forked from Minki/linux
s390/oprofile: remove hardware sampler support
Remove hardware sampler support from oprofile module. The oprofile user space utilty has been switched to use the kernel perf interface, for which we also provide hardware sampling support. In addition the hardware sampling support is also slightly broken: it supports only 16 bits for the pid and therefore would generate wrong results on machines which have a pid >64k. Also the pt_regs structure which was passed to oprofile common code cannot necessarily be used to generate sane backtraces, since the task(s) in question may run while the samples are fed to oprofile. So the result would be more or less random. However given that the only user space tools switched to the perf interface already four years ago the hardware sampler code seems to be unused code, and therefore it should be reasonable to remove it. The timer based oprofile support continues to work. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Andreas Arnez <arnez@linux.vnet.ibm.com> Acked-by: Andreas Krebbel <krebbel@linux.vnet.ibm.com> Acked-by: Robert Richter <rric@kernel.org> Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
This commit is contained in:
Heiko Carstens
Martin Schwidefsky
parent
11a7752e01
commit
93dd49d002
@ -2788,8 +2788,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
|
||||
timer: [X86] Force use of architectural NMI
|
||||
timer mode (see also oprofile.timer
|
||||
for generic hr timer mode)
|
||||
[s390] Force legacy basic mode sampling
|
||||
(report cpu_type "timer")
|
||||
|
||||
oops=panic Always panic on oopses. Default is to just kill the
|
||||
process, but there is a small probability of
|
||||
|
||||
@ -7,4 +7,3 @@ DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \
|
||||
timer_int.o )
|
||||
|
||||
oprofile-y := $(DRIVER_OBJS) init.o
|
||||
oprofile-y += hwsampler.o
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
@ -1,63 +0,0 @@
|
||||
/*
|
||||
* CPUMF HW sampler functions and internal structures
|
||||
*
|
||||
* Copyright IBM Corp. 2010
|
||||
* Author(s): Heinz Graalfs <graalfs@de.ibm.com>
|
||||
*/
|
||||
|
||||
#ifndef HWSAMPLER_H_
|
||||
#define HWSAMPLER_H_
|
||||
|
||||
#include <linux/workqueue.h>
|
||||
#include <asm/cpu_mf.h>
|
||||
|
||||
struct hws_ssctl_request_block /* SET SAMPLING CONTROLS req block */
|
||||
{ /* bytes 0 - 7 Bit(s) */
|
||||
unsigned int s:1; /* 0: maximum buffer indicator */
|
||||
unsigned int h:1; /* 1: part. level reserved for VM use*/
|
||||
unsigned long b2_53:52; /* 2-53: zeros */
|
||||
unsigned int es:1; /* 54: sampling enable control */
|
||||
unsigned int b55_61:7; /* 55-61: - zeros */
|
||||
unsigned int cs:1; /* 62: sampling activation control */
|
||||
unsigned int b63:1; /* 63: zero */
|
||||
unsigned long interval; /* 8-15: sampling interval */
|
||||
unsigned long tear; /* 16-23: TEAR contents */
|
||||
unsigned long dear; /* 24-31: DEAR contents */
|
||||
/* 32-63: */
|
||||
unsigned long rsvrd1; /* reserved */
|
||||
unsigned long rsvrd2; /* reserved */
|
||||
unsigned long rsvrd3; /* reserved */
|
||||
unsigned long rsvrd4; /* reserved */
|
||||
};
|
||||
|
||||
struct hws_cpu_buffer {
|
||||
unsigned long first_sdbt; /* @ of 1st SDB-Table for this CP*/
|
||||
unsigned long worker_entry;
|
||||
unsigned long sample_overflow; /* taken from SDB ... */
