forked from Minki/linux
MIPS: PMC MSP71XX gpio drivers
This new gpio driver for PMC-Sierra's MSP71xx SoC allows standard api calls for access to the general and extended gpio's. Signed-off-by: Patrick Glass <patrickglass@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> create mode 100755 arch/mips/pmc-sierra/msp71xx/gpio.c create mode 100755 arch/mips/pmc-sierra/msp71xx/gpio_extended.c create mode 100755 include/asm-mips/pmc-sierra/msp71xx/gpio.h
This commit is contained in:
Patrick Glass
Ralf Baechle
parent
5d9a76cd0e
commit
9fa32c6b02
@ -3,6 +3,7 @@
|
||||
#
|
||||
obj-y += msp_prom.o msp_setup.o msp_irq.o \
|
||||
msp_time.o msp_serial.o msp_elb.o
|
||||
obj-$(CONFIG_HAVE_GPIO_LIB) += gpio.o gpio_extended.o
|
||||
obj-$(CONFIG_PMC_MSP7120_GW) += msp_hwbutton.o
|
||||
obj-$(CONFIG_IRQ_MSP_SLP) += msp_irq_slp.o
|
||||
obj-$(CONFIG_IRQ_MSP_CIC) += msp_irq_cic.o
|
||||
|
||||
218
arch/mips/pmc-sierra/msp71xx/gpio.c
Normal file
218
arch/mips/pmc-sierra/msp71xx/gpio.c
Normal file
@ -0,0 +1,218 @@
|
||||
/*
|
||||
* @file /arch/mips/pmc-sierra/msp71xx/gpio.c
|
||||
*
|
||||
* Generic PMC MSP71xx GPIO handling. These base gpio are controlled by two
|
||||
* types of registers. The data register sets the output level when in output
|
||||
* mode and when in input mode will contain the value at the input. The config
|
||||
* register sets the various modes for each gpio.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
* @author Patrick Glass <patrickglass@gmail.com>
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/spinlock.h>
|
||||
#include <linux/io.h>
|
||||
|
||||
#define MSP71XX_CFG_OFFSET(gpio) (4 * (gpio))
|
||||
#define CONF_MASK 0x0F
|
||||
#define MSP71XX_GPIO_INPUT 0x01
|
||||
#define MSP71XX_GPIO_OUTPUT 0x08
|
||||
|
||||
#define MSP71XX_GPIO_BASE 0x0B8400000L
|
||||
|
||||
#define to_msp71xx_gpio_chip(c) container_of(c, struct msp71xx_gpio_chip, chip)
|
||||
|
||||
static spinlock_t gpio_lock;
|
||||
|
||||
/*
|
||||
* struct msp71xx_gpio_chip - container for gpio chip and registers
|
||||
* @chip: chip structure for the specified gpio bank
|
||||
* @data_reg: register for reading and writing the gpio pin value
|
||||
* @config_reg: register to set the mode for the gpio pin bank
|
||||
* @out_drive_reg: register to set the output drive mode for the gpio pin bank
|
||||
*/
|
||||
struct msp71xx_gpio_chip {
|
||||
struct gpio_chip chip;
|
||||
void __iomem *data_reg;
|
||||
void __iomem *config_reg;
|
||||
void __iomem *out_drive_reg;
|
||||
};
|
||||
|
||||
/*
|
||||
* msp71xx_gpio_get() - return the chip's gpio value
|
||||
* @chip: chip structure which controls the specified gpio
|
||||
* @offset: gpio whose value will be returned
|
||||
*
|
||||
* It will return 0 if gpio value is low and other if high.
|
||||
*/
|
||||
static int msp71xx_gpio_get(struct gpio_chip *chip, unsigned offset)
|
||||
{
|
||||
struct msp71xx_gpio_chip *msp_chip = to_msp71xx_gpio_chip(chip);
|
||||
|
||||
return __raw_readl(msp_chip->data_reg) & (1 << offset);
|
||||
}
|
||||
|
||||
/*
|
||||
* msp71xx_gpio_set() - set the output value for the gpio
|
||||
* @chip: chip structure who controls the specified gpio
|
||||
* @offset: gpio whose value will be assigned
|
||||
* @value: logic level to assign to the gpio initially
|
||||
*
|
||||
* This will set the gpio bit specified to the desired value. It will set the
|
||||
* gpio pin low if value is 0 otherwise it will be high.
