Merge branch 'at91/soc' into late/cleanup

* at91/soc:
  ARM: at91: add defconfig for SAMA5
  ARM: at91: dt: add device tree files for SAMA5D3 family
  ARM: at91: introduce SAMA5 support
  ARM: at91: introduce the core type choice to split ARMv4/5 and ARMv7 arch
  ARM: at91: add AT91_SAM9_TIME entry to select at91sam926x_time.c compilation
  ARM: at91: change name template in AT91_SOC_START macro
  ARM: at91: renamme rm9200 dt file
  ARM: at91: rename board-dt to more specific name board-dt-sam9
  ARM: at91: move non DT Kconfig to Kconfig.non_dt

arch/arm/boot/dts/Makefile

@@ -31,6 +31,11 @@ dtb-$(CONFIG_ARCH_AT91) += at91sam9g25ek.dtb
 dtb-$(CONFIG_ARCH_AT91) += at91sam9g35ek.dtb
 dtb-$(CONFIG_ARCH_AT91) += at91sam9x25ek.dtb
 dtb-$(CONFIG_ARCH_AT91) += at91sam9x35ek.dtb
+# sama5d3
+dtb-$(CONFIG_ARCH_AT91)	+= sama5d31ek.dtb
+dtb-$(CONFIG_ARCH_AT91)	+= sama5d33ek.dtb
+dtb-$(CONFIG_ARCH_AT91)	+= sama5d34ek.dtb
+dtb-$(CONFIG_ARCH_AT91)	+= sama5d35ek.dtb
 
 dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
 dtb-$(CONFIG_ARCH_BCM) += bcm11351-brt.dtb

arch/arm/boot/dts/sama5d31ek.dts

@@ -0,0 +1,51 @@
+/*
+ * sama5d31ek.dts - Device Tree file for SAMA5D31-EK board
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+/include/ "sama5d3xmb.dtsi"
+/include/ "sama5d3xdm.dtsi"
+
+/ {
+	model = "Atmel SAMA5D31-EK";
+	compatible = "atmel,sama5d31ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
+
+	ahb {
+		apb {
+			spi0: spi@f0004000 {
+				status = "okay";
+			};
+
+			ssc0: ssc@f0008000 {
+				status = "okay";
+			};
+
+			i2c0: i2c@f0014000 {
+				status = "okay";
+			};
+
+			i2c1: i2c@f0018000 {
+				status = "okay";
+			};
+
+			macb1: ethernet@f802c000 {
+				status = "okay";
+			};
+		};
+	};
+
+	leds {
+		d3 {
+			label = "d3";
+			gpios = <&pioE 24 0>;
+		};
+	};
+
+	sound {
+		status = "okay";
+	};
+};

arch/arm/boot/dts/sama5d33ek.dts

@@ -0,0 +1,44 @@
+/*
+ * sama5d33ek.dts - Device Tree file for SAMA5D33-EK board
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+/include/ "sama5d3xmb.dtsi"
+/include/ "sama5d3xdm.dtsi"
+
+/ {
+	model = "Atmel SAMA5D33-EK";
+	compatible = "atmel,sama5d33ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
+
+	ahb {
+		apb {
+			spi0: spi@f0004000 {
+				status = "okay";
+			};
+
+			ssc0: ssc@f0008000 {
+				status = "okay";
+			};
+
+			i2c0: i2c@f0014000 {
+				status = "okay";
+			};
+
+			i2c1: i2c@f0018000 {
+				status = "okay";
+			};
+
+			macb0: ethernet@f0028000 {
+				status = "okay";
+			};
+		};
+	};
+
+	sound {
+		status = "okay";
+	};
+};

arch/arm/boot/dts/sama5d34ek.dts

@@ -0,0 +1,61 @@
+/*
+ * sama5d34ek.dts - Device Tree file for SAMA5D34-EK board
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+/include/ "sama5d3xmb.dtsi"
+/include/ "sama5d3xdm.dtsi"
+
+/ {
+	model = "Atmel SAMA5D34-EK";
+	compatible = "atmel,sama5d34ek", "atmel,sama5ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
+
+	ahb {
+		apb {
+			spi0: spi@f0004000 {
+				status = "okay";
+			};
+
+			ssc0: ssc@f0008000 {
+				status = "okay";
+			};
+
+			can0: can@f000c000 {
+				status = "okay";
+			};
+
+			i2c0: i2c@f0014000 {
+				status = "okay";
+			};
+
+			i2c1: i2c@f0018000 {
+				status = "okay";
+
+				24c256@50 {
+					compatible = "24c256";
+					reg = <0x50>;
+					pagesize = <64>;
+				};
+			};
+
+			macb0: ethernet@f0028000 {
+				status = "okay";
+			};
+		};
+	};
+
+	leds {
+		d3 {
+			label = "d3";
+			gpios = <&pioE 24 0>;
+		};
+	};
+
+	sound {
+		status = "okay";
+	};
+};

arch/arm/boot/dts/sama5d35ek.dts

@@ -0,0 +1,56 @@
+/*
+ * sama5d35ek.dts - Device Tree file for SAMA5D35-EK board
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+/include/ "sama5d3xmb.dtsi"
+
+/ {
+	model = "Atmel SAMA5D35-EK";
+	compatible = "atmel,sama5d35ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
+
+	ahb {
+		apb {
+			spi0: spi@f0004000 {
+				status = "okay";
+			};
+
+			can0: can@f000c000 {
+				status = "okay";
+			};
+
+			i2c1: i2c@f0018000 {
+				status = "okay";
+			};
+
+			macb0: ethernet@f0028000 {
+				status = "okay";
+			};
+
+			isi: isi@f0034000 {
+				status = "okay";
+			};
+
+			macb1: ethernet@f802c000 {
+				status = "okay";
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pb_user1 {
+			label = "pb_user1";
+			gpios = <&pioE 27 0>;
+			linux,code = <0x100>;
+			gpio-key,wakeup;
+		};
+	};
+};

arch/arm/boot/dts/sama5d3xcm.dtsi

@@ -0,0 +1,91 @@
+/*
+ * sama5d3xcm.dtsi - Device Tree Include file for SAMA5D3x CPU Module
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/include/ "sama5d3.dtsi"
+
+/ {
+	compatible = "atmel,samad3xcm", "atmel,sama5d3", "atmel,sama5";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 rootfstype=ubifs ubi.mtd=5 root=ubi0:rootfs";
+	};
+
+	memory {
+		reg = <0x20000000 0x20000000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		main_clock: clock@0 {
+			compatible = "atmel,osc", "fixed-clock";
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			macb0: ethernet@f0028000 {
+				phy-mode = "rgmii";
+			};
+		};
+
+		nand0: nand@60000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			atmel,has-pmecc;
+			atmel,pmecc-cap = <4>;
+			atmel,pmecc-sector-size = <512>;
+			atmel,has-nfc;
+			atmel,use-nfc-sram;
+			nand-on-flash-bbt;
+			status = "okay";
+
+			at91bootstrap@0 {
+				label = "at91bootstrap";
+				reg = <0x0 0x40000>;
+			};
+
+			bootloader@40000 {
+				label = "bootloader";
+				reg = <0x40000 0x80000>;
+			};
+
+			bootloaderenv@c0000 {
+				label = "bootloader env";
+				reg = <0xc0000 0xc0000>;
+			};
+
+			dtb@180000 {
+				label = "device tree";
+				reg = <0x180000 0x80000>;
+			};
+
+			kernel@200000 {
+				label = "kernel";
+				reg = <0x200000 0x600000>;
+			};
+
+			rootfs@800000 {
+				label = "rootfs";
+				reg = <0x800000 0x0f800000>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		d2 {
+			label = "d2";
+			gpios = <&pioE 25 1>;	/* PE25, conflicts with A25, RXD2 */
+		};
+	};
+};

arch/arm/boot/dts/sama5d3xdm.dtsi

@@ -0,0 +1,42 @@
+/*
+ * sama5d3dm.dtsi - Device Tree file for SAMA5 display module
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/ {
+	ahb {
+		apb {
+			i2c1: i2c@f0018000 {
+				qt1070: keyboard@1b {
+					compatible = "qt1070";
+					reg = <0x1b>;
+					interrupt-parent = <&pioE>;
+					interrupts = <31 0x0>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_qt1070_irq>;
+				};
+			};
+
+			adc0: adc@f8018000 {
+				status = "disabled";
+			};
+
+			tsadcc: tsadcc@f8018000 {
+				status = "okay";
+			};
+
+			pinctrl@fffff200 {
+				board {
+					pinctrl_qt1070_irq: qt1070_irq {
+						atmel,pins =
+							<4 31 0x0 0x5>; /* PE31 GPIO with pull up deglith */
+					};
+				};
+			};
+		};
+	};
+};

arch/arm/boot/dts/sama5d3xmb.dtsi

@@ -0,0 +1,166 @@
+/*
+ * sama5d3xmb.dts - Device Tree file for SAMA5D3x mother board
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/include/ "sama5d3xcm.dtsi"
+
+/ {
+	compatible = "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
+
+	ahb {
+		apb {
+			mmc0: mmc@f0000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioD 17 0>;
+				};
+			};
+
+			spi0: spi@f0004000 {
+				m25p80@0 {
+					compatible = "atmel,at25df321a";
+					spi-max-frequency = <50000000>;
+					reg = <0>;
+				};
+			};
+
+			/*
+			 * i2c0 conflicts with ISI:
+			 * disable it to allow the use of ISI
+			 * can not enable audio when i2c0 disabled
+			 */
+			i2c0: i2c@f0014000 {
+				wm8904: wm8904@1a {
+					compatible = "wm8904";
+					reg = <0x1a>;
+				};
+			};
+
+			usart1: serial@f0020000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
+				status = "okay";
+			};
+
+			isi: isi@f0034000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_isi &pinctrl_isi_pck_as_mck &pinctrl_isi_power &pinctrl_isi_reset>;
+			};
+
+			mmc1: mmc@f8000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioD 18 0>;
+				};
+			};
+
+			adc0: adc@f8018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <
+					&pinctrl_adc0_adtrg
+					&pinctrl_adc0_ad0
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					>;
+				status = "okay";
+			};
+
+			macb1: ethernet@f802c000 {
+				phy-mode = "rmii";
+			};
+
+			pinctrl@fffff200 {
+				board {
+					pinctrl_mmc0_cd: mmc0_cd {
+						atmel,pins =
+							<3 17 0x0 0x5>; /* PD17 GPIO with pullup deglitch */
+					};
+
+					pinctrl_mmc1_cd: mmc1_cd {
+						atmel,pins =
+							<3 18 0x0 0x5>; /* PD18 GPIO with pullup deglitch */
+					};
+
+					pinctrl_pck0_as_audio_mck: pck0_as_audio_mck {
+						atmel,pins =
+							<3 30 0x2 0x0>;	/* PD30 periph B */
+					};
+
+					pinctrl_isi_reset: isi_reset-0 {
+						atmel,pins =
+							<4 24 0x0 0x0>;   /* PE24 gpio */
+					};
+
+					pinctrl_isi_power: isi_power-0 {
+						atmel,pins =
+							<4 29 0x0 0x0>; /* PE29 gpio */
+					};
+
+					pinctrl_usba_vbus: usba_vbus {
+						atmel,pins =
+							<3 29 0x0 0x4>; /* PD29 GPIO with deglitch */
+					};
+				};
+			};
+
+			dbgu: serial@ffffee00 {
+				status = "okay";
+			};
+
+			watchdog@fffffe40 {
+				status = "okay";
+			};
+		};
+
+		usb0: gadget@00500000 {
+			atmel,vbus-gpio = <&pioD 29 0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "okay";
+		};
+
+		usb1: ohci@00600000 {
+			num-ports = <3>;
+			atmel,vbus-gpio = <&pioD 25 0
+					   &pioD 26 1
+					   &pioD 27 1
+					  >;
+			status = "okay";
+		};
+
+		usb2: ehci@00700000 {
+			status = "okay";
+		};
+	};
+
+	sound {
+		compatible = "atmel,sama5d3ek-wm8904";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pck0_as_audio_mck>;
+
+		atmel,model = "wm8904 @ SAMA5D3EK";
+		atmel,audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"IN2L", "Line In Jack",
+			"IN2R", "Line In Jack",
+			"IN1L", "Mic";
+
+		atmel,ssc-controller = <&ssc0>;
+		atmel,audio-codec = <&wm8904>;
+	};
+};

