ASoC: Intel: byt-rt5640: Enable DMIC interface for default DAPM route

It turned out DMIC interface wasn't enabled/disabled runtime for active
DMIC route in the rt5640 codec driver anymore after commit
71d97a7943 ("ASoC: rt5640: Use the platform data for DMIC settings").

Since DMIC interface must be enabled explicitly either by passing platform
data to rt5640 codec driver or by calling new rt5640_dmic_enable() this
patch adds a DMI quirk flag that is used to conditionally enable DMIC
interface during sound card init time.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Jarkko Nikula 2014-10-01 15:08:15 +03:00 committed by Mark Brown
parent 1400760c46
commit a5f0ab05b6

View File

@ -59,7 +59,11 @@ enum {
BYT_RT5640_IN1_MAP,
};
static unsigned long byt_rt5640_custom_map = BYT_RT5640_DMIC1_MAP;
#define BYT_RT5640_MAP(quirk) ((quirk) & 0xff)
#define BYT_RT5640_DMIC_EN BIT(16)
static unsigned long byt_rt5640_quirk = BYT_RT5640_DMIC1_MAP |
BYT_RT5640_DMIC_EN;
static const struct snd_kcontrol_new byt_rt5640_controls[] = {
SOC_DAPM_PIN_SWITCH("Headphone"),
@ -94,7 +98,7 @@ static int byt_rt5640_hw_params(struct snd_pcm_substream *substream,
static int byt_rt5640_quirk_cb(const struct dmi_system_id *id)
{
byt_rt5640_custom_map = (unsigned long)id->driver_data;
byt_rt5640_quirk = (unsigned long)id->driver_data;
return 1;
}
@ -129,7 +133,7 @@ static int byt_rt5640_init(struct snd_soc_pcm_runtime *runtime)
}
dmi_check_system(byt_rt5640_quirk_table);
switch (byt_rt5640_custom_map) {
switch (BYT_RT5640_MAP(byt_rt5640_quirk)) {
case BYT_RT5640_IN1_MAP:
custom_map = byt_rt5640_intmic_in1_map;
num_routes = ARRAY_SIZE(byt_rt5640_intmic_in1_map);
@ -143,6 +147,12 @@ static int byt_rt5640_init(struct snd_soc_pcm_runtime *runtime)
if (ret)
return ret;
if (byt_rt5640_quirk & BYT_RT5640_DMIC_EN) {
ret = rt5640_dmic_enable(codec, 0, 0);
if (ret)
return ret;
}
snd_soc_dapm_ignore_suspend(dapm, "HPOL");
snd_soc_dapm_ignore_suspend(dapm, "HPOR");