|
||||
*/
|
||||
static void msp71xx_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
|
||||
{
|
||||
struct msp71xx_gpio_chip *msp_chip = to_msp71xx_gpio_chip(chip);
|
||||
unsigned long flags;
|
||||
u32 data;
|
||||
|
||||
spin_lock_irqsave(&gpio_lock, flags);
|
||||
|
||||
data = __raw_readl(msp_chip->data_reg);
|
||||
if (value)
|
||||
data |= (1 << offset);
|
||||
else
|
||||
data &= ~(1 << offset);
|
||||
__raw_writel(data, msp_chip->data_reg);
|
||||
|
||||
spin_unlock_irqrestore(&gpio_lock, flags);
|
||||
}
|
||||
|
||||
/*
|
||||
* msp71xx_set_gpio_mode() - declare the mode for a gpio
|
||||
* @chip: chip structure which controls the specified gpio
|
||||
* @offset: gpio whose value will be assigned
|
||||
* @mode: desired configuration for the gpio (see datasheet)
|
||||
*
|
||||
* It will set the gpio pin config to the @mode value passed in.
|
||||
*/
|
||||
static int msp71xx_set_gpio_mode(struct gpio_chip *chip,
|
||||
unsigned offset, int mode)
|
||||
{
|
||||
struct msp71xx_gpio_chip *msp_chip = to_msp71xx_gpio_chip(chip);
|
||||
const unsigned bit_offset = MSP71XX_CFG_OFFSET(offset);
|
||||
unsigned long flags;
|
||||
u32 cfg;
|
||||
|
||||
spin_lock_irqsave(&gpio_lock, flags);
|
||||
|
||||
cfg = __raw_readl(msp_chip->config_reg);
|
||||
cfg &= ~(CONF_MASK << bit_offset);
|
||||
cfg |= (mode << bit_offset);
|
||||
__raw_writel(cfg, msp_chip->config_reg);
|
||||
|
||||
spin_unlock_irqrestore(&gpio_lock, flags);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
* msp71xx_direction_output() - declare the direction mode for a gpio
|
||||
* @chip: chip structure which controls the specified gpio
|
||||
* @offset: gpio whose value will be assigned
|
||||
* @value: logic level to assign to the gpio initially
|
||||
*
|
||||
* This call will set the mode for the @gpio to output. It will set the
|
||||
* gpio pin low if value is 0 otherwise it will be high.
|
||||
*/
|
||||
static int msp71xx_direction_output(struct gpio_chip *chip,
|
||||
unsigned offset, int value)
|
||||
{
|
||||
msp71xx_gpio_set(chip, offset, value);
|
||||
|
||||
return msp71xx_set_gpio_mode(chip, offset, MSP71XX_GPIO_OUTPUT);
|
||||
}
|
||||
|
||||
/*
|
||||
* msp71xx_direction_input() - declare the direction mode for a gpio
|
||||
* @chip: chip structure which controls the specified gpio
|
||||
* @offset: gpio whose to which the value will be assigned
|
||||
*
|
||||
* This call will set the mode for the @gpio to input.
|
||||
*/
|
||||
static int msp71xx_direction_input(struct gpio_chip *chip, unsigned offset)
|
||||
{
|
||||
return msp71xx_set_gpio_mode(chip, offset, MSP71XX_GPIO_INPUT);
|
||||
}
|
||||
|
||||
/*
|
||||
* msp71xx_set_output_drive() - declare the output drive for the gpio line
|
||||
* @gpio: gpio pin whose output drive you wish to modify
|
||||
* @value: zero for active drain 1 for open drain drive
|
||||
*
|
||||
* This call will set the output drive mode for the @gpio to output.