arch/arm/configs/at91_dt_defconfig

@@ -20,7 +20,7 @@ CONFIG_SOC_AT91SAM9263=y
 CONFIG_SOC_AT91SAM9G45=y
 CONFIG_SOC_AT91SAM9X5=y
 CONFIG_SOC_AT91SAM9N12=y
-CONFIG_MACH_AT91SAM_DT=y
+CONFIG_MACH_AT91SAM9_DT=y
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
 CONFIG_AT91_TIMER_HZ=128
 CONFIG_AEABI=y

arch/arm/configs/at91sam9260_defconfig

@@ -22,7 +22,7 @@ CONFIG_MACH_QIL_A9260=y
 CONFIG_MACH_CPU9260=y
 CONFIG_MACH_FLEXIBITY=y
 CONFIG_MACH_SNAPPER_9260=y
-CONFIG_MACH_AT91SAM_DT=y
+CONFIG_MACH_AT91SAM9_DT=y
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
 # CONFIG_ARM_THUMB is not set
 CONFIG_ZBOOT_ROM_TEXT=0x0

arch/arm/configs/at91sam9g20_defconfig

@@ -22,7 +22,7 @@ CONFIG_MACH_PCONTROL_G20=y
 CONFIG_MACH_GSIA18S=y
 CONFIG_MACH_USB_A9G20=y
 CONFIG_MACH_SNAPPER_9260=y
-CONFIG_MACH_AT91SAM_DT=y
+CONFIG_MACH_AT91SAM9_DT=y
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
 # CONFIG_ARM_THUMB is not set
 CONFIG_AEABI=y

arch/arm/configs/at91sam9g45_defconfig

@@ -18,7 +18,7 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_ARCH_AT91=y
 CONFIG_ARCH_AT91SAM9G45=y
 CONFIG_MACH_AT91SAM9M10G45EK=y
-CONFIG_MACH_AT91SAM_DT=y
+CONFIG_MACH_AT91SAM9_DT=y
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
 CONFIG_AT91_SLOW_CLOCK=y
 CONFIG_AEABI=y

arch/arm/configs/sama5_defconfig

@@ -0,0 +1,181 @@
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_IRQ_DOMAIN_DEBUG=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EMBEDDED=y
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_AT91=y
+CONFIG_SOC_SAM_V7=y
+CONFIG_SOC_SAMA5D3=y
+CONFIG_MACH_SAMA5_DT=y
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_UACCESS_WITH_MEMCPY=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw"
+CONFIG_AUTO_ZRELADDR=y
+CONFIG_VFP=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_PM_RUNTIME=y
+CONFIG_PM_DEBUG=y
+CONFIG_PM_ADVANCED_DEBUG=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+CONFIG_IPV6=y
+# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_BEET is not set
+CONFIG_IPV6_SIT_6RD=y
+CONFIG_CAN=y
+CONFIG_CAN_AT91=y
+CONFIG_CFG80211=y
+CONFIG_MAC80211=y
+CONFIG_MAC80211_LEDS=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_ATMEL_TCLIB=y
+CONFIG_ATMEL_SSC=y
+CONFIG_EEPROM_AT24=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_NETDEVICES=y
+CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+CONFIG_MICREL_PHY=y
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_QT1070=y
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ATMEL_MXT=y
+CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y
+# CONFIG_SERIO is not set
+CONFIG_LEGACY_PTY_COUNT=4
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_AT91=y
+CONFIG_I2C_GPIO=y
+CONFIG_SPI=y
+CONFIG_SPI_ATMEL=y
+CONFIG_SPI_GPIO=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HWMON is not set
+CONFIG_SSB=m
+CONFIG_FB=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_HID_GENERIC is not set
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_ACM=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_AT91=y
+CONFIG_USB_MASS_STORAGE=m
+CONFIG_MMC=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+CONFIG_MMC_ATMELMCI=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_AT91RM9200=y
+CONFIG_DMADEVICES=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_IIO=y
+CONFIG_AT91_ADC=y
+CONFIG_EXT2_FS=y
+CONFIG_FANOTIFY=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_UBIFS_FS=y
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_DEBUG_FS=y
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_FTRACE is not set
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_LL=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+CONFIG_CRYPTO_DEV_ATMEL_AES=y
+CONFIG_CRYPTO_DEV_ATMEL_TDES=y
+CONFIG_CRYPTO_DEV_ATMEL_SHA=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC_ITU_T=m

arch/arm/mach-at91/Kconfig

@@ -1,14 +1,15 @@
 if ARCH_AT91
 
-config HAVE_AT91_DATAFLASH_CARD
-	bool
-
 config HAVE_AT91_DBGU0
 	bool
 
 config HAVE_AT91_DBGU1
 	bool
 
+config AT91_PMC_UNIT
+	bool
+	default !ARCH_AT91X40
+
 config AT91_SAM9_ALT_RESET
 	bool
 	default !ARCH_AT91X40
@@ -17,17 +18,59 @@ config AT91_SAM9G45_RESET
 	bool
 	default !ARCH_AT91X40
 
+config AT91_SAM9_TIME
+	bool
+
 config SOC_AT91SAM9
 	bool
+	select AT91_SAM9_TIME
 	select CPU_ARM926T
 	select GENERIC_CLOCKEVENTS
 	select MULTI_IRQ_HANDLER
 	select SPARSE_IRQ
 
+config SOC_SAMA5
+	bool
+	select AT91_SAM9_TIME
+	select CPU_V7
+	select GENERIC_CLOCKEVENTS
+	select MULTI_IRQ_HANDLER
+	select SPARSE_IRQ
+
 menu "Atmel AT91 System-on-Chip"
 
+choice
+
+	prompt "Core type"
+
+config SOC_SAM_V4_V5
+	bool "ARM7/ARM9"
+	help
+	  Select this if you are using one of Atmel's AT91SAM9, AT91RM9200
+	  or AT91X40 SoC.
+
+config SOC_SAM_V7
+	bool "Cortex A5"
+	help
+	  Select this if you are using one of Atmel's SAMA5D3 SoC.
+
+endchoice
+
 comment "Atmel AT91 Processor"
 
+if SOC_SAM_V7
+config SOC_SAMA5D3
+	bool "SAMA5D3 family"
+	depends on SOC_SAM_V7
+	select SOC_SAMA5
+	select HAVE_FB_ATMEL
+	select HAVE_AT91_DBGU1
+	help
+	  Select this if you are using one of Atmel's SAMA5D3 family SoC.
+	  This support covers SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35.
+endif
+
+if SOC_SAM_V4_V5
 config SOC_AT91RM9200
 	bool "AT91RM9200"
 	select CPU_ARM920T
@@ -93,394 +136,10 @@ config SOC_AT91SAM9N12
 	help
 	  Select this if you are using Atmel's AT91SAM9N12 SoC.
 
-choice
-	prompt "Atmel AT91 Processor Devices for non DT boards"
-
-config ARCH_AT91_NONE
-	bool "None"
-
-config ARCH_AT91RM9200
-	bool "AT91RM9200"
-	select SOC_AT91RM9200
-
-config ARCH_AT91SAM9260
-	bool "AT91SAM9260 or AT91SAM9XE"
-	select SOC_AT91SAM9260
-
-config ARCH_AT91SAM9261
-	bool "AT91SAM9261"
-	select SOC_AT91SAM9261
-
-config ARCH_AT91SAM9G10
-	bool "AT91SAM9G10"
-	select SOC_AT91SAM9261
-
-config ARCH_AT91SAM9263
-	bool "AT91SAM9263"
-	select SOC_AT91SAM9263
-
-config ARCH_AT91SAM9RL
-	bool "AT91SAM9RL"
-	select SOC_AT91SAM9RL
-
-config ARCH_AT91SAM9G20
-	bool "AT91SAM9G20"
-	select SOC_AT91SAM9260
-
-config ARCH_AT91SAM9G45
-	bool "AT91SAM9G45"
-	select SOC_AT91SAM9G45
-
-config ARCH_AT91X40
-	bool "AT91x40"
-	depends on !MMU
-	select ARCH_USES_GETTIMEOFFSET
-	select MULTI_IRQ_HANDLER
-	select SPARSE_IRQ
-
-endchoice
-
-config AT91_PMC_UNIT
-	bool
-	default !ARCH_AT91X40
-
 # ----------------------------------------------------------
 
