Update libata driver for bf548 atapi controller against the 2.6.24 tree.

Changes:
1. Remove irq_ack() and port_disable() methods
2. Acocomodate for the libata-link patches
3. Change Kconfig ATAPI mode option into a module param.
4. Add supported WMDMA mode.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
This commit is contained in:
Sonic Zhang 2007-10-16 16:43:27 +08:00 committed by Jeff Garzik
parent 01839f6dde
commit 858c9c4066
2 changed files with 37 additions and 47 deletions

View File

@ -650,11 +650,4 @@ config PATA_BF54X
If unsure, say N.
config PATA_BF54X_DMA
bool "DMA mode"
depends on PATA_BF54X
default y
help
Enable DMA mode for Blackfin ATAPI controller.
endif # ATA

View File

@ -1092,14 +1092,15 @@ static unsigned int bfin_bus_softreset(struct ata_port *ap,
* Note: Original code is ata_std_softreset().
*/
static int bfin_std_softreset(struct ata_port *ap, unsigned int *classes,
static int bfin_std_softreset(struct ata_link *link, unsigned int *classes,
unsigned long deadline)
{
struct ata_port *ap = link->ap;
unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS;
unsigned int devmask = 0, err_mask;
u8 err;
if (ata_port_offline(ap)) {
if (ata_link_offline(link)) {
classes[0] = ATA_DEV_NONE;
goto out;
}
@ -1122,9 +1123,11 @@ static int bfin_std_softreset(struct ata_port *ap, unsigned int *classes,
}
/* determine by signature whether we have ATA or ATAPI devices */
classes[0] = ata_dev_try_classify(ap, 0, &err);
classes[0] = ata_dev_try_classify(&ap->link.device[0],
devmask & (1 << 0), &err);
if (slave_possible && err != 0x81)
classes[1] = ata_dev_try_classify(ap, 1, &err);
classes[1] = ata_dev_try_classify(&ap->link.device[1],
devmask & (1 << 1), &err);
out:
return 0;
@ -1167,7 +1170,7 @@ static unsigned char bfin_bmdma_status(struct ata_port *ap)
static void bfin_data_xfer(struct ata_device *adev, unsigned char *buf,
unsigned int buflen, int write_data)
{
struct ata_port *ap = adev->ap;
struct ata_port *ap = adev->link->ap;
unsigned int words = buflen >> 1;
unsigned short *buf16 = (u16 *) buf;
void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
@ -1206,7 +1209,10 @@ static void bfin_irq_clear(struct ata_port *ap)
void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
pr_debug("in atapi irq clear\n");
ATAPI_SET_INT_STATUS(base, 0x1FF);
ATAPI_SET_INT_STATUS(base, ATAPI_GET_INT_STATUS(base)|ATAPI_DEV_INT
| MULTI_DONE_INT | UDMAIN_DONE_INT | UDMAOUT_DONE_INT
| MULTI_TERM_INT | UDMAIN_TERM_INT | UDMAOUT_TERM_INT);
}
/**
@ -1233,33 +1239,6 @@ static unsigned char bfin_irq_on(struct ata_port *ap)
return tmp;
}
/**
* bfin_irq_ack - Acknowledge a device interrupt.
* @ap: Port on which interrupts are enabled.
*
* Note: Original code is ata_irq_ack().
*/
static unsigned char bfin_irq_ack(struct ata_port *ap, unsigned int chk_drq)
{
void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
unsigned int bits = chk_drq ? ATA_BUSY | ATA_DRQ : ATA_BUSY;
unsigned char status;
pr_debug("in atapi irq ack\n");
status = ata_busy_wait(ap, bits, 1000);
if (status & bits)
if (ata_msg_err(ap))
dev_err(ap->dev, "abnormal status 0x%X\n", status);
/* get controller status; clear intr, err bits */
ATAPI_SET_INT_STATUS(base, ATAPI_GET_INT_STATUS(base)|ATAPI_DEV_INT
| MULTI_DONE_INT | UDMAIN_DONE_INT | UDMAOUT_DONE_INT
| MULTI_TERM_INT | UDMAIN_TERM_INT | UDMAOUT_TERM_INT);
return bfin_bmdma_status(ap);
}
/**
* bfin_bmdma_freeze - Freeze DMA controller port
* @ap: port to freeze
@ -1308,8 +1287,9 @@ void bfin_bmdma_thaw(struct ata_port *ap)
* Note: Original code is ata_std_postreset().
*/
static void bfin_std_postreset(struct ata_port *ap, unsigned int *classes)
static void bfin_std_postreset(struct ata_link *link, unsigned int *classes)
{
struct ata_port *ap = link->ap;
void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
/* re-enable interrupts */
@ -1395,7 +1375,6 @@ static struct scsi_host_template bfin_sht = {
};
static const struct ata_port_operations bfin_pata_ops = {
.port_disable = ata_port_disable,
.set_piomode = bfin_set_piomode,
.set_dmamode = bfin_set_dmamode,
@ -1423,7 +1402,6 @@ static const struct ata_port_operations bfin_pata_ops = {
.irq_handler = ata_interrupt,
.irq_clear = bfin_irq_clear,
.irq_on = bfin_irq_on,
.irq_ack = bfin_irq_ack,
.port_start = bfin_port_start,
.port_stop = bfin_port_stop,
@ -1437,11 +1415,7 @@ static struct ata_port_info bfin_port_info[] = {
| ATA_FLAG_NO_LEGACY,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0,
#ifdef CONFIG_PATA_BF54X_DMA
.udma_mask = ATA_UDMA5,
#else
.udma_mask = 0,
#endif
.port_ops = &bfin_pata_ops,
},
};
@ -1607,9 +1581,25 @@ static struct platform_driver bfin_atapi_driver = {
},
};
#define ATAPI_MODE_SIZE 10
static char bfin_atapi_mode[ATAPI_MODE_SIZE];
static int __init bfin_atapi_init(void)
{
pr_info("register bfin atapi driver\n");
switch(bfin_atapi_mode[0]) {
case 'p':
case 'P':
break;
case 'm':
case 'M':
bfin_port_info[0].mwdma_mask = ATA_MWDMA2;
break;
default:
bfin_port_info[0].udma_mask = ATA_UDMA5;
};
return platform_driver_register(&bfin_atapi_driver);
}
@ -1620,6 +1610,13 @@ static void __exit bfin_atapi_exit(void)
module_init(bfin_atapi_init);
module_exit(bfin_atapi_exit);
/*
* ATAPI mode:
* pio/PIO
* udma/UDMA (default)
* mwdma/MWDMA
*/
module_param_string(bfin_atapi_mode, bfin_atapi_mode, ATAPI_MODE_SIZE, 0);
MODULE_AUTHOR("Sonic Zhang <sonic.zhang@analog.com>");
MODULE_DESCRIPTION("PATA driver for blackfin 54x ATAPI controller");