forked from Minki/linux
iio: jsa1212: Add JSA1212 proximity/ALS sensor
This patch adds a new driver for solteam opto JSA1212 proximity and ambient light sensor. Basic details of the chip can be found here. http://www.solteamopto.com.tw/detail.php?ms=3&po_unit=2&pt_unit=29&p_unit=120 Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This commit is contained in:
parent
5e62863aea
commit
995863cc8e
@ -109,6 +109,16 @@ config HID_SENSOR_PROX
|
||||
To compile this driver as a module, choose M here: the
|
||||
module will be called hid-sensor-prox.
|
||||
|
||||
config JSA1212
|
||||
tristate "JSA1212 ALS and proximity sensor driver"
|
||||
depends on I2C
|
||||
help
|
||||
Say Y here if you want to build a IIO driver for JSA1212
|
||||
proximity & ALS sensor device.
|
||||
|
||||
To compile this driver as a module, choose M here:
|
||||
the module will be called jsa1212.
|
||||
|
||||
config SENSORS_LM3533
|
||||
tristate "LM3533 ambient light sensor"
|
||||
depends on MFD_LM3533
|
||||
|
@ -12,6 +12,7 @@ obj-$(CONFIG_GP2AP020A00F) += gp2ap020a00f.o
|
||||
obj-$(CONFIG_HID_SENSOR_ALS) += hid-sensor-als.o
|
||||
obj-$(CONFIG_HID_SENSOR_PROX) += hid-sensor-prox.o
|
||||
obj-$(CONFIG_ISL29125) += isl29125.o
|
||||
obj-$(CONFIG_JSA1212) += jsa1212.o
|
||||
obj-$(CONFIG_SENSORS_LM3533) += lm3533-als.o
|
||||
obj-$(CONFIG_LTR501) += ltr501.o
|
||||
obj-$(CONFIG_SENSORS_TSL2563) += tsl2563.o
|
||||
|
471
drivers/iio/light/jsa1212.c
Normal file
471
drivers/iio/light/jsa1212.c
Normal file
@ -0,0 +1,471 @@
|
||||
/*
|
||||
* JSA1212 Ambient Light & Proximity Sensor Driver
|
||||
*
|
||||
* Copyright (c) 2014, Intel Corporation.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms and conditions of the GNU General Public License,
|
||||
* version 2, as published by the Free Software Foundation.
|
||||
*
|
||||
* This program is distributed in the hope it will be useful, but WITHOUT
|
||||
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
||||
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
||||
* more details.
|
||||
*
|
||||
* JSA1212 I2C slave address: 0x44(ADDR tied to GND), 0x45(ADDR tied to VDD)
|
||||
*
|
||||
* TODO: Interrupt support, thresholds, range support.
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/mutex.h>
|
||||
#include <linux/acpi.h>
|
||||
#include <linux/regmap.h>
|
||||
#include <linux/iio/iio.h>
|
||||
#include <linux/iio/sysfs.h>
|
||||
|
||||
/* JSA1212 reg address */
|
||||
#define JSA1212_CONF_REG 0x01
|
||||
#define JSA1212_INT_REG 0x02
|
||||
#define JSA1212_PXS_LT_REG 0x03
|
||||
#define JSA1212_PXS_HT_REG 0x04
|
||||
#define JSA1212_ALS_TH1_REG 0x05
|
||||
#define JSA1212_ALS_TH2_REG 0x06
|
||||
#define JSA1212_ALS_TH3_REG 0x07
|
||||
#define JSA1212_PXS_DATA_REG 0x08
|
||||
#define JSA1212_ALS_DT1_REG 0x09
|
||||
#define JSA1212_ALS_DT2_REG 0x0A
|
||||
#define JSA1212_ALS_RNG_REG 0x0B
|
||||
#define JSA1212_MAX_REG 0x0C
|
||||
|
||||
/* JSA1212 reg masks */
|
||||
#define JSA1212_CONF_MASK 0xFF
|
||||
#define JSA1212_INT_MASK 0xFF
|
||||
#define JSA1212_PXS_LT_MASK 0xFF
|
||||
#define JSA1212_PXS_HT_MASK 0xFF
|
