leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Revert "ath9k_hw: Fix incorrect spur_freq_sd for AR9003"

Browse Source 
This reverts commit a844adfd7b.
The commit a844adfd is degrading rx sensitivity of lower rate in
HT40 mode and it is confirmed that reverting the change is
improving rx sensitivity.

spur_freq_sd (for self-corr in AGC) is defined with respect to the
center of each 20MHz channel while spur_phase_delta (for self-corr
in Rx and spur data filter) is defined with respect to the center
of current RF channel.

So in short, we need to subtract spur_freq_sd (for self-corr in AGC)
by the offset between the center of primary20 and the center of RF
channel in SW. This offset could be +/10 MHz for dynamic 40.

Cc: Madhan Jaganathan <madhanj@qca.qualcomm.com>
Signed-off-by: Kai Shi <kaishi@qca.qualcomm.com>
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
This commit is contained in:
Rajkumar Manoharan 2012-05-01 09:12:24 +05:30 committed by John W. Linville
parent cf04317227
commit 9d1ceac5c6
1 changed files with 2 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
drivers/net/wireless/ath/ath9k/ar9003_phy.c
View File

@ -373,7 +373,7 @@ static void ar9003_hw_spur_ofdm_work(struct ath_hw *ah,
else
spur_subchannel_sd = 0;
spur_freq_sd = (freq_offset << 9) / 11;
spur_freq_sd = ((freq_offset + 10) << 9) / 11;
} else {
if (REG_READ_FIELD(ah, AR_PHY_GEN_CTRL,
@ -382,7 +382,7 @@ static void ar9003_hw_spur_ofdm_work(struct ath_hw *ah,
else
spur_subchannel_sd = 1;
spur_freq_sd = (freq_offset << 9) / 11;
spur_freq_sd = ((freq_offset - 10) << 9) / 11;
}