forked from Minki/linux
ARM: Kirkwood: Add support for DLink DIR665
Add a device tree description of the DLINK DIR665 wireless access point. The support for the 88E6171 switch will be added in a later patch. Signed-off-by: Claudio Leite <leitec@staticky.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Link: https://lkml.kernel.org/r/1414793613-11798-2-git-send-email-andrew@lunn.ch Signed-off-by: Jason Cooper <jason@lakedaemon.net>
This commit is contained in:
Claudio Leite
Jason Cooper
parent
ab3172efdb
commit
8c0ff7a1df
@ -104,6 +104,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += kirkwood-b3.dtb \
|
||||
kirkwood-d2net.dtb \
|
||||
kirkwood-db-88f6281.dtb \
|
||||
kirkwood-db-88f6282.dtb \
|
||||
kirkwood-dir665.dtb \
|
||||
kirkwood-dns320.dtb \
|
||||
kirkwood-dns325.dtb \
|
||||
kirkwood-dockstar.dtb \
|
||||
|
||||
233
arch/arm/boot/dts/kirkwood-dir665.dts
Normal file
233
arch/arm/boot/dts/kirkwood-dir665.dts
Normal file
@ -0,0 +1,233 @@
|
||||
/*
|
||||
* Copyright (C) 2014 Claudio Leite <leitec@staticky.com>
|
||||
*
|
||||
* This file is licensed under the terms of the GNU General Public
|
||||
* License version 2. This program is licensed "as is" without any
|
||||
* warranty of any kind, whether express or implied.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "kirkwood.dtsi"
|
||||
#include "kirkwood-6281.dtsi"
|
||||
|
||||
/ {
|
||||
model = "D-Link DIR-665";
|
||||
compatible = "dlink,dir-665", "marvell,kirkwood-88f6281", "marvell,kirkwood";
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x00000000 0x8000000>; /* 128 MB */
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200n8 earlyprintk";
|
||||
stdout-path = &uart0;
|
||||
};
|
||||
|
||||
mbus {
|
||||
pcie-controller {
|
||||
status = "okay";
|
||||
|
||||
pcie@1,0 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ocp@f1000000 {
|
||||
pinctrl: pin-controller@10000 {
|
||||
pinctrl-0 =< &pmx_led_usb
|
||||
&pmx_led_internet_blue
|
||||
&pmx_led_internet_amber
|
||||
&pmx_led_5g &pmx_led_status_blue
|
||||
&pmx_led_wps &pmx_led_status_amber
|
||||
&pmx_led_24g
|
||||
&pmx_btn_restart &pmx_btn_wps>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
pmx_led_usb: pmx-led-usb {
|
||||
marvell,pins = "mpp12";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_led_internet_blue: pmx-led-internet-blue {
|
||||
marvell,pins = "mpp42";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_led_internet_amber: pmx-led-internet-amber {
|
||||
marvell,pins = "mpp43";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_led_5g: pmx-led-5g {
|
||||
marvell,pins = "mpp44";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_led_status_blue: pmx-led-status-blue {
|
||||
marvell,pins = "mpp45";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_led_wps: pmx-led-wps {
|
||||
marvell,pins = "mpp47";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_led_status_amber: pmx-led-status-amber {
|
||||
marvell,pins = "mpp48";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_led_24g: pmx-led-24g {
|
||||
marvell,pins = "mpp49";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_btn_restart: pmx-btn-restart {
|
||||
marvell,pins = "mpp28";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_btn_wps: pmx-btn-wps {
|
||||
marvell,pins = "mpp46";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
};
|
||||
|
||||
spi@10600 {
|
||||
status = "okay";
|
||||
m25p80@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "mxicy,mx25l12805d";
|
||||
spi-max-frequency = <50000000>;
|
||||
reg = <0>;
|
||||
|
||||
partition@0 {
|
||||
label = "uboot";
|
||||
reg = <0x0 0x30000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@30000 {
|
||||
label = "nvram";
|
||||
reg = <0x30000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@40000 {
|
||||
label = "kernel";
|
||||
reg = <0x40000 0x180000>;
|
||||
};
|
||||
|
||||
partition@1c0000 {
|
||||
label = "rootfs";
|
||||
reg = <0x1c0000 0xe00000>;
|
||||
};
|
||||
|
||||
cal_data: partition@fc0000 {
|
||||
label = "cal_data";
|
||||
reg = <0xfc0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@fd0000 {
|
||||
label = "lang_pack";
|
||||
reg = <0xfd0000 0x30000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
serial@12000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
i2c@11000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ehci@50000 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
blue-usb {
|
||||
label = "dir665:blue:usb";
|
||||
gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
blue-internet {
|
||||
/* Can only be turned on if the Internet
|
||||
* Ethernet port has Link
|
||||
*/
|
||||
label = "dir665:blue:internet";
|
||||
gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
amber-internet {
|
||||
label = "dir665:amber:internet";
|
||||
gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
blue-wifi5g {
|
||||
label = "dir665:blue:5g";
|
||||
gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
blue-status {
|
||||
label = "dir665:blue:status";
|
||||
gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
blue-wps {
|
||||
label = "dir665:blue:wps";
|
||||
gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
amber-status {
|
||||
label = "dir665:amber:status";
|
||||
gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
blue-24g {
|
||||
label = "dir665:blue:24g";
|
||||
gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
wps {
|
||||
label = "wps";
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mdio {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* eth0 is connected to a Marvell 88E6171 switch, without a PHY. So set
|
||||
* fixed speed and duplex. */
|
||||
ð0 {
|
||||
status = "okay";
|
||||
|
||||
ethernet0-port@0 {
|
||||
speed = <1000>;
|
||||
duplex = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
/* eth1 is connected to the switch as well. However DSA only supports a
|
||||
* single CPU port. So leave this port disabled to avoid confusion. */
|
||||
|
||||
ð1 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
/* There is no battery on the boards, so the RTC does not keep time
|
||||
* when there is no power, making it useless. */
|
||||
&rtc {
|
||||
status = "disabled";
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user