From f0ed67ec607f6c4e99aa5bb0bd5ac184bcaa5908 Mon Sep 17 00:00:00 2001 From: Mohammed Shafi Shajakhan Date: Fri, 12 Oct 2012 17:40:41 +0530 Subject: [PATCH 001/209] ath6kl: Fix a mismatch in power management debug message Power Save Enabled : REC_POWER - conserve power without sacrificing performance. Power Save Disabled : MAX_PERF_POWER - maximum performance at the expense of power. Hence fix the debug message. Signed-off-by: Mohammed Shafi Shajakhan Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath6kl/cfg80211.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c index 41dea0d5fe0b..459d7004b620 100644 --- a/drivers/net/wireless/ath/ath6kl/cfg80211.c +++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c @@ -1452,10 +1452,10 @@ static int ath6kl_cfg80211_set_power_mgmt(struct wiphy *wiphy, return -EIO; if (pmgmt) { - ath6kl_dbg(ATH6KL_DBG_WLAN_CFG, "%s: max perf\n", __func__); + ath6kl_dbg(ATH6KL_DBG_WLAN_CFG, "%s: rec power\n", __func__); mode.pwr_mode = REC_POWER; } else { - ath6kl_dbg(ATH6KL_DBG_WLAN_CFG, "%s: rec power\n", __func__); + ath6kl_dbg(ATH6KL_DBG_WLAN_CFG, "%s: max perf\n", __func__); mode.pwr_mode = MAX_PERF_POWER; } From f5750c657a94bcc17cd2129368ff00085d475996 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sat, 3 Nov 2012 21:30:25 +0100 Subject: [PATCH 002/209] drivers/net/wireless/ath/ath6kl/hif.c: drop if around WARN_ON Just use WARN_ON rather than an if containing only WARN_ON(1). A simplified version of the semantic patch that makes this transformation is as follows: (http://coccinelle.lip6.fr/) // @@ expression e; @@ - if (e) WARN_ON(1); + WARN_ON(e); // Signed-off-by: Julia Lawall Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath6kl/hif.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/ath/ath6kl/hif.c b/drivers/net/wireless/ath/ath6kl/hif.c index a7a1ec406365..a6b614421fa4 100644 --- a/drivers/net/wireless/ath/ath6kl/hif.c +++ b/drivers/net/wireless/ath/ath6kl/hif.c @@ -339,8 +339,7 @@ static int ath6kl_hif_proc_err_intr(struct ath6kl_device *dev) status = hif_read_write_sync(dev->ar, ERROR_INT_STATUS_ADDRESS, reg_buf, 4, HIF_WR_SYNC_BYTE_FIX); - if (status) - WARN_ON(1); + WARN_ON(status); return status; } @@ -384,8 +383,7 @@ static int ath6kl_hif_proc_cpu_intr(struct ath6kl_device *dev) status = hif_read_write_sync(dev->ar, CPU_INT_STATUS_ADDRESS, reg_buf, 4, HIF_WR_SYNC_BYTE_FIX); - if (status) - WARN_ON(1); + WARN_ON(status); return status; } From 050757da5d54d8e25dc06bfbd9179c7d0073137a Mon Sep 17 00:00:00 2001 From: Mohammed Shafi Shajakhan Date: Fri, 16 Nov 2012 18:21:41 +0530 Subject: [PATCH 003/209] ath6kl: Remove erroneous flag clearing WLAN_ENABLED is vif specific, not part of the driver's struct ath6kl. Proper clearing of this flag is already taken care in ath6kl_cleanup_vif. Cc: wei-jen jlin Signed-off-by: Mohammed Shafi Shajakhan Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath6kl/init.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/net/wireless/ath/ath6kl/init.c b/drivers/net/wireless/ath/ath6kl/init.c index f21fa322e5ca..828cfbf7f72c 100644 --- a/drivers/net/wireless/ath/ath6kl/init.c +++ b/drivers/net/wireless/ath/ath6kl/init.c @@ -1801,8 +1801,6 @@ void ath6kl_stop_txrx(struct ath6kl *ar) "attempting to reset target on instance destroy\n"); ath6kl_reset_device(ar, ar->target_type, true, true); - clear_bit(WLAN_ENABLED, &ar->flag); - up(&ar->sem); } EXPORT_SYMBOL(ath6kl_stop_txrx); From 895dc3867705f7622977c8870771e15881b3e421 Mon Sep 17 00:00:00 2001 From: Mohammed Shafi Shajakhan Date: Fri, 16 Nov 2012 18:22:03 +0530 Subject: [PATCH 004/209] ath6kl: Use standard way to assign the boolean variable Assign 'true' to the bool variable instead of needless typecasting. Signed-off-by: Mohammed Shafi Shajakhan Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath6kl/htc_pipe.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath6kl/htc_pipe.c b/drivers/net/wireless/ath/ath6kl/htc_pipe.c index ba6bd497b787..575e7d74a5d5 100644 --- a/drivers/net/wireless/ath/ath6kl/htc_pipe.c +++ b/drivers/net/wireless/ath/ath6kl/htc_pipe.c @@ -1184,7 +1184,7 @@ static void reset_endpoint_states(struct htc_target *target) INIT_LIST_HEAD(&ep->pipe.tx_lookup_queue); INIT_LIST_HEAD(&ep->rx_bufq); ep->target = target; - ep->pipe.tx_credit_flow_enabled = (bool) 1; /* FIXME */ + ep->pipe.tx_credit_flow_enabled = true; } } From e16ccfeefbba6a268d00eb04145a172ad6e51cd8 Mon Sep 17 00:00:00 2001 From: Mohammed Shafi Shajakhan Date: Fri, 16 Nov 2012 18:22:22 +0530 Subject: [PATCH 005/209] ath6kl: remove unnecessary check for NULL skb dev_kfree_skb kernel API itself takes for checking for NULL skb, so an explicit check is not required. Signed-off-by: Mohammed Shafi Shajakhan Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath6kl/htc_pipe.c | 8 +++----- drivers/net/wireless/ath/ath6kl/usb.c | 6 ++---- drivers/net/wireless/ath/ath6kl/wmi.c | 11 +++-------- 3 files changed, 8 insertions(+), 17 deletions(-) diff --git a/drivers/net/wireless/ath/ath6kl/htc_pipe.c b/drivers/net/wireless/ath/ath6kl/htc_pipe.c index 575e7d74a5d5..73a38f9392f9 100644 --- a/drivers/net/wireless/ath/ath6kl/htc_pipe.c +++ b/drivers/net/wireless/ath/ath6kl/htc_pipe.c @@ -509,9 +509,7 @@ static void destroy_htc_txctrl_packet(struct htc_packet *packet) { struct sk_buff *skb; skb = packet->skb; - if (skb != NULL) - dev_kfree_skb(skb); - + dev_kfree_skb(skb); kfree(packet); } @@ -1054,6 +1052,7 @@ static int ath6kl_htc_pipe_rx_complete(struct ath6kl *ar, struct sk_buff *skb, dev_kfree_skb(skb); skb = NULL; + goto free_skb; } @@ -1089,8 +1088,7 @@ static int ath6kl_htc_pipe_rx_complete(struct ath6kl *ar, struct sk_buff *skb, skb = NULL; free_skb: - if (skb != NULL) - dev_kfree_skb(skb); + dev_kfree_skb(skb); return status; diff --git a/drivers/net/wireless/ath/ath6kl/usb.c b/drivers/net/wireless/ath/ath6kl/usb.c index 62bcc0d5bc23..5fcd342762de 100644 --- a/drivers/net/wireless/ath/ath6kl/usb.c +++ b/drivers/net/wireless/ath/ath6kl/usb.c @@ -159,10 +159,8 @@ static void ath6kl_usb_free_urb_to_pipe(struct ath6kl_usb_pipe *pipe, static void ath6kl_usb_cleanup_recv_urb(struct ath6kl_urb_context *urb_context) { - if (urb_context->skb != NULL) { - dev_kfree_skb(urb_context->skb); - urb_context->skb = NULL; - } + dev_kfree_skb(urb_context->skb); + urb_context->skb = NULL; ath6kl_usb_free_urb_to_pipe(urb_context->pipe, urb_context); } diff --git a/drivers/net/wireless/ath/ath6kl/wmi.c b/drivers/net/wireless/ath/ath6kl/wmi.c index 55ccf9770339..f4ef6a724e4c 100644 --- a/drivers/net/wireless/ath/ath6kl/wmi.c +++ b/drivers/net/wireless/ath/ath6kl/wmi.c @@ -2481,16 +2481,11 @@ static int ath6kl_wmi_sync_point(struct wmi *wmi, u8 if_idx) free_cmd_skb: /* free up any resources left over (possibly due to an error) */ - if (skb) - dev_kfree_skb(skb); + dev_kfree_skb(skb); free_data_skb: - for (index = 0; index < num_pri_streams; index++) { - if (data_sync_bufs[index].skb != NULL) { - dev_kfree_skb((struct sk_buff *)data_sync_bufs[index]. - skb); - } - } + for (index = 0; index < num_pri_streams; index++) + dev_kfree_skb((struct sk_buff *)data_sync_bufs[index].skb); return ret; } From de2070fc4aa7c0205348010f500f5abce012e67b Mon Sep 17 00:00:00 2001 From: Mohammed Shafi Shajakhan Date: Fri, 16 Nov 2012 18:22:40 +0530 Subject: [PATCH 006/209] ath6kl: Fix kernel panic on continuous driver load/unload On continuous loading and unloading of AR6004 ath6kl USB driver it triggers a panic due to NULL pointer dereference of 'target' pointer. while true; do sudo modprobe -v ath6kl_core; sudo modprobe -v ath6kl_usb; sudo modprobe -r usb; sudo modprobe -r ath6kl_core; done ar->htc_target can be NULL due to a race condition that can occur during driver initialization(we do 'ath6kl_hif_power_on' before initializing 'ar->htc_target' via 'ath6kl_htc_create'). 'ath6kl_hif_power_on' assigns 'ath6kl_recv_complete' as usb_complete_t/callback function for 'usb_fill_bulk_urb'. Thus the possibility of ar->htc_target being NULL via ath6kl_recv_complete -> ath6kl_usb_io_comp_work before even 'ath6kl_htc_create' is finished to initialize ar->htc_create. Worth noting is the obvious solution of doing 'ath6kl_hif_power_on' later(i.e after we are done with 'ath6kl_htc_create', causes a h/w bring up failure in AR6003 SDIO, as 'ath6kl_hif_power_on' is a pre-requisite to get the target version 'ath6kl_bmi_get_target_info'. So simply check for NULL pointer for 'ar->htc_target' and bail out. [23614.518282] BUG: unable to handle kernel NULL pointer dereference at 00000904 [23614.518463] IP: [] __ticket_spin_trylock+0x6/0x30 [23614.518570] *pde = 00000000 [23614.518664] Oops: 0000 [#1] SMP [23614.518795] Modules linked in: ath6kl_usb(O+) ath6kl_core(O) [23614.520012] EIP: 0060:[] EFLAGS: 00010286 CPU: 0 [23614.520012] EIP is at __ticket_spin_trylock+0x6/0x30 Call Trace: [] do_raw_spin_trylock+0x14/0x40 [] _raw_spin_lock_bh+0x52/0x80 [] ? ath6kl_htc_pipe_rx_complete+0x3b4/0x4c0 [ath6kl_core] [] ath6kl_htc_pipe_rx_complete+0x3b4/0x4c0 [ath6kl_core] [] ? skb_dequeue+0x22/0x70 [] ? skb_dequeue+0x22/0x70 [] ath6kl_core_rx_complete+0x12/0x20 [ath6kl_core] [] ath6kl_usb_io_comp_work+0xaa/0xb0 [ath6kl_usb] [] process_one_work+0x1a3/0x5e0 [] ? process_one_work+0x127/0x5e0 [] ? ath6kl_usb_reset_resume+0x30/0x30 [ath6kl_usb] [] worker_thread+0x11e/0x3f0 Kernel panic - not syncing: Fatal exception in interrupt Signed-off-by: Mohammed Shafi Shajakhan Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath6kl/htc_pipe.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/drivers/net/wireless/ath/ath6kl/htc_pipe.c b/drivers/net/wireless/ath/ath6kl/htc_pipe.c index 73a38f9392f9..281390178e3d 100644 --- a/drivers/net/wireless/ath/ath6kl/htc_pipe.c +++ b/drivers/net/wireless/ath/ath6kl/htc_pipe.c @@ -967,6 +967,22 @@ static int ath6kl_htc_pipe_rx_complete(struct ath6kl *ar, struct sk_buff *skb, u16 payload_len; int status = 0; + /* + * ar->htc_target can be NULL due to a race condition that can occur + * during driver initialization(we do 'ath6kl_hif_power_on' before + * initializing 'ar->htc_target' via 'ath6kl_htc_create'). + * 'ath6kl_hif_power_on' assigns 'ath6kl_recv_complete' as + * usb_complete_t/callback function for 'usb_fill_bulk_urb'. + * Thus the possibility of ar->htc_target being NULL + * via ath6kl_recv_complete -> ath6kl_usb_io_comp_work. + */ + if (WARN_ON_ONCE(!target)) { + ath6kl_err("Target not yet initialized\n"); + status = -EINVAL; + goto free_skb; + } + + netdata = skb->data; netlen = skb->len; From 8aa659d2c9ad2df8873c5ba1d7f030d6acf39c4c Mon Sep 17 00:00:00 2001 From: Mohammed Shafi Shajakhan Date: Fri, 16 Nov 2012 18:22:57 +0530 Subject: [PATCH 007/209] ath6kl: trivial cleanup on interface type selection a minor cleanup in assigning the driver specific network type based on interface type. Signed-off-by: Mohammed Shafi Shajakhan Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath6kl/cfg80211.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c index 459d7004b620..cea885617d61 100644 --- a/drivers/net/wireless/ath/ath6kl/cfg80211.c +++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c @@ -1557,17 +1557,13 @@ static int ath6kl_cfg80211_change_iface(struct wiphy *wiphy, set_iface_type: switch (type) { case NL80211_IFTYPE_STATION: + case NL80211_IFTYPE_P2P_CLIENT: vif->next_mode = INFRA_NETWORK; break; case NL80211_IFTYPE_ADHOC: vif->next_mode = ADHOC_NETWORK; break; case NL80211_IFTYPE_AP: - vif->next_mode = AP_NETWORK; - break; - case NL80211_IFTYPE_P2P_CLIENT: - vif->next_mode = INFRA_NETWORK; - break; case NL80211_IFTYPE_P2P_GO: vif->next_mode = AP_NETWORK; break; From eb922e4b41fd315f4ef95fef0ca1051b61cd5538 Mon Sep 17 00:00:00 2001 From: Mohammed Shafi Shajakhan Date: Fri, 16 Nov 2012 18:23:15 +0530 Subject: [PATCH 008/209] ath6kl: Parse beacon interval from userspace Parse beacon interval from userspace to firmware. Incase the firmware does not supports it, just print a warning message and continue with AP settings. Cc: Sumathi Mandipati Signed-off-by: Mohammed Shafi Shajakhan Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath6kl/cfg80211.c | 8 +++++--- drivers/net/wireless/ath/ath6kl/wmi.c | 17 +++++++++++++++++ drivers/net/wireless/ath/ath6kl/wmi.h | 6 ++++++ 3 files changed, 28 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c index cea885617d61..f253d6684d8f 100644 --- a/drivers/net/wireless/ath/ath6kl/cfg80211.c +++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c @@ -2770,9 +2770,11 @@ static int ath6kl_start_ap(struct wiphy *wiphy, struct net_device *dev, ar->ap_mode_bkey.valid = false; - /* TODO: - * info->interval - */ + ret = ath6kl_wmi_ap_set_beacon_intvl_cmd(ar->wmi, vif->fw_vif_idx, + info->beacon_interval); + + if (ret) + ath6kl_warn("Failed to set beacon interval: %d\n", ret); ret = ath6kl_wmi_ap_set_dtim_cmd(ar->wmi, vif->fw_vif_idx, info->dtim_period); diff --git a/drivers/net/wireless/ath/ath6kl/wmi.c b/drivers/net/wireless/ath/ath6kl/wmi.c index f4ef6a724e4c..a0503c2e7a7e 100644 --- a/drivers/net/wireless/ath/ath6kl/wmi.c +++ b/drivers/net/wireless/ath/ath6kl/wmi.c @@ -752,6 +752,23 @@ int ath6kl_wmi_force_roam_cmd(struct wmi *wmi, const u8 *bssid) NO_SYNC_WMIFLAG); } +int ath6kl_wmi_ap_set_beacon_intvl_cmd(struct wmi *wmi, u8 if_idx, + u32 beacon_intvl) +{ + struct sk_buff *skb; + struct set_beacon_int_cmd *cmd; + + skb = ath6kl_wmi_get_new_buf(sizeof(*cmd)); + if (!skb) + return -ENOMEM; + + cmd = (struct set_beacon_int_cmd *) skb->data; + + cmd->beacon_intvl = cpu_to_le32(beacon_intvl); + return ath6kl_wmi_cmd_send(wmi, if_idx, skb, + WMI_SET_BEACON_INT_CMDID, NO_SYNC_WMIFLAG); +} + int ath6kl_wmi_ap_set_dtim_cmd(struct wmi *wmi, u8 if_idx, u32 dtim_period) { struct sk_buff *skb; diff --git a/drivers/net/wireless/ath/ath6kl/wmi.h b/drivers/net/wireless/ath/ath6kl/wmi.h index 98b1755e67f4..b5f226503baf 100644 --- a/drivers/net/wireless/ath/ath6kl/wmi.h +++ b/drivers/net/wireless/ath/ath6kl/wmi.h @@ -1660,6 +1660,10 @@ struct roam_ctrl_cmd { u8 roam_ctrl; } __packed; +struct set_beacon_int_cmd { + __le32 beacon_intvl; +} __packed; + struct set_dtim_cmd { __le32 dtim_period; } __packed; @@ -2649,6 +2653,8 @@ int ath6kl_wmi_del_wow_pattern_cmd(struct wmi *wmi, u8 if_idx, int ath6kl_wmi_set_rssi_filter_cmd(struct wmi *wmi, u8 if_idx, s8 rssi); int ath6kl_wmi_set_roam_lrssi_cmd(struct wmi *wmi, u8 lrssi); int ath6kl_wmi_ap_set_dtim_cmd(struct wmi *wmi, u8 if_idx, u32 dtim_period); +int ath6kl_wmi_ap_set_beacon_intvl_cmd(struct wmi *wmi, u8 if_idx, + u32 beacon_interval); int ath6kl_wmi_force_roam_cmd(struct wmi *wmi, const u8 *bssid); int ath6kl_wmi_set_roam_mode_cmd(struct wmi *wmi, enum wmi_roam_mode mode); int ath6kl_wmi_mcast_filter_cmd(struct wmi *wmi, u8 if_idx, bool mc_all_on); From 355b3a982095c8647cce13dd43ebc4bc4299f31a Mon Sep 17 00:00:00 2001 From: Mohammed Shafi Shajakhan Date: Fri, 16 Nov 2012 18:23:36 +0530 Subject: [PATCH 009/209] ath6kl: Move and rename ath6kl_cleanup_vif function Rename ath6kl_cleanup_vif function as 'ath6kl_cfg80211_vif_stop' which is the more appropriate name considering the functionality of the module and vif specific cleanup is actually done by ath6kl_cfg80211_vif_cleanup. Also move it to cfg80211.c. Also make ath6kl_cfg80211_sta_bmiss_enhance as static function. This addresses a FIXME/TODO. Signed-off-by: Mohammed Shafi Shajakhan Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath6kl/cfg80211.c | 81 +++++++++++++++------- drivers/net/wireless/ath/ath6kl/cfg80211.h | 2 - drivers/net/wireless/ath/ath6kl/core.h | 2 +- drivers/net/wireless/ath/ath6kl/init.c | 34 +-------- 4 files changed, 58 insertions(+), 61 deletions(-) diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c index f253d6684d8f..e9783166e8db 100644 --- a/drivers/net/wireless/ath/ath6kl/cfg80211.c +++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c @@ -427,6 +427,30 @@ static bool ath6kl_is_tx_pending(struct ath6kl *ar) return ar->tx_pending[ath6kl_wmi_get_control_ep(ar->wmi)] == 0; } +static void ath6kl_cfg80211_sta_bmiss_enhance(struct ath6kl_vif *vif, + bool enable) +{ + int err; + + if (WARN_ON(!test_bit(WMI_READY, &vif->ar->flag))) + return; + + if (vif->nw_type != INFRA_NETWORK) + return; + + if (!test_bit(ATH6KL_FW_CAPABILITY_BMISS_ENHANCE, + vif->ar->fw_capabilities)) + return; + + ath6kl_dbg(ATH6KL_DBG_WLAN_CFG, "%s fw bmiss enhance\n", + enable ? "enable" : "disable"); + + err = ath6kl_wmi_sta_bmiss_enhance_cmd(vif->ar->wmi, + vif->fw_vif_idx, enable); + if (err) + ath6kl_err("failed to %s enhanced bmiss detection: %d\n", + enable ? "enable" : "disable", err); +} static int ath6kl_cfg80211_connect(struct wiphy *wiphy, struct net_device *dev, struct cfg80211_connect_params *sme) @@ -1507,7 +1531,7 @@ static int ath6kl_cfg80211_del_iface(struct wiphy *wiphy, list_del(&vif->list); spin_unlock_bh(&ar->list_lock); - ath6kl_cleanup_vif(vif, test_bit(WMI_READY, &ar->flag)); + ath6kl_cfg80211_vif_stop(vif, test_bit(WMI_READY, &ar->flag)); ath6kl_cfg80211_vif_cleanup(vif); @@ -2667,30 +2691,6 @@ static int ath6kl_set_ies(struct ath6kl_vif *vif, return 0; } -void ath6kl_cfg80211_sta_bmiss_enhance(struct ath6kl_vif *vif, bool enable) -{ - int err; - - if (WARN_ON(!test_bit(WMI_READY, &vif->ar->flag))) - return; - - if (vif->nw_type != INFRA_NETWORK) - return; - - if (!test_bit(ATH6KL_FW_CAPABILITY_BMISS_ENHANCE, - vif->ar->fw_capabilities)) - return; - - ath6kl_dbg(ATH6KL_DBG_WLAN_CFG, "%s fw bmiss enhance\n", - enable ? "enable" : "disable"); - - err = ath6kl_wmi_sta_bmiss_enhance_cmd(vif->ar->wmi, - vif->fw_vif_idx, enable); - if (err) - ath6kl_err("failed to %s enhanced bmiss detection: %d\n", - enable ? "enable" : "disable", err); -} - static int ath6kl_get_rsn_capab(struct cfg80211_beacon_data *beacon, u8 *rsn_capab) { @@ -3561,6 +3561,37 @@ static int ath6kl_cfg80211_vif_init(struct ath6kl_vif *vif) return 0; } +void ath6kl_cfg80211_vif_stop(struct ath6kl_vif *vif, bool wmi_ready) +{ + static u8 bcast_mac[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff}; + bool discon_issued; + + netif_stop_queue(vif->ndev); + + clear_bit(WLAN_ENABLED, &vif->flags); + + if (wmi_ready) { + discon_issued = test_bit(CONNECTED, &vif->flags) || + test_bit(CONNECT_PEND, &vif->flags); + ath6kl_disconnect(vif); + del_timer(&vif->disconnect_timer); + + if (discon_issued) + ath6kl_disconnect_event(vif, DISCONNECT_CMD, + (vif->nw_type & AP_NETWORK) ? + bcast_mac : vif->bssid, + 0, NULL, 0); + } + + if (vif->scan_req) { + cfg80211_scan_done(vif->scan_req, true); + vif->scan_req = NULL; + } + + /* need to clean up enhanced bmiss detection fw state */ + ath6kl_cfg80211_sta_bmiss_enhance(vif, false); +} + void ath6kl_cfg80211_vif_cleanup(struct ath6kl_vif *vif) { struct ath6kl *ar = vif->ar; diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.h b/drivers/net/wireless/ath/ath6kl/cfg80211.h index e5e70f3a8ca8..b59becd91aea 100644 --- a/drivers/net/wireless/ath/ath6kl/cfg80211.h +++ b/drivers/net/wireless/ath/ath6kl/cfg80211.h @@ -61,7 +61,5 @@ void ath6kl_cfg80211_cleanup(struct ath6kl *ar); struct ath6kl *ath6kl_cfg80211_create(void); void ath6kl_cfg80211_destroy(struct ath6kl *ar); -/* TODO: remove this once ath6kl_vif_cleanup() is moved to cfg80211.c */ -void ath6kl_cfg80211_sta_bmiss_enhance(struct ath6kl_vif *vif, bool enable); #endif /* ATH6KL_CFG80211_H */ diff --git a/drivers/net/wireless/ath/ath6kl/core.h b/drivers/net/wireless/ath/ath6kl/core.h index 189d8faf8c87..61b2f98b4e77 100644 --- a/drivers/net/wireless/ath/ath6kl/core.h +++ b/drivers/net/wireless/ath/ath6kl/core.h @@ -940,7 +940,7 @@ void ath6kl_reset_device(struct ath6kl *ar, u32 target_type, bool wait_fot_compltn, bool cold_reset); void ath6kl_init_control_info(struct ath6kl_vif *vif); struct ath6kl_vif *ath6kl_vif_first(struct ath6kl *ar); -void ath6kl_cleanup_vif(struct ath6kl_vif *vif, bool wmi_ready); +void ath6kl_cfg80211_vif_stop(struct ath6kl_vif *vif, bool wmi_ready); int ath6kl_init_hw_start(struct ath6kl *ar); int ath6kl_init_hw_stop(struct ath6kl *ar); int ath6kl_init_fetch_firmwares(struct ath6kl *ar); diff --git a/drivers/net/wireless/ath/ath6kl/init.c b/drivers/net/wireless/ath/ath6kl/init.c index 828cfbf7f72c..5d434cf88f35 100644 --- a/drivers/net/wireless/ath/ath6kl/init.c +++ b/drivers/net/wireless/ath/ath6kl/init.c @@ -1715,38 +1715,6 @@ void ath6kl_init_hw_restart(struct ath6kl *ar) } } -/* FIXME: move this to cfg80211.c and rename to ath6kl_cfg80211_vif_stop() */ -void ath6kl_cleanup_vif(struct ath6kl_vif *vif, bool wmi_ready) -{ - static u8 bcast_mac[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff}; - bool discon_issued; - - netif_stop_queue(vif->ndev); - - clear_bit(WLAN_ENABLED, &vif->flags); - - if (wmi_ready) { - discon_issued = test_bit(CONNECTED, &vif->flags) || - test_bit(CONNECT_PEND, &vif->flags); - ath6kl_disconnect(vif); - del_timer(&vif->disconnect_timer); - - if (discon_issued) - ath6kl_disconnect_event(vif, DISCONNECT_CMD, - (vif->nw_type & AP_NETWORK) ? - bcast_mac : vif->bssid, - 0, NULL, 0); - } - - if (vif->scan_req) { - cfg80211_scan_done(vif->scan_req, true); - vif->scan_req = NULL; - } - - /* need to clean up enhanced bmiss detection fw state */ - ath6kl_cfg80211_sta_bmiss_enhance(vif, false); -} - void ath6kl_stop_txrx(struct ath6kl *ar) { struct ath6kl_vif *vif, *tmp_vif; @@ -1766,7 +1734,7 @@ void ath6kl_stop_txrx(struct ath6kl *ar) list_for_each_entry_safe(vif, tmp_vif, &ar->vif_list, list) { list_del(&vif->list); spin_unlock_bh(&ar->list_lock); - ath6kl_cleanup_vif(vif, test_bit(WMI_READY, &ar->flag)); + ath6kl_cfg80211_vif_stop(vif, test_bit(WMI_READY, &ar->flag)); rtnl_lock(); ath6kl_cfg80211_vif_cleanup(vif); rtnl_unlock(); From 6f7c1adb7529935df6e288a1436003c1f6dc0653 Mon Sep 17 00:00:00 2001 From: Mohammed Shafi Shajakhan Date: Fri, 16 Nov 2012 18:24:37 +0530 Subject: [PATCH 010/209] ath6kl: minor optimization using if, else if Signed-off-by: Mohammed Shafi Shajakhan Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath6kl/cfg80211.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c index e9783166e8db..ac0761c61ac1 100644 --- a/drivers/net/wireless/ath/ath6kl/cfg80211.c +++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c @@ -640,13 +640,13 @@ static int ath6kl_cfg80211_connect(struct wiphy *wiphy, struct net_device *dev, vif->req_bssid, vif->ch_hint, ar->connect_ctrl_flags, nw_subtype); - /* disable background scan if period is 0 */ - if (sme->bg_scan_period == 0) + if (sme->bg_scan_period == 0) { + /* disable background scan if period is 0 */ sme->bg_scan_period = 0xffff; - - /* configure default value if not specified */ - if (sme->bg_scan_period == -1) + } else if (sme->bg_scan_period == -1) { + /* configure default value if not specified */ sme->bg_scan_period = DEFAULT_BG_SCAN_PERIOD; + } ath6kl_wmi_scanparams_cmd(ar->wmi, vif->fw_vif_idx, 0, 0, sme->bg_scan_period, 0, 0, 0, 3, 0, 0, 0); From 8df6b7b11a5e4200484e9356073d288f08bdefb0 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Mon, 28 Jan 2013 14:42:30 +0100 Subject: [PATCH 011/209] mac80211: remove IEEE80211_HW_TEARDOWN_AGGR_ON_BAR_FAIL This is basically a revert of: commit 5b632fe85ec82e5c43740b52e74c66df50a37db3 Author: Stanislaw Gruszka Date: Mon Dec 3 12:56:33 2012 +0100 mac80211: introduce IEEE80211_HW_TEARDOWN_AGGR_ON_BAR_FAIL We do not need this flag any longer, rt2x00 BAR/BA problem was fixed correctly by wireless-testing commit: commit 84e9e8ebd369679a958200a8baca96aafb2393bb Author: Helmut Schaa Date: Thu Jan 17 17:34:32 2013 +0100 rt2x00: Improve TX status handling for BlockAckReq frames Signed-off-by: Stanislaw Gruszka Signed-off-by: Johannes Berg --- include/net/mac80211.h | 5 ----- net/mac80211/status.c | 6 +----- 2 files changed, 1 insertion(+), 10 deletions(-) diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 5c98d654fc75..21831ee57e3c 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1366,10 +1366,6 @@ struct ieee80211_tx_control { * @IEEE80211_HW_P2P_DEV_ADDR_FOR_INTF: Use the P2P Device address for any * P2P Interface. This will be honoured even if more than one interface * is supported. - * - * @IEEE80211_HW_TEARDOWN_AGGR_ON_BAR_FAIL: On this hardware TX BA session - * should be tear down once BAR frame will not be acked. - * */ enum ieee80211_hw_flags { IEEE80211_HW_HAS_RATE_CONTROL = 1<<0, @@ -1398,7 +1394,6 @@ enum ieee80211_hw_flags { IEEE80211_HW_TX_AMPDU_SETUP_IN_HW = 1<<23, IEEE80211_HW_SCAN_WHILE_IDLE = 1<<24, IEEE80211_HW_P2P_DEV_ADDR_FOR_INTF = 1<<25, - IEEE80211_HW_TEARDOWN_AGGR_ON_BAR_FAIL = 1<<26, }; /** diff --git a/net/mac80211/status.c b/net/mac80211/status.c index 07d99578a2b1..ab50285fcbab 100644 --- a/net/mac80211/status.c +++ b/net/mac80211/status.c @@ -502,11 +502,7 @@ void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb) IEEE80211_BAR_CTRL_TID_INFO_MASK) >> IEEE80211_BAR_CTRL_TID_INFO_SHIFT; - if (local->hw.flags & - IEEE80211_HW_TEARDOWN_AGGR_ON_BAR_FAIL) - ieee80211_stop_tx_ba_session(&sta->sta, tid); - else - ieee80211_set_bar_pending(sta, tid, ssn); + ieee80211_set_bar_pending(sta, tid, ssn); } } From 8dcf011ab05bf1fdd9323a9c460bdd0e325b99e1 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sat, 26 Jan 2013 22:16:08 +0100 Subject: [PATCH 012/209] cfg80211: add SME state to warning in __cfg80211_mlme_disassoc The warning here occasionally triggers but we haven't found the cause yet. It's a valid warning since if it triggers the SME state got confused, so add the SME state to it to help narrow it down in the future. Signed-off-by: Johannes Berg --- net/wireless/mlme.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/wireless/mlme.c b/net/wireless/mlme.c index 461e692cdfec..fee9bf70efcf 100644 --- a/net/wireless/mlme.c +++ b/net/wireless/mlme.c @@ -514,7 +514,7 @@ static int __cfg80211_mlme_disassoc(struct cfg80211_registered_device *rdev, if (wdev->sme_state != CFG80211_SME_CONNECTED) return -ENOTCONN; - if (WARN_ON(!wdev->current_bss)) + if (WARN(!wdev->current_bss, "sme_state=%d\n", wdev->sme_state)) return -ENOTCONN; memset(&req, 0, sizeof(req)); From ef3d56e189754e305add852110c3d6d863b6293c Mon Sep 17 00:00:00 2001 From: Waldemar Rymarkiewicz Date: Wed, 16 Jan 2013 15:51:51 +0100 Subject: [PATCH 013/209] nfc: pn533: Use static poll_mod and std_frame_ops These variables are not exported. Signed-off-by: Waldemar Rymarkiewicz Signed-off-by: Samuel Ortiz --- drivers/nfc/pn533.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index f696318cfb51..0d7caf782571 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -219,7 +219,7 @@ struct pn533_poll_modulations { u8 len; }; -const struct pn533_poll_modulations poll_mod[] = { +static const struct pn533_poll_modulations poll_mod[] = { [PN533_POLL_MOD_106KBPS_A] = { .data = { .maxtg = 1, @@ -485,7 +485,7 @@ static u8 pn533_get_cmd_code(void *frame) return PN533_FRAME_CMD(f); } -struct pn533_frame_ops pn533_std_frame_ops = { +static struct pn533_frame_ops pn533_std_frame_ops = { .tx_frame_init = pn533_tx_frame_init, .tx_frame_finish = pn533_tx_frame_finish, .tx_update_payload_len = pn533_tx_update_payload_len, From 2323e6fc62eec19c3454642c0ac4ad42374b40a1 Mon Sep 17 00:00:00 2001 From: Waldemar Rymarkiewicz Date: Wed, 16 Jan 2013 15:51:52 +0100 Subject: [PATCH 014/209] nfc: pn533: Remove unreachable code Signed-off-by: Waldemar Rymarkiewicz Signed-off-by: Samuel Ortiz --- drivers/nfc/pn533.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index 0d7caf782571..bd5c41b481d3 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -532,7 +532,6 @@ static void pn533_recv_response(struct urb *urb) urb->status); dev->wq_in_error = urb->status; goto sched_wq; - break; case -ESHUTDOWN: default: nfc_dev_err(&dev->interface->dev, @@ -589,7 +588,6 @@ static void pn533_recv_ack(struct urb *urb) urb->status); dev->wq_in_error = urb->status; goto sched_wq; - break; case -ESHUTDOWN: default: nfc_dev_err(&dev->interface->dev, From 3b144658bc7be5f7fa68d13ba24afb4c24489965 Mon Sep 17 00:00:00 2001 From: Thomas Pedersen Date: Sat, 26 Jan 2013 16:39:55 -0800 Subject: [PATCH 015/209] mac80211: dynamic short slot time for MBSSs The standard mandates mesh STAs to set the ERP Short Slot Time capability info bit in beacons to 0. Even though this is their way of disallowing short slot time for mesh STAs, there should be no harm in enabling it if we determine all STAs in the current MBSS support ERP rates. Increases throughput about 20% for legacy rates when enabled. Signed-off-by: Thomas Pedersen Signed-off-by: Johannes Berg --- net/mac80211/mesh.c | 5 ---- net/mac80211/mesh_plink.c | 63 +++++++++++++++++++++++++++++++++++++++ 2 files changed, 63 insertions(+), 5 deletions(-) diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index 694e27376afa..f920da1201ab 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -629,11 +629,6 @@ void ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata) sdata->vif.bss_conf.basic_rates = ieee80211_mandatory_rates(local, band); - if (band == IEEE80211_BAND_5GHZ) { - sdata->vif.bss_conf.use_short_slot = true; - changed |= BSS_CHANGED_ERP_SLOT; - } - ieee80211_bss_info_change_notify(sdata, changed); netif_carrier_on(sdata->dev); diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c index 81e612682bc3..6787d696d94c 100644 --- a/net/mac80211/mesh_plink.c +++ b/net/mac80211/mesh_plink.c @@ -55,6 +55,66 @@ static inline void mesh_plink_fsm_restart(struct sta_info *sta) sta->plink_retries = 0; } +/* + * mesh_set_short_slot_time - enable / disable ERP short slot time. + * + * The standard indirectly mandates mesh STAs to turn off short slot time by + * disallowing advertising this (802.11-2012 8.4.1.4), but that doesn't mean we + * can't be sneaky about it. Enable short slot time if all mesh STAs in the + * MBSS support ERP rates. + * + * Returns BSS_CHANGED_ERP_SLOT or 0 for no change. + */ +static u32 mesh_set_short_slot_time(struct ieee80211_sub_if_data *sdata) +{ + struct ieee80211_local *local = sdata->local; + enum ieee80211_band band = ieee80211_get_sdata_band(sdata); + struct ieee80211_supported_band *sband = local->hw.wiphy->bands[band]; + struct sta_info *sta; + u32 erp_rates = 0, changed = 0; + int i; + bool short_slot = false; + + if (band == IEEE80211_BAND_5GHZ) { + /* (IEEE 802.11-2012 19.4.5) */ + short_slot = true; + goto out; + } else if (band != IEEE80211_BAND_2GHZ || + (band == IEEE80211_BAND_2GHZ && + local->hw.flags & IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE)) + goto out; + + for (i = 0; i < sband->n_bitrates; i++) + if (sband->bitrates[i].flags & IEEE80211_RATE_ERP_G) + erp_rates |= BIT(i); + + if (!erp_rates) + goto out; + + rcu_read_lock(); + list_for_each_entry_rcu(sta, &local->sta_list, list) { + if (sdata != sta->sdata || + sta->plink_state != NL80211_PLINK_ESTAB) + continue; + + short_slot = false; + if (erp_rates & sta->sta.supp_rates[band]) + short_slot = true; + else + break; + } + rcu_read_unlock(); + +out: + if (sdata->vif.bss_conf.use_short_slot != short_slot) { + sdata->vif.bss_conf.use_short_slot = short_slot; + changed = BSS_CHANGED_ERP_SLOT; + mpl_dbg(sdata, "mesh_plink %pM: ERP short slot time %d\n", + sdata->vif.addr, short_slot); + } + return changed; +} + /** * mesh_set_ht_prot_mode - set correct HT protection mode * @@ -896,6 +956,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m spin_unlock_bh(&sta->lock); changed |= mesh_plink_inc_estab_count(sdata); changed |= mesh_set_ht_prot_mode(sdata); + changed |= mesh_set_short_slot_time(sdata); mpl_dbg(sdata, "Mesh plink with %pM ESTABLISHED\n", sta->sta.addr); break; @@ -931,6 +992,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m spin_unlock_bh(&sta->lock); changed |= mesh_plink_inc_estab_count(sdata); changed |= mesh_set_ht_prot_mode(sdata); + changed |= mesh_set_short_slot_time(sdata); mpl_dbg(sdata, "Mesh plink with %pM ESTABLISHED\n", sta->sta.addr); mesh_plink_frame_tx(sdata, @@ -954,6 +1016,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m mod_plink_timer(sta, mshcfg->dot11MeshHoldingTimeout); spin_unlock_bh(&sta->lock); changed |= mesh_set_ht_prot_mode(sdata); + changed |= mesh_set_short_slot_time(sdata); mesh_plink_frame_tx(sdata, WLAN_SP_MESH_PEERING_CLOSE, sta->sta.addr, llid, plid, reason); break; From cd8f7cb4e6dfa4ea08fc250a814240b883ef7911 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 22 Jan 2013 12:34:29 +0100 Subject: [PATCH 016/209] cfg80211/mac80211: support reporting wakeup reason When waking up from WoWLAN, it is useful to know what triggered the wakeup. Support reporting the wakeup reason(s) in cfg80211 (and a pass-through in mac80211) to allow userspace to know. Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 41 +++++++++++++++ include/net/mac80211.h | 12 +++++ include/uapi/linux/nl80211.h | 31 ++++++++++++ net/mac80211/pm.c | 10 ++++ net/wireless/nl80211.c | 97 ++++++++++++++++++++++++++++++++++++ net/wireless/trace.h | 35 +++++++++++++ 6 files changed, 226 insertions(+) diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 36e076e374d2..48add7e3ba1d 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1596,6 +1596,32 @@ struct cfg80211_wowlan { int n_patterns; }; +/** + * struct cfg80211_wowlan_wakeup - wakeup report + * @disconnect: woke up by getting disconnected + * @magic_pkt: woke up by receiving magic packet + * @gtk_rekey_failure: woke up by GTK rekey failure + * @eap_identity_req: woke up by EAP identity request packet + * @four_way_handshake: woke up by 4-way handshake + * @rfkill_release: woke up by rfkill being released + * @pattern_idx: pattern that caused wakeup, -1 if not due to pattern + * @packet_present_len: copied wakeup packet data + * @packet_len: original wakeup packet length + * @packet: The packet causing the wakeup, if any. + * @packet_80211: For pattern match, magic packet and other data + * frame triggers an 802.3 frame should be reported, for + * disconnect due to deauth 802.11 frame. This indicates which + * it is. + */ +struct cfg80211_wowlan_wakeup { + bool disconnect, magic_pkt, gtk_rekey_failure, + eap_identity_req, four_way_handshake, + rfkill_release, packet_80211; + s32 pattern_idx; + u32 packet_present_len, packet_len; + const void *packet; +}; + /** * struct cfg80211_gtk_rekey_data - rekey data * @kek: key encryption key @@ -3852,6 +3878,21 @@ int cfg80211_get_p2p_attr(const u8 *ies, unsigned int len, enum ieee80211_p2p_attr_id attr, u8 *buf, unsigned int bufsize); +/** + * cfg80211_report_wowlan_wakeup - report wakeup from WoWLAN + * @wdev: the wireless device reporting the wakeup + * @wakeup: the wakeup report + * @gfp: allocation flags + * + * This function reports that the given device woke up. If it + * caused the wakeup, report the reason(s), otherwise you may + * pass %NULL as the @wakeup parameter to advertise that something + * else caused the wakeup. + */ +void cfg80211_report_wowlan_wakeup(struct wireless_dev *wdev, + struct cfg80211_wowlan_wakeup *wakeup, + gfp_t gfp); + /* Logging, debugging and troubleshooting/diagnostic helpers. */ /* wiphy_printk helpers, similar to dev_printk */ diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 21831ee57e3c..7a27e00c513a 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -4206,4 +4206,16 @@ void ieee80211_disable_rssi_reports(struct ieee80211_vif *vif); */ int ieee80211_ave_rssi(struct ieee80211_vif *vif); +/** + * ieee80211_report_wowlan_wakeup - report WoWLAN wakeup + * @vif: virtual interface + * @wakeup: wakeup reason(s) + * @gfp: allocation flags + * + * See cfg80211_report_wowlan_wakeup(). + */ +void ieee80211_report_wowlan_wakeup(struct ieee80211_vif *vif, + struct cfg80211_wowlan_wakeup *wakeup, + gfp_t gfp); + #endif /* MAC80211_H */ diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 5b7dbc1ea966..225a65e72219 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -513,6 +513,12 @@ * command with the %NL80211_ATTR_WOWLAN_TRIGGERS attribute. For * more background information, see * http://wireless.kernel.org/en/users/Documentation/WoWLAN. + * The @NL80211_CMD_SET_WOWLAN command can also be used as a notification + * from the driver reporting the wakeup reason. In this case, the + * @NL80211_ATTR_WOWLAN_TRIGGERS attribute will contain the reason + * for the wakeup, if it was caused by wireless. If it is not present + * in the wakeup notification, the wireless device didn't cause the + * wakeup but reports that it was woken up. * * @NL80211_CMD_SET_REKEY_OFFLOAD: This command is used give the driver * the necessary information for supporting GTK rekey offload. This @@ -2947,6 +2953,10 @@ struct nl80211_wowlan_pattern_support { * * In %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, it is a binary attribute * carrying a &struct nl80211_wowlan_pattern_support. + * + * When reporting wakeup. it is a u32 attribute containing the 0-based + * index of the pattern that caused the wakeup, in the patterns passed + * to the kernel when configuring. * @NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED: Not a real trigger, and cannot be * used when setting, used only to indicate that GTK rekeying is supported * by the device (flag) @@ -2957,8 +2967,25 @@ struct nl80211_wowlan_pattern_support { * @NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE: wake up on 4-way handshake (flag) * @NL80211_WOWLAN_TRIG_RFKILL_RELEASE: wake up when rfkill is released * (on devices that have rfkill in the device) (flag) + * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211: For wakeup reporting only, contains + * the 802.11 packet that caused the wakeup, e.g. a deauth frame. The frame + * may be truncated, the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN + * attribute contains the original length. + * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN: Original length of the 802.11 + * packet, may be bigger than the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211 + * attribute if the packet was truncated somewhere. + * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023: For wakeup reporting only, contains the + * 802.11 packet that caused the wakeup, e.g. a magic packet. The frame may + * be truncated, the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN attribute + * contains the original length. + * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN: Original length of the 802.3 + * packet, may be bigger than the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023 + * attribute if the packet was truncated somewhere. * @NUM_NL80211_WOWLAN_TRIG: number of wake on wireless triggers * @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number + * + * These nested attributes are used to configure the wakeup triggers and + * to report the wakeup reason(s). */ enum nl80211_wowlan_triggers { __NL80211_WOWLAN_TRIG_INVALID, @@ -2971,6 +2998,10 @@ enum nl80211_wowlan_triggers { NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST, NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE, NL80211_WOWLAN_TRIG_RFKILL_RELEASE, + NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211, + NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN, + NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023, + NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN, /* keep last */ NUM_NL80211_WOWLAN_TRIG, diff --git a/net/mac80211/pm.c b/net/mac80211/pm.c index e45b83610e85..53801d20176d 100644 --- a/net/mac80211/pm.c +++ b/net/mac80211/pm.c @@ -228,3 +228,13 @@ int __ieee80211_suspend(struct ieee80211_hw *hw, struct cfg80211_wowlan *wowlan) * ieee80211_reconfig(), which is also needed for hardware * hang/firmware failure/etc. recovery. */ + +void ieee80211_report_wowlan_wakeup(struct ieee80211_vif *vif, + struct cfg80211_wowlan_wakeup *wakeup, + gfp_t gfp) +{ + struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); + + cfg80211_report_wowlan_wakeup(&sdata->wdev, wakeup, gfp); +} +EXPORT_SYMBOL(ieee80211_report_wowlan_wakeup); diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index b5978ab4ad7a..d359734b6972 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -9323,6 +9323,103 @@ void cfg80211_report_obss_beacon(struct wiphy *wiphy, } EXPORT_SYMBOL(cfg80211_report_obss_beacon); +#ifdef CONFIG_PM +void cfg80211_report_wowlan_wakeup(struct wireless_dev *wdev, + struct cfg80211_wowlan_wakeup *wakeup, + gfp_t gfp) +{ + struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy); + struct sk_buff *msg; + void *hdr; + int err, size = 200; + + trace_cfg80211_report_wowlan_wakeup(wdev->wiphy, wdev, wakeup); + + if (wakeup) + size += wakeup->packet_present_len; + + msg = nlmsg_new(size, gfp); + if (!msg) + return; + + hdr = nl80211hdr_put(msg, 0, 0, 0, NL80211_CMD_SET_WOWLAN); + if (!hdr) + goto free_msg; + + if (nla_put_u32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx) || + nla_put_u64(msg, NL80211_ATTR_WDEV, wdev_id(wdev))) + goto free_msg; + + if (wdev->netdev && nla_put_u32(msg, NL80211_ATTR_IFINDEX, + wdev->netdev->ifindex)) + goto free_msg; + + if (wakeup) { + struct nlattr *reasons; + + reasons = nla_nest_start(msg, NL80211_ATTR_WOWLAN_TRIGGERS); + + if (wakeup->disconnect && + nla_put_flag(msg, NL80211_WOWLAN_TRIG_DISCONNECT)) + goto free_msg; + if (wakeup->magic_pkt && + nla_put_flag(msg, NL80211_WOWLAN_TRIG_MAGIC_PKT)) + goto free_msg; + if (wakeup->gtk_rekey_failure && + nla_put_flag(msg, NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE)) + goto free_msg; + if (wakeup->eap_identity_req && + nla_put_flag(msg, NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST)) + goto free_msg; + if (wakeup->four_way_handshake && + nla_put_flag(msg, NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE)) + goto free_msg; + if (wakeup->rfkill_release && + nla_put_flag(msg, NL80211_WOWLAN_TRIG_RFKILL_RELEASE)) + goto free_msg; + + if (wakeup->pattern_idx >= 0 && + nla_put_u32(msg, NL80211_WOWLAN_TRIG_PKT_PATTERN, + wakeup->pattern_idx)) + goto free_msg; + + if (wakeup->packet) { + u32 pkt_attr = NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211; + u32 len_attr = NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN; + + if (!wakeup->packet_80211) { + pkt_attr = + NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023; + len_attr = + NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN; + } + + if (wakeup->packet_len && + nla_put_u32(msg, len_attr, wakeup->packet_len)) + goto free_msg; + + if (nla_put(msg, pkt_attr, wakeup->packet_present_len, + wakeup->packet)) + goto free_msg; + } + + nla_nest_end(msg, reasons); + } + + err = genlmsg_end(msg, hdr); + if (err < 0) + goto free_msg; + + genlmsg_multicast_netns(wiphy_net(&rdev->wiphy), msg, 0, + nl80211_mlme_mcgrp.id, gfp); + return; + + free_msg: + nlmsg_free(msg); +} +EXPORT_SYMBOL(cfg80211_report_wowlan_wakeup); +#endif + void cfg80211_tdls_oper_request(struct net_device *dev, const u8 *peer, enum nl80211_tdls_operation oper, u16 reason_code, gfp_t gfp) diff --git a/net/wireless/trace.h b/net/wireless/trace.h index 8bc553199686..c9cafb0ea95f 100644 --- a/net/wireless/trace.h +++ b/net/wireless/trace.h @@ -2333,6 +2333,41 @@ TRACE_EVENT(cfg80211_return_u32, TP_printk("ret: %u", __entry->ret) ); +TRACE_EVENT(cfg80211_report_wowlan_wakeup, + TP_PROTO(struct wiphy *wiphy, struct wireless_dev *wdev, + struct cfg80211_wowlan_wakeup *wakeup), + TP_ARGS(wiphy, wdev, wakeup), + TP_STRUCT__entry( + WIPHY_ENTRY + WDEV_ENTRY + __field(bool, disconnect) + __field(bool, magic_pkt) + __field(bool, gtk_rekey_failure) + __field(bool, eap_identity_req) + __field(bool, four_way_handshake) + __field(bool, rfkill_release) + __field(s32, pattern_idx) + __field(u32, packet_len) + __dynamic_array(u8, packet, wakeup->packet_present_len) + ), + TP_fast_assign( + WIPHY_ASSIGN; + WDEV_ASSIGN; + __entry->disconnect = wakeup->disconnect; + __entry->magic_pkt = wakeup->magic_pkt; + __entry->gtk_rekey_failure = wakeup->gtk_rekey_failure; + __entry->eap_identity_req = wakeup->eap_identity_req; + __entry->four_way_handshake = wakeup->four_way_handshake; + __entry->rfkill_release = wakeup->rfkill_release; + __entry->pattern_idx = wakeup->pattern_idx; + __entry->packet_len = wakeup->packet_len; + if (wakeup->packet && wakeup->packet_present_len) + memcpy(__get_dynamic_array(packet), wakeup->packet, + wakeup->packet_present_len); + ), + TP_printk(WIPHY_PR_FMT ", " WDEV_PR_FMT, WIPHY_PR_ARG, WDEV_PR_ARG) +); + #endif /* !__RDEV_OPS_TRACE || TRACE_HEADER_MULTI_READ */ #undef TRACE_INCLUDE_PATH From fdcb786930777231c81f487ab2526d33971a3438 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 25 Jan 2013 00:44:12 +0100 Subject: [PATCH 017/209] mac80211: remove assoc data "sent_assoc" The field is never used, so remove it. Signed-off-by: Johannes Berg --- net/mac80211/ieee80211_i.h | 1 - net/mac80211/mlme.c | 3 --- 2 files changed, 4 deletions(-) diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 5fba867d9e2e..2f50be7eea09 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -400,7 +400,6 @@ struct ieee80211_mgd_assoc_data { u8 supp_rates_len; bool wmm, uapsd; bool have_beacon; - bool sent_assoc; bool synced; u8 ap_ht_param; diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 5913fb924b12..d79b9cd72fc5 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -2555,7 +2555,6 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems); ifmgd->assoc_data->have_beacon = true; - ifmgd->assoc_data->sent_assoc = false; /* continue assoc process */ ifmgd->assoc_data->timeout = jiffies; run_again(ifmgd, ifmgd->assoc_data->timeout); @@ -3967,13 +3966,11 @@ int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata, ifmgd->dtim_period = tim->dtim_period; } assoc_data->have_beacon = true; - assoc_data->sent_assoc = false; assoc_data->timeout = jiffies; } rcu_read_unlock(); } else { assoc_data->have_beacon = true; - assoc_data->sent_assoc = false; assoc_data->timeout = jiffies; } run_again(ifmgd, assoc_data->timeout); From c65dd1477b6fe5971489dd8b6e28a07ec277fdd6 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Wed, 12 Dec 2012 10:12:24 +0200 Subject: [PATCH 018/209] mac80211: inform the driver about update of dtim_period Currently, when the driver requires the DTIM period, mac80211 will wait to hear a beacon before association. This behavior is suboptimal since some drivers may be able to deal with knowing the DTIM period after the association, if they get it at all. To address this, notify the drivers with bss_info_changed with the new BSS_CHANGED_DTIM_PERIOD flag when the DTIM becomes known. This might be when changing to associated, or later when the entire association was done with only probe response information. Rename the hardware flag for the current behaviour to IEEE80211_HW_NEED_DTIM_BEFORE_ASSOC to more accurately reflect its behaviour. IEEE80211_HW_NEED_DTIM_PERIOD is no longer accurate as all drivers get the DTIM period now, just not before association. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/ath/carl9170/main.c | 2 +- drivers/net/wireless/iwlegacy/4965-mac.c | 2 +- drivers/net/wireless/iwlwifi/dvm/mac80211.c | 2 +- include/net/mac80211.h | 16 +++-- net/mac80211/debugfs.c | 4 +- net/mac80211/ieee80211_i.h | 2 +- net/mac80211/mlme.c | 74 ++++++++++++--------- net/mac80211/util.c | 4 ++ 8 files changed, 63 insertions(+), 43 deletions(-) diff --git a/drivers/net/wireless/ath/carl9170/main.c b/drivers/net/wireless/ath/carl9170/main.c index ef82751722e0..f293b3ff4756 100644 --- a/drivers/net/wireless/ath/carl9170/main.c +++ b/drivers/net/wireless/ath/carl9170/main.c @@ -1853,7 +1853,7 @@ void *carl9170_alloc(size_t priv_size) IEEE80211_HW_REPORTS_TX_ACK_STATUS | IEEE80211_HW_SUPPORTS_PS | IEEE80211_HW_PS_NULLFUNC_STACK | - IEEE80211_HW_NEED_DTIM_PERIOD | + IEEE80211_HW_NEED_DTIM_BEFORE_ASSOC | IEEE80211_HW_SIGNAL_DBM; if (!modparam_noht) { diff --git a/drivers/net/wireless/iwlegacy/4965-mac.c b/drivers/net/wireless/iwlegacy/4965-mac.c index f1dc04006564..d3cc776d2d34 100644 --- a/drivers/net/wireless/iwlegacy/4965-mac.c +++ b/drivers/net/wireless/iwlegacy/4965-mac.c @@ -5711,7 +5711,7 @@ il4965_mac_setup_register(struct il_priv *il, u32 max_probe_length) /* Tell mac80211 our characteristics */ hw->flags = IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_AMPDU_AGGREGATION | - IEEE80211_HW_NEED_DTIM_PERIOD | IEEE80211_HW_SPECTRUM_MGMT | + IEEE80211_HW_NEED_DTIM_BEFORE_ASSOC | IEEE80211_HW_SPECTRUM_MGMT | IEEE80211_HW_REPORTS_TX_ACK_STATUS | IEEE80211_HW_SUPPORTS_PS | IEEE80211_HW_SUPPORTS_DYNAMIC_PS; if (il->cfg->sku & IL_SKU_N) diff --git a/drivers/net/wireless/iwlwifi/dvm/mac80211.c b/drivers/net/wireless/iwlwifi/dvm/mac80211.c index fa43c0d6abe2..8e5c5c5ce06f 100644 --- a/drivers/net/wireless/iwlwifi/dvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/dvm/mac80211.c @@ -145,7 +145,7 @@ int iwlagn_mac_setup_register(struct iwl_priv *priv, /* Tell mac80211 our characteristics */ hw->flags = IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_AMPDU_AGGREGATION | - IEEE80211_HW_NEED_DTIM_PERIOD | + IEEE80211_HW_NEED_DTIM_BEFORE_ASSOC | IEEE80211_HW_SPECTRUM_MGMT | IEEE80211_HW_REPORTS_TX_ACK_STATUS | IEEE80211_HW_QUEUE_CONTROL | diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 7a27e00c513a..398b6ca4a9c5 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -208,6 +208,8 @@ struct ieee80211_chanctx_conf { * @BSS_CHANGED_TXPOWER: TX power setting changed for this interface * @BSS_CHANGED_P2P_PS: P2P powersave settings (CTWindow, opportunistic PS) * changed (currently only in P2P client mode, GO mode will be later) + * @BSS_CHANGED_DTIM_PERIOD: the DTIM period value was changed (set when + * it becomes valid, managed mode only) */ enum ieee80211_bss_change { BSS_CHANGED_ASSOC = 1<<0, @@ -230,6 +232,7 @@ enum ieee80211_bss_change { BSS_CHANGED_PS = 1<<17, BSS_CHANGED_TXPOWER = 1<<18, BSS_CHANGED_P2P_PS = 1<<19, + BSS_CHANGED_DTIM_PERIOD = 1<<20, /* when adding here, make sure to change ieee80211_reconfig */ }; @@ -271,9 +274,8 @@ enum ieee80211_rssi_event { * if the hardware cannot handle this it must set the * IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE hardware flag * @dtim_period: num of beacons before the next DTIM, for beaconing, - * valid in station mode only while @assoc is true and if also - * requested by %IEEE80211_HW_NEED_DTIM_PERIOD (cf. also hw conf - * @ps_dtim_period) + * valid in station mode only if after the driver was notified + * with the %BSS_CHANGED_DTIM_PERIOD flag, will be non-zero then. * @sync_tsf: last beacon's/probe response's TSF timestamp (could be old * as it may have been received during scanning long ago) * @sync_device_ts: the device timestamp corresponding to the sync_tsf, @@ -1328,9 +1330,9 @@ struct ieee80211_tx_control { * When this flag is set, signaling beacon-loss will cause an immediate * change to disassociated state. * - * @IEEE80211_HW_NEED_DTIM_PERIOD: - * This device needs to know the DTIM period for the BSS before - * associating. + * @IEEE80211_HW_NEED_DTIM_BEFORE_ASSOC: + * This device needs to get data from beacon before association (i.e. + * dtim_period). * * @IEEE80211_HW_SUPPORTS_PER_STA_GTK: The device's crypto engine supports * per-station GTKs as used by IBSS RSN or during fast transition. If @@ -1375,7 +1377,7 @@ enum ieee80211_hw_flags { IEEE80211_HW_2GHZ_SHORT_PREAMBLE_INCAPABLE = 1<<4, IEEE80211_HW_SIGNAL_UNSPEC = 1<<5, IEEE80211_HW_SIGNAL_DBM = 1<<6, - IEEE80211_HW_NEED_DTIM_PERIOD = 1<<7, + IEEE80211_HW_NEED_DTIM_BEFORE_ASSOC = 1<<7, IEEE80211_HW_SPECTRUM_MGMT = 1<<8, IEEE80211_HW_AMPDU_AGGREGATION = 1<<9, IEEE80211_HW_SUPPORTS_PS = 1<<10, diff --git a/net/mac80211/debugfs.c b/net/mac80211/debugfs.c index 466f4b45dd94..8e6040998ba6 100644 --- a/net/mac80211/debugfs.c +++ b/net/mac80211/debugfs.c @@ -121,8 +121,8 @@ static ssize_t hwflags_read(struct file *file, char __user *user_buf, sf += snprintf(buf + sf, mxln - sf, "SIGNAL_UNSPEC\n"); if (local->hw.flags & IEEE80211_HW_SIGNAL_DBM) sf += snprintf(buf + sf, mxln - sf, "SIGNAL_DBM\n"); - if (local->hw.flags & IEEE80211_HW_NEED_DTIM_PERIOD) - sf += snprintf(buf + sf, mxln - sf, "NEED_DTIM_PERIOD\n"); + if (local->hw.flags & IEEE80211_HW_NEED_DTIM_BEFORE_ASSOC) + sf += snprintf(buf + sf, mxln - sf, "NEED_DTIM_BEFORE_ASSOC\n"); if (local->hw.flags & IEEE80211_HW_SPECTRUM_MGMT) sf += snprintf(buf + sf, mxln - sf, "SPECTRUM_MGMT\n"); if (local->hw.flags & IEEE80211_HW_AMPDU_AGGREGATION) diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 2f50be7eea09..5ce0b6b6e182 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -399,7 +399,7 @@ struct ieee80211_mgd_assoc_data { u8 ssid_len; u8 supp_rates_len; bool wmm, uapsd; - bool have_beacon; + bool have_beacon, need_beacon; bool synced; u8 ap_ht_param; diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index d79b9cd72fc5..a5dba67bbe0b 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1445,7 +1445,7 @@ static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata, ieee80211_led_assoc(local, 1); - if (local->hw.flags & IEEE80211_HW_NEED_DTIM_PERIOD) { + if (sdata->u.mgd.assoc_data->have_beacon) { /* * If the AP is buggy we may get here with no DTIM period * known, so assume it's 1 which is the only safe assumption @@ -1453,6 +1453,7 @@ static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata, * probably just won't work at all. */ bss_conf->dtim_period = sdata->u.mgd.dtim_period ?: 1; + bss_info_changed |= BSS_CHANGED_DTIM_PERIOD; } else { bss_conf->dtim_period = 0; } @@ -2548,13 +2549,14 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, chan = chanctx_conf->def.chan; rcu_read_unlock(); - if (ifmgd->assoc_data && !ifmgd->assoc_data->have_beacon && + if (ifmgd->assoc_data && ifmgd->assoc_data->need_beacon && ether_addr_equal(mgmt->bssid, ifmgd->assoc_data->bss->bssid)) { ieee802_11_parse_elems(mgmt->u.beacon.variable, len - baselen, &elems); ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems); ifmgd->assoc_data->have_beacon = true; + ifmgd->assoc_data->need_beacon = false; /* continue assoc process */ ifmgd->assoc_data->timeout = jiffies; run_again(ifmgd, ifmgd->assoc_data->timeout); @@ -2711,6 +2713,19 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, elems.wmm_param_len)) changed |= BSS_CHANGED_QOS; + /* + * If we haven't had a beacon before, tell the driver about the + * DTIM period now. + */ + if (!bss_conf->dtim_period) { + /* a few bogus AP send dtim_period = 0 or no TIM IE */ + if (elems.tim) + bss_conf->dtim_period = elems.tim->dtim_period ?: 1; + else + bss_conf->dtim_period = 1; + changed |= BSS_CHANGED_DTIM_PERIOD; + } + if (elems.erp_info && elems.erp_info_len >= 1) { erp_valid = true; erp_value = elems.erp_info[0]; @@ -2989,7 +3004,8 @@ void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata) if (ifmgd->assoc_data && time_after(jiffies, ifmgd->assoc_data->timeout)) { - if (!ifmgd->assoc_data->have_beacon || + if ((ifmgd->assoc_data->need_beacon && + !ifmgd->assoc_data->have_beacon) || ieee80211_do_assoc(sdata)) { u8 bssid[ETH_ALEN]; @@ -3776,6 +3792,7 @@ int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata, struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; struct ieee80211_bss *bss = (void *)req->bss->priv; struct ieee80211_mgd_assoc_data *assoc_data; + const struct cfg80211_bss_ies *beacon_ies; struct ieee80211_supported_band *sband; const u8 *ssidie, *ht_ie, *vht_ie; int i, err; @@ -3941,38 +3958,35 @@ int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata, if (err) goto err_clear; - if (sdata->local->hw.flags & IEEE80211_HW_NEED_DTIM_PERIOD) { - const struct cfg80211_bss_ies *beacon_ies; + rcu_read_lock(); + beacon_ies = rcu_dereference(req->bss->beacon_ies); - rcu_read_lock(); - beacon_ies = rcu_dereference(req->bss->beacon_ies); - if (!beacon_ies) { - /* - * Wait up to one beacon interval ... - * should this be more if we miss one? - */ - sdata_info(sdata, "waiting for beacon from %pM\n", - ifmgd->bssid); - assoc_data->timeout = - TU_TO_EXP_TIME(req->bss->beacon_interval); - } else { - const u8 *tim_ie = cfg80211_find_ie(WLAN_EID_TIM, - beacon_ies->data, - beacon_ies->len); - if (tim_ie && tim_ie[1] >= - sizeof(struct ieee80211_tim_ie)) { - const struct ieee80211_tim_ie *tim; - tim = (void *)(tim_ie + 2); - ifmgd->dtim_period = tim->dtim_period; - } - assoc_data->have_beacon = true; - assoc_data->timeout = jiffies; + if (sdata->local->hw.flags & IEEE80211_HW_NEED_DTIM_BEFORE_ASSOC && + !beacon_ies) { + /* + * Wait up to one beacon interval ... + * should this be more if we miss one? + */ + sdata_info(sdata, "waiting for beacon from %pM\n", + ifmgd->bssid); + assoc_data->timeout = TU_TO_EXP_TIME(req->bss->beacon_interval); + assoc_data->need_beacon = true; + } else if (beacon_ies) { + const u8 *tim_ie = cfg80211_find_ie(WLAN_EID_TIM, + beacon_ies->data, + beacon_ies->len); + if (tim_ie && tim_ie[1] >= sizeof(struct ieee80211_tim_ie)) { + const struct ieee80211_tim_ie *tim; + tim = (void *)(tim_ie + 2); + ifmgd->dtim_period = tim->dtim_period; } - rcu_read_unlock(); - } else { assoc_data->have_beacon = true; assoc_data->timeout = jiffies; + } else { + assoc_data->timeout = jiffies; } + rcu_read_unlock(); + run_again(ifmgd, assoc_data->timeout); if (bss->corrupt_data) { diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 7519018ff71a..1c74512697f0 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -1538,6 +1538,10 @@ int ieee80211_reconfig(struct ieee80211_local *local) changed |= BSS_CHANGED_ASSOC | BSS_CHANGED_ARP_FILTER | BSS_CHANGED_PS; + + if (sdata->u.mgd.dtim_period) + changed |= BSS_CHANGED_DTIM_PERIOD; + mutex_lock(&sdata->u.mgd.mtx); ieee80211_bss_info_change_notify(sdata, changed); mutex_unlock(&sdata->u.mgd.mtx); From ce9877c0cd68f52e1818f0e175fc7b2f85b0e655 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 29 Jan 2013 22:33:30 +0100 Subject: [PATCH 019/209] mac80211: remove last_probe_resp from bss We track this, but never use it, so we can just remove it. Signed-off-by: Johannes Berg --- net/mac80211/ieee80211_i.h | 2 -- net/mac80211/scan.c | 3 --- 2 files changed, 5 deletions(-) diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 5ce0b6b6e182..12666c2ed49e 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -95,8 +95,6 @@ struct ieee80211_bss { bool wmm_used; bool uapsd_supported; - unsigned long last_probe_resp; - #ifdef CONFIG_MAC80211_MESH u8 *mesh_id; size_t mesh_id_len; diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index 607684c47d55..f69a1b9cb131 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -146,9 +146,6 @@ ieee80211_bss_info_update(struct ieee80211_local *local, bss->valid_data |= IEEE80211_BSS_VALID_WMM; } - if (!beacon) - bss->last_probe_resp = jiffies; - return bss; } From 0fe20add2c4b768ba8432ed15635caa46417ede7 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 29 Jan 2013 22:37:04 +0100 Subject: [PATCH 020/209] mac80211: remove unused mesh data from bss These pointers/values are never used, remove them. Signed-off-by: Johannes Berg --- net/mac80211/ieee80211_i.h | 31 ------------------------------- net/mac80211/scan.c | 9 --------- 2 files changed, 40 deletions(-) diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 12666c2ed49e..e4ee16839c6d 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -95,12 +95,6 @@ struct ieee80211_bss { bool wmm_used; bool uapsd_supported; -#ifdef CONFIG_MAC80211_MESH - u8 *mesh_id; - size_t mesh_id_len; - u8 *mesh_cfg; -#endif - #define IEEE80211_MAX_SUPP_RATES 32 u8 supp_rates[IEEE80211_MAX_SUPP_RATES]; size_t supp_rates_len; @@ -151,31 +145,6 @@ enum ieee80211_bss_valid_data_flags { IEEE80211_BSS_VALID_ERP = BIT(3) }; -static inline u8 *bss_mesh_cfg(struct ieee80211_bss *bss) -{ -#ifdef CONFIG_MAC80211_MESH - return bss->mesh_cfg; -#endif - return NULL; -} - -static inline u8 *bss_mesh_id(struct ieee80211_bss *bss) -{ -#ifdef CONFIG_MAC80211_MESH - return bss->mesh_id; -#endif - return NULL; -} - -static inline u8 bss_mesh_id_len(struct ieee80211_bss *bss) -{ -#ifdef CONFIG_MAC80211_MESH - return bss->mesh_id_len; -#endif - return 0; -} - - typedef unsigned __bitwise__ ieee80211_tx_result; #define TX_CONTINUE ((__force ieee80211_tx_result) 0u) #define TX_DROP ((__force ieee80211_tx_result) 1u) diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index f69a1b9cb131..061595ae513b 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -29,14 +29,6 @@ #define IEEE80211_CHANNEL_TIME (HZ / 33) #define IEEE80211_PASSIVE_CHANNEL_TIME (HZ / 8) -static void ieee80211_rx_bss_free(struct cfg80211_bss *cbss) -{ - struct ieee80211_bss *bss = (void *)cbss->priv; - - kfree(bss_mesh_id(bss)); - kfree(bss_mesh_cfg(bss)); -} - void ieee80211_rx_bss_put(struct ieee80211_local *local, struct ieee80211_bss *bss) { @@ -85,7 +77,6 @@ ieee80211_bss_info_update(struct ieee80211_local *local, if (!cbss) return NULL; - cbss->free_priv = ieee80211_rx_bss_free; bss = (void *)cbss->priv; bss->device_ts = rx_status->device_timestamp; From 3ff9a827c683353b9826ef57366b0f313acc21b0 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 29 Jan 2013 22:37:48 +0100 Subject: [PATCH 021/209] cfg80211: remove free_priv BSS API Now that mac80211 no longer uses this API, remove it completely. If anyone needs it again, we can revert this patch of course, but mac80211 was the only user right now. Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 3 --- net/wireless/scan.c | 3 --- 2 files changed, 6 deletions(-) diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 48add7e3ba1d..63599ab6005b 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1289,7 +1289,6 @@ struct cfg80211_bss_ies { * @beacon_ies: the information elements from the last Beacon frame * @proberesp_ies: the information elements from the last Probe Response frame * @signal: signal strength value (type depends on the wiphy's signal_type) - * @free_priv: function pointer to free private data * @priv: private area for driver use, has at least wiphy->bss_priv_size bytes */ struct cfg80211_bss { @@ -1301,8 +1300,6 @@ struct cfg80211_bss { const struct cfg80211_bss_ies __rcu *beacon_ies; const struct cfg80211_bss_ies __rcu *proberesp_ies; - void (*free_priv)(struct cfg80211_bss *bss); - s32 signal; u16 beacon_interval; diff --git a/net/wireless/scan.c b/net/wireless/scan.c index 01592d7d4789..ca367c58a3e2 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -31,9 +31,6 @@ static void bss_release(struct kref *ref) if (WARN_ON(atomic_read(&bss->hold))) return; - if (bss->pub.free_priv) - bss->pub.free_priv(&bss->pub); - ies = (void *)rcu_access_pointer(bss->pub.beacon_ies); if (ies) kfree_rcu(ies, rcu_head); From 1672c0e31917f49d31d30d79067103432bc20cc7 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 29 Jan 2013 15:02:27 +0100 Subject: [PATCH 022/209] mac80211: start auth/assoc timeout on frame status When sending authentication/association frames they might take a bit of time to go out because we may have to synchronise with the AP, in particular in the case where it's really a P2P GO. In this case the 200ms fixed timeout could potentially be too short if the beacon interval is relatively large. For drivers that report TX status we can do better. Instead of starting the timeout directly, start it only when the frame status arrives. Since then the frame was out on the air, we can wait shorter (the typical response time is supposed to be 30ms, wait 100ms.) Also, if the frame failed to be transmitted try again right away instead of waiting. Signed-off-by: Johannes Berg --- include/net/mac80211.h | 5 ++- net/mac80211/ibss.c | 4 +- net/mac80211/ieee80211_i.h | 11 ++++- net/mac80211/mlme.c | 85 ++++++++++++++++++++++++++++++++------ net/mac80211/scan.c | 3 +- net/mac80211/status.c | 12 ++++-- net/mac80211/util.c | 12 +++--- 7 files changed, 103 insertions(+), 29 deletions(-) diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 398b6ca4a9c5..164fd4b6503c 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -408,6 +408,9 @@ struct ieee80211_bss_conf { * @IEEE80211_TX_INTFL_RETRANSMISSION: This frame is being retransmitted * after TX status because the destination was asleep, it must not * be modified again (no seqno assignment, crypto, etc.) + * @IEEE80211_TX_INTFL_MLME_CONN_TX: This frame was transmitted by the MLME + * code for connection establishment, this indicates that its status + * should kick the MLME state machine. * @IEEE80211_TX_INTFL_NL80211_FRAME_TX: Frame was requested through nl80211 * MLME command (internal to mac80211 to figure out whether to send TX * status to user space) @@ -459,7 +462,7 @@ enum mac80211_tx_control_flags { IEEE80211_TX_CTL_NO_PS_BUFFER = BIT(17), IEEE80211_TX_CTL_MORE_FRAMES = BIT(18), IEEE80211_TX_INTFL_RETRANSMISSION = BIT(19), - /* hole at 20, use later */ + IEEE80211_TX_INTFL_MLME_CONN_TX = BIT(20), IEEE80211_TX_INTFL_NL80211_FRAME_TX = BIT(21), IEEE80211_TX_CTL_LDPC = BIT(22), IEEE80211_TX_CTL_STBC = BIT(23) | BIT(24), diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index b4b866f41919..a54c8248e0e0 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -302,7 +302,7 @@ static struct sta_info *ieee80211_ibss_finish_sta(struct sta_info *sta, "TX Auth SA=%pM DA=%pM BSSID=%pM (auth_transaction=1)\n", sdata->vif.addr, addr, sdata->u.ibss.bssid); ieee80211_send_auth(sdata, 1, WLAN_AUTH_OPEN, 0, NULL, 0, - addr, sdata->u.ibss.bssid, NULL, 0, 0); + addr, sdata->u.ibss.bssid, NULL, 0, 0, 0); } return sta; } @@ -422,7 +422,7 @@ static void ieee80211_rx_mgmt_auth_ibss(struct ieee80211_sub_if_data *sdata, * has actually implemented this. */ ieee80211_send_auth(sdata, 2, WLAN_AUTH_OPEN, 0, NULL, 0, - mgmt->sa, sdata->u.ibss.bssid, NULL, 0, 0); + mgmt->sa, sdata->u.ibss.bssid, NULL, 0, 0, 0); } static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata, diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index e4ee16839c6d..c9c66dec170a 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -415,6 +415,10 @@ struct ieee80211_if_managed { bool beacon_crc_valid; u32 beacon_crc; + bool status_acked; + bool status_received; + __le16 status_fc; + enum { IEEE80211_MFP_DISABLED, IEEE80211_MFP_OPTIONAL, @@ -1284,6 +1288,8 @@ void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata, void ieee80211_sta_reset_beacon_monitor(struct ieee80211_sub_if_data *sdata); void ieee80211_sta_reset_conn_monitor(struct ieee80211_sub_if_data *sdata); void ieee80211_mgd_stop(struct ieee80211_sub_if_data *sdata); +void ieee80211_mgd_conn_tx_status(struct ieee80211_sub_if_data *sdata, + __le16 fc, bool acked); /* IBSS code */ void ieee80211_ibss_notify_scan_completed(struct ieee80211_local *local); @@ -1544,7 +1550,8 @@ static inline void ieee80211_add_pending_skbs(struct ieee80211_local *local, void ieee80211_send_auth(struct ieee80211_sub_if_data *sdata, u16 transaction, u16 auth_alg, u16 status, u8 *extra, size_t extra_len, const u8 *bssid, - const u8 *da, const u8 *key, u8 key_len, u8 key_idx); + const u8 *da, const u8 *key, u8 key_len, u8 key_idx, + u32 tx_flags); void ieee80211_send_deauth_disassoc(struct ieee80211_sub_if_data *sdata, const u8 *bssid, u16 stype, u16 reason, bool send_frame, u8 *frame_buf); @@ -1561,7 +1568,7 @@ struct sk_buff *ieee80211_build_probe_req(struct ieee80211_sub_if_data *sdata, void ieee80211_send_probe_req(struct ieee80211_sub_if_data *sdata, u8 *dst, const u8 *ssid, size_t ssid_len, const u8 *ie, size_t ie_len, - u32 ratemask, bool directed, bool no_cck, + u32 ratemask, bool directed, u32 tx_flags, struct ieee80211_channel *channel, bool scan); void ieee80211_sta_def_wmm_params(struct ieee80211_sub_if_data *sdata, diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index a5dba67bbe0b..4ff52d0aaf9c 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -30,11 +30,13 @@ #include "rate.h" #include "led.h" -#define IEEE80211_AUTH_TIMEOUT (HZ / 5) -#define IEEE80211_AUTH_MAX_TRIES 3 -#define IEEE80211_AUTH_WAIT_ASSOC (HZ * 5) -#define IEEE80211_ASSOC_TIMEOUT (HZ / 5) -#define IEEE80211_ASSOC_MAX_TRIES 3 +#define IEEE80211_AUTH_TIMEOUT (HZ / 5) +#define IEEE80211_AUTH_TIMEOUT_SHORT (HZ / 10) +#define IEEE80211_AUTH_MAX_TRIES 3 +#define IEEE80211_AUTH_WAIT_ASSOC (HZ * 5) +#define IEEE80211_ASSOC_TIMEOUT (HZ / 5) +#define IEEE80211_ASSOC_TIMEOUT_SHORT (HZ / 10) +#define IEEE80211_ASSOC_MAX_TRIES 3 static int max_nullfunc_tries = 2; module_param(max_nullfunc_tries, int, 0644); @@ -644,6 +646,9 @@ static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata) drv_mgd_prepare_tx(local, sdata); IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT; + if (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS) + IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS | + IEEE80211_TX_INTFL_MLME_CONN_TX; ieee80211_tx_skb(sdata, skb); } @@ -1707,7 +1712,7 @@ static void ieee80211_mgd_probe_ap_send(struct ieee80211_sub_if_data *sdata) ssid_len = ssid[1]; ieee80211_send_probe_req(sdata, dst, ssid + 2, ssid_len, NULL, - 0, (u32) -1, true, false, + 0, (u32) -1, true, 0, ifmgd->associated->channel, false); rcu_read_unlock(); } @@ -1937,9 +1942,11 @@ static void ieee80211_destroy_auth_data(struct ieee80211_sub_if_data *sdata, static void ieee80211_auth_challenge(struct ieee80211_sub_if_data *sdata, struct ieee80211_mgmt *mgmt, size_t len) { + struct ieee80211_local *local = sdata->local; struct ieee80211_mgd_auth_data *auth_data = sdata->u.mgd.auth_data; u8 *pos; struct ieee802_11_elems elems; + u32 tx_flags = 0; pos = mgmt->u.auth.variable; ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), &elems); @@ -1947,11 +1954,14 @@ static void ieee80211_auth_challenge(struct ieee80211_sub_if_data *sdata, return; auth_data->expected_transaction = 4; drv_mgd_prepare_tx(sdata->local, sdata); + if (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS) + tx_flags = IEEE80211_TX_CTL_REQ_TX_STATUS | + IEEE80211_TX_INTFL_MLME_CONN_TX; ieee80211_send_auth(sdata, 3, auth_data->algorithm, 0, elems.challenge - 2, elems.challenge_len + 2, auth_data->bss->bssid, auth_data->bss->bssid, auth_data->key, auth_data->key_len, - auth_data->key_idx); + auth_data->key_idx, tx_flags); } static enum rx_mgmt_action __must_check @@ -2869,12 +2879,17 @@ static int ieee80211_probe_auth(struct ieee80211_sub_if_data *sdata) struct ieee80211_local *local = sdata->local; struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; struct ieee80211_mgd_auth_data *auth_data = ifmgd->auth_data; + u32 tx_flags = 0; lockdep_assert_held(&ifmgd->mtx); if (WARN_ON_ONCE(!auth_data)) return -EINVAL; + if (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS) + tx_flags = IEEE80211_TX_CTL_REQ_TX_STATUS | + IEEE80211_TX_INTFL_MLME_CONN_TX; + auth_data->tries++; if (auth_data->tries > IEEE80211_AUTH_MAX_TRIES) { @@ -2911,7 +2926,8 @@ static int ieee80211_probe_auth(struct ieee80211_sub_if_data *sdata) ieee80211_send_auth(sdata, trans, auth_data->algorithm, status, auth_data->data, auth_data->data_len, auth_data->bss->bssid, - auth_data->bss->bssid, NULL, 0, 0); + auth_data->bss->bssid, NULL, 0, 0, + tx_flags); } else { const u8 *ssidie; @@ -2930,13 +2946,15 @@ static int ieee80211_probe_auth(struct ieee80211_sub_if_data *sdata) * will not answer to direct packet in unassociated state. */ ieee80211_send_probe_req(sdata, NULL, ssidie + 2, ssidie[1], - NULL, 0, (u32) -1, true, false, + NULL, 0, (u32) -1, true, tx_flags, auth_data->bss->channel, false); rcu_read_unlock(); } - auth_data->timeout = jiffies + IEEE80211_AUTH_TIMEOUT; - run_again(ifmgd, auth_data->timeout); + if (!(local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS)) { + auth_data->timeout = jiffies + IEEE80211_AUTH_TIMEOUT; + run_again(ifmgd, auth_data->timeout); + } return 0; } @@ -2967,12 +2985,26 @@ static int ieee80211_do_assoc(struct ieee80211_sub_if_data *sdata) IEEE80211_ASSOC_MAX_TRIES); ieee80211_send_assoc(sdata); - assoc_data->timeout = jiffies + IEEE80211_ASSOC_TIMEOUT; - run_again(&sdata->u.mgd, assoc_data->timeout); + if (!(local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS)) { + assoc_data->timeout = jiffies + IEEE80211_ASSOC_TIMEOUT; + run_again(&sdata->u.mgd, assoc_data->timeout); + } return 0; } +void ieee80211_mgd_conn_tx_status(struct ieee80211_sub_if_data *sdata, + __le16 fc, bool acked) +{ + struct ieee80211_local *local = sdata->local; + + sdata->u.mgd.status_fc = fc; + sdata->u.mgd.status_acked = acked; + sdata->u.mgd.status_received = true; + + ieee80211_queue_work(&local->hw, &sdata->work); +} + void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata) { struct ieee80211_local *local = sdata->local; @@ -2980,6 +3012,33 @@ void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata) mutex_lock(&ifmgd->mtx); + if (ifmgd->status_received) { + __le16 fc = ifmgd->status_fc; + bool status_acked = ifmgd->status_acked; + + ifmgd->status_received = false; + if (ifmgd->auth_data && + (ieee80211_is_probe_req(fc) || ieee80211_is_auth(fc))) { + if (status_acked) { + ifmgd->auth_data->timeout = + jiffies + IEEE80211_AUTH_TIMEOUT_SHORT; + run_again(ifmgd, ifmgd->auth_data->timeout); + } else { + ifmgd->auth_data->timeout = jiffies - 1; + } + } else if (ifmgd->assoc_data && + (ieee80211_is_assoc_req(fc) || + ieee80211_is_reassoc_req(fc))) { + if (status_acked) { + ifmgd->assoc_data->timeout = + jiffies + IEEE80211_ASSOC_TIMEOUT_SHORT; + run_again(ifmgd, ifmgd->assoc_data->timeout); + } else { + ifmgd->assoc_data->timeout = jiffies - 1; + } + } + } + if (ifmgd->auth_data && time_after(jiffies, ifmgd->auth_data->timeout)) { if (ifmgd->auth_data->done) { diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index 061595ae513b..85d0e5ee55a2 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -389,7 +389,8 @@ static void ieee80211_scan_state_send_probe(struct ieee80211_local *local, local->scan_req->ssids[i].ssid_len, local->scan_req->ie, local->scan_req->ie_len, local->scan_req->rates[band], false, - local->scan_req->no_cck, + local->scan_req->no_cck ? + IEEE80211_TX_CTL_NO_CCK_RATE : 0, local->hw.conf.channel, true); /* diff --git a/net/mac80211/status.c b/net/mac80211/status.c index ab50285fcbab..d041de056b7f 100644 --- a/net/mac80211/status.c +++ b/net/mac80211/status.c @@ -335,7 +335,8 @@ static void ieee80211_report_used_skb(struct ieee80211_local *local, if (dropped) acked = false; - if (info->flags & IEEE80211_TX_INTFL_NL80211_FRAME_TX) { + if (info->flags & (IEEE80211_TX_INTFL_NL80211_FRAME_TX | + IEEE80211_TX_INTFL_MLME_CONN_TX)) { struct ieee80211_sub_if_data *sdata = NULL; struct ieee80211_sub_if_data *iter_sdata; u64 cookie = (unsigned long)skb; @@ -357,10 +358,13 @@ static void ieee80211_report_used_skb(struct ieee80211_local *local, sdata = rcu_dereference(local->p2p_sdata); } - if (!sdata) + if (!sdata) { skb->dev = NULL; - else if (ieee80211_is_nullfunc(hdr->frame_control) || - ieee80211_is_qos_nullfunc(hdr->frame_control)) { + } else if (info->flags & IEEE80211_TX_INTFL_MLME_CONN_TX) { + ieee80211_mgd_conn_tx_status(sdata, hdr->frame_control, + acked); + } else if (ieee80211_is_nullfunc(hdr->frame_control) || + ieee80211_is_qos_nullfunc(hdr->frame_control)) { cfg80211_probe_status(sdata->dev, hdr->addr1, cookie, acked, GFP_ATOMIC); } else { diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 1c74512697f0..139ad9b66c39 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -1030,7 +1030,8 @@ u32 ieee80211_mandatory_rates(struct ieee80211_local *local, void ieee80211_send_auth(struct ieee80211_sub_if_data *sdata, u16 transaction, u16 auth_alg, u16 status, u8 *extra, size_t extra_len, const u8 *da, - const u8 *bssid, const u8 *key, u8 key_len, u8 key_idx) + const u8 *bssid, const u8 *key, u8 key_len, u8 key_idx, + u32 tx_flags) { struct ieee80211_local *local = sdata->local; struct sk_buff *skb; @@ -1063,7 +1064,8 @@ void ieee80211_send_auth(struct ieee80211_sub_if_data *sdata, WARN_ON(err); } - IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT; + IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT | + tx_flags; ieee80211_tx_skb(sdata, skb); } @@ -1277,7 +1279,7 @@ struct sk_buff *ieee80211_build_probe_req(struct ieee80211_sub_if_data *sdata, void ieee80211_send_probe_req(struct ieee80211_sub_if_data *sdata, u8 *dst, const u8 *ssid, size_t ssid_len, const u8 *ie, size_t ie_len, - u32 ratemask, bool directed, bool no_cck, + u32 ratemask, bool directed, u32 tx_flags, struct ieee80211_channel *channel, bool scan) { struct sk_buff *skb; @@ -1286,9 +1288,7 @@ void ieee80211_send_probe_req(struct ieee80211_sub_if_data *sdata, u8 *dst, ssid, ssid_len, ie, ie_len, directed); if (skb) { - if (no_cck) - IEEE80211_SKB_CB(skb)->flags |= - IEEE80211_TX_CTL_NO_CCK_RATE; + IEEE80211_SKB_CB(skb)->flags |= tx_flags; if (scan) ieee80211_tx_skb_tid_band(sdata, skb, 7, channel->band); else From 3f892b61a8cf6a85bc389c8d13209d686a4f6403 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Wed, 23 Jan 2013 12:32:45 +0100 Subject: [PATCH 023/209] mac80211: improve latency and throughput while software scanning Patch vastly improve latency while scanning. Slight throughput improvements were observed as well. Is intended for improve performance of voice and video applications, when scan is periodically requested by user space (i.e. default NetworkManager behaviour). Patch remove latency requirement based on PM_QOS_NETWORK_LATENCY, this value is 2000 seconds by default (i.e. approximately 0.5 hour !?!). Also remove listen interval requirement, which based on beaconing and depending on BSS parameters. It can make we stay off-channel for a second or more. Instead try to offer the best latency that we could, i.e. be off-channel no longer than PASSIVE channel scan time: 125 ms. That mean we will scan two ACTIVE channels and go back to on-channel, and one PASSIVE channel, and go back to on-channel. Patch also decrease PASSIVE channel scan time to about 110 ms. As drawback patch increase overall scan time. On my tests, when scanning both 2GHz and 5GHz bands, scanning time increase from 5 seconds up to 10 seconds. Since that increase happen only when we are associated, I think it can be acceptable. If eventually better scan time is needed for situations when we lose signal and quickly need to decide to which AP roam, additional scan flag or parameter can be introduced. I tested patch by doing: while true; do iw dev wlan0 scan; sleep 3; done > /dev/null and ping -i0.2 -c 1000 HOST on remote and local machine, results are as below: * Ping from local periodically scanning machine to AP: Unpatched: rtt min/avg/max/mdev = 0.928/24.946/182.135/36.873 ms Patched: rtt min/avg/max/mdev = 0.928/19.678/150.845/33.130 ms * Ping from remote machine to periodically scanning machine: Unpatched: rtt min/avg/max/mdev = 1.637/120.683/709.139/164.337 ms Patched: rtt min/avg/max/mdev = 1.807/26.893/201.435/40.284 ms Throughput measured by scp show following results. * Upload to periodically scanning machine: Unpatched: 3.9MB/s 03:15 Patched: 4.3MB/s 02:58 * Download from periodically scanning machine: Unpatched: 5.5MB/s 02:17 Patched: 6.2MB/s 02:02 Signed-off-by: Stanislaw Gruszka Signed-off-by: Johannes Berg --- net/mac80211/scan.c | 32 +++++--------------------------- 1 file changed, 5 insertions(+), 27 deletions(-) diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index 85d0e5ee55a2..7f80f0a5026e 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -27,7 +27,7 @@ #define IEEE80211_PROBE_DELAY (HZ / 33) #define IEEE80211_CHANNEL_TIME (HZ / 33) -#define IEEE80211_PASSIVE_CHANNEL_TIME (HZ / 8) +#define IEEE80211_PASSIVE_CHANNEL_TIME (HZ / 9) void ieee80211_rx_bss_put(struct ieee80211_local *local, struct ieee80211_bss *bss) @@ -535,8 +535,6 @@ static void ieee80211_scan_state_decision(struct ieee80211_local *local, bool associated = false; bool tx_empty = true; bool bad_latency; - bool listen_int_exceeded; - unsigned long min_beacon_int = 0; struct ieee80211_sub_if_data *sdata; struct ieee80211_channel *next_chan; enum mac80211_scan_state next_scan_state; @@ -555,11 +553,6 @@ static void ieee80211_scan_state_decision(struct ieee80211_local *local, if (sdata->u.mgd.associated) { associated = true; - if (sdata->vif.bss_conf.beacon_int < - min_beacon_int || min_beacon_int == 0) - min_beacon_int = - sdata->vif.bss_conf.beacon_int; - if (!qdisc_all_tx_empty(sdata->dev)) { tx_empty = false; break; @@ -576,34 +569,19 @@ static void ieee80211_scan_state_decision(struct ieee80211_local *local, * see if we can scan another channel without interfering * with the current traffic situation. * - * Since we don't know if the AP has pending frames for us - * we can only check for our tx queues and use the current - * pm_qos requirements for rx. Hence, if no tx traffic occurs - * at all we will scan as many channels in a row as the pm_qos - * latency allows us to. Additionally we also check for the - * currently negotiated listen interval to prevent losing - * frames unnecessarily. - * - * Otherwise switch back to the operating channel. + * Keep good latency, do not stay off-channel more than 125 ms. */ bad_latency = time_after(jiffies + - ieee80211_scan_get_channel_time(next_chan), - local->leave_oper_channel_time + - usecs_to_jiffies(pm_qos_request(PM_QOS_NETWORK_LATENCY))); - - listen_int_exceeded = time_after(jiffies + - ieee80211_scan_get_channel_time(next_chan), - local->leave_oper_channel_time + - usecs_to_jiffies(min_beacon_int * 1024) * - local->hw.conf.listen_interval); + ieee80211_scan_get_channel_time(next_chan), + local->leave_oper_channel_time + HZ / 8); if (associated && !tx_empty) { if (local->scan_req->flags & NL80211_SCAN_FLAG_LOW_PRIORITY) next_scan_state = SCAN_ABORT; else next_scan_state = SCAN_SUSPEND; - } else if (associated && (bad_latency || listen_int_exceeded)) { + } else if (associated && bad_latency) { next_scan_state = SCAN_SUSPEND; } else { next_scan_state = SCAN_SET_CHANNEL; From cfad1ba87150e198be9ea32367a24e500e59de2c Mon Sep 17 00:00:00 2001 From: Eric Lapuyade Date: Tue, 18 Dec 2012 14:53:53 +0100 Subject: [PATCH 024/209] NFC: Initial support for Inside Secure microread Inside Secure microread is an HCI based NFC chipset. This initial support includes reader and p2p (Target and initiator) modes. Signed-off-by: Eric Lapuyade Signed-off-by: Samuel Ortiz --- drivers/nfc/Kconfig | 1 + drivers/nfc/Makefile | 1 + drivers/nfc/microread/Kconfig | 13 + drivers/nfc/microread/Makefile | 5 + drivers/nfc/microread/microread.c | 728 ++++++++++++++++++++++++ drivers/nfc/microread/microread.h | 33 ++ include/linux/platform_data/microread.h | 35 ++ 7 files changed, 816 insertions(+) create mode 100644 drivers/nfc/microread/Kconfig create mode 100644 drivers/nfc/microread/Makefile create mode 100644 drivers/nfc/microread/microread.c create mode 100644 drivers/nfc/microread/microread.h create mode 100644 include/linux/platform_data/microread.h diff --git a/drivers/nfc/Kconfig b/drivers/nfc/Kconfig index 80c728b28828..e57034971ccc 100644 --- a/drivers/nfc/Kconfig +++ b/drivers/nfc/Kconfig @@ -27,5 +27,6 @@ config NFC_WILINK into the kernel or say M to compile it as module. source "drivers/nfc/pn544/Kconfig" +source "drivers/nfc/microread/Kconfig" endmenu diff --git a/drivers/nfc/Makefile b/drivers/nfc/Makefile index 574bbc04d97a..a189ada0926a 100644 --- a/drivers/nfc/Makefile +++ b/drivers/nfc/Makefile @@ -3,6 +3,7 @@ # obj-$(CONFIG_NFC_PN544) += pn544/ +obj-$(CONFIG_NFC_MICROREAD) += microread/ obj-$(CONFIG_NFC_PN533) += pn533.o obj-$(CONFIG_NFC_WILINK) += nfcwilink.o diff --git a/drivers/nfc/microread/Kconfig b/drivers/nfc/microread/Kconfig new file mode 100644 index 000000000000..5b89d011d098 --- /dev/null +++ b/drivers/nfc/microread/Kconfig @@ -0,0 +1,13 @@ +config NFC_MICROREAD + tristate "Inside Secure microread NFC driver" + depends on NFC_HCI + select CRC_CCITT + default n + ---help--- + This module contains the main code for Inside Secure microread + NFC chipsets. It implements the chipset HCI logic and hooks into + the NFC kernel APIs. Physical layers will register against it. + + To compile this driver as a module, choose m here. The module will + be called microread. + Say N if unsure. diff --git a/drivers/nfc/microread/Makefile b/drivers/nfc/microread/Makefile new file mode 100644 index 000000000000..9ce2c53f49a7 --- /dev/null +++ b/drivers/nfc/microread/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for Microread HCI based NFC driver +# + +obj-$(CONFIG_NFC_MICROREAD) += microread.o diff --git a/drivers/nfc/microread/microread.c b/drivers/nfc/microread/microread.c new file mode 100644 index 000000000000..3420d833db17 --- /dev/null +++ b/drivers/nfc/microread/microread.c @@ -0,0 +1,728 @@ +/* + * HCI based Driver for Inside Secure microread NFC Chip + * + * Copyright (C) 2013 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "microread.h" + +/* Proprietary gates, events, commands and registers */ +/* Admin */ +#define MICROREAD_GATE_ID_ADM NFC_HCI_ADMIN_GATE +#define MICROREAD_GATE_ID_MGT 0x01 +#define MICROREAD_GATE_ID_OS 0x02 +#define MICROREAD_GATE_ID_TESTRF 0x03 +#define MICROREAD_GATE_ID_LOOPBACK NFC_HCI_LOOPBACK_GATE +#define MICROREAD_GATE_ID_IDT NFC_HCI_ID_MGMT_GATE +#define MICROREAD_GATE_ID_LMS NFC_HCI_LINK_MGMT_GATE + +/* Reader */ +#define MICROREAD_GATE_ID_MREAD_GEN 0x10 +#define MICROREAD_GATE_ID_MREAD_ISO_B NFC_HCI_RF_READER_B_GATE +#define MICROREAD_GATE_ID_MREAD_NFC_T1 0x12 +#define MICROREAD_GATE_ID_MREAD_ISO_A NFC_HCI_RF_READER_A_GATE +#define MICROREAD_GATE_ID_MREAD_NFC_T3 0x14 +#define MICROREAD_GATE_ID_MREAD_ISO_15_3 0x15 +#define MICROREAD_GATE_ID_MREAD_ISO_15_2 0x16 +#define MICROREAD_GATE_ID_MREAD_ISO_B_3 0x17 +#define MICROREAD_GATE_ID_MREAD_BPRIME 0x18 +#define MICROREAD_GATE_ID_MREAD_ISO_A_3 0x19 + +/* Card */ +#define MICROREAD_GATE_ID_MCARD_GEN 0x20 +#define MICROREAD_GATE_ID_MCARD_ISO_B 0x21 +#define MICROREAD_GATE_ID_MCARD_BPRIME 0x22 +#define MICROREAD_GATE_ID_MCARD_ISO_A 0x23 +#define MICROREAD_GATE_ID_MCARD_NFC_T3 0x24 +#define MICROREAD_GATE_ID_MCARD_ISO_15_3 0x25 +#define MICROREAD_GATE_ID_MCARD_ISO_15_2 0x26 +#define MICROREAD_GATE_ID_MCARD_ISO_B_2 0x27 +#define MICROREAD_GATE_ID_MCARD_ISO_CUSTOM 0x28 +#define MICROREAD_GATE_ID_SECURE_ELEMENT 0x2F + +/* P2P */ +#define MICROREAD_GATE_ID_P2P_GEN 0x30 +#define MICROREAD_GATE_ID_P2P_TARGET 0x31 +#define MICROREAD_PAR_P2P_TARGET_MODE 0x01 +#define MICROREAD_PAR_P2P_TARGET_GT 0x04 +#define MICROREAD_GATE_ID_P2P_INITIATOR 0x32 +#define MICROREAD_PAR_P2P_INITIATOR_GI 0x01 +#define MICROREAD_PAR_P2P_INITIATOR_GT 0x03 + +/* Those pipes are created/opened by default in the chip */ +#define MICROREAD_PIPE_ID_LMS 0x00 +#define MICROREAD_PIPE_ID_ADMIN 0x01 +#define MICROREAD_PIPE_ID_MGT 0x02 +#define MICROREAD_PIPE_ID_OS 0x03 +#define MICROREAD_PIPE_ID_HDS_LOOPBACK 0x04 +#define MICROREAD_PIPE_ID_HDS_IDT 0x05 +#define MICROREAD_PIPE_ID_HDS_MCARD_ISO_B 0x08 +#define MICROREAD_PIPE_ID_HDS_MCARD_ISO_BPRIME 0x09 +#define MICROREAD_PIPE_ID_HDS_MCARD_ISO_A 0x0A +#define MICROREAD_PIPE_ID_HDS_MCARD_ISO_15_3 0x0B +#define MICROREAD_PIPE_ID_HDS_MCARD_ISO_15_2 0x0C +#define MICROREAD_PIPE_ID_HDS_MCARD_NFC_T3 0x0D +#define MICROREAD_PIPE_ID_HDS_MCARD_ISO_B_2 0x0E +#define MICROREAD_PIPE_ID_HDS_MCARD_CUSTOM 0x0F +#define MICROREAD_PIPE_ID_HDS_MREAD_ISO_B 0x10 +#define MICROREAD_PIPE_ID_HDS_MREAD_NFC_T1 0x11 +#define MICROREAD_PIPE_ID_HDS_MREAD_ISO_A 0x12 +#define MICROREAD_PIPE_ID_HDS_MREAD_ISO_15_3 0x13 +#define MICROREAD_PIPE_ID_HDS_MREAD_ISO_15_2 0x14 +#define MICROREAD_PIPE_ID_HDS_MREAD_NFC_T3 0x15 +#define MICROREAD_PIPE_ID_HDS_MREAD_ISO_B_3 0x16 +#define MICROREAD_PIPE_ID_HDS_MREAD_BPRIME 0x17 +#define MICROREAD_PIPE_ID_HDS_MREAD_ISO_A_3 0x18 +#define MICROREAD_PIPE_ID_HDS_MREAD_GEN 0x1B +#define MICROREAD_PIPE_ID_HDS_STACKED_ELEMENT 0x1C +#define MICROREAD_PIPE_ID_HDS_INSTANCES 0x1D +#define MICROREAD_PIPE_ID_HDS_TESTRF 0x1E +#define MICROREAD_PIPE_ID_HDS_P2P_TARGET 0x1F +#define MICROREAD_PIPE_ID_HDS_P2P_INITIATOR 0x20 + +/* Events */ +#define MICROREAD_EVT_MREAD_DISCOVERY_OCCURED NFC_HCI_EVT_TARGET_DISCOVERED +#define MICROREAD_EVT_MREAD_CARD_FOUND 0x3D +#define MICROREAD_EMCF_A_ATQA 0 +#define MICROREAD_EMCF_A_SAK 2 +#define MICROREAD_EMCF_A_LEN 3 +#define MICROREAD_EMCF_A_UID 4 +#define MICROREAD_EMCF_A3_ATQA 0 +#define MICROREAD_EMCF_A3_SAK 2 +#define MICROREAD_EMCF_A3_LEN 3 +#define MICROREAD_EMCF_A3_UID 4 +#define MICROREAD_EMCF_B_UID 0 +#define MICROREAD_EMCF_T1_ATQA 0 +#define MICROREAD_EMCF_T1_UID 4 +#define MICROREAD_EMCF_T3_UID 0 +#define MICROREAD_EVT_MREAD_DISCOVERY_START NFC_HCI_EVT_READER_REQUESTED +#define MICROREAD_EVT_MREAD_DISCOVERY_START_SOME 0x3E +#define MICROREAD_EVT_MREAD_DISCOVERY_STOP NFC_HCI_EVT_END_OPERATION +#define MICROREAD_EVT_MREAD_SIM_REQUESTS 0x3F +#define MICROREAD_EVT_MCARD_EXCHANGE NFC_HCI_EVT_TARGET_DISCOVERED +#define MICROREAD_EVT_P2P_INITIATOR_EXCHANGE_TO_RF 0x20 +#define MICROREAD_EVT_P2P_INITIATOR_EXCHANGE_FROM_RF 0x21 +#define MICROREAD_EVT_MCARD_FIELD_ON 0x11 +#define MICROREAD_EVT_P2P_TARGET_ACTIVATED 0x13 +#define MICROREAD_EVT_P2P_TARGET_DEACTIVATED 0x12 +#define MICROREAD_EVT_MCARD_FIELD_OFF 0x14 + +/* Commands */ +#define MICROREAD_CMD_MREAD_EXCHANGE 0x10 +#define MICROREAD_CMD_MREAD_SUBSCRIBE 0x3F + +/* Hosts IDs */ +#define MICROREAD_ELT_ID_HDS NFC_HCI_TERMINAL_HOST_ID +#define MICROREAD_ELT_ID_SIM NFC_HCI_UICC_HOST_ID +#define MICROREAD_ELT_ID_SE1 0x03 +#define MICROREAD_ELT_ID_SE2 0x04 +#define MICROREAD_ELT_ID_SE3 0x05 + +static struct nfc_hci_gate microread_gates[] = { + {MICROREAD_GATE_ID_ADM, MICROREAD_PIPE_ID_ADMIN}, + {MICROREAD_GATE_ID_LOOPBACK, MICROREAD_PIPE_ID_HDS_LOOPBACK}, + {MICROREAD_GATE_ID_IDT, MICROREAD_PIPE_ID_HDS_IDT}, + {MICROREAD_GATE_ID_LMS, MICROREAD_PIPE_ID_LMS}, + {MICROREAD_GATE_ID_MREAD_ISO_B, MICROREAD_PIPE_ID_HDS_MREAD_ISO_B}, + {MICROREAD_GATE_ID_MREAD_ISO_A, MICROREAD_PIPE_ID_HDS_MREAD_ISO_A}, + {MICROREAD_GATE_ID_MREAD_ISO_A_3, MICROREAD_PIPE_ID_HDS_MREAD_ISO_A_3}, + {MICROREAD_GATE_ID_MGT, MICROREAD_PIPE_ID_MGT}, + {MICROREAD_GATE_ID_OS, MICROREAD_PIPE_ID_OS}, + {MICROREAD_GATE_ID_MREAD_NFC_T1, MICROREAD_PIPE_ID_HDS_MREAD_NFC_T1}, + {MICROREAD_GATE_ID_MREAD_NFC_T3, MICROREAD_PIPE_ID_HDS_MREAD_NFC_T3}, + {MICROREAD_GATE_ID_P2P_TARGET, MICROREAD_PIPE_ID_HDS_P2P_TARGET}, + {MICROREAD_GATE_ID_P2P_INITIATOR, MICROREAD_PIPE_ID_HDS_P2P_INITIATOR} +}; + +/* Largest headroom needed for outgoing custom commands */ +#define MICROREAD_CMDS_HEADROOM 2 +#define MICROREAD_CMD_TAILROOM 2 + +struct microread_info { + struct nfc_phy_ops *phy_ops; + void *phy_id; + + struct nfc_hci_dev *hdev; + + int async_cb_type; + data_exchange_cb_t async_cb; + void *async_cb_context; +}; + +static int microread_open(struct nfc_hci_dev *hdev) +{ + struct microread_info *info = nfc_hci_get_clientdata(hdev); + + return info->phy_ops->enable(info->phy_id); +} + +static void microread_close(struct nfc_hci_dev *hdev) +{ + struct microread_info *info = nfc_hci_get_clientdata(hdev); + + info->phy_ops->disable(info->phy_id); +} + +static int microread_hci_ready(struct nfc_hci_dev *hdev) +{ + int r; + u8 param[4]; + + param[0] = 0x03; + r = nfc_hci_send_cmd(hdev, MICROREAD_GATE_ID_MREAD_ISO_A, + MICROREAD_CMD_MREAD_SUBSCRIBE, param, 1, NULL); + if (r) + return r; + + r = nfc_hci_send_cmd(hdev, MICROREAD_GATE_ID_MREAD_ISO_A_3, + MICROREAD_CMD_MREAD_SUBSCRIBE, NULL, 0, NULL); + if (r) + return r; + + param[0] = 0x00; + param[1] = 0x03; + param[2] = 0x00; + r = nfc_hci_send_cmd(hdev, MICROREAD_GATE_ID_MREAD_ISO_B, + MICROREAD_CMD_MREAD_SUBSCRIBE, param, 3, NULL); + if (r) + return r; + + r = nfc_hci_send_cmd(hdev, MICROREAD_GATE_ID_MREAD_NFC_T1, + MICROREAD_CMD_MREAD_SUBSCRIBE, NULL, 0, NULL); + if (r) + return r; + + param[0] = 0xFF; + param[1] = 0xFF; + param[2] = 0x00; + param[3] = 0x00; + r = nfc_hci_send_cmd(hdev, MICROREAD_GATE_ID_MREAD_NFC_T3, + MICROREAD_CMD_MREAD_SUBSCRIBE, param, 4, NULL); + + return r; +} + +static int microread_xmit(struct nfc_hci_dev *hdev, struct sk_buff *skb) +{ + struct microread_info *info = nfc_hci_get_clientdata(hdev); + + return info->phy_ops->write(info->phy_id, skb); +} + +static int microread_start_poll(struct nfc_hci_dev *hdev, + u32 im_protocols, u32 tm_protocols) +{ + int r; + + u8 param[2]; + u8 mode; + + param[0] = 0x00; + param[1] = 0x00; + + if (im_protocols & NFC_PROTO_ISO14443_MASK) + param[0] |= (1 << 2); + + if (im_protocols & NFC_PROTO_ISO14443_B_MASK) + param[0] |= 1; + + if (im_protocols & NFC_PROTO_MIFARE_MASK) + param[1] |= 1; + + if (im_protocols & NFC_PROTO_JEWEL_MASK) + param[0] |= (1 << 1); + + if (im_protocols & NFC_PROTO_FELICA_MASK) + param[0] |= (1 << 5); + + if (im_protocols & NFC_PROTO_NFC_DEP_MASK) + param[1] |= (1 << 1); + + if ((im_protocols | tm_protocols) & NFC_PROTO_NFC_DEP_MASK) { + hdev->gb = nfc_get_local_general_bytes(hdev->ndev, + &hdev->gb_len); + if (hdev->gb == NULL || hdev->gb_len == 0) { + im_protocols &= ~NFC_PROTO_NFC_DEP_MASK; + tm_protocols &= ~NFC_PROTO_NFC_DEP_MASK; + } + } + + r = nfc_hci_send_event(hdev, MICROREAD_GATE_ID_MREAD_ISO_A, + MICROREAD_EVT_MREAD_DISCOVERY_STOP, NULL, 0); + if (r) + return r; + + mode = 0xff; + r = nfc_hci_set_param(hdev, MICROREAD_GATE_ID_P2P_TARGET, + MICROREAD_PAR_P2P_TARGET_MODE, &mode, 1); + if (r) + return r; + + if (im_protocols & NFC_PROTO_NFC_DEP_MASK) { + r = nfc_hci_set_param(hdev, MICROREAD_GATE_ID_P2P_INITIATOR, + MICROREAD_PAR_P2P_INITIATOR_GI, + hdev->gb, hdev->gb_len); + if (r) + return r; + } + + if (tm_protocols & NFC_PROTO_NFC_DEP_MASK) { + r = nfc_hci_set_param(hdev, MICROREAD_GATE_ID_P2P_TARGET, + MICROREAD_PAR_P2P_TARGET_GT, + hdev->gb, hdev->gb_len); + if (r) + return r; + + mode = 0x02; + r = nfc_hci_set_param(hdev, MICROREAD_GATE_ID_P2P_TARGET, + MICROREAD_PAR_P2P_TARGET_MODE, &mode, 1); + if (r) + return r; + } + + return nfc_hci_send_event(hdev, MICROREAD_GATE_ID_MREAD_ISO_A, + MICROREAD_EVT_MREAD_DISCOVERY_START_SOME, + param, 2); +} + +static int microread_dep_link_up(struct nfc_hci_dev *hdev, + struct nfc_target *target, u8 comm_mode, + u8 *gb, size_t gb_len) +{ + struct sk_buff *rgb_skb = NULL; + int r; + + r = nfc_hci_get_param(hdev, target->hci_reader_gate, + MICROREAD_PAR_P2P_INITIATOR_GT, &rgb_skb); + if (r < 0) + return r; + + if (rgb_skb->len == 0 || rgb_skb->len > NFC_GB_MAXSIZE) { + r = -EPROTO; + goto exit; + } + + r = nfc_set_remote_general_bytes(hdev->ndev, rgb_skb->data, + rgb_skb->len); + if (r == 0) + r = nfc_dep_link_is_up(hdev->ndev, target->idx, comm_mode, + NFC_RF_INITIATOR); +exit: + kfree_skb(rgb_skb); + + return r; +} + +static int microread_dep_link_down(struct nfc_hci_dev *hdev) +{ + return nfc_hci_send_event(hdev, MICROREAD_GATE_ID_P2P_INITIATOR, + MICROREAD_EVT_MREAD_DISCOVERY_STOP, NULL, 0); +} + +static int microread_target_from_gate(struct nfc_hci_dev *hdev, u8 gate, + struct nfc_target *target) +{ + switch (gate) { + case MICROREAD_GATE_ID_P2P_INITIATOR: + target->supported_protocols = NFC_PROTO_NFC_DEP_MASK; + break; + default: + return -EPROTO; + } + + return 0; +} + +static int microread_complete_target_discovered(struct nfc_hci_dev *hdev, + u8 gate, + struct nfc_target *target) +{ + return 0; +} + +#define MICROREAD_CB_TYPE_READER_ALL 1 + +static void microread_im_transceive_cb(void *context, struct sk_buff *skb, + int err) +{ + struct microread_info *info = context; + + switch (info->async_cb_type) { + case MICROREAD_CB_TYPE_READER_ALL: + if (err == 0) { + if (skb->len == 0) { + err = -EPROTO; + kfree_skb(skb); + info->async_cb(info->async_cb_context, NULL, + -EPROTO); + return; + } + + if (skb->data[skb->len - 1] != 0) { + err = nfc_hci_result_to_errno( + skb->data[skb->len - 1]); + kfree_skb(skb); + info->async_cb(info->async_cb_context, NULL, + err); + return; + } + + skb_trim(skb, skb->len - 1); /* RF Error ind. */ + } + info->async_cb(info->async_cb_context, skb, err); + break; + default: + if (err == 0) + kfree_skb(skb); + break; + } +} + +/* + * Returns: + * <= 0: driver handled the data exchange + * 1: driver doesn't especially handle, please do standard processing + */ +static int microread_im_transceive(struct nfc_hci_dev *hdev, + struct nfc_target *target, + struct sk_buff *skb, data_exchange_cb_t cb, + void *cb_context) +{ + struct microread_info *info = nfc_hci_get_clientdata(hdev); + u8 control_bits; + u16 crc; + + pr_info("data exchange to gate 0x%x\n", target->hci_reader_gate); + + if (target->hci_reader_gate == MICROREAD_GATE_ID_P2P_INITIATOR) { + *skb_push(skb, 1) = 0; + + return nfc_hci_send_event(hdev, target->hci_reader_gate, + MICROREAD_EVT_P2P_INITIATOR_EXCHANGE_TO_RF, + skb->data, skb->len); + } + + switch (target->hci_reader_gate) { + case MICROREAD_GATE_ID_MREAD_ISO_A: + control_bits = 0xCB; + break; + case MICROREAD_GATE_ID_MREAD_ISO_A_3: + control_bits = 0xCB; + break; + case MICROREAD_GATE_ID_MREAD_ISO_B: + control_bits = 0xCB; + break; + case MICROREAD_GATE_ID_MREAD_NFC_T1: + control_bits = 0x1B; + + crc = crc_ccitt(0xffff, skb->data, skb->len); + crc = ~crc; + *skb_put(skb, 1) = crc & 0xff; + *skb_put(skb, 1) = crc >> 8; + break; + case MICROREAD_GATE_ID_MREAD_NFC_T3: + control_bits = 0xDB; + break; + default: + pr_info("Abort im_transceive to invalid gate 0x%x\n", + target->hci_reader_gate); + return 1; + } + + *skb_push(skb, 1) = control_bits; + + info->async_cb_type = MICROREAD_CB_TYPE_READER_ALL; + info->async_cb = cb; + info->async_cb_context = cb_context; + + return nfc_hci_send_cmd_async(hdev, target->hci_reader_gate, + MICROREAD_CMD_MREAD_EXCHANGE, + skb->data, skb->len, + microread_im_transceive_cb, info); +} + +static int microread_tm_send(struct nfc_hci_dev *hdev, struct sk_buff *skb) +{ + int r; + + r = nfc_hci_send_event(hdev, MICROREAD_GATE_ID_P2P_TARGET, + MICROREAD_EVT_MCARD_EXCHANGE, + skb->data, skb->len); + + kfree_skb(skb); + + return r; +} + +static void microread_target_discovered(struct nfc_hci_dev *hdev, u8 gate, + struct sk_buff *skb) +{ + struct nfc_target *targets; + int r = 0; + + pr_info("target discovered to gate 0x%x\n", gate); + + targets = kzalloc(sizeof(struct nfc_target), GFP_KERNEL); + if (targets == NULL) { + r = -ENOMEM; + goto exit; + } + + targets->hci_reader_gate = gate; + + switch (gate) { + case MICROREAD_GATE_ID_MREAD_ISO_A: + targets->supported_protocols = + nfc_hci_sak_to_protocol(skb->data[MICROREAD_EMCF_A_SAK]); + targets->sens_res = + be16_to_cpu(*(u16 *)&skb->data[MICROREAD_EMCF_A_ATQA]); + targets->sel_res = skb->data[MICROREAD_EMCF_A_SAK]; + memcpy(targets->nfcid1, &skb->data[MICROREAD_EMCF_A_UID], + skb->data[MICROREAD_EMCF_A_LEN]); + targets->nfcid1_len = skb->data[MICROREAD_EMCF_A_LEN]; + break; + case MICROREAD_GATE_ID_MREAD_ISO_A_3: + targets->supported_protocols = + nfc_hci_sak_to_protocol(skb->data[MICROREAD_EMCF_A3_SAK]); + targets->sens_res = + be16_to_cpu(*(u16 *)&skb->data[MICROREAD_EMCF_A3_ATQA]); + targets->sel_res = skb->data[MICROREAD_EMCF_A3_SAK]; + memcpy(targets->nfcid1, &skb->data[MICROREAD_EMCF_A3_UID], + skb->data[MICROREAD_EMCF_A3_LEN]); + targets->nfcid1_len = skb->data[MICROREAD_EMCF_A3_LEN]; + break; + case MICROREAD_GATE_ID_MREAD_ISO_B: + targets->supported_protocols = NFC_PROTO_ISO14443_B_MASK; + memcpy(targets->nfcid1, &skb->data[MICROREAD_EMCF_B_UID], 4); + targets->nfcid1_len = 4; + break; + case MICROREAD_GATE_ID_MREAD_NFC_T1: + targets->supported_protocols = NFC_PROTO_JEWEL_MASK; + targets->sens_res = + le16_to_cpu(*(u16 *)&skb->data[MICROREAD_EMCF_T1_ATQA]); + memcpy(targets->nfcid1, &skb->data[MICROREAD_EMCF_T1_UID], 4); + targets->nfcid1_len = 4; + break; + case MICROREAD_GATE_ID_MREAD_NFC_T3: + targets->supported_protocols = NFC_PROTO_FELICA_MASK; + memcpy(targets->nfcid1, &skb->data[MICROREAD_EMCF_T3_UID], 8); + targets->nfcid1_len = 8; + break; + default: + pr_info("discard target discovered to gate 0x%x\n", gate); + goto exit_free; + } + + r = nfc_targets_found(hdev->ndev, targets, 1); + +exit_free: + kfree(targets); + +exit: + kfree_skb(skb); + + if (r) + pr_err("Failed to handle discovered target err=%d", r); +} + +static int microread_event_received(struct nfc_hci_dev *hdev, u8 gate, + u8 event, struct sk_buff *skb) +{ + int r; + u8 mode; + + pr_info("Microread received event 0x%x to gate 0x%x\n", event, gate); + + switch (event) { + case MICROREAD_EVT_MREAD_CARD_FOUND: + microread_target_discovered(hdev, gate, skb); + return 0; + + case MICROREAD_EVT_P2P_INITIATOR_EXCHANGE_FROM_RF: + if (skb->len < 1) { + kfree_skb(skb); + return -EPROTO; + } + + if (skb->data[skb->len - 1]) { + kfree_skb(skb); + return -EIO; + } + + skb_trim(skb, skb->len - 1); + + r = nfc_tm_data_received(hdev->ndev, skb); + break; + + case MICROREAD_EVT_MCARD_FIELD_ON: + case MICROREAD_EVT_MCARD_FIELD_OFF: + kfree_skb(skb); + return 0; + + case MICROREAD_EVT_P2P_TARGET_ACTIVATED: + r = nfc_tm_activated(hdev->ndev, NFC_PROTO_NFC_DEP_MASK, + NFC_COMM_PASSIVE, skb->data, + skb->len); + + kfree_skb(skb); + break; + + case MICROREAD_EVT_MCARD_EXCHANGE: + if (skb->len < 1) { + kfree_skb(skb); + return -EPROTO; + } + + if (skb->data[skb->len-1]) { + kfree_skb(skb); + return -EIO; + } + + skb_trim(skb, skb->len - 1); + + r = nfc_tm_data_received(hdev->ndev, skb); + break; + + case MICROREAD_EVT_P2P_TARGET_DEACTIVATED: + kfree_skb(skb); + + mode = 0xff; + r = nfc_hci_set_param(hdev, MICROREAD_GATE_ID_P2P_TARGET, + MICROREAD_PAR_P2P_TARGET_MODE, &mode, 1); + if (r) + break; + + r = nfc_hci_send_event(hdev, gate, + MICROREAD_EVT_MREAD_DISCOVERY_STOP, NULL, + 0); + break; + + default: + return 1; + } + + return r; +} + +static struct nfc_hci_ops microread_hci_ops = { + .open = microread_open, + .close = microread_close, + .hci_ready = microread_hci_ready, + .xmit = microread_xmit, + .start_poll = microread_start_poll, + .dep_link_up = microread_dep_link_up, + .dep_link_down = microread_dep_link_down, + .target_from_gate = microread_target_from_gate, + .complete_target_discovered = microread_complete_target_discovered, + .im_transceive = microread_im_transceive, + .tm_send = microread_tm_send, + .check_presence = NULL, + .event_received = microread_event_received, +}; + +int microread_probe(void *phy_id, struct nfc_phy_ops *phy_ops, char *llc_name, + int phy_headroom, int phy_tailroom, int phy_payload, + struct nfc_hci_dev **hdev) +{ + struct microread_info *info; + unsigned long quirks = 0; + u32 protocols, se; + struct nfc_hci_init_data init_data; + int r; + + info = kzalloc(sizeof(struct microread_info), GFP_KERNEL); + if (!info) { + pr_err("Cannot allocate memory for microread_info.\n"); + r = -ENOMEM; + goto err_info_alloc; + } + + info->phy_ops = phy_ops; + info->phy_id = phy_id; + + init_data.gate_count = ARRAY_SIZE(microread_gates); + memcpy(init_data.gates, microread_gates, sizeof(microread_gates)); + + strcpy(init_data.session_id, "MICROREA"); + + set_bit(NFC_HCI_QUIRK_SHORT_CLEAR, &quirks); + + protocols = NFC_PROTO_JEWEL_MASK | + NFC_PROTO_MIFARE_MASK | + NFC_PROTO_FELICA_MASK | + NFC_PROTO_ISO14443_MASK | + NFC_PROTO_ISO14443_B_MASK | + NFC_PROTO_NFC_DEP_MASK; + + se = NFC_SE_UICC | NFC_SE_EMBEDDED; + + info->hdev = nfc_hci_allocate_device(µread_hci_ops, &init_data, + quirks, protocols, se, llc_name, + phy_headroom + + MICROREAD_CMDS_HEADROOM, + phy_tailroom + + MICROREAD_CMD_TAILROOM, + phy_payload); + if (!info->hdev) { + pr_err("Cannot allocate nfc hdev.\n"); + r = -ENOMEM; + goto err_alloc_hdev; + } + + nfc_hci_set_clientdata(info->hdev, info); + + r = nfc_hci_register_device(info->hdev); + if (r) + goto err_regdev; + + *hdev = info->hdev; + + return 0; + +err_regdev: + nfc_hci_free_device(info->hdev); + +err_alloc_hdev: + kfree(info); + +err_info_alloc: + return r; +} +EXPORT_SYMBOL(microread_probe); + +void microread_remove(struct nfc_hci_dev *hdev) +{ + struct microread_info *info = nfc_hci_get_clientdata(hdev); + + nfc_hci_unregister_device(hdev); + nfc_hci_free_device(hdev); + kfree(info); +} +EXPORT_SYMBOL(microread_remove); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION(DRIVER_DESC); diff --git a/drivers/nfc/microread/microread.h b/drivers/nfc/microread/microread.h new file mode 100644 index 000000000000..64b447a1c5bf --- /dev/null +++ b/drivers/nfc/microread/microread.h @@ -0,0 +1,33 @@ +/* + * Copyright (C) 2011 - 2012 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef __LOCAL_MICROREAD_H_ +#define __LOCAL_MICROREAD_H_ + +#include + +#define DRIVER_DESC "NFC driver for microread" + +int microread_probe(void *phy_id, struct nfc_phy_ops *phy_ops, char *llc_name, + int phy_headroom, int phy_tailroom, int phy_payload, + struct nfc_hci_dev **hdev); + +void microread_remove(struct nfc_hci_dev *hdev); + +#endif /* __LOCAL_MICROREAD_H_ */ diff --git a/include/linux/platform_data/microread.h b/include/linux/platform_data/microread.h new file mode 100644 index 000000000000..cfda59b226ee --- /dev/null +++ b/include/linux/platform_data/microread.h @@ -0,0 +1,35 @@ +/* + * Driver include for the PN544 NFC chip. + * + * Copyright (C) 2011 Tieto Poland + * Copyright (C) 2012 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _MICROREAD_H +#define _MICROREAD_H + +#include + +#define MICROREAD_DRIVER_NAME "microread" + +/* board config platform data for microread */ +struct microread_nfc_platform_data { + unsigned int rst_gpio; + unsigned int irq_gpio; + unsigned int ioh_gpio; +}; + +#endif /* _MICROREAD_H */ From 71054c7db161b5947de8c2bcb02d5934cbddb722 Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Tue, 18 Dec 2012 14:56:15 +0100 Subject: [PATCH 025/209] NFC: microread: Add i2c physical layer Signed-off-by: Samuel Ortiz --- drivers/nfc/microread/Kconfig | 11 ++ drivers/nfc/microread/Makefile | 3 + drivers/nfc/microread/i2c.c | 340 +++++++++++++++++++++++++++++++++ 3 files changed, 354 insertions(+) create mode 100644 drivers/nfc/microread/i2c.c diff --git a/drivers/nfc/microread/Kconfig b/drivers/nfc/microread/Kconfig index 5b89d011d098..cd6744bc8db6 100644 --- a/drivers/nfc/microread/Kconfig +++ b/drivers/nfc/microread/Kconfig @@ -11,3 +11,14 @@ config NFC_MICROREAD To compile this driver as a module, choose m here. The module will be called microread. Say N if unsure. + +config NFC_MICROREAD_I2C + tristate "NFC Microread i2c support" + depends on NFC_MICROREAD && I2C && NFC_SHDLC + ---help--- + This module adds support for the i2c interface of adapters using + Inside microread chipsets. Select this if your platform is using + the i2c bus. + + If you choose to build a module, it'll be called microread_i2c. + Say N if unsure. diff --git a/drivers/nfc/microread/Makefile b/drivers/nfc/microread/Makefile index 9ce2c53f49a7..74c185165ebf 100644 --- a/drivers/nfc/microread/Makefile +++ b/drivers/nfc/microread/Makefile @@ -2,4 +2,7 @@ # Makefile for Microread HCI based NFC driver # +microread_i2c-objs = i2c.o + obj-$(CONFIG_NFC_MICROREAD) += microread.o +obj-$(CONFIG_NFC_MICROREAD_I2C) += microread_i2c.o diff --git a/drivers/nfc/microread/i2c.c b/drivers/nfc/microread/i2c.c new file mode 100644 index 000000000000..101089495bf8 --- /dev/null +++ b/drivers/nfc/microread/i2c.c @@ -0,0 +1,340 @@ +/* + * HCI based Driver for Inside Secure microread NFC Chip - i2c layer + * + * Copyright (C) 2013 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "microread.h" + +#define MICROREAD_I2C_DRIVER_NAME "microread" + +#define MICROREAD_I2C_FRAME_HEADROOM 1 +#define MICROREAD_I2C_FRAME_TAILROOM 1 + +/* framing in HCI mode */ +#define MICROREAD_I2C_LLC_LEN 1 +#define MICROREAD_I2C_LLC_CRC 1 +#define MICROREAD_I2C_LLC_LEN_CRC (MICROREAD_I2C_LLC_LEN + \ + MICROREAD_I2C_LLC_CRC) +#define MICROREAD_I2C_LLC_MIN_SIZE (1 + MICROREAD_I2C_LLC_LEN_CRC) +#define MICROREAD_I2C_LLC_MAX_PAYLOAD 29 +#define MICROREAD_I2C_LLC_MAX_SIZE (MICROREAD_I2C_LLC_LEN_CRC + 1 + \ + MICROREAD_I2C_LLC_MAX_PAYLOAD) + +struct microread_i2c_phy { + struct i2c_client *i2c_dev; + struct nfc_hci_dev *hdev; + + int irq; + + int hard_fault; /* + * < 0 if hardware error occured (e.g. i2c err) + * and prevents normal operation. + */ +}; + +#define I2C_DUMP_SKB(info, skb) \ +do { \ + pr_debug("%s:\n", info); \ + print_hex_dump(KERN_DEBUG, "i2c: ", DUMP_PREFIX_OFFSET, \ + 16, 1, (skb)->data, (skb)->len, 0); \ +} while (0) + +static void microread_i2c_add_len_crc(struct sk_buff *skb) +{ + int i; + u8 crc = 0; + int len; + + len = skb->len; + *skb_push(skb, 1) = len; + + for (i = 0; i < skb->len; i++) + crc = crc ^ skb->data[i]; + + *skb_put(skb, 1) = crc; +} + +static void microread_i2c_remove_len_crc(struct sk_buff *skb) +{ + skb_pull(skb, MICROREAD_I2C_FRAME_HEADROOM); + skb_trim(skb, MICROREAD_I2C_FRAME_TAILROOM); +} + +static int check_crc(struct sk_buff *skb) +{ + int i; + u8 crc = 0; + + for (i = 0; i < skb->len - 1; i++) + crc = crc ^ skb->data[i]; + + if (crc != skb->data[skb->len-1]) { + pr_err(MICROREAD_I2C_DRIVER_NAME + ": CRC error 0x%x != 0x%x\n", + crc, skb->data[skb->len-1]); + + pr_info(DRIVER_DESC ": %s : BAD CRC\n", __func__); + + return -EPERM; + } + + return 0; +} + +static int microread_i2c_enable(void *phy_id) +{ + return 0; +} + +static void microread_i2c_disable(void *phy_id) +{ + return; +} + +static int microread_i2c_write(void *phy_id, struct sk_buff *skb) +{ + int r; + struct microread_i2c_phy *phy = phy_id; + struct i2c_client *client = phy->i2c_dev; + + if (phy->hard_fault != 0) + return phy->hard_fault; + + usleep_range(3000, 6000); + + microread_i2c_add_len_crc(skb); + + I2C_DUMP_SKB("i2c frame written", skb); + + r = i2c_master_send(client, skb->data, skb->len); + + if (r == -EREMOTEIO) { /* Retry, chip was in standby */ + usleep_range(6000, 10000); + r = i2c_master_send(client, skb->data, skb->len); + } + + if (r >= 0) { + if (r != skb->len) + r = -EREMOTEIO; + else + r = 0; + } + + microread_i2c_remove_len_crc(skb); + + return r; +} + + +static int microread_i2c_read(struct microread_i2c_phy *phy, + struct sk_buff **skb) +{ + int r; + u8 len; + u8 tmp[MICROREAD_I2C_LLC_MAX_SIZE - 1]; + struct i2c_client *client = phy->i2c_dev; + + pr_debug("%s\n", __func__); + + r = i2c_master_recv(client, &len, 1); + if (r != 1) { + dev_err(&client->dev, "cannot read len byte\n"); + return -EREMOTEIO; + } + + if ((len < MICROREAD_I2C_LLC_MIN_SIZE) || + (len > MICROREAD_I2C_LLC_MAX_SIZE)) { + dev_err(&client->dev, "invalid len byte\n"); + pr_err("invalid len byte\n"); + r = -EBADMSG; + goto flush; + } + + *skb = alloc_skb(1 + len, GFP_KERNEL); + if (*skb == NULL) { + r = -ENOMEM; + goto flush; + } + + *skb_put(*skb, 1) = len; + + r = i2c_master_recv(client, skb_put(*skb, len), len); + if (r != len) { + kfree_skb(*skb); + return -EREMOTEIO; + } + + I2C_DUMP_SKB("cc frame read", *skb); + + r = check_crc(*skb); + if (r != 0) { + kfree_skb(*skb); + r = -EBADMSG; + goto flush; + } + + skb_pull(*skb, 1); + skb_trim(*skb, (*skb)->len - MICROREAD_I2C_FRAME_TAILROOM); + + usleep_range(3000, 6000); + + return 0; + +flush: + if (i2c_master_recv(client, tmp, sizeof(tmp)) < 0) + r = -EREMOTEIO; + + usleep_range(3000, 6000); + + return r; +} + +static irqreturn_t microread_i2c_irq_thread_fn(int irq, void *phy_id) +{ + struct microread_i2c_phy *phy = phy_id; + struct i2c_client *client; + struct sk_buff *skb = NULL; + int r; + + if (!phy || irq != phy->i2c_dev->irq) { + WARN_ON_ONCE(1); + return IRQ_NONE; + } + + client = phy->i2c_dev; + dev_dbg(&client->dev, "IRQ\n"); + + if (phy->hard_fault != 0) + return IRQ_HANDLED; + + r = microread_i2c_read(phy, &skb); + if (r == -EREMOTEIO) { + phy->hard_fault = r; + + nfc_hci_recv_frame(phy->hdev, NULL); + + return IRQ_HANDLED; + } else if ((r == -ENOMEM) || (r == -EBADMSG)) { + return IRQ_HANDLED; + } + + nfc_hci_recv_frame(phy->hdev, skb); + + return IRQ_HANDLED; +} + +static struct nfc_phy_ops i2c_phy_ops = { + .write = microread_i2c_write, + .enable = microread_i2c_enable, + .disable = microread_i2c_disable, +}; + +static int microread_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct microread_i2c_phy *phy; + struct microread_nfc_platform_data *pdata = + dev_get_platdata(&client->dev); + int r; + + dev_dbg(&client->dev, "client %p", client); + + if (!pdata) { + dev_err(&client->dev, "client %p: missing platform data", + client); + return -EINVAL; + } + + phy = devm_kzalloc(&client->dev, sizeof(struct microread_i2c_phy), + GFP_KERNEL); + if (!phy) { + dev_err(&client->dev, "Can't allocate microread phy"); + return -ENOMEM; + } + + i2c_set_clientdata(client, phy); + phy->i2c_dev = client; + + r = request_threaded_irq(client->irq, NULL, microread_i2c_irq_thread_fn, + IRQF_TRIGGER_RISING | IRQF_ONESHOT, + MICROREAD_I2C_DRIVER_NAME, phy); + if (r) { + dev_err(&client->dev, "Unable to register IRQ handler"); + return r; + } + + r = microread_probe(phy, &i2c_phy_ops, LLC_SHDLC_NAME, + MICROREAD_I2C_FRAME_HEADROOM, + MICROREAD_I2C_FRAME_TAILROOM, + MICROREAD_I2C_LLC_MAX_PAYLOAD, &phy->hdev); + if (r < 0) + goto err_irq; + + dev_info(&client->dev, "Probed"); + + return 0; + +err_irq: + free_irq(client->irq, phy); + + return r; +} + +static int microread_i2c_remove(struct i2c_client *client) +{ + struct microread_i2c_phy *phy = i2c_get_clientdata(client); + + dev_dbg(&client->dev, "%s\n", __func__); + + microread_remove(phy->hdev); + + free_irq(client->irq, phy); + + return 0; +} + +static struct i2c_device_id microread_i2c_id[] = { + { MICROREAD_I2C_DRIVER_NAME, 0}, + { } +}; +MODULE_DEVICE_TABLE(i2c, microread_i2c_id); + +static struct i2c_driver microread_i2c_driver = { + .driver = { + .name = MICROREAD_I2C_DRIVER_NAME, + }, + .probe = microread_i2c_probe, + .remove = microread_i2c_remove, + .id_table = microread_i2c_id, +}; + +module_i2c_driver(microread_i2c_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION(DRIVER_DESC); From eef9e54ce8b8dd08e281e0c399cced807c98959e Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 29 Jan 2013 13:09:34 +0100 Subject: [PATCH 026/209] mac80211: send deauth when connection is lost If the driver determines the connection is lost, send a deauth frame to the AP anyway just in case it still considers the connection alive. The frame might not go through, but at least we've tried. Signed-off-by: Johannes Berg --- net/mac80211/mlme.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 4ff52d0aaf9c..756df39f1aba 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1827,8 +1827,7 @@ struct sk_buff *ieee80211_ap_probereq_get(struct ieee80211_hw *hw, } EXPORT_SYMBOL(ieee80211_ap_probereq_get); -static void __ieee80211_disconnect(struct ieee80211_sub_if_data *sdata, - bool transmit_frame) +static void __ieee80211_disconnect(struct ieee80211_sub_if_data *sdata) { struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; struct ieee80211_local *local = sdata->local; @@ -1842,7 +1841,7 @@ static void __ieee80211_disconnect(struct ieee80211_sub_if_data *sdata, ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, - transmit_frame, frame_buf); + true, frame_buf); ifmgd->flags &= ~IEEE80211_STA_CSA_RECEIVED; mutex_unlock(&ifmgd->mtx); @@ -1876,7 +1875,7 @@ static void ieee80211_beacon_connection_loss_work(struct work_struct *work) if (sdata->local->hw.flags & IEEE80211_HW_CONNECTION_MONITOR) { sdata_info(sdata, "Connection to AP %pM lost\n", ifmgd->bssid); - __ieee80211_disconnect(sdata, false); + __ieee80211_disconnect(sdata); } else { ieee80211_mgd_probe_ap(sdata, true); } @@ -1890,7 +1889,7 @@ static void ieee80211_csa_connection_drop_work(struct work_struct *work) ieee80211_wake_queues_by_reason(&sdata->local->hw, IEEE80211_QUEUE_STOP_REASON_CSA); - __ieee80211_disconnect(sdata, true); + __ieee80211_disconnect(sdata); } void ieee80211_beacon_loss(struct ieee80211_vif *vif) From 682bd38b8ac1fa3e84e84cddd1f1d7eeebce1212 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 29 Jan 2013 13:13:50 +0100 Subject: [PATCH 027/209] mac80211: always allow calling ieee80211_connection_loss() With multi-channel, there's a corner case where a driver doesn't receive a beacon soon enough to be able to sync its timers with the AP. In this case, the only recovery (after trying again) is to disconnect from the AP. Allow calling ieee80211_connection_loss() for such cases. To make that possible, modify the work function to not rely on the IEEE80211_HW_CONNECTION_MONITOR flag but use new state kept in the interface instead. Signed-off-by: Johannes Berg --- include/net/mac80211.h | 2 ++ net/mac80211/ieee80211_i.h | 1 + net/mac80211/mlme.c | 6 ++++-- 3 files changed, 7 insertions(+), 2 deletions(-) diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 164fd4b6503c..7da11211825d 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -3877,6 +3877,8 @@ void ieee80211_beacon_loss(struct ieee80211_vif *vif); * When beacon filtering is enabled with %IEEE80211_VIF_BEACON_FILTER, and * %IEEE80211_CONF_PS and %IEEE80211_HW_CONNECTION_MONITOR are set, the driver * needs to inform if the connection to the AP has been lost. + * The function may also be called if the connection needs to be terminated + * for some other reason, even if %IEEE80211_HW_CONNECTION_MONITOR isn't set. * * This function will cause immediate change to disassociated state, * without connection recovery attempts. diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index c9c66dec170a..25a0647ada8f 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -391,6 +391,7 @@ struct ieee80211_if_managed { unsigned long probe_timeout; int probe_send_count; bool nullfunc_failed; + bool connection_loss; struct mutex mtx; struct cfg80211_bss *associated; diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 756df39f1aba..5e188a5d812f 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1872,7 +1872,7 @@ static void ieee80211_beacon_connection_loss_work(struct work_struct *work) rcu_read_unlock(); } - if (sdata->local->hw.flags & IEEE80211_HW_CONNECTION_MONITOR) { + if (ifmgd->connection_loss) { sdata_info(sdata, "Connection to AP %pM lost\n", ifmgd->bssid); __ieee80211_disconnect(sdata); @@ -1900,6 +1900,7 @@ void ieee80211_beacon_loss(struct ieee80211_vif *vif) trace_api_beacon_loss(sdata); WARN_ON(hw->flags & IEEE80211_HW_CONNECTION_MONITOR); + sdata->u.mgd.connection_loss = false; ieee80211_queue_work(hw, &sdata->u.mgd.beacon_connection_loss_work); } EXPORT_SYMBOL(ieee80211_beacon_loss); @@ -1911,7 +1912,7 @@ void ieee80211_connection_loss(struct ieee80211_vif *vif) trace_api_connection_loss(sdata); - WARN_ON(!(hw->flags & IEEE80211_HW_CONNECTION_MONITOR)); + sdata->u.mgd.connection_loss = true; ieee80211_queue_work(hw, &sdata->u.mgd.beacon_connection_loss_work); } EXPORT_SYMBOL(ieee80211_connection_loss); @@ -3154,6 +3155,7 @@ static void ieee80211_sta_bcn_mon_timer(unsigned long data) if (local->quiescing) return; + sdata->u.mgd.connection_loss = false; ieee80211_queue_work(&sdata->local->hw, &sdata->u.mgd.beacon_connection_loss_work); } From 42745e039312ab4672c60ec584651f0c74e8264f Mon Sep 17 00:00:00 2001 From: Vladimir Kondratiev Date: Mon, 4 Feb 2013 13:53:11 +0200 Subject: [PATCH 028/209] cfg80211: expand per-station byte counters to 64bit In per-station statistics, present 32bit counters are too small for practical purposes - with gigabit speeds, it get overlapped every few seconds. Expand counters in the struct station_info to be 64-bit. Driver can still fill only 32-bit and indicate in @filled only bits like STATION_INFO_[TR]X_BYTES; in case driver provides full 64-bit counter, it should also set in @filled bit STATION_INFO_[TR]RX_BYTES64 Netlink sends both 32-bit and 64-bit counters, if present, to not break userspace. Signed-off-by: Vladimir Kondratiev [change to also have 32-bit counters if driver advertises 64-bit] Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 12 ++++++++---- include/uapi/linux/nl80211.h | 4 ++++ net/wireless/nl80211.c | 16 +++++++++++++--- 3 files changed, 25 insertions(+), 7 deletions(-) diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 63599ab6005b..94a0810ef68e 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -672,8 +672,10 @@ struct station_parameters { * @STATION_INFO_SIGNAL: @signal filled * @STATION_INFO_TX_BITRATE: @txrate fields are filled * (tx_bitrate, tx_bitrate_flags and tx_bitrate_mcs) - * @STATION_INFO_RX_PACKETS: @rx_packets filled - * @STATION_INFO_TX_PACKETS: @tx_packets filled + * @STATION_INFO_RX_PACKETS: @rx_packets filled with 32-bit value + * @STATION_INFO_TX_PACKETS: @tx_packets filled with 32-bit value + * @STATION_INFO_RX_PACKETS64: @rx_packets filled with 64-bit value + * @STATION_INFO_TX_PACKETS64: @tx_packets filled with 64-bit value * @STATION_INFO_TX_RETRIES: @tx_retries filled * @STATION_INFO_TX_FAILED: @tx_failed filled * @STATION_INFO_RX_DROP_MISC: @rx_dropped_misc filled @@ -714,6 +716,8 @@ enum station_info_flags { STATION_INFO_LOCAL_PM = 1<<21, STATION_INFO_PEER_PM = 1<<22, STATION_INFO_NONPEER_PM = 1<<23, + STATION_INFO_RX_BYTES64 = 1<<24, + STATION_INFO_TX_BYTES64 = 1<<25, }; /** @@ -835,8 +839,8 @@ struct station_info { u32 filled; u32 connected_time; u32 inactive_time; - u32 rx_bytes; - u32 tx_bytes; + u64 rx_bytes; + u64 tx_bytes; u16 llid; u16 plid; u8 plink_state; diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 225a65e72219..9a2ecdc4136c 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -1857,6 +1857,8 @@ enum nl80211_sta_bss_param { * @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs) * @NL80211_STA_INFO_RX_BYTES: total received bytes (u32, from this station) * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (u32, to this station) + * @NL80211_STA_INFO_RX_BYTES64: total received bytes (u64, from this station) + * @NL80211_STA_INFO_TX_BYTES64: total transmitted bytes (u64, to this station) * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm) * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute * containing info as possible, see &enum nl80211_rate_info @@ -1909,6 +1911,8 @@ enum nl80211_sta_info { NL80211_STA_INFO_LOCAL_PM, NL80211_STA_INFO_PEER_PM, NL80211_STA_INFO_NONPEER_PM, + NL80211_STA_INFO_RX_BYTES64, + NL80211_STA_INFO_TX_BYTES64, /* keep last */ __NL80211_STA_INFO_AFTER_LAST, diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index d359734b6972..807d448e702e 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -3057,12 +3057,22 @@ static int nl80211_send_station(struct sk_buff *msg, u32 portid, u32 seq, nla_put_u32(msg, NL80211_STA_INFO_INACTIVE_TIME, sinfo->inactive_time)) goto nla_put_failure; - if ((sinfo->filled & STATION_INFO_RX_BYTES) && + if ((sinfo->filled & (STATION_INFO_RX_BYTES | + STATION_INFO_RX_BYTES64)) && nla_put_u32(msg, NL80211_STA_INFO_RX_BYTES, + (u32)sinfo->rx_bytes)) + goto nla_put_failure; + if ((sinfo->filled & (STATION_INFO_TX_BYTES | + NL80211_STA_INFO_TX_BYTES64)) && + nla_put_u32(msg, NL80211_STA_INFO_TX_BYTES, + (u32)sinfo->tx_bytes)) + goto nla_put_failure; + if ((sinfo->filled & STATION_INFO_RX_BYTES64) && + nla_put_u64(msg, NL80211_STA_INFO_RX_BYTES64, sinfo->rx_bytes)) goto nla_put_failure; - if ((sinfo->filled & STATION_INFO_TX_BYTES) && - nla_put_u32(msg, NL80211_STA_INFO_TX_BYTES, + if ((sinfo->filled & STATION_INFO_TX_BYTES64) && + nla_put_u64(msg, NL80211_STA_INFO_TX_BYTES64, sinfo->tx_bytes)) goto nla_put_failure; if ((sinfo->filled & STATION_INFO_LLID) && From 5622f5bb8dd3cafe0e56014ed03e31957d1b4a03 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 30 Jan 2013 00:26:45 +0100 Subject: [PATCH 029/209] cfg80211: refactor hidden SSID finding Instead of duplicating the rbtree functions, pass an argument to the compare function. This removes the code duplication for the two searches. Signed-off-by: Johannes Berg --- net/wireless/scan.c | 82 +++++++++++---------------------------------- 1 file changed, 20 insertions(+), 62 deletions(-) diff --git a/net/wireless/scan.c b/net/wireless/scan.c index ca367c58a3e2..cfc4e1aa8dad 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -425,34 +425,13 @@ static int cmp_bss_core(struct cfg80211_bss *a, struct cfg80211_bss *b) } static int cmp_bss(struct cfg80211_bss *a, - struct cfg80211_bss *b) -{ - const struct cfg80211_bss_ies *a_ies, *b_ies; - int r; - - r = cmp_bss_core(a, b); - if (r) - return r; - - a_ies = rcu_access_pointer(a->ies); - if (!a_ies) - return -1; - b_ies = rcu_access_pointer(b->ies); - if (!b_ies) - return 1; - - return cmp_ies(WLAN_EID_SSID, - a_ies->data, a_ies->len, - b_ies->data, b_ies->len); -} - -static int cmp_hidden_bss(struct cfg80211_bss *a, struct cfg80211_bss *b) + struct cfg80211_bss *b, + bool hide_ssid) { const struct cfg80211_bss_ies *a_ies, *b_ies; const u8 *ie1; const u8 *ie2; - int i; - int r; + int i, r; r = cmp_bss_core(a, b); if (r) @@ -468,15 +447,13 @@ static int cmp_hidden_bss(struct cfg80211_bss *a, struct cfg80211_bss *b) ie1 = cfg80211_find_ie(WLAN_EID_SSID, a_ies->data, a_ies->len); ie2 = cfg80211_find_ie(WLAN_EID_SSID, b_ies->data, b_ies->len); + if (!ie1 && !ie2) + return 0; + /* - * Key comparator must use same algorithm in any rb-tree - * search function (order is important), otherwise ordering - * of items in the tree is broken and search gives incorrect - * results. This code uses same order as cmp_ies() does. - * - * Note that due to the differring behaviour with hidden SSIDs - * this function only works when "b" is the tree element and - * "a" is the key we're looking for. + * Note that with "hide_ssid", the function returns a match if + * the already-present BSS ("b") is a hidden SSID beacon for + * the new BSS ("a"). */ /* sort missing IE before (left of) present IE */ @@ -485,14 +462,17 @@ static int cmp_hidden_bss(struct cfg80211_bss *a, struct cfg80211_bss *b) if (!ie2) return 1; - /* zero-size SSID is used as an indication of the hidden bss */ - if (!ie2[1]) + /* zero-length SSID is used as an indication of the hidden bss */ + if (hide_ssid && !ie2[1]) return 0; /* sort by length first, then by contents */ if (ie1[1] != ie2[1]) return ie2[1] - ie1[1]; + if (!hide_ssid) + return memcmp(ie1 + 2, ie2 + 2, ie1[1]); + /* * zeroed SSID ie is another indication of a hidden bss; * if it isn't zeroed just return the regular sort value @@ -584,7 +564,7 @@ static void rb_insert_bss(struct cfg80211_registered_device *dev, parent = *p; tbss = rb_entry(parent, struct cfg80211_internal_bss, rbn); - cmp = cmp_bss(&bss->pub, &tbss->pub); + cmp = cmp_bss(&bss->pub, &tbss->pub, false); if (WARN_ON(!cmp)) { /* will sort of leak this BSS */ @@ -603,7 +583,8 @@ static void rb_insert_bss(struct cfg80211_registered_device *dev, static struct cfg80211_internal_bss * rb_find_bss(struct cfg80211_registered_device *dev, - struct cfg80211_internal_bss *res) + struct cfg80211_internal_bss *res, + bool hidden) { struct rb_node *n = dev->bss_tree.rb_node; struct cfg80211_internal_bss *bss; @@ -611,30 +592,7 @@ rb_find_bss(struct cfg80211_registered_device *dev, while (n) { bss = rb_entry(n, struct cfg80211_internal_bss, rbn); - r = cmp_bss(&res->pub, &bss->pub); - - if (r == 0) - return bss; - else if (r < 0) - n = n->rb_left; - else - n = n->rb_right; - } - - return NULL; -} - -static struct cfg80211_internal_bss * -rb_find_hidden_bss(struct cfg80211_registered_device *dev, - struct cfg80211_internal_bss *res) -{ - struct rb_node *n = dev->bss_tree.rb_node; - struct cfg80211_internal_bss *bss; - int r; - - while (n) { - bss = rb_entry(n, struct cfg80211_internal_bss, rbn); - r = cmp_hidden_bss(&res->pub, &bss->pub); + r = cmp_bss(&res->pub, &bss->pub, hidden); if (r == 0) return bss; @@ -684,7 +642,7 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev, return NULL; } - found = rb_find_bss(dev, tmp); + found = rb_find_bss(dev, tmp, false); if (found) { found->pub.beacon_interval = tmp->pub.beacon_interval; @@ -739,7 +697,7 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev, /* TODO: The code is not trying to update existing probe * response bss entries when beacon ies are * getting changed. */ - hidden = rb_find_hidden_bss(dev, tmp); + hidden = rb_find_bss(dev, tmp, true); if (hidden) copy_hidden_ies(tmp, hidden); From 4593c4cbe1c96b3995727dc42f6aa103f4ff5afc Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 1 Feb 2013 19:20:03 +0100 Subject: [PATCH 030/209] cfg80211: fix BSS list hidden SSID lookup When trying to find a hidden SSID, the lookup function is done wrong; the code is trying to combine the two lookups into one, and as a consequence doesn't always find the entry at all. To understand this, consider a case where multiple BSS entries with the same channel and BSSID exist but have different SSID length. Then comparing against the probe response SSID length is bound to cause problems since the hidden one might be either zeroed out or zero-length. To fix this we need to do two lookups for the two ways to hide SSIDs. Signed-off-by: Johannes Berg --- net/wireless/scan.c | 80 ++++++++++++++++++++++++++++++--------------- 1 file changed, 53 insertions(+), 27 deletions(-) diff --git a/net/wireless/scan.c b/net/wireless/scan.c index cfc4e1aa8dad..d4fe065eeb11 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -424,9 +424,21 @@ static int cmp_bss_core(struct cfg80211_bss *a, struct cfg80211_bss *b) return memcmp(a->bssid, b->bssid, sizeof(a->bssid)); } +/** + * enum bss_compare_mode - BSS compare mode + * @BSS_CMP_REGULAR: regular compare mode (for insertion and normal find) + * @BSS_CMP_HIDE_ZLEN: find hidden SSID with zero-length mode + * @BSS_CMP_HIDE_NUL: find hidden SSID with NUL-ed out mode + */ +enum bss_compare_mode { + BSS_CMP_REGULAR, + BSS_CMP_HIDE_ZLEN, + BSS_CMP_HIDE_NUL, +}; + static int cmp_bss(struct cfg80211_bss *a, struct cfg80211_bss *b, - bool hide_ssid) + enum bss_compare_mode mode) { const struct cfg80211_bss_ies *a_ies, *b_ies; const u8 *ie1; @@ -462,27 +474,36 @@ static int cmp_bss(struct cfg80211_bss *a, if (!ie2) return 1; - /* zero-length SSID is used as an indication of the hidden bss */ - if (hide_ssid && !ie2[1]) - return 0; - - /* sort by length first, then by contents */ - if (ie1[1] != ie2[1]) - return ie2[1] - ie1[1]; - - if (!hide_ssid) + switch (mode) { + case BSS_CMP_HIDE_ZLEN: + /* + * In ZLEN mode we assume the BSS entry we're + * looking for has a zero-length SSID. So if + * the one we're looking at right now has that, + * return 0. Otherwise, return the difference + * in length, but since we're looking for the + * 0-length it's really equivalent to returning + * the length of the one we're looking at. + * + * No content comparison is needed as we assume + * the content length is zero. + */ + return ie2[1]; + case BSS_CMP_REGULAR: + default: + /* sort by length first, then by contents */ + if (ie1[1] != ie2[1]) + return ie2[1] - ie1[1]; return memcmp(ie1 + 2, ie2 + 2, ie1[1]); - - /* - * zeroed SSID ie is another indication of a hidden bss; - * if it isn't zeroed just return the regular sort value - * to find the next candidate - */ - for (i = 0; i < ie2[1]; i++) - if (ie2[i + 2]) - return memcmp(ie1 + 2, ie2 + 2, ie1[1]); - - return 0; + case BSS_CMP_HIDE_NUL: + if (ie1[1] != ie2[1]) + return ie2[1] - ie1[1]; + /* this is equivalent to memcmp(zeroes, ie2 + 2, len) */ + for (i = 0; i < ie2[1]; i++) + if (ie2[i + 2]) + return -1; + return 0; + } } struct cfg80211_bss *cfg80211_get_bss(struct wiphy *wiphy, @@ -564,7 +585,7 @@ static void rb_insert_bss(struct cfg80211_registered_device *dev, parent = *p; tbss = rb_entry(parent, struct cfg80211_internal_bss, rbn); - cmp = cmp_bss(&bss->pub, &tbss->pub, false); + cmp = cmp_bss(&bss->pub, &tbss->pub, BSS_CMP_REGULAR); if (WARN_ON(!cmp)) { /* will sort of leak this BSS */ @@ -584,7 +605,7 @@ static void rb_insert_bss(struct cfg80211_registered_device *dev, static struct cfg80211_internal_bss * rb_find_bss(struct cfg80211_registered_device *dev, struct cfg80211_internal_bss *res, - bool hidden) + enum bss_compare_mode mode) { struct rb_node *n = dev->bss_tree.rb_node; struct cfg80211_internal_bss *bss; @@ -592,7 +613,7 @@ rb_find_bss(struct cfg80211_registered_device *dev, while (n) { bss = rb_entry(n, struct cfg80211_internal_bss, rbn); - r = cmp_bss(&res->pub, &bss->pub, hidden); + r = cmp_bss(&res->pub, &bss->pub, mode); if (r == 0) return bss; @@ -642,7 +663,7 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev, return NULL; } - found = rb_find_bss(dev, tmp, false); + found = rb_find_bss(dev, tmp, BSS_CMP_REGULAR); if (found) { found->pub.beacon_interval = tmp->pub.beacon_interval; @@ -697,9 +718,14 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev, /* TODO: The code is not trying to update existing probe * response bss entries when beacon ies are * getting changed. */ - hidden = rb_find_bss(dev, tmp, true); - if (hidden) + hidden = rb_find_bss(dev, tmp, BSS_CMP_HIDE_ZLEN); + if (hidden) { copy_hidden_ies(tmp, hidden); + } else { + hidden = rb_find_bss(dev, tmp, BSS_CMP_HIDE_NUL); + if (hidden) + copy_hidden_ies(tmp, hidden); + } /* * create a copy -- the "res" variable that is passed in From 3af6341c5378d1ed0905614575ee9ee2e5522c81 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 30 Jan 2013 00:40:20 +0100 Subject: [PATCH 031/209] cfg80211: simplify mesh BSS comparison Instead of first checking if a BSS is an MBSS and then doing the comparisons, inline it all into the BSS comparison function. This avoids doing the IE searches twice and is also a lot less code. Signed-off-by: Johannes Berg --- net/wireless/scan.c | 120 ++++++++++++++------------------------------ 1 file changed, 39 insertions(+), 81 deletions(-) diff --git a/net/wireless/scan.c b/net/wireless/scan.c index d4fe065eeb11..1435b97b1ca2 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -288,26 +288,6 @@ const u8 *cfg80211_find_vendor_ie(unsigned int oui, u8 oui_type, } EXPORT_SYMBOL(cfg80211_find_vendor_ie); -static int cmp_ies(u8 num, const u8 *ies1, int len1, const u8 *ies2, int len2) -{ - const u8 *ie1 = cfg80211_find_ie(num, ies1, len1); - const u8 *ie2 = cfg80211_find_ie(num, ies2, len2); - - /* equal if both missing */ - if (!ie1 && !ie2) - return 0; - /* sort missing IE before (left of) present IE */ - if (!ie1) - return -1; - if (!ie2) - return 1; - - /* sort by length first, then by contents */ - if (ie1[1] != ie2[1]) - return ie2[1] - ie1[1]; - return memcmp(ie1 + 2, ie2 + 2, ie1[1]); -} - static bool is_bss(struct cfg80211_bss *a, const u8 *bssid, const u8 *ssid, size_t ssid_len) { @@ -331,29 +311,6 @@ static bool is_bss(struct cfg80211_bss *a, const u8 *bssid, return memcmp(ssidie + 2, ssid, ssid_len) == 0; } -static bool is_mesh_bss(struct cfg80211_bss *a) -{ - const struct cfg80211_bss_ies *ies; - const u8 *ie; - - if (!WLAN_CAPABILITY_IS_STA_BSS(a->capability)) - return false; - - ies = rcu_access_pointer(a->ies); - if (!ies) - return false; - - ie = cfg80211_find_ie(WLAN_EID_MESH_ID, ies->data, ies->len); - if (!ie) - return false; - - ie = cfg80211_find_ie(WLAN_EID_MESH_CONFIG, ies->data, ies->len); - if (!ie) - return false; - - return true; -} - static bool is_mesh(struct cfg80211_bss *a, const u8 *meshid, size_t meshidlen, const u8 *meshcfg) @@ -391,39 +348,6 @@ static bool is_mesh(struct cfg80211_bss *a, sizeof(struct ieee80211_meshconf_ie) - 2) == 0; } -static int cmp_bss_core(struct cfg80211_bss *a, struct cfg80211_bss *b) -{ - const struct cfg80211_bss_ies *a_ies, *b_ies; - int r; - - if (a->channel != b->channel) - return b->channel->center_freq - a->channel->center_freq; - - if (is_mesh_bss(a) && is_mesh_bss(b)) { - a_ies = rcu_access_pointer(a->ies); - if (!a_ies) - return -1; - b_ies = rcu_access_pointer(b->ies); - if (!b_ies) - return 1; - - r = cmp_ies(WLAN_EID_MESH_ID, - a_ies->data, a_ies->len, - b_ies->data, b_ies->len); - if (r) - return r; - return cmp_ies(WLAN_EID_MESH_CONFIG, - a_ies->data, a_ies->len, - b_ies->data, b_ies->len); - } - - /* - * we can't use compare_ether_addr here since we need a < > operator. - * The binary return value of compare_ether_addr isn't enough - */ - return memcmp(a->bssid, b->bssid, sizeof(a->bssid)); -} - /** * enum bss_compare_mode - BSS compare mode * @BSS_CMP_REGULAR: regular compare mode (for insertion and normal find) @@ -441,13 +365,12 @@ static int cmp_bss(struct cfg80211_bss *a, enum bss_compare_mode mode) { const struct cfg80211_bss_ies *a_ies, *b_ies; - const u8 *ie1; - const u8 *ie2; + const u8 *ie1 = NULL; + const u8 *ie2 = NULL; int i, r; - r = cmp_bss_core(a, b); - if (r) - return r; + if (a->channel != b->channel) + return b->channel->center_freq - a->channel->center_freq; a_ies = rcu_access_pointer(a->ies); if (!a_ies) @@ -456,6 +379,41 @@ static int cmp_bss(struct cfg80211_bss *a, if (!b_ies) return 1; + if (WLAN_CAPABILITY_IS_STA_BSS(a->capability)) + ie1 = cfg80211_find_ie(WLAN_EID_MESH_ID, + a_ies->data, a_ies->len); + if (WLAN_CAPABILITY_IS_STA_BSS(b->capability)) + ie2 = cfg80211_find_ie(WLAN_EID_MESH_ID, + b_ies->data, b_ies->len); + if (ie1 && ie2) { + int mesh_id_cmp; + + if (ie1[1] == ie2[1]) + mesh_id_cmp = memcmp(ie1 + 2, ie2 + 2, ie1[1]); + else + mesh_id_cmp = ie2[1] - ie1[1]; + + ie1 = cfg80211_find_ie(WLAN_EID_MESH_CONFIG, + a_ies->data, a_ies->len); + ie2 = cfg80211_find_ie(WLAN_EID_MESH_CONFIG, + b_ies->data, b_ies->len); + if (ie1 && ie2) { + if (mesh_id_cmp) + return mesh_id_cmp; + if (ie1[1] != ie2[1]) + return ie2[1] - ie1[1]; + return memcmp(ie1 + 2, ie2 + 2, ie1[1]); + } + } + + /* + * we can't use compare_ether_addr here since we need a < > operator. + * The binary return value of compare_ether_addr isn't enough + */ + r = memcmp(a->bssid, b->bssid, sizeof(a->bssid)); + if (r) + return r; + ie1 = cfg80211_find_ie(WLAN_EID_SSID, a_ies->data, a_ies->len); ie2 = cfg80211_find_ie(WLAN_EID_SSID, b_ies->data, b_ies->len); From 37e0838117084eb957fdf124bf555f4b9933a5a5 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 30 Jan 2013 08:50:37 +0100 Subject: [PATCH 032/209] cfg80211: remove unused cfg80211_get_mesh As Thomas pointed out, cfg80211_get_mesh() is unused and can be removed. Cc: Thomas Pedersen Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 4 --- net/wireless/scan.c | 65 ------------------------------------------ 2 files changed, 69 deletions(-) diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 94a0810ef68e..3ec70e1681d3 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -3164,10 +3164,6 @@ cfg80211_get_ibss(struct wiphy *wiphy, WLAN_CAPABILITY_IBSS, WLAN_CAPABILITY_IBSS); } -struct cfg80211_bss *cfg80211_get_mesh(struct wiphy *wiphy, - struct ieee80211_channel *channel, - const u8 *meshid, size_t meshidlen, - const u8 *meshcfg); /** * cfg80211_ref_bss - reference BSS struct * @bss: the BSS struct to reference diff --git a/net/wireless/scan.c b/net/wireless/scan.c index 1435b97b1ca2..3772638714fa 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -311,43 +311,6 @@ static bool is_bss(struct cfg80211_bss *a, const u8 *bssid, return memcmp(ssidie + 2, ssid, ssid_len) == 0; } -static bool is_mesh(struct cfg80211_bss *a, - const u8 *meshid, size_t meshidlen, - const u8 *meshcfg) -{ - const struct cfg80211_bss_ies *ies; - const u8 *ie; - - if (!WLAN_CAPABILITY_IS_STA_BSS(a->capability)) - return false; - - ies = rcu_access_pointer(a->ies); - if (!ies) - return false; - - ie = cfg80211_find_ie(WLAN_EID_MESH_ID, ies->data, ies->len); - if (!ie) - return false; - if (ie[1] != meshidlen) - return false; - if (memcmp(ie + 2, meshid, meshidlen)) - return false; - - ie = cfg80211_find_ie(WLAN_EID_MESH_CONFIG, ies->data, ies->len); - if (!ie) - return false; - if (ie[1] != sizeof(struct ieee80211_meshconf_ie)) - return false; - - /* - * Ignore mesh capability (last two bytes of the IE) when - * comparing since that may differ between stations taking - * part in the same mesh. - */ - return memcmp(ie + 2, meshcfg, - sizeof(struct ieee80211_meshconf_ie) - 2) == 0; -} - /** * enum bss_compare_mode - BSS compare mode * @BSS_CMP_REGULAR: regular compare mode (for insertion and normal find) @@ -503,34 +466,6 @@ struct cfg80211_bss *cfg80211_get_bss(struct wiphy *wiphy, } EXPORT_SYMBOL(cfg80211_get_bss); -struct cfg80211_bss *cfg80211_get_mesh(struct wiphy *wiphy, - struct ieee80211_channel *channel, - const u8 *meshid, size_t meshidlen, - const u8 *meshcfg) -{ - struct cfg80211_registered_device *dev = wiphy_to_dev(wiphy); - struct cfg80211_internal_bss *bss, *res = NULL; - - spin_lock_bh(&dev->bss_lock); - - list_for_each_entry(bss, &dev->bss_list, list) { - if (channel && bss->pub.channel != channel) - continue; - if (is_mesh(&bss->pub, meshid, meshidlen, meshcfg)) { - res = bss; - kref_get(&res->ref); - break; - } - } - - spin_unlock_bh(&dev->bss_lock); - if (!res) - return NULL; - return &res->pub; -} -EXPORT_SYMBOL(cfg80211_get_mesh); - - static void rb_insert_bss(struct cfg80211_registered_device *dev, struct cfg80211_internal_bss *bss) { From 3146a7da83ba2dd266ef436d4ac8e7e09bd15825 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 30 Jan 2013 09:03:08 +0100 Subject: [PATCH 033/209] mac80211: remove unused SSID from BSS The ssid/ssid_len fields in the private BSS struct are unused, contrary to the comment we do look up the SSID in the few cases we need it. Signed-off-by: Johannes Berg --- net/mac80211/ieee80211_i.h | 4 ---- 1 file changed, 4 deletions(-) diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 25a0647ada8f..8faf360e0b4c 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -86,10 +86,6 @@ struct ieee80211_fragment_entry { struct ieee80211_bss { - /* don't want to look up all the time */ - size_t ssid_len; - u8 ssid[IEEE80211_MAX_SSID_LEN]; - u32 device_ts; bool wmm_used; From 50521aa8817e3f6a77eb7aaabdbbb7b5c2fe0ea3 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 30 Jan 2013 21:33:19 +0100 Subject: [PATCH 034/209] cfg80211: fix BSS IE allocation comment The comment about allocating the IEs together with the BSS struct is no longer true, remove it. Also fix a typo in the same area. Signed-off-by: Johannes Berg --- net/wireless/scan.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/net/wireless/scan.c b/net/wireless/scan.c index 3772638714fa..34b47b30be88 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -715,11 +715,8 @@ cfg80211_inform_bss(struct wiphy *wiphy, * Response frame, we need to pick one of the options and only use it * with the driver that does not provide the full Beacon/Probe Response * frame. Use Beacon frame pointer to avoid indicating that this should - * override the iies pointer should we have received an earlier + * override the IEs pointer should we have received an earlier * indication of Probe Response data. - * - * The initial buffer for the IEs is allocated with the BSS entry and - * is located after the private area. */ ies = kmalloc(sizeof(*ies) + ielen, gfp); if (!ies) From 2ca813ad61136896c91a40194452ff665a522711 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 1 Feb 2013 01:04:14 +0100 Subject: [PATCH 035/209] cfg80211: move locking into cfg80211_bss_age There's no reason for it to require external locking, move it into the function. Signed-off-by: Johannes Berg --- net/wireless/scan.c | 3 ++- net/wireless/sysfs.c | 2 -- 2 files changed, 2 insertions(+), 3 deletions(-) diff --git a/net/wireless/scan.c b/net/wireless/scan.c index 34b47b30be88..1494d947e8dd 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -231,15 +231,16 @@ int __cfg80211_stop_sched_scan(struct cfg80211_registered_device *rdev, return 0; } -/* must hold dev->bss_lock! */ void cfg80211_bss_age(struct cfg80211_registered_device *dev, unsigned long age_secs) { struct cfg80211_internal_bss *bss; unsigned long age_jiffies = msecs_to_jiffies(age_secs * MSEC_PER_SEC); + spin_lock_bh(&dev->bss_lock); list_for_each_entry(bss, &dev->bss_list, list) bss->ts -= age_jiffies; + spin_unlock_bh(&dev->bss_lock); } void cfg80211_bss_expire(struct cfg80211_registered_device *dev) diff --git a/net/wireless/sysfs.c b/net/wireless/sysfs.c index 9bf6d5e32166..73bf39f11314 100644 --- a/net/wireless/sysfs.c +++ b/net/wireless/sysfs.c @@ -108,9 +108,7 @@ static int wiphy_resume(struct device *dev) int ret = 0; /* Age scan results with time spent in suspend */ - spin_lock_bh(&rdev->bss_lock); cfg80211_bss_age(rdev, get_seconds() - rdev->suspend_at); - spin_unlock_bh(&rdev->bss_lock); if (rdev->ops->resume) { rtnl_lock(); From e54faf29e07b6cc28a44a4f01d7fbc40905a67d3 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 29 Jan 2013 11:41:38 +0100 Subject: [PATCH 036/209] mac80211: allow transmitting deauth with tainted key When we had a connection for WoWLAN and after resume it needed to be disconnected, the previous commit enabled sending a deauth frame to the AP. This frame would not go through on MFP-enabled networks as the key for it is marked tainted before the frame is transmitted. Allow a tainted key to be used for deauth frames. Worst case, we'll use a wrong key because the PTK was rekeyed while suspended, but more likely the PTK is still fine and the taint flag really only applies to the GTK(s). Signed-off-by: Johannes Berg --- net/mac80211/tx.