||||
#define JSA1212_ALS_TH1_MASK 0xFF
|
||||
#define JSA1212_ALS_TH2_LT_MASK 0x0F
|
||||
#define JSA1212_ALS_TH2_HT_MASK 0xF0
|
||||
#define JSA1212_ALS_TH3_MASK 0xFF
|
||||
#define JSA1212_PXS_DATA_MASK 0xFF
|
||||
#define JSA1212_ALS_DATA_MASK 0x0FFF
|
||||
#define JSA1212_ALS_DT1_MASK 0xFF
|
||||
#define JSA1212_ALS_DT2_MASK 0x0F
|
||||
#define JSA1212_ALS_RNG_MASK 0x07
|
||||
|
||||
/* JSA1212 CONF REG bits */
|
||||
#define JSA1212_CONF_PXS_MASK 0x80
|
||||
#define JSA1212_CONF_PXS_ENABLE 0x80
|
||||
#define JSA1212_CONF_PXS_DISABLE 0x00
|
||||
#define JSA1212_CONF_ALS_MASK 0x04
|
||||
#define JSA1212_CONF_ALS_ENABLE 0x04
|
||||
#define JSA1212_CONF_ALS_DISABLE 0x00
|
||||
#define JSA1212_CONF_IRDR_MASK 0x08
|
||||
/* Proxmity sensing IRDR current sink settings */
|
||||
#define JSA1212_CONF_IRDR_200MA 0x08
|
||||
#define JSA1212_CONF_IRDR_100MA 0x00
|
||||
#define JSA1212_CONF_PXS_SLP_MASK 0x70
|
||||
#define JSA1212_CONF_PXS_SLP_0MS 0x70
|
||||
#define JSA1212_CONF_PXS_SLP_12MS 0x60
|
||||
#define JSA1212_CONF_PXS_SLP_50MS 0x50
|
||||
#define JSA1212_CONF_PXS_SLP_75MS 0x40
|
||||
#define JSA1212_CONF_PXS_SLP_100MS 0x30
|
||||
#define JSA1212_CONF_PXS_SLP_200MS 0x20
|
||||
#define JSA1212_CONF_PXS_SLP_400MS 0x10
|
||||
#define JSA1212_CONF_PXS_SLP_800MS 0x00
|
||||
|
||||
/* JSA1212 INT REG bits */
|
||||
#define JSA1212_INT_CTRL_MASK 0x01
|
||||
#define JSA1212_INT_CTRL_EITHER 0x00
|
||||
#define JSA1212_INT_CTRL_BOTH 0x01
|
||||
#define JSA1212_INT_ALS_PRST_MASK 0x06
|
||||
#define JSA1212_INT_ALS_PRST_1CONV 0x00
|
||||
#define JSA1212_INT_ALS_PRST_4CONV 0x02
|
||||
#define JSA1212_INT_ALS_PRST_8CONV 0x04
|
||||
#define JSA1212_INT_ALS_PRST_16CONV 0x06
|
||||
#define JSA1212_INT_ALS_FLAG_MASK 0x08
|
||||
#define JSA1212_INT_ALS_FLAG_CLR 0x00
|
||||
#define JSA1212_INT_PXS_PRST_MASK 0x60
|
||||
#define JSA1212_INT_PXS_PRST_1CONV 0x00
|
||||
#define JSA1212_INT_PXS_PRST_4CONV 0x20
|
||||
#define JSA1212_INT_PXS_PRST_8CONV 0x40
|
||||
#define JSA1212_INT_PXS_PRST_16CONV 0x60
|
||||
#define JSA1212_INT_PXS_FLAG_MASK 0x80
|
||||
#define JSA1212_INT_PXS_FLAG_CLR 0x00
|
||||
|
||||
/* JSA1212 ALS RNG REG bits */
|
||||
#define JSA1212_ALS_RNG_0_2048 0x00
|
||||
#define JSA1212_ALS_RNG_0_1024 0x01
|
||||
#define JSA1212_ALS_RNG_0_512 0x02
|
||||
#define JSA1212_ALS_RNG_0_256 0x03
|
||||
#define JSA1212_ALS_RNG_0_128 0x04
|
||||
|
||||
/* JSA1212 INT threshold range */
|
||||
#define JSA1212_ALS_TH_MIN 0x0000
|
||||
#define JSA1212_ALS_TH_MAX 0x0FFF
|
||||
#define JSA1212_PXS_TH_MIN 0x00
|
||||
#define JSA1212_PXS_TH_MAX 0xFF
|
||||
|
||||
#define JSA1212_ALS_DELAY_MS 200
|
||||
#define JSA1212_PXS_DELAY_MS 100
|
||||
|
||||
#define JSA1212_DRIVER_NAME "jsa1212"
|
||||
#define JSA1212_REGMAP_NAME "jsa1212_regmap"
|
||||
|
||||
enum jsa1212_op_mode {
|
||||
JSA1212_OPMODE_ALS_EN,
|
||||
JSA1212_OPMODE_PXS_EN,
|
||||
};
|
||||
|
||||
struct jsa1212_data {
|
||||
struct i2c_client *client;
|
||||
struct mutex lock;
|
||||
u8 als_rng_idx;
|
||||
bool als_en; /* ALS enable status */
|
||||
bool pxs_en; /* proximity enable status */
|
||||
struct regmap *regmap;