-if ARCH_AT91RM9200
+source arch/arm/mach-at91/Kconfig.non_dt
-
+endif # SOC_SAM_V4_V5
-comment "AT91RM9200 Board Type"
-
-config MACH_ONEARM
-	bool "Ajeco 1ARM Single Board Computer"
-	help
-	  Select this if you are using Ajeco's 1ARM Single Board Computer.
-	  <http://www.ajeco.fi/>
-
-config ARCH_AT91RM9200DK
-	bool "Atmel AT91RM9200-DK Development board"
-	select HAVE_AT91_DATAFLASH_CARD
-	help
-	  Select this if you are using Atmel's AT91RM9200-DK Development board.
-	  (Discontinued)
-
-config MACH_AT91RM9200EK
-	bool "Atmel AT91RM9200-EK Evaluation Kit"
-	select HAVE_AT91_DATAFLASH_CARD
-	help
-	  Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit.
-	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507>
-
-config MACH_CSB337
-	bool "Cogent CSB337"
-	help
-	  Select this if you are using Cogent's CSB337 board.
-	  <http://www.cogcomp.com/csb_csb337.htm>
-
-config MACH_CSB637
-	bool "Cogent CSB637"
-	help
-	  Select this if you are using Cogent's CSB637 board.
-	  <http://www.cogcomp.com/csb_csb637.htm>
-
-config MACH_CARMEVA
-	bool "Conitec ARM&EVA"
-	help
-	  Select this if you are using Conitec's AT91RM9200-MCU-Module.
-	  <http://www.conitec.net/english/linuxboard.php>
-
-config MACH_ATEB9200
-	bool "Embest ATEB9200"
-	help
-	  Select this if you are using Embest's ATEB9200 board.
-	  <http://www.embedinfo.com/english/product/ATEB9200.asp>
-
-config MACH_KB9200
-	bool "KwikByte KB920x"
-	help
-	  Select this if you are using KwikByte's KB920x board.
-	  <http://www.kwikbyte.com/KB9202.html>
-
-config MACH_PICOTUX2XX
-	bool "picotux 200"
-	help
-	  Select this if you are using a picotux 200.
-	  <http://www.picotux.com/>
-
-config MACH_KAFA
-	bool "Sperry-Sun KAFA board"
-	help
-	  Select this if you are using Sperry-Sun's KAFA board.
-
-config MACH_ECBAT91
-	bool "emQbit ECB_AT91 SBC"
-	select HAVE_AT91_DATAFLASH_CARD
-	help
-	  Select this if you are using emQbit's ECB_AT91 board.
-	  <http://wiki.emqbit.com/free-ecb-at91>
-
-config MACH_YL9200
-	bool "ucDragon YL-9200"
-	help
-	  Select this if you are using the ucDragon YL-9200 board.
-
-config MACH_CPUAT91
-	bool "Eukrea CPUAT91"
-	help
-	  Select this if you are using the Eukrea Electromatique's
-	  CPUAT91 board <http://www.eukrea.com/>.
-
-config MACH_ECO920
-	bool "eco920"
-	help
-	  Select this if you are using the eco920 board
-
-config MACH_RSI_EWS
-	bool "RSI Embedded Webserver"
-	depends on ARCH_AT91RM9200
-	help
-	  Select this if you are using RSIs EWS board.
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9260
-
-comment "AT91SAM9260 Variants"
-
-comment "AT91SAM9260 / AT91SAM9XE Board Type"
-
-config MACH_AT91SAM9260EK
-	bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit"
-	select HAVE_AT91_DATAFLASH_CARD
-	help
-	  Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
-	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
-
-config MACH_CAM60
-	bool "KwikByte KB9260 (CAM60) board"
-	help
-	  Select this if you are using KwikByte's KB9260 (CAM60) board based on the Atmel AT91SAM9260.
-	  <http://www.kwikbyte.com/KB9260.html>
-
-config MACH_SAM9_L9260
-	bool "Olimex SAM9-L9260 board"
-	select HAVE_AT91_DATAFLASH_CARD
-	help
-	  Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260.
-	  <http://www.olimex.com/dev/sam9-L9260.html>
-
-config MACH_AFEB9260
-	bool "Custom afeb9260 board v1"
-	help
-	  Select this if you are using custom afeb9260 board based on
-	  open hardware design. Select this for revision 1 of the board.
-	  <svn://194.85.238.22/home/users/george/svn/arm9eb>
-	  <http://groups.google.com/group/arm9fpga-evolution-board>
-
-config MACH_USB_A9260
-	bool "CALAO USB-A9260"
-	help
-	  Select this if you are using a Calao Systems USB-A9260.
-	  <http://www.calao-systems.com>
-
-config MACH_QIL_A9260
-	bool "CALAO QIL-A9260 board"
-	help
-	  Select this if you are using a Calao Systems QIL-A9260 Board.
-	  <http://www.calao-systems.com>
-
-config MACH_CPU9260
-	bool "Eukrea CPU9260 board"
-	help
-	  Select this if you are using a Eukrea Electromatique's
-	  CPU9260 Board <http://www.eukrea.com/>
-
-config MACH_FLEXIBITY
-	bool "Flexibity Connect board"
-	help
-	  Select this if you are using Flexibity Connect board
-	  <http://www.flexibity.com>
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9261
-
-comment "AT91SAM9261 Board Type"
-
-config MACH_AT91SAM9261EK
-	bool "Atmel AT91SAM9261-EK Evaluation Kit"
-	select HAVE_AT91_DATAFLASH_CARD
-	help
-	  Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
-	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9G10
-
-comment "AT91SAM9G10 Board Type"
-
-config MACH_AT91SAM9G10EK
-	bool "Atmel AT91SAM9G10-EK Evaluation Kit"
-	select HAVE_AT91_DATAFLASH_CARD
-	help
-	  Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit.
-	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588>
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9263
-
-comment "AT91SAM9263 Board Type"
-
-config MACH_AT91SAM9263EK
-	bool "Atmel AT91SAM9263-EK Evaluation Kit"
-	select HAVE_AT91_DATAFLASH_CARD
-	help
-	  Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
-	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
-
-config MACH_USB_A9263
-	bool "CALAO USB-A9263"
-	help
-	  Select this if you are using a Calao Systems USB-A9263.
-	  <http://www.calao-systems.com>
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9RL
-
-comment "AT91SAM9RL Board Type"
-
-config MACH_AT91SAM9RLEK
-	bool "Atmel AT91SAM9RL-EK Evaluation Kit"
-	help
-	  Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit.
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9G20
-
-comment "AT91SAM9G20 Board Type"
-
-config MACH_AT91SAM9G20EK
-	bool "Atmel AT91SAM9G20-EK Evaluation Kit"
-	select HAVE_AT91_DATAFLASH_CARD
-	help
-	  Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit
-	  that embeds only one SD/MMC slot.
-
-config MACH_AT91SAM9G20EK_2MMC
-	depends on MACH_AT91SAM9G20EK
-	bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots"
-	help
-	  Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
-	  with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and
-	  onwards.
-	  <http://www.atmel.com/tools/SAM9G20-EK.aspx>
-
-config MACH_CPU9G20
-	bool "Eukrea CPU9G20 board"
-	help
-	  Select this if you are using a Eukrea Electromatique's
-	  CPU9G20 Board <http://www.eukrea.com/>
-
-config MACH_ACMENETUSFOXG20
-	bool "Acme Systems srl FOX Board G20"
-	help
-	  Select this if you are using Acme Systems
-	  FOX Board G20 <http://www.acmesystems.it>
-
-config MACH_PORTUXG20
-	bool "taskit PortuxG20"
-	help
-	  Select this if you are using taskit's PortuxG20.
-	  <http://www.taskit.de/en/>
-
-config MACH_STAMP9G20
-	bool "taskit Stamp9G20 CPU module"
-	help
-	  Select this if you are using taskit's Stamp9G20 CPU module on its
-	  evaluation board.
-	  <http://www.taskit.de/en/>
-
-config MACH_PCONTROL_G20
-	bool "PControl G20 CPU module"
-	help
-	  Select this if you are using taskit's Stamp9G20 CPU module on this
-	  carrier board, beeing the decentralized unit of a building automation
-	  system; featuring nvram, eth-switch, iso-rs485, display, io
-
-config MACH_GSIA18S
-	bool "GS_IA18_S board"
-	help
-	  This enables support for the GS_IA18_S board
-	  produced by GeoSIG Ltd company. This is an internet accelerograph.
-	  <http://www.geosig.com>
-
-config MACH_USB_A9G20
-	bool "CALAO USB-A9G20"
-	depends on ARCH_AT91SAM9G20
-	help
-	  Select this if you are using a Calao Systems USB-A9G20.
-	  <http://www.calao-systems.com>
-
-endif
-
-if (ARCH_AT91SAM9260 || ARCH_AT91SAM9G20)
-comment "AT91SAM9260/AT91SAM9G20 boards"
-
-config MACH_SNAPPER_9260
-        bool "Bluewater Systems Snapper 9260/9G20 module"
-        help
-          Select this if you are using the Bluewater Systems Snapper 9260 or
-          Snapper 9G20 modules.
-          <http://www.bluewatersys.com/>
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9G45
-
-comment "AT91SAM9G45 Board Type"
-
-config MACH_AT91SAM9M10G45EK
-	bool "Atmel AT91SAM9M10G45-EK Evaluation Kits"
-	help
-	  Select this if you are using Atmel's AT91SAM9M10G45-EK Evaluation Kit.
-	  Those boards can be populated with any SoC of AT91SAM9G45 or AT91SAM9M10
-	  families: AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11.
-	  <http://www.atmel.com/tools/SAM9M10-G45-EK.aspx>
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91X40
-
-comment "AT91X40 Board Type"
-
-config MACH_AT91EB01
-	bool "Atmel AT91EB01 Evaluation Kit"
-	help
-	  Select this if you are using Atmel's AT91EB01 Evaluation Kit.
-	  It is also a popular target for simulators such as GDB's
-	  ARM simulator (commonly known as the ARMulator) and the
-	  Skyeye simulator.
-
-endif
-
-# ----------------------------------------------------------
 
 comment "Generic Board Type"
 
@@ -492,7 +151,7 @@ config MACH_AT91RM9200_DT
 	  Select this if you want to experiment device-tree with
 	  an Atmel RM9200 Evaluation Kit.
 
-config MACH_AT91SAM_DT
+config MACH_AT91SAM9_DT
 	bool "Atmel AT91SAM Evaluation Kits with device-tree support"
 	depends on SOC_AT91SAM9
 	select USE_OF
@@ -500,15 +159,13 @@ config MACH_AT91SAM_DT
 	  Select this if you want to experiment device-tree with
 	  an Atmel Evaluation Kit.
 
-# ----------------------------------------------------------
+config MACH_SAMA5_DT
-
+	bool "Atmel SAMA5 Evaluation Kits with device-tree support"
-comment "AT91 Board Options"
+	depends on SOC_SAMA5
-
+	select USE_OF
-config MTD_AT91_DATAFLASH_CARD
-	bool "Enable DataFlash Card support"
-	depends on HAVE_AT91_DATAFLASH_CARD
 	help
-	  Enable support for the DataFlash card.
+	  Select this if you want to experiment device-tree with
+	  an Atmel Evaluation Kit.
 