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index a2cb6a302cc7..7892b0a8873e 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -594,7 +594,8 @@ ieee80211_tx_h_select_key(struct ieee80211_tx_data *tx) break; } - if (unlikely(tx->key && tx->key->flags & KEY_FLAG_TAINTED)) + if (unlikely(tx->key && tx->key->flags & KEY_FLAG_TAINTED && + !ieee80211_is_deauth(hdr->frame_control))) return TX_DROP; if (!skip_hw && tx->key && From 6b684db1db0df40275c7dfcc32a5d48eb72fe4e3 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 29 Jan 2013 11:35:29 +0100 Subject: [PATCH 037/209] mac80211: send deauth if connection was lost during suspend If the driver determined the connection was lost or that it couldn't securely maintain the connection when coming out of WoWLAN, send a deauth frame to the AP to also let it know. Signed-off-by: Johannes Berg --- net/mac80211/mlme.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 5e188a5d812f..353b690900e9 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -2851,14 +2851,14 @@ static void ieee80211_sta_timer(unsigned long data) } static void ieee80211_sta_connection_lost(struct ieee80211_sub_if_data *sdata, - u8 *bssid, u8 reason) + u8 *bssid, u8 reason, bool tx) { struct ieee80211_local *local = sdata->local; struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN]; ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, reason, - false, frame_buf); + tx, frame_buf); mutex_unlock(&ifmgd->mtx); /* @@ -3107,7 +3107,8 @@ void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata) "No ack for nullfunc frame to AP %pM, disconnecting.\n", bssid); ieee80211_sta_connection_lost(sdata, bssid, - WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY); + WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, + false); } } else if (time_is_after_jiffies(ifmgd->probe_timeout)) run_again(ifmgd, ifmgd->probe_timeout); @@ -3116,7 +3117,7 @@ void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata) "Failed to send nullfunc to AP %pM after %dms, disconnecting\n", bssid, probe_wait_ms); ieee80211_sta_connection_lost(sdata, bssid, - WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY); + WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, false); } else if (ifmgd->probe_send_count < max_tries) { mlme_dbg(sdata, "No probe response from AP %pM after %dms, try %d/%i\n", @@ -3135,7 +3136,7 @@ void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata) bssid, probe_wait_ms); ieee80211_sta_connection_lost(sdata, bssid, - WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY); + WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, false); } } @@ -3242,7 +3243,8 @@ void ieee80211_sta_restart(struct ieee80211_sub_if_data *sdata) mlme_dbg(sdata, "driver requested disconnect after resume\n"); ieee80211_sta_connection_lost(sdata, ifmgd->associated->bssid, - WLAN_REASON_UNSPECIFIED); + WLAN_REASON_UNSPECIFIED, + true); mutex_unlock(&ifmgd->mtx); return; } From 4b1af4792a2aa686483fc9bb2155f7269fa6399c Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 1 Feb 2013 01:05:43 +0100 Subject: [PATCH 038/209] cfg80211: use lockdep to assert lock is held Instead of annotating with a comment, add a lockdep annotation which also serves as documentation. Signed-off-by: Johannes Berg --- net/wireless/scan.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/net/wireless/scan.c b/net/wireless/scan.c index 1494d947e8dd..a56287bb550c 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -41,22 +41,24 @@ static void bss_release(struct kref *ref) kfree(bss); } -/* must hold dev->bss_lock! */ static void __cfg80211_unlink_bss(struct cfg80211_registered_device *dev, struct cfg80211_internal_bss *bss) { + lockdep_assert_held(&dev->bss_lock); + list_del_init(&bss->list); rb_erase(&bss->rbn, &dev->bss_tree); kref_put(&bss->ref, bss_release); } -/* must hold dev->bss_lock! */ static void __cfg80211_bss_expire(struct cfg80211_registered_device *dev, unsigned long expire_time) { struct cfg80211_internal_bss *bss, *tmp; bool expired = false; + lockdep_assert_held(&dev->bss_lock); + list_for_each_entry_safe(bss, tmp, &dev->bss_list, list) { if (atomic_read(&bss->hold)) continue; From 9537f227b44762591a5598b79522789c573d34b3 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 1 Feb 2013 01:19:48 +0100 Subject: [PATCH 039/209] cfg80211: remove a local variable This local variable is only used once, so remove it. Signed-off-by: Johannes Berg --- net/wireless/scan.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/net/wireless/scan.c b/net/wireless/scan.c index a56287bb550c..23b7e59c6506 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -583,16 +583,15 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev, kfree_rcu((struct cfg80211_bss_ies *)old, rcu_head); } else if (rcu_access_pointer(tmp->pub.beacon_ies)) { - const struct cfg80211_bss_ies *old, *ies; + const struct cfg80211_bss_ies *old; old = rcu_access_pointer(found->pub.beacon_ies); - ies = rcu_access_pointer(found->pub.ies); rcu_assign_pointer(found->pub.beacon_ies, tmp->pub.beacon_ies); /* Override IEs if they were from a beacon before */ - if (old == ies) + if (old == rcu_access_pointer(found->pub.ies)) rcu_assign_pointer(found->pub.ies, tmp->pub.beacon_ies); From 0532d4f154b87da6361ab90d12f35142d5119dc1 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 1 Feb 2013 01:34:36 +0100 Subject: [PATCH 040/209] cfg80211: wrap BSS kref Add inline wrappers for the BSS struct krefs to be able to extend them easily later. Signed-off-by: Johannes Berg --- net/wireless/scan.c | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-) diff --git a/net/wireless/scan.c b/net/wireless/scan.c index 23b7e59c6506..36daacb31788 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -41,6 +41,16 @@ static void bss_release(struct kref *ref) kfree(bss); } +static inline void bss_ref_get(struct cfg80211_internal_bss *bss) +{ + kref_get(&bss->ref); +} + +static inline void bss_ref_put(struct cfg80211_internal_bss *bss) +{ + kref_put(&bss->ref, bss_release); +} + static void __cfg80211_unlink_bss(struct cfg80211_registered_device *dev, struct cfg80211_internal_bss *bss) { @@ -48,7 +58,7 @@ static void __cfg80211_unlink_bss(struct cfg80211_registered_device *dev, list_del_init(&bss->list); rb_erase(&bss->rbn, &dev->bss_tree); - kref_put(&bss->ref, bss_release); + bss_ref_put(bss); } static void __cfg80211_bss_expire(struct cfg80211_registered_device *dev, @@ -456,7 +466,7 @@ struct cfg80211_bss *cfg80211_get_bss(struct wiphy *wiphy, continue; if (is_bss(&bss->pub, bssid, ssid, ssid_len)) { res = bss; - kref_get(&res->ref); + bss_ref_get(res); break; } } @@ -649,7 +659,7 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev, dev->bss_generation++; spin_unlock_bh(&dev->bss_lock); - kref_get(&found->ref); + bss_ref_get(found); return found; } @@ -816,7 +826,7 @@ void cfg80211_ref_bss(struct cfg80211_bss *pub) return; bss = container_of(pub, struct cfg80211_internal_bss, pub); - kref_get(&bss->ref); + bss_ref_get(bss); } EXPORT_SYMBOL(cfg80211_ref_bss); @@ -828,7 +838,7 @@ void cfg80211_put_bss(struct cfg80211_bss *pub) return; bss = container_of(pub, struct cfg80211_internal_bss, pub); - kref_put(&bss->ref, bss_release); + bss_ref_put(bss); } EXPORT_SYMBOL(cfg80211_put_bss); From 3f52b7e328c526fa7a592af9bf5772c591ed38a4 Mon Sep 17 00:00:00 2001 From: Marco Porsch Date: Wed, 30 Jan 2013 18:14:08 +0100 Subject: [PATCH 041/209] mac80211: mesh power save basics Add routines to - maintain a PS mode for each peer and a non-peer PS mode - indicate own PS mode in transmitted frames - track neighbor STAs power modes - buffer frames when neighbors are in PS mode - add TIM and Awake Window IE to beacons - release frames in Mesh Peer Service Periods Add local_pm to sta_info to represent the link-specific power mode at this station towards the remote station. When a peer link is established, use the default power mode stored in mesh config. Update the PS status if the peering status of a neighbor changes. Maintain a mesh power mode for non-peer mesh STAs. Set the non-peer power mode to active mode during peering. Authenticated mesh peering is currently not working when either node is configured to be in power save mode. Indicate the current power mode in transmitted frames. Use QoS Nulls to indicate mesh power mode transitions. For performance reasons, calls to the function setting the frame flags are placed in HWMP routing routines, as there the STA pointer is already available. Add peer_pm to sta_info to represent the peer's link-specific power mode towards the local station. Add nonpeer_pm to represent the peer's power mode towards all non-peer stations. Track power modes based on received frames. Add the ps_data structure to ieee80211_if_mesh (for TIM map, PS neighbor counter and group-addressed frame buffer). Set WLAN_STA_PS flag for STA in PS mode to use the unicast frame buffering routines in the tx path. Update num_sta_ps to buffer and release group-addressed frames after DTIM beacons. Announce the awake window duration in beacons if in light or deep sleep mode towards any peer or non-peer. Create a TIM IE similarly to AP mode and add it to mesh beacons. Parse received Awake Window IEs and check TIM IEs for buffered frames. Release frames towards peers in mesh Peer Service Periods. Use the corresponding trigger frames and monitor the MPSP status. Append a QoS Null as trigger frame if neccessary to properly end the MPSP. Currently, in HT channels MPSPs behave imperfectly and show large delay spikes and frame losses. Signed-off-by: Marco Porsch Signed-off-by: Ivan Bezyazychnyy Signed-off-by: Mike Krinkin Signed-off-by: Max Filippov Signed-off-by: Johannes Berg --- include/linux/ieee80211.h | 8 + net/mac80211/Kconfig | 11 + net/mac80211/Makefile | 3 +- net/mac80211/cfg.c | 27 +- net/mac80211/debug.h | 10 + net/mac80211/debugfs_netdev.c | 5 + net/mac80211/debugfs_sta.c | 5 +- net/mac80211/ieee80211_i.h | 6 + net/mac80211/mesh.c | 33 ++ net/mac80211/mesh.h | 17 + net/mac80211/mesh_hwmp.c | 7 + net/mac80211/mesh_pathtbl.c | 1 + net/mac80211/mesh_plink.c | 17 + net/mac80211/mesh_ps.c | 585 ++++++++++++++++++++++++++++++++++ net/mac80211/rx.c | 7 + net/mac80211/sta_info.c | 20 +- net/mac80211/sta_info.h | 11 + net/mac80211/status.c | 7 + net/mac80211/tx.c | 31 +- net/mac80211/util.c | 4 + net/mac80211/wme.c | 13 +- 21 files changed, 811 insertions(+), 17 deletions(-) create mode 100644 net/mac80211/mesh_ps.c diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 11c8bc87fdcb..7e8a498efe6d 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -151,6 +151,11 @@ /* Mesh Control 802.11s */ #define IEEE80211_QOS_CTL_MESH_CONTROL_PRESENT 0x0100 +/* Mesh Power Save Level */ +#define IEEE80211_QOS_CTL_MESH_PS_LEVEL 0x0200 +/* Mesh Receiver Service Period Initiated */ +#define IEEE80211_QOS_CTL_RSPI 0x0400 + /* U-APSD queue for WMM IEs sent by AP */ #define IEEE80211_WMM_IE_AP_QOSINFO_UAPSD (1<<7) #define IEEE80211_WMM_IE_AP_QOSINFO_PARAM_SET_CNT_MASK 0x0f @@ -675,11 +680,14 @@ struct ieee80211_meshconf_ie { * @IEEE80211_MESHCONF_CAPAB_FORWARDING: the STA forwards MSDUs * @IEEE80211_MESHCONF_CAPAB_TBTT_ADJUSTING: TBTT adjustment procedure * is ongoing + * @IEEE80211_MESHCONF_CAPAB_POWER_SAVE_LEVEL: STA is in deep sleep mode or has + * neighbors in deep sleep mode */ enum mesh_config_capab_flags { IEEE80211_MESHCONF_CAPAB_ACCEPT_PLINKS = 0x01, IEEE80211_MESHCONF_CAPAB_FORWARDING = 0x08, IEEE80211_MESHCONF_CAPAB_TBTT_ADJUSTING = 0x20, + IEEE80211_MESHCONF_CAPAB_POWER_SAVE_LEVEL = 0x40, }; /** diff --git a/net/mac80211/Kconfig b/net/mac80211/Kconfig index b4ecf267a34b..0ecf947ad378 100644 --- a/net/mac80211/Kconfig +++ b/net/mac80211/Kconfig @@ -258,6 +258,17 @@ config MAC80211_MESH_SYNC_DEBUG Do not select this option. +config MAC80211_MESH_PS_DEBUG + bool "Verbose mesh powersave debugging" + depends on MAC80211_DEBUG_MENU + depends on MAC80211_MESH + ---help--- + Selecting this option causes mac80211 to print out very verbose mesh + powersave debugging messages (when mac80211 is taking part in a + mesh network). + + Do not select this option. + config MAC80211_TDLS_DEBUG bool "Verbose TDLS debugging" depends on MAC80211_DEBUG_MENU diff --git a/net/mac80211/Makefile b/net/mac80211/Makefile index 4911202334d9..9d7d840aac6d 100644 --- a/net/mac80211/Makefile +++ b/net/mac80211/Makefile @@ -39,7 +39,8 @@ mac80211-$(CONFIG_MAC80211_MESH) += \ mesh_pathtbl.o \ mesh_plink.o \ mesh_hwmp.o \ - mesh_sync.o + mesh_sync.o \ + mesh_ps.o mac80211-$(CONFIG_PM) += pm.o diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 661b878bd19c..f4f7e7691077 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -492,7 +492,10 @@ static void sta_set_sinfo(struct sta_info *sta, struct station_info *sinfo) #ifdef CONFIG_MAC80211_MESH sinfo->filled |= STATION_INFO_LLID | STATION_INFO_PLID | - STATION_INFO_PLINK_STATE; + STATION_INFO_PLINK_STATE | + STATION_INFO_LOCAL_PM | + STATION_INFO_PEER_PM | + STATION_INFO_NONPEER_PM; sinfo->llid = le16_to_cpu(sta->llid); sinfo->plid = le16_to_cpu(sta->plid); @@ -501,6 +504,9 @@ static void sta_set_sinfo(struct sta_info *sta, struct station_info *sinfo) sinfo->filled |= STATION_INFO_T_OFFSET; sinfo->t_offset = sta->t_offset; } + sinfo->local_pm = sta->local_pm; + sinfo->peer_pm = sta->peer_pm; + sinfo->nonpeer_pm = sta->nonpeer_pm; #endif } @@ -1262,6 +1268,10 @@ static int sta_apply_parameters(struct ieee80211_local *local, changed = mesh_plink_inc_estab_count( sdata); sta->plink_state = params->plink_state; + + ieee80211_mps_sta_status_update(sta); + ieee80211_mps_set_sta_local_pm(sta, + sdata->u.mesh.mshcfg.power_mode); break; case NL80211_PLINK_LISTEN: case NL80211_PLINK_BLOCKED: @@ -1273,6 +1283,9 @@ static int sta_apply_parameters(struct ieee80211_local *local, changed = mesh_plink_dec_estab_count( sdata); sta->plink_state = params->plink_state; + + ieee80211_mps_sta_status_update(sta); + ieee80211_mps_local_status_update(sdata); break; default: /* nothing */ @@ -1289,6 +1302,9 @@ static int sta_apply_parameters(struct ieee80211_local *local, break; } } + + if (params->local_pm) + ieee80211_mps_set_sta_local_pm(sta, params->local_pm); #endif } @@ -1777,6 +1793,15 @@ static int ieee80211_update_mesh_config(struct wiphy *wiphy, if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL, mask)) conf->dot11MeshHWMPconfirmationInterval = nconf->dot11MeshHWMPconfirmationInterval; + if (_chg_mesh_attr(NL80211_MESHCONF_POWER_MODE, mask)) { + conf->power_mode = nconf->power_mode; + ieee80211_mps_local_status_update(sdata); + } + if (_chg_mesh_attr(NL80211_MESHCONF_AWAKE_WINDOW, mask)) { + conf->dot11MeshAwakeWindowDuration = + nconf->dot11MeshAwakeWindowDuration; + ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON); + } return 0; } diff --git a/net/mac80211/debug.h b/net/mac80211/debug.h index 8f383a576016..4ccc5ed6237d 100644 --- a/net/mac80211/debug.h +++ b/net/mac80211/debug.h @@ -44,6 +44,12 @@ #define MAC80211_MESH_SYNC_DEBUG 0 #endif +#ifdef CONFIG_MAC80211_MESH_PS_DEBUG +#define MAC80211_MESH_PS_DEBUG 1 +#else +#define MAC80211_MESH_PS_DEBUG 0 +#endif + #ifdef CONFIG_MAC80211_TDLS_DEBUG #define MAC80211_TDLS_DEBUG 1 #else @@ -151,6 +157,10 @@ do { \ _sdata_dbg(MAC80211_MESH_SYNC_DEBUG, \ sdata, fmt, ##__VA_ARGS__) +#define mps_dbg(sdata, fmt, ...) \ + _sdata_dbg(MAC80211_MESH_PS_DEBUG, \ + sdata, fmt, ##__VA_ARGS__) + #define tdls_dbg(sdata, fmt, ...) \ _sdata_dbg(MAC80211_TDLS_DEBUG, \ sdata, fmt, ##__VA_ARGS__) diff --git a/net/mac80211/debugfs_netdev.c b/net/mac80211/debugfs_netdev.c index cbde5cc49a40..059bbb82e84f 100644 --- a/net/mac80211/debugfs_netdev.c +++ b/net/mac80211/debugfs_netdev.c @@ -515,6 +515,9 @@ IEEE80211_IF_FILE(dot11MeshHWMProotInterval, u.mesh.mshcfg.dot11MeshHWMProotInterval, DEC); IEEE80211_IF_FILE(dot11MeshHWMPconfirmationInterval, u.mesh.mshcfg.dot11MeshHWMPconfirmationInterval, DEC); +IEEE80211_IF_FILE(power_mode, u.mesh.mshcfg.power_mode, DEC); +IEEE80211_IF_FILE(dot11MeshAwakeWindowDuration, + u.mesh.mshcfg.dot11MeshAwakeWindowDuration, DEC); #endif #define DEBUGFS_ADD_MODE(name, mode) \ @@ -620,6 +623,8 @@ static void add_mesh_config(struct ieee80211_sub_if_data *sdata) MESHPARAMS_ADD(dot11MeshHWMPactivePathToRootTimeout); MESHPARAMS_ADD(dot11MeshHWMProotInterval); MESHPARAMS_ADD(dot11MeshHWMPconfirmationInterval); + MESHPARAMS_ADD(power_mode); + MESHPARAMS_ADD(dot11MeshAwakeWindowDuration); #undef MESHPARAMS_ADD } #endif diff --git a/net/mac80211/debugfs_sta.c b/net/mac80211/debugfs_sta.c index 6fb1168b9f16..c7591f73dbc3 100644 --- a/net/mac80211/debugfs_sta.c +++ b/net/mac80211/debugfs_sta.c @@ -65,7 +65,7 @@ static ssize_t sta_flags_read(struct file *file, char __user *userbuf, test_sta_flag(sta, WLAN_STA_##flg) ? #flg "\n" : "" int res = scnprintf(buf, sizeof(buf), - "%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s", + "%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s", TEST(AUTH), TEST(ASSOC), TEST(PS_STA), TEST(PS_DRIVER), TEST(AUTHORIZED), TEST(SHORT_PREAMBLE), @@ -74,7 +74,8 @@ static ssize_t sta_flags_read(struct file *file, char __user *userbuf, TEST(UAPSD), TEST(SP), TEST(TDLS_PEER), TEST(TDLS_PEER_AUTH), TEST(4ADDR_EVENT), TEST(INSERTED), TEST(RATE_CONTROL), - TEST(TOFFSET_KNOWN)); + TEST(TOFFSET_KNOWN), TEST(MPSP_OWNER), + TEST(MPSP_RECIPIENT)); #undef TEST return simple_read_from_buffer(userbuf, count, ppos, buf, res); } diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 8faf360e0b4c..5fe9db707880 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -590,6 +590,11 @@ struct ieee80211_if_mesh { s64 sync_offset_clockdrift_max; spinlock_t sync_offset_lock; bool adjusting_tbtt; + /* mesh power save */ + enum nl80211_mesh_power_mode nonpeer_pm; + int ps_peers_light_sleep; + int ps_peers_deep_sleep; + struct ps_data ps; }; #ifdef CONFIG_MAC80211_MESH @@ -1185,6 +1190,7 @@ struct ieee802_11_elems { struct ieee80211_meshconf_ie *mesh_config; u8 *mesh_id; u8 *peering; + __le16 *awake_window; u8 *preq; u8 *prep; u8 *perr; diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index f920da1201ab..35ac38871420 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -261,6 +261,9 @@ mesh_add_meshconf_ie(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata) *pos = IEEE80211_MESHCONF_CAPAB_FORWARDING; *pos |= ifmsh->accepting_plinks ? IEEE80211_MESHCONF_CAPAB_ACCEPT_PLINKS : 0x00; + /* Mesh PS mode. See IEEE802.11-2012 8.4.2.100.8 */ + *pos |= ifmsh->ps_peers_deep_sleep ? + IEEE80211_MESHCONF_CAPAB_POWER_SAVE_LEVEL : 0x00; *pos++ |= ifmsh->adjusting_tbtt ? IEEE80211_MESHCONF_CAPAB_TBTT_ADJUSTING : 0x00; *pos++ = 0x00; @@ -286,6 +289,29 @@ mesh_add_meshid_ie(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata) return 0; } +int mesh_add_awake_window_ie(struct sk_buff *skb, + struct ieee80211_sub_if_data *sdata) +{ + struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; + u8 *pos; + + /* see IEEE802.11-2012 13.14.6 */ + if (ifmsh->ps_peers_light_sleep == 0 && + ifmsh->ps_peers_deep_sleep == 0 && + ifmsh->nonpeer_pm == NL80211_MESH_POWER_ACTIVE) + return 0; + + if (skb_tailroom(skb) < 4) + return -ENOMEM; + + pos = skb_put(skb, 2 + 2); + *pos++ = WLAN_EID_MESH_AWAKE_WINDOW; + *pos++ = 2; + put_unaligned_le16(ifmsh->mshcfg.dot11MeshAwakeWindowDuration, pos); + + return 0; +} + int mesh_add_vendor_ies(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata) { @@ -629,6 +655,8 @@ void ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata) sdata->vif.bss_conf.basic_rates = ieee80211_mandatory_rates(local, band); + ieee80211_mps_local_status_update(sdata); + ieee80211_bss_info_change_notify(sdata, changed); netif_carrier_on(sdata->dev); @@ -651,6 +679,10 @@ void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata) sta_info_flush(sdata); mesh_path_flush_by_iface(sdata); + /* free all potentially still buffered group-addressed frames */ + local->total_ps_buffered -= skb_queue_len(&ifmsh->ps.bc_buf); + skb_queue_purge(&ifmsh->ps.bc_buf); + del_timer_sync(&sdata->u.mesh.housekeeping_timer); del_timer_sync(&sdata->u.mesh.mesh_path_root_timer); del_timer_sync(&sdata->u.mesh.mesh_path_timer); @@ -828,6 +860,7 @@ void ieee80211_mesh_init_sdata(struct ieee80211_sub_if_data *sdata) ieee80211_mesh_path_root_timer, (unsigned long) sdata); INIT_LIST_HEAD(&ifmsh->preq_queue.list); + skb_queue_head_init(&ifmsh->ps.bc_buf); spin_lock_init(&ifmsh->mesh_preq_queue_lock); spin_lock_init(&ifmsh->sync_offset_lock); diff --git a/net/mac80211/mesh.h b/net/mac80211/mesh.h index aff301544c7f..eb336253b6b3 100644 --- a/net/mac80211/mesh.h +++ b/net/mac80211/mesh.h @@ -222,6 +222,8 @@ int mesh_add_meshid_ie(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata); int mesh_add_rsn_ie(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata); +int mesh_add_awake_window_ie(struct sk_buff *skb, + struct ieee80211_sub_if_data *sdata); int mesh_add_vendor_ies(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata); int mesh_add_ds_params_ie(struct sk_buff *skb, @@ -242,6 +244,21 @@ void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata); void ieee80211_mesh_root_setup(struct ieee80211_if_mesh *ifmsh); const struct ieee80211_mesh_sync_ops *ieee80211_mesh_sync_ops_get(u8 method); +/* mesh power save */ +void ieee80211_mps_local_status_update(struct ieee80211_sub_if_data *sdata); +void ieee80211_mps_set_sta_local_pm(struct sta_info *sta, + enum nl80211_mesh_power_mode pm); +void ieee80211_mps_set_frame_flags(struct ieee80211_sub_if_data *sdata, + struct sta_info *sta, + struct ieee80211_hdr *hdr); +void ieee80211_mps_sta_status_update(struct sta_info *sta); +void ieee80211_mps_rx_h_sta_process(struct sta_info *sta, + struct ieee80211_hdr *hdr); +void ieee80211_mpsp_trigger_process(u8 *qc, struct sta_info *sta, + bool tx, bool acked); +void ieee80211_mps_frame_release(struct sta_info *sta, + struct ieee802_11_elems *elems); + /* Mesh paths */ int mesh_nexthop_lookup(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata); diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c index 6b4603a90031..f0dd8742ed42 100644 --- a/net/mac80211/mesh_hwmp.c +++ b/net/mac80211/mesh_hwmp.c @@ -205,6 +205,7 @@ static void prepare_frame_for_deferred_tx(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb) { struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; skb_set_mac_header(skb, 0); skb_set_network_header(skb, 0); @@ -217,6 +218,7 @@ static void prepare_frame_for_deferred_tx(struct ieee80211_sub_if_data *sdata, info->control.vif = &sdata->vif; info->flags |= IEEE80211_TX_INTFL_NEED_TXPROCESSING; ieee80211_set_qos_hdr(sdata, skb); + ieee80211_mps_set_frame_flags(sdata, NULL, hdr); } /** @@ -1080,6 +1082,10 @@ int mesh_nexthop_resolve(struct sk_buff *skb, u8 *target_addr = hdr->addr3; int err = 0; + /* Nulls are only sent to peers for PS and should be pre-addressed */ + if (ieee80211_is_qos_nullfunc(hdr->frame_control)) + return 0; + rcu_read_lock(); err = mesh_nexthop_lookup(skb, sdata); if (!err) @@ -1151,6 +1157,7 @@ int mesh_nexthop_lookup(struct sk_buff *skb, if (next_hop) { memcpy(hdr->addr1, next_hop->sta.addr, ETH_ALEN); memcpy(hdr->addr2, sdata->vif.addr, ETH_ALEN); + ieee80211_mps_set_frame_flags(sdata, next_hop, hdr); err = 0; } diff --git a/net/mac80211/mesh_pathtbl.c b/net/mac80211/mesh_pathtbl.c index aa749818860e..d5786c3eaee2 100644 --- a/net/mac80211/mesh_pathtbl.c +++ b/net/mac80211/mesh_pathtbl.c @@ -212,6 +212,7 @@ void mesh_path_assign_nexthop(struct mesh_path *mpath, struct sta_info *sta) hdr = (struct ieee80211_hdr *) skb->data; memcpy(hdr->addr1, sta->sta.addr, ETH_ALEN); memcpy(hdr->addr2, mpath->sdata->vif.addr, ETH_ALEN); + ieee80211_mps_set_frame_flags(sta->sdata, sta, hdr); } spin_unlock_irqrestore(&mpath->frame_queue.lock, flags); diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c index 6787d696d94c..fe7c3334d6fe 100644 --- a/net/mac80211/mesh_plink.c +++ b/net/mac80211/mesh_plink.c @@ -201,6 +201,9 @@ static u32 __mesh_plink_deactivate(struct sta_info *sta) sta->plink_state = NL80211_PLINK_BLOCKED; mesh_path_flush_by_nexthop(sta); + ieee80211_mps_sta_status_update(sta); + ieee80211_mps_local_status_update(sdata); + return changed; } @@ -503,6 +506,7 @@ void mesh_neighbour_update(struct ieee80211_sub_if_data *sdata, rssi_threshold_check(sta, sdata)) mesh_plink_open(sta); + ieee80211_mps_frame_release(sta, elems); out: rcu_read_unlock(); } @@ -633,6 +637,9 @@ int mesh_plink_open(struct sta_info *sta) "Mesh plink: starting establishment with %pM\n", sta->sta.addr); + /* set the non-peer mode to active during peering */ + ieee80211_mps_local_status_update(sdata); + return mesh_plink_frame_tx(sdata, WLAN_SP_MESH_PEERING_OPEN, sta->sta.addr, llid, 0, 0); } @@ -866,6 +873,10 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m sta->llid = llid; mesh_plink_timer_set(sta, mshcfg->dot11MeshRetryTimeout); + + /* set the non-peer mode to active during peering */ + ieee80211_mps_local_status_update(sdata); + spin_unlock_bh(&sta->lock); mesh_plink_frame_tx(sdata, WLAN_SP_MESH_PEERING_OPEN, @@ -959,6 +970,9 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m changed |= mesh_set_short_slot_time(sdata); mpl_dbg(sdata, "Mesh plink with %pM ESTABLISHED\n", sta->sta.addr); + ieee80211_mps_sta_status_update(sta); + ieee80211_mps_set_sta_local_pm(sta, + mshcfg->power_mode); break; default: spin_unlock_bh(&sta->lock); @@ -998,6 +1012,9 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m mesh_plink_frame_tx(sdata, WLAN_SP_MESH_PEERING_CONFIRM, sta->sta.addr, llid, plid, 0); + ieee80211_mps_sta_status_update(sta); + ieee80211_mps_set_sta_local_pm(sta, + mshcfg->power_mode); break; default: spin_unlock_bh(&sta->lock); diff --git a/net/mac80211/mesh_ps.c b/net/mac80211/mesh_ps.c new file mode 100644 index 000000000000..b677962525ed --- /dev/null +++ b/net/mac80211/mesh_ps.c @@ -0,0 +1,585 @@ +/* + * Copyright 2012-2013, Marco Porsch + * Copyright 2012-2013, cozybit Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "mesh.h" +#include "wme.h" + + +/* mesh PS management */ + +/** + * mps_qos_null_get - create pre-addressed QoS Null frame for mesh powersave + */ +static struct sk_buff *mps_qos_null_get(struct sta_info *sta) +{ + struct ieee80211_sub_if_data *sdata = sta->sdata; + struct ieee80211_local *local = sdata->local; + struct ieee80211_hdr *nullfunc; /* use 4addr header */ + struct sk_buff *skb; + int size = sizeof(*nullfunc); + __le16 fc; + + skb = dev_alloc_skb(local->hw.extra_tx_headroom + size + 2); + if (!skb) + return NULL; + skb_reserve(skb, local->hw.extra_tx_headroom); + + nullfunc = (struct ieee80211_hdr *) skb_put(skb, size); + fc = cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_QOS_NULLFUNC); + ieee80211_fill_mesh_addresses(nullfunc, &fc, sta->sta.addr, + sdata->vif.addr); + nullfunc->frame_control = fc; + nullfunc->duration_id = 0; + /* no address resolution for this frame -> set addr 1 immediately */ + memcpy(nullfunc->addr1, sta->sta.addr, ETH_ALEN); + memset(skb_put(skb, 2), 0, 2); /* append QoS control field */ + ieee80211_mps_set_frame_flags(sdata, sta, nullfunc); + + return skb; +} + +/** + * mps_qos_null_tx - send a QoS Null to indicate link-specific power mode + */ +static void mps_qos_null_tx(struct sta_info *sta) +{ + struct sk_buff *skb; + + skb = mps_qos_null_get(sta); + if (!skb) + return; + + mps_dbg(sta->sdata, "announcing peer-specific power mode to %pM\n", + sta->sta.addr); + + /* don't unintentionally start a MPSP */ + if (!test_sta_flag(sta, WLAN_STA_PS_STA)) { + u8 *qc = ieee80211_get_qos_ctl((void *) skb->data); + + qc[0] |= IEEE80211_QOS_CTL_EOSP; + } + + ieee80211_tx_skb(sta->sdata, skb); +} + +/** + * ieee80211_mps_local_status_update - track status of local link-specific PMs + * + * @sdata: local mesh subif + * + * sets the non-peer power mode and triggers the driver PS (re-)configuration + */ +void ieee80211_mps_local_status_update(struct ieee80211_sub_if_data *sdata) +{ + struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; + struct sta_info *sta; + bool peering = false; + int light_sleep_cnt = 0; + int deep_sleep_cnt = 0; + + rcu_read_lock(); + list_for_each_entry_rcu(sta, &sdata->local->sta_list, list) { + if (sdata != sta->sdata) + continue; + + switch (sta->plink_state) { + case NL80211_PLINK_OPN_SNT: + case NL80211_PLINK_OPN_RCVD: + case NL80211_PLINK_CNF_RCVD: + peering = true; + break; + case NL80211_PLINK_ESTAB: + if (sta->local_pm == NL80211_MESH_POWER_LIGHT_SLEEP) + light_sleep_cnt++; + else if (sta->local_pm == NL80211_MESH_POWER_DEEP_SLEEP) + deep_sleep_cnt++; + break; + default: + break; + } + } + rcu_read_unlock(); + + /* + * Set non-peer mode to active during peering/scanning/authentication + * (see IEEE802.11-2012 13.14.8.3). The non-peer mesh power mode is + * deep sleep if the local STA is in light or deep sleep towards at + * least one mesh peer (see 13.14.3.1). Otherwise, set it to the + * user-configured default value. + */ + if (peering) { + mps_dbg(sdata, "setting non-peer PM to active for peering\n"); + ifmsh->nonpeer_pm = NL80211_MESH_POWER_ACTIVE; + } else if (light_sleep_cnt || deep_sleep_cnt) { + mps_dbg(sdata, "setting non-peer PM to deep sleep\n"); + ifmsh->nonpeer_pm = NL80211_MESH_POWER_DEEP_SLEEP; + } else { + mps_dbg(sdata, "setting non-peer PM to user value\n"); + ifmsh->nonpeer_pm = ifmsh->mshcfg.power_mode; + } + + ifmsh->ps_peers_light_sleep = light_sleep_cnt; + ifmsh->ps_peers_deep_sleep = deep_sleep_cnt; +} + +/** + * ieee80211_mps_set_sta_local_pm - set local PM towards a mesh STA + * + * @sta: mesh STA + * @pm: the power mode to set + */ +void ieee80211_mps_set_sta_local_pm(struct sta_info *sta, + enum nl80211_mesh_power_mode pm) +{ + struct ieee80211_sub_if_data *sdata = sta->sdata; + + mps_dbg(sdata, "local STA operates in mode %d with %pM\n", + pm, sta->sta.addr); + + sta->local_pm = pm; + + /* + * announce peer-specific power mode transition + * (see IEEE802.11-2012 13.14.3.2 and 13.14.3.3) + */ + if (sta->plink_state == NL80211_PLINK_ESTAB) + mps_qos_null_tx(sta); + + ieee80211_mps_local_status_update(sdata); +} + +/** + * ieee80211_mps_set_frame_flags - set mesh PS flags in FC (and QoS Control) + * + * @sdata: local mesh subif + * @sta: mesh STA + * @hdr: 802.11 frame header + * + * see IEEE802.11-2012 8.2.4.1.7 and 8.2.4.5.11 + * + * NOTE: sta must be given when an individually-addressed QoS frame header + * is handled, for group-addressed and management frames it is not used + */ +void ieee80211_mps_set_frame_flags(struct ieee80211_sub_if_data *sdata, + struct sta_info *sta, + struct ieee80211_hdr *hdr) +{ + enum nl80211_mesh_power_mode pm; + u8 *qc; + + if (WARN_ON(is_unicast_ether_addr(hdr->addr1) && + ieee80211_is_data_qos(hdr->frame_control) && + !sta)) + return; + + if (is_unicast_ether_addr(hdr->addr1) && + ieee80211_is_data_qos(hdr->frame_control) && + sta->plink_state == NL80211_PLINK_ESTAB) + pm = sta->local_pm; + else + pm = sdata->u.mesh.nonpeer_pm; + + if (pm == NL80211_MESH_POWER_ACTIVE) + hdr->frame_control &= cpu_to_le16(~IEEE80211_FCTL_PM); + else + hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM); + + if (!ieee80211_is_data_qos(hdr->frame_control)) + return; + + qc = ieee80211_get_qos_ctl(hdr); + + if ((is_unicast_ether_addr(hdr->addr1) && + pm == NL80211_MESH_POWER_DEEP_SLEEP) || + (is_multicast_ether_addr(hdr->addr1) && + sdata->u.mesh.ps_peers_deep_sleep > 0)) + qc[1] |= (IEEE80211_QOS_CTL_MESH_PS_LEVEL >> 8); + else + qc[1] &= ~(IEEE80211_QOS_CTL_MESH_PS_LEVEL >> 8); +} + +/** + * ieee80211_mps_sta_status_update - update buffering status of neighbor STA + * + * @sta: mesh STA + * + * called after change of peering status or non-peer/peer-specific power mode + */ +void ieee80211_mps_sta_status_update(struct sta_info *sta) +{ + enum nl80211_mesh_power_mode pm; + bool do_buffer; + + /* + * use peer-specific power mode if peering is established and the + * peer's power mode is known + */ + if (sta->plink_state == NL80211_PLINK_ESTAB && + sta->peer_pm != NL80211_MESH_POWER_UNKNOWN) + pm = sta->peer_pm; + else + pm = sta->nonpeer_pm; + + do_buffer = (pm != NL80211_MESH_POWER_ACTIVE); + + /* Don't let the same PS state be set twice */ + if (test_sta_flag(sta, WLAN_STA_PS_STA) == do_buffer) + return; + + if (do_buffer) { + set_sta_flag(sta, WLAN_STA_PS_STA); + atomic_inc(&sta->sdata->u.mesh.ps.num_sta_ps); + mps_dbg(sta->sdata, "start PS buffering frames towards %pM\n", + sta->sta.addr); + } else { + ieee80211_sta_ps_deliver_wakeup(sta); + } + + /* clear the MPSP flags for non-peers or active STA */ + if (sta->plink_state != NL80211_PLINK_ESTAB) { + clear_sta_flag(sta, WLAN_STA_MPSP_OWNER); + clear_sta_flag(sta, WLAN_STA_MPSP_RECIPIENT); + } else if (!do_buffer) { + clear_sta_flag(sta, WLAN_STA_MPSP_OWNER); + } +} + +static void mps_set_sta_peer_pm(struct sta_info *sta, + struct ieee80211_hdr *hdr) +{ + enum nl80211_mesh_power_mode pm; + u8 *qc = ieee80211_get_qos_ctl(hdr); + + /* + * Test Power Management field of frame control (PW) and + * mesh power save level subfield of QoS control field (PSL) + * + * | PM | PSL| Mesh PM | + * +----+----+---------+ + * | 0 |Rsrv| Active | + * | 1 | 0 | Light | + * | 1 | 1 | Deep | + */ + if (ieee80211_has_pm(hdr->frame_control)) { + if (qc[1] & (IEEE80211_QOS_CTL_MESH_PS_LEVEL >> 8)) + pm = NL80211_MESH_POWER_DEEP_SLEEP; + else + pm = NL80211_MESH_POWER_LIGHT_SLEEP; + } else { + pm = NL80211_MESH_POWER_ACTIVE; + } + + if (sta->peer_pm == pm) + return; + + mps_dbg(sta->sdata, "STA %pM enters mode %d\n", + sta->sta.addr, pm); + + sta->peer_pm = pm; + + ieee80211_mps_sta_status_update(sta); +} + +static void mps_set_sta_nonpeer_pm(struct sta_info *sta, + struct ieee80211_hdr *hdr) +{ + enum nl80211_mesh_power_mode pm; + + if (ieee80211_has_pm(hdr->frame_control)) + pm = NL80211_MESH_POWER_DEEP_SLEEP; + else + pm = NL80211_MESH_POWER_ACTIVE; + + if (sta->nonpeer_pm == pm) + return; + + mps_dbg(sta->sdata, "STA %pM sets non-peer mode to %d\n", + sta->sta.addr, pm); + + sta->nonpeer_pm = pm; + + ieee80211_mps_sta_status_update(sta); +} + +/** + * ieee80211_mps_rx_h_sta_process - frame receive handler for mesh powersave + * + * @sta: STA info that transmitted the frame + * @hdr: IEEE 802.11 (QoS) Header + */ +void ieee80211_mps_rx_h_sta_process(struct sta_info *sta, + struct ieee80211_hdr *hdr) +{ + if (is_unicast_ether_addr(hdr->addr1) && + ieee80211_is_data_qos(hdr->frame_control)) { + /* + * individually addressed QoS Data/Null frames contain + * peer link-specific PS mode towards the local STA + */ + mps_set_sta_peer_pm(sta, hdr); + + /* check for mesh Peer Service Period trigger frames */ + ieee80211_mpsp_trigger_process(ieee80211_get_qos_ctl(hdr), + sta, false, false); + } else { + /* + * can only determine non-peer PS mode + * (see IEEE802.11-2012 8.2.4.1.7) + */ + mps_set_sta_nonpeer_pm(sta, hdr); + } +} + + +/* mesh PS frame release */ + +static void mpsp_trigger_send(struct sta_info *sta, bool rspi, bool eosp) +{ + struct ieee80211_sub_if_data *sdata = sta->sdata; + struct sk_buff *skb; + struct ieee80211_hdr *nullfunc; + struct ieee80211_tx_info *info; + u8 *qc; + + skb = mps_qos_null_get(sta); + if (!skb) + return; + + nullfunc = (struct ieee80211_hdr *) skb->data; + if (!eosp) + nullfunc->frame_control |= + cpu_to_le16(IEEE80211_FCTL_MOREDATA); + /* + * | RSPI | EOSP | MPSP triggering | + * +------+------+--------------------+ + * | 0 | 0 | local STA is owner | + * | 0 | 1 | no MPSP (MPSP end) | + * | 1 | 0 | both STA are owner | + * | 1 | 1 | peer STA is owner | see IEEE802.11-2012 13.14.9.2 + */ + qc = ieee80211_get_qos_ctl(nullfunc); + if (rspi) + qc[1] |= (IEEE80211_QOS_CTL_RSPI >> 8); + if (eosp) + qc[0] |= IEEE80211_QOS_CTL_EOSP; + + info = IEEE80211_SKB_CB(skb); + + info->flags |= IEEE80211_TX_CTL_NO_PS_BUFFER | + IEEE80211_TX_CTL_REQ_TX_STATUS; + + mps_dbg(sdata, "sending MPSP trigger%s%s to %pM\n", + rspi ? " RSPI" : "", eosp ? " EOSP" : "", sta->sta.addr); + + ieee80211_tx_skb(sdata, skb); +} + +/** + * mpsp_qos_null_append - append QoS Null frame to MPSP skb queue if needed + * + * To properly end a mesh MPSP the last transmitted frame has to set the EOSP + * flag in the QoS Control field. In case the current tailing frame is not a + * QoS Data frame, append a QoS Null to carry the flag. + */ +static void mpsp_qos_null_append(struct sta_info *sta, + struct sk_buff_head *frames) +{ + struct ieee80211_sub_if_data *sdata = sta->sdata; + struct sk_buff *new_skb, *skb = skb_peek_tail(frames); + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; + struct ieee80211_tx_info *info; + + if (ieee80211_is_data_qos(hdr->frame_control)) + return; + + new_skb = mps_qos_null_get(sta); + if (!new_skb) + return; + + mps_dbg(sdata, "appending QoS Null in MPSP towards %pM\n", + sta->sta.addr); + /* + * This frame has to be transmitted last. Assign lowest priority to + * make sure it cannot pass other frames when releasing multiple ACs. + */ + new_skb->priority = 1; + skb_set_queue_mapping(new_skb, IEEE80211_AC_BK); + ieee80211_set_qos_hdr(sdata, new_skb); + + info = IEEE80211_SKB_CB(new_skb); + info->control.vif = &sdata->vif; + info->flags |= IEEE80211_TX_INTFL_NEED_TXPROCESSING; + + __skb_queue_tail(frames, new_skb); +} + +/** + * mps_frame_deliver - transmit frames during mesh powersave + * + * @sta: STA info to transmit to + * @n_frames: number of frames to transmit. -1 for all + */ +static void mps_frame_deliver(struct sta_info *sta, int n_frames) +{ + struct ieee80211_sub_if_data *sdata = sta->sdata; + struct ieee80211_local *local = sdata->local; + int ac; + struct sk_buff_head frames; + struct sk_buff *skb; + bool more_data = false; + + skb_queue_head_init(&frames); + + /* collect frame(s) from buffers */ + for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { + while (n_frames != 0) { + skb = skb_dequeue(&sta->tx_filtered[ac]); + if (!skb) { + skb = skb_dequeue( + &sta->ps_tx_buf[ac]); + if (skb) + local->total_ps_buffered--; + } + if (!skb) + break; + n_frames--; + __skb_queue_tail(&frames, skb); + } + + if (!skb_queue_empty(&sta->tx_filtered[ac]) || + !skb_queue_empty(&sta->ps_tx_buf[ac])) + more_data = true; + } + + /* nothing to send? -> EOSP */ + if (skb_queue_empty(&frames)) { + mpsp_trigger_send(sta, false, true); + return; + } + + /* in a MPSP make sure the last skb is a QoS Data frame */ + if (test_sta_flag(sta, WLAN_STA_MPSP_OWNER)) + mpsp_qos_null_append(sta, &frames); + + mps_dbg(sta->sdata, "sending %d frames to PS STA %pM\n", + skb_queue_len(&frames), sta->sta.addr); + + /* prepare collected frames for transmission */ + skb_queue_walk(&frames, skb) { + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + struct ieee80211_hdr *hdr = (void *) skb->data; + + /* + * Tell TX path to send this frame even though the + * STA may still remain is PS mode after this frame + * exchange. + */ + info->flags |= IEEE80211_TX_CTL_NO_PS_BUFFER; + + if (more_data || !skb_queue_is_last(&frames, skb)) + hdr->frame_control |= + cpu_to_le16(IEEE80211_FCTL_MOREDATA); + else + hdr->frame_control &= + cpu_to_le16(~IEEE80211_FCTL_MOREDATA); + + if (skb_queue_is_last(&frames, skb) && + ieee80211_is_data_qos(hdr->frame_control)) { + u8 *qoshdr = ieee80211_get_qos_ctl(hdr); + + /* MPSP trigger frame ends service period */ + *qoshdr |= IEEE80211_QOS_CTL_EOSP; + info->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS; + } + } + + ieee80211_add_pending_skbs(local, &frames); + sta_info_recalc_tim(sta); +} + +/** + * ieee80211_mpsp_trigger_process - track status of mesh Peer Service Periods + * + * @qc: QoS Control field + * @sta: peer to start a MPSP with + * @tx: frame was transmitted by the local STA + * @acked: frame has been transmitted successfully + * + * NOTE: active mode STA may only serve as MPSP owner + */ +void ieee80211_mpsp_trigger_process(u8 *qc, struct sta_info *sta, + bool tx, bool acked) +{ + u8 rspi = qc[1] & (IEEE80211_QOS_CTL_RSPI >> 8); + u8 eosp = qc[0] & IEEE80211_QOS_CTL_EOSP; + + if (tx) { + if (rspi && acked) + set_sta_flag(sta, WLAN_STA_MPSP_RECIPIENT); + + if (eosp) + clear_sta_flag(sta, WLAN_STA_MPSP_OWNER); + else if (acked && + test_sta_flag(sta, WLAN_STA_PS_STA) && + !test_and_set_sta_flag(sta, WLAN_STA_MPSP_OWNER)) + mps_frame_deliver(sta, -1); + } else { + if (eosp) + clear_sta_flag(sta, WLAN_STA_MPSP_RECIPIENT); + else if (sta->local_pm != NL80211_MESH_POWER_ACTIVE) + set_sta_flag(sta, WLAN_STA_MPSP_RECIPIENT); + + if (rspi && !test_and_set_sta_flag(sta, WLAN_STA_MPSP_OWNER)) + mps_frame_deliver(sta, -1); + } +} + +/** + * ieee80211_mps_frame_release - release buffered frames in response to beacon + * + * @sta: mesh STA + * @elems: beacon IEs + * + * For peers if we have individually-addressed frames buffered or the peer + * indicates buffered frames, send a corresponding MPSP trigger frame. Since + * we do not evaluate the awake window duration, QoS Nulls are used as MPSP + * trigger frames. If the neighbour STA is not a peer, only send single frames. + */ +void ieee80211_mps_frame_release(struct sta_info *sta, + struct ieee802_11_elems *elems) +{ + int ac, buffer_local = 0; + bool has_buffered = false; + + /* TIM map only for LLID <= IEEE80211_MAX_AID */ + if (sta->plink_state == NL80211_PLINK_ESTAB) + has_buffered = ieee80211_check_tim(elems->tim, elems->tim_len, + le16_to_cpu(sta->llid) % IEEE80211_MAX_AID); + + if (has_buffered) + mps_dbg(sta->sdata, "%pM indicates buffered frames\n", + sta->sta.addr); + + /* only transmit to PS STA with announced, non-zero awake window */ + if (test_sta_flag(sta, WLAN_STA_PS_STA) && + (!elems->awake_window || !le16_to_cpu(*elems->awake_window))) + return; + + for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) + buffer_local += skb_queue_len(&sta->ps_tx_buf[ac]) + + skb_queue_len(&sta->tx_filtered[ac]); + + if (!has_buffered && !buffer_local) + return; + + if (sta->plink_state == NL80211_PLINK_ESTAB) + mpsp_trigger_send(sta, has_buffered, !buffer_local); + else + mps_frame_deliver(sta, 1); +} diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index a19089565c4b..c98be0593756 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -1452,6 +1452,10 @@ ieee80211_rx_h_sta_process(struct ieee80211_rx_data *rx) } } + /* mesh power save support */ + if (ieee80211_vif_is_mesh(&rx->sdata->vif)) + ieee80211_mps_rx_h_sta_process(sta, hdr); + /* * Drop (qos-)data::nullfunc frames silently, since they * are used only to control station power saving mode. @@ -2090,7 +2094,10 @@ ieee80211_rx_h_mesh_fwding(struct ieee80211_rx_data *rx) if (is_multicast_ether_addr(fwd_hdr->addr1)) { IEEE80211_IFSTA_MESH_CTR_INC(ifmsh, fwded_mcast); memcpy(fwd_hdr->addr2, sdata->vif.addr, ETH_ALEN); + /* update power mode indication when forwarding */ + ieee80211_mps_set_frame_flags(sdata, NULL, fwd_hdr); } else if (!mesh_nexthop_lookup(fwd_skb, sdata)) { + /* mesh power mode flags updated in mesh_nexthop_lookup */ IEEE80211_IFSTA_MESH_CTR_INC(ifmsh, fwded_unicast); } else { /* unable to resolve next hop */ diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c index 227233c3ff7f..47a0f0601768 100644 --- a/net/mac80211/sta_info.c +++ b/net/mac80211/sta_info.c @@ -120,6 +120,8 @@ static void cleanup_single_sta(struct sta_info *sta) if (sta->sdata->vif.type == NL80211_IFTYPE_AP || sta->sdata->vif.type == NL80211_IFTYPE_AP_VLAN) ps = &sdata->bss->ps; + else if (ieee80211_vif_is_mesh(&sdata->vif)) + ps = &sdata->u.mesh.ps; else return; @@ -587,6 +589,12 @@ void sta_info_recalc_tim(struct sta_info *sta) ps = &sta->sdata->bss->ps; id = sta->sta.aid; +#ifdef CONFIG_MAC80211_MESH + } else if (ieee80211_vif_is_mesh(&sta->sdata->vif)) { + ps = &sta->sdata->u.mesh.ps; + /* TIM map only for PLID <= IEEE80211_MAX_AID */ + id = le16_to_cpu(sta->plid) % IEEE80211_MAX_AID; +#endif } else { return; } @@ -745,8 +753,9 @@ static bool sta_info_cleanup_expire_buffered(struct ieee80211_local *local, bool have_buffered = false; int ac; - /* This is only necessary for stations on BSS interfaces */ - if (!sta->sdata->bss) + /* This is only necessary for stations on BSS/MBSS interfaces */ + if (!sta->sdata->bss && + !ieee80211_vif_is_mesh(&sta->sdata->vif)) return false; for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) @@ -934,6 +943,11 @@ void ieee80211_sta_expire(struct ieee80211_sub_if_data *sdata, if (time_after(jiffies, sta->last_rx + exp_time)) { sta_dbg(sta->sdata, "expiring inactive STA %pM\n", sta->sta.addr); + + if (ieee80211_vif_is_mesh(&sdata->vif) && + test_sta_flag(sta, WLAN_STA_PS_STA)) + atomic_dec(&sdata->u.mesh.ps.num_sta_ps); + WARN_ON(__sta_info_destroy(sta)); } } @@ -992,6 +1006,8 @@ static void clear_sta_ps_flags(void *_sta) if (sdata->vif.type == NL80211_IFTYPE_AP || sdata->vif.type == NL80211_IFTYPE_AP_VLAN) ps = &sdata->bss->ps; + else if (ieee80211_vif_is_mesh(&sdata->vif)) + ps = &sdata->u.mesh.ps; else return; diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h index af7d78aa5523..5a1deba2c645 100644 --- a/net/mac80211/sta_info.h +++ b/net/mac80211/sta_info.h @@ -56,6 +56,8 @@ * @WLAN_STA_INSERTED: This station is inserted into the hash table. * @WLAN_STA_RATE_CONTROL: rate control was initialized for this station. * @WLAN_STA_TOFFSET_KNOWN: toffset calculated for this station is valid. + * @WLAN_STA_MPSP_OWNER: local STA is owner of a mesh Peer Service Period. + * @WLAN_STA_MPSP_RECIPIENT: local STA is recipient of a MPSP. */ enum ieee80211_sta_info_flags { WLAN_STA_AUTH, @@ -78,6 +80,8 @@ enum ieee80211_sta_info_flags { WLAN_STA_INSERTED, WLAN_STA_RATE_CONTROL, WLAN_STA_TOFFSET_KNOWN, + WLAN_STA_MPSP_OWNER, + WLAN_STA_MPSP_RECIPIENT, }; #define ADDBA_RESP_INTERVAL HZ @@ -282,6 +286,9 @@ struct sta_ampdu_mlme { * @t_offset_setpoint: reference timing offset of this sta to be used when * calculating clockdrift * @ch_width: peer's channel width + * @local_pm: local link-specific power save mode + * @peer_pm: peer-specific power save mode towards local STA + * @nonpeer_pm: STA power save mode towards non-peer neighbors * @debugfs: debug filesystem info * @dead: set to true when sta is unlinked * @uploaded: set to true when sta is uploaded to the driver @@ -379,6 +386,10 @@ struct sta_info { s64 t_offset; s64 t_offset_setpoint; enum nl80211_chan_width ch_width; + /* mesh power save */ + enum nl80211_mesh_power_mode local_pm; + enum nl80211_mesh_power_mode peer_pm; + enum nl80211_mesh_power_mode nonpeer_pm; #endif #ifdef CONFIG_MAC80211_DEBUGFS diff --git a/net/mac80211/status.c b/net/mac80211/status.c index d041de056b7f..43439203f4e4 100644 --- a/net/mac80211/status.c +++ b/net/mac80211/status.c @@ -472,6 +472,13 @@ void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb) return; } + /* mesh Peer Service Period support */ + if (ieee80211_vif_is_mesh(&sta->sdata->vif) && + ieee80211_is_data_qos(fc)) + ieee80211_mpsp_trigger_process( + ieee80211_get_qos_ctl(hdr), + sta, true, acked); + if ((local->hw.flags & IEEE80211_HW_HAS_RATE_CONTROL) && (rates_idx != -1)) sta->last_tx_rate = info->status.rates[rates_idx]; diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 7892b0a8873e..2ef0e19b06bb 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -329,6 +329,8 @@ static void purge_old_ps_buffers(struct ieee80211_local *local) if (sdata->vif.type == NL80211_IFTYPE_AP) ps = &sdata->u.ap.ps; + else if (ieee80211_vif_is_mesh(&sdata->vif)) + ps = &sdata->u.mesh.ps; else continue; @@ -372,18 +374,20 @@ ieee80211_tx_h_multicast_ps_buf(struct ieee80211_tx_data *tx) /* * broadcast/multicast frame * - * If any of the associated stations is in power save mode, + * If any of the associated/peer stations is in power save mode, * the frame is buffered to be sent after DTIM beacon frame. * This is done either by the hardware or us. */ - /* powersaving STAs currently only in AP/VLAN mode */ + /* powersaving STAs currently only in AP/VLAN/mesh mode */ if (tx->sdata->vif.type == NL80211_IFTYPE_AP || tx->sdata->vif.type == NL80211_IFTYPE_AP_VLAN) { if (!tx->sdata->bss) return TX_CONTINUE; ps = &tx->sdata->bss->ps; + } else if (ieee80211_vif_is_mesh(&tx->sdata->vif)) { + ps = &tx->sdata->u.mesh.ps; } else { return TX_CONTINUE; } @@ -1473,12 +1477,14 @@ void ieee80211_xmit(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb, hdr = (struct ieee80211_hdr *) skb->data; info->control.vif = &sdata->vif; - if (ieee80211_vif_is_mesh(&sdata->vif) && - ieee80211_is_data(hdr->frame_control) && - !is_multicast_ether_addr(hdr->addr1) && - mesh_nexthop_resolve(skb, sdata)) { - /* skb queued: don't free */ - return; + if (ieee80211_vif_is_mesh(&sdata->vif)) { + if (ieee80211_is_data(hdr->frame_control) && + is_unicast_ether_addr(hdr->addr1)) { + if (mesh_nexthop_resolve(skb, sdata)) + return; /* skb queued: don't free */ + } else { + ieee80211_mps_set_frame_flags(sdata, NULL, hdr); + } } ieee80211_set_qos_hdr(sdata, skb); @@ -2445,12 +2451,14 @@ struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw, 2 + /* NULL SSID */ 2 + 8 + /* supported rates */ 2 + 3 + /* DS params */ + 256 + /* TIM IE */ 2 + (IEEE80211_MAX_SUPP_RATES - 8) + 2 + sizeof(struct ieee80211_ht_cap) + 2 + sizeof(struct ieee80211_ht_operation) + 2 + sdata->u.mesh.mesh_id_len + 2 + sizeof(struct ieee80211_meshconf_ie) + - sdata->u.mesh.ie_len); + sdata->u.mesh.ie_len + + 2 + sizeof(__le16)); /* awake window */ if (!skb) goto out; @@ -2462,6 +2470,7 @@ struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw, eth_broadcast_addr(mgmt->da); memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN); memcpy(mgmt->bssid, sdata->vif.addr, ETH_ALEN); + ieee80211_mps_set_frame_flags(sdata, NULL, (void *) mgmt); mgmt->u.beacon.beacon_int = cpu_to_le16(sdata->vif.bss_conf.beacon_int); mgmt->u.beacon.capab_info |= cpu_to_le16( @@ -2475,12 +2484,14 @@ struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw, if (ieee80211_add_srates_ie(sdata, skb, true, band) || mesh_add_ds_params_ie(skb, sdata) || + ieee80211_beacon_add_tim(sdata, &ifmsh->ps, skb) || ieee80211_add_ext_srates_ie(sdata, skb, true, band) || mesh_add_rsn_ie(skb, sdata) || mesh_add_ht_cap_ie(skb, sdata) || mesh_add_ht_oper_ie(skb, sdata) || mesh_add_meshid_ie(skb, sdata) || mesh_add_meshconf_ie(skb, sdata) || + mesh_add_awake_window_ie(skb, sdata) || mesh_add_vendor_ies(skb, sdata)) { pr_err("o11s: couldn't add ies!\n"); goto out; @@ -2734,6 +2745,8 @@ ieee80211_get_buffered_bc(struct ieee80211_hw *hw, goto out; ps = &sdata->u.ap.ps; + } else if (ieee80211_vif_is_mesh(&sdata->vif)) { + ps = &sdata->u.mesh.ps; } else { goto out; } diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 139ad9b66c39..6cb71a350edd 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -805,6 +805,10 @@ u32 ieee802_11_parse_elems_crc(u8 *start, size_t len, elems->peering = pos; elems->peering_len = elen; break; + case WLAN_EID_MESH_AWAKE_WINDOW: + if (elen >= 2) + elems->awake_window = (void *)pos; + break; case WLAN_EID_PREQ: elems->preq = pos; elems->preq_len = elen; diff --git a/net/mac80211/wme.c b/net/mac80211/wme.c index 906f00cd6d2f..afba19cb6f87 100644 --- a/net/mac80211/wme.c +++ b/net/mac80211/wme.c @@ -191,6 +191,15 @@ void ieee80211_set_qos_hdr(struct ieee80211_sub_if_data *sdata, /* qos header is 2 bytes */ *p++ = ack_policy | tid; - *p = ieee80211_vif_is_mesh(&sdata->vif) ? - (IEEE80211_QOS_CTL_MESH_CONTROL_PRESENT >> 8) : 0; + if (ieee80211_vif_is_mesh(&sdata->vif)) { + /* preserve RSPI and Mesh PS Level bit */ + *p &= ((IEEE80211_QOS_CTL_RSPI | + IEEE80211_QOS_CTL_MESH_PS_LEVEL) >> 8); + + /* Nulls don't have a mesh header (frame body) */ + if (!ieee80211_is_qos_nullfunc(hdr->frame_control)) + *p |= (IEEE80211_QOS_CTL_MESH_CONTROL_PRESENT >> 8); + } else { + *p = 0; + } } From aa5a1b8e68c95151fd249a3b5ec444c6b0aa2f1c Mon Sep 17 00:00:00 2001 From: Thomas Pedersen Date: Mon, 4 Feb 2013 14:12:41 -0800 Subject: [PATCH 042/209] mac80211: stop plink timer only on mesh interfaces Since mesh_plink_quiesce() would unconditionally delete the plink timer, and the timer initialization was recently moved into the mesh code path, suspending with a non-mesh interface now causes a crash. Fix this by only deleting the plink timer for mesh interfaces. Reported-by: Emmanuel Grumbach Tested-by: Emmanuel Grumbach Signed-off-by: Thomas Pedersen Signed-off-by: Johannes Berg --- net/mac80211/mesh_plink.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c index fe7c3334d6fe..67524e7d2548 100644 --- a/net/mac80211/mesh_plink.c +++ b/net/mac80211/mesh_plink.c @@ -592,6 +592,9 @@ static void mesh_plink_timer(unsigned long data) #ifdef CONFIG_PM void mesh_plink_quiesce(struct sta_info *sta) { + if (!ieee80211_vif_is_mesh(&sta->sdata->vif)) + return; + if (del_timer_sync(&sta->plink_timer)) sta->plink_timer_was_running = true; } From c9f7a8ab7792b48259af6e94706a5d02dd74caef Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Sun, 27 Jan 2013 21:53:55 +0200 Subject: [PATCH 043/209] iwlwifi: don't ack the card state notification This is not needed with MVM firmware. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/mvm/fw.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/mvm/fw.c b/drivers/net/wireless/iwlwifi/mvm/fw.c index 90473c2ba1c7..d3d959db03a9 100644 --- a/drivers/net/wireless/iwlwifi/mvm/fw.c +++ b/drivers/net/wireless/iwlwifi/mvm/fw.c @@ -621,10 +621,6 @@ int iwl_mvm_rx_card_state_notif(struct iwl_mvm *mvm, (flags & CT_KILL_CARD_DISABLED) ? "Reached" : "Not reached"); - if (flags & CARD_DISABLED_MSK) - iwl_write32(mvm->trans, CSR_UCODE_DRV_GP1_SET, - CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED); - return 0; } From 2bfb50924c7e92362ac937aef2ab56bc7bd3ca52 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 27 Dec 2012 21:43:48 +0100 Subject: [PATCH 044/209] iwlwifi: use threaded interrupt handler With new transports coming up, move to threaded interrupt handling now. This has the advantage that we can use the same locking scheme with all different transports we may need to implement. Note that the TX path obviously still runs in a tasklet, so some spin_lock() calls need to change to spin_lock_bh() calls to properly lock out the TX path. In my test on a Calpella platform this has no impact on throughput or latency. Also add lockdep annotations to avoid lockups due to catch sending synchronous commands or using locks that connect with them from the irq thread. Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/dvm/rx.c | 2 +- drivers/net/wireless/iwlwifi/dvm/sta.c | 4 +- drivers/net/wireless/iwlwifi/dvm/tx.c | 16 ++++---- drivers/net/wireless/iwlwifi/iwl-op-mode.h | 10 +++-- drivers/net/wireless/iwlwifi/iwl-trans.h | 29 +++++++++++++- drivers/net/wireless/iwlwifi/mvm/rx.c | 2 +- drivers/net/wireless/iwlwifi/mvm/tx.c | 12 +++--- drivers/net/wireless/iwlwifi/pcie/internal.h | 3 +- drivers/net/wireless/iwlwifi/pcie/rx.c | 40 ++++++++++++-------- drivers/net/wireless/iwlwifi/pcie/trans.c | 11 ++---- drivers/net/wireless/iwlwifi/pcie/tx.c | 8 ++-- 11 files changed, 85 insertions(+), 52 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/dvm/rx.c b/drivers/net/wireless/iwlwifi/dvm/rx.c index e8d5b90abf5c..a4eed2055fdb 100644 --- a/drivers/net/wireless/iwlwifi/dvm/rx.c +++ b/drivers/net/wireless/iwlwifi/dvm/rx.c @@ -790,7 +790,7 @@ static void iwlagn_pass_packet_to_mac80211(struct iwl_priv *priv, memcpy(IEEE80211_SKB_RXCB(skb), stats, sizeof(*stats)); - ieee80211_rx(priv->hw, skb); + ieee80211_rx_ni(priv->hw, skb); } static u32 iwlagn_translate_rx_status(struct iwl_priv *priv, u32 decrypt_in) diff --git a/drivers/net/wireless/iwlwifi/dvm/sta.c b/drivers/net/wireless/iwlwifi/dvm/sta.c index ab768045696b..2d33760a9dc2 100644 --- a/drivers/net/wireless/iwlwifi/dvm/sta.c +++ b/drivers/net/wireless/iwlwifi/dvm/sta.c @@ -77,7 +77,7 @@ static int iwl_process_add_sta_resp(struct iwl_priv *priv, IWL_DEBUG_INFO(priv, "Processing response for adding station %u\n", sta_id); - spin_lock(&priv->sta_lock); + spin_lock_bh(&priv->sta_lock); switch (add_sta_resp->status) { case ADD_STA_SUCCESS_MSK: @@ -119,7 +119,7 @@ static int iwl_process_add_sta_resp(struct iwl_priv *priv, priv->stations[sta_id].sta.mode == STA_CONTROL_MODIFY_MSK ? "Modified" : "Added", addsta->sta.addr); - spin_unlock(&priv->sta_lock); + spin_unlock_bh(&priv->sta_lock); return ret; } diff --git a/drivers/net/wireless/iwlwifi/dvm/tx.c b/drivers/net/wireless/iwlwifi/dvm/tx.c index 7b0550d35a91..4ece5ea81b86 100644 --- a/drivers/net/wireless/iwlwifi/dvm/tx.c +++ b/drivers/net/wireless/iwlwifi/dvm/tx.c @@ -1117,7 +1117,7 @@ int iwlagn_rx_reply_tx(struct iwl_priv *priv, struct iwl_rx_cmd_buffer *rxb, sta_id = (tx_resp->ra_tid & IWLAGN_TX_RES_RA_MSK) >> IWLAGN_TX_RES_RA_POS; - spin_lock(&priv->sta_lock); + spin_lock_bh(&priv->sta_lock); if (is_agg) iwl_rx_reply_tx_agg(priv, tx_resp); @@ -1239,11 +1239,11 @@ int iwlagn_rx_reply_tx(struct iwl_priv *priv, struct iwl_rx_cmd_buffer *rxb, le16_to_cpu(tx_resp->seq_ctl)); iwl_check_abort_status(priv, tx_resp->frame_count, status); - spin_unlock(&priv->sta_lock); + spin_unlock_bh(&priv->sta_lock); while (!skb_queue_empty(&skbs)) { skb = __skb_dequeue(&skbs); - ieee80211_tx_status(priv->hw, skb); + ieee80211_tx_status_ni(priv->hw, skb); } if (is_offchannel_skb) @@ -1290,12 +1290,12 @@ int iwlagn_rx_reply_compressed_ba(struct iwl_priv *priv, tid = ba_resp->tid; agg = &priv->tid_data[sta_id][tid].agg; - spin_lock(&priv->sta_lock); + spin_lock_bh(&priv->sta_lock); if (unlikely(!agg->wait_for_ba)) { if (unlikely(ba_resp->bitmap)) IWL_ERR(priv, "Received BA when not expected\n"); - spin_unlock(&priv->sta_lock); + spin_unlock_bh(&priv->sta_lock); return 0; } @@ -1309,7 +1309,7 @@ int iwlagn_rx_reply_compressed_ba(struct iwl_priv *priv, IWL_DEBUG_TX_QUEUES(priv, "Bad queue mapping txq_id=%d, agg_txq[sta:%d,tid:%d]=%d\n", scd_flow, sta_id, tid, agg->txq_id); - spin_unlock(&priv->sta_lock); + spin_unlock_bh(&priv->sta_lock); return 0; } @@ -1378,11 +1378,11 @@ int iwlagn_rx_reply_compressed_ba(struct iwl_priv *priv, } } - spin_unlock(&priv->sta_lock); + spin_unlock_bh(&priv->sta_lock); while (!skb_queue_empty(&reclaimed_skbs)) { skb = __skb_dequeue(&reclaimed_skbs); - ieee80211_tx_status(priv->hw, skb); + ieee80211_tx_status_ni(priv->hw, skb); } return 0; diff --git a/drivers/net/wireless/iwlwifi/iwl-op-mode.h b/drivers/net/wireless/iwlwifi/iwl-op-mode.h index dc792584f401..4a680019e117 100644 --- a/drivers/net/wireless/iwlwifi/iwl-op-mode.h +++ b/drivers/net/wireless/iwlwifi/iwl-op-mode.h @@ -113,13 +113,13 @@ struct iwl_cfg; * May sleep * @rx: Rx notification to the op_mode. rxb is the Rx buffer itself. Cmd is the * HCMD the this Rx responds to. - * Must be atomic and called with BH disabled. + * This callback may sleep, it is called from a threaded IRQ handler. * @queue_full: notifies that a HW queue is full. * Must be atomic and called with BH disabled. * @queue_not_full: notifies that a HW queue is not full any more. * Must be atomic and called with BH disabled. * @hw_rf_kill:notifies of a change in the HW rf kill switch. True means that - * the radio is killed. Must be atomic. + * the radio is killed. May sleep. * @free_skb: allows the transport layer to free skbs that haven't been * reclaimed by the op_mode. This can happen when the driver is freed and * there are Tx packets pending in the transport layer. @@ -130,8 +130,7 @@ struct iwl_cfg; * called with BH disabled. * @nic_config: configure NIC, called before firmware is started. * May sleep - * @wimax_active: invoked when WiMax becomes active. Must be atomic and called - * with BH disabled. + * @wimax_active: invoked when WiMax becomes active. May sleep */ struct iwl_op_mode_ops { struct iwl_op_mode *(*start)(struct iwl_trans *trans, @@ -178,6 +177,7 @@ static inline int iwl_op_mode_rx(struct iwl_op_mode *op_mode, struct iwl_rx_cmd_buffer *rxb, struct iwl_device_cmd *cmd) { + might_sleep(); return op_mode->ops->rx(op_mode, rxb, cmd); } @@ -196,6 +196,7 @@ static inline void iwl_op_mode_queue_not_full(struct iwl_op_mode *op_mode, static inline void iwl_op_mode_hw_rf_kill(struct iwl_op_mode *op_mode, bool state) { + might_sleep(); op_mode->ops->hw_rf_kill(op_mode, state); } @@ -223,6 +224,7 @@ static inline void iwl_op_mode_nic_config(struct iwl_op_mode *op_mode) static inline void iwl_op_mode_wimax_active(struct iwl_op_mode *op_mode) { + might_sleep(); op_mode->ops->wimax_active(op_mode); } diff --git a/drivers/net/wireless/iwlwifi/iwl-trans.h b/drivers/net/wireless/iwlwifi/iwl-trans.h index 0a3d4df5f434..8c7bec6b9a0b 100644 --- a/drivers/net/wireless/iwlwifi/iwl-trans.h +++ b/drivers/net/wireless/iwlwifi/iwl-trans.h @@ -65,6 +65,7 @@ #include #include /* for page_address */ +#include #include "iwl-debug.h" #include "iwl-config.h" @@ -526,6 +527,10 @@ struct iwl_trans { struct dentry *dbgfs_dir; +#ifdef CONFIG_LOCKDEP + struct lockdep_map sync_cmd_lockdep_map; +#endif + /* pointer to trans specific struct */ /*Ensure that this pointer will always be aligned to sizeof pointer */ char trans_specific[0] __aligned(sizeof(void *)); @@ -602,12 +607,22 @@ static inline int iwl_trans_d3_resume(struct iwl_trans *trans, } static inline int iwl_trans_send_cmd(struct iwl_trans *trans, - struct iwl_host_cmd *cmd) + struct iwl_host_cmd *cmd) { + int ret; + WARN_ONCE(trans->state != IWL_TRANS_FW_ALIVE, "%s bad state = %d", __func__, trans->state); - return trans->ops->send_cmd(trans, cmd); + if (!(cmd->flags & CMD_ASYNC)) + lock_map_acquire_read(&trans->sync_cmd_lockdep_map); + + ret = trans->ops->send_cmd(trans, cmd); + + if (!(cmd->flags & CMD_ASYNC)) + lock_map_release(&trans->sync_cmd_lockdep_map); + + return ret; } static inline struct iwl_device_cmd * @@ -791,4 +806,14 @@ iwl_trans_release_nic_access(struct iwl_trans *trans, unsigned long *flags) int __must_check iwl_pci_register_driver(void); void iwl_pci_unregister_driver(void); +static inline void trans_lockdep_init(struct iwl_trans *trans) +{ +#ifdef CONFIG_LOCKDEP + static struct lock_class_key __key; + + lockdep_init_map(&trans->sync_cmd_lockdep_map, "sync_cmd_lockdep_map", + &__key, 0); +#endif +} + #endif /* __iwl_trans_h__ */ diff --git a/drivers/net/wireless/iwlwifi/mvm/rx.c b/drivers/net/wireless/iwlwifi/mvm/rx.c index 52da375e5740..3f3ce91ad5c2 100644 --- a/drivers/net/wireless/iwlwifi/mvm/rx.c +++ b/drivers/net/wireless/iwlwifi/mvm/rx.c @@ -121,7 +121,7 @@ static void iwl_mvm_pass_packet_to_mac80211(struct iwl_mvm *mvm, memcpy(IEEE80211_SKB_RXCB(skb), stats, sizeof(*stats)); - ieee80211_rx(mvm->hw, skb); + ieee80211_rx_ni(mvm->hw, skb); } /* diff --git a/drivers/net/wireless/iwlwifi/mvm/tx.c b/drivers/net/wireless/iwlwifi/mvm/tx.c index cada8efe0cca..6b67ce3f679c 100644 --- a/drivers/net/wireless/iwlwifi/mvm/tx.c +++ b/drivers/net/wireless/iwlwifi/mvm/tx.c @@ -620,7 +620,7 @@ static void iwl_mvm_rx_tx_cmd_single(struct iwl_mvm *mvm, seq_ctl = le16_to_cpu(hdr->seq_ctrl); } - ieee80211_tx_status(mvm->hw, skb); + ieee80211_tx_status_ni(mvm->hw, skb); } if (txq_id >= IWL_FIRST_AMPDU_QUEUE) { @@ -663,12 +663,12 @@ static void iwl_mvm_rx_tx_cmd_single(struct iwl_mvm *mvm, struct iwl_mvm_tid_data *tid_data = &mvmsta->tid_data[tid]; - spin_lock(&mvmsta->lock); + spin_lock_bh(&mvmsta->lock); tid_data->next_reclaimed = next_reclaimed; IWL_DEBUG_TX_REPLY(mvm, "Next reclaimed packet:%d\n", next_reclaimed); iwl_mvm_check_ratid_empty(mvm, sta, tid); - spin_unlock(&mvmsta->lock); + spin_unlock_bh(&mvmsta->lock); } #ifdef CONFIG_PM_SLEEP @@ -832,7 +832,7 @@ int iwl_mvm_rx_ba_notif(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb, return 0; } - spin_lock(&mvmsta->lock); + spin_lock_bh(&mvmsta->lock); __skb_queue_head_init(&reclaimed_skbs); @@ -886,13 +886,13 @@ int iwl_mvm_rx_ba_notif(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb, } } - spin_unlock(&mvmsta->lock); + spin_unlock_bh(&mvmsta->lock); rcu_read_unlock(); while (!skb_queue_empty(&reclaimed_skbs)) { skb = __skb_dequeue(&reclaimed_skbs); - ieee80211_tx_status(mvm->hw, skb); + ieee80211_tx_status_ni(mvm->hw, skb); } return 0; diff --git a/drivers/net/wireless/iwlwifi/pcie/internal.h b/drivers/net/wireless/iwlwifi/pcie/internal.h index 5f6bb4e09d42..aa2a39a637dd 100644 --- a/drivers/net/wireless/iwlwifi/pcie/internal.h +++ b/drivers/net/wireless/iwlwifi/pcie/internal.h @@ -249,7 +249,6 @@ struct iwl_trans_pcie { int ict_index; u32 inta; bool use_ict; - struct tasklet_struct irq_tasklet; struct isr_statistics isr_stats; spinlock_t irq_lock; @@ -330,7 +329,7 @@ void iwl_trans_pcie_free(struct iwl_trans *trans); * RX ******************************************************/ int iwl_pcie_rx_init(struct iwl_trans *trans); -void iwl_pcie_tasklet(struct iwl_trans *trans); +irqreturn_t iwl_pcie_irq_handler(int irq, void *dev_id); int iwl_pcie_rx_stop(struct iwl_trans *trans); void iwl_pcie_rx_free(struct iwl_trans *trans); diff --git a/drivers/net/wireless/iwlwifi/pcie/rx.c b/drivers/net/wireless/iwlwifi/pcie/rx.c index a9ca1d35fa93..b0ae06d2456f 100644 --- a/drivers/net/wireless/iwlwifi/pcie/rx.c +++ b/drivers/net/wireless/iwlwifi/pcie/rx.c @@ -81,10 +81,10 @@ * 'processed' and 'read' driver indexes as well) * + A received packet is processed and handed to the kernel network stack, * detached from the iwl->rxq. The driver 'processed' index is updated. - * + The Host/Firmware iwl->rxq is replenished at tasklet time from the rx_free - * list. If there are no allocated buffers in iwl->rxq->rx_free, the READ - * INDEX is not incremented and iwl->status(RX_STALLED) is set. If there - * were enough free buffers and RX_STALLED is set it is cleared. + * + The Host/Firmware iwl->rxq is replenished at irq thread time from the + * rx_free list. If there are no allocated buffers in iwl->rxq->rx_free, + * the READ INDEX is not incremented and iwl->status(RX_STALLED) is set. + * If there were enough free buffers and RX_STALLED is set it is cleared. * * * Driver sequence: @@ -214,9 +214,9 @@ static void iwl_pcie_rxq_restock(struct iwl_trans *trans) /* * If the device isn't enabled - not need to try to add buffers... * This can happen when we stop the device and still have an interrupt - * pending. We stop the APM before we sync the interrupts / tasklets - * because we have to (see comment there). On the other hand, since - * the APM is stopped, we cannot access the HW (in particular not prph). + * pending. We stop the APM before we sync the interrupts because we + * have to (see comment there). On the other hand, since the APM is + * stopped, we cannot access the HW (in particular not prph). * So don't try to restock if the APM has been already stopped. */ if (!test_bit(STATUS_DEVICE_ENABLED, &trans_pcie->status)) @@ -796,11 +796,14 @@ static void iwl_pcie_irq_handle_error(struct iwl_trans *trans) clear_bit(STATUS_HCMD_ACTIVE, &trans_pcie->status); wake_up(&trans_pcie->wait_command_queue); + local_bh_disable(); iwl_op_mode_nic_error(trans->op_mode); + local_bh_enable(); } -void iwl_pcie_tasklet(struct iwl_trans *trans) +irqreturn_t iwl_pcie_irq_handler(int irq, void *dev_id) { + struct iwl_trans *trans = dev_id; struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); struct isr_statistics *isr_stats = &trans_pcie->isr_stats; u32 inta = 0; @@ -811,6 +814,8 @@ void iwl_pcie_tasklet(struct iwl_trans *trans) u32 inta_mask; #endif + lock_map_acquire(&trans->sync_cmd_lockdep_map); + spin_lock_irqsave(&trans_pcie->irq_lock, flags); /* Ack/clear/reset pending uCode interrupts. @@ -855,7 +860,7 @@ void iwl_pcie_tasklet(struct iwl_trans *trans) handled |= CSR_INT_BIT_HW_ERR; - return; + goto out; } #ifdef CONFIG_IWLWIFI_DEBUG @@ -1005,6 +1010,10 @@ void iwl_pcie_tasklet(struct iwl_trans *trans) /* Re-enable RF_KILL if it occurred */ else if (handled & CSR_INT_BIT_RF_KILL) iwl_enable_rfkill_int(trans); + +out: + lock_map_release(&trans->sync_cmd_lockdep_map); + return IRQ_HANDLED; } /****************************************************************************** @@ -1127,7 +1136,7 @@ static irqreturn_t iwl_pcie_isr(int irq, void *data) /* Disable (but don't clear!) interrupts here to avoid * back-to-back ISRs and sporadic interrupts from our NIC. - * If we have something to service, the tasklet will re-enable ints. + * If we have something to service, the irq thread will re-enable ints. * If we *don't* have something, we'll re-enable before leaving here. */ inta_mask = iwl_read32(trans, CSR_INT_MASK); iwl_write32(trans, CSR_INT_MASK, 0x00000000); @@ -1167,9 +1176,9 @@ static irqreturn_t iwl_pcie_isr(int irq, void *data) #endif trans_pcie->inta |= inta; - /* iwl_pcie_tasklet() will service interrupts and re-enable them */ + /* the thread will service interrupts and re-enable them */ if (likely(inta)) - tasklet_schedule(&trans_pcie->irq_tasklet); + return IRQ_WAKE_THREAD; else if (test_bit(STATUS_INT_ENABLED, &trans_pcie->status) && !trans_pcie->inta) iwl_enable_interrupts(trans); @@ -1277,9 +1286,10 @@ irqreturn_t iwl_pcie_isr_ict(int irq, void *data) trans_pcie->inta |= inta; /* iwl_pcie_tasklet() will service interrupts and re-enable them */ - if (likely(inta)) - tasklet_schedule(&trans_pcie->irq_tasklet); - else if (test_bit(STATUS_INT_ENABLED, &trans_pcie->status) && + if (likely(inta)) { + spin_unlock_irqrestore(&trans_pcie->irq_lock, flags); + return IRQ_WAKE_THREAD; + } else if (test_bit(STATUS_INT_ENABLED, &trans_pcie->status) && !trans_pcie->inta) { /* Allow interrupt if was disabled by this handler and * no tasklet was schedules, We should not enable interrupt, diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index 56d4f72500bc..17bedc50e753 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -760,7 +760,6 @@ void iwl_trans_pcie_free(struct iwl_trans *trans) struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); synchronize_irq(trans_pcie->pci_dev->irq); - tasklet_kill(&trans_pcie->irq_tasklet); iwl_pcie_tx_free(trans); iwl_pcie_rx_free(trans); @@ -1480,6 +1479,7 @@ struct iwl_trans *iwl_trans_pcie_alloc(struct pci_dev *pdev, trans->ops = &trans_ops_pcie; trans->cfg = cfg; + trans_lockdep_init(trans); trans_pcie->trans = trans; spin_lock_init(&trans_pcie->irq_lock); spin_lock_init(&trans_pcie->reg_lock); @@ -1567,15 +1567,12 @@ struct iwl_trans *iwl_trans_pcie_alloc(struct pci_dev *pdev, trans_pcie->inta_mask = CSR_INI_SET_MASK; - tasklet_init(&trans_pcie->irq_tasklet, (void (*)(unsigned long)) - iwl_pcie_tasklet, (unsigned long)trans); - if (iwl_pcie_alloc_ict(trans)) goto out_free_cmd_pool; - err = request_irq(pdev->irq, iwl_pcie_isr_ict, - IRQF_SHARED, DRV_NAME, trans); - if (err) { + if (request_threaded_irq(pdev->irq, iwl_pcie_isr_ict, + iwl_pcie_irq_handler, + IRQF_SHARED, DRV_NAME, trans)) { IWL_ERR(trans, "Error allocating IRQ %d\n", pdev->irq); goto out_free_ict; } diff --git a/drivers/net/wireless/iwlwifi/pcie/tx.c b/drivers/net/wireless/iwlwifi/pcie/tx.c index 041127ad372a..8e9e3212fe78 100644 --- a/drivers/net/wireless/iwlwifi/pcie/tx.c +++ b/drivers/net/wireless/iwlwifi/pcie/tx.c @@ -926,7 +926,7 @@ void iwl_trans_pcie_reclaim(struct iwl_trans *trans, int txq_id, int ssn, if (WARN_ON(txq_id == trans_pcie->cmd_queue)) return; - spin_lock(&txq->lock); + spin_lock_bh(&txq->lock); if (txq->q.read_ptr == tfd_num) goto out; @@ -970,7 +970,7 @@ void iwl_trans_pcie_reclaim(struct iwl_trans *trans, int txq_id, int ssn, if (iwl_queue_space(&txq->q) > txq->q.low_mark) iwl_wake_queue(trans, txq); out: - spin_unlock(&txq->lock); + spin_unlock_bh(&txq->lock); } /* @@ -1371,7 +1371,7 @@ void iwl_pcie_hcmd_complete(struct iwl_trans *trans, return; } - spin_lock(&txq->lock); + spin_lock_bh(&txq->lock); cmd_index = get_cmd_index(&txq->q, index); cmd = txq->entries[cmd_index].cmd; @@ -1405,7 +1405,7 @@ void iwl_pcie_hcmd_complete(struct iwl_trans *trans, meta->flags = 0; - spin_unlock(&txq->lock); + spin_unlock_bh(&txq->lock); } #define HOST_COMPLETE_TIMEOUT (2 * HZ) From 9646b1346760a0af1035f0c59ba727fca1f5824d Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Wed, 12 Dec 2012 10:14:22 +0200 Subject: [PATCH 045/209] wlcore: use single-role version when verifying the PLT firmware The PLT firmware used by wl12xx for calibration always has the same version number as the single-role firmware. Currntly the driver rejects the PLT firmware since anything that is not single-role uses the multi-role version. Fix this by using the single-role version for everything except multi-role. Signed-off-by: Luciano Coelho --- drivers/net/wireless/ti/wlcore/boot.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ti/wlcore/boot.c b/drivers/net/wireless/ti/wlcore/boot.c index b58ae5fc1487..77752b03f189 100644 --- a/drivers/net/wireless/ti/wlcore/boot.c +++ b/drivers/net/wireless/ti/wlcore/boot.c @@ -84,8 +84,8 @@ out: static int wlcore_validate_fw_ver(struct wl1271 *wl) { unsigned int *fw_ver = wl->chip.fw_ver; - unsigned int *min_ver = (wl->fw_type == WL12XX_FW_TYPE_NORMAL) ? - wl->min_sr_fw_ver : wl->min_mr_fw_ver; + unsigned int *min_ver = (wl->fw_type == WL12XX_FW_TYPE_MULTI) ? + wl->min_mr_fw_ver : wl->min_sr_fw_ver; char min_fw_str[32] = ""; int i; From 3a0a8d961e20132272887d9826738ce9b4d818f7 Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Wed, 23 Jan 2013 16:40:34 +0200 Subject: [PATCH 046/209] wlcore: remove unused set_power method There is no platform-specific set_power method anymore. Power setting is done in the bus modules (wlcore_sdio and wlcore_spi). Signed-off-by: Luciano Coelho Reviewed-by: Felipe Balbi --- drivers/net/wireless/ti/wlcore/main.c | 1 - drivers/net/wireless/ti/wlcore/wlcore.h | 1 - 2 files changed, 2 deletions(-) diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index e1dfdf94d0f7..9a66acf1205f 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -5995,7 +5995,6 @@ static void wlcore_nvs_cb(const struct firmware *fw, void *context) wl->irq = platform_get_irq(pdev, 0); wl->platform_quirks = pdata->platform_quirks; - wl->set_power = pdata->set_power; wl->if_ops = pdata->ops; if (wl->platform_quirks & WL12XX_PLATFORM_QUIRK_EDGE_IRQ) diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h index ebd8c6fad7cd..af9fecaefc30 100644 --- a/drivers/net/wireless/ti/wlcore/wlcore.h +++ b/drivers/net/wireless/ti/wlcore/wlcore.h @@ -183,7 +183,6 @@ struct wl1271 { struct wl1271_if_operations *if_ops; - void (*set_power)(bool enable); int irq; spinlock_t wl_lock; From afb43e6d88e587441c960a5d214d2c698d076c9c Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Fri, 25 Jan 2013 11:57:48 +0200 Subject: [PATCH 047/209] wlcore: remove if_ops from platform_data We can't pass pointers from the platform data to the modules, because with DT it cannot be done. Those pointers are not set by the board files anyway. It's the bus modules that set them, so they can be safely removed from the platform data without changing any board files. Create a new structure that the bus modules pass to wlcore. This structure contains the if_ops pointers and a pointer to the actual platform data. Signed-off-by: Luciano Coelho Reviewed-by: Felipe Balbi --- drivers/net/wireless/ti/wl12xx/main.c | 3 ++- drivers/net/wireless/ti/wlcore/main.c | 5 +++-- drivers/net/wireless/ti/wlcore/sdio.c | 22 +++++++++++++++++----- drivers/net/wireless/ti/wlcore/spi.c | 20 +++++++++++++++++--- drivers/net/wireless/ti/wlcore/wlcore_i.h | 5 +++++ include/linux/wl12xx.h | 2 -- 6 files changed, 44 insertions(+), 13 deletions(-) diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c index 3254bfc81a2a..09694e39bb14 100644 --- a/drivers/net/wireless/ti/wl12xx/main.c +++ b/drivers/net/wireless/ti/wl12xx/main.c @@ -1703,7 +1703,8 @@ static struct ieee80211_sta_ht_cap wl12xx_ht_cap = { static int wl12xx_setup(struct wl1271 *wl) { struct wl12xx_priv *priv = wl->priv; - struct wl12xx_platform_data *pdata = wl->pdev->dev.platform_data; + struct wlcore_platdev_data *pdev_data = wl->pdev->dev.platform_data; + struct wl12xx_platform_data *pdata = pdev_data->pdata; wl->rtable = wl12xx_rtable; wl->num_tx_desc = WL12XX_NUM_TX_DESCRIPTORS; diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index 9a66acf1205f..cd70335cd5e8 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -5966,7 +5966,8 @@ static void wlcore_nvs_cb(const struct firmware *fw, void *context) { struct wl1271 *wl = context; struct platform_device *pdev = wl->pdev; - struct wl12xx_platform_data *pdata = pdev->dev.platform_data; + struct wlcore_platdev_data *pdev_data = pdev->dev.platform_data; + struct wl12xx_platform_data *pdata = pdev_data->pdata; unsigned long irqflags; int ret; @@ -5995,7 +5996,7 @@ static void wlcore_nvs_cb(const struct firmware *fw, void *context) wl->irq = platform_get_irq(pdev, 0); wl->platform_quirks = pdata->platform_quirks; - wl->if_ops = pdata->ops; + wl->if_ops = pdev_data->if_ops; if (wl->platform_quirks & WL12XX_PLATFORM_QUIRK_EDGE_IRQ) irqflags = IRQF_TRIGGER_RISING; diff --git a/drivers/net/wireless/ti/wlcore/sdio.c b/drivers/net/wireless/ti/wlcore/sdio.c index d4f184e2efed..1f6f6e30daca 100644 --- a/drivers/net/wireless/ti/wlcore/sdio.c +++ b/drivers/net/wireless/ti/wlcore/sdio.c @@ -218,6 +218,7 @@ static int wl1271_probe(struct sdio_func *func, const struct sdio_device_id *id) { struct wl12xx_platform_data *wlan_data; + struct wlcore_platdev_data *pdev_data; struct wl12xx_sdio_glue *glue; struct resource res[1]; mmc_pm_flag_t mmcflags; @@ -228,10 +229,18 @@ static int wl1271_probe(struct sdio_func *func, if (func->num != 0x02) return -ENODEV; + pdev_data = kzalloc(sizeof(*pdev_data), GFP_KERNEL); + if (!pdev_data) { + dev_err(&func->dev, "can't allocate platdev_data\n"); + goto out; + } + + pdev_data->if_ops = &sdio_ops; + glue = kzalloc(sizeof(*glue), GFP_KERNEL); if (!glue) { dev_err(&func->dev, "can't allocate glue\n"); - goto out; + goto out_free_pdev_data; } glue->dev = &func->dev; @@ -256,8 +265,6 @@ static int wl1271_probe(struct sdio_func *func, if (mmcflags & MMC_PM_KEEP_POWER) wlan_data->pwr_in_suspend = true; - wlan_data->ops = &sdio_ops; - sdio_set_drvdata(func, glue); /* Tell PM core that we don't need the card to be powered now */ @@ -295,8 +302,10 @@ static int wl1271_probe(struct sdio_func *func, goto out_dev_put; } - ret = platform_device_add_data(glue->core, wlan_data, - sizeof(*wlan_data)); + pdev_data->pdata = wlan_data; + + ret = platform_device_add_data(glue->core, pdev_data, + sizeof(*pdev_data)); if (ret) { dev_err(glue->dev, "can't add platform data\n"); goto out_dev_put; @@ -315,6 +324,9 @@ out_dev_put: out_free_glue: kfree(glue); +out_free_pdev_data: + kfree(pdev_data); + out: return ret; } diff --git a/drivers/net/wireless/ti/wlcore/spi.c b/drivers/net/wireless/ti/wlcore/spi.c index 2d700b7ae14c..d437f4d28bd0 100644 --- a/drivers/net/wireless/ti/wlcore/spi.c +++ b/drivers/net/wireless/ti/wlcore/spi.c @@ -328,6 +328,7 @@ static int wl1271_probe(struct spi_device *spi) { struct wl12xx_spi_glue *glue; struct wl12xx_platform_data *pdata; + struct wlcore_platdev_data *pdev_data; struct resource res[1]; int ret = -ENOMEM; @@ -337,12 +338,18 @@ static int wl1271_probe(struct spi_device *spi) return -ENODEV; } - pdata->ops = &spi_ops; + pdev_data = kzalloc(sizeof(*pdev_data), GFP_KERNEL); + if (!pdev_data) { + dev_err(&spi->dev, "can't allocate platdev_data\n"); + goto out; + } + + pdev_data->if_ops = &spi_ops; glue = kzalloc(sizeof(*glue), GFP_KERNEL); if (!glue) { dev_err(&spi->dev, "can't allocate glue\n"); - goto out; + goto out_free_pdev_data; } glue->dev = &spi->dev; @@ -380,7 +387,10 @@ static int wl1271_probe(struct spi_device *spi) goto out_dev_put; } - ret = platform_device_add_data(glue->core, pdata, sizeof(*pdata)); + pdev_data->pdata = pdata; + + ret = platform_device_add_data(glue->core, pdev_data, + sizeof(*pdev_data)); if (ret) { dev_err(glue->dev, "can't add platform data\n"); goto out_dev_put; @@ -399,6 +409,10 @@ out_dev_put: out_free_glue: kfree(glue); + +out_free_pdev_data: + kfree(pdev_data); + out: return ret; } diff --git a/drivers/net/wireless/ti/wlcore/wlcore_i.h b/drivers/net/wireless/ti/wlcore/wlcore_i.h index 20316ac328a2..c845b0ef7f4b 100644 --- a/drivers/net/wireless/ti/wlcore/wlcore_i.h +++ b/drivers/net/wireless/ti/wlcore/wlcore_i.h @@ -206,6 +206,11 @@ struct wl1271_if_operations { void (*set_block_size) (struct device *child, unsigned int blksz); }; +struct wlcore_platdev_data { + struct wl12xx_platform_data *pdata; + struct wl1271_if_operations *if_ops; +}; + #define MAX_NUM_KEYS 14 #define MAX_KEY_SIZE 32 diff --git a/include/linux/wl12xx.h b/include/linux/wl12xx.h index 0d6373195d32..360c9bce665c 100644 --- a/include/linux/wl12xx.h +++ b/include/linux/wl12xx.h @@ -55,8 +55,6 @@ struct wl12xx_platform_data { int board_tcxo_clock; unsigned long platform_quirks; bool pwr_in_suspend; - - struct wl1271_if_operations *ops; }; /* Platform does not support level trigger interrupts */ From 91147a6cd0f599e1e2f5a904c37d73df58f9508f Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Wed, 23 Jan 2013 16:40:36 +0200 Subject: [PATCH 048/209] wlcore: use wl12xx_platform_data pointer from wlcore_pdev_data Just a small cleanup to use the pointer provided by wlcore_pdev_data instead of using a separate pointer then copying. Reviewed-by: Felipe Balbi Signed-off-by: Luciano Coelho --- drivers/net/wireless/ti/wlcore/sdio.c | 13 +++++-------- drivers/net/wireless/ti/wlcore/spi.c | 16 +++++++--------- 2 files changed, 12 insertions(+), 17 deletions(-) diff --git a/drivers/net/wireless/ti/wlcore/sdio.c b/drivers/net/wireless/ti/wlcore/sdio.c index 1f6f6e30daca..6d2884f040c7 100644 --- a/drivers/net/wireless/ti/wlcore/sdio.c +++ b/drivers/net/wireless/ti/wlcore/sdio.c @@ -217,7 +217,6 @@ static struct wl1271_if_operations sdio_ops = { static int wl1271_probe(struct sdio_func *func, const struct sdio_device_id *id) { - struct wl12xx_platform_data *wlan_data; struct wlcore_platdev_data *pdev_data; struct wl12xx_sdio_glue *glue; struct resource res[1]; @@ -251,9 +250,9 @@ static int wl1271_probe(struct sdio_func *func, /* Use block mode for transferring over one block size of data */ func->card->quirks |= MMC_QUIRK_BLKSZ_FOR_BYTE_MODE; - wlan_data = wl12xx_get_platform_data(); - if (IS_ERR(wlan_data)) { - ret = PTR_ERR(wlan_data); + pdev_data->pdata = wl12xx_get_platform_data(); + if (IS_ERR(pdev_data->pdata)) { + ret = PTR_ERR(pdev_data->pdata); dev_err(glue->dev, "missing wlan platform data: %d\n", ret); goto out_free_glue; } @@ -263,7 +262,7 @@ static int wl1271_probe(struct sdio_func *func, dev_dbg(glue->dev, "sdio PM caps = 0x%x\n", mmcflags); if (mmcflags & MMC_PM_KEEP_POWER) - wlan_data->pwr_in_suspend = true; + pdev_data->pdata->pwr_in_suspend = true; sdio_set_drvdata(func, glue); @@ -292,7 +291,7 @@ static int wl1271_probe(struct sdio_func *func, memset(res, 0x00, sizeof(res)); - res[0].start = wlan_data->irq; + res[0].start = pdev_data->pdata->irq; res[0].flags = IORESOURCE_IRQ; res[0].name = "irq"; @@ -302,8 +301,6 @@ static int wl1271_probe(struct sdio_func *func, goto out_dev_put; } - pdev_data->pdata = wlan_data; - ret = platform_device_add_data(glue->core, pdev_data, sizeof(*pdev_data)); if (ret) { diff --git a/drivers/net/wireless/ti/wlcore/spi.c b/drivers/net/wireless/ti/wlcore/spi.c index d437f4d28bd0..d62a20b99190 100644 --- a/drivers/net/wireless/ti/wlcore/spi.c +++ b/drivers/net/wireless/ti/wlcore/spi.c @@ -327,23 +327,23 @@ static struct wl1271_if_operations spi_ops = { static int wl1271_probe(struct spi_device *spi) { struct wl12xx_spi_glue *glue; - struct wl12xx_platform_data *pdata; struct wlcore_platdev_data *pdev_data; struct resource res[1]; int ret = -ENOMEM; - pdata = spi->dev.platform_data; - if (!pdata) { - dev_err(&spi->dev, "no platform data\n"); - return -ENODEV; - } - pdev_data = kzalloc(sizeof(*pdev_data), GFP_KERNEL); if (!pdev_data) { dev_err(&spi->dev, "can't allocate platdev_data\n"); goto out; } + pdev_data->pdata = spi->dev.platform_data; + if (!pdev_data->pdata) { + dev_err(&spi->dev, "no platform data\n"); + ret = -ENODEV; + goto out_free_pdev_data; + } + pdev_data->if_ops = &spi_ops; glue = kzalloc(sizeof(*glue), GFP_KERNEL); @@ -387,8 +387,6 @@ static int wl1271_probe(struct spi_device *spi) goto out_dev_put; } - pdev_data->pdata = pdata; - ret = platform_device_add_data(glue->core, pdev_data, sizeof(*pdev_data)); if (ret) { From 06ab4058ea418d8503458bea386961b9dd554356 Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Wed, 23 Jan 2013 16:40:37 +0200 Subject: [PATCH 049/209] wlcore: use PLATFORM_DEVID_AUTO for plat dev creation to avoid conflicts The platform devices can be created by both wlcore_sdio and wlcore_spi. Theoretically, if both are connected to the same board, there will be a conflict. Reported-by: Felipe Balbi Signed-off-by: Luciano Coelho --- drivers/net/wireless/ti/wlcore/sdio.c | 2 +- drivers/net/wireless/ti/wlcore/spi.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ti/wlcore/sdio.c b/drivers/net/wireless/ti/wlcore/sdio.c index 6d2884f040c7..198028df6f4b 100644 --- a/drivers/net/wireless/ti/wlcore/sdio.c +++ b/drivers/net/wireless/ti/wlcore/sdio.c @@ -280,7 +280,7 @@ static int wl1271_probe(struct sdio_func *func, else chip_family = "wl12xx"; - glue->core = platform_device_alloc(chip_family, -1); + glue->core = platform_device_alloc(chip_family, PLATFORM_DEVID_AUTO); if (!glue->core) { dev_err(glue->dev, "can't allocate platform_device"); ret = -ENOMEM; diff --git a/drivers/net/wireless/ti/wlcore/spi.c b/drivers/net/wireless/ti/wlcore/spi.c index d62a20b99190..5ad2e100e59b 100644 --- a/drivers/net/wireless/ti/wlcore/spi.c +++ b/drivers/net/wireless/ti/wlcore/spi.c @@ -366,7 +366,7 @@ static int wl1271_probe(struct spi_device *spi) goto out_free_glue; } - glue->core = platform_device_alloc("wl12xx", -1); + glue->core = platform_device_alloc("wl12xx", PLATFORM_DEVID_AUTO); if (!glue->core) { dev_err(glue->dev, "can't allocate platform_device\n"); ret = -ENOMEM; From 6cc9efed707c575a9e5880ea68f8b9d36b235f1f Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Fri, 25 Jan 2013 12:05:34 +0200 Subject: [PATCH 050/209] wlcore: move wl12xx_platform_data up and make it truly optional The platform data is used not only by wlcore-based drivers, but also by wl1251. Move it up in the directory hierarchy to reflect this. Additionally, make it truly optional. At the moment, disabling platform data while wl1251_sdio or wlcore_sdio are enabled doesn't work, but it will be necessary when device tree support is implemented. Signed-off-by: Luciano Coelho Reviewed-by: Felipe Balbi --- arch/arm/mach-omap2/board-omap3evm.c | 10 +++++----- drivers/net/wireless/ti/Kconfig | 9 +++++++++ drivers/net/wireless/ti/Makefile | 4 +++- ...xx_platform_data.c => wilink_platform_data.c} | 0 drivers/net/wireless/ti/wlcore/Kconfig | 5 ----- drivers/net/wireless/ti/wlcore/Makefile | 3 --- include/linux/wl12xx.h | 16 ++++++++++++---- 7 files changed, 29 insertions(+), 18 deletions(-) rename drivers/net/wireless/ti/{wlcore/wl12xx_platform_data.c => wilink_platform_data.c} (100%) diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 3985f35aee06..a4ca63ba7faa 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -309,7 +309,7 @@ static struct omap2_hsmmc_info mmc[] = { .gpio_wp = 63, .deferred = true, }, -#ifdef CONFIG_WL12XX_PLATFORM_DATA +#ifdef CONFIG_WILINK_PLATFORM_DATA { .name = "wl1271", .mmc = 2, @@ -450,7 +450,7 @@ static struct regulator_init_data omap3evm_vio = { .consumer_supplies = omap3evm_vio_supply, }; -#ifdef CONFIG_WL12XX_PLATFORM_DATA +#ifdef CONFIG_WILINK_PLATFORM_DATA #define OMAP3EVM_WLAN_PMENA_GPIO (150) #define OMAP3EVM_WLAN_IRQ_GPIO (149) @@ -563,7 +563,7 @@ static struct omap_board_mux omap35x_board_mux[] __initdata = { OMAP_PIN_OFF_NONE), OMAP3_MUX(GPMC_WAIT2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_NONE), -#ifdef CONFIG_WL12XX_PLATFORM_DATA +#ifdef CONFIG_WILINK_PLATFORM_DATA /* WLAN IRQ - GPIO 149 */ OMAP3_MUX(UART1_RTS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), @@ -601,7 +601,7 @@ static struct omap_board_mux omap36x_board_mux[] __initdata = { OMAP3_MUX(SYS_BOOT4, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE), OMAP3_MUX(SYS_BOOT5, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE), OMAP3_MUX(SYS_BOOT6, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE), -#ifdef CONFIG_WL12XX_PLATFORM_DATA +#ifdef CONFIG_WILINK_PLATFORM_DATA /* WLAN IRQ - GPIO 149 */ OMAP3_MUX(UART1_RTS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), @@ -637,7 +637,7 @@ static struct gpio omap3_evm_ehci_gpios[] __initdata = { static void __init omap3_evm_wl12xx_init(void) { -#ifdef CONFIG_WL12XX_PLATFORM_DATA +#ifdef CONFIG_WILINK_PLATFORM_DATA int ret; /* WL12xx WLAN Init */ diff --git a/drivers/net/wireless/ti/Kconfig b/drivers/net/wireless/ti/Kconfig index be800119d0a3..cbe1e7fef61b 100644 --- a/drivers/net/wireless/ti/Kconfig +++ b/drivers/net/wireless/ti/Kconfig @@ -12,4 +12,13 @@ source "drivers/net/wireless/ti/wl18xx/Kconfig" # keep last for automatic dependencies source "drivers/net/wireless/ti/wlcore/Kconfig" + +config WILINK_PLATFORM_DATA + bool "TI WiLink platform data" + depends on WLCORE_SDIO || WL1251_SDIO + default y + ---help--- + Small platform data bit needed to pass data to the sdio modules. + + endif # WL_TI diff --git a/drivers/net/wireless/ti/Makefile b/drivers/net/wireless/ti/Makefile index 4d6823983c04..af14231aeede 100644 --- a/drivers/net/wireless/ti/Makefile +++ b/drivers/net/wireless/ti/Makefile @@ -1,5 +1,7 @@ obj-$(CONFIG_WLCORE) += wlcore/ obj-$(CONFIG_WL12XX) += wl12xx/ -obj-$(CONFIG_WL12XX_PLATFORM_DATA) += wlcore/ obj-$(CONFIG_WL1251) += wl1251/ obj-$(CONFIG_WL18XX) += wl18xx/ + +# small builtin driver bit +obj-$(CONFIG_WILINK_PLATFORM_DATA) += wilink_platform_data.o diff --git a/drivers/net/wireless/ti/wlcore/wl12xx_platform_data.c b/drivers/net/wireless/ti/wilink_platform_data.c similarity index 100% rename from drivers/net/wireless/ti/wlcore/wl12xx_platform_data.c rename to drivers/net/wireless/ti/wilink_platform_data.c diff --git a/drivers/net/wireless/ti/wlcore/Kconfig b/drivers/net/wireless/ti/wlcore/Kconfig index d7b907e67170..2b832825c3d4 100644 --- a/drivers/net/wireless/ti/wlcore/Kconfig +++ b/drivers/net/wireless/ti/wlcore/Kconfig @@ -33,8 +33,3 @@ config WLCORE_SDIO If you choose to build a module, it'll be called wlcore_sdio. Say N if unsure. - -config WL12XX_PLATFORM_DATA - bool - depends on WLCORE_SDIO != n || WL1251_SDIO != n - default y diff --git a/drivers/net/wireless/ti/wlcore/Makefile b/drivers/net/wireless/ti/wlcore/Makefile index d9fba9e32130..b21398f6c3ec 100644 --- a/drivers/net/wireless/ti/wlcore/Makefile +++ b/drivers/net/wireless/ti/wlcore/Makefile @@ -9,7 +9,4 @@ obj-$(CONFIG_WLCORE) += wlcore.o obj-$(CONFIG_WLCORE_SPI) += wlcore_spi.o obj-$(CONFIG_WLCORE_SDIO) += wlcore_sdio.o -# small builtin driver bit -obj-$(CONFIG_WL12XX_PLATFORM_DATA) += wl12xx_platform_data.o - ccflags-y += -D__CHECK_ENDIAN__ diff --git a/include/linux/wl12xx.h b/include/linux/wl12xx.h index 360c9bce665c..a54fe82e704b 100644 --- a/include/linux/wl12xx.h +++ b/include/linux/wl12xx.h @@ -24,6 +24,8 @@ #ifndef _LINUX_WL12XX_H #define _LINUX_WL12XX_H +#include + /* Reference clock values */ enum { WL12XX_REFCLOCK_19 = 0, /* 19.2 MHz */ @@ -60,10 +62,12 @@ struct wl12xx_platform_data { /* Platform does not support level trigger interrupts */ #define WL12XX_PLATFORM_QUIRK_EDGE_IRQ BIT(0) -#ifdef CONFIG_WL12XX_PLATFORM_DATA +#ifdef CONFIG_WILINK_PLATFORM_DATA int wl12xx_set_platform_data(const struct wl12xx_platform_data *data); +struct wl12xx_platform_data *wl12xx_get_platform_data(void); + #else static inline @@ -72,8 +76,12 @@ int wl12xx_set_platform_data(const struct wl12xx_platform_data *data) return -ENOSYS; } -#endif - -struct wl12xx_platform_data *wl12xx_get_platform_data(void); +static inline +struct wl12xx_platform_data *wl12xx_get_platform_data(void) +{ + return ERR_PTR(-ENODATA); +} + +#endif #endif From 5dc283fe9ab360433aa05fcbe0f43cad40f68774 Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Wed, 30 Jan 2013 10:53:14 +0200 Subject: [PATCH 051/209] wlcore: don't hide real error code when booting fails There's no need to hide the actual error that was reported when booting fails. For instance, on I/O error, we were returing -EINVALID, which doesn't make sense at all. Signed-off-by: Luciano Coelho --- drivers/net/wireless/ti/wlcore/main.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index cd70335cd5e8..28a37576d568 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -2162,7 +2162,7 @@ static int wl12xx_init_vif_data(struct wl1271 *wl, struct ieee80211_vif *vif) return 0; } -static bool wl12xx_init_fw(struct wl1271 *wl) +static int wl12xx_init_fw(struct wl1271 *wl) { int retries = WL1271_BOOT_RETRIES; bool booted = false; @@ -2228,7 +2228,7 @@ power_off: wl->state = WLCORE_STATE_ON; out: - return booted; + return ret; } static bool wl12xx_dev_role_started(struct wl12xx_vif *wlvif) @@ -2371,7 +2371,6 @@ static int wl1271_op_add_interface(struct ieee80211_hw *hw, struct vif_counter_data vif_count; int ret = 0; u8 role_type; - bool booted = false; vif->driver_flags |= IEEE80211_VIF_BEACON_FILTER | IEEE80211_VIF_SUPPORTS_CQM_RSSI; @@ -2432,11 +2431,9 @@ static int wl1271_op_add_interface(struct ieee80211_hw *hw, */ memcpy(wl->addresses[0].addr, vif->addr, ETH_ALEN); - booted = wl12xx_init_fw(wl); - if (!booted) { - ret = -EINVAL; + ret = wl12xx_init_fw(wl); + if (ret < 0) goto out; - } } ret = wl12xx_cmd_role_enable(wl, vif->addr, From 1d6146659ef7ae10263d490a9554ff0bfc7f6ecd Mon Sep 17 00:00:00 2001 From: Victor Goldenshtein Date: Thu, 27 Dec 2012 15:49:47 +0200 Subject: [PATCH 052/209] wl18xx: add new phy configuration parameters for telec support Add back-off settings to the wl18xx_mac_and_phy_params. We had an empty space where the new parameters are added, so this change doesn't affect backwards-compatibility with older firmwares. Update WL18XX_CONF_VERSION accordingly. Signed-off-by: Victor Goldenshtein Signed-off-by: Luciano Coelho --- drivers/net/wireless/ti/wl18xx/conf.h | 7 ++++--- drivers/net/wireless/ti/wl18xx/main.c | 5 +++++ 2 files changed, 9 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/ti/wl18xx/conf.h b/drivers/net/wireless/ti/wl18xx/conf.h index b5f114857191..e34302e3b51d 100644 --- a/drivers/net/wireless/ti/wl18xx/conf.h +++ b/drivers/net/wireless/ti/wl18xx/conf.h @@ -23,7 +23,7 @@ #define __WL18XX_CONF_H__ #define WL18XX_CONF_MAGIC 0x10e100ca -#define WL18XX_CONF_VERSION (WLCORE_CONF_VERSION | 0x0005) +#define WL18XX_CONF_VERSION (WLCORE_CONF_VERSION | 0x0006) #define WL18XX_CONF_MASK 0x0000ffff #define WL18XX_CONF_SIZE (WLCORE_CONF_SIZE + \ sizeof(struct wl18xx_priv_conf)) @@ -70,8 +70,9 @@ struct wl18xx_mac_and_phy_params { u8 pwr_limit_reference_11_abg; u8 per_chan_pwr_limit_arr_11p[NUM_OF_CHANNELS_11_P]; u8 pwr_limit_reference_11p; - u8 spare1[9]; - u8 spare2[9]; + u8 spare1; + u8 per_chan_bo_mode_11_abg[13]; + u8 per_chan_bo_mode_11_p[4]; u8 primary_clock_setting_time; u8 clock_valid_on_wake_up; u8 secondary_clock_setting_time; diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index 0be1cfc17a86..a10b7a7a215a 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -547,6 +547,11 @@ static struct wl18xx_priv_conf wl18xx_default_priv_conf = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }, .pwr_limit_reference_11p = 0x64, + .per_chan_bo_mode_11_abg = { 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00 }, + .per_chan_bo_mode_11_p = { 0x00, 0x00, 0x00, 0x00 }, .per_chan_pwr_limit_arr_11p = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }, .psat = 0, From 9c3a8d99346040010a82ae8088b055f85cf8a2e9 Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Thu, 7 Feb 2013 11:35:33 +0200 Subject: [PATCH 053/209] wlcore: fix wrong remote rates when starting STA role In wl18xx, we use a new ACX command in order to set the remote supported rates, once we know it (ie. after association). The wl12xx firmware doesn't support changing the rates after the STA is started, so we need to use all supported rates. Commit 530abe19 (wlcore: add ACX_PEER_CAP command) broke that by using wlvif->rate_set when starting the STA role. Signed-off-by: Luciano Coelho --- drivers/net/wireless/ti/wlcore/cmd.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/ti/wlcore/cmd.c b/drivers/net/wireless/ti/wlcore/cmd.c index 1201aca9c89a..6331f9e1cb39 100644 --- a/drivers/net/wireless/ti/wlcore/cmd.c +++ b/drivers/net/wireless/ti/wlcore/cmd.c @@ -510,10 +510,12 @@ int wl12xx_cmd_role_start_sta(struct wl1271 *wl, struct wl12xx_vif *wlvif) cmd->sta.hlid = wlvif->sta.hlid; cmd->sta.session = wl->session_ids[wlvif->sta.hlid]; /* - * We don't have the correct remote rates in this stage. the rates - * will be reconfigured later, after authorization. + * We don't have the correct remote rates in this stage. The + * rates will be reconfigured later, after association, if the + * firmware supports ACX_PEER_CAP. Otherwise, there's nothing + * we can do, so use all supported_rates here. */ - cmd->sta.remote_rates = cpu_to_le32(wlvif->rate_set); + cmd->sta.remote_rates = cpu_to_le32(supported_rates); wl1271_debug(DEBUG_CMD, "role start: roleid=%d, hlid=%d, session=%d " "basic_rate_set: 0x%x, remote_rates: 0x%x", From e0af11fa0df30bc645e6abb4d3ddc7ed05af0451 Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Mon, 14 Jan 2013 20:35:22 +0100 Subject: [PATCH 054/209] NFC: microread: Add MEI physical layer On some peculiar worlds, microreads are found hidden behind MEIs and needs to be accessed through the ME bus. Signed-off-by: Samuel Ortiz --- drivers/nfc/microread/Kconfig | 11 ++ drivers/nfc/microread/Makefile | 2 + drivers/nfc/microread/mei.c | 241 +++++++++++++++++++++++++++++++++ 3 files changed, 254 insertions(+) create mode 100644 drivers/nfc/microread/mei.c diff --git a/drivers/nfc/microread/Kconfig b/drivers/nfc/microread/Kconfig index cd6744bc8db6..572305be6e37 100644 --- a/drivers/nfc/microread/Kconfig +++ b/drivers/nfc/microread/Kconfig @@ -22,3 +22,14 @@ config NFC_MICROREAD_I2C If you choose to build a module, it'll be called microread_i2c. Say N if unsure. + +config NFC_MICROREAD_MEI + tristate "NFC Microread MEI support" + depends on NFC_MICROREAD && INTEL_MEI_BUS_NFC + ---help--- + This module adds support for the mei interface of adapters using + Inside microread chipsets. Select this if your microread chipset + is handled by Intel's Management Engine Interface on your platform. + + If you choose to build a module, it'll be called microread_mei. + Say N if unsure. diff --git a/drivers/nfc/microread/Makefile b/drivers/nfc/microread/Makefile index 74c185165ebf..755c24cba253 100644 --- a/drivers/nfc/microread/Makefile +++ b/drivers/nfc/microread/Makefile @@ -3,6 +3,8 @@ # microread_i2c-objs = i2c.o +microread_mei-objs = mei.o obj-$(CONFIG_NFC_MICROREAD) += microread.o obj-$(CONFIG_NFC_MICROREAD_I2C) += microread_i2c.o +obj-$(CONFIG_NFC_MICROREAD_MEI) += microread_mei.o diff --git a/drivers/nfc/microread/mei.c b/drivers/nfc/microread/mei.c new file mode 100644 index 000000000000..c078e56d7d14 --- /dev/null +++ b/drivers/nfc/microread/mei.c @@ -0,0 +1,241 @@ +/* + * HCI based Driver for Inside Secure microread NFC Chip + * + * Copyright (C) 2013 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "microread.h" + +#define MICROREAD_DRIVER_NAME "microread" + +#define MICROREAD_UUID UUID_LE(0x0bb17a78, 0x2a8e, 0x4c50, 0x94, \ + 0xd4, 0x50, 0x26, 0x67, 0x23, 0x77, 0x5c) + +struct mei_nfc_hdr { + u8 cmd; + u8 status; + u16 req_id; + u32 reserved; + u16 data_size; +} __attribute__((packed)); + +#define MEI_NFC_HEADER_SIZE 10 +#define MEI_NFC_MAX_HCI_PAYLOAD 300 +#define MEI_NFC_MAX_READ (MEI_NFC_HEADER_SIZE + MEI_NFC_MAX_HCI_PAYLOAD) + +struct microread_mei_phy { + struct mei_bus_client *client; + struct nfc_hci_dev *hdev; + + int powered; + + int hard_fault; /* + * < 0 if hardware error occured (e.g. i2c err) + * and prevents normal operation. + */ +}; + +#define MEI_DUMP_SKB_IN(info, skb) \ +do { \ + pr_debug("%s:\n", info); \ + print_hex_dump(KERN_DEBUG, "mei in : ", DUMP_PREFIX_OFFSET, \ + 16, 1, (skb)->data, (skb)->len, 0); \ +} while (0) + +#define MEI_DUMP_SKB_OUT(info, skb) \ +do { \ + pr_debug("%s:\n", info); \ + print_hex_dump(KERN_DEBUG, "mei out: ", DUMP_PREFIX_OFFSET, \ + 16, 1, (skb)->data, (skb)->len, 0); \ +} while (0) + +static int microread_mei_enable(void *phy_id) +{ + struct microread_mei_phy *phy = phy_id; + + pr_info(DRIVER_DESC ": %s\n", __func__); + + phy->powered = 1; + + return 0; +} + +static void microread_mei_disable(void *phy_id) +{ + struct microread_mei_phy *phy = phy_id; + + pr_info(DRIVER_DESC ": %s\n", __func__); + + phy->powered = 0; +} + +/* + * Writing a frame must not return the number of written bytes. + * It must return either zero for success, or <0 for error. + * In addition, it must not alter the skb + */ +static int microread_mei_write(void *phy_id, struct sk_buff *skb) +{ + struct microread_mei_phy *phy = phy_id; + int r; + + MEI_DUMP_SKB_OUT("mei frame sent", skb); + + r = mei_bus_send(phy->client, skb->data, skb->len); + if (r > 0) + r = 0; + + return r; +} + +static void microread_event_cb(struct mei_bus_client *client, u32 events, + void *context) +{ + struct microread_mei_phy *phy = context; + + if (phy->hard_fault != 0) + return; + + if (events & BIT(MEI_BUS_EVENT_RX)) { + struct sk_buff *skb; + int reply_size; + + skb = alloc_skb(MEI_NFC_MAX_READ, GFP_KERNEL); + if (!skb) + return; + + reply_size = mei_bus_recv(client, skb->data, MEI_NFC_MAX_READ); + if (reply_size < MEI_NFC_HEADER_SIZE) { + kfree(skb); + return; + } + + skb_put(skb, reply_size); + skb_pull(skb, MEI_NFC_HEADER_SIZE); + + MEI_DUMP_SKB_IN("mei frame read", skb); + + nfc_hci_recv_frame(phy->hdev, skb); + } +} + +static struct nfc_phy_ops mei_phy_ops = { + .write = microread_mei_write, + .enable = microread_mei_enable, + .disable = microread_mei_disable, +}; + +static int microread_mei_probe(struct mei_bus_client *client) +{ + struct microread_mei_phy *phy; + int r; + + pr_info("Probing NFC microread\n"); + + phy = kzalloc(sizeof(struct microread_mei_phy), GFP_KERNEL); + if (!phy) { + pr_err("Cannot allocate memory for microread mei phy.\n"); + return -ENOMEM; + } + + phy->client = client; + mei_bus_set_clientdata(client, phy); + + r = mei_bus_register_event_cb(client, microread_event_cb, phy); + if (r) { + pr_err(MICROREAD_DRIVER_NAME ": event cb registration failed\n"); + goto err_out; + } + + r = microread_probe(phy, &mei_phy_ops, LLC_NOP_NAME, + MEI_NFC_HEADER_SIZE, 0, MEI_NFC_MAX_HCI_PAYLOAD, + &phy->hdev); + if (r < 0) + goto err_out; + + return 0; + +err_out: + kfree(phy); + + return r; +} + +static int microread_mei_remove(struct mei_bus_client *client) +{ + struct microread_mei_phy *phy = mei_bus_get_clientdata(client); + + pr_info("Removing microread\n"); + + microread_remove(phy->hdev); + + if (phy->powered) + microread_mei_disable(phy); + + kfree(phy); + + return 0; +} + +static struct mei_bus_driver microread_driver = { + .driver = { + .name = MICROREAD_DRIVER_NAME, + }, + .id = { + .name = MICROREAD_DRIVER_NAME, + .uuid = MICROREAD_UUID, + }, + + .probe = microread_mei_probe, + .remove = microread_mei_remove, +}; + +static int microread_mei_init(void) +{ + int r; + + pr_debug(DRIVER_DESC ": %s\n", __func__); + + r = mei_driver_register(µread_driver); + if (r) { + pr_err(MICROREAD_DRIVER_NAME ": driver registration failed\n"); + return r; + } + + return 0; +} + +static void microread_mei_exit(void) +{ + mei_driver_unregister(µread_driver); +} + +module_init(microread_mei_init); +module_exit(microread_mei_exit); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION(DRIVER_DESC); From 52f2eaeec11c16c219f0e99b8496fbba86889830 Mon Sep 17 00:00:00 2001 From: Thierry Escande Date: Tue, 5 Feb 2013 10:08:35 +0100 Subject: [PATCH 055/209] NFC: pn533: Fix target polling mode Remove unneeded bitwise OR operator on uninitialized sk_buff data Signed-off-by: Thierry Escande Signed-off-by: Samuel Ortiz --- drivers/nfc/pn533.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index bd5c41b481d3..f0f6763d67ae 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -1378,7 +1378,7 @@ static struct sk_buff *pn533_alloc_poll_tg_frame(struct pn533 *dev) return NULL; /* DEP support only */ - *skb_put(skb, 1) |= PN533_INIT_TARGET_DEP; + *skb_put(skb, 1) = PN533_INIT_TARGET_DEP; /* MIFARE params */ memcpy(skb_put(skb, 6), mifare_params, 6); From e9a4aa3ba386c8a368baaadde6f9e5c3d5f17cfe Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 31 Jan 2013 11:16:46 +0300 Subject: [PATCH 056/209] NFC: llcp: integer underflow in nfc_llcp_set_remote_gb() If gb_len is less than 3 it would cause an integer underflow and possibly memory corruption in nfc_llcp_parse_gb_tlv(). I removed the old test for gb_len == 0. I also removed the test for ->remote_gb == NULL. It's not possible for ->remote_gb to be NULL and we have already dereferenced ->remote_gb_len so it's too late to test. The old test return -ENODEV but my test returns -EINVAL. Signed-off-by: Dan Carpenter Signed-off-by: John W. Linville --- net/nfc/llcp/llcp.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/net/nfc/llcp/llcp.c b/net/nfc/llcp/llcp.c index 85bc75c38dea..746f5a2f9804 100644 --- a/net/nfc/llcp/llcp.c +++ b/net/nfc/llcp/llcp.c @@ -549,14 +549,13 @@ int nfc_llcp_set_remote_gb(struct nfc_dev *dev, u8 *gb, u8 gb_len) pr_err("No LLCP device\n"); return -ENODEV; } + if (gb_len < 3) + return -EINVAL; memset(local->remote_gb, 0, NFC_MAX_GT_LEN); memcpy(local->remote_gb, gb, gb_len); local->remote_gb_len = gb_len; - if (local->remote_gb == NULL || local->remote_gb_len == 0) - return -ENODEV; - if (memcmp(local->remote_gb, llcp_magic, 3)) { pr_err("MAC does not support LLCP\n"); return -EINVAL; From 12b6639897fa57a1ca34b43d078779c92472ad74 Mon Sep 17 00:00:00 2001 From: Xose Vazquez Perez Date: Sat, 2 Feb 2013 03:33:44 +0100 Subject: [PATCH 057/209] wireless: rt2x00: rt2800usb add Sweex ids Info coming from Sweex Windows driver and wikidevi.com 0x177f,0x0163 Sweex LW163 RT3370 1x1, int. antenna 0x177f,0x0164 Sweex LW164 RT8070 1x1, Nano dongle 0x177f,0x0165 Sweex LW165 RT3370 1x1, ext. antenna 0x177f,0x0324 Sweex LW324 RT3072 2x2 with 32Mb NOR flash, autoinstall Cc: Ivo van Doorn Cc: Gertjan van Wingerde Cc: Helmut Schaa Cc: John W. Linville Cc: users@rt2x00.serialmonkey.com Cc: linux-wireless@vger.kernel.org Signed-off-by: Xose Vazquez Perez Acked-by: Gertjan van Wingerde Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2800usb.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index 42b5b659af16..8a57646925a8 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -1099,9 +1099,11 @@ static struct usb_device_id rt2800usb_device_table[] = { { USB_DEVICE(0x15a9, 0x0006) }, /* Sweex */ { USB_DEVICE(0x177f, 0x0153) }, + { USB_DEVICE(0x177f, 0x0164) }, { USB_DEVICE(0x177f, 0x0302) }, { USB_DEVICE(0x177f, 0x0313) }, { USB_DEVICE(0x177f, 0x0323) }, + { USB_DEVICE(0x177f, 0x0324) }, /* U-Media */ { USB_DEVICE(0x157e, 0x300e) }, { USB_DEVICE(0x157e, 0x3013) }, @@ -1133,6 +1135,9 @@ static struct usb_device_id rt2800usb_device_table[] = { { USB_DEVICE(0x148f, 0x8070) }, /* Sitecom */ { USB_DEVICE(0x0df6, 0x0050) }, + /* Sweex */ + { USB_DEVICE(0x177f, 0x0163) }, + { USB_DEVICE(0x177f, 0x0165) }, #endif #ifdef CONFIG_RT2800USB_RT35XX /* Allwin */ From e48caab206c853272637427d9ae82fc431b4bd24 Mon Sep 17 00:00:00 2001 From: Cong Ding Date: Mon, 4 Feb 2013 22:43:22 +0100 Subject: [PATCH 058/209] net: wireless/rtlwifi: fix uninitialized variable issue The use of variable packet_beacon might be uninitialized in the two files, which is same as this patch: https://patchwork.kernel.org/patch/2006711/ Signed-off-by: Cong Ding Signed-off-by: John W. Linville --- drivers/net/wireless/rtlwifi/rtl8192ce/trx.c | 2 +- drivers/net/wireless/rtlwifi/rtl8192cu/mac.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/trx.c b/drivers/net/wireless/rtlwifi/rtl8192ce/trx.c index c31795e379f7..da0e9022a99a 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192ce/trx.c +++ b/drivers/net/wireless/rtlwifi/rtl8192ce/trx.c @@ -488,7 +488,7 @@ static void _rtl92ce_translate_rx_signal_stuff(struct ieee80211_hw *hw, u8 *praddr; __le16 fc; u16 type, c_fc; - bool packet_matchbssid, packet_toself, packet_beacon; + bool packet_matchbssid, packet_toself, packet_beacon = false; tmp_buf = skb->data + pstats->rx_drvinfo_size + pstats->rx_bufshift; diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/mac.c b/drivers/net/wireless/rtlwifi/rtl8192cu/mac.c index 32ff959a0251..85b6bdb163c0 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192cu/mac.c +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/mac.c @@ -1084,7 +1084,7 @@ void rtl92c_translate_rx_signal_stuff(struct ieee80211_hw *hw, u8 *praddr; __le16 fc; u16 type, cpu_fc; - bool packet_matchbssid, packet_toself, packet_beacon; + bool packet_matchbssid, packet_toself, packet_beacon = false; tmp_buf = skb->data + pstats->rx_drvinfo_size + pstats->rx_bufshift; hdr = (struct ieee80211_hdr *)tmp_buf; From fc5bc165b030dc8f20d69bcf46f86c9b52eb481a Mon Sep 17 00:00:00 2001 From: Jonas Gorski Date: Tue, 5 Feb 2013 16:59:17 +0100 Subject: [PATCH 059/209] mwl8k: add single band 88W8366 PCI device IDs Add PCI deviceIDs for single band versions of 88W8366, found e.g. in simultaneous dual band routers based on kirkwood. Signed-off-by: Jonas Gorski Signed-off-by: John W. Linville --- drivers/net/wireless/mwl8k.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index 2031130d860b..51634f20539c 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -5473,6 +5473,8 @@ static DEFINE_PCI_DEVICE_TABLE(mwl8k_pci_id_table) = { { PCI_VDEVICE(MARVELL, 0x2a2b), .driver_data = MWL8687, }, { PCI_VDEVICE(MARVELL, 0x2a30), .driver_data = MWL8687, }, { PCI_VDEVICE(MARVELL, 0x2a40), .driver_data = MWL8366, }, + { PCI_VDEVICE(MARVELL, 0x2a41), .driver_data = MWL8366, }, + { PCI_VDEVICE(MARVELL, 0x2a42), .driver_data = MWL8366, }, { PCI_VDEVICE(MARVELL, 0x2a43), .driver_data = MWL8366, }, { }, }; From 008e33f733ca51acb2dd9d88ea878693b04d1d2a Mon Sep 17 00:00:00 2001 From: Tomasz Guszkowski Date: Tue, 5 Feb 2013 22:10:31 +0100 Subject: [PATCH 060/209] p54usb: corrected USB ID for T-Com Sinus 154 data II Corrected USB ID for T-Com Sinus 154 data II. ISL3887-based. The device was tested in managed mode with no security, WEP 128 bit and WPA-PSK (TKIP) with firmware 2.13.1.0.lm87.arm (md5sum: 7d676323ac60d6e1a3b6d61e8c528248). It works. Signed-off-by: Tomasz Guszkowski Cc: Acked-By: Christian Lamparter Signed-off-by: John W. Linville --- drivers/net/wireless/p54/p54usb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c index 800a16526c8e..1f7858588919 100644 --- a/drivers/net/wireless/p54/p54usb.c +++ b/drivers/net/wireless/p54/p54usb.c @@ -84,8 +84,8 @@ static struct usb_device_id p54u_table[] = { {USB_DEVICE(0x06b9, 0x0121)}, /* Thomson SpeedTouch 121g */ {USB_DEVICE(0x0707, 0xee13)}, /* SMC 2862W-G version 2 */ {USB_DEVICE(0x0803, 0x4310)}, /* Zoom 4410a */ - {USB_DEVICE(0x083a, 0x4503)}, /* T-Com Sinus 154 data II */ {USB_DEVICE(0x083a, 0x4521)}, /* Siemens Gigaset USB Adapter 54 version 2 */ + {USB_DEVICE(0x083a, 0x4531)}, /* T-Com Sinus 154 data II */ {USB_DEVICE(0x083a, 0xc501)}, /* Zoom Wireless-G 4410 */ {USB_DEVICE(0x083a, 0xf503)}, /* Accton FD7050E ver 1010ec */ {USB_DEVICE(0x0846, 0x4240)}, /* Netgear WG111 (v2) */ From 05dde977bfe35a5c9816763fa9c26732e10b8a5b Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Wed, 6 Feb 2013 18:40:36 +0100 Subject: [PATCH 061/209] brcmfmac: Remove drvr_up from bus interface. The tracking of up/down status in bus interface is unnecessary. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- .../net/wireless/brcm80211/brcmfmac/dhd_bus.h | 2 -- .../net/wireless/brcm80211/brcmfmac/dhd_linux.c | 16 +--------------- .../net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 6 +----- 3 files changed, 2 insertions(+), 22 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h index 64c38f4226a3..57826dcbe9b9 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h @@ -72,7 +72,6 @@ struct brcmf_bus_ops { * @drvr: public driver information. * @state: operational state of the bus interface. * @maxctl: maximum size for rxctl request message. - * @drvr_up: indicates driver up/down status. * @tx_realloc: number of tx packets realloced for headroom. * @dstats: dongle-based statistical data. * @align: alignment requirement for the bus. @@ -87,7 +86,6 @@ struct brcmf_bus { struct brcmf_pub *drvr; enum brcmf_bus_state state; uint maxctl; - bool drvr_up; unsigned long tx_realloc; struct dngl_stats dstats; u8 align; diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c index e3326a58bdb1..2104a4fb9e28 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c @@ -452,13 +452,7 @@ static int brcmf_ethtool(struct brcmf_if *ifp, void __user *uaddr) sprintf(info.driver, "dhd"); strcpy(info.version, BRCMF_VERSION_STR); } - - /* otherwise, require dongle to be up */ - else if (!drvr->bus_if->drvr_up) { - brcmf_err("dongle is not up\n"); - return -ENODEV; - } - /* finally, report dongle driver type */ + /* report dongle driver type */ else sprintf(info.driver, "wl"); @@ -545,18 +539,11 @@ static int brcmf_netdev_ioctl_entry(struct net_device *ndev, struct ifreq *ifr, static int brcmf_netdev_stop(struct net_device *ndev) { - struct brcmf_if *ifp = netdev_priv(ndev); - struct brcmf_pub *drvr = ifp->drvr; - brcmf_dbg(TRACE, "Enter\n"); - if (drvr->bus_if->drvr_up == 0) - return 0; - brcmf_cfg80211_down(ndev); /* Set state and stop OS transmissions */ - drvr->bus_if->drvr_up = false; netif_stop_queue(ndev); return 0; @@ -591,7 +578,6 @@ static int brcmf_netdev_open(struct net_device *ndev) /* Allow transmit calls */ netif_start_queue(ndev); - drvr->bus_if->drvr_up = true; if (brcmf_cfg80211_up(ndev)) { brcmf_err("failed to bring up cfg80211\n"); return -1; diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c index 7fef9b5ba003..df8a18571951 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c @@ -1962,8 +1962,7 @@ static uint brcmf_sdbrcm_sendfromq(struct brcmf_sdio *bus, uint maxframes) } /* Deflow-control stack if needed */ - if (bus->sdiodev->bus_if->drvr_up && - (bus->sdiodev->bus_if->state == BRCMF_BUS_DATA) && + if ((bus->sdiodev->bus_if->state == BRCMF_BUS_DATA) && bus->txoff && (pktq_len(&bus->txq) < TXLOW)) { bus->txoff = false; brcmf_txflowblock(bus->sdiodev->dev, false); @@ -3308,9 +3307,6 @@ static int brcmf_sdbrcm_download_nvram(struct brcmf_sdio *bus) { int ret; - if (bus->sdiodev->bus_if->drvr_up) - return -EISCONN; - ret = request_firmware(&bus->firmware, BRCMF_SDIO_NV_NAME, &bus->sdiodev->func[2]->dev); if (ret) { From 4412f6cb8139a4503f77b67c3b6a18883a4b6191 Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Wed, 6 Feb 2013 18:40:37 +0100 Subject: [PATCH 062/209] brcmfmac: Remove copy mac address from drvr at netdev up. At netdev up the mac address from drvr is copied to netdev mac address. This is incorrect and mac address was already set by brcmf_net_attach by copying it from ifp. Reviewed-by: Arend Van Spriel Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c index 2104a4fb9e28..755412510cd1 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c @@ -567,8 +567,6 @@ static int brcmf_netdev_open(struct net_device *ndev) atomic_set(&drvr->pend_8021x_cnt, 0); - memcpy(ndev->dev_addr, drvr->mac, ETH_ALEN); - /* Get current TOE mode from dongle */ if (brcmf_fil_iovar_int_get(ifp, "toe_ol", &toe_ol) >= 0 && (toe_ol & TOE_TX_CSUM_OL) != 0) From 1f17011039f0d53f24503a01a1dcd48ae28e5305 Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Wed, 6 Feb 2013 18:40:38 +0100 Subject: [PATCH 063/209] brcmfmac: Use struct brcmf_if in brcmf_configure_opensecurity. Reviewed-by: Arend Van Spriel Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 62a528e8b958..0f170cb83c54 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -2968,9 +2968,8 @@ static int brcmf_cfg80211_testmode(struct wiphy *wiphy, void *data, int len) } #endif -static s32 brcmf_configure_opensecurity(struct net_device *ndev, s32 bssidx) +static s32 brcmf_configure_opensecurity(struct brcmf_if *ifp) { - struct brcmf_if *ifp = netdev_priv(ndev); s32 err; /* set auth */ @@ -3433,7 +3432,6 @@ brcmf_cfg80211_start_ap(struct wiphy *wiphy, struct net_device *ndev, struct brcmf_tlv *rsn_ie; struct brcmf_vs_tlv *wpa_ie; struct brcmf_join_params join_params; - s32 bssidx = 0; brcmf_dbg(TRACE, "channel_type=%d, beacon_interval=%d, dtim_period=%d,\n", cfg80211_get_chandef_type(&settings->chandef), @@ -3507,7 +3505,7 @@ brcmf_cfg80211_start_ap(struct wiphy *wiphy, struct net_device *ndev, } } else { brcmf_dbg(TRACE, "No WPA(2) IEs found\n"); - brcmf_configure_opensecurity(ndev, bssidx); + brcmf_configure_opensecurity(ifp); } /* Set Beacon IEs to FW */ err = brcmf_vif_set_mgmt_ie(ndev_to_vif(ndev), From 10ef73215c9fdb0858950707827125bf261acb8f Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Wed, 6 Feb 2013 18:40:39 +0100 Subject: [PATCH 064/209] brcmfmac: Track pending 8021x frames per ifp. Pending 8021x frames were tracked per dongle. This should be done per ifp. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/dhd.h | 7 +++--- .../wireless/brcm80211/brcmfmac/dhd_linux.c | 25 ++++++++++--------- 2 files changed, 17 insertions(+), 15 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h index a2f32fb990fa..f0e81a880fb6 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h @@ -489,9 +489,6 @@ struct brcmf_pub { struct mutex proto_block; unsigned char proto_buf[BRCMF_DCMD_MAXLEN]; - atomic_t pend_8021x_cnt; - wait_queue_head_t pend_8021x_wait; - struct brcmf_fweh_info fweh; #ifdef DEBUG struct dentry *dbgfs_dir; @@ -518,6 +515,8 @@ struct brcmf_cfg80211_vif; * @idx: interface index in device firmware. * @bssidx: index of bss associated with this interface. * @mac_addr: assigned mac address. + * @pend_8021x_cnt: tracks outstanding number of 802.1x frames. + * @pend_8021x_wait: used for signalling change in count. */ struct brcmf_if { struct brcmf_pub *drvr; @@ -529,6 +528,8 @@ struct brcmf_if { int idx; s32 bssidx; u8 mac_addr[ETH_ALEN]; + atomic_t pend_8021x_cnt; + wait_queue_head_t pend_8021x_wait; }; diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c index 755412510cd1..9a4494a5b711 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c @@ -217,7 +217,7 @@ static netdev_tx_t brcmf_netdev_start_xmit(struct sk_buff *skb, if (is_multicast_ether_addr(eh->h_dest)) drvr->tx_multicast++; if (ntohs(eh->h_proto) == ETH_P_PAE) - atomic_inc(&drvr->pend_8021x_cnt); + atomic_inc(&ifp->pend_8021x_cnt); /* If the protocol uses a data header, apply it */ brcmf_proto_hdrpush(drvr, ifp->idx, skb); @@ -348,6 +348,7 @@ void brcmf_txcomplete(struct device *dev, struct sk_buff *txp, bool success) u16 type; struct brcmf_bus *bus_if = dev_get_drvdata(dev); struct brcmf_pub *drvr = bus_if->drvr; + struct brcmf_if *ifp; brcmf_proto_hdrpull(drvr, &ifidx, txp); @@ -355,9 +356,10 @@ void brcmf_txcomplete(struct device *dev, struct sk_buff *txp, bool success) type = ntohs(eh->h_proto); if (type == ETH_P_PAE) { - atomic_dec(&drvr->pend_8021x_cnt); - if (waitqueue_active(&drvr->pend_8021x_wait)) - wake_up(&drvr->pend_8021x_wait); + ifp = drvr->iflist[ifidx]; + atomic_dec(&ifp->pend_8021x_cnt); + if (waitqueue_active(&ifp->pend_8021x_wait)) + wake_up(&ifp->pend_8021x_wait); } } @@ -565,7 +567,7 @@ static int brcmf_netdev_open(struct net_device *ndev) return -EAGAIN; } - atomic_set(&drvr->pend_8021x_cnt, 0); + atomic_set(&ifp->pend_8021x_cnt, 0); /* Get current TOE mode from dongle */ if (brcmf_fil_iovar_int_get(ifp, "toe_ol", &toe_ol) >= 0 @@ -686,6 +688,8 @@ struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, int ifidx, s32 bssidx, INIT_WORK(&ifp->setmacaddr_work, _brcmf_set_mac_address); INIT_WORK(&ifp->multicast_work, _brcmf_set_multicast_list); + init_waitqueue_head(&ifp->pend_8021x_wait); + if (addr_mask != NULL) for (i = 0; i < ETH_ALEN; i++) ifp->mac_addr[i] = drvr->mac[i] ^ addr_mask[i]; @@ -763,8 +767,6 @@ int brcmf_attach(uint bus_hdrlen, struct device *dev) INIT_LIST_HEAD(&drvr->bus_if->dcmd_list); - init_waitqueue_head(&drvr->pend_8021x_wait); - return ret; fail: @@ -879,19 +881,18 @@ void brcmf_detach(struct device *dev) kfree(drvr); } -static int brcmf_get_pend_8021x_cnt(struct brcmf_pub *drvr) +static int brcmf_get_pend_8021x_cnt(struct brcmf_if *ifp) { - return atomic_read(&drvr->pend_8021x_cnt); + return atomic_read(&ifp->pend_8021x_cnt); } int brcmf_netdev_wait_pend8021x(struct net_device *ndev) { struct brcmf_if *ifp = netdev_priv(ndev); - struct brcmf_pub *drvr = ifp->drvr; int err; - err = wait_event_timeout(drvr->pend_8021x_wait, - !brcmf_get_pend_8021x_cnt(drvr), + err = wait_event_timeout(ifp->pend_8021x_wait, + !brcmf_get_pend_8021x_cnt(ifp), msecs_to_jiffies(MAX_WAIT_FOR_8021X_TX)); WARN_ON(!err); From 659c84ff3f1b979a91b726a65ab7f8091e019f2b Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Wed, 6 Feb 2013 18:40:40 +0100 Subject: [PATCH 065/209] brcmfmac: Add logging for FIL int set/get cmds. Reviewed-by: Arend Van Spriel Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/fwil.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fwil.c b/drivers/net/wireless/brcm80211/brcmfmac/fwil.c index d8d8b6549dc5..f6ffcf63cccb 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/fwil.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/fwil.c @@ -100,6 +100,7 @@ brcmf_fil_cmd_int_set(struct brcmf_if *ifp, u32 cmd, u32 data) __le32 data_le = cpu_to_le32(data); mutex_lock(&ifp->drvr->proto_block); + brcmf_dbg(FIL, "cmd=%d, value=%d\n", cmd, data); err = brcmf_fil_cmd_data(ifp, cmd, &data_le, sizeof(data_le), true); mutex_unlock(&ifp->drvr->proto_block); @@ -116,6 +117,7 @@ brcmf_fil_cmd_int_get(struct brcmf_if *ifp, u32 cmd, u32 *data) err = brcmf_fil_cmd_data(ifp, cmd, &data_le, sizeof(data_le), false); mutex_unlock(&ifp->drvr->proto_block); *data = le32_to_cpu(data_le); + brcmf_dbg(FIL, "cmd=%d, value=%d\n", cmd, *data); return err; } From b1a2a41126fc582a3d5613aa2d3e632b2eb1a2c4 Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Wed, 6 Feb 2013 18:40:41 +0100 Subject: [PATCH 066/209] brcmfmac: Track statistics per ifp. Statistics were tracked by bus driver while it is to be tracked per ifp/netdev. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- .../net/wireless/brcm80211/brcmfmac/dhd_bus.h | 13 ---- .../wireless/brcm80211/brcmfmac/dhd_linux.c | 61 ++++++++----------- .../wireless/brcm80211/brcmfmac/dhd_sdio.c | 10 --- drivers/net/wireless/brcm80211/brcmfmac/usb.c | 9 +-- 4 files changed, 27 insertions(+), 66 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h index 57826dcbe9b9..6af7c9dce0f7 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h @@ -24,18 +24,6 @@ enum brcmf_bus_state { BRCMF_BUS_DATA /* Ready for frame transfers */ }; -struct dngl_stats { - unsigned long rx_packets; /* total packets received */ - unsigned long tx_packets; /* total packets transmitted */ - unsigned long rx_bytes; /* total bytes received */ - unsigned long tx_bytes; /* total bytes transmitted */ - unsigned long rx_errors; /* bad packets received */ - unsigned long tx_errors; /* packet transmit problems */ - unsigned long rx_dropped; /* packets dropped by dongle */ - unsigned long tx_dropped; /* packets dropped by dongle */ - unsigned long multicast; /* multicast packets received */ -}; - struct brcmf_bus_dcmd { char *name; char *param; @@ -87,7 +75,6 @@ struct brcmf_bus { enum brcmf_bus_state state; uint maxctl; unsigned long tx_realloc; - struct dngl_stats dstats; u8 align; struct list_head dcmd_list; diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c index 9a4494a5b711..05cae3736e50 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c @@ -226,10 +226,12 @@ static netdev_tx_t brcmf_netdev_start_xmit(struct sk_buff *skb, ret = brcmf_bus_txdata(drvr->bus_if, skb); done: - if (ret) - drvr->bus_if->dstats.tx_dropped++; - else - drvr->bus_if->dstats.tx_packets++; + if (ret) { + ifp->stats.tx_dropped++; + } else { + ifp->stats.tx_packets++; + ifp->stats.tx_bytes += skb->len; + } /* Return ok: we always eat the packet */ return NETDEV_TX_OK; @@ -270,12 +272,13 @@ void brcmf_rx_frames(struct device *dev, struct sk_buff_head *skb_list) skb_queue_walk_safe(skb_list, skb, pnext) { skb_unlink(skb, skb_list); - /* process and remove protocol-specific header - */ + /* process and remove protocol-specific header */ ret = brcmf_proto_hdrpull(drvr, &ifidx, skb); - if (ret < 0) { - if (ret != -ENODATA) - bus_if->dstats.rx_errors++; + ifp = drvr->iflist[ifidx]; + + if (ret || !ifp || !ifp->ndev) { + if ((ret != -ENODATA) && ifp) + ifp->stats.rx_errors++; brcmu_pkt_buf_free_skb(skb); continue; } @@ -295,21 +298,11 @@ void brcmf_rx_frames(struct device *dev, struct sk_buff_head *skb_list) eth = skb->data; len = skb->len; - ifp = drvr->iflist[ifidx]; - if (ifp == NULL) - ifp = drvr->iflist[0]; - - if (!ifp || !ifp->ndev || - ifp->ndev->reg_state != NETREG_REGISTERED) { - brcmu_pkt_buf_free_skb(skb); - continue; - } - skb->dev = ifp->ndev; skb->protocol = eth_type_trans(skb, skb->dev); if (skb->pkt_type == PACKET_MULTICAST) - bus_if->dstats.multicast++; + ifp->stats.multicast++; skb->data = eth; skb->len = len; @@ -325,8 +318,13 @@ void brcmf_rx_frames(struct device *dev, struct sk_buff_head *skb_list) ifp->ndev->last_rx = jiffies; } - bus_if->dstats.rx_bytes += skb->len; - bus_if->dstats.rx_packets++; /* Local count */ + if (!(ifp->ndev->flags & IFF_UP)) { + brcmu_pkt_buf_free_skb(skb); + continue; + } + + ifp->stats.rx_bytes += skb->len; + ifp->stats.rx_packets++; if (in_interrupt()) netif_rx(skb); @@ -352,35 +350,28 @@ void brcmf_txcomplete(struct device *dev, struct sk_buff *txp, bool success) brcmf_proto_hdrpull(drvr, &ifidx, txp); + ifp = drvr->iflist[ifidx]; + if (!ifp) + return; + eh = (struct ethhdr *)(txp->data); type = ntohs(eh->h_proto); if (type == ETH_P_PAE) { - ifp = drvr->iflist[ifidx]; atomic_dec(&ifp->pend_8021x_cnt); if (waitqueue_active(&ifp->pend_8021x_wait)) wake_up(&ifp->pend_8021x_wait); } + if (!success) + ifp->stats.tx_errors++; } static struct net_device_stats *brcmf_netdev_get_stats(struct net_device *ndev) { struct brcmf_if *ifp = netdev_priv(ndev); - struct brcmf_bus *bus_if = ifp->drvr->bus_if; brcmf_dbg(TRACE, "Enter\n"); - /* Copy dongle stats to net device stats */ - ifp->stats.rx_packets = bus_if->dstats.rx_packets; - ifp->stats.tx_packets = bus_if->dstats.tx_packets; - ifp->stats.rx_bytes = bus_if->dstats.rx_bytes; - ifp->stats.tx_bytes = bus_if->dstats.tx_bytes; - ifp->stats.rx_errors = bus_if->dstats.rx_errors; - ifp->stats.tx_errors = bus_if->dstats.tx_errors; - ifp->stats.rx_dropped = bus_if->dstats.rx_dropped; - ifp->stats.tx_dropped = bus_if->dstats.tx_dropped; - ifp->stats.multicast = bus_if->dstats.multicast; - return &ifp->stats; } diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c index df8a18571951..d424dd63077b 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c @@ -1096,7 +1096,6 @@ static int brcmf_sdio_hdparser(struct brcmf_sdio *bus, u8 *header, if (len > MAX_RX_DATASZ && rd->channel != SDPCM_CONTROL_CHANNEL && type != BRCMF_SDIO_FT_SUPER) { brcmf_err("HW header length too long\n"); - bus->sdiodev->bus_if->dstats.rx_errors++; bus->sdcnt.rx_toolong++; brcmf_sdbrcm_rxfail(bus, false, false); rd->len = 0; @@ -1298,7 +1297,6 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq) if (errcode < 0) { brcmf_err("glom read of %d bytes failed: %d\n", dlen, errcode); - bus->sdiodev->bus_if->dstats.rx_errors++; sdio_claim_host(bus->sdiodev->func[1]); if (bus->glomerr++ < 3) { @@ -1478,7 +1476,6 @@ brcmf_sdbrcm_read_control(struct brcmf_sdio *bus, u8 *hdr, uint len, uint doff) if ((rdlen + BRCMF_FIRSTREAD) > bus->sdiodev->bus_if->maxctl) { brcmf_err("%d-byte control read exceeds %d-byte buffer\n", rdlen, bus->sdiodev->bus_if->maxctl); - bus->sdiodev->bus_if->dstats.rx_errors++; brcmf_sdbrcm_rxfail(bus, false, false); goto done; } @@ -1486,7 +1483,6 @@ brcmf_sdbrcm_read_control(struct brcmf_sdio *bus, u8 *hdr, uint len, uint doff) if ((len - doff) > bus->sdiodev->bus_if->maxctl) { brcmf_err("%d-byte ctl frame (%d-byte ctl data) exceeds %d-byte limit\n", len, len - doff, bus->sdiodev->bus_if->maxctl); - bus->sdiodev->bus_if->dstats.rx_errors++; bus->sdcnt.rx_toolong++; brcmf_sdbrcm_rxfail(bus, false, false); goto done; @@ -1634,7 +1630,6 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes) if (!pkt) { /* Give up on data, request rtx of events */ brcmf_err("brcmu_pkt_buf_get_skb failed\n"); - bus->sdiodev->bus_if->dstats.rx_dropped++; brcmf_sdbrcm_rxfail(bus, false, RETRYCHAN(rd->channel)); sdio_release_host(bus->sdiodev->func[1]); @@ -1652,7 +1647,6 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes) brcmf_err("read %d bytes from channel %d failed: %d\n", rd->len, rd->channel, sdret); brcmu_pkt_buf_free_skb(pkt); - bus->sdiodev->bus_if->dstats.rx_errors++; sdio_claim_host(bus->sdiodev->func[1]); brcmf_sdbrcm_rxfail(bus, true, RETRYCHAN(rd->channel)); @@ -1940,10 +1934,6 @@ static uint brcmf_sdbrcm_sendfromq(struct brcmf_sdio *bus, uint maxframes) datalen = pkt->len - SDPCM_HDRLEN; ret = brcmf_sdbrcm_txpkt(bus, pkt, SDPCM_DATA_CHANNEL, true); - if (ret) - bus->sdiodev->bus_if->dstats.tx_errors++; - else - bus->sdiodev->bus_if->dstats.tx_bytes += datalen; /* In poll mode, need to check for other events */ if (!bus->intr && cnt) { diff --git a/drivers/net/wireless/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/brcm80211/brcmfmac/usb.c index e15630cc3889..06f7339b50b4 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/usb.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/usb.c @@ -421,10 +421,6 @@ static void brcmf_usb_tx_complete(struct urb *urb) brcmf_dbg(USB, "Enter, urb->status=%d, skb=%p\n", urb->status, req->skb); brcmf_usb_del_fromq(devinfo, req); - if (urb->status == 0) - devinfo->bus_pub.bus->dstats.tx_packets++; - else - devinfo->bus_pub.bus->dstats.tx_errors++; brcmf_txcomplete(devinfo->dev, req->skb, urb->status == 0); @@ -451,10 +447,7 @@ static void brcmf_usb_rx_complete(struct urb *urb) req->skb = NULL; /* zero lenght packets indicate usb "failure". Do not refill */ - if (urb->status == 0 && urb->actual_length) { - devinfo->bus_pub.bus->dstats.rx_packets++; - } else { - devinfo->bus_pub.bus->dstats.rx_errors++; + if (urb->status != 0 || !urb->actual_length) { brcmu_pkt_buf_free_skb(skb); brcmf_usb_enq(devinfo, &devinfo->rx_freeq, req, NULL); return; From 94889b1fb51ff6c81be2926890f29d0cfe150e75 Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Wed, 6 Feb 2013 18:40:42 +0100 Subject: [PATCH 067/209] brcmfmac: Update tracelogging for multiple netdevs. When supporting multiple netdevs it is usefull to log idx in netdev related functions. This will be used for features like P2P. Reviewed-by: Arend Van Spriel Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- .../wireless/brcm80211/brcmfmac/dhd_linux.c | 34 +++++++++++-------- 1 file changed, 19 insertions(+), 15 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c index 05cae3736e50..a09c0775d1c8 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c @@ -70,9 +70,10 @@ static void _brcmf_set_multicast_list(struct work_struct *work) u32 buflen; s32 err; - brcmf_dbg(TRACE, "enter\n"); - ifp = container_of(work, struct brcmf_if, multicast_work); + + brcmf_dbg(TRACE, "Enter, idx=%d\n", ifp->idx); + ndev = ifp->ndev; /* Determine initial value of allmulti flag */ @@ -129,9 +130,10 @@ _brcmf_set_mac_address(struct work_struct *work) struct brcmf_if *ifp; s32 err; - brcmf_dbg(TRACE, "enter\n"); - ifp = container_of(work, struct brcmf_if, setmacaddr_work); + + brcmf_dbg(TRACE, "Enter, idx=%d\n", ifp->idx); + err = brcmf_fil_iovar_data_set(ifp, "cur_etheraddr", ifp->mac_addr, ETH_ALEN); if (err < 0) { @@ -168,7 +170,7 @@ static netdev_tx_t brcmf_netdev_start_xmit(struct sk_buff *skb, struct brcmf_pub *drvr = ifp->drvr; struct ethhdr *eh; - brcmf_dbg(TRACE, "Enter\n"); + brcmf_dbg(TRACE, "Enter, idx=%d\n", ifp->idx); /* Can the device send data? */ if (drvr->bus_if->state != BRCMF_BUS_DATA) { @@ -370,7 +372,7 @@ static struct net_device_stats *brcmf_netdev_get_stats(struct net_device *ndev) { struct brcmf_if *ifp = netdev_priv(ndev); - brcmf_dbg(TRACE, "Enter\n"); + brcmf_dbg(TRACE, "Enter, idx=%d\n", ifp->idx); return &ifp->stats; } @@ -422,7 +424,7 @@ static int brcmf_ethtool(struct brcmf_if *ifp, void __user *uaddr) u32 toe_cmpnt, csum_dir; int ret; - brcmf_dbg(TRACE, "Enter\n"); + brcmf_dbg(TRACE, "Enter, idx=%d\n", ifp->idx); /* all ethtool calls start with a cmd word */ if (copy_from_user(&cmd, uaddr, sizeof(u32))) @@ -519,7 +521,7 @@ static int brcmf_netdev_ioctl_entry(struct net_device *ndev, struct ifreq *ifr, struct brcmf_if *ifp = netdev_priv(ndev); struct brcmf_pub *drvr = ifp->drvr; - brcmf_dbg(TRACE, "ifidx %d, cmd 0x%04x\n", ifp->idx, cmd); + brcmf_dbg(TRACE, "Enter, bssidx=%d, cmd=0x%04x\n", ifp->idx, cmd); if (!drvr->iflist[ifp->idx]) return -1; @@ -532,7 +534,9 @@ static int brcmf_netdev_ioctl_entry(struct net_device *ndev, struct ifreq *ifr, static int brcmf_netdev_stop(struct net_device *ndev) { - brcmf_dbg(TRACE, "Enter\n"); + struct brcmf_if *ifp = netdev_priv(ndev); + + brcmf_dbg(TRACE, "Enter, idx=%d\n", ifp->idx); brcmf_cfg80211_down(ndev); @@ -550,7 +554,7 @@ static int brcmf_netdev_open(struct net_device *ndev) u32 toe_ol; s32 ret = 0; - brcmf_dbg(TRACE, "ifidx %d\n", ifp->idx); + brcmf_dbg(TRACE, "Enter, idx=%d\n", ifp->idx); /* If bus is not ready, can't continue */ if (bus_if->state != BRCMF_BUS_DATA) { @@ -602,7 +606,8 @@ int brcmf_net_attach(struct brcmf_if *ifp) struct brcmf_pub *drvr = ifp->drvr; struct net_device *ndev; - brcmf_dbg(TRACE, "ifidx %d mac %pM\n", ifp->idx, ifp->mac_addr); + brcmf_dbg(TRACE, "Enter, idx=%d mac=%pM\n", ifp->idx, + ifp->mac_addr); ndev = ifp->ndev; /* set appropriate operations */ @@ -641,7 +646,7 @@ struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, int ifidx, s32 bssidx, struct net_device *ndev; int i; - brcmf_dbg(TRACE, "idx %d\n", ifidx); + brcmf_dbg(TRACE, "Enter, bssidx=%d, ifidx=%d\n", bssidx, ifidx); ifp = drvr->iflist[ifidx]; /* @@ -695,13 +700,12 @@ void brcmf_del_if(struct brcmf_pub *drvr, int ifidx) { struct brcmf_if *ifp; - brcmf_dbg(TRACE, "idx %d\n", ifidx); - ifp = drvr->iflist[ifidx]; if (!ifp) { - brcmf_err("Null interface\n"); + brcmf_err("Null interface, idx=%d\n", ifidx); return; } + brcmf_dbg(TRACE, "Enter, idx=%d, bssidx=%d\n", ifidx, ifp->bssidx); if (ifp->ndev) { if (ifidx == 0) { if (ifp->ndev->netdev_ops == &brcmf_netdev_ops_pri) { From 7ee296027871c15aee7e1e48c372f854a837cd36 Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Wed, 6 Feb 2013 18:40:43 +0100 Subject: [PATCH 068/209] brcmfmac: Cleanup function brcmf_notifiy_connect_status_ap. Clean up function, removing some unnecessary code and initialisation. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Piotr Haber Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- .../wireless/brcm80211/brcmfmac/wl_cfg80211.c | 20 +++++++------------ 1 file changed, 7 insertions(+), 13 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 0f170cb83c54..544257a52779 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -3994,38 +3994,32 @@ brcmf_notify_connect_status_ap(struct brcmf_cfg80211_info *cfg, struct net_device *ndev, const struct brcmf_event_msg *e, void *data) { - s32 err = 0; + static int generation; u32 event = e->event_code; u32 reason = e->reason; - u32 len = e->datalen; - static int generation; - struct station_info sinfo; brcmf_dbg(CONN, "event %d, reason %d\n", event, reason); - memset(&sinfo, 0, sizeof(sinfo)); - sinfo.filled = 0; if (((event == BRCMF_E_ASSOC_IND) || (event == BRCMF_E_REASSOC_IND)) && - reason == BRCMF_E_STATUS_SUCCESS) { + (reason == BRCMF_E_STATUS_SUCCESS)) { + memset(&sinfo, 0, sizeof(sinfo)); sinfo.filled = STATION_INFO_ASSOC_REQ_IES; if (!data) { brcmf_err("No IEs present in ASSOC/REASSOC_IND"); return -EINVAL; } sinfo.assoc_req_ies = data; - sinfo.assoc_req_ies_len = len; + sinfo.assoc_req_ies_len = e->datalen; generation++; sinfo.generation = generation; - cfg80211_new_sta(ndev, e->addr, &sinfo, GFP_ATOMIC); + cfg80211_new_sta(ndev, e->addr, &sinfo, GFP_KERNEL); } else if ((event == BRCMF_E_DISASSOC_IND) || (event == BRCMF_E_DEAUTH_IND) || (event == BRCMF_E_DEAUTH)) { - generation++; - sinfo.generation = generation; - cfg80211_del_sta(ndev, e->addr, GFP_ATOMIC); + cfg80211_del_sta(ndev, e->addr, GFP_KERNEL); } - return err; + return 0; } static s32 From 1701261d070e2077867fd08efe7b5977e3a130f9 Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Wed, 6 Feb 2013 18:40:44 +0100 Subject: [PATCH 069/209] brcmfmac: Use single function for channel to chanspec. Simplify code by using single function for converting channel to chanspec. No need to set 40MHz flags, as they are not needed for correct working in FW. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Piotr Haber Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- .../wireless/brcm80211/brcmfmac/wl_cfg80211.c | 63 +++++++------------ 1 file changed, 21 insertions(+), 42 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 544257a52779..153924ecc890 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -393,16 +393,9 @@ static u16 channel_to_chanspec(struct ieee80211_channel *ch) else chanspec |= WL_CHANSPEC_BAND_5G; - if (ch->flags & IEEE80211_CHAN_NO_HT40) { - chanspec |= WL_CHANSPEC_BW_20; - chanspec |= WL_CHANSPEC_CTL_SB_NONE; - } else { - chanspec |= WL_CHANSPEC_BW_40; - if (ch->flags & IEEE80211_CHAN_NO_HT40PLUS) - chanspec |= WL_CHANSPEC_CTL_SB_LOWER; - else - chanspec |= WL_CHANSPEC_CTL_SB_UPPER; - } + chanspec |= WL_CHANSPEC_BW_20; + chanspec |= WL_CHANSPEC_CTL_SB_NONE; + return chanspec; } @@ -933,31 +926,6 @@ static void brcmf_init_prof(struct brcmf_cfg80211_profile *prof) memset(prof, 0, sizeof(*prof)); } -static void brcmf_ch_to_chanspec(int ch, struct brcmf_join_params *join_params, - size_t *join_params_size) -{ - u16 chanspec = 0; - - if (ch != 0) { - if (ch <= CH_MAX_2G_CHANNEL) - chanspec |= WL_CHANSPEC_BAND_2G; - else - chanspec |= WL_CHANSPEC_BAND_5G; - - chanspec |= WL_CHANSPEC_BW_20; - chanspec |= WL_CHANSPEC_CTL_SB_NONE; - - *join_params_size += BRCMF_ASSOC_PARAMS_FIXED_SIZE + - sizeof(u16); - - chanspec |= (ch & WL_CHANSPEC_CHAN_MASK); - join_params->params_le.chanspec_list[0] = cpu_to_le16(chanspec); - join_params->params_le.chanspec_num = cpu_to_le32(1); - - brcmf_dbg(CONN, "channel %d, chanspec %#X\n", ch, chanspec); - } -} - static void brcmf_link_down(struct brcmf_cfg80211_vif *vif) { s32 err = 0; @@ -988,6 +956,7 @@ brcmf_cfg80211_join_ibss(struct wiphy *wiphy, struct net_device *ndev, s32 err = 0; s32 wsec = 0; s32 bcnprd; + u16 chanspec; brcmf_dbg(TRACE, "Enter\n"); if (!check_vif_up(ifp->vif)) @@ -1091,8 +1060,11 @@ brcmf_cfg80211_join_ibss(struct wiphy *wiphy, struct net_device *ndev, params->chandef.chan->center_freq); if (params->channel_fixed) { /* adding chanspec */ - brcmf_ch_to_chanspec(cfg->channel, - &join_params, &join_params_size); + chanspec = channel_to_chanspec(params->chandef.chan); + join_params.params_le.chanspec_list[0] = + cpu_to_le16(chanspec); + join_params.params_le.chanspec_num = cpu_to_le32(1); + join_params_size += sizeof(join_params.params_le); } /* set channel for starter */ @@ -1404,6 +1376,7 @@ brcmf_cfg80211_connect(struct wiphy *wiphy, struct net_device *ndev, struct brcmf_join_params join_params; size_t join_params_size; struct brcmf_ssid ssid; + u16 chanspec; s32 err = 0; @@ -1421,10 +1394,13 @@ brcmf_cfg80211_connect(struct wiphy *wiphy, struct net_device *ndev, if (chan) { cfg->channel = ieee80211_frequency_to_channel(chan->center_freq); - brcmf_dbg(CONN, "channel (%d), center_req (%d)\n", - cfg->channel, chan->center_freq); - } else + chanspec = channel_to_chanspec(chan); + brcmf_dbg(CONN, "channel=%d, center_req=%d, chanspec=0x%04x\n", + cfg->channel, chan->center_freq, chanspec); + } else { cfg->channel = 0; + chanspec = 0; + } brcmf_dbg(INFO, "ie (%p), ie_len (%zd)\n", sme->ie, sme->ie_len); @@ -1473,8 +1449,11 @@ brcmf_cfg80211_connect(struct wiphy *wiphy, struct net_device *ndev, brcmf_dbg(CONN, "ssid \"%s\", len (%d)\n", ssid.SSID, ssid.SSID_len); - brcmf_ch_to_chanspec(cfg->channel, - &join_params, &join_params_size); + if (cfg->channel) { + join_params.params_le.chanspec_list[0] = cpu_to_le16(chanspec); + join_params.params_le.chanspec_num = cpu_to_le32(1); + join_params_size += sizeof(join_params.params_le); + } err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SET_SSID, &join_params, join_params_size); if (err) From 75d907d3ee835f8759fe291023aa609dccebe504 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Wed, 6 Feb 2013 18:40:45 +0100 Subject: [PATCH 070/209] brcmfmac: add chip information to the bus interface Extend the bus interface with chip identifier and revision. This will be used when certain devices need special handling in the driver. Reviewed-by: Hante Meuleman Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Piotr Haber Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h | 4 ++++ drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 2 ++ drivers/net/wireless/brcm80211/brcmfmac/usb.c | 2 ++ 3 files changed, 8 insertions(+) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h index 6af7c9dce0f7..ad25c3408b59 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h @@ -64,6 +64,8 @@ struct brcmf_bus_ops { * @dstats: dongle-based statistical data. * @align: alignment requirement for the bus. * @dcmd_list: bus/device specific dongle initialization commands. + * @chip: device identifier of the dongle chip. + * @chiprev: revision of the dongle chip. */ struct brcmf_bus { union { @@ -76,6 +78,8 @@ struct brcmf_bus { uint maxctl; unsigned long tx_realloc; u8 align; + u32 chip; + u32 chiprev; struct list_head dcmd_list; struct brcmf_bus_ops *ops; diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c index d424dd63077b..04680c56bafc 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c @@ -3927,6 +3927,8 @@ void *brcmf_sdbrcm_probe(u32 regsva, struct brcmf_sdio_dev *sdiodev) /* Assign bus interface call back */ bus->sdiodev->bus_if->dev = bus->sdiodev->dev; bus->sdiodev->bus_if->ops = &brcmf_sdio_bus_ops; + bus->sdiodev->bus_if->chip = bus->ci->chip; + bus->sdiodev->bus_if->chiprev = bus->ci->chiprev; /* Attach to the brcmf/OS/network interface */ ret = brcmf_attach(SDPCM_RESERVE, bus->sdiodev->dev); diff --git a/drivers/net/wireless/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/brcm80211/brcmfmac/usb.c index 06f7339b50b4..a55994d33763 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/usb.