leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity

mmc: Add support for disabling write-protect detection

Browse Source 
It is not uncommon to see systems where there is no physical write-protect
signal (e.g. when using eMMC or microSD card slots). For some controllers,
which have a dedicated write-protection detection logic (like SDHCI
controllers), the get_ro() callback can return bogus data in such a case.

Instead of handling this on a per controller basis this patch adds a new
capability flag to the MMC core that can be set to specify that the result
of get_ro() is invalid. When the flag is set the core will not call
get_ro() and assume that the card is always read-write.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This commit is contained in:
Lars-Peter Clausen 2015-05-06 20:31:19 +02:00 committed by Ulf Hansson
parent 0250fdf257
commit 9f6e0bff2a
2 changed files with 24 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

30
drivers/mmc/core/sd.c
View File

@ -804,6 +804,28 @@ int mmc_sd_get_csd(struct mmc_host *host, struct mmc_card *card)
return 0;
}
static int mmc_sd_get_ro(struct mmc_host *host)
{
int ro;
/*
* Some systems don't feature a write-protect pin and don't need one.
* E.g. because they only have micro-SD card slot. For those systems
* assume that the SD card is always read-write.
*/
if (host->caps2 & MMC_CAP2_NO_WRITE_PROTECT)
return 0;
if (!host->ops->get_ro)
return -1;
mmc_host_clk_hold(host);
ro = host->ops->get_ro(host);
mmc_host_clk_release(host);
return ro;
}
int mmc_sd_setup_card(struct mmc_host *host, struct mmc_card *card,
bool reinit)
{
@ -855,13 +877,7 @@ int mmc_sd_setup_card(struct mmc_host *host, struct mmc_card *card,
* Check if read-only switch is active.
*/
if (!reinit) {
int ro = -1;
if (host->ops->get_ro) {
mmc_host_clk_hold(card->host);
ro = host->ops->get_ro(host);
mmc_host_clk_release(card->host);
}
int ro = mmc_sd_get_ro(host);
if (ro < 0) {
pr_warn("%s: host does not support reading read-only switch, assuming write-enable\n",

1
include/linux/mmc/host.h
View File

@ -286,6 +286,7 @@ struct mmc_host {
MMC_CAP2_HS400_1_2V)
#define MMC_CAP2_HSX00_1_2V (MMC_CAP2_HS200_1_2V_SDR | MMC_CAP2_HS400_1_2V)
#define MMC_CAP2_SDIO_IRQ_NOTHREAD (1 << 17)
#define MMC_CAP2_NO_WRITE_PROTECT (1 << 18) /* No physical write protect pin, assume that card is always read-write */
mmc_pm_flag_t pm_caps; /* supported pm features */