agp: ensure GART has an address before enabling it

Some BIOSs (eg.  the AMI BIOS on the Asus P4P800 motherboard) don't
initialise the GART address, and pcibios_assign_resources() can ignore it
because it can be marked as a host bridge (see
https://bugzilla.kernel.org/show_bug.cgi?id=24392#c5 for details).  This
was handled correctly up to 2.6.35, but the pci_enable_device() cleanup in
2.6.36 96576a9e1a ("agp: intel-agp: do not use PCI resources before
pci_enable_device()") means that the kernel tries to enable the GART
before assigning it an address; in such cases the GART overlaps with other
device assignments and ends up being disabled.

This patch fixes https://bugzilla.kernel.org/show_bug.cgi?id=24392

Note that I imagine efficeon-agp.c probably has the same problem, but
I can't test that and I'd like to make sure this patch is suitable for
-stable (since 2.6.36 and 2.6.37 are affected).

Signed-off-by: Stephen Kitt <steve@sk2.org>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Maciej Rutecki <maciej.rutecki@gmail.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Kulikov Vasiliy <segooon@gmail.com>
Cc: Florian Mickler <florian@mickler.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This commit is contained in:
Stephen Kitt 2011-01-31 14:25:43 -08:00 committed by Dave Airlie
parent cecd1455bc
commit a70b95c017

View File

@ -773,21 +773,15 @@ static int __devinit agp_intel_probe(struct pci_dev *pdev,
dev_info(&pdev->dev, "Intel %s Chipset\n", intel_agp_chipsets[i].name);
/*
* If the device has not been properly setup, the following will catch
* the problem and should stop the system from crashing.
* 20030610 - hamish@zot.org
*/
if (pci_enable_device(pdev)) {
dev_err(&pdev->dev, "can't enable PCI device\n");
agp_put_bridge(bridge);
return -ENODEV;
}
/*
* The following fixes the case where the BIOS has "forgotten" to
* provide an address range for the GART.
* 20030610 - hamish@zot.org
* This happens before pci_enable_device() intentionally;
* calling pci_enable_device() before assigning the resource
* will result in the GART being disabled on machines with such
* BIOSs (the GART ends up with a BAR starting at 0, which
* conflicts a lot of other devices).
*/
r = &pdev->resource[0];
if (!r->start && r->end) {
@ -798,6 +792,17 @@ static int __devinit agp_intel_probe(struct pci_dev *pdev,
}
}
/*
* If the device has not been properly setup, the following will catch
* the problem and should stop the system from crashing.
* 20030610 - hamish@zot.org
*/
if (pci_enable_device(pdev)) {
dev_err(&pdev->dev, "can't enable PCI device\n");
agp_put_bridge(bridge);
return -ENODEV;
}
/* Fill in the mode register */
if (cap_ptr) {
pci_read_config_dword(pdev,