|
||||
*/
|
||||
int msp71xx_set_output_drive(unsigned gpio, int value)
|
||||
{
|
||||
unsigned long flags;
|
||||
u32 data;
|
||||
|
||||
if (gpio > 15 || gpio < 0)
|
||||
return -EINVAL;
|
||||
|
||||
spin_lock_irqsave(&gpio_lock, flags);
|
||||
|
||||
data = __raw_readl((void __iomem *)(MSP71XX_GPIO_BASE + 0x190));
|
||||
if (value)
|
||||
data |= (1 << gpio);
|
||||
else
|
||||
data &= ~(1 << gpio);
|
||||
__raw_writel(data, (void __iomem *)(MSP71XX_GPIO_BASE + 0x190));
|
||||
|
||||
spin_unlock_irqrestore(&gpio_lock, flags);
|
||||
|
||||
return 0;
|
||||
}
|
||||
EXPORT_SYMBOL(msp71xx_set_output_drive);
|
||||
|
||||
#define MSP71XX_GPIO_BANK(name, dr, cr, base_gpio, num_gpio) \
|
||||
{ \
|
||||
.chip = { \
|
||||
.label = name, \
|
||||
.direction_input = msp71xx_direction_input, \
|
||||
.direction_output = msp71xx_direction_output, \
|
||||
.get = msp71xx_gpio_get, \
|
||||
.set = msp71xx_gpio_set, \
|
||||
.base = base_gpio, \
|
||||
.ngpio = num_gpio \
|
||||
}, \
|
||||
.data_reg = (void __iomem *)(MSP71XX_GPIO_BASE + dr), \
|
||||
.config_reg = (void __iomem *)(MSP71XX_GPIO_BASE + cr), \
|
||||
.out_drive_reg = (void __iomem *)(MSP71XX_GPIO_BASE + 0x190), \
|
||||
}
|
||||
|
||||
/*
|
||||
* struct msp71xx_gpio_banks[] - container array of gpio banks
|
||||
* @chip: chip structure for the specified gpio bank
|
||||
* @data_reg: register for reading and writing the gpio pin value
|
||||
* @config_reg: register to set the mode for the gpio pin bank
|
||||
*
|
||||
* This array structure defines the gpio banks for the PMC MIPS Processor.
|
||||
* We specify the bank name, the data register, the config register, base
|
||||
* starting gpio number, and the number of gpios exposed by the bank.
|
||||
*/
|
||||
static struct msp71xx_gpio_chip msp71xx_gpio_banks[] = {
|
||||
|
||||
MSP71XX_GPIO_BANK("GPIO_1_0", 0x170, 0x180, 0, 2),
|
||||
MSP71XX_GPIO_BANK("GPIO_5_2", 0x174, 0x184, 2, 4),
|
||||
MSP71XX_GPIO_BANK("GPIO_9_6", 0x178, 0x188, 6, 4),
|
||||
MSP71XX_GPIO_BANK("GPIO_15_10", 0x17C, 0x18C, 10, 6),
|
||||
};
|
||||
|
||||
void __init msp71xx_init_gpio(void)
|
||||
{
|
||||
int i;
|
||||
|
||||
spin_lock_init(&gpio_lock);
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(msp71xx_gpio_banks); i++)
|
||||
gpiochip_add(&msp71xx_gpio_banks[i].chip);
|
||||
}
|
||||
148
arch/mips/pmc-sierra/msp71xx/gpio_extended.c
Normal file
148
arch/mips/pmc-sierra/msp71xx/gpio_extended.c
Normal file
@ -0,0 +1,148 @@
|
||||
/*
|
||||
* @file /arch/mips/pmc-sierra/msp71xx/gpio_extended.c
|
||||
*
|
||||
* Generic PMC MSP71xx EXTENDED (EXD) GPIO handling. The extended gpio is
|
||||
* a set of hardware registers that have no need for explicit locking as
|
||||
* it is handled by unique method of writing individual set/clr bits.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
* @author Patrick Glass <patrickglass@gmail.com>
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/io.h>
|
||||
|
||||
#define MSP71XX_DATA_OFFSET(gpio) (2 * (gpio))
|
||||
#define MSP71XX_READ_OFFSET(gpio) (MSP71XX_DATA_OFFSET(gpio) + 1)
|
||||
#define MSP71XX_CFG_OUT_OFFSET(gpio) (MSP71XX_DATA_OFFSET(gpio) + 16)
|
||||
#define MSP71XX_CFG_IN_OFFSET(gpio) (MSP71XX_CFG_OUT_OFFSET(gpio) + 1)
|
||||
|
||||
#define MSP71XX_EXD_GPIO_BASE 0x0BC000000L
|
||||
|
||||
#define to_msp71xx_exd_gpio_chip(c) \
|
||||
container_of(c, struct msp71xx_exd_gpio_chip, chip)
|
||||
|
||||
/*
|
||||
* struct msp71xx_exd_gpio_chip - container for gpio chip and registers
|
||||
* @chip: chip structure for the specified gpio bank
|
||||
* @reg: register for control and data of gpio pin
|
||||
*/
|
||||
struct msp71xx_exd_gpio_chip {
|
||||
struct gpio_chip chip;
|
||||
void __iomem *reg;
|
||||
};
|
||||
|
||||
/*
|
||||
* msp71xx_exd_gpio_get() - return the chip's gpio value
|
||||
* @chip: chip structure which controls the specified gpio
|
||||
* @offset: gpio whose value will be returned
|
||||
*
|
||||
* It will return 0 if gpio value is low and other if high.