 # ----------------------------------------------------------
 

arch/arm/mach-at91/Kconfig.non_dt

@@ -0,0 +1,399 @@
+menu "Atmel Non-DT world"
+
+config HAVE_AT91_DATAFLASH_CARD
+	bool
+
+choice
+	prompt "Atmel AT91 Processor Devices for non DT boards"
+
+config ARCH_AT91_NONE
+	bool "None"
+
+config ARCH_AT91RM9200
+	bool "AT91RM9200"
+	select SOC_AT91RM9200
+
+config ARCH_AT91SAM9260
+	bool "AT91SAM9260 or AT91SAM9XE"
+	select SOC_AT91SAM9260
+
+config ARCH_AT91SAM9261
+	bool "AT91SAM9261"
+	select SOC_AT91SAM9261
+
+config ARCH_AT91SAM9G10
+	bool "AT91SAM9G10"
+	select SOC_AT91SAM9261
+
+config ARCH_AT91SAM9263
+	bool "AT91SAM9263"
+	select SOC_AT91SAM9263
+
+config ARCH_AT91SAM9RL
+	bool "AT91SAM9RL"
+	select SOC_AT91SAM9RL
+
+config ARCH_AT91SAM9G20
+	bool "AT91SAM9G20"
+	select SOC_AT91SAM9260
+
+config ARCH_AT91SAM9G45
+	bool "AT91SAM9G45"
+	select SOC_AT91SAM9G45
+
+config ARCH_AT91X40
+	bool "AT91x40"
+	depends on !MMU
+	select ARCH_USES_GETTIMEOFFSET
+	select MULTI_IRQ_HANDLER
+	select SPARSE_IRQ
+
+endchoice
+
+# ----------------------------------------------------------
+
+if ARCH_AT91RM9200
+
+comment "AT91RM9200 Board Type"
+
+config MACH_ONEARM
+	bool "Ajeco 1ARM Single Board Computer"
+	help
+	  Select this if you are using Ajeco's 1ARM Single Board Computer.
+	  <http://www.ajeco.fi/>
+
+config ARCH_AT91RM9200DK
+	bool "Atmel AT91RM9200-DK Development board"
+	select HAVE_AT91_DATAFLASH_CARD
+	help
+	  Select this if you are using Atmel's AT91RM9200-DK Development board.
+	  (Discontinued)
+
+config MACH_AT91RM9200EK
+	bool "Atmel AT91RM9200-EK Evaluation Kit"
+	select HAVE_AT91_DATAFLASH_CARD
+	help
+	  Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit.
+	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507>
+
+config MACH_CSB337
+	bool "Cogent CSB337"
+	help
+	  Select this if you are using Cogent's CSB337 board.
+	  <http://www.cogcomp.com/csb_csb337.htm>
+
+config MACH_CSB637
+	bool "Cogent CSB637"
+	help
+	  Select this if you are using Cogent's CSB637 board.
+	  <http://www.cogcomp.com/csb_csb637.htm>
+
+config MACH_CARMEVA
+	bool "Conitec ARM&EVA"
+	help
+	  Select this if you are using Conitec's AT91RM9200-MCU-Module.
+	  <http://www.conitec.net/english/linuxboard.php>
+
+config MACH_ATEB9200
+	bool "Embest ATEB9200"
+	help
+	  Select this if you are using Embest's ATEB9200 board.
+	  <http://www.embedinfo.com/english/product/ATEB9200.asp>
+
+config MACH_KB9200
+	bool "KwikByte KB920x"
+	help
+	  Select this if you are using KwikByte's KB920x board.
+	  <http://www.kwikbyte.com/KB9202.html>
+
+config MACH_PICOTUX2XX
+	bool "picotux 200"
+	help
+	  Select this if you are using a picotux 200.
+	  <http://www.picotux.com/>
+
+config MACH_KAFA
+	bool "Sperry-Sun KAFA board"
+	help
+	  Select this if you are using Sperry-Sun's KAFA board.
+
+config MACH_ECBAT91
+	bool "emQbit ECB_AT91 SBC"
+	select HAVE_AT91_DATAFLASH_CARD
+	help
+	  Select this if you are using emQbit's ECB_AT91 board.
+	  <http://wiki.emqbit.com/free-ecb-at91>
+
+config MACH_YL9200
+	bool "ucDragon YL-9200"
+	help
+	  Select this if you are using the ucDragon YL-9200 board.
+
+config MACH_CPUAT91
+	bool "Eukrea CPUAT91"
+	help
+	  Select this if you are using the Eukrea Electromatique's
+	  CPUAT91 board <http://www.eukrea.com/>.
+
+config MACH_ECO920
+	bool "eco920"
+	help
+	  Select this if you are using the eco920 board
+
+config MACH_RSI_EWS
+	bool "RSI Embedded Webserver"
+	depends on ARCH_AT91RM9200
+	help
+	  Select this if you are using RSIs EWS board.
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9260
+
+comment "AT91SAM9260 Variants"
+
+comment "AT91SAM9260 / AT91SAM9XE Board Type"
+
+config MACH_AT91SAM9260EK
+	bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit"
+	select HAVE_AT91_DATAFLASH_CARD
+	help
+	  Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
+	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
+
+config MACH_CAM60
+	bool "KwikByte KB9260 (CAM60) board"
+	help
+	  Select this if you are using KwikByte's KB9260 (CAM60) board based on the Atmel AT91SAM9260.
+	  <http://www.kwikbyte.com/KB9260.html>
+
+config MACH_SAM9_L9260
+	bool "Olimex SAM9-L9260 board"
+	select HAVE_AT91_DATAFLASH_CARD
+	help
+	  Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260.
+	  <http://www.olimex.com/dev/sam9-L9260.html>
+
+config MACH_AFEB9260
+	bool "Custom afeb9260 board v1"
+	help
+	  Select this if you are using custom afeb9260 board based on
+	  open hardware design. Select this for revision 1 of the board.
+	  <svn://194.85.238.22/home/users/george/svn/arm9eb>
+	  <http://groups.google.com/group/arm9fpga-evolution-board>
+
+config MACH_USB_A9260
+	bool "CALAO USB-A9260"
+	help
+	  Select this if you are using a Calao Systems USB-A9260.
+	  <http://www.calao-systems.com>
+
+config MACH_QIL_A9260
+	bool "CALAO QIL-A9260 board"
+	help
+	  Select this if you are using a Calao Systems QIL-A9260 Board.
+	  <http://www.calao-systems.com>
+
+config MACH_CPU9260
+	bool "Eukrea CPU9260 board"
+	help
+	  Select this if you are using a Eukrea Electromatique's
+	  CPU9260 Board <http://www.eukrea.com/>
+
+config MACH_FLEXIBITY
+	bool "Flexibity Connect board"
+	help
+	  Select this if you are using Flexibity Connect board
+	  <http://www.flexibity.com>
+
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9261
+
+comment "AT91SAM9261 Board Type"
+
+config MACH_AT91SAM9261EK
+	bool "Atmel AT91SAM9261-EK Evaluation Kit"
+	select HAVE_AT91_DATAFLASH_CARD
+	help
+	  Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
+	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
+
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9G10
+
+comment "AT91SAM9G10 Board Type"
+
+config MACH_AT91SAM9G10EK
+	bool "Atmel AT91SAM9G10-EK Evaluation Kit"
+	select HAVE_AT91_DATAFLASH_CARD
+	help
+	  Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit.
+	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588>
+
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9263
+
+comment "AT91SAM9263 Board Type"
+
+config MACH_AT91SAM9263EK
+	bool "Atmel AT91SAM9263-EK Evaluation Kit"
+	select HAVE_AT91_DATAFLASH_CARD
+	help
+	  Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
+	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
+
+config MACH_USB_A9263
+	bool "CALAO USB-A9263"
+	help
+	  Select this if you are using a Calao Systems USB-A9263.
+	  <http://www.calao-systems.com>
+
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9RL
+
+comment "AT91SAM9RL Board Type"
+
+config MACH_AT91SAM9RLEK
+	bool "Atmel AT91SAM9RL-EK Evaluation Kit"
+	help
+	  Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit.
+
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9G20
+
+comment "AT91SAM9G20 Board Type"
+
+config MACH_AT91SAM9G20EK
+	bool "Atmel AT91SAM9G20-EK Evaluation Kit"
+	select HAVE_AT91_DATAFLASH_CARD
+	help
+	  Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit
+	  that embeds only one SD/MMC slot.
+
+config MACH_AT91SAM9G20EK_2MMC
+	depends on MACH_AT91SAM9G20EK
+	bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots"
+	help
+	  Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
+	  with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and
+	  onwards.
+	  <http://www.atmel.com/tools/SAM9G20-EK.aspx>
+
+config MACH_CPU9G20
+	bool "Eukrea CPU9G20 board"
+	help
+	  Select this if you are using a Eukrea Electromatique's
+	  CPU9G20 Board <http://www.eukrea.com/>
+
+config MACH_ACMENETUSFOXG20
+	bool "Acme Systems srl FOX Board G20"
+	help
+	  Select this if you are using Acme Systems
+	  FOX Board G20 <http://www.acmesystems.it>
+
+config MACH_PORTUXG20
+	bool "taskit PortuxG20"
+	help
+	  Select this if you are using taskit's PortuxG20.
+	  <http://www.taskit.de/en/>
+
+config MACH_STAMP9G20
+	bool "taskit Stamp9G20 CPU module"
+	help
+	  Select this if you are using taskit's Stamp9G20 CPU module on its
+	  evaluation board.
+	  <http://www.taskit.de/en/>
+
+config MACH_PCONTROL_G20
+	bool "PControl G20 CPU module"
+	help
+	  Select this if you are using taskit's Stamp9G20 CPU module on this
+	  carrier board, beeing the decentralized unit of a building automation
+	  system; featuring nvram, eth-switch, iso-rs485, display, io
+
+config MACH_GSIA18S
+	bool "GS_IA18_S board"
+	help
+	  This enables support for the GS_IA18_S board
+	  produced by GeoSIG Ltd company. This is an internet accelerograph.
+	  <http://www.geosig.com>
+
+config MACH_USB_A9G20
+	bool "CALAO USB-A9G20"
+	depends on ARCH_AT91SAM9G20
+	help
+	  Select this if you are using a Calao Systems USB-A9G20.
+	  <http://www.calao-systems.com>
+
+endif
+
+if (ARCH_AT91SAM9260 || ARCH_AT91SAM9G20)
+comment "AT91SAM9260/AT91SAM9G20 boards"
+
+config MACH_SNAPPER_9260
+        bool "Bluewater Systems Snapper 9260/9G20 module"
+        help
+          Select this if you are using the Bluewater Systems Snapper 9260 or
+          Snapper 9G20 modules.
+          <http://www.bluewatersys.com/>
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9G45
+
+comment "AT91SAM9G45 Board Type"
+
+config MACH_AT91SAM9M10G45EK
+	bool "Atmel AT91SAM9M10G45-EK Evaluation Kits"
+	help
+	  Select this if you are using Atmel's AT91SAM9M10G45-EK Evaluation Kit.
+	  Those boards can be populated with any SoC of AT91SAM9G45 or AT91SAM9M10
+	  families: AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11.
+	  <http://www.atmel.com/tools/SAM9M10-G45-EK.aspx>
+
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91X40
+
+comment "AT91X40 Board Type"
+
+config MACH_AT91EB01
+	bool "Atmel AT91EB01 Evaluation Kit"
+	help
+	  Select this if you are using Atmel's AT91EB01 Evaluation Kit.
+	  It is also a popular target for simulators such as GDB's
+	  ARM simulator (commonly known as the ARMulator) and the
+	  Skyeye simulator.
+
+endif
+
+# ----------------------------------------------------------
+
+comment "AT91 Board Options"
+
+config MTD_AT91_DATAFLASH_CARD
+	bool "Enable DataFlash Card support"
+	depends on HAVE_AT91_DATAFLASH_CARD
+	help
+	  Enable support for the DataFlash card.
+
+endmenu

arch/arm/mach-at91/Makefile

@@ -10,7 +10,8 @@ obj-		:=
 obj-$(CONFIG_AT91_PMC_UNIT)	+= clock.o
 obj-$(CONFIG_AT91_SAM9_ALT_RESET) += at91sam9_alt_reset.o
 obj-$(CONFIG_AT91_SAM9G45_RESET) += at91sam9g45_reset.o
-obj-$(CONFIG_SOC_AT91SAM9)	+= at91sam926x_time.o sam9_smc.o
+obj-$(CONFIG_AT91_SAM9_TIME)	+= at91sam926x_time.o
+obj-$(CONFIG_SOC_AT91SAM9)	+= sam9_smc.o
 
 # CPU-specific support
 obj-$(CONFIG_SOC_AT91RM9200)	+= at91rm9200.o at91rm9200_time.o
@@ -21,6 +22,7 @@ obj-$(CONFIG_SOC_AT91SAM9G45)	+= at91sam9g45.o
 obj-$(CONFIG_SOC_AT91SAM9N12)	+= at91sam9n12.o
 obj-$(CONFIG_SOC_AT91SAM9X5)	+= at91sam9x5.o
 obj-$(CONFIG_SOC_AT91SAM9RL)	+= at91sam9rl.o
+obj-$(CONFIG_SOC_SAMA5D3)	+= sama5d3.o
 
 obj-$(CONFIG_ARCH_AT91RM9200)	+= at91rm9200_devices.o
 obj-$(CONFIG_ARCH_AT91SAM9260)	+= at91sam9260_devices.o
@@ -87,8 +89,11 @@ obj-$(CONFIG_MACH_SNAPPER_9260)	+= board-snapper9260.o
 obj-$(CONFIG_MACH_AT91SAM9M10G45EK) += board-sam9m10g45ek.o
 