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/usb.c @@ -1250,6 +1250,8 @@ static int brcmf_usb_probe_cb(struct brcmf_usbdev_info *devinfo) bus->bus_priv.usb = bus_pub; dev_set_drvdata(dev, bus); bus->ops = &brcmf_usb_bus_ops; + bus->chip = bus_pub->devid; + bus->chiprev = bus_pub->chiprev; /* Attach to the common driver interface */ ret = brcmf_attach(0, dev); From 371830eafeb742e973964b38a55f17b69ea714d0 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Wed, 6 Feb 2013 18:40:46 +0100 Subject: [PATCH 071/209] brcmfmac: add function to retrieve chip information Added function to obtain chip information for chip specific code. Reviewed-by: Hante Meuleman Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Piotr Haber Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/dhd.h | 1 + drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c | 10 ++++++++++ 2 files changed, 11 insertions(+) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h index f0e81a880fb6..e17f68aaba9e 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h @@ -552,5 +552,6 @@ extern int brcmf_net_attach(struct brcmf_if *ifp); extern struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, int ifidx, s32 bssidx, char *name, u8 *mac_addr); extern void brcmf_del_if(struct brcmf_pub *drvr, int ifidx); +extern u32 brcmf_get_chip_info(struct brcmf_if *ifp); #endif /* _BRCMF_H_ */ diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c index a09c0775d1c8..6202ad20c28d 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c @@ -895,6 +895,16 @@ int brcmf_netdev_wait_pend8021x(struct net_device *ndev) return !err; } +/* + * return chip id and rev of the device encoded in u32. + */ +u32 brcmf_get_chip_info(struct brcmf_if *ifp) +{ + struct brcmf_bus *bus = ifp->drvr->bus_if; + + return bus->chip << 4 | bus->chiprev; +} + static void brcmf_driver_init(struct work_struct *work) { brcmf_debugfs_init(); From cbb1ec9491fdbd3aa9dee6ad9a3bcb05bdfd279d Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Wed, 6 Feb 2013 18:40:47 +0100 Subject: [PATCH 072/209] brcmfmac: fix problem connecting to AP without security The bcm43236 device showed having an issue connection to an AP without security when auth_type was set to automatic. For this particular device a workaround is made by selecting open-system. This problem does not occur when using wpa_supplicant as it will not use auth type automatic. Reviewed-by: Hante Meuleman Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Piotr Haber Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- .../wireless/brcm80211/brcmfmac/wl_cfg80211.c | 22 ++++++++++++++++++- 1 file changed, 21 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 153924ecc890..d47b274018ba 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -1365,9 +1365,28 @@ brcmf_set_sharedkey(struct net_device *ndev, return err; } +static +enum nl80211_auth_type brcmf_war_auth_type(struct brcmf_if *ifp, + enum nl80211_auth_type type) +{ + u32 ci; + if (type == NL80211_AUTHTYPE_AUTOMATIC) { + /* shift to ignore chip revision */ + ci = brcmf_get_chip_info(ifp) >> 4; + switch (ci) { + case 43236: + brcmf_dbg(CONN, "43236 WAR: use OPEN instead of AUTO\n"); + return NL80211_AUTHTYPE_OPEN_SYSTEM; + default: + break; + } + } + return type; +} + static s32 brcmf_cfg80211_connect(struct wiphy *wiphy, struct net_device *ndev, - struct cfg80211_connect_params *sme) + struct cfg80211_connect_params *sme) { struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); struct brcmf_if *ifp = netdev_priv(ndev); @@ -1410,6 +1429,7 @@ brcmf_cfg80211_connect(struct wiphy *wiphy, struct net_device *ndev, goto done; } + sme->auth_type = brcmf_war_auth_type(ifp, sme->auth_type); err = brcmf_set_auth_type(ndev, sme); if (err) { brcmf_err("wl_set_auth_type failed (%d)\n", err); From 957f4aca5fa0db69635271bc4621cc0b65b2d590 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Wed, 6 Feb 2013 12:54:17 -0600 Subject: [PATCH 073/209] rtlwifi: rtl8192cu: Fix NULL dereference BUG when using new_id When the new_id entry in /sysfs is used for a foreign USB device, rtlwifi BUGS with a NULL pointer dereference because the per-driver configuration data is not available. The probe function has been restructured as suggested by Ben Hutchings . Signed-off-by: Larry Finger Cc: Stable Signed-off-by: John W. Linville --- drivers/net/wireless/rtlwifi/rtl8192cu/sw.c | 8 +++++++- drivers/net/wireless/rtlwifi/usb.c | 5 +++-- drivers/net/wireless/rtlwifi/usb.h | 3 ++- 3 files changed, 12 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c index d9e659f92767..577c0dca21ed 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c @@ -363,9 +363,15 @@ static struct usb_device_id rtl8192c_usb_ids[] = { MODULE_DEVICE_TABLE(usb, rtl8192c_usb_ids); +static int rtl8192cu_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + return rtl_usb_probe(intf, id, &rtl92cu_hal_cfg); +} + static struct usb_driver rtl8192cu_driver = { .name = "rtl8192cu", - .probe = rtl_usb_probe, + .probe = rtl8192cu_probe, .disconnect = rtl_usb_disconnect, .id_table = rtl8192c_usb_ids, diff --git a/drivers/net/wireless/rtlwifi/usb.c b/drivers/net/wireless/rtlwifi/usb.c index af5423cc5b0f..80730c72e0d6 100644 --- a/drivers/net/wireless/rtlwifi/usb.c +++ b/drivers/net/wireless/rtlwifi/usb.c @@ -937,7 +937,8 @@ static struct rtl_intf_ops rtl_usb_ops = { }; int rtl_usb_probe(struct usb_interface *intf, - const struct usb_device_id *id) + const struct usb_device_id *id, + struct rtl_hal_cfg *rtl_hal_cfg) { int err; struct ieee80211_hw *hw = NULL; @@ -972,7 +973,7 @@ int rtl_usb_probe(struct usb_interface *intf, usb_set_intfdata(intf, hw); /* init cfg & intf_ops */ rtlpriv->rtlhal.interface = INTF_USB; - rtlpriv->cfg = (struct rtl_hal_cfg *)(id->driver_info); + rtlpriv->cfg = rtl_hal_cfg; rtlpriv->intf_ops = &rtl_usb_ops; rtl_dbgp_flag_init(hw); /* Init IO handler */ diff --git a/drivers/net/wireless/rtlwifi/usb.h b/drivers/net/wireless/rtlwifi/usb.h index 5235136f6dd2..fb986f98d1df 100644 --- a/drivers/net/wireless/rtlwifi/usb.h +++ b/drivers/net/wireless/rtlwifi/usb.h @@ -157,7 +157,8 @@ struct rtl_usb_priv { int rtl_usb_probe(struct usb_interface *intf, - const struct usb_device_id *id); + const struct usb_device_id *id, + struct rtl_hal_cfg *rtl92cu_hal_cfg); void rtl_usb_disconnect(struct usb_interface *intf); int rtl_usb_suspend(struct usb_interface *pusb_intf, pm_message_t message); int rtl_usb_resume(struct usb_interface *pusb_intf); From c5e534e569fd07991d4d09921c73823cd5e4115e Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Thu, 7 Feb 2013 14:44:40 +0100 Subject: [PATCH 074/209] NET: ath5k, check ath5k_eeprom_mode_from_channel retval It can, if invalid argument given, return a negative value. In that case we would access arrays out-of-bounds and such. Check the value and yell loudly if that happened as it would be a bug in the implementation. (Instead of silently corrupting memory.) Signed-off-by: Jiri Slaby Cc: Nick Kossifidis Cc: "Luis R. Rodriguez" Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/phy.c | 4 ++++ drivers/net/wireless/ath/ath5k/reset.c | 2 ++ 2 files changed, 6 insertions(+) diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c index ab363f34b4df..a78afa98c650 100644 --- a/drivers/net/wireless/ath/ath5k/phy.c +++ b/drivers/net/wireless/ath/ath5k/phy.c @@ -1613,6 +1613,10 @@ ath5k_hw_update_noise_floor(struct ath5k_hw *ah) ah->ah_cal_mask |= AR5K_CALIBRATION_NF; ee_mode = ath5k_eeprom_mode_from_channel(ah->ah_current_channel); + if (WARN_ON(ee_mode < 0)) { + ah->ah_cal_mask &= ~AR5K_CALIBRATION_NF; + return; + } /* completed NF calibration, test threshold */ nf = ath5k_hw_read_measured_noise_floor(ah); diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c index 4084b1076286..e2d8b2cf19eb 100644 --- a/drivers/net/wireless/ath/ath5k/reset.c +++ b/drivers/net/wireless/ath/ath5k/reset.c @@ -985,6 +985,8 @@ ath5k_hw_commit_eeprom_settings(struct ath5k_hw *ah, return; ee_mode = ath5k_eeprom_mode_from_channel(channel); + if (WARN_ON(ee_mode < 0)) + return; /* Adjust power delta for channel 14 */ if (channel->center_freq == 2484) From 708eb54f20334470ad92042547db0fef0cd60462 Mon Sep 17 00:00:00 2001 From: Tim Gardner Date: Thu, 7 Feb 2013 12:35:35 -0700 Subject: [PATCH 075/209] brcmsmac: fix u16 overflow warning DOT11_MIN_BEACON_PERIOD and DOT11_MAX_BEACON_PERIOD are superfluous. The only invalid beacon period is 0. Comparing a 16 bit quantity to 0xffff also causes a compile warning: drivers/net/wireless/brcm80211/brcmsmac/main.c:5560 brcms_c_set_beacon_period() warn: impossible condition '(period > 65535) => (0-65535 > 65535)' Observed from smatch analysis. Cc: Brett Rudley Cc: Arend van Spriel Cc: "Franky (Zhenhui) Lin" Cc: Hante Meuleman Cc: "John W. Linville" Cc: Pieter-Paul Giesberts Cc: Seth Forshee Cc: Hauke Mehrtens Cc: linux-wireless@vger.kernel.org Cc: brcm80211-dev-list@broadcom.com Cc: netdev@vger.kernel.org Signed-off-by: Tim Gardner Acked-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmsmac/main.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmsmac/main.c b/drivers/net/wireless/brcm80211/brcmsmac/main.c index c26992a60e6c..080b54da6506 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/main.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c @@ -101,8 +101,6 @@ #define DOT11_RTS_LEN 16 #define DOT11_CTS_LEN 10 #define DOT11_BA_BITMAP_LEN 128 -#define DOT11_MIN_BEACON_PERIOD 1 -#define DOT11_MAX_BEACON_PERIOD 0xFFFF #define DOT11_MAXNUMFRAGS 16 #define DOT11_MAX_FRAG_LEN 2346 @@ -5555,8 +5553,7 @@ int brcms_c_set_rateset(struct brcms_c_info *wlc, struct brcm_rateset *rs) int brcms_c_set_beacon_period(struct brcms_c_info *wlc, u16 period) { - if (period < DOT11_MIN_BEACON_PERIOD || - period > DOT11_MAX_BEACON_PERIOD) + if (period == 0) return -EINVAL; wlc->default_bss->beacon_period = period; From 0d61c9177cb9bf48dcec9c3d9205a309085d4318 Mon Sep 17 00:00:00 2001 From: Tim Gardner Date: Thu, 7 Feb 2013 13:28:09 -0700 Subject: [PATCH 076/209] brcmsmac: avoid 512 byte stack variable Dynamically allocate the probe response template which avoids potential stack corruption. Observed with smatch: drivers/net/wireless/brcm80211/brcmsmac/main.c:7412 brcms_c_bss_update_probe_resp() warn: 'prb_resp' puts 512 bytes on stack Cc: Brett Rudley Cc: Arend van Spriel Cc: "Franky (Zhenhui) Lin" Cc: Hante Meuleman Cc: "John W. Linville" Cc: Seth Forshee Cc: Pieter-Paul Giesberts Cc: Hauke Mehrtens Cc: linux-wireless@vger.kernel.org Cc: brcm80211-dev-list@broadcom.com Cc: netdev@vger.kernel.org Signed-off-by: Tim Gardner Acked-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmsmac/main.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/brcm80211/brcmsmac/main.c b/drivers/net/wireless/brcm80211/brcmsmac/main.c index 080b54da6506..0985925cd3f4 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/main.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c @@ -7405,9 +7405,13 @@ brcms_c_bss_update_probe_resp(struct brcms_c_info *wlc, struct brcms_bss_cfg *cfg, bool suspend) { - u16 prb_resp[BCN_TMPL_LEN / 2]; + u16 *prb_resp; int len = BCN_TMPL_LEN; + prb_resp = kmalloc(BCN_TMPL_LEN, GFP_ATOMIC); + if (!prb_resp) + return; + /* * write the probe response to hardware, or save in * the config structure @@ -7441,6 +7445,8 @@ brcms_c_bss_update_probe_resp(struct brcms_c_info *wlc, if (suspend) brcms_c_enable_mac(wlc); + + kfree(prb_resp); } void brcms_c_update_probe_resp(struct brcms_c_info *wlc, bool suspend) From 4fe238b73240a10faf9689e4c37852492e16db52 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Thu, 7 Feb 2013 12:37:47 -0800 Subject: [PATCH 077/209] mwl8k: Remove unnecessary alloc/OOM messages alloc failures already get standardized OOM messages and a dump_stack. Signed-off-by: Joe Perches Signed-off-by: John W. Linville --- drivers/net/wireless/mwl8k.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index 51634f20539c..8186af4ed47b 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -1149,7 +1149,6 @@ static int mwl8k_rxq_init(struct ieee80211_hw *hw, int index) rxq->buf = kcalloc(MWL8K_RX_DESCS, sizeof(*rxq->buf), GFP_KERNEL); if (rxq->buf == NULL) { - wiphy_err(hw->wiphy, "failed to alloc RX skbuff list\n"); pci_free_consistent(priv->pdev, size, rxq->rxd, rxq->rxd_dma); return -ENOMEM; } @@ -1442,7 +1441,6 @@ static int mwl8k_txq_init(struct ieee80211_hw *hw, int index) txq->skb = kcalloc(MWL8K_TX_DESCS, sizeof(*txq->skb), GFP_KERNEL); if (txq->skb == NULL) { - wiphy_err(hw->wiphy, "failed to alloc TX skbuff list\n"); pci_free_consistent(priv->pdev, size, txq->txd, txq->txd_dma); return -ENOMEM; } From 2880b86859967af710c72f7d34fb421a86a71e22 Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Fri, 8 Feb 2013 12:06:31 +0100 Subject: [PATCH 078/209] brcmfmac: use brcmf_if::bssidx as index in interface list Upon receiving an IF event from the firmware the interface was created and stored on a list using the interface index. With upcoming P2P feature the firmware will send a IF event in which two interfaces have the same interface index. To uniquely locate them on the list the bss index is now used. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/dhd.h | 10 +-- .../net/wireless/brcm80211/brcmfmac/dhd_cdc.c | 8 +++ .../wireless/brcm80211/brcmfmac/dhd_linux.c | 72 +++++++++---------- .../net/wireless/brcm80211/brcmfmac/fweh.c | 9 ++- .../net/wireless/brcm80211/brcmfmac/fwil.c | 5 +- .../wireless/brcm80211/brcmfmac/wl_cfg80211.c | 2 + 6 files changed, 57 insertions(+), 49 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h index e17f68aaba9e..7c78131d0a25 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h @@ -512,7 +512,7 @@ struct brcmf_cfg80211_vif; * @vif: points to cfg80211 specific interface information. * @ndev: associated network device. * @stats: interface specific network statistics. - * @idx: interface index in device firmware. + * @ifidx: interface index in device firmware. * @bssidx: index of bss associated with this interface. * @mac_addr: assigned mac address. * @pend_8021x_cnt: tracks outstanding number of 802.1x frames. @@ -525,7 +525,7 @@ struct brcmf_if { struct net_device_stats stats; struct work_struct setmacaddr_work; struct work_struct multicast_work; - int idx; + int ifidx; s32 bssidx; u8 mac_addr[ETH_ALEN]; atomic_t pend_8021x_cnt; @@ -549,9 +549,9 @@ extern int brcmf_proto_hdrpull(struct brcmf_pub *drvr, u8 *ifidx, struct sk_buff *rxp); extern int brcmf_net_attach(struct brcmf_if *ifp); -extern struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, int ifidx, - s32 bssidx, char *name, u8 *mac_addr); -extern void brcmf_del_if(struct brcmf_pub *drvr, int ifidx); +extern struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, s32 bssidx, + s32 ifidx, char *name, u8 *mac_addr); +extern void brcmf_del_if(struct brcmf_pub *drvr, s32 bssidx); extern u32 brcmf_get_chip_info(struct brcmf_if *ifp); #endif /* _BRCMF_H_ */ diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c index bb454cdab29d..a2354d951dd7 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c @@ -303,6 +303,14 @@ int brcmf_proto_hdrpull(struct brcmf_pub *drvr, u8 *ifidx, brcmf_err("rx data ifnum out of range (%d)\n", *ifidx); return -EBADE; } + /* The ifidx is the idx to map to matching netdev/ifp. When receiving + * events this is easy because it contains the bssidx which maps + * 1-on-1 to the netdev/ifp. But for data frames the ifidx is rcvd. + * bssidx 1 is used for p2p0 and no data can be received or + * transmitted on it. Therefor bssidx is ifidx + 1 if ifidx > 0 + */ + if (*ifidx) + (*ifidx)++; if (((h->flags & BDC_FLAG_VER_MASK) >> BDC_FLAG_VER_SHIFT) != BDC_PROTO_VER) { diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c index 6202ad20c28d..db03d30f60b7 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c @@ -72,7 +72,7 @@ static void _brcmf_set_multicast_list(struct work_struct *work) ifp = container_of(work, struct brcmf_if, multicast_work); - brcmf_dbg(TRACE, "Enter, idx=%d\n", ifp->idx); + brcmf_dbg(TRACE, "Enter, idx=%d\n", ifp->bssidx); ndev = ifp->ndev; @@ -132,7 +132,7 @@ _brcmf_set_mac_address(struct work_struct *work) ifp = container_of(work, struct brcmf_if, setmacaddr_work); - brcmf_dbg(TRACE, "Enter, idx=%d\n", ifp->idx); + brcmf_dbg(TRACE, "Enter, idx=%d\n", ifp->bssidx); err = brcmf_fil_iovar_data_set(ifp, "cur_etheraddr", ifp->mac_addr, ETH_ALEN); @@ -170,7 +170,7 @@ static netdev_tx_t brcmf_netdev_start_xmit(struct sk_buff *skb, struct brcmf_pub *drvr = ifp->drvr; struct ethhdr *eh; - brcmf_dbg(TRACE, "Enter, idx=%d\n", ifp->idx); + brcmf_dbg(TRACE, "Enter, idx=%d\n", ifp->bssidx); /* Can the device send data? */ if (drvr->bus_if->state != BRCMF_BUS_DATA) { @@ -181,8 +181,8 @@ static netdev_tx_t brcmf_netdev_start_xmit(struct sk_buff *skb, goto done; } - if (!drvr->iflist[ifp->idx]) { - brcmf_err("bad ifidx %d\n", ifp->idx); + if (!drvr->iflist[ifp->bssidx]) { + brcmf_err("bad ifidx %d\n", ifp->bssidx); netif_stop_queue(ndev); dev_kfree_skb(skb); ret = -ENODEV; @@ -194,14 +194,14 @@ static netdev_tx_t brcmf_netdev_start_xmit(struct sk_buff *skb, struct sk_buff *skb2; brcmf_dbg(INFO, "%s: insufficient headroom\n", - brcmf_ifname(drvr, ifp->idx)); + brcmf_ifname(drvr, ifp->bssidx)); drvr->bus_if->tx_realloc++; skb2 = skb_realloc_headroom(skb, drvr->hdrlen); dev_kfree_skb(skb); skb = skb2; if (skb == NULL) { brcmf_err("%s: skb_realloc_headroom failed\n", - brcmf_ifname(drvr, ifp->idx)); + brcmf_ifname(drvr, ifp->bssidx)); ret = -ENOMEM; goto done; } @@ -222,7 +222,7 @@ static netdev_tx_t brcmf_netdev_start_xmit(struct sk_buff *skb, atomic_inc(&ifp->pend_8021x_cnt); /* If the protocol uses a data header, apply it */ - brcmf_proto_hdrpush(drvr, ifp->idx, skb); + brcmf_proto_hdrpush(drvr, ifp->ifidx, skb); /* Use bus module to send data frame */ ret = brcmf_bus_txdata(drvr->bus_if, skb); @@ -372,7 +372,7 @@ static struct net_device_stats *brcmf_netdev_get_stats(struct net_device *ndev) { struct brcmf_if *ifp = netdev_priv(ndev); - brcmf_dbg(TRACE, "Enter, idx=%d\n", ifp->idx); + brcmf_dbg(TRACE, "Enter, idx=%d\n", ifp->bssidx); return &ifp->stats; } @@ -424,7 +424,7 @@ static int brcmf_ethtool(struct brcmf_if *ifp, void __user *uaddr) u32 toe_cmpnt, csum_dir; int ret; - brcmf_dbg(TRACE, "Enter, idx=%d\n", ifp->idx); + brcmf_dbg(TRACE, "Enter, idx=%d\n", ifp->bssidx); /* all ethtool calls start with a cmd word */ if (copy_from_user(&cmd, uaddr, sizeof(u32))) @@ -521,9 +521,9 @@ static int brcmf_netdev_ioctl_entry(struct net_device *ndev, struct ifreq *ifr, struct brcmf_if *ifp = netdev_priv(ndev); struct brcmf_pub *drvr = ifp->drvr; - brcmf_dbg(TRACE, "Enter, bssidx=%d, cmd=0x%04x\n", ifp->idx, cmd); + brcmf_dbg(TRACE, "Enter, idx=%d, cmd=0x%04x\n", ifp->bssidx, cmd); - if (!drvr->iflist[ifp->idx]) + if (!drvr->iflist[ifp->bssidx]) return -1; if (cmd == SIOCETHTOOL) @@ -536,7 +536,7 @@ static int brcmf_netdev_stop(struct net_device *ndev) { struct brcmf_if *ifp = netdev_priv(ndev); - brcmf_dbg(TRACE, "Enter, idx=%d\n", ifp->idx); + brcmf_dbg(TRACE, "Enter, idx=%d\n", ifp->bssidx); brcmf_cfg80211_down(ndev); @@ -554,7 +554,7 @@ static int brcmf_netdev_open(struct net_device *ndev) u32 toe_ol; s32 ret = 0; - brcmf_dbg(TRACE, "Enter, idx=%d\n", ifp->idx); + brcmf_dbg(TRACE, "Enter, idx=%d\n", ifp->bssidx); /* If bus is not ready, can't continue */ if (bus_if->state != BRCMF_BUS_DATA) { @@ -606,12 +606,12 @@ int brcmf_net_attach(struct brcmf_if *ifp) struct brcmf_pub *drvr = ifp->drvr; struct net_device *ndev; - brcmf_dbg(TRACE, "Enter, idx=%d mac=%pM\n", ifp->idx, + brcmf_dbg(TRACE, "Enter, idx=%d mac=%pM\n", ifp->bssidx, ifp->mac_addr); ndev = ifp->ndev; /* set appropriate operations */ - if (!ifp->idx) + if (!ifp->bssidx) ndev->netdev_ops = &brcmf_netdev_ops_pri; else ndev->netdev_ops = &brcmf_netdev_ops_virt; @@ -639,16 +639,15 @@ fail: return -EBADE; } -struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, int ifidx, s32 bssidx, - char *name, u8 *addr_mask) +struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, s32 bssidx, s32 ifidx, + char *name, u8 *mac_addr) { struct brcmf_if *ifp; struct net_device *ndev; - int i; - brcmf_dbg(TRACE, "Enter, bssidx=%d, ifidx=%d\n", bssidx, ifidx); + brcmf_dbg(TRACE, "Enter, idx=%d, ifidx=%d\n", bssidx, ifidx); - ifp = drvr->iflist[ifidx]; + ifp = drvr->iflist[bssidx]; /* * Delete the existing interface before overwriting it * in case we missed the BRCMF_E_IF_DEL event. @@ -656,11 +655,11 @@ struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, int ifidx, s32 bssidx, if (ifp) { brcmf_err("ERROR: netdev:%s already exists\n", ifp->ndev->name); - if (ifidx) { + if (bssidx) { netif_stop_queue(ifp->ndev); unregister_netdev(ifp->ndev); free_netdev(ifp->ndev); - drvr->iflist[ifidx] = NULL; + drvr->iflist[bssidx] = NULL; } else { brcmf_err("ignore IF event\n"); return ERR_PTR(-EINVAL); @@ -677,8 +676,8 @@ struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, int ifidx, s32 bssidx, ifp = netdev_priv(ndev); ifp->ndev = ndev; ifp->drvr = drvr; - drvr->iflist[ifidx] = ifp; - ifp->idx = ifidx; + drvr->iflist[bssidx] = ifp; + ifp->ifidx = ifidx; ifp->bssidx = bssidx; INIT_WORK(&ifp->setmacaddr_work, _brcmf_set_mac_address); @@ -686,9 +685,8 @@ struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, int ifidx, s32 bssidx, init_waitqueue_head(&ifp->pend_8021x_wait); - if (addr_mask != NULL) - for (i = 0; i < ETH_ALEN; i++) - ifp->mac_addr[i] = drvr->mac[i] ^ addr_mask[i]; + if (mac_addr != NULL) + memcpy(ifp->mac_addr, mac_addr, ETH_ALEN); brcmf_dbg(TRACE, " ==== pid:%x, if:%s (%pM) created ===\n", current->pid, ifp->ndev->name, ifp->mac_addr); @@ -696,18 +694,18 @@ struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, int ifidx, s32 bssidx, return ifp; } -void brcmf_del_if(struct brcmf_pub *drvr, int ifidx) +void brcmf_del_if(struct brcmf_pub *drvr, s32 bssidx) { struct brcmf_if *ifp; - ifp = drvr->iflist[ifidx]; + ifp = drvr->iflist[bssidx]; if (!ifp) { - brcmf_err("Null interface, idx=%d\n", ifidx); + brcmf_err("Null interface, idx=%d\n", bssidx); return; } - brcmf_dbg(TRACE, "Enter, idx=%d, bssidx=%d\n", ifidx, ifp->bssidx); + brcmf_dbg(TRACE, "Enter, idx=%d, ifidx=%d\n", bssidx, ifp->ifidx); if (ifp->ndev) { - if (ifidx == 0) { + if (bssidx == 0) { if (ifp->ndev->netdev_ops == &brcmf_netdev_ops_pri) { rtnl_lock(); brcmf_netdev_stop(ifp->ndev); @@ -721,8 +719,8 @@ void brcmf_del_if(struct brcmf_pub *drvr, int ifidx) cancel_work_sync(&ifp->multicast_work); unregister_netdev(ifp->ndev); - drvr->iflist[ifidx] = NULL; - if (ifidx == 0) + drvr->iflist[bssidx] = NULL; + if (bssidx == 0) brcmf_cfg80211_detach(drvr->config); free_netdev(ifp->ndev); } @@ -815,7 +813,7 @@ fail: brcmf_err("failed: %d\n", ret); if (drvr->config) brcmf_cfg80211_detach(drvr->config); - free_netdev(drvr->iflist[0]->ndev); + free_netdev(ifp->ndev); drvr->iflist[0] = NULL; return ret; } @@ -849,7 +847,7 @@ void brcmf_dev_reset(struct device *dev) void brcmf_detach(struct device *dev) { - int i; + s32 i; struct brcmf_bus *bus_if = dev_get_drvdata(dev); struct brcmf_pub *drvr = bus_if->drvr; diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fweh.c b/drivers/net/wireless/brcm80211/brcmfmac/fweh.c index ba0b22512f12..1fd29b08e632 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/fweh.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/fweh.c @@ -189,12 +189,12 @@ static void brcmf_fweh_handle_if_event(struct brcmf_pub *drvr, return; } - ifp = drvr->iflist[ifevent->ifidx]; + ifp = drvr->iflist[ifevent->bssidx]; if (ifevent->action == BRCMF_E_IF_ADD) { brcmf_dbg(EVENT, "adding %s (%pM)\n", emsg->ifname, emsg->addr); - ifp = brcmf_add_if(drvr, ifevent->ifidx, ifevent->bssidx, + ifp = brcmf_add_if(drvr, ifevent->bssidx, ifevent->ifidx, emsg->ifname, emsg->addr); if (IS_ERR(ifp)) return; @@ -206,7 +206,7 @@ static void brcmf_fweh_handle_if_event(struct brcmf_pub *drvr, err = brcmf_fweh_call_event_handler(ifp, emsg->event_code, emsg, data); if (ifevent->action == BRCMF_E_IF_DEL) - brcmf_del_if(drvr, ifevent->ifidx); + brcmf_del_if(drvr, ifevent->bssidx); } /** @@ -250,8 +250,6 @@ static void brcmf_fweh_event_worker(struct work_struct *work) drvr = container_of(fweh, struct brcmf_pub, fweh); while ((event = brcmf_fweh_dequeue_event(fweh))) { - ifp = drvr->iflist[event->ifidx]; - brcmf_dbg(EVENT, "event %s (%u) ifidx %u bsscfg %u addr %pM\n", brcmf_fweh_event_name(event->code), event->code, event->emsg.ifidx, event->emsg.bsscfgidx, @@ -283,6 +281,7 @@ static void brcmf_fweh_event_worker(struct work_struct *work) goto event_free; } + ifp = drvr->iflist[emsg.bsscfgidx]; err = brcmf_fweh_call_event_handler(ifp, event->code, &emsg, event->data); if (err) { diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fwil.c b/drivers/net/wireless/brcm80211/brcmfmac/fwil.c index f6ffcf63cccb..8d1def935b8d 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/fwil.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/fwil.c @@ -45,9 +45,10 @@ brcmf_fil_cmd_data(struct brcmf_if *ifp, u32 cmd, void *data, u32 len, bool set) if (data != NULL) len = min_t(uint, len, BRCMF_DCMD_MAXLEN); if (set) - err = brcmf_proto_cdc_set_dcmd(drvr, ifp->idx, cmd, data, len); + err = brcmf_proto_cdc_set_dcmd(drvr, ifp->ifidx, cmd, data, + len); else - err = brcmf_proto_cdc_query_dcmd(drvr, ifp->idx, cmd, data, + err = brcmf_proto_cdc_query_dcmd(drvr, ifp->ifidx, cmd, data, len); if (err >= 0) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index d47b274018ba..d78f946c9e1c 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -3546,6 +3546,7 @@ brcmf_cfg80211_start_ap(struct wiphy *wiphy, struct net_device *ndev, if (err < 0) { brcmf_err("BRCMF_C_UP error (%d)\n", err); goto exit; + brcmf_fil_iovar_int_set(ifp, "apsta", 0); } memset(&join_params, 0, sizeof(join_params)); @@ -4242,6 +4243,7 @@ struct brcmf_cfg80211_info *brcmf_cfg80211_attach(struct brcmf_pub *drvr, cfg80211_attach_out: brcmf_free_vif(vif); + wiphy_free(wiphy); return NULL; } From 643ecaab355c3879215cb34c10ae88d729e408be Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Fri, 8 Feb 2013 12:06:32 +0100 Subject: [PATCH 079/209] brcmfmac: Check null pointer on brcmf_dev_reset. When unloading it is possible that drvr is not null, but iflist[0] is. So check iflist[0] pointer before using it. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Piotr Haber Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c index db03d30f60b7..f90db576e90b 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c @@ -842,7 +842,8 @@ void brcmf_dev_reset(struct device *dev) if (drvr == NULL) return; - brcmf_fil_cmd_int_set(drvr->iflist[0], BRCMF_C_TERMINATED, 1); + if (drvr->iflist[0]) + brcmf_fil_cmd_int_set(drvr->iflist[0], BRCMF_C_TERMINATED, 1); } void brcmf_detach(struct device *dev) From b55de97ffd920e2bb1104eca272688f1be7329c2 Mon Sep 17 00:00:00 2001 From: Piotr Haber Date: Fri, 8 Feb 2013 12:06:33 +0100 Subject: [PATCH 080/209] brcmfmac: fix mmc host locking issue fix wrong locking in crash info processing Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Hante Meuleman Signed-off-by: Piotr Haber Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c index 04680c56bafc..9a1f823ad31d 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c @@ -2701,7 +2701,7 @@ static int brcmf_sdio_readshared(struct brcmf_sdio *bus, sdio_claim_host(bus->sdiodev->func[1]); rv = brcmf_sdbrcm_membytes(bus, false, shaddr, (u8 *)&addr_le, 4); - sdio_claim_host(bus->sdiodev->func[1]); + sdio_release_host(bus->sdiodev->func[1]); if (rv < 0) return rv; From bd16e3555fb61a6f3792c6efec5b63697e051e42 Mon Sep 17 00:00:00 2001 From: Piotr Haber Date: Fri, 8 Feb 2013 12:06:34 +0100 Subject: [PATCH 081/209] brcmfmac: turn clocks on when reading shared info Make sure backplane clocks are on while reading crash data. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Hante Meuleman Signed-off-by: Piotr Haber Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c index 9a1f823ad31d..97764b489d9b 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c @@ -2699,6 +2699,7 @@ static int brcmf_sdio_readshared(struct brcmf_sdio *bus, * address of sdpcm_shared structure */ sdio_claim_host(bus->sdiodev->func[1]); + brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, false); rv = brcmf_sdbrcm_membytes(bus, false, shaddr, (u8 *)&addr_le, 4); sdio_release_host(bus->sdiodev->func[1]); From 0bc9a8cb24f9a1fa556c081cd9d9edc89121a636 Mon Sep 17 00:00:00 2001 From: Piotr Haber Date: Fri, 8 Feb 2013 12:06:35 +0100 Subject: [PATCH 082/209] brcmfmac: remove unnecessary locking in trap info processing Locking host access in trap info processing is not needed as bus access functions do it on their own. Reviewed-by: Arend Van Spriel Reviewed-by: Hante Meuleman Signed-off-by: Piotr Haber Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c index 97764b489d9b..35817631ea06 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c @@ -2721,10 +2721,8 @@ static int brcmf_sdio_readshared(struct brcmf_sdio *bus, } /* Read hndrte_shared structure */ - sdio_claim_host(bus->sdiodev->func[1]); rv = brcmf_sdbrcm_membytes(bus, false, addr, (u8 *)&sh_le, sizeof(struct sdpcm_shared_le)); - sdio_release_host(bus->sdiodev->func[1]); if (rv < 0) return rv; @@ -2826,14 +2824,12 @@ static int brcmf_sdio_trap_info(struct brcmf_sdio *bus, struct sdpcm_shared *sh, if ((sh->flags & SDPCM_SHARED_TRAP) == 0) return 0; - sdio_claim_host(bus->sdiodev->func[1]); error = brcmf_sdbrcm_membytes(bus, false, sh->trap_addr, (u8 *)&tr, sizeof(struct brcmf_trap_info)); if (error < 0) return error; nbytes = brcmf_sdio_dump_console(bus, sh, data, count); - sdio_release_host(bus->sdiodev->func[1]); if (nbytes < 0) return nbytes; From 9f440b7bc786883c117be9c0f438a27b356f64b4 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Fri, 8 Feb 2013 15:53:36 +0100 Subject: [PATCH 083/209] brcmfmac: add peer-to-peer group discovery support First part for P2P support. It is a variation on the existing scanning functionality and is used to discover peer-to-peer group owners and/or peer-to-peer devices in listen state. Tested with wpa_cli/wpa_supplicant v2.0-devel. Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- .../net/wireless/brcm80211/brcmfmac/Makefile | 3 +- .../wireless/brcm80211/brcmfmac/dhd_linux.c | 1 + drivers/net/wireless/brcm80211/brcmfmac/p2p.c | 734 ++++++++++++++++++ drivers/net/wireless/brcm80211/brcmfmac/p2p.h | 114 +++ .../wireless/brcm80211/brcmfmac/wl_cfg80211.c | 199 +++-- .../wireless/brcm80211/brcmfmac/wl_cfg80211.h | 78 +- 6 files changed, 1078 insertions(+), 51 deletions(-) create mode 100644 drivers/net/wireless/brcm80211/brcmfmac/p2p.c create mode 100644 drivers/net/wireless/brcm80211/brcmfmac/p2p.h diff --git a/drivers/net/wireless/brcm80211/brcmfmac/Makefile b/drivers/net/wireless/brcm80211/brcmfmac/Makefile index 1a6661a9f008..756e19fc2795 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/Makefile +++ b/drivers/net/wireless/brcm80211/brcmfmac/Makefile @@ -26,6 +26,7 @@ brcmfmac-objs += \ wl_cfg80211.o \ fwil.o \ fweh.o \ + p2p.o \ dhd_cdc.o \ dhd_common.o \ dhd_linux.o @@ -37,4 +38,4 @@ brcmfmac-$(CONFIG_BRCMFMAC_SDIO) += \ brcmfmac-$(CONFIG_BRCMFMAC_USB) += \ usb.o brcmfmac-$(CONFIG_BRCMDBG) += \ - dhd_dbg.o \ No newline at end of file + dhd_dbg.o diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c index f90db576e90b..b469bd19dfd0 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c @@ -26,6 +26,7 @@ #include "dhd_bus.h" #include "dhd_proto.h" #include "dhd_dbg.h" +#include "p2p.h" #include "wl_cfg80211.h" #include "fwil.h" diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c new file mode 100644 index 000000000000..22d9de81e08f --- /dev/null +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c @@ -0,0 +1,734 @@ +/* + * Copyright (c) 2012 Broadcom Corporation + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY + * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION + * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN + * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ +#include +#include +#include + +#include +#include +#include +#include +#include +#include "fwil.h" +#include "p2p.h" +#include "wl_cfg80211.h" + +/* parameters used for p2p escan */ +#define P2PAPI_SCAN_NPROBES 1 +#define P2PAPI_SCAN_DWELL_TIME_MS 80 +#define P2PAPI_SCAN_SOCIAL_DWELL_TIME_MS 40 +#define P2PAPI_SCAN_HOME_TIME_MS 60 +#define P2PAPI_SCAN_NPROBS_TIME_MS 30 +#define P2PAPI_SCAN_AF_SEARCH_DWELL_TIME_MS 100 +#define WL_SCAN_CONNECT_DWELL_TIME_MS 200 +#define WL_SCAN_JOIN_PROBE_INTERVAL_MS 20 + +#define BRCMF_P2P_WILDCARD_SSID "DIRECT-" +#define BRCMF_P2P_WILDCARD_SSID_LEN (sizeof(BRCMF_P2P_WILDCARD_SSID) - 1) + +#define SOCIAL_CHAN_1 1 +#define SOCIAL_CHAN_2 6 +#define SOCIAL_CHAN_3 11 +#define SOCIAL_CHAN_CNT 3 +#define AF_PEER_SEARCH_CNT 2 + +/** + * struct brcmf_p2p_disc_st_le - set discovery state in firmware. + * + * @state: requested discovery state (see enum brcmf_p2p_disc_state). + * @chspec: channel parameter for %WL_P2P_DISC_ST_LISTEN state. + * @dwell: dwell time in ms for %WL_P2P_DISC_ST_LISTEN state. + */ +struct brcmf_p2p_disc_st_le { + u8 state; + __le16 chspec; + __le16 dwell; +}; + +/** + * enum brcmf_p2p_disc_state - P2P discovery state values + * + * @WL_P2P_DISC_ST_SCAN: P2P discovery with wildcard SSID and P2P IE. + * @WL_P2P_DISC_ST_LISTEN: P2P discovery off-channel for specified time. + * @WL_P2P_DISC_ST_SEARCH: P2P discovery with P2P wildcard SSID and P2P IE. + */ +enum brcmf_p2p_disc_state { + WL_P2P_DISC_ST_SCAN, + WL_P2P_DISC_ST_LISTEN, + WL_P2P_DISC_ST_SEARCH +}; + +/** + * struct brcmf_p2p_scan_le - P2P specific scan request. + * + * @type: type of scan method requested (values: 'E' or 'S'). + * @reserved: reserved (ignored). + * @eparams: parameters used for type 'E'. + * @sparams: parameters used for type 'S'. + */ +struct brcmf_p2p_scan_le { + u8 type; + u8 reserved[3]; + union { + struct brcmf_escan_params_le eparams; + struct brcmf_scan_params_le sparams; + }; +}; + +static struct brcmf_cfg80211_vif *p2p_discover_vif(struct brcmf_p2p_info *p2p) +{ + return p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif; +} + +/** + * brcmf_p2p_set_firmware() - prepare firmware for peer-to-peer operation. + * + * @p2p: P2P specific data. + */ +static int brcmf_p2p_set_firmware(struct brcmf_p2p_info *p2p) +{ + struct net_device *ndev = cfg_to_ndev(p2p->cfg); + u8 null_eth_addr[] = { 0, 0, 0, 0, 0, 0 }; + s32 ret = 0; + + brcmf_fil_iovar_int_set(netdev_priv(ndev), "apsta", 1); + + /* In case of COB type, firmware has default mac address + * After Initializing firmware, we have to set current mac address to + * firmware for P2P device address + */ + ret = brcmf_fil_iovar_data_set(netdev_priv(ndev), "p2p_da_override", + null_eth_addr, sizeof(null_eth_addr)); + if (ret) + brcmf_err("failed to update device address ret %d\n", ret); + + return ret; +} + +/** + * brcmf_p2p_generate_bss_mac() - derive mac addresses for P2P. + * + * @p2p: P2P specific data. + * + * P2P needs mac addresses for P2P device and interface. These are + * derived from the primary net device, ie. the permanent ethernet + * address of the device. + */ +static void brcmf_p2p_generate_bss_mac(struct brcmf_p2p_info *p2p) +{ + struct net_device *ndev = cfg_to_ndev(p2p->cfg); + + /* Generate the P2P Device Address. This consists of the device's + * primary MAC address with the locally administered bit set. + */ + memcpy(p2p->dev_addr, ndev->dev_addr, ETH_ALEN); + p2p->dev_addr[0] |= 0x02; + + /* Generate the P2P Interface Address. If the discovery and connection + * BSSCFGs need to simultaneously co-exist, then this address must be + * different from the P2P Device Address, but also locally administered. + */ + memcpy(p2p->int_addr, p2p->dev_addr, ETH_ALEN); + p2p->int_addr[4] ^= 0x80; +} + +/** + * brcmf_p2p_scan_is_p2p_request() - is cfg80211 scan request a P2P scan. + * + * @request: the scan request as received from cfg80211. + * + * returns true if one of the ssids in the request matches the + * P2P wildcard ssid; otherwise returns false. + */ +static bool brcmf_p2p_scan_is_p2p_request(struct cfg80211_scan_request *request) +{ + struct cfg80211_ssid *ssids = request->ssids; + int i; + + for (i = 0; i < request->n_ssids; i++) { + if (ssids[i].ssid_len != BRCMF_P2P_WILDCARD_SSID_LEN) + continue; + + brcmf_dbg(INFO, "comparing ssid \"%s\"", ssids[i].ssid); + if (!memcmp(BRCMF_P2P_WILDCARD_SSID, ssids[i].ssid, + BRCMF_P2P_WILDCARD_SSID_LEN)) + return true; + } + return false; +} + +/** + * brcmf_p2p_set_discover_state - set discover state in firmware. + * + * @ifp: low-level interface object. + * @state: discover state to set. + * @chanspec: channel parameters (for state @WL_P2P_DISC_ST_LISTEN only). + * @listen_ms: duration to listen (for state @WL_P2P_DISC_ST_LISTEN only). + */ +static s32 brcmf_p2p_set_discover_state(struct brcmf_if *ifp, u8 state, + u16 chanspec, u16 listen_ms) +{ + struct brcmf_p2p_disc_st_le discover_state; + s32 ret = 0; + brcmf_dbg(TRACE, "enter\n"); + + discover_state.state = state; + discover_state.chspec = cpu_to_le16(chanspec); + discover_state.dwell = cpu_to_le16(listen_ms); + ret = brcmf_fil_bsscfg_data_set(ifp, "p2p_state", &discover_state, + sizeof(discover_state)); + return ret; +} + +/** + * brcmf_p2p_discover_disable_search() - reset discover state. + * + * @p2p: P2P specific data. + * + * Reset the discover state to @WL_P2P_DISC_ST_SCAN. Returns 0 on success. + */ +static s32 brcmf_p2p_discover_disable_search(struct brcmf_p2p_info *p2p) +{ + struct brcmf_cfg80211_vif *vif = p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif; + struct brcmf_p2p_disc_st_le discovery_mode; + int ret; + + /* + * vif presence indicates discovery is initialized. + */ + if (!vif) + return -ENODEV; + + ret = brcmf_fil_bsscfg_data_get(vif->ifp, "p2p_state", + &discovery_mode, + sizeof(discovery_mode)); + if (!ret && discovery_mode.state != WL_P2P_DISC_ST_SCAN) + ret = brcmf_p2p_set_discover_state(vif->ifp, + WL_P2P_DISC_ST_SCAN, 0, 0); + return ret; +} + +/** + * brcmf_p2p_init_discovery() - enable discovery in the firmware. + * + * @p2p: P2P specific data. + * + * Configures the firmware to allow P2P peer discovery. Creates the + * virtual interface and consequently the P2P device for it. + */ +static s32 brcmf_p2p_init_discovery(struct brcmf_p2p_info *p2p) +{ + struct net_device *ndev = cfg_to_ndev(p2p->cfg); + struct brcmf_cfg80211_vif *vif; + struct brcmf_if *ifp; + struct p2p_bss *bss_dev; + s32 index; + s32 ret; + + brcmf_dbg(TRACE, "enter\n"); + + bss_dev = &p2p->bss_idx[P2PAPI_BSSCFG_DEVICE]; + if (bss_dev->vif != NULL) { + brcmf_dbg(INFO, "do nothing, already initialized\n"); + return 0; + } + + /* Enable P2P Discovery in the firmware */ + ret = brcmf_fil_iovar_int_set(netdev_priv(ndev), "p2p_disc", 1); + if (ret < 0) { + brcmf_err("set discover error\n"); + return ret; + } + + /* obtain bsscfg index for P2P discovery */ + ret = brcmf_fil_iovar_int_get(netdev_priv(ndev), "p2p_dev", &index); + if (ret < 0) { + brcmf_err("retrieving discover bsscfg index failed\n"); + return ret; + } + + /* + * need brcmf_if for setting the discovery state. + */ + ifp = kzalloc(sizeof(*vif->ifp), GFP_KERNEL); + if (!ifp) { + brcmf_err("could not create discovery if\n"); + return -ENOMEM; + } + + /* set required fields */ + ifp->drvr = p2p->cfg->pub; + ifp->ifidx = 0; + ifp->bssidx = index; + + /* Set the initial discovery state to SCAN */ + ret = brcmf_p2p_set_discover_state(ifp, WL_P2P_DISC_ST_SCAN, 0, 0); + + if (ret != 0) { + brcmf_err("unable to set WL_P2P_DISC_ST_SCAN\n"); + (void)brcmf_fil_iovar_int_set(netdev_priv(ndev), "p2p_disc", 0); + kfree(ifp); + return ret; + } + + /* create a vif for it */ + vif = brcmf_alloc_vif(p2p->cfg, NULL, NL80211_IFTYPE_P2P_DEVICE, false); + if (IS_ERR(vif)) { + brcmf_err("could not create discovery vif\n"); + kfree(ifp); + return PTR_ERR(vif); + } + + vif->ifp = ifp; + ifp->vif = vif; + bss_dev->vif = vif; + + return 0; +} + +/** + * brcmf_p2p_deinit_discovery() - disable P2P device discovery. + * + * @p2p: P2P specific data. + * + * Resets the discovery state and disables it in firmware. The virtual + * interface and P2P device are freed. + */ +static s32 brcmf_p2p_deinit_discovery(struct brcmf_p2p_info *p2p) +{ + struct net_device *ndev = cfg_to_ndev(p2p->cfg); + struct brcmf_if *ifp; + struct p2p_bss *bss_dev; + brcmf_dbg(TRACE, "enter\n"); + + bss_dev = &p2p->bss_idx[P2PAPI_BSSCFG_DEVICE]; + if (bss_dev->vif == NULL) { + brcmf_err("do nothing, not initialized\n"); + return -EINVAL; + } + + ifp = bss_dev->vif->ifp; + + /* Set the discovery state to SCAN */ + (void)brcmf_p2p_set_discover_state(ifp, WL_P2P_DISC_ST_SCAN, 0, 0); + + /* Disable P2P discovery in the firmware */ + (void)brcmf_fil_iovar_int_set(netdev_priv(ndev), "p2p_disc", 0); + + /* remove discovery interface */ + brcmf_free_vif(bss_dev->vif); + bss_dev->vif = NULL; + kfree(ifp); + + return 0; +} + +/** + * brcmf_p2p_enable_discovery() - initialize and configure discovery. + * + * @p2p: P2P specific data. + * @ie: buffer containing information elements. + * @ie_len: length of @ie buffer. + * + * Initializes the discovery device and configure the virtual interface. + */ +static int brcmf_p2p_enable_discovery(struct brcmf_p2p_info *p2p, + const u8 *ie, u32 ie_len) +{ + struct brcmf_cfg80211_vif *vif; + s32 ret = 0; + + brcmf_dbg(TRACE, "enter\n"); + vif = p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif; + if (vif) { + brcmf_dbg(INFO, + "DISCOVERY init already done, just process IE\n"); + goto set_ie; + } + + ret = brcmf_p2p_init_discovery(p2p); + if (ret < 0) { + brcmf_err("init discovery error %d\n", ret); + goto exit; + } + + vif = p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif; + + /* + * Set wsec to any non-zero value in the discovery bsscfg + * to ensure our P2P probe responses have the privacy bit + * set in the 802.11 WPA IE. Some peer devices may not + * initiate WPS with us if this bit is not set. + */ + ret = brcmf_fil_bsscfg_int_set(vif->ifp, "wsec", AES_ENABLED); + if (ret < 0) + brcmf_err("wsec error %d\n", ret); + +set_ie: + if (ie_len) { + ret = brcmf_vif_set_mgmt_ie(vif, BRCMF_VNDR_IE_PRBREQ_FLAG, + ie, ie_len); + + if (ret < 0) { + brcmf_err("set probreq ie occurs error %d\n", ret); + goto exit; + } + } +exit: + return ret; +} + +/* + * brcmf_p2p_escan() - initiate a P2P scan. + * + * @p2p: P2P specific data. + * @num_chans: number of channels to scan. + * @chanspecs: channel parameters for @num_chans channels. + * @search_state: P2P discover state to use. + * @action: scan action to pass to firmware. + * @bss_type: type of P2P bss. + */ +static s32 brcmf_p2p_escan(struct brcmf_p2p_info *p2p, u32 num_chans, + u16 chanspecs[], s32 search_state, u16 action, + enum p2p_bss_type bss_type) +{ + s32 ret = 0; + s32 memsize = offsetof(struct brcmf_p2p_scan_le, + eparams.params_le.channel_list); + s32 nprobes; + s32 active; + u32 i; + u8 *memblk; + struct brcmf_cfg80211_vif *vif; + struct brcmf_p2p_scan_le *p2p_params; + struct brcmf_scan_params_le *sparams; + struct brcmf_ssid ssid; + + /* add padding if uneven */ + if (num_chans % 2) + memsize += sizeof(__le16); + memsize += num_chans * sizeof(__le16); + memblk = kzalloc(memsize, GFP_KERNEL); + if (!memblk) + return -ENOMEM; + + vif = p2p->bss_idx[bss_type].vif; + if (vif == NULL) { + brcmf_err("no vif for bss type %d\n", bss_type); + ret = -EINVAL; + goto exit; + } + + switch (search_state) { + case WL_P2P_DISC_ST_SEARCH: + /* + * If we in SEARCH STATE, we don't need to set SSID explictly + * because dongle use P2P WILDCARD internally by default + */ + /* use null ssid */ + ssid.SSID_len = 0; + memset(ssid.SSID, 0, sizeof(ssid.SSID)); + break; + case WL_P2P_DISC_ST_SCAN: + /* + * wpa_supplicant has p2p_find command with type social or + * progressive. For progressive, we need to set the ssid to + * P2P WILDCARD because we just do broadcast scan unless + * setting SSID. + */ + ssid.SSID_len = BRCMF_P2P_WILDCARD_SSID_LEN; + memcpy(ssid.SSID, BRCMF_P2P_WILDCARD_SSID, ssid.SSID_len); + break; + default: + brcmf_err(" invalid search state %d\n", search_state); + ret = -EINVAL; + goto exit; + } + + brcmf_p2p_set_discover_state(vif->ifp, search_state, 0, 0); + + /* + * set p2p scan parameters. + */ + p2p_params = (struct brcmf_p2p_scan_le *)memblk; + p2p_params->type = 'E'; + + /* determine the scan engine parameters */ + sparams = &p2p_params->eparams.params_le; + sparams->bss_type = DOT11_BSSTYPE_ANY; + if (p2p->cfg->active_scan) + sparams->scan_type = 0; + else + sparams->scan_type = 1; + + memset(&sparams->bssid, 0xFF, ETH_ALEN); + if (ssid.SSID_len) + memcpy(sparams->ssid_le.SSID, ssid.SSID, ssid.SSID_len); + sparams->ssid_le.SSID_len = cpu_to_le32(ssid.SSID_len); + sparams->home_time = cpu_to_le32(P2PAPI_SCAN_HOME_TIME_MS); + + /* + * SOCIAL_CHAN_CNT + 1 takes care of the Progressive scan + * supported by the supplicant. + */ + if (num_chans == SOCIAL_CHAN_CNT || num_chans == (SOCIAL_CHAN_CNT + 1)) + active = P2PAPI_SCAN_SOCIAL_DWELL_TIME_MS; + else if (num_chans == AF_PEER_SEARCH_CNT) + active = P2PAPI_SCAN_AF_SEARCH_DWELL_TIME_MS; + else if (wl_get_vif_state_all(p2p->cfg, BRCMF_VIF_STATUS_CONNECTED)) + active = -1; + else + active = P2PAPI_SCAN_DWELL_TIME_MS; + + /* Override scan params to find a peer for a connection */ + if (num_chans == 1) { + active = WL_SCAN_CONNECT_DWELL_TIME_MS; + /* XXX WAR to sync with presence period of VSDB GO. + * send probe request more frequently + */ + nprobes = active / WL_SCAN_JOIN_PROBE_INTERVAL_MS; + } else { + nprobes = active / P2PAPI_SCAN_NPROBS_TIME_MS; + } + + if (nprobes <= 0) + nprobes = 1; + + brcmf_dbg(INFO, "nprobes # %d, active_time %d\n", nprobes, active); + sparams->active_time = cpu_to_le32(active); + sparams->nprobes = cpu_to_le32(nprobes); + sparams->passive_time = cpu_to_le32(-1); + sparams->channel_num = cpu_to_le32(num_chans & + BRCMF_SCAN_PARAMS_COUNT_MASK); + for (i = 0; i < num_chans; i++) + sparams->channel_list[i] = cpu_to_le16(chanspecs[i]); + + /* set the escan specific parameters */ + p2p_params->eparams.version = cpu_to_le32(BRCMF_ESCAN_REQ_VERSION); + p2p_params->eparams.action = cpu_to_le16(action); + p2p_params->eparams.sync_id = cpu_to_le16(0x1234); + /* perform p2p scan on primary device */ + ret = brcmf_fil_bsscfg_data_set(vif->ifp, "p2p_scan", memblk, memsize); + if (!ret) + set_bit(BRCMF_SCAN_STATUS_BUSY, &p2p->cfg->scan_status); +exit: + kfree(memblk); + return ret; +} + +/** + * brcmf_p2p_run_escan() - escan callback for peer-to-peer. + * + * @cfg: driver private data for cfg80211 interface. + * @ndev: net device for which scan is requested. + * @request: scan request from cfg80211. + * @action: scan action. + * + * Determines the P2P discovery state based to scan request parameters and + * validates the channels in the request. + */ +static s32 brcmf_p2p_run_escan(struct brcmf_cfg80211_info *cfg, + struct net_device *ndev, + struct cfg80211_scan_request *request, + u16 action) +{ + struct brcmf_p2p_info *p2p = &cfg->p2p; + s32 err = 0; + s32 search_state = WL_P2P_DISC_ST_SCAN; + struct brcmf_cfg80211_vif *vif; + struct net_device *dev = NULL; + int i, num_nodfs = 0; + u16 *chanspecs; + + brcmf_dbg(TRACE, "enter\n"); + + if (!request) { + err = -EINVAL; + goto exit; + } + + if (request->n_channels) { + chanspecs = kcalloc(request->n_channels, sizeof(*chanspecs), + GFP_KERNEL); + if (!chanspecs) { + err = -ENOMEM; + goto exit; + } + vif = p2p->bss_idx[P2PAPI_BSSCFG_CONNECTION].vif; + if (vif) + dev = vif->wdev.netdev; + if (request->n_channels == 3 && + request->channels[0]->hw_value == SOCIAL_CHAN_1 && + request->channels[1]->hw_value == SOCIAL_CHAN_2 && + request->channels[2]->hw_value == SOCIAL_CHAN_3) { + /* SOCIAL CHANNELS 1, 6, 11 */ + search_state = WL_P2P_DISC_ST_SEARCH; + brcmf_dbg(INFO, "P2P SEARCH PHASE START\n"); + } else if (dev != NULL && vif->mode == WL_MODE_AP) { + /* If you are already a GO, then do SEARCH only */ + brcmf_dbg(INFO, "Already a GO. Do SEARCH Only\n"); + search_state = WL_P2P_DISC_ST_SEARCH; + } else { + brcmf_dbg(INFO, "P2P SCAN STATE START\n"); + } + + /* + * no P2P scanning on passive or DFS channels. + */ + for (i = 0; i < request->n_channels; i++) { + struct ieee80211_channel *chan = request->channels[i]; + + if (chan->flags & (IEEE80211_CHAN_RADAR | + IEEE80211_CHAN_PASSIVE_SCAN)) + continue; + + chanspecs[i] = channel_to_chanspec(chan); + brcmf_dbg(INFO, "%d: chan=%d, channel spec=%x\n", + num_nodfs, chan->hw_value, chanspecs[i]); + num_nodfs++; + } + err = brcmf_p2p_escan(p2p, num_nodfs, chanspecs, search_state, + action, P2PAPI_BSSCFG_DEVICE); + } +exit: + if (err) + brcmf_err("error (%d)\n", err); + return err; +} + +/** + * brcmf_p2p_scan_prep() - prepare scan based on request. + * + * @wiphy: wiphy device. + * @request: scan request from cfg80211. + * + * Prepare the scan appropriately for type of scan requested. Overrides the + * escan .run() callback for peer-to-peer scanning. + */ +int brcmf_p2p_scan_prep(struct wiphy *wiphy, + struct cfg80211_scan_request *request) +{ + struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); + struct brcmf_p2p_info *p2p = &cfg->p2p; + int err = 0; + + if (brcmf_p2p_scan_is_p2p_request(request)) { + /* find my listen channel */ + err = cfg80211_get_p2p_attr(request->ie, request->ie_len, + IEEE80211_P2P_ATTR_LISTEN_CHANNEL, + &p2p->listen_channel, 1); + if (err < 0) + return err; + + clear_bit(BRCMF_P2P_STATUS_GO_NEG_PHASE, &p2p->status); + brcmf_dbg(INFO, "P2P: GO_NEG_PHASE status cleared\n"); + + err = brcmf_p2p_enable_discovery(p2p, request->ie, + request->ie_len); + + /* + * override .run_escan() callback. + */ + cfg->escan_info.run = brcmf_p2p_run_escan; + } else { + /* + * legacy scan trigger + * So, we have to disable p2p discovery if p2p discovery is on + */ + (void)brcmf_p2p_discover_disable_search(p2p); + + /* + * clear p2p vendor ies for probe request set by + * previous p2p related scan(s). + */ + if (p2p_discover_vif(p2p)) + err = brcmf_vif_set_mgmt_ie(p2p_discover_vif(p2p), + BRCMF_VNDR_IE_PRBREQ_FLAG, + request->ie, + request->ie_len); + } + return err; +} + +/** + * brcmf_p2p_attach() - attach for P2P. + * + * @cfg: driver private data for cfg80211 interface. + */ +void brcmf_p2p_attach(struct brcmf_cfg80211_info *cfg) +{ + struct brcmf_p2p_info *p2p; + + p2p = &cfg->p2p; + + p2p->cfg = cfg; + brcmf_p2p_set_firmware(p2p); + brcmf_p2p_generate_bss_mac(p2p); +} + +/** + * brcmf_p2p_detach() - detach P2P. + * + * @p2p: P2P specific data. + */ +void brcmf_p2p_detach(struct brcmf_p2p_info *p2p) +{ + brcmf_p2p_deinit_discovery(p2p); + /* just set it all to zero */ + memset(p2p, 0, sizeof(*p2p)); +} + +/** + * brcmf_p2p_add_vif() - create a new P2P virtual interface. + * + * @wiphy: wiphy device of new interface. + * @name: name of the new interface. + * @type: nl80211 interface type. + * @flags: TBD + * @params: TBD + * + * TODO: not yet supported. + */ +struct wireless_dev *brcmf_p2p_add_vif(struct wiphy *wiphy, const char *name, + enum nl80211_iftype type, u32 *flags, + struct vif_params *params) +{ + brcmf_err("enter - not supported yet\n"); + brcmf_dbg(INFO, "adding vif \"%s\" (type=%d)\n", name, type); + return ERR_PTR(-EOPNOTSUPP); +} + +/** + * brcmf_p2p_del_vif() - delete a P2P virtual interface. + * + * @wiphy: wiphy device of interface. + * @wdev: wireless device of interface. + * + * TODO: not yet supported. + */ +int brcmf_p2p_del_vif(struct wiphy *wiphy, struct wireless_dev *wdev) +{ + struct brcmf_cfg80211_vif *vif; + + vif = container_of(wdev, struct brcmf_cfg80211_vif, wdev); + if (wdev->netdev) + brcmf_dbg(INFO, "deleting vif \"%s\"\n", wdev->netdev->name); + else + brcmf_dbg(INFO, "deleting vif \"wdev-%u\"\n", + wdev->identifier); + brcmf_err("enter - not supported yet\n"); + return -EOPNOTSUPP; +} diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.h b/drivers/net/wireless/brcm80211/brcmfmac/p2p.h new file mode 100644 index 000000000000..f304adfcce60 --- /dev/null +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.h @@ -0,0 +1,114 @@ +/* + * Copyright (c) 2012 Broadcom Corporation + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY + * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION + * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN + * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ +#ifndef WL_CFGP2P_H_ +#define WL_CFGP2P_H_ + +#include + +struct brcmf_cfg80211_info; + +/* vendor ies max buffer length for probe response or beacon */ +#define VNDR_IES_MAX_BUF_LEN 1400 +/* normal vendor ies buffer length */ +#define VNDR_IES_BUF_LEN 512 + +/* Structure to hold all saved P2P and WPS IEs for a BSSCFG */ +/** + * enum p2p_bss_type - different type of BSS configurations. + * + * @P2PAPI_BSSCFG_PRIMARY: maps to driver's primary bsscfg. + * @P2PAPI_BSSCFG_DEVICE: maps to driver's P2P device discovery bsscfg. + * @P2PAPI_BSSCFG_CONNECTION: maps to driver's P2P connection bsscfg. + * @P2PAPI_BSSCFG_MAX: used for range checking. + */ +enum p2p_bss_type { + P2PAPI_BSSCFG_PRIMARY, /* maps to driver's primary bsscfg */ + P2PAPI_BSSCFG_DEVICE, /* maps to driver's P2P device discovery bsscfg */ + P2PAPI_BSSCFG_CONNECTION, /* maps to driver's P2P connection bsscfg */ + P2PAPI_BSSCFG_MAX +}; + +/** + * struct p2p_bss - peer-to-peer bss related information. + * + * @vif: virtual interface of this P2P bss. + * @private_data: TBD + */ +struct p2p_bss { + struct brcmf_cfg80211_vif *vif; + void *private_data; +}; + +/** + * enum brcmf_p2p_status - P2P specific dongle status. + * + * @BRCMF_P2P_STATUS_IF_ADD: peer-to-peer vif add sent to dongle. + * @BRCMF_P2P_STATUS_IF_DEL: NOT-USED? + * @BRCMF_P2P_STATUS_IF_DELETING: peer-to-peer vif delete sent to dongle. + * @BRCMF_P2P_STATUS_IF_CHANGING: peer-to-peer vif change sent to dongle. + * @BRCMF_P2P_STATUS_IF_CHANGED: peer-to-peer vif change completed on dongle. + * @BRCMF_P2P_STATUS_LISTEN_EXPIRED: listen duration expired. + * @BRCMF_P2P_STATUS_ACTION_TX_COMPLETED: action frame tx completed. + * @BRCMF_P2P_STATUS_ACTION_TX_NOACK: action frame tx not acked. + * @BRCMF_P2P_STATUS_GO_NEG_PHASE: P2P GO negotiation ongoing. + */ +enum brcmf_p2p_status { + BRCMF_P2P_STATUS_IF_ADD = 0, + BRCMF_P2P_STATUS_IF_DEL, + BRCMF_P2P_STATUS_IF_DELETING, + BRCMF_P2P_STATUS_IF_CHANGING, + BRCMF_P2P_STATUS_IF_CHANGED, + BRCMF_P2P_STATUS_LISTEN_EXPIRED, + BRCMF_P2P_STATUS_ACTION_TX_COMPLETED, + BRCMF_P2P_STATUS_ACTION_TX_NOACK, + BRCMF_P2P_STATUS_GO_NEG_PHASE +}; + +/** + * struct brcmf_p2p_info - p2p specific driver information. + * + * @cfg: driver private data for cfg80211 interface. + * @status: status of P2P (see enum brcmf_p2p_status). + * @dev_addr: P2P device address. + * @int_addr: P2P interface address. + * @bss_idx: informate for P2P bss types. + * @listen_timer: timer for @WL_P2P_DISC_ST_LISTEN discover state. + * @ssid: ssid for P2P GO. + * @listen_channel: channel for @WL_P2P_DISC_ST_LISTEN discover state. + */ +struct brcmf_p2p_info { + struct brcmf_cfg80211_info *cfg; + unsigned long status; + u8 dev_addr[ETH_ALEN]; + u8 int_addr[ETH_ALEN]; + struct p2p_bss bss_idx[P2PAPI_BSSCFG_MAX]; + struct timer_list listen_timer; + struct brcmf_ssid ssid; + u8 listen_channel; +}; + +void brcmf_p2p_attach(struct brcmf_cfg80211_info *cfg); +void brcmf_p2p_detach(struct brcmf_p2p_info *p2p); +struct wireless_dev *brcmf_p2p_add_vif(struct wiphy *wiphy, const char *name, + enum nl80211_iftype type, u32 *flags, + struct vif_params *params); +int brcmf_p2p_del_vif(struct wiphy *wiphy, struct wireless_dev *wdev); +int brcmf_p2p_start_device(struct wiphy *wiphy, struct wireless_dev *wdev); +void brcmf_p2p_stop_device(struct wiphy *wiphy, struct wireless_dev *wdev); +int brcmf_p2p_scan_prep(struct wiphy *wiphy, + struct cfg80211_scan_request *request); + +#endif /* WL_CFGP2P_H_ */ diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index d78f946c9e1c..5c4d1fca77d2 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -26,6 +26,7 @@ #include #include "dhd.h" #include "dhd_dbg.h" +#include "p2p.h" #include "wl_cfg80211.h" #include "fwil.h" @@ -41,12 +42,8 @@ #define BRCMF_PNO_SCAN_COMPLETE 1 #define BRCMF_PNO_SCAN_INCOMPLETE 0 -#define BRCMF_IFACE_MAX_CNT 2 +#define BRCMF_IFACE_MAX_CNT 3 -#define TLV_LEN_OFF 1 /* length offset */ -#define TLV_HDR_LEN 2 /* header length */ -#define TLV_BODY_OFF 2 /* body offset */ -#define TLV_OUI_LEN 3 /* oui id length */ #define WPA_OUI "\x00\x50\xF2" /* WPA OUI */ #define WPA_OUI_TYPE 1 #define RSN_OUI "\x00\x0F\xAC" /* RSN OUI */ @@ -76,9 +73,7 @@ #define VNDR_IE_PKTFLAG_OFFSET 8 #define VNDR_IE_VSIE_OFFSET 12 #define VNDR_IE_HDR_SIZE 12 -#define VNDR_IE_BEACON_FLAG 0x1 -#define VNDR_IE_PRBRSP_FLAG 0x2 -#define MAX_VNDR_IE_NUMBER 5 +#define VNDR_IE_PARSE_LIMIT 5 #define DOT11_MGMT_HDR_LEN 24 /* d11 management header len */ #define DOT11_BCN_PRB_FIXED_LEN 12 /* beacon/probe fixed length */ @@ -271,13 +266,6 @@ static const u32 __wl_cipher_suites[] = { WLAN_CIPHER_SUITE_AES_CMAC, }; -/* tag_ID/length/value_buffer tuple */ -struct brcmf_tlv { - u8 id; - u8 len; - u8 data[1]; -}; - /* Vendor specific ie. id = 221, oui and type defines exact ie */ struct brcmf_vs_tlv { u8 id; @@ -294,7 +282,7 @@ struct parsed_vndr_ie_info { struct parsed_vndr_ies { u32 count; - struct parsed_vndr_ie_info ie_info[MAX_VNDR_IE_NUMBER]; + struct parsed_vndr_ie_info ie_info[VNDR_IE_PARSE_LIMIT]; }; /* Quarter dBm units to mW @@ -381,7 +369,7 @@ static u8 brcmf_mw_to_qdbm(u16 mw) return qdbm; } -static u16 channel_to_chanspec(struct ieee80211_channel *ch) +u16 channel_to_chanspec(struct ieee80211_channel *ch) { u16 chanspec; @@ -431,6 +419,55 @@ send_key_to_dongle(struct net_device *ndev, struct brcmf_wsec_key *key) return err; } +static struct wireless_dev *brcmf_cfg80211_add_iface(struct wiphy *wiphy, + const char *name, + enum nl80211_iftype type, + u32 *flags, + struct vif_params *params) +{ + brcmf_dbg(TRACE, "enter: %s type %d\n", name, type); + switch (type) { + case NL80211_IFTYPE_ADHOC: + case NL80211_IFTYPE_STATION: + case NL80211_IFTYPE_AP: + case NL80211_IFTYPE_AP_VLAN: + case NL80211_IFTYPE_WDS: + case NL80211_IFTYPE_MONITOR: + case NL80211_IFTYPE_MESH_POINT: + return ERR_PTR(-EOPNOTSUPP); + case NL80211_IFTYPE_P2P_CLIENT: + case NL80211_IFTYPE_P2P_GO: + return brcmf_p2p_add_vif(wiphy, name, type, flags, params); + case NL80211_IFTYPE_UNSPECIFIED: + case NL80211_IFTYPE_P2P_DEVICE: + default: + return ERR_PTR(-EINVAL); + } +} + +static +int brcmf_cfg80211_del_iface(struct wiphy *wiphy, struct wireless_dev *wdev) +{ + switch (wdev->iftype) { + case NL80211_IFTYPE_ADHOC: + case NL80211_IFTYPE_STATION: + case NL80211_IFTYPE_AP: + case NL80211_IFTYPE_AP_VLAN: + case NL80211_IFTYPE_WDS: + case NL80211_IFTYPE_MONITOR: + case NL80211_IFTYPE_MESH_POINT: + return -EOPNOTSUPP; + case NL80211_IFTYPE_P2P_CLIENT: + case NL80211_IFTYPE_P2P_GO: + return brcmf_p2p_del_vif(wiphy, wdev); + case NL80211_IFTYPE_UNSPECIFIED: + case NL80211_IFTYPE_P2P_DEVICE: + default: + return -EINVAL; + } + return -EOPNOTSUPP; +} + static s32 brcmf_cfg80211_change_iface(struct wiphy *wiphy, struct net_device *ndev, enum nl80211_iftype type, u32 *flags, @@ -696,11 +733,12 @@ brcmf_do_escan(struct brcmf_cfg80211_info *cfg, struct wiphy *wiphy, s32 err; u32 passive_scan; struct brcmf_scan_results *results; + struct escan_info *escan = &cfg->escan_info; brcmf_dbg(SCAN, "Enter\n"); - cfg->escan_info.ndev = ndev; - cfg->escan_info.wiphy = wiphy; - cfg->escan_info.escan_state = WL_ESCAN_STATE_SCANNING; + escan->ndev = ndev; + escan->wiphy = wiphy; + escan->escan_state = WL_ESCAN_STATE_SCANNING; passive_scan = cfg->active_scan ? 0 : 1; err = brcmf_fil_cmd_int_set(netdev_priv(ndev), BRCMF_C_SET_PASSIVE_SCAN, passive_scan); @@ -714,7 +752,7 @@ brcmf_do_escan(struct brcmf_cfg80211_info *cfg, struct wiphy *wiphy, results->count = 0; results->buflen = WL_ESCAN_RESULTS_FIXED_SIZE; - err = brcmf_run_escan(cfg, ndev, request, WL_ESCAN_ACTION_START); + err = escan->run(cfg, ndev, request, WL_ESCAN_ACTION_START); if (err) brcmf_set_mpc(ndev, 1); return err; @@ -769,6 +807,11 @@ brcmf_cfg80211_escan(struct wiphy *wiphy, struct net_device *ndev, cfg->scan_request = request; set_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status); if (escan_req) { + cfg->escan_info.run = brcmf_run_escan; + err = brcmf_p2p_scan_prep(wiphy, request); + if (err) + goto scan_out; + err = brcmf_do_escan(cfg, wiphy, ndev, request); if (err) goto scan_out; @@ -2186,7 +2229,7 @@ static bool brcmf_is_ibssmode(struct brcmf_cfg80211_vif *vif) * triples, returning a pointer to the substring whose first element * matches tag */ -static struct brcmf_tlv *brcmf_parse_tlvs(void *buf, int buflen, uint key) +struct brcmf_tlv *brcmf_parse_tlvs(void *buf, int buflen, uint key) { struct brcmf_tlv *elt; int totlen; @@ -3227,7 +3270,7 @@ brcmf_parse_vndr_ies(const u8 *vndr_ie_buf, u32 vndr_ie_len, parsed_info->vndrie.oui[2], parsed_info->vndrie.oui_type); - if (vndr_ies->count >= MAX_VNDR_IE_NUMBER) + if (vndr_ies->count >= VNDR_IE_PARSE_LIMIT) break; next: remaining_len -= (ie->len + TLV_HDR_LEN); @@ -3261,7 +3304,6 @@ brcmf_vndr_ie(u8 *iebuf, s32 pktflag, u8 *ie_ptr, u32 ie_len, s8 *add_del_cmd) return ie_len + VNDR_IE_HDR_SIZE; } -static s32 brcmf_vif_set_mgmt_ie(struct brcmf_cfg80211_vif *vif, s32 pktflag, const u8 *vndr_ie_buf, u32 vndr_ie_len) { @@ -3295,12 +3337,12 @@ s32 brcmf_vif_set_mgmt_ie(struct brcmf_cfg80211_vif *vif, s32 pktflag, curr_ie_buf = iovar_ie_buf; if (ifp->vif->mode == WL_MODE_AP) { switch (pktflag) { - case VNDR_IE_PRBRSP_FLAG: + case BRCMF_VNDR_IE_PRBRSP_FLAG: mgmt_ie_buf = saved_ie->probe_res_ie; mgmt_ie_len = &saved_ie->probe_res_ie_len; mgmt_ie_buf_len = sizeof(saved_ie->probe_res_ie); break; - case VNDR_IE_BEACON_FLAG: + case BRCMF_VNDR_IE_BEACON_FLAG: mgmt_ie_buf = saved_ie->beacon_ie; mgmt_ie_len = &saved_ie->beacon_ie_len; mgmt_ie_buf_len = sizeof(saved_ie->beacon_ie); @@ -3311,9 +3353,17 @@ s32 brcmf_vif_set_mgmt_ie(struct brcmf_cfg80211_vif *vif, s32 pktflag, goto exit; } } else { - err = -EPERM; - brcmf_err("not suitable type\n"); - goto exit; + switch (pktflag) { + case BRCMF_VNDR_IE_PRBREQ_FLAG: + mgmt_ie_buf = saved_ie->probe_req_ie; + mgmt_ie_len = &saved_ie->probe_req_ie_len; + mgmt_ie_buf_len = sizeof(saved_ie->probe_req_ie); + break; + default: + err = -EPERM; + brcmf_err("not suitable type\n"); + goto exit; + } } if (vndr_ie_len > mgmt_ie_buf_len) { @@ -3508,7 +3558,7 @@ brcmf_cfg80211_start_ap(struct wiphy *wiphy, struct net_device *ndev, } /* Set Beacon IEs to FW */ err = brcmf_vif_set_mgmt_ie(ndev_to_vif(ndev), - VNDR_IE_BEACON_FLAG, + BRCMF_VNDR_IE_BEACON_FLAG, settings->beacon.tail, settings->beacon.tail_len); if (err) @@ -3518,7 +3568,7 @@ brcmf_cfg80211_start_ap(struct wiphy *wiphy, struct net_device *ndev, /* Set Probe Response IEs to FW */ err = brcmf_vif_set_mgmt_ie(ndev_to_vif(ndev), - VNDR_IE_PRBRSP_FLAG, + BRCMF_VNDR_IE_PRBRSP_FLAG, settings->beacon.proberesp_ies, settings->beacon.proberesp_ies_len); if (err) @@ -3625,6 +3675,8 @@ brcmf_cfg80211_del_station(struct wiphy *wiphy, struct net_device *ndev, } static struct cfg80211_ops wl_cfg80211_ops = { + .add_virtual_intf = brcmf_cfg80211_add_iface, + .del_virtual_intf = brcmf_cfg80211_del_iface, .change_virtual_intf = brcmf_cfg80211_change_iface, .scan = brcmf_cfg80211_scan, .set_wiphy_params = brcmf_cfg80211_set_wiphy_params, @@ -3656,20 +3708,30 @@ static struct cfg80211_ops wl_cfg80211_ops = { #endif }; -static s32 brcmf_mode_to_nl80211_iftype(s32 mode) +static s32 brcmf_nl80211_iftype_to_mode(enum nl80211_iftype type) { - s32 err = 0; - - switch (mode) { - case WL_MODE_BSS: - return NL80211_IFTYPE_STATION; - case WL_MODE_IBSS: - return NL80211_IFTYPE_ADHOC; + switch (type) { + case NL80211_IFTYPE_AP_VLAN: + case NL80211_IFTYPE_WDS: + case NL80211_IFTYPE_MONITOR: + case NL80211_IFTYPE_MESH_POINT: + return -ENOTSUPP; + case NL80211_IFTYPE_ADHOC: + return WL_MODE_IBSS; + case NL80211_IFTYPE_STATION: + case NL80211_IFTYPE_P2P_CLIENT: + return WL_MODE_BSS; + case NL80211_IFTYPE_AP: + case NL80211_IFTYPE_P2P_GO: + return WL_MODE_AP; + case NL80211_IFTYPE_P2P_DEVICE: + return WL_MODE_P2P; + case NL80211_IFTYPE_UNSPECIFIED: default: - return NL80211_IFTYPE_UNSPECIFIED; + break; } - return err; + return -EINVAL; } static void brcmf_wiphy_pno_params(struct wiphy *wiphy) @@ -3681,6 +3743,28 @@ static void brcmf_wiphy_pno_params(struct wiphy *wiphy) wiphy->flags |= WIPHY_FLAG_SUPPORTS_SCHED_SCAN; } +static const struct ieee80211_iface_limit brcmf_iface_limits[] = { + { + .max = 1, + .types = BIT(NL80211_IFTYPE_STATION) | + BIT(NL80211_IFTYPE_ADHOC) | + BIT(NL80211_IFTYPE_AP) + }, + { + .max = 1, + .types = BIT(NL80211_IFTYPE_P2P_CLIENT) | + BIT(NL80211_IFTYPE_P2P_GO) + }, +}; +static const struct ieee80211_iface_combination brcmf_iface_combos[] = { + { + .max_interfaces = BRCMF_IFACE_MAX_CNT - 1, + .num_different_channels = 1, /* no multi-channel for now */ + .n_limits = ARRAY_SIZE(brcmf_iface_limits), + .limits = brcmf_iface_limits + } +}; + static struct wiphy *brcmf_setup_wiphy(struct device *phydev) { struct wiphy *wiphy; @@ -3693,10 +3777,15 @@ static struct wiphy *brcmf_setup_wiphy(struct device *phydev) } set_wiphy_dev(wiphy, phydev); wiphy->max_scan_ssids = WL_NUM_SCAN_MAX; + wiphy->max_scan_ie_len = BRCMF_SCAN_IE_LEN_MAX; wiphy->max_num_pmkids = WL_NUM_PMKIDS_MAX; wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_ADHOC) | - BIT(NL80211_IFTYPE_AP); + BIT(NL80211_IFTYPE_AP) | + BIT(NL80211_IFTYPE_P2P_CLIENT) | + BIT(NL80211_IFTYPE_P2P_GO); + wiphy->iface_combinations = brcmf_iface_combos; + wiphy->n_iface_combinations = ARRAY_SIZE(brcmf_iface_combos); wiphy->bands[IEEE80211_BAND_2GHZ] = &__wl_band_2ghz; wiphy->bands[IEEE80211_BAND_5GHZ] = &__wl_band_5ghz_a; /* Set * it as 11a by default. @@ -3722,23 +3811,25 @@ static struct wiphy *brcmf_setup_wiphy(struct device *phydev) return wiphy; } -static struct brcmf_cfg80211_vif *brcmf_alloc_vif(struct brcmf_cfg80211_info *cfg, struct net_device *netdev, - s32 mode, bool pm_block) + enum nl80211_iftype type, + bool pm_block) { struct brcmf_cfg80211_vif *vif; if (cfg->vif_cnt == BRCMF_IFACE_MAX_CNT) return ERR_PTR(-ENOSPC); + brcmf_dbg(TRACE, "allocating virtual interface (size=%d)\n", + sizeof(*vif)); vif = kzalloc(sizeof(*vif), GFP_KERNEL); if (!vif) return ERR_PTR(-ENOMEM); vif->wdev.wiphy = cfg->wiphy; vif->wdev.netdev = netdev; - vif->wdev.iftype = brcmf_mode_to_nl80211_iftype(mode); + vif->wdev.iftype = type; if (netdev) { vif->ifp = netdev_priv(netdev); @@ -3746,7 +3837,7 @@ struct brcmf_cfg80211_vif *brcmf_alloc_vif(struct brcmf_cfg80211_info *cfg, SET_NETDEV_DEV(netdev, wiphy_dev(cfg->wiphy)); } - vif->mode = mode; + vif->mode = brcmf_nl80211_iftype_to_mode(type); vif->pm_block = pm_block; vif->roam_off = -1; @@ -3757,7 +3848,7 @@ struct brcmf_cfg80211_vif *brcmf_alloc_vif(struct brcmf_cfg80211_info *cfg, return vif; } -static void brcmf_free_vif(struct brcmf_cfg80211_vif *vif) +void brcmf_free_vif(struct brcmf_cfg80211_vif *vif) { struct brcmf_cfg80211_info *cfg; struct wiphy *wiphy; @@ -4226,7 +4317,7 @@ struct brcmf_cfg80211_info *brcmf_cfg80211_attach(struct brcmf_pub *drvr, cfg->pub = drvr; INIT_LIST_HEAD(&cfg->vif_list); - vif = brcmf_alloc_vif(cfg, ndev, WL_MODE_BSS, false); + vif = brcmf_alloc_vif(cfg, ndev, NL80211_IFTYPE_STATION, false); if (IS_ERR(vif)) { wiphy_free(wiphy); return NULL; @@ -4237,6 +4328,7 @@ struct brcmf_cfg80211_info *brcmf_cfg80211_attach(struct brcmf_pub *drvr, brcmf_err("Failed to init iwm_priv (%d)\n", err); goto cfg80211_attach_out; } + brcmf_p2p_attach(cfg); ifp->vif = vif; return cfg; @@ -4482,3 +4574,14 @@ s32 brcmf_cfg80211_down(struct net_device *ndev) return err; } +u32 wl_get_vif_state_all(struct brcmf_cfg80211_info *cfg, unsigned long state) +{ + struct brcmf_cfg80211_vif *vif; + bool result = 0; + + list_for_each_entry(vif, &cfg->vif_list, list) { + if (test_bit(state, &vif->sme_state)) + result++; + } + return result; +} diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h index e4d9cc7a8e63..014a463a86b9 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h @@ -41,6 +41,38 @@ #define WL_AUTH_SHARED_KEY 1 /* d11 shared authentication */ #define IE_MAX_LEN 512 +/* IE TLV processing */ +#define TLV_LEN_OFF 1 /* length offset */ +#define TLV_HDR_LEN 2 /* header length */ +#define TLV_BODY_OFF 2 /* body offset */ +#define TLV_OUI_LEN 3 /* oui id length */ + +/* 802.11 Mgmt Packet flags */ +#define BRCMF_VNDR_IE_BEACON_FLAG 0x1 +#define BRCMF_VNDR_IE_PRBRSP_FLAG 0x2 +#define BRCMF_VNDR_IE_ASSOCRSP_FLAG 0x4 +#define BRCMF_VNDR_IE_AUTHRSP_FLAG 0x8 +#define BRCMF_VNDR_IE_PRBREQ_FLAG 0x10 +#define BRCMF_VNDR_IE_ASSOCREQ_FLAG 0x20 +/* vendor IE in IW advertisement protocol ID field */ +#define BRCMF_VNDR_IE_IWAPID_FLAG 0x40 +/* allow custom IE id */ +#define BRCMF_VNDR_IE_CUSTOM_FLAG 0x100 + +/* P2P Action Frames flags (spec ordered) */ +#define BRCMF_VNDR_IE_GONREQ_FLAG 0x001000 +#define BRCMF_VNDR_IE_GONRSP_FLAG 0x002000 +#define BRCMF_VNDR_IE_GONCFM_FLAG 0x004000 +#define BRCMF_VNDR_IE_INVREQ_FLAG 0x008000 +#define BRCMF_VNDR_IE_INVRSP_FLAG 0x010000 +#define BRCMF_VNDR_IE_DISREQ_FLAG 0x020000 +#define BRCMF_VNDR_IE_DISRSP_FLAG 0x040000 +#define BRCMF_VNDR_IE_PRDREQ_FLAG 0x080000 +#define BRCMF_VNDR_IE_PRDRSP_FLAG 0x100000 + +#define BRCMF_VNDR_IE_P2PAF_SHIFT 12 + + /** * enum brcmf_scan_status - dongle scan status * @@ -52,11 +84,19 @@ enum brcmf_scan_status { BRCMF_SCAN_STATUS_ABORT, }; -/* wi-fi mode */ +/** + * enum wl_mode - driver mode of virtual interface. + * + * @WL_MODE_BSS: connects to BSS. + * @WL_MODE_IBSS: operate as ad-hoc. + * @WL_MODE_AP: operate as access-point. + * @WL_MODE_P2P: provide P2P discovery. + */ enum wl_mode { WL_MODE_BSS, WL_MODE_IBSS, - WL_MODE_AP + WL_MODE_AP, + WL_MODE_P2P }; /* dongle configuration */ @@ -122,14 +162,18 @@ enum brcmf_vif_status { /** * struct vif_saved_ie - holds saved IEs for a virtual interface. * + * @probe_req_ie: IE info for probe request. * @probe_res_ie: IE info for probe response. * @beacon_ie: IE info for beacon frame. + * @probe_req_ie_len: IE info length for probe request. * @probe_res_ie_len: IE info length for probe response. * @beacon_ie_len: IE info length for beacon frame. */ struct vif_saved_ie { + u8 probe_req_ie[VNDR_IES_BUF_LEN]; u8 probe_res_ie[IE_MAX_LEN]; u8 beacon_ie[IE_MAX_LEN]; + u32 probe_req_ie_len; u32 probe_res_ie_len; u32 beacon_ie_len; }; @@ -189,6 +233,9 @@ struct escan_info { u8 escan_buf[WL_ESCAN_BUF_SIZE]; struct wiphy *wiphy; struct net_device *ndev; + s32 (*run)(struct brcmf_cfg80211_info *cfg, + struct net_device *ndev, + struct cfg80211_scan_request *request, u16 action); }; /** @@ -277,6 +324,7 @@ struct brcmf_pno_scanresults_le { * * @wiphy: wiphy object for cfg80211 interface. * @conf: dongle configuration. + * @p2p: peer-to-peer specific information. * @scan_request: cfg80211 scan request object. * @usr_sync: mainly for dongle up/down synchronization. * @bss_list: bss_list holding scanned ap information. @@ -308,6 +356,7 @@ struct brcmf_pno_scanresults_le { struct brcmf_cfg80211_info { struct wiphy *wiphy; struct brcmf_cfg80211_conf *conf; + struct brcmf_p2p_info p2p; struct cfg80211_scan_request *scan_request; struct mutex usr_sync; struct brcmf_scan_results *bss_list; @@ -337,6 +386,19 @@ struct brcmf_cfg80211_info { u8 vif_cnt; }; +/** + * struct brcmf_tlv - tag_ID/length/value_buffer tuple. + * + * @id: tag identifier. + * @len: number of bytes in value buffer. + * @data: value buffer. + */ +struct brcmf_tlv { + u8 id; + u8 len; + u8 data[1]; +}; + static inline struct wiphy *cfg_to_wiphy(struct brcmf_cfg80211_info *cfg) { return cfg->wiphy; @@ -389,4 +451,16 @@ void brcmf_cfg80211_detach(struct brcmf_cfg80211_info *cfg); s32 brcmf_cfg80211_up(struct net_device *ndev); s32 brcmf_cfg80211_down(struct net_device *ndev); +struct brcmf_cfg80211_vif *brcmf_alloc_vif(struct brcmf_cfg80211_info *cfg, + struct net_device *netdev, + enum nl80211_iftype type, + bool pm_block); +void brcmf_free_vif(struct brcmf_cfg80211_vif *vif); + +s32 brcmf_vif_set_mgmt_ie(struct brcmf_cfg80211_vif *vif, s32 pktflag, + const u8 *vndr_ie_buf, u32 vndr_ie_len); +struct brcmf_tlv *brcmf_parse_tlvs(void *buf, int buflen, uint key); +u16 channel_to_chanspec(struct ieee80211_channel *ch); +u32 wl_get_vif_state_all(struct brcmf_cfg80211_info *cfg, unsigned long state); + #endif /* _wl_cfg80211_h_ */ From d3c0b63396442d564ceb4db0dcc51e70918b9c93 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Fri, 8 Feb 2013 15:53:37 +0100 Subject: [PATCH 084/209] brcmfmac: add support for creating P2P client/GO interface This patch allow the creation of P2P client and group owner virtual interfaces in the driver. Reviewed-by: Hante Meuleman Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Franky (Zhenhui) Lin Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/dhd.h | 1 + .../wireless/brcm80211/brcmfmac/fwil_types.h | 42 ++++++ drivers/net/wireless/brcm80211/brcmfmac/p2p.c | 112 +++++++++++++++- .../wireless/brcm80211/brcmfmac/wl_cfg80211.c | 123 ++++++++++++++++-- .../wireless/brcm80211/brcmfmac/wl_cfg80211.h | 26 +++- 5 files changed, 289 insertions(+), 15 deletions(-) create mode 100644 drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h index 7c78131d0a25..b61254dd42c0 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h @@ -72,6 +72,7 @@ #define BRCMF_C_SET_WSEC 134 #define BRCMF_C_GET_PHY_NOISE 135 #define BRCMF_C_GET_BSS_INFO 136 +#define BRCMF_C_SET_SCB_TIMEOUT 158 #define BRCMF_C_GET_PHYLIST 180 #define BRCMF_C_SET_SCAN_CHANNEL_TIME 185 #define BRCMF_C_SET_SCAN_UNASSOC_TIME 187 diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h b/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h new file mode 100644 index 000000000000..d21d9b2201d8 --- /dev/null +++ b/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h @@ -0,0 +1,42 @@ +/* + * Copyright (c) 2012 Broadcom Corporation + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY + * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION + * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN + * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + + +#ifndef FWIL_TYPES_H_ +#define FWIL_TYPES_H_ + +#include + +enum brcmf_fil_p2p_if_types { + BRCMF_FIL_P2P_IF_CLIENT, + BRCMF_FIL_P2P_IF_GO, + BRCMF_FIL_P2P_IF_DYNBCN_GO, + BRCMF_FIL_P2P_IF_DEV, +}; + +struct brcmf_fil_p2p_if_le { + u8 addr[ETH_ALEN]; + enum brcmf_fil_p2p_if_types type; + __le16 chspec; +}; + +struct brcmf_fil_chan_info_le { + __le32 hw_channel; + __le32 target_channel; + __le32 scan_channel; +}; + +#endif /* FWIL_TYPES_H_ */ diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c index 22d9de81e08f..25c6b7de0594 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c @@ -23,6 +23,7 @@ #include #include #include "fwil.h" +#include "fwil_types.h" #include "p2p.h" #include "wl_cfg80211.h" @@ -45,6 +46,8 @@ #define SOCIAL_CHAN_CNT 3 #define AF_PEER_SEARCH_CNT 2 +#define BRCMF_SCB_TIMEOUT_VALUE 20 + /** * struct brcmf_p2p_disc_st_le - set discovery state in firmware. * @@ -285,7 +288,7 @@ static s32 brcmf_p2p_init_discovery(struct brcmf_p2p_info *p2p) } /* create a vif for it */ - vif = brcmf_alloc_vif(p2p->cfg, NULL, NL80211_IFTYPE_P2P_DEVICE, false); + vif = brcmf_alloc_vif(p2p->cfg, NL80211_IFTYPE_P2P_DEVICE, false); if (IS_ERR(vif)) { brcmf_err("could not create discovery vif\n"); kfree(ifp); @@ -691,6 +694,43 @@ void brcmf_p2p_detach(struct brcmf_p2p_info *p2p) memset(p2p, 0, sizeof(*p2p)); } +static int brcmf_p2p_request_p2p_if(struct brcmf_if *ifp, u8 ea[ETH_ALEN], + enum brcmf_fil_p2p_if_types iftype) +{ + struct brcmf_fil_p2p_if_le if_request; + struct brcmf_fil_chan_info_le ci; + u16 chanspec = 11 & WL_CHANSPEC_CHAN_MASK; + int err; + + /* we need a default channel */ + err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_CHANNEL, &ci, sizeof(ci)); + if (!err) { + chanspec = le32_to_cpu(ci.hw_channel) & WL_CHANSPEC_CHAN_MASK; + if (chanspec < CH_MAX_2G_CHANNEL) + chanspec |= WL_CHANSPEC_BAND_2G; + else + chanspec |= WL_CHANSPEC_BAND_5G; + } + chanspec |= WL_CHANSPEC_BW_20 | WL_CHANSPEC_CTL_SB_NONE; + + /* fill the firmware request */ + memcpy(if_request.addr, ea, ETH_ALEN); + if_request.type = iftype; + if_request.chspec = cpu_to_le16(chanspec); + + err = brcmf_fil_iovar_data_set(ifp, "p2p_ifadd", &if_request, + sizeof(if_request)); + if (err) + return err; + + if (iftype == BRCMF_FIL_P2P_IF_GO) { + /* set station timeout for p2p */ + err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_SCB_TIMEOUT, + BRCMF_SCB_TIMEOUT_VALUE); + } + return err; +} + /** * brcmf_p2p_add_vif() - create a new P2P virtual interface. * @@ -699,16 +739,67 @@ void brcmf_p2p_detach(struct brcmf_p2p_info *p2p) * @type: nl80211 interface type. * @flags: TBD * @params: TBD - * - * TODO: not yet supported. */ struct wireless_dev *brcmf_p2p_add_vif(struct wiphy *wiphy, const char *name, enum nl80211_iftype type, u32 *flags, struct vif_params *params) { - brcmf_err("enter - not supported yet\n"); + struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); + struct brcmf_if *ifp = netdev_priv(cfg_to_ndev(cfg)); + struct brcmf_cfg80211_vif *vif; + enum brcmf_fil_p2p_if_types iftype; + enum wl_mode mode; + int err; + + if (brcmf_cfg80211_vif_event_armed(cfg)) + return ERR_PTR(-EBUSY); + brcmf_dbg(INFO, "adding vif \"%s\" (type=%d)\n", name, type); - return ERR_PTR(-EOPNOTSUPP); + + switch (type) { + case NL80211_IFTYPE_P2P_CLIENT: + iftype = BRCMF_FIL_P2P_IF_CLIENT; + mode = WL_MODE_BSS; + break; + case NL80211_IFTYPE_P2P_GO: + iftype = BRCMF_FIL_P2P_IF_GO; + mode = WL_MODE_AP; + break; + default: + return ERR_PTR(-EOPNOTSUPP); + } + + vif = brcmf_alloc_vif(cfg, type, false); + brcmf_cfg80211_arm_vif_event(cfg, vif); + + err = brcmf_p2p_request_p2p_if(ifp, cfg->p2p.int_addr, iftype); + if (err) + goto fail; + + /* wait for firmware event */ + err = brcmf_cfg80211_wait_vif_event_timeout(cfg, BRCMF_E_IF_ADD, + msecs_to_jiffies(1500)); + brcmf_cfg80211_arm_vif_event(cfg, NULL); + if (!err) { + brcmf_err("timeout occurred\n"); + err = -EIO; + goto fail; + } + + /* interface created in firmware */ + ifp = vif->ifp; + if (!ifp) { + brcmf_err("no if pointer provided\n"); + err = -ENOENT; + } + + strncpy(ifp->ndev->name, name, sizeof(ifp->ndev->name) - 1); + brcmf_cfg80211_vif_complete(cfg); + return &ifp->vif->wdev; + +fail: + brcmf_free_vif(vif); + return ERR_PTR(err); } /** @@ -721,9 +812,20 @@ struct wireless_dev *brcmf_p2p_add_vif(struct wiphy *wiphy, const char *name, */ int brcmf_p2p_del_vif(struct wiphy *wiphy, struct wireless_dev *wdev) { + struct brcmf_cfg80211_info *cfg = wiphy_priv(wiphy); struct brcmf_cfg80211_vif *vif; + int err; vif = container_of(wdev, struct brcmf_cfg80211_vif, wdev); + + if (brcmf_cfg80211_vif_event_armed(cfg)) + return -EBUSY; + + brcmf_cfg80211_arm_vif_event(cfg, vif); + /* wait for firmware event */ + err = brcmf_cfg80211_wait_vif_event_timeout(cfg, BRCMF_E_IF_DEL, + msecs_to_jiffies(1500)); + brcmf_cfg80211_arm_vif_event(cfg, NULL); if (wdev->netdev) brcmf_dbg(INFO, "deleting vif \"%s\"\n", wdev->netdev->name); else diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 5c4d1fca77d2..6b4e877123d6 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -3812,7 +3812,6 @@ static struct wiphy *brcmf_setup_wiphy(struct device *phydev) } struct brcmf_cfg80211_vif *brcmf_alloc_vif(struct brcmf_cfg80211_info *cfg, - struct net_device *netdev, enum nl80211_iftype type, bool pm_block) { @@ -3828,15 +3827,8 @@ struct brcmf_cfg80211_vif *brcmf_alloc_vif(struct brcmf_cfg80211_info *cfg, return ERR_PTR(-ENOMEM); vif->wdev.wiphy = cfg->wiphy; - vif->wdev.netdev = netdev; vif->wdev.iftype = type; - if (netdev) { - vif->ifp = netdev_priv(netdev); - netdev->ieee80211_ptr = &vif->wdev; - SET_NETDEV_DEV(netdev, wiphy_dev(cfg->wiphy)); - } - vif->mode = brcmf_nl80211_iftype_to_mode(type); vif->pm_block = pm_block; vif->roam_off = -1; @@ -4195,6 +4187,57 @@ brcmf_notify_mic_status(struct brcmf_if *ifp, return 0; } +static s32 brcmf_notify_vif_event(struct brcmf_if *ifp, + const struct brcmf_event_msg *e, void *data) +{ + struct brcmf_cfg80211_info *cfg = ifp->drvr->config; + struct brcmf_if_event *ifevent = (struct brcmf_if_event *)data; + struct brcmf_cfg80211_vif_event *event = &cfg->vif_event; + struct brcmf_cfg80211_vif *vif; + + brcmf_dbg(TRACE, "Enter: action %u flags %u ifidx %u bsscfg %u\n", + ifevent->action, ifevent->flags, ifevent->ifidx, + ifevent->bssidx); + + + mutex_lock(&event->vif_event_lock); + event->action = ifevent->action; + vif = event->vif; + + switch (ifevent->action) { + case BRCMF_E_IF_ADD: + /* waiting process may have timed out */ + if (!cfg->vif_event.vif) + return -EBADF; + + ifp->vif = vif; + vif->ifp = ifp; + vif->wdev.netdev = ifp->ndev; + ifp->ndev->ieee80211_ptr = &vif->wdev; + SET_NETDEV_DEV(ifp->ndev, wiphy_dev(cfg->wiphy)); + mutex_unlock(&event->vif_event_lock); + wake_up(&event->vif_wq); + + /* waiting process need to set the netdev name */ + wait_for_completion(&event->vif_complete); + return brcmf_net_attach(ifp); + + case BRCMF_E_IF_DEL: + ifp->vif = NULL; + brcmf_free_vif(vif); + mutex_unlock(&event->vif_event_lock); + /* event may not be upon user request */ + if (brcmf_cfg80211_vif_event_armed(cfg)) + wake_up(&event->vif_wq); + return 0; + + default: + mutex_unlock(&event->vif_event_lock); + break; + } + return -EINVAL; +} + static void brcmf_init_conf(struct brcmf_cfg80211_conf *conf) { conf->frag_threshold = (u32)-1; @@ -4226,6 +4269,8 @@ static void brcmf_register_event_handlers(struct brcmf_cfg80211_info *cfg) brcmf_notify_connect_status); brcmf_fweh_register(cfg->pub, BRCMF_E_PFN_NET_FOUND, brcmf_notify_sched_scan_results); + brcmf_fweh_register(cfg->pub, BRCMF_E_IF, + brcmf_notify_vif_event); } static void brcmf_deinit_priv_mem(struct brcmf_cfg80211_info *cfg) @@ -4292,6 +4337,13 @@ static void wl_deinit_priv(struct brcmf_cfg80211_info *cfg) brcmf_deinit_priv_mem(cfg); } +static void init_vif_event(struct brcmf_cfg80211_vif_event *event) +{ + init_waitqueue_head(&event->vif_wq); + init_completion(&event->vif_complete); + mutex_init(&event->vif_event_lock); +} + struct brcmf_cfg80211_info *brcmf_cfg80211_attach(struct brcmf_pub *drvr, struct device *busdev) { @@ -4315,14 +4367,20 @@ struct brcmf_cfg80211_info *brcmf_cfg80211_attach(struct brcmf_pub *drvr, cfg = wiphy_priv(wiphy); cfg->wiphy = wiphy; cfg->pub = drvr; + init_vif_event(&cfg->vif_event); INIT_LIST_HEAD(&cfg->vif_list); - vif = brcmf_alloc_vif(cfg, ndev, NL80211_IFTYPE_STATION, false); + vif = brcmf_alloc_vif(cfg, NL80211_IFTYPE_STATION, false); if (IS_ERR(vif)) { wiphy_free(wiphy); return NULL; } + vif->ifp = ifp; + vif->wdev.netdev = ndev; + ndev->ieee80211_ptr = &vif->wdev; + SET_NETDEV_DEV(ndev, wiphy_dev(cfg->wiphy)); + err = wl_init_priv(cfg); if (err) { brcmf_err("Failed to init iwm_priv (%d)\n", err); @@ -4585,3 +4643,50 @@ u32 wl_get_vif_state_all(struct brcmf_cfg80211_info *cfg, unsigned long state) } return result; } + +static inline bool vif_event_equals(struct brcmf_cfg80211_vif_event *event, + u8 action) +{ + u8 evt_action; + + mutex_lock(&event->vif_event_lock); + evt_action = event->action; + mutex_unlock(&event->vif_event_lock); + return evt_action == action; +} + +void brcmf_cfg80211_arm_vif_event(struct brcmf_cfg80211_info *cfg, + struct brcmf_cfg80211_vif *vif) +{ + struct brcmf_cfg80211_vif_event *event = &cfg->vif_event; + + mutex_lock(&event->vif_event_lock); + event->vif = vif; + event->action = 0; + mutex_unlock(&event->vif_event_lock); +} + +bool brcmf_cfg80211_vif_event_armed(struct brcmf_cfg80211_info *cfg) +{ + struct brcmf_cfg80211_vif_event *event = &cfg->vif_event; + bool armed; + + mutex_lock(&event->vif_event_lock); + armed = event->vif != NULL; + mutex_unlock(&event->vif_event_lock); + + return armed; +} +int brcmf_cfg80211_wait_vif_event_timeout(struct brcmf_cfg80211_info *cfg, + u8 action, ulong timeout) +{ + struct brcmf_cfg80211_vif_event *event = &cfg->vif_event; + + return wait_event_timeout(event->vif_wq, + vif_event_equals(event, action), timeout); +} + +void brcmf_cfg80211_vif_complete(struct brcmf_cfg80211_info *cfg) +{ + complete(&cfg->vif_event.vif_complete); +} diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h index 014a463a86b9..691f613d99d2 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h @@ -319,6 +319,23 @@ struct brcmf_pno_scanresults_le { __le32 count; }; +/** + * struct brcmf_cfg80211_vif_event - virtual interface event information. + * + * @vif_wq: waitqueue awaiting interface event from firmware. + * @vif_event_lock: protects other members in this structure. + * @vif_complete: completion for net attach. + * @action: either add, change, or delete. + * @vif: virtual interface object related to the event. + */ +struct brcmf_cfg80211_vif_event { + wait_queue_head_t vif_wq; + struct mutex vif_event_lock; + struct completion vif_complete; + u8 action; + struct brcmf_cfg80211_vif *vif; +}; + /** * struct brcmf_cfg80211_info - dongle private data of cfg80211 interface * @@ -352,6 +369,7 @@ struct brcmf_pno_scanresults_le { * @escan_ioctl_buf: dongle command buffer for escan commands. * @vif_list: linked list of vif instances. * @vif_cnt: number of vif instances. + * @vif_event: vif event signalling. */ struct brcmf_cfg80211_info { struct wiphy *wiphy; @@ -384,6 +402,7 @@ struct brcmf_cfg80211_info { u8 *escan_ioctl_buf; struct list_head vif_list; u8 vif_cnt; + struct brcmf_cfg80211_vif_event vif_event; }; /** @@ -452,7 +471,6 @@ s32 brcmf_cfg80211_up(struct net_device *ndev); s32 brcmf_cfg80211_down(struct net_device *ndev); struct brcmf_cfg80211_vif *brcmf_alloc_vif(struct brcmf_cfg80211_info *cfg, - struct net_device *netdev, enum nl80211_iftype type, bool pm_block); void brcmf_free_vif(struct brcmf_cfg80211_vif *vif); @@ -462,5 +480,11 @@ s32 brcmf_vif_set_mgmt_ie(struct brcmf_cfg80211_vif *vif, s32 pktflag, struct brcmf_tlv *brcmf_parse_tlvs(void *buf, int buflen, uint key); u16 channel_to_chanspec(struct ieee80211_channel *ch); u32 wl_get_vif_state_all(struct brcmf_cfg80211_info *cfg, unsigned long state); +void brcmf_cfg80211_arm_vif_event(struct brcmf_cfg80211_info *cfg, + struct brcmf_cfg80211_vif *vif); +bool brcmf_cfg80211_vif_event_armed(struct brcmf_cfg80211_info *cfg); +int brcmf_cfg80211_wait_vif_event_timeout(struct brcmf_cfg80211_info *cfg, + u8 action, ulong timeout); +void brcmf_cfg80211_vif_complete(struct brcmf_cfg80211_info *info); #endif /* _wl_cfg80211_h_ */ From 0de8aace0ff499bf1b6597e7f272961d2e335933 Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Fri, 8 Feb 2013 15:53:38 +0100 Subject: [PATCH 085/209] brcmfmac: add support for P2P listen mode. With this patch a device can be put in p2p listen mode and becomes visible for other p2p devices (via p2p_find). Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Arend van Spriel Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/dhd.h | 13 ++ .../net/wireless/brcm80211/brcmfmac/fweh.h | 6 +- drivers/net/wireless/brcm80211/brcmfmac/p2p.c | 150 +++++++++++--- drivers/net/wireless/brcm80211/brcmfmac/p2p.h | 15 +- .../wireless/brcm80211/brcmfmac/wl_cfg80211.c | 189 +++++++++++++++++- .../wireless/brcm80211/brcmfmac/wl_cfg80211.h | 2 + 6 files changed, 341 insertions(+), 34 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h index b61254dd42c0..82724d371dd0 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h @@ -452,6 +452,19 @@ struct brcmf_sta_info_le { __le32 rx_decrypt_failures; /* # of packet decrypted failed */ }; +/* + * WLC_E_PROBRESP_MSG + * WLC_E_P2P_PROBREQ_MSG + * WLC_E_ACTION_FRAME_RX + */ +struct brcmf_rx_mgmt_data { + __be16 version; + __be16 chanspec; + __be32 rssi; + __be32 mactime; + __be32 rate; +}; + /* Bus independent dongle command */ struct brcmf_dcmd { uint cmd; /* common dongle cmd definition */ diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fweh.h b/drivers/net/wireless/brcm80211/brcmfmac/fweh.h index 36901f76a3b5..8c39b51dcccf 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/fweh.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/fweh.h @@ -83,6 +83,7 @@ struct brcmf_event; BRCMF_ENUM_DEF(MULTICAST_DECODE_ERROR, 51) \ BRCMF_ENUM_DEF(TRACE, 52) \ BRCMF_ENUM_DEF(IF, 54) \ + BRCMF_ENUM_DEF(P2P_DISC_LISTEN_COMPLETE, 55) \ BRCMF_ENUM_DEF(RSSI, 56) \ BRCMF_ENUM_DEF(PFN_SCAN_COMPLETE, 57) \ BRCMF_ENUM_DEF(EXTLOG_MSG, 58) \ @@ -96,8 +97,11 @@ struct brcmf_event; BRCMF_ENUM_DEF(DFS_AP_RESUME, 66) \ BRCMF_ENUM_DEF(ESCAN_RESULT, 69) \ BRCMF_ENUM_DEF(ACTION_FRAME_OFF_CHAN_COMPLETE, 70) \ + BRCMF_ENUM_DEF(PROBERESP_MSG, 71) \ + BRCMF_ENUM_DEF(P2P_PROBEREQ_MSG, 72) \ BRCMF_ENUM_DEF(DCS_REQUEST, 73) \ - BRCMF_ENUM_DEF(FIFO_CREDIT_MAP, 74) + BRCMF_ENUM_DEF(FIFO_CREDIT_MAP, 74) \ + BRCMF_ENUM_DEF(ACTION_FRAME_RX, 75) #define BRCMF_ENUM_DEF(id, val) \ BRCMF_E_##id = (val), diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c index 25c6b7de0594..ecc96f356a55 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c @@ -318,11 +318,6 @@ static s32 brcmf_p2p_deinit_discovery(struct brcmf_p2p_info *p2p) brcmf_dbg(TRACE, "enter\n"); bss_dev = &p2p->bss_idx[P2PAPI_BSSCFG_DEVICE]; - if (bss_dev->vif == NULL) { - brcmf_err("do nothing, not initialized\n"); - return -EINVAL; - } - ifp = bss_dev->vif->ifp; /* Set the discovery state to SCAN */ @@ -348,8 +343,7 @@ static s32 brcmf_p2p_deinit_discovery(struct brcmf_p2p_info *p2p) * * Initializes the discovery device and configure the virtual interface. */ -static int brcmf_p2p_enable_discovery(struct brcmf_p2p_info *p2p, - const u8 *ie, u32 ie_len) +static int brcmf_p2p_enable_discovery(struct brcmf_p2p_info *p2p) { struct brcmf_cfg80211_vif *vif; s32 ret = 0; @@ -357,9 +351,8 @@ static int brcmf_p2p_enable_discovery(struct brcmf_p2p_info *p2p, brcmf_dbg(TRACE, "enter\n"); vif = p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif; if (vif) { - brcmf_dbg(INFO, - "DISCOVERY init already done, just process IE\n"); - goto set_ie; + brcmf_dbg(INFO, "DISCOVERY init already done\n"); + goto exit; } ret = brcmf_p2p_init_discovery(p2p); @@ -380,20 +373,36 @@ static int brcmf_p2p_enable_discovery(struct brcmf_p2p_info *p2p, if (ret < 0) brcmf_err("wsec error %d\n", ret); -set_ie: - if (ie_len) { - ret = brcmf_vif_set_mgmt_ie(vif, BRCMF_VNDR_IE_PRBREQ_FLAG, - ie, ie_len); - - if (ret < 0) { - brcmf_err("set probreq ie occurs error %d\n", ret); - goto exit; - } - } exit: return ret; } +/** + * brcmf_p2p_configure_probereq() - Configure probe request data. + * + * @p2p: P2P specific data. + * @ie: buffer containing information elements. + * @ie_len: length of @ie buffer. + * + */ +static int brcmf_p2p_configure_probereq(struct brcmf_p2p_info *p2p, + const u8 *ie, u32 ie_len) +{ + struct brcmf_cfg80211_vif *vif; + s32 err = 0; + + brcmf_dbg(TRACE, "enter\n"); + vif = p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif; + + err = brcmf_vif_set_mgmt_ie(vif, BRCMF_VNDR_IE_PRBREQ_FLAG, + ie, ie_len); + + if (err < 0) + brcmf_err("set probreq ie occurs error %d\n", err); + + return err; +} + /* * brcmf_p2p_escan() - initiate a P2P scan. * @@ -420,9 +429,6 @@ static s32 brcmf_p2p_escan(struct brcmf_p2p_info *p2p, u32 num_chans, struct brcmf_scan_params_le *sparams; struct brcmf_ssid ssid; - /* add padding if uneven */ - if (num_chans % 2) - memsize += sizeof(__le16); memsize += num_chans * sizeof(__le16); memblk = kzalloc(memsize, GFP_KERNEL); if (!memblk) @@ -639,8 +645,10 @@ int brcmf_p2p_scan_prep(struct wiphy *wiphy, clear_bit(BRCMF_P2P_STATUS_GO_NEG_PHASE, &p2p->status); brcmf_dbg(INFO, "P2P: GO_NEG_PHASE status cleared\n"); - err = brcmf_p2p_enable_discovery(p2p, request->ie, - request->ie_len); + err = brcmf_p2p_enable_discovery(p2p); + if (err == 0) + err = brcmf_p2p_configure_probereq(p2p, request->ie, + request->ie_len); /* * override .run_escan() callback. @@ -666,6 +674,92 @@ int brcmf_p2p_scan_prep(struct wiphy *wiphy, return err; } + +/** + * brcmf_p2p_remain_on_channel() - put device on channel and stay there. + * + * @wiphy: wiphy device. + * @channel: channel to stay on. + * @duration: time in ms to remain on channel. + * + */ +int brcmf_p2p_remain_on_channel(struct wiphy *wiphy, struct wireless_dev *wdev, + struct ieee80211_channel *channel, + unsigned int duration, u64 *cookie) +{ + struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); + struct brcmf_p2p_info *p2p = &cfg->p2p; + struct brcmf_cfg80211_vif *vif; + s32 err; + u16 chanspec; + + brcmf_dbg(TRACE, "Enter, channel: %d, duration ms (%d)\n", + ieee80211_frequency_to_channel(channel->center_freq), + duration); + + *cookie = 0; + err = brcmf_p2p_enable_discovery(p2p); + if (err) + goto exit; + + chanspec = channel_to_chanspec(channel); + vif = p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif; + err = brcmf_p2p_set_discover_state(vif->ifp, WL_P2P_DISC_ST_LISTEN, + chanspec, (u16)duration); + if (err) + goto exit; + + memcpy(&p2p->remain_on_channel, channel, + sizeof(p2p->remain_on_channel)); + + set_bit(BRCMF_P2P_STATUS_REMAIN_ON_CHANNEL, &p2p->status); + +exit: + cfg80211_ready_on_channel(wdev, *cookie, channel, duration, GFP_KERNEL); + return err; +} + + +/** + * brcmf_p2p_notify_listen_complete() - p2p listen has completed. + * + * @ifp: interfac control. + * @e: event message. Not used, to make it usable for fweh event dispatcher. + * @data: payload of message. Not used. + * + */ +int brcmf_p2p_notify_listen_complete(struct brcmf_if *ifp, + const struct brcmf_event_msg *e, + void *data) +{ + struct brcmf_cfg80211_info *cfg = ifp->drvr->config; + struct brcmf_p2p_info *p2p = &cfg->p2p; + + brcmf_dbg(TRACE, "Enter\n"); + if (test_and_clear_bit(BRCMF_P2P_STATUS_REMAIN_ON_CHANNEL, + &p2p->status)) + cfg80211_remain_on_channel_expired(&ifp->vif->wdev, 0, + &p2p->remain_on_channel, + GFP_KERNEL); + return 0; +} + + +/** + * brcmf_p2p_cancel_remain_on_channel() - cancel p2p listen state. + * + * @ifp: interfac control. + * + */ +void brcmf_p2p_cancel_remain_on_channel(struct brcmf_if *ifp) +{ + if (!ifp) + return; + brcmf_p2p_set_discover_state(ifp, WL_P2P_DISC_ST_SCAN, 0, 0); + brcmf_p2p_notify_listen_complete(ifp, NULL, NULL); +} + + /** * brcmf_p2p_attach() - attach for P2P. * @@ -689,7 +783,11 @@ void brcmf_p2p_attach(struct brcmf_cfg80211_info *cfg) */ void brcmf_p2p_detach(struct brcmf_p2p_info *p2p) { - brcmf_p2p_deinit_discovery(p2p); + if (p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif != NULL) { + brcmf_p2p_cancel_remain_on_channel( + p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif->ifp); + brcmf_p2p_deinit_discovery(p2p); + } /* just set it all to zero */ memset(p2p, 0, sizeof(*p2p)); } diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.h b/drivers/net/wireless/brcm80211/brcmfmac/p2p.h index f304adfcce60..df93272ad49f 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.h @@ -60,10 +60,10 @@ struct p2p_bss { * @BRCMF_P2P_STATUS_IF_DELETING: peer-to-peer vif delete sent to dongle. * @BRCMF_P2P_STATUS_IF_CHANGING: peer-to-peer vif change sent to dongle. * @BRCMF_P2P_STATUS_IF_CHANGED: peer-to-peer vif change completed on dongle. - * @BRCMF_P2P_STATUS_LISTEN_EXPIRED: listen duration expired. * @BRCMF_P2P_STATUS_ACTION_TX_COMPLETED: action frame tx completed. * @BRCMF_P2P_STATUS_ACTION_TX_NOACK: action frame tx not acked. * @BRCMF_P2P_STATUS_GO_NEG_PHASE: P2P GO negotiation ongoing. + * @BRCMF_P2P_STATUS_REMAIN_ON_CHANNEL: P2P listen, remaining on channel. */ enum brcmf_p2p_status { BRCMF_P2P_STATUS_IF_ADD = 0, @@ -71,10 +71,10 @@ enum brcmf_p2p_status { BRCMF_P2P_STATUS_IF_DELETING, BRCMF_P2P_STATUS_IF_CHANGING, BRCMF_P2P_STATUS_IF_CHANGED, - BRCMF_P2P_STATUS_LISTEN_EXPIRED, BRCMF_P2P_STATUS_ACTION_TX_COMPLETED, BRCMF_P2P_STATUS_ACTION_TX_NOACK, - BRCMF_P2P_STATUS_GO_NEG_PHASE + BRCMF_P2P_STATUS_GO_NEG_PHASE, + BRCMF_P2P_STATUS_REMAIN_ON_CHANNEL }; /** @@ -88,6 +88,7 @@ enum brcmf_p2p_status { * @listen_timer: timer for @WL_P2P_DISC_ST_LISTEN discover state. * @ssid: ssid for P2P GO. * @listen_channel: channel for @WL_P2P_DISC_ST_LISTEN discover state. + * @remain_on_channel: contains copy of struct used by cfg80211. */ struct brcmf_p2p_info { struct brcmf_cfg80211_info *cfg; @@ -98,6 +99,7 @@ struct brcmf_p2p_info { struct timer_list listen_timer; struct brcmf_ssid ssid; u8 listen_channel; + struct ieee80211_channel remain_on_channel; }; void brcmf_p2p_attach(struct brcmf_cfg80211_info *cfg); @@ -110,5 +112,12 @@ int brcmf_p2p_start_device(struct wiphy *wiphy, struct wireless_dev *wdev); void brcmf_p2p_stop_device(struct wiphy *wiphy, struct wireless_dev *wdev); int brcmf_p2p_scan_prep(struct wiphy *wiphy, struct cfg80211_scan_request *request); +int brcmf_p2p_remain_on_channel(struct wiphy *wiphy, struct wireless_dev *wdev, + struct ieee80211_channel *channel, + unsigned int duration, u64 *cookie); +int brcmf_p2p_notify_listen_complete(struct brcmf_if *ifp, + const struct brcmf_event_msg *e, + void *data); +void brcmf_p2p_cancel_remain_on_channel(struct brcmf_if *ifp); #endif /* WL_CFGP2P_H_ */ diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 6b4e877123d6..6ab6397219a5 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -3359,6 +3359,11 @@ s32 brcmf_vif_set_mgmt_ie(struct brcmf_cfg80211_vif *vif, s32 pktflag, mgmt_ie_len = &saved_ie->probe_req_ie_len; mgmt_ie_buf_len = sizeof(saved_ie->probe_req_ie); break; + case BRCMF_VNDR_IE_PRBRSP_FLAG: + mgmt_ie_buf = saved_ie->probe_res_ie; + mgmt_ie_len = &saved_ie->probe_res_ie_len; + mgmt_ie_buf_len = sizeof(saved_ie->probe_res_ie); + break; default: err = -EPERM; brcmf_err("not suitable type\n"); @@ -3674,6 +3679,150 @@ brcmf_cfg80211_del_station(struct wiphy *wiphy, struct net_device *ndev, return err; } + +static void +brcmf_cfg80211_mgmt_frame_register(struct wiphy *wiphy, + struct wireless_dev *wdev, + u16 frame_type, bool reg) +{ + struct brcmf_if *ifp = netdev_priv(wdev->netdev); + struct brcmf_cfg80211_vif *vif = ifp->vif; + u16 mgmt_type; + + brcmf_dbg(TRACE, "Enter, frame_type %04x, reg=%d\n", frame_type, reg); + + mgmt_type = (frame_type & IEEE80211_FCTL_STYPE) >> 4; + if (reg) + vif->mgmt_rx_reg |= BIT(mgmt_type); + else + vif->mgmt_rx_reg |= ~BIT(mgmt_type); +} + + +static int +brcmf_cfg80211_mgmt_tx(struct wiphy *wiphy, struct wireless_dev *wdev, + struct ieee80211_channel *chan, bool offchan, + unsigned int wait, const u8 *buf, size_t len, + bool no_cck, bool dont_wait_for_ack, u64 *cookie) +{ + struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); + const struct ieee80211_mgmt *mgmt; + struct brcmf_cfg80211_vif *vif; + s32 err = 0; + s32 ie_offset; + s32 ie_len; + + brcmf_dbg(TRACE, "Enter\n"); + + *cookie = 0; + + mgmt = (const struct ieee80211_mgmt *)buf; + + if (ieee80211_is_mgmt(mgmt->frame_control)) { + if (ieee80211_is_probe_resp(mgmt->frame_control)) { + /* Right now the only reason to get a probe response */ + /* is for p2p listen response from wpa_supplicant. */ + /* Unfortunately the wpa_supplicant sends it on the */ + /* primary ndev, while dongle wants it on the p2p */ + /* vif. Since this is only reason for a probe */ + /* response to be sent, the vif is taken from cfg. */ + /* If ever desired to send proberesp for non p2p */ + /* response then data should be checked for */ + /* "DIRECT-". Note in future supplicant will take */ + /* dedicated p2p wdev to do this and then this 'hack'*/ + /* is not needed anymore. */ + ie_offset = DOT11_MGMT_HDR_LEN + + DOT11_BCN_PRB_FIXED_LEN; + ie_len = len - ie_offset; + + vif = cfg->p2p.bss_idx[P2PAPI_BSSCFG_DEVICE].vif; + if (vif == NULL) { + brcmf_err("No p2p device available for probe response\n"); + err = -ENODEV; + goto exit; + } + err = brcmf_vif_set_mgmt_ie(vif, + BRCMF_VNDR_IE_PRBRSP_FLAG, + &buf[ie_offset], + ie_len); + cfg80211_mgmt_tx_status(wdev, *cookie, buf, len, true, + GFP_KERNEL); + goto exit; + } + } + brcmf_dbg(TRACE, "Unhandled, is_mgmt %d, fc=%04x!!!!!\n", + ieee80211_is_mgmt(mgmt->frame_control), mgmt->frame_control); +exit: + return err; +} + + +static int +brcmf_cfg80211_cancel_remain_on_channel(struct wiphy *wiphy, + struct wireless_dev *wdev, + u64 cookie) +{ + struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); + struct brcmf_cfg80211_vif *vif; + int err = 0; + + brcmf_dbg(TRACE, "Enter p2p listen cancel\n"); + + vif = cfg->p2p.bss_idx[P2PAPI_BSSCFG_DEVICE].vif; + if (vif == NULL) { + brcmf_err("No p2p device available for probe response\n"); + err = -ENODEV; + goto exit; + } + brcmf_p2p_cancel_remain_on_channel(vif->ifp); +exit: + return err; +} + +static s32 brcmf_notify_rx_mgmt_p2p_probereq(struct brcmf_if *ifp, + const struct brcmf_event_msg *e, + void *data) +{ + struct wireless_dev *wdev; + struct brcmf_cfg80211_vif *vif = ifp->vif; + struct brcmf_rx_mgmt_data *rxframe = (struct brcmf_rx_mgmt_data *)data; + u16 chanspec = be16_to_cpu(rxframe->chanspec); + u8 *mgmt_frame; + u32 mgmt_frame_len; + s32 freq; + u16 mgmt_type; + + brcmf_dbg(INFO, + "Enter: event %d reason %d\n", e->event_code, e->reason); + + /* Firmware sends us two proberesponses for each idx one. At the */ + /* moment only bsscfgidx 0 is passed up to supplicant */ + if (e->bsscfgidx) + return 0; + + /* Check if wpa_supplicant has registered for this frame */ + brcmf_dbg(INFO, "vif->mgmt_rx_reg %04x\n", vif->mgmt_rx_reg); + mgmt_type = (IEEE80211_STYPE_PROBE_REQ & IEEE80211_FCTL_STYPE) >> 4; + if ((vif->mgmt_rx_reg & BIT(mgmt_type)) == 0) + return 0; + + mgmt_frame = (u8 *)(rxframe + 1); + mgmt_frame_len = e->datalen - sizeof(*rxframe); + freq = ieee80211_channel_to_frequency(CHSPEC_CHANNEL(chanspec), + CHSPEC_IS2G(chanspec) ? + IEEE80211_BAND_2GHZ : + IEEE80211_BAND_5GHZ); + wdev = ifp->ndev->ieee80211_ptr; + cfg80211_rx_mgmt(wdev, freq, 0, mgmt_frame, mgmt_frame_len, GFP_ATOMIC); + + brcmf_dbg(INFO, + "mgmt_frame_len (%d) , e->datalen (%d), chanspec (%04x), freq (%d)\n", + mgmt_frame_len, e->datalen, chanspec, freq); + + return 0; +} + + static struct cfg80211_ops wl_cfg80211_ops = { .add_virtual_intf = brcmf_cfg80211_add_iface, .del_virtual_intf = brcmf_cfg80211_del_iface, @@ -3703,6 +3852,10 @@ static struct cfg80211_ops wl_cfg80211_ops = { .del_station = brcmf_cfg80211_del_station, .sched_scan_start = brcmf_cfg80211_sched_scan_start, .sched_scan_stop = brcmf_cfg80211_sched_scan_stop, + .mgmt_frame_register = brcmf_cfg80211_mgmt_frame_register, + .mgmt_tx = brcmf_cfg80211_mgmt_tx, + .remain_on_channel = brcmf_p2p_remain_on_channel, + .cancel_remain_on_channel = brcmf_cfg80211_cancel_remain_on_channel, #ifdef CONFIG_NL80211_TESTMODE .testmode_cmd = brcmf_cfg80211_testmode #endif @@ -3765,6 +3918,30 @@ static const struct ieee80211_iface_combination brcmf_iface_combos[] = { } }; +static const struct ieee80211_txrx_stypes +brcmf_txrx_stypes[NUM_NL80211_IFTYPES] = { + [NL80211_IFTYPE_STATION] = { + .tx = 0xffff, + .rx = BIT(IEEE80211_STYPE_ACTION >> 4) | + BIT(IEEE80211_STYPE_PROBE_REQ >> 4) + }, + [NL80211_IFTYPE_P2P_CLIENT] = { + .tx = 0xffff, + .rx = BIT(IEEE80211_STYPE_ACTION >> 4) | + BIT(IEEE80211_STYPE_PROBE_REQ >> 4) + }, + [NL80211_IFTYPE_P2P_GO] = { + .tx = 0xffff, + .rx = BIT(IEEE80211_STYPE_ASSOC_REQ >> 4) | + BIT(IEEE80211_STYPE_REASSOC_REQ >> 4) | + BIT(IEEE80211_STYPE_PROBE_REQ >> 4) | + BIT(IEEE80211_STYPE_DISASSOC >> 4) | + BIT(IEEE80211_STYPE_AUTH >> 4) | + BIT(IEEE80211_STYPE_DEAUTH >> 4) | + BIT(IEEE80211_STYPE_ACTION >> 4) + } +}; + static struct wiphy *brcmf_setup_wiphy(struct device *phydev) { struct wiphy *wiphy; @@ -3797,10 +3974,10 @@ static struct wiphy *brcmf_setup_wiphy(struct device *phydev) wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM; wiphy->cipher_suites = __wl_cipher_suites; wiphy->n_cipher_suites = ARRAY_SIZE(__wl_cipher_suites); - wiphy->flags |= WIPHY_FLAG_PS_ON_BY_DEFAULT; /* enable power - * save mode - * by default - */ + wiphy->flags |= WIPHY_FLAG_PS_ON_BY_DEFAULT | + WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL; + wiphy->mgmt_stypes = brcmf_txrx_stypes; + wiphy->max_remain_on_channel_duration = 5000; brcmf_wiphy_pno_params(wiphy); err = wiphy_register(wiphy); if (err < 0) { @@ -4271,6 +4448,10 @@ static void brcmf_register_event_handlers(struct brcmf_cfg80211_info *cfg) brcmf_notify_sched_scan_results); brcmf_fweh_register(cfg->pub, BRCMF_E_IF, brcmf_notify_vif_event); + brcmf_fweh_register(cfg->pub, BRCMF_E_P2P_PROBEREQ_MSG, + brcmf_notify_rx_mgmt_p2p_probereq); + brcmf_fweh_register(cfg->pub, BRCMF_E_P2P_DISC_LISTEN_COMPLETE, + brcmf_p2p_notify_listen_complete); } static void brcmf_deinit_priv_mem(struct brcmf_cfg80211_info *cfg) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h index 691f613d99d2..a996afa8df4d 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h @@ -189,6 +189,7 @@ struct vif_saved_ie { * @sme_state: SME state using enum brcmf_vif_status bits. * @pm_block: power-management blocked. * @list: linked list. + * @mgmt_rx_reg: registered rx mgmt frame types. */ struct brcmf_cfg80211_vif { struct brcmf_if *ifp; @@ -200,6 +201,7 @@ struct brcmf_cfg80211_vif { bool pm_block; struct vif_saved_ie saved_ie; struct list_head list; + u16 mgmt_rx_reg; }; /* association inform */ From 33a6b157f80af5e2a98a244b3dfff650bc5c7bcc Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Fri, 8 Feb 2013 15:53:39 +0100 Subject: [PATCH 086/209] brcmfmac: fix compiler warning on printf format On 64-bit target a warning was given when using %d to print sizeof() value: CC [M] drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.o brcm80211/brcmfmac/wl_cfg80211.c: In function 'brcmf_alloc_vif': brcm80211/brcmfmac/wl_cfg80211.c:3884:2: error: format '%d' expects argument of type 'int', but argument 3 has type 'long unsigned int' [-Werror=format] Fixed using %zu instead. Reviewed-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 6ab6397219a5..6cd47e28b016 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -3997,7 +3997,7 @@ struct brcmf_cfg80211_vif *brcmf_alloc_vif(struct brcmf_cfg80211_info *cfg, if (cfg->vif_cnt == BRCMF_IFACE_MAX_CNT) return ERR_PTR(-ENOSPC); - brcmf_dbg(TRACE, "allocating virtual interface (size=%d)\n", + brcmf_dbg(TRACE, "allocating virtual interface (size=%zu)\n", sizeof(*vif)); vif = kzalloc(sizeof(*vif), GFP_KERNEL); if (!vif) From de66efcadbb51935c8c668a38f2f1c187f349af9 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Fri, 8 Feb 2013 15:53:40 +0100 Subject: [PATCH 087/209] brcmfmac: fix generation of the p2p related mac addresses The driver determines the P2P interface address and device address from the primary mac address. However, the function used an invalid input. This caused a mac address mismatch between firmware and driver. This was hidden because the brcmf_if_add() function corrected the error upon receiving the IF_ADD event from firmware. Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/p2p.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c index ecc96f356a55..cec4116379ea 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c @@ -132,12 +132,10 @@ static int brcmf_p2p_set_firmware(struct brcmf_p2p_info *p2p) */ static void brcmf_p2p_generate_bss_mac(struct brcmf_p2p_info *p2p) { - struct net_device *ndev = cfg_to_ndev(p2p->cfg); - /* Generate the P2P Device Address. This consists of the device's * primary MAC address with the locally administered bit set. */ - memcpy(p2p->dev_addr, ndev->dev_addr, ETH_ALEN); + memcpy(p2p->dev_addr, p2p->cfg->pub->mac, ETH_ALEN); p2p->dev_addr[0] |= 0x02; /* Generate the P2P Interface Address. If the discovery and connection From 5f4f9f114eef4907b6077d19dd5ad7d0a27e0f80 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Fri, 8 Feb 2013 15:53:41 +0100 Subject: [PATCH 088/209] brcmfmac: implement support for deleting virtual interfaces Deletion of the virtual interface was not fully supported so adding it now. Tested using p2p_connect command in wpa_supplicant. Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/dhd.h | 1 + drivers/net/wireless/brcm80211/brcmfmac/p2p.c | 64 ++++-- .../wireless/brcm80211/brcmfmac/wl_cfg80211.c | 199 +++++++++++------- .../wireless/brcm80211/brcmfmac/wl_cfg80211.h | 4 + 4 files changed, 176 insertions(+), 92 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h index 82724d371dd0..c4f30bd014dd 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h @@ -150,6 +150,7 @@ #define BRCMF_E_REASON_MINTXRATE 9 #define BRCMF_E_REASON_TXFAIL 10 +#define BRCMF_E_REASON_LINK_BSSCFG_DIS 4 #define BRCMF_E_REASON_FAST_ROAM_FAILED 5 #define BRCMF_E_REASON_DIRECTED_ROAM 6 #define BRCMF_E_REASON_TSPEC_REJECTED 7 diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c index cec4116379ea..fff5722d4c0b 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c @@ -827,6 +827,26 @@ static int brcmf_p2p_request_p2p_if(struct brcmf_if *ifp, u8 ea[ETH_ALEN], return err; } +static int brcmf_p2p_disable_p2p_if(struct brcmf_cfg80211_vif *vif) +{ + struct brcmf_cfg80211_info *cfg = wdev_to_cfg(&vif->wdev); + struct net_device *pri_ndev = cfg_to_ndev(cfg); + struct brcmf_if *ifp = netdev_priv(pri_ndev); + u8 *addr = vif->wdev.netdev->dev_addr; + + return brcmf_fil_iovar_data_set(ifp, "p2p_ifdis", addr, ETH_ALEN); +} + +static int brcmf_p2p_release_p2p_if(struct brcmf_cfg80211_vif *vif) +{ + struct brcmf_cfg80211_info *cfg = wdev_to_cfg(&vif->wdev); + struct net_device *pri_ndev = cfg_to_ndev(cfg); + struct brcmf_if *ifp = netdev_priv(pri_ndev); + u8 *addr = vif->wdev.netdev->dev_addr; + + return brcmf_fil_iovar_data_set(ifp, "p2p_ifdel", addr, ETH_ALEN); +} + /** * brcmf_p2p_add_vif() - create a new P2P virtual interface. * @@ -910,23 +930,43 @@ int brcmf_p2p_del_vif(struct wiphy *wiphy, struct wireless_dev *wdev) { struct brcmf_cfg80211_info *cfg = wiphy_priv(wiphy); struct brcmf_cfg80211_vif *vif; + unsigned long jiffie_timeout = msecs_to_jiffies(1500); + bool wait_for_disable = false; int err; + brcmf_dbg(TRACE, "delete P2P vif\n"); vif = container_of(wdev, struct brcmf_cfg80211_vif, wdev); - if (brcmf_cfg80211_vif_event_armed(cfg)) - return -EBUSY; + switch (vif->wdev.iftype) { + case NL80211_IFTYPE_P2P_CLIENT: + if (test_bit(BRCMF_VIF_STATUS_DISCONNECTING, &vif->sme_state)) + wait_for_disable = true; + break; + + case NL80211_IFTYPE_P2P_GO: + if (!brcmf_p2p_disable_p2p_if(vif)) + wait_for_disable = true; + break; + + case NL80211_IFTYPE_P2P_DEVICE: + default: + return -ENOTSUPP; + break; + } + + if (wait_for_disable) + wait_for_completion_timeout(&cfg->vif_disabled, 500); + + brcmf_vif_clear_mgmt_ies(vif); brcmf_cfg80211_arm_vif_event(cfg, vif); - /* wait for firmware event */ - err = brcmf_cfg80211_wait_vif_event_timeout(cfg, BRCMF_E_IF_DEL, - msecs_to_jiffies(1500)); + err = brcmf_p2p_release_p2p_if(vif); + if (!err) + /* wait for firmware event */ + err = brcmf_cfg80211_wait_vif_event_timeout(cfg, BRCMF_E_IF_DEL, + jiffie_timeout); brcmf_cfg80211_arm_vif_event(cfg, NULL); - if (wdev->netdev) - brcmf_dbg(INFO, "deleting vif \"%s\"\n", wdev->netdev->name); - else - brcmf_dbg(INFO, "deleting vif \"wdev-%u\"\n", - wdev->identifier); - brcmf_err("enter - not supported yet\n"); - return -EOPNOTSUPP; + brcmf_free_vif(vif); + + return err; } diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 6cd47e28b016..d792c3b2331a 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -445,9 +445,103 @@ static struct wireless_dev *brcmf_cfg80211_add_iface(struct wiphy *wiphy, } } +static void brcmf_set_mpc(struct net_device *ndev, int mpc) +{ + struct brcmf_if *ifp = netdev_priv(ndev); + s32 err = 0; + + if (check_vif_up(ifp->vif)) { + err = brcmf_fil_iovar_int_set(ifp, "mpc", mpc); + if (err) { + brcmf_err("fail to set mpc\n"); + return; + } + brcmf_dbg(INFO, "MPC : %d\n", mpc); + } +} + +static s32 +brcmf_notify_escan_complete(struct brcmf_cfg80211_info *cfg, + struct net_device *ndev, + bool aborted, bool fw_abort) +{ + struct brcmf_scan_params_le params_le; + struct cfg80211_scan_request *scan_request; + s32 err = 0; + + brcmf_dbg(SCAN, "Enter\n"); + + /* clear scan request, because the FW abort can cause a second call */ + /* to this functon and might cause a double cfg80211_scan_done */ + scan_request = cfg->scan_request; + cfg->scan_request = NULL; + + if (timer_pending(&cfg->escan_timeout)) + del_timer_sync(&cfg->escan_timeout); + + if (fw_abort) { + /* Do a scan abort to stop the driver's scan engine */ + brcmf_dbg(SCAN, "ABORT scan in firmware\n"); + memset(¶ms_le, 0, sizeof(params_le)); + memset(params_le.bssid, 0xFF, ETH_ALEN); + params_le.bss_type = DOT11_BSSTYPE_ANY; + params_le.scan_type = 0; + params_le.channel_num = cpu_to_le32(1); + params_le.nprobes = cpu_to_le32(1); + params_le.active_time = cpu_to_le32(-1); + params_le.passive_time = cpu_to_le32(-1); + params_le.home_time = cpu_to_le32(-1); + /* Scan is aborted by setting channel_list[0] to -1 */ + params_le.channel_list[0] = cpu_to_le16(-1); + /* E-Scan (or anyother type) can be aborted by SCAN */ + err = brcmf_fil_cmd_data_set(netdev_priv(ndev), BRCMF_C_SCAN, + ¶ms_le, sizeof(params_le)); + if (err) + brcmf_err("Scan abort failed\n"); + } + /* + * e-scan can be initiated by scheduled scan + * which takes precedence. + */ + if (cfg->sched_escan) { + brcmf_dbg(SCAN, "scheduled scan completed\n"); + cfg->sched_escan = false; + if (!aborted) + cfg80211_sched_scan_results(cfg_to_wiphy(cfg)); + brcmf_set_mpc(ndev, 1); + } else if (scan_request) { + brcmf_dbg(SCAN, "ESCAN Completed scan: %s\n", + aborted ? "Aborted" : "Done"); + cfg80211_scan_done(scan_request, aborted); + brcmf_set_mpc(ndev, 1); + } + if (!test_and_clear_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status)) { + brcmf_err("Scan complete while device not scanning\n"); + return -EPERM; + } + + return err; +} + static int brcmf_cfg80211_del_iface(struct wiphy *wiphy, struct wireless_dev *wdev) { + struct brcmf_cfg80211_info *cfg = wiphy_priv(wiphy); + struct net_device *ndev = wdev->netdev; + + /* vif event pending in firmware */ + if (brcmf_cfg80211_vif_event_armed(cfg)) + return -EBUSY; + + if (ndev) { + if (test_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status) && + cfg->escan_info.ndev == ndev) + brcmf_notify_escan_complete(cfg, ndev, true, + true); + + brcmf_fil_iovar_int_set(netdev_priv(ndev), "mpc", 1); + } + switch (wdev->iftype) { case NL80211_IFTYPE_ADHOC: case NL80211_IFTYPE_STATION: @@ -525,21 +619,6 @@ done: return err; } -static void brcmf_set_mpc(struct net_device *ndev, int mpc) -{ - struct brcmf_if *ifp = netdev_priv(ndev); - s32 err = 0; - - if (check_vif_up(ifp->vif)) { - err = brcmf_fil_iovar_int_set(ifp, "mpc", mpc); - if (err) { - brcmf_err("fail to set mpc\n"); - return; - } - brcmf_dbg(INFO, "MPC : %d\n", mpc); - } -} - static void brcmf_escan_prep(struct brcmf_scan_params_le *params_le, struct cfg80211_scan_request *request) { @@ -619,69 +698,6 @@ static void brcmf_escan_prep(struct brcmf_scan_params_le *params_le, (n_channels & BRCMF_SCAN_PARAMS_COUNT_MASK)); } -static s32 -brcmf_notify_escan_complete(struct brcmf_cfg80211_info *cfg, - struct net_device *ndev, - bool aborted, bool fw_abort) -{ - struct brcmf_scan_params_le params_le; - struct cfg80211_scan_request *scan_request; - s32 err = 0; - - brcmf_dbg(SCAN, "Enter\n"); - - /* clear scan request, because the FW abort can cause a second call */ - /* to this functon and might cause a double cfg80211_scan_done */ - scan_request = cfg->scan_request; - cfg->scan_request = NULL; - - if (timer_pending(&cfg->escan_timeout)) - del_timer_sync(&cfg->escan_timeout); - - if (fw_abort) { - /* Do a scan abort to stop the driver's scan engine */ - brcmf_dbg(SCAN, "ABORT scan in firmware\n"); - memset(¶ms_le, 0, sizeof(params_le)); - memset(params_le.bssid, 0xFF, ETH_ALEN); - params_le.bss_type = DOT11_BSSTYPE_ANY; - params_le.scan_type = 0; - params_le.channel_num = cpu_to_le32(1); - params_le.nprobes = cpu_to_le32(1); - params_le.active_time = cpu_to_le32(-1); - params_le.passive_time = cpu_to_le32(-1); - params_le.home_time = cpu_to_le32(-1); - /* Scan is aborted by setting channel_list[0] to -1 */ - params_le.channel_list[0] = cpu_to_le16(-1); - /* E-Scan (or anyother type) can be aborted by SCAN */ - err = brcmf_fil_cmd_data_set(netdev_priv(ndev), BRCMF_C_SCAN, - ¶ms_le, sizeof(params_le)); - if (err) - brcmf_err("Scan abort failed\n"); - } - /* - * e-scan can be initiated by scheduled scan - * which takes precedence. - */ - if (cfg->sched_escan) { - brcmf_dbg(SCAN, "scheduled scan completed\n"); - cfg->sched_escan = false; - if (!aborted) - cfg80211_sched_scan_results(cfg_to_wiphy(cfg)); - brcmf_set_mpc(ndev, 1); - } else if (scan_request) { - brcmf_dbg(SCAN, "ESCAN Completed scan: %s\n", - aborted ? "Aborted" : "Done"); - cfg80211_scan_done(scan_request, aborted); - brcmf_set_mpc(ndev, 1); - } - if (!test_and_clear_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status)) { - brcmf_err("Scan complete while device not scanning\n"); - return -EPERM; - } - - return err; -} - static s32 brcmf_run_escan(struct brcmf_cfg80211_info *cfg, struct net_device *ndev, struct cfg80211_scan_request *request, u16 action) @@ -3474,6 +3490,22 @@ exit: return err; } +s32 brcmf_vif_clear_mgmt_ies(struct brcmf_cfg80211_vif *vif) +{ + s32 pktflags[] = { + BRCMF_VNDR_IE_PRBREQ_FLAG, + BRCMF_VNDR_IE_PRBRSP_FLAG, + BRCMF_VNDR_IE_BEACON_FLAG + }; + int i; + + for (i = 0; i < ARRAY_SIZE(pktflags); i++) + brcmf_vif_set_mgmt_ie(vif, pktflags[i], NULL, 0); + + memset(&vif->saved_ie, 0, sizeof(vif->saved_ie)); + return 0; +} + static s32 brcmf_cfg80211_start_ap(struct wiphy *wiphy, struct net_device *ndev, struct cfg80211_ap_settings *settings) @@ -4260,6 +4292,12 @@ brcmf_notify_connect_status_ap(struct brcmf_cfg80211_info *cfg, struct station_info sinfo; brcmf_dbg(CONN, "event %d, reason %d\n", event, reason); + if (event == BRCMF_E_LINK && reason == BRCMF_E_REASON_LINK_BSSCFG_DIS && + ndev != cfg_to_ndev(cfg)) { + brcmf_dbg(CONN, "AP mode link down\n"); + complete(&cfg->vif_disabled); + return 0; + } if (((event == BRCMF_E_ASSOC_IND) || (event == BRCMF_E_REASSOC_IND)) && (reason == BRCMF_E_STATUS_SUCCESS)) { @@ -4316,6 +4354,8 @@ brcmf_notify_connect_status(struct brcmf_if *ifp, } brcmf_link_down(ifp->vif); brcmf_init_prof(ndev_to_prof(ndev)); + if (ndev != cfg_to_ndev(cfg)) + complete(&cfg->vif_disabled); } else if (brcmf_is_nonetwork(cfg, e)) { if (brcmf_is_ibssmode(ifp->vif)) clear_bit(BRCMF_VIF_STATUS_CONNECTING, @@ -4401,7 +4441,6 @@ static s32 brcmf_notify_vif_event(struct brcmf_if *ifp, case BRCMF_E_IF_DEL: ifp->vif = NULL; - brcmf_free_vif(vif); mutex_unlock(&event->vif_event_lock); /* event may not be upon user request */ if (brcmf_cfg80211_vif_event_armed(cfg)) @@ -4507,7 +4546,7 @@ static s32 wl_init_priv(struct brcmf_cfg80211_info *cfg) mutex_init(&cfg->usr_sync); brcmf_init_escan(cfg); brcmf_init_conf(cfg->conf); - + init_completion(&cfg->vif_disabled); return err; } diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h index a996afa8df4d..506818844a74 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h @@ -148,6 +148,7 @@ struct brcmf_cfg80211_profile { * @BRCMF_VIF_STATUS_READY: ready for operation. * @BRCMF_VIF_STATUS_CONNECTING: connect/join in progress. * @BRCMF_VIF_STATUS_CONNECTED: connected/joined succesfully. + * @BRCMF_VIF_STATUS_DISCONNECTING: disconnect/disable in progress. * @BRCMF_VIF_STATUS_AP_CREATING: interface configured for AP operation. * @BRCMF_VIF_STATUS_AP_CREATED: AP operation started. */ @@ -155,6 +156,7 @@ enum brcmf_vif_status { BRCMF_VIF_STATUS_READY, BRCMF_VIF_STATUS_CONNECTING, BRCMF_VIF_STATUS_CONNECTED, + BRCMF_VIF_STATUS_DISCONNECTING, BRCMF_VIF_STATUS_AP_CREATING, BRCMF_VIF_STATUS_AP_CREATED }; @@ -405,6 +407,7 @@ struct brcmf_cfg80211_info { struct list_head vif_list; u8 vif_cnt; struct brcmf_cfg80211_vif_event vif_event; + struct completion vif_disabled; }; /** @@ -479,6 +482,7 @@ void brcmf_free_vif(struct brcmf_cfg80211_vif *vif); s32 brcmf_vif_set_mgmt_ie(struct brcmf_cfg80211_vif *vif, s32 pktflag, const u8 *vndr_ie_buf, u32 vndr_ie_len); +s32 brcmf_vif_clear_mgmt_ies(struct brcmf_cfg80211_vif *vif); struct brcmf_tlv *brcmf_parse_tlvs(void *buf, int buflen, uint key); u16 channel_to_chanspec(struct ieee80211_channel *ch); u32 wl_get_vif_state_all(struct brcmf_cfg80211_info *cfg, unsigned long state); From 0f8ffe177426e536def8f19f7eca5b895103c62a Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Fri, 8 Feb 2013 15:53:42 +0100 Subject: [PATCH 089/209] brcmfmac: update escan for multiple bss and simplify. Add support for scanning on non primary netdev (p2p) and simplify the p2p scanning preparation. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/p2p.c | 92 ++----------------- drivers/net/wireless/brcm80211/brcmfmac/p2p.h | 3 +- .../wireless/brcm80211/brcmfmac/wl_cfg80211.c | 8 +- 3 files changed, 19 insertions(+), 84 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c index fff5722d4c0b..aef0287f5857 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c @@ -91,11 +91,6 @@ struct brcmf_p2p_scan_le { }; }; -static struct brcmf_cfg80211_vif *p2p_discover_vif(struct brcmf_p2p_info *p2p) -{ - return p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif; -} - /** * brcmf_p2p_set_firmware() - prepare firmware for peer-to-peer operation. * @@ -194,34 +189,6 @@ static s32 brcmf_p2p_set_discover_state(struct brcmf_if *ifp, u8 state, return ret; } -/** - * brcmf_p2p_discover_disable_search() - reset discover state. - * - * @p2p: P2P specific data. - * - * Reset the discover state to @WL_P2P_DISC_ST_SCAN. Returns 0 on success. - */ -static s32 brcmf_p2p_discover_disable_search(struct brcmf_p2p_info *p2p) -{ - struct brcmf_cfg80211_vif *vif = p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif; - struct brcmf_p2p_disc_st_le discovery_mode; - int ret; - - /* - * vif presence indicates discovery is initialized. - */ - if (!vif) - return -ENODEV; - - ret = brcmf_fil_bsscfg_data_get(vif->ifp, "p2p_state", - &discovery_mode, - sizeof(discovery_mode)); - if (!ret && discovery_mode.state != WL_P2P_DISC_ST_SCAN) - ret = brcmf_p2p_set_discover_state(vif->ifp, - WL_P2P_DISC_ST_SCAN, 0, 0); - return ret; -} - /** * brcmf_p2p_init_discovery() - enable discovery in the firmware. * @@ -376,32 +343,6 @@ exit: } /** - * brcmf_p2p_configure_probereq() - Configure probe request data. - * - * @p2p: P2P specific data. - * @ie: buffer containing information elements. - * @ie_len: length of @ie buffer. - * - */ -static int brcmf_p2p_configure_probereq(struct brcmf_p2p_info *p2p, - const u8 *ie, u32 ie_len) -{ - struct brcmf_cfg80211_vif *vif; - s32 err = 0; - - brcmf_dbg(TRACE, "enter\n"); - vif = p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif; - - err = brcmf_vif_set_mgmt_ie(vif, BRCMF_VNDR_IE_PRBREQ_FLAG, - ie, ie_len); - - if (err < 0) - brcmf_err("set probreq ie occurs error %d\n", err); - - return err; -} - -/* * brcmf_p2p_escan() - initiate a P2P scan. * * @p2p: P2P specific data. @@ -621,12 +562,14 @@ exit: * * @wiphy: wiphy device. * @request: scan request from cfg80211. + * @vif: vif on which scan request is to be executed. * * Prepare the scan appropriately for type of scan requested. Overrides the * escan .run() callback for peer-to-peer scanning. */ int brcmf_p2p_scan_prep(struct wiphy *wiphy, - struct cfg80211_scan_request *request) + struct cfg80211_scan_request *request, + struct brcmf_cfg80211_vif *vif) { struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); struct brcmf_p2p_info *p2p = &cfg->p2p; @@ -644,31 +587,16 @@ int brcmf_p2p_scan_prep(struct wiphy *wiphy, brcmf_dbg(INFO, "P2P: GO_NEG_PHASE status cleared\n"); err = brcmf_p2p_enable_discovery(p2p); - if (err == 0) - err = brcmf_p2p_configure_probereq(p2p, request->ie, - request->ie_len); + if (err) + return err; - /* - * override .run_escan() callback. - */ + vif = p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif; + + /* override .run_escan() callback. */ cfg->escan_info.run = brcmf_p2p_run_escan; - } else { - /* - * legacy scan trigger - * So, we have to disable p2p discovery if p2p discovery is on - */ - (void)brcmf_p2p_discover_disable_search(p2p); - - /* - * clear p2p vendor ies for probe request set by - * previous p2p related scan(s). - */ - if (p2p_discover_vif(p2p)) - err = brcmf_vif_set_mgmt_ie(p2p_discover_vif(p2p), - BRCMF_VNDR_IE_PRBREQ_FLAG, - request->ie, - request->ie_len); } + err = brcmf_vif_set_mgmt_ie(vif, BRCMF_VNDR_IE_PRBREQ_FLAG, + request->ie, request->ie_len); return err; } diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.h b/drivers/net/wireless/brcm80211/brcmfmac/p2p.h index df93272ad49f..1f97afd8709e 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.h @@ -111,7 +111,8 @@ int brcmf_p2p_del_vif(struct wiphy *wiphy, struct wireless_dev *wdev); int brcmf_p2p_start_device(struct wiphy *wiphy, struct wireless_dev *wdev); void brcmf_p2p_stop_device(struct wiphy *wiphy, struct wireless_dev *wdev); int brcmf_p2p_scan_prep(struct wiphy *wiphy, - struct cfg80211_scan_request *request); + struct cfg80211_scan_request *request, + struct brcmf_cfg80211_vif *vif); int brcmf_p2p_remain_on_channel(struct wiphy *wiphy, struct wireless_dev *wdev, struct ieee80211_channel *channel, unsigned int duration, u64 *cookie); diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index d792c3b2331a..c57c1dbb0daf 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -805,6 +805,12 @@ brcmf_cfg80211_escan(struct wiphy *wiphy, struct net_device *ndev, return -EAGAIN; } + /* If scan req comes for p2p0, send it over primary I/F */ + if (ifp->vif == cfg->p2p.bss_idx[P2PAPI_BSSCFG_DEVICE].vif) { + ifp = cfg->p2p.bss_idx[P2PAPI_BSSCFG_PRIMARY].vif->ifp; + ndev = ifp->ndev; + } + /* Arm scan timeout timer */ mod_timer(&cfg->escan_timeout, jiffies + WL_ESCAN_TIMER_INTERVAL_MS * HZ / 1000); @@ -824,7 +830,7 @@ brcmf_cfg80211_escan(struct wiphy *wiphy, struct net_device *ndev, set_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status); if (escan_req) { cfg->escan_info.run = brcmf_run_escan; - err = brcmf_p2p_scan_prep(wiphy, request); + err = brcmf_p2p_scan_prep(wiphy, request, ifp->vif); if (err) goto scan_out; From 7ee2d926002daa5779277360613f296f27d2127b Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Fri, 8 Feb 2013 15:53:43 +0100 Subject: [PATCH 090/209] brcmfmac: update p2p add and delete vif routines. Improve exception handling. Store and removed created vif in cfg.p2p.bss array. Fix big endian bug. Fix msec jiffies bug. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- .../wireless/brcm80211/brcmfmac/fwil_types.h | 2 +- drivers/net/wireless/brcm80211/brcmfmac/p2p.c | 33 ++++++++++++++----- 2 files changed, 25 insertions(+), 10 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h b/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h index d21d9b2201d8..7707194d4e7e 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h @@ -29,7 +29,7 @@ enum brcmf_fil_p2p_if_types { struct brcmf_fil_p2p_if_le { u8 addr[ETH_ALEN]; - enum brcmf_fil_p2p_if_types type; + __le16 type; __le16 chspec; }; diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c index aef0287f5857..d2cefb4c7d2a 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c @@ -739,7 +739,7 @@ static int brcmf_p2p_request_p2p_if(struct brcmf_if *ifp, u8 ea[ETH_ALEN], /* fill the firmware request */ memcpy(if_request.addr, ea, ETH_ALEN); - if_request.type = iftype; + if_request.type = cpu_to_le16((u16)iftype); if_request.chspec = cpu_to_le16(chanspec); err = brcmf_fil_iovar_data_set(ifp, "p2p_ifadd", &if_request, @@ -747,11 +747,6 @@ static int brcmf_p2p_request_p2p_if(struct brcmf_if *ifp, u8 ea[ETH_ALEN], if (err) return err; - if (iftype == BRCMF_FIL_P2P_IF_GO) { - /* set station timeout for p2p */ - err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_SCB_TIMEOUT, - BRCMF_SCB_TIMEOUT_VALUE); - } return err; } @@ -814,11 +809,15 @@ struct wireless_dev *brcmf_p2p_add_vif(struct wiphy *wiphy, const char *name, } vif = brcmf_alloc_vif(cfg, type, false); + if (IS_ERR(vif)) + return (struct wireless_dev *)vif; brcmf_cfg80211_arm_vif_event(cfg, vif); err = brcmf_p2p_request_p2p_if(ifp, cfg->p2p.int_addr, iftype); - if (err) + if (err) { + brcmf_cfg80211_arm_vif_event(cfg, NULL); goto fail; + } /* wait for firmware event */ err = brcmf_cfg80211_wait_vif_event_timeout(cfg, BRCMF_E_IF_ADD, @@ -835,10 +834,19 @@ struct wireless_dev *brcmf_p2p_add_vif(struct wiphy *wiphy, const char *name, if (!ifp) { brcmf_err("no if pointer provided\n"); err = -ENOENT; + goto fail; } strncpy(ifp->ndev->name, name, sizeof(ifp->ndev->name) - 1); brcmf_cfg80211_vif_complete(cfg); + cfg->p2p.bss_idx[P2PAPI_BSSCFG_CONNECTION].vif = vif; + /* Disable firmware roaming for P2P interface */ + brcmf_fil_iovar_int_set(ifp, "roam_off", 1); + if (iftype == BRCMF_FIL_P2P_IF_GO) { + /* set station timeout for p2p */ + brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_SCB_TIMEOUT, + BRCMF_SCB_TIMEOUT_VALUE); + } return &ifp->vif->wdev; fail: @@ -883,18 +891,25 @@ int brcmf_p2p_del_vif(struct wiphy *wiphy, struct wireless_dev *wdev) } if (wait_for_disable) - wait_for_completion_timeout(&cfg->vif_disabled, 500); + wait_for_completion_timeout(&cfg->vif_disabled, + msecs_to_jiffies(500)); brcmf_vif_clear_mgmt_ies(vif); brcmf_cfg80211_arm_vif_event(cfg, vif); err = brcmf_p2p_release_p2p_if(vif); - if (!err) + if (!err) { /* wait for firmware event */ err = brcmf_cfg80211_wait_vif_event_timeout(cfg, BRCMF_E_IF_DEL, jiffie_timeout); + if (!err) + err = -EIO; + else + err = 0; + } brcmf_cfg80211_arm_vif_event(cfg, NULL); brcmf_free_vif(vif); + cfg->p2p.bss_idx[P2PAPI_BSSCFG_CONNECTION].vif = NULL; return err; } From 7a5c1f64f64c8504c8117558a426b610ebc77aa0 Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Fri, 8 Feb 2013 15:53:44 +0100 Subject: [PATCH 091/209] brcmfmac: add p2p change vif routines. Add support for changing existing interface into p2p go interface. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- .../wireless/brcm80211/brcmfmac/dhd_linux.c | 1 + drivers/net/wireless/brcm80211/brcmfmac/p2p.c | 108 +++++++++++++++--- drivers/net/wireless/brcm80211/brcmfmac/p2p.h | 2 + .../wireless/brcm80211/brcmfmac/wl_cfg80211.c | 23 +++- .../wireless/brcm80211/brcmfmac/wl_cfg80211.h | 4 + 5 files changed, 120 insertions(+), 18 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c index b469bd19dfd0..451b89c83d2b 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c @@ -26,6 +26,7 @@ #include "dhd_bus.h" #include "dhd_proto.h" #include "dhd_dbg.h" +#include "fwil_types.h" #include "p2p.h" #include "wl_cfg80211.h" #include "fwil.h" diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c index d2cefb4c7d2a..fa0127e809ac 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c @@ -718,24 +718,105 @@ void brcmf_p2p_detach(struct brcmf_p2p_info *p2p) memset(p2p, 0, sizeof(*p2p)); } -static int brcmf_p2p_request_p2p_if(struct brcmf_if *ifp, u8 ea[ETH_ALEN], +/** + * brcmf_p2p_get_current_chanspec() - Get current operation channel. + * + * @p2p: P2P specific data. + * @chanspec: chanspec to be returned. + */ +static void brcmf_p2p_get_current_chanspec(struct brcmf_p2p_info *p2p, + u16 *chanspec) +{ + struct brcmf_if *ifp; + struct brcmf_fil_chan_info_le ci; + s32 err; + + ifp = p2p->bss_idx[P2PAPI_BSSCFG_PRIMARY].vif->ifp; + + *chanspec = 11 & WL_CHANSPEC_CHAN_MASK; + + err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_CHANNEL, &ci, sizeof(ci)); + if (!err) { + *chanspec = le32_to_cpu(ci.hw_channel) & WL_CHANSPEC_CHAN_MASK; + if (*chanspec < CH_MAX_2G_CHANNEL) + *chanspec |= WL_CHANSPEC_BAND_2G; + else + *chanspec |= WL_CHANSPEC_BAND_5G; + } + *chanspec |= WL_CHANSPEC_BW_20 | WL_CHANSPEC_CTL_SB_NONE; +} + +/** + * Change a P2P Role. + * Parameters: + * @mac: MAC address of the BSS to change a role + * Returns 0 if success. + */ +int brcmf_p2p_ifchange(struct brcmf_cfg80211_info *cfg, + enum brcmf_fil_p2p_if_types if_type) +{ + struct brcmf_p2p_info *p2p = &cfg->p2p; + struct brcmf_cfg80211_vif *vif; + struct brcmf_fil_p2p_if_le if_request; + s32 err; + u16 chanspec; + + brcmf_dbg(TRACE, "Enter\n"); + + vif = p2p->bss_idx[P2PAPI_BSSCFG_PRIMARY].vif; + if (!vif) { + brcmf_err("vif for P2PAPI_BSSCFG_PRIMARY does not exist\n"); + return -EPERM; + } + brcmf_notify_escan_complete(cfg, vif->ifp->ndev, true, true); + vif = p2p->bss_idx[P2PAPI_BSSCFG_CONNECTION].vif; + if (!vif) { + brcmf_err("vif for P2PAPI_BSSCFG_CONNECTION does not exist\n"); + return -EPERM; + } + brcmf_set_mpc(vif->ifp->ndev, 0); + + /* In concurrency case, STA may be already associated in a particular */ + /* channel. so retrieve the current channel of primary interface and */ + /* then start the virtual interface on that. */ + brcmf_p2p_get_current_chanspec(p2p, &chanspec); + + if_request.type = cpu_to_le16((u16)if_type); + if_request.chspec = cpu_to_le16(chanspec); + memcpy(if_request.addr, p2p->int_addr, sizeof(if_request.addr)); + + brcmf_cfg80211_arm_vif_event(cfg, vif); + err = brcmf_fil_iovar_data_set(vif->ifp, "p2p_ifupd", &if_request, + sizeof(if_request)); + if (err) { + brcmf_err("p2p_ifupd FAILED, err=%d\n", err); + brcmf_cfg80211_arm_vif_event(cfg, NULL); + return err; + } + err = brcmf_cfg80211_wait_vif_event_timeout(cfg, BRCMF_E_IF_CHANGE, + msecs_to_jiffies(1500)); + brcmf_cfg80211_arm_vif_event(cfg, NULL); + if (!err) { + brcmf_err("No BRCMF_E_IF_CHANGE event received\n"); + return -EIO; + } + + err = brcmf_fil_cmd_int_set(vif->ifp, BRCMF_C_SET_SCB_TIMEOUT, + BRCMF_SCB_TIMEOUT_VALUE); + + return err; +} + +static int brcmf_p2p_request_p2p_if(struct brcmf_p2p_info *p2p, + struct brcmf_if *ifp, u8 ea[ETH_ALEN], enum brcmf_fil_p2p_if_types iftype) { struct brcmf_fil_p2p_if_le if_request; - struct brcmf_fil_chan_info_le ci; - u16 chanspec = 11 & WL_CHANSPEC_CHAN_MASK; int err; + u16 chanspec; /* we need a default channel */ - err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_CHANNEL, &ci, sizeof(ci)); - if (!err) { - chanspec = le32_to_cpu(ci.hw_channel) & WL_CHANSPEC_CHAN_MASK; - if (chanspec < CH_MAX_2G_CHANNEL) - chanspec |= WL_CHANSPEC_BAND_2G; - else - chanspec |= WL_CHANSPEC_BAND_5G; - } - chanspec |= WL_CHANSPEC_BW_20 | WL_CHANSPEC_CTL_SB_NONE; + brcmf_p2p_get_current_chanspec(p2p, &chanspec); /* fill the firmware request */ memcpy(if_request.addr, ea, ETH_ALEN); @@ -813,7 +894,8 @@ struct wireless_dev *brcmf_p2p_add_vif(struct wiphy *wiphy, const char *name, return (struct wireless_dev *)vif; brcmf_cfg80211_arm_vif_event(cfg, vif); - err = brcmf_p2p_request_p2p_if(ifp, cfg->p2p.int_addr, iftype); + err = brcmf_p2p_request_p2p_if(&cfg->p2p, ifp, cfg->p2p.int_addr, + iftype); if (err) { brcmf_cfg80211_arm_vif_event(cfg, NULL); goto fail; diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.h b/drivers/net/wireless/brcm80211/brcmfmac/p2p.h index 1f97afd8709e..1bf57c180739 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.h @@ -108,6 +108,8 @@ struct wireless_dev *brcmf_p2p_add_vif(struct wiphy *wiphy, const char *name, enum nl80211_iftype type, u32 *flags, struct vif_params *params); int brcmf_p2p_del_vif(struct wiphy *wiphy, struct wireless_dev *wdev); +int brcmf_p2p_ifchange(struct brcmf_cfg80211_info *cfg, + enum brcmf_fil_p2p_if_types if_type); int brcmf_p2p_start_device(struct wiphy *wiphy, struct wireless_dev *wdev); void brcmf_p2p_stop_device(struct wiphy *wiphy, struct wireless_dev *wdev); int brcmf_p2p_scan_prep(struct wiphy *wiphy, diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index c57c1dbb0daf..27436f253162 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -26,6 +26,7 @@ #include #include "dhd.h" #include "dhd_dbg.h" +#include "fwil_types.h" #include "p2p.h" #include "wl_cfg80211.h" #include "fwil.h" @@ -445,7 +446,7 @@ static struct wireless_dev *brcmf_cfg80211_add_iface(struct wiphy *wiphy, } } -static void brcmf_set_mpc(struct net_device *ndev, int mpc) +void brcmf_set_mpc(struct net_device *ndev, int mpc) { struct brcmf_if *ifp = netdev_priv(ndev); s32 err = 0; @@ -460,7 +461,7 @@ static void brcmf_set_mpc(struct net_device *ndev, int mpc) } } -static s32 +s32 brcmf_notify_escan_complete(struct brcmf_cfg80211_info *cfg, struct net_device *ndev, bool aborted, bool fw_abort) @@ -567,6 +568,7 @@ brcmf_cfg80211_change_iface(struct wiphy *wiphy, struct net_device *ndev, enum nl80211_iftype type, u32 *flags, struct vif_params *params) { + struct brcmf_cfg80211_info *cfg = wiphy_priv(wiphy); struct brcmf_if *ifp = netdev_priv(ndev); struct brcmf_cfg80211_vif *vif = ifp->vif; s32 infra = 0; @@ -590,6 +592,7 @@ brcmf_cfg80211_change_iface(struct wiphy *wiphy, struct net_device *ndev, infra = 1; break; case NL80211_IFTYPE_AP: + case NL80211_IFTYPE_P2P_GO: vif->mode = WL_MODE_AP; ap = 1; break; @@ -599,8 +602,14 @@ brcmf_cfg80211_change_iface(struct wiphy *wiphy, struct net_device *ndev, } if (ap) { - set_bit(BRCMF_VIF_STATUS_AP_CREATING, &vif->sme_state); - brcmf_dbg(INFO, "IF Type = AP\n"); + if (type == NL80211_IFTYPE_P2P_GO) { + brcmf_dbg(INFO, "IF Type = P2P GO\n"); + err = brcmf_p2p_ifchange(cfg, BRCMF_FIL_P2P_IF_GO); + } + if (!err) { + set_bit(BRCMF_VIF_STATUS_AP_CREATING, &vif->sme_state); + brcmf_dbg(INFO, "IF Type = AP\n"); + } } else { err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_INFRA, infra); if (err) { @@ -4422,7 +4431,6 @@ static s32 brcmf_notify_vif_event(struct brcmf_if *ifp, ifevent->action, ifevent->flags, ifevent->ifidx, ifevent->bssidx); - mutex_lock(&event->vif_event_lock); event->action = ifevent->action; vif = event->vif; @@ -4453,6 +4461,11 @@ static s32 brcmf_notify_vif_event(struct brcmf_if *ifp, wake_up(&event->vif_wq); return 0; + case BRCMF_E_IF_CHANGE: + mutex_unlock(&event->vif_event_lock); + wake_up(&event->vif_wq); + return 0; + default: mutex_unlock(&event->vif_event_lock); break; diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h index 506818844a74..215530881539 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h @@ -492,5 +492,9 @@ bool brcmf_cfg80211_vif_event_armed(struct brcmf_cfg80211_info *cfg); int brcmf_cfg80211_wait_vif_event_timeout(struct brcmf_cfg80211_info *cfg, u8 action, ulong timeout); void brcmf_cfg80211_vif_complete(struct brcmf_cfg80211_info *info); +s32 brcmf_notify_escan_complete(struct brcmf_cfg80211_info *cfg, + struct net_device *ndev, + bool aborted, bool fw_abort); +void brcmf_set_mpc(struct net_device *ndev, int mpc); #endif /* _wl_cfg80211_h_ */ From 318a64cede8882964b6412aceebe657dab46b2d2 Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Fri, 8 Feb 2013 15:53:45 +0100 Subject: [PATCH 092/209] brcmfmac: Fix bug mgmt_rx_register Mask is OR-ed with value in case of deregister. Should be AND-ed. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 27436f253162..9a82dd443952 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -3742,7 +3742,7 @@ brcmf_cfg80211_mgmt_frame_register(struct wiphy *wiphy, if (reg) vif->mgmt_rx_reg |= BIT(mgmt_type); else - vif->mgmt_rx_reg |= ~BIT(mgmt_type); + vif->mgmt_rx_reg &= ~BIT(mgmt_type); } From 89286dc9452082c710e0767f3191b03421601214 Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Fri, 8 Feb 2013 15:53:46 +0100 Subject: [PATCH 093/209] brcmfmac: Update connect setup/handling routines for multiple bss. In preparation of p2p connections update the sta connect setup and handling routines. Use join iovar and bsscfg commands where applicable. Handle assoc ind per bsscfg (vif) and generalize vndr ie setup to support assoc IEs and support all setup types, e.g. sta, ap and p2p. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/dhd.h | 22 ++ .../wireless/brcm80211/brcmfmac/wl_cfg80211.c | 366 +++++++++++------- .../wireless/brcm80211/brcmfmac/wl_cfg80211.h | 2 + 3 files changed, 258 insertions(+), 132 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h index c4f30bd014dd..c4a6083fb1a0 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h @@ -377,6 +377,28 @@ struct brcmf_join_params { struct brcmf_assoc_params_le params_le; }; +/* scan params for extended join */ +struct brcmf_join_scan_params_le { + u8 scan_type; /* 0 use default, active or passive scan */ + __le32 nprobes; /* -1 use default, nr of probes per channel */ + __le32 active_time; /* -1 use default, dwell time per channel for + * active scanning + */ + __le32 passive_time; /* -1 use default, dwell time per channel + * for passive scanning + */ + __le32 home_time; /* -1 use default, dwell time for the home + * channel between channel scans + */ +}; + +/* extended join params */ +struct brcmf_ext_join_params_le { + struct brcmf_ssid_le ssid_le; /* {0, ""}: wildcard scan */ + struct brcmf_join_scan_params_le scan_le; + struct brcmf_assoc_params_le assoc_le; +}; + struct brcmf_wsec_key { u32 index; /* key index */ u32 len; /* key length */ diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 9a82dd443952..311226575583 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -49,6 +49,7 @@ #define WPA_OUI_TYPE 1 #define RSN_OUI "\x00\x0F\xAC" /* RSN OUI */ #define WME_OUI_TYPE 2 +#define WPS_OUI_TYPE 4 #define VS_IE_FIXED_HDR_LEN 6 #define WPA_IE_VERSION_LEN 2 @@ -79,6 +80,10 @@ #define DOT11_MGMT_HDR_LEN 24 /* d11 management header len */ #define DOT11_BCN_PRB_FIXED_LEN 12 /* beacon/probe fixed length */ +#define BRCMF_SCAN_JOIN_ACTIVE_DWELL_TIME_MS 320 +#define BRCMF_SCAN_JOIN_PASSIVE_DWELL_TIME_MS 400 +#define BRCMF_SCAN_JOIN_PROBE_INTERVAL_MS 20 + #define BRCMF_ASSOC_PARAMS_FIXED_SIZE \ (sizeof(struct brcmf_assoc_params_le) - sizeof(u16)) @@ -388,6 +393,86 @@ u16 channel_to_chanspec(struct ieee80211_channel *ch) return chanspec; } +/* Traverse a string of 1-byte tag/1-byte length/variable-length value + * triples, returning a pointer to the substring whose first element + * matches tag + */ +struct brcmf_tlv *brcmf_parse_tlvs(void *buf, int buflen, uint key) +{ + struct brcmf_tlv *elt; + int totlen; + + elt = (struct brcmf_tlv *)buf; + totlen = buflen; + + /* find tagged parameter */ + while (totlen >= TLV_HDR_LEN) { + int len = elt->len; + + /* validate remaining totlen */ + if ((elt->id == key) && (totlen >= (len + TLV_HDR_LEN))) + return elt; + + elt = (struct brcmf_tlv *)((u8 *)elt + (len + TLV_HDR_LEN)); + totlen -= (len + TLV_HDR_LEN); + } + + return NULL; +} + +/* Is any of the tlvs the expected entry? If + * not update the tlvs buffer pointer/length. + */ +static bool +brcmf_tlv_has_ie(u8 *ie, u8 **tlvs, u32 *tlvs_len, + u8 *oui, u32 oui_len, u8 type) +{ + /* If the contents match the OUI and the type */ + if (ie[TLV_LEN_OFF] >= oui_len + 1 && + !memcmp(&ie[TLV_BODY_OFF], oui, oui_len) && + type == ie[TLV_BODY_OFF + oui_len]) { + return true; + } + + if (tlvs == NULL) + return false; + /* point to the next ie */ + ie += ie[TLV_LEN_OFF] + TLV_HDR_LEN; + /* calculate the length of the rest of the buffer */ + *tlvs_len -= (int)(ie - *tlvs); + /* update the pointer to the start of the buffer */ + *tlvs = ie; + + return false; +} + +static struct brcmf_vs_tlv * +brcmf_find_wpaie(u8 *parse, u32 len) +{ + struct brcmf_tlv *ie; + + while ((ie = brcmf_parse_tlvs(parse, len, WLAN_EID_VENDOR_SPECIFIC))) { + if (brcmf_tlv_has_ie((u8 *)ie, &parse, &len, + WPA_OUI, TLV_OUI_LEN, WPA_OUI_TYPE)) + return (struct brcmf_vs_tlv *)ie; + } + return NULL; +} + +static struct brcmf_vs_tlv * +brcmf_find_wpsie(u8 *parse, u32 len) +{ + struct brcmf_tlv *ie; + + while ((ie = brcmf_parse_tlvs(parse, len, WLAN_EID_VENDOR_SPECIFIC))) { + if (brcmf_tlv_has_ie((u8 *)ie, &parse, &len, + WPA_OUI, TLV_OUI_LEN, WPS_OUI_TYPE)) + return (struct brcmf_vs_tlv *)ie; + } + return NULL; +} + + static void convert_key_from_CPU(struct brcmf_wsec_key *key, struct brcmf_wsec_key_le *key_le) { @@ -1201,7 +1286,7 @@ static s32 brcmf_set_wpa_version(struct net_device *ndev, else val = WPA_AUTH_DISABLED; brcmf_dbg(CONN, "setting wpa_auth to 0x%0x\n", val); - err = brcmf_fil_iovar_int_set(netdev_priv(ndev), "wpa_auth", val); + err = brcmf_fil_bsscfg_int_set(netdev_priv(ndev), "wpa_auth", val); if (err) { brcmf_err("set wpa_auth failed (%d)\n", err); return err; @@ -1240,7 +1325,7 @@ static s32 brcmf_set_auth_type(struct net_device *ndev, break; } - err = brcmf_fil_iovar_int_set(netdev_priv(ndev), "auth", val); + err = brcmf_fil_bsscfg_int_set(netdev_priv(ndev), "auth", val); if (err) { brcmf_err("set auth failed (%d)\n", err); return err; @@ -1304,7 +1389,12 @@ brcmf_set_set_cipher(struct net_device *ndev, } brcmf_dbg(CONN, "pval (%d) gval (%d)\n", pval, gval); - err = brcmf_fil_iovar_int_set(netdev_priv(ndev), "wsec", pval | gval); + /* In case of privacy, but no security and WPS then simulate */ + /* setting AES. WPS-2.0 allows no security */ + if (brcmf_find_wpsie(sme->ie, sme->ie_len) && !pval && !gval && + sme->privacy) + pval = AES_ENABLED; + err = brcmf_fil_bsscfg_int_set(netdev_priv(ndev), "wsec", pval | gval); if (err) { brcmf_err("error (%d)\n", err); return err; @@ -1326,8 +1416,8 @@ brcmf_set_key_mgmt(struct net_device *ndev, struct cfg80211_connect_params *sme) s32 err = 0; if (sme->crypto.n_akm_suites) { - err = brcmf_fil_iovar_int_get(netdev_priv(ndev), - "wpa_auth", &val); + err = brcmf_fil_bsscfg_int_get(netdev_priv(ndev), + "wpa_auth", &val); if (err) { brcmf_err("could not get wpa_auth (%d)\n", err); return err; @@ -1361,8 +1451,8 @@ brcmf_set_key_mgmt(struct net_device *ndev, struct cfg80211_connect_params *sme) } brcmf_dbg(CONN, "setting wpa_auth to %d\n", val); - err = brcmf_fil_iovar_int_set(netdev_priv(ndev), - "wpa_auth", val); + err = brcmf_fil_bsscfg_int_set(netdev_priv(ndev), + "wpa_auth", val); if (err) { brcmf_err("could not set wpa_auth (%d)\n", err); return err; @@ -1468,7 +1558,11 @@ brcmf_cfg80211_connect(struct wiphy *wiphy, struct net_device *ndev, struct ieee80211_channel *chan = sme->channel; struct brcmf_join_params join_params; size_t join_params_size; - struct brcmf_ssid ssid; + struct brcmf_tlv *rsn_ie; + struct brcmf_vs_tlv *wpa_ie; + void *ie; + u32 ie_len; + struct brcmf_ext_join_params_le *ext_join_params; u16 chanspec; s32 err = 0; @@ -1482,6 +1576,34 @@ brcmf_cfg80211_connect(struct wiphy *wiphy, struct net_device *ndev, return -EOPNOTSUPP; } + if (ifp->vif == cfg->p2p.bss_idx[P2PAPI_BSSCFG_PRIMARY].vif) { + /* A normal (non P2P) connection request setup. */ + ie = NULL; + ie_len = 0; + /* find the WPA_IE */ + wpa_ie = brcmf_find_wpaie((u8 *)sme->ie, sme->ie_len); + if (wpa_ie) { + ie = wpa_ie; + ie_len = wpa_ie->len + TLV_HDR_LEN; + } else { + /* find the RSN_IE */ + rsn_ie = brcmf_parse_tlvs((u8 *)sme->ie, sme->ie_len, + WLAN_EID_RSN); + if (rsn_ie) { + ie = rsn_ie; + ie_len = rsn_ie->len + TLV_HDR_LEN; + } + } + brcmf_fil_iovar_data_set(ifp, "wpaie", ie, ie_len); + } + + err = brcmf_vif_set_mgmt_ie(ifp->vif, BRCMF_VNDR_IE_ASSOCREQ_FLAG, + sme->ie, sme->ie_len); + if (err) + brcmf_err("Set Assoc REQ IE Failed\n"); + else + brcmf_dbg(TRACE, "Applied Vndr IEs for Assoc request\n"); + set_bit(BRCMF_VIF_STATUS_CONNECTING, &ifp->vif->sme_state); if (chan) { @@ -1528,20 +1650,78 @@ brcmf_cfg80211_connect(struct wiphy *wiphy, struct net_device *ndev, goto done; } + profile->ssid.SSID_len = min_t(u32, (u32)sizeof(profile->ssid.SSID), + (u32)sme->ssid_len); + memcpy(&profile->ssid.SSID, sme->ssid, profile->ssid.SSID_len); + if (profile->ssid.SSID_len < IEEE80211_MAX_SSID_LEN) { + profile->ssid.SSID[profile->ssid.SSID_len] = 0; + brcmf_dbg(CONN, "SSID \"%s\", len (%d)\n", profile->ssid.SSID, + profile->ssid.SSID_len); + } + + /* Join with specific BSSID and cached SSID + * If SSID is zero join based on BSSID only + */ + join_params_size = offsetof(struct brcmf_ext_join_params_le, assoc_le) + + offsetof(struct brcmf_assoc_params_le, chanspec_list); + if (cfg->channel) + join_params_size += sizeof(u16); + ext_join_params = kzalloc(join_params_size, GFP_KERNEL); + if (ext_join_params == NULL) { + err = -ENOMEM; + goto done; + } + ext_join_params->ssid_le.SSID_len = cpu_to_le32(profile->ssid.SSID_len); + memcpy(&ext_join_params->ssid_le.SSID, sme->ssid, + profile->ssid.SSID_len); + /*increase dwell time to receive probe response or detect Beacon + * from target AP at a noisy air only during connect command + */ + ext_join_params->scan_le.active_time = + cpu_to_le32(BRCMF_SCAN_JOIN_ACTIVE_DWELL_TIME_MS); + ext_join_params->scan_le.passive_time = + cpu_to_le32(BRCMF_SCAN_JOIN_PASSIVE_DWELL_TIME_MS); + /* Set up join scan parameters */ + ext_join_params->scan_le.scan_type = -1; + /* to sync with presence period of VSDB GO. + * Send probe request more frequently. Probe request will be stopped + * when it gets probe response from target AP/GO. + */ + ext_join_params->scan_le.nprobes = + cpu_to_le32(BRCMF_SCAN_JOIN_ACTIVE_DWELL_TIME_MS / + BRCMF_SCAN_JOIN_PROBE_INTERVAL_MS); + ext_join_params->scan_le.home_time = cpu_to_le32(-1); + + if (sme->bssid) + memcpy(&ext_join_params->assoc_le.bssid, sme->bssid, ETH_ALEN); + else + memset(&ext_join_params->assoc_le.bssid, 0xFF, ETH_ALEN); + + if (cfg->channel) { + ext_join_params->assoc_le.chanspec_num = cpu_to_le32(1); + + ext_join_params->assoc_le.chanspec_list[0] = + cpu_to_le16(chanspec); + } + + err = brcmf_fil_bsscfg_data_set(ifp, "join", ext_join_params, + join_params_size); + kfree(ext_join_params); + if (!err) + /* This is it. join command worked, we are done */ + goto done; + + /* join command failed, fallback to set ssid */ memset(&join_params, 0, sizeof(join_params)); join_params_size = sizeof(join_params.ssid_le); - profile->ssid.SSID_len = min_t(u32, - sizeof(ssid.SSID), (u32)sme->ssid_len); memcpy(&join_params.ssid_le.SSID, sme->ssid, profile->ssid.SSID_len); - memcpy(&profile->ssid.SSID, sme->ssid, profile->ssid.SSID_len); join_params.ssid_le.SSID_len = cpu_to_le32(profile->ssid.SSID_len); - memset(join_params.params_le.bssid, 0xFF, ETH_ALEN); - - if (ssid.SSID_len < IEEE80211_MAX_SSID_LEN) - brcmf_dbg(CONN, "ssid \"%s\", len (%d)\n", - ssid.SSID, ssid.SSID_len); + if (sme->bssid) + memcpy(join_params.params_le.bssid, sme->bssid, ETH_ALEN); + else + memset(join_params.params_le.bssid, 0xFF, ETH_ALEN); if (cfg->channel) { join_params.params_le.chanspec_list[0] = cpu_to_le16(chanspec); @@ -1551,7 +1731,7 @@ brcmf_cfg80211_connect(struct wiphy *wiphy, struct net_device *ndev, err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SET_SSID, &join_params, join_params_size); if (err) - brcmf_err("WLC_SET_SSID failed (%d)\n", err); + brcmf_err("BRCMF_C_SET_SSID failed (%d)\n", err); done: if (err) @@ -2010,7 +2190,7 @@ brcmf_cfg80211_get_station(struct wiphy *wiphy, struct net_device *ndev, goto done; } /* Report the current tx rate */ - err = brcmf_fil_cmd_int_get(ifp, BRCMF_C_GET_RATE, &rate); + err = brcmf_fil_cmd_int_get(ifp, BRCMF_C_GET_RATE, &rate); if (err) { brcmf_err("Could not get rate (%d)\n", err); goto done; @@ -2255,78 +2435,10 @@ static bool brcmf_is_ibssmode(struct brcmf_cfg80211_vif *vif) return vif->mode == WL_MODE_IBSS; } -/* - * Traverse a string of 1-byte tag/1-byte length/variable-length value - * triples, returning a pointer to the substring whose first element - * matches tag - */ -struct brcmf_tlv *brcmf_parse_tlvs(void *buf, int buflen, uint key) +static s32 brcmf_update_bss_info(struct brcmf_cfg80211_info *cfg, + struct brcmf_if *ifp) { - struct brcmf_tlv *elt; - int totlen; - - elt = (struct brcmf_tlv *) buf; - totlen = buflen; - - /* find tagged parameter */ - while (totlen >= TLV_HDR_LEN) { - int len = elt->len; - - /* validate remaining totlen */ - if ((elt->id == key) && (totlen >= (len + TLV_HDR_LEN))) - return elt; - - elt = (struct brcmf_tlv *) ((u8 *) elt + (len + TLV_HDR_LEN)); - totlen -= (len + TLV_HDR_LEN); - } - - return NULL; -} - -/* Is any of the tlvs the expected entry? If - * not update the tlvs buffer pointer/length. - */ -static bool -brcmf_tlv_has_ie(u8 *ie, u8 **tlvs, u32 *tlvs_len, - u8 *oui, u32 oui_len, u8 type) -{ - /* If the contents match the OUI and the type */ - if (ie[TLV_LEN_OFF] >= oui_len + 1 && - !memcmp(&ie[TLV_BODY_OFF], oui, oui_len) && - type == ie[TLV_BODY_OFF + oui_len]) { - return true; - } - - if (tlvs == NULL) - return false; - /* point to the next ie */ - ie += ie[TLV_LEN_OFF] + TLV_HDR_LEN; - /* calculate the length of the rest of the buffer */ - *tlvs_len -= (int)(ie - *tlvs); - /* update the pointer to the start of the buffer */ - *tlvs = ie; - - return false; -} - -static struct brcmf_vs_tlv * -brcmf_find_wpaie(u8 *parse, u32 len) -{ - struct brcmf_tlv *ie; - - while ((ie = brcmf_parse_tlvs(parse, len, WLAN_EID_VENDOR_SPECIFIC))) { - if (brcmf_tlv_has_ie((u8 *)ie, &parse, &len, - WPA_OUI, TLV_OUI_LEN, WPA_OUI_TYPE)) - return (struct brcmf_vs_tlv *)ie; - } - return NULL; -} - -static s32 brcmf_update_bss_info(struct brcmf_cfg80211_info *cfg) -{ - struct net_device *ndev = cfg_to_ndev(cfg); - struct brcmf_cfg80211_profile *profile = ndev_to_prof(ndev); - struct brcmf_if *ifp = netdev_priv(ndev); + struct brcmf_cfg80211_profile *profile = ndev_to_prof(ifp->ndev); struct brcmf_bss_info_le *bi; struct brcmf_ssid *ssid; struct brcmf_tlv *tim; @@ -3366,40 +3478,31 @@ s32 brcmf_vif_set_mgmt_ie(struct brcmf_cfg80211_vif *vif, s32 pktflag, if (!iovar_ie_buf) return -ENOMEM; curr_ie_buf = iovar_ie_buf; - if (ifp->vif->mode == WL_MODE_AP) { - switch (pktflag) { - case BRCMF_VNDR_IE_PRBRSP_FLAG: - mgmt_ie_buf = saved_ie->probe_res_ie; - mgmt_ie_len = &saved_ie->probe_res_ie_len; - mgmt_ie_buf_len = sizeof(saved_ie->probe_res_ie); - break; - case BRCMF_VNDR_IE_BEACON_FLAG: - mgmt_ie_buf = saved_ie->beacon_ie; - mgmt_ie_len = &saved_ie->beacon_ie_len; - mgmt_ie_buf_len = sizeof(saved_ie->beacon_ie); - break; - default: - err = -EPERM; - brcmf_err("not suitable type\n"); - goto exit; - } - } else { - switch (pktflag) { - case BRCMF_VNDR_IE_PRBREQ_FLAG: - mgmt_ie_buf = saved_ie->probe_req_ie; - mgmt_ie_len = &saved_ie->probe_req_ie_len; - mgmt_ie_buf_len = sizeof(saved_ie->probe_req_ie); - break; - case BRCMF_VNDR_IE_PRBRSP_FLAG: - mgmt_ie_buf = saved_ie->probe_res_ie; - mgmt_ie_len = &saved_ie->probe_res_ie_len; - mgmt_ie_buf_len = sizeof(saved_ie->probe_res_ie); - break; - default: - err = -EPERM; - brcmf_err("not suitable type\n"); - goto exit; - } + switch (pktflag) { + case BRCMF_VNDR_IE_PRBREQ_FLAG: + mgmt_ie_buf = saved_ie->probe_req_ie; + mgmt_ie_len = &saved_ie->probe_req_ie_len; + mgmt_ie_buf_len = sizeof(saved_ie->probe_req_ie); + break; + case BRCMF_VNDR_IE_PRBRSP_FLAG: + mgmt_ie_buf = saved_ie->probe_res_ie; + mgmt_ie_len = &saved_ie->probe_res_ie_len; + mgmt_ie_buf_len = sizeof(saved_ie->probe_res_ie); + break; + case BRCMF_VNDR_IE_BEACON_FLAG: + mgmt_ie_buf = saved_ie->beacon_ie; + mgmt_ie_len = &saved_ie->beacon_ie_len; + mgmt_ie_buf_len = sizeof(saved_ie->beacon_ie); + break; + case BRCMF_VNDR_IE_ASSOCREQ_FLAG: + mgmt_ie_buf = saved_ie->assoc_req_ie; + mgmt_ie_len = &saved_ie->assoc_req_ie_len; + mgmt_ie_buf_len = sizeof(saved_ie->assoc_req_ie); + break; + default: + err = -EPERM; + brcmf_err("not suitable type\n"); + goto exit; } if (vndr_ie_len > mgmt_ie_buf_len) { @@ -4138,9 +4241,9 @@ static void brcmf_clear_assoc_ies(struct brcmf_cfg80211_info *cfg) conn_info->resp_ie_len = 0; } -static s32 brcmf_get_assoc_ies(struct brcmf_cfg80211_info *cfg) +static s32 brcmf_get_assoc_ies(struct brcmf_cfg80211_info *cfg, + struct brcmf_if *ifp) { - struct brcmf_if *ifp = netdev_priv(cfg_to_ndev(cfg)); struct brcmf_cfg80211_assoc_ielen_le *assoc_info; struct brcmf_cfg80211_connect_info *conn_info = cfg_to_conn(cfg); u32 req_len; @@ -4216,9 +4319,9 @@ brcmf_bss_roaming_done(struct brcmf_cfg80211_info *cfg, brcmf_dbg(TRACE, "Enter\n"); - brcmf_get_assoc_ies(cfg); + brcmf_get_assoc_ies(cfg, ifp); memcpy(profile->bssid, e->addr, ETH_ALEN); - brcmf_update_bss_info(cfg); + brcmf_update_bss_info(cfg, ifp); buf = kzalloc(WL_BSS_INFO_MAX, GFP_KERNEL); if (buf == NULL) { @@ -4273,9 +4376,11 @@ brcmf_bss_connect_done(struct brcmf_cfg80211_info *cfg, if (test_and_clear_bit(BRCMF_VIF_STATUS_CONNECTING, &ifp->vif->sme_state)) { if (completed) { - brcmf_get_assoc_ies(cfg); + brcmf_get_assoc_ies(cfg, ifp); memcpy(profile->bssid, e->addr, ETH_ALEN); - brcmf_update_bss_info(cfg); + brcmf_update_bss_info(cfg, ifp); + set_bit(BRCMF_VIF_STATUS_CONNECTED, + &ifp->vif->sme_state); } cfg80211_connect_result(ndev, (u8 *)profile->bssid, @@ -4286,9 +4391,6 @@ brcmf_bss_connect_done(struct brcmf_cfg80211_info *cfg, completed ? WLAN_STATUS_SUCCESS : WLAN_STATUS_AUTH_TIMEOUT, GFP_KERNEL); - if (completed) - set_bit(BRCMF_VIF_STATUS_CONNECTED, - &ifp->vif->sme_state); brcmf_dbg(CONN, "Report connect result - connection %s\n", completed ? "succeeded" : "failed"); } diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h index 215530881539..259571269983 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h @@ -175,9 +175,11 @@ struct vif_saved_ie { u8 probe_req_ie[VNDR_IES_BUF_LEN]; u8 probe_res_ie[IE_MAX_LEN]; u8 beacon_ie[IE_MAX_LEN]; + u8 assoc_req_ie[IE_MAX_LEN]; u32 probe_req_ie_len; u32 probe_res_ie_len; u32 beacon_ie_len; + u32 assoc_req_ie_len; }; /** From a0f07959ee6e7f5be147ca4c3906b9d7fd173ea0 Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Fri, 8 Feb 2013 15:53:47 +0100 Subject: [PATCH 094/209] brcmfmac: Update AP mode for GO creation. With this update it is possible to create an P2P go. Handle the p2p go role in creation and the update beacon from cfg80211. Also store primary bss in global struct. Needed to map cfg device back to primary device. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- .../wireless/brcm80211/brcmfmac/fwil_types.h | 5 + drivers/net/wireless/brcm80211/brcmfmac/p2p.c | 6 +- drivers/net/wireless/brcm80211/brcmfmac/p2p.h | 3 +- .../wireless/brcm80211/brcmfmac/wl_cfg80211.c | 259 ++++++++++++------ 4 files changed, 185 insertions(+), 88 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h b/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h index 7707194d4e7e..2c4ca59c35cf 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h @@ -39,4 +39,9 @@ struct brcmf_fil_chan_info_le { __le32 scan_channel; }; +struct brcmf_fil_bss_enable_le { + __le32 bsscfg_idx; + __le32 enable; +}; + #endif /* FWIL_TYPES_H_ */ diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c index fa0127e809ac..d5f97117b266 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c @@ -691,15 +691,17 @@ void brcmf_p2p_cancel_remain_on_channel(struct brcmf_if *ifp) * * @cfg: driver private data for cfg80211 interface. */ -void brcmf_p2p_attach(struct brcmf_cfg80211_info *cfg) +void brcmf_p2p_attach(struct brcmf_cfg80211_info *cfg, + struct brcmf_cfg80211_vif *vif) { struct brcmf_p2p_info *p2p; p2p = &cfg->p2p; p2p->cfg = cfg; - brcmf_p2p_set_firmware(p2p); + p2p->bss_idx[P2PAPI_BSSCFG_PRIMARY].vif = vif; brcmf_p2p_generate_bss_mac(p2p); + brcmf_p2p_set_firmware(p2p); } /** diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.h b/drivers/net/wireless/brcm80211/brcmfmac/p2p.h index 1bf57c180739..4c1819c1fcc7 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.h @@ -102,7 +102,8 @@ struct brcmf_p2p_info { struct ieee80211_channel remain_on_channel; }; -void brcmf_p2p_attach(struct brcmf_cfg80211_info *cfg); +void brcmf_p2p_attach(struct brcmf_cfg80211_info *cfg, + struct brcmf_cfg80211_vif *vif); void brcmf_p2p_detach(struct brcmf_p2p_info *p2p); struct wireless_dev *brcmf_p2p_add_vif(struct wiphy *wiphy, const char *name, enum nl80211_iftype type, u32 *flags, diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 311226575583..c94d5361ca8f 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -3624,10 +3624,38 @@ s32 brcmf_vif_clear_mgmt_ies(struct brcmf_cfg80211_vif *vif) return 0; } +static s32 +brcmf_config_ap_mgmt_ie(struct brcmf_cfg80211_vif *vif, + struct cfg80211_beacon_data *beacon) +{ + s32 err; + + /* Set Beacon IEs to FW */ + err = brcmf_vif_set_mgmt_ie(vif, BRCMF_VNDR_IE_BEACON_FLAG, + beacon->tail, beacon->tail_len); + if (err) { + brcmf_err("Set Beacon IE Failed\n"); + return err; + } + brcmf_dbg(TRACE, "Applied Vndr IEs for Beacon\n"); + + /* Set Probe Response IEs to FW */ + err = brcmf_vif_set_mgmt_ie(vif, BRCMF_VNDR_IE_PRBRSP_FLAG, + beacon->proberesp_ies, + beacon->proberesp_ies_len); + if (err) + brcmf_err("Set Probe Resp IE Failed\n"); + else + brcmf_dbg(TRACE, "Applied Vndr IEs for Probe Resp\n"); + + return err; +} + static s32 brcmf_cfg80211_start_ap(struct wiphy *wiphy, struct net_device *ndev, struct cfg80211_ap_settings *settings) { + struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); s32 ie_offset; struct brcmf_if *ifp = netdev_priv(ndev); struct brcmf_tlv *ssid_ie; @@ -3636,6 +3664,8 @@ brcmf_cfg80211_start_ap(struct wiphy *wiphy, struct net_device *ndev, struct brcmf_tlv *rsn_ie; struct brcmf_vs_tlv *wpa_ie; struct brcmf_join_params join_params; + enum nl80211_iftype dev_role; + struct brcmf_fil_bss_enable_le bss_enable; brcmf_dbg(TRACE, "channel_type=%d, beacon_interval=%d, dtim_period=%d,\n", cfg80211_get_chandef_type(&settings->chandef), @@ -3645,9 +3675,21 @@ brcmf_cfg80211_start_ap(struct wiphy *wiphy, struct net_device *ndev, settings->ssid, settings->ssid_len, settings->auth_type, settings->inactivity_timeout); - if (!test_bit(BRCMF_VIF_STATUS_AP_CREATING, &ifp->vif->sme_state)) { - brcmf_err("Not in AP creation mode\n"); - return -EPERM; + if (ifp->vif == cfg->p2p.bss_idx[P2PAPI_BSSCFG_PRIMARY].vif) { + brcmf_dbg(TRACE, "Role = AP\n"); + dev_role = NL80211_IFTYPE_AP; + if (!test_bit(BRCMF_VIF_STATUS_AP_CREATING, + &ifp->vif->sme_state)) { + brcmf_err("Not in AP creation mode\n"); + return -EPERM; + } + } else { + brcmf_dbg(TRACE, "Role = P2P GO\n"); + dev_role = NL80211_IFTYPE_P2P_GO; + if (ifp->vif == cfg->p2p.bss_idx[P2PAPI_BSSCFG_DEVICE].vif) { + ifp = cfg->p2p.bss_idx[P2PAPI_BSSCFG_PRIMARY].vif->ifp; + ndev = ifp->ndev; + } } memset(&ssid_le, 0, sizeof(ssid_le)); @@ -3669,21 +3711,6 @@ brcmf_cfg80211_start_ap(struct wiphy *wiphy, struct net_device *ndev, } brcmf_set_mpc(ndev, 0); - err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_DOWN, 1); - if (err < 0) { - brcmf_err("BRCMF_C_DOWN error %d\n", err); - goto exit; - } - err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_INFRA, 1); - if (err < 0) { - brcmf_err("SET INFRA error %d\n", err); - goto exit; - } - err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_AP, 1); - if (err < 0) { - brcmf_err("setting AP mode failed %d\n", err); - goto exit; - } /* find the RSN_IE */ rsn_ie = brcmf_parse_tlvs((u8 *)settings->beacon.tail, @@ -3711,25 +3738,8 @@ brcmf_cfg80211_start_ap(struct wiphy *wiphy, struct net_device *ndev, brcmf_dbg(TRACE, "No WPA(2) IEs found\n"); brcmf_configure_opensecurity(ifp); } - /* Set Beacon IEs to FW */ - err = brcmf_vif_set_mgmt_ie(ndev_to_vif(ndev), - BRCMF_VNDR_IE_BEACON_FLAG, - settings->beacon.tail, - settings->beacon.tail_len); - if (err) - brcmf_err("Set Beacon IE Failed\n"); - else - brcmf_dbg(TRACE, "Applied Vndr IEs for Beacon\n"); - /* Set Probe Response IEs to FW */ - err = brcmf_vif_set_mgmt_ie(ndev_to_vif(ndev), - BRCMF_VNDR_IE_PRBRSP_FLAG, - settings->beacon.proberesp_ies, - settings->beacon.proberesp_ies_len); - if (err) - brcmf_err("Set Probe Resp IE Failed\n"); - else - brcmf_dbg(TRACE, "Applied Vndr IEs for Probe Resp\n"); + brcmf_config_ap_mgmt_ie(ifp->vif, &settings->beacon); if (settings->beacon_interval) { err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_BCNPRD, @@ -3747,23 +3757,62 @@ brcmf_cfg80211_start_ap(struct wiphy *wiphy, struct net_device *ndev, goto exit; } } - err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_UP, 1); - if (err < 0) { - brcmf_err("BRCMF_C_UP error (%d)\n", err); - goto exit; + + if (dev_role == NL80211_IFTYPE_AP) { + err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_DOWN, 1); + if (err < 0) { + brcmf_err("BRCMF_C_DOWN error %d\n", err); + goto exit; + } brcmf_fil_iovar_int_set(ifp, "apsta", 0); } - memset(&join_params, 0, sizeof(join_params)); - /* join parameters starts with ssid */ - memcpy(&join_params.ssid_le, &ssid_le, sizeof(ssid_le)); - /* create softap */ - err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SET_SSID, - &join_params, sizeof(join_params)); + err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_INFRA, 1); if (err < 0) { - brcmf_err("SET SSID error (%d)\n", err); + brcmf_err("SET INFRA error %d\n", err); goto exit; } + if (dev_role == NL80211_IFTYPE_AP) { + err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_AP, 1); + if (err < 0) { + brcmf_err("setting AP mode failed %d\n", err); + goto exit; + } + err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_UP, 1); + if (err < 0) { + brcmf_err("BRCMF_C_UP error (%d)\n", err); + goto exit; + } + + memset(&join_params, 0, sizeof(join_params)); + /* join parameters starts with ssid */ + memcpy(&join_params.ssid_le, &ssid_le, sizeof(ssid_le)); + /* create softap */ + err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SET_SSID, + &join_params, sizeof(join_params)); + if (err < 0) { + brcmf_err("SET SSID error (%d)\n", err); + goto exit; + } + brcmf_dbg(TRACE, "AP mode configuration complete\n"); + } else { + err = brcmf_fil_bsscfg_data_set(ifp, "ssid", &ssid_le, + sizeof(ssid_le)); + if (err < 0) { + brcmf_err("setting ssid failed %d\n", err); + goto exit; + } + bss_enable.bsscfg_idx = cpu_to_le32(ifp->bssidx); + bss_enable.enable = cpu_to_le32(1); + err = brcmf_fil_iovar_data_set(ifp, "bss", &bss_enable, + sizeof(bss_enable)); + if (err < 0) { + brcmf_err("bss_enable config failed %d\n", err); + goto exit; + } + + brcmf_dbg(TRACE, "GO mode configuration complete\n"); + } clear_bit(BRCMF_VIF_STATUS_AP_CREATING, &ifp->vif->sme_state); set_bit(BRCMF_VIF_STATUS_AP_CREATED, &ifp->vif->sme_state); @@ -3802,10 +3851,41 @@ exit: return err; } +static s32 +brcmf_cfg80211_change_beacon(struct wiphy *wiphy, struct net_device *ndev, + struct cfg80211_beacon_data *info) +{ + struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); + struct brcmf_if *ifp = netdev_priv(ndev); + s32 err; + + brcmf_dbg(TRACE, "Enter\n"); + + if (ifp->vif == cfg->p2p.bss_idx[P2PAPI_BSSCFG_PRIMARY].vif) { + brcmf_dbg(TRACE, "Role = AP\n"); + if (!test_bit(BRCMF_VIF_STATUS_AP_CREATED, + &ifp->vif->sme_state)) { + brcmf_err("AP was not yet created\n"); + return -EPERM; + } + } else { + brcmf_dbg(TRACE, "Role = P2P GO\n"); + if (ifp->vif == cfg->p2p.bss_idx[P2PAPI_BSSCFG_DEVICE].vif) { + ifp = cfg->p2p.bss_idx[P2PAPI_BSSCFG_PRIMARY].vif->ifp; + ndev = ifp->ndev; + } + } + + err = brcmf_config_ap_mgmt_ie(ifp->vif, info); + + return err; +} + static int brcmf_cfg80211_del_station(struct wiphy *wiphy, struct net_device *ndev, u8 *mac) { + struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); struct brcmf_scb_val_le scbval; struct brcmf_if *ifp = netdev_priv(ndev); s32 err; @@ -3815,6 +3895,8 @@ brcmf_cfg80211_del_station(struct wiphy *wiphy, struct net_device *ndev, brcmf_dbg(TRACE, "Enter %pM\n", mac); + if (ifp->vif == cfg->p2p.bss_idx[P2PAPI_BSSCFG_DEVICE].vif) + ifp = cfg->p2p.bss_idx[P2PAPI_BSSCFG_PRIMARY].vif->ifp; if (!check_vif_up(ifp->vif)) return -EIO; @@ -3824,7 +3906,12 @@ brcmf_cfg80211_del_station(struct wiphy *wiphy, struct net_device *ndev, &scbval, sizeof(scbval)); if (err) brcmf_err("SCB_DEAUTHENTICATE_FOR_REASON failed %d\n", err); - + /* + * Wait for the deauth event to come, supplicant will do the + * delete iface immediately and we will have problem in sending + * deauth frame if we delete the bss in firmware + */ + brcmf_delay(400); brcmf_dbg(TRACE, "Exit\n"); return err; } @@ -3857,6 +3944,7 @@ brcmf_cfg80211_mgmt_tx(struct wiphy *wiphy, struct wireless_dev *wdev, { struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); const struct ieee80211_mgmt *mgmt; + struct brcmf_if *ifp; struct brcmf_cfg80211_vif *vif; s32 err = 0; s32 ie_offset; @@ -3868,41 +3956,41 @@ brcmf_cfg80211_mgmt_tx(struct wiphy *wiphy, struct wireless_dev *wdev, mgmt = (const struct ieee80211_mgmt *)buf; - if (ieee80211_is_mgmt(mgmt->frame_control)) { - if (ieee80211_is_probe_resp(mgmt->frame_control)) { - /* Right now the only reason to get a probe response */ - /* is for p2p listen response from wpa_supplicant. */ - /* Unfortunately the wpa_supplicant sends it on the */ - /* primary ndev, while dongle wants it on the p2p */ - /* vif. Since this is only reason for a probe */ - /* response to be sent, the vif is taken from cfg. */ - /* If ever desired to send proberesp for non p2p */ - /* response then data should be checked for */ - /* "DIRECT-". Note in future supplicant will take */ - /* dedicated p2p wdev to do this and then this 'hack'*/ - /* is not needed anymore. */ - ie_offset = DOT11_MGMT_HDR_LEN + - DOT11_BCN_PRB_FIXED_LEN; - ie_len = len - ie_offset; - - vif = cfg->p2p.bss_idx[P2PAPI_BSSCFG_DEVICE].vif; - if (vif == NULL) { - brcmf_err("No p2p device available for probe response\n"); - err = -ENODEV; - goto exit; - } - err = brcmf_vif_set_mgmt_ie(vif, - BRCMF_VNDR_IE_PRBRSP_FLAG, - &buf[ie_offset], - ie_len); - cfg80211_mgmt_tx_status(wdev, *cookie, buf, len, true, - GFP_KERNEL); - goto exit; - } + if (!ieee80211_is_mgmt(mgmt->frame_control)) { + brcmf_err("Driver only allows MGMT packet type\n"); + return -EPERM; } - brcmf_dbg(TRACE, "Unhandled, is_mgmt %d, fc=%04x!!!!!\n", - ieee80211_is_mgmt(mgmt->frame_control), mgmt->frame_control); -exit: + + if (ieee80211_is_probe_resp(mgmt->frame_control)) { + /* Right now the only reason to get a probe response */ + /* is for p2p listen response or for p2p GO from */ + /* wpa_supplicant. Unfortunately the probe is send */ + /* on primary ndev, while dongle wants it on the p2p */ + /* vif. Since this is only reason for a probe */ + /* response to be sent, the vif is taken from cfg. */ + /* If ever desired to send proberesp for non p2p */ + /* response then data should be checked for */ + /* "DIRECT-". Note in future supplicant will take */ + /* dedicated p2p wdev to do this and then this 'hack'*/ + /* is not needed anymore. */ + ie_offset = DOT11_MGMT_HDR_LEN + + DOT11_BCN_PRB_FIXED_LEN; + ie_len = len - ie_offset; + ifp = netdev_priv(wdev->netdev); + vif = ifp->vif; + if (vif == cfg->p2p.bss_idx[P2PAPI_BSSCFG_PRIMARY].vif) + vif = cfg->p2p.bss_idx[P2PAPI_BSSCFG_DEVICE].vif; + err = brcmf_vif_set_mgmt_ie(vif, + BRCMF_VNDR_IE_PRBRSP_FLAG, + &buf[ie_offset], + ie_len); + cfg80211_mgmt_tx_status(wdev, *cookie, buf, len, true, + GFP_KERNEL); + } else { + brcmf_dbg(TRACE, "Unhandled, fc=%04x!!\n", mgmt->frame_control); + brcmf_dbg_hex_dump(true, buf, len, "payload, len=%Zu\n", len); + } + return err; } @@ -3946,8 +4034,8 @@ static s32 brcmf_notify_rx_mgmt_p2p_probereq(struct brcmf_if *ifp, "Enter: event %d reason %d\n", e->event_code, e->reason); /* Firmware sends us two proberesponses for each idx one. At the */ - /* moment only bsscfgidx 0 is passed up to supplicant */ - if (e->bsscfgidx) + /* moment anything but bsscfgidx 0 is passed up to supplicant */ + if (e->bsscfgidx == 0) return 0; /* Check if wpa_supplicant has registered for this frame */ @@ -3999,6 +4087,7 @@ static struct cfg80211_ops wl_cfg80211_ops = { .flush_pmksa = brcmf_cfg80211_flush_pmksa, .start_ap = brcmf_cfg80211_start_ap, .stop_ap = brcmf_cfg80211_stop_ap, + .change_beacon = brcmf_cfg80211_change_beacon, .del_station = brcmf_cfg80211_del_station, .sched_scan_start = brcmf_cfg80211_sched_scan_start, .sched_scan_stop = brcmf_cfg80211_sched_scan_stop, @@ -4727,7 +4816,7 @@ struct brcmf_cfg80211_info *brcmf_cfg80211_attach(struct brcmf_pub *drvr, brcmf_err("Failed to init iwm_priv (%d)\n", err); goto cfg80211_attach_out; } - brcmf_p2p_attach(cfg); + brcmf_p2p_attach(cfg, vif); ifp->vif = vif; return cfg; From e6da3400b34a063119b911b268d168441a1b80e9 Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Fri, 8 Feb 2013 15:53:48 +0100 Subject: [PATCH 095/209] brcmfmac: Add handling of receiving P2P action frames. Once wpa_supplicant has registered for P2P action frames all received action frames for the device are passed up to cfg80211. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/p2p.c | 345 ++++++++++++++++++ drivers/net/wireless/brcm80211/brcmfmac/p2p.h | 3 + .../wireless/brcm80211/brcmfmac/wl_cfg80211.c | 2 + 3 files changed, 350 insertions(+) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c index d5f97117b266..e5b1fb94a6d1 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c @@ -48,6 +48,38 @@ #define BRCMF_SCB_TIMEOUT_VALUE 20 +#define P2P_VER 9 /* P2P version: 9=WiFi P2P v1.0 */ +#define P2P_PUB_AF_CATEGORY 0x04 +#define P2P_PUB_AF_ACTION 0x09 +#define P2P_AF_CATEGORY 0x7f +#define P2P_OUI "\x50\x6F\x9A" /* P2P OUI */ +#define P2P_OUI_LEN 3 /* P2P OUI length */ + +/* WiFi P2P Public Action Frame OUI Subtypes */ +#define P2P_PAF_GON_REQ 0 /* Group Owner Negotiation Req */ +#define P2P_PAF_GON_RSP 1 /* Group Owner Negotiation Rsp */ +#define P2P_PAF_GON_CONF 2 /* Group Owner Negotiation Confirm */ +#define P2P_PAF_INVITE_REQ 3 /* P2P Invitation Request */ +#define P2P_PAF_INVITE_RSP 4 /* P2P Invitation Response */ +#define P2P_PAF_DEVDIS_REQ 5 /* Device Discoverability Request */ +#define P2P_PAF_DEVDIS_RSP 6 /* Device Discoverability Response */ +#define P2P_PAF_PROVDIS_REQ 7 /* Provision Discovery Request */ +#define P2P_PAF_PROVDIS_RSP 8 /* Provision Discovery Response */ +#define P2P_PAF_SUBTYPE_INVALID 255 /* Invalid Subtype */ + +/* WiFi P2P Action Frame OUI Subtypes */ +#define P2P_AF_NOTICE_OF_ABSENCE 0 /* Notice of Absence */ +#define P2P_AF_PRESENCE_REQ 1 /* P2P Presence Request */ +#define P2P_AF_PRESENCE_RSP 2 /* P2P Presence Response */ +#define P2P_AF_GO_DISC_REQ 3 /* GO Discoverability Request */ + +/* P2P Service Discovery related */ +#define P2PSD_ACTION_CATEGORY 0x04 /* Public action frame */ +#define P2PSD_ACTION_ID_GAS_IREQ 0x0a /* GAS Initial Request AF */ +#define P2PSD_ACTION_ID_GAS_IRESP 0x0b /* GAS Initial Response AF */ +#define P2PSD_ACTION_ID_GAS_CREQ 0x0c /* GAS Comback Request AF */ +#define P2PSD_ACTION_ID_GAS_CRESP 0x0d /* GAS Comback Response AF */ + /** * struct brcmf_p2p_disc_st_le - set discovery state in firmware. * @@ -91,6 +123,261 @@ struct brcmf_p2p_scan_le { }; }; +/** + * struct brcmf_p2p_pub_act_frame - WiFi P2P Public Action Frame + * + * @category: P2P_PUB_AF_CATEGORY + * @action: P2P_PUB_AF_ACTION + * @oui[3]: P2P_OUI + * @oui_type: OUI type - P2P_VER + * @subtype: OUI subtype - P2P_TYPE_* + * @dialog_token: nonzero, identifies req/rsp transaction + * @elts[1]: Variable length information elements. + */ +struct brcmf_p2p_pub_act_frame { + u8 category; + u8 action; + u8 oui[3]; + u8 oui_type; + u8 subtype; + u8 dialog_token; + u8 elts[1]; +}; + +/** + * struct brcmf_p2p_action_frame - WiFi P2P Action Frame + * + * @category: P2P_AF_CATEGORY + * @OUI[3]: OUI - P2P_OUI + * @type: OUI Type - P2P_VER + * @subtype: OUI Subtype - P2P_AF_* + * @dialog_token: nonzero, identifies req/resp tranaction + * @elts[1]: Variable length information elements. + */ +struct brcmf_p2p_action_frame { + u8 category; + u8 oui[3]; + u8 type; + u8 subtype; + u8 dialog_token; + u8 elts[1]; +}; + +/** + * struct brcmf_p2psd_gas_pub_act_frame - Wi-Fi GAS Public Action Frame + * + * @category: 0x04 Public Action Frame + * @action: 0x6c Advertisement Protocol + * @dialog_token: nonzero, identifies req/rsp transaction + * @query_data[1]: Query Data. SD gas ireq SD gas iresp + */ +struct brcmf_p2psd_gas_pub_act_frame { + u8 category; + u8 action; + u8 dialog_token; + u8 query_data[1]; +}; + + +/** + * brcmf_p2p_is_pub_action() - true if p2p public type frame. + * + * @frame: action frame data. + * @frame_len: length of action frame data. + * + * Determine if action frame is p2p public action type + */ +static bool brcmf_p2p_is_pub_action(void *frame, u32 frame_len) +{ + struct brcmf_p2p_pub_act_frame *pact_frm; + + if (frame == NULL) + return false; + + pact_frm = (struct brcmf_p2p_pub_act_frame *)frame; + if (frame_len < sizeof(struct brcmf_p2p_pub_act_frame) - 1) + return false; + + if (pact_frm->category == P2P_PUB_AF_CATEGORY && + pact_frm->action == P2P_PUB_AF_ACTION && + pact_frm->oui_type == P2P_VER && + memcmp(pact_frm->oui, P2P_OUI, P2P_OUI_LEN) == 0) + return true; + + return false; +} + +/** + * brcmf_p2p_is_p2p_action() - true if p2p action type frame. + * + * @frame: action frame data. + * @frame_len: length of action frame data. + * + * Determine if action frame is p2p action type + */ +static bool brcmf_p2p_is_p2p_action(void *frame, u32 frame_len) +{ + struct brcmf_p2p_action_frame *act_frm; + + if (frame == NULL) + return false; + + act_frm = (struct brcmf_p2p_action_frame *)frame; + if (frame_len < sizeof(struct brcmf_p2p_action_frame) - 1) + return false; + + if (act_frm->category == P2P_AF_CATEGORY && + act_frm->type == P2P_VER && + memcmp(act_frm->oui, P2P_OUI, P2P_OUI_LEN) == 0) + return true; + + return false; +} + +/** + * brcmf_p2p_is_gas_action() - true if p2p gas action type frame. + * + * @frame: action frame data. + * @frame_len: length of action frame data. + * + * Determine if action frame is p2p gas action type + */ +static bool brcmf_p2p_is_gas_action(void *frame, u32 frame_len) +{ + struct brcmf_p2psd_gas_pub_act_frame *sd_act_frm; + + if (frame == NULL) + return false; + + sd_act_frm = (struct brcmf_p2psd_gas_pub_act_frame *)frame; + if (frame_len < sizeof(struct brcmf_p2psd_gas_pub_act_frame) - 1) + return false; + + if (sd_act_frm->category != P2PSD_ACTION_CATEGORY) + return false; + + if (sd_act_frm->action == P2PSD_ACTION_ID_GAS_IREQ || + sd_act_frm->action == P2PSD_ACTION_ID_GAS_IRESP || + sd_act_frm->action == P2PSD_ACTION_ID_GAS_CREQ || + sd_act_frm->action == P2PSD_ACTION_ID_GAS_CRESP) + return true; + + return false; +} + +/** + * brcmf_p2p_print_actframe() - debug print routine. + * + * @tx: Received or to be transmitted + * @frame: action frame data. + * @frame_len: length of action frame data. + * + * Print information about the p2p action frame + */ +static void brcmf_p2p_print_actframe(bool tx, void *frame, u32 frame_len) +{ + struct brcmf_p2p_pub_act_frame *pact_frm; + struct brcmf_p2p_action_frame *act_frm; + struct brcmf_p2psd_gas_pub_act_frame *sd_act_frm; + + if (!frame || frame_len <= 2) + return; + + if (brcmf_p2p_is_pub_action(frame, frame_len)) { + pact_frm = (struct brcmf_p2p_pub_act_frame *)frame; + switch (pact_frm->subtype) { + case P2P_PAF_GON_REQ: + brcmf_dbg(TRACE, "%s P2P Group Owner Negotiation Req Frame\n", + (tx) ? "TX" : "RX"); + break; + case P2P_PAF_GON_RSP: + brcmf_dbg(TRACE, "%s P2P Group Owner Negotiation Rsp Frame\n", + (tx) ? "TX" : "RX"); + break; + case P2P_PAF_GON_CONF: + brcmf_dbg(TRACE, "%s P2P Group Owner Negotiation Confirm Frame\n", + (tx) ? "TX" : "RX"); + break; + case P2P_PAF_INVITE_REQ: + brcmf_dbg(TRACE, "%s P2P Invitation Request Frame\n", + (tx) ? "TX" : "RX"); + break; + case P2P_PAF_INVITE_RSP: + brcmf_dbg(TRACE, "%s P2P Invitation Response Frame\n", + (tx) ? "TX" : "RX"); + break; + case P2P_PAF_DEVDIS_REQ: + brcmf_dbg(TRACE, "%s P2P Device Discoverability Request Frame\n", + (tx) ? "TX" : "RX"); + break; + case P2P_PAF_DEVDIS_RSP: + brcmf_dbg(TRACE, "%s P2P Device Discoverability Response Frame\n", + (tx) ? "TX" : "RX"); + break; + case P2P_PAF_PROVDIS_REQ: + brcmf_dbg(TRACE, "%s P2P Provision Discovery Request Frame\n", + (tx) ? "TX" : "RX"); + break; + case P2P_PAF_PROVDIS_RSP: + brcmf_dbg(TRACE, "%s P2P Provision Discovery Response Frame\n", + (tx) ? "TX" : "RX"); + break; + default: + brcmf_dbg(TRACE, "%s Unknown P2P Public Action Frame\n", + (tx) ? "TX" : "RX"); + break; + } + } else if (brcmf_p2p_is_p2p_action(frame, frame_len)) { + act_frm = (struct brcmf_p2p_action_frame *)frame; + switch (act_frm->subtype) { + case P2P_AF_NOTICE_OF_ABSENCE: + brcmf_dbg(TRACE, "%s P2P Notice of Absence Frame\n", + (tx) ? "TX" : "RX"); + break; + case P2P_AF_PRESENCE_REQ: + brcmf_dbg(TRACE, "%s P2P Presence Request Frame\n", + (tx) ? "TX" : "RX"); + break; + case P2P_AF_PRESENCE_RSP: + brcmf_dbg(TRACE, "%s P2P Presence Response Frame\n", + (tx) ? "TX" : "RX"); + break; + case P2P_AF_GO_DISC_REQ: + brcmf_dbg(TRACE, "%s P2P Discoverability Request Frame\n", + (tx) ? "TX" : "RX"); + break; + default: + brcmf_dbg(TRACE, "%s Unknown P2P Action Frame\n", + (tx) ? "TX" : "RX"); + } + + } else if (brcmf_p2p_is_gas_action(frame, frame_len)) { + sd_act_frm = (struct brcmf_p2psd_gas_pub_act_frame *)frame; + switch (sd_act_frm->action) { + case P2PSD_ACTION_ID_GAS_IREQ: + brcmf_dbg(TRACE, "%s P2P GAS Initial Request\n", + (tx) ? "TX" : "RX"); + break; + case P2PSD_ACTION_ID_GAS_IRESP: + brcmf_dbg(TRACE, "%s P2P GAS Initial Response\n", + (tx) ? "TX" : "RX"); + break; + case P2PSD_ACTION_ID_GAS_CREQ: + brcmf_dbg(TRACE, "%s P2P GAS Comback Request\n", + (tx) ? "TX" : "RX"); + break; + case P2PSD_ACTION_ID_GAS_CRESP: + brcmf_dbg(TRACE, "%s P2P GAS Comback Response\n", + (tx) ? "TX" : "RX"); + break; + default: + brcmf_dbg(TRACE, "%s Unknown P2P GAS Frame\n", + (tx) ? "TX" : "RX"); + break; + } + } +} + /** * brcmf_p2p_set_firmware() - prepare firmware for peer-to-peer operation. * @@ -686,6 +973,64 @@ void brcmf_p2p_cancel_remain_on_channel(struct brcmf_if *ifp) } +/** + * brcmf_p2p_notify_action_frame_rx() - received action frame. + * + * @ifp: interfac control. + * @e: event message. Not used, to make it usable for fweh event dispatcher. + * @data: payload of message, containing action frame data. + * + */ +int brcmf_p2p_notify_action_frame_rx(struct brcmf_if *ifp, + const struct brcmf_event_msg *e, + void *data) +{ + struct wireless_dev *wdev; + u32 mgmt_frame_len = e->datalen - sizeof(struct brcmf_rx_mgmt_data); + struct brcmf_rx_mgmt_data *rxframe = (struct brcmf_rx_mgmt_data *)data; + u16 chanspec = be16_to_cpu(rxframe->chanspec); + struct ieee80211_mgmt *mgmt_frame; + s32 err; + s32 freq; + u16 mgmt_type; + + /* Check if wpa_supplicant has registered for this frame */ + brcmf_dbg(INFO, "ifp->vif->mgmt_rx_reg %04x\n", ifp->vif->mgmt_rx_reg); + mgmt_type = (IEEE80211_STYPE_ACTION & IEEE80211_FCTL_STYPE) >> 4; + if ((ifp->vif->mgmt_rx_reg & BIT(mgmt_type)) == 0) + return 0; + + brcmf_p2p_print_actframe(false, (u8 *)(rxframe + 1), mgmt_frame_len); + + mgmt_frame = kzalloc(offsetof(struct ieee80211_mgmt, u) + + mgmt_frame_len, GFP_KERNEL); + if (!mgmt_frame) { + brcmf_err("No memory available for action frame\n"); + return -ENOMEM; + } + memcpy(mgmt_frame->da, ifp->mac_addr, ETH_ALEN); + err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_BSSID, mgmt_frame->bssid, + ETH_ALEN); + if (err < 0) + brcmf_err("BRCMF_C_GET_BSSID error %d\n", err); + memcpy(mgmt_frame->sa, e->addr, ETH_ALEN); + mgmt_frame->frame_control = cpu_to_le16(IEEE80211_STYPE_ACTION); + memcpy(&mgmt_frame->u, (u8 *)(rxframe + 1), mgmt_frame_len); + mgmt_frame_len += offsetof(struct ieee80211_mgmt, u); + + freq = ieee80211_channel_to_frequency(CHSPEC_CHANNEL(chanspec), + CHSPEC_IS2G(chanspec) ? + IEEE80211_BAND_2GHZ : + IEEE80211_BAND_5GHZ); + wdev = ifp->ndev->ieee80211_ptr; + cfg80211_rx_mgmt(wdev, freq, 0, (u8 *)mgmt_frame, mgmt_frame_len, + GFP_ATOMIC); + + kfree(mgmt_frame); + return 0; +} + + /** * brcmf_p2p_attach() - attach for P2P. * diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.h b/drivers/net/wireless/brcm80211/brcmfmac/p2p.h index 4c1819c1fcc7..d247946fbec6 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.h @@ -123,5 +123,8 @@ int brcmf_p2p_notify_listen_complete(struct brcmf_if *ifp, const struct brcmf_event_msg *e, void *data); void brcmf_p2p_cancel_remain_on_channel(struct brcmf_if *ifp); +int brcmf_p2p_notify_action_frame_rx(struct brcmf_if *ifp, + const struct brcmf_event_msg *e, + void *data); #endif /* WL_CFGP2P_H_ */ diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index c94d5361ca8f..3914beb896a7 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -4701,6 +4701,8 @@ static void brcmf_register_event_handlers(struct brcmf_cfg80211_info *cfg) brcmf_notify_rx_mgmt_p2p_probereq); brcmf_fweh_register(cfg->pub, BRCMF_E_P2P_DISC_LISTEN_COMPLETE, brcmf_p2p_notify_listen_complete); + brcmf_fweh_register(cfg->pub, BRCMF_E_ACTION_FRAME_RX, + brcmf_p2p_notify_action_frame_rx); } static void brcmf_deinit_priv_mem(struct brcmf_cfg80211_info *cfg) From 18e2f61db3b708e0a22ccc403cb6ab2203d6faab Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Fri, 8 Feb 2013 15:53:49 +0100 Subject: [PATCH 096/209] brcmfmac: P2P action frame tx. With this patch it is possible to send action frames. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- .../wireless/brcm80211/brcmfmac/fwil_types.h | 19 ++ drivers/net/wireless/brcm80211/brcmfmac/p2p.c | 294 +++++++++++++++++- drivers/net/wireless/brcm80211/brcmfmac/p2p.h | 10 + .../wireless/brcm80211/brcmfmac/wl_cfg80211.c | 41 ++- .../wireless/brcm80211/brcmfmac/wl_cfg80211.h | 1 + 5 files changed, 361 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h b/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h index 2c4ca59c35cf..0f2c83bc95dc 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h @@ -20,6 +20,10 @@ #include + +#define BRCMF_FIL_ACTION_FRAME_SIZE 1800 + + enum brcmf_fil_p2p_if_types { BRCMF_FIL_P2P_IF_CLIENT, BRCMF_FIL_P2P_IF_GO, @@ -39,6 +43,21 @@ struct brcmf_fil_chan_info_le { __le32 scan_channel; }; +struct brcmf_fil_action_frame_le { + u8 da[ETH_ALEN]; + __le16 len; + __le32 packet_id; + u8 data[BRCMF_FIL_ACTION_FRAME_SIZE]; +}; + +struct brcmf_fil_af_params_le { + __le32 channel; + __le32 dwell_time; + u8 bssid[ETH_ALEN]; + u8 pad[2]; + struct brcmf_fil_action_frame_le action_frame; +}; + struct brcmf_fil_bss_enable_le { __le32 bsscfg_idx; __le32 enable; diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c index e5b1fb94a6d1..0c42910a6b36 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c @@ -55,6 +55,21 @@ #define P2P_OUI "\x50\x6F\x9A" /* P2P OUI */ #define P2P_OUI_LEN 3 /* P2P OUI length */ +/* Action Frame Constants */ +#define DOT11_ACTION_HDR_LEN 2 /* action frame category + action */ +#define DOT11_ACTION_CAT_OFF 0 /* category offset */ +#define DOT11_ACTION_ACT_OFF 1 /* action offset */ + +#define P2P_AF_DWELL_TIME 200 +#define P2P_AF_MIN_DWELL_TIME 100 +#define P2P_AF_MED_DWELL_TIME 400 +#define P2P_AF_LONG_DWELL_TIME 1000 +#define P2P_AF_TX_MAX_RETRY 5 +#define P2P_AF_MAX_WAIT_TIME 2000 +#define P2P_INVALID_CHANNEL -1 +#define P2P_CHANNEL_SYNC_RETRY 5 +#define P2P_AF_FRM_SCAN_MAX_WAIT 1500 + /* WiFi P2P Public Action Frame OUI Subtypes */ #define P2P_PAF_GON_REQ 0 /* Group Owner Negotiation Req */ #define P2P_PAF_GON_RSP 1 /* Group Owner Negotiation Rsp */ @@ -178,6 +193,17 @@ struct brcmf_p2psd_gas_pub_act_frame { u8 query_data[1]; }; +/** + * struct brcmf_config_af_params - Action Frame Parameters for tx. + * + * @max_tx_retry: max tx retry count if tx no ack. + * @mpc_onoff: To make sure to send successfully action frame, we have to + * turn off mpc 0: off, 1: on, (-1): do nothing + */ +struct brcmf_config_af_params { + s32 max_tx_retry; + s32 mpc_onoff; +}; /** * brcmf_p2p_is_pub_action() - true if p2p public type frame. @@ -590,8 +616,6 @@ static s32 brcmf_p2p_deinit_discovery(struct brcmf_p2p_info *p2p) * brcmf_p2p_enable_discovery() - initialize and configure discovery. * * @p2p: P2P specific data. - * @ie: buffer containing information elements. - * @ie_len: length of @ie buffer. * * Initializes the discovery device and configure the virtual interface. */ @@ -731,7 +755,7 @@ static s32 brcmf_p2p_escan(struct brcmf_p2p_info *p2p, u32 num_chans, /* Override scan params to find a peer for a connection */ if (num_chans == 1) { active = WL_SCAN_CONNECT_DWELL_TIME_MS; - /* XXX WAR to sync with presence period of VSDB GO. + /* WAR to sync with presence period of VSDB GO. * send probe request more frequently */ nprobes = active / WL_SCAN_JOIN_PROBE_INTERVAL_MS; @@ -1031,6 +1055,269 @@ int brcmf_p2p_notify_action_frame_rx(struct brcmf_if *ifp, } +/** + * brcmf_p2p_notify_action_tx_complete() - transmit action frame complete + * + * @ifp: interfac control. + * @e: event message. Not used, to make it usable for fweh event dispatcher. + * @data: not used. + * + */ +int brcmf_p2p_notify_action_tx_complete(struct brcmf_if *ifp, + const struct brcmf_event_msg *e, + void *data) +{ + struct brcmf_cfg80211_info *cfg = ifp->drvr->config; + struct brcmf_p2p_info *p2p = &cfg->p2p; + + brcmf_dbg(INFO, "Enter: status %d\n", e->status); + + if (e->status == BRCMF_E_STATUS_SUCCESS) + set_bit(BRCMF_P2P_STATUS_ACTION_TX_COMPLETED, &p2p->status); + else + set_bit(BRCMF_P2P_STATUS_ACTION_TX_NOACK, &p2p->status); + /* for now complete the receiver process here !! */ + complete(&p2p->send_af_done); + + return 0; +} + + +/** + * brcmf_p2p_tx_action_frame() - send action frame over fil. + * + * @p2p: p2p info struct for vif. + * @af_params: action frame data/info. + * + * Send an action frame immediately without doing channel synchronization. + * + * This function waits for a completion event before returning. + * The WLC_E_ACTION_FRAME_COMPLETE event will be received when the action + * frame is transmitted. + */ +static s32 brcmf_p2p_tx_action_frame(struct brcmf_p2p_info *p2p, + struct brcmf_fil_af_params_le *af_params) +{ + struct brcmf_cfg80211_vif *vif; + s32 err = 0; + s32 timeout = 0; + + brcmf_dbg(TRACE, "Enter\n"); + + clear_bit(BRCMF_P2P_STATUS_ACTION_TX_COMPLETED, &p2p->status); + clear_bit(BRCMF_P2P_STATUS_ACTION_TX_NOACK, &p2p->status); + + vif = p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif; + err = brcmf_fil_bsscfg_data_set(vif->ifp, "actframe", af_params, + sizeof(*af_params)); + if (err) { + brcmf_err(" sending action frame has failed\n"); + goto exit; + } + + timeout = wait_for_completion_timeout(&p2p->send_af_done, + msecs_to_jiffies(P2P_AF_MAX_WAIT_TIME)); + + if (test_bit(BRCMF_P2P_STATUS_ACTION_TX_COMPLETED, &p2p->status)) { + brcmf_dbg(TRACE, "TX action frame operation is success\n"); + } else { + err = -EIO; + brcmf_dbg(TRACE, "TX action frame operation has failed\n"); + } + /* clear status bit for action tx */ + clear_bit(BRCMF_P2P_STATUS_ACTION_TX_COMPLETED, &p2p->status); + clear_bit(BRCMF_P2P_STATUS_ACTION_TX_NOACK, &p2p->status); + +exit: + return err; +} + + +/** + * brcmf_p2p_pub_af_tx() - public action frame tx routine. + * + * @cfg: driver private data for cfg80211 interface. + * @af_params: action frame data/info. + * @config_af_params: configuration data for action frame. + * + * routine which transmits ation frame public type. + */ +static s32 brcmf_p2p_pub_af_tx(struct brcmf_cfg80211_info *cfg, + struct brcmf_fil_af_params_le *af_params, + struct brcmf_config_af_params *config_af_params) +{ + struct brcmf_p2p_info *p2p = &cfg->p2p; + struct brcmf_fil_action_frame_le *action_frame; + struct brcmf_p2p_pub_act_frame *act_frm; + s32 err = 0; + + action_frame = &af_params->action_frame; + act_frm = (struct brcmf_p2p_pub_act_frame *)(action_frame->data); + + switch (act_frm->subtype) { + case P2P_PAF_GON_REQ: + brcmf_dbg(TRACE, "P2P: GO_NEG_PHASE status set\n"); + set_bit(BRCMF_P2P_STATUS_GO_NEG_PHASE, &p2p->status); + config_af_params->mpc_onoff = 0; + p2p->next_af_subtype = act_frm->subtype + 1; + /* increase dwell time to wait for RESP frame */ + af_params->dwell_time = cpu_to_le32(P2P_AF_MED_DWELL_TIME); + break; + case P2P_PAF_GON_RSP: + p2p->next_af_subtype = act_frm->subtype + 1; + /* increase dwell time to wait for CONF frame */ + af_params->dwell_time = cpu_to_le32(P2P_AF_MED_DWELL_TIME); + break; + case P2P_PAF_GON_CONF: + /* If we reached till GO Neg confirmation reset the filter */ + brcmf_dbg(TRACE, "P2P: GO_NEG_PHASE status cleared\n"); + clear_bit(BRCMF_P2P_STATUS_GO_NEG_PHASE, &p2p->status); + /* turn on mpc again if go nego is done */ + config_af_params->mpc_onoff = 1; + /* minimize dwell time */ + af_params->dwell_time = cpu_to_le32(P2P_AF_MIN_DWELL_TIME); + break; + case P2P_PAF_INVITE_REQ: + p2p->next_af_subtype = act_frm->subtype + 1; + /* increase dwell time */ + af_params->dwell_time = cpu_to_le32(P2P_AF_MED_DWELL_TIME); + break; + case P2P_PAF_INVITE_RSP: + /* minimize dwell time */ + af_params->dwell_time = cpu_to_le32(P2P_AF_MIN_DWELL_TIME); + break; + case P2P_PAF_DEVDIS_REQ: + p2p->next_af_subtype = act_frm->subtype + 1; + /* maximize dwell time to wait for RESP frame */ + af_params->dwell_time = cpu_to_le32(P2P_AF_LONG_DWELL_TIME); + break; + case P2P_PAF_DEVDIS_RSP: + /* minimize dwell time */ + af_params->dwell_time = cpu_to_le32(P2P_AF_MIN_DWELL_TIME); + break; + case P2P_PAF_PROVDIS_REQ: + config_af_params->mpc_onoff = 0; + p2p->next_af_subtype = act_frm->subtype + 1; + /* increase dwell time to wait for RESP frame */ + af_params->dwell_time = cpu_to_le32(P2P_AF_MED_DWELL_TIME); + break; + case P2P_PAF_PROVDIS_RSP: + /* wpa_supplicant send go nego req right after prov disc */ + p2p->next_af_subtype = P2P_PAF_GON_REQ; + /* increase dwell time to MED level */ + af_params->dwell_time = cpu_to_le32(P2P_AF_MED_DWELL_TIME); + break; + default: + brcmf_err("Unknown p2p pub act frame subtype: %d\n", + act_frm->subtype); + err = -EINVAL; + } + return err; +} + +/** + * brcmf_p2p_send_action_frame() - send action frame . + * + * @cfg: driver private data for cfg80211 interface. + * @ndev: net device to transmit on. + * @af_params: configuration data for action frame. + */ +bool brcmf_p2p_send_action_frame(struct brcmf_cfg80211_info *cfg, + struct net_device *ndev, + struct brcmf_fil_af_params_le *af_params) +{ + struct brcmf_p2p_info *p2p = &cfg->p2p; + struct brcmf_fil_action_frame_le *action_frame; + struct brcmf_config_af_params config_af_params; + u16 action_frame_len; + bool ack = false; + u8 category; + u8 action; + s32 tx_retry; + + action_frame = &af_params->action_frame; + action_frame_len = le16_to_cpu(action_frame->len); + + brcmf_p2p_print_actframe(true, action_frame->data, action_frame_len); + + /* Add the default dwell time. Dwell time to stay off-channel */ + /* to wait for a response action frame after transmitting an */ + /* GO Negotiation action frame */ + af_params->dwell_time = cpu_to_le32(P2P_AF_DWELL_TIME); + + category = action_frame->data[DOT11_ACTION_CAT_OFF]; + action = action_frame->data[DOT11_ACTION_ACT_OFF]; + + /* initialize variables */ + p2p->next_af_subtype = P2P_PAF_SUBTYPE_INVALID; + + /* config parameters */ + config_af_params.max_tx_retry = P2P_AF_TX_MAX_RETRY; + config_af_params.mpc_onoff = -1; + + if (brcmf_p2p_is_pub_action(action_frame->data, action_frame_len)) { + /* p2p public action frame process */ + if (brcmf_p2p_pub_af_tx(cfg, af_params, &config_af_params)) { + /* Just send unknown subtype frame with */ + /* default parameters. */ + brcmf_err("P2P Public action frame, unknown subtype.\n"); + } + } else if (brcmf_p2p_is_gas_action(action_frame->data, + action_frame_len)) { + /* service discovery process */ + if (action == P2PSD_ACTION_ID_GAS_IREQ || + action == P2PSD_ACTION_ID_GAS_CREQ) { + /* save next af suptype to cancel */ + /* remaining dwell time */ + p2p->next_af_subtype = action + 1; + + af_params->dwell_time = + cpu_to_le32(P2P_AF_MED_DWELL_TIME); + } else if (action == P2PSD_ACTION_ID_GAS_IRESP || + action == P2PSD_ACTION_ID_GAS_CRESP) { + /* configure service discovery response frame */ + af_params->dwell_time = + cpu_to_le32(P2P_AF_MIN_DWELL_TIME); + } else { + brcmf_err("Unknown action type: %d\n", action); + goto exit; + } + } else if (brcmf_p2p_is_p2p_action(action_frame->data, + action_frame_len)) { + /* do not configure anything. it will be */ + /* sent with a default configuration */ + } else { + brcmf_err("Unknown Frame: category 0x%x, action 0x%x\n", + category, action); + return false; + } + + /* if scan is ongoing, abort current scan. */ + if (test_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status)) + brcmf_abort_scanning(cfg); + + /* To make sure to send successfully action frame, turn off mpc */ + if (config_af_params.mpc_onoff == 0) + brcmf_set_mpc(ndev, 0); + + /* if failed, retry it. tx_retry_max value is configure by .... */ + tx_retry = 0; + while ((ack == false) && (tx_retry < config_af_params.max_tx_retry)) { + ack = !brcmf_p2p_tx_action_frame(p2p, af_params); + tx_retry++; + } + if (ack == false) + brcmf_err("Failed to send Action Frame(retry %d)\n", tx_retry); + +exit: + /* if all done, turn mpc on again */ + if (config_af_params.mpc_onoff == 1) + brcmf_set_mpc(ndev, 1); + + return ack; +} + + /** * brcmf_p2p_attach() - attach for P2P. * @@ -1047,6 +1334,7 @@ void brcmf_p2p_attach(struct brcmf_cfg80211_info *cfg, p2p->bss_idx[P2PAPI_BSSCFG_PRIMARY].vif = vif; brcmf_p2p_generate_bss_mac(p2p); brcmf_p2p_set_firmware(p2p); + init_completion(&p2p->send_af_done); } /** diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.h b/drivers/net/wireless/brcm80211/brcmfmac/p2p.h index d247946fbec6..0610dcff43fc 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.h @@ -89,6 +89,8 @@ enum brcmf_p2p_status { * @ssid: ssid for P2P GO. * @listen_channel: channel for @WL_P2P_DISC_ST_LISTEN discover state. * @remain_on_channel: contains copy of struct used by cfg80211. + * @next_af_subtype: expected action frame subtype. + * @send_af_done: indication that action frame tx is complete. */ struct brcmf_p2p_info { struct brcmf_cfg80211_info *cfg; @@ -100,6 +102,8 @@ struct brcmf_p2p_info { struct brcmf_ssid ssid; u8 listen_channel; struct ieee80211_channel remain_on_channel; + u8 next_af_subtype; + struct completion send_af_done; }; void brcmf_p2p_attach(struct brcmf_cfg80211_info *cfg, @@ -126,5 +130,11 @@ void brcmf_p2p_cancel_remain_on_channel(struct brcmf_if *ifp); int brcmf_p2p_notify_action_frame_rx(struct brcmf_if *ifp, const struct brcmf_event_msg *e, void *data); +int brcmf_p2p_notify_action_tx_complete(struct brcmf_if *ifp, + const struct brcmf_event_msg *e, + void *data); +bool brcmf_p2p_send_action_frame(struct brcmf_cfg80211_info *cfg, + struct net_device *ndev, + struct brcmf_fil_af_params_le *af_params); #endif /* WL_CFGP2P_H_ */ diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 3914beb896a7..7ae84a0d5cf9 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -2494,7 +2494,7 @@ update_bss_info_out: return err; } -static void brcmf_abort_scanning(struct brcmf_cfg80211_info *cfg) +void brcmf_abort_scanning(struct brcmf_cfg80211_info *cfg) { struct escan_info *escan = &cfg->escan_info; @@ -3949,6 +3949,10 @@ brcmf_cfg80211_mgmt_tx(struct wiphy *wiphy, struct wireless_dev *wdev, s32 err = 0; s32 ie_offset; s32 ie_len; + struct brcmf_fil_action_frame_le *action_frame; + struct brcmf_fil_af_params_le *af_params; + bool ack; + s32 chan_nr; brcmf_dbg(TRACE, "Enter\n"); @@ -3986,11 +3990,44 @@ brcmf_cfg80211_mgmt_tx(struct wiphy *wiphy, struct wireless_dev *wdev, ie_len); cfg80211_mgmt_tx_status(wdev, *cookie, buf, len, true, GFP_KERNEL); + } else if (ieee80211_is_action(mgmt->frame_control)) { + af_params = kzalloc(sizeof(*af_params), GFP_KERNEL); + if (af_params == NULL) { + brcmf_err("unable to allocate frame\n"); + err = -ENOMEM; + goto exit; + } + action_frame = &af_params->action_frame; + /* Add the packet Id */ + action_frame->packet_id = cpu_to_le32(*cookie); + /* Add BSSID */ + memcpy(&action_frame->da[0], &mgmt->da[0], ETH_ALEN); + memcpy(&af_params->bssid[0], &mgmt->bssid[0], ETH_ALEN); + /* Add the length exepted for 802.11 header */ + action_frame->len = cpu_to_le16(len - DOT11_MGMT_HDR_LEN); + /* Add the channel */ + chan_nr = ieee80211_frequency_to_channel(chan->center_freq); + af_params->channel = cpu_to_le32(chan_nr); + + memcpy(action_frame->data, &buf[DOT11_MGMT_HDR_LEN], + le16_to_cpu(action_frame->len)); + + brcmf_dbg(TRACE, "Action frame, cookie=%lld, len=%d, freq=%d\n", + *cookie, le16_to_cpu(action_frame->len), + chan->center_freq); + + ack = brcmf_p2p_send_action_frame(cfg, wdev->netdev, + af_params); + + cfg80211_mgmt_tx_status(wdev, *cookie, buf, len, ack, + GFP_KERNEL); + kfree(af_params); } else { brcmf_dbg(TRACE, "Unhandled, fc=%04x!!\n", mgmt->frame_control); brcmf_dbg_hex_dump(true, buf, len, "payload, len=%Zu\n", len); } +exit: return err; } @@ -4703,6 +4740,8 @@ static void brcmf_register_event_handlers(struct brcmf_cfg80211_info *cfg) brcmf_p2p_notify_listen_complete); brcmf_fweh_register(cfg->pub, BRCMF_E_ACTION_FRAME_RX, brcmf_p2p_notify_action_frame_rx); + brcmf_fweh_register(cfg->pub, BRCMF_E_ACTION_FRAME_COMPLETE, + brcmf_p2p_notify_action_tx_complete); } static void brcmf_deinit_priv_mem(struct brcmf_cfg80211_info *cfg) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h index 259571269983..a020555a338b 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h @@ -498,5 +498,6 @@ s32 brcmf_notify_escan_complete(struct brcmf_cfg80211_info *cfg, struct net_device *ndev, bool aborted, bool fw_abort); void brcmf_set_mpc(struct net_device *ndev, int mpc); +void brcmf_abort_scanning(struct brcmf_cfg80211_info *cfg); #endif /* _wl_cfg80211_h_ */ From f2058dde8c2be70cc22dbd8f718ab6c33cf6ea11 Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Fri, 8 Feb 2013 15:53:50 +0100 Subject: [PATCH 097/209] brcmfmac: Use real cookie value for p2p remain on channel. In some rare situations the wpa_supplicant can lock up on a remain on channel command. Use actual cookies for the remain on channel related commands and allow for additional remain on channel while still having one set. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/p2p.c | 61 ++++++++++++++----- drivers/net/wireless/brcm80211/brcmfmac/p2p.h | 6 +- 2 files changed, 51 insertions(+), 16 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c index 0c42910a6b36..aac054cc0069 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c @@ -912,6 +912,47 @@ int brcmf_p2p_scan_prep(struct wiphy *wiphy, } +/** + * brcmf_p2p_discover_listen() - set firmware to discover listen state. + * + * @p2p: p2p device. + * @freq: center frequency for discover listen. + * #@duration: time in ms to stay on channel. + * + */ +static s32 +brcmf_p2p_discover_listen(struct brcmf_p2p_info *p2p, + struct ieee80211_channel *channel, u32 duration) +{ + struct brcmf_cfg80211_vif *vif; + s32 err = 0; + u16 chanspec; + + vif = p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif; + if (!vif) { + brcmf_err("Discovery is not set, so we have nothing to do\n"); + err = -EPERM; + goto exit; + } + + if (test_bit(BRCMF_P2P_STATUS_DISCOVER_LISTEN, &p2p->status)) { + brcmf_err("Previous LISTEN is not completed yet\n"); + /* WAR: prevent cookie mismatch in wpa_supplicant return OK */ + goto exit; + } + + chanspec = channel_to_chanspec(channel); + err = brcmf_p2p_set_discover_state(vif->ifp, WL_P2P_DISC_ST_LISTEN, + chanspec, (u16)duration); + if (!err) { + set_bit(BRCMF_P2P_STATUS_DISCOVER_LISTEN, &p2p->status); + p2p->remain_on_channel_cookie++; + } +exit: + return err; +} + + /** * brcmf_p2p_remain_on_channel() - put device on channel and stay there. * @@ -926,30 +967,21 @@ int brcmf_p2p_remain_on_channel(struct wiphy *wiphy, struct wireless_dev *wdev, { struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); struct brcmf_p2p_info *p2p = &cfg->p2p; - struct brcmf_cfg80211_vif *vif; s32 err; - u16 chanspec; brcmf_dbg(TRACE, "Enter, channel: %d, duration ms (%d)\n", ieee80211_frequency_to_channel(channel->center_freq), duration); - *cookie = 0; err = brcmf_p2p_enable_discovery(p2p); if (err) goto exit; - - chanspec = channel_to_chanspec(channel); - vif = p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif; - err = brcmf_p2p_set_discover_state(vif->ifp, WL_P2P_DISC_ST_LISTEN, - chanspec, (u16)duration); + err = brcmf_p2p_discover_listen(p2p, channel, duration); if (err) goto exit; - memcpy(&p2p->remain_on_channel, channel, - sizeof(p2p->remain_on_channel)); - - set_bit(BRCMF_P2P_STATUS_REMAIN_ON_CHANNEL, &p2p->status); + memcpy(&p2p->remain_on_channel, channel, sizeof(*channel)); + *cookie = p2p->remain_on_channel_cookie; exit: cfg80211_ready_on_channel(wdev, *cookie, channel, duration, GFP_KERNEL); @@ -973,9 +1005,10 @@ int brcmf_p2p_notify_listen_complete(struct brcmf_if *ifp, struct brcmf_p2p_info *p2p = &cfg->p2p; brcmf_dbg(TRACE, "Enter\n"); - if (test_and_clear_bit(BRCMF_P2P_STATUS_REMAIN_ON_CHANNEL, + if (test_and_clear_bit(BRCMF_P2P_STATUS_DISCOVER_LISTEN, &p2p->status)) - cfg80211_remain_on_channel_expired(&ifp->vif->wdev, 0, + cfg80211_remain_on_channel_expired(&ifp->vif->wdev, + p2p->remain_on_channel_cookie, &p2p->remain_on_channel, GFP_KERNEL); return 0; diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.h b/drivers/net/wireless/brcm80211/brcmfmac/p2p.h index 0610dcff43fc..0594018a7f9e 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.h @@ -63,7 +63,7 @@ struct p2p_bss { * @BRCMF_P2P_STATUS_ACTION_TX_COMPLETED: action frame tx completed. * @BRCMF_P2P_STATUS_ACTION_TX_NOACK: action frame tx not acked. * @BRCMF_P2P_STATUS_GO_NEG_PHASE: P2P GO negotiation ongoing. - * @BRCMF_P2P_STATUS_REMAIN_ON_CHANNEL: P2P listen, remaining on channel. + * @BRCMF_P2P_STATUS_DISCOVER_LISTEN: P2P listen, remaining on channel. */ enum brcmf_p2p_status { BRCMF_P2P_STATUS_IF_ADD = 0, @@ -74,7 +74,7 @@ enum brcmf_p2p_status { BRCMF_P2P_STATUS_ACTION_TX_COMPLETED, BRCMF_P2P_STATUS_ACTION_TX_NOACK, BRCMF_P2P_STATUS_GO_NEG_PHASE, - BRCMF_P2P_STATUS_REMAIN_ON_CHANNEL + BRCMF_P2P_STATUS_DISCOVER_LISTEN }; /** @@ -89,6 +89,7 @@ enum brcmf_p2p_status { * @ssid: ssid for P2P GO. * @listen_channel: channel for @WL_P2P_DISC_ST_LISTEN discover state. * @remain_on_channel: contains copy of struct used by cfg80211. + * @remain_on_channel_cookie: cookie counter for remain on channel cmd * @next_af_subtype: expected action frame subtype. * @send_af_done: indication that action frame tx is complete. */ @@ -102,6 +103,7 @@ struct brcmf_p2p_info { struct brcmf_ssid ssid; u8 listen_channel; struct ieee80211_channel remain_on_channel; + u32 remain_on_channel_cookie; u8 next_af_subtype; struct completion send_af_done; }; From 1ce3086ccd81793fd6affb350826a0c41dc3ef37 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Fri, 8 Feb 2013 15:53:51 +0100 Subject: [PATCH 098/209] brcmfmac: change function signatures cfg80211 api change needs to be applied. this change will be squashed with introducing commit: commit 68751daec95b07a74b18aa22b2f9c196991dbe81 Author: Hante Meuleman Date: Mon Nov 26 12:21:27 2012 +0100 brcmfmac: add support for P2P listen mode. Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/p2p.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c index aac054cc0069..1c854f607d5b 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c @@ -982,9 +982,9 @@ int brcmf_p2p_remain_on_channel(struct wiphy *wiphy, struct wireless_dev *wdev, memcpy(&p2p->remain_on_channel, channel, sizeof(*channel)); *cookie = p2p->remain_on_channel_cookie; + cfg80211_ready_on_channel(wdev, *cookie, channel, duration, GFP_KERNEL); exit: - cfg80211_ready_on_channel(wdev, *cookie, channel, duration, GFP_KERNEL); return err; } From 2fde59d93f8ac5525213996b5e98efb8f4d8c88c Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Fri, 8 Feb 2013 15:53:52 +0100 Subject: [PATCH 099/209] brcmfmac: Create p2p0 netdev via module variable. Add module variable with which a p2p0 netdev can be created. This netdev can be used by wpa-supplicant to configure and set up the p2p client/GO. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- .../wireless/brcm80211/brcmfmac/dhd_linux.c | 109 +++++++-- drivers/net/wireless/brcm80211/brcmfmac/p2p.c | 226 +++++++++--------- drivers/net/wireless/brcm80211/brcmfmac/p2p.h | 6 +- .../wireless/brcm80211/brcmfmac/wl_cfg80211.c | 12 +- 4 files changed, 213 insertions(+), 140 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c index 451b89c83d2b..65176c620aa6 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c @@ -42,6 +42,12 @@ MODULE_LICENSE("Dual BSD/GPL"); int brcmf_msg_level; module_param(brcmf_msg_level, int, 0); +/* P2P0 enable */ +static int brcmf_p2p_enable; +#ifdef CONFIG_BRCMDBG +module_param_named(p2pon, brcmf_p2p_enable, int, 0); +MODULE_PARM_DESC(p2pon, "enable p2p management functionality"); +#endif char *brcmf_ifname(struct brcmf_pub *drvr, int ifidx) { @@ -593,16 +599,6 @@ static const struct net_device_ops brcmf_netdev_ops_pri = { .ndo_set_rx_mode = brcmf_netdev_set_multicast_list }; -static const struct net_device_ops brcmf_netdev_ops_virt = { - .ndo_open = brcmf_cfg80211_up, - .ndo_stop = brcmf_cfg80211_down, - .ndo_get_stats = brcmf_netdev_get_stats, - .ndo_do_ioctl = brcmf_netdev_ioctl_entry, - .ndo_start_xmit = brcmf_netdev_start_xmit, - .ndo_set_mac_address = brcmf_netdev_set_mac_address, - .ndo_set_rx_mode = brcmf_netdev_set_multicast_list -}; - int brcmf_net_attach(struct brcmf_if *ifp) { struct brcmf_pub *drvr = ifp->drvr; @@ -613,10 +609,7 @@ int brcmf_net_attach(struct brcmf_if *ifp) ndev = ifp->ndev; /* set appropriate operations */ - if (!ifp->bssidx) - ndev->netdev_ops = &brcmf_netdev_ops_pri; - else - ndev->netdev_ops = &brcmf_netdev_ops_virt; + ndev->netdev_ops = &brcmf_netdev_ops_pri; ndev->hard_header_len = ETH_HLEN + drvr->hdrlen; ndev->ethtool_ops = &brcmf_ethtool_ops; @@ -627,6 +620,9 @@ int brcmf_net_attach(struct brcmf_if *ifp) /* set the mac address */ memcpy(ndev->dev_addr, ifp->mac_addr, ETH_ALEN); + INIT_WORK(&ifp->setmacaddr_work, _brcmf_set_mac_address); + INIT_WORK(&ifp->multicast_work, _brcmf_set_multicast_list); + if (register_netdev(ndev) != 0) { brcmf_err("couldn't register the net device\n"); goto fail; @@ -641,6 +637,69 @@ fail: return -EBADE; } +static int brcmf_net_p2p_open(struct net_device *ndev) +{ + brcmf_dbg(TRACE, "Enter\n"); + + return brcmf_cfg80211_up(ndev); +} + +static int brcmf_net_p2p_stop(struct net_device *ndev) +{ + brcmf_dbg(TRACE, "Enter\n"); + + return brcmf_cfg80211_down(ndev); +} + +static int brcmf_net_p2p_do_ioctl(struct net_device *ndev, + struct ifreq *ifr, int cmd) +{ + brcmf_dbg(TRACE, "Enter\n"); + return 0; +} + +static netdev_tx_t brcmf_net_p2p_start_xmit(struct sk_buff *skb, + struct net_device *ndev) +{ + if (skb) + dev_kfree_skb_any(skb); + + return NETDEV_TX_OK; +} + +static const struct net_device_ops brcmf_netdev_ops_p2p = { + .ndo_open = brcmf_net_p2p_open, + .ndo_stop = brcmf_net_p2p_stop, + .ndo_do_ioctl = brcmf_net_p2p_do_ioctl, + .ndo_start_xmit = brcmf_net_p2p_start_xmit +}; + +static int brcmf_net_p2p_attach(struct brcmf_if *ifp) +{ + struct net_device *ndev; + + brcmf_dbg(TRACE, "Enter, idx=%d mac=%pM\n", ifp->bssidx, + ifp->mac_addr); + ndev = ifp->ndev; + + ndev->netdev_ops = &brcmf_netdev_ops_p2p; + + /* set the mac address */ + memcpy(ndev->dev_addr, ifp->mac_addr, ETH_ALEN); + + if (register_netdev(ndev) != 0) { + brcmf_err("couldn't register the p2p net device\n"); + goto fail; + } + + brcmf_dbg(INFO, "%s: Broadcom Dongle Host Driver\n", ndev->name); + + return 0; + +fail: + return -EBADE; +} + struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, s32 bssidx, s32 ifidx, char *name, u8 *mac_addr) { @@ -682,8 +741,6 @@ struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, s32 bssidx, s32 ifidx, ifp->ifidx = ifidx; ifp->bssidx = bssidx; - INIT_WORK(&ifp->setmacaddr_work, _brcmf_set_mac_address); - INIT_WORK(&ifp->multicast_work, _brcmf_set_multicast_list); init_waitqueue_head(&ifp->pend_8021x_wait); @@ -717,8 +774,10 @@ void brcmf_del_if(struct brcmf_pub *drvr, s32 bssidx) netif_stop_queue(ifp->ndev); } - cancel_work_sync(&ifp->setmacaddr_work); - cancel_work_sync(&ifp->multicast_work); + if (ifp->ndev->netdev_ops == &brcmf_netdev_ops_pri) { + cancel_work_sync(&ifp->setmacaddr_work); + cancel_work_sync(&ifp->multicast_work); + } unregister_netdev(ifp->ndev); drvr->iflist[bssidx] = NULL; @@ -776,6 +835,7 @@ int brcmf_bus_start(struct device *dev) struct brcmf_bus *bus_if = dev_get_drvdata(dev); struct brcmf_pub *drvr = bus_if->drvr; struct brcmf_if *ifp; + struct brcmf_if *p2p_ifp; brcmf_dbg(TRACE, "\n"); @@ -791,6 +851,13 @@ int brcmf_bus_start(struct device *dev) if (IS_ERR(ifp)) return PTR_ERR(ifp); + if (brcmf_p2p_enable) + p2p_ifp = brcmf_add_if(drvr, 1, 0, "p2p%d", NULL); + else + p2p_ifp = NULL; + if (IS_ERR(p2p_ifp)) + p2p_ifp = NULL; + /* signal bus ready */ bus_if->state = BRCMF_BUS_DATA; @@ -817,8 +884,14 @@ fail: brcmf_cfg80211_detach(drvr->config); free_netdev(ifp->ndev); drvr->iflist[0] = NULL; + if (p2p_ifp) { + free_netdev(p2p_ifp->ndev); + drvr->iflist[1] = NULL; + } return ret; } + if ((brcmf_p2p_enable) && (p2p_ifp)) + brcmf_net_p2p_attach(p2p_ifp); return 0; } diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c index 1c854f607d5b..c04d596be5be 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c @@ -407,22 +407,21 @@ static void brcmf_p2p_print_actframe(bool tx, void *frame, u32 frame_len) /** * brcmf_p2p_set_firmware() - prepare firmware for peer-to-peer operation. * - * @p2p: P2P specific data. + * @ifp: ifp to use for iovars (primary). + * @p2p_mac: mac address to configure for p2p_da_override */ -static int brcmf_p2p_set_firmware(struct brcmf_p2p_info *p2p) +static int brcmf_p2p_set_firmware(struct brcmf_if *ifp, u8 *p2p_mac) { - struct net_device *ndev = cfg_to_ndev(p2p->cfg); - u8 null_eth_addr[] = { 0, 0, 0, 0, 0, 0 }; s32 ret = 0; - brcmf_fil_iovar_int_set(netdev_priv(ndev), "apsta", 1); + brcmf_fil_iovar_int_set(ifp, "apsta", 1); /* In case of COB type, firmware has default mac address * After Initializing firmware, we have to set current mac address to * firmware for P2P device address */ - ret = brcmf_fil_iovar_data_set(netdev_priv(ndev), "p2p_da_override", - null_eth_addr, sizeof(null_eth_addr)); + ret = brcmf_fil_iovar_data_set(ifp, "p2p_da_override", p2p_mac, + ETH_ALEN); if (ret) brcmf_err("failed to update device address ret %d\n", ret); @@ -440,11 +439,15 @@ static int brcmf_p2p_set_firmware(struct brcmf_p2p_info *p2p) */ static void brcmf_p2p_generate_bss_mac(struct brcmf_p2p_info *p2p) { + struct brcmf_if *pri_ifp = p2p->bss_idx[P2PAPI_BSSCFG_PRIMARY].vif->ifp; + struct brcmf_if *p2p_ifp = p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif->ifp; + /* Generate the P2P Device Address. This consists of the device's * primary MAC address with the locally administered bit set. */ - memcpy(p2p->dev_addr, p2p->cfg->pub->mac, ETH_ALEN); + memcpy(p2p->dev_addr, pri_ifp->mac_addr, ETH_ALEN); p2p->dev_addr[0] |= 0x02; + memcpy(p2p_ifp->mac_addr, p2p->dev_addr, ETH_ALEN); /* Generate the P2P Interface Address. If the discovery and connection * BSSCFGs need to simultaneously co-exist, then this address must be @@ -502,112 +505,26 @@ static s32 brcmf_p2p_set_discover_state(struct brcmf_if *ifp, u8 state, return ret; } -/** - * brcmf_p2p_init_discovery() - enable discovery in the firmware. - * - * @p2p: P2P specific data. - * - * Configures the firmware to allow P2P peer discovery. Creates the - * virtual interface and consequently the P2P device for it. - */ -static s32 brcmf_p2p_init_discovery(struct brcmf_p2p_info *p2p) -{ - struct net_device *ndev = cfg_to_ndev(p2p->cfg); - struct brcmf_cfg80211_vif *vif; - struct brcmf_if *ifp; - struct p2p_bss *bss_dev; - s32 index; - s32 ret; - - brcmf_dbg(TRACE, "enter\n"); - - bss_dev = &p2p->bss_idx[P2PAPI_BSSCFG_DEVICE]; - if (bss_dev->vif != NULL) { - brcmf_dbg(INFO, "do nothing, already initialized\n"); - return 0; - } - - /* Enable P2P Discovery in the firmware */ - ret = brcmf_fil_iovar_int_set(netdev_priv(ndev), "p2p_disc", 1); - if (ret < 0) { - brcmf_err("set discover error\n"); - return ret; - } - - /* obtain bsscfg index for P2P discovery */ - ret = brcmf_fil_iovar_int_get(netdev_priv(ndev), "p2p_dev", &index); - if (ret < 0) { - brcmf_err("retrieving discover bsscfg index failed\n"); - return ret; - } - - /* - * need brcmf_if for setting the discovery state. - */ - ifp = kzalloc(sizeof(*vif->ifp), GFP_KERNEL); - if (!ifp) { - brcmf_err("could not create discovery if\n"); - return -ENOMEM; - } - - /* set required fields */ - ifp->drvr = p2p->cfg->pub; - ifp->ifidx = 0; - ifp->bssidx = index; - - /* Set the initial discovery state to SCAN */ - ret = brcmf_p2p_set_discover_state(ifp, WL_P2P_DISC_ST_SCAN, 0, 0); - - if (ret != 0) { - brcmf_err("unable to set WL_P2P_DISC_ST_SCAN\n"); - (void)brcmf_fil_iovar_int_set(netdev_priv(ndev), "p2p_disc", 0); - kfree(ifp); - return ret; - } - - /* create a vif for it */ - vif = brcmf_alloc_vif(p2p->cfg, NL80211_IFTYPE_P2P_DEVICE, false); - if (IS_ERR(vif)) { - brcmf_err("could not create discovery vif\n"); - kfree(ifp); - return PTR_ERR(vif); - } - - vif->ifp = ifp; - ifp->vif = vif; - bss_dev->vif = vif; - - return 0; -} - /** * brcmf_p2p_deinit_discovery() - disable P2P device discovery. * * @p2p: P2P specific data. * - * Resets the discovery state and disables it in firmware. The virtual - * interface and P2P device are freed. + * Resets the discovery state and disables it in firmware. */ static s32 brcmf_p2p_deinit_discovery(struct brcmf_p2p_info *p2p) { - struct net_device *ndev = cfg_to_ndev(p2p->cfg); - struct brcmf_if *ifp; - struct p2p_bss *bss_dev; + struct brcmf_cfg80211_vif *vif; + brcmf_dbg(TRACE, "enter\n"); - bss_dev = &p2p->bss_idx[P2PAPI_BSSCFG_DEVICE]; - ifp = bss_dev->vif->ifp; - /* Set the discovery state to SCAN */ - (void)brcmf_p2p_set_discover_state(ifp, WL_P2P_DISC_ST_SCAN, 0, 0); + vif = p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif; + (void)brcmf_p2p_set_discover_state(vif->ifp, WL_P2P_DISC_ST_SCAN, 0, 0); /* Disable P2P discovery in the firmware */ - (void)brcmf_fil_iovar_int_set(netdev_priv(ndev), "p2p_disc", 0); - - /* remove discovery interface */ - brcmf_free_vif(bss_dev->vif); - bss_dev->vif = NULL; - kfree(ifp); + vif = p2p->bss_idx[P2PAPI_BSSCFG_PRIMARY].vif; + (void)brcmf_fil_iovar_int_set(vif->ifp, "p2p_disc", 0); return 0; } @@ -626,18 +543,30 @@ static int brcmf_p2p_enable_discovery(struct brcmf_p2p_info *p2p) brcmf_dbg(TRACE, "enter\n"); vif = p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif; - if (vif) { - brcmf_dbg(INFO, "DISCOVERY init already done\n"); + if (!vif) { + brcmf_err("P2P config device not available\n"); + ret = -EPERM; goto exit; } - ret = brcmf_p2p_init_discovery(p2p); + if (test_bit(BRCMF_P2P_STATUS_ENABLED, &p2p->status)) { + brcmf_dbg(INFO, "P2P config device already configured\n"); + goto exit; + } + + /* Re-initialize P2P Discovery in the firmware */ + vif = p2p->bss_idx[P2PAPI_BSSCFG_PRIMARY].vif; + ret = brcmf_fil_iovar_int_set(vif->ifp, "p2p_disc", 1); if (ret < 0) { - brcmf_err("init discovery error %d\n", ret); + brcmf_err("set p2p_disc error\n"); goto exit; } - vif = p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif; + ret = brcmf_p2p_set_discover_state(vif->ifp, WL_P2P_DISC_ST_SCAN, 0, 0); + if (ret < 0) { + brcmf_err("unable to set WL_P2P_DISC_ST_SCAN\n"); + goto exit; + } /* * Set wsec to any non-zero value in the discovery bsscfg @@ -646,9 +575,12 @@ static int brcmf_p2p_enable_discovery(struct brcmf_p2p_info *p2p) * initiate WPS with us if this bit is not set. */ ret = brcmf_fil_bsscfg_int_set(vif->ifp, "wsec", AES_ENABLED); - if (ret < 0) + if (ret < 0) { brcmf_err("wsec error %d\n", ret); + goto exit; + } + set_bit(BRCMF_P2P_STATUS_ENABLED, &p2p->status); exit: return ret; } @@ -1356,20 +1288,75 @@ exit: * * @cfg: driver private data for cfg80211 interface. */ -void brcmf_p2p_attach(struct brcmf_cfg80211_info *cfg, - struct brcmf_cfg80211_vif *vif) +s32 brcmf_p2p_attach(struct brcmf_cfg80211_info *cfg) { + struct brcmf_if *pri_ifp; + struct brcmf_if *p2p_ifp; + struct brcmf_cfg80211_vif *p2p_vif; struct brcmf_p2p_info *p2p; + struct brcmf_pub *drvr; + s32 bssidx; + s32 err = 0; p2p = &cfg->p2p; - p2p->cfg = cfg; - p2p->bss_idx[P2PAPI_BSSCFG_PRIMARY].vif = vif; - brcmf_p2p_generate_bss_mac(p2p); - brcmf_p2p_set_firmware(p2p); - init_completion(&p2p->send_af_done); + + drvr = cfg->pub; + + pri_ifp = drvr->iflist[0]; + p2p_ifp = drvr->iflist[1]; + + p2p->bss_idx[P2PAPI_BSSCFG_PRIMARY].vif = pri_ifp->vif; + + if (p2p_ifp) { + p2p_vif = brcmf_alloc_vif(cfg, NL80211_IFTYPE_STATION, + false); + if (IS_ERR(p2p_vif)) { + brcmf_err("could not create discovery vif\n"); + err = -ENOMEM; + goto exit; + } + + p2p_vif->ifp = p2p_ifp; + p2p_ifp->vif = p2p_vif; + p2p_vif->wdev.netdev = p2p_ifp->ndev; + p2p_ifp->ndev->ieee80211_ptr = &p2p_vif->wdev; + SET_NETDEV_DEV(p2p_ifp->ndev, wiphy_dev(cfg->wiphy)); + + p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif = p2p_vif; + + brcmf_p2p_generate_bss_mac(p2p); + brcmf_p2p_set_firmware(pri_ifp, p2p->dev_addr); + + /* Initialize P2P Discovery in the firmware */ + err = brcmf_fil_iovar_int_set(pri_ifp, "p2p_disc", 1); + if (err < 0) { + brcmf_err("set p2p_disc error\n"); + brcmf_free_vif(p2p_vif); + goto exit; + } + /* obtain bsscfg index for P2P discovery */ + err = brcmf_fil_iovar_int_get(pri_ifp, "p2p_dev", &bssidx); + if (err < 0) { + brcmf_err("retrieving discover bsscfg index failed\n"); + brcmf_free_vif(p2p_vif); + goto exit; + } + /* Verify that firmware uses same bssidx as driver !! */ + if (p2p_ifp->bssidx != bssidx) { + brcmf_err("Incorrect bssidx=%d, compared to p2p_ifp->bssidx=%d\n", + bssidx, p2p_ifp->bssidx); + brcmf_free_vif(p2p_vif); + goto exit; + } + + init_completion(&p2p->send_af_done); + } +exit: + return err; } + /** * brcmf_p2p_detach() - detach P2P. * @@ -1377,10 +1364,15 @@ void brcmf_p2p_attach(struct brcmf_cfg80211_info *cfg, */ void brcmf_p2p_detach(struct brcmf_p2p_info *p2p) { - if (p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif != NULL) { - brcmf_p2p_cancel_remain_on_channel( - p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif->ifp); + struct brcmf_cfg80211_vif *vif; + + vif = p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif; + if (vif != NULL) { + brcmf_p2p_cancel_remain_on_channel(vif->ifp); brcmf_p2p_deinit_discovery(p2p); + /* remove discovery interface */ + brcmf_free_vif(vif); + p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif = NULL; } /* just set it all to zero */ memset(p2p, 0, sizeof(*p2p)); diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.h b/drivers/net/wireless/brcm80211/brcmfmac/p2p.h index 0594018a7f9e..8fed9a323511 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.h @@ -66,7 +66,8 @@ struct p2p_bss { * @BRCMF_P2P_STATUS_DISCOVER_LISTEN: P2P listen, remaining on channel. */ enum brcmf_p2p_status { - BRCMF_P2P_STATUS_IF_ADD = 0, + BRCMF_P2P_STATUS_ENABLED, + BRCMF_P2P_STATUS_IF_ADD, BRCMF_P2P_STATUS_IF_DEL, BRCMF_P2P_STATUS_IF_DELETING, BRCMF_P2P_STATUS_IF_CHANGING, @@ -108,8 +109,7 @@ struct brcmf_p2p_info { struct completion send_af_done; }; -void brcmf_p2p_attach(struct brcmf_cfg80211_info *cfg, - struct brcmf_cfg80211_vif *vif); +s32 brcmf_p2p_attach(struct brcmf_cfg80211_info *cfg); void brcmf_p2p_detach(struct brcmf_p2p_info *p2p); struct wireless_dev *brcmf_p2p_add_vif(struct wiphy *wiphy, const char *name, enum nl80211_iftype type, u32 *flags, diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 7ae84a0d5cf9..301157514be5 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -4857,11 +4857,19 @@ struct brcmf_cfg80211_info *brcmf_cfg80211_attach(struct brcmf_pub *drvr, brcmf_err("Failed to init iwm_priv (%d)\n", err); goto cfg80211_attach_out; } - brcmf_p2p_attach(cfg, vif); - ifp->vif = vif; + + err = brcmf_p2p_attach(cfg); + if (err) { + brcmf_err("P2P initilisation failed (%d)\n", err); + goto cfg80211_p2p_attach_out; + } + return cfg; +cfg80211_p2p_attach_out: + wl_deinit_priv(cfg); + cfg80211_attach_out: brcmf_free_vif(vif); wiphy_free(wiphy); From 426d0a562945f9e0391bf685940dfad01e1200dc Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Fri, 8 Feb 2013 15:53:53 +0100 Subject: [PATCH 100/209] brcmfmac: Use role from wdev on AP commands and fix stop_ap. Use the stored role in wdev struct to determine AP/GO role. This simplifies code. Fix stop_ap for GO role. Reviewed-by: Arend Van Spriel Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- .../wireless/brcm80211/brcmfmac/wl_cfg80211.c | 51 +++++-------------- 1 file changed, 14 insertions(+), 37 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 301157514be5..58b24373d6cf 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -3655,7 +3655,6 @@ static s32 brcmf_cfg80211_start_ap(struct wiphy *wiphy, struct net_device *ndev, struct cfg80211_ap_settings *settings) { - struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); s32 ie_offset; struct brcmf_if *ifp = netdev_priv(ndev); struct brcmf_tlv *ssid_ie; @@ -3675,22 +3674,7 @@ brcmf_cfg80211_start_ap(struct wiphy *wiphy, struct net_device *ndev, settings->ssid, settings->ssid_len, settings->auth_type, settings->inactivity_timeout); - if (ifp->vif == cfg->p2p.bss_idx[P2PAPI_BSSCFG_PRIMARY].vif) { - brcmf_dbg(TRACE, "Role = AP\n"); - dev_role = NL80211_IFTYPE_AP; - if (!test_bit(BRCMF_VIF_STATUS_AP_CREATING, - &ifp->vif->sme_state)) { - brcmf_err("Not in AP creation mode\n"); - return -EPERM; - } - } else { - brcmf_dbg(TRACE, "Role = P2P GO\n"); - dev_role = NL80211_IFTYPE_P2P_GO; - if (ifp->vif == cfg->p2p.bss_idx[P2PAPI_BSSCFG_DEVICE].vif) { - ifp = cfg->p2p.bss_idx[P2PAPI_BSSCFG_PRIMARY].vif->ifp; - ndev = ifp->ndev; - } - } + dev_role = ifp->vif->wdev.iftype; memset(&ssid_le, 0, sizeof(ssid_le)); if (settings->ssid == NULL || settings->ssid_len == 0) { @@ -3826,10 +3810,11 @@ static int brcmf_cfg80211_stop_ap(struct wiphy *wiphy, struct net_device *ndev) { struct brcmf_if *ifp = netdev_priv(ndev); s32 err = -EPERM; + struct brcmf_fil_bss_enable_le bss_enable; brcmf_dbg(TRACE, "Enter\n"); - if (ifp->vif->mode == WL_MODE_AP) { + if (ifp->vif->wdev.iftype == NL80211_IFTYPE_AP) { /* Due to most likely deauths outstanding we sleep */ /* first to make sure they get processed by fw. */ msleep(400); @@ -3843,10 +3828,18 @@ static int brcmf_cfg80211_stop_ap(struct wiphy *wiphy, struct net_device *ndev) brcmf_err("BRCMF_C_UP error %d\n", err); goto exit; } - brcmf_set_mpc(ndev, 1); - clear_bit(BRCMF_VIF_STATUS_AP_CREATING, &ifp->vif->sme_state); - clear_bit(BRCMF_VIF_STATUS_AP_CREATED, &ifp->vif->sme_state); + } else { + bss_enable.bsscfg_idx = cpu_to_le32(ifp->bssidx); + bss_enable.enable = cpu_to_le32(0); + err = brcmf_fil_iovar_data_set(ifp, "bss", &bss_enable, + sizeof(bss_enable)); + if (err < 0) + brcmf_err("bss_enable config failed %d\n", err); } + brcmf_set_mpc(ndev, 1); + set_bit(BRCMF_VIF_STATUS_AP_CREATING, &ifp->vif->sme_state); + clear_bit(BRCMF_VIF_STATUS_AP_CREATED, &ifp->vif->sme_state); + exit: return err; } @@ -3855,27 +3848,11 @@ static s32 brcmf_cfg80211_change_beacon(struct wiphy *wiphy, struct net_device *ndev, struct cfg80211_beacon_data *info) { - struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); struct brcmf_if *ifp = netdev_priv(ndev); s32 err; brcmf_dbg(TRACE, "Enter\n"); - if (ifp->vif == cfg->p2p.bss_idx[P2PAPI_BSSCFG_PRIMARY].vif) { - brcmf_dbg(TRACE, "Role = AP\n"); - if (!test_bit(BRCMF_VIF_STATUS_AP_CREATED, - &ifp->vif->sme_state)) { - brcmf_err("AP was not yet created\n"); - return -EPERM; - } - } else { - brcmf_dbg(TRACE, "Role = P2P GO\n"); - if (ifp->vif == cfg->p2p.bss_idx[P2PAPI_BSSCFG_DEVICE].vif) { - ifp = cfg->p2p.bss_idx[P2PAPI_BSSCFG_PRIMARY].vif->ifp; - ndev = ifp->ndev; - } - } - err = brcmf_config_ap_mgmt_ie(ifp->vif, info); return err; From 0a4cf487ffdc3a4e7b55e538cd05ef63539a9c20 Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Fri, 8 Feb 2013 15:53:54 +0100 Subject: [PATCH 101/209] brcmfmac: Put printing action frames code under debug flag. Reviewed-by: Arend Van Spriel Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/p2p.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c index c04d596be5be..9f87a8570770 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c @@ -300,6 +300,9 @@ static bool brcmf_p2p_is_gas_action(void *frame, u32 frame_len) * * Print information about the p2p action frame */ + +#ifdef DEBUG + static void brcmf_p2p_print_actframe(bool tx, void *frame, u32 frame_len) { struct brcmf_p2p_pub_act_frame *pact_frm; @@ -404,6 +407,14 @@ static void brcmf_p2p_print_actframe(bool tx, void *frame, u32 frame_len) } } +#else + +static void brcmf_p2p_print_actframe(bool tx, void *frame, u32 frame_len) +{ +} + +#endif + /** * brcmf_p2p_set_firmware() - prepare firmware for peer-to-peer operation. * From cdcef36b3fe27c24f8e2cc22d256bcde88018ea4 Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Fri, 8 Feb 2013 15:53:55 +0100 Subject: [PATCH 102/209] brcmfmac: Ignore E_ADD_IF for ifidx 0. All interfaces for ifidx is 0 are created ahead and therefor double registrations for not only bssidx 0, but ifidx 0 should be ignored in brcfm_add_if. Reviewed-by: Arend Van Spriel Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c index 65176c620aa6..e61be4d35741 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c @@ -716,7 +716,7 @@ struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, s32 bssidx, s32 ifidx, if (ifp) { brcmf_err("ERROR: netdev:%s already exists\n", ifp->ndev->name); - if (bssidx) { + if (ifidx) { netif_stop_queue(ifp->ndev); unregister_netdev(ifp->ndev); free_netdev(ifp->ndev); From 1bc7c654a946dca4890f6bf29d769a7ed25eb8b0 Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Fri, 8 Feb 2013 15:53:56 +0100 Subject: [PATCH 103/209] brcmfmac: Reject change vif for p2p if. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- .../net/wireless/brcm80211/brcmfmac/wl_cfg80211.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 58b24373d6cf..cba2f34d4c27 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -673,6 +673,18 @@ brcmf_cfg80211_change_iface(struct wiphy *wiphy, struct net_device *ndev, infra = 0; break; case NL80211_IFTYPE_STATION: + /* Ignore change for p2p IF. Unclear why supplicant does this */ + if ((vif->wdev.iftype == NL80211_IFTYPE_P2P_CLIENT) || + (vif->wdev.iftype == NL80211_IFTYPE_P2P_GO)) { + brcmf_dbg(TRACE, "Ignoring cmd for p2p if\n"); + /* WAR: It is unexpected to get a change of VIF for P2P + * IF, but it happens. The request can not be handled + * but returning EPERM causes a crash. Returning 0 + * without setting ieee80211_ptr->iftype causes trace + * (WARN_ON) but it works with wpa_supplicant + */ + return 0; + } vif->mode = WL_MODE_BSS; infra = 1; break; From dded3d532cbea8b96ae388b9bc173f1b2ec4d292 Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Fri, 8 Feb 2013 15:53:57 +0100 Subject: [PATCH 104/209] brcmfmac: Update netdev configuration in wiphy for p2p. Wiphy object holds information about possible netdev combinations which can be supported. This needs updating for p2p device. Also p2p device netdev has wrong 80211 iftype. Limit the change interface support to match the netdev configuration/combination possibilities. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Piotr Haber Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/p2p.c | 2 +- drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c | 11 ++++++++--- 2 files changed, 9 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c index 9f87a8570770..fd090745b82f 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c @@ -1320,7 +1320,7 @@ s32 brcmf_p2p_attach(struct brcmf_cfg80211_info *cfg) p2p->bss_idx[P2PAPI_BSSCFG_PRIMARY].vif = pri_ifp->vif; if (p2p_ifp) { - p2p_vif = brcmf_alloc_vif(cfg, NL80211_IFTYPE_STATION, + p2p_vif = brcmf_alloc_vif(cfg, NL80211_IFTYPE_P2P_DEVICE, false); if (IS_ERR(p2p_vif)) { brcmf_err("could not create discovery vif\n"); diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index cba2f34d4c27..e7ef8270726a 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -4163,11 +4163,15 @@ static void brcmf_wiphy_pno_params(struct wiphy *wiphy) static const struct ieee80211_iface_limit brcmf_iface_limits[] = { { - .max = 1, + .max = 2, .types = BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_ADHOC) | BIT(NL80211_IFTYPE_AP) }, + { + .max = 1, + .types = BIT(NL80211_IFTYPE_P2P_DEVICE) + }, { .max = 1, .types = BIT(NL80211_IFTYPE_P2P_CLIENT) | @@ -4176,7 +4180,7 @@ static const struct ieee80211_iface_limit brcmf_iface_limits[] = { }; static const struct ieee80211_iface_combination brcmf_iface_combos[] = { { - .max_interfaces = BRCMF_IFACE_MAX_CNT - 1, + .max_interfaces = BRCMF_IFACE_MAX_CNT, .num_different_channels = 1, /* no multi-channel for now */ .n_limits = ARRAY_SIZE(brcmf_iface_limits), .limits = brcmf_iface_limits @@ -4225,7 +4229,8 @@ static struct wiphy *brcmf_setup_wiphy(struct device *phydev) BIT(NL80211_IFTYPE_ADHOC) | BIT(NL80211_IFTYPE_AP) | BIT(NL80211_IFTYPE_P2P_CLIENT) | - BIT(NL80211_IFTYPE_P2P_GO); + BIT(NL80211_IFTYPE_P2P_GO) | + BIT(NL80211_IFTYPE_P2P_DEVICE); wiphy->iface_combinations = brcmf_iface_combos; wiphy->n_iface_combinations = ARRAY_SIZE(brcmf_iface_combos); wiphy->bands[IEEE80211_BAND_2GHZ] = &__wl_band_2ghz; From 7ab6acd025cdca23485227d85d80cb747a71d1fc Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Fri, 8 Feb 2013 15:53:58 +0100 Subject: [PATCH 105/209] brcmfmac: Remove sleep on del_station. Currently there is a sleep after disconnect on del_station. This timeout is not needed (anymore) and is causing problems with p2p setup, because remote side disconnects then supplicant will do del_station and while it waits the 400ms remote side will already reconnect and that is something supplicant cant handle. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Piotr Haber Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index e7ef8270726a..f283a7e969f0 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -3895,12 +3895,7 @@ brcmf_cfg80211_del_station(struct wiphy *wiphy, struct net_device *ndev, &scbval, sizeof(scbval)); if (err) brcmf_err("SCB_DEAUTHENTICATE_FOR_REASON failed %d\n", err); - /* - * Wait for the deauth event to come, supplicant will do the - * delete iface immediately and we will have problem in sending - * deauth frame if we delete the bss in firmware - */ - brcmf_delay(400); + brcmf_dbg(TRACE, "Exit\n"); return err; } From 28c14f4a3b4639032c7cd35a7d8bdd2898b5fbf2 Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Fri, 8 Feb 2013 15:53:59 +0100 Subject: [PATCH 106/209] brcmfmac: Fix rtnl_lock lockup when registering netdev. When adding a virtual interface cfg80211 already has taken the rtnl_lock. So when the netdevice is being registered the register_netdevice should be used instead of register_netdev. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Piotr Haber Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/dhd.h | 2 +- drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c | 11 ++++++++--- drivers/net/wireless/brcm80211/brcmfmac/fweh.c | 2 +- drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c | 2 +- 4 files changed, 11 insertions(+), 6 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h index c4a6083fb1a0..ef6f23be6d32 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h @@ -585,7 +585,7 @@ extern int brcmf_proto_cdc_set_dcmd(struct brcmf_pub *drvr, int ifidx, uint cmd, extern int brcmf_proto_hdrpull(struct brcmf_pub *drvr, u8 *ifidx, struct sk_buff *rxp); -extern int brcmf_net_attach(struct brcmf_if *ifp); +extern int brcmf_net_attach(struct brcmf_if *ifp, bool rtnl_locked); extern struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, s32 bssidx, s32 ifidx, char *name, u8 *mac_addr); extern void brcmf_del_if(struct brcmf_pub *drvr, s32 bssidx); diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c index e61be4d35741..6e3846ca88be 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c @@ -599,10 +599,11 @@ static const struct net_device_ops brcmf_netdev_ops_pri = { .ndo_set_rx_mode = brcmf_netdev_set_multicast_list }; -int brcmf_net_attach(struct brcmf_if *ifp) +int brcmf_net_attach(struct brcmf_if *ifp, bool rtnl_locked) { struct brcmf_pub *drvr = ifp->drvr; struct net_device *ndev; + s32 err; brcmf_dbg(TRACE, "Enter, idx=%d mac=%pM\n", ifp->bssidx, ifp->mac_addr); @@ -623,7 +624,11 @@ int brcmf_net_attach(struct brcmf_if *ifp) INIT_WORK(&ifp->setmacaddr_work, _brcmf_set_mac_address); INIT_WORK(&ifp->multicast_work, _brcmf_set_multicast_list); - if (register_netdev(ndev) != 0) { + if (rtnl_locked) + err = register_netdevice(ndev); + else + err = register_netdev(ndev); + if (err != 0) { brcmf_err("couldn't register the net device\n"); goto fail; } @@ -876,7 +881,7 @@ int brcmf_bus_start(struct device *dev) if (ret < 0) goto fail; - ret = brcmf_net_attach(ifp); + ret = brcmf_net_attach(ifp, false); fail: if (ret < 0) { brcmf_err("failed: %d\n", ret); diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fweh.c b/drivers/net/wireless/brcm80211/brcmfmac/fweh.c index 1fd29b08e632..e9d6f91a1f2b 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/fweh.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/fweh.c @@ -200,7 +200,7 @@ static void brcmf_fweh_handle_if_event(struct brcmf_pub *drvr, return; if (!drvr->fweh.evt_handler[BRCMF_E_IF]) - err = brcmf_net_attach(ifp); + err = brcmf_net_attach(ifp, false); } err = brcmf_fweh_call_event_handler(ifp, emsg->event_code, emsg, data); diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index f283a7e969f0..6cdb578fc37b 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -4668,7 +4668,7 @@ static s32 brcmf_notify_vif_event(struct brcmf_if *ifp, /* waiting process need to set the netdev name */ wait_for_completion(&event->vif_complete); - return brcmf_net_attach(ifp); + return brcmf_net_attach(ifp, true); case BRCMF_E_IF_DEL: ifp->vif = NULL; From dae3a27359adc277ea3b399b8240ce348304289e Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Fri, 8 Feb 2013 15:54:00 +0100 Subject: [PATCH 107/209] brcmfmac: Cleanup of unused defines. Remove some unused defines and comments. Also use same define for IE length. Reviewed-by: Arend Van Spriel Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/p2p.h | 6 ------ drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h | 2 +- 2 files changed, 1 insertion(+), 7 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.h b/drivers/net/wireless/brcm80211/brcmfmac/p2p.h index 8fed9a323511..9e0e962466bf 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.h @@ -20,12 +20,6 @@ struct brcmf_cfg80211_info; -/* vendor ies max buffer length for probe response or beacon */ -#define VNDR_IES_MAX_BUF_LEN 1400 -/* normal vendor ies buffer length */ -#define VNDR_IES_BUF_LEN 512 - -/* Structure to hold all saved P2P and WPS IEs for a BSSCFG */ /** * enum p2p_bss_type - different type of BSS configurations. * diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h index a020555a338b..b886f22a4acb 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h @@ -172,7 +172,7 @@ enum brcmf_vif_status { * @beacon_ie_len: IE info length for beacon frame. */ struct vif_saved_ie { - u8 probe_req_ie[VNDR_IES_BUF_LEN]; + u8 probe_req_ie[IE_MAX_LEN]; u8 probe_res_ie[IE_MAX_LEN]; u8 beacon_ie[IE_MAX_LEN]; u8 assoc_req_ie[IE_MAX_LEN]; From 4b3a89de8a2e91bf873a0044fa62b2f5afb6693a Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Fri, 8 Feb 2013 15:54:01 +0100 Subject: [PATCH 108/209] brcmfmac: Create netdev before returning from add_virtual_intf. Currently netdev gets created possibly after returning from add_virtual_intf. This is because add_if is handled asynch. This is wrong and netdev should be up before returning. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Piotr Haber Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/p2p.c | 6 +++++- drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c | 10 +--------- drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h | 2 -- 3 files changed, 6 insertions(+), 12 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c index fd090745b82f..84d6acd99353 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c @@ -1591,7 +1591,11 @@ struct wireless_dev *brcmf_p2p_add_vif(struct wiphy *wiphy, const char *name, } strncpy(ifp->ndev->name, name, sizeof(ifp->ndev->name) - 1); - brcmf_cfg80211_vif_complete(cfg); + err = brcmf_net_attach(ifp, true); + if (err) { + brcmf_err("Registering netdevice failed\n"); + goto fail; + } cfg->p2p.bss_idx[P2PAPI_BSSCFG_CONNECTION].vif = vif; /* Disable firmware roaming for P2P interface */ brcmf_fil_iovar_int_set(ifp, "roam_off", 1); diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 6cdb578fc37b..b5cc15463576 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -4665,10 +4665,7 @@ static s32 brcmf_notify_vif_event(struct brcmf_if *ifp, SET_NETDEV_DEV(ifp->ndev, wiphy_dev(cfg->wiphy)); mutex_unlock(&event->vif_event_lock); wake_up(&event->vif_wq); - - /* waiting process need to set the netdev name */ - wait_for_completion(&event->vif_complete); - return brcmf_net_attach(ifp, true); + return 0; case BRCMF_E_IF_DEL: ifp->vif = NULL; @@ -4800,7 +4797,6 @@ static void wl_deinit_priv(struct brcmf_cfg80211_info *cfg) static void init_vif_event(struct brcmf_cfg80211_vif_event *event) { init_waitqueue_head(&event->vif_wq); - init_completion(&event->vif_complete); mutex_init(&event->vif_event_lock); } @@ -5154,7 +5150,3 @@ int brcmf_cfg80211_wait_vif_event_timeout(struct brcmf_cfg80211_info *cfg, vif_event_equals(event, action), timeout); } -void brcmf_cfg80211_vif_complete(struct brcmf_cfg80211_info *cfg) -{ - complete(&cfg->vif_event.vif_complete); -} diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h index b886f22a4acb..8b5d4989906c 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h @@ -337,7 +337,6 @@ struct brcmf_pno_scanresults_le { struct brcmf_cfg80211_vif_event { wait_queue_head_t vif_wq; struct mutex vif_event_lock; - struct completion vif_complete; u8 action; struct brcmf_cfg80211_vif *vif; }; @@ -493,7 +492,6 @@ void brcmf_cfg80211_arm_vif_event(struct brcmf_cfg80211_info *cfg, bool brcmf_cfg80211_vif_event_armed(struct brcmf_cfg80211_info *cfg); int brcmf_cfg80211_wait_vif_event_timeout(struct brcmf_cfg80211_info *cfg, u8 action, ulong timeout); -void brcmf_cfg80211_vif_complete(struct brcmf_cfg80211_info *info); s32 brcmf_notify_escan_complete(struct brcmf_cfg80211_info *cfg, struct net_device *ndev, bool aborted, bool fw_abort); From 6eda4e2c54255cd26a58d2fcec73ec3bff7a515b Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Fri, 8 Feb 2013 15:54:02 +0100 Subject: [PATCH 109/209] brcmfmac: Add tx p2p off-channel support. With this patch off-channel action frames can be transmitted. This is needed for p2p when two devices need to find each other while using different social channels. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Piotr Haber Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/p2p.c | 673 +++++++++++++++++- drivers/net/wireless/brcm80211/brcmfmac/p2p.h | 51 +- .../wireless/brcm80211/brcmfmac/wl_cfg80211.c | 76 +- 3 files changed, 707 insertions(+), 93 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c index 84d6acd99353..4166e642068b 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c @@ -43,6 +43,9 @@ #define SOCIAL_CHAN_1 1 #define SOCIAL_CHAN_2 6 #define SOCIAL_CHAN_3 11 +#define IS_P2P_SOCIAL_CHANNEL(channel) ((channel == SOCIAL_CHAN_1) || \ + (channel == SOCIAL_CHAN_2) || \ + (channel == SOCIAL_CHAN_3)) #define SOCIAL_CHAN_CNT 3 #define AF_PEER_SEARCH_CNT 2 @@ -64,11 +67,12 @@ #define P2P_AF_MIN_DWELL_TIME 100 #define P2P_AF_MED_DWELL_TIME 400 #define P2P_AF_LONG_DWELL_TIME 1000 -#define P2P_AF_TX_MAX_RETRY 5 +#define P2P_AF_TX_MAX_RETRY 1 #define P2P_AF_MAX_WAIT_TIME 2000 #define P2P_INVALID_CHANNEL -1 #define P2P_CHANNEL_SYNC_RETRY 5 #define P2P_AF_FRM_SCAN_MAX_WAIT 1500 +#define P2P_DEFAULT_SLEEP_TIME_VSDB 200 /* WiFi P2P Public Action Frame OUI Subtypes */ #define P2P_PAF_GON_REQ 0 /* Group Owner Negotiation Req */ @@ -196,13 +200,15 @@ struct brcmf_p2psd_gas_pub_act_frame { /** * struct brcmf_config_af_params - Action Frame Parameters for tx. * - * @max_tx_retry: max tx retry count if tx no ack. * @mpc_onoff: To make sure to send successfully action frame, we have to * turn off mpc 0: off, 1: on, (-1): do nothing + * @search_channel: 1: search peer's channel to send af + * extra_listen: keep the dwell time to get af response frame. */ struct brcmf_config_af_params { - s32 max_tx_retry; s32 mpc_onoff; + bool search_channel; + bool extra_listen; }; /** @@ -415,6 +421,30 @@ static void brcmf_p2p_print_actframe(bool tx, void *frame, u32 frame_len) #endif + +/** + * brcmf_p2p_chnr_to_chspec() - convert channel number to chanspec. + * + * @channel: channel number + */ +static u16 brcmf_p2p_chnr_to_chspec(u16 channel) +{ + u16 chanspec; + + chanspec = channel & WL_CHANSPEC_CHAN_MASK; + + if (channel <= CH_MAX_2G_CHANNEL) + chanspec |= WL_CHANSPEC_BAND_2G; + else + chanspec |= WL_CHANSPEC_BAND_5G; + + chanspec |= WL_CHANSPEC_BW_20; + chanspec |= WL_CHANSPEC_CTL_SB_NONE; + + return chanspec; +} + + /** * brcmf_p2p_set_firmware() - prepare firmware for peer-to-peer operation. * @@ -811,6 +841,43 @@ exit: return err; } + +/** + * brcmf_p2p_find_listen_channel() - find listen channel in ie string. + * + * @ie: string of information elements. + * @ie_len: length of string. + * + * Scan ie for p2p ie and look for attribute 6 channel. If available determine + * channel and return it. + */ +static s32 brcmf_p2p_find_listen_channel(const u8 *ie, u32 ie_len) +{ + u8 channel_ie[5]; + s32 listen_channel; + s32 err; + + err = cfg80211_get_p2p_attr(ie, ie_len, + IEEE80211_P2P_ATTR_LISTEN_CHANNEL, + channel_ie, sizeof(channel_ie)); + if (err < 0) + return err; + + /* listen channel subel length format: */ + /* 3(country) + 1(op. class) + 1(chan num) */ + listen_channel = (s32)channel_ie[3 + 1]; + + if (listen_channel == SOCIAL_CHAN_1 || + listen_channel == SOCIAL_CHAN_2 || + listen_channel == SOCIAL_CHAN_3) { + brcmf_dbg(INFO, "Found my Listen Channel %d\n", listen_channel); + return listen_channel; + } + + return -EPERM; +} + + /** * brcmf_p2p_scan_prep() - prepare scan based on request. * @@ -831,12 +898,13 @@ int brcmf_p2p_scan_prep(struct wiphy *wiphy, if (brcmf_p2p_scan_is_p2p_request(request)) { /* find my listen channel */ - err = cfg80211_get_p2p_attr(request->ie, request->ie_len, - IEEE80211_P2P_ATTR_LISTEN_CHANNEL, - &p2p->listen_channel, 1); + err = brcmf_p2p_find_listen_channel(request->ie, + request->ie_len); if (err < 0) return err; + p2p->afx_hdl.my_listen_chan = err; + clear_bit(BRCMF_P2P_STATUS_GO_NEG_PHASE, &p2p->status); brcmf_dbg(INFO, "P2P: GO_NEG_PHASE status cleared\n"); @@ -859,13 +927,12 @@ int brcmf_p2p_scan_prep(struct wiphy *wiphy, * brcmf_p2p_discover_listen() - set firmware to discover listen state. * * @p2p: p2p device. - * @freq: center frequency for discover listen. - * #@duration: time in ms to stay on channel. + * @channel: channel nr for discover listen. + * @duration: time in ms to stay on channel. * */ static s32 -brcmf_p2p_discover_listen(struct brcmf_p2p_info *p2p, - struct ieee80211_channel *channel, u32 duration) +brcmf_p2p_discover_listen(struct brcmf_p2p_info *p2p, u16 channel, u32 duration) { struct brcmf_cfg80211_vif *vif; s32 err = 0; @@ -884,7 +951,7 @@ brcmf_p2p_discover_listen(struct brcmf_p2p_info *p2p, goto exit; } - chanspec = channel_to_chanspec(channel); + chanspec = brcmf_p2p_chnr_to_chspec(channel); err = brcmf_p2p_set_discover_state(vif->ifp, WL_P2P_DISC_ST_LISTEN, chanspec, (u16)duration); if (!err) { @@ -911,15 +978,16 @@ int brcmf_p2p_remain_on_channel(struct wiphy *wiphy, struct wireless_dev *wdev, struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); struct brcmf_p2p_info *p2p = &cfg->p2p; s32 err; + u16 channel_nr; - brcmf_dbg(TRACE, "Enter, channel: %d, duration ms (%d)\n", - ieee80211_frequency_to_channel(channel->center_freq), + channel_nr = ieee80211_frequency_to_channel(channel->center_freq); + brcmf_dbg(TRACE, "Enter, channel: %d, duration ms (%d)\n", channel_nr, duration); err = brcmf_p2p_enable_discovery(p2p); if (err) goto exit; - err = brcmf_p2p_discover_listen(p2p, channel, duration); + err = brcmf_p2p_discover_listen(p2p, channel_nr, duration); if (err) goto exit; @@ -949,11 +1017,20 @@ int brcmf_p2p_notify_listen_complete(struct brcmf_if *ifp, brcmf_dbg(TRACE, "Enter\n"); if (test_and_clear_bit(BRCMF_P2P_STATUS_DISCOVER_LISTEN, - &p2p->status)) + &p2p->status)) { + if (test_and_clear_bit(BRCMF_P2P_STATUS_WAITING_NEXT_AF_LISTEN, + &p2p->status)) { + clear_bit(BRCMF_P2P_STATUS_WAITING_NEXT_ACT_FRAME, + &p2p->status); + brcmf_dbg(INFO, "Listen DONE, wake up wait_next_af\n"); + complete(&p2p->wait_next_af); + } + cfg80211_remain_on_channel_expired(&ifp->vif->wdev, p2p->remain_on_channel_cookie, &p2p->remain_on_channel, GFP_KERNEL); + } return 0; } @@ -973,6 +1050,285 @@ void brcmf_p2p_cancel_remain_on_channel(struct brcmf_if *ifp) } +/** + * brcmf_p2p_act_frm_search() - search function for action frame. + * + * @p2p: p2p device. + * channel: channel on which action frame is to be trasmitted. + * + * search function to reach at common channel to send action frame. When + * channel is 0 then all social channels will be used to send af + */ +static s32 brcmf_p2p_act_frm_search(struct brcmf_p2p_info *p2p, u16 channel) +{ + s32 err; + u32 channel_cnt; + u16 *default_chan_list; + u32 i; + + brcmf_dbg(TRACE, "Enter\n"); + + if (channel) + channel_cnt = AF_PEER_SEARCH_CNT; + else + channel_cnt = SOCIAL_CHAN_CNT; + default_chan_list = kzalloc(channel_cnt * sizeof(*default_chan_list), + GFP_KERNEL); + if (default_chan_list == NULL) { + brcmf_err("channel list allocation failed\n"); + err = -ENOMEM; + goto exit; + } + if (channel) { + /* insert same channel to the chan_list */ + for (i = 0; i < channel_cnt; i++) + default_chan_list[i] = + brcmf_p2p_chnr_to_chspec(channel); + } else { + default_chan_list[0] = brcmf_p2p_chnr_to_chspec(SOCIAL_CHAN_1); + default_chan_list[1] = brcmf_p2p_chnr_to_chspec(SOCIAL_CHAN_2); + default_chan_list[2] = brcmf_p2p_chnr_to_chspec(SOCIAL_CHAN_3); + } + err = brcmf_p2p_escan(p2p, channel_cnt, default_chan_list, + WL_P2P_DISC_ST_SEARCH, WL_ESCAN_ACTION_START, + P2PAPI_BSSCFG_DEVICE); + kfree(default_chan_list); +exit: + return err; +} + + +/** + * brcmf_p2p_afx_handler() - afx worker thread. + * + * @work: + * + */ +static void brcmf_p2p_afx_handler(struct work_struct *work) +{ + struct afx_hdl *afx_hdl = container_of(work, struct afx_hdl, afx_work); + struct brcmf_p2p_info *p2p = container_of(afx_hdl, + struct brcmf_p2p_info, + afx_hdl); + s32 err; + + if (!afx_hdl->is_active) + return; + + if (afx_hdl->is_listen && afx_hdl->my_listen_chan) + /* 100ms ~ 300ms */ + err = brcmf_p2p_discover_listen(p2p, afx_hdl->my_listen_chan, + 100 * (1 + (random32() % 3))); + else + err = brcmf_p2p_act_frm_search(p2p, afx_hdl->peer_listen_chan); + + if (err) { + brcmf_err("ERROR occurred! value is (%d)\n", err); + if (test_bit(BRCMF_P2P_STATUS_FINDING_COMMON_CHANNEL, + &p2p->status)) + complete(&afx_hdl->act_frm_scan); + } +} + + +/** + * brcmf_p2p_af_searching_channel() - search channel. + * + * @p2p: p2p device info struct. + * + */ +static s32 brcmf_p2p_af_searching_channel(struct brcmf_p2p_info *p2p) +{ + struct afx_hdl *afx_hdl = &p2p->afx_hdl; + struct brcmf_cfg80211_vif *pri_vif; + unsigned long duration; + s32 retry; + + brcmf_dbg(TRACE, "Enter\n"); + + pri_vif = p2p->bss_idx[P2PAPI_BSSCFG_PRIMARY].vif; + + INIT_COMPLETION(afx_hdl->act_frm_scan); + set_bit(BRCMF_P2P_STATUS_FINDING_COMMON_CHANNEL, &p2p->status); + afx_hdl->is_active = true; + afx_hdl->peer_chan = P2P_INVALID_CHANNEL; + + /* Loop to wait until we find a peer's channel or the + * pending action frame tx is cancelled. + */ + retry = 0; + duration = msecs_to_jiffies(P2P_AF_FRM_SCAN_MAX_WAIT); + while ((retry < P2P_CHANNEL_SYNC_RETRY) && + (afx_hdl->peer_chan == P2P_INVALID_CHANNEL)) { + afx_hdl->is_listen = false; + brcmf_dbg(TRACE, "Scheduling action frame for sending.. (%d)\n", + retry); + /* search peer on peer's listen channel */ + schedule_work(&afx_hdl->afx_work); + wait_for_completion_timeout(&afx_hdl->act_frm_scan, duration); + if ((afx_hdl->peer_chan != P2P_INVALID_CHANNEL) || + (!test_bit(BRCMF_P2P_STATUS_FINDING_COMMON_CHANNEL, + &p2p->status))) + break; + + if (afx_hdl->my_listen_chan) { + brcmf_dbg(TRACE, "Scheduling listen peer, channel=%d\n", + afx_hdl->my_listen_chan); + /* listen on my listen channel */ + afx_hdl->is_listen = true; + schedule_work(&afx_hdl->afx_work); + wait_for_completion_timeout(&afx_hdl->act_frm_scan, + duration); + } + if ((afx_hdl->peer_chan != P2P_INVALID_CHANNEL) || + (!test_bit(BRCMF_P2P_STATUS_FINDING_COMMON_CHANNEL, + &p2p->status))) + break; + retry++; + + /* if sta is connected or connecting, sleep for a while before + * retry af tx or finding a peer + */ + if (test_bit(BRCMF_VIF_STATUS_CONNECTED, &pri_vif->sme_state) || + test_bit(BRCMF_VIF_STATUS_CONNECTING, &pri_vif->sme_state)) + msleep(P2P_DEFAULT_SLEEP_TIME_VSDB); + } + + brcmf_dbg(TRACE, "Completed search/listen peer_chan=%d\n", + afx_hdl->peer_chan); + afx_hdl->is_active = false; + + clear_bit(BRCMF_P2P_STATUS_FINDING_COMMON_CHANNEL, &p2p->status); + + return afx_hdl->peer_chan; +} + + +/** + * brcmf_p2p_scan_finding_common_channel() - was escan used for finding channel + * + * @cfg: common configuration struct. + * @bi: bss info struct, result from scan. + * + */ +bool brcmf_p2p_scan_finding_common_channel(struct brcmf_cfg80211_info *cfg, + struct brcmf_bss_info_le *bi) + +{ + struct brcmf_p2p_info *p2p = &cfg->p2p; + struct afx_hdl *afx_hdl = &p2p->afx_hdl; + u8 *ie; + s32 err; + u8 p2p_dev_addr[ETH_ALEN]; + + if (!test_bit(BRCMF_P2P_STATUS_FINDING_COMMON_CHANNEL, &p2p->status)) + return false; + + if (bi == NULL) { + brcmf_dbg(TRACE, "ACTION FRAME SCAN Done\n"); + if (afx_hdl->peer_chan == P2P_INVALID_CHANNEL) + complete(&afx_hdl->act_frm_scan); + return true; + } + + ie = ((u8 *)bi) + le16_to_cpu(bi->ie_offset); + memset(p2p_dev_addr, 0, sizeof(p2p_dev_addr)); + err = cfg80211_get_p2p_attr(ie, le32_to_cpu(bi->ie_length), + IEEE80211_P2P_ATTR_DEVICE_INFO, + p2p_dev_addr, sizeof(p2p_dev_addr)); + if (err < 0) + err = cfg80211_get_p2p_attr(ie, le32_to_cpu(bi->ie_length), + IEEE80211_P2P_ATTR_DEVICE_ID, + p2p_dev_addr, sizeof(p2p_dev_addr)); + if ((err >= 0) && + (!memcmp(p2p_dev_addr, afx_hdl->tx_dst_addr, ETH_ALEN))) { + afx_hdl->peer_chan = bi->ctl_ch ? bi->ctl_ch : + CHSPEC_CHANNEL(le16_to_cpu(bi->chanspec)); + brcmf_dbg(TRACE, "ACTION FRAME SCAN : Peer %pM found, channel : %d\n", + afx_hdl->tx_dst_addr, afx_hdl->peer_chan); + complete(&afx_hdl->act_frm_scan); + } + return true; +} + +/** + * brcmf_p2p_stop_wait_next_action_frame() - finish scan if af tx complete. + * + * @cfg: common configuration struct. + * + */ +static void +brcmf_p2p_stop_wait_next_action_frame(struct brcmf_cfg80211_info *cfg) +{ + struct brcmf_p2p_info *p2p = &cfg->p2p; + struct net_device *ndev = cfg->escan_info.ndev; + + if (test_bit(BRCMF_P2P_STATUS_SENDING_ACT_FRAME, &p2p->status) && + (test_bit(BRCMF_P2P_STATUS_ACTION_TX_COMPLETED, &p2p->status) || + test_bit(BRCMF_P2P_STATUS_ACTION_TX_NOACK, &p2p->status))) { + brcmf_dbg(TRACE, "*** Wake UP ** abort actframe iovar\n"); + /* if channel is not zero, "actfame" uses off channel scan. + * So abort scan for off channel completion. + */ + if (p2p->af_sent_channel) + brcmf_notify_escan_complete(cfg, ndev, true, true); + } else if (test_bit(BRCMF_P2P_STATUS_WAITING_NEXT_AF_LISTEN, + &p2p->status)) { + brcmf_dbg(TRACE, "*** Wake UP ** abort listen for next af frame\n"); + /* So abort scan to cancel listen */ + brcmf_notify_escan_complete(cfg, ndev, true, true); + } +} + + +/** + * brcmf_p2p_gon_req_collision() - Check if go negotiaton collission + * + * @p2p: p2p device info struct. + * + * return true if recevied action frame is to be dropped. + */ +static bool +brcmf_p2p_gon_req_collision(struct brcmf_p2p_info *p2p, u8 *mac) +{ + struct brcmf_cfg80211_info *cfg = p2p->cfg; + struct brcmf_if *ifp; + + brcmf_dbg(TRACE, "Enter\n"); + + if (!test_bit(BRCMF_P2P_STATUS_WAITING_NEXT_ACT_FRAME, &p2p->status) || + !p2p->gon_req_action) + return false; + + brcmf_dbg(TRACE, "GO Negotiation Request COLLISION !!!\n"); + /* if sa(peer) addr is less than da(my) addr, then this device + * process peer's gon request and block to send gon req. + * if not (sa addr > da addr), + * this device will process gon request and drop gon req of peer. + */ + ifp = p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif->ifp; + if (memcmp(mac, ifp->mac_addr, ETH_ALEN) < 0) { + brcmf_dbg(INFO, "Block transmit gon req !!!\n"); + p2p->block_gon_req_tx = true; + /* if we are finding a common channel for sending af, + * do not scan more to block to send current gon req + */ + if (test_and_clear_bit(BRCMF_P2P_STATUS_FINDING_COMMON_CHANNEL, + &p2p->status)) + complete(&p2p->afx_hdl.act_frm_scan); + if (test_and_clear_bit(BRCMF_P2P_STATUS_WAITING_NEXT_ACT_FRAME, + &p2p->status)) + brcmf_p2p_stop_wait_next_action_frame(cfg); + return false; + } + + /* drop gon request of peer to process gon request by this device. */ + brcmf_dbg(INFO, "Drop received gon req !!!\n"); + + return true; +} + + /** * brcmf_p2p_notify_action_frame_rx() - received action frame. * @@ -985,14 +1341,20 @@ int brcmf_p2p_notify_action_frame_rx(struct brcmf_if *ifp, const struct brcmf_event_msg *e, void *data) { + struct brcmf_cfg80211_info *cfg = ifp->drvr->config; + struct brcmf_p2p_info *p2p = &cfg->p2p; + struct afx_hdl *afx_hdl = &p2p->afx_hdl; struct wireless_dev *wdev; u32 mgmt_frame_len = e->datalen - sizeof(struct brcmf_rx_mgmt_data); struct brcmf_rx_mgmt_data *rxframe = (struct brcmf_rx_mgmt_data *)data; + u8 *frame = (u8 *)(rxframe + 1); + struct brcmf_p2p_pub_act_frame *act_frm; + struct brcmf_p2psd_gas_pub_act_frame *sd_act_frm; u16 chanspec = be16_to_cpu(rxframe->chanspec); struct ieee80211_mgmt *mgmt_frame; - s32 err; s32 freq; u16 mgmt_type; + u8 action; /* Check if wpa_supplicant has registered for this frame */ brcmf_dbg(INFO, "ifp->vif->mgmt_rx_reg %04x\n", ifp->vif->mgmt_rx_reg); @@ -1000,7 +1362,46 @@ int brcmf_p2p_notify_action_frame_rx(struct brcmf_if *ifp, if ((ifp->vif->mgmt_rx_reg & BIT(mgmt_type)) == 0) return 0; - brcmf_p2p_print_actframe(false, (u8 *)(rxframe + 1), mgmt_frame_len); + brcmf_p2p_print_actframe(false, frame, mgmt_frame_len); + + action = P2P_PAF_SUBTYPE_INVALID; + if (brcmf_p2p_is_pub_action(frame, mgmt_frame_len)) { + act_frm = (struct brcmf_p2p_pub_act_frame *)frame; + action = act_frm->subtype; + if ((action == P2P_PAF_GON_REQ) && + (brcmf_p2p_gon_req_collision(p2p, (u8 *)e->addr))) { + if (test_bit(BRCMF_P2P_STATUS_FINDING_COMMON_CHANNEL, + &p2p->status) && + (memcmp(afx_hdl->tx_dst_addr, e->addr, + ETH_ALEN) == 0)) { + afx_hdl->peer_chan = CHSPEC_CHANNEL(chanspec); + brcmf_dbg(INFO, "GON request: Peer found, channel=%d\n", + afx_hdl->peer_chan); + complete(&afx_hdl->act_frm_scan); + } + return 0; + } + /* After complete GO Negotiation, roll back to mpc mode */ + if ((action == P2P_PAF_GON_CONF) || + (action == P2P_PAF_PROVDIS_RSP)) + brcmf_set_mpc(ifp->ndev, 1); + if (action == P2P_PAF_GON_CONF) { + brcmf_dbg(TRACE, "P2P: GO_NEG_PHASE status cleared\n"); + clear_bit(BRCMF_P2P_STATUS_GO_NEG_PHASE, &p2p->status); + } + } else if (brcmf_p2p_is_gas_action(frame, mgmt_frame_len)) { + sd_act_frm = (struct brcmf_p2psd_gas_pub_act_frame *)frame; + action = sd_act_frm->action; + } + + if (test_bit(BRCMF_P2P_STATUS_WAITING_NEXT_ACT_FRAME, &p2p->status) && + (p2p->next_af_subtype == action)) { + brcmf_dbg(TRACE, "We got a right next frame! (%d)\n", action); + clear_bit(BRCMF_P2P_STATUS_WAITING_NEXT_ACT_FRAME, + &p2p->status); + /* Stop waiting for next AF. */ + brcmf_p2p_stop_wait_next_action_frame(cfg); + } mgmt_frame = kzalloc(offsetof(struct ieee80211_mgmt, u) + mgmt_frame_len, GFP_KERNEL); @@ -1009,13 +1410,11 @@ int brcmf_p2p_notify_action_frame_rx(struct brcmf_if *ifp, return -ENOMEM; } memcpy(mgmt_frame->da, ifp->mac_addr, ETH_ALEN); - err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_BSSID, mgmt_frame->bssid, - ETH_ALEN); - if (err < 0) - brcmf_err("BRCMF_C_GET_BSSID error %d\n", err); + brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_BSSID, mgmt_frame->bssid, + ETH_ALEN); memcpy(mgmt_frame->sa, e->addr, ETH_ALEN); mgmt_frame->frame_control = cpu_to_le16(IEEE80211_STYPE_ACTION); - memcpy(&mgmt_frame->u, (u8 *)(rxframe + 1), mgmt_frame_len); + memcpy(&mgmt_frame->u, frame, mgmt_frame_len); mgmt_frame_len += offsetof(struct ieee80211_mgmt, u); freq = ieee80211_channel_to_frequency(CHSPEC_CHANNEL(chanspec), @@ -1046,15 +1445,29 @@ int brcmf_p2p_notify_action_tx_complete(struct brcmf_if *ifp, struct brcmf_cfg80211_info *cfg = ifp->drvr->config; struct brcmf_p2p_info *p2p = &cfg->p2p; - brcmf_dbg(INFO, "Enter: status %d\n", e->status); + brcmf_dbg(INFO, "Enter: event %s, status=%d\n", + e->event_code == BRCMF_E_ACTION_FRAME_OFF_CHAN_COMPLETE ? + "ACTION_FRAME_OFF_CHAN_COMPLETE" : "ACTION_FRAME_COMPLETE", + e->status); - if (e->status == BRCMF_E_STATUS_SUCCESS) - set_bit(BRCMF_P2P_STATUS_ACTION_TX_COMPLETED, &p2p->status); - else - set_bit(BRCMF_P2P_STATUS_ACTION_TX_NOACK, &p2p->status); - /* for now complete the receiver process here !! */ - complete(&p2p->send_af_done); + if (!test_bit(BRCMF_P2P_STATUS_SENDING_ACT_FRAME, &p2p->status)) + return 0; + if (e->event_code == BRCMF_E_ACTION_FRAME_COMPLETE) { + if (e->status == BRCMF_E_STATUS_SUCCESS) + set_bit(BRCMF_P2P_STATUS_ACTION_TX_COMPLETED, + &p2p->status); + else { + set_bit(BRCMF_P2P_STATUS_ACTION_TX_NOACK, &p2p->status); + /* If there is no ack, we don't need to wait for + * WLC_E_ACTION_FRAME_OFFCHAN_COMPLETE event + */ + brcmf_p2p_stop_wait_next_action_frame(cfg); + } + + } else { + complete(&p2p->send_af_done); + } return 0; } @@ -1080,6 +1493,7 @@ static s32 brcmf_p2p_tx_action_frame(struct brcmf_p2p_info *p2p, brcmf_dbg(TRACE, "Enter\n"); + INIT_COMPLETION(p2p->send_af_done); clear_bit(BRCMF_P2P_STATUS_ACTION_TX_COMPLETED, &p2p->status); clear_bit(BRCMF_P2P_STATUS_ACTION_TX_NOACK, &p2p->status); @@ -1091,6 +1505,9 @@ static s32 brcmf_p2p_tx_action_frame(struct brcmf_p2p_info *p2p, goto exit; } + p2p->af_sent_channel = le32_to_cpu(af_params->channel); + p2p->af_tx_sent_jiffies = jiffies; + timeout = wait_for_completion_timeout(&p2p->send_af_done, msecs_to_jiffies(P2P_AF_MAX_WAIT_TIME)); @@ -1126,16 +1543,21 @@ static s32 brcmf_p2p_pub_af_tx(struct brcmf_cfg80211_info *cfg, struct brcmf_fil_action_frame_le *action_frame; struct brcmf_p2p_pub_act_frame *act_frm; s32 err = 0; + u16 ie_len; action_frame = &af_params->action_frame; act_frm = (struct brcmf_p2p_pub_act_frame *)(action_frame->data); + config_af_params->extra_listen = true; + switch (act_frm->subtype) { case P2P_PAF_GON_REQ: brcmf_dbg(TRACE, "P2P: GO_NEG_PHASE status set\n"); set_bit(BRCMF_P2P_STATUS_GO_NEG_PHASE, &p2p->status); config_af_params->mpc_onoff = 0; + config_af_params->search_channel = true; p2p->next_af_subtype = act_frm->subtype + 1; + p2p->gon_req_action = true; /* increase dwell time to wait for RESP frame */ af_params->dwell_time = cpu_to_le32(P2P_AF_MED_DWELL_TIME); break; @@ -1152,8 +1574,10 @@ static s32 brcmf_p2p_pub_af_tx(struct brcmf_cfg80211_info *cfg, config_af_params->mpc_onoff = 1; /* minimize dwell time */ af_params->dwell_time = cpu_to_le32(P2P_AF_MIN_DWELL_TIME); + config_af_params->extra_listen = false; break; case P2P_PAF_INVITE_REQ: + config_af_params->search_channel = true; p2p->next_af_subtype = act_frm->subtype + 1; /* increase dwell time */ af_params->dwell_time = cpu_to_le32(P2P_AF_MED_DWELL_TIME); @@ -1161,8 +1585,10 @@ static s32 brcmf_p2p_pub_af_tx(struct brcmf_cfg80211_info *cfg, case P2P_PAF_INVITE_RSP: /* minimize dwell time */ af_params->dwell_time = cpu_to_le32(P2P_AF_MIN_DWELL_TIME); + config_af_params->extra_listen = false; break; case P2P_PAF_DEVDIS_REQ: + config_af_params->search_channel = true; p2p->next_af_subtype = act_frm->subtype + 1; /* maximize dwell time to wait for RESP frame */ af_params->dwell_time = cpu_to_le32(P2P_AF_LONG_DWELL_TIME); @@ -1170,8 +1596,15 @@ static s32 brcmf_p2p_pub_af_tx(struct brcmf_cfg80211_info *cfg, case P2P_PAF_DEVDIS_RSP: /* minimize dwell time */ af_params->dwell_time = cpu_to_le32(P2P_AF_MIN_DWELL_TIME); + config_af_params->extra_listen = false; break; case P2P_PAF_PROVDIS_REQ: + ie_len = le16_to_cpu(action_frame->len) - + offsetof(struct brcmf_p2p_pub_act_frame, elts); + if (cfg80211_get_p2p_attr(&act_frm->elts[0], ie_len, + IEEE80211_P2P_ATTR_GROUP_ID, + NULL, 0) < 0) + config_af_params->search_channel = true; config_af_params->mpc_onoff = 0; p2p->next_af_subtype = act_frm->subtype + 1; /* increase dwell time to wait for RESP frame */ @@ -1182,6 +1615,7 @@ static s32 brcmf_p2p_pub_af_tx(struct brcmf_cfg80211_info *cfg, p2p->next_af_subtype = P2P_PAF_GON_REQ; /* increase dwell time to MED level */ af_params->dwell_time = cpu_to_le32(P2P_AF_MED_DWELL_TIME); + config_af_params->extra_listen = false; break; default: brcmf_err("Unknown p2p pub act frame subtype: %d\n", @@ -1205,11 +1639,14 @@ bool brcmf_p2p_send_action_frame(struct brcmf_cfg80211_info *cfg, struct brcmf_p2p_info *p2p = &cfg->p2p; struct brcmf_fil_action_frame_le *action_frame; struct brcmf_config_af_params config_af_params; + struct afx_hdl *afx_hdl = &p2p->afx_hdl; u16 action_frame_len; bool ack = false; u8 category; u8 action; s32 tx_retry; + s32 extra_listen_time; + uint delta_ms; action_frame = &af_params->action_frame; action_frame_len = le16_to_cpu(action_frame->len); @@ -1226,10 +1663,12 @@ bool brcmf_p2p_send_action_frame(struct brcmf_cfg80211_info *cfg, /* initialize variables */ p2p->next_af_subtype = P2P_PAF_SUBTYPE_INVALID; + p2p->gon_req_action = false; /* config parameters */ - config_af_params.max_tx_retry = P2P_AF_TX_MAX_RETRY; config_af_params.mpc_onoff = -1; + config_af_params.search_channel = false; + config_af_params.extra_listen = false; if (brcmf_p2p_is_pub_action(action_frame->data, action_frame_len)) { /* p2p public action frame process */ @@ -1243,6 +1682,9 @@ bool brcmf_p2p_send_action_frame(struct brcmf_cfg80211_info *cfg, /* service discovery process */ if (action == P2PSD_ACTION_ID_GAS_IREQ || action == P2PSD_ACTION_ID_GAS_CREQ) { + /* configure service discovery query frame */ + config_af_params.search_channel = true; + /* save next af suptype to cancel */ /* remaining dwell time */ p2p->next_af_subtype = action + 1; @@ -1268,24 +1710,114 @@ bool brcmf_p2p_send_action_frame(struct brcmf_cfg80211_info *cfg, return false; } + /* if connecting on primary iface, sleep for a while before sending + * af tx for VSDB + */ + if (test_bit(BRCMF_VIF_STATUS_CONNECTING, + &p2p->bss_idx[P2PAPI_BSSCFG_PRIMARY].vif->sme_state)) + msleep(50); + /* if scan is ongoing, abort current scan. */ if (test_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status)) brcmf_abort_scanning(cfg); + memcpy(afx_hdl->tx_dst_addr, action_frame->da, ETH_ALEN); + /* To make sure to send successfully action frame, turn off mpc */ if (config_af_params.mpc_onoff == 0) brcmf_set_mpc(ndev, 0); - /* if failed, retry it. tx_retry_max value is configure by .... */ + /* set status and destination address before sending af */ + if (p2p->next_af_subtype != P2P_PAF_SUBTYPE_INVALID) { + /* set status to cancel the remained dwell time in rx process */ + set_bit(BRCMF_P2P_STATUS_WAITING_NEXT_ACT_FRAME, &p2p->status); + } + + p2p->af_sent_channel = 0; + set_bit(BRCMF_P2P_STATUS_SENDING_ACT_FRAME, &p2p->status); + /* validate channel and p2p ies */ + if (config_af_params.search_channel && + IS_P2P_SOCIAL_CHANNEL(le32_to_cpu(af_params->channel)) && + p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif->saved_ie.probe_req_ie_len) { + afx_hdl = &p2p->afx_hdl; + afx_hdl->peer_listen_chan = le32_to_cpu(af_params->channel); + + if (brcmf_p2p_af_searching_channel(p2p) == + P2P_INVALID_CHANNEL) { + brcmf_err("Couldn't find peer's channel.\n"); + goto exit; + } + + /* Abort scan even for VSDB scenarios. Scan gets aborted in + * firmware but after the check of piggyback algorithm. To take + * care of current piggback algo, lets abort the scan here + * itself. + */ + brcmf_notify_escan_complete(cfg, ndev, true, true); + + /* update channel */ + af_params->channel = cpu_to_le32(afx_hdl->peer_chan); + } + tx_retry = 0; - while ((ack == false) && (tx_retry < config_af_params.max_tx_retry)) { + while (!p2p->block_gon_req_tx && + (ack == false) && (tx_retry < P2P_AF_TX_MAX_RETRY)) { ack = !brcmf_p2p_tx_action_frame(p2p, af_params); tx_retry++; } - if (ack == false) + if (ack == false) { brcmf_err("Failed to send Action Frame(retry %d)\n", tx_retry); + clear_bit(BRCMF_P2P_STATUS_GO_NEG_PHASE, &p2p->status); + } exit: + clear_bit(BRCMF_P2P_STATUS_SENDING_ACT_FRAME, &p2p->status); + + /* WAR: sometimes dongle does not keep the dwell time of 'actframe'. + * if we coundn't get the next action response frame and dongle does + * not keep the dwell time, go to listen state again to get next action + * response frame. + */ + if (ack && config_af_params.extra_listen && !p2p->block_gon_req_tx && + test_bit(BRCMF_P2P_STATUS_WAITING_NEXT_ACT_FRAME, &p2p->status) && + p2p->af_sent_channel == afx_hdl->my_listen_chan) { + delta_ms = jiffies_to_msecs(jiffies - p2p->af_tx_sent_jiffies); + if (le32_to_cpu(af_params->dwell_time) > delta_ms) + extra_listen_time = le32_to_cpu(af_params->dwell_time) - + delta_ms; + else + extra_listen_time = 0; + if (extra_listen_time > 50) { + set_bit(BRCMF_P2P_STATUS_WAITING_NEXT_AF_LISTEN, + &p2p->status); + brcmf_dbg(INFO, "Wait more time! actual af time:%d, calculated extra listen:%d\n", + le32_to_cpu(af_params->dwell_time), + extra_listen_time); + extra_listen_time += 100; + if (!brcmf_p2p_discover_listen(p2p, + p2p->af_sent_channel, + extra_listen_time)) { + unsigned long duration; + + extra_listen_time += 100; + duration = msecs_to_jiffies(extra_listen_time); + wait_for_completion_timeout(&p2p->wait_next_af, + duration); + } + clear_bit(BRCMF_P2P_STATUS_WAITING_NEXT_AF_LISTEN, + &p2p->status); + } + } + + if (p2p->block_gon_req_tx) { + /* if ack is true, supplicant will wait more time(100ms). + * so we will return it as a success to get more time . + */ + p2p->block_gon_req_tx = false; + ack = true; + } + + clear_bit(BRCMF_P2P_STATUS_WAITING_NEXT_ACT_FRAME, &p2p->status); /* if all done, turn mpc on again */ if (config_af_params.mpc_onoff == 1) brcmf_set_mpc(ndev, 1); @@ -1293,6 +1825,72 @@ exit: return ack; } +/** + * brcmf_p2p_notify_rx_mgmt_p2p_probereq() - Event handler for p2p probe req. + * + * @ifp: interface pointer for which event was received. + * @e: even message. + * @data: payload of event message (probe request). + */ +s32 brcmf_p2p_notify_rx_mgmt_p2p_probereq(struct brcmf_if *ifp, + const struct brcmf_event_msg *e, + void *data) +{ + struct brcmf_cfg80211_info *cfg = ifp->drvr->config; + struct brcmf_p2p_info *p2p = &cfg->p2p; + struct afx_hdl *afx_hdl = &p2p->afx_hdl; + struct wireless_dev *wdev; + struct brcmf_cfg80211_vif *vif = ifp->vif; + struct brcmf_rx_mgmt_data *rxframe = (struct brcmf_rx_mgmt_data *)data; + u16 chanspec = be16_to_cpu(rxframe->chanspec); + u8 *mgmt_frame; + u32 mgmt_frame_len; + s32 freq; + u16 mgmt_type; + + brcmf_dbg(INFO, "Enter: event %d reason %d\n", e->event_code, + e->reason); + + if (test_bit(BRCMF_P2P_STATUS_FINDING_COMMON_CHANNEL, &p2p->status) && + (memcmp(afx_hdl->tx_dst_addr, e->addr, ETH_ALEN) == 0)) { + afx_hdl->peer_chan = CHSPEC_CHANNEL(chanspec); + brcmf_dbg(INFO, "PROBE REQUEST: Peer found, channel=%d\n", + afx_hdl->peer_chan); + complete(&afx_hdl->act_frm_scan); + } + + /* Firmware sends us two proberesponses for each idx one. At the */ + /* moment anything but bsscfgidx 0 is passed up to supplicant */ + if (e->bsscfgidx == 0) + return 0; + + /* Filter any P2P probe reqs arriving during the GO-NEG Phase */ + if (test_bit(BRCMF_P2P_STATUS_GO_NEG_PHASE, &p2p->status)) { + brcmf_dbg(INFO, "Filtering P2P probe_req in GO-NEG phase\n"); + return 0; + } + + /* Check if wpa_supplicant has registered for this frame */ + brcmf_dbg(INFO, "vif->mgmt_rx_reg %04x\n", vif->mgmt_rx_reg); + mgmt_type = (IEEE80211_STYPE_PROBE_REQ & IEEE80211_FCTL_STYPE) >> 4; + if ((vif->mgmt_rx_reg & BIT(mgmt_type)) == 0) + return 0; + + mgmt_frame = (u8 *)(rxframe + 1); + mgmt_frame_len = e->datalen - sizeof(*rxframe); + freq = ieee80211_channel_to_frequency(CHSPEC_CHANNEL(chanspec), + CHSPEC_IS2G(chanspec) ? + IEEE80211_BAND_2GHZ : + IEEE80211_BAND_5GHZ); + wdev = ifp->ndev->ieee80211_ptr; + cfg80211_rx_mgmt(wdev, freq, 0, mgmt_frame, mgmt_frame_len, GFP_ATOMIC); + + brcmf_dbg(INFO, "mgmt_frame_len (%d) , e->datalen (%d), chanspec (%04x), freq (%d)\n", + mgmt_frame_len, e->datalen, chanspec, freq); + + return 0; +} + /** * brcmf_p2p_attach() - attach for P2P. @@ -1362,6 +1960,9 @@ s32 brcmf_p2p_attach(struct brcmf_cfg80211_info *cfg) } init_completion(&p2p->send_af_done); + INIT_WORK(&p2p->afx_hdl.afx_work, brcmf_p2p_afx_handler); + init_completion(&p2p->afx_hdl.act_frm_scan); + init_completion(&p2p->wait_next_af); } exit: return err; @@ -1622,6 +2223,7 @@ fail: int brcmf_p2p_del_vif(struct wiphy *wiphy, struct wireless_dev *wdev) { struct brcmf_cfg80211_info *cfg = wiphy_priv(wiphy); + struct brcmf_p2p_info *p2p = &cfg->p2p; struct brcmf_cfg80211_vif *vif; unsigned long jiffie_timeout = msecs_to_jiffies(1500); bool wait_for_disable = false; @@ -1647,6 +2249,9 @@ int brcmf_p2p_del_vif(struct wiphy *wiphy, struct wireless_dev *wdev) break; } + clear_bit(BRCMF_P2P_STATUS_GO_NEG_PHASE, &p2p->status); + brcmf_dbg(INFO, "P2P: GO_NEG_PHASE status cleared\n"); + if (wait_for_disable) wait_for_completion_timeout(&cfg->vif_disabled, msecs_to_jiffies(500)); @@ -1666,7 +2271,7 @@ int brcmf_p2p_del_vif(struct wiphy *wiphy, struct wireless_dev *wdev) } brcmf_cfg80211_arm_vif_event(cfg, NULL); brcmf_free_vif(vif); - cfg->p2p.bss_idx[P2PAPI_BSSCFG_CONNECTION].vif = NULL; + p2p->bss_idx[P2PAPI_BSSCFG_CONNECTION].vif = NULL; return err; } diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.h b/drivers/net/wireless/brcm80211/brcmfmac/p2p.h index 9e0e962466bf..6821b26224be 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.h @@ -58,6 +58,10 @@ struct p2p_bss { * @BRCMF_P2P_STATUS_ACTION_TX_NOACK: action frame tx not acked. * @BRCMF_P2P_STATUS_GO_NEG_PHASE: P2P GO negotiation ongoing. * @BRCMF_P2P_STATUS_DISCOVER_LISTEN: P2P listen, remaining on channel. + * @BRCMF_P2P_STATUS_SENDING_ACT_FRAME: In the process of sending action frame. + * @BRCMF_P2P_STATUS_WAITING_NEXT_AF_LISTEN: extra listen time for af tx. + * @BRCMF_P2P_STATUS_WAITING_NEXT_ACT_FRAME: waiting for action frame response. + * @BRCMF_P2P_STATUS_FINDING_COMMON_CHANNEL: search channel for AF active. */ enum brcmf_p2p_status { BRCMF_P2P_STATUS_ENABLED, @@ -69,7 +73,34 @@ enum brcmf_p2p_status { BRCMF_P2P_STATUS_ACTION_TX_COMPLETED, BRCMF_P2P_STATUS_ACTION_TX_NOACK, BRCMF_P2P_STATUS_GO_NEG_PHASE, - BRCMF_P2P_STATUS_DISCOVER_LISTEN + BRCMF_P2P_STATUS_DISCOVER_LISTEN, + BRCMF_P2P_STATUS_SENDING_ACT_FRAME, + BRCMF_P2P_STATUS_WAITING_NEXT_AF_LISTEN, + BRCMF_P2P_STATUS_WAITING_NEXT_ACT_FRAME, + BRCMF_P2P_STATUS_FINDING_COMMON_CHANNEL +}; + +/** + * struct afx_hdl - action frame off channel storage. + * + * @afx_work: worker thread for searching channel + * @act_frm_scan: thread synchronizing struct. + * @is_active: channel searching active. + * @peer_chan: current channel. + * @is_listen: sets mode for afx worker. + * @my_listen_chan: this peers listen channel. + * @peer_listen_chan: remote peers listen channel. + * @tx_dst_addr: mac address where tx af should be sent to. + */ +struct afx_hdl { + struct work_struct afx_work; + struct completion act_frm_scan; + bool is_active; + s32 peer_chan; + bool is_listen; + u16 my_listen_chan; + u16 peer_listen_chan; + u8 tx_dst_addr[ETH_ALEN]; }; /** @@ -87,6 +118,12 @@ enum brcmf_p2p_status { * @remain_on_channel_cookie: cookie counter for remain on channel cmd * @next_af_subtype: expected action frame subtype. * @send_af_done: indication that action frame tx is complete. + * @afx_hdl: action frame search handler info. + * @af_sent_channel: channel action frame is sent. + * @af_tx_sent_jiffies: jiffies time when af tx was transmitted. + * @wait_next_af: thread synchronizing struct. + * @gon_req_action: about to send go negotiation requets frame. + * @block_gon_req_tx: drop tx go negotiation requets frame. */ struct brcmf_p2p_info { struct brcmf_cfg80211_info *cfg; @@ -101,6 +138,12 @@ struct brcmf_p2p_info { u32 remain_on_channel_cookie; u8 next_af_subtype; struct completion send_af_done; + struct afx_hdl afx_hdl; + u32 af_sent_channel; + unsigned long af_tx_sent_jiffies; + struct completion wait_next_af; + bool gon_req_action; + bool block_gon_req_tx; }; s32 brcmf_p2p_attach(struct brcmf_cfg80211_info *cfg); @@ -132,5 +175,9 @@ int brcmf_p2p_notify_action_tx_complete(struct brcmf_if *ifp, bool brcmf_p2p_send_action_frame(struct brcmf_cfg80211_info *cfg, struct net_device *ndev, struct brcmf_fil_af_params_le *af_params); - +bool brcmf_p2p_scan_finding_common_channel(struct brcmf_cfg80211_info *cfg, + struct brcmf_bss_info_le *bi); +s32 brcmf_p2p_notify_rx_mgmt_p2p_probereq(struct brcmf_if *ifp, + const struct brcmf_event_msg *e, + void *data); #endif /* WL_CFGP2P_H_ */ diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index b5cc15463576..481f41ad7989 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -601,10 +601,8 @@ brcmf_notify_escan_complete(struct brcmf_cfg80211_info *cfg, cfg80211_scan_done(scan_request, aborted); brcmf_set_mpc(ndev, 1); } - if (!test_and_clear_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status)) { - brcmf_err("Scan complete while device not scanning\n"); - return -EPERM; - } + if (!test_and_clear_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status)) + brcmf_dbg(SCAN, "Scan complete, probably P2P scan\n"); return err; } @@ -2525,8 +2523,7 @@ static void brcmf_cfg80211_escan_timeout_worker(struct work_struct *work) container_of(work, struct brcmf_cfg80211_info, escan_timeout_work); - brcmf_notify_escan_complete(cfg, - cfg->escan_info.ndev, true, true); + brcmf_notify_escan_complete(cfg, cfg->escan_info.ndev, true, true); } static void brcmf_escan_timeout(unsigned long data) @@ -2603,11 +2600,6 @@ brcmf_cfg80211_escan_handler(struct brcmf_if *ifp, brcmf_err("Invalid escan result (NULL pointer)\n"); goto exit; } - if (!cfg->scan_request) { - brcmf_dbg(SCAN, "result without cfg80211 request\n"); - goto exit; - } - if (le16_to_cpu(escan_result_le->bss_count) != 1) { brcmf_err("Invalid bss_count %d: ignoring\n", escan_result_le->bss_count); @@ -2615,6 +2607,14 @@ brcmf_cfg80211_escan_handler(struct brcmf_if *ifp, } bss_info_le = &escan_result_le->bss_info_le; + if (brcmf_p2p_scan_finding_common_channel(cfg, bss_info_le)) + goto exit; + + if (!cfg->scan_request) { + brcmf_dbg(SCAN, "result without cfg80211 request\n"); + goto exit; + } + bi_length = le32_to_cpu(bss_info_le->length); if (bi_length != (le32_to_cpu(escan_result_le->buflen) - WL_ESCAN_RESULTS_FIXED_SIZE)) { @@ -2653,6 +2653,8 @@ brcmf_cfg80211_escan_handler(struct brcmf_if *ifp, list->count++; } else { cfg->escan_info.escan_state = WL_ESCAN_STATE_IDLE; + if (brcmf_p2p_scan_finding_common_channel(cfg, NULL)) + goto exit; if (cfg->scan_request) { cfg->bss_list = (struct brcmf_scan_results *) cfg->escan_info.escan_buf; @@ -2661,7 +2663,8 @@ brcmf_cfg80211_escan_handler(struct brcmf_if *ifp, brcmf_notify_escan_complete(cfg, ndev, aborted, false); } else - brcmf_err("Unexpected scan result 0x%x\n", status); + brcmf_dbg(SCAN, "Ignored scan complete result 0x%x\n", + status); } exit: return err; @@ -4038,50 +4041,6 @@ exit: return err; } -static s32 brcmf_notify_rx_mgmt_p2p_probereq(struct brcmf_if *ifp, - const struct brcmf_event_msg *e, - void *data) -{ - struct wireless_dev *wdev; - struct brcmf_cfg80211_vif *vif = ifp->vif; - struct brcmf_rx_mgmt_data *rxframe = (struct brcmf_rx_mgmt_data *)data; - u16 chanspec = be16_to_cpu(rxframe->chanspec); - u8 *mgmt_frame; - u32 mgmt_frame_len; - s32 freq; - u16 mgmt_type; - - brcmf_dbg(INFO, - "Enter: event %d reason %d\n", e->event_code, e->reason); - - /* Firmware sends us two proberesponses for each idx one. At the */ - /* moment anything but bsscfgidx 0 is passed up to supplicant */ - if (e->bsscfgidx == 0) - return 0; - - /* Check if wpa_supplicant has registered for this frame */ - brcmf_dbg(INFO, "vif->mgmt_rx_reg %04x\n", vif->mgmt_rx_reg); - mgmt_type = (IEEE80211_STYPE_PROBE_REQ & IEEE80211_FCTL_STYPE) >> 4; - if ((vif->mgmt_rx_reg & BIT(mgmt_type)) == 0) - return 0; - - mgmt_frame = (u8 *)(rxframe + 1); - mgmt_frame_len = e->datalen - sizeof(*rxframe); - freq = ieee80211_channel_to_frequency(CHSPEC_CHANNEL(chanspec), - CHSPEC_IS2G(chanspec) ? - IEEE80211_BAND_2GHZ : - IEEE80211_BAND_5GHZ); - wdev = ifp->ndev->ieee80211_ptr; - cfg80211_rx_mgmt(wdev, freq, 0, mgmt_frame, mgmt_frame_len, GFP_ATOMIC); - - brcmf_dbg(INFO, - "mgmt_frame_len (%d) , e->datalen (%d), chanspec (%04x), freq (%d)\n", - mgmt_frame_len, e->datalen, chanspec, freq); - - return 0; -} - - static struct cfg80211_ops wl_cfg80211_ops = { .add_virtual_intf = brcmf_cfg80211_add_iface, .del_virtual_intf = brcmf_cfg80211_del_iface, @@ -4240,6 +4199,7 @@ static struct wiphy *brcmf_setup_wiphy(struct device *phydev) wiphy->cipher_suites = __wl_cipher_suites; wiphy->n_cipher_suites = ARRAY_SIZE(__wl_cipher_suites); wiphy->flags |= WIPHY_FLAG_PS_ON_BY_DEFAULT | + WIPHY_FLAG_OFFCHAN_TX | WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL; wiphy->mgmt_stypes = brcmf_txrx_stypes; wiphy->max_remain_on_channel_duration = 5000; @@ -4721,13 +4681,15 @@ static void brcmf_register_event_handlers(struct brcmf_cfg80211_info *cfg) brcmf_fweh_register(cfg->pub, BRCMF_E_IF, brcmf_notify_vif_event); brcmf_fweh_register(cfg->pub, BRCMF_E_P2P_PROBEREQ_MSG, - brcmf_notify_rx_mgmt_p2p_probereq); + brcmf_p2p_notify_rx_mgmt_p2p_probereq); brcmf_fweh_register(cfg->pub, BRCMF_E_P2P_DISC_LISTEN_COMPLETE, brcmf_p2p_notify_listen_complete); brcmf_fweh_register(cfg->pub, BRCMF_E_ACTION_FRAME_RX, brcmf_p2p_notify_action_frame_rx); brcmf_fweh_register(cfg->pub, BRCMF_E_ACTION_FRAME_COMPLETE, brcmf_p2p_notify_action_tx_complete); + brcmf_fweh_register(cfg->pub, BRCMF_E_ACTION_FRAME_OFF_CHAN_COMPLETE, + brcmf_p2p_notify_action_tx_complete); } static void brcmf_deinit_priv_mem(struct brcmf_cfg80211_info *cfg) From 8708aac79e4572ba673d7a21e94ddca9f3abb7fc Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Fri, 8 Feb 2013 12:28:18 -0600 Subject: [PATCH 110/209] rtlwifi: rtl8192cu: Add new USB ID A new model of the RTL8188CUS has appeared. Reported-and-tested-by: Thomas Rosenkrantz Signed-off-by: Larry Finger Cc: Stable Signed-off-by: John W. Linville --- drivers/net/wireless/rtlwifi/rtl8192cu/sw.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c index 577c0dca21ed..a73a17bc56dd 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c @@ -285,6 +285,7 @@ static struct usb_device_id rtl8192c_usb_ids[] = { {RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0x817f, rtl92cu_hal_cfg)}, /* RTL8188CUS-VL */ {RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0x818a, rtl92cu_hal_cfg)}, + {RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0x819a, rtl92cu_hal_cfg)}, /* 8188 Combo for BC4 */ {RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0x8754, rtl92cu_hal_cfg)}, From 35adfd6e458741d3d3fca1ce0e342919eb250c2b Mon Sep 17 00:00:00 2001 From: Ilan Peer Date: Mon, 4 Feb 2013 13:16:24 +0200 Subject: [PATCH 111/209] iwlwifi: mvm: Update quota settings for all bindings The FW scheduler, schedules the bindings over a session of 128 fragments (each is 4 TU long). The quota command should allocate all the session fragments between all the bindings that require quota allocation. Currently, use static allocation, where the fragments are equally distributed between all data bindings. Note, that not allocating all the session's fragments might cause the FW scheduler to leave the medium unused. Signed-off-by: Ilan Peer Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/mvm/fw-api.h | 3 +++ drivers/net/wireless/iwlwifi/mvm/quota.c | 29 +++++++++++++++++++---- 2 files changed, 27 insertions(+), 5 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api.h b/drivers/net/wireless/iwlwifi/mvm/fw-api.h index 9fd49db32a32..23eebda848b0 100644 --- a/drivers/net/wireless/iwlwifi/mvm/fw-api.h +++ b/drivers/net/wireless/iwlwifi/mvm/fw-api.h @@ -633,6 +633,9 @@ struct iwl_binding_cmd { __le32 phy; } __packed; /* BINDING_CMD_API_S_VER_1 */ +/* The maximal number of fragments in the FW's schedule session */ +#define IWL_MVM_MAX_QUOTA 128 + /** * struct iwl_time_quota_data - configuration of time quota per binding * @id_and_color: ID and color of the relevant Binding diff --git a/drivers/net/wireless/iwlwifi/mvm/quota.c b/drivers/net/wireless/iwlwifi/mvm/quota.c index 2d4611a563c5..925628468146 100644 --- a/drivers/net/wireless/iwlwifi/mvm/quota.c +++ b/drivers/net/wireless/iwlwifi/mvm/quota.c @@ -131,7 +131,7 @@ static void iwl_mvm_quota_iterator(void *_data, u8 *mac, int iwl_mvm_update_quotas(struct iwl_mvm *mvm, struct ieee80211_vif *newvif) { struct iwl_time_quota_cmd cmd; - int i, idx, ret; + int i, idx, ret, num_active_bindings, quota, quota_rem; struct iwl_mvm_quota_iterator_data data = { .n_interfaces = {}, .colors = { -1, -1, -1, -1 }, @@ -156,20 +156,39 @@ int iwl_mvm_update_quotas(struct iwl_mvm *mvm, struct ieee80211_vif *newvif) iwl_mvm_quota_iterator(&data, newvif->addr, newvif); } + /* + * The FW's scheduling session consists of + * IWL_MVM_MAX_QUOTA fragments. Divide these fragments + * equally between all the bindings that require quota + */ + num_active_bindings = 0; + for (i = 0; i < MAX_BINDINGS; i++) { + cmd.quotas[i].id_and_color = cpu_to_le32(FW_CTXT_INVALID); + if (data.n_interfaces[i] > 0) + num_active_bindings++; + } + + if (!num_active_bindings) + goto send_cmd; + + quota = IWL_MVM_MAX_QUOTA / num_active_bindings; + quota_rem = IWL_MVM_MAX_QUOTA % num_active_bindings; + for (idx = 0, i = 0; i < MAX_BINDINGS; i++) { if (data.n_interfaces[i] <= 0) continue; cmd.quotas[idx].id_and_color = cpu_to_le32(FW_CMD_ID_AND_COLOR(i, data.colors[i])); - cmd.quotas[idx].quota = cpu_to_le32(100); - cmd.quotas[idx].max_duration = cpu_to_le32(1000); + cmd.quotas[idx].quota = cpu_to_le32(quota); + cmd.quotas[idx].max_duration = cpu_to_le32(IWL_MVM_MAX_QUOTA); idx++; } - for (i = idx; i < MAX_BINDINGS; i++) - cmd.quotas[i].id_and_color = cpu_to_le32(FW_CTXT_INVALID); + /* Give the remainder of the session to the first binding */ + le32_add_cpu(&cmd.quotas[0].quota, quota_rem); +send_cmd: ret = iwl_mvm_send_cmd_pdu(mvm, TIME_QUOTA_CMD, CMD_SYNC, sizeof(cmd), &cmd); if (ret) From 456f6ddf9cfd876a60df259dbe4f3cb943e773b4 Mon Sep 17 00:00:00 2001 From: Ilan Peer Date: Mon, 4 Feb 2013 14:09:37 +0200 Subject: [PATCH 112/209] iwlwifi: mvm: Change the Time Event type used for ROC The TE_P2P_DEVICE_DISCOVERABLE time event type used for ROC is assigned low priority in the FW, and thus has low chance of being scheduled when there are active BSS or GO VMACs (even if fragmentation is allowed). This is mainly problematic in for cases where ROC is requested for sending action frames. To overcome this, use a time event type that has priority equal to that ot the time event type used by the FW to action scan. Signed-off-by: Ilan Peer Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/mvm/time-event.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/mvm/time-event.c b/drivers/net/wireless/iwlwifi/mvm/time-event.c index b9f076f4f17c..4d62a5d4254d 100644 --- a/drivers/net/wireless/iwlwifi/mvm/time-event.c +++ b/drivers/net/wireless/iwlwifi/mvm/time-event.c @@ -76,6 +76,15 @@ #define TU_TO_JIFFIES(_tu) (usecs_to_jiffies((_tu) * 1024)) #define MSEC_TO_TU(_msec) (_msec*1000/1024) +/* For ROC use a TE type which has priority high enough to be scheduled when + * there is a concurrent BSS or GO/AP. Currently, use a TE type that has + * priority similar to the TE priority used for action scans by the FW. + * TODO: This needs to be changed, based on the reason for the ROC, i.e., use + * TE_P2P_DEVICE_DISCOVERABLE for remain on channel without mgmt skb, and use + * TE_P2P_DEVICE_ACTION_SCAN + */ +#define IWL_MVM_ROC_TE_TYPE TE_P2P_DEVICE_ACTION_SCAN + void iwl_mvm_te_clear_data(struct iwl_mvm *mvm, struct iwl_mvm_time_event_data *te_data) { @@ -436,7 +445,7 @@ static bool iwl_mvm_roc_te_notif(struct iwl_notif_wait_data *notif_wait, u32 mac_id_n_color = FW_CMD_ID_AND_COLOR(mvmvif->id, mvmvif->color); /* until we do something else */ - WARN_ON(te_data->id != TE_P2P_DEVICE_DISCOVERABLE); + WARN_ON(te_data->id != IWL_MVM_ROC_TE_TYPE); switch (pkt->hdr.cmd) { case TIME_EVENT_CMD: @@ -483,7 +492,7 @@ int iwl_mvm_start_p2p_roc(struct iwl_mvm *mvm, struct ieee80211_vif *vif, time_cmd.action = cpu_to_le32(FW_CTXT_ACTION_ADD); time_cmd.id_and_color = cpu_to_le32(FW_CMD_ID_AND_COLOR(mvmvif->id, mvmvif->color)); - time_cmd.id = cpu_to_le32(TE_P2P_DEVICE_DISCOVERABLE); + time_cmd.id = cpu_to_le32(IWL_MVM_ROC_TE_TYPE); time_cmd.apply_time = cpu_to_le32(0); time_cmd.dep_policy = cpu_to_le32(TE_INDEPENDENT); @@ -492,7 +501,7 @@ int iwl_mvm_start_p2p_roc(struct iwl_mvm *mvm, struct ieee80211_vif *vif, time_cmd.interval = cpu_to_le32(1); /* - * TE_P2P_DEVICE_DISCOVERABLE can have lower priority than other events + * IWL_MVM_ROC_TE_TYPE can have lower priority than other events * that are being scheduled by the driver/fw, and thus it might not be * scheduled. To improve the chances of it being scheduled, allow it to * be fragmented. From 8115efbdc82acc935b54f0a849eb834129ea1fd0 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Tue, 5 Feb 2013 10:08:35 +0200 Subject: [PATCH 113/209] iwlwifi: mvm: fix the keyidx assignment Fixes an issue that smatch pointed out: 1118 1119 key_flags = cpu_to_le16(keyconf->keyidx & STA_KEY_FLG_KEYID_MSK); ^^^^^^^^^^^^^^^ This is s8. ^^^^^^^^^^^^^^^^^^^^^ STA_KEY_FLG_KEYID_MSK is 0x300. The result after the bitwise AND is always zero because 0xff & 0x300. Reported-by: Dan Carpenter Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/mvm/sta.