|
||||
*/
|
||||
static int msp71xx_exd_gpio_get(struct gpio_chip *chip, unsigned offset)
|
||||
{
|
||||
struct msp71xx_exd_gpio_chip *msp71xx_chip =
|
||||
to_msp71xx_exd_gpio_chip(chip);
|
||||
const unsigned bit = MSP71XX_READ_OFFSET(offset);
|
||||
|
||||
return __raw_readl(msp71xx_chip->reg) & (1 << bit);
|
||||
}
|
||||
|
||||
/*
|
||||
* msp71xx_exd_gpio_set() - set the output value for the gpio
|
||||
* @chip: chip structure who controls the specified gpio
|
||||
* @offset: gpio whose value will be assigned
|
||||
* @value: logic level to assign to the gpio initially
|
||||
*
|
||||
* This will set the gpio bit specified to the desired value. It will set the
|
||||
* gpio pin low if value is 0 otherwise it will be high.
|
||||
*/
|
||||
static void msp71xx_exd_gpio_set(struct gpio_chip *chip,
|
||||
unsigned offset, int value)
|
||||
{
|
||||
struct msp71xx_exd_gpio_chip *msp71xx_chip =
|
||||
to_msp71xx_exd_gpio_chip(chip);
|
||||
const unsigned bit = MSP71XX_DATA_OFFSET(offset);
|
||||
|
||||
__raw_writel(1 << (bit + (value ? 1 : 0)), msp71xx_chip->reg);
|
||||
}
|
||||
|
||||
/*
|
||||
* msp71xx_exd_direction_output() - declare the direction mode for a gpio
|
||||
* @chip: chip structure which controls the specified gpio
|
||||
* @offset: gpio whose value will be assigned
|
||||
* @value: logic level to assign to the gpio initially
|
||||
*
|
||||
* This call will set the mode for the @gpio to output. It will set the
|
||||
* gpio pin low if value is 0 otherwise it will be high.
|
||||
*/
|
||||
static int msp71xx_exd_direction_output(struct gpio_chip *chip,
|
||||
unsigned offset, int value)
|
||||
{
|
||||
struct msp71xx_exd_gpio_chip *msp71xx_chip =
|
||||
to_msp71xx_exd_gpio_chip(chip);
|
||||
|
||||
msp71xx_exd_gpio_set(chip, offset, value);
|
||||
__raw_writel(1 << MSP71XX_CFG_OUT_OFFSET(offset), msp71xx_chip->reg);
|
||||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
* msp71xx_exd_direction_input() - declare the direction mode for a gpio
|
||||
* @chip: chip structure which controls the specified gpio
|
||||
* @offset: gpio whose to which the value will be assigned
|
||||
*
|
||||
* This call will set the mode for the @gpio to input.