 # AT91SAM board with device-tree
-obj-$(CONFIG_MACH_AT91RM9200_DT) += board-rm9200-dt.o
+obj-$(CONFIG_MACH_AT91RM9200_DT) += board-dt-rm9200.o
-obj-$(CONFIG_MACH_AT91SAM_DT) += board-dt.o
+obj-$(CONFIG_MACH_AT91SAM9_DT) += board-dt-sam9.o
+
+# SAMA5 board with device-tree
+obj-$(CONFIG_MACH_SAMA5_DT) += board-dt-sama5.o
 
 # AT91X40 board-specific support
 obj-$(CONFIG_MACH_AT91EB01)	+= board-eb01.o

arch/arm/mach-at91/at91rm9200.c

@@ -384,7 +384,7 @@ static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = {
 	0	/* Advanced Interrupt Controller (IRQ6) */
 };
 
-AT91_SOC_START(rm9200)
+AT91_SOC_START(at91rm9200)
 	.map_io = at91rm9200_map_io,
 	.default_irq_priority = at91rm9200_default_irq_priority,
 	.ioremap_registers = at91rm9200_ioremap_registers,

arch/arm/mach-at91/at91sam9260.c

@@ -395,7 +395,7 @@ static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = {
 	0,	/* Advanced Interrupt Controller */
 };
 
-AT91_SOC_START(sam9260)
+AT91_SOC_START(at91sam9260)
 	.map_io = at91sam9260_map_io,
 	.default_irq_priority = at91sam9260_default_irq_priority,
 	.ioremap_registers = at91sam9260_ioremap_registers,

arch/arm/mach-at91/at91sam9261.c

@@ -337,7 +337,7 @@ static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = {
 	0,	/* Advanced Interrupt Controller */
 };
 
-AT91_SOC_START(sam9261)
+AT91_SOC_START(at91sam9261)
 	.map_io = at91sam9261_map_io,
 	.default_irq_priority = at91sam9261_default_irq_priority,
 	.ioremap_registers = at91sam9261_ioremap_registers,

arch/arm/mach-at91/at91sam9263.c

@@ -374,7 +374,7 @@ static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = {
 	0,	/* Advanced Interrupt Controller (IRQ1) */
 };
 
-AT91_SOC_START(sam9263)
+AT91_SOC_START(at91sam9263)
 	.map_io = at91sam9263_map_io,
 	.default_irq_priority = at91sam9263_default_irq_priority,
 	.ioremap_registers = at91sam9263_ioremap_registers,

arch/arm/mach-at91/at91sam9g45.c

@@ -418,7 +418,7 @@ static unsigned int at91sam9g45_default_irq_priority[NR_AIC_IRQS] __initdata = {
 	0,	/* Advanced Interrupt Controller (IRQ0) */
 };
 
-AT91_SOC_START(sam9g45)
+AT91_SOC_START(at91sam9g45)
 	.map_io = at91sam9g45_map_io,
 	.default_irq_priority = at91sam9g45_default_irq_priority,
 	.ioremap_registers = at91sam9g45_ioremap_registers,

arch/arm/mach-at91/at91sam9n12.c

@@ -226,7 +226,7 @@ void __init at91sam9n12_initialize(void)
 	at91_extern_irq = (1 << AT91SAM9N12_ID_IRQ0);
 }
 
-AT91_SOC_START(sam9n12)
+AT91_SOC_START(at91sam9n12)
 	.map_io = at91sam9n12_map_io,
 	.register_clocks = at91sam9n12_register_clocks,
 	.init = at91sam9n12_initialize,

arch/arm/mach-at91/at91sam9rl.c

@@ -340,7 +340,7 @@ static unsigned int at91sam9rl_default_irq_priority[NR_AIC_IRQS] __initdata = {
 	0,	/* Advanced Interrupt Controller */
 };
 
-AT91_SOC_START(sam9rl)
+AT91_SOC_START(at91sam9rl)
 	.map_io = at91sam9rl_map_io,
 	.default_irq_priority = at91sam9rl_default_irq_priority,
 	.ioremap_registers = at91sam9rl_ioremap_registers,

arch/arm/mach-at91/at91sam9x5.c

@@ -320,7 +320,7 @@ static void __init at91sam9x5_map_io(void)
  *  Interrupt initialization
  * -------------------------------------------------------------------- */
 
-AT91_SOC_START(sam9x5)
+AT91_SOC_START(at91sam9x5)
 	.map_io = at91sam9x5_map_io,
 	.register_clocks = at91sam9x5_register_clocks,
 AT91_SOC_END

arch/arm/mach-at91/board-dt-sama5.c

@@ -0,0 +1,86 @@
+/*
+ *  Setup code for SAMA5 Evaluation Kits with Device Tree support
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <linux/micrel_phy.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/phy.h>
+
+#include <asm/setup.h>
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include "at91_aic.h"
+#include "generic.h"
+
+
+static const struct of_device_id irq_of_match[] __initconst = {
+
+	{ .compatible = "atmel,sama5d3-aic", .data = at91_aic5_of_init },
+	{ /*sentinel*/ }
+};
+
+static void __init at91_dt_init_irq(void)
+{
+	of_irq_init(irq_of_match);
+}
+
+static int ksz9021rn_phy_fixup(struct phy_device *phy)
+{
+	int value;
+
+#define GMII_RCCPSR	260
+#define GMII_RRDPSR	261
+#define GMII_ERCR	11
+#define GMII_ERDWR	12
+
+	/* Set delay values */
+	value = GMII_RCCPSR | 0x8000;
+	phy_write(phy, GMII_ERCR, value);
+	value = 0xF2F4;
+	phy_write(phy, GMII_ERDWR, value);
+	value = GMII_RRDPSR | 0x8000;
+	phy_write(phy, GMII_ERCR, value);
+	value = 0x2222;
+	phy_write(phy, GMII_ERDWR, value);
+
+	return 0;
+}
+
+static void __init sama5_dt_device_init(void)
+{
+	if (of_machine_is_compatible("atmel,sama5d3xcm"))
+		phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK,
+			ksz9021rn_phy_fixup);
+
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static const char *sama5_dt_board_compat[] __initdata = {
+	"atmel,sama5",
+	NULL
+};
+
+DT_MACHINE_START(sama5_dt, "Atmel SAMA5 (Device Tree)")
+	/* Maintainer: Atmel */
+	.init_time	= at91sam926x_pit_init,
+	.map_io		= at91_map_io,
+	.handle_irq	= at91_aic5_handle_irq,
+	.init_early	= at91_dt_initialize,
+	.init_irq	= at91_dt_init_irq,
+	.init_machine	= sama5_dt_device_init,
+	.dt_compat	= sama5_dt_board_compat,
+MACHINE_END

arch/arm/mach-at91/clock.c

@@ -54,7 +54,10 @@ EXPORT_SYMBOL_GPL(at91_pmc_base);
  */
 #define cpu_has_utmi()		(  cpu_is_at91sam9rl() \
 				|| cpu_is_at91sam9g45() \
-				|| cpu_is_at91sam9x5())
+				|| cpu_is_at91sam9x5() \
+				|| cpu_is_sama5d3())
+
+#define cpu_has_1056M_plla()	(cpu_is_sama5d3())
 
 #define cpu_has_800M_plla()	(  cpu_is_at91sam9g20() \
 				|| cpu_is_at91sam9g45() \
@@ -75,7 +78,8 @@ EXPORT_SYMBOL_GPL(at91_pmc_base);
 				|| cpu_is_at91sam9n12()))
 
 #define cpu_has_upll()		(cpu_is_at91sam9g45() \
-				|| cpu_is_at91sam9x5())
+				|| cpu_is_at91sam9x5() \
+				|| cpu_is_sama5d3())
 
 /* USB host HS & FS */
 #define cpu_has_uhp()		(!cpu_is_at91sam9rl())
@@ -83,18 +87,22 @@ EXPORT_SYMBOL_GPL(at91_pmc_base);
 /* USB device FS only */
 #define cpu_has_udpfs()		(!(cpu_is_at91sam9rl() \
 				|| cpu_is_at91sam9g45() \
-				|| cpu_is_at91sam9x5()))
+				|| cpu_is_at91sam9x5() \
+				|| cpu_is_sama5d3()))
 
 #define cpu_has_plladiv2()	(cpu_is_at91sam9g45() \
 				|| cpu_is_at91sam9x5() \
-				|| cpu_is_at91sam9n12())
+				|| cpu_is_at91sam9n12() \
+				|| cpu_is_sama5d3())
 
 #define cpu_has_mdiv3()		(cpu_is_at91sam9g45() \
 				|| cpu_is_at91sam9x5() \
-				|| cpu_is_at91sam9n12())
+				|| cpu_is_at91sam9n12() \
+				|| cpu_is_sama5d3())
 
 #define cpu_has_alt_prescaler()	(cpu_is_at91sam9x5() \
-				|| cpu_is_at91sam9n12())
+				|| cpu_is_at91sam9n12() \
+				|| cpu_is_sama5d3())
 
 static LIST_HEAD(clocks);
 static DEFINE_SPINLOCK(clk_lock);
@@ -210,10 +218,26 @@ struct clk mck = {
 
 static void pmc_periph_mode(struct clk *clk, int is_on)
 {
-	if (is_on)
+	u32 regval = 0;
-		at91_pmc_write(AT91_PMC_PCER, clk->pmc_mask);
+
-	else
+	/*
-		at91_pmc_write(AT91_PMC_PCDR, clk->pmc_mask);
+	 * With sama5d3 devices, we are managing clock division so we have to
+	 * use the Peripheral Control Register introduced from at91sam9x5
+	 * devices.
+	 */
+	if (cpu_is_sama5d3()) {
+		regval |= AT91_PMC_PCR_CMD; /* write command */
+		regval |= clk->pid & AT91_PMC_PCR_PID; /* peripheral selection */
+		regval |= AT91_PMC_PCR_DIV(clk->div);
+		if (is_on)
+			regval |= AT91_PMC_PCR_EN; /* enable clock */
+		at91_pmc_write(AT91_PMC_PCR, regval);
+	} else {
+		if (is_on)
+			at91_pmc_write(AT91_PMC_PCER, clk->pmc_mask);
+		else
+			at91_pmc_write(AT91_PMC_PCDR, clk->pmc_mask);
+	}
 }
 
 static struct clk __init *at91_css_to_clk(unsigned long css)
@@ -443,14 +467,18 @@ static void __init init_programmable_clock(struct clk *clk)
 
 static int at91_clk_show(struct seq_file *s, void *unused)
 {
-	u32		scsr, pcsr, uckr = 0, sr;
+	u32		scsr, pcsr, pcsr1 = 0, uckr = 0, sr;
 	struct clk	*clk;
 
 	scsr = at91_pmc_read(AT91_PMC_SCSR);
 	pcsr = at91_pmc_read(AT91_PMC_PCSR);
+	if (cpu_is_sama5d3())
+		pcsr1 = at91_pmc_read(AT91_PMC_PCSR1);
 	sr = at91_pmc_read(AT91_PMC_SR);
 	seq_printf(s, "SCSR = %8x\n", scsr);
 	seq_printf(s, "PCSR = %8x\n", pcsr);
+	if (cpu_is_sama5d3())
+		seq_printf(s, "PCSR1 = %8x\n", pcsr1);
 	seq_printf(s, "MOR  = %8x\n", at91_pmc_read(AT91_CKGR_MOR));
 	seq_printf(s, "MCFR = %8x\n", at91_pmc_read(AT91_CKGR_MCFR));
 	seq_printf(s, "PLLA = %8x\n", at91_pmc_read(AT91_CKGR_PLLAR));
@@ -470,20 +498,30 @@ static int at91_clk_show(struct seq_file *s, void *unused)
 	list_for_each_entry(clk, &clocks, node) {
 		char	*state;
 
