IXP4xx: move Gemtek GTWX5715 platform macros to the platform code.

Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
This commit is contained in:
Krzysztof Hałasa 2009-11-16 23:24:57 +01:00
parent 31bcde3785
commit a8b7b34075
3 changed files with 43 additions and 121 deletions

View File

@ -26,14 +26,26 @@
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/irq.h>
#include <asm/mach-types.h>
#include <mach/hardware.h>
#include <mach/gtwx5715.h>
#include <asm/mach/pci.h>
#define GTWX5715_PCI_SLOT0_DEVID 0
#define GTWX5715_PCI_SLOT0_INTA_GPIO 10
#define GTWX5715_PCI_SLOT0_INTB_GPIO 11
#define GTWX5715_PCI_SLOT0_INTA_IRQ IRQ_IXP4XX_GPIO10
#define GTWX5715_PCI_SLOT0_INTB_IRQ IRQ_IXP4XX_GPIO11
#define GTWX5715_PCI_SLOT1_DEVID 1
#define GTWX5715_PCI_SLOT1_INTA_GPIO 11
#define GTWX5715_PCI_SLOT1_INTB_GPIO 10
#define GTWX5715_PCI_SLOT1_INTA_IRQ IRQ_IXP4XX_GPIO11
#define GTWX5715_PCI_SLOT1_INTB_IRQ IRQ_IXP4XX_GPIO10
#define GTWX5715_PCI_SLOT_COUNT 2
#define GTWX5715_PCI_INT_PIN_COUNT 2
/*
* The exact GPIO pins and IRQs are defined in arch-ixp4xx/gtwx5715.h
* Slot 0 isn't actually populated with a card connector but
* we initialize it anyway in case a future version has the
* slot populated or someone with good soldering skills has

View File

@ -28,7 +28,6 @@
#include <linux/tty.h>
#include <linux/serial_8250.h>
#include <linux/slab.h>
#include <asm/types.h>
#include <asm/setup.h>
#include <asm/memory.h>
@ -37,7 +36,34 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include <mach/gtwx5715.h>
/* GPIO 5,6,7 and 12 are hard wired to the Kendin KS8995M Switch
and operate as an SPI type interface. The details of the interface
are available on Kendin/Micrel's web site. */
#define GTWX5715_KSSPI_SELECT 5
#define GTWX5715_KSSPI_TXD 6
#define GTWX5715_KSSPI_CLOCK 7
#define GTWX5715_KSSPI_RXD 12
/* The "reset" button is wired to GPIO 3.
The GPIO is brought "low" when the button is pushed. */
#define GTWX5715_BUTTON_GPIO 3
/* Board Label Front Label
LED1 Power
LED2 Wireless-G
LED3 not populated but could be
LED4 Internet
LED5 - LED8 Controlled by KS8995M Switch
LED9 DMZ */
#define GTWX5715_LED1_GPIO 2
#define GTWX5715_LED2_GPIO 9
#define GTWX5715_LED3_GPIO 8
#define GTWX5715_LED4_GPIO 1
#define GTWX5715_LED9_GPIO 4
/*
* Xscale UART registers are 32 bits wide with only the least

