[SCSI] lpfc 8.2.7 : Change device reset behavior

Prior handler was only waiting for I/O on one lun to finish before
returning completion. Now, wait for all LUNs on the target.
Also performed some rudimentary cleanup while in this code.

Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
This commit is contained in:
James Smart 2008-06-14 22:52:38 -04:00 committed by James Bottomley
parent 235f7f25f4
commit 915caaaf62

View File

@ -849,14 +849,15 @@ lpfc_scsi_tgt_reset(struct lpfc_scsi_buf *lpfc_cmd, struct lpfc_vport *vport,
struct lpfc_iocbq *iocbq;
struct lpfc_iocbq *iocbqrsp;
int ret;
int status;
if (!rdata->pnode || !NLP_CHK_NODE_ACT(rdata->pnode))
return FAILED;
lpfc_cmd->rdata = rdata;
ret = lpfc_scsi_prep_task_mgmt_cmd(vport, lpfc_cmd, lun,
status = lpfc_scsi_prep_task_mgmt_cmd(vport, lpfc_cmd, lun,
FCP_TARGET_RESET);
if (!ret)
if (!status)
return FAILED;
iocbq = &lpfc_cmd->cur_iocbq;
@ -869,12 +870,15 @@ lpfc_scsi_tgt_reset(struct lpfc_scsi_buf *lpfc_cmd, struct lpfc_vport *vport,
lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
"0702 Issue Target Reset to TGT %d Data: x%x x%x\n",
tgt_id, rdata->pnode->nlp_rpi, rdata->pnode->nlp_flag);
ret = lpfc_sli_issue_iocb_wait(phba,
status = lpfc_sli_issue_iocb_wait(phba,
&phba->sli.ring[phba->sli.fcp_ring],
iocbq, iocbqrsp, lpfc_cmd->timeout);
if (ret != IOCB_SUCCESS) {
if (ret == IOCB_TIMEDOUT)
if (status != IOCB_SUCCESS) {
if (status == IOCB_TIMEDOUT) {
iocbq->iocb_cmpl = lpfc_tskmgmt_def_cmpl;
ret = TIMEOUT_ERROR;
} else
ret = FAILED;
lpfc_cmd->status = IOSTAT_DRIVER_REJECT;
} else {
ret = SUCCESS;
@ -1142,121 +1146,96 @@ lpfc_device_reset_handler(struct scsi_cmnd *cmnd)
struct lpfc_iocbq *iocbq, *iocbqrsp;
struct lpfc_rport_data *rdata = cmnd->device->hostdata;
struct lpfc_nodelist *pnode = rdata->pnode;
uint32_t cmd_result = 0, cmd_status = 0;
int ret = FAILED;
int iocb_status = IOCB_SUCCESS;
int cnt, loopcnt;
unsigned long later;
int ret = SUCCESS;
int status;
int cnt;
lpfc_block_error_handler(cmnd);
loopcnt = 0;
/*
* If target is not in a MAPPED state, delay the reset until
* target is rediscovered or devloss timeout expires.