|
||||
struct hws_qsi_info_block qsi;
|
||||
struct hws_ssctl_request_block ssctl;
|
||||
struct work_struct worker;
|
||||
atomic_t ext_params;
|
||||
unsigned long req_alert;
|
||||
unsigned long loss_of_sample_data;
|
||||
unsigned long invalid_entry_address;
|
||||
unsigned long incorrect_sdbt_entry;
|
||||
unsigned long sample_auth_change_alert;
|
||||
unsigned int finish:1;
|
||||
unsigned int oom:1;
|
||||
unsigned int stop_mode:1;
|
||||
};
|
||||
|
||||
int hwsampler_setup(void);
|
||||
int hwsampler_shutdown(void);
|
||||
int hwsampler_allocate(unsigned long sdbt, unsigned long sdb);
|
||||
int hwsampler_deallocate(void);
|
||||
unsigned long hwsampler_query_min_interval(void);
|
||||
unsigned long hwsampler_query_max_interval(void);
|
||||
int hwsampler_start_all(unsigned long interval);
|
||||
int hwsampler_stop_all(void);
|
||||
int hwsampler_deactivate(unsigned int cpu);
|
||||
int hwsampler_activate(unsigned int cpu);
|
||||
unsigned long hwsampler_get_sample_overflow_count(unsigned int cpu);
|
||||
|
||||
#endif /*HWSAMPLER_H_*/
|
||||
@ -10,488 +10,8 @@
|
||||
*/
|
||||
|
||||
#include <linux/oprofile.h>
|
||||
#include <linux/perf_event.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/errno.h>
|
||||
#include <linux/fs.h>
|
||||
#include <linux/module.h>
|
||||
#include <asm/processor.h>
|
||||
#include <asm/perf_event.h>
|
||||
|
||||
#include "../../../drivers/oprofile/oprof.h"
|
||||
|
||||
#include "hwsampler.h"
|
||||
#include "op_counter.h"
|
||||
|
||||
#define DEFAULT_INTERVAL 4127518
|
||||
|
||||
#define DEFAULT_SDBT_BLOCKS 1
|
||||
#define DEFAULT_SDB_BLOCKS 511
|
||||
|
||||
static unsigned long oprofile_hw_interval = DEFAULT_INTERVAL;
|
||||
static unsigned long oprofile_min_interval;
|
||||
static unsigned long oprofile_max_interval;
|
||||
|
||||
static unsigned long oprofile_sdbt_blocks = DEFAULT_SDBT_BLOCKS;
|
||||
static unsigned long oprofile_sdb_blocks = DEFAULT_SDB_BLOCKS;
|
||||
|
||||
static int hwsampler_enabled;
|
||||
static int hwsampler_running; /* start_mutex must be held to change */
|
||||
static int hwsampler_available;
|
||||
|
||||
static struct oprofile_operations timer_ops;
|
||||
|
||||
struct op_counter_config counter_config;
|
||||
|
||||
enum __force_cpu_type {
|
||||
reserved = 0, /* do not force */
|
||||
timer,
|
||||
};
|
||||
static int force_cpu_type;
|
||||
|
||||
static int set_cpu_type(const char *str, struct kernel_param *kp)
|
||||
{
|
||||
if (!strcmp(str, "timer")) {
|
||||
force_cpu_type = timer;
|
||||
printk(KERN_INFO "oprofile: forcing timer to be returned "
|
||||
"as cpu type\n");
|
||||
} else {
|
||||
force_cpu_type = 0;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
module_param_call(cpu_type, set_cpu_type, NULL, NULL, 0);
|
||||
MODULE_PARM_DESC(cpu_type, "Force legacy basic mode sampling"
|
||||
"(report cpu_type \"timer\"");
|
||||
|
||||
static int __oprofile_hwsampler_start(void)
|
||||
{
|
||||
int retval;
|
||||
|
||||
retval = hwsampler_allocate(oprofile_sdbt_blocks, oprofile_sdb_blocks);
|
||||
if (retval)
|
||||
return retval;
|
||||
|
||||
retval = hwsampler_start_all(oprofile_hw_interval);
|
||||
if (retval)
|
||||
hwsampler_deallocate();
|
||||
|
||||
return retval;
|
||||
}
|
||||
|
||||
static int oprofile_hwsampler_start(void)
|
||||
{
|
||||
int retval;
|
