVER_VERSION_STRING "1.0.1.0-k"
|
||||
#define PVSCSI_DRIVER_VERSION_STRING "1.0.2.0-k"
|
||||
|
||||
#define PVSCSI_MAX_NUM_SG_ENTRIES_PER_SEGMENT 128
|
||||
|
||||
@ -39,28 +39,45 @@
|
||||
* host adapter status/error codes
|
||||
*/
|
||||
enum HostBusAdapterStatus {
|
||||
BTSTAT_SUCCESS = 0x00, /* CCB complete normally with no errors */
|
||||
BTSTAT_LINKED_COMMAND_COMPLETED = 0x0a,
|
||||
BTSTAT_LINKED_COMMAND_COMPLETED_WITH_FLAG = 0x0b,
|
||||
BTSTAT_DATA_UNDERRUN = 0x0c,
|
||||
BTSTAT_SELTIMEO = 0x11, /* SCSI selection timeout */
|
||||
BTSTAT_DATARUN = 0x12, /* data overrun/underrun */
|
||||
BTSTAT_BUSFREE = 0x13, /* unexpected bus free */
|
||||
BTSTAT_INVPHASE = 0x14, /* invalid bus phase or sequence requested by target */
|
||||
BTSTAT_LUNMISMATCH = 0x17, /* linked CCB has different LUN from first CCB */
|
||||
BTSTAT_SENSFAILED = 0x1b, /* auto request sense failed */
|
||||
BTSTAT_TAGREJECT = 0x1c, /* SCSI II tagged queueing message rejected by target */
|
||||
BTSTAT_BADMSG = 0x1d, /* unsupported message received by the host adapter */
|
||||
BTSTAT_HAHARDWARE = 0x20, /* host adapter hardware failed */
|
||||
BTSTAT_NORESPONSE = 0x21, /* target did not respond to SCSI ATN, sent a SCSI RST */
|
||||
BTSTAT_SENTRST = 0x22, /* host adapter asserted a SCSI RST */
|
||||
BTSTAT_RECVRST = 0x23, /* other SCSI devices asserted a SCSI RST */
|
||||
BTSTAT_DISCONNECT = 0x24, /* target device reconnected improperly (w/o tag) */
|
||||
BTSTAT_BUSRESET = 0x25, /* host adapter issued BUS device reset */
|
||||
BTSTAT_ABORTQUEUE = 0x26, /* abort queue generated */
|
||||
BTSTAT_HASOFTWARE = 0x27, /* host adapter software error */
|
||||
BTSTAT_HATIMEOUT = 0x30, /* host adapter hardware timeout error */
|
||||
BTSTAT_SCSIPARITY = 0x34, /* SCSI parity error detected */
|
||||
BTSTAT_SUCCESS = 0x00, /* CCB complete normally with no errors */
|
||||
BTSTAT_LINKED_COMMAND_COMPLETED = 0x0a,
|
||||
BTSTAT_LINKED_COMMAND_COMPLETED_WITH_FLAG = 0x0b,
|
||||
BTSTAT_DATA_UNDERRUN = 0x0c,
|
||||
BTSTAT_SELTIMEO = 0x11, /* SCSI selection timeout */
|
||||
BTSTAT_DATARUN = 0x12, /* data overrun/underrun */
|
||||
BTSTAT_BUSFREE = 0x13, /* unexpected bus free */
|
||||
BTSTAT_INVPHASE = 0x14, /* invalid bus phase or sequence
|
||||
* requested by target */
|
||||
BTSTAT_LUNMISMATCH = 0x17, /* linked CCB has different LUN from
|
||||
* first CCB */
|
||||
BTSTAT_INVPARAM = 0x1a, /* invalid parameter in CCB or segment
|
||||
* list */
|
||||
BTSTAT_SENSFAILED = 0x1b, /* auto request sense failed */
|
||||
BTSTAT_TAGREJECT = 0x1c, /* SCSI II tagged queueing message
|
||||
* rejected by target */
|
||||
BTSTAT_BADMSG = 0x1d, /* unsupported message received by the
|
||||
* host adapter */
|
||||
BTSTAT_HAHARDWARE = 0x20, /* host adapter hardware failed */
|
||||
BTSTAT_NORESPONSE = 0x21, /* target did not respond to SCSI ATN,
|
||||
* sent a SCSI RST */
|
||||
BTSTAT_SENTRST = 0x22, /* host adapter asserted a SCSI RST */
|
||||
BTSTAT_RECVRST = 0x23, /* other SCSI devices asserted a SCSI
|
||||
* RST */
|
||||
BTSTAT_DISCONNECT = 0x24, /* target device reconnected improperly
|
||||
* (w/o tag) */
|
||||
BTSTAT_BUSRESET = 0x25, /* host adapter issued BUS device reset */
|
||||
BTSTAT_ABORTQUEUE = 0x26, /* abort queue generated */
|
||||
BTSTAT_HASOFTWARE = 0x27, /* host adapter software error */
|
||||
BTSTAT_HATIMEOUT = 0x30, /* host adapter hardware timeout error */
|
||||
BTSTAT_SCSIPARITY = 0x34, /* SCSI parity error detected */
|
||||
};
|
||||
|
||||
/*
|
||||
* SCSI device status values.