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/iwlwifi/mvm/sta.c b/drivers/net/wireless/iwlwifi/mvm/sta.c index 69603c3b2b39..8f8b66ea07ee 100644 --- a/drivers/net/wireless/iwlwifi/mvm/sta.c +++ b/drivers/net/wireless/iwlwifi/mvm/sta.c @@ -1116,7 +1116,8 @@ int iwl_mvm_remove_sta_key(struct iwl_mvm *mvm, if (WARN_ON_ONCE(mvm_sta->vif != vif)) return -EINVAL; - key_flags = cpu_to_le16(keyconf->keyidx & STA_KEY_FLG_KEYID_MSK); + key_flags = cpu_to_le16((keyconf->keyidx << STA_KEY_FLG_KEYID_POS) & + STA_KEY_FLG_KEYID_MSK); key_flags |= cpu_to_le16(STA_KEY_FLG_NO_ENC | STA_KEY_FLG_WEP_KEY_MAP); key_flags |= cpu_to_le16(STA_KEY_NOT_VALID); From c3eb536aabb966542a0b6b09ad38cc43abe9ad1a Mon Sep 17 00:00:00 2001 From: Beni Lev Date: Wed, 6 Feb 2013 17:22:18 +0200 Subject: [PATCH 114/209] iwlwifi: mvm: fix TKIP key updating When a TKIP key is updated with a station pointer that is NULL it is a GTK, so it should use the AP's station ID. Fix the code to do that. Signed-off-by: Beni Lev Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/mvm/sta.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/mvm/sta.c b/drivers/net/wireless/iwlwifi/mvm/sta.c index 8f8b66ea07ee..6b22bacdc1df 100644 --- a/drivers/net/wireless/iwlwifi/mvm/sta.c +++ b/drivers/net/wireless/iwlwifi/mvm/sta.c @@ -1155,14 +1155,26 @@ void iwl_mvm_update_tkip_key(struct iwl_mvm *mvm, struct ieee80211_sta *sta, u32 iv32, u16 *phase1key) { - struct iwl_mvm_sta *mvm_sta = (void *)sta->drv_priv; + struct iwl_mvm_sta *mvm_sta; u8 sta_id = iwl_mvm_get_key_sta_id(vif, sta); - if (sta_id == IWL_INVALID_STATION) + if (WARN_ON_ONCE(sta_id == IWL_INVALID_STATION)) return; + rcu_read_lock(); + + if (!sta) { + sta = rcu_dereference(mvm->fw_id_to_mac_id[sta_id]); + if (WARN_ON(IS_ERR_OR_NULL(sta))) { + rcu_read_unlock(); + return; + } + } + + mvm_sta = (void *)sta->drv_priv; iwl_mvm_send_sta_key(mvm, mvm_sta, keyconf, sta_id, iv32, phase1key, CMD_ASYNC); + rcu_read_unlock(); } void iwl_mvm_sta_modify_ps_wake(struct iwl_mvm *mvm, int sta_id) From a3777e0fdd4abb2f04202580c236d64ecdaac6f2 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Sun, 10 Feb 2013 13:07:08 +0200 Subject: [PATCH 115/209] iwlwifi: mvm: fix locking in iwl_mvm_ipv6_addr_change inet6_dev->lock can be taken from a timer. Disabled bottom halves when we take it. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/mvm/d3.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/mvm/d3.c b/drivers/net/wireless/iwlwifi/mvm/d3.c index 9a95c374990d..5b2c675a8752 100644 --- a/drivers/net/wireless/iwlwifi/mvm/d3.c +++ b/drivers/net/wireless/iwlwifi/mvm/d3.c @@ -97,14 +97,14 @@ void iwl_mvm_ipv6_addr_change(struct ieee80211_hw *hw, struct inet6_ifaddr *ifa; int idx = 0; - read_lock(&idev->lock); + read_lock_bh(&idev->lock); list_for_each_entry(ifa, &idev->addr_list, if_list) { mvmvif->target_ipv6_addrs[idx] = ifa->addr; idx++; if (idx >= IWL_PROTO_OFFLOAD_NUM_IPV6_ADDRS) break; } - read_unlock(&idev->lock); + read_unlock_bh(&idev->lock); mvmvif->num_target_ipv6_addrs = idx; } From cd48d8ba149484c4723a2b75159deeb83f3d2273 Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Mon, 11 Feb 2013 10:30:04 +0100 Subject: [PATCH 116/209] NFC: microread: Fix mei physical layer The MEI bus API changed according to the latest comments from the char-misc maintainers, and this patch fixes the microread mei physical layer code according to those changes: We pass the MEI id back to the probe routine, and the mei_driver takes a table of MEI ids instead of one static id. Also, mei_bus_driver got renamed to mei_driver, mei_bus_client to mei_device, and mei_bus_set/get_clientdata to mei_set/get_clientdata. Signed-off-by: Samuel Ortiz --- drivers/nfc/microread/mei.c | 43 +++++++++++++++++++++---------------- 1 file changed, 24 insertions(+), 19 deletions(-) diff --git a/drivers/nfc/microread/mei.c b/drivers/nfc/microread/mei.c index c078e56d7d14..eef38cfd812e 100644 --- a/drivers/nfc/microread/mei.c +++ b/drivers/nfc/microread/mei.c @@ -48,7 +48,7 @@ struct mei_nfc_hdr { #define MEI_NFC_MAX_READ (MEI_NFC_HEADER_SIZE + MEI_NFC_MAX_HCI_PAYLOAD) struct microread_mei_phy { - struct mei_bus_client *client; + struct mei_device *mei_device; struct nfc_hci_dev *hdev; int powered; @@ -105,14 +105,14 @@ static int microread_mei_write(void *phy_id, struct sk_buff *skb) MEI_DUMP_SKB_OUT("mei frame sent", skb); - r = mei_bus_send(phy->client, skb->data, skb->len); + r = mei_send(phy->device, skb->data, skb->len); if (r > 0) r = 0; return r; } -static void microread_event_cb(struct mei_bus_client *client, u32 events, +static void microread_event_cb(struct mei_device *device, u32 events, void *context) { struct microread_mei_phy *phy = context; @@ -120,7 +120,7 @@ static void microread_event_cb(struct mei_bus_client *client, u32 events, if (phy->hard_fault != 0) return; - if (events & BIT(MEI_BUS_EVENT_RX)) { + if (events & BIT(MEI_EVENT_RX)) { struct sk_buff *skb; int reply_size; @@ -128,7 +128,7 @@ static void microread_event_cb(struct mei_bus_client *client, u32 events, if (!skb) return; - reply_size = mei_bus_recv(client, skb->data, MEI_NFC_MAX_READ); + reply_size = mei_recv(device, skb->data, MEI_NFC_MAX_READ); if (reply_size < MEI_NFC_HEADER_SIZE) { kfree(skb); return; @@ -149,7 +149,8 @@ static struct nfc_phy_ops mei_phy_ops = { .disable = microread_mei_disable, }; -static int microread_mei_probe(struct mei_bus_client *client) +static int microread_mei_probe(struct mei_device *device, + const struct mei_id *id) { struct microread_mei_phy *phy; int r; @@ -162,10 +163,10 @@ static int microread_mei_probe(struct mei_bus_client *client) return -ENOMEM; } - phy->client = client; - mei_bus_set_clientdata(client, phy); + phy->device = device; + mei_set_clientdata(device, phy); - r = mei_bus_register_event_cb(client, microread_event_cb, phy); + r = mei_register_event_cb(device, microread_event_cb, phy); if (r) { pr_err(MICROREAD_DRIVER_NAME ": event cb registration failed\n"); goto err_out; @@ -185,9 +186,9 @@ err_out: return r; } -static int microread_mei_remove(struct mei_bus_client *client) +static int microread_mei_remove(struct mei_device *device) { - struct microread_mei_phy *phy = mei_bus_get_clientdata(client); + struct microread_mei_phy *phy = mei_get_clientdata(device); pr_info("Removing microread\n"); @@ -201,14 +202,18 @@ static int microread_mei_remove(struct mei_bus_client *client) return 0; } -static struct mei_bus_driver microread_driver = { - .driver = { - .name = MICROREAD_DRIVER_NAME, - }, - .id = { - .name = MICROREAD_DRIVER_NAME, - .uuid = MICROREAD_UUID, - }, +static struct mei_id microread_mei_tbl[] = { + { MICROREAD_DRIVER_NAME, MICROREAD_UUID }, + + /* required last entry */ + { } +}; + +MODULE_DEVICE_TABLE(mei, microread_mei_tbl); + +static struct mei_driver microread_driver = { + .id_table = microread_mei_tbl, + .name = MICROREAD_DRIVER_NAME, .probe = microread_mei_probe, .remove = microread_mei_remove, From b7566fc363e23f0efd3fa1e1460f9421cdc0d77e Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Mon, 4 Feb 2013 15:33:44 -0600 Subject: [PATCH 117/209] cfg80211: Fix memory leak When a driver requests a specific regulatory domain after cfg80211 already has one, a struct ieee80211_regdomain is leaked. Reported-by: Larry Finger Tested-by: Larry Finger Signed-off-by: Larry Finger Signed-off-by: Johannes Berg --- net/wireless/reg.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 6ea626b30a2a..08d3da2c70ab 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -2189,10 +2189,15 @@ static int __set_regdom(const struct ieee80211_regdomain *rd) * However if a driver requested this specific regulatory * domain we keep it for its private use */ - if (lr->initiator == NL80211_REGDOM_SET_BY_DRIVER) + if (lr->initiator == NL80211_REGDOM_SET_BY_DRIVER) { + const struct ieee80211_regdomain *tmp; + + tmp = get_wiphy_regdom(request_wiphy); rcu_assign_pointer(request_wiphy->regd, rd); - else + rcu_free_regdom(tmp); + } else { kfree(rd); + } rd = NULL; From bba87ffe606b7fc5fba73d1c0c5ac1eacd2cebe8 Mon Sep 17 00:00:00 2001 From: Ilan Peer Date: Sun, 3 Feb 2013 08:28:27 +0200 Subject: [PATCH 118/209] cfg80211: fix radar check for P2P_DEVICE Radar is not required for P2P_DEVICE interfaces. Signed-off-by: Ilan Peer Signed-off-by: Johannes Berg --- net/wireless/util.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/wireless/util.c b/net/wireless/util.c index d7873c7ae0ec..37a56ee1e1ed 100644 --- a/net/wireless/util.c +++ b/net/wireless/util.c @@ -1217,10 +1217,10 @@ int cfg80211_can_use_iftype_chan(struct cfg80211_registered_device *rdev, break; case NL80211_IFTYPE_P2P_CLIENT: case NL80211_IFTYPE_STATION: + case NL80211_IFTYPE_P2P_DEVICE: case NL80211_IFTYPE_MONITOR: radar_required = false; break; - case NL80211_IFTYPE_P2P_DEVICE: case NUM_NL80211_IFTYPES: case NL80211_IFTYPE_UNSPECIFIED: default: From 5b112d3d098c97b867cc580f590395cd1e72f18c Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 1 Feb 2013 01:49:58 +0100 Subject: [PATCH 119/209] cfg80211: pass wiphy to cfg80211_ref_bss/put_bss This prepares for using the spinlock instead of krefs which is needed in the next patch to track the refs of combined BSSes correctly. Acked-by: Bing Zhao [mwifiex] Signed-off-by: Johannes Berg --- drivers/net/wireless/ath/ath6kl/cfg80211.c | 4 ++-- drivers/net/wireless/ath/ath6kl/wmi.c | 2 +- drivers/net/wireless/ath/wil6210/cfg80211.c | 2 +- drivers/net/wireless/ath/wil6210/wmi.c | 2 +- .../wireless/brcm80211/brcmfmac/wl_cfg80211.c | 4 ++-- drivers/net/wireless/libertas/cfg.c | 8 ++++---- drivers/net/wireless/mwifiex/cfg80211.c | 2 +- drivers/net/wireless/mwifiex/scan.c | 2 +- drivers/net/wireless/mwifiex/sta_ioctl.c | 4 ++-- drivers/net/wireless/orinoco/scan.c | 4 ++-- drivers/net/wireless/rndis_wlan.c | 4 ++-- drivers/staging/wlan-ng/cfg80211.c | 2 +- include/net/cfg80211.h | 6 ++++-- net/mac80211/ibss.c | 4 ++-- net/mac80211/mlme.c | 6 +++--- net/mac80211/scan.c | 3 ++- net/wireless/core.c | 2 +- net/wireless/ibss.c | 4 ++-- net/wireless/mlme.c | 14 +++++++------- net/wireless/scan.c | 4 ++-- net/wireless/sme.c | 16 ++++++++-------- 21 files changed, 51 insertions(+), 48 deletions(-) diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c index 4225cca0f198..a7fb442a99aa 100644 --- a/drivers/net/wireless/ath/ath6kl/cfg80211.c +++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c @@ -767,7 +767,7 @@ void ath6kl_cfg80211_connect_event(struct ath6kl_vif *vif, u16 channel, ath6kl_dbg(ATH6KL_DBG_WLAN_CFG, "ad-hoc %s selected\n", nw_type & ADHOC_CREATOR ? "creator" : "joiner"); cfg80211_ibss_joined(vif->ndev, bssid, GFP_KERNEL); - cfg80211_put_bss(bss); + cfg80211_put_bss(ar->wiphy, bss); return; } @@ -778,7 +778,7 @@ void ath6kl_cfg80211_connect_event(struct ath6kl_vif *vif, u16 channel, assoc_req_ie, assoc_req_len, assoc_resp_ie, assoc_resp_len, WLAN_STATUS_SUCCESS, GFP_KERNEL); - cfg80211_put_bss(bss); + cfg80211_put_bss(ar->wiphy, bss); } else if (vif->sme_state == SME_CONNECTED) { /* inform roam event to cfg80211 */ cfg80211_roamed_bss(vif->ndev, bss, assoc_req_ie, assoc_req_len, diff --git a/drivers/net/wireless/ath/ath6kl/wmi.c b/drivers/net/wireless/ath/ath6kl/wmi.c index 998f8b0f62fd..d366cf105c7c 100644 --- a/drivers/net/wireless/ath/ath6kl/wmi.c +++ b/drivers/net/wireless/ath/ath6kl/wmi.c @@ -1108,7 +1108,7 @@ static int ath6kl_wmi_bssinfo_event_rx(struct wmi *wmi, u8 *datap, int len, kfree(mgmt); if (bss == NULL) return -ENOMEM; - cfg80211_put_bss(bss); + cfg80211_put_bss(ar->wiphy, bss); /* * Firmware doesn't return any event when scheduled scan has diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c index 002851fceb2f..9ecc1968262c 100644 --- a/drivers/net/wireless/ath/wil6210/cfg80211.c +++ b/drivers/net/wireless/ath/wil6210/cfg80211.c @@ -341,7 +341,7 @@ static int wil_cfg80211_connect(struct wiphy *wiphy, } out: - cfg80211_put_bss(bss); + cfg80211_put_bss(wiphy, bss); return rc; } diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c index 0b70e17cd1fb..79d608caa903 100644 --- a/drivers/net/wireless/ath/wil6210/wmi.c +++ b/drivers/net/wireless/ath/wil6210/wmi.c @@ -338,7 +338,7 @@ static void wmi_evt_rx_mgmt(struct wil6210_priv *wil, int id, void *d, int len) if (bss) { wil_dbg_wmi(wil, "Added BSS %pM\n", rx_mgmt_frame->bssid); - cfg80211_put_bss(bss); + cfg80211_put_bss(wiphy, bss); } else { wil_err(wil, "cfg80211_inform_bss() failed\n"); } diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 481f41ad7989..cecc3eff72e9 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -2323,7 +2323,7 @@ static s32 brcmf_inform_single_bss(struct brcmf_cfg80211_info *cfg, if (!bss) return -ENOMEM; - cfg80211_put_bss(bss); + cfg80211_put_bss(wiphy, bss); return err; } @@ -2429,7 +2429,7 @@ static s32 wl_inform_ibss(struct brcmf_cfg80211_info *cfg, goto CleanUp; } - cfg80211_put_bss(bss); + cfg80211_put_bss(wiphy, bss); CleanUp: diff --git a/drivers/net/wireless/libertas/cfg.c b/drivers/net/wireless/libertas/cfg.c index 230f8ebbe289..61735db3b051 100644 --- a/drivers/net/wireless/libertas/cfg.c +++ b/drivers/net/wireless/libertas/cfg.c @@ -657,7 +657,7 @@ static int lbs_ret_scan(struct lbs_private *priv, unsigned long dummy, capa, intvl, ie, ielen, LBS_SCAN_RSSI_TO_MBM(rssi), GFP_KERNEL); - cfg80211_put_bss(bss); + cfg80211_put_bss(wiphy, bss); } } else lbs_deb_scan("scan response: missing BSS channel IE\n"); @@ -1444,7 +1444,7 @@ static int lbs_cfg_connect(struct wiphy *wiphy, struct net_device *dev, done: if (bss) - cfg80211_put_bss(bss); + cfg80211_put_bss(wiphy, bss); lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret); return ret; } @@ -1766,7 +1766,7 @@ static void lbs_join_post(struct lbs_private *priv, params->beacon_interval, fake_ie, fake - fake_ie, 0, GFP_KERNEL); - cfg80211_put_bss(bss); + cfg80211_put_bss(priv->wdev->wiphy, bss); memcpy(priv->wdev->ssid, params->ssid, params->ssid_len); priv->wdev->ssid_len = params->ssid_len; @@ -2011,7 +2011,7 @@ static int lbs_join_ibss(struct wiphy *wiphy, struct net_device *dev, if (bss) { ret = lbs_ibss_join_existing(priv, params, bss); - cfg80211_put_bss(bss); + cfg80211_put_bss(wiphy, bss); } else ret = lbs_ibss_start_new(priv, params); diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c index 3a004b85b99f..81c84a29308f 100644 --- a/drivers/net/wireless/mwifiex/cfg80211.c +++ b/drivers/net/wireless/mwifiex/cfg80211.c @@ -1430,7 +1430,7 @@ static int mwifiex_cfg80211_inform_ibss_bss(struct mwifiex_private *priv) bss = cfg80211_inform_bss(priv->wdev->wiphy, chan, bss_info.bssid, 0, WLAN_CAPABILITY_IBSS, 0, ie_buf, ie_len, 0, GFP_KERNEL); - cfg80211_put_bss(bss); + cfg80211_put_bss(priv->wdev->wiphy, bss); memcpy(priv->cfg_bssid, bss_info.bssid, ETH_ALEN); return 0; diff --git a/drivers/net/wireless/mwifiex/scan.c b/drivers/net/wireless/mwifiex/scan.c index 9189a32b7844..232492487527 100644 --- a/drivers/net/wireless/mwifiex/scan.c +++ b/drivers/net/wireless/mwifiex/scan.c @@ -1746,7 +1746,7 @@ int mwifiex_ret_802_11_scan(struct mwifiex_private *priv, .mac_address, ETH_ALEN)) mwifiex_update_curr_bss_params(priv, bss); - cfg80211_put_bss(bss); + cfg80211_put_bss(priv->wdev->wiphy, bss); } } else { dev_dbg(adapter->dev, "missing BSS channel IE\n"); diff --git a/drivers/net/wireless/mwifiex/sta_ioctl.c b/drivers/net/wireless/mwifiex/sta_ioctl.c index f542bb8ccbc8..ee85b41a4dfd 100644 --- a/drivers/net/wireless/mwifiex/sta_ioctl.c +++ b/drivers/net/wireless/mwifiex/sta_ioctl.c @@ -324,7 +324,7 @@ int mwifiex_bss_start(struct mwifiex_private *priv, struct cfg80211_bss *bss, } if (bss) - cfg80211_put_bss(bss); + cfg80211_put_bss(priv->adapter->wiphy, bss); } else { /* Adhoc mode */ /* If the requested SSID matches current SSID, return */ @@ -354,7 +354,7 @@ int mwifiex_bss_start(struct mwifiex_private *priv, struct cfg80211_bss *bss, " list. Joining...\n"); ret = mwifiex_adhoc_join(priv, bss_desc); if (bss) - cfg80211_put_bss(bss); + cfg80211_put_bss(priv->adapter->wiphy, bss); } else { dev_dbg(adapter->dev, "info: Network not found in " "the list, creating adhoc with ssid = %s\n", diff --git a/drivers/net/wireless/orinoco/scan.c b/drivers/net/wireless/orinoco/scan.c index 96e39edfec77..e8c5714bfd11 100644 --- a/drivers/net/wireless/orinoco/scan.c +++ b/drivers/net/wireless/orinoco/scan.c @@ -125,7 +125,7 @@ static void orinoco_add_hostscan_result(struct orinoco_private *priv, cbss = cfg80211_inform_bss(wiphy, channel, bss->a.bssid, timestamp, capability, beacon_interval, ie_buf, ie_len, signal, GFP_KERNEL); - cfg80211_put_bss(cbss); + cfg80211_put_bss(wiphy, cbss); } void orinoco_add_extscan_result(struct orinoco_private *priv, @@ -158,7 +158,7 @@ void orinoco_add_extscan_result(struct orinoco_private *priv, cbss = cfg80211_inform_bss(wiphy, channel, bss->bssid, timestamp, capability, beacon_interval, ie, ie_len, signal, GFP_KERNEL); - cfg80211_put_bss(cbss); + cfg80211_put_bss(wiphy, cbss); } void orinoco_add_hostscan_results(struct orinoco_private *priv, diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c index abe1d039be81..fe2f272689aa 100644 --- a/drivers/net/wireless/rndis_wlan.c +++ b/drivers/net/wireless/rndis_wlan.c @@ -2029,7 +2029,7 @@ static bool rndis_bss_info_update(struct usbnet *usbdev, bss = cfg80211_inform_bss(priv->wdev.wiphy, channel, bssid->mac, timestamp, capability, beacon_interval, ie, ie_len, signal, GFP_KERNEL); - cfg80211_put_bss(bss); + cfg80211_put_bss(priv->wdev.wiphy, bss); return (bss != NULL); } @@ -2718,7 +2718,7 @@ static void rndis_wlan_craft_connected_bss(struct usbnet *usbdev, u8 *bssid, bss = cfg80211_inform_bss(priv->wdev.wiphy, channel, bssid, timestamp, capability, beacon_period, ie_buf, ie_len, signal, GFP_KERNEL); - cfg80211_put_bss(bss); + cfg80211_put_bss(priv->wdev.wiphy, bss); } /* diff --git a/drivers/staging/wlan-ng/cfg80211.c b/drivers/staging/wlan-ng/cfg80211.c index 18c06a59c091..a233f64ca22f 100644 --- a/drivers/staging/wlan-ng/cfg80211.c +++ b/drivers/staging/wlan-ng/cfg80211.c @@ -424,7 +424,7 @@ int prism2_scan(struct wiphy *wiphy, struct cfg80211_scan_request *request) goto exit; } - cfg80211_put_bss(bss); + cfg80211_put_bss(wiphy, bss); } if (result) diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 3ec70e1681d3..691b347545cb 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -3166,19 +3166,21 @@ cfg80211_get_ibss(struct wiphy *wiphy, /** * cfg80211_ref_bss - reference BSS struct + * @wiphy: the wiphy this BSS struct belongs to * @bss: the BSS struct to reference * * Increments the refcount of the given BSS struct. */ -void cfg80211_ref_bss(struct cfg80211_bss *bss); +void cfg80211_ref_bss(struct wiphy *wiphy, struct cfg80211_bss *bss); /** * cfg80211_put_bss - unref BSS struct + * @wiphy: the wiphy this BSS struct belongs to * @bss: the BSS struct * * Decrements the refcount of the given BSS struct. */ -void cfg80211_put_bss(struct cfg80211_bss *bss); +void cfg80211_put_bss(struct wiphy *wiphy, struct cfg80211_bss *bss); /** * cfg80211_unlink_bss - unlink BSS from internal data structures diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index a54c8248e0e0..71c55cc0f7b6 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -228,7 +228,7 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata, bss = cfg80211_inform_bss_frame(local->hw.wiphy, chan, mgmt, skb->len, 0, GFP_KERNEL); - cfg80211_put_bss(bss); + cfg80211_put_bss(local->hw.wiphy, bss); netif_carrier_on(sdata->dev); cfg80211_ibss_joined(sdata->dev, ifibss->bssid, GFP_KERNEL); } @@ -1159,7 +1159,7 @@ int ieee80211_ibss_leave(struct ieee80211_sub_if_data *sdata) if (cbss) { cfg80211_unlink_bss(local->hw.wiphy, cbss); - cfg80211_put_bss(cbss); + cfg80211_put_bss(local->hw.wiphy, cbss); } } diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 353b690900e9..15f2edd08a95 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1934,7 +1934,7 @@ static void ieee80211_destroy_auth_data(struct ieee80211_sub_if_data *sdata, ieee80211_vif_release_channel(sdata); } - cfg80211_put_bss(auth_data->bss); + cfg80211_put_bss(sdata->local->hw.wiphy, auth_data->bss); kfree(auth_data); sdata->u.mgd.auth_data = NULL; } @@ -2387,7 +2387,7 @@ ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata, if (!ieee80211_assoc_success(sdata, *bss, mgmt, len)) { /* oops -- internal error -- send timeout for now */ ieee80211_destroy_assoc_data(sdata, false); - cfg80211_put_bss(*bss); + cfg80211_put_bss(sdata->local->hw.wiphy, *bss); return RX_MGMT_CFG80211_ASSOC_TIMEOUT; } sdata_info(sdata, "associated\n"); @@ -3831,7 +3831,7 @@ int ieee80211_mgd_auth(struct ieee80211_sub_if_data *sdata, } /* hold our own reference */ - cfg80211_ref_bss(auth_data->bss); + cfg80211_ref_bss(local->hw.wiphy, auth_data->bss); err = 0; goto out_unlock; diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index 7f80f0a5026e..400153f7f21f 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -34,7 +34,8 @@ void ieee80211_rx_bss_put(struct ieee80211_local *local, { if (!bss) return; - cfg80211_put_bss(container_of((void *)bss, struct cfg80211_bss, priv)); + cfg80211_put_bss(local->hw.wiphy, + container_of((void *)bss, struct cfg80211_bss, priv)); } static bool is_uapsd_supported(struct ieee802_11_elems *elems) diff --git a/net/wireless/core.c b/net/wireless/core.c index ce827242f390..f0a1bbe95cff 100644 --- a/net/wireless/core.c +++ b/net/wireless/core.c @@ -715,7 +715,7 @@ void cfg80211_dev_free(struct cfg80211_registered_device *rdev) kfree(reg); } list_for_each_entry_safe(scan, tmp, &rdev->bss_list, list) - cfg80211_put_bss(&scan->pub); + cfg80211_put_bss(&rdev->wiphy, &scan->pub); kfree(rdev); } diff --git a/net/wireless/ibss.c b/net/wireless/ibss.c index 9b9551e4a6f9..d80e47194d49 100644 --- a/net/wireless/ibss.c +++ b/net/wireless/ibss.c @@ -37,7 +37,7 @@ void __cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid) if (wdev->current_bss) { cfg80211_unhold_bss(wdev->current_bss); - cfg80211_put_bss(&wdev->current_bss->pub); + cfg80211_put_bss(wdev->wiphy, &wdev->current_bss->pub); } cfg80211_hold_bss(bss_from_pub(bss)); @@ -182,7 +182,7 @@ static void __cfg80211_clear_ibss(struct net_device *dev, bool nowext) if (wdev->current_bss) { cfg80211_unhold_bss(wdev->current_bss); - cfg80211_put_bss(&wdev->current_bss->pub); + cfg80211_put_bss(wdev->wiphy, &wdev->current_bss->pub); } wdev->current_bss = NULL; diff --git a/net/wireless/mlme.c b/net/wireless/mlme.c index fee9bf70efcf..8e6920728c43 100644 --- a/net/wireless/mlme.c +++ b/net/wireless/mlme.c @@ -58,7 +58,7 @@ void cfg80211_send_rx_assoc(struct net_device *dev, struct cfg80211_bss *bss, */ if (status_code != WLAN_STATUS_SUCCESS && wdev->conn && cfg80211_sme_failed_reassoc(wdev)) { - cfg80211_put_bss(bss); + cfg80211_put_bss(wiphy, bss); goto out; } @@ -70,7 +70,7 @@ void cfg80211_send_rx_assoc(struct net_device *dev, struct cfg80211_bss *bss, * do not call connect_result() now because the * sme will schedule work that does it later. */ - cfg80211_put_bss(bss); + cfg80211_put_bss(wiphy, bss); goto out; } @@ -108,7 +108,7 @@ void __cfg80211_send_deauth(struct net_device *dev, if (wdev->current_bss && ether_addr_equal(wdev->current_bss->pub.bssid, bssid)) { cfg80211_unhold_bss(wdev->current_bss); - cfg80211_put_bss(&wdev->current_bss->pub); + cfg80211_put_bss(wiphy, &wdev->current_bss->pub); wdev->current_bss = NULL; was_current = true; } @@ -164,7 +164,7 @@ void __cfg80211_send_disassoc(struct net_device *dev, ether_addr_equal(wdev->current_bss->pub.bssid, bssid)) { cfg80211_sme_disassoc(dev, wdev->current_bss); cfg80211_unhold_bss(wdev->current_bss); - cfg80211_put_bss(&wdev->current_bss->pub); + cfg80211_put_bss(wiphy, &wdev->current_bss->pub); wdev->current_bss = NULL; } else WARN_ON(1); @@ -324,7 +324,7 @@ int __cfg80211_mlme_auth(struct cfg80211_registered_device *rdev, err = rdev_auth(rdev, dev, &req); out: - cfg80211_put_bss(req.bss); + cfg80211_put_bss(&rdev->wiphy, req.bss); return err; } @@ -432,7 +432,7 @@ out: if (err) { if (was_connected) wdev->sme_state = CFG80211_SME_CONNECTED; - cfg80211_put_bss(req.bss); + cfg80211_put_bss(&rdev->wiphy, req.bss); } return err; @@ -572,7 +572,7 @@ void cfg80211_mlme_down(struct cfg80211_registered_device *rdev, if (wdev->current_bss) { cfg80211_unhold_bss(wdev->current_bss); - cfg80211_put_bss(&wdev->current_bss->pub); + cfg80211_put_bss(&rdev->wiphy, &wdev->current_bss->pub); wdev->current_bss = NULL; } } diff --git a/net/wireless/scan.c b/net/wireless/scan.c index 36daacb31788..dacb44ac2f74 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -818,7 +818,7 @@ cfg80211_inform_bss_frame(struct wiphy *wiphy, } EXPORT_SYMBOL(cfg80211_inform_bss_frame); -void cfg80211_ref_bss(struct cfg80211_bss *pub) +void cfg80211_ref_bss(struct wiphy *wiphy, struct cfg80211_bss *pub) { struct cfg80211_internal_bss *bss; @@ -830,7 +830,7 @@ void cfg80211_ref_bss(struct cfg80211_bss *pub) } EXPORT_SYMBOL(cfg80211_ref_bss); -void cfg80211_put_bss(struct cfg80211_bss *pub) +void cfg80211_put_bss(struct wiphy *wiphy, struct cfg80211_bss *pub) { struct cfg80211_internal_bss *bss; diff --git a/net/wireless/sme.c b/net/wireless/sme.c index a825dfe12cf7..f432bd3755b1 100644 --- a/net/wireless/sme.c +++ b/net/wireless/sme.c @@ -301,7 +301,7 @@ static void __cfg80211_sme_scan_done(struct net_device *dev) bss = cfg80211_get_conn_bss(wdev); if (bss) { - cfg80211_put_bss(bss); + cfg80211_put_bss(&rdev->wiphy, bss); } else { /* not found */ if (wdev->conn->state == CFG80211_CONN_SCAN_AGAIN) @@ -464,7 +464,7 @@ void __cfg80211_connect_result(struct net_device *dev, const u8 *bssid, if (wdev->current_bss) { cfg80211_unhold_bss(wdev->current_bss); - cfg80211_put_bss(&wdev->current_bss->pub); + cfg80211_put_bss(wdev->wiphy, &wdev->current_bss->pub); wdev->current_bss = NULL; } @@ -480,7 +480,7 @@ void __cfg80211_connect_result(struct net_device *dev, const u8 *bssid, kfree(wdev->connect_keys); wdev->connect_keys = NULL; wdev->ssid_len = 0; - cfg80211_put_bss(bss); + cfg80211_put_bss(wdev->wiphy, bss); return; } @@ -586,7 +586,7 @@ void __cfg80211_roamed(struct wireless_dev *wdev, } cfg80211_unhold_bss(wdev->current_bss); - cfg80211_put_bss(&wdev->current_bss->pub); + cfg80211_put_bss(wdev->wiphy, &wdev->current_bss->pub); wdev->current_bss = NULL; cfg80211_hold_bss(bss_from_pub(bss)); @@ -621,7 +621,7 @@ void __cfg80211_roamed(struct wireless_dev *wdev, return; out: - cfg80211_put_bss(bss); + cfg80211_put_bss(wdev->wiphy, bss); } void cfg80211_roamed(struct net_device *dev, @@ -663,7 +663,7 @@ void cfg80211_roamed_bss(struct net_device *dev, ev = kzalloc(sizeof(*ev) + req_ie_len + resp_ie_len, gfp); if (!ev) { - cfg80211_put_bss(bss); + cfg80211_put_bss(wdev->wiphy, bss); return; } @@ -704,7 +704,7 @@ void __cfg80211_disconnected(struct net_device *dev, const u8 *ie, if (wdev->current_bss) { cfg80211_unhold_bss(wdev->current_bss); - cfg80211_put_bss(&wdev->current_bss->pub); + cfg80211_put_bss(wdev->wiphy, &wdev->current_bss->pub); } wdev->current_bss = NULL; @@ -875,7 +875,7 @@ int __cfg80211_connect(struct cfg80211_registered_device *rdev, if (bss) { wdev->conn->state = CFG80211_CONN_AUTHENTICATE_NEXT; err = cfg80211_conn_do_work(wdev); - cfg80211_put_bss(bss); + cfg80211_put_bss(wdev->wiphy, bss); } else { /* otherwise we'll need to scan for the AP first */ err = cfg80211_conn_scan(wdev); From 077f897a8be9c617e69035af4d17a472d4af272b Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 8 Feb 2013 09:06:36 +0100 Subject: [PATCH 120/209] wireless: fix kernel-doc Fix most kernel-doc warnings, for some reason it seems to have issues with __aligned, don't remove the documentation entries it considers to be in excess due to that. Reported-by: Fengguang Wu Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 10 ++++++---- net/mac80211/sta_info.h | 1 + 2 files changed, 7 insertions(+), 4 deletions(-) diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 691b347545cb..5d8554bd95da 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -535,7 +535,7 @@ struct mac_address { * struct cfg80211_acl_data - Access control list data * * @acl_policy: ACL policy to be applied on the station's - entry specified by mac_addr + * entry specified by mac_addr * @n_acl_entries: Number of MAC address entries passed * @mac_addrs: List of MAC addresses of stations to be used for ACL */ @@ -666,6 +666,8 @@ struct station_parameters { * @STATION_INFO_INACTIVE_TIME: @inactive_time filled * @STATION_INFO_RX_BYTES: @rx_bytes filled * @STATION_INFO_TX_BYTES: @tx_bytes filled + * @STATION_INFO_RX_BYTES64: @rx_bytes filled with 64-bit value + * @STATION_INFO_TX_BYTES64: @tx_bytes filled with 64-bit value * @STATION_INFO_LLID: @llid filled * @STATION_INFO_PLID: @plid filled * @STATION_INFO_PLINK_STATE: @plink_state filled @@ -674,8 +676,6 @@ struct station_parameters { * (tx_bitrate, tx_bitrate_flags and tx_bitrate_mcs) * @STATION_INFO_RX_PACKETS: @rx_packets filled with 32-bit value * @STATION_INFO_TX_PACKETS: @tx_packets filled with 32-bit value - * @STATION_INFO_RX_PACKETS64: @rx_packets filled with 64-bit value - * @STATION_INFO_TX_PACKETS64: @tx_packets filled with 64-bit value * @STATION_INFO_TX_RETRIES: @tx_retries filled * @STATION_INFO_TX_FAILED: @tx_failed filled * @STATION_INFO_RX_DROP_MISC: @rx_dropped_misc filled @@ -1226,6 +1226,7 @@ struct cfg80211_match_set { * @n_match_sets: number of match sets * @wiphy: the wiphy this was for * @dev: the interface + * @scan_start: start time of the scheduled scan * @channels: channels to scan * @rssi_thold: don't report scan results below this threshold (in s32 dBm) */ @@ -1404,6 +1405,8 @@ struct cfg80211_assoc_request { * @ie: Extra IEs to add to Deauthentication frame or %NULL * @ie_len: Length of ie buffer in octets * @reason_code: The reason code for the deauthentication + * @local_state_change: if set, change local state only and + * do not set a deauth frame */ struct cfg80211_deauth_request { const u8 *bssid; @@ -2629,7 +2632,6 @@ struct cfg80211_cached_keys; * the user-set AP, monitor and WDS channel * @preset_chan: (private) Used by the internal configuration code to * track the channel to be used for AP later - * @preset_chantype: (private) the corresponding channel type * @bssid: (private) Used by the internal configuration code * @ssid: (private) Used by the internal configuration code * @ssid_len: (private) Used by the internal configuration code diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h index 5a1deba2c645..350578c396c0 100644 --- a/net/mac80211/sta_info.h +++ b/net/mac80211/sta_info.h @@ -298,6 +298,7 @@ struct sta_ampdu_mlme { * @beacon_loss_count: number of times beacon loss has triggered * @supports_40mhz: tracks whether the station advertised 40 MHz support * as we overwrite its HT parameters with the currently used value + * @rcu_head: RCU head used for freeing this station struct */ struct sta_info { /* General information, mostly static */ From 45b5028e86292284f4d5794047d5dfd742c22421 Mon Sep 17 00:00:00 2001 From: Thomas Pedersen Date: Wed, 6 Feb 2013 10:17:21 -0800 Subject: [PATCH 121/209] mac80211: fix mesh sta teardown The patch "mac80211: clean up mesh sta allocation warning" moved some mesh initialization into a path which is only called when the kernel handles peering. This causes a hang when mac80211 tries to clean up a userspace-allocated station entry and delete a timer which has never been initialized. To avoid this, only do any mesh sta peering teardown if the kernel is actually handling it. The same is true when quiescing before suspend. Signed-off-by: Thomas Pedersen Signed-off-by: Johannes Berg --- net/mac80211/mesh.c | 25 +++++++++++++++++++++++++ net/mac80211/mesh.h | 3 ++- net/mac80211/mesh_plink.c | 8 ++++++-- net/mac80211/sta_info.c | 9 ++------- 4 files changed, 35 insertions(+), 10 deletions(-) diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index 35ac38871420..0c51b78b8fdc 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -149,6 +149,31 @@ u32 mesh_accept_plinks_update(struct ieee80211_sub_if_data *sdata) return changed; } +/* + * mesh_sta_cleanup - clean up any mesh sta state + * + * @sta: mesh sta to clean up. + */ +void mesh_sta_cleanup(struct sta_info *sta) +{ + struct ieee80211_sub_if_data *sdata = sta->sdata; + u32 changed; + + /* + * maybe userspace handles peer allocation and peering, but in either + * case the beacon is still generated by the kernel and we might need + * an update. + */ + changed = mesh_accept_plinks_update(sdata); + if (sdata->u.mesh.security == IEEE80211_MESH_SEC_NONE) { + changed |= mesh_plink_deactivate(sta); + del_timer_sync(&sta->plink_timer); + } + + if (changed) + ieee80211_bss_info_change_notify(sdata, changed); +} + int mesh_rmc_init(struct ieee80211_sub_if_data *sdata) { int i; diff --git a/net/mac80211/mesh.h b/net/mac80211/mesh.h index eb336253b6b3..3b9d862744ba 100644 --- a/net/mac80211/mesh.h +++ b/net/mac80211/mesh.h @@ -288,12 +288,13 @@ void mesh_neighbour_update(struct ieee80211_sub_if_data *sdata, bool mesh_peer_accepts_plinks(struct ieee802_11_elems *ie); u32 mesh_accept_plinks_update(struct ieee80211_sub_if_data *sdata); void mesh_plink_broken(struct sta_info *sta); -void mesh_plink_deactivate(struct sta_info *sta); +u32 mesh_plink_deactivate(struct sta_info *sta); int mesh_plink_open(struct sta_info *sta); void mesh_plink_block(struct sta_info *sta); void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_mgmt *mgmt, size_t len, struct ieee80211_rx_status *rx_status); +void mesh_sta_cleanup(struct sta_info *sta); /* Private interfaces */ /* Mesh tables */ diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c index 67524e7d2548..56c9b318a97e 100644 --- a/net/mac80211/mesh_plink.c +++ b/net/mac80211/mesh_plink.c @@ -214,7 +214,7 @@ static u32 __mesh_plink_deactivate(struct sta_info *sta) * * All mesh paths with this peer as next hop will be flushed */ -void mesh_plink_deactivate(struct sta_info *sta) +u32 mesh_plink_deactivate(struct sta_info *sta) { struct ieee80211_sub_if_data *sdata = sta->sdata; u32 changed; @@ -227,7 +227,7 @@ void mesh_plink_deactivate(struct sta_info *sta) sta->reason); spin_unlock_bh(&sta->lock); - ieee80211_bss_info_change_notify(sdata, changed); + return changed; } static int mesh_plink_frame_tx(struct ieee80211_sub_if_data *sdata, @@ -595,6 +595,10 @@ void mesh_plink_quiesce(struct sta_info *sta) if (!ieee80211_vif_is_mesh(&sta->sdata->vif)) return; + /* no kernel mesh sta timers have been initialized */ + if (sta->sdata->u.mesh.security != IEEE80211_MESH_SEC_NONE) + return; + if (del_timer_sync(&sta->plink_timer)) sta->plink_timer_was_running = true; } diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c index 47a0f0601768..19db20a58e23 100644 --- a/net/mac80211/sta_info.c +++ b/net/mac80211/sta_info.c @@ -137,13 +137,8 @@ static void cleanup_single_sta(struct sta_info *sta) ieee80211_purge_tx_queue(&local->hw, &sta->tx_filtered[ac]); } -#ifdef CONFIG_MAC80211_MESH - if (ieee80211_vif_is_mesh(&sdata->vif)) { - mesh_accept_plinks_update(sdata); - mesh_plink_deactivate(sta); - del_timer_sync(&sta->plink_timer); - } -#endif + if (ieee80211_vif_is_mesh(&sdata->vif)) + mesh_sta_cleanup(sta); cancel_work_sync(&sta->drv_unblock_wk); From 601513aa208f27ea87400a410d42c978421530ec Mon Sep 17 00:00:00 2001 From: Emanuel Taube Date: Wed, 6 Feb 2013 14:17:17 +0100 Subject: [PATCH 122/209] mac80211: Add the DS Params for mesh to every band There seems to be no reason, why it has to be limited to 2.4 GHz. Signed-off-by: Emanuel Taube [remove 'local' variable] Signed-off-by: Johannes Berg --- net/mac80211/mesh.c | 13 ++++--------- 1 file changed, 4 insertions(+), 9 deletions(-) diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index 0c51b78b8fdc..2bf0158c3f82 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -393,8 +393,6 @@ mesh_add_rsn_ie(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata) int mesh_add_ds_params_ie(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata) { - struct ieee80211_local *local = sdata->local; - struct ieee80211_supported_band *sband; struct ieee80211_chanctx_conf *chanctx_conf; struct ieee80211_channel *chan; u8 *pos; @@ -411,13 +409,10 @@ int mesh_add_ds_params_ie(struct sk_buff *skb, chan = chanctx_conf->def.chan; rcu_read_unlock(); - sband = local->hw.wiphy->bands[chan->band]; - if (sband->band == IEEE80211_BAND_2GHZ) { - pos = skb_put(skb, 2 + 1); - *pos++ = WLAN_EID_DS_PARAMS; - *pos++ = 1; - *pos++ = ieee80211_frequency_to_channel(chan->center_freq); - } + pos = skb_put(skb, 2 + 1); + *pos++ = WLAN_EID_DS_PARAMS; + *pos++ = 1; + *pos++ = ieee80211_frequency_to_channel(chan->center_freq); return 0; } From f9e124fbd8cbea974b5dc7e9dafddd17d21df7e2 Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Mon, 4 Feb 2013 17:44:44 +0000 Subject: [PATCH 123/209] mac80211: protect rx-path with spinlock This patch fixes the problem which was discussed in "mac80211: Fix PN corruption in case of multiple virtual interface" [1]. Amit Shakya reported a serious issue with my patch: mac80211: serialize rx path workers" [2]: In case, ieee80211_rx_handlers processing is going on for skbs received on one vif and at the same time, rx aggregation reorder timer expires on another vif then sta_rx_agg_reorder_timer_expired is invoked and it will push skbs into the single queue (local->rx_skb_queue). ieee80211_rx_handlers in the while loop assumes that the skbs are for the same sdata and sta. This assumption doesn't hold good in this scenario and the PN gets corrupted by PN received in other vif's skb, causing traffic to stop due to PN mismatch." [1] Message-Id: http://mid.gmane.org/201302041844.44436.chunkeey@googlemail.com [2] Commit-Id: 24a8fdad35835e8d71f7 Reported-by: Amit Shakya Signed-off-by: Christian Lamparter Signed-off-by: Johannes Berg --- net/mac80211/ieee80211_i.h | 9 +---- net/mac80211/main.c | 14 +------ net/mac80211/rx.c | 81 ++++++++++++++++++++++---------------- 3 files changed, 48 insertions(+), 56 deletions(-) diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 5fe9db707880..080cf0942ce7 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -958,14 +958,7 @@ struct ieee80211_local { struct sk_buff_head skb_queue; struct sk_buff_head skb_queue_unreliable; - /* - * Internal FIFO queue which is shared between multiple rx path - * stages. Its main task is to provide a serialization mechanism, - * so all rx handlers can enjoy having exclusive access to their - * private data structures. - */ - struct sk_buff_head rx_skb_queue; - bool running_rx_handler; /* protected by rx_skb_queue.lock */ + spinlock_t rx_path_lock; /* Station data */ /* diff --git a/net/mac80211/main.c b/net/mac80211/main.c index 2bdd454e8bcf..2220331f4b7c 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -34,8 +34,6 @@ #include "cfg.h" #include "debugfs.h" -static struct lock_class_key ieee80211_rx_skb_queue_class; - void ieee80211_configure_filter(struct ieee80211_local *local) { u64 mc; @@ -613,21 +611,12 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len, mutex_init(&local->key_mtx); spin_lock_init(&local->filter_lock); + spin_lock_init(&local->rx_path_lock); spin_lock_init(&local->queue_stop_reason_lock); INIT_LIST_HEAD(&local->chanctx_list); mutex_init(&local->chanctx_mtx); - /* - * The rx_skb_queue is only accessed from tasklets, - * but other SKB queues are used from within IRQ - * context. Therefore, this one needs a different - * locking class so our direct, non-irq-safe use of - * the queue's lock doesn't throw lockdep warnings. - */ - skb_queue_head_init_class(&local->rx_skb_queue, - &ieee80211_rx_skb_queue_class); - INIT_DELAYED_WORK(&local->scan_work, ieee80211_scan_work); INIT_WORK(&local->restart_work, ieee80211_restart_work); @@ -1089,7 +1078,6 @@ void ieee80211_unregister_hw(struct ieee80211_hw *hw) wiphy_warn(local->hw.wiphy, "skb_queue not empty\n"); skb_queue_purge(&local->skb_queue); skb_queue_purge(&local->skb_queue_unreliable); - skb_queue_purge(&local->rx_skb_queue); destroy_workqueue(local->workqueue); wiphy_unregister(local->hw.wiphy); diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index c98be0593756..b5f1bba7ffe1 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -668,9 +668,9 @@ static inline u16 seq_sub(u16 sq1, u16 sq2) static void ieee80211_release_reorder_frame(struct ieee80211_sub_if_data *sdata, struct tid_ampdu_rx *tid_agg_rx, - int index) + int index, + struct sk_buff_head *frames) { - struct ieee80211_local *local = sdata->local; struct sk_buff *skb = tid_agg_rx->reorder_buf[index]; struct ieee80211_rx_status *status; @@ -684,7 +684,7 @@ static void ieee80211_release_reorder_frame(struct ieee80211_sub_if_data *sdata, tid_agg_rx->reorder_buf[index] = NULL; status = IEEE80211_SKB_RXCB(skb); status->rx_flags |= IEEE80211_RX_DEFERRED_RELEASE; - skb_queue_tail(&local->rx_skb_queue, skb); + __skb_queue_tail(frames, skb); no_frame: tid_agg_rx->head_seq_num = seq_inc(tid_agg_rx->head_seq_num); @@ -692,7 +692,8 @@ no_frame: static void ieee80211_release_reorder_frames(struct ieee80211_sub_if_data *sdata, struct tid_ampdu_rx *tid_agg_rx, - u16 head_seq_num) + u16 head_seq_num, + struct sk_buff_head *frames) { int index; @@ -701,7 +702,8 @@ static void ieee80211_release_reorder_frames(struct ieee80211_sub_if_data *sdata while (seq_less(tid_agg_rx->head_seq_num, head_seq_num)) { index = seq_sub(tid_agg_rx->head_seq_num, tid_agg_rx->ssn) % tid_agg_rx->buf_size; - ieee80211_release_reorder_frame(sdata, tid_agg_rx, index); + ieee80211_release_reorder_frame(sdata, tid_agg_rx, index, + frames); } } @@ -717,7 +719,8 @@ static void ieee80211_release_reorder_frames(struct ieee80211_sub_if_data *sdata #define HT_RX_REORDER_BUF_TIMEOUT (HZ / 10) static void ieee80211_sta_reorder_release(struct ieee80211_sub_if_data *sdata, - struct tid_ampdu_rx *tid_agg_rx) + struct tid_ampdu_rx *tid_agg_rx, + struct sk_buff_head *frames) { int index, j; @@ -746,7 +749,8 @@ static void ieee80211_sta_reorder_release(struct ieee80211_sub_if_data *sdata, ht_dbg_ratelimited(sdata, "release an RX reorder frame due to timeout on earlier frames\n"); - ieee80211_release_reorder_frame(sdata, tid_agg_rx, j); + ieee80211_release_reorder_frame(sdata, tid_agg_rx, j, + frames); /* * Increment the head seq# also for the skipped slots. @@ -756,7 +760,8 @@ static void ieee80211_sta_reorder_release(struct ieee80211_sub_if_data *sdata, skipped = 0; } } else while (tid_agg_rx->reorder_buf[index]) { - ieee80211_release_reorder_frame(sdata, tid_agg_rx, index); + ieee80211_release_reorder_frame(sdata, tid_agg_rx, index, + frames); index = seq_sub(tid_agg_rx->head_seq_num, tid_agg_rx->ssn) % tid_agg_rx->buf_size; } @@ -788,7 +793,8 @@ static void ieee80211_sta_reorder_release(struct ieee80211_sub_if_data *sdata, */ static bool ieee80211_sta_manage_reorder_buf(struct ieee80211_sub_if_data *sdata, struct tid_ampdu_rx *tid_agg_rx, - struct sk_buff *skb) + struct sk_buff *skb, + struct sk_buff_head *frames) { struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; u16 sc = le16_to_cpu(hdr->seq_ctrl); @@ -816,7 +822,7 @@ static bool ieee80211_sta_manage_reorder_buf(struct ieee80211_sub_if_data *sdata head_seq_num = seq_inc(seq_sub(mpdu_seq_num, buf_size)); /* release stored frames up to new head to stack */ ieee80211_release_reorder_frames(sdata, tid_agg_rx, - head_seq_num); + head_seq_num, frames); } /* Now the new frame is always in the range of the reordering buffer */ @@ -846,7 +852,7 @@ static bool ieee80211_sta_manage_reorder_buf(struct ieee80211_sub_if_data *sdata tid_agg_rx->reorder_buf[index] = skb; tid_agg_rx->reorder_time[index] = jiffies; tid_agg_rx->stored_mpdu_num++; - ieee80211_sta_reorder_release(sdata, tid_agg_rx); + ieee80211_sta_reorder_release(sdata, tid_agg_rx, frames); out: spin_unlock(&tid_agg_rx->reorder_lock); @@ -857,7 +863,8 @@ static bool ieee80211_sta_manage_reorder_buf(struct ieee80211_sub_if_data *sdata * Reorder MPDUs from A-MPDUs, keeping them on a buffer. Returns * true if the MPDU was buffered, false if it should be processed. */ -static void ieee80211_rx_reorder_ampdu(struct ieee80211_rx_data *rx) +static void ieee80211_rx_reorder_ampdu(struct ieee80211_rx_data *rx, + struct sk_buff_head *frames) { struct sk_buff *skb = rx->skb; struct ieee80211_local *local = rx->local; @@ -922,11 +929,12 @@ static void ieee80211_rx_reorder_ampdu(struct ieee80211_rx_data *rx) * sure that we cannot get to it any more before doing * anything with it. */ - if (ieee80211_sta_manage_reorder_buf(rx->sdata, tid_agg_rx, skb)) + if (ieee80211_sta_manage_reorder_buf(rx->sdata, tid_agg_rx, skb, + frames)) return; dont_reorder: - skb_queue_tail(&local->rx_skb_queue, skb); + __skb_queue_tail(frames, skb); } static ieee80211_rx_result debug_noinline @@ -2184,7 +2192,7 @@ ieee80211_rx_h_data(struct ieee80211_rx_data *rx) } static ieee80211_rx_result debug_noinline -ieee80211_rx_h_ctrl(struct ieee80211_rx_data *rx) +ieee80211_rx_h_ctrl(struct ieee80211_rx_data *rx, struct sk_buff_head *frames) { struct sk_buff *skb = rx->skb; struct ieee80211_bar *bar = (struct ieee80211_bar *)skb->data; @@ -2223,7 +2231,7 @@ ieee80211_rx_h_ctrl(struct ieee80211_rx_data *rx) spin_lock(&tid_agg_rx->reorder_lock); /* release stored frames up to start of BAR */ ieee80211_release_reorder_frames(rx->sdata, tid_agg_rx, - start_seq_num); + start_seq_num, frames); spin_unlock(&tid_agg_rx->reorder_lock); kfree_skb(skb); @@ -2808,7 +2816,8 @@ static void ieee80211_rx_handlers_result(struct ieee80211_rx_data *rx, } } -static void ieee80211_rx_handlers(struct ieee80211_rx_data *rx) +static void ieee80211_rx_handlers(struct ieee80211_rx_data *rx, + struct sk_buff_head *frames) { ieee80211_rx_result res = RX_DROP_MONITOR; struct sk_buff *skb; @@ -2820,15 +2829,9 @@ static void ieee80211_rx_handlers(struct ieee80211_rx_data *rx) goto rxh_next; \ } while (0); - spin_lock(&rx->local->rx_skb_queue.lock); - if (rx->local->running_rx_handler) - goto unlock; - - rx->local->running_rx_handler = true; - - while ((skb = __skb_dequeue(&rx->local->rx_skb_queue))) { - spin_unlock(&rx->local->rx_skb_queue.lock); + spin_lock_bh(&rx->local->rx_path_lock); + while ((skb = __skb_dequeue(frames))) { /* * all the other fields are valid across frames * that belong to an aMPDU since they are on the @@ -2849,7 +2852,12 @@ static void ieee80211_rx_handlers(struct ieee80211_rx_data *rx) #endif CALL_RXH(ieee80211_rx_h_amsdu) CALL_RXH(ieee80211_rx_h_data) - CALL_RXH(ieee80211_rx_h_ctrl); + + /* special treatment -- needs the queue */ + res = ieee80211_rx_h_ctrl(rx, frames); + if (res != RX_CONTINUE) + goto rxh_next; + CALL_RXH(ieee80211_rx_h_mgmt_check) CALL_RXH(ieee80211_rx_h_action) CALL_RXH(ieee80211_rx_h_userspace_mgmt) @@ -2858,20 +2866,20 @@ static void ieee80211_rx_handlers(struct ieee80211_rx_data *rx) rxh_next: ieee80211_rx_handlers_result(rx, res); - spin_lock(&rx->local->rx_skb_queue.lock); + #undef CALL_RXH } - rx->local->running_rx_handler = false; - - unlock: - spin_unlock(&rx->local->rx_skb_queue.lock); + spin_unlock_bh(&rx->local->rx_path_lock); } static void ieee80211_invoke_rx_handlers(struct ieee80211_rx_data *rx) { + struct sk_buff_head reorder_release; ieee80211_rx_result res = RX_DROP_MONITOR; + __skb_queue_head_init(&reorder_release); + #define CALL_RXH(rxh) \ do { \ res = rxh(rx); \ @@ -2881,9 +2889,9 @@ static void ieee80211_invoke_rx_handlers(struct ieee80211_rx_data *rx) CALL_RXH(ieee80211_rx_h_check) - ieee80211_rx_reorder_ampdu(rx); + ieee80211_rx_reorder_ampdu(rx, &reorder_release); - ieee80211_rx_handlers(rx); + ieee80211_rx_handlers(rx, &reorder_release); return; rxh_next: @@ -2898,6 +2906,7 @@ static void ieee80211_invoke_rx_handlers(struct ieee80211_rx_data *rx) */ void ieee80211_release_reorder_timeout(struct sta_info *sta, int tid) { + struct sk_buff_head frames; struct ieee80211_rx_data rx = { .sta = sta, .sdata = sta->sdata, @@ -2913,11 +2922,13 @@ void ieee80211_release_reorder_timeout(struct sta_info *sta, int tid) if (!tid_agg_rx) return; + __skb_queue_head_init(&frames); + spin_lock(&tid_agg_rx->reorder_lock); - ieee80211_sta_reorder_release(sta->sdata, tid_agg_rx); + ieee80211_sta_reorder_release(sta->sdata, tid_agg_rx, &frames); spin_unlock(&tid_agg_rx->reorder_lock); - ieee80211_rx_handlers(&rx); + ieee80211_rx_handlers(&rx, &frames); } /* main receive path */ From 112c31f095a7106fbb3ced0dae50aa9b36ac2662 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 8 Feb 2013 22:59:00 +0100 Subject: [PATCH 124/209] mac80211: fix AP beacon loss messages The messages currently refer to probe request probes, but on some devices null data packets will be used instead. Make the messages more generic. Signed-off-by: Johannes Berg --- net/mac80211/mlme.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 15f2edd08a95..40ce00c6d4ca 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1746,7 +1746,7 @@ static void ieee80211_mgd_probe_ap(struct ieee80211_sub_if_data *sdata, if (beacon) mlme_dbg_ratelimited(sdata, - "detected beacon loss from AP - sending probe request\n"); + "detected beacon loss from AP - probing\n"); ieee80211_cqm_rssi_notify(&sdata->vif, NL80211_CQM_RSSI_BEACON_LOSS_EVENT, GFP_KERNEL); @@ -2641,7 +2641,7 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, if (ifmgd->flags & IEEE80211_STA_BEACON_POLL) { mlme_dbg_ratelimited(sdata, - "cancelling probereq poll due to a received beacon\n"); + "cancelling AP probe due to a received beacon\n"); mutex_lock(&local->mtx); ifmgd->flags &= ~IEEE80211_STA_BEACON_POLL; ieee80211_run_deferred_scan(local); From 757af6fefd53628bcfe75f7fbd302c5d4c02eba5 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 8 Feb 2013 21:29:59 +0100 Subject: [PATCH 125/209] mac80211: fix chandef tracing bug The chandef tracing writes center_freq1 twice, so that it is always 0 (no driver supports 80+80 yet) and leaves center_freq2 unset. Fix this mistake. Signed-off-by: Johannes Berg --- net/mac80211/trace.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/mac80211/trace.h b/net/mac80211/trace.h index 6ca53d64cb28..a2ca72ce3380 100644 --- a/net/mac80211/trace.h +++ b/net/mac80211/trace.h @@ -36,7 +36,7 @@ __entry->control_freq = (c)->chan->center_freq; \ __entry->chan_width = (c)->width; \ __entry->center_freq1 = (c)->center_freq1; \ - __entry->center_freq1 = (c)->center_freq2; + __entry->center_freq2 = (c)->center_freq2; #define CHANDEF_PR_FMT " control:%d MHz width:%d center: %d/%d MHz" #define CHANDEF_PR_ARG __entry->control_freq, __entry->chan_width, \ __entry->center_freq1, __entry->center_freq2 From 1f4ac5a63f897a480fffd0d5c843b03f02c384a5 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 8 Feb 2013 12:07:44 +0100 Subject: [PATCH 126/209] mac80211: explicitly copy channels to VLANs where needed Currently the code assigns channel contexts to VLANs (for use by the TX/RX code) when the AP master gets its channel context assigned. This works fine, but in the upcoming radar detection work the VLANs don't require a channel context (during radar detection) and assigning one to them anyway causes issues with locking and also inconsistencies -- a VLAN interface that is added before radar detection would get the channel context, while one added during it wouldn't. Fix these issues moving the channel context copying to a new explicit operation that will not be used in the radar detection code. Acked-by: Simon Wunderlich Signed-off-by: Johannes Berg --- net/mac80211/cfg.c | 2 ++ net/mac80211/chan.c | 52 +++++++++++++++++++++++++------------- net/mac80211/ieee80211_i.h | 2 ++ 3 files changed, 38 insertions(+), 18 deletions(-) diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index f4f7e7691077..8f6b593a921f 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -933,6 +933,7 @@ static int ieee80211_start_ap(struct wiphy *wiphy, struct net_device *dev, IEEE80211_CHANCTX_SHARED); if (err) return err; + ieee80211_vif_copy_chanctx_to_vlans(sdata, false); /* * Apply control port protocol, this allows us to @@ -1047,6 +1048,7 @@ static int ieee80211_stop_ap(struct wiphy *wiphy, struct net_device *dev) local->total_ps_buffered -= skb_queue_len(&sdata->u.ap.ps.bc_buf); skb_queue_purge(&sdata->u.ap.ps.bc_buf); + ieee80211_vif_copy_chanctx_to_vlans(sdata, true); ieee80211_vif_release_channel(sdata); return 0; diff --git a/net/mac80211/chan.c b/net/mac80211/chan.c index 1bfe0a8b19d2..b5b50762f03e 100644 --- a/net/mac80211/chan.c +++ b/net/mac80211/chan.c @@ -198,15 +198,6 @@ static void __ieee80211_vif_release_channel(struct ieee80211_sub_if_data *sdata) ctx = container_of(conf, struct ieee80211_chanctx, conf); - if (sdata->vif.type == NL80211_IFTYPE_AP) { - struct ieee80211_sub_if_data *vlan; - - /* for the VLAN list */ - ASSERT_RTNL(); - list_for_each_entry(vlan, &sdata->u.ap.vlans, u.vlan.list) - rcu_assign_pointer(vlan->vif.chanctx_conf, NULL); - } - ieee80211_unassign_vif_chanctx(sdata, ctx); if (ctx->refcount == 0) ieee80211_free_chanctx(local, ctx); @@ -326,15 +317,6 @@ int ieee80211_vif_use_channel(struct ieee80211_sub_if_data *sdata, goto out; } - if (sdata->vif.type == NL80211_IFTYPE_AP) { - struct ieee80211_sub_if_data *vlan; - - /* for the VLAN list */ - ASSERT_RTNL(); - list_for_each_entry(vlan, &sdata->u.ap.vlans, u.vlan.list) - rcu_assign_pointer(vlan->vif.chanctx_conf, &ctx->conf); - } - ieee80211_recalc_smps_chanctx(local, ctx); out: mutex_unlock(&local->chanctx_mtx); @@ -369,6 +351,40 @@ void ieee80211_vif_vlan_copy_chanctx(struct ieee80211_sub_if_data *sdata) mutex_unlock(&local->chanctx_mtx); } +void ieee80211_vif_copy_chanctx_to_vlans(struct ieee80211_sub_if_data *sdata, + bool clear) +{ + struct ieee80211_local *local = sdata->local; + struct ieee80211_sub_if_data *vlan; + struct ieee80211_chanctx_conf *conf; + + ASSERT_RTNL(); + + if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_AP)) + return; + + mutex_lock(&local->chanctx_mtx); + + /* + * Check that conf exists, even when clearing this function + * must be called with the AP's channel context still there + * as it would otherwise cause VLANs to have an invalid + * channel context pointer for a while, possibly pointing + * to a channel context that has already been freed. + */ + conf = rcu_dereference_protected(sdata->vif.chanctx_conf, + lockdep_is_held(&local->chanctx_mtx)); + WARN_ON(!conf); + + if (clear) + conf = NULL; + + list_for_each_entry(vlan, &sdata->u.ap.vlans, u.vlan.list) + rcu_assign_pointer(vlan->vif.chanctx_conf, conf); + + mutex_unlock(&local->chanctx_mtx); +} + void ieee80211_iter_chan_contexts_atomic( struct ieee80211_hw *hw, void (*iter)(struct ieee80211_hw *hw, diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 080cf0942ce7..8e884fcbe79b 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1605,6 +1605,8 @@ ieee80211_vif_use_channel(struct ieee80211_sub_if_data *sdata, enum ieee80211_chanctx_mode mode); void ieee80211_vif_release_channel(struct ieee80211_sub_if_data *sdata); void ieee80211_vif_vlan_copy_chanctx(struct ieee80211_sub_if_data *sdata); +void ieee80211_vif_copy_chanctx_to_vlans(struct ieee80211_sub_if_data *sdata, + bool clear); void ieee80211_recalc_smps_chanctx(struct ieee80211_local *local, struct ieee80211_chanctx *chanctx); From 776b3580178f2065838fa0db0eb7a41b57495c0a Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 1 Feb 2013 02:06:18 +0100 Subject: [PATCH 127/209] cfg80211: track hidden SSID networks properly Currently, cfg80211 will copy beacon IEs from a previously received hidden SSID beacon to a probe response entry, if that entry is created after the beacon entry. However, if it is the other way around, or if the beacon is updated, such changes aren't propagated. Fix this by tracking the relation between the probe response and beacon BSS structs in this case. In case drivers have private data stored in a BSS struct and need access to such data from a beacon entry, cfg80211 now provides the hidden_beacon_bss pointer from the probe response entry to the beacon entry. Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 9 ++ net/wireless/core.h | 4 +- net/wireless/scan.c | 273 +++++++++++++++++++++++++++++++++-------- 3 files changed, 232 insertions(+), 54 deletions(-) diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 5d8554bd95da..04a702d1f2a5 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1292,7 +1292,14 @@ struct cfg80211_bss_ies { * either the beacon_ies or proberesp_ies depending on whether Probe * Response frame has been received * @beacon_ies: the information elements from the last Beacon frame + * (implementation note: if @hidden_beacon_bss is set this struct doesn't + * own the beacon_ies, but they're just pointers to the ones from the + * @hidden_beacon_bss struct) * @proberesp_ies: the information elements from the last Probe Response frame + * @hidden_beacon_bss: in case this BSS struct represents a probe response from + * a BSS that hides the SSID in its beacon, this points to the BSS struct + * that holds the beacon data. @beacon_ies is still valid, of course, and + * points to the same data as hidden_beacon_bss->beacon_ies in that case. * @signal: signal strength value (type depends on the wiphy's signal_type) * @priv: private area for driver use, has at least wiphy->bss_priv_size bytes */ @@ -1305,6 +1312,8 @@ struct cfg80211_bss { const struct cfg80211_bss_ies __rcu *beacon_ies; const struct cfg80211_bss_ies __rcu *proberesp_ies; + struct cfg80211_bss *hidden_beacon_bss; + s32 signal; u16 beacon_interval; diff --git a/net/wireless/core.h b/net/wireless/core.h index 8396f7671c8d..37d70dc2fe82 100644 --- a/net/wireless/core.h +++ b/net/wireless/core.h @@ -8,7 +8,6 @@ #include #include #include -#include #include #include #include @@ -124,9 +123,10 @@ static inline void assert_cfg80211_lock(void) struct cfg80211_internal_bss { struct list_head list; + struct list_head hidden_list; struct rb_node rbn; unsigned long ts; - struct kref ref; + unsigned long refcount; atomic_t hold; /* must be last because of priv member */ diff --git a/net/wireless/scan.c b/net/wireless/scan.c index dacb44ac2f74..5e0983d60428 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -19,46 +19,124 @@ #include "wext-compat.h" #include "rdev-ops.h" +/** + * DOC: BSS tree/list structure + * + * At the top level, the BSS list is kept in both a list in each + * registered device (@bss_list) as well as an RB-tree for faster + * lookup. In the RB-tree, entries can be looked up using their + * channel, MESHID, MESHCONF (for MBSSes) or channel, BSSID, SSID + * for other BSSes. + * + * Due to the possibility of hidden SSIDs, there's a second level + * structure, the "hidden_list" and "hidden_beacon_bss" pointer. + * The hidden_list connects all BSSes belonging to a single AP + * that has a hidden SSID, and connects beacon and probe response + * entries. For a probe response entry for a hidden SSID, the + * hidden_beacon_bss pointer points to the BSS struct holding the + * beacon's information. + * + * Reference counting is done for all these references except for + * the hidden_list, so that a beacon BSS struct that is otherwise + * not referenced has one reference for being on the bss_list and + * one for each probe response entry that points to it using the + * hidden_beacon_bss pointer. When a BSS struct that has such a + * pointer is get/put, the refcount update is also propagated to + * the referenced struct, this ensure that it cannot get removed + * while somebody is using the probe response version. + * + * Note that the hidden_beacon_bss pointer never changes, due to + * the reference counting. Therefore, no locking is needed for + * it. + * + * Also note that the hidden_beacon_bss pointer is only relevant + * if the driver uses something other than the IEs, e.g. private + * data stored stored in the BSS struct, since the beacon IEs are + * also linked into the probe response struct. + */ + #define IEEE80211_SCAN_RESULT_EXPIRE (30 * HZ) -static void bss_release(struct kref *ref) +static void bss_free(struct cfg80211_internal_bss *bss) { struct cfg80211_bss_ies *ies; - struct cfg80211_internal_bss *bss; - - bss = container_of(ref, struct cfg80211_internal_bss, ref); if (WARN_ON(atomic_read(&bss->hold))) return; ies = (void *)rcu_access_pointer(bss->pub.beacon_ies); - if (ies) + if (ies && !bss->pub.hidden_beacon_bss) kfree_rcu(ies, rcu_head); ies = (void *)rcu_access_pointer(bss->pub.proberesp_ies); if (ies) kfree_rcu(ies, rcu_head); + /* + * This happens when the module is removed, it doesn't + * really matter any more save for completeness + */ + if (!list_empty(&bss->hidden_list)) + list_del(&bss->hidden_list); + kfree(bss); } -static inline void bss_ref_get(struct cfg80211_internal_bss *bss) +static inline void bss_ref_get(struct cfg80211_registered_device *dev, + struct cfg80211_internal_bss *bss) { - kref_get(&bss->ref); + lockdep_assert_held(&dev->bss_lock); + + bss->refcount++; + if (bss->pub.hidden_beacon_bss) { + bss = container_of(bss->pub.hidden_beacon_bss, + struct cfg80211_internal_bss, + pub); + bss->refcount++; + } } -static inline void bss_ref_put(struct cfg80211_internal_bss *bss) +static inline void bss_ref_put(struct cfg80211_registered_device *dev, + struct cfg80211_internal_bss *bss) { - kref_put(&bss->ref, bss_release); + lockdep_assert_held(&dev->bss_lock); + + if (bss->pub.hidden_beacon_bss) { + struct cfg80211_internal_bss *hbss; + hbss = container_of(bss->pub.hidden_beacon_bss, + struct cfg80211_internal_bss, + pub); + hbss->refcount--; + if (hbss->refcount == 0) + bss_free(hbss); + } + bss->refcount--; + if (bss->refcount == 0) + bss_free(bss); } -static void __cfg80211_unlink_bss(struct cfg80211_registered_device *dev, +static bool __cfg80211_unlink_bss(struct cfg80211_registered_device *dev, struct cfg80211_internal_bss *bss) { lockdep_assert_held(&dev->bss_lock); + if (!list_empty(&bss->hidden_list)) { + /* + * don't remove the beacon entry if it has + * probe responses associated with it + */ + if (!bss->pub.hidden_beacon_bss) + return false; + /* + * if it's a probe response entry break its + * link to the other entries in the group + */ + list_del_init(&bss->hidden_list); + } + list_del_init(&bss->list); rb_erase(&bss->rbn, &dev->bss_tree); - bss_ref_put(bss); + bss_ref_put(dev, bss); + return true; } static void __cfg80211_bss_expire(struct cfg80211_registered_device *dev, @@ -75,8 +153,8 @@ static void __cfg80211_bss_expire(struct cfg80211_registered_device *dev, if (!time_after(expire_time, bss->ts)) continue; - __cfg80211_unlink_bss(dev, bss); - expired = true; + if (__cfg80211_unlink_bss(dev, bss)) + expired = true; } if (expired) @@ -466,7 +544,7 @@ struct cfg80211_bss *cfg80211_get_bss(struct wiphy *wiphy, continue; if (is_bss(&bss->pub, bssid, ssid, ssid_len)) { res = bss; - bss_ref_get(res); + bss_ref_get(dev, res); break; } } @@ -532,23 +610,67 @@ rb_find_bss(struct cfg80211_registered_device *dev, return NULL; } -static void -copy_hidden_ies(struct cfg80211_internal_bss *res, - struct cfg80211_internal_bss *hidden) +static bool cfg80211_combine_bsses(struct cfg80211_registered_device *dev, + struct cfg80211_internal_bss *new) { const struct cfg80211_bss_ies *ies; + struct cfg80211_internal_bss *bss; + const u8 *ie; + int i, ssidlen; + u8 fold = 0; - if (rcu_access_pointer(res->pub.beacon_ies)) - return; - - ies = rcu_access_pointer(hidden->pub.beacon_ies); + ies = rcu_access_pointer(new->pub.beacon_ies); if (WARN_ON(!ies)) - return; + return false; - ies = kmemdup(ies, sizeof(*ies) + ies->len, GFP_ATOMIC); - if (unlikely(!ies)) - return; - rcu_assign_pointer(res->pub.beacon_ies, ies); + ie = cfg80211_find_ie(WLAN_EID_SSID, ies->data, ies->len); + if (!ie) { + /* nothing to do */ + return true; + } + + ssidlen = ie[1]; + for (i = 0; i < ssidlen; i++) + fold |= ie[2 + i]; + + if (fold) { + /* not a hidden SSID */ + return true; + } + + /* This is the bad part ... */ + + list_for_each_entry(bss, &dev->bss_list, list) { + if (!ether_addr_equal(bss->pub.bssid, new->pub.bssid)) + continue; + if (bss->pub.channel != new->pub.channel) + continue; + if (rcu_access_pointer(bss->pub.beacon_ies)) + continue; + ies = rcu_access_pointer(bss->pub.ies); + if (!ies) + continue; + ie = cfg80211_find_ie(WLAN_EID_SSID, ies->data, ies->len); + if (!ie) + continue; + if (ssidlen && ie[1] != ssidlen) + continue; + /* that would be odd ... */ + if (bss->pub.beacon_ies) + continue; + if (WARN_ON_ONCE(bss->pub.hidden_beacon_bss)) + continue; + if (WARN_ON_ONCE(!list_empty(&bss->hidden_list))) + list_del(&bss->hidden_list); + /* combine them */ + list_add(&bss->hidden_list, &new->hidden_list); + bss->pub.hidden_beacon_bss = &new->pub; + new->refcount += bss->refcount; + rcu_assign_pointer(bss->pub.beacon_ies, + new->pub.beacon_ies); + } + + return true; } static struct cfg80211_internal_bss * @@ -594,6 +716,21 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev, rcu_head); } else if (rcu_access_pointer(tmp->pub.beacon_ies)) { const struct cfg80211_bss_ies *old; + struct cfg80211_internal_bss *bss; + + if (found->pub.hidden_beacon_bss && + !list_empty(&found->hidden_list)) { + /* + * The found BSS struct is one of the probe + * response members of a group, but we're + * receiving a beacon (beacon_ies in the tmp + * bss is used). This can only mean that the + * AP changed its beacon from not having an + * SSID to showing it, which is confusing so + * drop this information. + */ + goto drop; + } old = rcu_access_pointer(found->pub.beacon_ies); @@ -605,6 +742,18 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev, rcu_assign_pointer(found->pub.ies, tmp->pub.beacon_ies); + /* Assign beacon IEs to all sub entries */ + list_for_each_entry(bss, &found->hidden_list, + hidden_list) { + const struct cfg80211_bss_ies *ies; + + ies = rcu_access_pointer(bss->pub.beacon_ies); + WARN_ON(ies != old); + + rcu_assign_pointer(bss->pub.beacon_ies, + tmp->pub.beacon_ies); + } + if (old) kfree_rcu((struct cfg80211_bss_ies *)old, rcu_head); @@ -614,24 +763,6 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev, struct cfg80211_internal_bss *hidden; struct cfg80211_bss_ies *ies; - /* First check if the beacon is a probe response from - * a hidden bss. If so, copy beacon ies (with nullified - * ssid) into the probe response bss entry (with real ssid). - * It is required basically for PSM implementation - * (probe responses do not contain tim ie) */ - - /* TODO: The code is not trying to update existing probe - * response bss entries when beacon ies are - * getting changed. */ - hidden = rb_find_bss(dev, tmp, BSS_CMP_HIDE_ZLEN); - if (hidden) { - copy_hidden_ies(tmp, hidden); - } else { - hidden = rb_find_bss(dev, tmp, BSS_CMP_HIDE_NUL); - if (hidden) - copy_hidden_ies(tmp, hidden); - } - /* * create a copy -- the "res" variable that is passed in * is allocated on the stack since it's not needed in the @@ -646,21 +777,51 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev, ies = (void *)rcu_dereference(tmp->pub.proberesp_ies); if (ies) kfree_rcu(ies, rcu_head); - spin_unlock_bh(&dev->bss_lock); - return NULL; + goto drop; } memcpy(new, tmp, sizeof(*new)); - kref_init(&new->ref); + new->refcount = 1; + INIT_LIST_HEAD(&new->hidden_list); + + if (rcu_access_pointer(tmp->pub.proberesp_ies)) { + hidden = rb_find_bss(dev, tmp, BSS_CMP_HIDE_ZLEN); + if (!hidden) + hidden = rb_find_bss(dev, tmp, + BSS_CMP_HIDE_NUL); + if (hidden) { + new->pub.hidden_beacon_bss = &hidden->pub; + list_add(&new->hidden_list, + &hidden->hidden_list); + hidden->refcount++; + rcu_assign_pointer(new->pub.beacon_ies, + hidden->pub.beacon_ies); + } + } else { + /* + * Ok so we found a beacon, and don't have an entry. If + * it's a beacon with hidden SSID, we might be in for an + * expensive search for any probe responses that should + * be grouped with this beacon for updates ... + */ + if (!cfg80211_combine_bsses(dev, new)) { + kfree(new); + goto drop; + } + } + list_add_tail(&new->list, &dev->bss_list); rb_insert_bss(dev, new); found = new; } dev->bss_generation++; + bss_ref_get(dev, found); spin_unlock_bh(&dev->bss_lock); - bss_ref_get(found); return found; + drop: + spin_unlock_bh(&dev->bss_lock); + return NULL; } static struct ieee80211_channel * @@ -820,25 +981,33 @@ EXPORT_SYMBOL(cfg80211_inform_bss_frame); void cfg80211_ref_bss(struct wiphy *wiphy, struct cfg80211_bss *pub) { + struct cfg80211_registered_device *dev = wiphy_to_dev(wiphy); struct cfg80211_internal_bss *bss; if (!pub) return; bss = container_of(pub, struct cfg80211_internal_bss, pub); - bss_ref_get(bss); + + spin_lock_bh(&dev->bss_lock); + bss_ref_get(dev, bss); + spin_unlock_bh(&dev->bss_lock); } EXPORT_SYMBOL(cfg80211_ref_bss); void cfg80211_put_bss(struct wiphy *wiphy, struct cfg80211_bss *pub) { + struct cfg80211_registered_device *dev = wiphy_to_dev(wiphy); struct cfg80211_internal_bss *bss; if (!pub) return; bss = container_of(pub, struct cfg80211_internal_bss, pub); - bss_ref_put(bss); + + spin_lock_bh(&dev->bss_lock); + bss_ref_put(dev, bss); + spin_unlock_bh(&dev->bss_lock); } EXPORT_SYMBOL(cfg80211_put_bss); @@ -854,8 +1023,8 @@ void cfg80211_unlink_bss(struct wiphy *wiphy, struct cfg80211_bss *pub) spin_lock_bh(&dev->bss_lock); if (!list_empty(&bss->list)) { - __cfg80211_unlink_bss(dev, bss); - dev->bss_generation++; + if (__cfg80211_unlink_bss(dev, bss)) + dev->bss_generation++; } spin_unlock_bh(&dev->bss_lock); } From b207cdb07f3f01ec1adaac62e9d0cc918c60a81a Mon Sep 17 00:00:00 2001 From: Alexander Bondar Date: Sat, 22 Dec 2012 10:43:33 +0200 Subject: [PATCH 128/209] mac80211: add vif debugfs driver callbacks Add debugfs driver callbacks so drivers can add debugfs entries for interfaces. Note that they _must_ remove the entries again as add/remove in the driver doesn't correspond to add/remove in debugfs; the former is up/down while the latter is netdev create/destroy. Signed-off-by: Alexander Bondar Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- include/net/mac80211.h | 18 ++++++++++++++++++ net/mac80211/driver-ops.h | 37 +++++++++++++++++++++++++++++++++++++ net/mac80211/iface.c | 4 ++++ 3 files changed, 59 insertions(+) diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 7da11211825d..46e08ba92b97 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -2167,6 +2167,18 @@ enum ieee80211_rate_control_changed { * MAC address of the device going away. * Hence, this callback must be implemented. It can sleep. * + * @add_interface_debugfs: Drivers can use this callback to add debugfs files + * when a vif is added to mac80211. This callback and + * @remove_interface_debugfs should be within a CONFIG_MAC80211_DEBUGFS + * conditional. @remove_interface_debugfs must be provided for cleanup. + * This callback can sleep. + * + * @remove_interface_debugfs: Remove the debugfs files which were added using + * @add_interface_debugfs. This callback must remove all debugfs entries + * that were added because mac80211 only removes interface debugfs when the + * interface is destroyed, not when it is removed from the driver. + * This callback can sleep. + * * @config: Handler for configuration requests. IEEE 802.11 code calls this * function to change hardware configuration, e.g., channel. * This function should never fail but returns a negative error code @@ -2580,6 +2592,12 @@ struct ieee80211_ops { struct ieee80211_vif *vif, struct ieee80211_sta *sta, struct dentry *dir); + void (*add_interface_debugfs)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct dentry *dir); + void (*remove_interface_debugfs)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct dentry *dir); #endif void (*sta_notify)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, enum sta_notify_cmd, struct ieee80211_sta *sta); diff --git a/net/mac80211/driver-ops.h b/net/mac80211/driver-ops.h index 434b3c4f31b5..2b08b9982d06 100644 --- a/net/mac80211/driver-ops.h +++ b/net/mac80211/driver-ops.h @@ -528,6 +528,43 @@ static inline void drv_sta_remove_debugfs(struct ieee80211_local *local, local->ops->sta_remove_debugfs(&local->hw, &sdata->vif, sta, dir); } + +static inline +void drv_add_interface_debugfs(struct ieee80211_local *local, + struct ieee80211_sub_if_data *sdata) +{ + might_sleep(); + + check_sdata_in_driver(sdata); + + if (!local->ops->add_interface_debugfs) + return; + + local->ops->add_interface_debugfs(&local->hw, &sdata->vif, + sdata->debugfs.dir); +} + +static inline +void drv_remove_interface_debugfs(struct ieee80211_local *local, + struct ieee80211_sub_if_data *sdata) +{ + might_sleep(); + + check_sdata_in_driver(sdata); + + if (!local->ops->remove_interface_debugfs) + return; + + local->ops->remove_interface_debugfs(&local->hw, &sdata->vif, + sdata->debugfs.dir); +} +#else +static inline +void drv_add_interface_debugfs(struct ieee80211_local *local, + struct ieee80211_sub_if_data *sdata) {} +static inline +void drv_remove_interface_debugfs(struct ieee80211_local *local, + struct ieee80211_sub_if_data *sdata) {} #endif static inline __must_check diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 0a36dc6346bb..deb78e864af6 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -621,6 +621,8 @@ int ieee80211_do_open(struct wireless_dev *wdev, bool coming_up) goto err_del_interface; } + drv_add_interface_debugfs(local, sdata); + if (sdata->vif.type == NL80211_IFTYPE_AP) { local->fif_pspoll++; local->fif_probe_req++; @@ -882,6 +884,8 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, */ ieee80211_free_keys(sdata); + drv_remove_interface_debugfs(local, sdata); + if (going_down) drv_remove_interface(local, sdata); } From 83c7aa1a1475ae1c42640ab6e4559016142efc67 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 5 Feb 2013 16:51:29 +0100 Subject: [PATCH 129/209] cfg80211: remove scan ies NULL check There's no way scan BSS IEs can be NULL as even if the allocation fails the frame is discarded. Remove some code checking for this and document that it is always non-NULL. Signed-off-by: Johannes Berg --- drivers/net/wireless/mwifiex/sta_ioctl.c | 5 ----- include/net/cfg80211.h | 8 ++++---- net/wireless/scan.c | 11 +++-------- 3 files changed, 7 insertions(+), 17 deletions(-) diff --git a/drivers/net/wireless/mwifiex/sta_ioctl.c b/drivers/net/wireless/mwifiex/sta_ioctl.c index ee85b41a4dfd..8866a2b69c94 100644 --- a/drivers/net/wireless/mwifiex/sta_ioctl.c +++ b/drivers/net/wireless/mwifiex/sta_ioctl.c @@ -162,11 +162,6 @@ int mwifiex_fill_new_bss_desc(struct mwifiex_private *priv, rcu_read_lock(); ies = rcu_dereference(bss->ies); - if (WARN_ON(!ies)) { - /* should never happen */ - rcu_read_unlock(); - return -EINVAL; - } beacon_ie = kmemdup(ies->data, ies->len, GFP_ATOMIC); beacon_ie_len = ies->len; rcu_read_unlock(); diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 04a702d1f2a5..fb766314b3a1 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1287,10 +1287,10 @@ struct cfg80211_bss_ies { * @tsf: timestamp of last received update * @beacon_interval: the beacon interval as from the frame * @capability: the capability field in host byte order - * @ies: the information elements (Note that there - * is no guarantee that these are well-formed!); this is a pointer to - * either the beacon_ies or proberesp_ies depending on whether Probe - * Response frame has been received + * @ies: the information elements (Note that there is no guarantee that these + * are well-formed!); this is a pointer to either the beacon_ies or + * proberesp_ies depending on whether Probe Response frame has been + * received. It is always non-%NULL. * @beacon_ies: the information elements from the last Beacon frame * (implementation note: if @hidden_beacon_bss is set this struct doesn't * own the beacon_ies, but they're just pointers to the ones from the diff --git a/net/wireless/scan.c b/net/wireless/scan.c index 5e0983d60428..02a238329c83 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -1293,15 +1293,10 @@ ieee80211_bss(struct wiphy *wiphy, struct iw_request_info *info, rcu_read_lock(); ies = rcu_dereference(bss->pub.ies); - if (ies) { - rem = ies->len; - ie = ies->data; - } else { - rem = 0; - ie = NULL; - } + rem = ies->len; + ie = ies->data; - while (ies && rem >= 2) { + while (rem >= 2) { /* invalid data */ if (ie[1] > rem - 2) break; From 8cef2c9df88fdd13f518e6607de9d664b31f26cc Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 5 Feb 2013 16:54:31 +0100 Subject: [PATCH 130/209] cfg80211: move TSF into IEs While technically the TSF isn't an IE, it can be necessary to distinguish between the TSF from a beacon and a probe response, in particular in order to know the next DTIM TBTT, as not all APs are spec compliant wrt. TSF==0 being a DTIM TBTT and thus the DTIM count needs to be taken into account as well. To allow this, move the TSF into the IE struct so it can be known whence it came. Signed-off-by: Johannes Berg --- drivers/net/wireless/mwifiex/sta_ioctl.c | 2 +- include/net/cfg80211.h | 5 ++--- net/mac80211/ibss.c | 14 ++++++++---- net/mac80211/mlme.c | 6 +++++- net/wireless/nl80211.c | 27 ++++++++++++++---------- net/wireless/scan.c | 7 +++--- 6 files changed, 37 insertions(+), 24 deletions(-) diff --git a/drivers/net/wireless/mwifiex/sta_ioctl.c b/drivers/net/wireless/mwifiex/sta_ioctl.c index 8866a2b69c94..0d018460daf9 100644 --- a/drivers/net/wireless/mwifiex/sta_ioctl.c +++ b/drivers/net/wireless/mwifiex/sta_ioctl.c @@ -164,6 +164,7 @@ int mwifiex_fill_new_bss_desc(struct mwifiex_private *priv, ies = rcu_dereference(bss->ies); beacon_ie = kmemdup(ies->data, ies->len, GFP_ATOMIC); beacon_ie_len = ies->len; + bss_desc->timestamp = ies->tsf; rcu_read_unlock(); if (!beacon_ie) { @@ -179,7 +180,6 @@ int mwifiex_fill_new_bss_desc(struct mwifiex_private *priv, bss_desc->cap_info_bitmap = bss->capability; bss_desc->bss_band = bss_priv->band; bss_desc->fw_tsf = bss_priv->fw_tsf; - bss_desc->timestamp = bss->tsf; if (bss_desc->cap_info_bitmap & WLAN_CAPABILITY_PRIVACY) { dev_dbg(priv->adapter->dev, "info: InterpretIE: AP WEP enabled\n"); bss_desc->privacy = MWIFIEX_802_11_PRIV_FILTER_8021X_WEP; diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index fb766314b3a1..77686ca28948 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1266,11 +1266,13 @@ enum cfg80211_signal_type { /** * struct cfg80211_bss_ie_data - BSS entry IE data + * @tsf: TSF contained in the frame that carried these IEs * @rcu_head: internal use, for freeing * @len: length of the IEs * @data: IE data */ struct cfg80211_bss_ies { + u64 tsf; struct rcu_head rcu_head; int len; u8 data[]; @@ -1284,7 +1286,6 @@ struct cfg80211_bss_ies { * * @channel: channel this BSS is on * @bssid: BSSID of the BSS - * @tsf: timestamp of last received update * @beacon_interval: the beacon interval as from the frame * @capability: the capability field in host byte order * @ies: the information elements (Note that there is no guarantee that these @@ -1304,8 +1305,6 @@ struct cfg80211_bss_ies { * @priv: private area for driver use, has at least wiphy->bss_priv_size bytes */ struct cfg80211_bss { - u64 tsf; - struct ieee80211_channel *channel; const struct cfg80211_bss_ies __rcu *ies; diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index 71c55cc0f7b6..055fa9436e95 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -242,6 +242,8 @@ static void ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata, u32 basic_rates; int i, j; u16 beacon_int = cbss->beacon_interval; + const struct cfg80211_bss_ies *ies; + u64 tsf; lockdep_assert_held(&sdata->u.ibss.mtx); @@ -265,13 +267,17 @@ static void ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata, } } + rcu_read_lock(); + ies = rcu_dereference(cbss->ies); + tsf = ies->tsf; + rcu_read_unlock(); + __ieee80211_sta_join_ibss(sdata, cbss->bssid, beacon_int, cbss->channel, basic_rates, cbss->capability, - cbss->tsf, - false); + tsf, false); } static struct sta_info *ieee80211_ibss_finish_sta(struct sta_info *sta, @@ -535,8 +541,8 @@ static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata, cbss = container_of((void *)bss, struct cfg80211_bss, priv); - /* was just updated in ieee80211_bss_info_update */ - beacon_timestamp = cbss->tsf; + /* same for beacon and probe response */ + beacon_timestamp = le64_to_cpu(mgmt->u.beacon.timestamp); /* check if we need to merge IBSS */ diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 40ce00c6d4ca..51eca5a0cdaa 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -3667,6 +3667,7 @@ static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata, bool have_higher_than_11mbit; int min_rate = INT_MAX, min_rate_index = -1; struct ieee80211_supported_band *sband; + const struct cfg80211_bss_ies *ies; sband = local->hw.wiphy->bands[cbss->channel->band]; @@ -3710,7 +3711,10 @@ static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata, /* set timing information */ sdata->vif.bss_conf.beacon_int = cbss->beacon_interval; - sdata->vif.bss_conf.sync_tsf = cbss->tsf; + rcu_read_lock(); + ies = rcu_dereference(cbss->ies); + sdata->vif.bss_conf.sync_tsf = ies->tsf; + rcu_read_unlock(); sdata->vif.bss_conf.sync_device_ts = bss->device_ts; /* tell driver about BSSID, basic rates and timing */ diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 807d448e702e..93bc63eae076 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -4997,6 +4997,7 @@ static int nl80211_send_bss(struct sk_buff *msg, struct netlink_callback *cb, const struct cfg80211_bss_ies *ies; void *hdr; struct nlattr *bss; + bool tsf = false; ASSERT_WDEV_LOCK(wdev); @@ -5020,22 +5021,24 @@ static int nl80211_send_bss(struct sk_buff *msg, struct netlink_callback *cb, rcu_read_lock(); ies = rcu_dereference(res->ies); - if (ies && ies->len && nla_put(msg, NL80211_BSS_INFORMATION_ELEMENTS, - ies->len, ies->data)) { - rcu_read_unlock(); - goto nla_put_failure; + if (ies) { + if (nla_put_u64(msg, NL80211_BSS_TSF, ies->tsf)) + goto fail_unlock_rcu; + tsf = true; + if (ies->len && nla_put(msg, NL80211_BSS_INFORMATION_ELEMENTS, + ies->len, ies->data)) + goto fail_unlock_rcu; } ies = rcu_dereference(res->beacon_ies); - if (ies && ies->len && nla_put(msg, NL80211_BSS_BEACON_IES, - ies->len, ies->data)) { - rcu_read_unlock(); - goto nla_put_failure; + if (ies) { + if (!tsf && nla_put_u64(msg, NL80211_BSS_TSF, ies->tsf)) + goto fail_unlock_rcu; + if (ies->len && nla_put(msg, NL80211_BSS_BEACON_IES, + ies->len, ies->data)) + goto fail_unlock_rcu; } rcu_read_unlock(); - if (res->tsf && - nla_put_u64(msg, NL80211_BSS_TSF, res->tsf)) - goto nla_put_failure; if (res->beacon_interval && nla_put_u16(msg, NL80211_BSS_BEACON_INTERVAL, res->beacon_interval)) goto nla_put_failure; @@ -5080,6 +5083,8 @@ static int nl80211_send_bss(struct sk_buff *msg, struct netlink_callback *cb, return genlmsg_end(msg, hdr); + fail_unlock_rcu: + rcu_read_unlock(); nla_put_failure: genlmsg_cancel(msg, hdr); return -EMSGSIZE; diff --git a/net/wireless/scan.c b/net/wireless/scan.c index 02a238329c83..b7a167984986 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -695,7 +695,6 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev, if (found) { found->pub.beacon_interval = tmp->pub.beacon_interval; - found->pub.tsf = tmp->pub.tsf; found->pub.signal = tmp->pub.signal; found->pub.capability = tmp->pub.capability; found->ts = tmp->ts; @@ -880,7 +879,6 @@ cfg80211_inform_bss(struct wiphy *wiphy, memcpy(tmp.pub.bssid, bssid, ETH_ALEN); tmp.pub.channel = channel; tmp.pub.signal = signal; - tmp.pub.tsf = tsf; tmp.pub.beacon_interval = beacon_interval; tmp.pub.capability = capability; /* @@ -895,6 +893,7 @@ cfg80211_inform_bss(struct wiphy *wiphy, if (!ies) return NULL; ies->len = ielen; + ies->tsf = tsf; memcpy(ies->data, ie, ielen); rcu_assign_pointer(tmp.pub.beacon_ies, ies); @@ -951,6 +950,7 @@ cfg80211_inform_bss_frame(struct wiphy *wiphy, if (!ies) return NULL; ies->len = ielen; + ies->tsf = le64_to_cpu(mgmt->u.probe_resp.timestamp); memcpy(ies->data, mgmt->u.probe_resp.variable, ielen); if (ieee80211_is_probe_resp(mgmt->frame_control)) @@ -962,7 +962,6 @@ cfg80211_inform_bss_frame(struct wiphy *wiphy, memcpy(tmp.pub.bssid, mgmt->bssid, ETH_ALEN); tmp.pub.channel = channel; tmp.pub.signal = signal; - tmp.pub.tsf = le64_to_cpu(mgmt->u.probe_resp.timestamp); tmp.pub.beacon_interval = le16_to_cpu(mgmt->u.probe_resp.beacon_int); tmp.pub.capability = le16_to_cpu(mgmt->u.probe_resp.capab_info); @@ -1409,7 +1408,7 @@ ieee80211_bss(struct wiphy *wiphy, struct iw_request_info *info, if (buf) { memset(&iwe, 0, sizeof(iwe)); iwe.cmd = IWEVCUSTOM; - sprintf(buf, "tsf=%016llx", (unsigned long long)(bss->pub.tsf)); + sprintf(buf, "tsf=%016llx", (unsigned long long)(ies->tsf)); iwe.u.data.length = strlen(buf); current_ev = iwe_stream_add_point(info, current_ev, end_buf, &iwe, buf); From ef429dadf33feeb150098dbe84ccaa877e3261f6 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 5 Feb 2013 17:48:40 +0100 Subject: [PATCH 131/209] mac80211: introduce beacon-only timing data In order to be able to predict the next DTIM TBTT in the driver, add the ability to use timing data from beacons only with the new hardware flag IEEE80211_HW_TIMING_BEACON_ONLY and the BSS info value sync_dtim_count which is only valid if the timing data came from a beacon. The data can only come from a beacon, and if no beacon was received before association it is updated later together with the DTIM count notification. Signed-off-by: Johannes Berg --- include/net/mac80211.h | 14 +++++++- net/mac80211/ieee80211_i.h | 2 +- net/mac80211/mlme.c | 65 +++++++++++++++++++++++++++++++++++--- net/mac80211/scan.c | 5 ++- net/mac80211/trace.h | 2 ++ 5 files changed, 81 insertions(+), 7 deletions(-) diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 46e08ba92b97..b9e02460d3d7 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -277,9 +277,16 @@ enum ieee80211_rssi_event { * valid in station mode only if after the driver was notified * with the %BSS_CHANGED_DTIM_PERIOD flag, will be non-zero then. * @sync_tsf: last beacon's/probe response's TSF timestamp (could be old - * as it may have been received during scanning long ago) + * as it may have been received during scanning long ago). If the + * HW flag %IEEE80211_HW_TIMING_BEACON_ONLY is set, then this can + * only come from a beacon, but might not become valid until after + * association when a beacon is received (which is notified with the + * %BSS_CHANGED_DTIM flag.) * @sync_device_ts: the device timestamp corresponding to the sync_tsf, * the driver/device can use this to calculate synchronisation + * (see @sync_tsf) + * @sync_dtim_count: Only valid when %IEEE80211_HW_TIMING_BEACON_ONLY + * is requested, see @sync_tsf/@sync_device_ts. * @beacon_int: beacon interval * @assoc_capability: capabilities taken from assoc resp * @basic_rates: bitmap of basic rates, each bit stands for an @@ -331,6 +338,7 @@ struct ieee80211_bss_conf { u16 assoc_capability; u64 sync_tsf; u32 sync_device_ts; + u8 sync_dtim_count; u32 basic_rates; int mcast_rate[IEEE80211_NUM_BANDS]; u16 ht_operation_mode; @@ -1371,6 +1379,9 @@ struct ieee80211_tx_control { * @IEEE80211_HW_P2P_DEV_ADDR_FOR_INTF: Use the P2P Device address for any * P2P Interface. This will be honoured even if more than one interface * is supported. + * + * @IEEE80211_HW_TIMING_BEACON_ONLY: Use sync timing from beacon frames + * only, to allow getting TBTT of a DTIM beacon. */ enum ieee80211_hw_flags { IEEE80211_HW_HAS_RATE_CONTROL = 1<<0, @@ -1399,6 +1410,7 @@ enum ieee80211_hw_flags { IEEE80211_HW_TX_AMPDU_SETUP_IN_HW = 1<<23, IEEE80211_HW_SCAN_WHILE_IDLE = 1<<24, IEEE80211_HW_P2P_DEV_ADDR_FOR_INTF = 1<<25, + IEEE80211_HW_TIMING_BEACON_ONLY = 1<<26, }; /** diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 8e884fcbe79b..d794856933f2 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -86,7 +86,7 @@ struct ieee80211_fragment_entry { struct ieee80211_bss { - u32 device_ts; + u32 device_ts_beacon, device_ts_presp; bool wmm_used; bool uapsd_supported; diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 51eca5a0cdaa..a29d09cb834c 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -2567,6 +2567,17 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems); ifmgd->assoc_data->have_beacon = true; ifmgd->assoc_data->need_beacon = false; + if (local->hw.flags & IEEE80211_HW_TIMING_BEACON_ONLY) { + sdata->vif.bss_conf.sync_tsf = + le64_to_cpu(mgmt->u.beacon.timestamp); + sdata->vif.bss_conf.sync_device_ts = + rx_status->device_timestamp; + if (elems.tim) + sdata->vif.bss_conf.sync_dtim_count = + elems.tim->dtim_count; + else + sdata->vif.bss_conf.sync_dtim_count = 0; + } /* continue assoc process */ ifmgd->assoc_data->timeout = jiffies; run_again(ifmgd, ifmgd->assoc_data->timeout); @@ -2725,7 +2736,7 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, /* * If we haven't had a beacon before, tell the driver about the - * DTIM period now. + * DTIM period (and beacon timing if desired) now. */ if (!bss_conf->dtim_period) { /* a few bogus AP send dtim_period = 0 or no TIM IE */ @@ -2733,6 +2744,19 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, bss_conf->dtim_period = elems.tim->dtim_period ?: 1; else bss_conf->dtim_period = 1; + + if (local->hw.flags & IEEE80211_HW_TIMING_BEACON_ONLY) { + sdata->vif.bss_conf.sync_tsf = + le64_to_cpu(mgmt->u.beacon.timestamp); + sdata->vif.bss_conf.sync_device_ts = + rx_status->device_timestamp; + if (elems.tim) + sdata->vif.bss_conf.sync_dtim_count = + elems.tim->dtim_count; + else + sdata->vif.bss_conf.sync_dtim_count = 0; + } + changed |= BSS_CHANGED_DTIM_PERIOD; } @@ -3712,10 +3736,33 @@ static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata, /* set timing information */ sdata->vif.bss_conf.beacon_int = cbss->beacon_interval; rcu_read_lock(); - ies = rcu_dereference(cbss->ies); - sdata->vif.bss_conf.sync_tsf = ies->tsf; + ies = rcu_dereference(cbss->beacon_ies); + if (ies) { + const u8 *tim_ie; + + sdata->vif.bss_conf.sync_tsf = ies->tsf; + sdata->vif.bss_conf.sync_device_ts = + bss->device_ts_beacon; + tim_ie = cfg80211_find_ie(WLAN_EID_TIM, + ies->data, ies->len); + if (tim_ie && tim_ie[1] >= 2) + sdata->vif.bss_conf.sync_dtim_count = tim_ie[2]; + else + sdata->vif.bss_conf.sync_dtim_count = 0; + } else if (!(local->hw.flags & + IEEE80211_HW_TIMING_BEACON_ONLY)) { + ies = rcu_dereference(cbss->proberesp_ies); + /* must be non-NULL since beacon IEs were NULL */ + sdata->vif.bss_conf.sync_tsf = ies->tsf; + sdata->vif.bss_conf.sync_device_ts = + bss->device_ts_presp; + sdata->vif.bss_conf.sync_dtim_count = 0; + } else { + sdata->vif.bss_conf.sync_tsf = 0; + sdata->vif.bss_conf.sync_device_ts = 0; + sdata->vif.bss_conf.sync_dtim_count = 0; + } rcu_read_unlock(); - sdata->vif.bss_conf.sync_device_ts = bss->device_ts; /* tell driver about BSSID, basic rates and timing */ ieee80211_bss_info_change_notify(sdata, @@ -4041,13 +4088,23 @@ int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata, const u8 *tim_ie = cfg80211_find_ie(WLAN_EID_TIM, beacon_ies->data, beacon_ies->len); + u8 dtim_count = 0; + if (tim_ie && tim_ie[1] >= sizeof(struct ieee80211_tim_ie)) { const struct ieee80211_tim_ie *tim; tim = (void *)(tim_ie + 2); ifmgd->dtim_period = tim->dtim_period; + dtim_count = tim->dtim_count; } assoc_data->have_beacon = true; assoc_data->timeout = jiffies; + + if (local->hw.flags & IEEE80211_HW_TIMING_BEACON_ONLY) { + sdata->vif.bss_conf.sync_tsf = beacon_ies->tsf; + sdata->vif.bss_conf.sync_device_ts = + bss->device_ts_beacon; + sdata->vif.bss_conf.sync_dtim_count = dtim_count; + } } else { assoc_data->timeout = jiffies; } diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index 400153f7f21f..edd47d9acb99 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -80,7 +80,10 @@ ieee80211_bss_info_update(struct ieee80211_local *local, bss = (void *)cbss->priv; - bss->device_ts = rx_status->device_timestamp; + if (beacon) + bss->device_ts_beacon = rx_status->device_timestamp; + else + bss->device_ts_presp = rx_status->device_timestamp; if (elems->parse_error) { if (beacon) diff --git a/net/mac80211/trace.h b/net/mac80211/trace.h index a2ca72ce3380..0bdd7aeb8958 100644 --- a/net/mac80211/trace.h +++ b/net/mac80211/trace.h @@ -340,6 +340,7 @@ TRACE_EVENT(drv_bss_info_changed, __field(u16, assoc_cap) __field(u64, sync_tsf) __field(u32, sync_device_ts) + __field(u8, sync_dtim_count) __field(u32, basic_rates) __array(int, mcast_rate, IEEE80211_NUM_BANDS) __field(u16, ht_operation_mode) @@ -379,6 +380,7 @@ TRACE_EVENT(drv_bss_info_changed, __entry->assoc_cap = info->assoc_capability; __entry->sync_tsf = info->sync_tsf; __entry->sync_device_ts = info->sync_device_ts; + __entry->sync_dtim_count = info->sync_dtim_count; __entry->basic_rates = info->basic_rates; memcpy(__entry->mcast_rate, info->mcast_rate, sizeof(__entry->mcast_rate)); From 09b85568c142fc1c776dea86a24fcb05f0eeb48b Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 6 Feb 2013 23:07:41 +0100 Subject: [PATCH 132/209] mac80211: remove dynamic PS driver interface The functions were added for some sort of Bluetooth coexistence, but aren't used, so remove them again. Reviewed-by: Luciano Coelho Signed-off-by: Johannes Berg --- include/net/mac80211.h | 39 ----------------------------------- net/mac80211/ieee80211_i.h | 2 -- net/mac80211/mlme.c | 42 ++------------------------------------ 3 files changed, 2 insertions(+), 81 deletions(-) diff --git a/include/net/mac80211.h b/include/net/mac80211.h index b9e02460d3d7..8d25769b3259 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1695,15 +1695,6 @@ void ieee80211_free_txskb(struct ieee80211_hw *hw, struct sk_buff *skb); * dynamic PS feature in stack and will just keep %IEEE80211_CONF_PS * enabled whenever user has enabled powersave. * - * Some hardware need to toggle a single shared antenna between WLAN and - * Bluetooth to facilitate co-existence. These types of hardware set - * limitations on the use of host controlled dynamic powersave whenever there - * is simultaneous WLAN and Bluetooth traffic. For these types of hardware, the - * driver may request temporarily going into full power save, in order to - * enable toggling the antenna between BT and WLAN. If the driver requests - * disabling dynamic powersave, the @dynamic_ps_timeout value will be - * temporarily set to zero until the driver re-enables dynamic powersave. - * * Driver informs U-APSD client support by enabling * %IEEE80211_HW_SUPPORTS_UAPSD flag. The mode is configured through the * uapsd paramater in conf_tx() operation. Hardware needs to send the QoS @@ -3938,36 +3929,6 @@ void ieee80211_connection_loss(struct ieee80211_vif *vif); */ void ieee80211_resume_disconnect(struct ieee80211_vif *vif); -/** - * ieee80211_disable_dyn_ps - force mac80211 to temporarily disable dynamic psm - * - * @vif: &struct ieee80211_vif pointer from the add_interface callback. - * - * Some hardware require full power save to manage simultaneous BT traffic - * on the WLAN frequency. Full PSM is required periodically, whenever there are - * burst of BT traffic. The hardware gets information of BT traffic via - * hardware co-existence lines, and consequentially requests mac80211 to - * (temporarily) enter full psm. - * This function will only temporarily disable dynamic PS, not enable PSM if - * it was not already enabled. - * The driver must make sure to re-enable dynamic PS using - * ieee80211_enable_dyn_ps() if the driver has disabled it. - * - */ -void ieee80211_disable_dyn_ps(struct ieee80211_vif *vif); - -/** - * ieee80211_enable_dyn_ps - restore dynamic psm after being disabled - * - * @vif: &struct ieee80211_vif pointer from the add_interface callback. - * - * This function restores dynamic PS after being temporarily disabled via - * ieee80211_disable_dyn_ps(). Each ieee80211_disable_dyn_ps() call must - * be coupled with an eventual call to this function. - * - */ -void ieee80211_enable_dyn_ps(struct ieee80211_vif *vif); - /** * ieee80211_cqm_rssi_notify - inform a configured connection quality monitoring * rssi threshold triggered diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index d794856933f2..fafeb309a5fe 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1099,8 +1099,6 @@ struct ieee80211_local { * this will override whatever chosen by mac80211 internally. */ int dynamic_ps_forced_timeout; - int dynamic_ps_user_timeout; - bool disable_dynamic_ps; int user_power_level; /* in dBm, for all interfaces */ diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index a29d09cb834c..1e7662c5788e 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -951,39 +951,6 @@ static u32 ieee80211_handle_pwr_constr(struct ieee80211_sub_if_data *sdata, return 0; } -void ieee80211_enable_dyn_ps(struct ieee80211_vif *vif) -{ - struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); - struct ieee80211_local *local = sdata->local; - struct ieee80211_conf *conf = &local->hw.conf; - - WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION || - !(local->hw.flags & IEEE80211_HW_SUPPORTS_PS) || - (local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_PS)); - - local->disable_dynamic_ps = false; - conf->dynamic_ps_timeout = local->dynamic_ps_user_timeout; -} -EXPORT_SYMBOL(ieee80211_enable_dyn_ps); - -void ieee80211_disable_dyn_ps(struct ieee80211_vif *vif) -{ - struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); - struct ieee80211_local *local = sdata->local; - struct ieee80211_conf *conf = &local->hw.conf; - - WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION || - !(local->hw.flags & IEEE80211_HW_SUPPORTS_PS) || - (local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_PS)); - - local->disable_dynamic_ps = true; - conf->dynamic_ps_timeout = 0; - del_timer_sync(&local->dynamic_ps_timer); - ieee80211_queue_work(&local->hw, - &local->dynamic_ps_enable_work); -} -EXPORT_SYMBOL(ieee80211_disable_dyn_ps); - /* powersave */ static void ieee80211_enable_ps(struct ieee80211_local *local, struct ieee80211_sub_if_data *sdata) @@ -1086,7 +1053,6 @@ void ieee80211_recalc_ps(struct ieee80211_local *local, s32 latency) } if (count == 1 && ieee80211_powersave_allowed(found)) { - struct ieee80211_conf *conf = &local->hw.conf; s32 beaconint_us; if (latency < 0) @@ -1110,10 +1076,7 @@ void ieee80211_recalc_ps(struct ieee80211_local *local, s32 latency) else timeout = 100; } - local->dynamic_ps_user_timeout = timeout; - if (!local->disable_dynamic_ps) - conf->dynamic_ps_timeout = - local->dynamic_ps_user_timeout; + local->hw.conf.dynamic_ps_timeout = timeout; if (beaconint_us > latency) { local->ps_sdata = NULL; @@ -1183,8 +1146,7 @@ void ieee80211_dynamic_ps_enable_work(struct work_struct *work) if (local->hw.conf.flags & IEEE80211_CONF_PS) return; - if (!local->disable_dynamic_ps && - local->hw.conf.dynamic_ps_timeout > 0) { + if (local->hw.conf.dynamic_ps_timeout > 0) { /* don't enter PS if TX frames are pending */ if (drv_tx_frames_pending(local)) { mod_timer(&local->dynamic_ps_timer, jiffies + From f1e3e0515646dd0f4c783c1c39839d2706501344 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 6 Feb 2013 23:57:57 +0100 Subject: [PATCH 133/209] mac80211: remove IEEE80211_HW_SCAN_WHILE_IDLE There are only a few drivers that use HW scan, and all of those don't need a non-idle transition before starting the scan -- some don't even care about idle at all. Remove the flag and code associated with it. The only driver that really actually needed this is wl1251 and it can just do it itself in the hw_scan callback -- implement that. Acked-by: Luciano Coelho Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/dvm/mac80211.c | 3 +-- drivers/net/wireless/iwlwifi/mvm/mac80211.c | 1 - drivers/net/wireless/ti/wl1251/event.c | 6 +++++- drivers/net/wireless/ti/wl1251/main.c | 24 ++++++++++++++++----- drivers/net/wireless/ti/wlcore/main.c | 1 - include/net/mac80211.h | 5 ----- net/mac80211/debugfs.c | 2 -- net/mac80211/iface.c | 8 ++----- net/mac80211/main.c | 3 --- 9 files changed, 27 insertions(+), 26 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/dvm/mac80211.c b/drivers/net/wireless/iwlwifi/dvm/mac80211.c index 75f6f6cfdd47..0fccf725a2e6 100644 --- a/drivers/net/wireless/iwlwifi/dvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/dvm/mac80211.c @@ -151,8 +151,7 @@ int iwlagn_mac_setup_register(struct iwl_priv *priv, IEEE80211_HW_QUEUE_CONTROL | IEEE80211_HW_SUPPORTS_PS | IEEE80211_HW_SUPPORTS_DYNAMIC_PS | - IEEE80211_HW_WANT_MONITOR_VIF | - IEEE80211_HW_SCAN_WHILE_IDLE; + IEEE80211_HW_WANT_MONITOR_VIF; hw->offchannel_tx_hw_queue = IWL_AUX_QUEUE; hw->radiotap_mcs_details |= IEEE80211_RADIOTAP_MCS_HAVE_FMT; diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c index ce6127caabdf..bbb8a5b35662 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c @@ -113,7 +113,6 @@ int iwl_mvm_mac_setup_register(struct iwl_mvm *mvm) IEEE80211_HW_REPORTS_TX_ACK_STATUS | IEEE80211_HW_QUEUE_CONTROL | IEEE80211_HW_WANT_MONITOR_VIF | - IEEE80211_HW_SCAN_WHILE_IDLE | IEEE80211_HW_NEED_DTIM_BEFORE_ASSOC | IEEE80211_HW_SUPPORTS_PS | IEEE80211_HW_SUPPORTS_DYNAMIC_PS | diff --git a/drivers/net/wireless/ti/wl1251/event.c b/drivers/net/wireless/ti/wl1251/event.c index 5ec50a476a69..74ae8e1c2e33 100644 --- a/drivers/net/wireless/ti/wl1251/event.c +++ b/drivers/net/wireless/ti/wl1251/event.c @@ -29,6 +29,8 @@ static int wl1251_event_scan_complete(struct wl1251 *wl, struct event_mailbox *mbox) { + int ret = 0; + wl1251_debug(DEBUG_EVENT, "status: 0x%x, channels: %d", mbox->scheduled_scan_status, mbox->scheduled_scan_channels); @@ -37,9 +39,11 @@ static int wl1251_event_scan_complete(struct wl1251 *wl, ieee80211_scan_completed(wl->hw, false); wl1251_debug(DEBUG_MAC80211, "mac80211 hw scan completed"); wl->scanning = false; + if (wl->hw->conf.flags & IEEE80211_CONF_IDLE) + ret = wl1251_ps_set_mode(wl, STATION_IDLE); } - return 0; + return ret; } static void wl1251_event_mbox_dump(struct event_mailbox *mbox) diff --git a/drivers/net/wireless/ti/wl1251/main.c b/drivers/net/wireless/ti/wl1251/main.c index f47e8b0482ad..bbbf68cf50a7 100644 --- a/drivers/net/wireless/ti/wl1251/main.c +++ b/drivers/net/wireless/ti/wl1251/main.c @@ -623,7 +623,7 @@ static int wl1251_op_config(struct ieee80211_hw *hw, u32 changed) } } - if (changed & IEEE80211_CONF_CHANGE_IDLE) { + if (changed & IEEE80211_CONF_CHANGE_IDLE && !wl->scanning) { if (conf->flags & IEEE80211_CONF_IDLE) { ret = wl1251_ps_set_mode(wl, STATION_IDLE); if (ret < 0) @@ -895,11 +895,21 @@ static int wl1251_op_hw_scan(struct ieee80211_hw *hw, if (ret < 0) goto out; + if (hw->conf.flags & IEEE80211_CONF_IDLE) { + ret = wl1251_ps_set_mode(wl, STATION_ACTIVE_MODE); + if (ret < 0) + goto out_sleep; + ret = wl1251_join(wl, wl->bss_type, wl->channel, + wl->beacon_int, wl->dtim_period); + if (ret < 0) + goto out_sleep; + } + skb = ieee80211_probereq_get(wl->hw, wl->vif, ssid, ssid_len, req->ie_len); if (!skb) { ret = -ENOMEM; - goto out; + goto out_idle; } if (req->ie_len) memcpy(skb_put(skb, req->ie_len), req->ie, req->ie_len); @@ -908,11 +918,11 @@ static int wl1251_op_hw_scan(struct ieee80211_hw *hw, skb->len); dev_kfree_skb(skb); if (ret < 0) - goto out_sleep; + goto out_idle; ret = wl1251_cmd_trigger_scan_to(wl, 0); if (ret < 0) - goto out_sleep; + goto out_idle; wl->scanning = true; @@ -920,9 +930,13 @@ static int wl1251_op_hw_scan(struct ieee80211_hw *hw, req->n_channels, WL1251_SCAN_NUM_PROBES); if (ret < 0) { wl->scanning = false; - goto out_sleep; + goto out_idle; } + goto out_sleep; +out_idle: + if (hw->conf.flags & IEEE80211_CONF_IDLE) + ret = wl1251_ps_set_mode(wl, STATION_IDLE); out_sleep: wl1251_ps_elp_sleep(wl); diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index 28a37576d568..2c2ff3e1f849 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -5636,7 +5636,6 @@ static int wl1271_init_ieee80211(struct wl1271 *wl) IEEE80211_HW_AP_LINK_PS | IEEE80211_HW_AMPDU_AGGREGATION | IEEE80211_HW_TX_AMPDU_SETUP_IN_HW | - IEEE80211_HW_SCAN_WHILE_IDLE | IEEE80211_HW_QUEUE_CONTROL; wl->hw->wiphy->cipher_suites = cipher_suites; diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 8d25769b3259..86ad2c341525 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1363,10 +1363,6 @@ struct ieee80211_tx_control { * setup strictly in HW. mac80211 should not attempt to do this in * software. * - * @IEEE80211_HW_SCAN_WHILE_IDLE: The device can do hw scan while - * being idle (i.e. mac80211 doesn't have to go idle-off during the - * the scan). - * * @IEEE80211_HW_WANT_MONITOR_VIF: The driver would like to be informed of * a virtual monitor interface when monitor interfaces are the only * active interfaces. @@ -1408,7 +1404,6 @@ enum ieee80211_hw_flags { IEEE80211_HW_SUPPORTS_PER_STA_GTK = 1<<21, IEEE80211_HW_AP_LINK_PS = 1<<22, IEEE80211_HW_TX_AMPDU_SETUP_IN_HW = 1<<23, - IEEE80211_HW_SCAN_WHILE_IDLE = 1<<24, IEEE80211_HW_P2P_DEV_ADDR_FOR_INTF = 1<<25, IEEE80211_HW_TIMING_BEACON_ONLY = 1<<26, }; diff --git a/net/mac80211/debugfs.c b/net/mac80211/debugfs.c index 8e6040998ba6..b0e32d628114 100644 --- a/net/mac80211/debugfs.c +++ b/net/mac80211/debugfs.c @@ -151,8 +151,6 @@ static ssize_t hwflags_read(struct file *file, char __user *user_buf, sf += snprintf(buf + sf, mxln - sf, "AP_LINK_PS\n"); if (local->hw.flags & IEEE80211_HW_TX_AMPDU_SETUP_IN_HW) sf += snprintf(buf + sf, mxln - sf, "TX_AMPDU_SETUP_IN_HW\n"); - if (local->hw.flags & IEEE80211_HW_SCAN_WHILE_IDLE) - sf += snprintf(buf + sf, mxln - sf, "SCAN_WHILE_IDLE\n"); rv = simple_read_from_buffer(user_buf, count, ppos, buf, strlen(buf)); kfree(buf); diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index deb78e864af6..3ece8eb6d2df 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -151,12 +151,8 @@ static u32 __ieee80211_recalc_idle(struct ieee80211_local *local) } } - sdata = rcu_dereference_protected(local->scan_sdata, - lockdep_is_held(&local->mtx)); - if (sdata && !(local->hw.flags & IEEE80211_HW_SCAN_WHILE_IDLE)) { - scanning = true; - sdata->vif.bss_conf.idle = false; - } + scanning = test_bit(SCAN_SW_SCANNING, &local->scanning) || + test_bit(SCAN_ONCHANNEL_SCANNING, &local->scanning); list_for_each_entry(sdata, &local->interfaces, list) { if (sdata->vif.type == NL80211_IFTYPE_MONITOR || diff --git a/net/mac80211/main.c b/net/mac80211/main.c index 2220331f4b7c..38b3468bc515 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -696,9 +696,6 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) return -EINVAL; #endif - if ((hw->flags & IEEE80211_HW_SCAN_WHILE_IDLE) && !local->ops->hw_scan) - return -EINVAL; - if (!local->use_chanctx) { for (i = 0; i < local->hw.wiphy->n_iface_combinations; i++) { const struct ieee80211_iface_combination *comb; From fd0f979a1b67f0889aea24a7c7d2a54d6706a1cf Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 7 Feb 2013 00:14:51 +0100 Subject: [PATCH 134/209] mac80211: simplify idle handling Now that we have channel contexts, idle is (pretty much) equivalent to not having a channel context. Change the code to use this relation so that there no longer is a need for a lot of idle recalculate calls everywhere. Signed-off-by: Johannes Berg --- net/mac80211/chan.c | 13 ++++++ net/mac80211/ibss.c | 8 ---- net/mac80211/ieee80211_i.h | 3 -- net/mac80211/iface.c | 94 +++++--------------------------------- net/mac80211/mlme.c | 34 -------------- 5 files changed, 25 insertions(+), 127 deletions(-) diff --git a/net/mac80211/chan.c b/net/mac80211/chan.c index b5b50762f03e..038f249966d6 100644 --- a/net/mac80211/chan.c +++ b/net/mac80211/chan.c @@ -91,6 +91,10 @@ ieee80211_new_chanctx(struct ieee80211_local *local, list_add_rcu(&ctx->list, &local->chanctx_list); + mutex_lock(&local->mtx); + ieee80211_recalc_idle(local); + mutex_unlock(&local->mtx); + return ctx; } @@ -110,6 +114,10 @@ static void ieee80211_free_chanctx(struct ieee80211_local *local, list_del_rcu(&ctx->list); kfree_rcu(ctx, rcu_head); + + mutex_lock(&local->mtx); + ieee80211_recalc_idle(local); + mutex_unlock(&local->mtx); } static int ieee80211_assign_vif_chanctx(struct ieee80211_sub_if_data *sdata, @@ -128,6 +136,8 @@ static int ieee80211_assign_vif_chanctx(struct ieee80211_sub_if_data *sdata, ctx->refcount++; ieee80211_recalc_txpower(sdata); + sdata->vif.bss_conf.idle = false; + ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_IDLE); return 0; } @@ -175,6 +185,9 @@ static void ieee80211_unassign_vif_chanctx(struct ieee80211_sub_if_data *sdata, ctx->refcount--; rcu_assign_pointer(sdata->vif.chanctx_conf, NULL); + sdata->vif.bss_conf.idle = true; + ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_IDLE); + drv_unassign_vif_chanctx(local, sdata, ctx); if (ctx->refcount > 0) { diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index 055fa9436e95..2db1f2b90bfe 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -1108,10 +1108,6 @@ int ieee80211_ibss_join(struct ieee80211_sub_if_data *sdata, mutex_unlock(&sdata->u.ibss.mtx); - mutex_lock(&sdata->local->mtx); - ieee80211_recalc_idle(sdata->local); - mutex_unlock(&sdata->local->mtx); - /* * 802.11n-2009 9.13.3.1: In an IBSS, the HT Protection field is * reserved, but an HT STA shall protect HT transmissions as though @@ -1209,9 +1205,5 @@ int ieee80211_ibss_leave(struct ieee80211_sub_if_data *sdata) mutex_unlock(&sdata->u.ibss.mtx); - mutex_lock(&local->mtx); - ieee80211_recalc_idle(sdata->local); - mutex_unlock(&local->mtx); - return 0; } diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index fafeb309a5fe..5635dfc7da34 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -689,9 +689,6 @@ struct ieee80211_sub_if_data { char name[IFNAMSIZ]; - /* to detect idle changes */ - bool old_idle; - /* Fragment table for host-based reassembly */ struct ieee80211_fragment_entry fragments[IEEE80211_FRAGMENT_MAX]; unsigned int fragment_next; diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 3ece8eb6d2df..40ff0307d089 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -78,8 +78,7 @@ void ieee80211_recalc_txpower(struct ieee80211_sub_if_data *sdata) ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_TXPOWER); } -static u32 ieee80211_idle_off(struct ieee80211_local *local, - const char *reason) +static u32 ieee80211_idle_off(struct ieee80211_local *local) { if (!(local->hw.conf.flags & IEEE80211_CONF_IDLE)) return 0; @@ -99,106 +98,45 @@ static u32 ieee80211_idle_on(struct ieee80211_local *local) return IEEE80211_CONF_CHANGE_IDLE; } -static u32 __ieee80211_recalc_idle(struct ieee80211_local *local) +void ieee80211_recalc_idle(struct ieee80211_local *local) { - struct ieee80211_sub_if_data *sdata; - int count = 0; - bool working = false, scanning = false; + bool working = false, scanning, active; unsigned int led_trig_start = 0, led_trig_stop = 0; struct ieee80211_roc_work *roc; + u32 change; -#ifdef CONFIG_PROVE_LOCKING - WARN_ON(debug_locks && !lockdep_rtnl_is_held() && - !lockdep_is_held(&local->iflist_mtx)); -#endif lockdep_assert_held(&local->mtx); - list_for_each_entry(sdata, &local->interfaces, list) { - if (!ieee80211_sdata_running(sdata)) { - sdata->vif.bss_conf.idle = true; - continue; - } - - sdata->old_idle = sdata->vif.bss_conf.idle; - - /* do not count disabled managed interfaces */ - if (sdata->vif.type == NL80211_IFTYPE_STATION && - !sdata->u.mgd.associated && - !sdata->u.mgd.auth_data && - !sdata->u.mgd.assoc_data) { - sdata->vif.bss_conf.idle = true; - continue; - } - /* do not count unused IBSS interfaces */ - if (sdata->vif.type == NL80211_IFTYPE_ADHOC && - !sdata->u.ibss.ssid_len) { - sdata->vif.bss_conf.idle = true; - continue; - } - - if (sdata->vif.type == NL80211_IFTYPE_P2P_DEVICE) - continue; - - /* count everything else */ - sdata->vif.bss_conf.idle = false; - count++; - } + active = !list_empty(&local->chanctx_list); if (!local->ops->remain_on_channel) { list_for_each_entry(roc, &local->roc_list, list) { working = true; - roc->sdata->vif.bss_conf.idle = false; + break; } } scanning = test_bit(SCAN_SW_SCANNING, &local->scanning) || test_bit(SCAN_ONCHANNEL_SCANNING, &local->scanning); - list_for_each_entry(sdata, &local->interfaces, list) { - if (sdata->vif.type == NL80211_IFTYPE_MONITOR || - sdata->vif.type == NL80211_IFTYPE_AP_VLAN || - sdata->vif.type == NL80211_IFTYPE_P2P_DEVICE) - continue; - if (sdata->old_idle == sdata->vif.bss_conf.idle) - continue; - if (!ieee80211_sdata_running(sdata)) - continue; - ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_IDLE); - } - if (working || scanning) led_trig_start |= IEEE80211_TPT_LEDTRIG_FL_WORK; else led_trig_stop |= IEEE80211_TPT_LEDTRIG_FL_WORK; - if (count) + if (active) led_trig_start |= IEEE80211_TPT_LEDTRIG_FL_CONNECTED; else led_trig_stop |= IEEE80211_TPT_LEDTRIG_FL_CONNECTED; ieee80211_mod_tpt_led_trig(local, led_trig_start, led_trig_stop); - if (working) - return ieee80211_idle_off(local, "working"); - if (scanning) - return ieee80211_idle_off(local, "scanning"); - if (!count) - return ieee80211_idle_on(local); + if (working || scanning || active) + change = ieee80211_idle_off(local); else - return ieee80211_idle_off(local, "in use"); - - return 0; -} - -void ieee80211_recalc_idle(struct ieee80211_local *local) -{ - u32 chg; - - mutex_lock(&local->iflist_mtx); - chg = __ieee80211_recalc_idle(local); - mutex_unlock(&local->iflist_mtx); - if (chg) - ieee80211_hw_config(local, chg); + change = ieee80211_idle_on(local); + if (change) + ieee80211_hw_config(local, change); } static int ieee80211_change_mtu(struct net_device *dev, int new_mtu) @@ -692,10 +630,6 @@ int ieee80211_do_open(struct wireless_dev *wdev, bool coming_up) if (sdata->flags & IEEE80211_SDATA_PROMISC) atomic_inc(&local->iff_promiscs); - mutex_lock(&local->mtx); - hw_reconf_flags |= __ieee80211_recalc_idle(local); - mutex_unlock(&local->mtx); - if (coming_up) local->open_count++; @@ -888,10 +822,6 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, sdata->bss = NULL; - mutex_lock(&local->mtx); - hw_reconf_flags |= __ieee80211_recalc_idle(local); - mutex_unlock(&local->mtx); - ieee80211_recalc_ps(local, -1); if (local->open_count == 0) { diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 1e7662c5788e..3bcf39365be8 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1792,7 +1792,6 @@ EXPORT_SYMBOL(ieee80211_ap_probereq_get); static void __ieee80211_disconnect(struct ieee80211_sub_if_data *sdata) { struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; - struct ieee80211_local *local = sdata->local; u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN]; mutex_lock(&ifmgd->mtx); @@ -1812,10 +1811,6 @@ static void __ieee80211_disconnect(struct ieee80211_sub_if_data *sdata) * but that's not a problem. */ cfg80211_send_deauth(sdata->dev, frame_buf, IEEE80211_DEAUTH_FRAME_LEN); - - mutex_lock(&local->mtx); - ieee80211_recalc_idle(local); - mutex_unlock(&local->mtx); } static void ieee80211_beacon_connection_loss_work(struct work_struct *work) @@ -2048,10 +2043,6 @@ ieee80211_rx_mgmt_deauth(struct ieee80211_sub_if_data *sdata, ieee80211_set_disassoc(sdata, 0, 0, false, NULL); - mutex_lock(&sdata->local->mtx); - ieee80211_recalc_idle(sdata->local); - mutex_unlock(&sdata->local->mtx); - return RX_MGMT_CFG80211_DEAUTH; } @@ -2079,10 +2070,6 @@ ieee80211_rx_mgmt_disassoc(struct ieee80211_sub_if_data *sdata, ieee80211_set_disassoc(sdata, 0, 0, false, NULL); - mutex_lock(&sdata->local->mtx); - ieee80211_recalc_idle(sdata->local); - mutex_unlock(&sdata->local->mtx); - return RX_MGMT_CFG80211_DISASSOC; } @@ -2839,7 +2826,6 @@ static void ieee80211_sta_timer(unsigned long data) static void ieee80211_sta_connection_lost(struct ieee80211_sub_if_data *sdata, u8 *bssid, u8 reason, bool tx) { - struct ieee80211_local *local = sdata->local; struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN]; @@ -2853,10 +2839,6 @@ static void ieee80211_sta_connection_lost(struct ieee80211_sub_if_data *sdata, */ cfg80211_send_deauth(sdata->dev, frame_buf, IEEE80211_DEAUTH_FRAME_LEN); - mutex_lock(&local->mtx); - ieee80211_recalc_idle(local); - mutex_unlock(&local->mtx); - mutex_lock(&ifmgd->mtx); } @@ -3127,10 +3109,6 @@ void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata) } mutex_unlock(&ifmgd->mtx); - - mutex_lock(&local->mtx); - ieee80211_recalc_idle(local); - mutex_unlock(&local->mtx); } static void ieee80211_sta_bcn_mon_timer(unsigned long data) @@ -3644,10 +3622,6 @@ static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata, return -ENOMEM; } - mutex_lock(&local->mtx); - ieee80211_recalc_idle(sdata->local); - mutex_unlock(&local->mtx); - if (new_sta) { u32 rates = 0, basic_rates = 0; bool have_higher_than_11mbit; @@ -4138,10 +4112,6 @@ int ieee80211_mgd_deauth(struct ieee80211_sub_if_data *sdata, mutex_unlock(&ifmgd->mtx); out: - mutex_lock(&sdata->local->mtx); - ieee80211_recalc_idle(sdata->local); - mutex_unlock(&sdata->local->mtx); - if (sent_frame) __cfg80211_send_deauth(sdata->dev, frame_buf, IEEE80211_DEAUTH_FRAME_LEN); @@ -4182,10 +4152,6 @@ int ieee80211_mgd_disassoc(struct ieee80211_sub_if_data *sdata, __cfg80211_send_disassoc(sdata->dev, frame_buf, IEEE80211_DEAUTH_FRAME_LEN); - mutex_lock(&sdata->local->mtx); - ieee80211_recalc_idle(sdata->local); - mutex_unlock(&sdata->local->mtx); - return 0; } From 3e4d40fa118e58ce51e85015587a944ec5c69400 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 7 Feb 2013 17:19:08 +0100 Subject: [PATCH 135/209] mac80211: remove unused code to mark AP station authenticated When we get to association, the AP station already exists and is marked authenticated, so moving it into IEEE80211_STA_AUTH again is a NOP, remove it. Signed-off-by: Johannes Berg --- net/mac80211/mlme.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 3bcf39365be8..76cacdb062c8 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -2212,9 +2212,7 @@ static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata, if (elems.wmm_param) set_sta_flag(sta, WLAN_STA_WME); - err = sta_info_move_state(sta, IEEE80211_STA_AUTH); - if (!err) - err = sta_info_move_state(sta, IEEE80211_STA_ASSOC); + err = sta_info_move_state(sta, IEEE80211_STA_ASSOC); if (!err && !(ifmgd->flags & IEEE80211_STA_CONTROL_PORT)) err = sta_info_move_state(sta, IEEE80211_STA_AUTHORIZED); if (err) { From dd5ee59bb005df38ca3ee00bc6ac349dc3370e4f Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Mon, 4 Feb 2013 15:38:23 +0530 Subject: [PATCH 136/209] ath9k: Fix ATH9K_HW_CAP_HT usage There are a few places where the station's HT capabilities should be checked instead of ATH9K_HW_CAP_HT, which is a global feature for the driver. Fix this. Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/main.c | 13 +++++-------- drivers/net/wireless/ath/ath9k/xmit.c | 5 ++--- 2 files changed, 7 insertions(+), 11 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 5432f1247e2e..6e66f9c6782b 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -320,28 +320,25 @@ static void ath_node_attach(struct ath_softc *sc, struct ieee80211_sta *sta, struct ieee80211_vif *vif) { struct ath_node *an; - u8 density; an = (struct ath_node *)sta->drv_priv; an->sc = sc; an->sta = sta; an->vif = vif; - if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_HT) { - ath_tx_node_init(sc, an); + ath_tx_node_init(sc, an); + + if (sta->ht_cap.ht_supported) { an->maxampdu = 1 << (IEEE80211_HT_MAX_AMPDU_FACTOR + sta->ht_cap.ampdu_factor); - density = ath9k_parse_mpdudensity(sta->ht_cap.ampdu_density); - an->mpdudensity = density; + an->mpdudensity = ath9k_parse_mpdudensity(sta->ht_cap.ampdu_density); } } static void ath_node_detach(struct ath_softc *sc, struct ieee80211_sta *sta) { struct ath_node *an = (struct ath_node *)sta->drv_priv; - - if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_HT) - ath_tx_node_cleanup(sc, an); + ath_tx_node_cleanup(sc, an); } void ath9k_tasklet(unsigned long data) diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index feacaafee959..89a64411b82e 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -1233,7 +1233,7 @@ int ath_tx_aggr_start(struct ath_softc *sc, struct ieee80211_sta *sta, * in HT IBSS when a beacon with HT-info is received after the station * has already been added. */ - if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_HT) { + if (sta->ht_cap.ht_supported) { an->maxampdu = 1 << (IEEE80211_HT_MAX_AMPDU_FACTOR + sta->ht_cap.ampdu_factor); density = ath9k_parse_mpdudensity(sta->ht_cap.ampdu_density); @@ -1904,8 +1904,7 @@ static void ath_tx_start_dma(struct ath_softc *sc, struct sk_buff *skb, struct ath_buf *bf; u8 tidno; - if ((sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_HT) && txctl->an && - ieee80211_is_data_qos(hdr->frame_control)) { + if (txctl->an && ieee80211_is_data_qos(hdr->frame_control)) { tidno = ieee80211_get_qos_ctl(hdr)[0] & IEEE80211_QOS_CTL_TID_MASK; tid = ATH_AN_2_TID(txctl->an, tidno); From 1a6404a1d8497692f31808319d662c739033c491 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Mon, 4 Feb 2013 15:38:24 +0530 Subject: [PATCH 137/209] ath9k: Fix IBSS joiner mode On joining an existing IBSS network, beaconing has to start only after a TSF sync has happened by receiving a beacon from the BSS. In creator mode, beaconing can start immediately after a HW reset has been done. Now that mac80211 notifies the driver of the mode type (creator/joiner) via ieee80211_bss_conf->ibss_creator, make use of it to properly setup the HW beacon timers. Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ath9k.h | 1 + drivers/net/wireless/ath/ath9k/beacon.c | 113 ++++++++++++++++++------ drivers/net/wireless/ath/ath9k/recv.c | 2 +- 3 files changed, 89 insertions(+), 27 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index 97c90b21e1cb..a56b2416e2f9 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -389,6 +389,7 @@ struct ath_beacon_config { u16 bmiss_timeout; u8 dtim_count; bool enable_beacon; + bool ibss_creator; }; struct ath_beacon { diff --git a/drivers/net/wireless/ath/ath9k/beacon.c b/drivers/net/wireless/ath/ath9k/beacon.c index dd3771954bd7..5f05c26d1ec4 100644 --- a/drivers/net/wireless/ath/ath9k/beacon.c +++ b/drivers/net/wireless/ath/ath9k/beacon.c @@ -407,12 +407,17 @@ void ath9k_beacon_tasklet(unsigned long data) } } -static void ath9k_beacon_init(struct ath_softc *sc, u32 nexttbtt, u32 intval) +/* + * Both nexttbtt and intval have to be in usecs. + */ +static void ath9k_beacon_init(struct ath_softc *sc, u32 nexttbtt, + u32 intval, bool reset_tsf) { struct ath_hw *ah = sc->sc_ah; ath9k_hw_disable_interrupts(ah); - ath9k_hw_reset_tsf(ah); + if (reset_tsf) + ath9k_hw_reset_tsf(ah); ath9k_beaconq_config(sc); ath9k_hw_beaconinit(ah, nexttbtt, intval); sc->beacon.bmisscnt = 0; @@ -442,10 +447,12 @@ static void ath9k_beacon_config_ap(struct ath_softc *sc, else ah->imask &= ~ATH9K_INT_SWBA; - ath_dbg(common, BEACON, "AP nexttbtt: %u intval: %u conf_intval: %u\n", + ath_dbg(common, BEACON, + "AP (%s) nexttbtt: %u intval: %u conf_intval: %u\n", + (conf->enable_beacon) ? "Enable" : "Disable", nexttbtt, intval, conf->beacon_interval); - ath9k_beacon_init(sc, nexttbtt, intval); + ath9k_beacon_init(sc, nexttbtt, intval, true); } /* @@ -586,17 +593,45 @@ static void ath9k_beacon_config_adhoc(struct ath_softc *sc, ath9k_reset_beacon_status(sc); intval = TU_TO_USEC(conf->beacon_interval); - nexttbtt = intval; + + if (conf->ibss_creator) { + nexttbtt = intval; + } else { + u32 tbtt, offset, tsftu; + u64 tsf; + + /* + * Pull nexttbtt forward to reflect the current + * sync'd TSF. + */ + tsf = ath9k_hw_gettsf64(ah); + tsftu = TSF_TO_TU(tsf >> 32, tsf) + FUDGE; + offset = tsftu % conf->beacon_interval; + tbtt = tsftu - offset; + if (offset) + tbtt += conf->beacon_interval; + + nexttbtt = TU_TO_USEC(tbtt); + } if (conf->enable_beacon) ah->imask |= ATH9K_INT_SWBA; else ah->imask &= ~ATH9K_INT_SWBA; - ath_dbg(common, BEACON, "IBSS nexttbtt: %u intval: %u conf_intval: %u\n", + ath_dbg(common, BEACON, + "IBSS (%s) nexttbtt: %u intval: %u conf_intval: %u\n", + (conf->enable_beacon) ? "Enable" : "Disable", nexttbtt, intval, conf->beacon_interval); - ath9k_beacon_init(sc, nexttbtt, intval); + ath9k_beacon_init(sc, nexttbtt, intval, conf->ibss_creator); + + /* + * Set the global 'beacon has been configured' flag for the + * joiner case in IBSS mode. + */ + if (!conf->ibss_creator && conf->enable_beacon) + set_bit(SC_OP_BEACONS, &sc->sc_flags); } bool ath9k_allow_beacon_config(struct ath_softc *sc, struct ieee80211_vif *vif) @@ -639,6 +674,7 @@ static void ath9k_cache_beacon_config(struct ath_softc *sc, cur_conf->dtim_period = bss_conf->dtim_period; cur_conf->listen_interval = 1; cur_conf->dtim_count = 1; + cur_conf->ibss_creator = bss_conf->ibss_creator; cur_conf->bmiss_timeout = ATH_DEFAULT_BMISS_LIMIT * cur_conf->beacon_interval; @@ -666,34 +702,59 @@ void ath9k_beacon_config(struct ath_softc *sc, struct ieee80211_vif *vif, { struct ieee80211_bss_conf *bss_conf = &vif->bss_conf; struct ath_beacon_config *cur_conf = &sc->cur_beacon_conf; + unsigned long flags; + bool skip_beacon = false; if (sc->sc_ah->opmode == NL80211_IFTYPE_STATION) { ath9k_cache_beacon_config(sc, bss_conf); ath9k_set_beacon(sc); set_bit(SC_OP_BEACONS, &sc->sc_flags); - } else { + return; + + } + + /* + * Take care of multiple interfaces when + * enabling/disabling SWBA. + */ + if (changed & BSS_CHANGED_BEACON_ENABLED) { + if (!bss_conf->enable_beacon && + (sc->nbcnvifs <= 1)) { + cur_conf->enable_beacon = false; + } else if (bss_conf->enable_beacon) { + cur_conf->enable_beacon = true; + ath9k_cache_beacon_config(sc, bss_conf); + } + } + + /* + * Configure the HW beacon registers only when we have a valid + * beacon interval. + */ + if (cur_conf->beacon_interval) { /* - * Take care of multiple interfaces when - * enabling/disabling SWBA. + * If we are joining an existing IBSS network, start beaconing + * only after a TSF-sync has taken place. Ensure that this + * happens by setting the appropriate flags. */ - if (changed & BSS_CHANGED_BEACON_ENABLED) { - if (!bss_conf->enable_beacon && - (sc->nbcnvifs <= 1)) { - cur_conf->enable_beacon = false; - } else if (bss_conf->enable_beacon) { - cur_conf->enable_beacon = true; - ath9k_cache_beacon_config(sc, bss_conf); - } - } - - if (cur_conf->beacon_interval) { + if ((changed & BSS_CHANGED_IBSS) && !bss_conf->ibss_creator && + bss_conf->enable_beacon) { + spin_lock_irqsave(&sc->sc_pm_lock, flags); + sc->ps_flags |= PS_BEACON_SYNC | PS_WAIT_FOR_BEACON; + spin_unlock_irqrestore(&sc->sc_pm_lock, flags); + skip_beacon = true; + } else { ath9k_set_beacon(sc); - - if (cur_conf->enable_beacon) - set_bit(SC_OP_BEACONS, &sc->sc_flags); - else - clear_bit(SC_OP_BEACONS, &sc->sc_flags); } + + /* + * Do not set the SC_OP_BEACONS flag for IBSS joiner mode + * here, it is done in ath9k_beacon_config_adhoc(). + */ + if (cur_conf->enable_beacon && !skip_beacon) + set_bit(SC_OP_BEACONS, &sc->sc_flags); + else + clear_bit(SC_OP_BEACONS, &sc->sc_flags); } } diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 2d0fd17a1917..ee156e543147 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -533,7 +533,7 @@ static void ath_rx_ps_beacon(struct ath_softc *sc, struct sk_buff *skb) if (sc->ps_flags & PS_BEACON_SYNC) { sc->ps_flags &= ~PS_BEACON_SYNC; ath_dbg(common, PS, - "Reconfigure Beacon timers based on timestamp from the AP\n"); + "Reconfigure beacon timers based on synchronized timestamp\n"); ath9k_set_beacon(sc); } From dd04e6acd828d51255fbb2d9b7b0e5b85df04f0b Mon Sep 17 00:00:00 2001 From: Avinash Patil Date: Fri, 8 Feb 2013 18:18:06 -0800 Subject: [PATCH 138/209] mwifiex: store card specific data in PCI device table entry This patch adds support for storing PCIe device specific data into driver_data structure of pci_device_id. When a device with known device_id is probed, we use this driver_data to populate card specific structres in driver. This enables to remove device specific defines for scratch registers, firmware name, FW download block size, etc. from source code. This will make addition of support for new chipsets a lot easier. Signed-off-by: Avinash Patil Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/pcie.c | 211 ++++++++++++++++------------ drivers/net/wireless/mwifiex/pcie.h | 113 +++++++++++---- 2 files changed, 206 insertions(+), 118 deletions(-) diff --git a/drivers/net/wireless/mwifiex/pcie.c b/drivers/net/wireless/mwifiex/pcie.c index df88e65595c8..29c539b9424b 100644 --- a/drivers/net/wireless/mwifiex/pcie.c +++ b/drivers/net/wireless/mwifiex/pcie.c @@ -94,6 +94,13 @@ static int mwifiex_pcie_probe(struct pci_dev *pdev, card->dev = pdev; + if (ent->driver_data) { + struct mwifiex_pcie_device *data = (void *)ent->driver_data; + card->pcie.firmware = data->firmware; + card->pcie.reg = data->reg; + card->pcie.blksz_fw_dl = data->blksz_fw_dl; + } + if (mwifiex_add_card(card, &add_remove_card_sem, &pcie_ops, MWIFIEX_PCIE)) { pr_err("%s failed\n", __func__); @@ -237,6 +244,7 @@ static DEFINE_PCI_DEVICE_TABLE(mwifiex_ids) = { { PCIE_VENDOR_ID_MARVELL, PCIE_DEVICE_ID_MARVELL_88W8766P, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + .driver_data = (unsigned long) &mwifiex_pcie8766, }, {}, }; @@ -369,6 +377,7 @@ static int mwifiex_pcie_enable_host_int(struct mwifiex_adapter *adapter) static int mwifiex_pcie_create_txbd_ring(struct mwifiex_adapter *adapter) { struct pcie_service_card *card = adapter->card; + const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; int i; /* @@ -377,7 +386,7 @@ static int mwifiex_pcie_create_txbd_ring(struct mwifiex_adapter *adapter) * starts at zero with rollover bit set */ card->txbd_wrptr = 0; - card->txbd_rdptr |= MWIFIEX_BD_FLAG_ROLLOVER_IND; + card->txbd_rdptr |= reg->tx_rollover_ind; /* allocate shared memory for the BD ring and divide the same in to several descriptors */ @@ -417,6 +426,7 @@ static int mwifiex_pcie_create_txbd_ring(struct mwifiex_adapter *adapter) static int mwifiex_pcie_delete_txbd_ring(struct mwifiex_adapter *adapter) { struct pcie_service_card *card = adapter->card; + const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; struct sk_buff *skb; int i; @@ -440,7 +450,7 @@ static int mwifiex_pcie_delete_txbd_ring(struct mwifiex_adapter *adapter) card->txbd_ring_pbase); card->txbd_ring_size = 0; card->txbd_wrptr = 0; - card->txbd_rdptr = 0 | MWIFIEX_BD_FLAG_ROLLOVER_IND; + card->txbd_rdptr = 0 | reg->tx_rollover_ind; card->txbd_ring_vbase = NULL; card->txbd_ring_pbase = 0; @@ -453,6 +463,7 @@ static int mwifiex_pcie_delete_txbd_ring(struct mwifiex_adapter *adapter) static int mwifiex_pcie_create_rxbd_ring(struct mwifiex_adapter *adapter) { struct pcie_service_card *card = adapter->card; + const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; struct sk_buff *skb; int i; dma_addr_t buf_pa; @@ -463,7 +474,7 @@ static int mwifiex_pcie_create_rxbd_ring(struct mwifiex_adapter *adapter) * starts at zero with rollover bit set */ card->rxbd_wrptr = 0; - card->rxbd_rdptr |= MWIFIEX_BD_FLAG_ROLLOVER_IND; + card->rxbd_rdptr = reg->rx_rollover_ind; card->rxbd_ring_size = sizeof(struct mwifiex_pcie_buf_desc) * MWIFIEX_MAX_TXRX_BD; @@ -526,6 +537,7 @@ static int mwifiex_pcie_create_rxbd_ring(struct mwifiex_adapter *adapter) static int mwifiex_pcie_delete_rxbd_ring(struct mwifiex_adapter *adapter) { struct pcie_service_card *card = adapter->card; + const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; struct sk_buff *skb; int i; @@ -550,7 +562,7 @@ static int mwifiex_pcie_delete_rxbd_ring(struct mwifiex_adapter *adapter) card->rxbd_ring_pbase); card->rxbd_ring_size = 0; card->rxbd_wrptr = 0; - card->rxbd_rdptr = 0 | MWIFIEX_BD_FLAG_ROLLOVER_IND; + card->rxbd_rdptr = 0 | reg->rx_rollover_ind; card->rxbd_ring_vbase = NULL; card->rxbd_ring_pbase = 0; @@ -563,6 +575,7 @@ static int mwifiex_pcie_delete_rxbd_ring(struct mwifiex_adapter *adapter) static int mwifiex_pcie_create_evtbd_ring(struct mwifiex_adapter *adapter) { struct pcie_service_card *card = adapter->card; + const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; struct sk_buff *skb; int i; dma_addr_t buf_pa; @@ -573,7 +586,7 @@ static int mwifiex_pcie_create_evtbd_ring(struct mwifiex_adapter *adapter) * starts at zero with rollover bit set */ card->evtbd_wrptr = 0; - card->evtbd_rdptr |= MWIFIEX_BD_FLAG_ROLLOVER_IND; + card->evtbd_rdptr = reg->evt_rollover_ind; card->evtbd_ring_size = sizeof(struct mwifiex_pcie_buf_desc) * MWIFIEX_MAX_EVT_BD; @@ -636,6 +649,7 @@ static int mwifiex_pcie_create_evtbd_ring(struct mwifiex_adapter *adapter) static int mwifiex_pcie_delete_evtbd_ring(struct mwifiex_adapter *adapter) { struct pcie_service_card *card = adapter->card; + const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; struct sk_buff *skb; int i; @@ -658,7 +672,7 @@ static int mwifiex_pcie_delete_evtbd_ring(struct mwifiex_adapter *adapter) card->evtbd_ring_vbase, card->evtbd_ring_pbase); card->evtbd_wrptr = 0; - card->evtbd_rdptr = 0 | MWIFIEX_BD_FLAG_ROLLOVER_IND; + card->evtbd_rdptr = 0 | reg->evt_rollover_ind; card->evtbd_ring_size = 0; card->evtbd_ring_vbase = NULL; card->evtbd_ring_pbase = 0; @@ -771,12 +785,13 @@ static int mwifiex_pcie_delete_sleep_cookie_buf(struct mwifiex_adapter *adapter) static int mwifiex_clean_pcie_ring_buf(struct mwifiex_adapter *adapter) { struct pcie_service_card *card = adapter->card; + const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; u32 rdptr; /* Read the TX ring read pointer set by firmware */ - if (mwifiex_read_reg(adapter, REG_TXBD_RDPTR, &rdptr)) { + if (mwifiex_read_reg(adapter, reg->tx_rdptr, &rdptr)) { dev_err(adapter->dev, - "Flush TXBD: failed to read REG_TXBD_RDPTR\n"); + "Flush TXBD: failed to read reg->tx_rdptr\n"); return -1; } @@ -805,14 +820,15 @@ static int mwifiex_pcie_send_data_complete(struct mwifiex_adapter *adapter) dma_addr_t buf_pa; u32 wrdoneidx, rdptr, unmap_count = 0; struct pcie_service_card *card = adapter->card; + const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; if (!mwifiex_pcie_ok_to_access_hw(adapter)) mwifiex_pm_wakeup_card(adapter); /* Read the TX ring read pointer set by firmware */ - if (mwifiex_read_reg(adapter, REG_TXBD_RDPTR, &rdptr)) { + if (mwifiex_read_reg(adapter, reg->tx_rdptr, &rdptr)) { dev_err(adapter->dev, - "SEND COMP: failed to read REG_TXBD_RDPTR\n"); + "SEND COMP: failed to read reg->tx_rdptr\n"); return -1; } @@ -820,11 +836,11 @@ static int mwifiex_pcie_send_data_complete(struct mwifiex_adapter *adapter) card->txbd_rdptr, rdptr); /* free from previous txbd_rdptr to current txbd_rdptr */ - while (((card->txbd_rdptr & MWIFIEX_TXBD_MASK) != - (rdptr & MWIFIEX_TXBD_MASK)) || - ((card->txbd_rdptr & MWIFIEX_BD_FLAG_ROLLOVER_IND) != - (rdptr & MWIFIEX_BD_FLAG_ROLLOVER_IND))) { - wrdoneidx = card->txbd_rdptr & MWIFIEX_TXBD_MASK; + while (((card->txbd_rdptr & reg->tx_mask) != + (rdptr & reg->tx_mask)) || + ((card->txbd_rdptr & reg->tx_rollover_ind) != + (rdptr & reg->tx_rollover_ind))) { + wrdoneidx = card->txbd_rdptr & reg->tx_mask; skb = card->tx_buf_list[wrdoneidx]; if (skb) { @@ -850,20 +866,20 @@ static int mwifiex_pcie_send_data_complete(struct mwifiex_adapter *adapter) card->txbd_ring[wrdoneidx]->flags = 0; card->txbd_rdptr++; - if ((card->txbd_rdptr & MWIFIEX_TXBD_MASK) == num_tx_buffs) + if ((card->txbd_rdptr & reg->tx_mask) == num_tx_buffs) card->txbd_rdptr = ((card->txbd_rdptr & - MWIFIEX_BD_FLAG_ROLLOVER_IND) ^ - MWIFIEX_BD_FLAG_ROLLOVER_IND); + reg->tx_rollover_ind) ^ + reg->tx_rollover_ind); } if (unmap_count) adapter->data_sent = false; if (card->txbd_flush) { - if (((card->txbd_wrptr & MWIFIEX_TXBD_MASK) == - (card->txbd_rdptr & MWIFIEX_TXBD_MASK)) && - ((card->txbd_wrptr & MWIFIEX_BD_FLAG_ROLLOVER_IND) != - (card->txbd_rdptr & MWIFIEX_BD_FLAG_ROLLOVER_IND))) + if (((card->txbd_wrptr & reg->tx_mask) == + (card->txbd_rdptr & reg->tx_mask)) && + ((card->txbd_wrptr & reg->tx_rollover_ind) != + (card->txbd_rdptr & reg->tx_rollover_ind))) card->txbd_flush = 0; else mwifiex_clean_pcie_ring_buf(adapter); @@ -883,6 +899,7 @@ mwifiex_pcie_send_data(struct mwifiex_adapter *adapter, struct sk_buff *skb, struct mwifiex_tx_param *tx_param) { struct pcie_service_card *card = adapter->card; + const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; u32 wrindx; int ret; dma_addr_t buf_pa; @@ -913,7 +930,7 @@ mwifiex_pcie_send_data(struct mwifiex_adapter *adapter, struct sk_buff *skb, PCI_DMA_TODEVICE)) return -1; - wrindx = card->txbd_wrptr & MWIFIEX_TXBD_MASK; + wrindx = card->txbd_wrptr & reg->tx_mask; MWIFIEX_SKB_PACB(skb, &buf_pa); card->tx_buf_list[wrindx] = skb; card->txbd_ring[wrindx]->paddr = buf_pa; @@ -921,17 +938,17 @@ mwifiex_pcie_send_data(struct mwifiex_adapter *adapter, struct sk_buff *skb, card->txbd_ring[wrindx]->flags = MWIFIEX_BD_FLAG_FIRST_DESC | MWIFIEX_BD_FLAG_LAST_DESC; - if ((++card->txbd_wrptr & MWIFIEX_TXBD_MASK) == + if ((++card->txbd_wrptr & reg->tx_mask) == MWIFIEX_MAX_TXRX_BD) card->txbd_wrptr = ((card->txbd_wrptr & - MWIFIEX_BD_FLAG_ROLLOVER_IND) ^ - MWIFIEX_BD_FLAG_ROLLOVER_IND); + reg->tx_rollover_ind) ^ + reg->tx_rollover_ind); - /* Write the TX ring write pointer in to REG_TXBD_WRPTR */ - if (mwifiex_write_reg(adapter, REG_TXBD_WRPTR, + /* Write the TX ring write pointer in to reg->tx_wrptr */ + if (mwifiex_write_reg(adapter, reg->tx_wrptr, card->txbd_wrptr)) { dev_err(adapter->dev, - "SEND DATA: failed to write REG_TXBD_WRPTR\n"); + "SEND DATA: failed to write reg->tx_wrptr\n"); ret = -1; goto done_unmap; } @@ -984,6 +1001,7 @@ done_unmap: static int mwifiex_pcie_process_recv_data(struct mwifiex_adapter *adapter) { struct pcie_service_card *card = adapter->card; + const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; u32 wrptr, rd_index; dma_addr_t buf_pa; int ret = 0; @@ -993,23 +1011,23 @@ static int mwifiex_pcie_process_recv_data(struct mwifiex_adapter *adapter) mwifiex_pm_wakeup_card(adapter); /* Read the RX ring Write pointer set by firmware */ - if (mwifiex_read_reg(adapter, REG_RXBD_WRPTR, &wrptr)) { + if (mwifiex_read_reg(adapter, reg->rx_wrptr, &wrptr)) { dev_err(adapter->dev, - "RECV DATA: failed to read REG_TXBD_RDPTR\n"); + "RECV DATA: failed to read reg->rx_wrptr\n"); ret = -1; goto done; } card->rxbd_wrptr = wrptr; - while (((wrptr & MWIFIEX_RXBD_MASK) != - (card->rxbd_rdptr & MWIFIEX_RXBD_MASK)) || - ((wrptr & MWIFIEX_BD_FLAG_ROLLOVER_IND) == - (card->rxbd_rdptr & MWIFIEX_BD_FLAG_ROLLOVER_IND))) { + while (((wrptr & reg->rx_mask) != + (card->rxbd_rdptr & reg->rx_mask)) || + ((wrptr & reg->rx_rollover_ind) == + (card->rxbd_rdptr & reg->rx_rollover_ind))) { struct sk_buff *skb_data; u16 rx_len; __le16 pkt_len; - rd_index = card->rxbd_rdptr & MWIFIEX_RXBD_MASK; + rd_index = card->rxbd_rdptr & reg->rx_mask; skb_data = card->rx_buf_list[rd_index]; MWIFIEX_SKB_PACB(skb_data, &buf_pa); @@ -1051,28 +1069,28 @@ static int mwifiex_pcie_process_recv_data(struct mwifiex_adapter *adapter) card->rxbd_ring[rd_index]->len = skb_tmp->len; card->rxbd_ring[rd_index]->flags = 0; - if ((++card->rxbd_rdptr & MWIFIEX_RXBD_MASK) == + if ((++card->rxbd_rdptr & reg->rx_mask) == MWIFIEX_MAX_TXRX_BD) { card->rxbd_rdptr = ((card->rxbd_rdptr & - MWIFIEX_BD_FLAG_ROLLOVER_IND) ^ - MWIFIEX_BD_FLAG_ROLLOVER_IND); + reg->rx_rollover_ind) ^ + reg->rx_rollover_ind); } dev_dbg(adapter->dev, "info: RECV DATA: \n", card->rxbd_rdptr, wrptr); - /* Write the RX ring read pointer in to REG_RXBD_RDPTR */ - if (mwifiex_write_reg(adapter, REG_RXBD_RDPTR, + /* Write the RX ring read pointer in to reg->rx_rdptr */ + if (mwifiex_write_reg(adapter, reg->rx_rdptr, card->rxbd_rdptr)) { dev_err(adapter->dev, - "RECV DATA: failed to write REG_RXBD_RDPTR\n"); + "RECV DATA: failed to write reg->rx_rdptr\n"); ret = -1; goto done; } /* Read the RX ring Write pointer set by firmware */ - if (mwifiex_read_reg(adapter, REG_RXBD_WRPTR, &wrptr)) { + if (mwifiex_read_reg(adapter, reg->rx_wrptr, &wrptr)) { dev_err(adapter->dev, - "RECV DATA: failed to read REG_TXBD_RDPTR\n"); + "RECV DATA: failed to read reg->rx_wrptr\n"); ret = -1; goto done; } @@ -1093,6 +1111,7 @@ mwifiex_pcie_send_boot_cmd(struct mwifiex_adapter *adapter, struct sk_buff *skb) { dma_addr_t buf_pa; struct pcie_service_card *card = adapter->card; + const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; if (!(skb->data && skb->len)) { dev_err(adapter->dev, @@ -1106,9 +1125,10 @@ mwifiex_pcie_send_boot_cmd(struct mwifiex_adapter *adapter, struct sk_buff *skb) MWIFIEX_SKB_PACB(skb, &buf_pa); - /* Write the lower 32bits of the physical address to scratch - * register 0 */ - if (mwifiex_write_reg(adapter, PCIE_SCRATCH_0_REG, (u32)buf_pa)) { + /* Write the lower 32bits of the physical address to low command + * address scratch register + */ + if (mwifiex_write_reg(adapter, reg->cmd_addr_lo, (u32)buf_pa)) { dev_err(adapter->dev, "%s: failed to write download command to boot code.\n", __func__); @@ -1117,9 +1137,10 @@ mwifiex_pcie_send_boot_cmd(struct mwifiex_adapter *adapter, struct sk_buff *skb) return -1; } - /* Write the upper 32bits of the physical address to scratch - * register 1 */ - if (mwifiex_write_reg(adapter, PCIE_SCRATCH_1_REG, + /* Write the upper 32bits of the physical address to high command + * address scratch register + */ + if (mwifiex_write_reg(adapter, reg->cmd_addr_hi, (u32)((u64)buf_pa >> 32))) { dev_err(adapter->dev, "%s: failed to write download command to boot code.\n", @@ -1129,10 +1150,10 @@ mwifiex_pcie_send_boot_cmd(struct mwifiex_adapter *adapter, struct sk_buff *skb) return -1; } - /* Write the command length to scratch register 2 */ - if (mwifiex_write_reg(adapter, PCIE_SCRATCH_2_REG, skb->len)) { + /* Write the command length to cmd_size scratch register */ + if (mwifiex_write_reg(adapter, reg->cmd_size, skb->len)) { dev_err(adapter->dev, - "%s: failed to write command len to scratch reg 2\n", + "%s: failed to write command len to cmd_size scratch reg\n", __func__); pci_unmap_single(card->dev, buf_pa, MWIFIEX_UPLD_SIZE, PCI_DMA_TODEVICE); @@ -1158,11 +1179,12 @@ mwifiex_pcie_send_boot_cmd(struct mwifiex_adapter *adapter, struct sk_buff *skb) static int mwifiex_pcie_init_fw_port(struct mwifiex_adapter *adapter) { struct pcie_service_card *card = adapter->card; + const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; - /* Write the RX ring read pointer in to REG_RXBD_RDPTR */ - if (mwifiex_write_reg(adapter, REG_RXBD_RDPTR, card->rxbd_rdptr | 0)) { + /* Write the RX ring read pointer in to reg->rx_rdptr */ + if (mwifiex_write_reg(adapter, reg->rx_rdptr, card->rxbd_rdptr)) { dev_err(adapter->dev, - "RECV DATA: failed to write REG_RXBD_RDPTR\n"); + "RECV DATA: failed to write reg->rx_rdptr\n"); return -1; } return 0; @@ -1174,6 +1196,7 @@ static int mwifiex_pcie_send_cmd(struct mwifiex_adapter *adapter, struct sk_buff *skb) { struct pcie_service_card *card = adapter->card; + const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; int ret = 0; dma_addr_t cmd_buf_pa, cmdrsp_buf_pa; u8 *payload = (u8 *)skb->data; @@ -1206,7 +1229,7 @@ mwifiex_pcie_send_cmd(struct mwifiex_adapter *adapter, struct sk_buff *skb) /* To send a command, the driver will: 1. Write the 64bit physical address of the data buffer to - SCRATCH1 + SCRATCH0 + cmd response address low + cmd response address high 2. Ring the door bell (i.e. set the door bell interrupt) In response to door bell interrupt, the firmware will perform @@ -1218,7 +1241,7 @@ mwifiex_pcie_send_cmd(struct mwifiex_adapter *adapter, struct sk_buff *skb) MWIFIEX_SKB_PACB(card->cmdrsp_buf, &cmdrsp_buf_pa); /* Write the lower 32bits of the cmdrsp buffer physical address */ - if (mwifiex_write_reg(adapter, REG_CMDRSP_ADDR_LO, + if (mwifiex_write_reg(adapter, reg->cmdrsp_addr_lo, (u32)cmdrsp_buf_pa)) { dev_err(adapter->dev, "Failed to write download cmd to boot code.\n"); @@ -1227,7 +1250,7 @@ mwifiex_pcie_send_cmd(struct mwifiex_adapter *adapter, struct sk_buff *skb) } /* Write the upper 32bits of the cmdrsp buffer physical address */ - if (mwifiex_write_reg(adapter, REG_CMDRSP_ADDR_HI, + if (mwifiex_write_reg(adapter, reg->cmdrsp_addr_hi, (u32)((u64)cmdrsp_buf_pa >> 32))) { dev_err(adapter->dev, "Failed to write download cmd to boot code.