||||
|
||||
hwsampler_running = hwsampler_enabled;
|
||||
|
||||
if (!hwsampler_running)
|
||||
return timer_ops.start();
|
||||
|
||||
retval = perf_reserve_sampling();
|
||||
if (retval)
|
||||
return retval;
|
||||
|
||||
retval = __oprofile_hwsampler_start();
|
||||
if (retval)
|
||||
perf_release_sampling();
|
||||
|
||||
return retval;
|
||||
}
|
||||
|
||||
static void oprofile_hwsampler_stop(void)
|
||||
{
|
||||
if (!hwsampler_running) {
|
||||
timer_ops.stop();
|
||||
return;
|
||||
}
|
||||
|
||||
hwsampler_stop_all();
|
||||
hwsampler_deallocate();
|
||||
perf_release_sampling();
|
||||
return;
|
||||
}
|
||||
|
||||
/*
|
||||
* File ops used for:
|
||||
* /dev/oprofile/0/enabled
|
||||
* /dev/oprofile/hwsampling/hwsampler (cpu_type = timer)
|
||||
*/
|
||||
|
||||
static ssize_t hwsampler_read(struct file *file, char __user *buf,
|
||||
size_t count, loff_t *offset)
|
||||
{
|
||||
return oprofilefs_ulong_to_user(hwsampler_enabled, buf, count, offset);
|
||||
}
|
||||
|
||||
static ssize_t hwsampler_write(struct file *file, char const __user *buf,
|
||||
size_t count, loff_t *offset)
|
||||
{
|
||||
unsigned long val;
|
||||
int retval;
|
||||
|
||||
if (*offset)
|
||||
return -EINVAL;
|
||||
|
||||
retval = oprofilefs_ulong_from_user(&val, buf, count);
|
||||
if (retval <= 0)
|
||||
return retval;
|
||||
|
||||
if (val != 0 && val != 1)
|
||||
return -EINVAL;
|
||||
|
||||
if (oprofile_started)
|
||||
/*
|
||||
* save to do without locking as we set
|
||||
* hwsampler_running in start() when start_mutex is
|
||||
* held
|
||||
*/
|
||||
return -EBUSY;
|
||||
|
||||
hwsampler_enabled = val;
|
||||
|
||||
return count;
|
||||
}
|
||||
|
||||
static const struct file_operations hwsampler_fops = {
|
||||
.read = hwsampler_read,
|
||||
.write = hwsampler_write,
|
||||
};
|
||||
|
||||
/*
|
||||
* File ops used for:
|
||||
* /dev/oprofile/0/count
|
||||
* /dev/oprofile/hwsampling/hw_interval (cpu_type = timer)
|
||||
*
|
||||
* Make sure that the value is within the hardware range.
|
||||
*/
|
||||
|
||||
static ssize_t hw_interval_read(struct file *file, char __user *buf,
|
||||
size_t count, loff_t *offset)
|
||||
{
|
||||
return oprofilefs_ulong_to_user(oprofile_hw_interval, buf,
|
||||
count, offset);
|
||||
}
|
||||
|
||||
static ssize_t hw_interval_write(struct file *file, char const __user *buf,
|
||||
size_t count, loff_t *offset)
|
||||
{
|
||||
unsigned long val;
|
||||
int retval;
|
||||
|
||||
if (*offset)
|
||||
return -EINVAL;
|
||||
retval = oprofilefs_ulong_from_user(&val, buf, count);
|
||||
if (retval <= 0)
|
||||
return retval;
|
||||
if (val < oprofile_min_interval)
|
||||
oprofile_hw_interval = oprofile_min_interval;
|
||||
else if (val > oprofile_max_interval)
|
||||
oprofile_hw_interval = oprofile_max_interval;
|
||||
else
|
||||
oprofile_hw_interval = val;
|
||||
|
||||
return count;
|
||||
}
|
||||
|
||||
static const struct file_operations hw_interval_fops = {
|
||||
.read = hw_interval_read,
|
||||
.write = hw_interval_write,
|
||||
};
|
||||
|
||||
/*
|
||||
* File ops used for:
|
||||
* /dev/oprofile/0/event
|
||||
* Only a single event with number 0 is supported with this counter.
|
||||
*
|
||||
* /dev/oprofile/0/unit_mask
|
||||
* This is a dummy file needed by the user space tools.
|
||||
* No value other than 0 is accepted or returned.
