[ARM] pxa: remove periodic mode emulation support

Apparantly, the generic time subsystem can accurately emulate periodic
mode via the one-shot support code, so we don't need our own periodic
emulation code anymore.  Just ensure that we build support for one shot
into the generic time subsystem.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This commit is contained in:
Russell King 2007-11-12 22:45:16 +00:00 committed by Russell King
parent 3777f7748a
commit a88264c24c
2 changed files with 9 additions and 53 deletions

View File

@ -345,6 +345,7 @@ config ARCH_PXA
select GENERIC_GPIO
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select TICK_ONESHOT
help
Support for Intel/Marvell's PXA2xx/PXA3xx processor line.

View File

@ -59,55 +59,17 @@ unsigned long long sched_clock(void)
}
#define MIN_OSCR_DELTA 16
static irqreturn_t
pxa_ost0_interrupt(int irq, void *dev_id)
{
int next_match;
struct clock_event_device *c = dev_id;
if (c->mode == CLOCK_EVT_MODE_ONESHOT) {
/* Disarm the compare/match, signal the event. */
OIER &= ~OIER_E0;
OSSR = OSSR_M0;
c->event_handler(c);
} else if (c->mode == CLOCK_EVT_MODE_PERIODIC) {
/* Call the event handler as many times as necessary
* to recover missed events, if any (if we update
* OSMR0 and OSCR0 is still ahead of us, we've missed
* the event). As we're dealing with that, re-arm the
* compare/match for the next event.
*
* HACK ALERT:
*
* There's a latency between the instruction that
* writes to OSMR0 and the actual commit to the
* physical hardware, because the CPU doesn't (have
* to) run at bus speed, there's a write buffer
* between the CPU and the bus, etc. etc. So if the
* target OSCR0 is "very close", to the OSMR0 load
* value, the update to OSMR0 might not get to the
* hardware in time and we'll miss that interrupt.
*
* To be safe, if the new OSMR0 is "very close" to the
* target OSCR0 value, we call the event_handler as
* though the event actually happened. According to
* Nico's comment in the previous version of this
* code, experience has shown that 6 OSCR ticks is
* "very close" but he went with 8. We will use 16,
* based on the results of testing on PXA270.
*
* To be doubly sure, we also tell clkevt via
* clockevents_register_device() not to ask for
* anything that might put us "very close".
*/
#define MIN_OSCR_DELTA 16
do {
OSSR = OSSR_M0;
next_match = (OSMR0 += LATCH);
c->event_handler(c);
} while (((signed long)(next_match - OSCR) <= MIN_OSCR_DELTA)
&& (c->mode == CLOCK_EVT_MODE_PERIODIC));
}
/* Disarm the compare/match, signal the event. */
OIER &= ~OIER_E0;
OSSR = OSSR_M0;
c->event_handler(c);
return IRQ_HANDLED;
}
@ -133,14 +95,6 @@ pxa_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *dev)
unsigned long irqflags;
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
raw_local_irq_save(irqflags);
OSSR = OSSR_M0;
OIER |= OIER_E0;
OSMR0 = OSCR + LATCH;
raw_local_irq_restore(irqflags);
break;
case CLOCK_EVT_MODE_ONESHOT:
raw_local_irq_save(irqflags);
OIER &= ~OIER_E0;
@ -158,13 +112,14 @@ pxa_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *dev)
break;
case CLOCK_EVT_MODE_RESUME:
case CLOCK_EVT_MODE_PERIODIC:
break;
}
}
static struct clock_event_device ckevt_pxa_osmr0 = {
.name = "osmr0",
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
.features = CLOCK_EVT_FEAT_ONESHOT,
.shift = 32,
.rating = 200,
.cpumask = CPU_MASK_CPU0,