\n"); @@ -1237,15 +1260,16 @@ mwifiex_pcie_send_cmd(struct mwifiex_adapter *adapter, struct sk_buff *skb) } MWIFIEX_SKB_PACB(card->cmd_buf, &cmd_buf_pa); - /* Write the lower 32bits of the physical address to REG_CMD_ADDR_LO */ - if (mwifiex_write_reg(adapter, REG_CMD_ADDR_LO, (u32)cmd_buf_pa)) { + /* Write the lower 32bits of the physical address to reg->cmd_addr_lo */ + if (mwifiex_write_reg(adapter, reg->cmd_addr_lo, + (u32)cmd_buf_pa)) { dev_err(adapter->dev, "Failed to write download cmd to boot code.\n"); ret = -1; goto done; } - /* Write the upper 32bits of the physical address to REG_CMD_ADDR_HI */ - if (mwifiex_write_reg(adapter, REG_CMD_ADDR_HI, + /* Write the upper 32bits of the physical address to reg->cmd_addr_hi */ + if (mwifiex_write_reg(adapter, reg->cmd_addr_hi, (u32)((u64)cmd_buf_pa >> 32))) { dev_err(adapter->dev, "Failed to write download cmd to boot code.\n"); @@ -1253,10 +1277,11 @@ mwifiex_pcie_send_cmd(struct mwifiex_adapter *adapter, struct sk_buff *skb) goto done; } - /* Write the command length to REG_CMD_SIZE */ - if (mwifiex_write_reg(adapter, REG_CMD_SIZE, card->cmd_buf->len)) { + /* Write the command length to reg->cmd_size */ + if (mwifiex_write_reg(adapter, reg->cmd_size, + card->cmd_buf->len)) { dev_err(adapter->dev, - "Failed to write cmd len to REG_CMD_SIZE\n"); + "Failed to write cmd len to reg->cmd_size\n"); ret = -1; goto done; } @@ -1283,6 +1308,7 @@ done: static int mwifiex_pcie_process_cmd_complete(struct mwifiex_adapter *adapter) { struct pcie_service_card *card = adapter->card; + const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; struct sk_buff *skb = card->cmdrsp_buf; int count = 0; u16 rx_len; @@ -1328,14 +1354,14 @@ static int mwifiex_pcie_process_cmd_complete(struct mwifiex_adapter *adapter) /* Clear the cmd-rsp buffer address in scratch registers. This will prevent firmware from writing to the same response buffer again. */ - if (mwifiex_write_reg(adapter, REG_CMDRSP_ADDR_LO, 0)) { + if (mwifiex_write_reg(adapter, reg->cmdrsp_addr_lo, 0)) { dev_err(adapter->dev, "cmd_done: failed to clear cmd_rsp_addr_lo\n"); return -1; } /* Write the upper 32bits of the cmdrsp buffer physical address */ - if (mwifiex_write_reg(adapter, REG_CMDRSP_ADDR_HI, 0)) { + if (mwifiex_write_reg(adapter, reg->cmdrsp_addr_hi, 0)) { dev_err(adapter->dev, "cmd_done: failed to clear cmd_rsp_addr_hi\n"); return -1; @@ -1380,6 +1406,7 @@ static int mwifiex_pcie_cmdrsp_complete(struct mwifiex_adapter *adapter, static int mwifiex_pcie_process_event_ready(struct mwifiex_adapter *adapter) { struct pcie_service_card *card = adapter->card; + const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; u32 rdptr = card->evtbd_rdptr & MWIFIEX_EVTBD_MASK; u32 wrptr, event; dma_addr_t buf_pa; @@ -1399,9 +1426,9 @@ static int mwifiex_pcie_process_event_ready(struct mwifiex_adapter *adapter) } /* Read the event ring write pointer set by firmware */ - if (mwifiex_read_reg(adapter, REG_EVTBD_WRPTR, &wrptr)) { + if (mwifiex_read_reg(adapter, reg->evt_wrptr, &wrptr)) { dev_err(adapter->dev, - "EventReady: failed to read REG_EVTBD_WRPTR\n"); + "EventReady: failed to read reg->evt_wrptr\n"); return -1; } @@ -1409,8 +1436,8 @@ static int mwifiex_pcie_process_event_ready(struct mwifiex_adapter *adapter) card->evtbd_rdptr, wrptr); if (((wrptr & MWIFIEX_EVTBD_MASK) != (card->evtbd_rdptr & MWIFIEX_EVTBD_MASK)) || - ((wrptr & MWIFIEX_BD_FLAG_ROLLOVER_IND) == - (card->evtbd_rdptr & MWIFIEX_BD_FLAG_ROLLOVER_IND))) { + ((wrptr & reg->evt_rollover_ind) == + (card->evtbd_rdptr & reg->evt_rollover_ind))) { struct sk_buff *skb_cmd; __le16 data_len = 0; u16 evt_len; @@ -1462,6 +1489,7 @@ static int mwifiex_pcie_event_complete(struct mwifiex_adapter *adapter, struct sk_buff *skb) { struct pcie_service_card *card = adapter->card; + const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; int ret = 0; u32 rdptr = card->evtbd_rdptr & MWIFIEX_EVTBD_MASK; u32 wrptr; @@ -1477,9 +1505,9 @@ static int mwifiex_pcie_event_complete(struct mwifiex_adapter *adapter, } /* Read the event ring write pointer set by firmware */ - if (mwifiex_read_reg(adapter, REG_EVTBD_WRPTR, &wrptr)) { + if (mwifiex_read_reg(adapter, reg->evt_wrptr, &wrptr)) { dev_err(adapter->dev, - "event_complete: failed to read REG_EVTBD_WRPTR\n"); + "event_complete: failed to read reg->evt_wrptr\n"); return -1; } @@ -1504,17 +1532,18 @@ static int mwifiex_pcie_event_complete(struct mwifiex_adapter *adapter, if ((++card->evtbd_rdptr & MWIFIEX_EVTBD_MASK) == MWIFIEX_MAX_EVT_BD) { card->evtbd_rdptr = ((card->evtbd_rdptr & - MWIFIEX_BD_FLAG_ROLLOVER_IND) ^ - MWIFIEX_BD_FLAG_ROLLOVER_IND); + reg->evt_rollover_ind) ^ + reg->evt_rollover_ind); } dev_dbg(adapter->dev, "info: Updated ", card->evtbd_rdptr, wrptr); - /* Write the event ring read pointer in to REG_EVTBD_RDPTR */ - if (mwifiex_write_reg(adapter, REG_EVTBD_RDPTR, card->evtbd_rdptr)) { + /* Write the event ring read pointer in to reg->evt_rdptr */ + if (mwifiex_write_reg(adapter, reg->evt_rdptr, + card->evtbd_rdptr)) { dev_err(adapter->dev, - "event_complete: failed to read REG_EVTBD_RDPTR\n"); + "event_complete: failed to read reg->evt_rdptr\n"); return -1; } @@ -1543,6 +1572,7 @@ static int mwifiex_prog_fw_w_helper(struct mwifiex_adapter *adapter, u32 block_retry_cnt = 0; dma_addr_t buf_pa; struct pcie_service_card *card = adapter->card; + const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; if (!firmware || !firmware_len) { dev_err(adapter->dev, @@ -1574,7 +1604,7 @@ static int mwifiex_prog_fw_w_helper(struct mwifiex_adapter *adapter, break; for (tries = 0; tries < MAX_POLL_TRIES; tries++) { - ret = mwifiex_read_reg(adapter, PCIE_SCRATCH_2_REG, + ret = mwifiex_read_reg(adapter, reg->cmd_size, &len); if (ret) { dev_warn(adapter->dev, @@ -1620,16 +1650,15 @@ static int mwifiex_prog_fw_w_helper(struct mwifiex_adapter *adapter, dev_dbg(adapter->dev, "."); - tx_blocks = (txlen + - MWIFIEX_PCIE_BLOCK_SIZE_FW_DNLD - 1) / - MWIFIEX_PCIE_BLOCK_SIZE_FW_DNLD; + tx_blocks = (txlen + card->pcie.blksz_fw_dl - 1) / + card->pcie.blksz_fw_dl; /* Copy payload to buffer */ memmove(skb->data, &firmware[offset], txlen); } skb_put(skb, MWIFIEX_UPLD_SIZE - skb->len); - skb_trim(skb, tx_blocks * MWIFIEX_PCIE_BLOCK_SIZE_FW_DNLD); + skb_trim(skb, tx_blocks * card->pcie.blksz_fw_dl); /* Send the boot command to device */ if (mwifiex_pcie_send_boot_cmd(adapter, skb)) { @@ -1682,6 +1711,8 @@ mwifiex_check_fw_status(struct mwifiex_adapter *adapter, u32 poll_num) { int ret = 0; u32 firmware_stat, winner_status; + struct pcie_service_card *card = adapter->card; + const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; u32 tries; /* Mask spurios interrupts */ @@ -1692,7 +1723,8 @@ mwifiex_check_fw_status(struct mwifiex_adapter *adapter, u32 poll_num) } dev_dbg(adapter->dev, "Setting driver ready signature\n"); - if (mwifiex_write_reg(adapter, REG_DRV_READY, FIRMWARE_READY_PCIE)) { + if (mwifiex_write_reg(adapter, reg->drv_rdy, + FIRMWARE_READY_PCIE)) { dev_err(adapter->dev, "Failed to write driver ready signature\n"); return -1; @@ -1700,7 +1732,7 @@ mwifiex_check_fw_status(struct mwifiex_adapter *adapter, u32 poll_num) /* Wait for firmware initialization event */ for (tries = 0; tries < poll_num; tries++) { - if (mwifiex_read_reg(adapter, PCIE_SCRATCH_3_REG, + if (mwifiex_read_reg(adapter, reg->fw_status, &firmware_stat)) ret = -1; else @@ -1717,7 +1749,7 @@ mwifiex_check_fw_status(struct mwifiex_adapter *adapter, u32 poll_num) } if (ret) { - if (mwifiex_read_reg(adapter, PCIE_SCRATCH_3_REG, + if (mwifiex_read_reg(adapter, reg->fw_status, &winner_status)) ret = -1; else if (!winner_status) { @@ -2061,10 +2093,11 @@ static void mwifiex_pcie_cleanup(struct mwifiex_adapter *adapter) { struct pcie_service_card *card = adapter->card; struct pci_dev *pdev = card->dev; + const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; if (user_rmmod) { dev_dbg(adapter->dev, "Clearing driver ready signature\n"); - if (mwifiex_write_reg(adapter, REG_DRV_READY, 0x00000000)) + if (mwifiex_write_reg(adapter, reg->drv_rdy, 0x00000000)) dev_err(adapter->dev, "Failed to write driver not-ready signature\n"); } @@ -2102,7 +2135,7 @@ static int mwifiex_register_dev(struct mwifiex_adapter *adapter) } adapter->dev = &pdev->dev; - strcpy(adapter->fw_name, PCIE8766_DEFAULT_FW_NAME); + strcpy(adapter->fw_name, card->pcie.firmware); return 0; } diff --git a/drivers/net/wireless/mwifiex/pcie.h b/drivers/net/wireless/mwifiex/pcie.h index 37eeb2ca6b29..7ef660ec058e 100644 --- a/drivers/net/wireless/mwifiex/pcie.h +++ b/drivers/net/wireless/mwifiex/pcie.h @@ -75,27 +75,6 @@ #define MWIFIEX_BD_FLAG_ROLLOVER_IND BIT(7) #define MWIFIEX_BD_FLAG_FIRST_DESC BIT(0) #define MWIFIEX_BD_FLAG_LAST_DESC BIT(1) -#define REG_CMD_ADDR_LO PCIE_SCRATCH_0_REG -#define REG_CMD_ADDR_HI PCIE_SCRATCH_1_REG -#define REG_CMD_SIZE PCIE_SCRATCH_2_REG - -#define REG_CMDRSP_ADDR_LO PCIE_SCRATCH_4_REG -#define REG_CMDRSP_ADDR_HI PCIE_SCRATCH_5_REG - -/* TX buffer description read pointer */ -#define REG_TXBD_RDPTR PCIE_SCRATCH_6_REG -/* TX buffer description write pointer */ -#define REG_TXBD_WRPTR PCIE_SCRATCH_7_REG -/* RX buffer description read pointer */ -#define REG_RXBD_RDPTR PCIE_SCRATCH_8_REG -/* RX buffer description write pointer */ -#define REG_RXBD_WRPTR PCIE_SCRATCH_9_REG -/* Event buffer description read pointer */ -#define REG_EVTBD_RDPTR PCIE_SCRATCH_10_REG -/* Event buffer description write pointer */ -#define REG_EVTBD_WRPTR PCIE_SCRATCH_11_REG -/* Driver ready signature write pointer */ -#define REG_DRV_READY PCIE_SCRATCH_12_REG /* Max retry number of command write */ #define MAX_WRITE_IOMEM_RETRY 2 @@ -104,6 +83,78 @@ /* FW awake cookie after FW ready */ #define FW_AWAKE_COOKIE (0xAA55AA55) +struct mwifiex_pcie_card_reg { + u16 cmd_addr_lo; + u16 cmd_addr_hi; + u16 fw_status; + u16 cmd_size; + u16 cmdrsp_addr_lo; + u16 cmdrsp_addr_hi; + u16 tx_rdptr; + u16 tx_wrptr; + u16 rx_rdptr; + u16 rx_wrptr; + u16 evt_rdptr; + u16 evt_wrptr; + u16 drv_rdy; + u16 tx_start_ptr; + u32 tx_mask; + u32 tx_wrap_mask; + u32 rx_mask; + u32 rx_wrap_mask; + u32 tx_rollover_ind; + u32 rx_rollover_ind; + u32 evt_rollover_ind; + u8 ring_flag_sop; + u8 ring_flag_eop; + u8 ring_flag_xs_sop; + u8 ring_flag_xs_eop; + u32 ring_tx_start_ptr; + u8 pfu_enabled; +}; + +static const struct mwifiex_pcie_card_reg mwifiex_reg_8766 = { + .cmd_addr_lo = PCIE_SCRATCH_0_REG, + .cmd_addr_hi = PCIE_SCRATCH_1_REG, + .cmd_size = PCIE_SCRATCH_2_REG, + .fw_status = PCIE_SCRATCH_3_REG, + .cmdrsp_addr_lo = PCIE_SCRATCH_4_REG, + .cmdrsp_addr_hi = PCIE_SCRATCH_5_REG, + .tx_rdptr = PCIE_SCRATCH_6_REG, + .tx_wrptr = PCIE_SCRATCH_7_REG, + .rx_rdptr = PCIE_SCRATCH_8_REG, + .rx_wrptr = PCIE_SCRATCH_9_REG, + .evt_rdptr = PCIE_SCRATCH_10_REG, + .evt_wrptr = PCIE_SCRATCH_11_REG, + .drv_rdy = PCIE_SCRATCH_12_REG, + .tx_start_ptr = 0, + .tx_mask = MWIFIEX_TXBD_MASK, + .tx_wrap_mask = 0, + .rx_mask = MWIFIEX_RXBD_MASK, + .rx_wrap_mask = 0, + .tx_rollover_ind = MWIFIEX_BD_FLAG_ROLLOVER_IND, + .rx_rollover_ind = MWIFIEX_BD_FLAG_ROLLOVER_IND, + .evt_rollover_ind = MWIFIEX_BD_FLAG_ROLLOVER_IND, + .ring_flag_sop = 0, + .ring_flag_eop = 0, + .ring_flag_xs_sop = 0, + .ring_flag_xs_eop = 0, + .ring_tx_start_ptr = 0, + .pfu_enabled = 0, +}; + +struct mwifiex_pcie_device { + const char *firmware; + const struct mwifiex_pcie_card_reg *reg; + u16 blksz_fw_dl; +}; + +static const struct mwifiex_pcie_device mwifiex_pcie8766 = { + .firmware = PCIE8766_DEFAULT_FW_NAME, + .reg = &mwifiex_reg_8766, + .blksz_fw_dl = MWIFIEX_PCIE_BLOCK_SIZE_FW_DNLD, +}; + struct mwifiex_pcie_buf_desc { u64 paddr; u16 len; @@ -113,6 +164,7 @@ struct mwifiex_pcie_buf_desc { struct pcie_service_card { struct pci_dev *dev; struct mwifiex_adapter *adapter; + struct mwifiex_pcie_device pcie; u8 txbd_flush; u32 txbd_wrptr; @@ -150,10 +202,11 @@ struct pcie_service_card { static inline int mwifiex_pcie_txbd_empty(struct pcie_service_card *card, u32 rdptr) { - if (((card->txbd_wrptr & MWIFIEX_TXBD_MASK) == - (rdptr & MWIFIEX_TXBD_MASK)) && - ((card->txbd_wrptr & MWIFIEX_BD_FLAG_ROLLOVER_IND) != - (rdptr & MWIFIEX_BD_FLAG_ROLLOVER_IND))) + const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; + + if (((card->txbd_wrptr & reg->tx_mask) == (rdptr & reg->tx_mask)) && + ((card->txbd_wrptr & reg->tx_rollover_ind) != + (rdptr & reg->tx_rollover_ind))) return 1; return 0; @@ -162,10 +215,12 @@ mwifiex_pcie_txbd_empty(struct pcie_service_card *card, u32 rdptr) static inline int mwifiex_pcie_txbd_not_full(struct pcie_service_card *card) { - if (((card->txbd_wrptr & MWIFIEX_TXBD_MASK) != - (card->txbd_rdptr & MWIFIEX_TXBD_MASK)) || - ((card->txbd_wrptr & MWIFIEX_BD_FLAG_ROLLOVER_IND) != - (card->txbd_rdptr & MWIFIEX_BD_FLAG_ROLLOVER_IND))) + const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; + + if (((card->txbd_wrptr & reg->tx_mask) != + (card->txbd_rdptr & reg->tx_mask)) || + ((card->txbd_wrptr & reg->tx_rollover_ind) != + (card->txbd_rdptr & reg->tx_rollover_ind))) return 1; return 0; From 0732484b47b57ef90bb08408d60fddbad0262d82 Mon Sep 17 00:00:00 2001 From: Avinash Patil Date: Fri, 8 Feb 2013 18:18:07 -0800 Subject: [PATCH 139/209] mwifiex: separate ring initialization and ring creation routines This patch separates PCIe ring initialization from ring creation routines. This modularizes ring creation(TXBD, RXBD and event rings) functions. Readability has been improved while moving the code around. Signed-off-by: Avinash Patil Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/pcie.c | 327 +++++++++++++++++----------- 1 file changed, 194 insertions(+), 133 deletions(-) diff --git a/drivers/net/wireless/mwifiex/pcie.c b/drivers/net/wireless/mwifiex/pcie.c index 29c539b9424b..06aae55485e5 100644 --- a/drivers/net/wireless/mwifiex/pcie.c +++ b/drivers/net/wireless/mwifiex/pcie.c @@ -372,13 +372,199 @@ static int mwifiex_pcie_enable_host_int(struct mwifiex_adapter *adapter) } /* - * This function creates buffer descriptor ring for TX + * This function initializes TX buffer ring descriptors + */ +static int mwifiex_init_txq_ring(struct mwifiex_adapter *adapter) +{ + struct pcie_service_card *card = adapter->card; + struct mwifiex_pcie_buf_desc *desc; + int i; + + for (i = 0; i < MWIFIEX_MAX_TXRX_BD; i++) { + card->tx_buf_list[i] = NULL; + card->txbd_ring[i] = (void *)(card->txbd_ring_vbase + + (sizeof(*desc) * i)); + desc = card->txbd_ring[i]; + memset(desc, 0, sizeof(*desc)); + } + + return 0; +} + +/* This function initializes RX buffer ring descriptors. Each SKB is allocated + * here and after mapping PCI memory, its physical address is assigned to + * PCIE Rx buffer descriptor's physical address. + */ +static int mwifiex_init_rxq_ring(struct mwifiex_adapter *adapter) +{ + struct pcie_service_card *card = adapter->card; + struct sk_buff *skb; + struct mwifiex_pcie_buf_desc *desc; + dma_addr_t buf_pa; + int i; + + for (i = 0; i < MWIFIEX_MAX_TXRX_BD; i++) { + /* Allocate skb here so that firmware can DMA data from it */ + skb = dev_alloc_skb(MWIFIEX_RX_DATA_BUF_SIZE); + if (!skb) { + dev_err(adapter->dev, + "Unable to allocate skb for RX ring.\n"); + kfree(card->rxbd_ring_vbase); + return -ENOMEM; + } + + if (mwifiex_map_pci_memory(adapter, skb, + MWIFIEX_RX_DATA_BUF_SIZE, + PCI_DMA_FROMDEVICE)) + return -1; + + MWIFIEX_SKB_PACB(skb, &buf_pa); + + dev_dbg(adapter->dev, + "info: RX ring: skb=%p len=%d data=%p buf_pa=%#x:%x\n", + skb, skb->len, skb->data, (u32)buf_pa, + (u32)((u64)buf_pa >> 32)); + + card->rx_buf_list[i] = skb; + card->rxbd_ring[i] = (void *)(card->rxbd_ring_vbase + + (sizeof(*desc) * i)); + desc = card->rxbd_ring[i]; + desc->paddr = buf_pa; + desc->len = (u16)skb->len; + desc->flags = 0; + } + + return 0; +} + +/* This function initializes event buffer ring descriptors. Each SKB is + * allocated here and after mapping PCI memory, its physical address is assigned + * to PCIE Rx buffer descriptor's physical address + */ +static int mwifiex_pcie_init_evt_ring(struct mwifiex_adapter *adapter) +{ + struct pcie_service_card *card = adapter->card; + struct mwifiex_pcie_buf_desc *desc; + struct sk_buff *skb; + dma_addr_t buf_pa; + int i; + + for (i = 0; i < MWIFIEX_MAX_EVT_BD; i++) { + /* Allocate skb here so that firmware can DMA data from it */ + skb = dev_alloc_skb(MAX_EVENT_SIZE); + if (!skb) { + dev_err(adapter->dev, + "Unable to allocate skb for EVENT buf.\n"); + kfree(card->evtbd_ring_vbase); + return -ENOMEM; + } + skb_put(skb, MAX_EVENT_SIZE); + + if (mwifiex_map_pci_memory(adapter, skb, MAX_EVENT_SIZE, + PCI_DMA_FROMDEVICE)) + return -1; + + MWIFIEX_SKB_PACB(skb, &buf_pa); + + dev_dbg(adapter->dev, + "info: EVT ring: skb=%p len=%d data=%p buf_pa=%#x:%x\n", + skb, skb->len, skb->data, (u32)buf_pa, + (u32)((u64)buf_pa >> 32)); + + card->evt_buf_list[i] = skb; + card->evtbd_ring[i] = (void *)(card->evtbd_ring_vbase + + (sizeof(*desc) * i)); + + desc = card->evtbd_ring[i]; + desc->paddr = buf_pa; + desc->len = (u16)skb->len; + desc->flags = 0; + } + + return 0; +} + +/* This function cleans up TX buffer rings. If any of the buffer list has valid + * SKB address, associated SKB is freed. + */ +static void mwifiex_cleanup_txq_ring(struct mwifiex_adapter *adapter) +{ + struct pcie_service_card *card = adapter->card; + struct sk_buff *skb; + struct mwifiex_pcie_buf_desc *desc; + int i; + + for (i = 0; i < MWIFIEX_MAX_TXRX_BD; i++) { + desc = card->txbd_ring[i]; + if (card->tx_buf_list[i]) { + skb = card->tx_buf_list[i]; + pci_unmap_single(card->dev, desc->paddr, skb->len, + PCI_DMA_TODEVICE); + dev_kfree_skb_any(skb); + } + card->tx_buf_list[i] = NULL; + memset(desc, 0, sizeof(*desc)); + } + + return; +} + +/* This function cleans up RX buffer rings. If any of the buffer list has valid + * SKB address, associated SKB is freed. + */ +static void mwifiex_cleanup_rxq_ring(struct mwifiex_adapter *adapter) +{ + struct pcie_service_card *card = adapter->card; + struct mwifiex_pcie_buf_desc *desc; + struct sk_buff *skb; + int i; + + for (i = 0; i < MWIFIEX_MAX_TXRX_BD; i++) { + desc = card->rxbd_ring[i]; + if (card->rx_buf_list[i]) { + skb = card->rx_buf_list[i]; + pci_unmap_single(card->dev, desc->paddr, + MWIFIEX_RX_DATA_BUF_SIZE, + PCI_DMA_FROMDEVICE); + dev_kfree_skb_any(skb); + } + memset(desc, 0, sizeof(*desc)); + } + + return; +} + +/* This function cleans up event buffer rings. If any of the buffer list has + * valid SKB address, associated SKB is freed. + */ +static void mwifiex_cleanup_evt_ring(struct mwifiex_adapter *adapter) +{ + struct pcie_service_card *card = adapter->card; + struct mwifiex_pcie_buf_desc *desc; + struct sk_buff *skb; + int i; + + for (i = 0; i < MWIFIEX_MAX_EVT_BD; i++) { + desc = card->evtbd_ring[i]; + if (card->evt_buf_list[i]) { + skb = card->evt_buf_list[i]; + pci_unmap_single(card->dev, desc->paddr, MAX_EVENT_SIZE, + PCI_DMA_FROMDEVICE); + dev_kfree_skb_any(skb); + } + card->evt_buf_list[i] = NULL; + memset(desc, 0, sizeof(*desc)); + } + + return; +} + +/* This function creates buffer descriptor ring for TX */ static int mwifiex_pcie_create_txbd_ring(struct mwifiex_adapter *adapter) { struct pcie_service_card *card = adapter->card; const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; - int i; /* * driver maintaines the write pointer and firmware maintaines the read @@ -408,41 +594,15 @@ static int mwifiex_pcie_create_txbd_ring(struct mwifiex_adapter *adapter) card->txbd_ring_vbase, (unsigned int)card->txbd_ring_pbase, (u32)((u64)card->txbd_ring_pbase >> 32), card->txbd_ring_size); - for (i = 0; i < MWIFIEX_MAX_TXRX_BD; i++) { - card->txbd_ring[i] = (struct mwifiex_pcie_buf_desc *) - (card->txbd_ring_vbase + - (sizeof(struct mwifiex_pcie_buf_desc) - * i)); - - card->tx_buf_list[i] = NULL; - card->txbd_ring[i]->paddr = 0; - card->txbd_ring[i]->len = 0; - card->txbd_ring[i]->flags = 0; - } - - return 0; + return mwifiex_init_txq_ring(adapter); } static int mwifiex_pcie_delete_txbd_ring(struct mwifiex_adapter *adapter) { struct pcie_service_card *card = adapter->card; const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; - struct sk_buff *skb; - int i; - for (i = 0; i < MWIFIEX_MAX_TXRX_BD; i++) { - if (card->tx_buf_list[i]) { - skb = card->tx_buf_list[i]; - pci_unmap_single(card->dev, card->txbd_ring[i]->paddr, - skb->len, PCI_DMA_TODEVICE); - dev_kfree_skb_any(skb); - } - card->tx_buf_list[i] = NULL; - card->txbd_ring[i]->paddr = 0; - card->txbd_ring[i]->len = 0; - card->txbd_ring[i]->flags = 0; - card->txbd_ring[i] = NULL; - } + mwifiex_cleanup_txq_ring(adapter); if (card->txbd_ring_vbase) pci_free_consistent(card->dev, card->txbd_ring_size, @@ -464,9 +624,6 @@ static int mwifiex_pcie_create_rxbd_ring(struct mwifiex_adapter *adapter) { struct pcie_service_card *card = adapter->card; const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; - struct sk_buff *skb; - int i; - dma_addr_t buf_pa; /* * driver maintaines the read pointer and firmware maintaines the write @@ -496,39 +653,7 @@ static int mwifiex_pcie_create_rxbd_ring(struct mwifiex_adapter *adapter) (u32)((u64)card->rxbd_ring_pbase >> 32), card->rxbd_ring_size); - for (i = 0; i < MWIFIEX_MAX_TXRX_BD; i++) { - card->rxbd_ring[i] = (struct mwifiex_pcie_buf_desc *) - (card->rxbd_ring_vbase + - (sizeof(struct mwifiex_pcie_buf_desc) - * i)); - - /* Allocate skb here so that firmware can DMA data from it */ - skb = dev_alloc_skb(MWIFIEX_RX_DATA_BUF_SIZE); - if (!skb) { - dev_err(adapter->dev, - "Unable to allocate skb for RX ring.\n"); - kfree(card->rxbd_ring_vbase); - return -ENOMEM; - } - if (mwifiex_map_pci_memory(adapter, skb, - MWIFIEX_RX_DATA_BUF_SIZE, - PCI_DMA_FROMDEVICE)) - return -1; - - MWIFIEX_SKB_PACB(skb, &buf_pa); - - dev_dbg(adapter->dev, "info: RX ring: add new skb base: %p, " - "buf_base: %p, buf_pbase: %#x:%x, buf_len: %#x\n", - skb, skb->data, (u32)buf_pa, (u32)((u64)buf_pa >> 32), - skb->len); - - card->rx_buf_list[i] = skb; - card->rxbd_ring[i]->paddr = buf_pa; - card->rxbd_ring[i]->len = (u16)skb->len; - card->rxbd_ring[i]->flags = 0; - } - - return 0; + return mwifiex_init_rxq_ring(adapter); } /* @@ -538,23 +663,8 @@ static int mwifiex_pcie_delete_rxbd_ring(struct mwifiex_adapter *adapter) { struct pcie_service_card *card = adapter->card; const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; - struct sk_buff *skb; - int i; - for (i = 0; i < MWIFIEX_MAX_TXRX_BD; i++) { - if (card->rx_buf_list[i]) { - skb = card->rx_buf_list[i]; - pci_unmap_single(card->dev, card->rxbd_ring[i]->paddr , - MWIFIEX_RX_DATA_BUF_SIZE, - PCI_DMA_FROMDEVICE); - dev_kfree_skb_any(skb); - } - card->rx_buf_list[i] = NULL; - card->rxbd_ring[i]->paddr = 0; - card->rxbd_ring[i]->len = 0; - card->rxbd_ring[i]->flags = 0; - card->rxbd_ring[i] = NULL; - } + mwifiex_cleanup_rxq_ring(adapter); if (card->rxbd_ring_vbase) pci_free_consistent(card->dev, card->rxbd_ring_size, @@ -576,9 +686,6 @@ static int mwifiex_pcie_create_evtbd_ring(struct mwifiex_adapter *adapter) { struct pcie_service_card *card = adapter->card; const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; - struct sk_buff *skb; - int i; - dma_addr_t buf_pa; /* * driver maintaines the read pointer and firmware maintaines the write @@ -608,39 +715,7 @@ static int mwifiex_pcie_create_evtbd_ring(struct mwifiex_adapter *adapter) (u32)((u64)card->evtbd_ring_pbase >> 32), card->evtbd_ring_size); - for (i = 0; i < MWIFIEX_MAX_EVT_BD; i++) { - card->evtbd_ring[i] = (struct mwifiex_pcie_buf_desc *) - (card->evtbd_ring_vbase + - (sizeof(struct mwifiex_pcie_buf_desc) - * i)); - - /* Allocate skb here so that firmware can DMA data from it */ - skb = dev_alloc_skb(MAX_EVENT_SIZE); - if (!skb) { - dev_err(adapter->dev, - "Unable to allocate skb for EVENT buf.\n"); - kfree(card->evtbd_ring_vbase); - return -ENOMEM; - } - skb_put(skb, MAX_EVENT_SIZE); - - if (mwifiex_map_pci_memory(adapter, skb, MAX_EVENT_SIZE, - PCI_DMA_FROMDEVICE)) - return -1; - - MWIFIEX_SKB_PACB(skb, &buf_pa); - dev_dbg(adapter->dev, "info: Evt ring: add new skb. base: %p, " - "buf_base: %p, buf_pbase: %#x:%x, buf_len: %#x\n", - skb, skb->data, (u32)buf_pa, (u32)((u64)buf_pa >> 32), - skb->len); - - card->evt_buf_list[i] = skb; - card->evtbd_ring[i]->paddr = buf_pa; - card->evtbd_ring[i]->len = (u16)skb->len; - card->evtbd_ring[i]->flags = 0; - } - - return 0; + return mwifiex_pcie_init_evt_ring(adapter); } /* @@ -650,22 +725,8 @@ static int mwifiex_pcie_delete_evtbd_ring(struct mwifiex_adapter *adapter) { struct pcie_service_card *card = adapter->card; const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; - struct sk_buff *skb; - int i; - for (i = 0; i < MWIFIEX_MAX_EVT_BD; i++) { - if (card->evt_buf_list[i]) { - skb = card->evt_buf_list[i]; - pci_unmap_single(card->dev, card->evtbd_ring[i]->paddr, - MAX_EVENT_SIZE, PCI_DMA_FROMDEVICE); - dev_kfree_skb_any(skb); - } - card->evt_buf_list[i] = NULL; - card->evtbd_ring[i]->paddr = 0; - card->evtbd_ring[i]->len = 0; - card->evtbd_ring[i]->flags = 0; - card->evtbd_ring[i] = NULL; - } + mwifiex_cleanup_evt_ring(adapter); if (card->evtbd_ring_vbase) pci_free_consistent(card->dev, card->evtbd_ring_size, From e05dc3e93c136ecd329ed2d57d4eb2e82f530304 Mon Sep 17 00:00:00 2001 From: Avinash Patil Date: Fri, 8 Feb 2013 18:18:08 -0800 Subject: [PATCH 140/209] mwifiex: define generic data type for PCIe ring buffers This patch defines PCIe ring buffer array pointer as void instead of mwifiex_pcie_buf_desc. This will enable us to use same pointers for ring operations instead of new structures if buffer descriptor structure changes. Also split out event buffer descriptor structure from struct mwifiex_pcie_buf_desc. For PCIe8766 TX/RX buffer descriptor is same as evevt buffer descriptor. Newer chips could use different TX/RX buffer descriptor while event descriptor remains the same. Signed-off-by: Avinash Patil Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/pcie.c | 49 +++++++++++++++-------------- drivers/net/wireless/mwifiex/pcie.h | 12 +++++-- 2 files changed, 35 insertions(+), 26 deletions(-) diff --git a/drivers/net/wireless/mwifiex/pcie.c b/drivers/net/wireless/mwifiex/pcie.c index 06aae55485e5..6c15969efd55 100644 --- a/drivers/net/wireless/mwifiex/pcie.c +++ b/drivers/net/wireless/mwifiex/pcie.c @@ -444,7 +444,7 @@ static int mwifiex_init_rxq_ring(struct mwifiex_adapter *adapter) static int mwifiex_pcie_init_evt_ring(struct mwifiex_adapter *adapter) { struct pcie_service_card *card = adapter->card; - struct mwifiex_pcie_buf_desc *desc; + struct mwifiex_evt_buf_desc *desc; struct sk_buff *skb; dma_addr_t buf_pa; int i; @@ -474,7 +474,6 @@ static int mwifiex_pcie_init_evt_ring(struct mwifiex_adapter *adapter) card->evt_buf_list[i] = skb; card->evtbd_ring[i] = (void *)(card->evtbd_ring_vbase + (sizeof(*desc) * i)); - desc = card->evtbd_ring[i]; desc->paddr = buf_pa; desc->len = (u16)skb->len; @@ -540,7 +539,7 @@ static void mwifiex_cleanup_rxq_ring(struct mwifiex_adapter *adapter) static void mwifiex_cleanup_evt_ring(struct mwifiex_adapter *adapter) { struct pcie_service_card *card = adapter->card; - struct mwifiex_pcie_buf_desc *desc; + struct mwifiex_evt_buf_desc *desc; struct sk_buff *skb; int i; @@ -695,7 +694,7 @@ static int mwifiex_pcie_create_evtbd_ring(struct mwifiex_adapter *adapter) card->evtbd_wrptr = 0; card->evtbd_rdptr = reg->evt_rollover_ind; - card->evtbd_ring_size = sizeof(struct mwifiex_pcie_buf_desc) * + card->evtbd_ring_size = sizeof(struct mwifiex_evt_buf_desc) * MWIFIEX_MAX_EVT_BD; dev_dbg(adapter->dev, "info: evtbd_ring: Allocating %d bytes\n", card->evtbd_ring_size); @@ -880,6 +879,7 @@ static int mwifiex_pcie_send_data_complete(struct mwifiex_adapter *adapter) struct sk_buff *skb; dma_addr_t buf_pa; u32 wrdoneidx, rdptr, unmap_count = 0; + struct mwifiex_pcie_buf_desc *desc; struct pcie_service_card *card = adapter->card; const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; @@ -922,9 +922,8 @@ static int mwifiex_pcie_send_data_complete(struct mwifiex_adapter *adapter) } card->tx_buf_list[wrdoneidx] = NULL; - card->txbd_ring[wrdoneidx]->paddr = 0; - card->txbd_ring[wrdoneidx]->len = 0; - card->txbd_ring[wrdoneidx]->flags = 0; + desc = card->txbd_ring[wrdoneidx]; + memset(desc, 0, sizeof(*desc)); card->txbd_rdptr++; if ((card->txbd_rdptr & reg->tx_mask) == num_tx_buffs) @@ -964,6 +963,7 @@ mwifiex_pcie_send_data(struct mwifiex_adapter *adapter, struct sk_buff *skb, u32 wrindx; int ret; dma_addr_t buf_pa; + struct mwifiex_pcie_buf_desc *desc; __le16 *tmp; if (!(skb->data && skb->len)) { @@ -994,10 +994,11 @@ mwifiex_pcie_send_data(struct mwifiex_adapter *adapter, struct sk_buff *skb, wrindx = card->txbd_wrptr & reg->tx_mask; MWIFIEX_SKB_PACB(skb, &buf_pa); card->tx_buf_list[wrindx] = skb; - card->txbd_ring[wrindx]->paddr = buf_pa; - card->txbd_ring[wrindx]->len = (u16)skb->len; - card->txbd_ring[wrindx]->flags = MWIFIEX_BD_FLAG_FIRST_DESC | - MWIFIEX_BD_FLAG_LAST_DESC; + desc = card->txbd_ring[wrindx]; + desc->paddr = buf_pa; + desc->len = (u16)skb->len; + desc->flags = MWIFIEX_BD_FLAG_FIRST_DESC | + MWIFIEX_BD_FLAG_LAST_DESC; if ((++card->txbd_wrptr & reg->tx_mask) == MWIFIEX_MAX_TXRX_BD) @@ -1049,9 +1050,7 @@ done_unmap: MWIFIEX_SKB_PACB(skb, &buf_pa); pci_unmap_single(card->dev, buf_pa, skb->len, PCI_DMA_TODEVICE); card->tx_buf_list[wrindx] = NULL; - card->txbd_ring[wrindx]->paddr = 0; - card->txbd_ring[wrindx]->len = 0; - card->txbd_ring[wrindx]->flags = 0; + memset(desc, 0, sizeof(*desc)); return ret; } @@ -1067,6 +1066,7 @@ static int mwifiex_pcie_process_recv_data(struct mwifiex_adapter *adapter) dma_addr_t buf_pa; int ret = 0; struct sk_buff *skb_tmp = NULL; + struct mwifiex_pcie_buf_desc *desc; if (!mwifiex_pcie_ok_to_access_hw(adapter)) mwifiex_pm_wakeup_card(adapter); @@ -1126,9 +1126,10 @@ static int mwifiex_pcie_process_recv_data(struct mwifiex_adapter *adapter) "RECV DATA: Attach new sk_buff %p at rxbd_rdidx=%d\n", skb_tmp, rd_index); card->rx_buf_list[rd_index] = skb_tmp; - card->rxbd_ring[rd_index]->paddr = buf_pa; - card->rxbd_ring[rd_index]->len = skb_tmp->len; - card->rxbd_ring[rd_index]->flags = 0; + desc = card->rxbd_ring[rd_index]; + desc->paddr = buf_pa; + desc->len = skb_tmp->len; + desc->flags = 0; if ((++card->rxbd_rdptr & reg->rx_mask) == MWIFIEX_MAX_TXRX_BD) { @@ -1471,6 +1472,7 @@ static int mwifiex_pcie_process_event_ready(struct mwifiex_adapter *adapter) u32 rdptr = card->evtbd_rdptr & MWIFIEX_EVTBD_MASK; u32 wrptr, event; dma_addr_t buf_pa; + struct mwifiex_evt_buf_desc *desc; if (!mwifiex_pcie_ok_to_access_hw(adapter)) mwifiex_pm_wakeup_card(adapter); @@ -1512,9 +1514,8 @@ static int mwifiex_pcie_process_event_ready(struct mwifiex_adapter *adapter) /* Take the pointer and set it to event pointer in adapter and will return back after event handling callback */ card->evt_buf_list[rdptr] = NULL; - card->evtbd_ring[rdptr]->paddr = 0; - card->evtbd_ring[rdptr]->len = 0; - card->evtbd_ring[rdptr]->flags = 0; + desc = card->evtbd_ring[rdptr]; + memset(desc, 0, sizeof(*desc)); event = *(u32 *) &skb_cmd->data[INTF_HEADER_LEN]; adapter->event_cause = event; @@ -1555,6 +1556,7 @@ static int mwifiex_pcie_event_complete(struct mwifiex_adapter *adapter, u32 rdptr = card->evtbd_rdptr & MWIFIEX_EVTBD_MASK; u32 wrptr; dma_addr_t buf_pa; + struct mwifiex_evt_buf_desc *desc; if (!skb) return 0; @@ -1581,9 +1583,10 @@ static int mwifiex_pcie_event_complete(struct mwifiex_adapter *adapter, MWIFIEX_SKB_PACB(skb, &buf_pa); card->evt_buf_list[rdptr] = skb; MWIFIEX_SKB_PACB(skb, &buf_pa); - card->evtbd_ring[rdptr]->paddr = buf_pa; - card->evtbd_ring[rdptr]->len = (u16)skb->len; - card->evtbd_ring[rdptr]->flags = 0; + desc = card->evtbd_ring[rdptr]; + desc->paddr = buf_pa; + desc->len = (u16)skb->len; + desc->flags = 0; skb = NULL; } else { dev_dbg(adapter->dev, diff --git a/drivers/net/wireless/mwifiex/pcie.h b/drivers/net/wireless/mwifiex/pcie.h index 7ef660ec058e..7ebdc74f2bbf 100644 --- a/drivers/net/wireless/mwifiex/pcie.h +++ b/drivers/net/wireless/mwifiex/pcie.h @@ -155,6 +155,12 @@ static const struct mwifiex_pcie_device mwifiex_pcie8766 = { .blksz_fw_dl = MWIFIEX_PCIE_BLOCK_SIZE_FW_DNLD, }; +struct mwifiex_evt_buf_desc { + u64 paddr; + u16 len; + u16 flags; +} __packed; + struct mwifiex_pcie_buf_desc { u64 paddr; u16 len; @@ -172,7 +178,7 @@ struct pcie_service_card { u32 txbd_ring_size; u8 *txbd_ring_vbase; dma_addr_t txbd_ring_pbase; - struct mwifiex_pcie_buf_desc *txbd_ring[MWIFIEX_MAX_TXRX_BD]; + void *txbd_ring[MWIFIEX_MAX_TXRX_BD]; struct sk_buff *tx_buf_list[MWIFIEX_MAX_TXRX_BD]; u32 rxbd_wrptr; @@ -180,7 +186,7 @@ struct pcie_service_card { u32 rxbd_ring_size; u8 *rxbd_ring_vbase; dma_addr_t rxbd_ring_pbase; - struct mwifiex_pcie_buf_desc *rxbd_ring[MWIFIEX_MAX_TXRX_BD]; + void *rxbd_ring[MWIFIEX_MAX_TXRX_BD]; struct sk_buff *rx_buf_list[MWIFIEX_MAX_TXRX_BD]; u32 evtbd_wrptr; @@ -188,7 +194,7 @@ struct pcie_service_card { u32 evtbd_ring_size; u8 *evtbd_ring_vbase; dma_addr_t evtbd_ring_pbase; - struct mwifiex_pcie_buf_desc *evtbd_ring[MWIFIEX_MAX_EVT_BD]; + void *evtbd_ring[MWIFIEX_MAX_EVT_BD]; struct sk_buff *evt_buf_list[MWIFIEX_MAX_EVT_BD]; struct sk_buff *cmd_buf; From ca8f21127883f8c1ea48b9ce8f93ead2175142a7 Mon Sep 17 00:00:00 2001 From: Avinash Patil Date: Fri, 8 Feb 2013 18:18:09 -0800 Subject: [PATCH 141/209] mwifiex: add PCIe8897 support This patch adds PCIe8897 support to mwifiex. In PCIe8897 PFU (pre-fetch unit) is enabled by default. This patch adds support to accommodate this feaure as well. Signed-off-by: Avinash Patil Signed-off-by: Yogesh Ashok Powar Signed-off-by: Nishant Sarmukadam Signed-off-by: Bing Zhao Signed-off-by: Frank Huang Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/Kconfig | 4 +- drivers/net/wireless/mwifiex/pcie.c | 242 ++++++++++++++++++++------- drivers/net/wireless/mwifiex/pcie.h | 99 ++++++++++- 3 files changed, 275 insertions(+), 70 deletions(-) diff --git a/drivers/net/wireless/mwifiex/Kconfig b/drivers/net/wireless/mwifiex/Kconfig index b2e27723f801..4f614aad9ded 100644 --- a/drivers/net/wireless/mwifiex/Kconfig +++ b/drivers/net/wireless/mwifiex/Kconfig @@ -20,12 +20,12 @@ config MWIFIEX_SDIO mwifiex_sdio. config MWIFIEX_PCIE - tristate "Marvell WiFi-Ex Driver for PCIE 8766" + tristate "Marvell WiFi-Ex Driver for PCIE 8766/8897" depends on MWIFIEX && PCI select FW_LOADER ---help--- This adds support for wireless adapters based on Marvell - 8766 chipset with PCIe interface. + 8766/8897 chipsets with PCIe interface. If you choose to build it as a module, it will be called mwifiex_pcie. diff --git a/drivers/net/wireless/mwifiex/pcie.c b/drivers/net/wireless/mwifiex/pcie.c index 6c15969efd55..3b9be7c185cb 100644 --- a/drivers/net/wireless/mwifiex/pcie.c +++ b/drivers/net/wireless/mwifiex/pcie.c @@ -237,15 +237,17 @@ static int mwifiex_pcie_resume(struct pci_dev *pdev) return 0; } -#define PCIE_VENDOR_ID_MARVELL (0x11ab) -#define PCIE_DEVICE_ID_MARVELL_88W8766P (0x2b30) - static DEFINE_PCI_DEVICE_TABLE(mwifiex_ids) = { { PCIE_VENDOR_ID_MARVELL, PCIE_DEVICE_ID_MARVELL_88W8766P, PCI_ANY_ID, PCI_ANY_ID, 0, 0, .driver_data = (unsigned long) &mwifiex_pcie8766, }, + { + PCIE_VENDOR_ID_MARVELL, PCIE_DEVICE_ID_MARVELL_88W8897, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + .driver_data = (unsigned long) &mwifiex_pcie8897, + }, {}, }; @@ -377,15 +379,24 @@ static int mwifiex_pcie_enable_host_int(struct mwifiex_adapter *adapter) static int mwifiex_init_txq_ring(struct mwifiex_adapter *adapter) { struct pcie_service_card *card = adapter->card; + const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; struct mwifiex_pcie_buf_desc *desc; + struct mwifiex_pfu_buf_desc *desc2; int i; for (i = 0; i < MWIFIEX_MAX_TXRX_BD; i++) { card->tx_buf_list[i] = NULL; - card->txbd_ring[i] = (void *)(card->txbd_ring_vbase + - (sizeof(*desc) * i)); - desc = card->txbd_ring[i]; - memset(desc, 0, sizeof(*desc)); + if (reg->pfu_enabled) { + card->txbd_ring[i] = (void *)card->txbd_ring_vbase + + (sizeof(*desc2) * i); + desc2 = card->txbd_ring[i]; + memset(desc2, 0, sizeof(*desc2)); + } else { + card->txbd_ring[i] = (void *)card->txbd_ring_vbase + + (sizeof(*desc) * i); + desc = card->txbd_ring[i]; + memset(desc, 0, sizeof(*desc)); + } } return 0; @@ -398,8 +409,10 @@ static int mwifiex_init_txq_ring(struct mwifiex_adapter *adapter) static int mwifiex_init_rxq_ring(struct mwifiex_adapter *adapter) { struct pcie_service_card *card = adapter->card; + const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; struct sk_buff *skb; struct mwifiex_pcie_buf_desc *desc; + struct mwifiex_pfu_buf_desc *desc2; dma_addr_t buf_pa; int i; @@ -426,12 +439,23 @@ static int mwifiex_init_rxq_ring(struct mwifiex_adapter *adapter) (u32)((u64)buf_pa >> 32)); card->rx_buf_list[i] = skb; - card->rxbd_ring[i] = (void *)(card->rxbd_ring_vbase + - (sizeof(*desc) * i)); - desc = card->rxbd_ring[i]; - desc->paddr = buf_pa; - desc->len = (u16)skb->len; - desc->flags = 0; + if (reg->pfu_enabled) { + card->rxbd_ring[i] = (void *)card->rxbd_ring_vbase + + (sizeof(*desc2) * i); + desc2 = card->rxbd_ring[i]; + desc2->paddr = buf_pa; + desc2->len = (u16)skb->len; + desc2->frag_len = (u16)skb->len; + desc2->flags = reg->ring_flag_eop | reg->ring_flag_sop; + desc2->offset = 0; + } else { + card->rxbd_ring[i] = (void *)(card->rxbd_ring_vbase + + (sizeof(*desc) * i)); + desc = card->rxbd_ring[i]; + desc->paddr = buf_pa; + desc->len = (u16)skb->len; + desc->flags = 0; + } } return 0; @@ -489,20 +513,33 @@ static int mwifiex_pcie_init_evt_ring(struct mwifiex_adapter *adapter) static void mwifiex_cleanup_txq_ring(struct mwifiex_adapter *adapter) { struct pcie_service_card *card = adapter->card; + const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; struct sk_buff *skb; struct mwifiex_pcie_buf_desc *desc; + struct mwifiex_pfu_buf_desc *desc2; int i; for (i = 0; i < MWIFIEX_MAX_TXRX_BD; i++) { - desc = card->txbd_ring[i]; - if (card->tx_buf_list[i]) { - skb = card->tx_buf_list[i]; - pci_unmap_single(card->dev, desc->paddr, skb->len, - PCI_DMA_TODEVICE); - dev_kfree_skb_any(skb); + if (reg->pfu_enabled) { + desc2 = card->txbd_ring[i]; + if (card->tx_buf_list[i]) { + skb = card->tx_buf_list[i]; + pci_unmap_single(card->dev, desc2->paddr, + skb->len, PCI_DMA_TODEVICE); + dev_kfree_skb_any(skb); + } + memset(desc2, 0, sizeof(*desc2)); + } else { + desc = card->txbd_ring[i]; + if (card->tx_buf_list[i]) { + skb = card->tx_buf_list[i]; + pci_unmap_single(card->dev, desc->paddr, + skb->len, PCI_DMA_TODEVICE); + dev_kfree_skb_any(skb); + } + memset(desc, 0, sizeof(*desc)); } card->tx_buf_list[i] = NULL; - memset(desc, 0, sizeof(*desc)); } return; @@ -514,20 +551,33 @@ static void mwifiex_cleanup_txq_ring(struct mwifiex_adapter *adapter) static void mwifiex_cleanup_rxq_ring(struct mwifiex_adapter *adapter) { struct pcie_service_card *card = adapter->card; + const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; struct mwifiex_pcie_buf_desc *desc; + struct mwifiex_pfu_buf_desc *desc2; struct sk_buff *skb; int i; for (i = 0; i < MWIFIEX_MAX_TXRX_BD; i++) { - desc = card->rxbd_ring[i]; - if (card->rx_buf_list[i]) { - skb = card->rx_buf_list[i]; - pci_unmap_single(card->dev, desc->paddr, - MWIFIEX_RX_DATA_BUF_SIZE, - PCI_DMA_FROMDEVICE); - dev_kfree_skb_any(skb); + if (reg->pfu_enabled) { + desc2 = card->rxbd_ring[i]; + if (card->rx_buf_list[i]) { + skb = card->rx_buf_list[i]; + pci_unmap_single(card->dev, desc2->paddr, + skb->len, PCI_DMA_TODEVICE); + dev_kfree_skb_any(skb); + } + memset(desc2, 0, sizeof(*desc2)); + } else { + desc = card->rxbd_ring[i]; + if (card->rx_buf_list[i]) { + skb = card->rx_buf_list[i]; + pci_unmap_single(card->dev, desc->paddr, + skb->len, PCI_DMA_TODEVICE); + dev_kfree_skb_any(skb); + } + memset(desc, 0, sizeof(*desc)); } - memset(desc, 0, sizeof(*desc)); + card->rx_buf_list[i] = NULL; } return; @@ -571,12 +621,21 @@ static int mwifiex_pcie_create_txbd_ring(struct mwifiex_adapter *adapter) * starts at zero with rollover bit set */ card->txbd_wrptr = 0; - card->txbd_rdptr |= reg->tx_rollover_ind; + + if (reg->pfu_enabled) + card->txbd_rdptr = 0; + else + card->txbd_rdptr |= reg->tx_rollover_ind; /* allocate shared memory for the BD ring and divide the same in to several descriptors */ - card->txbd_ring_size = sizeof(struct mwifiex_pcie_buf_desc) * - MWIFIEX_MAX_TXRX_BD; + if (reg->pfu_enabled) + card->txbd_ring_size = sizeof(struct mwifiex_pfu_buf_desc) * + MWIFIEX_MAX_TXRX_BD; + else + card->txbd_ring_size = sizeof(struct mwifiex_pcie_buf_desc) * + MWIFIEX_MAX_TXRX_BD; + dev_dbg(adapter->dev, "info: txbd_ring: Allocating %d bytes\n", card->txbd_ring_size); card->txbd_ring_vbase = pci_alloc_consistent(card->dev, @@ -632,8 +691,13 @@ static int mwifiex_pcie_create_rxbd_ring(struct mwifiex_adapter *adapter) card->rxbd_wrptr = 0; card->rxbd_rdptr = reg->rx_rollover_ind; - card->rxbd_ring_size = sizeof(struct mwifiex_pcie_buf_desc) * - MWIFIEX_MAX_TXRX_BD; + if (reg->pfu_enabled) + card->rxbd_ring_size = sizeof(struct mwifiex_pfu_buf_desc) * + MWIFIEX_MAX_TXRX_BD; + else + card->rxbd_ring_size = sizeof(struct mwifiex_pcie_buf_desc) * + MWIFIEX_MAX_TXRX_BD; + dev_dbg(adapter->dev, "info: rxbd_ring: Allocating %d bytes\n", card->rxbd_ring_size); card->rxbd_ring_vbase = pci_alloc_consistent(card->dev, @@ -695,7 +759,8 @@ static int mwifiex_pcie_create_evtbd_ring(struct mwifiex_adapter *adapter) card->evtbd_rdptr = reg->evt_rollover_ind; card->evtbd_ring_size = sizeof(struct mwifiex_evt_buf_desc) * - MWIFIEX_MAX_EVT_BD; + MWIFIEX_MAX_EVT_BD; + dev_dbg(adapter->dev, "info: evtbd_ring: Allocating %d bytes\n", card->evtbd_ring_size); card->evtbd_ring_vbase = pci_alloc_consistent(card->dev, @@ -875,11 +940,11 @@ static int mwifiex_clean_pcie_ring_buf(struct mwifiex_adapter *adapter) */ static int mwifiex_pcie_send_data_complete(struct mwifiex_adapter *adapter) { - const u32 num_tx_buffs = MWIFIEX_MAX_TXRX_BD; struct sk_buff *skb; dma_addr_t buf_pa; - u32 wrdoneidx, rdptr, unmap_count = 0; + u32 wrdoneidx, rdptr, num_tx_buffs, unmap_count = 0; struct mwifiex_pcie_buf_desc *desc; + struct mwifiex_pfu_buf_desc *desc2; struct pcie_service_card *card = adapter->card; const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; @@ -896,12 +961,14 @@ static int mwifiex_pcie_send_data_complete(struct mwifiex_adapter *adapter) dev_dbg(adapter->dev, "SEND COMP: rdptr_prev=0x%x, rdptr=0x%x\n", card->txbd_rdptr, rdptr); + num_tx_buffs = MWIFIEX_MAX_TXRX_BD << reg->tx_start_ptr; /* free from previous txbd_rdptr to current txbd_rdptr */ while (((card->txbd_rdptr & reg->tx_mask) != (rdptr & reg->tx_mask)) || ((card->txbd_rdptr & reg->tx_rollover_ind) != (rdptr & reg->tx_rollover_ind))) { - wrdoneidx = card->txbd_rdptr & reg->tx_mask; + wrdoneidx = (card->txbd_rdptr & reg->tx_mask) >> + reg->tx_start_ptr; skb = card->tx_buf_list[wrdoneidx]; if (skb) { @@ -922,9 +989,23 @@ static int mwifiex_pcie_send_data_complete(struct mwifiex_adapter *adapter) } card->tx_buf_list[wrdoneidx] = NULL; - desc = card->txbd_ring[wrdoneidx]; - memset(desc, 0, sizeof(*desc)); - card->txbd_rdptr++; + + if (reg->pfu_enabled) { + desc2 = (void *)card->txbd_ring[wrdoneidx]; + memset(desc2, 0, sizeof(*desc2)); + } else { + desc = card->txbd_ring[wrdoneidx]; + memset(desc, 0, sizeof(*desc)); + } + switch (card->dev->device) { + case PCIE_DEVICE_ID_MARVELL_88W8766P: + card->txbd_rdptr++; + break; + case PCIE_DEVICE_ID_MARVELL_88W8897: + card->txbd_rdptr += reg->ring_tx_start_ptr; + break; + } + if ((card->txbd_rdptr & reg->tx_mask) == num_tx_buffs) card->txbd_rdptr = ((card->txbd_rdptr & @@ -960,10 +1041,11 @@ mwifiex_pcie_send_data(struct mwifiex_adapter *adapter, struct sk_buff *skb, { struct pcie_service_card *card = adapter->card; const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; - u32 wrindx; + u32 wrindx, num_tx_buffs, rx_val; int ret; dma_addr_t buf_pa; struct mwifiex_pcie_buf_desc *desc; + struct mwifiex_pfu_buf_desc *desc2; __le16 *tmp; if (!(skb->data && skb->len)) { @@ -975,6 +1057,7 @@ mwifiex_pcie_send_data(struct mwifiex_adapter *adapter, struct sk_buff *skb, if (!mwifiex_pcie_ok_to_access_hw(adapter)) mwifiex_pm_wakeup_card(adapter); + num_tx_buffs = MWIFIEX_MAX_TXRX_BD << reg->tx_start_ptr; dev_dbg(adapter->dev, "info: SEND DATA: \n", card->txbd_rdptr, card->txbd_wrptr); if (mwifiex_pcie_txbd_not_full(card)) { @@ -991,24 +1074,44 @@ mwifiex_pcie_send_data(struct mwifiex_adapter *adapter, struct sk_buff *skb, PCI_DMA_TODEVICE)) return -1; - wrindx = card->txbd_wrptr & reg->tx_mask; + wrindx = (card->txbd_wrptr & reg->tx_mask) >> reg->tx_start_ptr; MWIFIEX_SKB_PACB(skb, &buf_pa); card->tx_buf_list[wrindx] = skb; - desc = card->txbd_ring[wrindx]; - desc->paddr = buf_pa; - desc->len = (u16)skb->len; - desc->flags = MWIFIEX_BD_FLAG_FIRST_DESC | - MWIFIEX_BD_FLAG_LAST_DESC; - if ((++card->txbd_wrptr & reg->tx_mask) == - MWIFIEX_MAX_TXRX_BD) + if (reg->pfu_enabled) { + desc2 = (void *)card->txbd_ring[wrindx]; + desc2->paddr = buf_pa; + desc2->len = (u16)skb->len; + desc2->frag_len = (u16)skb->len; + desc2->offset = 0; + desc2->flags = MWIFIEX_BD_FLAG_FIRST_DESC | + MWIFIEX_BD_FLAG_LAST_DESC; + } else { + desc = card->txbd_ring[wrindx]; + desc->paddr = buf_pa; + desc->len = (u16)skb->len; + desc->flags = MWIFIEX_BD_FLAG_FIRST_DESC | + MWIFIEX_BD_FLAG_LAST_DESC; + } + + switch (card->dev->device) { + case PCIE_DEVICE_ID_MARVELL_88W8766P: + card->txbd_wrptr++; + break; + case PCIE_DEVICE_ID_MARVELL_88W8897: + card->txbd_wrptr += reg->ring_tx_start_ptr; + break; + } + + if ((card->txbd_wrptr & reg->tx_mask) == num_tx_buffs) card->txbd_wrptr = ((card->txbd_wrptr & reg->tx_rollover_ind) ^ reg->tx_rollover_ind); + rx_val = card->rxbd_rdptr & reg->rx_wrap_mask; /* Write the TX ring write pointer in to reg->tx_wrptr */ if (mwifiex_write_reg(adapter, reg->tx_wrptr, - card->txbd_wrptr)) { + card->txbd_wrptr | rx_val)) { dev_err(adapter->dev, "SEND DATA: failed to write reg->tx_wrptr\n"); ret = -1; @@ -1050,7 +1153,11 @@ done_unmap: MWIFIEX_SKB_PACB(skb, &buf_pa); pci_unmap_single(card->dev, buf_pa, skb->len, PCI_DMA_TODEVICE); card->tx_buf_list[wrindx] = NULL; - memset(desc, 0, sizeof(*desc)); + if (reg->pfu_enabled) + memset(desc2, 0, sizeof(*desc2)); + else + memset(desc, 0, sizeof(*desc)); + return ret; } @@ -1062,11 +1169,12 @@ static int mwifiex_pcie_process_recv_data(struct mwifiex_adapter *adapter) { struct pcie_service_card *card = adapter->card; const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; - u32 wrptr, rd_index; + u32 wrptr, rd_index, tx_val; dma_addr_t buf_pa; int ret = 0; struct sk_buff *skb_tmp = NULL; struct mwifiex_pcie_buf_desc *desc; + struct mwifiex_pfu_buf_desc *desc2; if (!mwifiex_pcie_ok_to_access_hw(adapter)) mwifiex_pm_wakeup_card(adapter); @@ -1126,10 +1234,20 @@ static int mwifiex_pcie_process_recv_data(struct mwifiex_adapter *adapter) "RECV DATA: Attach new sk_buff %p at rxbd_rdidx=%d\n", skb_tmp, rd_index); card->rx_buf_list[rd_index] = skb_tmp; - desc = card->rxbd_ring[rd_index]; - desc->paddr = buf_pa; - desc->len = skb_tmp->len; - desc->flags = 0; + + if (reg->pfu_enabled) { + desc2 = (void *)card->rxbd_ring[rd_index]; + desc2->paddr = buf_pa; + desc2->len = skb_tmp->len; + desc2->frag_len = skb_tmp->len; + desc2->offset = 0; + desc2->flags = reg->ring_flag_sop | reg->ring_flag_eop; + } else { + desc = card->rxbd_ring[rd_index]; + desc->paddr = buf_pa; + desc->len = skb_tmp->len; + desc->flags = 0; + } if ((++card->rxbd_rdptr & reg->rx_mask) == MWIFIEX_MAX_TXRX_BD) { @@ -1140,9 +1258,10 @@ static int mwifiex_pcie_process_recv_data(struct mwifiex_adapter *adapter) dev_dbg(adapter->dev, "info: RECV DATA: \n", card->rxbd_rdptr, wrptr); + tx_val = card->txbd_wrptr & reg->tx_wrap_mask; /* Write the RX ring read pointer in to reg->rx_rdptr */ if (mwifiex_write_reg(adapter, reg->rx_rdptr, - card->rxbd_rdptr)) { + card->rxbd_rdptr | tx_val)) { dev_err(adapter->dev, "RECV DATA: failed to write reg->rx_rdptr\n"); ret = -1; @@ -1242,9 +1361,11 @@ static int mwifiex_pcie_init_fw_port(struct mwifiex_adapter *adapter) { struct pcie_service_card *card = adapter->card; const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; + int tx_wrap = card->txbd_wrptr & reg->tx_wrap_mask; /* Write the RX ring read pointer in to reg->rx_rdptr */ - if (mwifiex_write_reg(adapter, reg->rx_rdptr, card->rxbd_rdptr)) { + if (mwifiex_write_reg(adapter, reg->rx_rdptr, card->rxbd_rdptr | + tx_wrap)) { dev_err(adapter->dev, "RECV DATA: failed to write reg->rx_rdptr\n"); return -1; @@ -2259,7 +2380,7 @@ static int mwifiex_pcie_init_module(void) { int ret; - pr_debug("Marvell 8766 PCIe Driver\n"); + pr_debug("Marvell PCIe Driver\n"); sema_init(&add_remove_card_sem, 1); @@ -2302,4 +2423,5 @@ MODULE_AUTHOR("Marvell International Ltd."); MODULE_DESCRIPTION("Marvell WiFi-Ex PCI-Express Driver version " PCIE_VERSION); MODULE_VERSION(PCIE_VERSION); MODULE_LICENSE("GPL v2"); -MODULE_FIRMWARE("mrvl/pcie8766_uapsta.bin"); +MODULE_FIRMWARE(PCIE8766_DEFAULT_FW_NAME); +MODULE_FIRMWARE(PCIE8897_DEFAULT_FW_NAME); diff --git a/drivers/net/wireless/mwifiex/pcie.h b/drivers/net/wireless/mwifiex/pcie.h index 7ebdc74f2bbf..608061578b37 100644 --- a/drivers/net/wireless/mwifiex/pcie.h +++ b/drivers/net/wireless/mwifiex/pcie.h @@ -29,6 +29,11 @@ #include "main.h" #define PCIE8766_DEFAULT_FW_NAME "mrvl/pcie8766_uapsta.bin" +#define PCIE8897_DEFAULT_FW_NAME "mrvl/pcie8897_uapsta.bin" + +#define PCIE_VENDOR_ID_MARVELL (0x11ab) +#define PCIE_DEVICE_ID_MARVELL_88W8766P (0x2b30) +#define PCIE_DEVICE_ID_MARVELL_88W8897 (0x2b38) /* Constants for Buffer Descriptor (BD) rings */ #define MWIFIEX_MAX_TXRX_BD 0x20 @@ -57,6 +62,8 @@ #define PCIE_SCRATCH_10_REG 0xCE8 #define PCIE_SCRATCH_11_REG 0xCEC #define PCIE_SCRATCH_12_REG 0xCF0 +#define PCIE_RD_DATA_PTR_Q0_Q1 0xC08C +#define PCIE_WR_DATA_PTR_Q0_Q1 0xC05C #define CPU_INTR_DNLD_RDY BIT(0) #define CPU_INTR_DOOR_BELL BIT(1) @@ -75,6 +82,14 @@ #define MWIFIEX_BD_FLAG_ROLLOVER_IND BIT(7) #define MWIFIEX_BD_FLAG_FIRST_DESC BIT(0) #define MWIFIEX_BD_FLAG_LAST_DESC BIT(1) +#define MWIFIEX_BD_FLAG_SOP BIT(0) +#define MWIFIEX_BD_FLAG_EOP BIT(1) +#define MWIFIEX_BD_FLAG_XS_SOP BIT(2) +#define MWIFIEX_BD_FLAG_XS_EOP BIT(3) +#define MWIFIEX_BD_FLAG_EVT_ROLLOVER_IND BIT(7) +#define MWIFIEX_BD_FLAG_RX_ROLLOVER_IND BIT(10) +#define MWIFIEX_BD_FLAG_TX_START_PTR BIT(16) +#define MWIFIEX_BD_FLAG_TX_ROLLOVER_IND BIT(26) /* Max retry number of command write */ #define MAX_WRITE_IOMEM_RETRY 2 @@ -143,6 +158,36 @@ static const struct mwifiex_pcie_card_reg mwifiex_reg_8766 = { .pfu_enabled = 0, }; +static const struct mwifiex_pcie_card_reg mwifiex_reg_8897 = { + .cmd_addr_lo = PCIE_SCRATCH_0_REG, + .cmd_addr_hi = PCIE_SCRATCH_1_REG, + .cmd_size = PCIE_SCRATCH_2_REG, + .fw_status = PCIE_SCRATCH_3_REG, + .cmdrsp_addr_lo = PCIE_SCRATCH_4_REG, + .cmdrsp_addr_hi = PCIE_SCRATCH_5_REG, + .tx_rdptr = PCIE_RD_DATA_PTR_Q0_Q1, + .tx_wrptr = PCIE_WR_DATA_PTR_Q0_Q1, + .rx_rdptr = PCIE_WR_DATA_PTR_Q0_Q1, + .rx_wrptr = PCIE_RD_DATA_PTR_Q0_Q1, + .evt_rdptr = PCIE_SCRATCH_10_REG, + .evt_wrptr = PCIE_SCRATCH_11_REG, + .drv_rdy = PCIE_SCRATCH_12_REG, + .tx_start_ptr = 16, + .tx_mask = 0x03FF0000, + .tx_wrap_mask = 0x07FF0000, + .rx_mask = 0x000003FF, + .rx_wrap_mask = 0x000007FF, + .tx_rollover_ind = MWIFIEX_BD_FLAG_TX_ROLLOVER_IND, + .rx_rollover_ind = MWIFIEX_BD_FLAG_RX_ROLLOVER_IND, + .evt_rollover_ind = MWIFIEX_BD_FLAG_EVT_ROLLOVER_IND, + .ring_flag_sop = MWIFIEX_BD_FLAG_SOP, + .ring_flag_eop = MWIFIEX_BD_FLAG_EOP, + .ring_flag_xs_sop = MWIFIEX_BD_FLAG_XS_SOP, + .ring_flag_xs_eop = MWIFIEX_BD_FLAG_XS_EOP, + .ring_tx_start_ptr = MWIFIEX_BD_FLAG_TX_START_PTR, + .pfu_enabled = 1, +}; + struct mwifiex_pcie_device { const char *firmware; const struct mwifiex_pcie_card_reg *reg; @@ -155,6 +200,12 @@ static const struct mwifiex_pcie_device mwifiex_pcie8766 = { .blksz_fw_dl = MWIFIEX_PCIE_BLOCK_SIZE_FW_DNLD, }; +static const struct mwifiex_pcie_device mwifiex_pcie8897 = { + .firmware = PCIE8897_DEFAULT_FW_NAME, + .reg = &mwifiex_reg_8897, + .blksz_fw_dl = MWIFIEX_PCIE_BLOCK_SIZE_FW_DNLD, +}; + struct mwifiex_evt_buf_desc { u64 paddr; u16 len; @@ -167,6 +218,15 @@ struct mwifiex_pcie_buf_desc { u16 flags; } __packed; +struct mwifiex_pfu_buf_desc { + u16 flags; + u16 offset; + u16 frag_len; + u16 len; + u64 paddr; + u32 reserved; +} __packed; + struct pcie_service_card { struct pci_dev *dev; struct mwifiex_adapter *adapter; @@ -210,10 +270,22 @@ mwifiex_pcie_txbd_empty(struct pcie_service_card *card, u32 rdptr) { const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; - if (((card->txbd_wrptr & reg->tx_mask) == (rdptr & reg->tx_mask)) && - ((card->txbd_wrptr & reg->tx_rollover_ind) != + switch (card->dev->device) { + case PCIE_DEVICE_ID_MARVELL_88W8766P: + if (((card->txbd_wrptr & reg->tx_mask) == + (rdptr & reg->tx_mask)) && + ((card->txbd_wrptr & reg->tx_rollover_ind) != + (rdptr & reg->tx_rollover_ind))) + return 1; + break; + case PCIE_DEVICE_ID_MARVELL_88W8897: + if (((card->txbd_wrptr & reg->tx_mask) == + (rdptr & reg->tx_mask)) && + ((card->txbd_wrptr & reg->tx_rollover_ind) == (rdptr & reg->tx_rollover_ind))) - return 1; + return 1; + break; + } return 0; } @@ -223,11 +295,22 @@ mwifiex_pcie_txbd_not_full(struct pcie_service_card *card) { const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; - if (((card->txbd_wrptr & reg->tx_mask) != - (card->txbd_rdptr & reg->tx_mask)) || - ((card->txbd_wrptr & reg->tx_rollover_ind) != - (card->txbd_rdptr & reg->tx_rollover_ind))) - return 1; + switch (card->dev->device) { + case PCIE_DEVICE_ID_MARVELL_88W8766P: + if (((card->txbd_wrptr & reg->tx_mask) != + (card->txbd_rdptr & reg->tx_mask)) || + ((card->txbd_wrptr & reg->tx_rollover_ind) != + (card->txbd_rdptr & reg->tx_rollover_ind))) + return 1; + break; + case PCIE_DEVICE_ID_MARVELL_88W8897: + if (((card->txbd_wrptr & reg->tx_mask) != + (card->txbd_rdptr & reg->tx_mask)) || + ((card->txbd_wrptr & reg->tx_rollover_ind) == + (card->txbd_rdptr & reg->tx_rollover_ind))) + return 1; + break; + } return 0; } From d9d76a045f2883f2e6cf00a43cb79b2e5a8db323 Mon Sep 17 00:00:00 2001 From: Xose Vazquez Perez Date: Sat, 9 Feb 2013 04:14:35 +0100 Subject: [PATCH 142/209] wireless: rt2x00: rt2800usb add "unknown" devices 0x06f8, 0xe036 Hercules Wireless Dual Band 600 USB Key HWNUm-600 0x0b05, 0x17a7 ASUS USB-N10H 150Mbps 11n Wireless USB dongle 0x0df6, 0x0069 Sitecom Wireless Dualband Network Adapter 300N X5 WLA-5000 0x0df6, 0x006f Sitecom WiFi USB adapter N600 WLA-5100 0x13d3, 0x3340 AzureWave 802.11n USB Wireless LAN Card 0x13d3, 0x3399 AzureWave 802.11n USB Wireless LAN Card 0x13d3, 0x3400 AzureWave 802.11n USB Wireless LAN Card 0x13d3, 0x3401 AzureWave 802.11n USB Wireless LAN Card 0x1740, 0x0600 EnGenius Dual-Band Wireless Media Adapter 0x1740, 0x0602 EnGenius 802.11 a/b/g/n Wireless USB Adapter 0x177f, 0x0254 Sweex LW054 Wireless 54G Adapter USB 0xf201, 0x5370 TP-LINK 54Mbps Wireless USB Adapter no RF3053, and I believe no RT5572. Cc: Ivo van Doorn Cc: Gertjan van Wingerde Cc: Helmut Schaa Cc: John W. Linville Cc: users@rt2x00.serialmonkey.com Cc: linux-wireless@vger.kernel.org Signed-off-by: Xose Vazquez Perez Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2800usb.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index 8a57646925a8..098613ed93fb 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -1219,10 +1219,15 @@ static struct usb_device_id rt2800usb_device_table[] = { { USB_DEVICE(0x0b05, 0x1760) }, { USB_DEVICE(0x0b05, 0x1761) }, { USB_DEVICE(0x0b05, 0x1790) }, + { USB_DEVICE(0x0b05, 0x17a7) }, /* AzureWave */ { USB_DEVICE(0x13d3, 0x3262) }, { USB_DEVICE(0x13d3, 0x3284) }, { USB_DEVICE(0x13d3, 0x3322) }, + { USB_DEVICE(0x13d3, 0x3340) }, + { USB_DEVICE(0x13d3, 0x3399) }, + { USB_DEVICE(0x13d3, 0x3400) }, + { USB_DEVICE(0x13d3, 0x3401) }, /* Belkin */ { USB_DEVICE(0x050d, 0x1003) }, /* Buffalo */ @@ -1237,10 +1242,15 @@ static struct usb_device_id rt2800usb_device_table[] = { { USB_DEVICE(0x07d1, 0x3c0b) }, /* Encore */ { USB_DEVICE(0x203d, 0x14a1) }, + /* EnGenius */ + { USB_DEVICE(0x1740, 0x0600) }, + { USB_DEVICE(0x1740, 0x0602) }, /* Gemtek */ { USB_DEVICE(0x15a9, 0x0010) }, /* Gigabyte */ { USB_DEVICE(0x1044, 0x800c) }, + /* Hercules */ + { USB_DEVICE(0x06f8, 0xe036) }, /* Huawei */ { USB_DEVICE(0x148f, 0xf101) }, /* I-O DATA */ @@ -1267,11 +1277,17 @@ static struct usb_device_id rt2800usb_device_table[] = { { USB_DEVICE(0x0df6, 0x004a) }, { USB_DEVICE(0x0df6, 0x004d) }, { USB_DEVICE(0x0df6, 0x0053) }, + { USB_DEVICE(0x0df6, 0x0069) }, + { USB_DEVICE(0x0df6, 0x006f) }, /* SMC */ { USB_DEVICE(0x083a, 0xa512) }, { USB_DEVICE(0x083a, 0xc522) }, { USB_DEVICE(0x083a, 0xd522) }, { USB_DEVICE(0x083a, 0xf511) }, + /* Sweex */ + { USB_DEVICE(0x177f, 0x0254) }, + /* TP-LINK */ + { USB_DEVICE(0xf201, 0x5370) }, #endif { 0, } }; From f1045f5e1f4f7d94f4e3a9600e3a3c3eec2650ec Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Mon, 11 Feb 2013 10:21:18 +0200 Subject: [PATCH 143/209] wlcore: remove newly introduced alloc/OOM messages In commit 0d2e7a5c (wireless: Remove unnecessary alloc/OOM messages, alloc cleanups) OOM messages after alloc were removed from the wlcore modules. Commit afb43e6d (wlcore: remove if_ops from platform_data) reintroduced a couple of those. This patch removes them. Signed-off-by: Luciano Coelho Reviewed-by: Felipe Balbi Signed-off-by: John W. Linville --- drivers/net/wireless/ti/wlcore/sdio.c | 4 +--- drivers/net/wireless/ti/wlcore/spi.c | 4 +--- 2 files changed, 2 insertions(+), 6 deletions(-) diff --git a/drivers/net/wireless/ti/wlcore/sdio.c b/drivers/net/wireless/ti/wlcore/sdio.c index 198028df6f4b..29ef2492951f 100644 --- a/drivers/net/wireless/ti/wlcore/sdio.c +++ b/drivers/net/wireless/ti/wlcore/sdio.c @@ -229,10 +229,8 @@ static int wl1271_probe(struct sdio_func *func, return -ENODEV; pdev_data = kzalloc(sizeof(*pdev_data), GFP_KERNEL); - if (!pdev_data) { - dev_err(&func->dev, "can't allocate platdev_data\n"); + if (!pdev_data) goto out; - } pdev_data->if_ops = &sdio_ops; diff --git a/drivers/net/wireless/ti/wlcore/spi.c b/drivers/net/wireless/ti/wlcore/spi.c index 5ad2e100e59b..e26447832683 100644 --- a/drivers/net/wireless/ti/wlcore/spi.c +++ b/drivers/net/wireless/ti/wlcore/spi.c @@ -332,10 +332,8 @@ static int wl1271_probe(struct spi_device *spi) int ret = -ENOMEM; pdev_data = kzalloc(sizeof(*pdev_data), GFP_KERNEL); - if (!pdev_data) { - dev_err(&spi->dev, "can't allocate platdev_data\n"); + if (!pdev_data) goto out; - } pdev_data->pdata = spi->dev.platform_data; if (!pdev_data->pdata) { From 8457703f1e86aaf0f134402dd1e09e1f13e65222 Mon Sep 17 00:00:00 2001 From: Vladimir Kondratiev Date: Tue, 5 Feb 2013 11:44:48 +0200 Subject: [PATCH 144/209] ath6kl: provide 64-bit per-station byte counters Internally, 64-bit byte counters maintained for per-station statistics. Tell to the netlink that full 64-bit value provided Signed-off-by: Vladimir Kondratiev Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath6kl/cfg80211.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c index 4225cca0f198..259c43332fb8 100644 --- a/drivers/net/wireless/ath/ath6kl/cfg80211.c +++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c @@ -1778,14 +1778,14 @@ static int ath6kl_get_station(struct wiphy *wiphy, struct net_device *dev, if (vif->target_stats.rx_byte) { sinfo->rx_bytes = vif->target_stats.rx_byte; - sinfo->filled |= STATION_INFO_RX_BYTES; + sinfo->filled |= STATION_INFO_RX_BYTES64; sinfo->rx_packets = vif->target_stats.rx_pkt; sinfo->filled |= STATION_INFO_RX_PACKETS; } if (vif->target_stats.tx_byte) { sinfo->tx_bytes = vif->target_stats.tx_byte; - sinfo->filled |= STATION_INFO_TX_BYTES; + sinfo->filled |= STATION_INFO_TX_BYTES64; sinfo->tx_packets = vif->target_stats.tx_pkt; sinfo->filled |= STATION_INFO_TX_PACKETS; } From 7f4fe17bc2d4fd46598b03bc51281cfa7ef6abf5 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Mon, 11 Feb 2013 14:36:03 +0100 Subject: [PATCH 145/209] mac80211/minstrel_ht: show the number of retries for each rate in debugfs Signed-off-by: Felix Fietkau Signed-off-by: Johannes Berg --- net/mac80211/rc80211_minstrel_ht_debugfs.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/net/mac80211/rc80211_minstrel_ht_debugfs.c b/net/mac80211/rc80211_minstrel_ht_debugfs.c index e788f76a1dfe..f2b7d26370f0 100644 --- a/net/mac80211/rc80211_minstrel_ht_debugfs.c +++ b/net/mac80211/rc80211_minstrel_ht_debugfs.c @@ -38,8 +38,8 @@ minstrel_ht_stats_open(struct inode *inode, struct file *file) file->private_data = ms; p = ms->buf; - p += sprintf(p, "type rate throughput ewma prob this prob " - "this succ/attempt success attempts\n"); + p += sprintf(p, "type rate throughput ewma prob this prob " + "retry this succ/attempt success attempts\n"); for (i = 0; i < MINSTREL_MAX_STREAMS * MINSTREL_STREAM_GROUPS; i++) { char htmode = '2'; char gimode = 'L'; @@ -64,18 +64,19 @@ minstrel_ht_stats_open(struct inode *inode, struct file *file) *(p++) = (idx == mi->max_tp_rate) ? 'T' : ' '; *(p++) = (idx == mi->max_tp_rate2) ? 't' : ' '; *(p++) = (idx == mi->max_prob_rate) ? 'P' : ' '; - p += sprintf(p, "MCS%-2u", (minstrel_mcs_groups[i].streams - 1) * + p += sprintf(p, " MCS%-2u", (minstrel_mcs_groups[i].streams - 1) * MCS_GROUP_RATES + j); tp = mr->cur_tp / 10; prob = MINSTREL_TRUNC(mr->cur_prob * 1000); eprob = MINSTREL_TRUNC(mr->probability * 1000); - p += sprintf(p, " %6u.%1u %6u.%1u %6u.%1u " - "%3u(%3u) %8llu %8llu\n", + p += sprintf(p, " %6u.%1u %6u.%1u %6u.%1u " + "%3u %3u(%3u) %8llu %8llu\n", tp / 10, tp % 10, eprob / 10, eprob % 10, prob / 10, prob % 10, + mr->retry_count, mr->last_success, mr->last_attempts, (unsigned long long)mr->succ_hist, From df15a6c4fa7f77511663d7b5f9134f37ad2e8c92 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Mon, 11 Feb 2013 14:36:04 +0100 Subject: [PATCH 146/209] mac80211/minstrel_ht: remove the sampling bypass check for the lowest rate It's more of an unnecessary micro-optimization and it prevents switching from long-GI to short-GI in HT20/single-stream for the lowest rate Signed-off-by: Felix Fietkau Signed-off-by: Johannes Berg --- net/mac80211/rc80211_minstrel_ht.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/net/mac80211/rc80211_minstrel_ht.c b/net/mac80211/rc80211_minstrel_ht.c index 9f9c453bc45d..5bb316aff21a 100644 --- a/net/mac80211/rc80211_minstrel_ht.c +++ b/net/mac80211/rc80211_minstrel_ht.c @@ -231,10 +231,6 @@ minstrel_ht_update_stats(struct minstrel_priv *mp, struct minstrel_ht_sta *mi) if (!mr->cur_tp) continue; - /* ignore the lowest rate of each single-stream group */ - if (!i && minstrel_mcs_groups[group].streams == 1) - continue; - if ((mr->cur_tp > cur_prob_tp && mr->probability > MINSTREL_FRAC(3, 4)) || mr->probability > cur_prob) { mg->max_prob_rate = index; From 6c17b77b67587b9f9e3070fb89fe98cef3187131 Mon Sep 17 00:00:00 2001 From: Seth Forshee Date: Mon, 11 Feb 2013 11:21:07 -0600 Subject: [PATCH 147/209] mac80211: Fix tx queue handling during scans Scans currently work by stopping the netdev tx queues but leaving the mac80211 queues active. This stops the flow of incoming packets while still allowing mac80211 to transmit nullfunc and probe request frames to facilitate scanning. However, the driver may try to wake the mac80211 queues while in this state, which will also wake the netdev queues. To prevent this, add a new queue stop reason, IEEE80211_QUEUE_STOP_REASON_OFFCHANNEL, to be used when stopping the tx queues for off-channel operation. This prevents the netdev queues from waking when a driver wakes the mac80211 queues. This also stops all frames from being transmitted, even those meant to be sent off-channel. Add a new tx control flag, IEEE80211_TX_CTL_OFFCHAN_TX_OK, which allows frames to be transmitted when the queues are stopped only for the off-channel stop reason. Update all locations transmitting off-channel frames to use this flag. Signed-off-by: Seth Forshee Signed-off-by: Johannes Berg --- include/net/mac80211.h | 4 ++++ net/mac80211/cfg.c | 3 ++- net/mac80211/ieee80211_i.h | 1 + net/mac80211/mlme.c | 3 ++- net/mac80211/offchannel.c | 30 ++++++++++-------------------- net/mac80211/scan.c | 9 ++++++--- net/mac80211/tx.c | 15 +++++++++++++++ 7 files changed, 40 insertions(+), 25 deletions(-) diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 86ad2c341525..0eaa9092364b 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -399,6 +399,9 @@ struct ieee80211_bss_conf { * @IEEE80211_TX_CTL_RATE_CTRL_PROBE: internal to mac80211, can be * set by rate control algorithms to indicate probe rate, will * be cleared for fragmented frames (except on the last fragment) + * @IEEE80211_TX_INTFL_OFFCHAN_TX_OK: Internal to mac80211. Used to indicate + * that a frame can be transmitted while the queues are stopped for + * off-channel operation. * @IEEE80211_TX_INTFL_NEED_TXPROCESSING: completely internal to mac80211, * used to indicate that a pending frame requires TX processing before * it can be sent out. @@ -464,6 +467,7 @@ enum mac80211_tx_control_flags { IEEE80211_TX_STAT_AMPDU = BIT(10), IEEE80211_TX_STAT_AMPDU_NO_BACK = BIT(11), IEEE80211_TX_CTL_RATE_CTRL_PROBE = BIT(12), + IEEE80211_TX_INTFL_OFFCHAN_TX_OK = BIT(13), IEEE80211_TX_INTFL_NEED_TXPROCESSING = BIT(14), IEEE80211_TX_INTFL_RETRIED = BIT(15), IEEE80211_TX_INTFL_DONT_ENCRYPT = BIT(16), diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 8f6b593a921f..e3dec80cf617 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -2749,7 +2749,8 @@ static int ieee80211_mgmt_tx(struct wiphy *wiphy, struct wireless_dev *wdev, goto out_unlock; } - IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_TX_OFFCHAN; + IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_TX_OFFCHAN | + IEEE80211_TX_INTFL_OFFCHAN_TX_OK; if (local->hw.flags & IEEE80211_HW_QUEUE_CONTROL) IEEE80211_SKB_CB(skb)->hw_queue = local->hw.offchannel_tx_hw_queue; diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 5635dfc7da34..76cdcfcd614c 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -809,6 +809,7 @@ enum queue_stop_reason { IEEE80211_QUEUE_STOP_REASON_AGGREGATION, IEEE80211_QUEUE_STOP_REASON_SUSPEND, IEEE80211_QUEUE_STOP_REASON_SKB_ADD, + IEEE80211_QUEUE_STOP_REASON_OFFCHANNEL, }; #ifdef CONFIG_MAC80211_LEDS diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 76cacdb062c8..efb22763d56d 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -685,7 +685,8 @@ void ieee80211_send_nullfunc(struct ieee80211_local *local, if (powersave) nullfunc->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM); - IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT; + IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT | + IEEE80211_TX_INTFL_OFFCHAN_TX_OK; if (ifmgd->flags & (IEEE80211_STA_BEACON_POLL | IEEE80211_STA_CONNECTION_POLL)) IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_USE_MINRATE; diff --git a/net/mac80211/offchannel.c b/net/mac80211/offchannel.c index 82baf5b6ecf4..4c3ee3e8285c 100644 --- a/net/mac80211/offchannel.c +++ b/net/mac80211/offchannel.c @@ -113,6 +113,10 @@ void ieee80211_offchannel_stop_vifs(struct ieee80211_local *local) * notify the AP about us leaving the channel and stop all * STA interfaces. */ + + ieee80211_stop_queues_by_reason(&local->hw, + IEEE80211_QUEUE_STOP_REASON_OFFCHANNEL); + mutex_lock(&local->iflist_mtx); list_for_each_entry(sdata, &local->interfaces, list) { if (!ieee80211_sdata_running(sdata)) @@ -133,12 +137,9 @@ void ieee80211_offchannel_stop_vifs(struct ieee80211_local *local) sdata, BSS_CHANGED_BEACON_ENABLED); } - if (sdata->vif.type != NL80211_IFTYPE_MONITOR) { - netif_tx_stop_all_queues(sdata->dev); - if (sdata->vif.type == NL80211_IFTYPE_STATION && - sdata->u.mgd.associated) - ieee80211_offchannel_ps_enable(sdata); - } + if (sdata->vif.type == NL80211_IFTYPE_STATION && + sdata->u.mgd.associated) + ieee80211_offchannel_ps_enable(sdata); } mutex_unlock(&local->iflist_mtx); } @@ -166,20 +167,6 @@ void ieee80211_offchannel_return(struct ieee80211_local *local) sdata->u.mgd.associated) ieee80211_offchannel_ps_disable(sdata); - if (sdata->vif.type != NL80211_IFTYPE_MONITOR) { - /* - * This may wake up queues even though the driver - * currently has them stopped. This is not very - * likely, since the driver won't have gotten any - * (or hardly any) new packets while we weren't - * on the right channel, and even if it happens - * it will at most lead to queueing up one more - * packet per queue in mac80211 rather than on - * the interface qdisc. - */ - netif_tx_wake_all_queues(sdata->dev); - } - if (test_and_clear_bit(SDATA_STATE_OFFCHANNEL_BEACON_STOPPED, &sdata->state)) { sdata->vif.bss_conf.enable_beacon = true; @@ -188,6 +175,9 @@ void ieee80211_offchannel_return(struct ieee80211_local *local) } } mutex_unlock(&local->iflist_mtx); + + ieee80211_wake_queues_by_reason(&local->hw, + IEEE80211_QUEUE_STOP_REASON_OFFCHANNEL); } void ieee80211_handle_roc_started(struct ieee80211_roc_work *roc) diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index edd47d9acb99..d9e2df96f676 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -382,6 +382,11 @@ static void ieee80211_scan_state_send_probe(struct ieee80211_local *local, int i; struct ieee80211_sub_if_data *sdata; enum ieee80211_band band = local->hw.conf.channel->band; + u32 tx_flags; + + tx_flags = IEEE80211_TX_INTFL_OFFCHAN_TX_OK; + if (local->scan_req->no_cck) + tx_flags |= IEEE80211_TX_CTL_NO_CCK_RATE; sdata = rcu_dereference_protected(local->scan_sdata, lockdep_is_held(&local->mtx)); @@ -393,9 +398,7 @@ static void ieee80211_scan_state_send_probe(struct ieee80211_local *local, local->scan_req->ssids[i].ssid_len, local->scan_req->ie, local->scan_req->ie_len, local->scan_req->rates[band], false, - local->scan_req->no_cck ? - IEEE80211_TX_CTL_NO_CCK_RATE : 0, - local->hw.conf.channel, true); + tx_flags, local->hw.conf.channel, true); /* * After sending probe requests, wait for probe responses diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 2ef0e19b06bb..f476aa6a771d 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -1230,6 +1230,21 @@ static bool ieee80211_tx_frags(struct ieee80211_local *local, spin_lock_irqsave(&local->queue_stop_reason_lock, flags); if (local->queue_stop_reasons[q] || (!txpending && !skb_queue_empty(&local->pending[q]))) { + if (unlikely(info->flags & + IEEE80211_TX_INTFL_OFFCHAN_TX_OK && + local->queue_stop_reasons[q] & + ~BIT(IEEE80211_QUEUE_STOP_REASON_OFFCHANNEL))) { + /* + * Drop off-channel frames if queues are stopped + * for any reason other than off-channel + * operation. Never queue them. + */ + spin_unlock_irqrestore( + &local->queue_stop_reason_lock, flags); + ieee80211_purge_tx_queue(&local->hw, skbs); + return true; + } + /* * Since queue is stopped, queue up frames for later * transmission from the tx-pending tasklet when the From 9c35d7d2368f54313b988a01c408e5cf863ffd9e Mon Sep 17 00:00:00 2001 From: Seth Forshee Date: Mon, 11 Feb 2013 11:21:08 -0600 Subject: [PATCH 148/209] mac80211: Add flushes before going off-channel We've got a couple of races when enabling powersave with an AP for off-channel operation. The first is fairly simple. If we go off-channel before the nullfunc frame to enable PS is transmitted then it may not be received by the AP. Add a flush after enabling off-channel PS to prevent this from happening. The second race is a bit more subtle. If the driver supports QoS and has frames queued when the nullfunc frame is queued, those frames may get transmitted after the nullfunc frame. If PM is not set then the AP is being told that we've exited PS before we go off-channel and may try to deliver frames. To prevent this, add a flush after stopping the queues but before passing the nullfunc frame to the driver. Signed-off-by: Seth Forshee Signed-off-by: Johannes Berg --- net/mac80211/offchannel.c | 5 +++++ net/mac80211/scan.c | 3 +++ 2 files changed, 8 insertions(+) diff --git a/net/mac80211/offchannel.c b/net/mac80211/offchannel.c index 4c3ee3e8285c..cc79b4a2e821 100644 --- a/net/mac80211/offchannel.c +++ b/net/mac80211/offchannel.c @@ -114,8 +114,13 @@ void ieee80211_offchannel_stop_vifs(struct ieee80211_local *local) * STA interfaces. */ + /* + * Stop queues and transmit all frames queued by the driver + * before sending nullfunc to enable powersave at the AP. + */ ieee80211_stop_queues_by_reason(&local->hw, IEEE80211_QUEUE_STOP_REASON_OFFCHANNEL); + drv_flush(local, false); mutex_lock(&local->iflist_mtx); list_for_each_entry(sdata, &local->interfaces, list) { diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index d9e2df96f676..6d0b89e4aa31 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -334,6 +334,9 @@ static int ieee80211_start_sw_scan(struct ieee80211_local *local) ieee80211_offchannel_stop_vifs(local); + /* ensure nullfunc is transmitted before leaving operating channel */ + drv_flush(local, false); + ieee80211_configure_filter(local); /* We need to set power level at maximum rate for scanning. */ From b6a7bceb3b9315478657bc55884dfdcd104c9864 Mon Sep 17 00:00:00 2001 From: Amitkumar Karwar Date: Mon, 11 Feb 2013 23:56:40 -0800 Subject: [PATCH 149/209] nl80211: minor correction in sample wowlan mask calculation The match 00:xx:00:00:xx:00:00:00:00:xx:xx:xx (where xx indicates "don't care") should be represented by a pattern of twelve zero bytes, and a mask of "0xed,0x01", not "0xed,0x07". mask_len = (pat_len + 7) / 8 = (12 + 7) / 8 = 2 Hence the mask will be of 2 bytes. Replace each valid byte in pattern by 1 and don't care byte by 0: 10110111 1000 (0000) 1st byte of pattern corresponds to lower order bit in first byte of mask. And 9th byte of pattern corresponds to lower order bit in second byte of mask. With this logic the mask will be 11101101 00000001 = 0xed 0x01 Signed-off-by: Amitkumar Karwar Signed-off-by: Bing Zhao Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 9a2ecdc4136c..b23321154e8b 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -2906,7 +2906,7 @@ enum nl80211_tx_power_setting { * corresponds to the lowest-order bit in the second byte of the mask. * For example: The match 00:xx:00:00:xx:00:00:00:00:xx:xx:xx (where * xx indicates "don't care") would be represented by a pattern of - * twelve zero bytes, and a mask of "0xed,0x07". + * twelve zero bytes, and a mask of "0xed,0x01". * Note that the pattern matching is done as though frames were not * 802.11 frames but 802.3 frames, i.e. the frame is fully unpacked * first (including SNAP header unpacking) and then matched. From 66d575705154525c33ab99b5f9ac2d246c348db6 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Sun, 10 Feb 2013 15:55:20 +0200 Subject: [PATCH 150/209] mac80211: allow driver to be stateless wrt. SMSP requests Bail out if no update is made to the SMPS state. This allows the driver to avoid duplicating the state. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- net/mac80211/ht.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/mac80211/ht.c b/net/mac80211/ht.c index 61ac7c48ac0c..9e7560becbbb 100644 --- a/net/mac80211/ht.c +++ b/net/mac80211/ht.c @@ -406,6 +406,9 @@ void ieee80211_request_smps(struct ieee80211_vif *vif, if (WARN_ON(smps_mode == IEEE80211_SMPS_OFF)) smps_mode = IEEE80211_SMPS_AUTOMATIC; + if (sdata->u.mgd.driver_smps_mode == smps_mode) + return; + sdata->u.mgd.driver_smps_mode = smps_mode; ieee80211_queue_work(&sdata->local->hw, From 5360cfb2bcbdd7a906cf290036bd406985973e88 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Mon, 11 Feb 2013 15:56:01 +0200 Subject: [PATCH 151/209] iwlwifi: mvm: use atomic interface iteration to avoid deadlock Using the non-atomic version creates a dependency between mac80211's iflist_mtx and mvm->mutex. Use the atomic version instead which doesn't take iflist_mtx but can't sleep, so send the HCMD in ASYNC. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/mvm/mac80211.c | 2 +- drivers/net/wireless/iwlwifi/mvm/power.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c index a6b05a02cfd4..64acc4a597fb 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c @@ -475,7 +475,7 @@ static int iwl_mvm_mac_add_interface(struct ieee80211_hw *hw, if (mvm->vif_count > 1) { IWL_DEBUG_MAC80211(mvm, "Disable power on existing interfaces\n"); - ieee80211_iterate_active_interfaces( + ieee80211_iterate_active_interfaces_atomic( mvm->hw, IEEE80211_IFACE_ITER_NORMAL, iwl_mvm_pm_disable_iterator, mvm); diff --git a/drivers/net/wireless/iwlwifi/mvm/power.c b/drivers/net/wireless/iwlwifi/mvm/power.c index 63628739cf4a..5a92a4978795 100644 --- a/drivers/net/wireless/iwlwifi/mvm/power.c +++ b/drivers/net/wireless/iwlwifi/mvm/power.c @@ -194,7 +194,7 @@ int iwl_mvm_power_disable(struct iwl_mvm *mvm, struct ieee80211_vif *vif) cmd.id_and_color, iwlmvm_mod_params.power_scheme, le16_to_cpu(cmd.flags)); - return iwl_mvm_send_cmd_pdu(mvm, POWER_TABLE_CMD, CMD_SYNC, + return iwl_mvm_send_cmd_pdu(mvm, POWER_TABLE_CMD, CMD_ASYNC, sizeof(cmd), &cmd); } From 5718d27fc9a076ca397ea8c3d70e29969be24b9b Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 8 Jan 2013 11:29:12 +0100 Subject: [PATCH 152/209] iwlwifi: dvm: query and report WoWLAN wakeup reason Implement proper WoWLAN wakeup and query the wakeup reasons, then report them to userspace. Note that this is tricky: a firmware bug (that has been fixed in later versions) means that the status command response isn't properly closed in hardware and thus won't arrive at the host. Sending another command after it closes the status response but the next command gets stuck, etc. We reset the device after querying though, so this is not a big issue, just makes for strange code. Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/dvm/commands.h | 18 ++ drivers/net/wireless/iwlwifi/dvm/mac80211.c | 173 ++++++++++++++++---- 2 files changed, 156 insertions(+), 35 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/dvm/commands.h b/drivers/net/wireless/iwlwifi/dvm/commands.h index 8bce4b0148e0..02c9ebb3b340 100644 --- a/drivers/net/wireless/iwlwifi/dvm/commands.h +++ b/drivers/net/wireless/iwlwifi/dvm/commands.h @@ -3897,6 +3897,24 @@ struct iwlagn_wowlan_kek_kck_material_cmd { __le64 replay_ctr; } __packed; +#define RF_KILL_INDICATOR_FOR_WOWLAN 0x87 + +/* + * REPLY_WOWLAN_GET_STATUS = 0xe5 + */ +struct iwlagn_wowlan_status { + __le64 replay_ctr; + __le32 rekey_status; + __le32 wakeup_reason; + u8 pattern_number; + u8 reserved1; + __le16 qos_seq_ctr[8]; + __le16 non_qos_seq_ctr; + __le16 reserved2; + union iwlagn_all_tsc_rsc tsc_rsc; + __le16 reserved3; +} __packed; + /* * REPLY_WIPAN_PARAMS = 0xb2 (Commands and Notification) */ diff --git a/drivers/net/wireless/iwlwifi/dvm/mac80211.c b/drivers/net/wireless/iwlwifi/dvm/mac80211.c index 75f6f6cfdd47..ebbfcf47c732 100644 --- a/drivers/net/wireless/iwlwifi/dvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/dvm/mac80211.c @@ -442,53 +442,155 @@ static int iwlagn_mac_suspend(struct ieee80211_hw *hw, return ret; } +struct iwl_resume_data { + struct iwl_priv *priv; + struct iwlagn_wowlan_status *cmd; + bool valid; +}; + +static bool iwl_resume_status_fn(struct iwl_notif_wait_data *notif_wait, + struct iwl_rx_packet *pkt, void *data) +{ + struct iwl_resume_data *resume_data = data; + struct iwl_priv *priv = resume_data->priv; + u32 len = le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK; + + if (len - 4 != sizeof(*resume_data->cmd)) { + IWL_ERR(priv, "rx wrong size data\n"); + return true; + } + memcpy(resume_data->cmd, pkt->data, sizeof(*resume_data->cmd)); + resume_data->valid = true; + + return true; +} + static int iwlagn_mac_resume(struct ieee80211_hw *hw) { struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; struct ieee80211_vif *vif; - unsigned long flags; - u32 base, status = 0xffffffff; - int ret = -EIO; + u32 base; + int ret; + enum iwl_d3_status d3_status; + struct error_table_start { + /* cf. struct iwl_error_event_table */ + u32 valid; + u32 error_id; + } err_info; + struct iwl_notification_wait status_wait; + static const u8 status_cmd[] = { + REPLY_WOWLAN_GET_STATUS, + }; + struct iwlagn_wowlan_status status_data = {}; + struct iwl_resume_data resume_data = { + .priv = priv, + .cmd = &status_data, + .valid = false, + }; + struct cfg80211_wowlan_wakeup wakeup = { + .pattern_idx = -1, + }; +#ifdef CONFIG_IWLWIFI_DEBUGFS + const struct fw_img *img; +#endif IWL_DEBUG_MAC80211(priv, "enter\n"); mutex_lock(&priv->mutex); - iwl_write32(priv->trans, CSR_UCODE_DRV_GP1_CLR, - CSR_UCODE_DRV_GP1_BIT_D3_CFG_COMPLETE); - - base = priv->device_pointers.error_event_table; - if (iwlagn_hw_valid_rtc_data_addr(base)) { - if (iwl_trans_grab_nic_access(priv->trans, true, &flags)) { - iwl_write32(priv->trans, HBUS_TARG_MEM_RADDR, base); - status = iwl_read32(priv->trans, HBUS_TARG_MEM_RDAT); - iwl_trans_release_nic_access(priv->trans, &flags); - ret = 0; - } - -#ifdef CONFIG_IWLWIFI_DEBUGFS - if (ret == 0) { - const struct fw_img *img; - - img = &(priv->fw->img[IWL_UCODE_WOWLAN]); - if (!priv->wowlan_sram) { - priv->wowlan_sram = - kzalloc(img->sec[IWL_UCODE_SECTION_DATA].len, - GFP_KERNEL); - } - - if (priv->wowlan_sram) - iwl_trans_read_mem( - priv->trans, 0x800000, - priv->wowlan_sram, - img->sec[IWL_UCODE_SECTION_DATA].len / 4); - } -#endif - } - /* we'll clear ctx->vif during iwlagn_prepare_restart() */ vif = ctx->vif; + ret = iwl_trans_d3_resume(priv->trans, &d3_status); + if (ret) + goto out_unlock; + + if (d3_status != IWL_D3_STATUS_ALIVE) { + IWL_INFO(priv, "Device was reset during suspend\n"); + goto out_unlock; + } + + base = priv->device_pointers.error_event_table; + if (!iwlagn_hw_valid_rtc_data_addr(base)) { + IWL_WARN(priv, "Invalid error table during resume!\n"); + goto out_unlock; + } + + iwl_trans_read_mem_bytes(priv->trans, base, + &err_info, sizeof(err_info)); + + if (err_info.valid) { + IWL_INFO(priv, "error table is valid (%d, 0x%x)\n", + err_info.valid, err_info.error_id); + if (err_info.error_id == RF_KILL_INDICATOR_FOR_WOWLAN) { + wakeup.rfkill_release = true; + ieee80211_report_wowlan_wakeup(vif, &wakeup, + GFP_KERNEL); + } + goto out_unlock; + } + +#ifdef CONFIG_IWLWIFI_DEBUGFS + img = &priv->fw->img[IWL_UCODE_WOWLAN]; + if (!priv->wowlan_sram) + priv->wowlan_sram = + kzalloc(img->sec[IWL_UCODE_SECTION_DATA].len, + GFP_KERNEL); + + if (priv->wowlan_sram) + iwl_trans_read_mem(priv->trans, 0x800000, + priv->wowlan_sram, + img->sec[IWL_UCODE_SECTION_DATA].len / 4); +#endif + + /* + * This is very strange. The GET_STATUS command is sent but the device + * doesn't reply properly, it seems it doesn't close the RBD so one is + * always left open ... As a result, we need to send another command + * and have to reset the driver afterwards. As we need to switch to + * runtime firmware again that'll happen. + */ + + iwl_init_notification_wait(&priv->notif_wait, &status_wait, status_cmd, + ARRAY_SIZE(status_cmd), iwl_resume_status_fn, + &resume_data); + + iwl_dvm_send_cmd_pdu(priv, REPLY_WOWLAN_GET_STATUS, CMD_ASYNC, 0, NULL); + iwl_dvm_send_cmd_pdu(priv, REPLY_ECHO, CMD_ASYNC, 0, NULL); + /* an RBD is left open in the firmware now! */ + + ret = iwl_wait_notification(&priv->notif_wait, &status_wait, HZ/5); + if (ret) + goto out_unlock; + + if (resume_data.valid && priv->contexts[IWL_RXON_CTX_BSS].vif) { + u32 reasons = le32_to_cpu(status_data.wakeup_reason); + struct cfg80211_wowlan_wakeup *wakeup_report; + + IWL_INFO(priv, "WoWLAN wakeup reason(s): 0x%.8x\n", reasons); + + if (reasons) { + if (reasons & IWLAGN_WOWLAN_WAKEUP_MAGIC_PACKET) + wakeup.magic_pkt = true; + if (reasons & IWLAGN_WOWLAN_WAKEUP_PATTERN_MATCH) + wakeup.pattern_idx = status_data.pattern_number; + if (reasons & (IWLAGN_WOWLAN_WAKEUP_BEACON_MISS | + IWLAGN_WOWLAN_WAKEUP_LINK_CHANGE)) + wakeup.disconnect = true; + if (reasons & IWLAGN_WOWLAN_WAKEUP_GTK_REKEY_FAIL) + wakeup.gtk_rekey_failure = true; + if (reasons & IWLAGN_WOWLAN_WAKEUP_EAP_IDENT_REQ) + wakeup.eap_identity_req = true; + if (reasons & IWLAGN_WOWLAN_WAKEUP_4WAY_HANDSHAKE) + wakeup.four_way_handshake = true; + wakeup_report = &wakeup; + } else { + wakeup_report = NULL; + } + + ieee80211_report_wowlan_wakeup(vif, wakeup_report, GFP_KERNEL); + } + priv->wowlan = false; iwlagn_prepare_restart(priv); @@ -497,6 +599,7 @@ static int iwlagn_mac_resume(struct ieee80211_hw *hw) iwl_connection_init_rx_config(priv, ctx); iwlagn_set_rxon_chain(priv, ctx); + out_unlock: mutex_unlock(&priv->mutex); IWL_DEBUG_MAC80211(priv, "leave\n"); From 9b26b5002937850846046a99de8c6065ff86fa6d Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 22 Jan 2013 13:02:09 +0100 Subject: [PATCH 153/209] iwlwifi: mvm: report wakeup reasons Query the wakeup reasons properly and then report them to mac80211. Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/mvm/d3.c | 168 +++++++++++++++++++++----- 1 file changed, 141 insertions(+), 27 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/mvm/d3.c b/drivers/net/wireless/iwlwifi/mvm/d3.c index 5b2c675a8752..a00267f6bc05 100644 --- a/drivers/net/wireless/iwlwifi/mvm/d3.c +++ b/drivers/net/wireless/iwlwifi/mvm/d3.c @@ -763,6 +763,146 @@ int iwl_mvm_suspend(struct ieee80211_hw *hw, struct cfg80211_wowlan *wowlan) return ret; } +static void iwl_mvm_query_wakeup_reasons(struct iwl_mvm *mvm, + struct ieee80211_vif *vif) +{ + u32 base = mvm->error_event_table; + struct error_table_start { + /* cf. struct iwl_error_event_table */ + u32 valid; + u32 error_id; + } err_info; + struct cfg80211_wowlan_wakeup wakeup = { + .pattern_idx = -1, + }; + struct cfg80211_wowlan_wakeup *wakeup_report = &wakeup; + struct iwl_host_cmd cmd = { + .id = WOWLAN_GET_STATUSES, + .flags = CMD_SYNC | CMD_WANT_SKB, + }; + struct iwl_wowlan_status *status; + u32 reasons; + int ret, len; + bool pkt8023 = false; + struct sk_buff *pkt = NULL; + + iwl_trans_read_mem_bytes(mvm->trans, base, + &err_info, sizeof(err_info)); + + if (err_info.valid) { + IWL_INFO(mvm, "error table is valid (%d)\n", + err_info.valid); + if (err_info.error_id == RF_KILL_INDICATOR_FOR_WOWLAN) { + wakeup.rfkill_release = true; + ieee80211_report_wowlan_wakeup(vif, &wakeup, + GFP_KERNEL); + } + return; + } + + /* only for tracing for now */ + ret = iwl_mvm_send_cmd_pdu(mvm, OFFLOADS_QUERY_CMD, CMD_SYNC, 0, NULL); + if (ret) + IWL_ERR(mvm, "failed to query offload statistics (%d)\n", ret); + + ret = iwl_mvm_send_cmd(mvm, &cmd); + if (ret) { + IWL_ERR(mvm, "failed to query status (%d)\n", ret); + return; + } + + /* RF-kill already asserted again... */ + if (!cmd.resp_pkt) + return; + + len = le32_to_cpu(cmd.resp_pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK; + if (len - sizeof(struct iwl_cmd_header) < sizeof(*status)) { + IWL_ERR(mvm, "Invalid WoWLAN status response!\n"); + goto out; + } + + status = (void *)cmd.resp_pkt->data; + + if (len - sizeof(struct iwl_cmd_header) != + sizeof(*status) + le32_to_cpu(status->wake_packet_bufsize)) { + IWL_ERR(mvm, "Invalid WoWLAN status response!\n"); + goto out; + } + + reasons = le32_to_cpu(status->wakeup_reasons); + + if (reasons == IWL_WOWLAN_WAKEUP_BY_NON_WIRELESS) { + wakeup_report = NULL; + goto report; + } + + if (reasons & IWL_WOWLAN_WAKEUP_BY_MAGIC_PACKET) { + wakeup.magic_pkt = true; + pkt8023 = true; + } + + if (reasons & IWL_WOWLAN_WAKEUP_BY_PATTERN) { + wakeup.pattern_idx = + le16_to_cpu(status->pattern_number); + pkt8023 = true; + } + + if (reasons & (IWL_WOWLAN_WAKEUP_BY_DISCONNECTION_ON_MISSED_BEACON | + IWL_WOWLAN_WAKEUP_BY_DISCONNECTION_ON_DEAUTH)) + wakeup.disconnect = true; + + if (reasons & IWL_WOWLAN_WAKEUP_BY_GTK_REKEY_FAILURE) { + wakeup.gtk_rekey_failure = true; + pkt8023 = true; + } + + if (reasons & IWL_WOWLAN_WAKEUP_BY_RFKILL_DEASSERTED) { + wakeup.rfkill_release = true; + pkt8023 = true; + } + + if (reasons & IWL_WOWLAN_WAKEUP_BY_EAPOL_REQUEST) { + wakeup.eap_identity_req = true; + pkt8023 = true; + } + + if (reasons & IWL_WOWLAN_WAKEUP_BY_FOUR_WAY_HANDSHAKE) { + wakeup.four_way_handshake = true; + pkt8023 = true; + } + + if (status->wake_packet_bufsize) { + u32 pktsize = le32_to_cpu(status->wake_packet_bufsize); + u32 pktlen = le32_to_cpu(status->wake_packet_length); + + if (pkt8023) { + pkt = alloc_skb(pktsize, GFP_KERNEL); + if (!pkt) + goto report; + memcpy(skb_put(pkt, pktsize), status->wake_packet, + pktsize); + if (ieee80211_data_to_8023(pkt, vif->addr, vif->type)) + goto report; + wakeup.packet = pkt->data; + wakeup.packet_present_len = pkt->len; + wakeup.packet_len = pkt->len - (pktlen - pktsize); + wakeup.packet_80211 = false; + } else { + wakeup.packet = status->wake_packet; + wakeup.packet_present_len = pktsize; + wakeup.packet_len = pktlen; + wakeup.packet_80211 = true; + } + } + + report: + ieee80211_report_wowlan_wakeup(vif, wakeup_report, GFP_KERNEL); + kfree_skb(pkt); + + out: + iwl_free_resp(&cmd); +} + int iwl_mvm_resume(struct ieee80211_hw *hw) { struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw); @@ -770,14 +910,8 @@ int iwl_mvm_resume(struct ieee80211_hw *hw) .mvm = mvm, }; struct ieee80211_vif *vif = NULL; - u32 base; int ret; enum iwl_d3_status d3_status; - struct error_table_start { - /* cf. struct iwl_error_event_table */ - u32 valid; - u32 error_id; - } err_info; mutex_lock(&mvm->mutex); @@ -800,27 +934,7 @@ int iwl_mvm_resume(struct ieee80211_hw *hw) goto out_unlock; } - base = mvm->error_event_table; - - iwl_trans_read_mem_bytes(mvm->trans, base, - &err_info, sizeof(err_info)); - - if (err_info.valid) { - IWL_INFO(mvm, "error table is valid (%d)\n", - err_info.valid); - if (err_info.error_id == RF_KILL_INDICATOR_FOR_WOWLAN) - IWL_ERR(mvm, "this was due to RF-kill\n"); - goto out_unlock; - } - - /* TODO: get status and whatever else ... */ - ret = iwl_mvm_send_cmd_pdu(mvm, WOWLAN_GET_STATUSES, CMD_SYNC, 0, NULL); - if (ret) - IWL_ERR(mvm, "failed to query status (%d)\n", ret); - - ret = iwl_mvm_send_cmd_pdu(mvm, OFFLOADS_QUERY_CMD, CMD_SYNC, 0, NULL); - if (ret) - IWL_ERR(mvm, "failed to query offloads (%d)\n", ret); + iwl_mvm_query_wakeup_reasons(mvm, vif); out_unlock: mutex_unlock(&mvm->mutex); From 739e42f4f3fc5906db049b54e45498c7ab5bba81 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 8 Feb 2013 23:13:39 +0100 Subject: [PATCH 154/209] iwlwifi: dvm: apply beacon changes immediately If the AP/GO beacon changes, apply such a change immediately, otherwise the AP/GO beacon can be stale for a long time. Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/dvm/rxon.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/dvm/rxon.c b/drivers/net/wireless/iwlwifi/dvm/rxon.c index 9fabd26997ca..23be948cf162 100644 --- a/drivers/net/wireless/iwlwifi/dvm/rxon.c +++ b/drivers/net/wireless/iwlwifi/dvm/rxon.c @@ -1545,10 +1545,9 @@ void iwlagn_bss_info_changed(struct ieee80211_hw *hw, bss_conf->bssid); } - if (changes & BSS_CHANGED_BEACON && vif->type == NL80211_IFTYPE_ADHOC && - priv->beacon_ctx) { + if (changes & BSS_CHANGED_BEACON && priv->beacon_ctx == ctx) { if (iwlagn_update_beacon(priv, vif)) - IWL_ERR(priv, "Error sending IBSS beacon\n"); + IWL_ERR(priv, "Error updating beacon\n"); } mutex_unlock(&priv->mutex); From 210a544e78c7ce4e5aa5ec199eeb807b0f03b5b2 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 24 Jan 2013 23:48:23 +0100 Subject: [PATCH 155/209] iwlwifi: mvm: don't delay the association until after beacon If we haven't heard a beacon before we associate we can still start the association process and set the MAC in the firmware to associated only after having received a beacon with DTIM period by reacting to the new change flag (BSS_CHANGED_DTIM_PERIOD) from mac80211. This reduces the association time in these cases. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c | 6 +++++- drivers/net/wireless/iwlwifi/mvm/mac80211.c | 10 +++++++--- drivers/net/wireless/iwlwifi/mvm/time-event.c | 4 +++- 3 files changed, 15 insertions(+), 5 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c b/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c index c08a17a3cab9..0854dc338881 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c @@ -584,7 +584,11 @@ static void iwl_mvm_mac_ctxt_cmd_fill_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif, struct iwl_mac_data_sta *ctxt_sta) { - ctxt_sta->is_assoc = cpu_to_le32(vif->bss_conf.assoc ? 1 : 0); + /* We need the dtim_period to set the MAC as associated */ + if (vif->bss_conf.assoc && vif->bss_conf.dtim_period) + ctxt_sta->is_assoc = cpu_to_le32(1); + else + ctxt_sta->is_assoc = cpu_to_le32(0); ctxt_sta->bi = cpu_to_le32(vif->bss_conf.beacon_int); ctxt_sta->bi_reciprocal = diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c index e0d79e328d0c..6bfcb3b5bfa6 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c @@ -114,7 +114,6 @@ int iwl_mvm_mac_setup_register(struct iwl_mvm *mvm) IEEE80211_HW_QUEUE_CONTROL | IEEE80211_HW_WANT_MONITOR_VIF | IEEE80211_HW_SCAN_WHILE_IDLE | - IEEE80211_HW_NEED_DTIM_BEFORE_ASSOC | IEEE80211_HW_SUPPORTS_PS | IEEE80211_HW_SUPPORTS_DYNAMIC_PS | IEEE80211_HW_AMPDU_AGGREGATION; @@ -671,8 +670,6 @@ static void iwl_mvm_bss_info_changed_station(struct iwl_mvm *mvm, IWL_ERR(mvm, "failed to update quotas\n"); return; } - iwl_mvm_remove_time_event(mvm, mvmvif, - &mvmvif->time_event_data); } else if (mvmvif->ap_sta_id != IWL_MVM_STATION_COUNT) { /* remove AP station now that the MAC is unassoc */ ret = iwl_mvm_rm_sta_id(mvm, vif, mvmvif->ap_sta_id); @@ -684,6 +681,13 @@ static void iwl_mvm_bss_info_changed_station(struct iwl_mvm *mvm, if (ret) IWL_ERR(mvm, "failed to update quotas\n"); } + } else if (changes & BSS_CHANGED_DTIM_PERIOD) { + /* + * We received a beacon _after_ association so + * remove the session protection. + */ + iwl_mvm_remove_time_event(mvm, mvmvif, + &mvmvif->time_event_data); } else if (changes & BSS_CHANGED_PS) { /* * TODO: remove this temporary code. diff --git a/drivers/net/wireless/iwlwifi/mvm/time-event.c b/drivers/net/wireless/iwlwifi/mvm/time-event.c index 4d62a5d4254d..194bfb7a7d7f 100644 --- a/drivers/net/wireless/iwlwifi/mvm/time-event.c +++ b/drivers/net/wireless/iwlwifi/mvm/time-event.c @@ -184,9 +184,11 @@ static void iwl_mvm_te_handle_notif(struct iwl_mvm *mvm, */ if (te_data->vif->type == NL80211_IFTYPE_STATION && (!te_data->vif->bss_conf.assoc || - !te_data->vif->bss_conf.dtim_period)) + !te_data->vif->bss_conf.dtim_period)) { IWL_ERR(mvm, "No assocation and the time event is over already...\n"); + ieee80211_connection_loss(te_data->vif); + } iwl_mvm_te_clear_data(mvm, te_data); } else if (le32_to_cpu(notif->action) == TE_NOTIF_HOST_START) { From ffdf968d878f85620c1d4685b9543f894ef56db0 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 29 Jan 2013 15:28:17 +0100 Subject: [PATCH 156/209] iwlwifi: mvm: don't wait for session protection to start Now that mac80211 no longer starts the auth/assoc timeouts when it transmits the frame, but only when the frame status arrives, we no longer need to wait for the session protection time event to start, we can schedule it and enqueue the auth/assoc frame right away. This reduces the amount of time we block mac80211's workqueue. Also, since now we no longer need different behavior for session protection and P2P time events, refactor the code to have just a common implementation. Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/mvm/time-event.c | 219 ++++++------------ 1 file changed, 75 insertions(+), 144 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/mvm/time-event.c b/drivers/net/wireless/iwlwifi/mvm/time-event.c index 194bfb7a7d7f..c09b71f23759 100644 --- a/drivers/net/wireless/iwlwifi/mvm/time-event.c +++ b/drivers/net/wireless/iwlwifi/mvm/time-event.c @@ -230,57 +230,86 @@ int iwl_mvm_rx_time_event_notif(struct iwl_mvm *mvm, return 0; } -static bool iwl_mvm_time_event_notif(struct iwl_notif_wait_data *notif_wait, - struct iwl_rx_packet *pkt, void *data) +static bool iwl_mvm_time_event_response(struct iwl_notif_wait_data *notif_wait, + struct iwl_rx_packet *pkt, void *data) { struct iwl_mvm *mvm = container_of(notif_wait, struct iwl_mvm, notif_wait); struct iwl_mvm_time_event_data *te_data = data; - struct ieee80211_vif *vif = te_data->vif; - struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); - struct iwl_time_event_notif *notif; struct iwl_time_event_resp *resp; + int resp_len = le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK; - u32 mac_id_n_color = FW_CMD_ID_AND_COLOR(mvmvif->id, mvmvif->color); - - /* until we do something else */ - WARN_ON(te_data->id != TE_BSS_STA_AGGRESSIVE_ASSOC); - - switch (pkt->hdr.cmd) { - case TIME_EVENT_CMD: - resp = (void *)pkt->data; - /* TODO: I can't check that since the fw is buggy - it doesn't - * put the right values when we remove a TE. We can be here - * when we remove a TE because the remove TE command is sent in - * ASYNC... - * WARN_ON(mac_id_n_color != le32_to_cpu(resp->id_and_color)); - */ - te_data->uid = le32_to_cpu(resp->unique_id); - IWL_DEBUG_TE(mvm, "Got response - UID = 0x%x\n", te_data->uid); - return false; - - case TIME_EVENT_NOTIFICATION: - notif = (void *)pkt->data; - WARN_ON(le32_to_cpu(notif->status) != 1); - WARN_ON(mac_id_n_color != le32_to_cpu(notif->id_and_color)); - /* check if this is our Time Event that is starting */ - if (le32_to_cpu(notif->unique_id) != te_data->uid) - return false; - IWL_DEBUG_TE(mvm, "Event %d is starting - time is %d\n", - te_data->uid, le32_to_cpu(notif->timestamp)); - - WARN_ONCE(!le32_to_cpu(notif->status), - "Failed to schedule protected session TE\n"); - - te_data->running = true; - te_data->end_jiffies = jiffies + - TU_TO_JIFFIES(te_data->duration); + if (WARN_ON(pkt->hdr.cmd != TIME_EVENT_CMD)) return true; - default: - WARN_ON(1); - return false; - }; + if (WARN_ON_ONCE(resp_len != sizeof(pkt->hdr) + sizeof(*resp))) { + IWL_ERR(mvm, "Invalid TIME_EVENT_CMD response\n"); + return true; + } + + resp = (void *)pkt->data; + te_data->uid = le32_to_cpu(resp->unique_id); + IWL_DEBUG_TE(mvm, "TIME_EVENT_CMD response - UID = 0x%x\n", + te_data->uid); + return true; +} + +static int iwl_mvm_time_event_send_add(struct iwl_mvm *mvm, + struct ieee80211_vif *vif, + struct iwl_mvm_time_event_data *te_data, + struct iwl_time_event_cmd *te_cmd) +{ + static const u8 time_event_response[] = { TIME_EVENT_CMD }; + struct iwl_notification_wait wait_time_event; + int ret; + + lockdep_assert_held(&mvm->mutex); + + spin_lock_bh(&mvm->time_event_lock); + if (WARN_ON(te_data->id != TE_MAX)) { + spin_unlock_bh(&mvm->time_event_lock); + return -EIO; + } + te_data->vif = vif; + te_data->duration = le32_to_cpu(te_cmd->duration); + te_data->id = le32_to_cpu(te_cmd->id); + list_add_tail(&te_data->list, &mvm->time_event_list); + spin_unlock_bh(&mvm->time_event_lock); + + /* + * Use a notification wait, which really just processes the + * command response and doesn't wait for anything, in order + * to be able to process the response and get the UID inside + * the RX path. Using CMD_WANT_SKB doesn't work because it + * stores the buffer and then wakes up this thread, by which + * time another notification (that the time event started) + * might already be processed unsuccessfully. + */ + iwl_init_notification_wait(&mvm->notif_wait, &wait_time_event, + time_event_response, + ARRAY_SIZE(time_event_response), + iwl_mvm_time_event_response, te_data); + + ret = iwl_mvm_send_cmd_pdu(mvm, TIME_EVENT_CMD, CMD_SYNC, + sizeof(*te_cmd), te_cmd); + if (ret) { + IWL_ERR(mvm, "Couldn't send TIME_EVENT_CMD: %d\n", ret); + iwl_remove_notification(&mvm->notif_wait, &wait_time_event); + goto out_clear_te; + } + + /* No need to wait for anything, so just pass 1 (0 isn't valid) */ + ret = iwl_wait_notification(&mvm->notif_wait, &wait_time_event, 1); + /* should never fail */ + WARN_ON_ONCE(ret); + + if (ret) { + out_clear_te: + spin_lock_bh(&mvm->time_event_lock); + iwl_mvm_te_clear_data(mvm, te_data); + spin_unlock_bh(&mvm->time_event_lock); + } + return ret; } void iwl_mvm_protect_session(struct iwl_mvm *mvm, @@ -289,11 +318,7 @@ void iwl_mvm_protect_session(struct iwl_mvm *mvm, { struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); struct iwl_mvm_time_event_data *te_data = &mvmvif->time_event_data; - static const u8 time_event_notif[] = { TIME_EVENT_CMD, - TIME_EVENT_NOTIFICATION }; - struct iwl_notification_wait wait_time_event; struct iwl_time_event_cmd time_cmd = {}; - int ret; lockdep_assert_held(&mvm->mutex); @@ -320,12 +345,6 @@ void iwl_mvm_protect_session(struct iwl_mvm *mvm, iwl_mvm_stop_session_protection(mvm, vif); } - iwl_init_notification_wait(&mvm->notif_wait, &wait_time_event, - time_event_notif, - ARRAY_SIZE(time_event_notif), - iwl_mvm_time_event_notif, - &mvmvif->time_event_data); - time_cmd.action = cpu_to_le32(FW_CTXT_ACTION_ADD); time_cmd.id_and_color = cpu_to_le32(FW_CMD_ID_AND_COLOR(mvmvif->id, mvmvif->color)); @@ -333,6 +352,7 @@ void iwl_mvm_protect_session(struct iwl_mvm *mvm, time_cmd.apply_time = cpu_to_le32(iwl_read_prph(mvm->trans, DEVICE_SYSTEM_TIME_REG)); + time_cmd.dep_policy = TE_INDEPENDENT; time_cmd.is_present = cpu_to_le32(1); time_cmd.max_frags = cpu_to_le32(TE_FRAG_NONE); @@ -344,33 +364,7 @@ void iwl_mvm_protect_session(struct iwl_mvm *mvm, time_cmd.repeat = cpu_to_le32(1); time_cmd.notify = cpu_to_le32(TE_NOTIF_HOST_START | TE_NOTIF_HOST_END); - te_data->vif = vif; - te_data->duration = duration; - - spin_lock_bh(&mvm->time_event_lock); - te_data->id = le32_to_cpu(time_cmd.id); - list_add_tail(&te_data->list, &mvm->time_event_list); - spin_unlock_bh(&mvm->time_event_lock); - - ret = iwl_mvm_send_cmd_pdu(mvm, TIME_EVENT_CMD, CMD_SYNC, - sizeof(time_cmd), &time_cmd); - if (ret) { - IWL_ERR(mvm, "Couldn't send TIME_EVENT_CMD: %d\n", ret); - goto out_remove_notif; - } - - ret = iwl_wait_notification(&mvm->notif_wait, &wait_time_event, 1 * HZ); - if (ret) { - IWL_ERR(mvm, "%s - failed on timeout\n", __func__); - spin_lock_bh(&mvm->time_event_lock); - iwl_mvm_te_clear_data(mvm, te_data); - spin_unlock_bh(&mvm->time_event_lock); - } - - return; - -out_remove_notif: - iwl_remove_notification(&mvm->notif_wait, &wait_time_event); + iwl_mvm_time_event_send_add(mvm, vif, te_data, &time_cmd); } /* @@ -435,43 +429,12 @@ void iwl_mvm_stop_session_protection(struct iwl_mvm *mvm, iwl_mvm_remove_time_event(mvm, mvmvif, te_data); } -static bool iwl_mvm_roc_te_notif(struct iwl_notif_wait_data *notif_wait, - struct iwl_rx_packet *pkt, void *data) -{ - struct iwl_mvm *mvm = - container_of(notif_wait, struct iwl_mvm, notif_wait); - struct iwl_mvm_time_event_data *te_data = data; - struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(te_data->vif); - struct iwl_time_event_resp *resp; - - u32 mac_id_n_color = FW_CMD_ID_AND_COLOR(mvmvif->id, mvmvif->color); - - /* until we do something else */ - WARN_ON(te_data->id != IWL_MVM_ROC_TE_TYPE); - - switch (pkt->hdr.cmd) { - case TIME_EVENT_CMD: - resp = (void *)pkt->data; - WARN_ON(mac_id_n_color != le32_to_cpu(resp->id_and_color)); - te_data->uid = le32_to_cpu(resp->unique_id); - IWL_DEBUG_TE(mvm, "Got response - UID = 0x%x\n", te_data->uid); - return true; - - default: - WARN_ON(1); - return false; - }; -} - int iwl_mvm_start_p2p_roc(struct iwl_mvm *mvm, struct ieee80211_vif *vif, int duration) { struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); struct iwl_mvm_time_event_data *te_data = &mvmvif->time_event_data; - static const u8 roc_te_notif[] = { TIME_EVENT_CMD }; - struct iwl_notification_wait wait_time_event; struct iwl_time_event_cmd time_cmd = {}; - int ret; lockdep_assert_held(&mvm->mutex); if (te_data->running) { @@ -485,12 +448,6 @@ int iwl_mvm_start_p2p_roc(struct iwl_mvm *mvm, struct ieee80211_vif *vif, */ flush_work(&mvm->roc_done_wk); - iwl_init_notification_wait(&mvm->notif_wait, &wait_time_event, - roc_te_notif, - ARRAY_SIZE(roc_te_notif), - iwl_mvm_roc_te_notif, - &mvmvif->time_event_data); - time_cmd.action = cpu_to_le32(FW_CTXT_ACTION_ADD); time_cmd.id_and_color = cpu_to_le32(FW_CMD_ID_AND_COLOR(mvmvif->id, mvmvif->color)); @@ -516,33 +473,7 @@ int iwl_mvm_start_p2p_roc(struct iwl_mvm *mvm, struct ieee80211_vif *vif, time_cmd.repeat = cpu_to_le32(1); time_cmd.notify = cpu_to_le32(TE_NOTIF_HOST_START | TE_NOTIF_HOST_END); - /* Push the te data to the tracked te list */ - te_data->vif = vif; - te_data->duration = MSEC_TO_TU(duration); - - spin_lock_bh(&mvm->time_event_lock); - te_data->id = le32_to_cpu(time_cmd.id); - list_add_tail(&te_data->list, &mvm->time_event_list); - spin_unlock_bh(&mvm->time_event_lock); - - ret = iwl_mvm_send_cmd_pdu(mvm, TIME_EVENT_CMD, CMD_SYNC, - sizeof(time_cmd), &time_cmd); - if (ret) { - IWL_ERR(mvm, "Couldn't send TIME_EVENT_CMD: %d\n", ret); - goto out_remove_notif; - } - - ret = iwl_wait_notification(&mvm->notif_wait, &wait_time_event, 1 * HZ); - if (ret) { - IWL_ERR(mvm, "%s - failed on timeout\n", __func__); - iwl_mvm_te_clear_data(mvm, te_data); - } - - return ret; - -out_remove_notif: - iwl_remove_notification(&mvm->notif_wait, &wait_time_event); - return ret; + return iwl_mvm_time_event_send_add(mvm, vif, te_data, &time_cmd); } void iwl_mvm_stop_p2p_roc(struct iwl_mvm *mvm) From 7a4539736eaeecb6bec25a718492fed6377a23af Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 12 Feb 2013 13:10:44 +0100 Subject: [PATCH 157/209] iwlwifi: mvm: update station when marked associated In managed mode, the HT/VHT capabilities aren't set when the station is initially added, so update the station when it is marked associated. In AP/GO mode, the station will typically be added with full capabilities today, but an upcoming change in hostapd may mean a similar scenario as for managed mode, therefore do the update unconditionally. Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/mvm/d3.c | 2 +- drivers/net/wireless/iwlwifi/mvm/mac80211.c | 6 ++++-- drivers/net/wireless/iwlwifi/mvm/sta.c | 21 ++++++++++++++++----- drivers/net/wireless/iwlwifi/mvm/sta.h | 6 +++++- 4 files changed, 26 insertions(+), 9 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/mvm/d3.c b/drivers/net/wireless/iwlwifi/mvm/d3.c index a00267f6bc05..c64d864799cd 100644 --- a/drivers/net/wireless/iwlwifi/mvm/d3.c +++ b/drivers/net/wireless/iwlwifi/mvm/d3.c @@ -490,7 +490,7 @@ static int iwl_mvm_d3_reprogram(struct iwl_mvm *mvm, struct ieee80211_vif *vif, return -EIO; } - ret = iwl_mvm_sta_add_to_fw(mvm, ap_sta); + ret = iwl_mvm_sta_send_to_fw(mvm, ap_sta, false); if (ret) return ret; rcu_assign_pointer(mvm->fw_id_to_mac_id[mvmvif->ap_sta_id], ap_sta); diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c index 6bfcb3b5bfa6..5bdcbcfee0c5 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c @@ -926,8 +926,10 @@ static int iwl_mvm_mac_sta_state(struct ieee80211_hw *hw, ret = 0; } else if (old_state == IEEE80211_STA_AUTH && new_state == IEEE80211_STA_ASSOC) { - iwl_mvm_rs_rate_init(mvm, sta, mvmvif->phy_ctxt->channel->band); - ret = 0; + ret = iwl_mvm_update_sta(mvm, vif, sta); + if (ret == 0) + iwl_mvm_rs_rate_init(mvm, sta, + mvmvif->phy_ctxt->channel->band); } else if (old_state == IEEE80211_STA_ASSOC && new_state == IEEE80211_STA_AUTHORIZED) { ret = 0; diff --git a/drivers/net/wireless/iwlwifi/mvm/sta.c b/drivers/net/wireless/iwlwifi/mvm/sta.c index 6b22bacdc1df..a1eb692d7fad 100644 --- a/drivers/net/wireless/iwlwifi/mvm/sta.c +++ b/drivers/net/wireless/iwlwifi/mvm/sta.c @@ -81,8 +81,9 @@ static int iwl_mvm_find_free_sta_id(struct iwl_mvm *mvm) return IWL_MVM_STATION_COUNT; } -/* add a NEW station to fw */ -int iwl_mvm_sta_add_to_fw(struct iwl_mvm *mvm, struct ieee80211_sta *sta) +/* send station add/update command to firmware */ +int iwl_mvm_sta_send_to_fw(struct iwl_mvm *mvm, struct ieee80211_sta *sta, + bool update) { struct iwl_mvm_sta *mvm_sta = (void *)sta->drv_priv; struct iwl_mvm_add_sta_cmd add_sta_cmd; @@ -94,8 +95,11 @@ int iwl_mvm_sta_add_to_fw(struct iwl_mvm *mvm, struct ieee80211_sta *sta) add_sta_cmd.sta_id = mvm_sta->sta_id; add_sta_cmd.mac_id_n_color = cpu_to_le32(mvm_sta->mac_id_n_color); - add_sta_cmd.tfd_queue_msk = cpu_to_le32(mvm_sta->tfd_queue_msk); - memcpy(&add_sta_cmd.addr, sta->addr, ETH_ALEN); + if (!update) { + add_sta_cmd.tfd_queue_msk = cpu_to_le32(mvm_sta->tfd_queue_msk); + memcpy(&add_sta_cmd.addr, sta->addr, ETH_ALEN); + } + add_sta_cmd.add_modify = update ? 1 : 0; /* STA_FLG_FAT_EN_MSK ? */ /* STA_FLG_MIMO_EN_MSK ? */ @@ -181,7 +185,7 @@ int iwl_mvm_add_sta(struct iwl_mvm *mvm, /* for HW restart - need to reset the seq_number etc... */ memset(mvm_sta->tid_data, 0, sizeof(mvm_sta->tid_data)); - ret = iwl_mvm_sta_add_to_fw(mvm, sta); + ret = iwl_mvm_sta_send_to_fw(mvm, sta, false); if (ret) return ret; @@ -195,6 +199,13 @@ int iwl_mvm_add_sta(struct iwl_mvm *mvm, return 0; } +int iwl_mvm_update_sta(struct iwl_mvm *mvm, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta) +{ + return iwl_mvm_sta_send_to_fw(mvm, sta, true); +} + int iwl_mvm_drain_sta(struct iwl_mvm *mvm, struct iwl_mvm_sta *mvmsta, bool drain) { diff --git a/drivers/net/wireless/iwlwifi/mvm/sta.h b/drivers/net/wireless/iwlwifi/mvm/sta.h index 1bf301097984..bdd7c5ed8222 100644 --- a/drivers/net/wireless/iwlwifi/mvm/sta.h +++ b/drivers/net/wireless/iwlwifi/mvm/sta.h @@ -309,10 +309,14 @@ struct iwl_mvm_int_sta { u32 tfd_queue_msk; }; -int iwl_mvm_sta_add_to_fw(struct iwl_mvm *mvm, struct ieee80211_sta *sta); +int iwl_mvm_sta_send_to_fw(struct iwl_mvm *mvm, struct ieee80211_sta *sta, + bool update); int iwl_mvm_add_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif, struct ieee80211_sta *sta); +int iwl_mvm_update_sta(struct iwl_mvm *mvm, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta); int iwl_mvm_rm_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif, struct ieee80211_sta *sta); From 36eed56a8f7e1bd7fb5014ea0e702708e1702f30 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Sun, 10 Feb 2013 13:25:25 +0200 Subject: [PATCH 158/209] iwlwifi: mvm: beautify code in rx_handlers Make the code more readable, and while at it also add a missing "break" to avoid checking handlers that cannot be used. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/mvm/ops.c | 37 ++++++++++++++------------ 1 file changed, 20 insertions(+), 17 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/mvm/ops.c b/drivers/net/wireless/iwlwifi/mvm/ops.c index 983dca3f888a..aa59adf87db3 100644 --- a/drivers/net/wireless/iwlwifi/mvm/ops.c +++ b/drivers/net/wireless/iwlwifi/mvm/ops.c @@ -536,25 +536,28 @@ static int iwl_mvm_rx_dispatch(struct iwl_op_mode *op_mode, for (i = 0; i < ARRAY_SIZE(iwl_mvm_rx_handlers); i++) { const struct iwl_rx_handlers *rx_h = &iwl_mvm_rx_handlers[i]; - if (rx_h->cmd_id == pkt->hdr.cmd) { - struct iwl_async_handler_entry *entry; - if (!rx_h->async) - return rx_h->fn(mvm, rxb, cmd); + struct iwl_async_handler_entry *entry; - entry = kzalloc(sizeof(*entry), GFP_ATOMIC); - /* we can't do much... */ - if (!entry) - return 0; + if (rx_h->cmd_id != pkt->hdr.cmd) + continue; - entry->rxb._page = rxb_steal_page(rxb); - entry->rxb._offset = rxb->_offset; - entry->rxb._rx_page_order = rxb->_rx_page_order; - entry->fn = rx_h->fn; - spin_lock(&mvm->async_handlers_lock); - list_add_tail(&entry->list, &mvm->async_handlers_list); - spin_unlock(&mvm->async_handlers_lock); - schedule_work(&mvm->async_handlers_wk); - } + if (!rx_h->async) + return rx_h->fn(mvm, rxb, cmd); + + entry = kzalloc(sizeof(*entry), GFP_ATOMIC); + /* we can't do much... */ + if (!entry) + return 0; + + entry->rxb._page = rxb_steal_page(rxb); + entry->rxb._offset = rxb->_offset; + entry->rxb._rx_page_order = rxb->_rx_page_order; + entry->fn = rx_h->fn; + spin_lock(&mvm->async_handlers_lock); + list_add_tail(&entry->list, &mvm->async_handlers_list); + spin_unlock(&mvm->async_handlers_lock); + schedule_work(&mvm->async_handlers_wk); + break; } return 0; From c88d0dc1cc0182358ce1ae6f457dace34539eb12 Mon Sep 17 00:00:00 2001 From: Catalin Iacob Date: Mon, 11 Feb 2013 22:18:05 +0100 Subject: [PATCH 159/209] rtlwifi: Initialize rate_init member of struct rate_control_ops This partially reverts commit 44ba973699b831414c3f8eef68ee5a7fe1208a05. rate_control_rate_init assumes the rate_init member of struct rate_control_ops is not NULL therefore not initializing it leads to an oops as soon the driver succesfully associates to an AP. The removal of rate_update from 44ba973699b831414c3f8eef68ee5a7fe1208a05 is ok because rate_update is checked for NULL before being called. Signed-off-by: Catalin Iacob Acked-by: Larry Finger Signed-off-by: John W. Linville --- drivers/net/wireless/rtlwifi/rc.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/net/wireless/rtlwifi/rc.c b/drivers/net/wireless/rtlwifi/rc.c index 204f46c4510d..6ad8bb758961 100644 --- a/drivers/net/wireless/rtlwifi/rc.c +++ b/drivers/net/wireless/rtlwifi/rc.c @@ -217,6 +217,12 @@ static void rtl_tx_status(void *ppriv, } } +static void rtl_rate_init(void *ppriv, + struct ieee80211_supported_band *sband, + struct ieee80211_sta *sta, void *priv_sta) +{ +} + static void *rtl_rate_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir) { @@ -261,6 +267,7 @@ static struct rate_control_ops rtl_rate_ops = { .free = rtl_rate_free, .alloc_sta = rtl_rate_alloc_sta, .free_sta = rtl_rate_free_sta, + .rate_init = rtl_rate_init, .tx_status = rtl_tx_status, .get_rate = rtl_get_rate, }; From bb92d19983a4b54be3e3b83441a8076d92cd04bc Mon Sep 17 00:00:00 2001 From: Amitkumar Karwar Date: Tue, 12 Feb 2013 12:16:26 -0800 Subject: [PATCH 160/209] nl80211: add packet offset information for wowlan pattern If user knows the location of a wowlan pattern to be matched in Rx packet, he can provide an offset with the pattern. This will help drivers to ignore initial bytes and match the pattern efficiently. Signed-off-by: Amitkumar Karwar Signed-off-by: Bing Zhao [refactor pattern sending] Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 4 ++ include/uapi/linux/nl80211.h | 12 ++++-- net/wireless/nl80211.c | 74 +++++++++++++++++++++++------------- 3 files changed, 60 insertions(+), 30 deletions(-) diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 77686ca28948..d3a73818e44c 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1576,6 +1576,7 @@ struct cfg80211_pmksa { * one bit per byte, in same format as nl80211 * @pattern: bytes to match where bitmask is 1 * @pattern_len: length of pattern (in bytes) + * @pkt_offset: packet offset (in bytes) * * Internal note: @mask and @pattern are allocated in one chunk of * memory, free @mask only! @@ -1583,6 +1584,7 @@ struct cfg80211_pmksa { struct cfg80211_wowlan_trig_pkt_pattern { u8 *mask, *pattern; int pattern_len; + int pkt_offset; }; /** @@ -2290,12 +2292,14 @@ enum wiphy_wowlan_support_flags { * (see nl80211.h for the pattern definition) * @pattern_max_len: maximum length of each pattern * @pattern_min_len: minimum length of each pattern + * @max_pkt_offset: maximum Rx packet offset */ struct wiphy_wowlan_support { u32 flags; int n_patterns; int pattern_max_len; int pattern_min_len; + int max_pkt_offset; }; /** diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index b23321154e8b..eb7b32247ec5 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -2910,6 +2910,8 @@ enum nl80211_tx_power_setting { * Note that the pattern matching is done as though frames were not * 802.11 frames but 802.3 frames, i.e. the frame is fully unpacked * first (including SNAP header unpacking) and then matched. + * @NL80211_WOWLAN_PKTPAT_OFFSET: packet offset, pattern is matched after + * these fixed number of bytes of received packet * @NUM_NL80211_WOWLAN_PKTPAT: number of attributes * @MAX_NL80211_WOWLAN_PKTPAT: max attribute number */ @@ -2917,6 +2919,7 @@ enum nl80211_wowlan_packet_pattern_attr { __NL80211_WOWLAN_PKTPAT_INVALID, NL80211_WOWLAN_PKTPAT_MASK, NL80211_WOWLAN_PKTPAT_PATTERN, + NL80211_WOWLAN_PKTPAT_OFFSET, NUM_NL80211_WOWLAN_PKTPAT, MAX_NL80211_WOWLAN_PKTPAT = NUM_NL80211_WOWLAN_PKTPAT - 1, @@ -2927,6 +2930,7 @@ enum nl80211_wowlan_packet_pattern_attr { * @max_patterns: maximum number of patterns supported * @min_pattern_len: minimum length of each pattern * @max_pattern_len: maximum length of each pattern + * @max_pkt_offset: maximum Rx packet offset * * This struct is carried in %NL80211_WOWLAN_TRIG_PKT_PATTERN when * that is part of %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED in the @@ -2936,6 +2940,7 @@ struct nl80211_wowlan_pattern_support { __u32 max_patterns; __u32 min_pattern_len; __u32 max_pattern_len; + __u32 max_pkt_offset; } __attribute__((packed)); /** @@ -2951,9 +2956,10 @@ struct nl80211_wowlan_pattern_support { * @NL80211_WOWLAN_TRIG_PKT_PATTERN: wake up on the specified packet patterns * which are passed in an array of nested attributes, each nested attribute * defining a with attributes from &struct nl80211_wowlan_trig_pkt_pattern. - * Each pattern defines a wakeup packet. The matching is done on the MSDU, - * i.e. as though the packet was an 802.3 packet, so the pattern matching - * is done after the packet is converted to the MSDU. + * Each pattern defines a wakeup packet. Packet offset is associated with + * each pattern which is used while matching the pattern. The matching is + * done on the MSDU, i.e. as though the packet was an 802.3 packet, so the + * pattern matching is done after the packet is converted to the MSDU. * * In %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, it is a binary attribute * carrying a &struct nl80211_wowlan_pattern_support. diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 93bc63eae076..cc0fad30b8c9 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -1238,6 +1238,8 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 portid, u32 seq, int flag dev->wiphy.wowlan.pattern_min_len, .max_pattern_len = dev->wiphy.wowlan.pattern_max_len, + .max_pkt_offset = + dev->wiphy.wowlan.max_pkt_offset, }; if (nla_put(msg, NL80211_WOWLAN_TRIG_PKT_PATTERN, sizeof(pat), &pat)) @@ -6895,6 +6897,39 @@ static int nl80211_leave_mesh(struct sk_buff *skb, struct genl_info *info) } #ifdef CONFIG_PM +static int nl80211_send_wowlan_patterns(struct sk_buff *msg, + struct cfg80211_registered_device *rdev) +{ + struct nlattr *nl_pats, *nl_pat; + int i, pat_len; + + if (!rdev->wowlan->n_patterns) + return 0; + + nl_pats = nla_nest_start(msg, NL80211_WOWLAN_TRIG_PKT_PATTERN); + if (!nl_pats) + return -ENOBUFS; + + for (i = 0; i < rdev->wowlan->n_patterns; i++) { + nl_pat = nla_nest_start(msg, i + 1); + if (!nl_pat) + return -ENOBUFS; + pat_len = rdev->wowlan->patterns[i].pattern_len; + if (nla_put(msg, NL80211_WOWLAN_PKTPAT_MASK, + DIV_ROUND_UP(pat_len, 8), + rdev->wowlan->patterns[i].mask) || + nla_put(msg, NL80211_WOWLAN_PKTPAT_PATTERN, + pat_len, rdev->wowlan->patterns[i].pattern) || + nla_put_u32(msg, NL80211_WOWLAN_PKTPAT_OFFSET, + rdev->wowlan->patterns[i].pkt_offset)) + return -ENOBUFS; + nla_nest_end(msg, nl_pat); + } + nla_nest_end(msg, nl_pats); + + return 0; +} + static int nl80211_get_wowlan(struct sk_buff *skb, struct genl_info *info) { struct cfg80211_registered_device *rdev = info->user_ptr[0]; @@ -6935,32 +6970,8 @@ static int nl80211_get_wowlan(struct sk_buff *skb, struct genl_info *info) (rdev->wowlan->rfkill_release && nla_put_flag(msg, NL80211_WOWLAN_TRIG_RFKILL_RELEASE))) goto nla_put_failure; - if (rdev->wowlan->n_patterns) { - struct nlattr *nl_pats, *nl_pat; - int i, pat_len; - - nl_pats = nla_nest_start(msg, - NL80211_WOWLAN_TRIG_PKT_PATTERN); - if (!nl_pats) - goto nla_put_failure; - - for (i = 0; i < rdev->wowlan->n_patterns; i++) { - nl_pat = nla_nest_start(msg, i + 1); - if (!nl_pat) - goto nla_put_failure; - pat_len = rdev->wowlan->patterns[i].pattern_len; - if (nla_put(msg, NL80211_WOWLAN_PKTPAT_MASK, - DIV_ROUND_UP(pat_len, 8), - rdev->wowlan->patterns[i].mask) || - nla_put(msg, NL80211_WOWLAN_PKTPAT_PATTERN, - pat_len, - rdev->wowlan->patterns[i].pattern)) - goto nla_put_failure; - nla_nest_end(msg, nl_pat); - } - nla_nest_end(msg, nl_pats); - } - + if (nl80211_send_wowlan_patterns(msg, rdev)) + goto nla_put_failure; nla_nest_end(msg, nl_wowlan); } @@ -7046,7 +7057,7 @@ static int nl80211_set_wowlan(struct sk_buff *skb, struct genl_info *info) if (tb[NL80211_WOWLAN_TRIG_PKT_PATTERN]) { struct nlattr *pat; int n_patterns = 0; - int rem, pat_len, mask_len; + int rem, pat_len, mask_len, pkt_offset; struct nlattr *pat_tb[NUM_NL80211_WOWLAN_PKTPAT]; nla_for_each_nested(pat, tb[NL80211_WOWLAN_TRIG_PKT_PATTERN], @@ -7081,6 +7092,15 @@ static int nl80211_set_wowlan(struct sk_buff *skb, struct genl_info *info) pat_len < wowlan->pattern_min_len) goto error; + if (!pat_tb[NL80211_WOWLAN_PKTPAT_OFFSET]) + pkt_offset = 0; + else + pkt_offset = nla_get_u32( + pat_tb[NL80211_WOWLAN_PKTPAT_OFFSET]); + if (pkt_offset > wowlan->max_pkt_offset) + goto error; + new_triggers.patterns[i].pkt_offset = pkt_offset; + new_triggers.patterns[i].mask = kmalloc(mask_len + pat_len, GFP_KERNEL); if (!new_triggers.patterns[i].mask) { From 6719429dd61cde1fe30d9644d0aa2369eefc9005 Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Tue, 12 Feb 2013 20:11:38 +0200 Subject: [PATCH 161/209] cfg80211: check vendor IE length to avoid overrun cfg80211_find_vendor_ie() was checking only that the vendor IE would fit in the remaining IEs buffer. If a corrupt includes a vendor IE that is too small, we could potentially overrun the IEs buffer. Fix this by checking that the vendor IE fits in the reported IE length field and skip it otherwise. Reported-by: Jouni Malinen Signed-off-by: Luciano Coelho [change BUILD_BUG_ON to != 1 (from >= 2)] Signed-off-by: Johannes Berg --- net/wireless/scan.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/net/wireless/scan.c b/net/wireless/scan.c index b7a167984986..d0fc6da2d097 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -365,14 +365,18 @@ const u8 *cfg80211_find_vendor_ie(unsigned int oui, u8 oui_type, if (!pos) return NULL; - if (end - pos < sizeof(*ie)) - return NULL; - ie = (struct ieee80211_vendor_ie *)pos; + + /* make sure we can access ie->len */ + BUILD_BUG_ON(offsetof(struct ieee80211_vendor_ie, len) != 1); + + if (ie->len < sizeof(*ie)) + goto cont; + ie_oui = ie->oui[0] << 16 | ie->oui[1] << 8 | ie->oui[2]; if (ie_oui == oui && ie->oui_type == oui_type) return pos; - +cont: pos += 2 + ie->len; } return NULL; From a0497f9f57478c5a37c5628eb32833dd9729a821 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Wed, 13 Feb 2013 10:51:08 +0100 Subject: [PATCH 162/209] mac80211/minstrel_ht: add support for using CCK rates When MCS rates start to get bad in 2.4 GHz because of long range or strong interference, CCK rates can be a lot more robust. This patch adds a pseudo MCS group containing CCK rates (long preamble in the lower 4 slots, short preamble in the upper slots). Signed-off-by: Felix Fietkau [make minstrel_ht_get_stats static] Signed-off-by: Johannes Berg --- net/mac80211/rc80211_minstrel.c | 29 ++++ net/mac80211/rc80211_minstrel.h | 2 + net/mac80211/rc80211_minstrel_ht.c | 152 ++++++++++++++++++--- net/mac80211/rc80211_minstrel_ht.h | 5 +- net/mac80211/rc80211_minstrel_ht_debugfs.c | 109 +++++++++------ 5 files changed, 237 insertions(+), 60 deletions(-) diff --git a/net/mac80211/rc80211_minstrel.c b/net/mac80211/rc80211_minstrel.c index 8c5acdc06226..eea45a2c7c35 100644 --- a/net/mac80211/rc80211_minstrel.c +++ b/net/mac80211/rc80211_minstrel.c @@ -494,6 +494,33 @@ minstrel_free_sta(void *priv, struct ieee80211_sta *sta, void *priv_sta) kfree(mi); } +static void +minstrel_init_cck_rates(struct minstrel_priv *mp) +{ + static const int bitrates[4] = { 10, 20, 55, 110 }; + struct ieee80211_supported_band *sband; + int i, j; + + sband = mp->hw->wiphy->bands[IEEE80211_BAND_2GHZ]; + if (!sband) + return; + + for (i = 0, j = 0; i < sband->n_bitrates; i++) { + struct ieee80211_rate *rate = &sband->bitrates[i]; + + if (rate->flags & IEEE80211_RATE_ERP_G) + continue; + + for (j = 0; j < ARRAY_SIZE(bitrates); j++) { + if (rate->bitrate != bitrates[j]) + continue; + + mp->cck_rates[j] = i; + break; + } + } +} + static void * minstrel_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir) { @@ -539,6 +566,8 @@ minstrel_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir) S_IRUGO | S_IWUGO, debugfsdir, &mp->fixed_rate_idx); #endif + minstrel_init_cck_rates(mp); + return mp; } diff --git a/net/mac80211/rc80211_minstrel.h b/net/mac80211/rc80211_minstrel.h index 5d278eccaef0..5ecf757817f2 100644 --- a/net/mac80211/rc80211_minstrel.h +++ b/net/mac80211/rc80211_minstrel.h @@ -79,6 +79,8 @@ struct minstrel_priv { unsigned int lookaround_rate; unsigned int lookaround_rate_mrr; + u8 cck_rates[4]; + #ifdef CONFIG_MAC80211_DEBUGFS /* * enable fixed rate processing per RC diff --git a/net/mac80211/rc80211_minstrel_ht.c b/net/mac80211/rc80211_minstrel_ht.c index 5bb316aff21a..6e35dcd2aa2f 100644 --- a/net/mac80211/rc80211_minstrel_ht.c +++ b/net/mac80211/rc80211_minstrel_ht.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2010 Felix Fietkau + * Copyright (C) 2010-2013 Felix Fietkau * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -63,6 +63,30 @@ } \ } +#define CCK_DURATION(_bitrate, _short, _len) \ + (10 /* SIFS */ + \ + (_short ? 72 + 24 : 144 + 48 ) + \ + (8 * (_len + 4) * 10) / (_bitrate)) + +#define CCK_ACK_DURATION(_bitrate, _short) \ + (CCK_DURATION((_bitrate > 10 ? 20 : 10), false, 60) + \ + CCK_DURATION(_bitrate, _short, AVG_PKT_SIZE)) + +#define CCK_DURATION_LIST(_short) \ + CCK_ACK_DURATION(10, _short), \ + CCK_ACK_DURATION(20, _short), \ + CCK_ACK_DURATION(55, _short), \ + CCK_ACK_DURATION(110, _short) + +#define CCK_GROUP \ + [MINSTREL_MAX_STREAMS * MINSTREL_STREAM_GROUPS] = { \ + .streams = 0, \ + .duration = { \ + CCK_DURATION_LIST(false), \ + CCK_DURATION_LIST(true) \ + } \ + } + /* * To enable sufficiently targeted rate sampling, MCS rates are divided into * groups, based on the number of streams and flags (HT40, SGI) that they @@ -95,8 +119,13 @@ const struct mcs_group minstrel_mcs_groups[] = { #if MINSTREL_MAX_STREAMS >= 3 MCS_GROUP(3, 1, 1), #endif + + /* must be last */ + CCK_GROUP }; +#define MINSTREL_CCK_GROUP (ARRAY_SIZE(minstrel_mcs_groups) - 1) + static u8 sample_table[SAMPLE_COLUMNS][MCS_GROUP_RATES]; /* @@ -119,6 +148,29 @@ minstrel_ht_get_group_idx(struct ieee80211_tx_rate *rate) !!(rate->flags & IEEE80211_TX_RC_40_MHZ_WIDTH)); } +static struct minstrel_rate_stats * +minstrel_ht_get_stats(struct minstrel_priv *mp, struct minstrel_ht_sta *mi, + struct ieee80211_tx_rate *rate) +{ + int group, idx; + + if (rate->flags & IEEE80211_TX_RC_MCS) { + group = minstrel_ht_get_group_idx(rate); + idx = rate->idx % MCS_GROUP_RATES; + } else { + group = MINSTREL_CCK_GROUP; + + for (idx = 0; idx < ARRAY_SIZE(mp->cck_rates); idx++) + if (rate->idx == mp->cck_rates[idx]) + break; + + /* short preamble */ + if (!(mi->groups[group].supported & BIT(idx))) + idx += 4; + } + return &mi->groups[group].rates[idx]; +} + static inline struct minstrel_rate_stats * minstrel_get_ratestats(struct minstrel_ht_sta *mi, int index) { @@ -159,7 +211,7 @@ static void minstrel_ht_calc_tp(struct minstrel_ht_sta *mi, int group, int rate) { struct minstrel_rate_stats *mr; - unsigned int usecs; + unsigned int usecs = 0; mr = &mi->groups[group].rates[rate]; @@ -168,7 +220,9 @@ minstrel_ht_calc_tp(struct minstrel_ht_sta *mi, int group, int rate) return; } - usecs = mi->overhead / MINSTREL_TRUNC(mi->avg_ampdu_len); + if (group != MINSTREL_CCK_GROUP) + usecs = mi->overhead / MINSTREL_TRUNC(mi->avg_ampdu_len); + usecs += minstrel_mcs_groups[group].duration[rate]; mr->cur_tp = MINSTREL_TRUNC((1000000 / usecs) * mr->probability); } @@ -293,7 +347,7 @@ minstrel_ht_update_stats(struct minstrel_priv *mp, struct minstrel_ht_sta *mi) } static bool -minstrel_ht_txstat_valid(struct ieee80211_tx_rate *rate) +minstrel_ht_txstat_valid(struct minstrel_priv *mp, struct ieee80211_tx_rate *rate) { if (rate->idx < 0) return false; @@ -301,7 +355,13 @@ minstrel_ht_txstat_valid(struct ieee80211_tx_rate *rate) if (!rate->count) return false; - return !!(rate->flags & IEEE80211_TX_RC_MCS); + if (rate->flags & IEEE80211_TX_RC_MCS) + return true; + + return rate->idx == mp->cck_rates[0] || + rate->idx == mp->cck_rates[1] || + rate->idx == mp->cck_rates[2] || + rate->idx == mp->cck_rates[3]; } static void @@ -386,7 +446,6 @@ minstrel_ht_tx_status(void *priv, struct ieee80211_supported_band *sband, struct minstrel_rate_stats *rate, *rate2; struct minstrel_priv *mp = priv; bool last; - int group; int i; if (!msp->is_ht) @@ -415,13 +474,12 @@ minstrel_ht_tx_status(void *priv, struct ieee80211_supported_band *sband, if (info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE) mi->sample_packets += info->status.ampdu_len; - last = !minstrel_ht_txstat_valid(&ar[0]); + last = !minstrel_ht_txstat_valid(mp, &ar[0]); for (i = 0; !last; i++) { last = (i == IEEE80211_TX_MAX_RATES - 1) || - !minstrel_ht_txstat_valid(&ar[i + 1]); + !minstrel_ht_txstat_valid(mp, &ar[i + 1]); - group = minstrel_ht_get_group_idx(&ar[i]); - rate = &mi->groups[group].rates[ar[i].idx % 8]; + rate = minstrel_ht_get_stats(mp, mi, &ar[i]); if (last) rate->success += info->status.ampdu_ack_len; @@ -447,7 +505,8 @@ minstrel_ht_tx_status(void *priv, struct ieee80211_supported_band *sband, if (time_after(jiffies, mi->stats_update + (mp->update_interval / 2 * HZ) / 1000)) { minstrel_ht_update_stats(mp, mi); - if (!(info->flags & IEEE80211_TX_CTL_AMPDU)) + if (!(info->flags & IEEE80211_TX_CTL_AMPDU) && + mi->max_prob_rate / MCS_GROUP_RATES != MINSTREL_CCK_GROUP) minstrel_aggr_check(sta, skb); } } @@ -463,6 +522,7 @@ minstrel_calc_retransmit(struct minstrel_priv *mp, struct minstrel_ht_sta *mi, unsigned int ctime = 0; unsigned int t_slot = 9; /* FIXME */ unsigned int ampdu_len = MINSTREL_TRUNC(mi->avg_ampdu_len); + unsigned int overhead = 0, overhead_rtscts = 0; mr = minstrel_get_ratestats(mi, index); if (mr->probability < MINSTREL_FRAC(1, 10)) { @@ -484,9 +544,14 @@ minstrel_calc_retransmit(struct minstrel_priv *mp, struct minstrel_ht_sta *mi, ctime += (t_slot * cw) >> 1; cw = min((cw << 1) | 1, mp->cw_max); + if (index / MCS_GROUP_RATES != MINSTREL_CCK_GROUP) { + overhead = mi->overhead; + overhead_rtscts = mi->overhead_rtscts; + } + /* Total TX time for data and Contention after first 2 tries */ - tx_time = ctime + 2 * (mi->overhead + tx_time_data); - tx_time_rtscts = ctime + 2 * (mi->overhead_rtscts + tx_time_data); + tx_time = ctime + 2 * (overhead + tx_time_data); + tx_time_rtscts = ctime + 2 * (overhead_rtscts + tx_time_data); /* See how many more tries we can fit inside segment size */ do { @@ -495,8 +560,8 @@ minstrel_calc_retransmit(struct minstrel_priv *mp, struct minstrel_ht_sta *mi, cw = min((cw << 1) | 1, mp->cw_max); /* Total TX time after this try */ - tx_time += ctime + mi->overhead + tx_time_data; - tx_time_rtscts += ctime + mi->overhead_rtscts + tx_time_data; + tx_time += ctime + overhead + tx_time_data; + tx_time_rtscts += ctime + overhead_rtscts + tx_time_data; if (tx_time_rtscts < mp->segment_size) mr->retry_count_rtscts++; @@ -526,9 +591,16 @@ minstrel_ht_set_rate(struct minstrel_priv *mp, struct minstrel_ht_sta *mi, else rate->count = mr->retry_count; - rate->flags = IEEE80211_TX_RC_MCS | group->flags; + rate->flags = 0; if (rtscts) rate->flags |= IEEE80211_TX_RC_USE_RTS_CTS; + + if (index / MCS_GROUP_RATES == MINSTREL_CCK_GROUP) { + rate->idx = mp->cck_rates[index % ARRAY_SIZE(mp->cck_rates)]; + return; + } + + rate->flags |= IEEE80211_TX_RC_MCS | group->flags; rate->idx = index % MCS_GROUP_RATES + (group->streams - 1) * MCS_GROUP_RATES; } @@ -591,6 +663,22 @@ minstrel_get_sample_rate(struct minstrel_priv *mp, struct minstrel_ht_sta *mi) return sample_idx; } +static void +minstrel_ht_check_cck_shortpreamble(struct minstrel_priv *mp, + struct minstrel_ht_sta *mi, bool val) +{ + u8 supported = mi->groups[MINSTREL_CCK_GROUP].supported; + + if (!supported || !mi->cck_supported_short) + return; + + if (supported & (mi->cck_supported_short << (val * 4))) + return; + + supported ^= mi->cck_supported_short | (mi->cck_supported_short << 4); + mi->groups[MINSTREL_CCK_GROUP].supported = supported; +} + static void minstrel_ht_get_rate(void *priv, struct ieee80211_sta *sta, void *priv_sta, struct ieee80211_tx_rate_control *txrc) @@ -610,6 +698,7 @@ minstrel_ht_get_rate(void *priv, struct ieee80211_sta *sta, void *priv_sta, return mac80211_minstrel.get_rate(priv, sta, &msp->legacy, txrc); info->flags |= mi->tx_flags; + minstrel_ht_check_cck_shortpreamble(mp, mi, txrc->short_preamble); /* Don't use EAPOL frames for sampling on non-mrr hw */ if (mp->hw->max_rates == 1 && @@ -682,6 +771,30 @@ minstrel_ht_get_rate(void *priv, struct ieee80211_sta *sta, void *priv_sta, } } +static void +minstrel_ht_update_cck(struct minstrel_priv *mp, struct minstrel_ht_sta *mi, + struct ieee80211_supported_band *sband, + struct ieee80211_sta *sta) +{ + int i; + + if (sband->band != IEEE80211_BAND_2GHZ) + return; + + mi->cck_supported = 0; + mi->cck_supported_short = 0; + for (i = 0; i < 4; i++) { + if (!rate_supported(sta, sband->band, mp->cck_rates[i])) + continue; + + mi->cck_supported |= BIT(i); + if (sband->bitrates[i].flags & IEEE80211_RATE_SHORT_PREAMBLE) + mi->cck_supported_short |= BIT(i); + } + + mi->groups[MINSTREL_CCK_GROUP].supported = mi->cck_supported; +} + static void minstrel_ht_update_caps(void *priv, struct ieee80211_supported_band *sband, struct ieee80211_sta *sta, void *priv_sta) @@ -702,7 +815,7 @@ minstrel_ht_update_caps(void *priv, struct ieee80211_supported_band *sband, goto use_legacy; BUILD_BUG_ON(ARRAY_SIZE(minstrel_mcs_groups) != - MINSTREL_MAX_STREAMS * MINSTREL_STREAM_GROUPS); + MINSTREL_MAX_STREAMS * MINSTREL_STREAM_GROUPS + 1); msp->is_ht = true; memset(mi, 0, sizeof(*mi)); @@ -738,6 +851,11 @@ minstrel_ht_update_caps(void *priv, struct ieee80211_supported_band *sband, u16 req = 0; mi->groups[i].supported = 0; + if (i == MINSTREL_CCK_GROUP) { + minstrel_ht_update_cck(mp, mi, sband, sta); + continue; + } + if (minstrel_mcs_groups[i].flags & IEEE80211_TX_RC_SHORT_GI) { if (minstrel_mcs_groups[i].flags & IEEE80211_TX_RC_40_MHZ_WIDTH) req |= IEEE80211_HT_CAP_SGI_40; diff --git a/net/mac80211/rc80211_minstrel_ht.h b/net/mac80211/rc80211_minstrel_ht.h index 462d2b227ed5..302dbd52180d 100644 --- a/net/mac80211/rc80211_minstrel_ht.h +++ b/net/mac80211/rc80211_minstrel_ht.h @@ -107,8 +107,11 @@ struct minstrel_ht_sta { /* current MCS group to be sampled */ u8 sample_group; + u8 cck_supported; + u8 cck_supported_short; + /* MCS rate group info and statistics */ - struct minstrel_mcs_group_data groups[MINSTREL_MAX_STREAMS * MINSTREL_STREAM_GROUPS]; + struct minstrel_mcs_group_data groups[MINSTREL_MAX_STREAMS * MINSTREL_STREAM_GROUPS + 1]; }; struct minstrel_ht_sta_priv { diff --git a/net/mac80211/rc80211_minstrel_ht_debugfs.c b/net/mac80211/rc80211_minstrel_ht_debugfs.c index f2b7d26370f0..df44a5ad8270 100644 --- a/net/mac80211/rc80211_minstrel_ht_debugfs.c +++ b/net/mac80211/rc80211_minstrel_ht_debugfs.c @@ -15,13 +15,76 @@ #include "rc80211_minstrel.h" #include "rc80211_minstrel_ht.h" +static char * +minstrel_ht_stats_dump(struct minstrel_ht_sta *mi, int i, char *p) +{ + unsigned int max_mcs = MINSTREL_MAX_STREAMS * MINSTREL_STREAM_GROUPS; + const struct mcs_group *mg; + unsigned int j, tp, prob, eprob; + char htmode = '2'; + char gimode = 'L'; + + if (!mi->groups[i].supported) + return p; + + mg = &minstrel_mcs_groups[i]; + if (mg->flags & IEEE80211_TX_RC_40_MHZ_WIDTH) + htmode = '4'; + if (mg->flags & IEEE80211_TX_RC_SHORT_GI) + gimode = 'S'; + + for (j = 0; j < MCS_GROUP_RATES; j++) { + struct minstrel_rate_stats *mr = &mi->groups[i].rates[j]; + static const int bitrates[4] = { 10, 20, 55, 110 }; + int idx = i * MCS_GROUP_RATES + j; + + if (!(mi->groups[i].supported & BIT(j))) + continue; + + if (i == max_mcs) + p += sprintf(p, "CCK/%cP ", j < 4 ? 'L' : 'S'); + else + p += sprintf(p, "HT%c0/%cGI ", htmode, gimode); + + *(p++) = (idx == mi->max_tp_rate) ? 'T' : ' '; + *(p++) = (idx == mi->max_tp_rate2) ? 't' : ' '; + *(p++) = (idx == mi->max_prob_rate) ? 'P' : ' '; + + if (i == max_mcs) { + int r = bitrates[j % 4]; + p += sprintf(p, " %2u.%1uM", r / 10, r % 10); + } else { + p += sprintf(p, " MCS%-2u", (mg->streams - 1) * + MCS_GROUP_RATES + j); + } + + tp = mr->cur_tp / 10; + prob = MINSTREL_TRUNC(mr->cur_prob * 1000); + eprob = MINSTREL_TRUNC(mr->probability * 1000); + + p += sprintf(p, " %6u.%1u %6u.%1u %6u.%1u " + "%3u %3u(%3u) %8llu %8llu\n", + tp / 10, tp % 10, + eprob / 10, eprob % 10, + prob / 10, prob % 10, + mr->retry_count, + mr->last_success, + mr->last_attempts, + (unsigned long long)mr->succ_hist, + (unsigned long long)mr->att_hist); + } + + return p; +} + static int minstrel_ht_stats_open(struct inode *inode, struct file *file) { struct minstrel_ht_sta_priv *msp = inode->i_private; struct minstrel_ht_sta *mi = &msp->ht; struct minstrel_debugfs_info *ms; - unsigned int i, j, tp, prob, eprob; + unsigned int i; + unsigned int max_mcs = MINSTREL_MAX_STREAMS * MINSTREL_STREAM_GROUPS; char *p; int ret; @@ -40,49 +103,11 @@ minstrel_ht_stats_open(struct inode *inode, struct file *file) p = ms->buf; p += sprintf(p, "type rate throughput ewma prob this prob " "retry this succ/attempt success attempts\n"); - for (i = 0; i < MINSTREL_MAX_STREAMS * MINSTREL_STREAM_GROUPS; i++) { - char htmode = '2'; - char gimode = 'L'; - if (!mi->groups[i].supported) - continue; + p = minstrel_ht_stats_dump(mi, max_mcs, p); + for (i = 0; i < max_mcs; i++) + p = minstrel_ht_stats_dump(mi, i, p); - if (minstrel_mcs_groups[i].flags & IEEE80211_TX_RC_40_MHZ_WIDTH) - htmode = '4'; - if (minstrel_mcs_groups[i].flags & IEEE80211_TX_RC_SHORT_GI) - gimode = 'S'; - - for (j = 0; j < MCS_GROUP_RATES; j++) { - struct minstrel_rate_stats *mr = &mi->groups[i].rates[j]; - int idx = i * MCS_GROUP_RATES + j; - - if (!(mi->groups[i].supported & BIT(j))) - continue; - - p += sprintf(p, "HT%c0/%cGI ", htmode, gimode); - - *(p++) = (idx == mi->max_tp_rate) ? 'T' : ' '; - *(p++) = (idx == mi->max_tp_rate2) ? 't' : ' '; - *(p++) = (idx == mi->max_prob_rate) ? 'P' : ' '; - p += sprintf(p, " MCS%-2u", (minstrel_mcs_groups[i].streams - 1) * - MCS_GROUP_RATES + j); - - tp = mr->cur_tp / 10; - prob = MINSTREL_TRUNC(mr->cur_prob * 1000); - eprob = MINSTREL_TRUNC(mr->probability * 1000); - - p += sprintf(p, " %6u.%1u %6u.%1u %6u.