|
||||
*/
|
||||
|
||||
static ssize_t hwsampler_zero_read(struct file *file, char __user *buf,
|
||||
size_t count, loff_t *offset)
|
||||
{
|
||||
return oprofilefs_ulong_to_user(0, buf, count, offset);
|
||||
}
|
||||
|
||||
static ssize_t hwsampler_zero_write(struct file *file, char const __user *buf,
|
||||
size_t count, loff_t *offset)
|
||||
{
|
||||
unsigned long val;
|
||||
int retval;
|
||||
|
||||
if (*offset)
|
||||
return -EINVAL;
|
||||
|
||||
retval = oprofilefs_ulong_from_user(&val, buf, count);
|
||||
if (retval <= 0)
|
||||
return retval;
|
||||
if (val != 0)
|
||||
return -EINVAL;
|
||||
return count;
|
||||
}
|
||||
|
||||
static const struct file_operations zero_fops = {
|
||||
.read = hwsampler_zero_read,
|
||||
.write = hwsampler_zero_write,
|
||||
};
|
||||
|
||||
/* /dev/oprofile/0/kernel file ops. */
|
||||
|
||||
static ssize_t hwsampler_kernel_read(struct file *file, char __user *buf,
|
||||
size_t count, loff_t *offset)
|
||||
{
|
||||
return oprofilefs_ulong_to_user(counter_config.kernel,
|
||||
buf, count, offset);
|
||||
}
|
||||
|
||||
static ssize_t hwsampler_kernel_write(struct file *file, char const __user *buf,
|
||||
size_t count, loff_t *offset)
|
||||
{
|
||||
unsigned long val;
|
||||
int retval;
|
||||
|
||||
if (*offset)
|
||||
return -EINVAL;
|
||||
|
||||
retval = oprofilefs_ulong_from_user(&val, buf, count);
|
||||
if (retval <= 0)
|
||||
return retval;
|
||||
|
||||
if (val != 0 && val != 1)
|
||||
return -EINVAL;
|
||||
|
||||
counter_config.kernel = val;
|
||||
|
||||
return count;
|
||||
}
|
||||
|
||||
static const struct file_operations kernel_fops = {
|
||||
.read = hwsampler_kernel_read,
|
||||
.write = hwsampler_kernel_write,
|
||||
};
|
||||
|
||||
/* /dev/oprofile/0/user file ops. */
|
||||
|
||||
static ssize_t hwsampler_user_read(struct file *file, char __user *buf,
|
||||
size_t count, loff_t *offset)
|
||||
{
|
||||
return oprofilefs_ulong_to_user(counter_config.user,
|
||||
buf, count, offset);
|
||||
}
|
||||
|
||||
static ssize_t hwsampler_user_write(struct file *file, char const __user *buf,
|
||||
size_t count, loff_t *offset)
|
||||
{
|
||||
unsigned long val;
|
||||
int retval;
|
||||
|
||||
if (*offset)
|
||||
return -EINVAL;
|
||||
|
||||
retval = oprofilefs_ulong_from_user(&val, buf, count);
|
||||
if (retval <= 0)
|
||||
return retval;
|
||||
|
||||
if (val != 0 && val != 1)
|
||||
return -EINVAL;
|
||||
|
||||
counter_config.user = val;
|
||||
|
||||
return count;
|
||||
}
|
||||
|
||||
static const struct file_operations user_fops = {
|
||||
.read = hwsampler_user_read,
|
||||
.write = hwsampler_user_write,
|
||||
};
|
||||
|
||||
|
||||
/*
|
||||
* File ops used for: /dev/oprofile/timer/enabled
|
||||
* The value always has to be the inverted value of hwsampler_enabled. So
|
||||
* no separate variable is created. That way we do not need locking.