*/
while (1) {
later = msecs_to_jiffies(2 * vport->cfg_devloss_tmo * 1000) + jiffies;
while (time_after(later, jiffies)) {
if (!pnode || !NLP_CHK_NODE_ACT(pnode))
goto out;
if (pnode->nlp_state != NLP_STE_MAPPED_NODE) {
schedule_timeout_uninterruptible(msecs_to_jiffies(500));
loopcnt++;
rdata = cmnd->device->hostdata;
if (!rdata ||
(loopcnt > ((vport->cfg_devloss_tmo * 2) + 1))){
lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
"0721 LUN Reset rport "
"failure: cnt x%x rdata x%p\n",
loopcnt, rdata);
goto out;
}
pnode = rdata->pnode;
if (!pnode || !NLP_CHK_NODE_ACT(pnode))
goto out;
}
return FAILED;
if (pnode->nlp_state == NLP_STE_MAPPED_NODE)
break;
schedule_timeout_uninterruptible(msecs_to_jiffies(500));
rdata = cmnd->device->hostdata;
if (!rdata)
break;
pnode = rdata->pnode;
}
if (!rdata || pnode->nlp_state != NLP_STE_MAPPED_NODE) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
"0721 LUN Reset rport "
"failure: msec x%x rdata x%p\n",
jiffies_to_msecs(jiffies - later), rdata);
return FAILED;
}
lpfc_cmd = lpfc_get_scsi_buf(phba);
if (lpfc_cmd == NULL)
goto out;
return FAILED;
lpfc_cmd->timeout = 60;
lpfc_cmd->rdata = rdata;
ret = lpfc_scsi_prep_task_mgmt_cmd(vport, lpfc_cmd, cmnd->device->lun,
status = lpfc_scsi_prep_task_mgmt_cmd(vport, lpfc_cmd,
cmnd->device->lun,
FCP_TARGET_RESET);
if (!ret)
goto out_free_scsi_buf;
if (!status) {
lpfc_release_scsi_buf(phba, lpfc_cmd);
return FAILED;
}
iocbq = &lpfc_cmd->cur_iocbq;
/* get a buffer for this IOCB command response */
iocbqrsp = lpfc_sli_get_iocbq(phba);
if (iocbqrsp == NULL)
goto out_free_scsi_buf;
if (iocbqrsp == NULL) {
lpfc_release_scsi_buf(phba, lpfc_cmd);
return FAILED;
}
lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
"0703 Issue target reset to TGT %d LUN %d "
"rpi x%x nlp_flag x%x\n", cmnd->device->id,
cmnd->device->lun, pnode->nlp_rpi, pnode->nlp_flag);
iocb_status = lpfc_sli_issue_iocb_wait(phba,
status = lpfc_sli_issue_iocb_wait(phba,
&phba->sli.ring[phba->sli.fcp_ring],
iocbq, iocbqrsp, lpfc_cmd->timeout);
if (iocb_status == IOCB_TIMEDOUT)
if (status == IOCB_TIMEDOUT) {
iocbq->iocb_cmpl = lpfc_tskmgmt_def_cmpl;
if (iocb_status == IOCB_SUCCESS)
ret = SUCCESS;
else
ret = iocb_status;
cmd_result = iocbqrsp->iocb.un.ulpWord[4];
cmd_status = iocbqrsp->iocb.ulpStatus;
lpfc_sli_release_iocbq(phba, iocbqrsp);
/*
* All outstanding txcmplq I/Os should have been aborted by the device.
* Unfortunately, some targets do not abide by this forcing the driver
* to double check.
*/
cnt = lpfc_sli_sum_iocb(vport, cmnd->device->id, cmnd->device->lun,
LPFC_CTX_LUN);
if (cnt)
lpfc_sli_abort_iocb(vport, &phba->sli.ring[phba->sli.fcp_ring],
cmnd->device->id, cmnd->device->lun,
LPFC_CTX_LUN);
loopcnt = 0;
while(cnt) {
schedule_timeout_uninterruptible(LPFC_RESET_WAIT*HZ);
if (++loopcnt
> (2 * vport->cfg_devloss_tmo)/LPFC_RESET_WAIT)
break;
cnt = lpfc_sli_sum_iocb(vport, cmnd->device->id,
cmnd->device->lun, LPFC_CTX_LUN);
}
if (cnt) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
"0719 device reset I/O flush failure: "
"cnt x%x\n", cnt);
ret = TIMEOUT_ERROR;
} else {
if (status != IOCB_SUCCESS)
ret = FAILED;
}
out_free_scsi_buf:
if (iocb_status != IOCB_TIMEDOUT) {
lpfc_release_scsi_buf(phba, lpfc_cmd);
}
lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
"0713 SCSI layer issued device reset (%d, %d) "