-		if (clk->mode == pmc_sys_mode)
+		if (clk->mode == pmc_sys_mode) {
 			state = (scsr & clk->pmc_mask) ? "on" : "off";
-		else if (clk->mode == pmc_periph_mode)
+		} else if (clk->mode == pmc_periph_mode) {
-			state = (pcsr & clk->pmc_mask) ? "on" : "off";
+			if (cpu_is_sama5d3()) {
-		else if (clk->mode == pmc_uckr_mode)
+				u32 pmc_mask = 1 << (clk->pid % 32);
-			state = (uckr & clk->pmc_mask) ? "on" : "off";
-		else if (clk->pmc_mask)
-			state = (sr & clk->pmc_mask) ? "on" : "off";
-		else if (clk == &clk32k || clk == &main_clk)
-			state = "on";
-		else
-			state = "";
 
-		seq_printf(s, "%-10s users=%2d %-3s %9ld Hz %s\n",
+				if (clk->pid > 31)
+					state = (pcsr1 & pmc_mask) ? "on" : "off";
+				else
+					state = (pcsr & pmc_mask) ? "on" : "off";
+			} else {
+				state = (pcsr & clk->pmc_mask) ? "on" : "off";
+			}
+		} else if (clk->mode == pmc_uckr_mode) {
+			state = (uckr & clk->pmc_mask) ? "on" : "off";
+		} else if (clk->pmc_mask) {
+			state = (sr & clk->pmc_mask) ? "on" : "off";
+		} else if (clk == &clk32k || clk == &main_clk) {
+			state = "on";
+		} else {
+			state = "";
+		}
+
+		seq_printf(s, "%-10s users=%2d %-3s %9lu Hz %s\n",
 			clk->name, clk->users, state, clk_get_rate(clk),
 			clk->parent ? clk->parent->name : "");
 	}
@@ -530,6 +568,9 @@ int __init clk_register(struct clk *clk)
 	if (clk_is_peripheral(clk)) {
 		if (!clk->parent)
 			clk->parent = &mck;
+		if (cpu_is_sama5d3())
+			clk->rate_hz = DIV_ROUND_UP(clk->parent->rate_hz,
+						    1 << clk->div);
 		clk->mode = pmc_periph_mode;
 	}
 	else if (clk_is_sys(clk)) {
@@ -555,7 +596,11 @@ static u32 __init at91_pll_rate(struct clk *pll, u32 freq, u32 reg)
 	unsigned mul, div;
 
 	div = reg & 0xff;
-	mul = (reg >> 16) & 0x7ff;
+	if (cpu_is_sama5d3())
+		mul = AT91_PMC3_MUL_GET(reg);
+	else
+		mul = AT91_PMC_MUL_GET(reg);
+
 	if (div && mul) {
 		freq /= div;
 		freq *= mul + 1;
@@ -706,12 +751,15 @@ static int __init at91_pmc_init(unsigned long main_clock)
 
 	/* report if PLLA is more than mildly overclocked */
 	plla.rate_hz = at91_pll_rate(&plla, main_clock, at91_pmc_read(AT91_CKGR_PLLAR));
-	if (cpu_has_300M_plla()) {
+	if (cpu_has_1056M_plla()) {
-		if (plla.rate_hz > 300000000)
+		if (plla.rate_hz > 1056000000)
 			pll_overclock = true;
 	} else if (cpu_has_800M_plla()) {
 		if (plla.rate_hz > 800000000)
 			pll_overclock = true;
+	} else if (cpu_has_300M_plla()) {
+		if (plla.rate_hz > 300000000)
+			pll_overclock = true;
 	} else if (cpu_has_240M_plla()) {
 		if (plla.rate_hz > 240000000)
 			pll_overclock = true;
@@ -872,6 +920,7 @@ int __init at91_clock_init(unsigned long main_clock)
 static int __init at91_clock_reset(void)
 {
 	unsigned long pcdr = 0;
+	unsigned long pcdr1 = 0;
 	unsigned long scdr = 0;
 	struct clk *clk;
 
@@ -879,8 +928,17 @@ static int __init at91_clock_reset(void)
 		if (clk->users > 0)
 			continue;
 
-		if (clk->mode == pmc_periph_mode)
+		if (clk->mode == pmc_periph_mode) {
-			pcdr |= clk->pmc_mask;
+			if (cpu_is_sama5d3()) {
+				u32 pmc_mask = 1 << (clk->pid % 32);
+
+				if (clk->pid > 31)
+					pcdr1 |= pmc_mask;
+				else
+					pcdr |= pmc_mask;
+			} else
+				pcdr |= clk->pmc_mask;
+		}
 
 		if (clk->mode == pmc_sys_mode)
 			scdr |= clk->pmc_mask;
@@ -888,8 +946,9 @@ static int __init at91_clock_reset(void)
 		pr_debug("Clocks: disable unused %s\n", clk->name);
 	}
 
-	at91_pmc_write(AT91_PMC_PCDR, pcdr);
 	at91_pmc_write(AT91_PMC_SCDR, scdr);
+	if (cpu_is_sama5d3())
+		at91_pmc_write(AT91_PMC_PCDR1, pcdr1);
 
 	return 0;
 }

arch/arm/mach-at91/clock.h

@@ -20,7 +20,9 @@ struct clk {
 	const char	*name;		/* unique clock name */
 	struct clk_lookup cl;
 	unsigned long	rate_hz;
+	unsigned	div;		/* parent clock divider */
 	struct clk	*parent;
+	unsigned	pid;		/* peripheral ID */
 	u32		pmc_mask;
 	void		(*mode)(struct clk *, int);
 	unsigned	id:3;		/* PCK0..4, or 32k/main/a/b */

arch/arm/mach-at91/include/mach/at91_pmc.h

@@ -75,6 +75,9 @@ extern void __iomem *at91_pmc_base;
 #define		AT91_PMC_PLLCOUNT	(0x3f  <<  8)		/* PLL Counter */
 #define		AT91_PMC_OUT		(3     << 14)		/* PLL Clock Frequency Range */
 #define		AT91_PMC_MUL		(0x7ff << 16)		/* PLL Multiplier */
+#define		AT91_PMC_MUL_GET(n)	((n) >> 16 & 0x7ff)
+#define		AT91_PMC3_MUL		(0x7f  << 18)		/* PLL Multiplier [SAMA5 only] */
+#define		AT91_PMC3_MUL_GET(n)	((n) >> 18 & 0x7f)
 #define		AT91_PMC_USBDIV		(3     << 28)		/* USB Divisor (PLLB only) */
 #define			AT91_PMC_USBDIV_1		(0 << 28)
 #define			AT91_PMC_USBDIV_2		(1 << 28)
@@ -167,11 +170,18 @@ extern void __iomem *at91_pmc_base;
 #define		AT91_PMC_WPVS		(0x1  <<  0)		/* Write Protect Violation Status */
 #define		AT91_PMC_WPVSRC		(0xffff  <<  8)		/* Write Protect Violation Source */
 
-#define AT91_PMC_PCR		0x10c			/* Peripheral Control Register [some SAM9] */
+#define AT91_PMC_PCER1		0x100			/* Peripheral Clock Enable Register 1 [SAMA5 only]*/
+#define AT91_PMC_PCDR1		0x104			/* Peripheral Clock Enable Register 1 */
+#define AT91_PMC_PCSR1		0x108			/* Peripheral Clock Enable Register 1 */
+
+#define AT91_PMC_PCR		0x10c			/* Peripheral Control Register [some SAM9 and SAMA5] */
 #define		AT91_PMC_PCR_PID	(0x3f  <<  0)		/* Peripheral ID */
-#define		AT91_PMC_PCR_CMD	(0x1  <<  12)		/* Command */
+#define		AT91_PMC_PCR_CMD	(0x1  <<  12)		/* Command (read=0, write=1) */
-#define		AT91_PMC_PCR_DIV	(0x3  <<  16)		/* Divisor Value */
+#define		AT91_PMC_PCR_DIV(n)	((n)  <<  16)		/* Divisor Value */
-#define		AT91_PMC_PCRDIV(n)	(((n) <<  16) & AT91_PMC_PCR_DIV)
+#define			AT91_PMC_PCR_DIV0	0x0			/* Peripheral clock is MCK */
+#define			AT91_PMC_PCR_DIV2	0x2			/* Peripheral clock is MCK/2 */
+#define			AT91_PMC_PCR_DIV4	0x4			/* Peripheral clock is MCK/4 */
+#define			AT91_PMC_PCR_DIV8	0x8			/* Peripheral clock is MCK/8 */
 #define		AT91_PMC_PCR_EN		(0x1  <<  28)		/* Enable */
 
 #endif

arch/arm/mach-at91/include/mach/cpu.h

@@ -36,6 +36,8 @@
 #define ARCH_ID_AT91M40807	0x14080745
 #define ARCH_ID_AT91R40008	0x44000840
 
+#define ARCH_ID_SAMA5D3		0x8A5C07C0
+
 #define ARCH_EXID_AT91SAM9M11	0x00000001
 #define ARCH_EXID_AT91SAM9M10	0x00000002
 #define ARCH_EXID_AT91SAM9G46	0x00000003
@@ -47,6 +49,11 @@
 #define ARCH_EXID_AT91SAM9G25	0x00000003
 #define ARCH_EXID_AT91SAM9X25	0x00000004
 
+#define ARCH_EXID_SAMA5D31	0x00444300
+#define ARCH_EXID_SAMA5D33	0x00414300
+#define ARCH_EXID_SAMA5D34	0x00414301
+#define ARCH_EXID_SAMA5D35	0x00584300
+
 #define ARCH_FAMILY_AT91X92	0x09200000
 #define ARCH_FAMILY_AT91SAM9	0x01900000
 #define ARCH_FAMILY_AT91SAM9XE	0x02900000
@@ -75,6 +82,9 @@ enum at91_soc_type {
 	/* SAM9N12 */
 	AT91_SOC_SAM9N12,
 
+	/* SAMA5D3 */
+	AT91_SOC_SAMA5D3,
+
 	/* Unknown type */
 	AT91_SOC_NONE
 };
@@ -93,6 +103,10 @@ enum at91_soc_subtype {
 	AT91_SOC_SAM9G15, AT91_SOC_SAM9G35, AT91_SOC_SAM9X35,
 	AT91_SOC_SAM9G25, AT91_SOC_SAM9X25,
 