|
||||
*/
|
||||
|
||||
static ssize_t timer_enabled_read(struct file *file, char __user *buf,
|
||||
size_t count, loff_t *offset)
|
||||
{
|
||||
return oprofilefs_ulong_to_user(!hwsampler_enabled, buf, count, offset);
|
||||
}
|
||||
|
||||
static ssize_t timer_enabled_write(struct file *file, char const __user *buf,
|
||||
size_t count, loff_t *offset)
|
||||
{
|
||||
unsigned long val;
|
||||
int retval;
|
||||
|
||||
if (*offset)
|
||||
return -EINVAL;
|
||||
|
||||
retval = oprofilefs_ulong_from_user(&val, buf, count);
|
||||
if (retval <= 0)
|
||||
return retval;
|
||||
|
||||
if (val != 0 && val != 1)
|
||||
return -EINVAL;
|
||||
|
||||
/* Timer cannot be disabled without having hardware sampling. */
|
||||
if (val == 0 && !hwsampler_available)
|
||||
return -EINVAL;
|
||||
|
||||
if (oprofile_started)
|
||||
/*
|
||||
* save to do without locking as we set
|
||||
* hwsampler_running in start() when start_mutex is
|
||||
* held
|
||||
*/
|
||||
return -EBUSY;
|
||||
|
||||
hwsampler_enabled = !val;
|
||||
|
||||
return count;
|
||||
}
|
||||
|
||||
static const struct file_operations timer_enabled_fops = {
|
||||
.read = timer_enabled_read,
|
||||
.write = timer_enabled_write,
|
||||
};
|
||||
|
||||
|
||||
static int oprofile_create_hwsampling_files(struct dentry *root)
|
||||
{
|
||||
struct dentry *dir;
|
||||
|
||||
dir = oprofilefs_mkdir(root, "timer");
|
||||
if (!dir)
|
||||
return -EINVAL;
|
||||
|
||||
oprofilefs_create_file(dir, "enabled", &timer_enabled_fops);
|
||||
|
||||
if (!hwsampler_available)
|
||||
return 0;
|
||||
|
||||
/* reinitialize default values */
|
||||
hwsampler_enabled = 1;
|
||||
counter_config.kernel = 1;
|
||||
counter_config.user = 1;
|
||||
|
||||
if (!force_cpu_type) {
|
||||
/*
|
||||
* Create the counter file system. A single virtual
|
||||
* counter is created which can be used to
|
||||
* enable/disable hardware sampling dynamically from
|
||||
* user space. The user space will configure a single
|
||||
* counter with a single event. The value of 'event'
|
||||
* and 'unit_mask' are not evaluated by the kernel code
|
||||
* and can only be set to 0.
|
||||
*/
|
||||
|
||||
dir = oprofilefs_mkdir(root, "0");
|
||||
if (!dir)
|
||||
return -EINVAL;
|
||||
|
||||
oprofilefs_create_file(dir, "enabled", &hwsampler_fops);
|
||||
oprofilefs_create_file(dir, "event", &zero_fops);
|
||||
oprofilefs_create_file(dir, "count", &hw_interval_fops);
|
||||
oprofilefs_create_file(dir, "unit_mask", &zero_fops);
|
||||
oprofilefs_create_file(dir, "kernel", &kernel_fops);
|
||||
oprofilefs_create_file(dir, "user", &user_fops);
|
||||
oprofilefs_create_ulong(dir, "hw_sdbt_blocks",
|
||||
&oprofile_sdbt_blocks);
|
||||
|
||||
} else {
|
||||
/*
|
||||
* Hardware sampling can be used but the cpu_type is
|
||||
* forced to timer in order to deal with legacy user
|
||||
* space tools. The /dev/oprofile/hwsampling fs is
|
||||
* provided in that case.
|
||||
*/
|
||||
dir = oprofilefs_mkdir(root, "hwsampling");
|
||||
if (!dir)
|
||||
return -EINVAL;
|
||||
|
||||
oprofilefs_create_file(dir, "hwsampler",
|
||||
&hwsampler_fops);
|
||||
oprofilefs_create_file(dir, "hw_interval",
|
||||
&hw_interval_fops);
|
||||
oprofilefs_create_ro_ulong(dir, "hw_min_interval",
|
||||
&oprofile_min_interval);
|
||||
oprofilefs_create_ro_ulong(dir, "hw_max_interval",
|
||||
&oprofile_max_interval);
|
||||
oprofilefs_create_ulong(dir, "hw_sdbt_blocks",
|
||||
&oprofile_sdbt_blocks);
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int oprofile_hwsampler_init(struct oprofile_operations *ops)
|
||||
{
|
||||
/*
|
||||
* Initialize the timer mode infrastructure as well in order
|
||||
* to be able to switch back dynamically. oprofile_timer_init
|
||||
* is not supposed to fail.