|
||||
};
|
||||
|
||||
/* ALS range idx to val mapping */
|
||||
static const int jsa1212_als_range_val[] = {2048, 1024, 512, 256, 128,
|
||||
128, 128, 128};
|
||||
|
||||
/* Enables or disables ALS function based on status */
|
||||
static int jsa1212_als_enable(struct jsa1212_data *data, u8 status)
|
||||
{
|
||||
int ret;
|
||||
|
||||
ret = regmap_update_bits(data->regmap, JSA1212_CONF_REG,
|
||||
JSA1212_CONF_ALS_MASK,
|
||||
status);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
data->als_en = !!status;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* Enables or disables PXS function based on status */
|
||||
static int jsa1212_pxs_enable(struct jsa1212_data *data, u8 status)
|
||||
{
|
||||
int ret;
|
||||
|
||||
ret = regmap_update_bits(data->regmap, JSA1212_CONF_REG,
|
||||
JSA1212_CONF_PXS_MASK,
|
||||
status);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
data->pxs_en = !!status;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int jsa1212_read_als_data(struct jsa1212_data *data,
|
||||
unsigned int *val)
|
||||
{
|
||||
int ret;
|
||||
__le16 als_data;
|
||||
|
||||
ret = jsa1212_als_enable(data, JSA1212_CONF_ALS_ENABLE);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
/* Delay for data output */
|
||||
msleep(JSA1212_ALS_DELAY_MS);
|
||||
|
||||
/* Read 12 bit data */
|
||||
ret = regmap_bulk_read(data->regmap, JSA1212_ALS_DT1_REG, &als_data, 2);
|
||||
if (ret < 0) {
|
||||
dev_err(&data->client->dev, "als data read err\n");
|
||||
goto als_data_read_err;
|
||||
}
|
||||
|
||||
*val = le16_to_cpu(als_data);
|
||||
|
||||
als_data_read_err:
|
||||
return jsa1212_als_enable(data, JSA1212_CONF_ALS_DISABLE);
|
||||
}
|
||||
|
||||
static int jsa1212_read_pxs_data(struct jsa1212_data *data,
|
||||
unsigned int *val)
|
||||
{
|
||||
int ret;
|
||||
unsigned int pxs_data;
|
||||
|
||||
ret = jsa1212_pxs_enable(data, JSA1212_CONF_PXS_ENABLE);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
/* Delay for data output */
|
||||
msleep(JSA1212_PXS_DELAY_MS);
|
||||
|
||||
/* Read out all data */
|
||||
ret = regmap_read(data->regmap, JSA1212_PXS_DATA_REG, &pxs_data);
|
||||
if (ret < 0) {
|
||||
dev_err(&data->client->dev, "pxs data read err\n");
|
||||
goto pxs_data_read_err;
|
||||
}
|
||||
|
||||
*val = pxs_data & JSA1212_PXS_DATA_MASK;
|
||||
|
||||
pxs_data_read_err:
|
||||
return jsa1212_pxs_enable(data, JSA1212_CONF_PXS_DISABLE);
|
||||
}
|
||||
|
||||
static int jsa1212_read_raw(struct iio_dev *indio_dev,
|
||||
struct iio_chan_spec const *chan,
|
||||
int *val, int *val2, long mask)
|
||||
{
|
||||
int ret;
|
||||
struct jsa1212_data *data = iio_priv(indio_dev);
|
||||
|
||||
switch (mask) {
|
||||
case IIO_CHAN_INFO_RAW:
|
||||
mutex_lock(&data->lock);
|
||||
switch (chan->type) {
|
||||
case IIO_LIGHT:
|
||||
ret = jsa1212_read_als_data(data, val);
|
||||
break;
|
||||
case IIO_PROXIMITY:
|
||||
ret = jsa1212_read_pxs_data(data, val);
|
||||
break;
|
||||
default:
|
||||
ret = -EINVAL;
|
||||
break;
|
||||
}
|
||||
mutex_unlock(&data->lock);
|
||||
return ret < 0 ? ret : IIO_VAL_INT;
|
||||
case IIO_CHAN_INFO_SCALE:
