forked from Minki/linux
rtc: rtc-mv: Add support for clk to avoid lockups
The Marvell RTC on Kirkwood makes use of the runit clock. Ensure the driver clk_prepare_enable() this clock, otherwise there is a danger the SoC will lockup when accessing RTC registers with the clock disabled. Reported-by: Simon Baatz <gmbnomis@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Simon Baatz <gmbnomis@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
This commit is contained in:
parent
de88747f51
commit
89c58c198b
@ -75,6 +75,7 @@
|
||||
compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
|
||||
reg = <0x10300 0x20>;
|
||||
interrupts = <53>;
|
||||
clocks = <&gate_clk 7>;
|
||||
};
|
||||
|
||||
spi@10600 {
|
||||
|
@ -14,6 +14,7 @@
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/clk.h>
|
||||
#include <linux/gfp.h>
|
||||
#include <linux/module.h>
|
||||
|
||||
@ -41,6 +42,7 @@ struct rtc_plat_data {
|
||||
struct rtc_device *rtc;
|
||||
void __iomem *ioaddr;
|
||||
int irq;
|
||||
struct clk *clk;
|
||||
};
|
||||
|
||||
static int mv_rtc_set_time(struct device *dev, struct rtc_time *tm)
|
||||
@ -221,6 +223,7 @@ static int mv_rtc_probe(struct platform_device *pdev)
|
||||
struct rtc_plat_data *pdata;
|
||||
resource_size_t size;
|
||||
u32 rtc_time;
|
||||
int ret = 0;
|
||||
|
||||
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||
if (!res)
|
||||
@ -239,11 +242,17 @@ static int mv_rtc_probe(struct platform_device *pdev)
|
||||
if (!pdata->ioaddr)
|
||||
return -ENOMEM;
|
||||
|
||||
pdata->clk = devm_clk_get(&pdev->dev, NULL);
|
||||
/* Not all SoCs require a clock.*/
|
||||
if (!IS_ERR(pdata->clk))
|
||||
clk_prepare_enable(pdata->clk);
|
||||
|
||||
/* make sure the 24 hours mode is enabled */
|
||||
rtc_time = readl(pdata->ioaddr + RTC_TIME_REG_OFFS);
|
||||
if (rtc_time & RTC_HOURS_12H_MODE) {
|
||||
dev_err(&pdev->dev, "24 Hours mode not supported.\n");
|
||||
return -EINVAL;
|
||||
ret = -EINVAL;
|
||||
goto out;
|
||||
}
|
||||
|
||||
/* make sure it is actually functional */
|
||||
@ -252,7 +261,8 @@ static int mv_rtc_probe(struct platform_device *pdev)
|
||||
rtc_time = readl(pdata->ioaddr + RTC_TIME_REG_OFFS);
|
||||
if (rtc_time == 0x01000000) {
|
||||
dev_err(&pdev->dev, "internal RTC not ticking\n");
|
||||
return -ENODEV;
|
||||
ret = -ENODEV;
|
||||
goto out;
|
||||
}
|
||||
}
|
||||
|
||||
@ -268,8 +278,10 @@ static int mv_rtc_probe(struct platform_device *pdev)
|
||||
} else
|
||||
pdata->rtc = rtc_device_register(pdev->name, &pdev->dev,
|
||||
&mv_rtc_ops, THIS_MODULE);
|
||||
if (IS_ERR(pdata->rtc))
|
||||
return PTR_ERR(pdata->rtc);
|
||||
if (IS_ERR(pdata->rtc)) {
|
||||
ret = PTR_ERR(pdata->rtc);
|
||||
goto out;
|
||||
}
|
||||
|
||||
if (pdata->irq >= 0) {
|
||||
writel(0, pdata->ioaddr + RTC_ALARM_INTERRUPT_MASK_REG_OFFS);
|
||||
@ -282,6 +294,11 @@ static int mv_rtc_probe(struct platform_device *pdev)
|
||||
}
|
||||
|
||||
return 0;
|
||||
out:
|
||||
if (!IS_ERR(pdata->clk))
|
||||
clk_disable_unprepare(pdata->clk);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int __exit mv_rtc_remove(struct platform_device *pdev)
|
||||
@ -292,6 +309,9 @@ static int __exit mv_rtc_remove(struct platform_device *pdev)
|
||||
device_init_wakeup(&pdev->dev, 0);
|
||||
|
||||
rtc_device_unregister(pdata->rtc);
|
||||
if (!IS_ERR(pdata->clk))
|
||||
clk_disable_unprepare(pdata->clk);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
Loading…
Reference in New Issue
Block a user