|
||||
*/
|
||||
if (oprofile_timer_init(ops))
|
||||
BUG();
|
||||
|
||||
memcpy(&timer_ops, ops, sizeof(timer_ops));
|
||||
ops->create_files = oprofile_create_hwsampling_files;
|
||||
|
||||
/*
|
||||
* If the user space tools do not support newer cpu types,
|
||||
* the force_cpu_type module parameter
|
||||
* can be used to always return \"timer\" as cpu type.
|
||||
*/
|
||||
if (force_cpu_type != timer) {
|
||||
struct cpuid id;
|
||||
|
||||
get_cpu_id (&id);
|
||||
|
||||
switch (id.machine) {
|
||||
case 0x2097: case 0x2098: ops->cpu_type = "s390/z10"; break;
|
||||
case 0x2817: case 0x2818: ops->cpu_type = "s390/z196"; break;
|
||||
case 0x2827: case 0x2828: ops->cpu_type = "s390/zEC12"; break;
|
||||
case 0x2964: case 0x2965: ops->cpu_type = "s390/z13"; break;
|
||||
default: return -ENODEV;
|
||||
}
|
||||
}
|
||||
|
||||
if (hwsampler_setup())
|
||||
return -ENODEV;
|
||||
|
||||
/*
|
||||
* Query the range for the sampling interval from the
|
||||
* hardware.
|
||||
*/
|
||||
oprofile_min_interval = hwsampler_query_min_interval();
|
||||
if (oprofile_min_interval == 0)
|
||||
return -ENODEV;
|
||||
oprofile_max_interval = hwsampler_query_max_interval();
|
||||
if (oprofile_max_interval == 0)
|
||||
return -ENODEV;
|
||||
|
||||
/* The initial value should be sane */
|
||||
if (oprofile_hw_interval < oprofile_min_interval)
|
||||
oprofile_hw_interval = oprofile_min_interval;
|
||||
if (oprofile_hw_interval > oprofile_max_interval)
|
||||
oprofile_hw_interval = oprofile_max_interval;
|
||||
|
||||
printk(KERN_INFO "oprofile: System z hardware sampling "
|
||||
"facility found.\n");
|
||||
|
||||
ops->start = oprofile_hwsampler_start;
|
||||
ops->stop = oprofile_hwsampler_stop;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void oprofile_hwsampler_exit(void)
|
||||
{
|
||||
hwsampler_shutdown();
|
||||
}
|
||||
|
||||
static int __s390_backtrace(void *data, unsigned long address)
|
||||
{
|
||||
@ -514,18 +34,9 @@ static void s390_backtrace(struct pt_regs *regs, unsigned int depth)
|
||||
int __init oprofile_arch_init(struct oprofile_operations *ops)
|
||||
{
|
||||
ops->backtrace = s390_backtrace;
|
||||
|
||||
/*
|
||||
* -ENODEV is not reported to the caller. The module itself
|
||||
* will use the timer mode sampling as fallback and this is
|
||||
* always available.
|
||||
*/
|
||||
hwsampler_available = oprofile_hwsampler_init(ops) == 0;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
void oprofile_arch_exit(void)
|
||||
{
|
||||
oprofile_hwsampler_exit();
|
||||
}
|
||||
|
||||
@ -1,21 +0,0 @@
|
||||
/*
|
||||
* Copyright IBM Corp. 2011
|
||||
* Author(s): Andreas Krebbel (krebbel@linux.vnet.ibm.com)
|
||||
*
|
||||
* @remark Copyright 2011 OProfile authors
|
||||
*/
|
||||
|
||||
#ifndef OP_COUNTER_H
|
||||
#define OP_COUNTER_H
|
||||
|
||||
struct op_counter_config {
|
||||
/* `enabled' maps to the hwsampler_file variable. */
|
||||
/* `count' maps to the oprofile_hw_interval variable. */
|
||||
/* `event' and `unit_mask' are unused. */
|
||||
unsigned long kernel;
|
||||
unsigned long user;
|
||||
};
|
||||
|
||||
extern struct op_counter_config counter_config;
|
||||
|
||||
#endif /* OP_COUNTER_H */
|
||||
Loading…
Reference in New Issue
Block a user