MIPS: BPF: Fix multiple problems in JIT skb access helpers.

o Socket data is unsigned, so use unsigned accessors instructions.

 o Fix path result pointer generation arithmetic.

 o Fix half-word byte swapping code for unsigned semantics.

Signed-off-by: David Daney <david.daney@cavium.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Steven J. Hill <steven.hill@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15747/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This commit is contained in:
David Daney 2017-03-14 14:21:44 -07:00 committed by Ralf Baechle
parent 1ef0910cfd
commit a81507c79f

View File

@ -90,18 +90,14 @@ FEXPORT(sk_load_half_positive)
is_offset_in_header(2, half)
/* Offset within header boundaries */
PTR_ADDU t1, $r_skb_data, offset
.set reorder
lh $r_A, 0(t1)
.set noreorder
lhu $r_A, 0(t1)
#ifdef CONFIG_CPU_LITTLE_ENDIAN
# if defined(__mips_isa_rev) && (__mips_isa_rev >= 2)
wsbh t0, $r_A
seh $r_A, t0
wsbh $r_A, $r_A
# else
sll t0, $r_A, 24
andi t1, $r_A, 0xff00
sra t0, t0, 16
srl t1, t1, 8
sll t0, $r_A, 8
srl t1, $r_A, 8
andi t0, t0, 0xff00
or $r_A, t0, t1
# endif
#endif
@ -115,7 +111,7 @@ FEXPORT(sk_load_byte_positive)
is_offset_in_header(1, byte)
/* Offset within header boundaries */
PTR_ADDU t1, $r_skb_data, offset
lb $r_A, 0(t1)
lbu $r_A, 0(t1)
jr $r_ra
move $r_ret, zero
END(sk_load_byte)
@ -139,6 +135,11 @@ FEXPORT(sk_load_byte_positive)
* (void *to) is returned in r_s0
*
*/
#ifdef CONFIG_CPU_LITTLE_ENDIAN
#define DS_OFFSET(SIZE) (4 * SZREG)
#else
#define DS_OFFSET(SIZE) ((4 * SZREG) + (4 - SIZE))
#endif
#define bpf_slow_path_common(SIZE) \
/* Quick check. Are we within reasonable boundaries? */ \
LONG_ADDIU $r_s1, $r_skb_len, -SIZE; \
@ -150,7 +151,7 @@ FEXPORT(sk_load_byte_positive)
PTR_LA t0, skb_copy_bits; \
PTR_S $r_ra, (5 * SZREG)($r_sp); \
/* Assign low slot to a2 */ \
move a2, $r_sp; \
PTR_ADDIU a2, $r_sp, DS_OFFSET(SIZE); \
jalr t0; \
/* Reset our destination slot (DS but it's ok) */ \
INT_S zero, (4 * SZREG)($r_sp); \