"return x%x status x%x result x%x\n",
cmnd->device->id, cmnd->device->lun, ret,
cmd_status, cmd_result);
out:
iocbqrsp->iocb.ulpStatus,
iocbqrsp->iocb.un.ulpWord[4]);
lpfc_sli_release_iocbq(phba, iocbqrsp);
cnt = lpfc_sli_sum_iocb(vport, cmnd->device->id, cmnd->device->lun,
LPFC_CTX_TGT);
if (cnt)
lpfc_sli_abort_iocb(vport, &phba->sli.ring[phba->sli.fcp_ring],
cmnd->device->id, cmnd->device->lun,
LPFC_CTX_TGT);
later = msecs_to_jiffies(2 * vport->cfg_devloss_tmo * 1000) + jiffies;
while (time_after(later, jiffies) && cnt) {
schedule_timeout_uninterruptible(msecs_to_jiffies(20));
cnt = lpfc_sli_sum_iocb(vport, cmnd->device->id,
cmnd->device->lun, LPFC_CTX_TGT);
}
if (cnt) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
"0719 device reset I/O flush failure: "
"cnt x%x\n", cnt);
ret = FAILED;
}
return ret;
}
@ -1268,19 +1247,12 @@ lpfc_bus_reset_handler(struct scsi_cmnd *cmnd)
struct lpfc_hba *phba = vport->phba;
struct lpfc_nodelist *ndlp = NULL;
int match;
int ret = FAILED, i, err_count = 0;
int cnt, loopcnt;
int ret = SUCCESS, status, i;
int cnt;
struct lpfc_scsi_buf * lpfc_cmd;
unsigned long later;
lpfc_block_error_handler(cmnd);
lpfc_cmd = lpfc_get_scsi_buf(phba);
if (lpfc_cmd == NULL)
goto out;
/* The lpfc_cmd storage is reused. Set all loop invariants. */
lpfc_cmd->timeout = 60;
/*
* Since the driver manages a single bus device, reset all
* targets known to the driver. Should any target reset
@ -1294,7 +1266,7 @@ lpfc_bus_reset_handler(struct scsi_cmnd *cmnd)
if (!NLP_CHK_NODE_ACT(ndlp))
continue;
if (ndlp->nlp_state == NLP_STE_MAPPED_NODE &&
i == ndlp->nlp_sid &&
ndlp->nlp_sid == i &&
ndlp->rport) {
match = 1;
break;
@ -1303,27 +1275,22 @@ lpfc_bus_reset_handler(struct scsi_cmnd *cmnd)
spin_unlock_irq(shost->host_lock);
if (!match)
continue;
ret = lpfc_scsi_tgt_reset(lpfc_cmd, vport, i,
lpfc_cmd = lpfc_get_scsi_buf(phba);
if (lpfc_cmd) {
lpfc_cmd->timeout = 60;
status = lpfc_scsi_tgt_reset(lpfc_cmd, vport, i,
cmnd->device->lun,
ndlp->rport->dd_data);
if (ret != SUCCESS) {
if (status != TIMEOUT_ERROR)
lpfc_release_scsi_buf(phba, lpfc_cmd);
}
if (!lpfc_cmd || status != SUCCESS) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
"0700 Bus Reset on target %d failed\n",
i);
err_count++;
break;
}
}
if (ret != IOCB_TIMEDOUT)
lpfc_release_scsi_buf(phba, lpfc_cmd);
if (err_count == 0)
ret = SUCCESS;
else
ret = FAILED;
}
}
/*
* All outstanding txcmplq I/Os should have been aborted by
* the targets. Unfortunately, some targets do not abide by
@ -1333,27 +1300,19 @@ lpfc_bus_reset_handler(struct scsi_cmnd *cmnd)
if (cnt)
lpfc_sli_abort_iocb(vport, &phba->sli.ring[phba->sli.fcp_ring],
0, 0, LPFC_CTX_HOST);
loopcnt = 0;
while(cnt) {
schedule_timeout_uninterruptible(LPFC_RESET_WAIT*HZ);
if (++loopcnt
> (2 * vport->cfg_devloss_tmo)/LPFC_RESET_WAIT)
break;
later = msecs_to_jiffies(2 * vport->cfg_devloss_tmo * 1000) + jiffies;
while (time_after(later, jiffies) && cnt) {
schedule_timeout_uninterruptible(msecs_to_jiffies(20));
cnt = lpfc_sli_sum_iocb(vport, 0, 0, LPFC_CTX_HOST);
}
if (cnt) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
"0715 Bus Reset I/O flush failure: "
"cnt x%x left x%x\n", cnt, i);
ret = FAILED;
}
lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
"0714 SCSI layer issued Bus Reset Data: x%x\n", ret);
out:
return ret;
}