leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity

mmc: sdhci-omap: Workaround errata regarding SDR104/HS200 tuning failures (i929)

Browse Source 
Errata i929 in certain OMAP5/DRA7XX/AM57XX silicon revisions
(SPRZ426D - November 2014 - Revised February 2018 [1]) mentions
unexpected tuning pattern errors. A small failure band may be present
in the tuning range which may be missed by the current algorithm.
Furthermore, the failure bands vary with temperature leading to
different optimum tuning values for different temperatures.

As suggested in the related Application Report (SPRACA9B - October 2017
- Revised July 2018 [2]), tuning should be done in two stages.
In stage 1, assign the optimum ratio in the maximum pass window for the
current temperature. In stage 2, if the chosen value is close to the
small failure band, move away from it in the appropriate direction.

References:
[1] http://www.ti.com/lit/pdf/sprz426
[2] http://www.ti.com/lit/pdf/SPRACA9

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This commit is contained in:
Faiz Abbas 2018-12-11 19:52:53 +05:30 committed by Ulf Hansson
parent 58fe8bbacd
commit 961de0a856
2 changed files with 91 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
drivers/mmc/host/Kconfig
View File

@ -977,6 +977,8 @@ config MMC_SDHCI_XENON
config MMC_SDHCI_OMAP
tristate "TI SDHCI Controller Support"
depends on MMC_SDHCI_PLTFM && OF
select THERMAL
select TI_SOC_THERMAL
help
This selects the Secure Digital Host Controller Interface (SDHCI)
support present in TI's DRA7 SOCs. The controller supports

90
drivers/mmc/host/sdhci-omap.c
View File

@ -27,6 +27,7 @@
#include <linux/regulator/consumer.h>
#include <linux/pinctrl/consumer.h>
#include <linux/sys_soc.h>
#include <linux/thermal.h>
#include "sdhci-pltfm.h"
@ -290,15 +291,19 @@ static int sdhci_omap_execute_tuning(struct mmc_host *mmc, u32 opcode)
struct sdhci_host *host = mmc_priv(mmc);
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_omap_host *omap_host = sdhci_pltfm_priv(pltfm_host);
struct thermal_zone_device *thermal_dev;
struct device *dev = omap_host->dev;
struct mmc_ios *ios = &mmc->ios;
u32 start_window = 0, max_window = 0;
bool single_point_failure = false;
bool dcrc_was_enabled = false;
u8 cur_match, prev_match = 0;
u32 length = 0, max_len = 0;
u32 phase_delay = 0;
int temperature;
int ret = 0;
u32 reg;
int i;
/* clock tuning is not needed for upto 52MHz */
if (ios->clock <= 52000000)
@ -308,6 +313,16 @@ static int sdhci_omap_execute_tuning(struct mmc_host *mmc, u32 opcode)
if (ios->timing == MMC_TIMING_UHS_SDR50 && !(reg & CAPA2_TSDR50))
return 0;
thermal_dev = thermal_zone_get_zone_by_name("cpu_thermal");
if (IS_ERR(thermal_dev)) {
dev_err(dev, "Unable to get thermal zone for tuning\n");
return PTR_ERR(thermal_dev);
}
ret = thermal_zone_get_temp(thermal_dev, &temperature);
if (ret)
return ret;
reg = sdhci_omap_readl(omap_host, SDHCI_OMAP_DLL);
reg |= DLL_SWT;
sdhci_omap_writel(omap_host, SDHCI_OMAP_DLL, reg);
@ -325,6 +340,11 @@ static int sdhci_omap_execute_tuning(struct mmc_host *mmc, u32 opcode)
omap_host->is_tuning = true;
/*
* Stage 1: Search for a maximum pass window ignoring any
* any single point failures. If the tuning value ends up
* near it, move away from it in stage 2 below
*/
while (phase_delay <= MAX_PHASE_DELAY) {
sdhci_omap_set_dll(omap_host, phase_delay);
@ -332,10 +352,15 @@ static int sdhci_omap_execute_tuning(struct mmc_host *mmc, u32 opcode)
if (cur_match) {
if (prev_match) {
length++;
} else if (single_point_failure) {
/* ignore single point failure */
length++;
} else {
start_window = phase_delay;
length = 1;
}
} else {
single_point_failure = prev_match;
}
if (length > max_len) {
@ -353,13 +378,76 @@ static int sdhci_omap_execute_tuning(struct mmc_host *mmc, u32 opcode)
goto tuning_error;
}
/*
* Assign tuning value as a ratio of maximum pass window based
* on temperature
*/
if (temperature < -20000)
phase_delay = min(max_window + 4 * max_len - 24,
max_window +
DIV_ROUND_UP(13 * max_len, 16) * 4);
else if (temperature < 20000)
phase_delay = max_window + DIV_ROUND_UP(9 * max_len, 16) * 4;
else if (temperature < 40000)
phase_delay = max_window + DIV_ROUND_UP(8 * max_len, 16) * 4;
else if (temperature < 70000)
phase_delay = max_window + DIV_ROUND_UP(7 * max_len, 16) * 4;
else if (temperature < 90000)
phase_delay = max_window + DIV_ROUND_UP(5 * max_len, 16) * 4;
else if (temperature < 120000)
phase_delay = max_window + DIV_ROUND_UP(4 * max_len, 16) * 4;
else
phase_delay = max_window + DIV_ROUND_UP(3 * max_len, 16) * 4;
/*
* Stage 2: Search for a single point failure near the chosen tuning
* value in two steps. First in the +3 to +10 range and then in the
* +2 to -10 range. If found, move away from it in the appropriate
* direction by the appropriate amount depending on the temperature.
*/
for (i = 3; i <= 10; i++) {
sdhci_omap_set_dll(omap_host, phase_delay + i);
if (mmc_send_tuning(mmc, opcode, NULL)) {
if (temperature < 10000)
phase_delay += i + 6;
else if (temperature < 20000)
phase_delay += i - 12;
else if (temperature < 70000)
phase_delay += i - 8;
else
phase_delay += i - 6;
goto single_failure_found;
}
}
for (i = 2; i >= -10; i--) {
sdhci_omap_set_dll(omap_host, phase_delay + i);
if (mmc_send_tuning(mmc, opcode, NULL)) {
if (temperature < 10000)
phase_delay += i + 12;
else if (temperature < 20000)
phase_delay += i + 8;
else if (temperature < 70000)
phase_delay += i + 8;
else if (temperature < 90000)
phase_delay += i + 10;
else
phase_delay += i + 12;
goto single_failure_found;
}
}
single_failure_found:
reg = sdhci_omap_readl(omap_host, SDHCI_OMAP_AC12);
if (!(reg & AC12_SCLK_SEL)) {
ret = -EIO;
goto tuning_error;
}
phase_delay = max_window + 4 * (max_len >> 1);
sdhci_omap_set_dll(omap_host, phase_delay);
omap_host->is_tuning = false;