|
||||
switch (chan->type) {
|
||||
case IIO_LIGHT:
|
||||
*val = jsa1212_als_range_val[data->als_rng_idx];
|
||||
*val2 = BIT(12); /* Max 12 bit value */
|
||||
return IIO_VAL_FRACTIONAL;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
static const struct iio_chan_spec jsa1212_channels[] = {
|
||||
{
|
||||
.type = IIO_LIGHT,
|
||||
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
|
||||
BIT(IIO_CHAN_INFO_SCALE),
|
||||
},
|
||||
{
|
||||
.type = IIO_PROXIMITY,
|
||||
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
|
||||
}
|
||||
};
|
||||
|
||||
static const struct iio_info jsa1212_info = {
|
||||
.driver_module = THIS_MODULE,
|
||||
.read_raw = &jsa1212_read_raw,
|
||||
};
|
||||
|
||||
static int jsa1212_chip_init(struct jsa1212_data *data)
|
||||
{
|
||||
int ret;
|
||||
|
||||
ret = regmap_write(data->regmap, JSA1212_CONF_REG,
|
||||
(JSA1212_CONF_PXS_SLP_50MS |
|
||||
JSA1212_CONF_IRDR_200MA));
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
ret = regmap_write(data->regmap, JSA1212_INT_REG,
|
||||
JSA1212_INT_ALS_PRST_4CONV);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
data->als_rng_idx = JSA1212_ALS_RNG_0_2048;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static bool jsa1212_is_volatile_reg(struct device *dev, unsigned int reg)
|
||||
{
|
||||
switch (reg) {
|
||||
case JSA1212_PXS_DATA_REG:
|
||||
case JSA1212_ALS_DT1_REG:
|
||||
case JSA1212_ALS_DT2_REG:
|
||||
case JSA1212_INT_REG:
|
||||
return true;
|
||||
default:
|
||||
return false;
|
||||
}
|
||||
}
|
||||
|
||||
static struct regmap_config jsa1212_regmap_config = {
|
||||
.name = JSA1212_REGMAP_NAME,
|
||||
.reg_bits = 8,
|
||||
.val_bits = 8,
|
||||
.max_register = JSA1212_MAX_REG,
|
||||
.cache_type = REGCACHE_RBTREE,
|
||||
.volatile_reg = jsa1212_is_volatile_reg,
|
||||
};
|
||||
|
||||
static int jsa1212_probe(struct i2c_client *client,
|
||||
const struct i2c_device_id *id)
|
||||
{
|
||||
struct jsa1212_data *data;
|
||||
struct iio_dev *indio_dev;
|
||||
struct regmap *regmap;
|
||||
int ret;
|
||||
|
||||
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
|
||||
return -ENODEV;
|
||||
|
||||
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
|
||||
if (!indio_dev)
|
||||
return -ENOMEM;
|
||||
|
||||
regmap = devm_regmap_init_i2c(client, &jsa1212_regmap_config);
|
||||
if (IS_ERR(regmap)) {
|
||||
dev_err(&client->dev, "Regmap initialization failed.\n");
|
||||
return PTR_ERR(regmap);
|
||||
}
|
||||
|
||||
data = iio_priv(indio_dev);
|
||||
|
||||
i2c_set_clientdata(client, indio_dev);
|
||||
data->client = client;
|
||||
data->regmap = regmap;
|
||||
|
||||
mutex_init(&data->lock);
|
||||
|
||||
ret = jsa1212_chip_init(data);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
indio_dev->dev.parent = &client->dev;
|
||||
indio_dev->channels = jsa1212_channels;
|
||||
indio_dev->num_channels = ARRAY_SIZE(jsa1212_channels);
|
||||
indio_dev->name = JSA1212_DRIVER_NAME;
|
||||
indio_dev->modes = INDIO_DIRECT_MODE;
|
||||
|
||||
indio_dev->info = &jsa1212_info;
|
||||
|
||||
ret = iio_device_register(indio_dev);
|
||||