%1u " - "%3u %3u(%3u) %8llu %8llu\n", - tp / 10, tp % 10, - eprob / 10, eprob % 10, - prob / 10, prob % 10, - mr->retry_count, - mr->last_success, - mr->last_attempts, - (unsigned long long)mr->succ_hist, - (unsigned long long)mr->att_hist); - } - } p += sprintf(p, "\nTotal packet count:: ideal %d " "lookaround %d\n", max(0, (int) mi->total_packets - (int) mi->sample_packets), From 2a0e047ed62f20664005881b8e7f9328f910316a Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 23 Jan 2013 22:57:40 +0100 Subject: [PATCH 163/209] cfg80211: configuration for WoWLAN over TCP Intel Wireless devices are able to make a TCP connection after suspending, sending some data and waking up when the connection receives wakeup data (or breaks). Add the WoWLAN configuration and feature advertising API for it. Acked-by: David S. Miller Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 55 ++++++- include/uapi/linux/nl80211.h | 125 +++++++++++++++ net/wireless/core.h | 3 + net/wireless/nl80211.c | 295 ++++++++++++++++++++++++++++++++++- 4 files changed, 474 insertions(+), 4 deletions(-) diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index d3a73818e44c..7e6569e1f16f 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -19,6 +19,7 @@ #include #include #include +#include #include /** @@ -1587,6 +1588,41 @@ struct cfg80211_wowlan_trig_pkt_pattern { int pkt_offset; }; +/** + * struct cfg80211_wowlan_tcp - TCP connection parameters + * + * @sock: (internal) socket for source port allocation + * @src: source IP address + * @dst: destination IP address + * @dst_mac: destination MAC address + * @src_port: source port + * @dst_port: destination port + * @payload_len: data payload length + * @payload: data payload buffer + * @payload_seq: payload sequence stamping configuration + * @data_interval: interval at which to send data packets + * @wake_len: wakeup payload match length + * @wake_data: wakeup payload match data + * @wake_mask: wakeup payload match mask + * @tokens_size: length of the tokens buffer + * @payload_tok: payload token usage configuration + */ +struct cfg80211_wowlan_tcp { + struct socket *sock; + __be32 src, dst; + u16 src_port, dst_port; + u8 dst_mac[ETH_ALEN]; + int payload_len; + const u8 *payload; + struct nl80211_wowlan_tcp_data_seq payload_seq; + u32 data_interval; + u32 wake_len; + const u8 *wake_data, *wake_mask; + u32 tokens_size; + /* must be last, variable member */ + struct nl80211_wowlan_tcp_data_token payload_tok; +}; + /** * struct cfg80211_wowlan - Wake on Wireless-LAN support info * @@ -1601,12 +1637,15 @@ struct cfg80211_wowlan_trig_pkt_pattern { * @eap_identity_req: wake up on EAP identity request packet * @four_way_handshake: wake up on 4-way handshake * @rfkill_release: wake up when rfkill is released + * @tcp: TCP connection establishment/wakeup parameters, see nl80211.h. + * NULL if not configured. */ struct cfg80211_wowlan { bool any, disconnect, magic_pkt, gtk_rekey_failure, eap_identity_req, four_way_handshake, rfkill_release; struct cfg80211_wowlan_trig_pkt_pattern *patterns; + struct cfg80211_wowlan_tcp *tcp; int n_patterns; }; @@ -1626,11 +1665,15 @@ struct cfg80211_wowlan { * frame triggers an 802.3 frame should be reported, for * disconnect due to deauth 802.11 frame. This indicates which * it is. + * @tcp_match: TCP wakeup packet received + * @tcp_connlost: TCP connection lost or failed to establish + * @tcp_nomoretokens: TCP data ran out of tokens */ struct cfg80211_wowlan_wakeup { bool disconnect, magic_pkt, gtk_rekey_failure, eap_identity_req, four_way_handshake, - rfkill_release, packet_80211; + rfkill_release, packet_80211, + tcp_match, tcp_connlost, tcp_nomoretokens; s32 pattern_idx; u32 packet_present_len, packet_len; const void *packet; @@ -2285,6 +2328,14 @@ enum wiphy_wowlan_support_flags { WIPHY_WOWLAN_RFKILL_RELEASE = BIT(7), }; +struct wiphy_wowlan_tcp_support { + const struct nl80211_wowlan_tcp_data_token_feature *tok; + u32 data_payload_max; + u32 data_interval_max; + u32 wake_payload_max; + bool seq; +}; + /** * struct wiphy_wowlan_support - WoWLAN support data * @flags: see &enum wiphy_wowlan_support_flags @@ -2293,6 +2344,7 @@ enum wiphy_wowlan_support_flags { * @pattern_max_len: maximum length of each pattern * @pattern_min_len: minimum length of each pattern * @max_pkt_offset: maximum Rx packet offset + * @tcp: TCP wakeup support information */ struct wiphy_wowlan_support { u32 flags; @@ -2300,6 +2352,7 @@ struct wiphy_wowlan_support { int pattern_max_len; int pattern_min_len; int max_pkt_offset; + const struct wiphy_wowlan_tcp_support *tcp; }; /** diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index eb7b32247ec5..5309b34930ea 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -2991,6 +2991,17 @@ struct nl80211_wowlan_pattern_support { * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN: Original length of the 802.3 * packet, may be bigger than the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023 * attribute if the packet was truncated somewhere. + * @NL80211_WOWLAN_TRIG_TCP_CONNECTION: TCP connection wake, see DOC section + * "TCP connection wakeup" for more details. This is a nested attribute + * containing the exact information for establishing and keeping alive + * the TCP connection. + * @NL80211_WOWLAN_TRIG_TCP_WAKEUP_MATCH: For wakeup reporting only, the + * wakeup packet was received on the TCP connection + * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST: For wakeup reporting only, the + * TCP connection was lost or failed to be established + * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS: For wakeup reporting only, + * the TCP connection ran out of tokens to use for data to send to the + * service * @NUM_NL80211_WOWLAN_TRIG: number of wake on wireless triggers * @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number * @@ -3012,12 +3023,126 @@ enum nl80211_wowlan_triggers { NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN, NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023, NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN, + NL80211_WOWLAN_TRIG_TCP_CONNECTION, + NL80211_WOWLAN_TRIG_WAKEUP_TCP_MATCH, + NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST, + NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS, /* keep last */ NUM_NL80211_WOWLAN_TRIG, MAX_NL80211_WOWLAN_TRIG = NUM_NL80211_WOWLAN_TRIG - 1 }; +/** + * DOC: TCP connection wakeup + * + * Some devices can establish a TCP connection in order to be woken up by a + * packet coming in from outside their network segment, or behind NAT. If + * configured, the device will establish a TCP connection to the given + * service, and periodically send data to that service. The first data + * packet is usually transmitted after SYN/ACK, also ACKing the SYN/ACK. + * The data packets can optionally include a (little endian) sequence + * number (in the TCP payload!) that is generated by the device, and, also + * optionally, a token from a list of tokens. This serves as a keep-alive + * with the service, and for NATed connections, etc. + * + * During this keep-alive period, the server doesn't send any data to the + * client. When receiving data, it is compared against the wakeup pattern + * (and mask) and if it matches, the host is woken up. Similarly, if the + * connection breaks or cannot be established to start with, the host is + * also woken up. + * + * Developer's note: ARP offload is required for this, otherwise TCP + * response packets might not go through correctly. + */ + +/** + * struct nl80211_wowlan_tcp_data_seq - WoWLAN TCP data sequence + * @start: starting value + * @offset: offset of sequence number in packet + * @len: length of the sequence value to write, 1 through 4 + * + * Note: don't confuse with the TCP sequence number(s), this is for the + * keepalive packet payload. The actual value is written into the packet + * in little endian. + */ +struct nl80211_wowlan_tcp_data_seq { + __u32 start, offset, len; +}; + +/** + * struct nl80211_wowlan_tcp_data_token - WoWLAN TCP data token config + * @offset: offset of token in packet + * @len: length of each token + * @token_stream: stream of data to be used for the tokens, the length must + * be a multiple of @len for this to make sense + */ +struct nl80211_wowlan_tcp_data_token { + __u32 offset, len; + __u8 token_stream[]; +}; + +/** + * struct nl80211_wowlan_tcp_data_token_feature - data token features + * @min_len: minimum token length + * @max_len: maximum token length + * @bufsize: total available token buffer size (max size of @token_stream) + */ +struct nl80211_wowlan_tcp_data_token_feature { + __u32 min_len, max_len, bufsize; +}; + +/** + * enum nl80211_wowlan_tcp_attrs - WoWLAN TCP connection parameters + * @__NL80211_WOWLAN_TCP_INVALID: invalid number for nested attributes + * @NL80211_WOWLAN_TCP_SRC_IPV4: source IPv4 address (in network byte order) + * @NL80211_WOWLAN_TCP_DST_IPV4: destination IPv4 address + * (in network byte order) + * @NL80211_WOWLAN_TCP_DST_MAC: destination MAC address, this is given because + * route lookup when configured might be invalid by the time we suspend, + * and doing a route lookup when suspending is no longer possible as it + * might require ARP querying. + * @NL80211_WOWLAN_TCP_SRC_PORT: source port (u16); optional, if not given a + * socket and port will be allocated + * @NL80211_WOWLAN_TCP_DST_PORT: destination port (u16) + * @NL80211_WOWLAN_TCP_DATA_PAYLOAD: data packet payload, at least one byte. + * For feature advertising, a u32 attribute holding the maximum length + * of the data payload. + * @NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ: data packet sequence configuration + * (if desired), a &struct nl80211_wowlan_tcp_data_seq. For feature + * advertising it is just a flag + * @NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN: data packet token configuration, + * see &struct nl80211_wowlan_tcp_data_token and for advertising see + * &struct nl80211_wowlan_tcp_data_token_feature. + * @NL80211_WOWLAN_TCP_DATA_INTERVAL: data interval in seconds, maximum + * interval in feature advertising (u32) + * @NL80211_WOWLAN_TCP_WAKE_PAYLOAD: wake packet payload, for advertising a + * u32 attribute holding the maximum length + * @NL80211_WOWLAN_TCP_WAKE_MASK: Wake packet payload mask, not used for + * feature advertising. The mask works like @NL80211_WOWLAN_PKTPAT_MASK + * but on the TCP payload only. + * @NUM_NL80211_WOWLAN_TCP: number of TCP attributes + * @MAX_NL80211_WOWLAN_TCP: highest attribute number + */ +enum nl80211_wowlan_tcp_attrs { + __NL80211_WOWLAN_TCP_INVALID, + NL80211_WOWLAN_TCP_SRC_IPV4, + NL80211_WOWLAN_TCP_DST_IPV4, + NL80211_WOWLAN_TCP_DST_MAC, + NL80211_WOWLAN_TCP_SRC_PORT, + NL80211_WOWLAN_TCP_DST_PORT, + NL80211_WOWLAN_TCP_DATA_PAYLOAD, + NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ, + NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN, + NL80211_WOWLAN_TCP_DATA_INTERVAL, + NL80211_WOWLAN_TCP_WAKE_PAYLOAD, + NL80211_WOWLAN_TCP_WAKE_MASK, + + /* keep last */ + NUM_NL80211_WOWLAN_TCP, + MAX_NL80211_WOWLAN_TCP = NUM_NL80211_WOWLAN_TCP - 1 +}; + /** * enum nl80211_iface_limit_attrs - limit attributes * @NL80211_IFACE_LIMIT_UNSPEC: (reserved) diff --git a/net/wireless/core.h b/net/wireless/core.h index 37d70dc2fe82..949c9573d8d7 100644 --- a/net/wireless/core.h +++ b/net/wireless/core.h @@ -108,6 +108,9 @@ cfg80211_rdev_free_wowlan(struct cfg80211_registered_device *rdev) for (i = 0; i < rdev->wowlan->n_patterns; i++) kfree(rdev->wowlan->patterns[i].mask); kfree(rdev->wowlan->patterns); + if (rdev->wowlan->tcp && rdev->wowlan->tcp->sock) + sock_release(rdev->wowlan->tcp->sock); + kfree(rdev->wowlan->tcp); kfree(rdev->wowlan); } diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index cc0fad30b8c9..d29a461b4981 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -19,6 +19,7 @@ #include #include #include +#include #include "core.h" #include "nl80211.h" #include "reg.h" @@ -399,6 +400,26 @@ nl80211_wowlan_policy[NUM_NL80211_WOWLAN_TRIG] = { [NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST] = { .type = NLA_FLAG }, [NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE] = { .type = NLA_FLAG }, [NL80211_WOWLAN_TRIG_RFKILL_RELEASE] = { .type = NLA_FLAG }, + [NL80211_WOWLAN_TRIG_TCP_CONNECTION] = { .type = NLA_NESTED }, +}; + +static const struct nla_policy +nl80211_wowlan_tcp_policy[NUM_NL80211_WOWLAN_TCP] = { + [NL80211_WOWLAN_TCP_SRC_IPV4] = { .type = NLA_U32 }, + [NL80211_WOWLAN_TCP_DST_IPV4] = { .type = NLA_U32 }, + [NL80211_WOWLAN_TCP_DST_MAC] = { .len = ETH_ALEN }, + [NL80211_WOWLAN_TCP_SRC_PORT] = { .type = NLA_U16 }, + [NL80211_WOWLAN_TCP_DST_PORT] = { .type = NLA_U16 }, + [NL80211_WOWLAN_TCP_DATA_PAYLOAD] = { .len = 1 }, + [NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ] = { + .len = sizeof(struct nl80211_wowlan_tcp_data_seq) + }, + [NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN] = { + .len = sizeof(struct nl80211_wowlan_tcp_data_token) + }, + [NL80211_WOWLAN_TCP_DATA_INTERVAL] = { .type = NLA_U32 }, + [NL80211_WOWLAN_TCP_WAKE_PAYLOAD] = { .len = 1 }, + [NL80211_WOWLAN_TCP_WAKE_MASK] = { .len = 1 }, }; /* policy for GTK rekey offload attributes */ @@ -872,6 +893,48 @@ nla_put_failure: return -ENOBUFS; } +#ifdef CONFIG_PM +static int nl80211_send_wowlan_tcp_caps(struct cfg80211_registered_device *rdev, + struct sk_buff *msg) +{ + const struct wiphy_wowlan_tcp_support *tcp = rdev->wiphy.wowlan.tcp; + struct nlattr *nl_tcp; + + if (!tcp) + return 0; + + nl_tcp = nla_nest_start(msg, NL80211_WOWLAN_TRIG_TCP_CONNECTION); + if (!nl_tcp) + return -ENOBUFS; + + if (nla_put_u32(msg, NL80211_WOWLAN_TCP_DATA_PAYLOAD, + tcp->data_payload_max)) + return -ENOBUFS; + + if (nla_put_u32(msg, NL80211_WOWLAN_TCP_DATA_PAYLOAD, + tcp->data_payload_max)) + return -ENOBUFS; + + if (tcp->seq && nla_put_flag(msg, NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ)) + return -ENOBUFS; + + if (tcp->tok && nla_put(msg, NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN, + sizeof(*tcp->tok), tcp->tok)) + return -ENOBUFS; + + if (nla_put_u32(msg, NL80211_WOWLAN_TCP_DATA_INTERVAL, + tcp->data_interval_max)) + return -ENOBUFS; + + if (nla_put_u32(msg, NL80211_WOWLAN_TCP_WAKE_PAYLOAD, + tcp->wake_payload_max)) + return -ENOBUFS; + + nla_nest_end(msg, nl_tcp); + return 0; +} +#endif + static int nl80211_send_wiphy(struct sk_buff *msg, u32 portid, u32 seq, int flags, struct cfg80211_registered_device *dev) { @@ -1246,6 +1309,9 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 portid, u32 seq, int flag goto nla_put_failure; } + if (nl80211_send_wowlan_tcp_caps(dev, msg)) + goto nla_put_failure; + nla_nest_end(msg, nl_wowlan); } #endif @@ -6930,16 +6996,67 @@ static int nl80211_send_wowlan_patterns(struct sk_buff *msg, return 0; } +static int nl80211_send_wowlan_tcp(struct sk_buff *msg, + struct cfg80211_wowlan_tcp *tcp) +{ + struct nlattr *nl_tcp; + + if (!tcp) + return 0; + + nl_tcp = nla_nest_start(msg, NL80211_WOWLAN_TRIG_TCP_CONNECTION); + if (!nl_tcp) + return -ENOBUFS; + + if (nla_put_be32(msg, NL80211_WOWLAN_TCP_SRC_IPV4, tcp->src) || + nla_put_be32(msg, NL80211_WOWLAN_TCP_DST_IPV4, tcp->dst) || + nla_put(msg, NL80211_WOWLAN_TCP_DST_MAC, ETH_ALEN, tcp->dst_mac) || + nla_put_u16(msg, NL80211_WOWLAN_TCP_SRC_PORT, tcp->src_port) || + nla_put_u16(msg, NL80211_WOWLAN_TCP_DST_PORT, tcp->dst_port) || + nla_put(msg, NL80211_WOWLAN_TCP_DATA_PAYLOAD, + tcp->payload_len, tcp->payload) || + nla_put_u32(msg, NL80211_WOWLAN_TCP_DATA_INTERVAL, + tcp->data_interval) || + nla_put(msg, NL80211_WOWLAN_TCP_WAKE_PAYLOAD, + tcp->wake_len, tcp->wake_data) || + nla_put(msg, NL80211_WOWLAN_TCP_WAKE_MASK, + DIV_ROUND_UP(tcp->wake_len, 8), tcp->wake_mask)) + return -ENOBUFS; + + if (tcp->payload_seq.len && + nla_put(msg, NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ, + sizeof(tcp->payload_seq), &tcp->payload_seq)) + return -ENOBUFS; + + if (tcp->payload_tok.len && + nla_put(msg, NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN, + sizeof(tcp->payload_tok) + tcp->tokens_size, + &tcp->payload_tok)) + return -ENOBUFS; + + return 0; +} + static int nl80211_get_wowlan(struct sk_buff *skb, struct genl_info *info) { struct cfg80211_registered_device *rdev = info->user_ptr[0]; struct sk_buff *msg; void *hdr; + u32 size = NLMSG_DEFAULT_SIZE; - if (!rdev->wiphy.wowlan.flags && !rdev->wiphy.wowlan.n_patterns) + if (!rdev->wiphy.wowlan.flags && !rdev->wiphy.wowlan.n_patterns && + !rdev->wiphy.wowlan.tcp) return -EOPNOTSUPP; - msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL); + if (rdev->wowlan && rdev->wowlan->tcp) { + /* adjust size to have room for all the data */ + size += rdev->wowlan->tcp->tokens_size + + rdev->wowlan->tcp->payload_len + + rdev->wowlan->tcp->wake_len + + rdev->wowlan->tcp->wake_len / 8; + } + + msg = nlmsg_new(size, GFP_KERNEL); if (!msg) return -ENOMEM; @@ -6970,8 +7087,13 @@ static int nl80211_get_wowlan(struct sk_buff *skb, struct genl_info *info) (rdev->wowlan->rfkill_release && nla_put_flag(msg, NL80211_WOWLAN_TRIG_RFKILL_RELEASE))) goto nla_put_failure; + if (nl80211_send_wowlan_patterns(msg, rdev)) goto nla_put_failure; + + if (nl80211_send_wowlan_tcp(msg, rdev->wowlan->tcp)) + goto nla_put_failure; + nla_nest_end(msg, nl_wowlan); } @@ -6983,6 +7105,150 @@ nla_put_failure: return -ENOBUFS; } +static int nl80211_parse_wowlan_tcp(struct cfg80211_registered_device *rdev, + struct nlattr *attr, + struct cfg80211_wowlan *trig) +{ + struct nlattr *tb[NUM_NL80211_WOWLAN_TCP]; + struct cfg80211_wowlan_tcp *cfg; + struct nl80211_wowlan_tcp_data_token *tok = NULL; + struct nl80211_wowlan_tcp_data_seq *seq = NULL; + u32 size; + u32 data_size, wake_size, tokens_size = 0, wake_mask_size; + int err, port; + + if (!rdev->wiphy.wowlan.tcp) + return -EINVAL; + + err = nla_parse(tb, MAX_NL80211_WOWLAN_TCP, + nla_data(attr), nla_len(attr), + nl80211_wowlan_tcp_policy); + if (err) + return err; + + if (!tb[NL80211_WOWLAN_TCP_SRC_IPV4] || + !tb[NL80211_WOWLAN_TCP_DST_IPV4] || + !tb[NL80211_WOWLAN_TCP_DST_MAC] || + !tb[NL80211_WOWLAN_TCP_DST_PORT] || + !tb[NL80211_WOWLAN_TCP_DATA_PAYLOAD] || + !tb[NL80211_WOWLAN_TCP_DATA_INTERVAL] || + !tb[NL80211_WOWLAN_TCP_WAKE_PAYLOAD] || + !tb[NL80211_WOWLAN_TCP_WAKE_MASK]) + return -EINVAL; + + data_size = nla_len(tb[NL80211_WOWLAN_TCP_DATA_PAYLOAD]); + if (data_size > rdev->wiphy.wowlan.tcp->data_payload_max) + return -EINVAL; + + if (nla_get_u32(tb[NL80211_WOWLAN_TCP_DATA_INTERVAL]) > + rdev->wiphy.wowlan.tcp->data_interval_max) + return -EINVAL; + + wake_size = nla_len(tb[NL80211_WOWLAN_TCP_WAKE_PAYLOAD]); + if (wake_size > rdev->wiphy.wowlan.tcp->wake_payload_max) + return -EINVAL; + + wake_mask_size = nla_len(tb[NL80211_WOWLAN_TCP_WAKE_MASK]); + if (wake_mask_size != DIV_ROUND_UP(wake_size, 8)) + return -EINVAL; + + if (tb[NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN]) { + u32 tokln = nla_len(tb[NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN]); + + tok = nla_data(tb[NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN]); + tokens_size = tokln - sizeof(*tok); + + if (!tok->len || tokens_size % tok->len) + return -EINVAL; + if (!rdev->wiphy.wowlan.tcp->tok) + return -EINVAL; + if (tok->len > rdev->wiphy.wowlan.tcp->tok->max_len) + return -EINVAL; + if (tok->len < rdev->wiphy.wowlan.tcp->tok->min_len) + return -EINVAL; + if (tokens_size > rdev->wiphy.wowlan.tcp->tok->bufsize) + return -EINVAL; + if (tok->offset + tok->len > data_size) + return -EINVAL; + } + + if (tb[NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ]) { + seq = nla_data(tb[NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ]); + if (!rdev->wiphy.wowlan.tcp->seq) + return -EINVAL; + if (seq->len == 0 || seq->len > 4) + return -EINVAL; + if (seq->len + seq->offset > data_size) + return -EINVAL; + } + + size = sizeof(*cfg); + size += data_size; + size += wake_size + wake_mask_size; + size += tokens_size; + + cfg = kzalloc(size, GFP_KERNEL); + if (!cfg) + return -ENOMEM; + cfg->src = nla_get_be32(tb[NL80211_WOWLAN_TCP_SRC_IPV4]); + cfg->dst = nla_get_be32(tb[NL80211_WOWLAN_TCP_DST_IPV4]); + memcpy(cfg->dst_mac, nla_data(tb[NL80211_WOWLAN_TCP_DST_MAC]), + ETH_ALEN); + if (tb[NL80211_WOWLAN_TCP_SRC_PORT]) + port = nla_get_u16(tb[NL80211_WOWLAN_TCP_SRC_PORT]); + else + port = 0; +#ifdef CONFIG_INET + /* allocate a socket and port for it and use it */ + err = __sock_create(wiphy_net(&rdev->wiphy), PF_INET, SOCK_STREAM, + IPPROTO_TCP, &cfg->sock, 1); + if (err) { + kfree(cfg); + return err; + } + if (inet_csk_get_port(cfg->sock->sk, port)) { + sock_release(cfg->sock); + kfree(cfg); + return -EADDRINUSE; + } + cfg->src_port = inet_sk(cfg->sock->sk)->inet_num; +#else + if (!port) { + kfree(cfg); + return -EINVAL; + } + cfg->src_port = port; +#endif + + cfg->dst_port = nla_get_u16(tb[NL80211_WOWLAN_TCP_DST_PORT]); + cfg->payload_len = data_size; + cfg->payload = (u8 *)cfg + sizeof(*cfg) + tokens_size; + memcpy((void *)cfg->payload, + nla_data(tb[NL80211_WOWLAN_TCP_DATA_PAYLOAD]), + data_size); + if (seq) + cfg->payload_seq = *seq; + cfg->data_interval = nla_get_u32(tb[NL80211_WOWLAN_TCP_DATA_INTERVAL]); + cfg->wake_len = wake_size; + cfg->wake_data = (u8 *)cfg + sizeof(*cfg) + tokens_size + data_size; + memcpy((void *)cfg->wake_data, + nla_data(tb[NL80211_WOWLAN_TCP_WAKE_PAYLOAD]), + wake_size); + cfg->wake_mask = (u8 *)cfg + sizeof(*cfg) + tokens_size + + data_size + wake_size; + memcpy((void *)cfg->wake_mask, + nla_data(tb[NL80211_WOWLAN_TCP_WAKE_MASK]), + wake_mask_size); + if (tok) { + cfg->tokens_size = tokens_size; + memcpy(&cfg->payload_tok, tok, sizeof(*tok) + tokens_size); + } + + trig->tcp = cfg; + + return 0; +} + static int nl80211_set_wowlan(struct sk_buff *skb, struct genl_info *info) { struct cfg80211_registered_device *rdev = info->user_ptr[0]; @@ -6993,7 +7259,8 @@ static int nl80211_set_wowlan(struct sk_buff *skb, struct genl_info *info) int err, i; bool prev_enabled = rdev->wowlan; - if (!rdev->wiphy.wowlan.flags && !rdev->wiphy.wowlan.n_patterns) + if (!rdev->wiphy.wowlan.flags && !rdev->wiphy.wowlan.n_patterns && + !rdev->wiphy.wowlan.tcp) return -EOPNOTSUPP; if (!info->attrs[NL80211_ATTR_WOWLAN_TRIGGERS]) { @@ -7120,6 +7387,14 @@ static int nl80211_set_wowlan(struct sk_buff *skb, struct genl_info *info) } } + if (tb[NL80211_WOWLAN_TRIG_TCP_CONNECTION]) { + err = nl80211_parse_wowlan_tcp( + rdev, tb[NL80211_WOWLAN_TRIG_TCP_CONNECTION], + &new_triggers); + if (err) + goto error; + } + ntrig = kmemdup(&new_triggers, sizeof(new_triggers), GFP_KERNEL); if (!ntrig) { err = -ENOMEM; @@ -7137,6 +7412,9 @@ static int nl80211_set_wowlan(struct sk_buff *skb, struct genl_info *info) for (i = 0; i < new_triggers.n_patterns; i++) kfree(new_triggers.patterns[i].mask); kfree(new_triggers.patterns); + if (new_triggers.tcp && new_triggers.tcp->sock) + sock_release(new_triggers.tcp->sock); + kfree(new_triggers.tcp); return err; } #endif @@ -9418,6 +9696,17 @@ void cfg80211_report_wowlan_wakeup(struct wireless_dev *wdev, wakeup->pattern_idx)) goto free_msg; + if (wakeup->tcp_match) + nla_put_flag(msg, NL80211_WOWLAN_TRIG_WAKEUP_TCP_MATCH); + + if (wakeup->tcp_connlost) + nla_put_flag(msg, + NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST); + + if (wakeup->tcp_nomoretokens) + nla_put_flag(msg, + NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS); + if (wakeup->packet) { u32 pkt_attr = NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211; u32 len_attr = NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN; From 68eed6ee4c70fdf71cbacf9af43a861cd7a237fb Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 12 Feb 2013 15:23:14 +0300 Subject: [PATCH 164/209] brcmsmac: fix brcms_c_country_valid() ccode is not NUL terminated. Presumably insisting on a terminator makes brcms_c_country_valid() return false when it's not intended. ccode[2] is sprom->leddc_on_time. Signed-off-by: Dan Carpenter Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmsmac/channel.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmsmac/channel.c b/drivers/net/wireless/brcm80211/brcmsmac/channel.c index cdb62b8ccc79..10ee314c4229 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/channel.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/channel.c @@ -183,8 +183,7 @@ static bool brcms_c_country_valid(const char *ccode) * chars. */ if (!((0x80 & ccode[0]) == 0 && ccode[0] >= 0x41 && ccode[0] <= 0x5A && - (0x80 & ccode[1]) == 0 && ccode[1] >= 0x41 && ccode[1] <= 0x5A && - ccode[2] == '\0')) + (0x80 & ccode[1]) == 0 && ccode[1] >= 0x41 && ccode[1] <= 0x5A)) return false; /* From 06e7cda3ce30dadc3454539127b4cfc3888c349e Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Tue, 12 Feb 2013 16:09:02 -0600 Subject: [PATCH 165/209] rtlwifi: Rework Kconfig As the number of drivers in the rtlwifi family has grown, the Kconfig section for them has grown unwieldy. This change has two effects: (1) Variable RTLWIFI_DEBUG is documented, and (2) the entries for the drivers that depend on RTLWIFI are indented. Signed-off-by: Larry Finger Signed-off-by: John W. Linville --- drivers/net/wireless/rtlwifi/Kconfig | 50 ++++++++++++++-------------- 1 file changed, 25 insertions(+), 25 deletions(-) diff --git a/drivers/net/wireless/rtlwifi/Kconfig b/drivers/net/wireless/rtlwifi/Kconfig index b80bc4612581..b6aa0c40658f 100644 --- a/drivers/net/wireless/rtlwifi/Kconfig +++ b/drivers/net/wireless/rtlwifi/Kconfig @@ -1,8 +1,26 @@ +config RTLWIFI + tristate "Realtek wireless card support" + depends on MAC80211 + select FW_LOADER + ---help--- + This is common code for RTL8192CE/RTL8192CU/RTL8192SE/RTL8723AE + drivers. This module does nothing by itself - the various front-end + drivers need to be enabled to support any desired devices. + + If you choose to build as a module, it'll be called rtlwifi. + +config RTLWIFI_DEBUG + bool "Debugging output for rtlwifi driver family" + depends on RTLWIFI + default y + ---help--- + To use the module option that sets the dynamic-debugging level for, + the front-end driver, this parameter must be "Y". For memory-limited + systems, choose "N". If in doubt, choose "Y". + config RTL8192CE tristate "Realtek RTL8192CE/RTL8188CE Wireless Network Adapter" - depends on MAC80211 && PCI - select FW_LOADER - select RTLWIFI + depends on RTLWIFI && PCI select RTL8192C_COMMON ---help--- This is the driver for Realtek RTL8192CE/RTL8188CE 802.11n PCIe @@ -12,9 +30,7 @@ config RTL8192CE config RTL8192SE tristate "Realtek RTL8192SE/RTL8191SE PCIe Wireless Network Adapter" - depends on MAC80211 && PCI - select FW_LOADER - select RTLWIFI + depends on RTLWIFI && PCI ---help--- This is the driver for Realtek RTL8192SE/RTL8191SE 802.11n PCIe wireless network adapters. @@ -23,9 +39,7 @@ config RTL8192SE config RTL8192DE tristate "Realtek RTL8192DE/RTL8188DE PCIe Wireless Network Adapter" - depends on MAC80211 && PCI - select FW_LOADER - select RTLWIFI + depends on RTLWIFI && PCI ---help--- This is the driver for Realtek RTL8192DE/RTL8188DE 802.11n PCIe wireless network adapters. @@ -34,9 +48,7 @@ config RTL8192DE config RTL8723AE tristate "Realtek RTL8723AE PCIe Wireless Network Adapter" - depends on MAC80211 && PCI && EXPERIMENTAL - select FW_LOADER - select RTLWIFI + depends on RTLWIFI && PCI ---help--- This is the driver for Realtek RTL8723AE 802.11n PCIe wireless network adapters. @@ -45,9 +57,7 @@ config RTL8723AE config RTL8192CU tristate "Realtek RTL8192CU/RTL8188CU USB Wireless Network Adapter" - depends on MAC80211 && USB - select FW_LOADER - select RTLWIFI + depends on RTLWIFI && USB select RTL8192C_COMMON ---help--- This is the driver for Realtek RTL8192CU/RTL8188CU 802.11n USB @@ -55,16 +65,6 @@ config RTL8192CU If you choose to build it as a module, it will be called rtl8192cu -config RTLWIFI - tristate - depends on RTL8192CE || RTL8192CU || RTL8192SE || RTL8192DE || RTL8723AE - default m - -config RTLWIFI_DEBUG - bool "Additional debugging output" - depends on RTL8192CE || RTL8192CU || RTL8192SE || RTL8192DE || RTL8723AE - default y - config RTL8192C_COMMON tristate depends on RTL8192CE || RTL8192CU From 52301a815e81cdcbcf971ba28df0376dc7f3961c Mon Sep 17 00:00:00 2001 From: Avinash Patil Date: Tue, 12 Feb 2013 14:38:32 -0800 Subject: [PATCH 166/209] mwifiex: device specific sleep cookie handling for PCIe This patch adds support for handling of PCIe sleep cookie depending upon device properties. Some PCIe devices need sleep cookie probing before accessing HW while some others don't. A new sleep_cookie variable is defined as part of mwifiex_pcie_card_reg strcture and set/reset as per device capability. Sleep cookie is allocated/accessed/freed only when flag sleep_cookie for this particular device is enabled. Signed-off-by: Avinash Patil Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/pcie.c | 30 +++++++++++++++++++++-------- drivers/net/wireless/mwifiex/pcie.h | 3 +++ 2 files changed, 25 insertions(+), 8 deletions(-) diff --git a/drivers/net/wireless/mwifiex/pcie.c b/drivers/net/wireless/mwifiex/pcie.c index 3b9be7c185cb..492655c048d1 100644 --- a/drivers/net/wireless/mwifiex/pcie.c +++ b/drivers/net/wireless/mwifiex/pcie.c @@ -62,6 +62,10 @@ static bool mwifiex_pcie_ok_to_access_hw(struct mwifiex_adapter *adapter) { u32 *cookie_addr; struct pcie_service_card *card = adapter->card; + const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; + + if (!reg->sleep_cookie) + return true; if (card->sleep_cookie_vbase) { cookie_addr = (u32 *)card->sleep_cookie_vbase; @@ -299,8 +303,10 @@ static int mwifiex_read_reg(struct mwifiex_adapter *adapter, int reg, u32 *data) static int mwifiex_pm_wakeup_card(struct mwifiex_adapter *adapter) { int i = 0; + struct pcie_service_card *card = adapter->card; + const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; - while (mwifiex_pcie_ok_to_access_hw(adapter)) { + while (reg->sleep_cookie && mwifiex_pcie_ok_to_access_hw(adapter)) { i++; usleep_range(10, 20); /* 50ms max wait */ @@ -1513,8 +1519,8 @@ static int mwifiex_pcie_process_cmd_complete(struct mwifiex_adapter *adapter) if (adapter->ps_state == PS_STATE_SLEEP_CFM) { mwifiex_process_sleep_confirm_resp(adapter, skb->data, skb->len); - while (mwifiex_pcie_ok_to_access_hw(adapter) && - (count++ < 10)) + while (reg->sleep_cookie && (count++ < 10) && + mwifiex_pcie_ok_to_access_hw(adapter)) usleep_range(50, 60); } else { dev_err(adapter->dev, @@ -2172,6 +2178,7 @@ static int mwifiex_pcie_init(struct mwifiex_adapter *adapter) struct pcie_service_card *card = adapter->card; int ret; struct pci_dev *pdev = card->dev; + const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; pci_set_drvdata(pdev, card); @@ -2234,10 +2241,13 @@ static int mwifiex_pcie_init(struct mwifiex_adapter *adapter) ret = mwifiex_pcie_alloc_cmdrsp_buf(adapter); if (ret) goto err_alloc_cmdbuf; - ret = mwifiex_pcie_alloc_sleep_cookie_buf(adapter); - if (ret) - goto err_alloc_cookie; - + if (reg->sleep_cookie) { + ret = mwifiex_pcie_alloc_sleep_cookie_buf(adapter); + if (ret) + goto err_alloc_cookie; + } else { + card->sleep_cookie_vbase = NULL; + } return ret; err_alloc_cookie: @@ -2334,12 +2344,16 @@ static int mwifiex_register_dev(struct mwifiex_adapter *adapter) static void mwifiex_unregister_dev(struct mwifiex_adapter *adapter) { struct pcie_service_card *card = adapter->card; + const struct mwifiex_pcie_card_reg *reg; if (card) { dev_dbg(adapter->dev, "%s(): calling free_irq()\n", __func__); free_irq(card->dev->irq, card->dev); - mwifiex_pcie_delete_sleep_cookie_buf(adapter); + reg = card->pcie.reg; + if (reg->sleep_cookie) + mwifiex_pcie_delete_sleep_cookie_buf(adapter); + mwifiex_pcie_delete_cmdrsp_buf(adapter); mwifiex_pcie_delete_evtbd_ring(adapter); mwifiex_pcie_delete_rxbd_ring(adapter); diff --git a/drivers/net/wireless/mwifiex/pcie.h b/drivers/net/wireless/mwifiex/pcie.h index 608061578b37..d322ab8604ea 100644 --- a/drivers/net/wireless/mwifiex/pcie.h +++ b/drivers/net/wireless/mwifiex/pcie.h @@ -126,6 +126,7 @@ struct mwifiex_pcie_card_reg { u8 ring_flag_xs_eop; u32 ring_tx_start_ptr; u8 pfu_enabled; + u8 sleep_cookie; }; static const struct mwifiex_pcie_card_reg mwifiex_reg_8766 = { @@ -156,6 +157,7 @@ static const struct mwifiex_pcie_card_reg mwifiex_reg_8766 = { .ring_flag_xs_eop = 0, .ring_tx_start_ptr = 0, .pfu_enabled = 0, + .sleep_cookie = 1, }; static const struct mwifiex_pcie_card_reg mwifiex_reg_8897 = { @@ -186,6 +188,7 @@ static const struct mwifiex_pcie_card_reg mwifiex_reg_8897 = { .ring_flag_xs_eop = MWIFIEX_BD_FLAG_XS_EOP, .ring_tx_start_ptr = MWIFIEX_BD_FLAG_TX_START_PTR, .pfu_enabled = 1, + .sleep_cookie = 0, }; struct mwifiex_pcie_device { From 4ea545d476d3182056aeb042c439237ed61d261e Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Wed, 13 Feb 2013 14:27:05 +0100 Subject: [PATCH 167/209] rt2x00: check for dma mappings errors Check output of dma_map_single functions which nowadays can fail (when IOMMU is used). On write_beacon callbacks just print error, similar like padding error is handled by rt2800_write_beacon. Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2400pci.c | 12 ++++++++--- drivers/net/wireless/rt2x00/rt2500pci.c | 7 ++++-- drivers/net/wireless/rt2x00/rt2x00.h | 4 +++- drivers/net/wireless/rt2x00/rt2x00queue.c | 26 +++++++++++++++++------ 4 files changed, 36 insertions(+), 13 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c index a2d2bc2c7b3d..221beaaa83f1 100644 --- a/drivers/net/wireless/rt2x00/rt2400pci.c +++ b/drivers/net/wireless/rt2x00/rt2400pci.c @@ -1185,8 +1185,14 @@ static void rt2400pci_write_beacon(struct queue_entry *entry, rt2x00_set_field32(®, CSR14_BEACON_GEN, 0); rt2x00pci_register_write(rt2x00dev, CSR14, reg); - rt2x00queue_map_txskb(entry); - + if (rt2x00queue_map_txskb(entry)) { + ERROR(rt2x00dev, "Fail to map beacon, aborting\n"); + goto out; + } + /* + * Enable beaconing again. + */ + rt2x00_set_field32(®, CSR14_BEACON_GEN, 1); /* * Write the TX descriptor for the beacon. */ @@ -1196,7 +1202,7 @@ static void rt2400pci_write_beacon(struct queue_entry *entry, * Dump beacon to userspace through debugfs. */ rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry->skb); - +out: /* * Enable beaconing again. */ diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c index 9bea10f53f0a..39edc59e8d03 100644 --- a/drivers/net/wireless/rt2x00/rt2500pci.c +++ b/drivers/net/wireless/rt2x00/rt2500pci.c @@ -1338,7 +1338,10 @@ static void rt2500pci_write_beacon(struct queue_entry *entry, rt2x00_set_field32(®, CSR14_BEACON_GEN, 0); rt2x00pci_register_write(rt2x00dev, CSR14, reg); - rt2x00queue_map_txskb(entry); + if (rt2x00queue_map_txskb(entry)) { + ERROR(rt2x00dev, "Fail to map beacon, aborting\n"); + goto out; + } /* * Write the TX descriptor for the beacon. @@ -1349,7 +1352,7 @@ static void rt2500pci_write_beacon(struct queue_entry *entry, * Dump beacon to userspace through debugfs. */ rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry->skb); - +out: /* * Enable beaconing again. */ diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index 9a3f31a543ce..086abb403a4f 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -1169,8 +1169,10 @@ static inline bool rt2x00_is_soc(struct rt2x00_dev *rt2x00dev) /** * rt2x00queue_map_txskb - Map a skb into DMA for TX purposes. * @entry: Pointer to &struct queue_entry + * + * Returns -ENOMEM if mapping fail, 0 otherwise. */ -void rt2x00queue_map_txskb(struct queue_entry *entry); +int rt2x00queue_map_txskb(struct queue_entry *entry); /** * rt2x00queue_unmap_skb - Unmap a skb from DMA. diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c index f35d85a71bbc..e26ec9d817cf 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c @@ -87,24 +87,35 @@ struct sk_buff *rt2x00queue_alloc_rxskb(struct queue_entry *entry, gfp_t gfp) skbdesc->entry = entry; if (test_bit(REQUIRE_DMA, &rt2x00dev->cap_flags)) { - skbdesc->skb_dma = dma_map_single(rt2x00dev->dev, - skb->data, - skb->len, - DMA_FROM_DEVICE); + dma_addr_t skb_dma; + + skb_dma = dma_map_single(rt2x00dev->dev, skb->data, skb->len, + DMA_FROM_DEVICE); + if (unlikely(dma_mapping_error(rt2x00dev->dev, skb_dma))) { + dev_kfree_skb_any(skb); + return NULL; + } + + skbdesc->skb_dma = skb_dma; skbdesc->flags |= SKBDESC_DMA_MAPPED_RX; } return skb; } -void rt2x00queue_map_txskb(struct queue_entry *entry) +int rt2x00queue_map_txskb(struct queue_entry *entry) { struct device *dev = entry->queue->rt2x00dev->dev; struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); skbdesc->skb_dma = dma_map_single(dev, entry->skb->data, entry->skb->len, DMA_TO_DEVICE); + + if (unlikely(dma_mapping_error(dev, skbdesc->skb_dma))) + return -ENOMEM; + skbdesc->flags |= SKBDESC_DMA_MAPPED_TX; + return 0; } EXPORT_SYMBOL_GPL(rt2x00queue_map_txskb); @@ -545,8 +556,9 @@ static int rt2x00queue_write_tx_data(struct queue_entry *entry, /* * Map the skb to DMA. */ - if (test_bit(REQUIRE_DMA, &rt2x00dev->cap_flags)) - rt2x00queue_map_txskb(entry); + if (test_bit(REQUIRE_DMA, &rt2x00dev->cap_flags) && + rt2x00queue_map_txskb(entry)) + return -ENOMEM; return 0; } From bdb084b22d8aee66c87af5e9c36bd6cf7f3bccfd Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Wed, 13 Feb 2013 15:49:08 +0100 Subject: [PATCH 168/209] iwlegacy: more checks for dma mapping errors This patch check output of pci_map_single() calls. I missed them on my previous patch "iwlegacy: check for dma mapping errors", which fixed only pci_map_page() calls. To handle remaining possible dma mappings errors, we need to rearrange ilXXXX_tx_skb() and il_enqueue_hcmd() functions. Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville --- drivers/net/wireless/iwlegacy/3945-mac.c | 51 +++++++++++++----------- drivers/net/wireless/iwlegacy/4965-mac.c | 36 ++++++++++------- drivers/net/wireless/iwlegacy/common.c | 18 ++++++--- 3 files changed, 60 insertions(+), 45 deletions(-) diff --git a/drivers/net/wireless/iwlegacy/3945-mac.c b/drivers/net/wireless/iwlegacy/3945-mac.c index 83856d1a6101..3630a41df50d 100644 --- a/drivers/net/wireless/iwlegacy/3945-mac.c +++ b/drivers/net/wireless/iwlegacy/3945-mac.c @@ -572,26 +572,11 @@ il3945_tx_skb(struct il_priv *il, il3945_hw_build_tx_cmd_rate(il, out_cmd, info, hdr, sta_id); /* Total # bytes to be transmitted */ - len = (u16) skb->len; - tx_cmd->len = cpu_to_le16(len); + tx_cmd->len = cpu_to_le16((u16) skb->len); - il_update_stats(il, true, fc, len); tx_cmd->tx_flags &= ~TX_CMD_FLG_ANT_A_MSK; tx_cmd->tx_flags &= ~TX_CMD_FLG_ANT_B_MSK; - if (!ieee80211_has_morefrags(hdr->frame_control)) { - txq->need_update = 1; - } else { - wait_write_ptr = 1; - txq->need_update = 0; - } - - D_TX("sequence nr = 0X%x\n", le16_to_cpu(out_cmd->hdr.sequence)); - D_TX("tx_flags = 0X%x\n", le32_to_cpu(tx_cmd->tx_flags)); - il_print_hex_dump(il, IL_DL_TX, tx_cmd, sizeof(*tx_cmd)); - il_print_hex_dump(il, IL_DL_TX, (u8 *) tx_cmd->hdr, - ieee80211_hdrlen(fc)); - /* * Use the first empty entry in this queue's command buffer array * to contain the Tx command and MAC header concatenated together @@ -610,14 +595,8 @@ il3945_tx_skb(struct il_priv *il, * within command buffer array. */ txcmd_phys = pci_map_single(il->pci_dev, &out_cmd->hdr, len, PCI_DMA_TODEVICE); - /* we do not map meta data ... so we can safely access address to - * provide to unmap command*/ - dma_unmap_addr_set(out_meta, mapping, txcmd_phys); - dma_unmap_len_set(out_meta, len, len); - - /* Add buffer containing Tx command and MAC(!) header to TFD's - * first entry */ - il->ops->txq_attach_buf_to_tfd(il, txq, txcmd_phys, len, 1, 0); + if (unlikely(pci_dma_mapping_error(il->pci_dev, txcmd_phys))) + goto drop_unlock; /* Set up TFD's 2nd entry to point directly to remainder of skb, * if any (802.11 null frames have no payload). */ @@ -626,10 +605,34 @@ il3945_tx_skb(struct il_priv *il, phys_addr = pci_map_single(il->pci_dev, skb->data + hdr_len, len, PCI_DMA_TODEVICE); + if (unlikely(pci_dma_mapping_error(il->pci_dev, phys_addr))) + goto drop_unlock; + } + + /* Add buffer containing Tx command and MAC(!) header to TFD's + * first entry */ + il->ops->txq_attach_buf_to_tfd(il, txq, txcmd_phys, len, 1, 0); + dma_unmap_addr_set(out_meta, mapping, txcmd_phys); + dma_unmap_len_set(out_meta, len, len); + if (len) il->ops->txq_attach_buf_to_tfd(il, txq, phys_addr, len, 0, U32_PAD(len)); + + if (!ieee80211_has_morefrags(hdr->frame_control)) { + txq->need_update = 1; + } else { + wait_write_ptr = 1; + txq->need_update = 0; } + il_update_stats(il, true, fc, skb->len); + + D_TX("sequence nr = 0X%x\n", le16_to_cpu(out_cmd->hdr.sequence)); + D_TX("tx_flags = 0X%x\n", le32_to_cpu(tx_cmd->tx_flags)); + il_print_hex_dump(il, IL_DL_TX, tx_cmd, sizeof(*tx_cmd)); + il_print_hex_dump(il, IL_DL_TX, (u8 *) tx_cmd->hdr, + ieee80211_hdrlen(fc)); + /* Tell device the write idx *just past* this latest filled TFD */ q->write_ptr = il_queue_inc_wrap(q->write_ptr, q->n_bd); il_txq_update_write_ptr(il, txq); diff --git a/drivers/net/wireless/iwlegacy/4965-mac.c b/drivers/net/wireless/iwlegacy/4965-mac.c index 835662a449da..7941eb3a0166 100644 --- a/drivers/net/wireless/iwlegacy/4965-mac.c +++ b/drivers/net/wireless/iwlegacy/4965-mac.c @@ -1793,8 +1793,7 @@ il4965_tx_skb(struct il_priv *il, memcpy(tx_cmd->hdr, hdr, hdr_len); /* Total # bytes to be transmitted */ - len = (u16) skb->len; - tx_cmd->len = cpu_to_le16(len); + tx_cmd->len = cpu_to_le16((u16) skb->len); if (info->control.hw_key) il4965_tx_cmd_build_hwcrypto(il, info, tx_cmd, skb, sta_id); @@ -1804,7 +1803,6 @@ il4965_tx_skb(struct il_priv *il, il4965_tx_cmd_build_rate(il, tx_cmd, info, sta, fc); - il_update_stats(il, true, fc, len); /* * Use the first empty entry in this queue's command buffer array * to contain the Tx command and MAC header concatenated together @@ -1826,18 +1824,8 @@ il4965_tx_skb(struct il_priv *il, txcmd_phys = pci_map_single(il->pci_dev, &out_cmd->hdr, firstlen, PCI_DMA_BIDIRECTIONAL); - dma_unmap_addr_set(out_meta, mapping, txcmd_phys); - dma_unmap_len_set(out_meta, len, firstlen); - /* Add buffer containing Tx command and MAC(!) header to TFD's - * first entry */ - il->ops->txq_attach_buf_to_tfd(il, txq, txcmd_phys, firstlen, 1, 0); - - if (!ieee80211_has_morefrags(hdr->frame_control)) { - txq->need_update = 1; - } else { - wait_write_ptr = 1; - txq->need_update = 0; - } + if (unlikely(pci_dma_mapping_error(il->pci_dev, txcmd_phys))) + goto drop_unlock; /* Set up TFD's 2nd entry to point directly to remainder of skb, * if any (802.11 null frames have no payload). */ @@ -1846,8 +1834,24 @@ il4965_tx_skb(struct il_priv *il, phys_addr = pci_map_single(il->pci_dev, skb->data + hdr_len, secondlen, PCI_DMA_TODEVICE); + if (unlikely(pci_dma_mapping_error(il->pci_dev, phys_addr))) + goto drop_unlock; + } + + /* Add buffer containing Tx command and MAC(!) header to TFD's + * first entry */ + il->ops->txq_attach_buf_to_tfd(il, txq, txcmd_phys, firstlen, 1, 0); + dma_unmap_addr_set(out_meta, mapping, txcmd_phys); + dma_unmap_len_set(out_meta, len, firstlen); + if (secondlen) il->ops->txq_attach_buf_to_tfd(il, txq, phys_addr, secondlen, 0, 0); + + if (!ieee80211_has_morefrags(hdr->frame_control)) { + txq->need_update = 1; + } else { + wait_write_ptr = 1; + txq->need_update = 0; } scratch_phys = @@ -1860,6 +1864,8 @@ il4965_tx_skb(struct il_priv *il, tx_cmd->dram_lsb_ptr = cpu_to_le32(scratch_phys); tx_cmd->dram_msb_ptr = il_get_dma_hi_addr(scratch_phys); + il_update_stats(il, true, fc, skb->len); + D_TX("sequence nr = 0X%x\n", le16_to_cpu(out_cmd->hdr.sequence)); D_TX("tx_flags = 0X%x\n", le32_to_cpu(tx_cmd->tx_flags)); il_print_hex_dump(il, IL_DL_TX, (u8 *) tx_cmd, sizeof(*tx_cmd)); diff --git a/drivers/net/wireless/iwlegacy/common.c b/drivers/net/wireless/iwlegacy/common.c index 1f598604a79c..4ed2949f314d 100644 --- a/drivers/net/wireless/iwlegacy/common.c +++ b/drivers/net/wireless/iwlegacy/common.c @@ -3162,18 +3162,23 @@ il_enqueue_hcmd(struct il_priv *il, struct il_host_cmd *cmd) idx, il->cmd_queue); } #endif + + phys_addr = + pci_map_single(il->pci_dev, &out_cmd->hdr, fix_size, + PCI_DMA_BIDIRECTIONAL); + if (unlikely(pci_dma_mapping_error(il->pci_dev, phys_addr))) { + idx = -ENOMEM; + goto out; + } + dma_unmap_addr_set(out_meta, mapping, phys_addr); + dma_unmap_len_set(out_meta, len, fix_size); + txq->need_update = 1; if (il->ops->txq_update_byte_cnt_tbl) /* Set up entry in queue's byte count circular buffer */ il->ops->txq_update_byte_cnt_tbl(il, txq, 0); - phys_addr = - pci_map_single(il->pci_dev, &out_cmd->hdr, fix_size, - PCI_DMA_BIDIRECTIONAL); - dma_unmap_addr_set(out_meta, mapping, phys_addr); - dma_unmap_len_set(out_meta, len, fix_size); - il->ops->txq_attach_buf_to_tfd(il, txq, phys_addr, fix_size, 1, U32_PAD(cmd->len)); @@ -3181,6 +3186,7 @@ il_enqueue_hcmd(struct il_priv *il, struct il_host_cmd *cmd) q->write_ptr = il_queue_inc_wrap(q->write_ptr, q->n_bd); il_txq_update_write_ptr(il, txq); +out: spin_unlock_irqrestore(&il->hcmd_lock, flags); return idx; } From e81c7e93b8f047bd0fe2cd150b0866c9da4c201d Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 13 Feb 2013 17:33:20 -0800 Subject: [PATCH 169/209] brcmsmac: Downgrade d11hdrs_mac80211 error messages to warnings. These messages don't seem to be errors but notifications that some attribute isn't quite right. Don't mark them as errors. Signed-off-by: Joe Perches Signed-off-by: John W. Linville --- .../net/wireless/brcm80211/brcmsmac/main.c | 29 +++++++++---------- 1 file changed, 13 insertions(+), 16 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmsmac/main.c b/drivers/net/wireless/brcm80211/brcmsmac/main.c index e80825e39c6e..b3ea15ecd68c 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/main.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c @@ -6443,10 +6443,9 @@ brcms_c_d11hdrs_mac80211(struct brcms_c_info *wlc, struct ieee80211_hw *hw, if ((txrate[k]->flags & IEEE80211_TX_RC_MCS) && (!is_mcs_rate(rspec[k]))) { - brcms_err(wlc->hw->d11core, - "wl%d: %s: IEEE80211_TX_" - "RC_MCS != is_mcs_rate(rspec)\n", - wlc->pub->unit, __func__); + brcms_warn(wlc->hw->d11core, + "wl%d: %s: IEEE80211_TX_RC_MCS != is_mcs_rate(rspec)\n", + wlc->pub->unit, __func__); } if (is_mcs_rate(rspec[k])) { @@ -6838,21 +6837,19 @@ brcms_c_d11hdrs_mac80211(struct brcms_c_info *wlc, struct ieee80211_hw *hw, wlc->fragthresh[queue] = (u16) newfragthresh; } else { - brcms_err(wlc->hw->d11core, - "wl%d: %s txop invalid " - "for rate %d\n", - wlc->pub->unit, fifo_names[queue], - rspec2rate(rspec[0])); + brcms_warn(wlc->hw->d11core, + "wl%d: %s txop invalid for rate %d\n", + wlc->pub->unit, fifo_names[queue], + rspec2rate(rspec[0])); } if (dur > wlc->edcf_txop[ac]) - brcms_err(wlc->hw->d11core, - "wl%d: %s: %s txop " - "exceeded phylen %d/%d dur %d/%d\n", - wlc->pub->unit, __func__, - fifo_names[queue], - phylen, wlc->fragthresh[queue], - dur, wlc->edcf_txop[ac]); + brcms_warn(wlc->hw->d11core, + "wl%d: %s: %s txop exceeded phylen %d/%d dur %d/%d\n", + wlc->pub->unit, __func__, + fifo_names[queue], + phylen, wlc->fragthresh[queue], + dur, wlc->edcf_txop[ac]); } } From b56e681b6210a635af4e4eb93ce81b4654851033 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 13 Feb 2013 17:33:21 -0800 Subject: [PATCH 170/209] brcmsmac: Remove unnecessary memset casts Remove the casts of the first argument of memset. Neaten the style by using the sizeof the actual variable being memset not the sizeof the type of variable. Signed-off-by: Joe Perches Signed-off-by: John W. Linville --- .../net/wireless/brcm80211/brcmsmac/main.c | 23 ++++++++----------- 1 file changed, 10 insertions(+), 13 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmsmac/main.c b/drivers/net/wireless/brcm80211/brcmsmac/main.c index b3ea15ecd68c..8ef02dca8f8c 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/main.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c @@ -3138,8 +3138,7 @@ void brcms_c_reset(struct brcms_c_info *wlc) brcms_c_statsupd(wlc); /* reset our snapshot of macstat counters */ - memset((char *)wlc->core->macstat_snapshot, 0, - sizeof(struct macstat)); + memset(wlc->core->macstat_snapshot, 0, sizeof(struct macstat)); brcms_b_reset(wlc->hw); } @@ -4052,7 +4051,7 @@ void brcms_c_wme_setparams(struct brcms_c_info *wlc, u16 aci, return; } - memset((char *)&acp_shm, 0, sizeof(struct shm_acparams)); + memset(&acp_shm, 0, sizeof(struct shm_acparams)); /* fill in shm ac params struct */ acp_shm.txop = params->txop; /* convert from units of 32us to us for ucode */ @@ -4768,7 +4767,7 @@ static void brcms_c_bss_default_init(struct brcms_c_info *wlc) struct brcms_bss_info *bi = wlc->default_bss; /* init default and target BSS with some sane initial values */ - memset((char *)(bi), 0, sizeof(struct brcms_bss_info)); + memset(bi, 0, sizeof(*bi)); bi->beacon_period = BEACON_INTERVAL_DEFAULT; /* fill the default channel as the first valid channel @@ -5297,7 +5296,7 @@ int brcms_c_set_gmode(struct brcms_c_info *wlc, u8 gmode, bool config) brcms_c_protection_upd(wlc, BRCMS_PROT_G_USER, gmode); /* Clear rateset override */ - memset(&rs, 0, sizeof(struct brcms_c_rateset)); + memset(&rs, 0, sizeof(rs)); switch (gmode) { case GMODE_LEGACY_B: @@ -5520,7 +5519,7 @@ int brcms_c_set_rateset(struct brcms_c_info *wlc, struct brcm_rateset *rs) if (rs->count > BRCMS_NUMRATES) return -ENOBUFS; - memset(&internal_rs, 0, sizeof(struct brcms_c_rateset)); + memset(&internal_rs, 0, sizeof(internal_rs)); /* Copy only legacy rateset section */ internal_rs.count = rs->count; @@ -5623,7 +5622,7 @@ int brcms_c_module_unregister(struct brcms_pub *pub, const char *name, for (i = 0; i < BRCMS_MAXMODULES; i++) { if (!strcmp(wlc->modulecb[i].name, name) && (wlc->modulecb[i].hdl == hdl)) { - memset(&wlc->modulecb[i], 0, sizeof(struct modulecb)); + memset(&wlc->modulecb[i], 0, sizeof(wlc->modulecb[i])); return 0; } } @@ -6678,11 +6677,9 @@ brcms_c_d11hdrs_mac80211(struct brcms_c_info *wlc, struct ieee80211_hw *hw, (struct ofdm_phy_hdr *) rts_plcp) : rts_plcp[0]) << 8; } else { - memset((char *)txh->RTSPhyHeader, 0, D11_PHY_HDR_LEN); - memset((char *)&txh->rts_frame, 0, - sizeof(struct ieee80211_rts)); - memset((char *)txh->RTSPLCPFallback, 0, - sizeof(txh->RTSPLCPFallback)); + memset(txh->RTSPhyHeader, 0, D11_PHY_HDR_LEN); + memset(&txh->rts_frame, 0, sizeof(struct ieee80211_rts)); + memset(txh->RTSPLCPFallback, 0, sizeof(txh->RTSPLCPFallback)); txh->RTSDurFallback = 0; } @@ -7324,7 +7321,7 @@ brcms_c_bcn_prb_template(struct brcms_c_info *wlc, u16 type, *len = hdr_len + body_len; /* format PHY and MAC headers */ - memset((char *)buf, 0, hdr_len); + memset(buf, 0, hdr_len); plcp = (struct cck_phy_hdr *) buf; From 04f39047af2a6df64b763ea5a271db24879d0391 Mon Sep 17 00:00:00 2001 From: Simon Wunderlich Date: Fri, 8 Feb 2013 18:16:19 +0100 Subject: [PATCH 171/209] nl80211/cfg80211: add radar detection command/event Add new NL80211_CMD_RADAR_DETECT, which starts the Channel Availability Check (CAC). This command will also notify the usermode about events (CAC finished, CAC aborted, radar detected, NOP finished). Once radar detection has started it should continuously monitor for radars as long as the channel is active. This patch enables DFS for AP mode in nl80211/cfg80211. Based on original patch by Victor Goldenshtein Signed-off-by: Simon Wunderlich [remove WIPHY_FLAG_HAS_RADAR_DETECT again -- my mistake] Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 46 ++++++++++++ include/uapi/linux/nl80211.h | 61 ++++++++++++++++ net/wireless/chan.c | 129 ++++++++++++++++++++++++++++++++- net/wireless/core.c | 3 + net/wireless/core.h | 28 ++++++++ net/wireless/mlme.c | 120 +++++++++++++++++++++++++++++++ net/wireless/nl80211.c | 135 +++++++++++++++++++++++++++++++++-- net/wireless/nl80211.h | 7 ++ net/wireless/reg.c | 3 + net/wireless/scan.c | 10 --- net/wireless/trace.h | 45 ++++++++++++ 11 files changed, 570 insertions(+), 17 deletions(-) diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 7e6569e1f16f..ee11a3db730b 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -114,6 +114,9 @@ enum ieee80211_channel_flags { #define IEEE80211_CHAN_NO_HT40 \ (IEEE80211_CHAN_NO_HT40PLUS | IEEE80211_CHAN_NO_HT40MINUS) +#define IEEE80211_DFS_MIN_CAC_TIME_MS 60000 +#define IEEE80211_DFS_MIN_NOP_TIME_MS (30 * 60 * 1000) + /** * struct ieee80211_channel - channel definition * @@ -134,6 +137,9 @@ enum ieee80211_channel_flags { * to enable this, this is useful only on 5 GHz band. * @orig_mag: internal use * @orig_mpwr: internal use + * @dfs_state: current state of this channel. Only relevant if radar is required + * on this channel. + * @dfs_state_entered: timestamp (jiffies) when the dfs state was entered. */ struct ieee80211_channel { enum ieee80211_band band; @@ -146,6 +152,8 @@ struct ieee80211_channel { bool beacon_found; u32 orig_flags; int orig_mag, orig_mpwr; + enum nl80211_dfs_state dfs_state; + unsigned long dfs_state_entered; }; /** @@ -569,6 +577,7 @@ struct cfg80211_acl_data { * @p2p_opp_ps: P2P opportunistic PS * @acl: ACL configuration used by the drivers which has support for * MAC address based access control + * @radar_required: set if radar detection is required */ struct cfg80211_ap_settings { struct cfg80211_chan_def chandef; @@ -586,6 +595,7 @@ struct cfg80211_ap_settings { u8 p2p_ctwindow; bool p2p_opp_ps; const struct cfg80211_acl_data *acl; + bool radar_required; }; /** @@ -1909,6 +1919,8 @@ struct cfg80211_gtk_rekey_data { * this new list replaces the existing one. Driver has to clear its ACL * when number of MAC addresses entries is passed as 0. Drivers which * advertise the support for MAC based ACL have to implement this callback. + * + * @start_radar_detection: Start radar detection in the driver. */ struct cfg80211_ops { int (*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow); @@ -2132,6 +2144,10 @@ struct cfg80211_ops { int (*set_mac_acl)(struct wiphy *wiphy, struct net_device *dev, const struct cfg80211_acl_data *params); + + int (*start_radar_detection)(struct wiphy *wiphy, + struct net_device *dev, + struct cfg80211_chan_def *chandef); }; /* @@ -2715,6 +2731,8 @@ struct cfg80211_cached_keys; * beacons, 0 when not valid * @address: The address for this device, valid only if @netdev is %NULL * @p2p_started: true if this is a P2P Device that has been started + * @cac_started: true if DFS channel availability check has been started + * @cac_start_time: timestamp (jiffies) when the dfs state was entered. */ struct wireless_dev { struct wiphy *wiphy; @@ -2766,6 +2784,9 @@ struct wireless_dev { u32 ap_unexpected_nlportid; + bool cac_started; + unsigned long cac_start_time; + #ifdef CONFIG_CFG80211_WEXT /* wext data */ struct { @@ -3754,6 +3775,31 @@ void cfg80211_cqm_rssi_notify(struct net_device *dev, enum nl80211_cqm_rssi_threshold_event rssi_event, gfp_t gfp); +/** + * cfg80211_radar_event - radar detection event + * @wiphy: the wiphy + * @chandef: chandef for the current channel + * @gfp: context flags + * + * This function is called when a radar is detected on the current chanenl. + */ +void cfg80211_radar_event(struct wiphy *wiphy, + struct cfg80211_chan_def *chandef, gfp_t gfp); + +/** + * cfg80211_cac_event - Channel availability check (CAC) event + * @netdev: network device + * @event: type of event + * @gfp: context flags + * + * This function is called when a Channel availability check (CAC) is finished + * or aborted. This must be called to notify the completion of a CAC process, + * also by full-MAC drivers. + */ +void cfg80211_cac_event(struct net_device *netdev, + enum nl80211_radar_event event, gfp_t gfp); + + /** * cfg80211_cqm_pktloss_notify - notify userspace about packetloss to peer * @dev: network device diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 5309b34930ea..90b7af86f392 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -603,6 +603,14 @@ * command is used in AP/P2P GO mode. Driver has to make sure to clear its * ACL list during %NL80211_CMD_STOP_AP. * + * @NL80211_CMD_RADAR_DETECT: Start a Channel availability check (CAC). Once + * a radar is detected or the channel availability scan (CAC) has finished + * or was aborted, or a radar was detected, usermode will be notified with + * this event. This command is also used to notify userspace about radars + * while operating on this channel. + * %NL80211_ATTR_RADAR_EVENT is used to inform about the type of the + * event. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -755,6 +763,8 @@ enum nl80211_commands { NL80211_CMD_SET_MAC_ACL, + NL80211_CMD_RADAR_DETECT, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -1342,6 +1352,9 @@ enum nl80211_commands { * number of MAC addresses that a device can support for MAC * ACL. * + * @NL80211_ATTR_RADAR_EVENT: Type of radar event for notification to userspace, + * contains a value of enum nl80211_radar_event (u32). + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -1620,6 +1633,8 @@ enum nl80211_attrs { NL80211_ATTR_MAC_ACL_MAX, + NL80211_ATTR_RADAR_EVENT, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -2022,6 +2037,10 @@ enum nl80211_band_attr { * on this channel in current regulatory domain. * @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm * (100 * dBm). + * @NL80211_FREQUENCY_ATTR_DFS_STATE: current state for DFS + * (enum nl80211_dfs_state) + * @NL80211_FREQUENCY_ATTR_DFS_TIME: time in miliseconds for how long + * this channel is in this DFS state. * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number * currently defined * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use @@ -2034,6 +2053,8 @@ enum nl80211_frequency_attr { NL80211_FREQUENCY_ATTR_NO_IBSS, NL80211_FREQUENCY_ATTR_RADAR, NL80211_FREQUENCY_ATTR_MAX_TX_POWER, + NL80211_FREQUENCY_ATTR_DFS_STATE, + NL80211_FREQUENCY_ATTR_DFS_TIME, /* keep last */ __NL80211_FREQUENCY_ATTR_AFTER_LAST, @@ -3489,4 +3510,44 @@ enum nl80211_acl_policy { NL80211_ACL_POLICY_DENY_UNLESS_LISTED, }; +/** + * enum nl80211_radar_event - type of radar event for DFS operation + * + * Type of event to be used with NL80211_ATTR_RADAR_EVENT to inform userspace + * about detected radars or success of the channel available check (CAC) + * + * @NL80211_RADAR_DETECTED: A radar pattern has been detected. The channel is + * now unusable. + * @NL80211_RADAR_CAC_FINISHED: Channel Availability Check has been finished, + * the channel is now available. + * @NL80211_RADAR_CAC_ABORTED: Channel Availability Check has been aborted, no + * change to the channel status. + * @NL80211_RADAR_NOP_FINISHED: The Non-Occupancy Period for this channel is + * over, channel becomes usable. + */ +enum nl80211_radar_event { + NL80211_RADAR_DETECTED, + NL80211_RADAR_CAC_FINISHED, + NL80211_RADAR_CAC_ABORTED, + NL80211_RADAR_NOP_FINISHED, +}; + +/** + * enum nl80211_dfs_state - DFS states for channels + * + * Channel states used by the DFS code. + * + * @IEEE80211_DFS_USABLE: The channel can be used, but channel availability + * check (CAC) must be performed before using it for AP or IBSS. + * @IEEE80211_DFS_UNAVAILABLE: A radar has been detected on this channel, it + * is therefore marked as not available. + * @IEEE80211_DFS_AVAILABLE: The channel has been CAC checked and is available. + */ + +enum nl80211_dfs_state { + NL80211_DFS_USABLE, + NL80211_DFS_UNAVAILABLE, + NL80211_DFS_AVAILABLE, +}; + #endif /* __LINUX_NL80211_H */ diff --git a/net/wireless/chan.c b/net/wireless/chan.c index 396373f3ec26..810c23cfb894 100644 --- a/net/wireless/chan.c +++ b/net/wireless/chan.c @@ -147,6 +147,32 @@ static void chandef_primary_freqs(const struct cfg80211_chan_def *c, } } +static int cfg80211_chandef_get_width(const struct cfg80211_chan_def *c) +{ + int width; + + switch (c->width) { + case NL80211_CHAN_WIDTH_20: + case NL80211_CHAN_WIDTH_20_NOHT: + width = 20; + break; + case NL80211_CHAN_WIDTH_40: + width = 40; + break; + case NL80211_CHAN_WIDTH_80P80: + case NL80211_CHAN_WIDTH_80: + width = 80; + break; + case NL80211_CHAN_WIDTH_160: + width = 160; + break; + default: + WARN_ON_ONCE(1); + return -1; + } + return width; +} + const struct cfg80211_chan_def * cfg80211_chandef_compatible(const struct cfg80211_chan_def *c1, const struct cfg80211_chan_def *c2) @@ -192,6 +218,93 @@ cfg80211_chandef_compatible(const struct cfg80211_chan_def *c1, } EXPORT_SYMBOL(cfg80211_chandef_compatible); +static void cfg80211_set_chans_dfs_state(struct wiphy *wiphy, u32 center_freq, + u32 bandwidth, + enum nl80211_dfs_state dfs_state) +{ + struct ieee80211_channel *c; + u32 freq; + + for (freq = center_freq - bandwidth/2 + 10; + freq <= center_freq + bandwidth/2 - 10; + freq += 20) { + c = ieee80211_get_channel(wiphy, freq); + if (!c || !(c->flags & IEEE80211_CHAN_RADAR)) + continue; + + c->dfs_state = dfs_state; + c->dfs_state_entered = jiffies; + } +} + +void cfg80211_set_dfs_state(struct wiphy *wiphy, + const struct cfg80211_chan_def *chandef, + enum nl80211_dfs_state dfs_state) +{ + int width; + + if (WARN_ON(!cfg80211_chandef_valid(chandef))) + return; + + width = cfg80211_chandef_get_width(chandef); + if (width < 0) + return; + + cfg80211_set_chans_dfs_state(wiphy, chandef->center_freq1, + width, dfs_state); + + if (!chandef->center_freq2) + return; + cfg80211_set_chans_dfs_state(wiphy, chandef->center_freq2, + width, dfs_state); +} + +static int cfg80211_get_chans_dfs_required(struct wiphy *wiphy, + u32 center_freq, + u32 bandwidth) +{ + struct ieee80211_channel *c; + u32 freq; + + for (freq = center_freq - bandwidth/2 + 10; + freq <= center_freq + bandwidth/2 - 10; + freq += 20) { + c = ieee80211_get_channel(wiphy, freq); + if (!c) + return -EINVAL; + + if (c->flags & IEEE80211_CHAN_RADAR) + return 1; + } + return 0; +} + + +int cfg80211_chandef_dfs_required(struct wiphy *wiphy, + const struct cfg80211_chan_def *chandef) +{ + int width; + int r; + + if (WARN_ON(!cfg80211_chandef_valid(chandef))) + return -EINVAL; + + width = cfg80211_chandef_get_width(chandef); + if (width < 0) + return -EINVAL; + + r = cfg80211_get_chans_dfs_required(wiphy, chandef->center_freq1, + width); + if (r) + return r; + + if (!chandef->center_freq2) + return 0; + + return cfg80211_get_chans_dfs_required(wiphy, chandef->center_freq2, + width); +} + static bool cfg80211_secondary_chans_ok(struct wiphy *wiphy, u32 center_freq, u32 bandwidth, u32 prohibited_flags) @@ -203,7 +316,16 @@ static bool cfg80211_secondary_chans_ok(struct wiphy *wiphy, freq <= center_freq + bandwidth/2 - 10; freq += 20) { c = ieee80211_get_channel(wiphy, freq); - if (!c || c->flags & prohibited_flags) + if (!c) + return false; + + /* check for radar flags */ + if ((prohibited_flags & c->flags & IEEE80211_CHAN_RADAR) && + (c->dfs_state != NL80211_DFS_AVAILABLE)) + return false; + + /* check for the other flags */ + if (c->flags & prohibited_flags & ~IEEE80211_CHAN_RADAR) return false; } @@ -344,7 +466,10 @@ cfg80211_get_chan_state(struct wireless_dev *wdev, break; case NL80211_IFTYPE_AP: case NL80211_IFTYPE_P2P_GO: - if (wdev->beacon_interval) { + if (wdev->cac_started) { + *chan = wdev->channel; + *chanmode = CHAN_MODE_SHARED; + } else if (wdev->beacon_interval) { *chan = wdev->channel; *chanmode = CHAN_MODE_SHARED; } diff --git a/net/wireless/core.c b/net/wireless/core.c index f0a1bbe95cff..922002105062 100644 --- a/net/wireless/core.c +++ b/net/wireless/core.c @@ -324,6 +324,8 @@ struct wiphy *wiphy_new(const struct cfg80211_ops *ops, int sizeof_priv) INIT_LIST_HEAD(&rdev->bss_list); INIT_WORK(&rdev->scan_done_wk, __cfg80211_scan_done); INIT_WORK(&rdev->sched_scan_results_wk, __cfg80211_sched_scan_results); + INIT_DELAYED_WORK(&rdev->dfs_update_channels_wk, + cfg80211_dfs_channels_update_work); #ifdef CONFIG_CFG80211_WEXT rdev->wiphy.wext = &cfg80211_wext_handler; #endif @@ -695,6 +697,7 @@ void wiphy_unregister(struct wiphy *wiphy) flush_work(&rdev->scan_done_wk); cancel_work_sync(&rdev->conn_work); flush_work(&rdev->event_work); + cancel_delayed_work_sync(&rdev->dfs_update_channels_wk); if (rdev->wowlan && rdev->ops->set_wakeup) rdev_set_wakeup(rdev, false); diff --git a/net/wireless/core.h b/net/wireless/core.h index 949c9573d8d7..3aec0e429d8a 100644 --- a/net/wireless/core.h +++ b/net/wireless/core.h @@ -86,6 +86,8 @@ struct cfg80211_registered_device { struct cfg80211_wowlan *wowlan; + struct delayed_work dfs_update_channels_wk; + /* must be last because of the way we do wiphy_priv(), * and it should at least be aligned to NETDEV_ALIGN */ struct wiphy wiphy __aligned(NETDEV_ALIGN); @@ -431,6 +433,22 @@ int cfg80211_can_use_iftype_chan(struct cfg80211_registered_device *rdev, enum cfg80211_chan_mode chanmode, u8 radar_detect); +/** + * cfg80211_chandef_dfs_required - checks if radar detection is required + * @wiphy: the wiphy to validate against + * @chandef: the channel definition to check + * Return: 1 if radar detection is required, 0 if it is not, < 0 on error + */ +int cfg80211_chandef_dfs_required(struct wiphy *wiphy, + const struct cfg80211_chan_def *c); + +void cfg80211_set_dfs_state(struct wiphy *wiphy, + const struct cfg80211_chan_def *chandef, + enum nl80211_dfs_state dfs_state); + +void cfg80211_dfs_channels_update_work(struct work_struct *work); + + static inline int cfg80211_can_change_interface(struct cfg80211_registered_device *rdev, struct wireless_dev *wdev, @@ -457,6 +475,16 @@ cfg80211_can_use_chan(struct cfg80211_registered_device *rdev, chan, chanmode, 0); } +static inline unsigned int elapsed_jiffies_msecs(unsigned long start) +{ + unsigned long end = jiffies; + + if (end >= start) + return jiffies_to_msecs(end - start); + + return jiffies_to_msecs(end + (MAX_JIFFY_OFFSET - start) + 1); +} + void cfg80211_get_chan_state(struct wireless_dev *wdev, struct ieee80211_channel **chan, diff --git a/net/wireless/mlme.c b/net/wireless/mlme.c index 8e6920728c43..caddca35d686 100644 --- a/net/wireless/mlme.c +++ b/net/wireless/mlme.c @@ -987,3 +987,123 @@ void cfg80211_pmksa_candidate_notify(struct net_device *dev, int index, nl80211_pmksa_candidate_notify(rdev, dev, index, bssid, preauth, gfp); } EXPORT_SYMBOL(cfg80211_pmksa_candidate_notify); + +void cfg80211_dfs_channels_update_work(struct work_struct *work) +{ + struct delayed_work *delayed_work; + struct cfg80211_registered_device *rdev; + struct cfg80211_chan_def chandef; + struct ieee80211_supported_band *sband; + struct ieee80211_channel *c; + struct wiphy *wiphy; + bool check_again = false; + unsigned long timeout, next_time = 0; + int bandid, i; + + delayed_work = container_of(work, struct delayed_work, work); + rdev = container_of(delayed_work, struct cfg80211_registered_device, + dfs_update_channels_wk); + wiphy = &rdev->wiphy; + + mutex_lock(&cfg80211_mutex); + for (bandid = 0; bandid < IEEE80211_NUM_BANDS; bandid++) { + sband = wiphy->bands[bandid]; + if (!sband) + continue; + + for (i = 0; i < sband->n_channels; i++) { + c = &sband->channels[i]; + + if (c->dfs_state != NL80211_DFS_UNAVAILABLE) + continue; + + timeout = c->dfs_state_entered + + IEEE80211_DFS_MIN_NOP_TIME_MS; + + if (time_after_eq(jiffies, timeout)) { + c->dfs_state = NL80211_DFS_USABLE; + cfg80211_chandef_create(&chandef, c, + NL80211_CHAN_NO_HT); + + nl80211_radar_notify(rdev, &chandef, + NL80211_RADAR_NOP_FINISHED, + NULL, GFP_ATOMIC); + continue; + } + + if (!check_again) + next_time = timeout - jiffies; + else + next_time = min(next_time, timeout - jiffies); + check_again = true; + } + } + mutex_unlock(&cfg80211_mutex); + + /* reschedule if there are other channels waiting to be cleared again */ + if (check_again) + queue_delayed_work(cfg80211_wq, &rdev->dfs_update_channels_wk, + next_time); +} + + +void cfg80211_radar_event(struct wiphy *wiphy, + struct cfg80211_chan_def *chandef, + gfp_t gfp) +{ + struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy); + unsigned long timeout; + + trace_cfg80211_radar_event(wiphy, chandef); + + /* only set the chandef supplied channel to unavailable, in + * case the radar is detected on only one of multiple channels + * spanned by the chandef. + */ + cfg80211_set_dfs_state(wiphy, chandef, NL80211_DFS_UNAVAILABLE); + + timeout = msecs_to_jiffies(IEEE80211_DFS_MIN_NOP_TIME_MS); + queue_delayed_work(cfg80211_wq, &rdev->dfs_update_channels_wk, + timeout); + + nl80211_radar_notify(rdev, chandef, NL80211_RADAR_DETECTED, NULL, gfp); +} +EXPORT_SYMBOL(cfg80211_radar_event); + +void cfg80211_cac_event(struct net_device *netdev, + enum nl80211_radar_event event, gfp_t gfp) +{ + struct wireless_dev *wdev = netdev->ieee80211_ptr; + struct wiphy *wiphy = wdev->wiphy; + struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy); + struct cfg80211_chan_def chandef; + unsigned long timeout; + + trace_cfg80211_cac_event(netdev, event); + + if (WARN_ON(!wdev->cac_started)) + return; + + if (WARN_ON(!wdev->channel)) + return; + + cfg80211_chandef_create(&chandef, wdev->channel, NL80211_CHAN_NO_HT); + + switch (event) { + case NL80211_RADAR_CAC_FINISHED: + timeout = wdev->cac_start_time + + msecs_to_jiffies(IEEE80211_DFS_MIN_CAC_TIME_MS); + WARN_ON(!time_after_eq(jiffies, timeout)); + cfg80211_set_dfs_state(wiphy, &chandef, NL80211_DFS_AVAILABLE); + break; + case NL80211_RADAR_CAC_ABORTED: + break; + default: + WARN_ON(1); + return; + } + wdev->cac_started = false; + + nl80211_radar_notify(rdev, &chandef, event, netdev, gfp); +} +EXPORT_SYMBOL(cfg80211_cac_event); diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index d29a461b4981..c1e18ccf4049 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -552,9 +552,16 @@ static int nl80211_msg_put_channel(struct sk_buff *msg, if ((chan->flags & IEEE80211_CHAN_NO_IBSS) && nla_put_flag(msg, NL80211_FREQUENCY_ATTR_NO_IBSS)) goto nla_put_failure; - if ((chan->flags & IEEE80211_CHAN_RADAR) && - nla_put_flag(msg, NL80211_FREQUENCY_ATTR_RADAR)) - goto nla_put_failure; + if (chan->flags & IEEE80211_CHAN_RADAR) { + u32 time = elapsed_jiffies_msecs(chan->dfs_state_entered); + if (nla_put_flag(msg, NL80211_FREQUENCY_ATTR_RADAR)) + goto nla_put_failure; + if (nla_put_u32(msg, NL80211_FREQUENCY_ATTR_DFS_STATE, + chan->dfs_state)) + goto nla_put_failure; + if (nla_put_u32(msg, NL80211_FREQUENCY_ATTR_DFS_TIME, time)) + goto nla_put_failure; + } if (nla_put_u32(msg, NL80211_FREQUENCY_ATTR_MAX_TX_POWER, DBM_TO_MBM(chan->max_power))) @@ -2775,6 +2782,7 @@ static int nl80211_start_ap(struct sk_buff *skb, struct genl_info *info) struct wireless_dev *wdev = dev->ieee80211_ptr; struct cfg80211_ap_settings params; int err; + u8 radar_detect_width = 0; if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP && dev->ieee80211_ptr->iftype != NL80211_IFTYPE_P2P_GO) @@ -2893,9 +2901,19 @@ static int nl80211_start_ap(struct sk_buff *skb, struct genl_info *info) if (!cfg80211_reg_can_beacon(&rdev->wiphy, ¶ms.chandef)) return -EINVAL; + err = cfg80211_chandef_dfs_required(wdev->wiphy, ¶ms.chandef); + if (err < 0) + return err; + if (err) { + radar_detect_width = BIT(params.chandef.width); + params.radar_required = true; + } + mutex_lock(&rdev->devlist_mtx); - err = cfg80211_can_use_chan(rdev, wdev, params.chandef.chan, - CHAN_MODE_SHARED); + err = cfg80211_can_use_iftype_chan(rdev, wdev, wdev->iftype, + params.chandef.chan, + CHAN_MODE_SHARED, + radar_detect_width); mutex_unlock(&rdev->devlist_mtx); if (err) @@ -5055,6 +5073,54 @@ static int nl80211_stop_sched_scan(struct sk_buff *skb, return err; } +static int nl80211_start_radar_detection(struct sk_buff *skb, + struct genl_info *info) +{ + struct cfg80211_registered_device *rdev = info->user_ptr[0]; + struct net_device *dev = info->user_ptr[1]; + struct wireless_dev *wdev = dev->ieee80211_ptr; + struct cfg80211_chan_def chandef; + int err; + + err = nl80211_parse_chandef(rdev, info, &chandef); + if (err) + return err; + + if (wdev->cac_started) + return -EBUSY; + + err = cfg80211_chandef_dfs_required(wdev->wiphy, &chandef); + if (err < 0) + return err; + + if (err == 0) + return -EINVAL; + + if (chandef.chan->dfs_state != NL80211_DFS_USABLE) + return -EINVAL; + + if (!rdev->ops->start_radar_detection) + return -EOPNOTSUPP; + + mutex_lock(&rdev->devlist_mtx); + err = cfg80211_can_use_iftype_chan(rdev, wdev, wdev->iftype, + chandef.chan, CHAN_MODE_SHARED, + BIT(chandef.width)); + if (err) + goto err_locked; + + err = rdev->ops->start_radar_detection(&rdev->wiphy, dev, &chandef); + if (!err) { + wdev->channel = chandef.chan; + wdev->cac_started = true; + wdev->cac_start_time = jiffies; + } +err_locked: + mutex_unlock(&rdev->devlist_mtx); + + return err; +} + static int nl80211_send_bss(struct sk_buff *msg, struct netlink_callback *cb, u32 seq, int flags, struct cfg80211_registered_device *rdev, @@ -8305,6 +8371,14 @@ static struct genl_ops nl80211_ops[] = { .internal_flags = NL80211_FLAG_NEED_NETDEV | NL80211_FLAG_NEED_RTNL, }, + { + .cmd = NL80211_CMD_RADAR_DETECT, + .doit = nl80211_start_radar_detection, + .policy = nl80211_policy, + .flags = GENL_ADMIN_PERM, + .internal_flags = NL80211_FLAG_NEED_NETDEV_UP | + NL80211_FLAG_NEED_RTNL, + }, }; static struct genl_multicast_group nl80211_mlme_mcgrp = { @@ -9501,6 +9575,57 @@ nl80211_send_cqm_txe_notify(struct cfg80211_registered_device *rdev, nlmsg_free(msg); } +void +nl80211_radar_notify(struct cfg80211_registered_device *rdev, + struct cfg80211_chan_def *chandef, + enum nl80211_radar_event event, + struct net_device *netdev, gfp_t gfp) +{ + struct sk_buff *msg; + void *hdr; + + msg = nlmsg_new(NLMSG_DEFAULT_SIZE, gfp); + if (!msg) + return; + + hdr = nl80211hdr_put(msg, 0, 0, 0, NL80211_CMD_RADAR_DETECT); + if (!hdr) { + nlmsg_free(msg); + return; + } + + if (nla_put_u32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx)) + goto nla_put_failure; + + /* NOP and radar events don't need a netdev parameter */ + if (netdev) { + struct wireless_dev *wdev = netdev->ieee80211_ptr; + + if (nla_put_u32(msg, NL80211_ATTR_IFINDEX, netdev->ifindex) || + nla_put_u64(msg, NL80211_ATTR_WDEV, wdev_id(wdev))) + goto nla_put_failure; + } + + if (nla_put_u32(msg, NL80211_ATTR_RADAR_EVENT, event)) + goto nla_put_failure; + + if (nl80211_send_chandef(msg, chandef)) + goto nla_put_failure; + + if (genlmsg_end(msg, hdr) < 0) { + nlmsg_free(msg); + return; + } + + genlmsg_multicast_netns(wiphy_net(&rdev->wiphy), msg, 0, + nl80211_mlme_mcgrp.id, gfp); + return; + + nla_put_failure: + genlmsg_cancel(msg, hdr); + nlmsg_free(msg); +} + void nl80211_send_cqm_pktloss_notify(struct cfg80211_registered_device *rdev, struct net_device *netdev, const u8 *peer, diff --git a/net/wireless/nl80211.h b/net/wireless/nl80211.h index 2acba8477e9d..b061da4919e1 100644 --- a/net/wireless/nl80211.h +++ b/net/wireless/nl80211.h @@ -108,6 +108,13 @@ nl80211_send_cqm_rssi_notify(struct cfg80211_registered_device *rdev, struct net_device *netdev, enum nl80211_cqm_rssi_threshold_event rssi_event, gfp_t gfp); + +void +nl80211_radar_notify(struct cfg80211_registered_device *rdev, + struct cfg80211_chan_def *chandef, + enum nl80211_radar_event event, + struct net_device *netdev, gfp_t gfp); + void nl80211_send_cqm_pktloss_notify(struct cfg80211_registered_device *rdev, struct net_device *netdev, const u8 *peer, diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 08d3da2c70ab..e97d5b071ab6 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -884,6 +884,9 @@ static void handle_channel(struct wiphy *wiphy, return; } + chan->dfs_state = NL80211_DFS_USABLE; + chan->dfs_state_entered = jiffies; + chan->beacon_found = false; chan->flags = flags | bw_flags | map_regdom_flags(reg_rule->flags); chan->max_antenna_gain = diff --git a/net/wireless/scan.c b/net/wireless/scan.c index d0fc6da2d097..f0d9b5154bab 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -1210,16 +1210,6 @@ static void ieee80211_scan_add_ies(struct iw_request_info *info, } } -static inline unsigned int elapsed_jiffies_msecs(unsigned long start) -{ - unsigned long end = jiffies; - - if (end >= start) - return jiffies_to_msecs(end - start); - - return jiffies_to_msecs(end + (MAX_JIFFY_OFFSET - start) + 1); -} - static char * ieee80211_bss(struct wiphy *wiphy, struct iw_request_info *info, struct cfg80211_internal_bss *bss, char *current_ev, diff --git a/net/wireless/trace.h b/net/wireless/trace.h index c9cafb0ea95f..b7a531380e19 100644 --- a/net/wireless/trace.h +++ b/net/wireless/trace.h @@ -2051,6 +2051,21 @@ TRACE_EVENT(cfg80211_reg_can_beacon, WIPHY_PR_ARG, CHAN_DEF_PR_ARG) ); +TRACE_EVENT(cfg80211_chandef_dfs_required, + TP_PROTO(struct wiphy *wiphy, struct cfg80211_chan_def *chandef), + TP_ARGS(wiphy, chandef), + TP_STRUCT__entry( + WIPHY_ENTRY + CHAN_DEF_ENTRY + ), + TP_fast_assign( + WIPHY_ASSIGN; + CHAN_DEF_ASSIGN(chandef); + ), + TP_printk(WIPHY_PR_FMT ", " CHAN_DEF_PR_FMT, + WIPHY_PR_ARG, CHAN_DEF_PR_ARG) +); + TRACE_EVENT(cfg80211_ch_switch_notify, TP_PROTO(struct net_device *netdev, struct cfg80211_chan_def *chandef), @@ -2067,6 +2082,36 @@ TRACE_EVENT(cfg80211_ch_switch_notify, NETDEV_PR_ARG, CHAN_DEF_PR_ARG) ); +TRACE_EVENT(cfg80211_radar_event, + TP_PROTO(struct wiphy *wiphy, struct cfg80211_chan_def *chandef), + TP_ARGS(wiphy, chandef), + TP_STRUCT__entry( + WIPHY_ENTRY + CHAN_DEF_ENTRY + ), + TP_fast_assign( + WIPHY_ASSIGN; + CHAN_DEF_ASSIGN(chandef); + ), + TP_printk(WIPHY_PR_FMT ", " CHAN_DEF_PR_FMT, + WIPHY_PR_ARG, CHAN_DEF_PR_ARG) +); + +TRACE_EVENT(cfg80211_cac_event, + TP_PROTO(struct net_device *netdev, enum nl80211_radar_event evt), + TP_ARGS(netdev, evt), + TP_STRUCT__entry( + NETDEV_ENTRY + __field(enum nl80211_radar_event, evt) + ), + TP_fast_assign( + NETDEV_ASSIGN; + __entry->evt = evt; + ), + TP_printk(NETDEV_PR_FMT ", event: %d", + NETDEV_PR_ARG, __entry->evt) +); + DECLARE_EVENT_CLASS(cfg80211_rx_evt, TP_PROTO(struct net_device *netdev, const u8 *addr), TP_ARGS(netdev, addr), From 164eb02d070af987890e1db1c12b8ae0394b19f7 Mon Sep 17 00:00:00 2001 From: Simon Wunderlich Date: Fri, 8 Feb 2013 18:16:20 +0100 Subject: [PATCH 172/209] mac80211: add radar detection command/event Add command to trigger radar detection in the driver/FW. Once radar detection is started it should continuously monitor for radars as long as the channel active. If radar is detected usermode notified with 'radar detected' event. Scanning and remain on channel functionality must be disabled while doing radar detection/scanning, and vice versa. Based on original patch by Victor Goldenshtein Signed-off-by: Simon Wunderlich Signed-off-by: Johannes Berg --- include/net/mac80211.h | 14 ++++++++++++ net/mac80211/cfg.c | 36 ++++++++++++++++++++++++++++- net/mac80211/chan.c | 33 +++++++++++++++++++++++++++ net/mac80211/ieee80211_i.h | 14 ++++++++++++ net/mac80211/iface.c | 12 ++++++++++ net/mac80211/main.c | 13 +++++++++++ net/mac80211/mlme.c | 13 +++++++++++ net/mac80211/pm.c | 2 ++ net/mac80211/scan.c | 3 +++ net/mac80211/trace.h | 19 ++++++++++++++++ net/mac80211/util.c | 46 ++++++++++++++++++++++++++++++++++++++ 11 files changed, 204 insertions(+), 1 deletion(-) diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 0eaa9092364b..7241962f9f13 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -147,10 +147,12 @@ struct ieee80211_low_level_stats { * enum ieee80211_chanctx_change - change flag for channel context * @IEEE80211_CHANCTX_CHANGE_WIDTH: The channel width changed * @IEEE80211_CHANCTX_CHANGE_RX_CHAINS: The number of RX chains changed + * @IEEE80211_CHANCTX_CHANGE_RADAR: radar detection flag changed */ enum ieee80211_chanctx_change { IEEE80211_CHANCTX_CHANGE_WIDTH = BIT(0), IEEE80211_CHANCTX_CHANGE_RX_CHAINS = BIT(1), + IEEE80211_CHANCTX_CHANGE_RADAR = BIT(2), }; /** @@ -165,6 +167,7 @@ enum ieee80211_chanctx_change { * @rx_chains_dynamic: The number of RX chains that must be enabled * after RTS/CTS handshake to receive SMPS MIMO transmissions; * this will always be >= @rx_chains_static. + * @radar_enabled: whether radar detection is enabled on this channel. * @drv_priv: data area for driver use, will always be aligned to * sizeof(void *), size is determined in hw information. */ @@ -173,6 +176,8 @@ struct ieee80211_chanctx_conf { u8 rx_chains_static, rx_chains_dynamic; + bool radar_enabled; + u8 drv_priv[0] __aligned(sizeof(void *)); }; @@ -967,6 +972,7 @@ enum ieee80211_smps_mode { * * @channel: the channel to tune to * @channel_type: the channel (HT) type + * @radar_enabled: whether radar detection is enabled * * @long_frame_max_tx_count: Maximum number of transmissions for a "long" frame * (a frame not RTS protected), called "dot11LongRetryLimit" in 802.11, @@ -993,6 +999,7 @@ struct ieee80211_conf { struct ieee80211_channel *channel; enum nl80211_channel_type channel_type; + bool radar_enabled; enum ieee80211_smps_mode smps_mode; }; @@ -3944,6 +3951,13 @@ void ieee80211_cqm_rssi_notify(struct ieee80211_vif *vif, enum nl80211_cqm_rssi_threshold_event rssi_event, gfp_t gfp); +/** + * ieee80211_radar_detected - inform that a radar was detected + * + * @hw: pointer as obtained from ieee80211_alloc_hw() + */ +void ieee80211_radar_detected(struct ieee80211_hw *hw); + /** * ieee80211_chswitch_done - Complete channel switch process * @vif: &struct ieee80211_vif pointer from the add_interface callback. diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index e3dec80cf617..0969978c2d92 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -928,6 +928,7 @@ static int ieee80211_start_ap(struct wiphy *wiphy, struct net_device *dev, /* TODO: make hostapd tell us what it wants */ sdata->smps_mode = IEEE80211_SMPS_OFF; sdata->needed_rx_chains = sdata->local->rx_chains; + sdata->radar_required = params->radar_required; err = ieee80211_vif_use_channel(sdata, ¶ms->chandef, IEEE80211_CHANCTX_SHARED); @@ -2395,7 +2396,8 @@ static int ieee80211_start_roc_work(struct ieee80211_local *local, INIT_LIST_HEAD(&roc->dependents); /* if there's one pending or we're scanning, queue this one */ - if (!list_empty(&local->roc_list) || local->scanning) + if (!list_empty(&local->roc_list) || + local->scanning || local->radar_detect_enabled) goto out_check_combine; /* if not HW assist, just queue & schedule work */ @@ -2645,6 +2647,37 @@ static int ieee80211_cancel_remain_on_channel(struct wiphy *wiphy, return ieee80211_cancel_roc(local, cookie, false); } +static int ieee80211_start_radar_detection(struct wiphy *wiphy, + struct net_device *dev, + struct cfg80211_chan_def *chandef) +{ + struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + struct ieee80211_local *local = sdata->local; + unsigned long timeout; + int err; + + if (!list_empty(&local->roc_list) || local->scanning) + return -EBUSY; + + /* whatever, but channel contexts should not complain about that one */ + sdata->smps_mode = IEEE80211_SMPS_OFF; + sdata->needed_rx_chains = local->rx_chains; + sdata->radar_required = true; + + mutex_lock(&local->iflist_mtx); + err = ieee80211_vif_use_channel(sdata, chandef, + IEEE80211_CHANCTX_SHARED); + mutex_unlock(&local->iflist_mtx); + if (err) + return err; + + timeout = msecs_to_jiffies(IEEE80211_DFS_MIN_CAC_TIME_MS); + ieee80211_queue_delayed_work(&sdata->local->hw, + &sdata->dfs_cac_timer_work, timeout); + + return 0; +} + static int ieee80211_mgmt_tx(struct wiphy *wiphy, struct wireless_dev *wdev, struct ieee80211_channel *chan, bool offchan, unsigned int wait, const u8 *buf, size_t len, @@ -3350,4 +3383,5 @@ struct cfg80211_ops mac80211_config_ops = { .get_et_stats = ieee80211_get_et_stats, .get_et_strings = ieee80211_get_et_strings, .get_channel = ieee80211_cfg_get_channel, + .start_radar_detection = ieee80211_start_radar_detection, }; diff --git a/net/mac80211/chan.c b/net/mac80211/chan.c index 038f249966d6..2e6faeda22ad 100644 --- a/net/mac80211/chan.c +++ b/net/mac80211/chan.c @@ -193,6 +193,7 @@ static void ieee80211_unassign_vif_chanctx(struct ieee80211_sub_if_data *sdata, if (ctx->refcount > 0) { ieee80211_recalc_chanctx_chantype(sdata->local, ctx); ieee80211_recalc_smps_chanctx(local, ctx); + ieee80211_recalc_radar_chanctx(local, ctx); } } @@ -216,6 +217,37 @@ static void __ieee80211_vif_release_channel(struct ieee80211_sub_if_data *sdata) ieee80211_free_chanctx(local, ctx); } +void ieee80211_recalc_radar_chanctx(struct ieee80211_local *local, + struct ieee80211_chanctx *chanctx) +{ + struct ieee80211_sub_if_data *sdata; + bool radar_enabled = false; + + lockdep_assert_held(&local->chanctx_mtx); + + rcu_read_lock(); + list_for_each_entry_rcu(sdata, &local->interfaces, list) { + if (sdata->radar_required) { + radar_enabled = true; + break; + } + } + rcu_read_unlock(); + + if (radar_enabled == chanctx->conf.radar_enabled) + return; + + chanctx->conf.radar_enabled = radar_enabled; + local->radar_detect_enabled = chanctx->conf.radar_enabled; + + if (!local->use_chanctx) { + local->hw.conf.radar_enabled = chanctx->conf.radar_enabled; + ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL); + } + + drv_change_chanctx(local, chanctx, IEEE80211_CHANCTX_CHANGE_RADAR); +} + void ieee80211_recalc_smps_chanctx(struct ieee80211_local *local, struct ieee80211_chanctx *chanctx) { @@ -331,6 +363,7 @@ int ieee80211_vif_use_channel(struct ieee80211_sub_if_data *sdata, } ieee80211_recalc_smps_chanctx(local, ctx); + ieee80211_recalc_radar_chanctx(local, ctx); out: mutex_unlock(&local->chanctx_mtx); return ret; diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 76cdcfcd614c..0e0a9776be39 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -722,6 +722,9 @@ struct ieee80211_sub_if_data { int user_power_level; /* in dBm */ int ap_power_level; /* in dBm */ + bool radar_required; + struct delayed_work dfs_cac_timer_work; + /* * AP this belongs to: self in AP mode and * corresponding AP in VLAN mode, NULL for @@ -942,6 +945,10 @@ struct ieee80211_local { /* wowlan is enabled -- don't reconfig on resume */ bool wowlan; + /* DFS/radar detection is enabled */ + bool radar_detect_enabled; + struct work_struct radar_detected_work; + /* number of RX chains the hardware has */ u8 rx_chains; @@ -1606,6 +1613,13 @@ void ieee80211_vif_copy_chanctx_to_vlans(struct ieee80211_sub_if_data *sdata, void ieee80211_recalc_smps_chanctx(struct ieee80211_local *local, struct ieee80211_chanctx *chanctx); +void ieee80211_recalc_radar_chanctx(struct ieee80211_local *local, + struct ieee80211_chanctx *chanctx); + +void ieee80211_dfs_cac_timer(unsigned long data); +void ieee80211_dfs_cac_timer_work(struct work_struct *work); +void ieee80211_dfs_cac_cancel(struct ieee80211_local *local); +void ieee80211_dfs_radar_detected_work(struct work_struct *work); #ifdef CONFIG_MAC80211_NOINLINE #define debug_noinline noinline diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 40ff0307d089..e9223ce2bf99 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -749,6 +749,16 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, cancel_work_sync(&sdata->recalc_smps); + cancel_delayed_work_sync(&sdata->dfs_cac_timer_work); + + if (sdata->wdev.cac_started) { + mutex_lock(&local->iflist_mtx); + ieee80211_vif_release_channel(sdata); + mutex_unlock(&local->iflist_mtx); + cfg80211_cac_event(sdata->dev, NL80211_RADAR_CAC_ABORTED, + GFP_KERNEL); + } + /* APs need special treatment */ if (sdata->vif.type == NL80211_IFTYPE_AP) { struct ieee80211_sub_if_data *vlan, *tmpsdata; @@ -1513,6 +1523,8 @@ int ieee80211_if_add(struct ieee80211_local *local, const char *name, spin_lock_init(&sdata->cleanup_stations_lock); INIT_LIST_HEAD(&sdata->cleanup_stations); INIT_WORK(&sdata->cleanup_stations_wk, ieee80211_cleanup_sdata_stas_wk); + INIT_DELAYED_WORK(&sdata->dfs_cac_timer_work, + ieee80211_dfs_cac_timer_work); for (i = 0; i < IEEE80211_NUM_BANDS; i++) { struct ieee80211_supported_band *sband; diff --git a/net/mac80211/main.c b/net/mac80211/main.c index 38b3468bc515..9cdbc774cfd7 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -621,6 +621,9 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len, INIT_WORK(&local->restart_work, ieee80211_restart_work); + INIT_WORK(&local->radar_detected_work, + ieee80211_dfs_radar_detected_work); + INIT_WORK(&local->reconfig_filter, ieee80211_reconfig_filter); local->smps_mode = IEEE80211_SMPS_OFF; @@ -713,6 +716,16 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) */ if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_WDS)) return -EINVAL; + + /* DFS currently not supported with channel context drivers */ + for (i = 0; i < local->hw.wiphy->n_iface_combinations; i++) { + const struct ieee80211_iface_combination *comb; + + comb = &local->hw.wiphy->iface_combinations[i]; + + if (comb->radar_detect_widths) + return -EINVAL; + } } /* Only HW csum features are currently compatible with mac80211 */ diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index efb22763d56d..7d4cde7af98e 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1212,6 +1212,19 @@ void ieee80211_dynamic_ps_timer(unsigned long data) ieee80211_queue_work(&local->hw, &local->dynamic_ps_enable_work); } +void ieee80211_dfs_cac_timer_work(struct work_struct *work) +{ + struct delayed_work *delayed_work = + container_of(work, struct delayed_work, work); + struct ieee80211_sub_if_data *sdata = + container_of(delayed_work, struct ieee80211_sub_if_data, + dfs_cac_timer_work); + + ieee80211_vif_release_channel(sdata); + + cfg80211_cac_event(sdata->dev, NL80211_RADAR_CAC_FINISHED, GFP_KERNEL); +} + /* MLME */ static bool ieee80211_sta_wmm_params(struct ieee80211_local *local, struct ieee80211_sub_if_data *sdata, diff --git a/net/mac80211/pm.c b/net/mac80211/pm.c index 53801d20176d..d0275f34bf70 100644 --- a/net/mac80211/pm.c +++ b/net/mac80211/pm.c @@ -38,6 +38,8 @@ int __ieee80211_suspend(struct ieee80211_hw *hw, struct cfg80211_wowlan *wowlan) ieee80211_scan_cancel(local); + ieee80211_dfs_cac_cancel(local); + if (hw->flags & IEEE80211_HW_AMPDU_AGGREGATION) { mutex_lock(&local->sta_mtx); list_for_each_entry(sta, &local->sta_list, list) { diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index 6d0b89e4aa31..43a45cf00e06 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -351,6 +351,9 @@ static int ieee80211_start_sw_scan(struct ieee80211_local *local) static bool ieee80211_can_scan(struct ieee80211_local *local, struct ieee80211_sub_if_data *sdata) { + if (local->radar_detect_enabled) + return false; + if (!list_empty(&local->roc_list)) return false; diff --git a/net/mac80211/trace.h b/net/mac80211/trace.h index 0bdd7aeb8958..1183c4a4fee5 100644 --- a/net/mac80211/trace.h +++ b/net/mac80211/trace.h @@ -1862,6 +1862,25 @@ TRACE_EVENT(drv_set_default_unicast_key, LOCAL_PR_ARG, VIF_PR_ARG, __entry->key_idx) ); +TRACE_EVENT(api_radar_detected, + TP_PROTO(struct ieee80211_local *local), + + TP_ARGS(local), + + TP_STRUCT__entry( + LOCAL_ENTRY + ), + + TP_fast_assign( + LOCAL_ASSIGN; + ), + + TP_printk( + LOCAL_PR_FMT " radar detected", + LOCAL_PR_ARG + ) +); + #ifdef CONFIG_MAC80211_MESSAGE_TRACING #undef TRACE_SYSTEM #define TRACE_SYSTEM mac80211_msg diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 6cb71a350edd..218cb52f2b59 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -2133,3 +2133,49 @@ u64 ieee80211_calculate_rx_timestamp(struct ieee80211_local *local, return ts; } + +void ieee80211_dfs_cac_cancel(struct ieee80211_local *local) +{ + struct ieee80211_sub_if_data *sdata; + + mutex_lock(&local->iflist_mtx); + list_for_each_entry(sdata, &local->interfaces, list) { + cancel_delayed_work_sync(&sdata->dfs_cac_timer_work); + + if (sdata->wdev.cac_started) { + ieee80211_vif_release_channel(sdata); + cfg80211_cac_event(sdata->dev, + NL80211_RADAR_CAC_ABORTED, + GFP_KERNEL); + } + } + mutex_unlock(&local->iflist_mtx); +} + +void ieee80211_dfs_radar_detected_work(struct work_struct *work) +{ + struct ieee80211_local *local = + container_of(work, struct ieee80211_local, radar_detected_work); + struct cfg80211_chan_def chandef; + + ieee80211_dfs_cac_cancel(local); + + if (local->use_chanctx) + /* currently not handled */ + WARN_ON(1); + else { + cfg80211_chandef_create(&chandef, local->hw.conf.channel, + local->hw.conf.channel_type); + cfg80211_radar_event(local->hw.wiphy, &chandef, GFP_KERNEL); + } +} + +void ieee80211_radar_detected(struct ieee80211_hw *hw) +{ + struct ieee80211_local *local = hw_to_local(hw); + + trace_api_radar_detected(local); + + ieee80211_queue_work(hw, &local->radar_detected_work); +} +EXPORT_SYMBOL(ieee80211_radar_detected); From 397a7a24ef8c2967a3e8090013f9c54714110c48 Mon Sep 17 00:00:00 2001 From: Michael Braun Date: Wed, 13 Feb 2013 16:49:15 +0100 Subject: [PATCH 173/209] mac80211: free ps->bc_buf skbs on vlan device stop When the vlan device is removed, ps->bc_buf processing can no longer send its frames. Signed-off-by: Michael Braun Signed-off-by: Johannes Berg --- net/mac80211/iface.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index e9223ce2bf99..86c83084542a 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -680,6 +680,7 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb, *tmp; u32 hw_reconf_flags = 0; int i, flushed; + struct ps_data *ps; clear_bit(SDATA_STATE_RUNNING, &sdata->state); @@ -768,6 +769,19 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, u.vlan.list) dev_close(vlan->dev); WARN_ON(!list_empty(&sdata->u.ap.vlans)); + } else if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) { + /* remove all packets in parent bc_buf pointing to this dev */ + ps = &sdata->bss->ps; + + spin_lock_irqsave(&ps->bc_buf.lock, flags); + skb_queue_walk_safe(&ps->bc_buf, skb, tmp) { + if (skb->dev == sdata->dev) { + __skb_unlink(skb, &ps->bc_buf); + local->total_ps_buffered--; + ieee80211_free_txskb(&local->hw, skb); + } + } + spin_unlock_irqrestore(&ps->bc_buf.lock, flags); } else if (sdata->vif.type == NL80211_IFTYPE_STATION) { ieee80211_mgd_stop(sdata); } From de74a1d9032f4d37ea453ad2a647e1aff4cd2591 Mon Sep 17 00:00:00 2001 From: Michael Braun Date: Wed, 13 Feb 2013 16:49:16 +0100 Subject: [PATCH 174/209] mac80211: fix WPA with VLAN on AP side with ps-sta When sending a broadcast while at least on of the connected stations is sleeping, it gets queued and send after a DTIM beacon is sent. If the packet was to be sent on a vlan interface, the vif used for dequeing from the per-bss queue does not hold the per-vlan sdata. The correct sdata is required to use the correct per-vlan broadcast/multicast key. This patch fixes this by restoring the per-vlan sdata using the skb->dev entry. Signed-off-by: Michael Braun Signed-off-by: Johannes Berg --- net/mac80211/tx.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index f476aa6a771d..71385bfc15d6 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -2785,6 +2785,7 @@ ieee80211_get_buffered_bc(struct ieee80211_hw *hw, cpu_to_le16(IEEE80211_FCTL_MOREDATA); } + sdata = IEEE80211_DEV_TO_SUB_IF(skb->dev); if (!ieee80211_tx_prepare(sdata, &tx, skb)) break; dev_kfree_skb_any(skb); From 39886b618aba3c39e650c191d601e26ec581ce0f Mon Sep 17 00:00:00 2001 From: Thomas Pedersen Date: Wed, 13 Feb 2013 12:14:19 -0800 Subject: [PATCH 175/209] mac80211: consolidate MBSS change notification A few mesh utility functions will call ieee80211_bss_info_change_notify(), and then the caller might notify the driver of the same change again. Avoid this redundancy by propagating the BSS changes and generally calling bss_info_change_notify() once per change. Signed-off-by: Thomas Pedersen Signed-off-by: Johannes Berg --- net/mac80211/cfg.c | 20 +++++++++++--------- net/mac80211/mesh.c | 2 +- net/mac80211/mesh.h | 10 +++++----- net/mac80211/mesh_plink.c | 33 ++++++++++++++++++--------------- net/mac80211/mesh_ps.c | 27 ++++++++++++++++++++------- 5 files changed, 55 insertions(+), 37 deletions(-) diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 0969978c2d92..f4db30624f67 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1262,9 +1262,8 @@ static int sta_apply_parameters(struct ieee80211_local *local, if (ieee80211_vif_is_mesh(&sdata->vif)) { #ifdef CONFIG_MAC80211_MESH + u32 changed = 0; if (sdata->u.mesh.security & IEEE80211_MESH_SEC_SECURED) { - u32 changed = 0; - switch (params->plink_state) { case NL80211_PLINK_ESTAB: if (sta->plink_state != NL80211_PLINK_ESTAB) @@ -1273,8 +1272,8 @@ static int sta_apply_parameters(struct ieee80211_local *local, sta->plink_state = params->plink_state; ieee80211_mps_sta_status_update(sta); - ieee80211_mps_set_sta_local_pm(sta, - sdata->u.mesh.mshcfg.power_mode); + changed |= ieee80211_mps_set_sta_local_pm(sta, + sdata->u.mesh.mshcfg.power_mode); break; case NL80211_PLINK_LISTEN: case NL80211_PLINK_BLOCKED: @@ -1288,26 +1287,29 @@ static int sta_apply_parameters(struct ieee80211_local *local, sta->plink_state = params->plink_state; ieee80211_mps_sta_status_update(sta); - ieee80211_mps_local_status_update(sdata); + changed |= + ieee80211_mps_local_status_update(sdata); break; default: /* nothing */ break; } - ieee80211_bss_info_change_notify(sdata, changed); } else { switch (params->plink_action) { case PLINK_ACTION_OPEN: - mesh_plink_open(sta); + changed |= mesh_plink_open(sta); break; case PLINK_ACTION_BLOCK: - mesh_plink_block(sta); + changed |= mesh_plink_block(sta); break; } } if (params->local_pm) - ieee80211_mps_set_sta_local_pm(sta, params->local_pm); + changed |= + ieee80211_mps_set_sta_local_pm(sta, + params->local_pm); + ieee80211_bss_info_change_notify(sdata, changed); #endif } diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index 2bf0158c3f82..0adec3d539d3 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -675,7 +675,7 @@ void ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata) sdata->vif.bss_conf.basic_rates = ieee80211_mandatory_rates(local, band); - ieee80211_mps_local_status_update(sdata); + changed |= ieee80211_mps_local_status_update(sdata); ieee80211_bss_info_change_notify(sdata, changed); diff --git a/net/mac80211/mesh.h b/net/mac80211/mesh.h index 3b9d862744ba..7ad035f0cacc 100644 --- a/net/mac80211/mesh.h +++ b/net/mac80211/mesh.h @@ -245,9 +245,9 @@ void ieee80211_mesh_root_setup(struct ieee80211_if_mesh *ifmsh); const struct ieee80211_mesh_sync_ops *ieee80211_mesh_sync_ops_get(u8 method); /* mesh power save */ -void ieee80211_mps_local_status_update(struct ieee80211_sub_if_data *sdata); -void ieee80211_mps_set_sta_local_pm(struct sta_info *sta, - enum nl80211_mesh_power_mode pm); +u32 ieee80211_mps_local_status_update(struct ieee80211_sub_if_data *sdata); +u32 ieee80211_mps_set_sta_local_pm(struct sta_info *sta, + enum nl80211_mesh_power_mode pm); void ieee80211_mps_set_frame_flags(struct ieee80211_sub_if_data *sdata, struct sta_info *sta, struct ieee80211_hdr *hdr); @@ -289,8 +289,8 @@ bool mesh_peer_accepts_plinks(struct ieee802_11_elems *ie); u32 mesh_accept_plinks_update(struct ieee80211_sub_if_data *sdata); void mesh_plink_broken(struct sta_info *sta); u32 mesh_plink_deactivate(struct sta_info *sta); -int mesh_plink_open(struct sta_info *sta); -void mesh_plink_block(struct sta_info *sta); +u32 mesh_plink_open(struct sta_info *sta); +u32 mesh_plink_block(struct sta_info *sta); void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_mgmt *mgmt, size_t len, struct ieee80211_rx_status *rx_status); diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c index 56c9b318a97e..a4c7a7e98d14 100644 --- a/net/mac80211/mesh_plink.c +++ b/net/mac80211/mesh_plink.c @@ -202,7 +202,7 @@ static u32 __mesh_plink_deactivate(struct sta_info *sta) mesh_path_flush_by_nexthop(sta); ieee80211_mps_sta_status_update(sta); - ieee80211_mps_local_status_update(sdata); + changed |= ieee80211_mps_local_status_update(sdata); return changed; } @@ -494,6 +494,7 @@ void mesh_neighbour_update(struct ieee80211_sub_if_data *sdata, struct ieee802_11_elems *elems) { struct sta_info *sta; + u32 changed = 0; sta = mesh_sta_info_get(sdata, hw_addr, elems); if (!sta) @@ -504,11 +505,12 @@ void mesh_neighbour_update(struct ieee80211_sub_if_data *sdata, sdata->u.mesh.accepting_plinks && sdata->u.mesh.mshcfg.auto_open_plinks && rssi_threshold_check(sta, sdata)) - mesh_plink_open(sta); + changed = mesh_plink_open(sta); ieee80211_mps_frame_release(sta, elems); out: rcu_read_unlock(); + ieee80211_bss_info_change_notify(sdata, changed); } static void mesh_plink_timer(unsigned long data) @@ -621,13 +623,14 @@ static inline void mesh_plink_timer_set(struct sta_info *sta, int timeout) add_timer(&sta->plink_timer); } -int mesh_plink_open(struct sta_info *sta) +u32 mesh_plink_open(struct sta_info *sta) { __le16 llid; struct ieee80211_sub_if_data *sdata = sta->sdata; + u32 changed; if (!test_sta_flag(sta, WLAN_STA_AUTH)) - return -EPERM; + return 0; spin_lock_bh(&sta->lock); get_random_bytes(&llid, 2); @@ -635,7 +638,7 @@ int mesh_plink_open(struct sta_info *sta) if (sta->plink_state != NL80211_PLINK_LISTEN && sta->plink_state != NL80211_PLINK_BLOCKED) { spin_unlock_bh(&sta->lock); - return -EBUSY; + return 0; } sta->plink_state = NL80211_PLINK_OPN_SNT; mesh_plink_timer_set(sta, sdata->u.mesh.mshcfg.dot11MeshRetryTimeout); @@ -645,15 +648,15 @@ int mesh_plink_open(struct sta_info *sta) sta->sta.addr); /* set the non-peer mode to active during peering */ - ieee80211_mps_local_status_update(sdata); + changed = ieee80211_mps_local_status_update(sdata); - return mesh_plink_frame_tx(sdata, WLAN_SP_MESH_PEERING_OPEN, - sta->sta.addr, llid, 0, 0); + mesh_plink_frame_tx(sdata, WLAN_SP_MESH_PEERING_OPEN, + sta->sta.addr, llid, 0, 0); + return changed; } -void mesh_plink_block(struct sta_info *sta) +u32 mesh_plink_block(struct sta_info *sta) { - struct ieee80211_sub_if_data *sdata = sta->sdata; u32 changed; spin_lock_bh(&sta->lock); @@ -661,7 +664,7 @@ void mesh_plink_block(struct sta_info *sta) sta->plink_state = NL80211_PLINK_BLOCKED; spin_unlock_bh(&sta->lock); - ieee80211_bss_info_change_notify(sdata, changed); + return changed; } @@ -882,7 +885,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m mshcfg->dot11MeshRetryTimeout); /* set the non-peer mode to active during peering */ - ieee80211_mps_local_status_update(sdata); + changed |= ieee80211_mps_local_status_update(sdata); spin_unlock_bh(&sta->lock); mesh_plink_frame_tx(sdata, @@ -978,7 +981,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m mpl_dbg(sdata, "Mesh plink with %pM ESTABLISHED\n", sta->sta.addr); ieee80211_mps_sta_status_update(sta); - ieee80211_mps_set_sta_local_pm(sta, + changed |= ieee80211_mps_set_sta_local_pm(sta, mshcfg->power_mode); break; default: @@ -1020,8 +1023,8 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m WLAN_SP_MESH_PEERING_CONFIRM, sta->sta.addr, llid, plid, 0); ieee80211_mps_sta_status_update(sta); - ieee80211_mps_set_sta_local_pm(sta, - mshcfg->power_mode); + changed |= ieee80211_mps_set_sta_local_pm(sta, + mshcfg->power_mode); break; default: spin_unlock_bh(&sta->lock); diff --git a/net/mac80211/mesh_ps.c b/net/mac80211/mesh_ps.c index b677962525ed..3b7bfc01ee36 100644 --- a/net/mac80211/mesh_ps.c +++ b/net/mac80211/mesh_ps.c @@ -74,14 +74,17 @@ static void mps_qos_null_tx(struct sta_info *sta) * @sdata: local mesh subif * * sets the non-peer power mode and triggers the driver PS (re-)configuration + * Return BSS_CHANGED_BEACON if a beacon update is necessary. */ -void ieee80211_mps_local_status_update(struct ieee80211_sub_if_data *sdata) +u32 ieee80211_mps_local_status_update(struct ieee80211_sub_if_data *sdata) { struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; struct sta_info *sta; bool peering = false; int light_sleep_cnt = 0; int deep_sleep_cnt = 0; + u32 changed = 0; + enum nl80211_mesh_power_mode nonpeer_pm; rcu_read_lock(); list_for_each_entry_rcu(sta, &sdata->local->sta_list, list) { @@ -115,17 +118,26 @@ void ieee80211_mps_local_status_update(struct ieee80211_sub_if_data *sdata) */ if (peering) { mps_dbg(sdata, "setting non-peer PM to active for peering\n"); - ifmsh->nonpeer_pm = NL80211_MESH_POWER_ACTIVE; + nonpeer_pm = NL80211_MESH_POWER_ACTIVE; } else if (light_sleep_cnt || deep_sleep_cnt) { mps_dbg(sdata, "setting non-peer PM to deep sleep\n"); - ifmsh->nonpeer_pm = NL80211_MESH_POWER_DEEP_SLEEP; + nonpeer_pm = NL80211_MESH_POWER_DEEP_SLEEP; } else { mps_dbg(sdata, "setting non-peer PM to user value\n"); - ifmsh->nonpeer_pm = ifmsh->mshcfg.power_mode; + nonpeer_pm = ifmsh->mshcfg.power_mode; } + /* need update if sleep counts move between 0 and non-zero */ + if (ifmsh->nonpeer_pm != nonpeer_pm || + !ifmsh->ps_peers_light_sleep != !light_sleep_cnt || + !ifmsh->ps_peers_deep_sleep != !deep_sleep_cnt) + changed = BSS_CHANGED_BEACON; + + ifmsh->nonpeer_pm = nonpeer_pm; ifmsh->ps_peers_light_sleep = light_sleep_cnt; ifmsh->ps_peers_deep_sleep = deep_sleep_cnt; + + return changed; } /** @@ -133,9 +145,10 @@ void ieee80211_mps_local_status_update(struct ieee80211_sub_if_data *sdata) * * @sta: mesh STA * @pm: the power mode to set + * Return BSS_CHANGED_BEACON if a beacon update is in order. */ -void ieee80211_mps_set_sta_local_pm(struct sta_info *sta, - enum nl80211_mesh_power_mode pm) +u32 ieee80211_mps_set_sta_local_pm(struct sta_info *sta, + enum nl80211_mesh_power_mode pm) { struct ieee80211_sub_if_data *sdata = sta->sdata; @@ -151,7 +164,7 @@ void ieee80211_mps_set_sta_local_pm(struct sta_info *sta, if (sta->plink_state == NL80211_PLINK_ESTAB) mps_qos_null_tx(sta); - ieee80211_mps_local_status_update(sdata); + return ieee80211_mps_local_status_update(sdata); } /** From cab1c7fd8024ce896119535b5b067224b0b699aa Mon Sep 17 00:00:00 2001 From: Wojciech Dubowik Date: Thu, 14 Feb 2013 14:08:37 +0100 Subject: [PATCH 176/209] mac80211: fix ieee80211_sta_tx_notify for nullfunc MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Function ieee80211_sta_reset_conn_monitor has been resetting probe_send_count too early and nullfunc check was never called after succesfull ack. Reported-by: Magnus Cederlöf Tested-by: Magnus Cederlöf Signed-off-by: Wojciech Dubowik Signed-off-by: Johannes Berg --- net/mac80211/mlme.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 7d4cde7af98e..c156573ea3d0 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1637,17 +1637,18 @@ void ieee80211_sta_tx_notify(struct ieee80211_sub_if_data *sdata, if (!ieee80211_is_data(hdr->frame_control)) return; - if (ack) - ieee80211_sta_reset_conn_monitor(sdata); - if (ieee80211_is_nullfunc(hdr->frame_control) && sdata->u.mgd.probe_send_count > 0) { if (ack) - sdata->u.mgd.probe_send_count = 0; + ieee80211_sta_reset_conn_monitor(sdata); else sdata->u.mgd.nullfunc_failed = true; ieee80211_queue_work(&sdata->local->hw, &sdata->work); + return; } + + if (ack) + ieee80211_sta_reset_conn_monitor(sdata); } static void ieee80211_mgd_probe_ap_send(struct ieee80211_sub_if_data *sdata) From 89afe614c0c737fd40eda1f8c8ef686246cf3cb6 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 13 Feb 2013 15:39:57 +0100 Subject: [PATCH 177/209] mac80211: fix auth/assoc timeout handling In my commit 1672c0e31917f49d31d30d79067103432bc20cc7 ("mac80211: start auth/assoc timeout on frame status") I broke auth/assoc timeout handling: in case we wait for the TX status, it now leaves the timeout field set to 0, which is a valid time and can compare as being before now ("jiffies"). Thus, if the work struct runs for some other reason, the auth/assoc is treated as having timed out. Fix this by introducing a separate "timeout_started" variable that tracks whether the timeout has started and is checked before timing out. Additionally, for proper TX status handling the change requires that the skb->dev pointer is set up for all the frames, so set it up for all frames in mac80211. Reported-by: Wojciech Dubowik Tested-by: Wojciech Dubowik Signed-off-by: Johannes Berg --- net/mac80211/ieee80211_i.h | 2 ++ net/mac80211/mlme.c | 23 +++++++++++++++++++---- net/mac80211/sta_info.c | 2 ++ net/mac80211/tx.c | 2 ++ 4 files changed, 25 insertions(+), 4 deletions(-) diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 0e0a9776be39..52bf954ef61c 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -343,6 +343,7 @@ struct ieee80211_mgd_auth_data { u8 key[WLAN_KEY_LEN_WEP104]; u8 key_len, key_idx; bool done; + bool timeout_started; u16 sae_trans, sae_status; size_t data_len; @@ -364,6 +365,7 @@ struct ieee80211_mgd_assoc_data { bool wmm, uapsd; bool have_beacon, need_beacon; bool synced; + bool timeout_started; u8 ap_ht_param; diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index c156573ea3d0..a7fb276d87cb 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -2000,6 +2000,7 @@ ieee80211_rx_mgmt_auth(struct ieee80211_sub_if_data *sdata, sdata_info(sdata, "authenticated\n"); ifmgd->auth_data->done = true; ifmgd->auth_data->timeout = jiffies + IEEE80211_AUTH_WAIT_ASSOC; + ifmgd->auth_data->timeout_started = true; run_again(ifmgd, ifmgd->auth_data->timeout); if (ifmgd->auth_data->algorithm == WLAN_AUTH_SAE && @@ -2334,6 +2335,7 @@ ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata, "%pM rejected association temporarily; comeback duration %u TU (%u ms)\n", mgmt->sa, tu, ms); assoc_data->timeout = jiffies + msecs_to_jiffies(ms); + assoc_data->timeout_started = true; if (ms > IEEE80211_ASSOC_TIMEOUT) run_again(ifmgd, assoc_data->timeout); return RX_MGMT_NONE; @@ -2457,6 +2459,7 @@ static void ieee80211_rx_mgmt_probe_resp(struct ieee80211_sub_if_data *sdata, sdata_info(sdata, "direct probe responded\n"); ifmgd->auth_data->tries = 0; ifmgd->auth_data->timeout = jiffies; + ifmgd->auth_data->timeout_started = true; run_again(ifmgd, ifmgd->auth_data->timeout); } } @@ -2542,6 +2545,7 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, } /* continue assoc process */ ifmgd->assoc_data->timeout = jiffies; + ifmgd->assoc_data->timeout_started = true; run_again(ifmgd, ifmgd->assoc_data->timeout); return; } @@ -2934,7 +2938,10 @@ static int ieee80211_probe_auth(struct ieee80211_sub_if_data *sdata) if (!(local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS)) { auth_data->timeout = jiffies + IEEE80211_AUTH_TIMEOUT; + ifmgd->auth_data->timeout_started = true; run_again(ifmgd, auth_data->timeout); + } else { + auth_data->timeout_started = false; } return 0; @@ -2968,7 +2975,10 @@ static int ieee80211_do_assoc(struct ieee80211_sub_if_data *sdata) if (!(local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS)) { assoc_data->timeout = jiffies + IEEE80211_ASSOC_TIMEOUT; + assoc_data->timeout_started = true; run_again(&sdata->u.mgd, assoc_data->timeout); + } else { + assoc_data->timeout_started = false; } return 0; @@ -3007,6 +3017,7 @@ void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata) } else { ifmgd->auth_data->timeout = jiffies - 1; } + ifmgd->auth_data->timeout_started = true; } else if (ifmgd->assoc_data && (ieee80211_is_assoc_req(fc) || ieee80211_is_reassoc_req(fc))) { @@ -3017,10 +3028,11 @@ void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata) } else { ifmgd->assoc_data->timeout = jiffies - 1; } + ifmgd->assoc_data->timeout_started = true; } } - if (ifmgd->auth_data && + if (ifmgd->auth_data && ifmgd->auth_data->timeout_started && time_after(jiffies, ifmgd->auth_data->timeout)) { if (ifmgd->auth_data->done) { /* @@ -3039,10 +3051,10 @@ void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata) cfg80211_send_auth_timeout(sdata->dev, bssid); mutex_lock(&ifmgd->mtx); } - } else if (ifmgd->auth_data) + } else if (ifmgd->auth_data && ifmgd->auth_data->timeout_started) run_again(ifmgd, ifmgd->auth_data->timeout); - if (ifmgd->assoc_data && + if (ifmgd->assoc_data && ifmgd->assoc_data->timeout_started && time_after(jiffies, ifmgd->assoc_data->timeout)) { if ((ifmgd->assoc_data->need_beacon && !ifmgd->assoc_data->have_beacon) || @@ -3057,7 +3069,7 @@ void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata) cfg80211_send_assoc_timeout(sdata->dev, bssid); mutex_lock(&ifmgd->mtx); } - } else if (ifmgd->assoc_data) + } else if (ifmgd->assoc_data && ifmgd->assoc_data->timeout_started) run_again(ifmgd, ifmgd->assoc_data->timeout); if (ifmgd->flags & (IEEE80211_STA_BEACON_POLL | @@ -4032,6 +4044,7 @@ int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata, sdata_info(sdata, "waiting for beacon from %pM\n", ifmgd->bssid); assoc_data->timeout = TU_TO_EXP_TIME(req->bss->beacon_interval); + assoc_data->timeout_started = true; assoc_data->need_beacon = true; } else if (beacon_ies) { const u8 *tim_ie = cfg80211_find_ie(WLAN_EID_TIM, @@ -4047,6 +4060,7 @@ int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata, } assoc_data->have_beacon = true; assoc_data->timeout = jiffies; + assoc_data->timeout_started = true; if (local->hw.flags & IEEE80211_HW_TIMING_BEACON_ONLY) { sdata->vif.bss_conf.sync_tsf = beacon_ies->tsf; @@ -4056,6 +4070,7 @@ int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata, } } else { assoc_data->timeout = jiffies; + assoc_data->timeout_started = true; } rcu_read_unlock(); diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c index 19db20a58e23..fb3b5865fc39 100644 --- a/net/mac80211/sta_info.c +++ b/net/mac80211/sta_info.c @@ -1120,6 +1120,8 @@ static void ieee80211_send_null_response(struct ieee80211_sub_if_data *sdata, drv_allow_buffered_frames(local, sta, BIT(tid), 1, reason, false); + skb->dev = sdata->dev; + rcu_read_lock(); chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); if (WARN_ON(!chanctx_conf)) { diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 71385bfc15d6..f4c89f506e9d 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -2818,6 +2818,8 @@ void __ieee80211_tx_skb_tid_band(struct ieee80211_sub_if_data *sdata, skb_set_queue_mapping(skb, ac); skb->priority = tid; + skb->dev = sdata->dev; + /* * The other path calling ieee80211_xmit is from the tasklet, * and while we can handle concurrent transmissions locking From 5bbe754d9ecc4a09994ecd0cf3b167224e114da5 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 13 Feb 2013 13:50:51 +0100 Subject: [PATCH 178/209] mac80211: don't call bss_info_changed on p2p-device/monitor Since the idle decision rework, mac80211 started calling bss_info_changed() for the driver's monitor interface, which causes a crash for iwlwifi, but drivers generally don't expect this to happen. Therefore, avoid it. While at it, also prevent calling it in such cases and only print a warning. For the P2P Device interface the idle will no longer be called (no channel context), so also prevent that and warn on it. Reported-by: Chaitanya Signed-off-by: Johannes Berg --- net/mac80211/chan.c | 10 ++++++++-- net/mac80211/driver-ops.h | 17 ++++++++++------- 2 files changed, 18 insertions(+), 9 deletions(-) diff --git a/net/mac80211/chan.c b/net/mac80211/chan.c index 2e6faeda22ad..d91ccfcaa6d1 100644 --- a/net/mac80211/chan.c +++ b/net/mac80211/chan.c @@ -137,7 +137,10 @@ static int ieee80211_assign_vif_chanctx(struct ieee80211_sub_if_data *sdata, ieee80211_recalc_txpower(sdata); sdata->vif.bss_conf.idle = false; - ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_IDLE); + + if (sdata->vif.type != NL80211_IFTYPE_P2P_DEVICE && + sdata->vif.type != NL80211_IFTYPE_MONITOR) + ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_IDLE); return 0; } @@ -186,7 +189,10 @@ static void ieee80211_unassign_vif_chanctx(struct ieee80211_sub_if_data *sdata, rcu_assign_pointer(sdata->vif.chanctx_conf, NULL); sdata->vif.bss_conf.idle = true; - ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_IDLE); + + if (sdata->vif.type != NL80211_IFTYPE_P2P_DEVICE && + sdata->vif.type != NL80211_IFTYPE_MONITOR) + ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_IDLE); drv_unassign_vif_chanctx(local, sdata, ctx); diff --git a/net/mac80211/driver-ops.h b/net/mac80211/driver-ops.h index 2b08b9982d06..ee56d0779d8b 100644 --- a/net/mac80211/driver-ops.h +++ b/net/mac80211/driver-ops.h @@ -207,13 +207,16 @@ static inline void drv_bss_info_changed(struct ieee80211_local *local, { might_sleep(); - WARN_ON_ONCE(changed & (BSS_CHANGED_BEACON | - BSS_CHANGED_BEACON_ENABLED) && - sdata->vif.type != NL80211_IFTYPE_AP && - sdata->vif.type != NL80211_IFTYPE_ADHOC && - sdata->vif.type != NL80211_IFTYPE_MESH_POINT); - WARN_ON_ONCE(sdata->vif.type == NL80211_IFTYPE_P2P_DEVICE && - changed & ~BSS_CHANGED_IDLE); + if (WARN_ON_ONCE(changed & (BSS_CHANGED_BEACON | + BSS_CHANGED_BEACON_ENABLED) && + sdata->vif.type != NL80211_IFTYPE_AP && + sdata->vif.type != NL80211_IFTYPE_ADHOC && + sdata->vif.type != NL80211_IFTYPE_MESH_POINT)) + return; + + if (WARN_ON_ONCE(sdata->vif.type == NL80211_IFTYPE_P2P_DEVICE || + sdata->vif.type == NL80211_IFTYPE_MONITOR)) + return; check_sdata_in_driver(sdata); From 5b36ebd8249f403c7edf7cf68d68e9a0d0f55243 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 13 Feb 2013 14:21:45 +0100 Subject: [PATCH 179/209] mac80211: always unblock CSA queue stop when disconnecting In some cases when disconnecting after (or during?) CSA the queues might not recover, and then the only way to recover is reloading the module. Fix this by always unblocking the queue CSA reason when disconnecting. Cc: stable@vger.kernel.org Reported-by: Jan-Michael Brummer Signed-off-by: Johannes Berg --- net/mac80211/mlme.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index a7fb276d87cb..99be3b61a225 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1819,6 +1819,8 @@ static void __ieee80211_disconnect(struct ieee80211_sub_if_data *sdata) WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, true, frame_buf); ifmgd->flags &= ~IEEE80211_STA_CSA_RECEIVED; + ieee80211_wake_queues_by_reason(&sdata->local->hw, + IEEE80211_QUEUE_STOP_REASON_CSA); mutex_unlock(&ifmgd->mtx); /* @@ -1859,8 +1861,6 @@ static void ieee80211_csa_connection_drop_work(struct work_struct *work) container_of(work, struct ieee80211_sub_if_data, u.mgd.csa_connection_drop_work); - ieee80211_wake_queues_by_reason(&sdata->local->hw, - IEEE80211_QUEUE_STOP_REASON_CSA); __ieee80211_disconnect(sdata); } From 441a33baf1805861354fb9e3149c000311b6996f Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 12 Feb 2013 16:27:04 +0100 Subject: [PATCH 180/209] mac80211: don't pick up WPA vendor IE There's no use for it, WPA is entirely handled in wpa_supplicant in userspace, so don't pick the IE. Signed-off-by: Johannes Berg --- net/mac80211/ieee80211_i.h | 2 -- net/mac80211/util.c | 6 +----- 2 files changed, 1 insertion(+), 7 deletions(-) diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 52bf954ef61c..8f9564460cb0 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1175,7 +1175,6 @@ struct ieee802_11_elems { struct ieee80211_tim_ie *tim; u8 *ibss_params; u8 *challenge; - u8 *wpa; u8 *rsn; u8 *erp_info; u8 *ext_supp_rates; @@ -1208,7 +1207,6 @@ struct ieee802_11_elems { u8 tim_len; u8 ibss_params_len; u8 challenge_len; - u8 wpa_len; u8 rsn_len; u8 erp_info_len; u8 ext_supp_rates_len; diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 218cb52f2b59..b231bc2ed740 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -739,11 +739,7 @@ u32 ieee802_11_parse_elems_crc(u8 *start, size_t len, if (calc_crc) crc = crc32_be(crc, pos - 2, elen + 2); - if (pos[3] == 1) { - /* OUI Type 1 - WPA IE */ - elems->wpa = pos; - elems->wpa_len = elen; - } else if (elen >= 5 && pos[3] == 2) { + if (elen >= 5 && pos[3] == 2) { /* OUI Type 2 - WMM IE */ if (pos[4] == 0) { elems->wmm_info = pos; From 65f704a52ec5db356c58f8ba53a31d3aef02737f Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 13 Feb 2013 17:39:53 +0100 Subject: [PATCH 181/209] mac80211: use spin_lock_bh() for tim_lock There's no need to use _irqsave() as the lock is never used in interrupt context. This also fixes a problem in the iwlwifi MVM driver that calls spin_unlock_bh() within its set_tim() callback. Signed-off-by: Johannes Berg --- net/mac80211/sta_info.c | 5 ++--- net/mac80211/tx.c | 6 ++---- 2 files changed, 4 insertions(+), 7 deletions(-) diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c index fb3b5865fc39..0794b9018ed4 100644 --- a/net/mac80211/sta_info.c +++ b/net/mac80211/sta_info.c @@ -571,7 +571,6 @@ void sta_info_recalc_tim(struct sta_info *sta) { struct ieee80211_local *local = sta->local; struct ps_data *ps; - unsigned long flags; bool indicate_tim = false; u8 ignore_for_tim = sta->sta.uapsd_queues; int ac; @@ -628,7 +627,7 @@ void sta_info_recalc_tim(struct sta_info *sta) } done: - spin_lock_irqsave(&local->tim_lock, flags); + spin_lock_bh(&local->tim_lock); if (indicate_tim) __bss_tim_set(ps->tim, id); @@ -641,7 +640,7 @@ void sta_info_recalc_tim(struct sta_info *sta) local->tim_in_locked_section = false; } - spin_unlock_irqrestore(&local->tim_lock, flags); + spin_unlock_bh(&local->tim_lock); } static bool sta_info_buffer_expired(struct sta_info *sta, struct sk_buff *skb) diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index f4c89f506e9d..7d8c629f1e6a 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -2364,11 +2364,9 @@ static int ieee80211_beacon_add_tim(struct ieee80211_sub_if_data *sdata, if (local->tim_in_locked_section) { __ieee80211_beacon_add_tim(sdata, ps, skb); } else { - unsigned long flags; - - spin_lock_irqsave(&local->tim_lock, flags); + spin_lock(&local->tim_lock); __ieee80211_beacon_add_tim(sdata, ps, skb); - spin_unlock_irqrestore(&local->tim_lock, flags); + spin_unlock(&local->tim_lock); } return 0; From 03395003bf8ac813b1a0ac9299b3496484caf228 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 13 Feb 2013 18:03:00 +0100 Subject: [PATCH 182/209] mac80211: use spin_lock_bh() for TKIP lock Since no driver calls the TKIP functions from interrupt context, there's no need to use spin_lock_irqsave(). Just use spin_lock_bh() (and spin_lock() in the TX path where we're in a BH or they're already disabled.) Signed-off-by: Johannes Berg --- net/mac80211/tkip.c | 10 ++++------ net/mac80211/wpa.c | 5 ++--- 2 files changed, 6 insertions(+), 9 deletions(-) diff --git a/net/mac80211/tkip.c b/net/mac80211/tkip.c index 57e14d59e12f..3ed801d90f1e 100644 --- a/net/mac80211/tkip.c +++ b/net/mac80211/tkip.c @@ -177,12 +177,11 @@ void ieee80211_get_tkip_p1k_iv(struct ieee80211_key_conf *keyconf, struct ieee80211_key *key = (struct ieee80211_key *) container_of(keyconf, struct ieee80211_key, conf); struct tkip_ctx *ctx = &key->u.tkip.tx; - unsigned long flags; - spin_lock_irqsave(&key->u.tkip.txlock, flags); + spin_lock_bh(&key->u.tkip.txlock); ieee80211_compute_tkip_p1k(key, iv32); memcpy(p1k, ctx->p1k, sizeof(ctx->p1k)); - spin_unlock_irqrestore(&key->u.tkip.txlock, flags); + spin_unlock_bh(&key->u.tkip.txlock); } EXPORT_SYMBOL(ieee80211_get_tkip_p1k_iv); @@ -208,12 +207,11 @@ void ieee80211_get_tkip_p2k(struct ieee80211_key_conf *keyconf, const u8 *data = (u8 *)hdr + ieee80211_hdrlen(hdr->frame_control); u32 iv32 = get_unaligned_le32(&data[4]); u16 iv16 = data[2] | (data[0] << 8); - unsigned long flags; - spin_lock_irqsave(&key->u.tkip.txlock, flags); + spin_lock_bh(&key->u.tkip.txlock); ieee80211_compute_tkip_p1k(key, iv32); tkip_mixing_phase2(tk, ctx, iv16, p2k); - spin_unlock_irqrestore(&key->u.tkip.txlock, flags); + spin_unlock_bh(&key->u.tkip.txlock); } EXPORT_SYMBOL(ieee80211_get_tkip_p2k); diff --git a/net/mac80211/wpa.c b/net/mac80211/wpa.c index c175ee866ff4..c7c6d644486f 100644 --- a/net/mac80211/wpa.c +++ b/net/mac80211/wpa.c @@ -181,7 +181,6 @@ static int tkip_encrypt_skb(struct ieee80211_tx_data *tx, struct sk_buff *skb) struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; struct ieee80211_key *key = tx->key; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); - unsigned long flags; unsigned int hdrlen; int len, tail; u8 *pos; @@ -216,12 +215,12 @@ static int tkip_encrypt_skb(struct ieee80211_tx_data *tx, struct sk_buff *skb) return 0; /* Increase IV for the frame */ - spin_lock_irqsave(&key->u.tkip.txlock, flags); + spin_lock(&key->u.tkip.txlock); key->u.tkip.tx.iv16++; if (key->u.tkip.tx.iv16 == 0) key->u.tkip.tx.iv32++; pos = ieee80211_tkip_add_iv(pos, key); - spin_unlock_irqrestore(&key->u.tkip.txlock, flags); + spin_unlock(&key->u.tkip.txlock); /* hwaccel - with software IV */ if (info->control.hw_key) From 4a34215ef7487b1cbd783e7cc485eb03de893bd0 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 7 Feb 2013 11:58:58 +0100 Subject: [PATCH 183/209] mac80211: pass station to ieee80211_vht_cap_ie_to_sta_vht_cap Like with HT, make things a bit simpler in future patches by passing the station to ieee80211_vht_cap_ie_to_sta_vht_cap() instead of the vht_cap pointer. Also disable VHT here if HT isn't supported. Signed-off-by: Johannes Berg --- net/mac80211/cfg.c | 3 +-- net/mac80211/ieee80211_i.h | 3 ++- net/mac80211/mlme.c | 3 +-- net/mac80211/vht.c | 8 +++++--- 4 files changed, 9 insertions(+), 8 deletions(-) diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 9b179309e073..9c9496d01120 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1257,8 +1257,7 @@ static int sta_apply_parameters(struct ieee80211_local *local, if (params->vht_capa) ieee80211_vht_cap_ie_to_sta_vht_cap(sdata, sband, - params->vht_capa, - &sta->sta.vht_cap); + params->vht_capa, sta); if (ieee80211_vif_is_mesh(&sdata->vif)) { #ifdef CONFIG_MAC80211_MESH diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 8f9564460cb0..9206d43ca572 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1430,7 +1430,8 @@ u8 ieee80211_mcs_to_chains(const struct ieee80211_mcs_info *mcs); void ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data *sdata, struct ieee80211_supported_band *sband, struct ieee80211_vht_cap *vht_cap_ie, - struct ieee80211_sta_vht_cap *vht_cap); + struct sta_info *sta); + /* Spectrum management */ void ieee80211_process_measurement_req(struct ieee80211_sub_if_data *sdata, struct ieee80211_mgmt *mgmt, diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index ac1374a8c30a..58b6e67ffbed 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -2217,8 +2217,7 @@ static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata, if (elems.vht_cap_elem && !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) ieee80211_vht_cap_ie_to_sta_vht_cap(sdata, sband, - elems.vht_cap_elem, - &sta->sta.vht_cap); + elems.vht_cap_elem, sta); rate_control_rate_init(sta); diff --git a/net/mac80211/vht.c b/net/mac80211/vht.c index f311388aeedf..1606aa165d5f 100644 --- a/net/mac80211/vht.c +++ b/net/mac80211/vht.c @@ -15,13 +15,15 @@ void ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data *sdata, struct ieee80211_supported_band *sband, struct ieee80211_vht_cap *vht_cap_ie, - struct ieee80211_sta_vht_cap *vht_cap) + struct sta_info *sta) { - if (WARN_ON_ONCE(!vht_cap)) - return; + struct ieee80211_sta_vht_cap *vht_cap = &sta->sta.vht_cap; memset(vht_cap, 0, sizeof(*vht_cap)); + if (!sta->sta.ht_cap.ht_supported) + return; + if (!vht_cap_ie || !sband->vht_cap.vht_supported) return; From e1a0c6b3a4b27ed5f21291d0bbee2167ec201ef5 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 7 Feb 2013 11:47:44 +0100 Subject: [PATCH 184/209] mac80211: stop toggling IEEE80211_HT_CAP_SUP_WIDTH_20_40 For VHT, many more bandwidth changes are possible. As a first step, stop toggling the IEEE80211_HT_CAP_SUP_WIDTH_20_40 flag in the HT capabilities and instead introduce a bandwidth field indicating the currently usable bandwidth to transmit to the station. Of course, make all drivers use it. To achieve this, make ieee80211_ht_cap_ie_to_sta_ht_cap() get the station as an argument, rather than the new capabilities, so it can set up the new bandwidth field. If the station is a VHT station and VHT bandwidth is in use, also set the bandwidth accordingly. Doing this allows us to get rid of the supports_40mhz flag as the HT capabilities now reflect the true capability instead of the current setting. While at it, also fix ieee80211_ht_cap_ie_to_sta_ht_cap() to not ignore HT cap overrides when MCS TX isn't supported (not that it really happens...) Signed-off-by: Johannes Berg --- drivers/net/wireless/ath/ath9k/rc.c | 2 +- drivers/net/wireless/iwlwifi/dvm/agn.h | 2 +- drivers/net/wireless/iwlwifi/dvm/rs.c | 6 +- drivers/net/wireless/iwlwifi/dvm/sta.c | 19 ++--- drivers/net/wireless/iwlwifi/mvm/rs.c | 24 ++---- drivers/net/wireless/rtlwifi/base.c | 7 +- drivers/net/wireless/rtlwifi/rc.c | 5 +- drivers/net/wireless/rtlwifi/rtl8192ce/hw.c | 6 +- drivers/net/wireless/rtlwifi/rtl8192ce/trx.c | 3 +- drivers/net/wireless/rtlwifi/rtl8192de/hw.c | 3 +- drivers/net/wireless/rtlwifi/rtl8192de/trx.c | 3 +- drivers/net/wireless/rtlwifi/rtl8192se/hw.c | 3 +- drivers/net/wireless/rtlwifi/rtl8192se/trx.c | 3 +- drivers/net/wireless/rtlwifi/rtl8723ae/hw.c | 3 +- drivers/net/wireless/rtlwifi/rtl8723ae/trx.c | 3 +- drivers/net/wireless/ti/wl18xx/main.c | 2 +- include/net/mac80211.h | 24 +++++- net/mac80211/cfg.c | 3 +- net/mac80211/ht.c | 82 ++++++++++++-------- net/mac80211/ibss.c | 21 ++--- net/mac80211/ieee80211_i.h | 5 +- net/mac80211/mesh_plink.c | 6 +- net/mac80211/mlme.c | 22 +++--- net/mac80211/rc80211_minstrel_ht.c | 19 +++-- net/mac80211/rx.c | 23 +++--- net/mac80211/sta_info.h | 4 - net/mac80211/vht.c | 39 ++++++++++ 27 files changed, 184 insertions(+), 158 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c index 714558d1ba78..54150b6a39ae 100644 --- a/drivers/net/wireless/ath/ath9k/rc.c +++ b/drivers/net/wireless/ath/ath9k/rc.c @@ -1204,7 +1204,7 @@ static u8 ath_rc_build_ht_caps(struct ath_softc *sc, struct ieee80211_sta *sta) caps |= WLAN_RC_TS_FLAG | WLAN_RC_DS_FLAG; else if (sta->ht_cap.mcs.rx_mask[1]) caps |= WLAN_RC_DS_FLAG; - if (sta->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) { + if (sta->bandwidth >= IEEE80211_STA_RX_BW_40) { caps |= WLAN_RC_40_FLAG; if (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) caps |= WLAN_RC_SGI_FLAG; diff --git a/drivers/net/wireless/iwlwifi/dvm/agn.h b/drivers/net/wireless/iwlwifi/dvm/agn.h index f41ae79e6bc0..41ec27cb6efe 100644 --- a/drivers/net/wireless/iwlwifi/dvm/agn.h +++ b/drivers/net/wireless/iwlwifi/dvm/agn.h @@ -338,7 +338,7 @@ int iwl_sta_update_ht(struct iwl_priv *priv, struct iwl_rxon_context *ctx, bool iwl_is_ht40_tx_allowed(struct iwl_priv *priv, struct iwl_rxon_context *ctx, - struct ieee80211_sta_ht_cap *ht_cap); + struct ieee80211_sta *sta); static inline int iwl_sta_id(struct ieee80211_sta *sta) { diff --git a/drivers/net/wireless/iwlwifi/dvm/rs.c b/drivers/net/wireless/iwlwifi/dvm/rs.c index a131227c49e9..b25de02964f9 100644 --- a/drivers/net/wireless/iwlwifi/dvm/rs.c +++ b/drivers/net/wireless/iwlwifi/dvm/rs.c @@ -1305,7 +1305,7 @@ static int rs_switch_to_mimo2(struct iwl_priv *priv, tbl->max_search = IWL_MAX_SEARCH; rate_mask = lq_sta->active_mimo2_rate; - if (iwl_is_ht40_tx_allowed(priv, ctx, &sta->ht_cap)) + if (iwl_is_ht40_tx_allowed(priv, ctx, sta)) tbl->is_ht40 = 1; else tbl->is_ht40 = 0; @@ -1361,7 +1361,7 @@ static int rs_switch_to_mimo3(struct iwl_priv *priv, tbl->max_search = IWL_MAX_11N_MIMO3_SEARCH; rate_mask = lq_sta->active_mimo3_rate; - if (iwl_is_ht40_tx_allowed(priv, ctx, &sta->ht_cap)) + if (iwl_is_ht40_tx_allowed(priv, ctx, sta)) tbl->is_ht40 = 1; else tbl->is_ht40 = 0; @@ -1410,7 +1410,7 @@ static int rs_switch_to_siso(struct iwl_priv *priv, tbl->max_search = IWL_MAX_SEARCH; rate_mask = lq_sta->active_siso_rate; - if (iwl_is_ht40_tx_allowed(priv, ctx, &sta->ht_cap)) + if (iwl_is_ht40_tx_allowed(priv, ctx, sta)) tbl->is_ht40 = 1; else tbl->is_ht40 = 0; diff --git a/drivers/net/wireless/iwlwifi/dvm/sta.c b/drivers/net/wireless/iwlwifi/dvm/sta.c index ab768045696b..6deab38c7aee 100644 --- a/drivers/net/wireless/iwlwifi/dvm/sta.c +++ b/drivers/net/wireless/iwlwifi/dvm/sta.c @@ -173,7 +173,7 @@ int iwl_send_add_sta(struct iwl_priv *priv, bool iwl_is_ht40_tx_allowed(struct iwl_priv *priv, struct iwl_rxon_context *ctx, - struct ieee80211_sta_ht_cap *ht_cap) + struct ieee80211_sta *sta) { if (!ctx->ht.enabled || !ctx->ht.is_40mhz) return false; @@ -183,20 +183,11 @@ bool iwl_is_ht40_tx_allowed(struct iwl_priv *priv, return false; #endif - /* - * Remainder of this function checks ht_cap, but if it's - * NULL then we can do HT40 (special case for RXON) - */ - if (!ht_cap) + /* special case for RXON */ + if (!sta) return true; - if (!ht_cap->ht_supported) - return false; - - if (!(ht_cap->cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40)) - return false; - - return true; + return sta->bandwidth >= IEEE80211_STA_RX_BW_40; } static void iwl_sta_calc_ht_flags(struct iwl_priv *priv, @@ -246,7 +237,7 @@ static void iwl_sta_calc_ht_flags(struct iwl_priv *priv, *flags |= cpu_to_le32( (u32)sta_ht_inf->ampdu_density << STA_FLG_AGG_MPDU_DENSITY_POS); - if (iwl_is_ht40_tx_allowed(priv, ctx, &sta->ht_cap)) + if (iwl_is_ht40_tx_allowed(priv, ctx, sta)) *flags |= STA_FLG_HT40_EN_MSK; } diff --git a/drivers/net/wireless/iwlwifi/mvm/rs.c b/drivers/net/wireless/iwlwifi/mvm/rs.c index 60a4291ca221..8ba36e5e4b67 100644 --- a/drivers/net/wireless/iwlwifi/mvm/rs.c +++ b/drivers/net/wireless/iwlwifi/mvm/rs.c @@ -1209,23 +1209,9 @@ static s32 rs_get_best_rate(struct iwl_mvm *mvm, return new_rate; } -static bool iwl_is_ht40_tx_allowed(struct iwl_mvm *mvm, - struct ieee80211_sta_ht_cap *ht_cap) +static bool iwl_is_ht40_tx_allowed(struct ieee80211_sta *sta) { - /* - * Remainder of this function checks ht_cap, but if it's - * NULL then we can do HT40 (special case for RXON) - */ - if (!ht_cap) - return true; - - if (!ht_cap->ht_supported) - return false; - - if (!(ht_cap->cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40)) - return false; - - return true; + return sta->bandwidth >= IEEE80211_STA_RX_BW_40; } /* @@ -1258,7 +1244,7 @@ static int rs_switch_to_mimo2(struct iwl_mvm *mvm, tbl->max_search = IWL_MAX_SEARCH; rate_mask = lq_sta->active_mimo2_rate; - if (iwl_is_ht40_tx_allowed(mvm, &sta->ht_cap)) + if (iwl_is_ht40_tx_allowed(sta)) tbl->is_ht40 = 1; else tbl->is_ht40 = 0; @@ -1311,7 +1297,7 @@ static int rs_switch_to_mimo3(struct iwl_mvm *mvm, tbl->max_search = IWL_MAX_11N_MIMO3_SEARCH; rate_mask = lq_sta->active_mimo3_rate; - if (iwl_is_ht40_tx_allowed(mvm, &sta->ht_cap)) + if (iwl_is_ht40_tx_allowed(sta)) tbl->is_ht40 = 1; else tbl->is_ht40 = 0; @@ -1356,7 +1342,7 @@ static int rs_switch_to_siso(struct iwl_mvm *mvm, tbl->max_search = IWL_MAX_SEARCH; rate_mask = lq_sta->active_siso_rate; - if (iwl_is_ht40_tx_allowed(mvm, &sta->ht_cap)) + if (iwl_is_ht40_tx_allowed(sta)) tbl->is_ht40 = 1; else tbl->is_ht40 = 0; diff --git a/drivers/net/wireless/rtlwifi/base.c b/drivers/net/wireless/rtlwifi/base.c index 4494d130b37c..84ea04dab303 100644 --- a/drivers/net/wireless/rtlwifi/base.c +++ b/drivers/net/wireless/rtlwifi/base.c @@ -523,8 +523,8 @@ static void _rtl_query_shortgi(struct ieee80211_hw *hw, if (mac->opmode == NL80211_IFTYPE_STATION) bw_40 = mac->bw_40; else if (mac->opmode == NL80211_IFTYPE_AP || - mac->opmode == NL80211_IFTYPE_ADHOC) - bw_40 = sta->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40; + mac->opmode == NL80211_IFTYPE_ADHOC) + bw_40 = sta->bandwidth >= IEEE80211_STA_RX_BW_40; if (bw_40 && sgi_40) tcb_desc->use_shortgi = true; @@ -634,8 +634,7 @@ static void _rtl_query_bandwidth_mode(struct ieee80211_hw *hw, return; if (mac->opmode == NL80211_IFTYPE_AP || mac->opmode == NL80211_IFTYPE_ADHOC) { - if (!(sta->ht_cap.ht_supported) || - !(sta->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40)) + if (sta->bandwidth == IEEE80211_STA_RX_BW_20) return; } else if (mac->opmode == NL80211_IFTYPE_STATION) { if (!mac->bw_40 || !(sta->ht_cap.ht_supported)) diff --git a/drivers/net/wireless/rtlwifi/rc.c b/drivers/net/wireless/rtlwifi/rc.c index 204f46c4510d..c12a866e1261 100644 --- a/drivers/net/wireless/rtlwifi/rc.c +++ b/drivers/net/wireless/rtlwifi/rc.c @@ -116,9 +116,8 @@ static void _rtl_rc_rate_set_series(struct rtl_priv *rtlpriv, if (txrc->short_preamble) rate->flags |= IEEE80211_TX_RC_USE_SHORT_PREAMBLE; if (mac->opmode == NL80211_IFTYPE_AP || - mac->opmode == NL80211_IFTYPE_ADHOC) { - if (sta && (sta->ht_cap.cap & - IEEE80211_HT_CAP_SUP_WIDTH_20_40)) + mac->opmode == NL80211_IFTYPE_ADHOC) { + if (sta && (sta->bandwidth >= IEEE80211_STA_RX_BW_40)) rate->flags |= IEEE80211_TX_RC_40_MHZ_WIDTH; } else { if (mac->bw_40) diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c b/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c index d1f34f6ffbdf..1b65db7fd651 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c +++ b/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c @@ -1846,9 +1846,9 @@ static void rtl92ce_update_hal_rate_mask(struct ieee80211_hw *hw, struct rtl_sta_info *sta_entry = NULL; u32 ratr_bitmap; u8 ratr_index; - u8 curtxbw_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) - ? 1 : 0; - u8 curshortgi_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ? + u8 curtxbw_40mhz = (sta->bandwidth >= IEEE80211_STA_RX_BW_40) ? 1 : 0; + u8 curshortgi_40mhz = curtxbw_40mhz && + (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ? 1 : 0; u8 curshortgi_20mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ? 1 : 0; diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/trx.c b/drivers/net/wireless/rtlwifi/rtl8192ce/trx.c index da0e9022a99a..b9b1a6e0b16e 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192ce/trx.c +++ b/drivers/net/wireless/rtlwifi/rtl8192ce/trx.c @@ -626,8 +626,7 @@ void rtl92ce_tx_fill_desc(struct ieee80211_hw *hw, } else if (mac->opmode == NL80211_IFTYPE_AP || mac->opmode == NL80211_IFTYPE_ADHOC) { if (sta) - bw_40 = sta->ht_cap.cap & - IEEE80211_HT_CAP_SUP_WIDTH_20_40; + bw_40 = sta->bandwidth >= IEEE80211_STA_RX_BW_40; } seq_number = (le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_SEQ) >> 4; diff --git a/drivers/net/wireless/rtlwifi/rtl8192de/hw.c b/drivers/net/wireless/rtlwifi/rtl8192de/hw.c index f4051f4f0390..aa5b42521bb4 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192de/hw.c +++ b/drivers/net/wireless/rtlwifi/rtl8192de/hw.c @@ -1970,8 +1970,7 @@ static void rtl92de_update_hal_rate_mask(struct ieee80211_hw *hw, struct rtl_sta_info *sta_entry = NULL; u32 ratr_bitmap; u8 ratr_index; - u8 curtxbw_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) - ? 1 : 0; + u8 curtxbw_40mhz = (sta->bandwidth >= IEEE80211_STA_RX_BW_40) ? 1 : 0; u8 curshortgi_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ? 1 : 0; u8 curshortgi_20mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ? diff --git a/drivers/net/wireless/rtlwifi/rtl8192de/trx.c b/drivers/net/wireless/rtlwifi/rtl8192de/trx.c index cdb570ffb4b5..941080e03c06 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192de/trx.c +++ b/drivers/net/wireless/rtlwifi/rtl8192de/trx.c @@ -574,8 +574,7 @@ void rtl92de_tx_fill_desc(struct ieee80211_hw *hw, } else if (mac->opmode == NL80211_IFTYPE_AP || mac->opmode == NL80211_IFTYPE_ADHOC) { if (sta) - bw_40 = sta->ht_cap.cap & - IEEE80211_HT_CAP_SUP_WIDTH_20_40; + bw_40 = sta->bandwidth >= IEEE80211_STA_RX_BW_40; } seq_number = (le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_SEQ) >> 4; rtl_get_tcb_desc(hw, info, sta, skb, ptcb_desc); diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/hw.c b/drivers/net/wireless/rtlwifi/rtl8192se/hw.c index 28526a7361f5..084e7773bce2 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192se/hw.c +++ b/drivers/net/wireless/rtlwifi/rtl8192se/hw.c @@ -2085,8 +2085,7 @@ static void rtl92se_update_hal_rate_mask(struct ieee80211_hw *hw, struct rtl_sta_info *sta_entry = NULL; u32 ratr_bitmap; u8 ratr_index = 0; - u8 curtxbw_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) - ? 1 : 0; + u8 curtxbw_40mhz = (sta->bandwidth >= IEEE80211_STA_RX_BW_40) ? 1 : 0; u8 curshortgi_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ? 1 : 0; u8 curshortgi_20mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ? diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/trx.c b/drivers/net/wireless/rtlwifi/rtl8192se/trx.c index f8431a3c2c9d..7b0a2e75b8b8 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192se/trx.c +++ b/drivers/net/wireless/rtlwifi/rtl8192se/trx.c @@ -621,8 +621,7 @@ void rtl92se_tx_fill_desc(struct ieee80211_hw *hw, } else if (mac->opmode == NL80211_IFTYPE_AP || mac->opmode == NL80211_IFTYPE_ADHOC) { if (sta) - bw_40 = sta->ht_cap.cap & - IEEE80211_HT_CAP_SUP_WIDTH_20_40; + bw_40 = sta->bandwidth >= IEEE80211_STA_RX_BW_40; } seq_number = (le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_SEQ) >> 4; diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/hw.c b/drivers/net/wireless/rtlwifi/rtl8723ae/hw.c index 149804816ac4..9a0c71c2e15e 100644 --- a/drivers/net/wireless/rtlwifi/rtl8723ae/hw.c +++ b/drivers/net/wireless/rtlwifi/rtl8723ae/hw.c @@ -1866,8 +1866,7 @@ static void rtl8723ae_update_hal_rate_mask(struct ieee80211_hw *hw, struct rtl_sta_info *sta_entry = NULL; u32 ratr_bitmap; u8 ratr_index; - u8 curtxbw_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) - ? 1 : 0; + u8 curtxbw_40mhz = (sta->bandwidth >= IEEE80211_STA_RX_BW_40) ? 1 : 0; u8 curshortgi_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ? 1 : 0; u8 curshortgi_20mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ? diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/trx.c b/drivers/net/wireless/rtlwifi/rtl8723ae/trx.c index b1fd2b328abf..ac081297db50 100644 --- a/drivers/net/wireless/rtlwifi/rtl8723ae/trx.c +++ b/drivers/net/wireless/rtlwifi/rtl8723ae/trx.c @@ -395,8 +395,7 @@ void rtl8723ae_tx_fill_desc(struct ieee80211_hw *hw, } else if (mac->opmode == NL80211_IFTYPE_AP || mac->opmode == NL80211_IFTYPE_ADHOC) { if (sta) - bw_40 = sta->ht_cap.cap & - IEEE80211_HT_CAP_SUP_WIDTH_20_40; + bw_40 = sta->bandwidth >= IEEE80211_STA_RX_BW_40; } seq_number = (le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_SEQ) >> 4; diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index a10b7a7a215a..da3ef1b10a9c 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -1374,7 +1374,7 @@ static void wl18xx_sta_rc_update(struct wl1271 *wl, struct ieee80211_sta *sta, u32 changed) { - bool wide = sta->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40; + bool wide = sta->bandwidth >= IEEE80211_STA_RX_BW_40; wl1271_debug(DEBUG_MAC80211, "mac80211 sta_rc_update wide %d", wide); diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 7241962f9f13..1e3b4f730397 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1196,6 +1196,24 @@ enum ieee80211_sta_state { IEEE80211_STA_AUTHORIZED, }; +/** + * enum ieee80211_sta_rx_bandwidth - station RX bandwidth + * @IEEE80211_STA_RX_BW_20: station can only receive 20 MHz + * @IEEE80211_STA_RX_BW_40: station can receive up to 40 MHz + * @IEEE80211_STA_RX_BW_80: station can receive up to 80 MHz + * @IEEE80211_STA_RX_BW_160: station can receive up to 160 MHz + * (including 80+80 MHz) + * + * Implementation note: 20 must be zero to be initialized + * correctly, the values must be sorted. + */ +enum ieee80211_sta_rx_bandwidth { + IEEE80211_STA_RX_BW_20 = 0, + IEEE80211_STA_RX_BW_40, + IEEE80211_STA_RX_BW_80, + IEEE80211_STA_RX_BW_160, +}; + /** * struct ieee80211_sta - station table entry * @@ -1218,6 +1236,7 @@ enum ieee80211_sta_state { * @uapsd_queues: bitmap of queues configured for uapsd. Only valid * if wme is supported. * @max_sp: max Service Period. Only valid if wme is supported. + * @bandwidth: current bandwidth the station can receive with */ struct ieee80211_sta { u32 supp_rates[IEEE80211_NUM_BANDS]; @@ -1228,6 +1247,7 @@ struct ieee80211_sta { bool wme; u8 uapsd_queues; u8 max_sp; + enum ieee80211_sta_rx_bandwidth bandwidth; /* must be last */ u8 drv_priv[0] __aligned(sizeof(void *)); @@ -2086,7 +2106,9 @@ enum ieee80211_frame_release_type { * enum ieee80211_rate_control_changed - flags to indicate what changed * * @IEEE80211_RC_BW_CHANGED: The bandwidth that can be used to transmit - * to this station changed. + * to this station changed. The actual bandwidth is in the station + * information -- for HT20/40 the IEEE80211_HT_CAP_SUP_WIDTH_20_40 + * flag changes, for HT and VHT the bandwidth field changes. * @IEEE80211_RC_SMPS_CHANGED: The SMPS state of the station changed. * @IEEE80211_RC_SUPP_RATES_CHANGED: The supported rate set of this peer * changed (in IBSS mode) due to discovering more information about diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 9c9496d01120..c3869ba42343 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1252,8 +1252,7 @@ static int sta_apply_parameters(struct ieee80211_local *local, if (params->ht_capa) ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband, - params->ht_capa, - &sta->sta.ht_cap); + params->ht_capa, sta); if (params->vht_capa) ieee80211_vht_cap_ie_to_sta_vht_cap(sdata, sband, diff --git a/net/mac80211/ht.c b/net/mac80211/ht.c index 9e7560becbbb..a64b4f0d373f 100644 --- a/net/mac80211/ht.c +++ b/net/mac80211/ht.c @@ -37,6 +37,9 @@ void ieee80211_apply_htcap_overrides(struct ieee80211_sub_if_data *sdata, u8 *smask = (u8 *)(&sdata->u.mgd.ht_capa_mask.mcs.rx_mask); int i; + if (!ht_cap->ht_supported) + return; + if (sdata->vif.type != NL80211_IFTYPE_STATION) { /* AP interfaces call this code when adding new stations, * so just silently ignore non station interfaces. @@ -89,22 +92,23 @@ void ieee80211_apply_htcap_overrides(struct ieee80211_sub_if_data *sdata, } -void ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_sub_if_data *sdata, +bool ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_sub_if_data *sdata, struct ieee80211_supported_band *sband, struct ieee80211_ht_cap *ht_cap_ie, - struct ieee80211_sta_ht_cap *ht_cap) + struct sta_info *sta) { + struct ieee80211_sta_ht_cap ht_cap; u8 ampdu_info, tx_mcs_set_cap; int i, max_tx_streams; + bool changed; + enum ieee80211_sta_rx_bandwidth bw; - BUG_ON(!ht_cap); - - memset(ht_cap, 0, sizeof(*ht_cap)); + memset(&ht_cap, 0, sizeof(ht_cap)); if (!ht_cap_ie || !sband->ht_cap.ht_supported) - return; + goto apply; - ht_cap->ht_supported = true; + ht_cap.ht_supported = true; /* * The bits listed in this expression should be @@ -112,7 +116,7 @@ void ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_sub_if_data *sdata, * advertises more then we can't use those thus * we mask them out. */ - ht_cap->cap = le16_to_cpu(ht_cap_ie->cap_info) & + ht_cap.cap = le16_to_cpu(ht_cap_ie->cap_info) & (sband->ht_cap.cap | ~(IEEE80211_HT_CAP_LDPC_CODING | IEEE80211_HT_CAP_SUP_WIDTH_20_40 | @@ -121,44 +125,30 @@ void ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_sub_if_data *sdata, IEEE80211_HT_CAP_SGI_40 | IEEE80211_HT_CAP_DSSSCCK40)); - /* Unset 40 MHz if we're not using a 40 MHz channel */ - switch (sdata->vif.bss_conf.chandef.width) { - case NL80211_CHAN_WIDTH_20_NOHT: - case NL80211_CHAN_WIDTH_20: - ht_cap->cap &= ~IEEE80211_HT_CAP_SGI_40; - ht_cap->cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; - break; - case NL80211_CHAN_WIDTH_40: - case NL80211_CHAN_WIDTH_80: - case NL80211_CHAN_WIDTH_80P80: - case NL80211_CHAN_WIDTH_160: - break; - } - /* * The STBC bits are asymmetric -- if we don't have * TX then mask out the peer's RX and vice versa. */ if (!(sband->ht_cap.cap & IEEE80211_HT_CAP_TX_STBC)) - ht_cap->cap &= ~IEEE80211_HT_CAP_RX_STBC; + ht_cap.cap &= ~IEEE80211_HT_CAP_RX_STBC; if (!(sband->ht_cap.cap & IEEE80211_HT_CAP_RX_STBC)) - ht_cap->cap &= ~IEEE80211_HT_CAP_TX_STBC; + ht_cap.cap &= ~IEEE80211_HT_CAP_TX_STBC; ampdu_info = ht_cap_ie->ampdu_params_info; - ht_cap->ampdu_factor = + ht_cap.ampdu_factor = ampdu_info & IEEE80211_HT_AMPDU_PARM_FACTOR; - ht_cap->ampdu_density = + ht_cap.ampdu_density = (ampdu_info & IEEE80211_HT_AMPDU_PARM_DENSITY) >> 2; /* own MCS TX capabilities */ tx_mcs_set_cap = sband->ht_cap.mcs.tx_params; /* Copy peer MCS TX capabilities, the driver might need them. */ - ht_cap->mcs.tx_params = ht_cap_ie->mcs.tx_params; + ht_cap.mcs.tx_params = ht_cap_ie->mcs.tx_params; /* can we TX with MCS rates? */ if (!(tx_mcs_set_cap & IEEE80211_HT_MCS_TX_DEFINED)) - return; + goto apply; /* Counting from 0, therefore +1 */ if (tx_mcs_set_cap & IEEE80211_HT_MCS_TX_RX_DIFF) @@ -176,25 +166,53 @@ void ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_sub_if_data *sdata, * - remainder are multiple spatial streams using unequal modulation */ for (i = 0; i < max_tx_streams; i++) - ht_cap->mcs.rx_mask[i] = + ht_cap.mcs.rx_mask[i] = sband->ht_cap.mcs.rx_mask[i] & ht_cap_ie->mcs.rx_mask[i]; if (tx_mcs_set_cap & IEEE80211_HT_MCS_TX_UNEQUAL_MODULATION) for (i = IEEE80211_HT_MCS_UNEQUAL_MODULATION_START_BYTE; i < IEEE80211_HT_MCS_MASK_LEN; i++) - ht_cap->mcs.rx_mask[i] = + ht_cap.mcs.rx_mask[i] = sband->ht_cap.mcs.rx_mask[i] & ht_cap_ie->mcs.rx_mask[i]; /* handle MCS rate 32 too */ if (sband->ht_cap.mcs.rx_mask[32/8] & ht_cap_ie->mcs.rx_mask[32/8] & 1) - ht_cap->mcs.rx_mask[32/8] |= 1; + ht_cap.mcs.rx_mask[32/8] |= 1; + apply: /* * If user has specified capability over-rides, take care * of that here. */ - ieee80211_apply_htcap_overrides(sdata, ht_cap); + ieee80211_apply_htcap_overrides(sdata, &ht_cap); + + changed = memcmp(&sta->sta.ht_cap, &ht_cap, sizeof(ht_cap)); + + memcpy(&sta->sta.ht_cap, &ht_cap, sizeof(ht_cap)); + + switch (sdata->vif.bss_conf.chandef.width) { + default: + WARN_ON_ONCE(1); + /* fall through */ + case NL80211_CHAN_WIDTH_20_NOHT: + case NL80211_CHAN_WIDTH_20: + bw = IEEE80211_STA_RX_BW_20; + break; + case NL80211_CHAN_WIDTH_40: + case NL80211_CHAN_WIDTH_80: + case NL80211_CHAN_WIDTH_80P80: + case NL80211_CHAN_WIDTH_160: + bw = ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 ? + IEEE80211_STA_RX_BW_40 : IEEE80211_STA_RX_BW_20; + break; + } + + if (bw != sta->sta.bandwidth) + changed = true; + sta->sta.bandwidth = bw; + + return changed; } void ieee80211_sta_tear_down_BA_sessions(struct sta_info *sta, diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index 2db1f2b90bfe..40b71dfcc79d 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -496,33 +496,26 @@ static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata, if (sta && elems->ht_operation && elems->ht_cap_elem && sdata->u.ibss.channel_type != NL80211_CHAN_NO_HT) { /* we both use HT */ - struct ieee80211_sta_ht_cap sta_ht_cap_new; + struct ieee80211_ht_cap htcap_ie; struct cfg80211_chan_def chandef; ieee80211_ht_oper_to_chandef(channel, elems->ht_operation, &chandef); - ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband, - elems->ht_cap_elem, - &sta_ht_cap_new); + memcpy(&htcap_ie, elems->ht_cap_elem, sizeof(htcap_ie)); /* * fall back to HT20 if we don't use or use * the other extension channel */ - if (chandef.width != NL80211_CHAN_WIDTH_40 || - cfg80211_get_chandef_type(&chandef) != + if (cfg80211_get_chandef_type(&chandef) != sdata->u.ibss.channel_type) - sta_ht_cap_new.cap &= - ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; + htcap_ie.cap_info &= + cpu_to_le16(~IEEE80211_HT_CAP_SUP_WIDTH_20_40); - if (memcmp(&sta->sta.ht_cap, &sta_ht_cap_new, - sizeof(sta_ht_cap_new))) { - memcpy(&sta->sta.ht_cap, &sta_ht_cap_new, - sizeof(sta_ht_cap_new)); - rates_updated = true; - } + rates_updated |= ieee80211_ht_cap_ie_to_sta_ht_cap( + sdata, sband, &htcap_ie, sta); } if (sta && rates_updated) { diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 9206d43ca572..6b41d7787a5a 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1384,10 +1384,10 @@ void ieee80211_purge_tx_queue(struct ieee80211_hw *hw, /* HT */ void ieee80211_apply_htcap_overrides(struct ieee80211_sub_if_data *sdata, struct ieee80211_sta_ht_cap *ht_cap); -void ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_sub_if_data *sdata, +bool ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_sub_if_data *sdata, struct ieee80211_supported_band *sband, struct ieee80211_ht_cap *ht_cap_ie, - struct ieee80211_sta_ht_cap *ht_cap); + struct sta_info *sta); void ieee80211_send_delba(struct ieee80211_sub_if_data *sdata, const u8 *da, u16 tid, u16 initiator, u16 reason_code); @@ -1431,6 +1431,7 @@ void ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data *sdata, struct ieee80211_supported_band *sband, struct ieee80211_vht_cap *vht_cap_ie, struct sta_info *sta); +enum ieee80211_sta_rx_bandwidth ieee80211_sta_cur_vht_bw(struct sta_info *sta); /* Spectrum management */ void ieee80211_process_measurement_req(struct ieee80211_sub_if_data *sdata, diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c index a4c7a7e98d14..7765139b24aa 100644 --- a/net/mac80211/mesh_plink.c +++ b/net/mac80211/mesh_plink.c @@ -373,8 +373,7 @@ static void mesh_sta_info_init(struct ieee80211_sub_if_data *sdata, if (elems->ht_cap_elem && sdata->vif.bss_conf.chandef.width != NL80211_CHAN_WIDTH_20_NOHT) ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband, - elems->ht_cap_elem, - &sta->sta.ht_cap); + elems->ht_cap_elem, sta); else memset(&sta->sta.ht_cap, 0, sizeof(sta->sta.ht_cap)); @@ -383,8 +382,7 @@ static void mesh_sta_info_init(struct ieee80211_sub_if_data *sdata, if (!