View File

@ -1,116 +0,0 @@
/*
* arch/arm/mach-ixp4xx/include/mach/gtwx5715.h
*
* Gemtek GTWX5715 Gateway (Linksys WRV54G)
*
* Copyright 2004 (c) George T. Joseph
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#ifndef __ASM_ARCH_HARDWARE_H__
#error "Do not include this directly, instead #include <mach/hardware.h>"
#endif
#include "irqs.h"
#define GTWX5715_GPIO0 0
#define GTWX5715_GPIO1 1
#define GTWX5715_GPIO2 2
#define GTWX5715_GPIO3 3
#define GTWX5715_GPIO4 4
#define GTWX5715_GPIO5 5
#define GTWX5715_GPIO6 6
#define GTWX5715_GPIO7 7
#define GTWX5715_GPIO8 8
#define GTWX5715_GPIO9 9
#define GTWX5715_GPIO10 10
#define GTWX5715_GPIO11 11
#define GTWX5715_GPIO12 12
#define GTWX5715_GPIO13 13
#define GTWX5715_GPIO14 14
#define GTWX5715_GPIO0_IRQ IRQ_IXP4XX_GPIO0
#define GTWX5715_GPIO1_IRQ IRQ_IXP4XX_GPIO1
#define GTWX5715_GPIO2_IRQ IRQ_IXP4XX_GPIO2
#define GTWX5715_GPIO3_IRQ IRQ_IXP4XX_GPIO3
#define GTWX5715_GPIO4_IRQ IRQ_IXP4XX_GPIO4
#define GTWX5715_GPIO5_IRQ IRQ_IXP4XX_GPIO5
#define GTWX5715_GPIO6_IRQ IRQ_IXP4XX_GPIO6
#define GTWX5715_GPIO7_IRQ IRQ_IXP4XX_GPIO7
#define GTWX5715_GPIO8_IRQ IRQ_IXP4XX_GPIO8
#define GTWX5715_GPIO9_IRQ IRQ_IXP4XX_GPIO9
#define GTWX5715_GPIO10_IRQ IRQ_IXP4XX_GPIO10
#define GTWX5715_GPIO11_IRQ IRQ_IXP4XX_GPIO11
#define GTWX5715_GPIO12_IRQ IRQ_IXP4XX_GPIO12
#define GTWX5715_GPIO13_IRQ IRQ_IXP4XX_SW_INT1
#define GTWX5715_GPIO14_IRQ IRQ_IXP4XX_SW_INT2
/* PCI controller GPIO to IRQ pin mappings
INTA INTB
SLOT 0 10 11
SLOT 1 11 10
*/
#define GTWX5715_PCI_SLOT0_DEVID 0
#define GTWX5715_PCI_SLOT0_INTA_GPIO GTWX5715_GPIO10
#define GTWX5715_PCI_SLOT0_INTB_GPIO GTWX5715_GPIO11
#define GTWX5715_PCI_SLOT0_INTA_IRQ GTWX5715_GPIO10_IRQ
#define GTWX5715_PCI_SLOT0_INTB_IRQ GTWX5715_GPIO11_IRQ
#define GTWX5715_PCI_SLOT1_DEVID 1
#define GTWX5715_PCI_SLOT1_INTA_GPIO GTWX5715_GPIO11
#define GTWX5715_PCI_SLOT1_INTB_GPIO GTWX5715_GPIO10
#define GTWX5715_PCI_SLOT1_INTA_IRQ GTWX5715_GPIO11_IRQ
#define GTWX5715_PCI_SLOT1_INTB_IRQ GTWX5715_GPIO10_IRQ
#define GTWX5715_PCI_SLOT_COUNT 2
#define GTWX5715_PCI_INT_PIN_COUNT 2
/*
* GPIO 5,6,7 and12 are hard wired to the Kendin KS8995M Switch
* and operate as an SPI type interface. The details of the interface
* are available on Kendin/Micrel's web site.
*/
#define GTWX5715_KSSPI_SELECT GTWX5715_GPIO5
#define GTWX5715_KSSPI_TXD GTWX5715_GPIO6
#define GTWX5715_KSSPI_CLOCK GTWX5715_GPIO7
#define GTWX5715_KSSPI_RXD GTWX5715_GPIO12
/*
* The "reset" button is wired to GPIO 3.
* The GPIO is brought "low" when the button is pushed.
*/
#define GTWX5715_BUTTON_GPIO GTWX5715_GPIO3
#define GTWX5715_BUTTON_IRQ GTWX5715_GPIO3_IRQ
/*
* Board Label Front Label
* LED1 Power
* LED2 Wireless-G
* LED3 not populated but could be
* LED4 Internet
* LED5 - LED8 Controlled by KS8995M Switch
* LED9 DMZ
*/
#define GTWX5715_LED1_GPIO GTWX5715_GPIO2
#define GTWX5715_LED2_GPIO GTWX5715_GPIO9
#define GTWX5715_LED3_GPIO GTWX5715_GPIO8
#define GTWX5715_LED4_GPIO GTWX5715_GPIO1
#define GTWX5715_LED9_GPIO GTWX5715_GPIO4