+	/* SAMA5D3 */
+	AT91_SOC_SAMA5D31, AT91_SOC_SAMA5D33, AT91_SOC_SAMA5D34,
+	AT91_SOC_SAMA5D35,
+
 	/* Unknown subtype */
 	AT91_SOC_SUBTYPE_NONE
 };
@@ -187,6 +201,12 @@ static inline int at91_soc_is_detected(void)
 #define cpu_is_at91sam9n12()	(0)
 #endif
 
+#ifdef CONFIG_SOC_SAMA5D3
+#define cpu_is_sama5d3()	(at91_soc_initdata.type == AT91_SOC_SAMA5D3)
+#else
+#define cpu_is_sama5d3()	(0)
+#endif
+
 /*
  * Since this is ARM, we will never run on any AVR32 CPU. But these
  * definitions may reduce clutter in common drivers.

arch/arm/mach-at91/include/mach/sama5d3.h

@@ -0,0 +1,73 @@
+/*
+ * Chip-specific header file for the SAMA5D3 family
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * Common definitions.
+ * Based on SAMA5D3 datasheet.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#ifndef SAMA5D3_H
+#define SAMA5D3_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ		 0	/* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS		 1	/* System Peripherals */
+#define SAMA5D3_ID_DBGU		 2	/* debug Unit (usually no special interrupt line) */
+#define AT91_ID_PIT		 3	/* PIT */
+#define SAMA5D3_ID_WDT		 4	/* Watchdog Timer Interrupt */
+#define SAMA5D3_ID_HSMC		 5	/* Static Memory Controller */
+#define SAMA5D3_ID_PIOA		 6	/* PIOA */
+#define SAMA5D3_ID_PIOB		 7	/* PIOB */
+#define SAMA5D3_ID_PIOC		 8	/* PIOC */
+#define SAMA5D3_ID_PIOD		 9	/* PIOD */
+#define SAMA5D3_ID_PIOE		10	/* PIOE */
+#define SAMA5D3_ID_SMD		11	/* SMD Soft Modem */
+#define SAMA5D3_ID_USART0	12	/* USART0 */
+#define SAMA5D3_ID_USART1	13	/* USART1 */
+#define SAMA5D3_ID_USART2	14	/* USART2 */
+#define SAMA5D3_ID_USART3	15	/* USART3 */
+#define SAMA5D3_ID_UART0	16	/* UART 0 */
+#define SAMA5D3_ID_UART1	17	/* UART 1 */
+#define SAMA5D3_ID_TWI0		18	/* Two-Wire Interface 0 */
+#define SAMA5D3_ID_TWI1		19	/* Two-Wire Interface 1 */
+#define SAMA5D3_ID_TWI2		20	/* Two-Wire Interface 2 */
+#define SAMA5D3_ID_HSMCI0	21	/* MCI */
+#define SAMA5D3_ID_HSMCI1	22	/* MCI */
+#define SAMA5D3_ID_HSMCI2	23	/* MCI */
+#define SAMA5D3_ID_SPI0		24	/* Serial Peripheral Interface 0 */
+#define SAMA5D3_ID_SPI1		25	/* Serial Peripheral Interface 1 */
+#define SAMA5D3_ID_TC0		26	/* Timer Counter 0 */
+#define SAMA5D3_ID_TC1		27	/* Timer Counter 2 */
+#define SAMA5D3_ID_PWM		28	/* Pulse Width Modulation Controller */
+#define SAMA5D3_ID_ADC		29	/* Touch Screen ADC Controller */
+#define SAMA5D3_ID_DMA0		30	/* DMA Controller 0 */
+#define SAMA5D3_ID_DMA1		31	/* DMA Controller 1 */
+#define SAMA5D3_ID_UHPHS	32	/* USB Host High Speed */
+#define SAMA5D3_ID_UDPHS	33	/* USB Device High Speed */
+#define SAMA5D3_ID_GMAC		34	/* Gigabit Ethernet MAC */
+#define SAMA5D3_ID_EMAC		35	/* Ethernet MAC */
+#define SAMA5D3_ID_LCDC		36	/* LCD Controller */
+#define SAMA5D3_ID_ISI		37	/* Image Sensor Interface */
+#define SAMA5D3_ID_SSC0		38	/* Synchronous Serial Controller 0 */
+#define SAMA5D3_ID_SSC1		39	/* Synchronous Serial Controller 1 */
+#define SAMA5D3_ID_CAN0		40	/* CAN Controller 0 */
+#define SAMA5D3_ID_CAN1		41	/* CAN Controller 1 */
+#define SAMA5D3_ID_SHA		42	/* Secure Hash Algorithm */
+#define SAMA5D3_ID_AES		43	/* Advanced Encryption Standard */
+#define SAMA5D3_ID_TDES		44	/* Triple Data Encryption Standard */
+#define SAMA5D3_ID_TRNG		45	/* True Random Generator Number */
+#define SAMA5D3_ID_IRQ0		47	/* Advanced Interrupt Controller (IRQ0) */
+
+/*
+ * Internal Memory
+ */
+#define SAMA5D3_SRAM_BASE	0x00300000	/* Internal SRAM base address */
+#define SAMA5D3_SRAM_SIZE	(128 * SZ_1K)	/* Internal SRAM size (128Kb) */
+
+#endif