(elems->ht_operation->ht_param & IEEE80211_HT_PARAM_CHAN_WIDTH_ANY)) - sta->sta.ht_cap.cap &= - ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; + sta->sta.bandwidth = IEEE80211_STA_RX_BW_20; ieee80211_ht_oper_to_chandef(sdata->vif.bss_conf.chandef.chan, elems->ht_operation, &chandef); if (sta->ch_width != chandef.width) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 58b6e67ffbed..be1147286801 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -219,19 +219,20 @@ static u32 ieee80211_config_ht_tx(struct ieee80211_sub_if_data *sdata, mutex_lock(&local->sta_mtx); sta = sta_info_get(sdata, bssid); - WARN_ON_ONCE(!sta); + if (WARN_ON_ONCE(!sta)) { + mutex_unlock(&local->sta_mtx); + return changed; + } - if (sta && !sta->supports_40mhz) + if (!(sta->sta.ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40)) disable_40 = true; - if (sta && (!reconfig || - (disable_40 != !(sta->sta.ht_cap.cap & - IEEE80211_HT_CAP_SUP_WIDTH_20_40)))) { - + if (!reconfig || + disable_40 != (sta->sta.bandwidth < IEEE80211_STA_RX_BW_40)) { if (disable_40) - sta->sta.ht_cap.cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; + sta->sta.bandwidth = IEEE80211_STA_RX_BW_20; else - sta->sta.ht_cap.cap |= IEEE80211_HT_CAP_SUP_WIDTH_20_40; + sta->sta.bandwidth = ieee80211_sta_cur_vht_bw(sta); rate_control_rate_update(local, sband, sta, IEEE80211_RC_BW_CHANGED); @@ -2210,10 +2211,7 @@ static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata, if (elems.ht_cap_elem && !(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband, - elems.ht_cap_elem, &sta->sta.ht_cap); - - sta->supports_40mhz = - sta->sta.ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40; + elems.ht_cap_elem, sta); if (elems.vht_cap_elem && !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) ieee80211_vht_cap_ie_to_sta_vht_cap(sdata, sband, diff --git a/net/mac80211/rc80211_minstrel_ht.c b/net/mac80211/rc80211_minstrel_ht.c index 6e35dcd2aa2f..6176c71d47ff 100644 --- a/net/mac80211/rc80211_minstrel_ht.c +++ b/net/mac80211/rc80211_minstrel_ht.c @@ -848,8 +848,6 @@ minstrel_ht_update_caps(void *priv, struct ieee80211_supported_band *sband, IEEE80211_HT_CAP_SM_PS_SHIFT; for (i = 0; i < ARRAY_SIZE(mi->groups); i++) { - u16 req = 0; - mi->groups[i].supported = 0; if (i == MINSTREL_CCK_GROUP) { minstrel_ht_update_cck(mp, mi, sband, sta); @@ -857,16 +855,17 @@ minstrel_ht_update_caps(void *priv, struct ieee80211_supported_band *sband, } if (minstrel_mcs_groups[i].flags & IEEE80211_TX_RC_SHORT_GI) { - if (minstrel_mcs_groups[i].flags & IEEE80211_TX_RC_40_MHZ_WIDTH) - req |= IEEE80211_HT_CAP_SGI_40; - else - req |= IEEE80211_HT_CAP_SGI_20; + if (minstrel_mcs_groups[i].flags & IEEE80211_TX_RC_40_MHZ_WIDTH) { + if (!(sta_cap & IEEE80211_HT_CAP_SGI_40)) + continue; + } else { + if (!(sta_cap & IEEE80211_HT_CAP_SGI_20)) + continue; + } } - if (minstrel_mcs_groups[i].flags & IEEE80211_TX_RC_40_MHZ_WIDTH) - req |= IEEE80211_HT_CAP_SUP_WIDTH_20_40; - - if ((sta_cap & req) != req) + if (minstrel_mcs_groups[i].flags & IEEE80211_TX_RC_40_MHZ_WIDTH && + sta->bandwidth < IEEE80211_STA_RX_BW_40) continue; /* Mark MCS > 7 as unsupported if STA is in static SMPS mode */ diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index b5f1bba7ffe1..8a861a50b12f 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -2410,25 +2410,20 @@ ieee80211_rx_h_action(struct ieee80211_rx_data *rx) case WLAN_HT_ACTION_NOTIFY_CHANWIDTH: { struct ieee80211_supported_band *sband; u8 chanwidth = mgmt->u.action.u.ht_notify_cw.chanwidth; - bool old_40mhz, new_40mhz; + enum ieee80211_sta_rx_bandwidth new_bw; /* If it doesn't support 40 MHz it can't change ... */ - if (!rx->sta->supports_40mhz) + if (!(rx->sta->sta.ht_cap.cap & + IEEE80211_HT_CAP_SUP_WIDTH_20_40)) goto handled; - old_40mhz = rx->sta->sta.ht_cap.cap & - IEEE80211_HT_CAP_SUP_WIDTH_20_40; - new_40mhz = chanwidth == IEEE80211_HT_CHANWIDTH_ANY; - - if (old_40mhz == new_40mhz) - goto handled; - - if (new_40mhz) - rx->sta->sta.ht_cap.cap |= - IEEE80211_HT_CAP_SUP_WIDTH_20_40; + if (chanwidth == IEEE80211_HT_CHANWIDTH_20MHZ) + new_bw = IEEE80211_STA_RX_BW_20; else - rx->sta->sta.ht_cap.cap &= - ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; + new_bw = ieee80211_sta_cur_vht_bw(rx->sta); + + if (rx->sta->sta.bandwidth == new_bw) + goto handled; sband = rx->local->hw.wiphy->bands[status->band]; diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h index 350578c396c0..03c42f8d39f0 100644 --- a/net/mac80211/sta_info.h +++ b/net/mac80211/sta_info.h @@ -296,8 +296,6 @@ struct sta_ampdu_mlme { * @sta: station information we share with the driver * @sta_state: duplicates information about station state (for debug) * @beacon_loss_count: number of times beacon loss has triggered - * @supports_40mhz: tracks whether the station advertised 40 MHz support - * as we overwrite its HT parameters with the currently used value * @rcu_head: RCU head used for freeing this station struct */ struct sta_info { @@ -403,8 +401,6 @@ struct sta_info { unsigned int lost_packets; unsigned int beacon_loss_count; - bool supports_40mhz; - /* keep last! */ struct ieee80211_sta sta; }; diff --git a/net/mac80211/vht.c b/net/mac80211/vht.c index 1606aa165d5f..0fc9a2fb8d53 100644 --- a/net/mac80211/vht.c +++ b/net/mac80211/vht.c @@ -27,6 +27,10 @@ void ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data *sdata, if (!vht_cap_ie || !sband->vht_cap.vht_supported) return; + /* A VHT STA must support 40 MHz */ + if (!(sta->sta.ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40)) + return; + vht_cap->vht_supported = true; vht_cap->cap = le32_to_cpu(vht_cap_ie->vht_cap_info); @@ -34,4 +38,39 @@ void ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data *sdata, /* Copy peer MCS info, the driver might need them. */ memcpy(&vht_cap->vht_mcs, &vht_cap_ie->supp_mcs, sizeof(struct ieee80211_vht_mcs_info)); + + sta->sta.bandwidth = ieee80211_sta_cur_vht_bw(sta); +} + +enum ieee80211_sta_rx_bandwidth ieee80211_sta_cur_vht_bw(struct sta_info *sta) +{ + struct ieee80211_sub_if_data *sdata = sta->sdata; + u32 cap = sta->sta.vht_cap.cap; + + if (!sta->sta.vht_cap.vht_supported) + return sta->sta.ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 ? + IEEE80211_STA_RX_BW_40 : IEEE80211_STA_RX_BW_20; + + /* TODO: handle VHT opmode notification data */ + + switch (sdata->vif.bss_conf.chandef.width) { + default: + WARN_ON_ONCE(1); + /* fall through */ + case NL80211_CHAN_WIDTH_20_NOHT: + case NL80211_CHAN_WIDTH_20: + case NL80211_CHAN_WIDTH_40: + return sta->sta.ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 ? + IEEE80211_STA_RX_BW_40 : IEEE80211_STA_RX_BW_20; + case NL80211_CHAN_WIDTH_160: + if (cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ) + return IEEE80211_STA_RX_BW_160; + /* fall through */ + case NL80211_CHAN_WIDTH_80P80: + if (cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ) + return IEEE80211_STA_RX_BW_160; + /* fall through */ + case NL80211_CHAN_WIDTH_80: + return IEEE80211_STA_RX_BW_80; + } } From 7bf9b9a0f0372d45b581f00173505fb76a9c5d23 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 27 Dec 2012 18:45:41 +0100 Subject: [PATCH 185/209] wireless: define operating mode action frame Define the action frame format, the VHT category and its action types and the field format and EID for operating mode notifications. The frame may be used outside of VHT context as well, so don't include "VHT" in the names. Signed-off-by: Johannes Berg --- include/linux/ieee80211.h | 37 +++++++++++++++++++++++++++++++++++++ 1 file changed, 37 insertions(+) diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 7e8a498efe6d..67c1a6c45837 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -714,6 +714,30 @@ enum ieee80211_ht_chanwidth_values { IEEE80211_HT_CHANWIDTH_ANY = 1, }; +/** + * enum ieee80211_opmode_bits - VHT operating mode field bits + * @IEEE80211_OPMODE_NOTIF_CHANWIDTH_MASK: channel width mask + * @IEEE80211_OPMODE_NOTIF_CHANWIDTH_20MHZ: 20 MHz channel width + * @IEEE80211_OPMODE_NOTIF_CHANWIDTH_40MHZ: 40 MHz channel width + * @IEEE80211_OPMODE_NOTIF_CHANWIDTH_80MHZ: 80 MHz channel width + * @IEEE80211_OPMODE_NOTIF_CHANWIDTH_160MHZ: 160 MHz or 80+80 MHz channel width + * @IEEE80211_OPMODE_NOTIF_RX_NSS_MASK: number of spatial streams mask + * (the NSS value is the value of this field + 1) + * @IEEE80211_OPMODE_NOTIF_RX_NSS_SHIFT: number of spatial streams shift + * @IEEE80211_OPMODE_NOTIF_RX_NSS_TYPE_BF: indicates streams in SU-MIMO PPDU + * using a beamforming steering matrix + */ +enum ieee80211_vht_opmode_bits { + IEEE80211_OPMODE_NOTIF_CHANWIDTH_MASK = 3, + IEEE80211_OPMODE_NOTIF_CHANWIDTH_20MHZ = 0, + IEEE80211_OPMODE_NOTIF_CHANWIDTH_40MHZ = 1, + IEEE80211_OPMODE_NOTIF_CHANWIDTH_80MHZ = 2, + IEEE80211_OPMODE_NOTIF_CHANWIDTH_160MHZ = 3, + IEEE80211_OPMODE_NOTIF_RX_NSS_MASK = 0x70, + IEEE80211_OPMODE_NOTIF_RX_NSS_SHIFT = 4, + IEEE80211_OPMODE_NOTIF_RX_NSS_TYPE_BF = 0x80, +}; + #define WLAN_SA_QUERY_TR_ID_LEN 2 struct ieee80211_mgmt { @@ -844,6 +868,10 @@ struct ieee80211_mgmt { __le16 capability; u8 variable[0]; } __packed tdls_discover_resp; + struct { + u8 action_code; + u8 operating_mode; + } __packed vht_opmode_notif; } u; } __packed action; } u; @@ -1598,6 +1626,7 @@ enum ieee80211_eid { WLAN_EID_VHT_CAPABILITY = 191, WLAN_EID_VHT_OPERATION = 192, + WLAN_EID_OPMODE_NOTIF = 199, /* 802.11ad */ WLAN_EID_NON_TX_BSSID_CAP = 83, @@ -1652,6 +1681,7 @@ enum ieee80211_category { WLAN_CATEGORY_WMM = 17, WLAN_CATEGORY_FST = 18, WLAN_CATEGORY_UNPROT_DMG = 20, + WLAN_CATEGORY_VHT = 21, WLAN_CATEGORY_VENDOR_SPECIFIC_PROTECTED = 126, WLAN_CATEGORY_VENDOR_SPECIFIC = 127, }; @@ -1677,6 +1707,13 @@ enum ieee80211_ht_actioncode { WLAN_HT_ACTION_ASEL_IDX_FEEDBACK = 7, }; +/* VHT action codes */ +enum ieee80211_vht_actioncode { + WLAN_VHT_ACTION_COMPRESSED_BF = 0, + WLAN_VHT_ACTION_GROUPID_MGMT = 1, + WLAN_VHT_ACTION_OPMODE_NOTIF = 2, +}; + /* Self Protected Action codes */ enum ieee80211_self_protected_actioncode { WLAN_SP_RESERVED = 0, From 8921d04e8df7475d733d853564bdb001e83bf33f Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 27 Dec 2012 18:26:42 +0100 Subject: [PATCH 186/209] mac80211: track number of spatial streams With VHT, a station can change the number of spatial streams it can receive on the fly, not unlike spatial multiplexing in HT. Prepare for that by tracking the maximum number of spatial streams it can receive when the connection is established. Signed-off-by: Johannes Berg --- include/net/mac80211.h | 5 +++++ net/mac80211/ieee80211_i.h | 1 + net/mac80211/rate.h | 2 ++ net/mac80211/vht.c | 41 ++++++++++++++++++++++++++++++++++++++ 4 files changed, 49 insertions(+) diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 1e3b4f730397..a608ab9879b4 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1237,6 +1237,10 @@ enum ieee80211_sta_rx_bandwidth { * if wme is supported. * @max_sp: max Service Period. Only valid if wme is supported. * @bandwidth: current bandwidth the station can receive with + * @rx_nss: in HT/VHT, the maximum number of spatial streams the + * station can receive at the moment, changed by operating mode + * notifications and capabilities. The value is only valid after + * the station moves to associated state. */ struct ieee80211_sta { u32 supp_rates[IEEE80211_NUM_BANDS]; @@ -1247,6 +1251,7 @@ struct ieee80211_sta { bool wme; u8 uapsd_queues; u8 max_sp; + u8 rx_nss; enum ieee80211_sta_rx_bandwidth bandwidth; /* must be last */ diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 6b41d7787a5a..3b13af4e6c49 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1432,6 +1432,7 @@ void ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data *sdata, struct ieee80211_vht_cap *vht_cap_ie, struct sta_info *sta); enum ieee80211_sta_rx_bandwidth ieee80211_sta_cur_vht_bw(struct sta_info *sta); +void ieee80211_sta_set_rx_nss(struct sta_info *sta); /* Spectrum management */ void ieee80211_process_measurement_req(struct ieee80211_sub_if_data *sdata, diff --git a/net/mac80211/rate.h b/net/mac80211/rate.h index 301386dabf88..d35a5dd3fb13 100644 --- a/net/mac80211/rate.h +++ b/net/mac80211/rate.h @@ -68,6 +68,8 @@ static inline void rate_control_rate_init(struct sta_info *sta) sband = local->hw.wiphy->bands[chanctx_conf->def.chan->band]; rcu_read_unlock(); + ieee80211_sta_set_rx_nss(sta); + ref->ops->rate_init(ref->priv, sband, ista, priv_sta); set_sta_flag(sta, WLAN_STA_RATE_CONTROL); } diff --git a/net/mac80211/vht.c b/net/mac80211/vht.c index 0fc9a2fb8d53..67436e3efbbd 100644 --- a/net/mac80211/vht.c +++ b/net/mac80211/vht.c @@ -74,3 +74,44 @@ enum ieee80211_sta_rx_bandwidth ieee80211_sta_cur_vht_bw(struct sta_info *sta) return IEEE80211_STA_RX_BW_80; } } + +void ieee80211_sta_set_rx_nss(struct sta_info *sta) +{ + u8 ht_rx_nss = 0, vht_rx_nss = 0; + + /* if we received a notification already don't overwrite it */ + if (sta->sta.rx_nss) + return; + + if (sta->sta.ht_cap.ht_supported) { + if (sta->sta.ht_cap.mcs.rx_mask[0]) + ht_rx_nss++; + if (sta->sta.ht_cap.mcs.rx_mask[1]) + ht_rx_nss++; + if (sta->sta.ht_cap.mcs.rx_mask[2]) + ht_rx_nss++; + if (sta->sta.ht_cap.mcs.rx_mask[3]) + ht_rx_nss++; + /* FIXME: consider rx_highest? */ + } + + if (sta->sta.vht_cap.vht_supported) { + int i; + u16 rx_mcs_map; + + rx_mcs_map = le16_to_cpu(sta->sta.vht_cap.vht_mcs.rx_mcs_map); + + for (i = 7; i >= 0; i--) { + u8 mcs = (rx_mcs_map >> (2 * i)) & 3; + + if (mcs != IEEE80211_VHT_MCS_NOT_SUPPORTED) { + vht_rx_nss = i + 1; + break; + } + } + /* FIXME: consider rx_highest? */ + } + + ht_rx_nss = max(ht_rx_nss, vht_rx_nss); + sta->sta.rx_nss = max_t(u8, 1, ht_rx_nss); +} From 0af83d3df5863224336a18c24a14fda542b712f5 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 27 Dec 2012 18:55:36 +0100 Subject: [PATCH 187/209] mac80211: handle VHT operating mode notification Handle the operating mode notification action frame. When the supported streams or the bandwidth change let the driver and rate control algorithm know. Signed-off-by: Johannes Berg --- include/linux/ieee80211.h | 1 + include/net/mac80211.h | 3 ++ net/mac80211/ht.c | 4 ++ net/mac80211/ieee80211_i.h | 3 ++ net/mac80211/rx.c | 30 ++++++++++++ net/mac80211/sta_info.h | 4 ++ net/mac80211/vht.c | 93 ++++++++++++++++++++++++++++++++++---- 7 files changed, 128 insertions(+), 10 deletions(-) diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 67c1a6c45837..12b5996533ec 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -1301,6 +1301,7 @@ struct ieee80211_vht_operation { #define IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_11454 0x00000002 #define IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ 0x00000004 #define IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ 0x00000008 +#define IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK 0x0000000C #define IEEE80211_VHT_CAP_RXLDPC 0x00000010 #define IEEE80211_VHT_CAP_SHORT_GI_80 0x00000020 #define IEEE80211_VHT_CAP_SHORT_GI_160 0x00000040 diff --git a/include/net/mac80211.h b/include/net/mac80211.h index a608ab9879b4..b7fb311e83f4 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -2118,11 +2118,14 @@ enum ieee80211_frame_release_type { * @IEEE80211_RC_SUPP_RATES_CHANGED: The supported rate set of this peer * changed (in IBSS mode) due to discovering more information about * the peer. + * @IEEE80211_RC_NSS_CHANGED: N_SS (number of spatial streams) was changed + * by the peer */ enum ieee80211_rate_control_changed { IEEE80211_RC_BW_CHANGED = BIT(0), IEEE80211_RC_SMPS_CHANGED = BIT(1), IEEE80211_RC_SUPP_RATES_CHANGED = BIT(2), + IEEE80211_RC_NSS_CHANGED = BIT(3), }; /** diff --git a/net/mac80211/ht.c b/net/mac80211/ht.c index a64b4f0d373f..797969bc26e1 100644 --- a/net/mac80211/ht.c +++ b/net/mac80211/ht.c @@ -212,6 +212,10 @@ bool ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_sub_if_data *sdata, changed = true; sta->sta.bandwidth = bw; + sta->cur_max_bandwidth = + ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 ? + IEEE80211_STA_RX_BW_40 : IEEE80211_STA_RX_BW_20; + return changed; } diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 3b13af4e6c49..4947c91c6c86 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1433,6 +1433,9 @@ void ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data *sdata, struct sta_info *sta); enum ieee80211_sta_rx_bandwidth ieee80211_sta_cur_vht_bw(struct sta_info *sta); void ieee80211_sta_set_rx_nss(struct sta_info *sta); +void ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata, + struct sta_info *sta, u8 opmode, + enum ieee80211_band band); /* Spectrum management */ void ieee80211_process_measurement_req(struct ieee80211_sub_if_data *sdata, diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 8a861a50b12f..1617e0bd4ca6 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -2435,6 +2435,36 @@ ieee80211_rx_h_action(struct ieee80211_rx_data *rx) goto invalid; } + break; + case WLAN_CATEGORY_VHT: + if (sdata->vif.type != NL80211_IFTYPE_STATION && + sdata->vif.type != NL80211_IFTYPE_MESH_POINT && + sdata->vif.type != NL80211_IFTYPE_AP_VLAN && + sdata->vif.type != NL80211_IFTYPE_AP && + sdata->vif.type != NL80211_IFTYPE_ADHOC) + break; + + /* verify action code is present */ + if (len < IEEE80211_MIN_ACTION_SIZE + 1) + goto invalid; + + switch (mgmt->u.action.u.vht_opmode_notif.action_code) { + case WLAN_VHT_ACTION_OPMODE_NOTIF: { + u8 opmode; + + /* verify opmode is present */ + if (len < IEEE80211_MIN_ACTION_SIZE + 2) + goto invalid; + + opmode = mgmt->u.action.u.vht_opmode_notif.operating_mode; + + ieee80211_vht_handle_opmode(rx->sdata, rx->sta, + opmode, status->band); + goto handled; + } + default: + break; + } break; case WLAN_CATEGORY_BACK: if (sdata->vif.type != NL80211_IFTYPE_STATION && diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h index 03c42f8d39f0..63dfdb5e91da 100644 --- a/net/mac80211/sta_info.h +++ b/net/mac80211/sta_info.h @@ -297,6 +297,8 @@ struct sta_ampdu_mlme { * @sta_state: duplicates information about station state (for debug) * @beacon_loss_count: number of times beacon loss has triggered * @rcu_head: RCU head used for freeing this station struct + * @cur_max_bandwidth: maximum bandwidth to use for TX to the station, + * taken from HT/VHT capabilities or VHT operating mode notification */ struct sta_info { /* General information, mostly static */ @@ -398,6 +400,8 @@ struct sta_info { } debugfs; #endif + enum ieee80211_sta_rx_bandwidth cur_max_bandwidth; + unsigned int lost_packets; unsigned int beacon_loss_count; diff --git a/net/mac80211/vht.c b/net/mac80211/vht.c index 67436e3efbbd..0951f74e7ff5 100644 --- a/net/mac80211/vht.c +++ b/net/mac80211/vht.c @@ -10,6 +10,7 @@ #include #include #include "ieee80211_i.h" +#include "rate.h" void ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data *sdata, @@ -39,6 +40,15 @@ void ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data *sdata, memcpy(&vht_cap->vht_mcs, &vht_cap_ie->supp_mcs, sizeof(struct ieee80211_vht_mcs_info)); + switch (vht_cap->cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK) { + case IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ: + case IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ: + sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_160; + break; + default: + sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_80; + } + sta->sta.bandwidth = ieee80211_sta_cur_vht_bw(sta); } @@ -46,12 +56,13 @@ enum ieee80211_sta_rx_bandwidth ieee80211_sta_cur_vht_bw(struct sta_info *sta) { struct ieee80211_sub_if_data *sdata = sta->sdata; u32 cap = sta->sta.vht_cap.cap; + enum ieee80211_sta_rx_bandwidth bw; - if (!sta->sta.vht_cap.vht_supported) - return sta->sta.ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 ? + if (!sta->sta.vht_cap.vht_supported) { + bw = sta->sta.ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 ? IEEE80211_STA_RX_BW_40 : IEEE80211_STA_RX_BW_20; - - /* TODO: handle VHT opmode notification data */ + goto check_max; + } switch (sdata->vif.bss_conf.chandef.width) { default: @@ -60,19 +71,31 @@ enum ieee80211_sta_rx_bandwidth ieee80211_sta_cur_vht_bw(struct sta_info *sta) case NL80211_CHAN_WIDTH_20_NOHT: case NL80211_CHAN_WIDTH_20: case NL80211_CHAN_WIDTH_40: - return sta->sta.ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 ? + bw = sta->sta.ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 ? IEEE80211_STA_RX_BW_40 : IEEE80211_STA_RX_BW_20; + break; case NL80211_CHAN_WIDTH_160: - if (cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ) - return IEEE80211_STA_RX_BW_160; + if ((cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK) == + IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ) { + bw = IEEE80211_STA_RX_BW_160; + break; + } /* fall through */ case NL80211_CHAN_WIDTH_80P80: - if (cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ) - return IEEE80211_STA_RX_BW_160; + if ((cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK) == + IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ) { + bw = IEEE80211_STA_RX_BW_160; + break; + } /* fall through */ case NL80211_CHAN_WIDTH_80: - return IEEE80211_STA_RX_BW_80; + bw = IEEE80211_STA_RX_BW_80; } + + check_max: + if (bw > sta->cur_max_bandwidth) + bw = sta->cur_max_bandwidth; + return bw; } void ieee80211_sta_set_rx_nss(struct sta_info *sta) @@ -115,3 +138,53 @@ void ieee80211_sta_set_rx_nss(struct sta_info *sta) ht_rx_nss = max(ht_rx_nss, vht_rx_nss); sta->sta.rx_nss = max_t(u8, 1, ht_rx_nss); } + +void ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata, + struct sta_info *sta, u8 opmode, + enum ieee80211_band band) +{ + struct ieee80211_local *local = sdata->local; + struct ieee80211_supported_band *sband; + enum ieee80211_sta_rx_bandwidth new_bw; + u32 changed = 0; + u8 nss; + + sband = local->hw.wiphy->bands[band]; + + /* ignore - no support for BF yet */ + if (opmode & IEEE80211_OPMODE_NOTIF_RX_NSS_TYPE_BF) + return; + + nss = opmode & IEEE80211_OPMODE_NOTIF_RX_NSS_MASK; + nss >>= IEEE80211_OPMODE_NOTIF_RX_NSS_SHIFT; + nss += 1; + + if (sta->sta.rx_nss != nss) { + sta->sta.rx_nss = nss; + changed |= IEEE80211_RC_NSS_CHANGED; + } + + switch (opmode & IEEE80211_OPMODE_NOTIF_CHANWIDTH_MASK) { + case IEEE80211_OPMODE_NOTIF_CHANWIDTH_20MHZ: + sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_20; + break; + case IEEE80211_OPMODE_NOTIF_CHANWIDTH_40MHZ: + sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_40; + break; + case IEEE80211_OPMODE_NOTIF_CHANWIDTH_80MHZ: + sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_80; + break; + case IEEE80211_OPMODE_NOTIF_CHANWIDTH_160MHZ: + sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_160; + break; + } + + new_bw = ieee80211_sta_cur_vht_bw(sta); + if (new_bw != sta->sta.bandwidth) { + sta->sta.bandwidth = new_bw; + changed |= IEEE80211_RC_NSS_CHANGED; + } + + if (changed) + rate_control_rate_update(local, sband, sta, changed); +} From 1128958dc22cbfa2562082da2621a06ba71bdce2 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 7 Feb 2013 17:36:12 +0100 Subject: [PATCH 188/209] mac80211: init HT TX data before rate control In case of connection, the station data is initialised from the beacon/probe response first and then updated from the association response. If the latter is different we update the rate control algorithm and driver. Instead of doing it this way, set the station data properly with data from the association response before initializing rate control. Also simplify the code by passing the station pointer. Signed-off-by: Johannes Berg --- net/mac80211/mlme.c | 39 +++++++++++++++++++-------------------- 1 file changed, 19 insertions(+), 20 deletions(-) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index be1147286801..b97b615d5711 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -175,6 +175,7 @@ static int ecw2cw(int ecw) } static u32 ieee80211_config_ht_tx(struct ieee80211_sub_if_data *sdata, + struct sta_info *sta, struct ieee80211_ht_operation *ht_oper, const u8 *bssid, bool reconfig) { @@ -182,11 +183,13 @@ static u32 ieee80211_config_ht_tx(struct ieee80211_sub_if_data *sdata, struct ieee80211_supported_band *sband; struct ieee80211_chanctx_conf *chanctx_conf; struct ieee80211_channel *chan; - struct sta_info *sta; u32 changed = 0; u16 ht_opmode; bool disable_40 = false; + if (WARN_ON_ONCE(!sta)) + return 0; + rcu_read_lock(); chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); if (WARN_ON(!chanctx_conf)) { @@ -216,28 +219,19 @@ static u32 ieee80211_config_ht_tx(struct ieee80211_sub_if_data *sdata, if (!(ht_oper->ht_param & IEEE80211_HT_PARAM_CHAN_WIDTH_ANY)) disable_40 = true; - mutex_lock(&local->sta_mtx); - sta = sta_info_get(sdata, bssid); - - if (WARN_ON_ONCE(!sta)) { - mutex_unlock(&local->sta_mtx); - return changed; - } - if (!(sta->sta.ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40)) disable_40 = true; - if (!reconfig || - disable_40 != (sta->sta.bandwidth < IEEE80211_STA_RX_BW_40)) { + if (disable_40 != (sta->sta.bandwidth < IEEE80211_STA_RX_BW_40)) { if (disable_40) sta->sta.bandwidth = IEEE80211_STA_RX_BW_20; else sta->sta.bandwidth = ieee80211_sta_cur_vht_bw(sta); - rate_control_rate_update(local, sband, sta, - IEEE80211_RC_BW_CHANGED); + if (reconfig) + rate_control_rate_update(local, sband, sta, + IEEE80211_RC_BW_CHANGED); } - mutex_unlock(&local->sta_mtx); ht_opmode = le16_to_cpu(ht_oper->operation_mode); @@ -2217,6 +2211,12 @@ static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata, ieee80211_vht_cap_ie_to_sta_vht_cap(sdata, sband, elems.vht_cap_elem, sta); + if (elems.ht_operation && elems.wmm_param && + !(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) + changed |= ieee80211_config_ht_tx(sdata, sta, + elems.ht_operation, + cbss->bssid, false); + rate_control_rate_init(sta); if (ifmgd->flags & IEEE80211_STA_MFP_ENABLED) @@ -2254,11 +2254,6 @@ static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata, ieee80211_set_wmm_default(sdata, false); changed |= BSS_CHANGED_QOS; - if (elems.ht_operation && elems.wmm_param && - !(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) - changed |= ieee80211_config_ht_tx(sdata, elems.ht_operation, - cbss->bssid, false); - /* set AID and assoc capability, * ieee80211_set_associated() will tell the driver */ bss_conf->aid = aid; @@ -2734,10 +2729,14 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, erp_valid, erp_value); + mutex_lock(&local->sta_mtx); if (elems.ht_cap_elem && elems.ht_operation && elems.wmm_param && !(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) - changed |= ieee80211_config_ht_tx(sdata, elems.ht_operation, + changed |= ieee80211_config_ht_tx(sdata, + sta_info_get(sdata, bssid), + elems.ht_operation, bssid, true); + mutex_unlock(&local->sta_mtx); if (elems.country_elem && elems.pwr_constr_elem && mgmt->u.probe_resp.capab_info & From cb145022c82bde532b386c7a6f1dcef1b2bca2e5 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 7 Feb 2013 20:41:50 +0100 Subject: [PATCH 189/209] mac80211: fix HT/VHT disable flags The code to disable HT and VHT if VHT was advertised without VHT is wrong -- it accidentally uses the wrong flags. Fix that. Signed-off-by: Johannes Berg --- net/mac80211/mlme.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index b97b615d5711..e6da6bf8cc27 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -3588,8 +3588,8 @@ static int ieee80211_prep_channel(struct ieee80211_sub_if_data *sdata, vht_oper = NULL; sdata_info(sdata, "AP advertised VHT without HT, disabling both\n"); - sdata->flags |= IEEE80211_STA_DISABLE_HT; - sdata->flags |= IEEE80211_STA_DISABLE_VHT; + ifmgd->flags |= IEEE80211_STA_DISABLE_HT; + ifmgd->flags |= IEEE80211_STA_DISABLE_VHT; } } From 18942d3be0e0e67aa40550ce3266e48b51845d52 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 7 Feb 2013 21:30:37 +0100 Subject: [PATCH 190/209] mac80211: fix ieee80211_change_chandef name This should be called ieee80211_change_chanctx() since it changes the channel context, not a chandef. Signed-off-by: Johannes Berg --- net/mac80211/chan.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/net/mac80211/chan.c b/net/mac80211/chan.c index d91ccfcaa6d1..78dbb371f16e 100644 --- a/net/mac80211/chan.c +++ b/net/mac80211/chan.c @@ -9,7 +9,7 @@ #include "ieee80211_i.h" #include "driver-ops.h" -static void ieee80211_change_chandef(struct ieee80211_local *local, +static void ieee80211_change_chanctx(struct ieee80211_local *local, struct ieee80211_chanctx *ctx, const struct cfg80211_chan_def *chandef) { @@ -49,7 +49,7 @@ ieee80211_find_chanctx(struct ieee80211_local *local, if (!compat) continue; - ieee80211_change_chandef(local, ctx, compat); + ieee80211_change_chanctx(local, ctx, compat); return ctx; } @@ -175,7 +175,7 @@ static void ieee80211_recalc_chanctx_chantype(struct ieee80211_local *local, if (WARN_ON_ONCE(!compat)) return; - ieee80211_change_chandef(local, ctx, compat); + ieee80211_change_chanctx(local, ctx, compat); } static void ieee80211_unassign_vif_chanctx(struct ieee80211_sub_if_data *sdata, From bee7f58699a406a4210ba9e0367bae7ac666abd0 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 7 Feb 2013 22:24:55 +0100 Subject: [PATCH 191/209] mac80211: handle operating mode notif in beacon/assoc response In beacons and association response frames an AP may include an operating mode notification element to advertise changes in the number of spatial streams it can receive. Handle this using the existing function that handles the action frame, but only handle NSS changes, not bandwidth changes which aren't allowed here. Signed-off-by: Johannes Berg --- net/mac80211/ieee80211_i.h | 3 ++- net/mac80211/mlme.c | 26 +++++++++++++++++++++++--- net/mac80211/rx.c | 3 ++- net/mac80211/util.c | 6 ++++++ net/mac80211/vht.c | 6 +++++- 5 files changed, 38 insertions(+), 6 deletions(-) diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 4947c91c6c86..892bac64a189 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1197,6 +1197,7 @@ struct ieee802_11_elems { u8 *pwr_constr_elem; u8 *quiet_elem; /* first quite element */ u8 *timeout_int; + u8 *opmode_notif; /* length of them, respectively */ u8 ssid_len; @@ -1435,7 +1436,7 @@ enum ieee80211_sta_rx_bandwidth ieee80211_sta_cur_vht_bw(struct sta_info *sta); void ieee80211_sta_set_rx_nss(struct sta_info *sta); void ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata, struct sta_info *sta, u8 opmode, - enum ieee80211_band band); + enum ieee80211_band band, bool nss_only); /* Spectrum management */ void ieee80211_process_measurement_req(struct ieee80211_sub_if_data *sdata, diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index e6da6bf8cc27..f2c6f7794f35 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -2217,6 +2217,21 @@ static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata, elems.ht_operation, cbss->bssid, false); + /* + * If an operating mode notification IE is present, override the + * NSS calculation (that would be done in rate_control_rate_init()) + * and use the # of streams from that element. + */ + if (elems.opmode_notif && + !(*elems.opmode_notif & IEEE80211_OPMODE_NOTIF_RX_NSS_TYPE_BF)) { + u8 nss; + + nss = *elems.opmode_notif & IEEE80211_OPMODE_NOTIF_RX_NSS_MASK; + nss >>= IEEE80211_OPMODE_NOTIF_RX_NSS_SHIFT; + nss += 1; + sta->sta.rx_nss = nss; + } + rate_control_rate_init(sta); if (ifmgd->flags & IEEE80211_STA_MFP_ENABLED) @@ -2489,6 +2504,7 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, struct ieee80211_local *local = sdata->local; struct ieee80211_chanctx_conf *chanctx_conf; struct ieee80211_channel *chan; + struct sta_info *sta; u32 changed = 0; bool erp_valid; u8 erp_value = 0; @@ -2728,14 +2744,18 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, le16_to_cpu(mgmt->u.beacon.capab_info), erp_valid, erp_value); - mutex_lock(&local->sta_mtx); + sta = sta_info_get(sdata, bssid); + if (elems.ht_cap_elem && elems.ht_operation && elems.wmm_param && !(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) - changed |= ieee80211_config_ht_tx(sdata, - sta_info_get(sdata, bssid), + changed |= ieee80211_config_ht_tx(sdata, sta, elems.ht_operation, bssid, true); + + if (sta && elems.opmode_notif) + ieee80211_vht_handle_opmode(sdata, sta, *elems.opmode_notif, + rx_status->band, true); mutex_unlock(&local->sta_mtx); if (elems.country_elem && elems.pwr_constr_elem && diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 1617e0bd4ca6..30f1ba6de8f3 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -2459,7 +2459,8 @@ ieee80211_rx_h_action(struct ieee80211_rx_data *rx) opmode = mgmt->u.action.u.vht_opmode_notif.operating_mode; ieee80211_vht_handle_opmode(rx->sdata, rx->sta, - opmode, status->band); + opmode, status->band, + false); goto handled; } default: diff --git a/net/mac80211/util.c b/net/mac80211/util.c index b231bc2ed740..e24ff38606a9 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -787,6 +787,12 @@ u32 ieee802_11_parse_elems_crc(u8 *start, size_t len, else elem_parse_failed = true; break; + case WLAN_EID_OPMODE_NOTIF: + if (elen > 0) + elems->opmode_notif = pos; + else + elem_parse_failed = true; + break; case WLAN_EID_MESH_ID: elems->mesh_id = pos; elems->mesh_id_len = elen; diff --git a/net/mac80211/vht.c b/net/mac80211/vht.c index 0951f74e7ff5..a9549fcc5a04 100644 --- a/net/mac80211/vht.c +++ b/net/mac80211/vht.c @@ -141,7 +141,7 @@ void ieee80211_sta_set_rx_nss(struct sta_info *sta) void ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata, struct sta_info *sta, u8 opmode, - enum ieee80211_band band) + enum ieee80211_band band, bool nss_only) { struct ieee80211_local *local = sdata->local; struct ieee80211_supported_band *sband; @@ -164,6 +164,9 @@ void ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata, changed |= IEEE80211_RC_NSS_CHANGED; } + if (nss_only) + goto change; + switch (opmode & IEEE80211_OPMODE_NOTIF_CHANWIDTH_MASK) { case IEEE80211_OPMODE_NOTIF_CHANWIDTH_20MHZ: sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_20; @@ -185,6 +188,7 @@ void ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata, changed |= IEEE80211_RC_NSS_CHANGED; } + change: if (changed) rate_control_rate_update(local, sband, sta, changed); } From 08e6effa1187cc5f401a1cc286ce84f0a581b35a Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 7 Feb 2013 23:33:32 +0100 Subject: [PATCH 192/209] mac80211: disable HT/VHT if AP has no HT/VHT capability Having HT/VHT operation IEs but not capability IEs leads to a strange situation where we configure the channel to an HT or VHT bandwidth and then can't actually use it. Prevent this by checking that the HT and VHT capability IEs are present as well as the operation IEs; if not, disable HT and/or VHT. Signed-off-by: Johannes Berg --- net/mac80211/mlme.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index f2c6f7794f35..03f278880dba 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -3589,16 +3589,22 @@ static int ieee80211_prep_channel(struct ieee80211_sub_if_data *sdata, if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT) && sband->ht_cap.ht_supported) { - const u8 *ht_oper_ie; + const u8 *ht_oper_ie, *ht_cap; ht_oper_ie = ieee80211_bss_get_ie(cbss, WLAN_EID_HT_OPERATION); if (ht_oper_ie && ht_oper_ie[1] >= sizeof(*ht_oper)) ht_oper = (void *)(ht_oper_ie + 2); + + ht_cap = ieee80211_bss_get_ie(cbss, WLAN_EID_HT_CAPABILITY); + if (!ht_cap || ht_cap[1] < sizeof(struct ieee80211_ht_cap)) { + ifmgd->flags |= IEEE80211_STA_DISABLE_HT; + ht_oper = NULL; + } } if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) && sband->vht_cap.vht_supported) { - const u8 *vht_oper_ie; + const u8 *vht_oper_ie, *vht_cap; vht_oper_ie = ieee80211_bss_get_ie(cbss, WLAN_EID_VHT_OPERATION); @@ -3611,6 +3617,12 @@ static int ieee80211_prep_channel(struct ieee80211_sub_if_data *sdata, ifmgd->flags |= IEEE80211_STA_DISABLE_HT; ifmgd->flags |= IEEE80211_STA_DISABLE_VHT; } + + vht_cap = ieee80211_bss_get_ie(cbss, WLAN_EID_VHT_CAPABILITY); + if (!vht_cap || vht_cap[1] < sizeof(struct ieee80211_vht_cap)) { + ifmgd->flags |= IEEE80211_STA_DISABLE_VHT; + vht_oper = NULL; + } } ifmgd->flags |= ieee80211_determine_chantype(sdata, sband, From f2d9330ee820b01e2b1caf46370bc7963d259908 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 8 Feb 2013 13:15:55 +0100 Subject: [PATCH 193/209] mac80211: clean up channel use in ieee80211_config_ht_tx The channel use is confusing, some uses the channel context and some the bss_conf.chandef. The latter is fine, so get rid of the channel context part. Signed-off-by: Johannes Berg --- net/mac80211/mlme.c | 14 +++----------- 1 file changed, 3 insertions(+), 11 deletions(-) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 03f278880dba..8fdf1e1aee5e 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -181,7 +181,6 @@ static u32 ieee80211_config_ht_tx(struct ieee80211_sub_if_data *sdata, { struct ieee80211_local *local = sdata->local; struct ieee80211_supported_band *sband; - struct ieee80211_chanctx_conf *chanctx_conf; struct ieee80211_channel *chan; u32 changed = 0; u16 ht_opmode; @@ -190,23 +189,16 @@ static u32 ieee80211_config_ht_tx(struct ieee80211_sub_if_data *sdata, if (WARN_ON_ONCE(!sta)) return 0; - rcu_read_lock(); - chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); - if (WARN_ON(!chanctx_conf)) { - rcu_read_unlock(); - return 0; - } - chan = chanctx_conf->def.chan; - rcu_read_unlock(); + chan = sdata->vif.bss_conf.chandef.chan; sband = local->hw.wiphy->bands[chan->band]; switch (sdata->vif.bss_conf.chandef.width) { case NL80211_CHAN_WIDTH_40: - if (sdata->vif.bss_conf.chandef.chan->center_freq > + if (chan->center_freq > sdata->vif.bss_conf.chandef.center_freq1 && chan->flags & IEEE80211_CHAN_NO_HT40MINUS) disable_40 = true; - if (sdata->vif.bss_conf.chandef.chan->center_freq < + if (chan->center_freq < sdata->vif.bss_conf.chandef.center_freq1 && chan->flags & IEEE80211_CHAN_NO_HT40PLUS) disable_40 = true; From 2c9b735982ee8a2d34e7eeb3e26b683f81872fdb Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 7 Feb 2013 21:37:29 +0100 Subject: [PATCH 194/209] mac80211: add ieee80211_vif_change_bandwidth For HT and VHT the current bandwidth can change, add the function ieee80211_vif_change_bandwidth() to take care of this. It returns a failure if the new bandwidth isn't compatible with the existing channel context, the caller has to handle that. When it happens, also inform the driver that the bandwidth changed for this virtual interface (no drivers would actually care today though.) Changing to/from HT/VHT isn't allowed though. Signed-off-by: Johannes Berg --- include/net/mac80211.h | 4 ++++ net/mac80211/chan.c | 49 ++++++++++++++++++++++++++++++++++++++ net/mac80211/ieee80211_i.h | 4 ++++ 3 files changed, 57 insertions(+) diff --git a/include/net/mac80211.h b/include/net/mac80211.h index b7fb311e83f4..54e2add8429f 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -215,6 +215,9 @@ struct ieee80211_chanctx_conf { * changed (currently only in P2P client mode, GO mode will be later) * @BSS_CHANGED_DTIM_PERIOD: the DTIM period value was changed (set when * it becomes valid, managed mode only) + * @BSS_CHANGED_BANDWIDTH: The bandwidth used by this interface changed, + * note that this is only called when it changes after the channel + * context had been assigned. */ enum ieee80211_bss_change { BSS_CHANGED_ASSOC = 1<<0, @@ -238,6 +241,7 @@ enum ieee80211_bss_change { BSS_CHANGED_TXPOWER = 1<<18, BSS_CHANGED_P2P_PS = 1<<19, BSS_CHANGED_DTIM_PERIOD = 1<<20, + BSS_CHANGED_BANDWIDTH = 1<<21, /* when adding here, make sure to change ieee80211_reconfig */ }; diff --git a/net/mac80211/chan.c b/net/mac80211/chan.c index 78dbb371f16e..78c0d90dd641 100644 --- a/net/mac80211/chan.c +++ b/net/mac80211/chan.c @@ -375,6 +375,55 @@ int ieee80211_vif_use_channel(struct ieee80211_sub_if_data *sdata, return ret; } +int ieee80211_vif_change_bandwidth(struct ieee80211_sub_if_data *sdata, + const struct cfg80211_chan_def *chandef, + u32 *changed) +{ + struct ieee80211_local *local = sdata->local; + struct ieee80211_chanctx_conf *conf; + struct ieee80211_chanctx *ctx; + int ret; + + if (!cfg80211_chandef_usable(sdata->local->hw.wiphy, chandef, + IEEE80211_CHAN_DISABLED)) + return -EINVAL; + + mutex_lock(&local->chanctx_mtx); + if (cfg80211_chandef_identical(chandef, &sdata->vif.bss_conf.chandef)) { + ret = 0; + goto out; + } + + if (chandef->width == NL80211_CHAN_WIDTH_20_NOHT || + sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT) { + ret = -EINVAL; + goto out; + } + + conf = rcu_dereference_protected(sdata->vif.chanctx_conf, + lockdep_is_held(&local->chanctx_mtx)); + if (!conf) { + ret = -EINVAL; + goto out; + } + + ctx = container_of(conf, struct ieee80211_chanctx, conf); + if (!cfg80211_chandef_compatible(&conf->def, chandef)) { + ret = -EINVAL; + goto out; + } + + sdata->vif.bss_conf.chandef = *chandef; + + ieee80211_recalc_chanctx_chantype(local, ctx); + + *changed |= BSS_CHANGED_BANDWIDTH; + ret = 0; + out: + mutex_unlock(&local->chanctx_mtx); + return ret; +} + void ieee80211_vif_release_channel(struct ieee80211_sub_if_data *sdata) { WARN_ON(sdata->dev && netif_carrier_ok(sdata->dev)); diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 892bac64a189..d1074442f1b5 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1613,6 +1613,10 @@ int __must_check ieee80211_vif_use_channel(struct ieee80211_sub_if_data *sdata, const struct cfg80211_chan_def *chandef, enum ieee80211_chanctx_mode mode); +int __must_check +ieee80211_vif_change_bandwidth(struct ieee80211_sub_if_data *sdata, + const struct cfg80211_chan_def *chandef, + u32 *changed); void ieee80211_vif_release_channel(struct ieee80211_sub_if_data *sdata); void ieee80211_vif_vlan_copy_chanctx(struct ieee80211_sub_if_data *sdata); void ieee80211_vif_copy_chanctx_to_vlans(struct ieee80211_sub_if_data *sdata, From 6565ec9b58483a9706fbe888364aeceb359aeced Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 8 Feb 2013 14:52:32 +0100 Subject: [PATCH 195/209] mac80211: move ieee80211_determine_chantype function The next patch will need it further up in the file, so move it unchanged now. Signed-off-by: Johannes Berg --- net/mac80211/mlme.c | 390 ++++++++++++++++++++++---------------------- 1 file changed, 195 insertions(+), 195 deletions(-) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 8fdf1e1aee5e..50423c66c239 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -174,6 +174,201 @@ static int ecw2cw(int ecw) return (1 << ecw) - 1; } +static u32 chandef_downgrade(struct cfg80211_chan_def *c) +{ + u32 ret; + int tmp; + + switch (c->width) { + case NL80211_CHAN_WIDTH_20: + c->width = NL80211_CHAN_WIDTH_20_NOHT; + ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT; + break; + case NL80211_CHAN_WIDTH_40: + c->width = NL80211_CHAN_WIDTH_20; + c->center_freq1 = c->chan->center_freq; + ret = IEEE80211_STA_DISABLE_40MHZ | + IEEE80211_STA_DISABLE_VHT; + break; + case NL80211_CHAN_WIDTH_80: + tmp = (30 + c->chan->center_freq - c->center_freq1)/20; + /* n_P40 */ + tmp /= 2; + /* freq_P40 */ + c->center_freq1 = c->center_freq1 - 20 + 40 * tmp; + c->width = NL80211_CHAN_WIDTH_40; + ret = IEEE80211_STA_DISABLE_VHT; + break; + case NL80211_CHAN_WIDTH_80P80: + c->center_freq2 = 0; + c->width = NL80211_CHAN_WIDTH_80; + ret = IEEE80211_STA_DISABLE_80P80MHZ | + IEEE80211_STA_DISABLE_160MHZ; + break; + case NL80211_CHAN_WIDTH_160: + /* n_P20 */ + tmp = (70 + c->chan->center_freq - c->center_freq1)/20; + /* n_P80 */ + tmp /= 4; + c->center_freq1 = c->center_freq1 - 40 + 80 * tmp; + c->width = NL80211_CHAN_WIDTH_80; + ret = IEEE80211_STA_DISABLE_80P80MHZ | + IEEE80211_STA_DISABLE_160MHZ; + break; + default: + case NL80211_CHAN_WIDTH_20_NOHT: + WARN_ON_ONCE(1); + c->width = NL80211_CHAN_WIDTH_20_NOHT; + ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT; + break; + } + + WARN_ON_ONCE(!cfg80211_chandef_valid(c)); + + return ret; +} + +static u32 +ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata, + struct ieee80211_supported_band *sband, + struct ieee80211_channel *channel, + const struct ieee80211_ht_operation *ht_oper, + const struct ieee80211_vht_operation *vht_oper, + struct cfg80211_chan_def *chandef) +{ + struct cfg80211_chan_def vht_chandef; + u32 ht_cfreq, ret; + + chandef->chan = channel; + chandef->width = NL80211_CHAN_WIDTH_20_NOHT; + chandef->center_freq1 = channel->center_freq; + chandef->center_freq2 = 0; + + if (!ht_oper || !sband->ht_cap.ht_supported) { + ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT; + goto out; + } + + chandef->width = NL80211_CHAN_WIDTH_20; + + ht_cfreq = ieee80211_channel_to_frequency(ht_oper->primary_chan, + channel->band); + /* check that channel matches the right operating channel */ + if (channel->center_freq != ht_cfreq) { + /* + * It's possible that some APs are confused here; + * Netgear WNDR3700 sometimes reports 4 higher than + * the actual channel in association responses, but + * since we look at probe response/beacon data here + * it should be OK. + */ + sdata_info(sdata, + "Wrong control channel: center-freq: %d ht-cfreq: %d ht->primary_chan: %d band: %d - Disabling HT\n", + channel->center_freq, ht_cfreq, + ht_oper->primary_chan, channel->band); + ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT; + goto out; + } + + /* check 40 MHz support, if we have it */ + if (sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) { + switch (ht_oper->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) { + case IEEE80211_HT_PARAM_CHA_SEC_ABOVE: + chandef->width = NL80211_CHAN_WIDTH_40; + chandef->center_freq1 += 10; + break; + case IEEE80211_HT_PARAM_CHA_SEC_BELOW: + chandef->width = NL80211_CHAN_WIDTH_40; + chandef->center_freq1 -= 10; + break; + } + } else { + /* 40 MHz (and 80 MHz) must be supported for VHT */ + ret = IEEE80211_STA_DISABLE_VHT; + goto out; + } + + if (!vht_oper || !sband->vht_cap.vht_supported) { + ret = IEEE80211_STA_DISABLE_VHT; + goto out; + } + + vht_chandef.chan = channel; + vht_chandef.center_freq1 = + ieee80211_channel_to_frequency(vht_oper->center_freq_seg1_idx, + channel->band); + vht_chandef.center_freq2 = 0; + + if (vht_oper->center_freq_seg2_idx) + vht_chandef.center_freq2 = + ieee80211_channel_to_frequency( + vht_oper->center_freq_seg2_idx, + channel->band); + + switch (vht_oper->chan_width) { + case IEEE80211_VHT_CHANWIDTH_USE_HT: + vht_chandef.width = chandef->width; + break; + case IEEE80211_VHT_CHANWIDTH_80MHZ: + vht_chandef.width = NL80211_CHAN_WIDTH_80; + break; + case IEEE80211_VHT_CHANWIDTH_160MHZ: + vht_chandef.width = NL80211_CHAN_WIDTH_160; + break; + case IEEE80211_VHT_CHANWIDTH_80P80MHZ: + vht_chandef.width = NL80211_CHAN_WIDTH_80P80; + break; + default: + sdata_info(sdata, + "AP VHT operation IE has invalid channel width (%d), disable VHT\n", + vht_oper->chan_width); + ret = IEEE80211_STA_DISABLE_VHT; + goto out; + } + + if (!cfg80211_chandef_valid(&vht_chandef)) { + sdata_info(sdata, + "AP VHT information is invalid, disable VHT\n"); + ret = IEEE80211_STA_DISABLE_VHT; + goto out; + } + + if (cfg80211_chandef_identical(chandef, &vht_chandef)) { + ret = 0; + goto out; + } + + if (!cfg80211_chandef_compatible(chandef, &vht_chandef)) { + sdata_info(sdata, + "AP VHT information doesn't match HT, disable VHT\n"); + ret = IEEE80211_STA_DISABLE_VHT; + goto out; + } + + *chandef = vht_chandef; + + ret = 0; + +out: + while (!cfg80211_chandef_usable(sdata->local->hw.wiphy, chandef, + IEEE80211_CHAN_DISABLED)) { + if (WARN_ON(chandef->width == NL80211_CHAN_WIDTH_20_NOHT)) { + ret = IEEE80211_STA_DISABLE_HT | + IEEE80211_STA_DISABLE_VHT; + goto out; + } + + ret |= chandef_downgrade(chandef); + } + + if (chandef->width != vht_chandef.width) + sdata_info(sdata, + "capabilities/regulatory prevented using AP HT/VHT configuration, downgraded\n"); + + WARN_ON_ONCE(!cfg80211_chandef_valid(chandef)); + return ret; +} + static u32 ieee80211_config_ht_tx(struct ieee80211_sub_if_data *sdata, struct sta_info *sta, struct ieee80211_ht_operation *ht_oper, @@ -3321,201 +3516,6 @@ int ieee80211_max_network_latency(struct notifier_block *nb, return 0; } -static u32 chandef_downgrade(struct cfg80211_chan_def *c) -{ - u32 ret; - int tmp; - - switch (c->width) { - case NL80211_CHAN_WIDTH_20: - c->width = NL80211_CHAN_WIDTH_20_NOHT; - ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT; - break; - case NL80211_CHAN_WIDTH_40: - c->width = NL80211_CHAN_WIDTH_20; - c->center_freq1 = c->chan->center_freq; - ret = IEEE80211_STA_DISABLE_40MHZ | - IEEE80211_STA_DISABLE_VHT; - break; - case NL80211_CHAN_WIDTH_80: - tmp = (30 + c->chan->center_freq - c->center_freq1)/20; - /* n_P40 */ - tmp /= 2; - /* freq_P40 */ - c->center_freq1 = c->center_freq1 - 20 + 40 * tmp; - c->width = NL80211_CHAN_WIDTH_40; - ret = IEEE80211_STA_DISABLE_VHT; - break; - case NL80211_CHAN_WIDTH_80P80: - c->center_freq2 = 0; - c->width = NL80211_CHAN_WIDTH_80; - ret = IEEE80211_STA_DISABLE_80P80MHZ | - IEEE80211_STA_DISABLE_160MHZ; - break; - case NL80211_CHAN_WIDTH_160: - /* n_P20 */ - tmp = (70 + c->chan->center_freq - c->center_freq1)/20; - /* n_P80 */ - tmp /= 4; - c->center_freq1 = c->center_freq1 - 40 + 80 * tmp; - c->width = NL80211_CHAN_WIDTH_80; - ret = IEEE80211_STA_DISABLE_80P80MHZ | - IEEE80211_STA_DISABLE_160MHZ; - break; - default: - case NL80211_CHAN_WIDTH_20_NOHT: - WARN_ON_ONCE(1); - c->width = NL80211_CHAN_WIDTH_20_NOHT; - ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT; - break; - } - - WARN_ON_ONCE(!cfg80211_chandef_valid(c)); - - return ret; -} - -static u32 -ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata, - struct ieee80211_supported_band *sband, - struct ieee80211_channel *channel, - const struct ieee80211_ht_operation *ht_oper, - const struct ieee80211_vht_operation *vht_oper, - struct cfg80211_chan_def *chandef) -{ - struct cfg80211_chan_def vht_chandef; - u32 ht_cfreq, ret; - - chandef->chan = channel; - chandef->width = NL80211_CHAN_WIDTH_20_NOHT; - chandef->center_freq1 = channel->center_freq; - chandef->center_freq2 = 0; - - if (!ht_oper || !sband->ht_cap.ht_supported) { - ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT; - goto out; - } - - chandef->width = NL80211_CHAN_WIDTH_20; - - ht_cfreq = ieee80211_channel_to_frequency(ht_oper->primary_chan, - channel->band); - /* check that channel matches the right operating channel */ - if (channel->center_freq != ht_cfreq) { - /* - * It's possible that some APs are confused here; - * Netgear WNDR3700 sometimes reports 4 higher than - * the actual channel in association responses, but - * since we look at probe response/beacon data here - * it should be OK. - */ - sdata_info(sdata, - "Wrong control channel: center-freq: %d ht-cfreq: %d ht->primary_chan: %d band: %d - Disabling HT\n", - channel->center_freq, ht_cfreq, - ht_oper->primary_chan, channel->band); - ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT; - goto out; - } - - /* check 40 MHz support, if we have it */ - if (sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) { - switch (ht_oper->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) { - case IEEE80211_HT_PARAM_CHA_SEC_ABOVE: - chandef->width = NL80211_CHAN_WIDTH_40; - chandef->center_freq1 += 10; - break; - case IEEE80211_HT_PARAM_CHA_SEC_BELOW: - chandef->width = NL80211_CHAN_WIDTH_40; - chandef->center_freq1 -= 10; - break; - } - } else { - /* 40 MHz (and 80 MHz) must be supported for VHT */ - ret = IEEE80211_STA_DISABLE_VHT; - goto out; - } - - if (!vht_oper || !sband->vht_cap.vht_supported) { - ret = IEEE80211_STA_DISABLE_VHT; - goto out; - } - - vht_chandef.chan = channel; - vht_chandef.center_freq1 = - ieee80211_channel_to_frequency(vht_oper->center_freq_seg1_idx, - channel->band); - vht_chandef.center_freq2 = 0; - - if (vht_oper->center_freq_seg2_idx) - vht_chandef.center_freq2 = - ieee80211_channel_to_frequency( - vht_oper->center_freq_seg2_idx, - channel->band); - - switch (vht_oper->chan_width) { - case IEEE80211_VHT_CHANWIDTH_USE_HT: - vht_chandef.width = chandef->width; - break; - case IEEE80211_VHT_CHANWIDTH_80MHZ: - vht_chandef.width = NL80211_CHAN_WIDTH_80; - break; - case IEEE80211_VHT_CHANWIDTH_160MHZ: - vht_chandef.width = NL80211_CHAN_WIDTH_160; - break; - case IEEE80211_VHT_CHANWIDTH_80P80MHZ: - vht_chandef.width = NL80211_CHAN_WIDTH_80P80; - break; - default: - sdata_info(sdata, - "AP VHT operation IE has invalid channel width (%d), disable VHT\n", - vht_oper->chan_width); - ret = IEEE80211_STA_DISABLE_VHT; - goto out; - } - - if (!cfg80211_chandef_valid(&vht_chandef)) { - sdata_info(sdata, - "AP VHT information is invalid, disable VHT\n"); - ret = IEEE80211_STA_DISABLE_VHT; - goto out; - } - - if (cfg80211_chandef_identical(chandef, &vht_chandef)) { - ret = 0; - goto out; - } - - if (!cfg80211_chandef_compatible(chandef, &vht_chandef)) { - sdata_info(sdata, - "AP VHT information doesn't match HT, disable VHT\n"); - ret = IEEE80211_STA_DISABLE_VHT; - goto out; - } - - *chandef = vht_chandef; - - ret = 0; - -out: - while (!cfg80211_chandef_usable(sdata->local->hw.wiphy, chandef, - IEEE80211_CHAN_DISABLED)) { - if (WARN_ON(chandef->width == NL80211_CHAN_WIDTH_20_NOHT)) { - ret = IEEE80211_STA_DISABLE_HT | - IEEE80211_STA_DISABLE_VHT; - goto out; - } - - ret |= chandef_downgrade(chandef); - } - - if (chandef->width != vht_chandef.width) - sdata_info(sdata, - "capabilities/regulatory prevented using AP HT/VHT configuration, downgraded\n"); - - WARN_ON_ONCE(!cfg80211_chandef_valid(chandef)); - return ret; -} - static u8 ieee80211_ht_vht_rx_chains(struct ieee80211_sub_if_data *sdata, struct cfg80211_bss *cbss) { From 30eb1dc2c43039e0fe278e6f3a288de9f216d70d Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 8 Feb 2013 15:12:14 +0100 Subject: [PATCH 196/209] mac80211: properly track HT/VHT operation changes A while ago, I made the mac80211 station code never change the channel type after association. This solved a number of issues but is ultimately wrong, we should react if the AP changes the HT operation IE and switches bandwidth. One of the issues is that we associate as HT40 capable, but if the AP ever switches to 40 MHz we won't be able to receive such frames because we never set our channel to 40 MHz. This addresses this and VHT operation changes. If there's a change that is incompatible with our setup, e.g. if the AP decides to change the channel entirely (and for some reason we still hear the beacon) we'll just disconnect. Signed-off-by: Johannes Berg --- net/mac80211/mlme.c | 242 +++++++++++++++++++++++++++++++------------- 1 file changed, 171 insertions(+), 71 deletions(-) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 50423c66c239..05b229e3b226 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -114,6 +114,9 @@ enum rx_mgmt_action { /* caller must call cfg80211_send_assoc_timeout() */ RX_MGMT_CFG80211_ASSOC_TIMEOUT, + + /* used when a processed beacon causes a deauth */ + RX_MGMT_CFG80211_TX_DEAUTH, }; /* utils */ @@ -234,7 +237,7 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata, struct ieee80211_channel *channel, const struct ieee80211_ht_operation *ht_oper, const struct ieee80211_vht_operation *vht_oper, - struct cfg80211_chan_def *chandef) + struct cfg80211_chan_def *chandef, bool verbose) { struct cfg80211_chan_def vht_chandef; u32 ht_cfreq, ret; @@ -262,10 +265,11 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata, * since we look at probe response/beacon data here * it should be OK. */ - sdata_info(sdata, - "Wrong control channel: center-freq: %d ht-cfreq: %d ht->primary_chan: %d band: %d - Disabling HT\n", - channel->center_freq, ht_cfreq, - ht_oper->primary_chan, channel->band); + if (verbose) + sdata_info(sdata, + "Wrong control channel: center-freq: %d ht-cfreq: %d ht->primary_chan: %d band: %d - Disabling HT\n", + channel->center_freq, ht_cfreq, + ht_oper->primary_chan, channel->band); ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT; goto out; } @@ -319,16 +323,18 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata, vht_chandef.width = NL80211_CHAN_WIDTH_80P80; break; default: - sdata_info(sdata, - "AP VHT operation IE has invalid channel width (%d), disable VHT\n", - vht_oper->chan_width); + if (verbose) + sdata_info(sdata, + "AP VHT operation IE has invalid channel width (%d), disable VHT\n", + vht_oper->chan_width); ret = IEEE80211_STA_DISABLE_VHT; goto out; } if (!cfg80211_chandef_valid(&vht_chandef)) { - sdata_info(sdata, - "AP VHT information is invalid, disable VHT\n"); + if (verbose) + sdata_info(sdata, + "AP VHT information is invalid, disable VHT\n"); ret = IEEE80211_STA_DISABLE_VHT; goto out; } @@ -339,8 +345,9 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata, } if (!cfg80211_chandef_compatible(chandef, &vht_chandef)) { - sdata_info(sdata, - "AP VHT information doesn't match HT, disable VHT\n"); + if (verbose) + sdata_info(sdata, + "AP VHT information doesn't match HT, disable VHT\n"); ret = IEEE80211_STA_DISABLE_VHT; goto out; } @@ -361,7 +368,7 @@ out: ret |= chandef_downgrade(chandef); } - if (chandef->width != vht_chandef.width) + if (chandef->width != vht_chandef.width && verbose) sdata_info(sdata, "capabilities/regulatory prevented using AP HT/VHT configuration, downgraded\n"); @@ -369,66 +376,128 @@ out: return ret; } -static u32 ieee80211_config_ht_tx(struct ieee80211_sub_if_data *sdata, - struct sta_info *sta, - struct ieee80211_ht_operation *ht_oper, - const u8 *bssid, bool reconfig) +static int ieee80211_config_bw(struct ieee80211_sub_if_data *sdata, + struct sta_info *sta, + const struct ieee80211_ht_operation *ht_oper, + const struct ieee80211_vht_operation *vht_oper, + const u8 *bssid, u32 *changed) { struct ieee80211_local *local = sdata->local; + struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; struct ieee80211_supported_band *sband; struct ieee80211_channel *chan; - u32 changed = 0; + struct cfg80211_chan_def chandef; u16 ht_opmode; - bool disable_40 = false; + u32 flags; + enum ieee80211_sta_rx_bandwidth new_sta_bw; + int ret; + + /* if HT was/is disabled, don't track any bandwidth changes */ + if (ifmgd->flags & IEEE80211_STA_DISABLE_HT || !ht_oper) + return 0; + + /* don't check VHT if we associated as non-VHT station */ + if (ifmgd->flags & IEEE80211_STA_DISABLE_VHT) + vht_oper = NULL; if (WARN_ON_ONCE(!sta)) - return 0; + return -EINVAL; chan = sdata->vif.bss_conf.chandef.chan; sband = local->hw.wiphy->bands[chan->band]; - switch (sdata->vif.bss_conf.chandef.width) { - case NL80211_CHAN_WIDTH_40: - if (chan->center_freq > - sdata->vif.bss_conf.chandef.center_freq1 && - chan->flags & IEEE80211_CHAN_NO_HT40MINUS) - disable_40 = true; - if (chan->center_freq < - sdata->vif.bss_conf.chandef.center_freq1 && - chan->flags & IEEE80211_CHAN_NO_HT40PLUS) - disable_40 = true; - break; - default: - break; + /* calculate new channel (type) based on HT/VHT operation IEs */ + flags = ieee80211_determine_chantype(sdata, sband, chan, ht_oper, + vht_oper, &chandef, false); + + /* + * Downgrade the new channel if we associated with restricted + * capabilities. For example, if we associated as a 20 MHz STA + * to a 40 MHz AP (due to regulatory, capabilities or config + * reasons) then switching to a 40 MHz channel now won't do us + * any good -- we couldn't use it with the AP. + */ + if (ifmgd->flags & IEEE80211_STA_DISABLE_80P80MHZ && + chandef.width == NL80211_CHAN_WIDTH_80P80) + flags |= chandef_downgrade(&chandef); + if (ifmgd->flags & IEEE80211_STA_DISABLE_160MHZ && + chandef.width == NL80211_CHAN_WIDTH_160) + flags |= chandef_downgrade(&chandef); + if (ifmgd->flags & IEEE80211_STA_DISABLE_40MHZ && + chandef.width > NL80211_CHAN_WIDTH_20) + flags |= chandef_downgrade(&chandef); + + if (cfg80211_chandef_identical(&chandef, &sdata->vif.bss_conf.chandef)) + return 0; + + sdata_info(sdata, + "AP %pM changed bandwidth, new config is %d MHz, width %d (%d/%d MHz)\n", + ifmgd->bssid, chandef.chan->center_freq, chandef.width, + chandef.center_freq1, chandef.center_freq2); + + if (flags != (ifmgd->flags & (IEEE80211_STA_DISABLE_HT | + IEEE80211_STA_DISABLE_VHT | + IEEE80211_STA_DISABLE_40MHZ | + IEEE80211_STA_DISABLE_80P80MHZ | + IEEE80211_STA_DISABLE_160MHZ)) || + !cfg80211_chandef_valid(&chandef)) { + sdata_info(sdata, + "AP %pM changed bandwidth in a way we can't support - disconnect\n", + ifmgd->bssid); + return -EINVAL; } - /* This can change during the lifetime of the BSS */ - if (!(ht_oper->ht_param & IEEE80211_HT_PARAM_CHAN_WIDTH_ANY)) - disable_40 = true; + switch (chandef.width) { + case NL80211_CHAN_WIDTH_20_NOHT: + case NL80211_CHAN_WIDTH_20: + new_sta_bw = IEEE80211_STA_RX_BW_20; + break; + case NL80211_CHAN_WIDTH_40: + new_sta_bw = IEEE80211_STA_RX_BW_40; + break; + case NL80211_CHAN_WIDTH_80: + new_sta_bw = IEEE80211_STA_RX_BW_80; + break; + case NL80211_CHAN_WIDTH_80P80: + case NL80211_CHAN_WIDTH_160: + new_sta_bw = IEEE80211_STA_RX_BW_160; + break; + default: + return -EINVAL; + } - if (!(sta->sta.ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40)) - disable_40 = true; + if (new_sta_bw > sta->cur_max_bandwidth) + new_sta_bw = sta->cur_max_bandwidth; - if (disable_40 != (sta->sta.bandwidth < IEEE80211_STA_RX_BW_40)) { - if (disable_40) - sta->sta.bandwidth = IEEE80211_STA_RX_BW_20; - else - sta->sta.bandwidth = ieee80211_sta_cur_vht_bw(sta); + if (new_sta_bw < sta->sta.bandwidth) { + sta->sta.bandwidth = new_sta_bw; + rate_control_rate_update(local, sband, sta, + IEEE80211_RC_BW_CHANGED); + } - if (reconfig) - rate_control_rate_update(local, sband, sta, - IEEE80211_RC_BW_CHANGED); + ret = ieee80211_vif_change_bandwidth(sdata, &chandef, changed); + if (ret) { + sdata_info(sdata, + "AP %pM changed bandwidth to incompatible one - disconnect\n", + ifmgd->bssid); + return ret; + } + + if (new_sta_bw > sta->sta.bandwidth) { + sta->sta.bandwidth = new_sta_bw; + rate_control_rate_update(local, sband, sta, + IEEE80211_RC_BW_CHANGED); } ht_opmode = le16_to_cpu(ht_oper->operation_mode); /* if bss configuration changed store the new one */ - if (!reconfig || (sdata->vif.bss_conf.ht_operation_mode != ht_opmode)) { - changed |= BSS_CHANGED_HT; + if (sdata->vif.bss_conf.ht_operation_mode != ht_opmode) { + *changed |= BSS_CHANGED_HT; sdata->vif.bss_conf.ht_operation_mode = ht_opmode; } - return changed; + return 0; } /* frame sending functions */ @@ -2377,6 +2446,24 @@ static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata, ifmgd->aid = aid; + /* + * We previously checked these in the beacon/probe response, so + * they should be present here. This is just a safety net. + */ + if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT) && + (!elems.wmm_param || !elems.ht_cap_elem || !elems.ht_operation)) { + sdata_info(sdata, + "HT AP is missing WMM params or HT capability/operation in AssocResp\n"); + return false; + } + + if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) && + (!elems.vht_cap_elem || !elems.vht_operation)) { + sdata_info(sdata, + "VHT AP is missing VHT capability/operation in AssocResp\n"); + return false; + } + mutex_lock(&sdata->local->sta_mtx); /* * station info was already allocated and inserted before @@ -2390,6 +2477,7 @@ static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata, sband = local->hw.wiphy->bands[ieee80211_get_sdata_band(sdata)]; + /* Set up internal HT/VHT capabilities */ if (elems.ht_cap_elem && !(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband, elems.ht_cap_elem, sta); @@ -2398,11 +2486,12 @@ static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata, ieee80211_vht_cap_ie_to_sta_vht_cap(sdata, sband, elems.vht_cap_elem, sta); - if (elems.ht_operation && elems.wmm_param && - !(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) - changed |= ieee80211_config_ht_tx(sdata, sta, - elems.ht_operation, - cbss->bssid, false); + /* + * Some APs, e.g. Netgear WNDR3700, report invalid HT operation data + * in their association response, so ignore that data for our own + * configuration. If it changed since the last beacon, we'll get the + * next beacon and update then. + */ /* * If an operating mode notification IE is present, override the @@ -2679,10 +2768,10 @@ static const u64 care_about_ies = (1ULL << WLAN_EID_HT_CAPABILITY) | (1ULL << WLAN_EID_HT_OPERATION); -static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, - struct ieee80211_mgmt *mgmt, - size_t len, - struct ieee80211_rx_status *rx_status) +static enum rx_mgmt_action +ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, + struct ieee80211_mgmt *mgmt, size_t len, + u8 *deauth_buf, struct ieee80211_rx_status *rx_status) { struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf; @@ -2703,18 +2792,18 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, /* Process beacon from the current BSS */ baselen = (u8 *) mgmt->u.beacon.variable - (u8 *) mgmt; if (baselen > len) - return; + return RX_MGMT_NONE; rcu_read_lock(); chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); if (!chanctx_conf) { rcu_read_unlock(); - return; + return RX_MGMT_NONE; } if (rx_status->freq != chanctx_conf->def.chan->center_freq) { rcu_read_unlock(); - return; + return RX_MGMT_NONE; } chan = chanctx_conf->def.chan; rcu_read_unlock(); @@ -2742,12 +2831,12 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, ifmgd->assoc_data->timeout = jiffies; ifmgd->assoc_data->timeout_started = true; run_again(ifmgd, ifmgd->assoc_data->timeout); - return; + return RX_MGMT_NONE; } if (!ifmgd->associated || !ether_addr_equal(mgmt->bssid, ifmgd->associated->bssid)) - return; + return RX_MGMT_NONE; bssid = ifmgd->associated->bssid; /* Track average RSSI from the Beacon frames of the current AP */ @@ -2885,7 +2974,7 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, } if (ncrc == ifmgd->beacon_crc && ifmgd->beacon_crc_valid) - return; + return RX_MGMT_NONE; ifmgd->beacon_crc = ncrc; ifmgd->beacon_crc_valid = true; @@ -2934,11 +3023,14 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, mutex_lock(&local->sta_mtx); sta = sta_info_get(sdata, bssid); - if (elems.ht_cap_elem && elems.ht_operation && elems.wmm_param && - !(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) - changed |= ieee80211_config_ht_tx(sdata, sta, - elems.ht_operation, - bssid, true); + if (ieee80211_config_bw(sdata, sta, elems.ht_operation, + elems.vht_operation, bssid, &changed)) { + mutex_unlock(&local->sta_mtx); + ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, + WLAN_REASON_DEAUTH_LEAVING, + true, deauth_buf); + return RX_MGMT_CFG80211_TX_DEAUTH; + } if (sta && elems.opmode_notif) ieee80211_vht_handle_opmode(sdata, sta, *elems.opmode_notif, @@ -2954,6 +3046,8 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, elems.pwr_constr_elem); ieee80211_bss_info_change_notify(sdata, changed); + + return RX_MGMT_NONE; } void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata, @@ -2964,6 +3058,7 @@ void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata, struct ieee80211_mgmt *mgmt; struct cfg80211_bss *bss = NULL; enum rx_mgmt_action rma = RX_MGMT_NONE; + u8 deauth_buf[IEEE80211_DEAUTH_FRAME_LEN]; u16 fc; rx_status = (struct ieee80211_rx_status *) skb->cb; @@ -2974,7 +3069,8 @@ void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata, switch (fc & IEEE80211_FCTL_STYPE) { case IEEE80211_STYPE_BEACON: - ieee80211_rx_mgmt_beacon(sdata, mgmt, skb->len, rx_status); + rma = ieee80211_rx_mgmt_beacon(sdata, mgmt, skb->len, + deauth_buf, rx_status); break; case IEEE80211_STYPE_PROBE_RESP: ieee80211_rx_mgmt_probe_resp(sdata, skb); @@ -3023,6 +3119,10 @@ void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata, case RX_MGMT_CFG80211_ASSOC_TIMEOUT: cfg80211_send_assoc_timeout(sdata->dev, mgmt->bssid); break; + case RX_MGMT_CFG80211_TX_DEAUTH: + cfg80211_send_deauth(sdata->dev, deauth_buf, + sizeof(deauth_buf)); + break; default: WARN(1, "unexpected: %d", rma); } @@ -3620,7 +3720,7 @@ static int ieee80211_prep_channel(struct ieee80211_sub_if_data *sdata, ifmgd->flags |= ieee80211_determine_chantype(sdata, sband, cbss->channel, ht_oper, vht_oper, - &chandef); + &chandef, true); sdata->needed_rx_chains = min(ieee80211_ht_vht_rx_chains(sdata, cbss), local->rx_chains); From c7a6ee27abd46247c1c7edfc49fb935138da7875 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 12 Dec 2012 17:50:39 +0100 Subject: [PATCH 197/209] cfg80211: allow drivers to selectively disable 80/160 MHz Some drivers might support 80 or 160 MHz only on some channels for whatever reason, so allow them to disable these channel widths. Also maintain the new flags when regulatory bandwidth limitations would disable these wide channels. Reviewed-by: Luis R. Rodriguez Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 12 ++++++++++++ net/wireless/chan.c | 13 ++++++++++++- net/wireless/reg.c | 8 ++++++++ 3 files changed, 32 insertions(+), 1 deletion(-) diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index ee11a3db730b..8a9200f2f4a4 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -100,6 +100,16 @@ enum ieee80211_band { * @IEEE80211_CHAN_NO_HT40MINUS: extension channel below this channel * is not permitted. * @IEEE80211_CHAN_NO_OFDM: OFDM is not allowed on this channel. + * @IEEE80211_CHAN_NO_80MHZ: If the driver supports 80 MHz on the band, + * this flag indicates that an 80 MHz channel cannot use this + * channel as the control or any of the secondary channels. + * This may be due to the driver or due to regulatory bandwidth + * restrictions. + * @IEEE80211_CHAN_NO_160MHZ: If the driver supports 160 MHz on the band, + * this flag indicates that an 160 MHz channel cannot use this + * channel as the control or any of the secondary channels. + * This may be due to the driver or due to regulatory bandwidth + * restrictions. */ enum ieee80211_channel_flags { IEEE80211_CHAN_DISABLED = 1<<0, @@ -109,6 +119,8 @@ enum ieee80211_channel_flags { IEEE80211_CHAN_NO_HT40PLUS = 1<<4, IEEE80211_CHAN_NO_HT40MINUS = 1<<5, IEEE80211_CHAN_NO_OFDM = 1<<6, + IEEE80211_CHAN_NO_80MHZ = 1<<7, + IEEE80211_CHAN_NO_160MHZ = 1<<8, }; #define IEEE80211_CHAN_NO_HT40 \ diff --git a/net/wireless/chan.c b/net/wireless/chan.c index 810c23cfb894..fd556ac05fdb 100644 --- a/net/wireless/chan.c +++ b/net/wireless/chan.c @@ -375,6 +375,7 @@ bool cfg80211_chandef_usable(struct wiphy *wiphy, case NL80211_CHAN_WIDTH_80: if (!vht_cap->vht_supported) return false; + prohibited_flags |= IEEE80211_CHAN_NO_80MHZ; width = 80; break; case NL80211_CHAN_WIDTH_160: @@ -382,6 +383,7 @@ bool cfg80211_chandef_usable(struct wiphy *wiphy, return false; if (!(vht_cap->cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ)) return false; + prohibited_flags |= IEEE80211_CHAN_NO_160MHZ; width = 160; break; default: @@ -389,7 +391,16 @@ bool cfg80211_chandef_usable(struct wiphy *wiphy, return false; } - /* TODO: missing regulatory check on 80/160 bandwidth */ + /* + * TODO: What if there are only certain 80/160/80+80 MHz channels + * allowed by the driver, or only certain combinations? + * For 40 MHz the driver can set the NO_HT40 flags, but for + * 80/160 MHz and in particular 80+80 MHz this isn't really + * feasible and we only have NO_80MHZ/NO_160MHZ so far but + * no way to cover 80+80 MHz or more complex restrictions. + * Note that such restrictions also need to be advertised to + * userspace, for example for P2P channel selection. + */ if (width > 20) prohibited_flags |= IEEE80211_CHAN_NO_OFDM; diff --git a/net/wireless/reg.c b/net/wireless/reg.c index e97d5b071ab6..93ab840957a0 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -866,6 +866,10 @@ static void handle_channel(struct wiphy *wiphy, if (freq_range->max_bandwidth_khz < MHZ_TO_KHZ(40)) bw_flags = IEEE80211_CHAN_NO_HT40; + if (freq_range->max_bandwidth_khz < MHZ_TO_KHZ(80)) + bw_flags |= IEEE80211_CHAN_NO_80MHZ; + if (freq_range->max_bandwidth_khz < MHZ_TO_KHZ(160)) + bw_flags |= IEEE80211_CHAN_NO_160MHZ; if (lr->initiator == NL80211_REGDOM_SET_BY_DRIVER && request_wiphy && request_wiphy == wiphy && @@ -1264,6 +1268,10 @@ static void handle_channel_custom(struct wiphy *wiphy, if (freq_range->max_bandwidth_khz < MHZ_TO_KHZ(40)) bw_flags = IEEE80211_CHAN_NO_HT40; + if (freq_range->max_bandwidth_khz < MHZ_TO_KHZ(80)) + bw_flags |= IEEE80211_CHAN_NO_80MHZ; + if (freq_range->max_bandwidth_khz < MHZ_TO_KHZ(160)) + bw_flags |= IEEE80211_CHAN_NO_160MHZ; chan->flags |= map_regdom_flags(reg_rule->flags) | bw_flags; chan->max_antenna_gain = (int) MBI_TO_DBI(power_rule->max_antenna_gain); From 50640f169372b9977487a328dedf13a8debedff7 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 12 Dec 2012 17:59:39 +0100 Subject: [PATCH 198/209] nl80211: advertise HT/VHT channel limitations When drivers or regulatory have limitations on 40, 80 or 160 MHz channels, advertise these to userspace via nl80211. Also add a new feature flag to let userspace know this is supported. Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 17 +++++++++++++++++ net/wireless/core.c | 3 ++- net/wireless/nl80211.c | 12 ++++++++++++ 3 files changed, 31 insertions(+), 1 deletion(-) diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 90b7af86f392..3880f6ad7ed1 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -2041,6 +2041,16 @@ enum nl80211_band_attr { * (enum nl80211_dfs_state) * @NL80211_FREQUENCY_ATTR_DFS_TIME: time in miliseconds for how long * this channel is in this DFS state. + * @NL80211_FREQUENCY_ATTR_NO_HT40_MINUS: HT40- isn't possible with this + * channel as the control channel + * @NL80211_FREQUENCY_ATTR_NO_HT40_PLUS: HT40+ isn't possible with this + * channel as the control channel + * @NL80211_FREQUENCY_ATTR_NO_80MHZ: any 80 MHz channel using this channel + * as the primary or any of the secondary channels isn't possible, + * this includes 80+80 channels + * @NL80211_FREQUENCY_ATTR_NO_160MHZ: any 160 MHz (but not 80+80) channel + * using this channel as the primary or any of the secondary channels + * isn't possible * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number * currently defined * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use @@ -2055,6 +2065,10 @@ enum nl80211_frequency_attr { NL80211_FREQUENCY_ATTR_MAX_TX_POWER, NL80211_FREQUENCY_ATTR_DFS_STATE, NL80211_FREQUENCY_ATTR_DFS_TIME, + NL80211_FREQUENCY_ATTR_NO_HT40_MINUS, + NL80211_FREQUENCY_ATTR_NO_HT40_PLUS, + NL80211_FREQUENCY_ATTR_NO_80MHZ, + NL80211_FREQUENCY_ATTR_NO_160MHZ, /* keep last */ __NL80211_FREQUENCY_ATTR_AFTER_LAST, @@ -3421,6 +3435,8 @@ enum nl80211_ap_sme_features { * Note that even for drivers that support this, the default is to add * stations in authenticated/associated state, so to add unauthenticated * stations the authenticated/associated bits have to be set in the mask. + * @NL80211_FEATURE_ADVERTISE_CHAN_LIMITS: cfg80211 advertises channel limits + * (HT40, VHT 80/160 MHz) if this flag is set */ enum nl80211_feature_flags { NL80211_FEATURE_SK_TX_STATUS = 1 << 0, @@ -3437,6 +3453,7 @@ enum nl80211_feature_flags { NL80211_FEATURE_P2P_GO_CTWIN = 1 << 11, NL80211_FEATURE_P2P_GO_OPPPS = 1 << 12, NL80211_FEATURE_FULL_AP_CLIENT_STATE = 1 << 13, + NL80211_FEATURE_ADVERTISE_CHAN_LIMITS = 1 << 14, }; /** diff --git a/net/wireless/core.c b/net/wireless/core.c index 922002105062..33b75b9b8efa 100644 --- a/net/wireless/core.c +++ b/net/wireless/core.c @@ -367,7 +367,8 @@ struct wiphy *wiphy_new(const struct cfg80211_ops *ops, int sizeof_priv) rdev->wiphy.rts_threshold = (u32) -1; rdev->wiphy.coverage_class = 0; - rdev->wiphy.features = NL80211_FEATURE_SCAN_FLUSH; + rdev->wiphy.features = NL80211_FEATURE_SCAN_FLUSH | + NL80211_FEATURE_ADVERTISE_CHAN_LIMITS; return &rdev->wiphy; } diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index c1e18ccf4049..7e40b9e82b45 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -562,6 +562,18 @@ static int nl80211_msg_put_channel(struct sk_buff *msg, if (nla_put_u32(msg, NL80211_FREQUENCY_ATTR_DFS_TIME, time)) goto nla_put_failure; } + if ((chan->flags & IEEE80211_CHAN_NO_HT40MINUS) && + nla_put_flag(msg, NL80211_FREQUENCY_ATTR_NO_HT40_MINUS)) + goto nla_put_failure; + if ((chan->flags & IEEE80211_CHAN_NO_HT40PLUS) && + nla_put_flag(msg, NL80211_FREQUENCY_ATTR_NO_HT40_PLUS)) + goto nla_put_failure; + if ((chan->flags & IEEE80211_CHAN_NO_80MHZ) && + nla_put_flag(msg, NL80211_FREQUENCY_ATTR_NO_80MHZ)) + goto nla_put_failure; + if ((chan->flags & IEEE80211_CHAN_NO_160MHZ) && + nla_put_flag(msg, NL80211_FREQUENCY_ATTR_NO_160MHZ)) + goto nla_put_failure; if (nla_put_u32(msg, NL80211_FREQUENCY_ATTR_MAX_TX_POWER, DBM_TO_MBM(chan->max_power))) From 4a3cb702b05868f67c4ee3da3380461c5b90b4ca Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 12 Feb 2013 16:43:19 +0100 Subject: [PATCH 199/209] mac80211: constify IE parsing Make all the parsed IE pointers const, and propagate the change to all the users etc. Signed-off-by: Johannes Berg --- include/linux/ieee80211.h | 2 +- net/mac80211/ht.c | 2 +- net/mac80211/ieee80211_i.h | 87 +++++++++++++++++++------------------ net/mac80211/mesh.h | 11 ++--- net/mac80211/mesh_hwmp.c | 42 ++++++++++-------- net/mac80211/mesh_pathtbl.c | 11 ++--- net/mac80211/mlme.c | 15 ++++--- net/mac80211/util.c | 4 +- net/mac80211/vht.c | 9 ++-- 9 files changed, 96 insertions(+), 87 deletions(-) diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 12b5996533ec..e085fcf52b26 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -2152,7 +2152,7 @@ static inline unsigned long ieee80211_tu_to_usec(unsigned long tu) * @tim_len: length of the TIM IE * @aid: the AID to look for */ -static inline bool ieee80211_check_tim(struct ieee80211_tim_ie *tim, +static inline bool ieee80211_check_tim(const struct ieee80211_tim_ie *tim, u8 tim_len, u16 aid) { u8 mask; diff --git a/net/mac80211/ht.c b/net/mac80211/ht.c index 797969bc26e1..b84147ac5b4c 100644 --- a/net/mac80211/ht.c +++ b/net/mac80211/ht.c @@ -94,7 +94,7 @@ void ieee80211_apply_htcap_overrides(struct ieee80211_sub_if_data *sdata, bool ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_sub_if_data *sdata, struct ieee80211_supported_band *sband, - struct ieee80211_ht_cap *ht_cap_ie, + const struct ieee80211_ht_cap *ht_cap_ie, struct sta_info *sta) { struct ieee80211_sta_ht_cap ht_cap; diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index d1074442f1b5..d702f7dc321b 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1163,41 +1163,41 @@ struct ieee80211_ra_tid { /* Parsed Information Elements */ struct ieee802_11_elems { - u8 *ie_start; + const u8 *ie_start; size_t total_len; /* pointers to IEs */ - u8 *ssid; - u8 *supp_rates; - u8 *fh_params; - u8 *ds_params; - u8 *cf_params; - struct ieee80211_tim_ie *tim; - u8 *ibss_params; - u8 *challenge; - u8 *rsn; - u8 *erp_info; - u8 *ext_supp_rates; - u8 *wmm_info; - u8 *wmm_param; - struct ieee80211_ht_cap *ht_cap_elem; - struct ieee80211_ht_operation *ht_operation; - struct ieee80211_vht_cap *vht_cap_elem; - struct ieee80211_vht_operation *vht_operation; - struct ieee80211_meshconf_ie *mesh_config; - u8 *mesh_id; - u8 *peering; - __le16 *awake_window; - u8 *preq; - u8 *prep; - u8 *perr; - struct ieee80211_rann_ie *rann; - struct ieee80211_channel_sw_ie *ch_switch_ie; - u8 *country_elem; - u8 *pwr_constr_elem; - u8 *quiet_elem; /* first quite element */ - u8 *timeout_int; - u8 *opmode_notif; + const u8 *ssid; + const u8 *supp_rates; + const u8 *fh_params; + const u8 *ds_params; + const u8 *cf_params; + const struct ieee80211_tim_ie *tim; + const u8 *ibss_params; + const u8 *challenge; + const u8 *rsn; + const u8 *erp_info; + const u8 *ext_supp_rates; + const u8 *wmm_info; + const u8 *wmm_param; + const struct ieee80211_ht_cap *ht_cap_elem; + const struct ieee80211_ht_operation *ht_operation; + const struct ieee80211_vht_cap *vht_cap_elem; + const struct ieee80211_vht_operation *vht_operation; + const struct ieee80211_meshconf_ie *mesh_config; + const u8 *mesh_id; + const u8 *peering; + const __le16 *awake_window; + const u8 *preq; + const u8 *prep; + const u8 *perr; + const struct ieee80211_rann_ie *rann; + const struct ieee80211_channel_sw_ie *ch_switch_ie; + const u8 *country_elem; + const u8 *pwr_constr_elem; + const u8 *quiet_elem; /* first quite element */ + const u8 *timeout_int; + const u8 *opmode_notif; /* length of them, respectively */ u8 ssid_len; @@ -1276,10 +1276,10 @@ void ieee80211_recalc_ps_vif(struct ieee80211_sub_if_data *sdata); int ieee80211_max_network_latency(struct notifier_block *nb, unsigned long data, void *dummy); int ieee80211_set_arp_filter(struct ieee80211_sub_if_data *sdata); -void ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata, - struct ieee80211_channel_sw_ie *sw_elem, - struct ieee80211_bss *bss, - u64 timestamp); +void +ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata, + const struct ieee80211_channel_sw_ie *sw_elem, + struct ieee80211_bss *bss, u64 timestamp); void ieee80211_sta_quiesce(struct ieee80211_sub_if_data *sdata); void ieee80211_sta_restart(struct ieee80211_sub_if_data *sdata); void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata); @@ -1387,7 +1387,7 @@ void ieee80211_apply_htcap_overrides(struct ieee80211_sub_if_data *sdata, struct ieee80211_sta_ht_cap *ht_cap); bool ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_sub_if_data *sdata, struct ieee80211_supported_band *sband, - struct ieee80211_ht_cap *ht_cap_ie, + const struct ieee80211_ht_cap *ht_cap_ie, struct sta_info *sta); void ieee80211_send_delba(struct ieee80211_sub_if_data *sdata, const u8 *da, u16 tid, @@ -1428,10 +1428,11 @@ void ieee80211_release_reorder_timeout(struct sta_info *sta, int tid); u8 ieee80211_mcs_to_chains(const struct ieee80211_mcs_info *mcs); /* VHT */ -void ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data *sdata, - struct ieee80211_supported_band *sband, - struct ieee80211_vht_cap *vht_cap_ie, - struct sta_info *sta); +void +ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data *sdata, + struct ieee80211_supported_band *sband, + const struct ieee80211_vht_cap *vht_cap_ie, + struct sta_info *sta); enum ieee80211_sta_rx_bandwidth ieee80211_sta_cur_vht_bw(struct sta_info *sta); void ieee80211_sta_set_rx_nss(struct sta_info *sta); void ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata, @@ -1555,7 +1556,7 @@ static inline void ieee80211_add_pending_skbs(struct ieee80211_local *local, void ieee80211_send_auth(struct ieee80211_sub_if_data *sdata, u16 transaction, u16 auth_alg, u16 status, - u8 *extra, size_t extra_len, const u8 *bssid, + const u8 *extra, size_t extra_len, const u8 *bssid, const u8 *da, const u8 *key, u8 key_len, u8 key_idx, u32 tx_flags); void ieee80211_send_deauth_disassoc(struct ieee80211_sub_if_data *sdata, @@ -1606,7 +1607,7 @@ int ieee80211_add_ext_srates_ie(struct ieee80211_sub_if_data *sdata, /* channel management */ void ieee80211_ht_oper_to_chandef(struct ieee80211_channel *control_chan, - struct ieee80211_ht_operation *ht_oper, + const struct ieee80211_ht_operation *ht_oper, struct cfg80211_chan_def *chandef); int __must_check diff --git a/net/mac80211/mesh.h b/net/mac80211/mesh.h index 7ad035f0cacc..a1bad310f2e9 100644 --- a/net/mac80211/mesh.h +++ b/net/mac80211/mesh.h @@ -265,8 +265,8 @@ int mesh_nexthop_lookup(struct sk_buff *skb, int mesh_nexthop_resolve(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata); void mesh_path_start_discovery(struct ieee80211_sub_if_data *sdata); -struct mesh_path *mesh_path_lookup(u8 *dst, - struct ieee80211_sub_if_data *sdata); +struct mesh_path *mesh_path_lookup(const u8 *dst, + struct ieee80211_sub_if_data *sdata); struct mesh_path *mpp_path_lookup(u8 *dst, struct ieee80211_sub_if_data *sdata); int mpp_path_add(u8 *dst, u8 *mpp, struct ieee80211_sub_if_data *sdata); @@ -276,7 +276,7 @@ void mesh_path_fix_nexthop(struct mesh_path *mpath, struct sta_info *next_hop); void mesh_path_expire(struct ieee80211_sub_if_data *sdata); void mesh_rx_path_sel_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_mgmt *mgmt, size_t len); -int mesh_path_add(u8 *dst, struct ieee80211_sub_if_data *sdata); +int mesh_path_add(const u8 *dst, struct ieee80211_sub_if_data *sdata); int mesh_path_add_gate(struct mesh_path *mpath); int mesh_path_send_to_gates(struct mesh_path *mpath); @@ -301,8 +301,9 @@ void mesh_sta_cleanup(struct sta_info *sta); void mesh_mpath_table_grow(void); void mesh_mpp_table_grow(void); /* Mesh paths */ -int mesh_path_error_tx(u8 ttl, u8 *target, __le32 target_sn, __le16 target_rcode, - const u8 *ra, struct ieee80211_sub_if_data *sdata); +int mesh_path_error_tx(u8 ttl, const u8 *target, __le32 target_sn, + __le16 target_rcode, const u8 *ra, + struct ieee80211_sub_if_data *sdata); void mesh_path_assign_nexthop(struct mesh_path *mpath, struct sta_info *sta); void mesh_path_flush_pending(struct mesh_path *mpath); void mesh_path_tx_pending(struct mesh_path *mpath); diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c index f0dd8742ed42..585c1e26cca8 100644 --- a/net/mac80211/mesh_hwmp.c +++ b/net/mac80211/mesh_hwmp.c @@ -30,14 +30,14 @@ static void mesh_queue_preq(struct mesh_path *, u8); -static inline u32 u32_field_get(u8 *preq_elem, int offset, bool ae) +static inline u32 u32_field_get(const u8 *preq_elem, int offset, bool ae) { if (ae) offset += 6; return get_unaligned_le32(preq_elem + offset); } -static inline u32 u16_field_get(u8 *preq_elem, int offset, bool ae) +static inline u32 u16_field_get(const u8 *preq_elem, int offset, bool ae) { if (ae) offset += 6; @@ -102,10 +102,13 @@ enum mpath_frame_type { static const u8 broadcast_addr[ETH_ALEN] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff}; static int mesh_path_sel_frame_tx(enum mpath_frame_type action, u8 flags, - u8 *orig_addr, __le32 orig_sn, u8 target_flags, u8 *target, - __le32 target_sn, const u8 *da, u8 hop_count, u8 ttl, - __le32 lifetime, __le32 metric, __le32 preq_id, - struct ieee80211_sub_if_data *sdata) + const u8 *orig_addr, __le32 orig_sn, + u8 target_flags, const u8 *target, + __le32 target_sn, const u8 *da, + u8 hop_count, u8 ttl, + __le32 lifetime, __le32 metric, + __le32 preq_id, + struct ieee80211_sub_if_data *sdata) { struct ieee80211_local *local = sdata->local; struct sk_buff *skb; @@ -235,7 +238,7 @@ static void prepare_frame_for_deferred_tx(struct ieee80211_sub_if_data *sdata, * also acquires in the TX path. To avoid a deadlock we don't transmit the * frame directly but add it to the pending queue instead. */ -int mesh_path_error_tx(u8 ttl, u8 *target, __le32 target_sn, +int mesh_path_error_tx(u8 ttl, const u8 *target, __le32 target_sn, __le16 target_rcode, const u8 *ra, struct ieee80211_sub_if_data *sdata) { @@ -369,14 +372,14 @@ static u32 airtime_link_metric_get(struct ieee80211_local *local, * path routing information is updated. */ static u32 hwmp_route_info_get(struct ieee80211_sub_if_data *sdata, - struct ieee80211_mgmt *mgmt, - u8 *hwmp_ie, enum mpath_frame_type action) + struct ieee80211_mgmt *mgmt, + const u8 *hwmp_ie, enum mpath_frame_type action) { struct ieee80211_local *local = sdata->local; struct mesh_path *mpath; struct sta_info *sta; bool fresh_info; - u8 *orig_addr, *ta; + const u8 *orig_addr, *ta; u32 orig_sn, orig_metric; unsigned long orig_lifetime, exp_time; u32 last_hop_metric, new_metric; @@ -511,11 +514,11 @@ static u32 hwmp_route_info_get(struct ieee80211_sub_if_data *sdata, static void hwmp_preq_frame_process(struct ieee80211_sub_if_data *sdata, struct ieee80211_mgmt *mgmt, - u8 *preq_elem, u32 metric) + const u8 *preq_elem, u32 metric) { struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; struct mesh_path *mpath = NULL; - u8 *target_addr, *orig_addr; + const u8 *target_addr, *orig_addr; const u8 *da; u8 target_flags, ttl, flags; u32 orig_sn, target_sn, lifetime, orig_metric; @@ -648,11 +651,11 @@ next_hop_deref_protected(struct mesh_path *mpath) static void hwmp_prep_frame_process(struct ieee80211_sub_if_data *sdata, struct ieee80211_mgmt *mgmt, - u8 *prep_elem, u32 metric) + const u8 *prep_elem, u32 metric) { struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; struct mesh_path *mpath; - u8 *target_addr, *orig_addr; + const u8 *target_addr, *orig_addr; u8 ttl, hopcount, flags; u8 next_hop[ETH_ALEN]; u32 target_sn, orig_sn, lifetime; @@ -711,12 +714,13 @@ fail: } static void hwmp_perr_frame_process(struct ieee80211_sub_if_data *sdata, - struct ieee80211_mgmt *mgmt, u8 *perr_elem) + struct ieee80211_mgmt *mgmt, + const u8 *perr_elem) { struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; struct mesh_path *mpath; u8 ttl; - u8 *ta, *target_addr; + const u8 *ta, *target_addr; u32 target_sn; u16 target_rcode; @@ -758,15 +762,15 @@ endperr: } static void hwmp_rann_frame_process(struct ieee80211_sub_if_data *sdata, - struct ieee80211_mgmt *mgmt, - struct ieee80211_rann_ie *rann) + struct ieee80211_mgmt *mgmt, + const struct ieee80211_rann_ie *rann) { struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; struct ieee80211_local *local = sdata->local; struct sta_info *sta; struct mesh_path *mpath; u8 ttl, flags, hopcount; - u8 *orig_addr; + const u8 *orig_addr; u32 orig_sn, metric, metric_txsta, interval; bool root_is_gate; diff --git a/net/mac80211/mesh_pathtbl.c b/net/mac80211/mesh_pathtbl.c index d5786c3eaee2..2ce4c4023a97 100644 --- a/net/mac80211/mesh_pathtbl.c +++ b/net/mac80211/mesh_pathtbl.c @@ -181,7 +181,7 @@ errcopy: return -ENOMEM; } -static u32 mesh_table_hash(u8 *addr, struct ieee80211_sub_if_data *sdata, +static u32 mesh_table_hash(const u8 *addr, struct ieee80211_sub_if_data *sdata, struct mesh_table *tbl) { /* Use last four bytes of hw addr and interface index as hash index */ @@ -326,8 +326,8 @@ static void mesh_path_move_to_queue(struct mesh_path *gate_mpath, } -static struct mesh_path *mpath_lookup(struct mesh_table *tbl, u8 *dst, - struct ieee80211_sub_if_data *sdata) +static struct mesh_path *mpath_lookup(struct mesh_table *tbl, const u8 *dst, + struct ieee80211_sub_if_data *sdata) { struct mesh_path *mpath; struct hlist_node *n; @@ -359,7 +359,8 @@ static struct mesh_path *mpath_lookup(struct mesh_table *tbl, u8 *dst, * * Locking: must be called within a read rcu section. */ -struct mesh_path *mesh_path_lookup(u8 *dst, struct ieee80211_sub_if_data *sdata) +struct mesh_path *mesh_path_lookup(const u8 *dst, + struct ieee80211_sub_if_data *sdata) { return mpath_lookup(rcu_dereference(mesh_paths), dst, sdata); } @@ -494,7 +495,7 @@ int mesh_gate_num(struct ieee80211_sub_if_data *sdata) * * State: the initial state of the new path is set to 0 */ -int mesh_path_add(u8 *dst, struct ieee80211_sub_if_data *sdata) +int mesh_path_add(const u8 *dst, struct ieee80211_sub_if_data *sdata) { struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; struct ieee80211_local *local = sdata->local; diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 05b229e3b226..7a8cd789e487 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1041,10 +1041,10 @@ static void ieee80211_chswitch_timer(unsigned long data) ieee80211_queue_work(&sdata->local->hw, &ifmgd->chswitch_work); } -void ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata, - struct ieee80211_channel_sw_ie *sw_elem, - struct ieee80211_bss *bss, - u64 timestamp) +void +ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata, + const struct ieee80211_channel_sw_ie *sw_elem, + struct ieee80211_bss *bss, u64 timestamp) { struct cfg80211_bss *cbss = container_of((void *)bss, struct cfg80211_bss, priv); @@ -1479,13 +1479,14 @@ void ieee80211_dfs_cac_timer_work(struct work_struct *work) /* MLME */ static bool ieee80211_sta_wmm_params(struct ieee80211_local *local, struct ieee80211_sub_if_data *sdata, - u8 *wmm_param, size_t wmm_param_len) + const u8 *wmm_param, size_t wmm_param_len) { struct ieee80211_tx_queue_params params; struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; size_t left; int count; - u8 *pos, uapsd_queues = 0; + const u8 *pos; + u8 uapsd_queues = 0; if (!local->ops->conf_tx) return false; @@ -2670,7 +2671,7 @@ static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata, need_ps = sdata->u.mgd.associated && !sdata->u.mgd.dtim_period; if (elems->tim && !elems->parse_error) { - struct ieee80211_tim_ie *tim_ie = elems->tim; + const struct ieee80211_tim_ie *tim_ie = elems->tim; sdata->u.mgd.dtim_period = tim_ie->dtim_period; } } diff --git a/net/mac80211/util.c b/net/mac80211/util.c index e24ff38606a9..0f38f43ac62e 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -1035,7 +1035,7 @@ u32 ieee80211_mandatory_rates(struct ieee80211_local *local, void ieee80211_send_auth(struct ieee80211_sub_if_data *sdata, u16 transaction, u16 auth_alg, u16 status, - u8 *extra, size_t extra_len, const u8 *da, + const u8 *extra, size_t extra_len, const u8 *da, const u8 *bssid, const u8 *key, u8 key_len, u8 key_idx, u32 tx_flags) { @@ -1947,7 +1947,7 @@ u8 *ieee80211_ie_build_ht_oper(u8 *pos, struct ieee80211_sta_ht_cap *ht_cap, } void ieee80211_ht_oper_to_chandef(struct ieee80211_channel *control_chan, - struct ieee80211_ht_operation *ht_oper, + const struct ieee80211_ht_operation *ht_oper, struct cfg80211_chan_def *chandef) { enum nl80211_channel_type channel_type; diff --git a/net/mac80211/vht.c b/net/mac80211/vht.c index a9549fcc5a04..a2c2258bc84e 100644 --- a/net/mac80211/vht.c +++ b/net/mac80211/vht.c @@ -13,10 +13,11 @@ #include "rate.h" -void ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data *sdata, - struct ieee80211_supported_band *sband, - struct ieee80211_vht_cap *vht_cap_ie, - struct sta_info *sta) +void +ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data *sdata, + struct ieee80211_supported_band *sband, + const struct ieee80211_vht_cap *vht_cap_ie, + struct sta_info *sta) { struct ieee80211_sta_vht_cap *vht_cap = &sta->sta.vht_cap; From 2b5e19677592c167d012c2d129407f39d2bdeb8d Mon Sep 17 00:00:00 2001 From: Thomas Pedersen Date: Thu, 14 Feb 2013 11:20:13 -0800 Subject: [PATCH 200/209] mac80211: cache mesh beacon Previously, the entire mesh beacon would be generated each time the beacon timer fired. Instead generate a beacon head and tail (so the TIM can easily be inserted when mesh power save is on) when starting a mesh or the MBSS parameters change. Also add a mutex for protecting beacon updates and preventing leaks. Signed-off-by: Thomas Pedersen Signed-off-by: Johannes Berg --- net/mac80211/cfg.c | 9 +-- net/mac80211/ieee80211_i.h | 3 + net/mac80211/mesh.c | 154 ++++++++++++++++++++++++++++++++++++- net/mac80211/mesh.h | 5 +- net/mac80211/mesh_plink.c | 4 +- net/mac80211/tx.c | 61 ++------------- 6 files changed, 171 insertions(+), 65 deletions(-) diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index c3869ba42343..0800fb331ce5 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1800,11 +1800,10 @@ static int ieee80211_update_mesh_config(struct wiphy *wiphy, conf->power_mode = nconf->power_mode; ieee80211_mps_local_status_update(sdata); } - if (_chg_mesh_attr(NL80211_MESHCONF_AWAKE_WINDOW, mask)) { + if (_chg_mesh_attr(NL80211_MESHCONF_AWAKE_WINDOW, mask)) conf->dot11MeshAwakeWindowDuration = nconf->dot11MeshAwakeWindowDuration; - ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON); - } + ieee80211_mbss_info_change_notify(sdata, BSS_CHANGED_BEACON); return 0; } @@ -1830,9 +1829,7 @@ static int ieee80211_join_mesh(struct wiphy *wiphy, struct net_device *dev, if (err) return err; - ieee80211_start_mesh(sdata); - - return 0; + return ieee80211_start_mesh(sdata); } static int ieee80211_leave_mesh(struct wiphy *wiphy, struct net_device *dev) diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index d702f7dc321b..388580a1bada 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -580,6 +580,9 @@ struct ieee80211_if_mesh { u32 mesh_seqnum; bool accepting_plinks; int num_gates; + struct beacon_data __rcu *beacon; + /* just protects beacon updates for now */ + struct mutex mtx; const u8 *ie; u8 ie_len; enum { diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index 0adec3d539d3..6ff8ee9d9ff5 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -171,7 +171,7 @@ void mesh_sta_cleanup(struct sta_info *sta) } if (changed) - ieee80211_bss_info_change_notify(sdata, changed); + ieee80211_mbss_info_change_notify(sdata, changed); } int mesh_rmc_init(struct ieee80211_sub_if_data *sdata) @@ -593,7 +593,7 @@ static void ieee80211_mesh_housekeeping(struct ieee80211_sub_if_data *sdata, mesh_path_expire(sdata); changed = mesh_accept_plinks_update(sdata); - ieee80211_bss_info_change_notify(sdata, changed); + ieee80211_mbss_info_change_notify(sdata, changed); mod_timer(&ifmsh->housekeeping_timer, round_jiffies(jiffies + IEEE80211_MESH_HOUSEKEEPING_INTERVAL)); @@ -644,7 +644,140 @@ void ieee80211_mesh_restart(struct ieee80211_sub_if_data *sdata) } #endif -void ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata) +static int +ieee80211_mesh_build_beacon(struct ieee80211_if_mesh *ifmsh) +{ + struct beacon_data *bcn; + int head_len, tail_len; + struct sk_buff *skb; + struct ieee80211_mgmt *mgmt; + struct ieee80211_chanctx_conf *chanctx_conf; + enum ieee80211_band band; + u8 *pos; + struct ieee80211_sub_if_data *sdata; + int hdr_len = offsetof(struct ieee80211_mgmt, u.beacon) + + sizeof(mgmt->u.beacon); + + sdata = container_of(ifmsh, struct ieee80211_sub_if_data, u.mesh); + rcu_read_lock(); + chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); + band = chanctx_conf->def.chan->band; + rcu_read_unlock(); + + head_len = hdr_len + + 2 + /* NULL SSID */ + 2 + 8 + /* supported rates */ + 2 + 3; /* DS params */ + tail_len = 2 + (IEEE80211_MAX_SUPP_RATES - 8) + + 2 + sizeof(struct ieee80211_ht_cap) + + 2 + sizeof(struct ieee80211_ht_operation) + + 2 + ifmsh->mesh_id_len + + 2 + sizeof(struct ieee80211_meshconf_ie) + + 2 + sizeof(__le16) + /* awake window */ + ifmsh->ie_len; + + bcn = kzalloc(sizeof(*bcn) + head_len + tail_len, GFP_KERNEL); + /* need an skb for IE builders to operate on */ + skb = dev_alloc_skb(max(head_len, tail_len)); + + if (!bcn || !skb) + goto out_free; + + /* + * pointers go into the block we allocated, + * memory is | beacon_data | head | tail | + */ + bcn->head = ((u8 *) bcn) + sizeof(*bcn); + + /* fill in the head */ + mgmt = (struct ieee80211_mgmt *) skb_put(skb, hdr_len); + memset(mgmt, 0, hdr_len); + mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | + IEEE80211_STYPE_BEACON); + eth_broadcast_addr(mgmt->da); + memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN); + memcpy(mgmt->bssid, sdata->vif.addr, ETH_ALEN); + ieee80211_mps_set_frame_flags(sdata, NULL, (void *) mgmt); + mgmt->u.beacon.beacon_int = + cpu_to_le16(sdata->vif.bss_conf.beacon_int); + mgmt->u.beacon.capab_info |= cpu_to_le16( + sdata->u.mesh.security ? WLAN_CAPABILITY_PRIVACY : 0); + + pos = skb_put(skb, 2); + *pos++ = WLAN_EID_SSID; + *pos++ = 0x0; + + if (ieee80211_add_srates_ie(sdata, skb, true, band) || + mesh_add_ds_params_ie(skb, sdata)) + goto out_free; + + bcn->head_len = skb->len; + memcpy(bcn->head, skb->data, bcn->head_len); + + /* now the tail */ + skb_trim(skb, 0); + bcn->tail = bcn->head + bcn->head_len; + + if (ieee80211_add_ext_srates_ie(sdata, skb, true, band) || + mesh_add_rsn_ie(skb, sdata) || + mesh_add_ht_cap_ie(skb, sdata) || + mesh_add_ht_oper_ie(skb, sdata) || + mesh_add_meshid_ie(skb, sdata) || + mesh_add_meshconf_ie(skb, sdata) || + mesh_add_awake_window_ie(skb, sdata) || + mesh_add_vendor_ies(skb, sdata)) + goto out_free; + + bcn->tail_len = skb->len; + memcpy(bcn->tail, skb->data, bcn->tail_len); + + dev_kfree_skb(skb); + rcu_assign_pointer(ifmsh->beacon, bcn); + return 0; +out_free: + kfree(bcn); + dev_kfree_skb(skb); + return -ENOMEM; +} + +static int +ieee80211_mesh_rebuild_beacon(struct ieee80211_if_mesh *ifmsh) +{ + struct ieee80211_sub_if_data *sdata; + struct beacon_data *old_bcn; + int ret; + sdata = container_of(ifmsh, struct ieee80211_sub_if_data, u.mesh); + + mutex_lock(&ifmsh->mtx); + + old_bcn = rcu_dereference_protected(ifmsh->beacon, + lockdep_is_held(&ifmsh->mtx)); + ret = ieee80211_mesh_build_beacon(ifmsh); + if (ret) + /* just reuse old beacon */ + goto out; + + if (old_bcn) + kfree_rcu(old_bcn, rcu_head); +out: + mutex_unlock(&ifmsh->mtx); + return ret; +} + +void ieee80211_mbss_info_change_notify(struct ieee80211_sub_if_data *sdata, + u32 changed) +{ + if (sdata->vif.bss_conf.enable_beacon && + (changed & (BSS_CHANGED_BEACON | + BSS_CHANGED_HT | + BSS_CHANGED_BASIC_RATES | + BSS_CHANGED_BEACON_INT))) + if (ieee80211_mesh_rebuild_beacon(&sdata->u.mesh)) + return; + ieee80211_bss_info_change_notify(sdata, changed); +} + +int ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata) { struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; struct ieee80211_local *local = sdata->local; @@ -677,15 +810,22 @@ void ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata) changed |= ieee80211_mps_local_status_update(sdata); + if (ieee80211_mesh_build_beacon(ifmsh)) { + ieee80211_stop_mesh(sdata); + return -ENOMEM; + } + ieee80211_bss_info_change_notify(sdata, changed); netif_carrier_on(sdata->dev); + return 0; } void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata) { struct ieee80211_local *local = sdata->local; struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; + struct beacon_data *bcn; netif_carrier_off(sdata->dev); @@ -694,6 +834,12 @@ void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata) sdata->vif.bss_conf.enable_beacon = false; clear_bit(SDATA_STATE_OFFCHANNEL_BEACON_STOPPED, &sdata->state); ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED); + mutex_lock(&ifmsh->mtx); + bcn = rcu_dereference_protected(ifmsh->beacon, + lockdep_is_held(&ifmsh->mtx)); + rcu_assign_pointer(ifmsh->beacon, NULL); + kfree_rcu(bcn, rcu_head); + mutex_unlock(&ifmsh->mtx); /* flush STAs and mpaths on this iface */ sta_info_flush(sdata); @@ -883,6 +1029,8 @@ void ieee80211_mesh_init_sdata(struct ieee80211_sub_if_data *sdata) skb_queue_head_init(&ifmsh->ps.bc_buf); spin_lock_init(&ifmsh->mesh_preq_queue_lock); spin_lock_init(&ifmsh->sync_offset_lock); + RCU_INIT_POINTER(ifmsh->beacon, NULL); + mutex_init(&ifmsh->mtx); sdata->vif.bss_conf.bssid = zero_addr; } diff --git a/net/mac80211/mesh.h b/net/mac80211/mesh.h index a1bad310f2e9..1a1da877b1d2 100644 --- a/net/mac80211/mesh.h +++ b/net/mac80211/mesh.h @@ -239,10 +239,13 @@ void ieee80211s_update_metric(struct ieee80211_local *local, struct sta_info *sta, struct sk_buff *skb); void ieee80211s_stop(void); void ieee80211_mesh_init_sdata(struct ieee80211_sub_if_data *sdata); -void ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata); +int ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata); void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata); void ieee80211_mesh_root_setup(struct ieee80211_if_mesh *ifmsh); const struct ieee80211_mesh_sync_ops *ieee80211_mesh_sync_ops_get(u8 method); +/* wrapper for ieee80211_bss_info_change_notify() */ +void ieee80211_mbss_info_change_notify(struct ieee80211_sub_if_data *sdata, + u32 changed); /* mesh power save */ u32 ieee80211_mps_local_status_update(struct ieee80211_sub_if_data *sdata); diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c index 7765139b24aa..f7526e509aa8 100644 --- a/net/mac80211/mesh_plink.c +++ b/net/mac80211/mesh_plink.c @@ -508,7 +508,7 @@ void mesh_neighbour_update(struct ieee80211_sub_if_data *sdata, ieee80211_mps_frame_release(sta, elems); out: rcu_read_unlock(); - ieee80211_bss_info_change_notify(sdata, changed); + ieee80211_mbss_info_change_notify(sdata, changed); } static void mesh_plink_timer(unsigned long data) @@ -1090,5 +1090,5 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m rcu_read_unlock(); if (changed) - ieee80211_bss_info_change_notify(sdata, changed); + ieee80211_mbss_info_change_notify(sdata, changed); } diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 7d8c629f1e6a..fe644f91ae05 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -2444,71 +2444,26 @@ struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw, hdr->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_BEACON); } else if (ieee80211_vif_is_mesh(&sdata->vif)) { - struct ieee80211_mgmt *mgmt; struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; - u8 *pos; - int hdr_len = offsetof(struct ieee80211_mgmt, u.beacon) + - sizeof(mgmt->u.beacon); + struct beacon_data *bcn = rcu_dereference(ifmsh->beacon); -#ifdef CONFIG_MAC80211_MESH - if (!sdata->u.mesh.mesh_id_len) + if (!bcn) goto out; -#endif if (ifmsh->sync_ops) ifmsh->sync_ops->adjust_tbtt( sdata); skb = dev_alloc_skb(local->tx_headroom + - hdr_len + - 2 + /* NULL SSID */ - 2 + 8 + /* supported rates */ - 2 + 3 + /* DS params */ + bcn->head_len + 256 + /* TIM IE */ - 2 + (IEEE80211_MAX_SUPP_RATES - 8) + - 2 + sizeof(struct ieee80211_ht_cap) + - 2 + sizeof(struct ieee80211_ht_operation) + - 2 + sdata->u.mesh.mesh_id_len + - 2 + sizeof(struct ieee80211_meshconf_ie) + - sdata->u.mesh.ie_len + - 2 + sizeof(__le16)); /* awake window */ + bcn->tail_len); if (!skb) goto out; - - skb_reserve(skb, local->hw.extra_tx_headroom); - mgmt = (struct ieee80211_mgmt *) skb_put(skb, hdr_len); - memset(mgmt, 0, hdr_len); - mgmt->frame_control = - cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_BEACON); - eth_broadcast_addr(mgmt->da); - memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN); - memcpy(mgmt->bssid, sdata->vif.addr, ETH_ALEN); - ieee80211_mps_set_frame_flags(sdata, NULL, (void *) mgmt); - mgmt->u.beacon.beacon_int = - cpu_to_le16(sdata->vif.bss_conf.beacon_int); - mgmt->u.beacon.capab_info |= cpu_to_le16( - sdata->u.mesh.security ? WLAN_CAPABILITY_PRIVACY : 0); - - pos = skb_put(skb, 2); - *pos++ = WLAN_EID_SSID; - *pos++ = 0x0; - - band = chanctx_conf->def.chan->band; - - if (ieee80211_add_srates_ie(sdata, skb, true, band) || - mesh_add_ds_params_ie(skb, sdata) || - ieee80211_beacon_add_tim(sdata, &ifmsh->ps, skb) || - ieee80211_add_ext_srates_ie(sdata, skb, true, band) || - mesh_add_rsn_ie(skb, sdata) || - mesh_add_ht_cap_ie(skb, sdata) || - mesh_add_ht_oper_ie(skb, sdata) || - mesh_add_meshid_ie(skb, sdata) || - mesh_add_meshconf_ie(skb, sdata) || - mesh_add_awake_window_ie(skb, sdata) || - mesh_add_vendor_ies(skb, sdata)) { - pr_err("o11s: couldn't add ies!\n"); - goto out; - } + skb_reserve(skb, local->tx_headroom); + memcpy(skb_put(skb, bcn->head_len), bcn->head, bcn->head_len); + ieee80211_beacon_add_tim(sdata, &ifmsh->ps, skb); + memcpy(skb_put(skb, bcn->tail_len), bcn->tail, bcn->tail_len); } else { WARN_ON(1); goto out; From 9fb04b501a57ad29fa989ab3cd2123482e7eac5f Mon Sep 17 00:00:00 2001 From: Thomas Pedersen Date: Thu, 14 Feb 2013 11:20:14 -0800 Subject: [PATCH 201/209] mac80211: generate mesh probe responses Mesh interfaces will now respond to any broadcast (or matching directed mesh) probe requests with a probe response. Signed-off-by: Thomas Pedersen Signed-off-by: Johannes Berg --- net/mac80211/mesh.c | 60 +++++++++++++++++++++++++++++++++++++++++++++ net/mac80211/rx.c | 5 ++-- 2 files changed, 63 insertions(+), 2 deletions(-) diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index 6ff8ee9d9ff5..a77d40ed4e61 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -868,6 +868,63 @@ void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata) sdata->u.mesh.timers_running = 0; } +static void +ieee80211_mesh_rx_probe_req(struct ieee80211_sub_if_data *sdata, + struct ieee80211_mgmt *mgmt, size_t len) +{ + struct ieee80211_local *local = sdata->local; + struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; + struct sk_buff *presp; + struct beacon_data *bcn; + struct ieee80211_mgmt *hdr; + struct ieee802_11_elems elems; + size_t baselen; + u8 *pos, *end; + + end = ((u8 *) mgmt) + len; + pos = mgmt->u.probe_req.variable; + baselen = (u8 *) pos - (u8 *) mgmt; + if (baselen > len) + return; + + ieee802_11_parse_elems(pos, len - baselen, &elems); + + /* 802.11-2012 10.1.4.3.2 */ + if ((!ether_addr_equal(mgmt->da, sdata->vif.addr) && + !is_broadcast_ether_addr(mgmt->da)) || + elems.ssid_len != 0) + return; + + if (elems.mesh_id_len != 0 && + (elems.mesh_id_len != ifmsh->mesh_id_len || + memcmp(elems.mesh_id, ifmsh->mesh_id, ifmsh->mesh_id_len))) + return; + + rcu_read_lock(); + bcn = rcu_dereference(ifmsh->beacon); + + if (!bcn) + goto out; + + presp = dev_alloc_skb(local->tx_headroom + + bcn->head_len + bcn->tail_len); + if (!presp) + goto out; + + skb_reserve(presp, local->tx_headroom); + memcpy(skb_put(presp, bcn->head_len), bcn->head, bcn->head_len); + memcpy(skb_put(presp, bcn->tail_len), bcn->tail, bcn->tail_len); + hdr = (struct ieee80211_mgmt *) presp->data; + hdr->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | + IEEE80211_STYPE_PROBE_RESP); + memcpy(hdr->da, mgmt->sa, ETH_ALEN); + mpl_dbg(sdata, "sending probe resp. to %pM\n", hdr->da); + IEEE80211_SKB_CB(presp)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT; + ieee80211_tx_skb(sdata, presp); +out: + rcu_read_unlock(); +} + static void ieee80211_mesh_rx_bcn_presp(struct ieee80211_sub_if_data *sdata, u16 stype, struct ieee80211_mgmt *mgmt, @@ -957,6 +1014,9 @@ void ieee80211_mesh_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata, ieee80211_mesh_rx_bcn_presp(sdata, stype, mgmt, skb->len, rx_status); break; + case IEEE80211_STYPE_PROBE_REQ: + ieee80211_mesh_rx_probe_req(sdata, mgmt, skb->len); + break; case IEEE80211_STYPE_ACTION: ieee80211_mesh_rx_mgmt_action(sdata, mgmt, skb->len, rx_status); break; diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 30f1ba6de8f3..296a4aeadedc 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -2718,8 +2718,9 @@ ieee80211_rx_h_mgmt(struct ieee80211_rx_data *rx) return RX_DROP_MONITOR; break; case cpu_to_le16(IEEE80211_STYPE_PROBE_REQ): - /* process only for ibss */ - if (sdata->vif.type != NL80211_IFTYPE_ADHOC) + /* process only for ibss and mesh */ + if (sdata->vif.type != NL80211_IFTYPE_ADHOC && + sdata->vif.type != NL80211_IFTYPE_MESH_POINT) return RX_DROP_MONITOR; break; default: From af0ed69badc67a0b6e976543f52029fce9ac8f69 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 12 Feb 2013 14:21:00 +0100 Subject: [PATCH 202/209] mac80211: stop modifying HT SMPS capability Instead of modifying the HT SMPS capability field for stations, track the SMPS mode explicitly in a new field in the station struct and use it in the drivers that care about it. This simplifies the code using it. Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlegacy/4965-rs.c | 3 +-- drivers/net/wireless/iwlegacy/common.c | 16 +++++++--------- drivers/net/wireless/iwlwifi/dvm/rs.c | 6 ++---- drivers/net/wireless/iwlwifi/dvm/sta.c | 17 +++++++---------- drivers/net/wireless/iwlwifi/mvm/rs.c | 6 ++---- drivers/net/wireless/rt2x00/rt2x00queue.c | 5 +---- include/net/mac80211.h | 2 ++ net/mac80211/ht.c | 19 +++++++++++++++++++ net/mac80211/rc80211_minstrel_ht.c | 6 +----- net/mac80211/rx.c | 16 ++++++---------- net/mac80211/sta_info.c | 2 ++ 11 files changed, 50 insertions(+), 48 deletions(-) diff --git a/drivers/net/wireless/iwlegacy/4965-rs.c b/drivers/net/wireless/iwlegacy/4965-rs.c index f3b8e91aa3dc..e8324b5e5bfe 100644 --- a/drivers/net/wireless/iwlegacy/4965-rs.c +++ b/drivers/net/wireless/iwlegacy/4965-rs.c @@ -1183,8 +1183,7 @@ il4965_rs_switch_to_mimo2(struct il_priv *il, struct il_lq_sta *lq_sta, if (!conf_is_ht(conf) || !sta->ht_cap.ht_supported) return -1; - if (((sta->ht_cap.cap & IEEE80211_HT_CAP_SM_PS) >> 2) == - WLAN_HT_CAP_SM_PS_STATIC) + if (sta->smps_mode == IEEE80211_SMPS_STATIC) return -1; /* Need both Tx chains/antennas to support MIMO */ diff --git a/drivers/net/wireless/iwlegacy/common.c b/drivers/net/wireless/iwlegacy/common.c index 1f598604a79c..4c9aafb1b0cd 100644 --- a/drivers/net/wireless/iwlegacy/common.c +++ b/drivers/net/wireless/iwlegacy/common.c @@ -1830,32 +1830,30 @@ il_set_ht_add_station(struct il_priv *il, u8 idx, struct ieee80211_sta *sta) { struct ieee80211_sta_ht_cap *sta_ht_inf = &sta->ht_cap; __le32 sta_flags; - u8 mimo_ps_mode; if (!sta || !sta_ht_inf->ht_supported) goto done; - mimo_ps_mode = (sta_ht_inf->cap & IEEE80211_HT_CAP_SM_PS) >> 2; D_ASSOC("spatial multiplexing power save mode: %s\n", - (mimo_ps_mode == WLAN_HT_CAP_SM_PS_STATIC) ? "static" : - (mimo_ps_mode == WLAN_HT_CAP_SM_PS_DYNAMIC) ? "dynamic" : + (sta->smps_mode == IEEE80211_SMPS_STATIC) ? "static" : + (sta->smps_mode == IEEE80211_SMPS_DYNAMIC) ? "dynamic" : "disabled"); sta_flags = il->stations[idx].sta.station_flags; sta_flags &= ~(STA_FLG_RTS_MIMO_PROT_MSK | STA_FLG_MIMO_DIS_MSK); - switch (mimo_ps_mode) { - case WLAN_HT_CAP_SM_PS_STATIC: + switch (sta->smps_mode) { + case IEEE80211_SMPS_STATIC: sta_flags |= STA_FLG_MIMO_DIS_MSK; break; - case WLAN_HT_CAP_SM_PS_DYNAMIC: + case IEEE80211_SMPS_DYNAMIC: sta_flags |= STA_FLG_RTS_MIMO_PROT_MSK; break; - case WLAN_HT_CAP_SM_PS_DISABLED: + case IEEE80211_SMPS_OFF: break; default: - IL_WARN("Invalid MIMO PS mode %d\n", mimo_ps_mode); + IL_WARN("Invalid MIMO PS mode %d\n", sta->smps_mode); break; } diff --git a/drivers/net/wireless/iwlwifi/dvm/rs.c b/drivers/net/wireless/iwlwifi/dvm/rs.c index b25de02964f9..abe304267261 100644 --- a/drivers/net/wireless/iwlwifi/dvm/rs.c +++ b/drivers/net/wireless/iwlwifi/dvm/rs.c @@ -1289,8 +1289,7 @@ static int rs_switch_to_mimo2(struct iwl_priv *priv, if (!conf_is_ht(conf) || !sta->ht_cap.ht_supported) return -1; - if (((sta->ht_cap.cap & IEEE80211_HT_CAP_SM_PS) >> 2) - == WLAN_HT_CAP_SM_PS_STATIC) + if (sta->smps_mode == IEEE80211_SMPS_STATIC) return -1; /* Need both Tx chains/antennas to support MIMO */ @@ -1345,8 +1344,7 @@ static int rs_switch_to_mimo3(struct iwl_priv *priv, if (!conf_is_ht(conf) || !sta->ht_cap.ht_supported) return -1; - if (((sta->ht_cap.cap & IEEE80211_HT_CAP_SM_PS) >> 2) - == WLAN_HT_CAP_SM_PS_STATIC) + if (sta->smps_mode == IEEE80211_SMPS_STATIC) return -1; /* Need both Tx chains/antennas to support MIMO */ diff --git a/drivers/net/wireless/iwlwifi/dvm/sta.c b/drivers/net/wireless/iwlwifi/dvm/sta.c index 6deab38c7aee..d5faf74c7991 100644 --- a/drivers/net/wireless/iwlwifi/dvm/sta.c +++ b/drivers/net/wireless/iwlwifi/dvm/sta.c @@ -196,7 +196,6 @@ static void iwl_sta_calc_ht_flags(struct iwl_priv *priv, __le32 *flags, __le32 *mask) { struct ieee80211_sta_ht_cap *sta_ht_inf = &sta->ht_cap; - u8 mimo_ps_mode; *mask = STA_FLG_RTS_MIMO_PROT_MSK | STA_FLG_MIMO_DIS_MSK | @@ -208,26 +207,24 @@ static void iwl_sta_calc_ht_flags(struct iwl_priv *priv, if (!sta || !sta_ht_inf->ht_supported) return; - mimo_ps_mode = (sta_ht_inf->cap & IEEE80211_HT_CAP_SM_PS) >> 2; - IWL_DEBUG_INFO(priv, "STA %pM SM PS mode: %s\n", sta->addr, - (mimo_ps_mode == WLAN_HT_CAP_SM_PS_STATIC) ? + (sta->smps_mode == IEEE80211_SMPS_STATIC) ? "static" : - (mimo_ps_mode == WLAN_HT_CAP_SM_PS_DYNAMIC) ? + (sta->smps_mode == IEEE80211_SMPS_DYNAMIC) ? "dynamic" : "disabled"); - switch (mimo_ps_mode) { - case WLAN_HT_CAP_SM_PS_STATIC: + switch (sta->smps_mode) { + case IEEE80211_SMPS_STATIC: *flags |= STA_FLG_MIMO_DIS_MSK; break; - case WLAN_HT_CAP_SM_PS_DYNAMIC: + case IEEE80211_SMPS_DYNAMIC: *flags |= STA_FLG_RTS_MIMO_PROT_MSK; break; - case WLAN_HT_CAP_SM_PS_DISABLED: + case IEEE80211_SMPS_OFF: break; default: - IWL_WARN(priv, "Invalid MIMO PS mode %d\n", mimo_ps_mode); + IWL_WARN(priv, "Invalid MIMO PS mode %d\n", sta->smps_mode); break; } diff --git a/drivers/net/wireless/iwlwifi/mvm/rs.c b/drivers/net/wireless/iwlwifi/mvm/rs.c index 8ba36e5e4b67..56b636d9ab30 100644 --- a/drivers/net/wireless/iwlwifi/mvm/rs.c +++ b/drivers/net/wireless/iwlwifi/mvm/rs.c @@ -1229,8 +1229,7 @@ static int rs_switch_to_mimo2(struct iwl_mvm *mvm, if (!sta->ht_cap.ht_supported) return -1; - if (((sta->ht_cap.cap & IEEE80211_HT_CAP_SM_PS) >> 2) - == WLAN_HT_CAP_SM_PS_STATIC) + if (sta->smps_mode == IEEE80211_SMPS_STATIC) return -1; /* Need both Tx chains/antennas to support MIMO */ @@ -1282,8 +1281,7 @@ static int rs_switch_to_mimo3(struct iwl_mvm *mvm, if (!sta->ht_cap.ht_supported) return -1; - if (((sta->ht_cap.cap & IEEE80211_HT_CAP_SM_PS) >> 2) - == WLAN_HT_CAP_SM_PS_STATIC) + if (sta->smps_mode == IEEE80211_SMPS_STATIC) return -1; /* Need both Tx chains/antennas to support MIMO */ diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c index f35d85a71bbc..9503e6954b89 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c @@ -343,10 +343,7 @@ static void rt2x00queue_create_tx_descriptor_ht(struct rt2x00_dev *rt2x00dev, * when using more then one tx stream (>MCS7). */ if (sta && txdesc->u.ht.mcs > 7 && - ((sta->ht_cap.cap & - IEEE80211_HT_CAP_SM_PS) >> - IEEE80211_HT_CAP_SM_PS_SHIFT) == - WLAN_HT_CAP_SM_PS_DYNAMIC) + sta->smps_mode == IEEE80211_SMPS_DYNAMIC) __set_bit(ENTRY_TXD_HT_MIMO_PS, &txdesc->flags); } else { txdesc->u.ht.mcs = rt2x00_get_rate_mcs(hwrate->mcs); diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 54e2add8429f..f7eba1300d82 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1245,6 +1245,7 @@ enum ieee80211_sta_rx_bandwidth { * station can receive at the moment, changed by operating mode * notifications and capabilities. The value is only valid after * the station moves to associated state. + * @smps_mode: current SMPS mode (off, static or dynamic) */ struct ieee80211_sta { u32 supp_rates[IEEE80211_NUM_BANDS]; @@ -1257,6 +1258,7 @@ struct ieee80211_sta { u8 max_sp; u8 rx_nss; enum ieee80211_sta_rx_bandwidth bandwidth; + enum ieee80211_smps_mode smps_mode; /* must be last */ u8 drv_priv[0] __aligned(sizeof(void *)); diff --git a/net/mac80211/ht.c b/net/mac80211/ht.c index b84147ac5b4c..0db25d4bb223 100644 --- a/net/mac80211/ht.c +++ b/net/mac80211/ht.c @@ -102,6 +102,7 @@ bool ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_sub_if_data *sdata, int i, max_tx_streams; bool changed; enum ieee80211_sta_rx_bandwidth bw; + enum ieee80211_smps_mode smps_mode; memset(&ht_cap, 0, sizeof(ht_cap)); @@ -216,6 +217,24 @@ bool ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_sub_if_data *sdata, ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 ? IEEE80211_STA_RX_BW_40 : IEEE80211_STA_RX_BW_20; + switch ((ht_cap.cap & IEEE80211_HT_CAP_SM_PS) + >> IEEE80211_HT_CAP_SM_PS_SHIFT) { + case WLAN_HT_CAP_SM_PS_INVALID: + case WLAN_HT_CAP_SM_PS_STATIC: + smps_mode = IEEE80211_SMPS_STATIC; + break; + case WLAN_HT_CAP_SM_PS_DYNAMIC: + smps_mode = IEEE80211_SMPS_DYNAMIC; + break; + case WLAN_HT_CAP_SM_PS_DISABLED: + smps_mode = IEEE80211_SMPS_OFF; + break; + } + + if (smps_mode != sta->sta.smps_mode) + changed = true; + sta->sta.smps_mode = smps_mode; + return changed; } diff --git a/net/mac80211/rc80211_minstrel_ht.c b/net/mac80211/rc80211_minstrel_ht.c index 6176c71d47ff..3af141c69712 100644 --- a/net/mac80211/rc80211_minstrel_ht.c +++ b/net/mac80211/rc80211_minstrel_ht.c @@ -808,7 +808,6 @@ minstrel_ht_update_caps(void *priv, struct ieee80211_supported_band *sband, int ack_dur; int stbc; int i; - unsigned int smps; /* fall back to the old minstrel for legacy stations */ if (!sta->ht_cap.ht_supported) @@ -844,9 +843,6 @@ minstrel_ht_update_caps(void *priv, struct ieee80211_supported_band *sband, if (sta_cap & IEEE80211_HT_CAP_LDPC_CODING) mi->tx_flags |= IEEE80211_TX_CTL_LDPC; - smps = (sta_cap & IEEE80211_HT_CAP_SM_PS) >> - IEEE80211_HT_CAP_SM_PS_SHIFT; - for (i = 0; i < ARRAY_SIZE(mi->groups); i++) { mi->groups[i].supported = 0; if (i == MINSTREL_CCK_GROUP) { @@ -869,7 +865,7 @@ minstrel_ht_update_caps(void *priv, struct ieee80211_supported_band *sband, continue; /* Mark MCS > 7 as unsupported if STA is in static SMPS mode */ - if (smps == WLAN_HT_CAP_SM_PS_STATIC && + if (sta->smps_mode == IEEE80211_SMPS_STATIC && minstrel_mcs_groups[i].streams > 1) continue; diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 296a4aeadedc..3acb70b73e22 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -2375,31 +2375,27 @@ ieee80211_rx_h_action(struct ieee80211_rx_data *rx) switch (mgmt->u.action.u.ht_smps.action) { case WLAN_HT_ACTION_SMPS: { struct ieee80211_supported_band *sband; - u8 smps; + enum ieee80211_smps_mode smps_mode; /* convert to HT capability */ switch (mgmt->u.action.u.ht_smps.smps_control) { case WLAN_HT_SMPS_CONTROL_DISABLED: - smps = WLAN_HT_CAP_SM_PS_DISABLED; + smps_mode = IEEE80211_SMPS_OFF; break; case WLAN_HT_SMPS_CONTROL_STATIC: - smps = WLAN_HT_CAP_SM_PS_STATIC; + smps_mode = IEEE80211_SMPS_STATIC; break; case WLAN_HT_SMPS_CONTROL_DYNAMIC: - smps = WLAN_HT_CAP_SM_PS_DYNAMIC; + smps_mode = IEEE80211_SMPS_DYNAMIC; break; default: goto invalid; } - smps <<= IEEE80211_HT_CAP_SM_PS_SHIFT; /* if no change do nothing */ - if ((rx->sta->sta.ht_cap.cap & - IEEE80211_HT_CAP_SM_PS) == smps) + if (rx->sta->sta.smps_mode == smps_mode) goto handled; - - rx->sta->sta.ht_cap.cap &= ~IEEE80211_HT_CAP_SM_PS; - rx->sta->sta.ht_cap.cap |= smps; + rx->sta->sta.smps_mode = smps_mode; sband = rx->local->hw.wiphy->bands[status->band]; diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c index 0794b9018ed4..a79ce820cb50 100644 --- a/net/mac80211/sta_info.c +++ b/net/mac80211/sta_info.c @@ -375,6 +375,8 @@ struct sta_info *sta_info_alloc(struct ieee80211_sub_if_data *sdata, for (i = 0; i < IEEE80211_NUM_TIDS; i++) sta->last_seq_ctrl[i] = cpu_to_le16(USHRT_MAX); + sta->sta.smps_mode = IEEE80211_SMPS_OFF; + sta_dbg(sdata, "Allocated STA %pM\n", sta->sta.addr); return sta; From a50df0c4c0d97170a6c43573612acacc43e62fe7 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 11 Feb 2013 14:20:05 +0100 Subject: [PATCH 203/209] cfg80211: advertise extended capabilities to userspace In many cases, userspace may need to know which of the 802.11 extended capabilities ("Extended Capabilities element") are implemented in the driver or device, to include them e.g. in beacons, assoc request/response or other frames. Add a new nl80211 attribute to hold the extended capabilities bitmap for this. Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 11 +++++++++++ include/uapi/linux/nl80211.h | 9 +++++++++ net/wireless/nl80211.c | 9 +++++++++ 3 files changed, 29 insertions(+) diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 8a9200f2f4a4..a229046d86d4 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -2480,6 +2480,14 @@ struct wiphy_wowlan_support { * * @max_acl_mac_addrs: Maximum number of MAC addresses that the device * supports for ACL. + * + * @extended_capabilities: extended capabilities supported by the driver, + * additional capabilities might be supported by userspace; these are + * the 802.11 extended capabilities ("Extended Capabilities element") + * and are in the same format as in the information element. See + * 802.11-2012 8.4.2.29 for the defined fields. + * @extended_capabilities_mask: mask of the valid values + * @extended_capabilities_len: length of the extended capabilities */ struct wiphy { /* assign these fields before you register the wiphy */ @@ -2546,6 +2554,9 @@ struct wiphy { */ u32 probe_resp_offload; + const u8 *extended_capabilities, *extended_capabilities_mask; + u8 extended_capabilities_len; + /* If multiple wiphys are registered and you're handed e.g. * a regular netdev with assigned ieee80211_ptr, you won't * know whether it points to a wiphy your driver has registered diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 3880f6ad7ed1..1fd6e5611896 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -1355,6 +1355,12 @@ enum nl80211_commands { * @NL80211_ATTR_RADAR_EVENT: Type of radar event for notification to userspace, * contains a value of enum nl80211_radar_event (u32). * + * @NL80211_ATTR_EXT_CAPA: 802.11 extended capabilities that the kernel driver + * has and handles. The format is the same as the IE contents. See + * 802.11-2012 8.4.2.29 for more information. + * @NL80211_ATTR_EXT_CAPA_MASK: Extended capabilities that the kernel driver + * has set in the %NL80211_ATTR_EXT_CAPA value, for multibit fields. + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -1635,6 +1641,9 @@ enum nl80211_attrs { NL80211_ATTR_RADAR_EVENT, + NL80211_ATTR_EXT_CAPA, + NL80211_ATTR_EXT_CAPA_MASK, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 7e40b9e82b45..1237431c3efa 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -1363,6 +1363,15 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 portid, u32 seq, int flag dev->wiphy.max_acl_mac_addrs)) goto nla_put_failure; + if (dev->wiphy.extended_capabilities && + (nla_put(msg, NL80211_ATTR_EXT_CAPA, + dev->wiphy.extended_capabilities_len, + dev->wiphy.extended_capabilities) || + nla_put(msg, NL80211_ATTR_EXT_CAPA_MASK, + dev->wiphy.extended_capabilities_len, + dev->wiphy.extended_capabilities_mask))) + goto nla_put_failure; + return genlmsg_end(msg, hdr); nla_put_failure: From c6f9d6c3bdeb337809d667ef2a41597229a1ce57 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 11 Feb 2013 14:27:08 +0100 Subject: [PATCH 204/209] mac80211: advertise operating mode notification capability Use the new extended capabilities advertising to advertise the fact that operating mode notification is supported. Signed-off-by: Johannes Berg --- include/linux/ieee80211.h | 2 ++ net/mac80211/main.c | 9 +++++++++ 2 files changed, 11 insertions(+) diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index e085fcf52b26..7e24fe0cfbcd 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -1776,6 +1776,8 @@ enum ieee80211_tdls_actioncode { #define WLAN_EXT_CAPA5_TDLS_ENABLED BIT(5) #define WLAN_EXT_CAPA5_TDLS_PROHIBITED BIT(6) +#define WLAN_EXT_CAPA8_OPMODE_NOTIF BIT(6) + /* TDLS specific payload type in the LLC/SNAP header */ #define WLAN_TDLS_SNAP_RFTYPE 0x2 diff --git a/net/mac80211/main.c b/net/mac80211/main.c index 9cdbc774cfd7..035344bc6b9c 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -501,6 +501,11 @@ static const struct ieee80211_ht_cap mac80211_ht_capa_mod_mask = { }, }; +static const u8 extended_capabilities[] = { + 0, 0, 0, 0, 0, 0, 0, + WLAN_EXT_CAPA8_OPMODE_NOTIF, +}; + struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len, const struct ieee80211_ops *ops) { @@ -557,6 +562,10 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len, WIPHY_FLAG_REPORTS_OBSS | WIPHY_FLAG_OFFCHAN_TX; + wiphy->extended_capabilities = extended_capabilities; + wiphy->extended_capabilities_mask = extended_capabilities; + wiphy->extended_capabilities_len = ARRAY_SIZE(extended_capabilities); + if (ops->remain_on_channel) wiphy->flags |= WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL; From 9d62a98617298c1da288f50e84c5dd67732e79b7 Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Thu, 14 Feb 2013 21:10:13 +0200 Subject: [PATCH 205/209] cfg80211: Pass station (extended) capability info to kernel The information of the peer's capabilities and extended capabilities are required for the driver to perform TDLS Peer UAPSD operations and off channel operations. This information of the peer is passed from user space using NL80211_CMD_SET_STATION command. This commit enhances the function nl80211_set_station to pass the capability information of the peer to the driver. Similarly, there may be need for capability information for other modes, so allow this to be provided with both add_station and change_station. Signed-off-by: Jouni Malinen Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 8 ++++++++ include/uapi/linux/nl80211.h | 10 ++++++++++ net/wireless/nl80211.c | 36 ++++++++++++++++++++++++++++++++++++ 3 files changed, 54 insertions(+) diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index a229046d86d4..fa2612952c19 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -626,12 +626,14 @@ enum plink_actions { /** * enum station_parameters_apply_mask - station parameter values to apply * @STATION_PARAM_APPLY_UAPSD: apply new uAPSD parameters (uapsd_queues, max_sp) + * @STATION_PARAM_APPLY_CAPABILITY: apply new capability * * Not all station parameters have in-band "no change" signalling, * for those that don't these flags will are used. */ enum station_parameters_apply_mask { STATION_PARAM_APPLY_UAPSD = BIT(0), + STATION_PARAM_APPLY_CAPABILITY = BIT(1), }; /** @@ -662,6 +664,9 @@ enum station_parameters_apply_mask { * see &enum station_parameters_apply_mask * @local_pm: local link-specific mesh power save mode (no change when set * to unknown) + * @capability: station capability + * @ext_capab: extended capabilities of the station + * @ext_capab_len: number of extended capabilities */ struct station_parameters { u8 *supported_rates; @@ -678,6 +683,9 @@ struct station_parameters { u8 uapsd_queues; u8 max_sp; enum nl80211_mesh_power_mode local_pm; + u16 capability; + u8 *ext_capab; + u8 ext_capab_len; }; /** diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 1fd6e5611896..f7c35ca01efc 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -1361,6 +1361,13 @@ enum nl80211_commands { * @NL80211_ATTR_EXT_CAPA_MASK: Extended capabilities that the kernel driver * has set in the %NL80211_ATTR_EXT_CAPA value, for multibit fields. * + * @NL80211_ATTR_STA_CAPABILITY: Station capabilities (u16) are advertised to + * the driver, e.g., to enable TDLS power save (PU-APSD). + * + * @NL80211_ATTR_STA_EXT_CAPABILITY: Station extended capabilities are + * advertised to the driver, e.g., to enable TDLS off channel operations + * and PU-APSD. + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -1644,6 +1651,9 @@ enum nl80211_attrs { NL80211_ATTR_EXT_CAPA, NL80211_ATTR_EXT_CAPA_MASK, + NL80211_ATTR_STA_CAPABILITY, + NL80211_ATTR_STA_EXT_CAPABILITY, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 1237431c3efa..be9f2b5a403f 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -368,6 +368,8 @@ static const struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] = { [NL80211_ATTR_P2P_OPPPS] = { .type = NLA_U8 }, [NL80211_ATTR_ACL_POLICY] = {. type = NLA_U32 }, [NL80211_ATTR_MAC_ADDRS] = { .type = NLA_NESTED }, + [NL80211_ATTR_STA_CAPABILITY] = { .type = NLA_U16 }, + [NL80211_ATTR_STA_EXT_CAPABILITY] = { .type = NLA_BINARY, }, }; /* policy for the key attributes */ @@ -3435,6 +3437,19 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info) nla_len(info->attrs[NL80211_ATTR_STA_SUPPORTED_RATES]); } + if (info->attrs[NL80211_ATTR_STA_CAPABILITY]) { + params.capability = + nla_get_u16(info->attrs[NL80211_ATTR_STA_CAPABILITY]); + params.sta_modify_mask |= STATION_PARAM_APPLY_CAPABILITY; + } + + if (info->attrs[NL80211_ATTR_STA_EXT_CAPABILITY]) { + params.ext_capab = + nla_data(info->attrs[NL80211_ATTR_STA_EXT_CAPABILITY]); + params.ext_capab_len = + nla_len(info->attrs[NL80211_ATTR_STA_EXT_CAPABILITY]); + } + if (info->attrs[NL80211_ATTR_STA_LISTEN_INTERVAL] || info->attrs[NL80211_ATTR_HT_CAPABILITY]) return -EINVAL; @@ -3505,6 +3520,10 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info) /* reject other things that can't change */ if (params.supported_rates) return -EINVAL; + if (info->attrs[NL80211_ATTR_STA_CAPABILITY]) + return -EINVAL; + if (info->attrs[NL80211_ATTR_STA_EXT_CAPABILITY]) + return -EINVAL; /* must be last in here for error handling */ params.vlan = get_vlan(info, rdev); @@ -3537,6 +3556,10 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info) return -EINVAL; if (params.supported_rates) return -EINVAL; + if (info->attrs[NL80211_ATTR_STA_CAPABILITY]) + return -EINVAL; + if (info->attrs[NL80211_ATTR_STA_EXT_CAPABILITY]) + return -EINVAL; /* * No special handling for TDLS here -- the userspace * mesh code doesn't have this bug. @@ -3601,6 +3624,19 @@ static int nl80211_new_station(struct sk_buff *skb, struct genl_info *info) if (!params.aid || params.aid > IEEE80211_MAX_AID) return -EINVAL; + if (info->attrs[NL80211_ATTR_STA_CAPABILITY]) { + params.capability = + nla_get_u16(info->attrs[NL80211_ATTR_STA_CAPABILITY]); + params.sta_modify_mask |= STATION_PARAM_APPLY_CAPABILITY; + } + + if (info->attrs[NL80211_ATTR_STA_EXT_CAPABILITY]) { + params.ext_capab = + nla_data(info->attrs[NL80211_ATTR_STA_EXT_CAPABILITY]); + params.ext_capab_len = + nla_len(info->attrs[NL80211_ATTR_STA_EXT_CAPABILITY]); + } + if (info->attrs[NL80211_ATTR_HT_CAPABILITY]) params.ht_capa = nla_data(info->attrs[NL80211_ATTR_HT_CAPABILITY]); From df881293c6ba9a12868491a717b25cb14ec1fa4a Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Thu, 14 Feb 2013 21:10:54 +0200 Subject: [PATCH 206/209] cfg80211: Pass TDLS peer's QoS/HT/VHT information during set_station The information of the peer's capabilities is required for the driver to perform TDLS Peer UAPSD operations. This information of the peer is passed by the supplicant using NL80211_CMD_SET_STATION command. This commit enhances the function nl80211_set_station to pass this information of the peer to the driver in case this command is used with the TDLS peer STA. In addition, make the HT/VHT capability configuration handled more consistently for other STA cases (reject both instead of just HT). Signed-off-by: Jouni Malinen Signed-off-by: Johannes Berg --- net/mac80211/cfg.c | 6 ++- net/wireless/nl80211.c | 90 +++++++++++++++++++++++++++++++++++++----- 2 files changed, 85 insertions(+), 11 deletions(-) diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 0800fb331ce5..179dcbd8be1c 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1412,9 +1412,11 @@ static int ieee80211_change_station(struct wiphy *wiphy, return -ENOENT; } - /* in station mode, supported rates are only valid with TDLS */ + /* in station mode, some updates are only valid with TDLS */ if (sdata->vif.type == NL80211_IFTYPE_STATION && - params->supported_rates && + (params->supported_rates || params->ht_capa || params->vht_capa || + params->sta_modify_mask || + (params->sta_flags_mask & BIT(NL80211_STA_FLAG_WME))) && !test_sta_flag(sta, WLAN_STA_TDLS_PEER)) { mutex_unlock(&local->sta_mtx); return -EINVAL; diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index be9f2b5a403f..580ffeaef3d5 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -3409,6 +3409,63 @@ static struct net_device *get_vlan(struct genl_info *info, return ERR_PTR(ret); } +static struct nla_policy +nl80211_sta_wme_policy[NL80211_STA_WME_MAX + 1] __read_mostly = { + [NL80211_STA_WME_UAPSD_QUEUES] = { .type = NLA_U8 }, + [NL80211_STA_WME_MAX_SP] = { .type = NLA_U8 }, +}; + +static int nl80211_set_station_tdls(struct genl_info *info, + struct station_parameters *params) +{ + struct cfg80211_registered_device *rdev = info->user_ptr[0]; + struct nlattr *tb[NL80211_STA_WME_MAX + 1]; + struct nlattr *nla; + int err; + + /* Can only set if TDLS ... */ + if (!(rdev->wiphy.flags & WIPHY_FLAG_SUPPORTS_TDLS)) + return -EOPNOTSUPP; + + /* ... with external setup is supported */ + if (!(rdev->wiphy.flags & WIPHY_FLAG_TDLS_EXTERNAL_SETUP)) + return -EOPNOTSUPP; + + /* Dummy STA entry gets updated once the peer capabilities are known */ + if (info->attrs[NL80211_ATTR_HT_CAPABILITY]) + params->ht_capa = + nla_data(info->attrs[NL80211_ATTR_HT_CAPABILITY]); + if (info->attrs[NL80211_ATTR_VHT_CAPABILITY]) + params->vht_capa = + nla_data(info->attrs[NL80211_ATTR_VHT_CAPABILITY]); + + /* parse WME attributes if present */ + if (!info->attrs[NL80211_ATTR_STA_WME]) + return 0; + + nla = info->attrs[NL80211_ATTR_STA_WME]; + err = nla_parse_nested(tb, NL80211_STA_WME_MAX, nla, + nl80211_sta_wme_policy); + if (err) + return err; + + if (tb[NL80211_STA_WME_UAPSD_QUEUES]) + params->uapsd_queues = nla_get_u8( + tb[NL80211_STA_WME_UAPSD_QUEUES]); + if (params->uapsd_queues & ~IEEE80211_WMM_IE_STA_QOSINFO_AC_MASK) + return -EINVAL; + + if (tb[NL80211_STA_WME_MAX_SP]) + params->max_sp = nla_get_u8(tb[NL80211_STA_WME_MAX_SP]); + + if (params->max_sp & ~IEEE80211_WMM_IE_STA_QOSINFO_SP_MASK) + return -EINVAL; + + params->sta_modify_mask |= STATION_PARAM_APPLY_UAPSD; + + return 0; +} + static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info) { struct cfg80211_registered_device *rdev = info->user_ptr[0]; @@ -3450,8 +3507,7 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info) nla_len(info->attrs[NL80211_ATTR_STA_EXT_CAPABILITY]); } - if (info->attrs[NL80211_ATTR_STA_LISTEN_INTERVAL] || - info->attrs[NL80211_ATTR_HT_CAPABILITY]) + if (info->attrs[NL80211_ATTR_STA_LISTEN_INTERVAL]) return -EINVAL; if (!rdev->ops->change_station) @@ -3524,6 +3580,9 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info) return -EINVAL; if (info->attrs[NL80211_ATTR_STA_EXT_CAPABILITY]) return -EINVAL; + if (info->attrs[NL80211_ATTR_HT_CAPABILITY] || + info->attrs[NL80211_ATTR_VHT_CAPABILITY]) + return -EINVAL; /* must be last in here for error handling */ params.vlan = get_vlan(info, rdev); @@ -3539,13 +3598,29 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info) * to change the flag. */ params.sta_flags_mask &= ~BIT(NL80211_STA_FLAG_TDLS_PEER); - /* fall through */ + /* Include parameters for TDLS peer (driver will check) */ + err = nl80211_set_station_tdls(info, ¶ms); + if (err) + return err; + /* disallow things sta doesn't support */ + if (params.plink_action) + return -EINVAL; + if (params.local_pm) + return -EINVAL; + /* reject any changes other than AUTHORIZED or WME (for TDLS) */ + if (params.sta_flags_mask & ~(BIT(NL80211_STA_FLAG_AUTHORIZED) | + BIT(NL80211_STA_FLAG_WME))) + return -EINVAL; + break; case NL80211_IFTYPE_ADHOC: /* disallow things sta doesn't support */ if (params.plink_action) return -EINVAL; if (params.local_pm) return -EINVAL; + if (info->attrs[NL80211_ATTR_HT_CAPABILITY] || + info->attrs[NL80211_ATTR_VHT_CAPABILITY]) + return -EINVAL; /* reject any changes other than AUTHORIZED */ if (params.sta_flags_mask & ~BIT(NL80211_STA_FLAG_AUTHORIZED)) return -EINVAL; @@ -3560,6 +3635,9 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info) return -EINVAL; if (info->attrs[NL80211_ATTR_STA_EXT_CAPABILITY]) return -EINVAL; + if (info->attrs[NL80211_ATTR_HT_CAPABILITY] || + info->attrs[NL80211_ATTR_VHT_CAPABILITY]) + return -EINVAL; /* * No special handling for TDLS here -- the userspace * mesh code doesn't have this bug. @@ -3584,12 +3662,6 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info) return err; } -static struct nla_policy -nl80211_sta_wme_policy[NL80211_STA_WME_MAX + 1] __read_mostly = { - [NL80211_STA_WME_UAPSD_QUEUES] = { .type = NLA_U8 }, - [NL80211_STA_WME_MAX_SP] = { .type = NLA_U8 }, -}; - static int nl80211_new_station(struct sk_buff *skb, struct genl_info *info) { struct cfg80211_registered_device *rdev = info->user_ptr[0]; From 932dd97c5fef091dd6f605fb1d40143d67d91e09 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 14 Feb 2013 11:56:13 +0100 Subject: [PATCH 207/209] nl80211: renumber NL80211_FEATURE_FULL_AP_CLIENT_STATE Adding the flag to mac80211 already without testing was clearly a mistake, one that we now pay for by having to reserve bit 13 forever. The problem is cfg80211 doesn't allow capability/rate changes for station entries that were added unassociated, so the station entries cannot be set up properly when marked associated. Change the NL80211_FEATURE_FULL_AP_CLIENT_STATE value to make it clear to userspace implementations that all current kernels don't actually support it, even though the previous bit is set, and of course also remove the flag from mac80211 until we test and fix the issues. Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 3 ++- net/mac80211/main.c | 3 +-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index f7c35ca01efc..c46bb016f4e4 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -3471,8 +3471,9 @@ enum nl80211_feature_flags { NL80211_FEATURE_NEED_OBSS_SCAN = 1 << 10, NL80211_FEATURE_P2P_GO_CTWIN = 1 << 11, NL80211_FEATURE_P2P_GO_OPPPS = 1 << 12, - NL80211_FEATURE_FULL_AP_CLIENT_STATE = 1 << 13, + /* bit 13 is reserved */ NL80211_FEATURE_ADVERTISE_CHAN_LIMITS = 1 << 14, + NL80211_FEATURE_FULL_AP_CLIENT_STATE = 1 << 15, }; /** diff --git a/net/mac80211/main.c b/net/mac80211/main.c index 035344bc6b9c..f9747689d604 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -572,8 +572,7 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len, wiphy->features |= NL80211_FEATURE_SK_TX_STATUS | NL80211_FEATURE_SAE | NL80211_FEATURE_HT_IBSS | - NL80211_FEATURE_VIF_TXPOWER | - NL80211_FEATURE_FULL_AP_CLIENT_STATE; + NL80211_FEATURE_VIF_TXPOWER; if (!ops->hw_scan) wiphy->features |= NL80211_FEATURE_LOW_PRIORITY_SCAN | From 586e01ededf9b713a1512dd658806791a7ca1a50 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 14 Feb 2013 12:13:53 +0100 Subject: [PATCH 208/209] mac80211: prevent spurious HT/VHT downgrade message Even when connecting to an AP that doesn't support VHT, and even when the local device doesn't support it either, the downgrade message gets printed. Suppress the message if HT and/or VHT is disabled. Signed-off-by: Johannes Berg --- net/mac80211/mlme.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 7a8cd789e487..9f6464f3e05f 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -357,6 +357,10 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata, ret = 0; out: + /* don't print the message below for VHT mismatch if VHT is disabled */ + if (ret & IEEE80211_STA_DISABLE_VHT) + vht_chandef = *chandef; + while (!cfg80211_chandef_usable(sdata->local->hw.wiphy, chandef, IEEE80211_CHAN_DISABLED)) { if (WARN_ON(chandef->width == NL80211_CHAN_WIDTH_20_NOHT)) { From 93c78c5debeb9c7101ecc73347d4730c26a98c05 Mon Sep 17 00:00:00 2001 From: Karl Beldan Date: Fri, 15 Feb 2013 00:03:14 +0100 Subject: [PATCH 209/209] mac80211_hwsim: ask mac80211 to reserve space for chanctx.drv_priv Otherwise memory corruption occurs when using channel contexts (ATM when param 'channel' > 1). Signed-off-by: Karl Beldan Signed-off-by: Johannes Berg --- drivers/net/wireless/mac80211_hwsim.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index b73e497fe770..cffdf4fbf161 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -2247,6 +2247,7 @@ static int __init init_mac80211_hwsim(void) /* ask mac80211 to reserve space for magic */ hw->vif_data_size = sizeof(struct hwsim_vif_priv); hw->sta_data_size = sizeof(struct hwsim_sta_priv); + hw->chanctx_data_size = sizeof(struct hwsim_chanctx_priv); memcpy(data->channels_2ghz, hwsim_channels_2ghz, sizeof(hwsim_channels_2ghz));