|
||||
*/
|
||||
static int msp71xx_exd_direction_input(struct gpio_chip *chip, unsigned offset)
|
||||
{
|
||||
struct msp71xx_exd_gpio_chip *msp71xx_chip =
|
||||
to_msp71xx_exd_gpio_chip(chip);
|
||||
|
||||
__raw_writel(1 << MSP71XX_CFG_IN_OFFSET(offset), msp71xx_chip->reg);
|
||||
return 0;
|
||||
}
|
||||
|
||||
#define MSP71XX_EXD_GPIO_BANK(name, exd_reg, base_gpio, num_gpio) \
|
||||
{ \
|
||||
.chip = { \
|
||||
.label = name, \
|
||||
.direction_input = msp71xx_exd_direction_input, \
|
||||
.direction_output = msp71xx_exd_direction_output, \
|
||||
.get = msp71xx_exd_gpio_get, \
|
||||
.set = msp71xx_exd_gpio_set, \
|
||||
.base = base_gpio, \
|
||||
.ngpio = num_gpio, \
|
||||
}, \
|
||||
.reg = (void __iomem *)(MSP71XX_EXD_GPIO_BASE + exd_reg), \
|
||||
}
|
||||
|
||||
/*
|
||||
* struct msp71xx_exd_gpio_banks[] - container array of gpio banks
|
||||
* @chip: chip structure for the specified gpio bank
|
||||
* @reg: register for reading and writing the gpio pin value
|
||||
*
|
||||
* This array structure defines the extended gpio banks for the
|
||||
* PMC MIPS Processor. We specify the bank name, the data/config
|
||||
* register,the base starting gpio number, and the number of
|
||||
* gpios exposed by the bank of gpios.
|
||||
*/
|
||||
static struct msp71xx_exd_gpio_chip msp71xx_exd_gpio_banks[] = {
|
||||
|
||||
MSP71XX_EXD_GPIO_BANK("GPIO_23_16", 0x188, 16, 8),
|
||||
MSP71XX_EXD_GPIO_BANK("GPIO_27_24", 0x18C, 24, 4),
|
||||
};
|
||||
|
||||
void __init msp71xx_init_gpio_extended(void)
|
||||
{
|
||||
int i;
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(msp71xx_exd_gpio_banks); i++)
|
||||
gpiochip_add(&msp71xx_exd_gpio_banks[i].chip);
|
||||
}
|
||||
46
include/asm-mips/pmc-sierra/msp71xx/gpio.h
Normal file
46
include/asm-mips/pmc-sierra/msp71xx/gpio.h
Normal file
@ -0,0 +1,46 @@
|
||||
/*
|
||||
* include/asm-mips/pmc-sierra/msp71xx/gpio.h
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
* @author Patrick Glass <patrickglass@gmail.com>
|
||||
*/
|
||||
|
||||
#ifndef __PMC_MSP71XX_GPIO_H
|
||||
#define __PMC_MSP71XX_GPIO_H
|
||||
|
||||
/* Max number of gpio's is 28 on chip plus 3 banks of I2C IO Expanders */
|
||||
#define ARCH_NR_GPIOS (28 + (3 * 8))
|
||||
|
||||
/* new generic GPIO API - see Documentation/gpio.txt */
|
||||
#include <asm-generic/gpio.h>
|
||||
|
||||
#define gpio_get_value __gpio_get_value
|
||||
#define gpio_set_value __gpio_set_value
|
||||
#define gpio_cansleep __gpio_cansleep
|
||||
|
||||
/* Setup calls for the gpio and gpio extended */
|
||||
extern void msp71xx_init_gpio(void);
|
||||
extern void msp71xx_init_gpio_extended(void);
|
||||
extern int msp71xx_set_output_drive(unsigned gpio, int value);
|
||||
|
||||
/* Custom output drive functionss */
|
||||
static inline int gpio_set_output_drive(unsigned gpio, int value)
|
||||
{
|
||||
return msp71xx_set_output_drive(gpio, value);
|
||||
}
|
||||
|
||||
/* IRQ's are not supported for gpio lines */
|
||||
static inline int gpio_to_irq(unsigned gpio)
|
||||
{
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
static inline int irq_to_gpio(unsigned irq)
|
||||
{
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
#endif /* __PMC_MSP71XX_GPIO_H */
|
||||
Loading…
Reference in New Issue
Block a user