|
||||
*/
|
||||
enum ScsiDeviceStatus {
|
||||
SDSTAT_GOOD = 0x00, /* No errors. */
|
||||
SDSTAT_CHECK = 0x02, /* Check condition. */
|
||||
};
|
||||
|
||||
/*
|
||||
@ -113,6 +130,29 @@ struct PVSCSICmdDescResetDevice {
|
||||
u8 lun[8];
|
||||
} __packed;
|
||||
|
||||
/*
|
||||
* Command descriptor for PVSCSI_CMD_CONFIG --
|
||||
*/
|
||||
|
||||
struct PVSCSICmdDescConfigCmd {
|
||||
u64 cmpAddr;
|
||||
u64 configPageAddress;
|
||||
u32 configPageNum;
|
||||
u32 _pad;
|
||||
} __packed;
|
||||
|
||||
enum PVSCSIConfigPageType {
|
||||
PVSCSI_CONFIG_PAGE_CONTROLLER = 0x1958,
|
||||
PVSCSI_CONFIG_PAGE_PHY = 0x1959,
|
||||
PVSCSI_CONFIG_PAGE_DEVICE = 0x195a,
|
||||
};
|
||||
|
||||
enum PVSCSIConfigPageAddressType {
|
||||
PVSCSI_CONFIG_CONTROLLER_ADDRESS = 0x2120,
|
||||
PVSCSI_CONFIG_BUSTARGET_ADDRESS = 0x2121,
|
||||
PVSCSI_CONFIG_PHY_ADDRESS = 0x2122,
|
||||
};
|
||||
|
||||
/*
|
||||
* Command descriptor for PVSCSI_CMD_ABORT_CMD --
|
||||
*
|
||||
@ -332,6 +372,27 @@ struct PVSCSIRingCmpDesc {
|
||||
u32 _pad[2];
|
||||
} __packed;
|
||||
|
||||
struct PVSCSIConfigPageHeader {
|
||||
u32 pageNum;
|
||||
u16 numDwords;
|
||||
u16 hostStatus;
|
||||
u16 scsiStatus;
|
||||
u16 reserved[3];
|
||||
} __packed;
|
||||
|
||||
struct PVSCSIConfigPageController {
|
||||
struct PVSCSIConfigPageHeader header;
|
||||
u64 nodeWWN; /* Device name as defined in the SAS spec. */
|
||||
u16 manufacturer[64];
|
||||
u16 serialNumber[64];
|
||||
u16 opromVersion[32];
|
||||
u16 hwVersion[32];
|
||||
u16 firmwareVersion[32];
|
||||
u32 numPhys;
|
||||
u8 useConsecutivePhyWWNs;
|
||||
u8 reserved[3];
|
||||
} __packed;
|
||||
|
||||
/*
|
||||
* Interrupt status / IRQ bits.
|
||||
*/
|
||||
|
||||
Loading…
Reference in New Issue
Block a user