arch/arm/mach-at91/sama5d3.c

@@ -0,0 +1,377 @@
+/*
+ *  Chip-specific setup code for the SAMA5D3 family
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/module.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <mach/sama5d3.h>
+#include <mach/at91_pmc.h>
+#include <mach/cpu.h>
+
+#include "soc.h"
+#include "generic.h"
+#include "clock.h"
+#include "sam9_smc.h"
+
+/* --------------------------------------------------------------------
+ *  Clocks
+ * -------------------------------------------------------------------- */
+
+/*
+ * The peripheral clocks.
+ */
+
+static struct clk pioA_clk = {
+	.name		= "pioA_clk",
+	.pid		= SAMA5D3_ID_PIOA,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioB_clk = {
+	.name		= "pioB_clk",
+	.pid		= SAMA5D3_ID_PIOB,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioC_clk = {
+	.name		= "pioC_clk",
+	.pid		= SAMA5D3_ID_PIOC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioD_clk = {
+	.name		= "pioD_clk",
+	.pid		= SAMA5D3_ID_PIOD,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioE_clk = {
+	.name		= "pioE_clk",
+	.pid		= SAMA5D3_ID_PIOE,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart0_clk = {
+	.name		= "usart0_clk",
+	.pid		= SAMA5D3_ID_USART0,
+	.type		= CLK_TYPE_PERIPHERAL,
+	.div		= AT91_PMC_PCR_DIV2,
+};
+static struct clk usart1_clk = {
+	.name		= "usart1_clk",
+	.pid		= SAMA5D3_ID_USART1,
+	.type		= CLK_TYPE_PERIPHERAL,
+	.div		= AT91_PMC_PCR_DIV2,
+};
+static struct clk usart2_clk = {
+	.name		= "usart2_clk",
+	.pid		= SAMA5D3_ID_USART2,
+	.type		= CLK_TYPE_PERIPHERAL,
+	.div		= AT91_PMC_PCR_DIV2,
+};
+static struct clk usart3_clk = {
+	.name		= "usart3_clk",
+	.pid		= SAMA5D3_ID_USART3,
+	.type		= CLK_TYPE_PERIPHERAL,
+	.div		= AT91_PMC_PCR_DIV2,
+};
+static struct clk uart0_clk = {
+	.name		= "uart0_clk",
+	.pid		= SAMA5D3_ID_UART0,
+	.type		= CLK_TYPE_PERIPHERAL,
+	.div		= AT91_PMC_PCR_DIV2,
+};
+static struct clk uart1_clk = {
+	.name		= "uart1_clk",
+	.pid		= SAMA5D3_ID_UART1,
+	.type		= CLK_TYPE_PERIPHERAL,
+	.div		= AT91_PMC_PCR_DIV2,
+};
+static struct clk twi0_clk = {
+	.name		= "twi0_clk",
+	.pid		= SAMA5D3_ID_TWI0,
+	.type		= CLK_TYPE_PERIPHERAL,
+	.div		= AT91_PMC_PCR_DIV2,
+};
+static struct clk twi1_clk = {
+	.name		= "twi1_clk",
+	.pid		= SAMA5D3_ID_TWI1,
+	.type		= CLK_TYPE_PERIPHERAL,
+	.div		= AT91_PMC_PCR_DIV2,
+};
+static struct clk twi2_clk = {
+	.name		= "twi2_clk",
+	.pid		= SAMA5D3_ID_TWI2,
+	.type		= CLK_TYPE_PERIPHERAL,
+	.div		= AT91_PMC_PCR_DIV2,
+};
+static struct clk mmc0_clk = {
+	.name		= "mci0_clk",
+	.pid		= SAMA5D3_ID_HSMCI0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc1_clk = {
+	.name		= "mci1_clk",
+	.pid		= SAMA5D3_ID_HSMCI1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc2_clk = {
+	.name		= "mci2_clk",
+	.pid		= SAMA5D3_ID_HSMCI2,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi0_clk = {
+	.name		= "spi0_clk",
+	.pid		= SAMA5D3_ID_SPI0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi1_clk = {
+	.name		= "spi1_clk",
+	.pid		= SAMA5D3_ID_SPI1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tcb0_clk = {
+	.name		= "tcb0_clk",
+	.pid		= SAMA5D3_ID_TC0,
+	.type		= CLK_TYPE_PERIPHERAL,
+	.div		= AT91_PMC_PCR_DIV2,
+};
+static struct clk tcb1_clk = {
+	.name		= "tcb1_clk",
+	.pid		= SAMA5D3_ID_TC1,
+	.type		= CLK_TYPE_PERIPHERAL,
+	.div		= AT91_PMC_PCR_DIV2,
+};
+static struct clk adc_clk = {
+	.name		= "adc_clk",
+	.pid		= SAMA5D3_ID_ADC,
+	.type		= CLK_TYPE_PERIPHERAL,
+	.div		= AT91_PMC_PCR_DIV2,
+};
+static struct clk adc_op_clk = {
+	.name		= "adc_op_clk",
+	.type		= CLK_TYPE_PERIPHERAL,
+	.rate_hz	= 5000000,
+};
+static struct clk dma0_clk = {
+	.name		= "dma0_clk",
+	.pid		= SAMA5D3_ID_DMA0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk dma1_clk = {
+	.name		= "dma1_clk",
+	.pid		= SAMA5D3_ID_DMA1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk uhphs_clk = {
+	.name		= "uhphs",
+	.pid		= SAMA5D3_ID_UHPHS,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk udphs_clk = {
+	.name		= "udphs_clk",
+	.pid		= SAMA5D3_ID_UDPHS,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+/* gmac only for sama5d33, sama5d34, sama5d35 */
+static struct clk macb0_clk = {
+	.name		= "macb0_clk",
+	.pid		= SAMA5D3_ID_GMAC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+/* emac only for sama5d31, sama5d35 */
+static struct clk macb1_clk = {
+	.name		= "macb1_clk",
+	.pid		= SAMA5D3_ID_EMAC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+/* lcd only for sama5d31, sama5d33, sama5d34 */
+static struct clk lcdc_clk = {
+	.name		= "lcdc_clk",
+	.pid		= SAMA5D3_ID_LCDC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+/* isi only for sama5d33, sama5d35 */
+static struct clk isi_clk = {
+	.name		= "isi_clk",
+	.pid		= SAMA5D3_ID_ISI,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk can0_clk = {
+	.name		= "can0_clk",
+	.pid		= SAMA5D3_ID_CAN0,
+	.type		= CLK_TYPE_PERIPHERAL,
+	.div		= AT91_PMC_PCR_DIV2,
+};
+static struct clk can1_clk = {
+	.name		= "can1_clk",
+	.pid		= SAMA5D3_ID_CAN1,
+	.type		= CLK_TYPE_PERIPHERAL,
+	.div		= AT91_PMC_PCR_DIV2,
+};
+static struct clk ssc0_clk = {
+	.name		= "ssc0_clk",
+	.pid		= SAMA5D3_ID_SSC0,
+	.type		= CLK_TYPE_PERIPHERAL,
+	.div		= AT91_PMC_PCR_DIV2,
+};
+static struct clk ssc1_clk = {
+	.name		= "ssc1_clk",
+	.pid		= SAMA5D3_ID_SSC1,
+	.type		= CLK_TYPE_PERIPHERAL,
+	.div		= AT91_PMC_PCR_DIV2,
+};
+static struct clk sha_clk = {
+	.name		= "sha_clk",
+	.pid		= SAMA5D3_ID_SHA,
+	.type		= CLK_TYPE_PERIPHERAL,
+	.div		= AT91_PMC_PCR_DIV8,
+};
+static struct clk aes_clk = {
+	.name		= "aes_clk",
+	.pid		= SAMA5D3_ID_AES,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tdes_clk = {
+	.name		= "tdes_clk",
+	.pid		= SAMA5D3_ID_TDES,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+
+static struct clk *periph_clocks[] __initdata = {
+	&pioA_clk,
+	&pioB_clk,
+	&pioC_clk,
+	&pioD_clk,
+	&pioE_clk,
+	&usart0_clk,
+	&usart1_clk,
+	&usart2_clk,
+	&usart3_clk,
+	&uart0_clk,
+	&uart1_clk,
+	&twi0_clk,
+	&twi1_clk,
+	&twi2_clk,
+	&mmc0_clk,
+	&mmc1_clk,
+	&mmc2_clk,
+	&spi0_clk,
+	&spi1_clk,
+	&tcb0_clk,
+	&tcb1_clk,
+	&adc_clk,
+	&adc_op_clk,
+	&dma0_clk,
+	&dma1_clk,
+	&uhphs_clk,
+	&udphs_clk,
+	&macb0_clk,
+	&macb1_clk,
+	&lcdc_clk,
+	&isi_clk,
+	&can0_clk,
+	&can1_clk,
+	&ssc0_clk,
+	&ssc1_clk,
+	&sha_clk,
+	&aes_clk,
+	&tdes_clk,
+};
+
+static struct clk pck0 = {
+	.name		= "pck0",
+	.pmc_mask	= AT91_PMC_PCK0,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 0,
+};
+
+static struct clk pck1 = {
+	.name		= "pck1",
+	.pmc_mask	= AT91_PMC_PCK1,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 1,
+};
+
+static struct clk pck2 = {
+	.name		= "pck2",
+	.pmc_mask	= AT91_PMC_PCK2,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 2,
+};
+
+static struct clk_lookup periph_clocks_lookups[] = {
+	/* lookup table for DT entries */
+	CLKDEV_CON_DEV_ID("usart", "ffffee00.serial", &mck),
+	CLKDEV_CON_DEV_ID(NULL, "fffff200.gpio", &pioA_clk),
+	CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioB_clk),
+	CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioC_clk),
+	CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioD_clk),
+	CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioE_clk),
+	CLKDEV_CON_DEV_ID("usart", "f001c000.serial", &usart0_clk),
+	CLKDEV_CON_DEV_ID("usart", "f0020000.serial", &usart1_clk),
+	CLKDEV_CON_DEV_ID("usart", "f8020000.serial", &usart2_clk),
+	CLKDEV_CON_DEV_ID("usart", "f8024000.serial", &usart3_clk),
+	CLKDEV_CON_DEV_ID(NULL, "f0014000.i2c", &twi0_clk),
+	CLKDEV_CON_DEV_ID(NULL, "f0018000.i2c", &twi1_clk),
+	CLKDEV_CON_DEV_ID(NULL, "f801c000.i2c", &twi2_clk),
+	CLKDEV_CON_DEV_ID("mci_clk", "f0000000.mmc", &mmc0_clk),
+	CLKDEV_CON_DEV_ID("mci_clk", "f8000000.mmc", &mmc1_clk),
+	CLKDEV_CON_DEV_ID("mci_clk", "f8004000.mmc", &mmc2_clk),
+	CLKDEV_CON_DEV_ID("spi_clk", "f0004000.spi", &spi0_clk),
+	CLKDEV_CON_DEV_ID("spi_clk", "f8008000.spi", &spi1_clk),
+	CLKDEV_CON_DEV_ID("t0_clk", "f0010000.timer", &tcb0_clk),
+	CLKDEV_CON_DEV_ID("t0_clk", "f8014000.timer", &tcb1_clk),
+	CLKDEV_CON_DEV_ID("tsc_clk", "f8018000.tsadcc", &adc_clk),
+	CLKDEV_CON_DEV_ID("dma_clk", "ffffe600.dma-controller", &dma0_clk),
+	CLKDEV_CON_DEV_ID("dma_clk", "ffffe800.dma-controller", &dma1_clk),
+	CLKDEV_CON_DEV_ID("hclk", "600000.ohci", &uhphs_clk),
+	CLKDEV_CON_DEV_ID("ohci_clk", "600000.ohci", &uhphs_clk),
+	CLKDEV_CON_DEV_ID("ehci_clk", "700000.ehci", &uhphs_clk),
+	CLKDEV_CON_DEV_ID("pclk", "500000.gadget", &udphs_clk),
+	CLKDEV_CON_DEV_ID("hclk", "500000.gadget", &utmi_clk),
+	CLKDEV_CON_DEV_ID("hclk", "f0028000.ethernet", &macb0_clk),
+	CLKDEV_CON_DEV_ID("pclk", "f0028000.ethernet", &macb0_clk),
+	CLKDEV_CON_DEV_ID("hclk", "f802c000.ethernet", &macb1_clk),
+	CLKDEV_CON_DEV_ID("pclk", "f802c000.ethernet", &macb1_clk),
+	CLKDEV_CON_DEV_ID("pclk", "f0008000.ssc", &ssc0_clk),
+	CLKDEV_CON_DEV_ID("pclk", "f000c000.ssc", &ssc1_clk),
+	CLKDEV_CON_DEV_ID("can_clk", "f000c000.can", &can0_clk),
+	CLKDEV_CON_DEV_ID("can_clk", "f8010000.can", &can1_clk),
+	CLKDEV_CON_DEV_ID("sha_clk", "f8034000.sha", &sha_clk),
+	CLKDEV_CON_DEV_ID("aes_clk", "f8038000.aes", &aes_clk),
+	CLKDEV_CON_DEV_ID("tdes_clk", "f803c000.tdes", &tdes_clk),
+};
+
+static void __init sama5d3_register_clocks(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
+		clk_register(periph_clocks[i]);
+
+	clkdev_add_table(periph_clocks_lookups,
+			 ARRAY_SIZE(periph_clocks_lookups));
+
+	clk_register(&pck0);
+	clk_register(&pck1);
+	clk_register(&pck2);
+}
+
+/* --------------------------------------------------------------------
+ *  AT91SAM9x5 processor initialization
+ * -------------------------------------------------------------------- */
+
+static void __init sama5d3_map_io(void)
+{
+	at91_init_sram(0, SAMA5D3_SRAM_BASE, SAMA5D3_SRAM_SIZE);
+}
+
+AT91_SOC_START(sama5d3)
+	.map_io = sama5d3_map_io,
+	.register_clocks = sama5d3_register_clocks,
+AT91_SOC_END

arch/arm/mach-at91/setup.c

@@ -151,6 +151,11 @@ static void __init soc_detect(u32 dbgu_base)
 		at91_soc_initdata.type = AT91_SOC_SAM9N12;
 		at91_boot_soc = at91sam9n12_soc;
 		break;
+
+	case ARCH_ID_SAMA5D3:
+		at91_soc_initdata.type = AT91_SOC_SAMA5D3;
+		at91_boot_soc = sama5d3_soc;
+		break;
 	}
 
 	/* at91sam9g10 */
@@ -206,6 +211,23 @@ static void __init soc_detect(u32 dbgu_base)
 			break;
 		}
 	}
+
+	if (at91_soc_initdata.type == AT91_SOC_SAMA5D3) {
+		switch (at91_soc_initdata.exid) {
+		case ARCH_EXID_SAMA5D31:
+			at91_soc_initdata.subtype = AT91_SOC_SAMA5D31;
+			break;
+		case ARCH_EXID_SAMA5D33:
+			at91_soc_initdata.subtype = AT91_SOC_SAMA5D33;
+			break;
+		case ARCH_EXID_SAMA5D34:
+			at91_soc_initdata.subtype = AT91_SOC_SAMA5D34;
+			break;
+		case ARCH_EXID_SAMA5D35:
+			at91_soc_initdata.subtype = AT91_SOC_SAMA5D35;
+			break;
+		}
+	}
 }
 
 static const char *soc_name[] = {
@@ -219,6 +241,7 @@ static const char *soc_name[] = {
 	[AT91_SOC_SAM9RL]	= "at91sam9rl",
 	[AT91_SOC_SAM9X5]	= "at91sam9x5",
 	[AT91_SOC_SAM9N12]	= "at91sam9n12",
+	[AT91_SOC_SAMA5D3]	= "sama5d3",
 	[AT91_SOC_NONE]		= "Unknown"
 };
 
@@ -241,6 +264,10 @@ static const char *soc_subtype_name[] = {
 	[AT91_SOC_SAM9X35]	= "at91sam9x35",
 	[AT91_SOC_SAM9G25]	= "at91sam9g25",
 	[AT91_SOC_SAM9X25]	= "at91sam9x25",
+	[AT91_SOC_SAMA5D31]	= "sama5d31",
+	[AT91_SOC_SAMA5D33]	= "sama5d33",
+	[AT91_SOC_SAMA5D34]	= "sama5d34",
+	[AT91_SOC_SAMA5D35]	= "sama5d35",
 	[AT91_SOC_SUBTYPE_NONE]	= "Unknown"
 };
 

arch/arm/mach-at91/soc.h

@@ -22,9 +22,10 @@ extern struct at91_init_soc at91sam9g45_soc;
 extern struct at91_init_soc at91sam9rl_soc;
 extern struct at91_init_soc at91sam9x5_soc;
 extern struct at91_init_soc at91sam9n12_soc;
+extern struct at91_init_soc sama5d3_soc;
 
 #define AT91_SOC_START(_name)				\
-struct at91_init_soc __initdata at91##_name##_soc	\
+struct at91_init_soc __initdata _name##_soc		\
  __used							\
 						= {	\
 	.builtin	= 1,				\
@@ -68,3 +69,7 @@ static inline int at91_soc_is_enabled(void)
 #if !defined(CONFIG_SOC_AT91SAM9N12)
 #define at91sam9n12_soc	at91_boot_soc
 #endif
+
+#if !defined(CONFIG_SOC_SAMA5D3)
+#define sama5d3_soc	at91_boot_soc
+#endif