if (ret < 0)
|
||||
dev_err(&client->dev, "%s: register device failed\n", __func__);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
/* power off the device */
|
||||
static int jsa1212_power_off(struct jsa1212_data *data)
|
||||
{
|
||||
int ret;
|
||||
|
||||
mutex_lock(&data->lock);
|
||||
|
||||
ret = regmap_update_bits(data->regmap, JSA1212_CONF_REG,
|
||||
JSA1212_CONF_ALS_MASK |
|
||||
JSA1212_CONF_PXS_MASK,
|
||||
JSA1212_CONF_ALS_DISABLE |
|
||||
JSA1212_CONF_PXS_DISABLE);
|
||||
|
||||
if (ret < 0)
|
||||
dev_err(&data->client->dev, "power off cmd failed\n");
|
||||
|
||||
mutex_unlock(&data->lock);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int jsa1212_remove(struct i2c_client *client)
|
||||
{
|
||||
struct iio_dev *indio_dev = i2c_get_clientdata(client);
|
||||
struct jsa1212_data *data = iio_priv(indio_dev);
|
||||
|
||||
iio_device_unregister(indio_dev);
|
||||
|
||||
return jsa1212_power_off(data);
|
||||
}
|
||||
|
||||
#ifdef CONFIG_PM_SLEEP
|
||||
static int jsa1212_suspend(struct device *dev)
|
||||
{
|
||||
struct jsa1212_data *data;
|
||||
|
||||
data = iio_priv(i2c_get_clientdata(to_i2c_client(dev)));
|
||||
|
||||
return jsa1212_power_off(data);
|
||||
}
|
||||
|
||||
static int jsa1212_resume(struct device *dev)
|
||||
{
|
||||
int ret = 0;
|
||||
struct jsa1212_data *data;
|
||||
|
||||
data = iio_priv(i2c_get_clientdata(to_i2c_client(dev)));
|
||||
|
||||
mutex_lock(&data->lock);
|
||||
|
||||
if (data->als_en) {
|
||||
ret = jsa1212_als_enable(data, JSA1212_CONF_ALS_ENABLE);
|
||||
if (ret < 0) {
|
||||
dev_err(dev, "als resume failed\n");
|
||||
goto unlock_and_ret;
|
||||
}
|
||||
}
|
||||
|
||||
if (data->pxs_en) {
|
||||
ret = jsa1212_pxs_enable(data, JSA1212_CONF_PXS_ENABLE);
|
||||
if (ret < 0)
|
||||
dev_err(dev, "pxs resume failed\n");
|
||||
}
|
||||
|
||||
unlock_and_ret:
|
||||
mutex_unlock(&data->lock);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static SIMPLE_DEV_PM_OPS(jsa1212_pm_ops, jsa1212_suspend, jsa1212_resume);
|
||||
|
||||
#define JSA1212_PM_OPS (&jsa1212_pm_ops)
|
||||
#else
|
||||
#define JSA1212_PM_OPS NULL
|
||||
#endif
|
||||
|
||||
static const struct acpi_device_id jsa1212_acpi_match[] = {
|
||||
{"JSA1212", 0},
|
||||
{ },
|
||||
};
|
||||
MODULE_DEVICE_TABLE(acpi, jsa1212_acpi_match);
|
||||
|
||||
static const struct i2c_device_id jsa1212_id[] = {
|
||||
{ JSA1212_DRIVER_NAME, 0 },
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(i2c, jsa1212_id);
|
||||
|
||||
static struct i2c_driver jsa1212_driver = {
|
||||
.driver = {
|
||||
.name = JSA1212_DRIVER_NAME,
|
||||
.pm = JSA1212_PM_OPS,
|
||||
.owner = THIS_MODULE,
|
||||
.acpi_match_table = ACPI_PTR(jsa1212_acpi_match),
|
||||
},
|
||||
.probe = jsa1212_probe,
|
||||
.remove = jsa1212_remove,
|
||||
.id_table = jsa1212_id,
|
||||
};
|
||||
module_i2c_driver(jsa1212_driver);
|
||||
|
||||
MODULE_AUTHOR("Sathya Kuppuswamy <sathyanarayanan.kuppuswamy@linux.intel.com>");
|
||||
MODULE_DESCRIPTION("JSA1212 proximity/ambient light sensor driver");
|
||||
MODULE_LICENSE("GPL v2");
|
Loading…
Reference in New Issue
Block a user