MIPS: Octeon PCIe: Make hardware and software bus numbers match.

Some SiliconImage PCIe SATA controlers are not detected when the bus
numbers differ.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This commit is contained in:
David Daney 2009-07-14 18:16:50 -07:00 committed by Ralf Baechle
parent 3e6e921831
commit 838c05705e

View File

@ -1040,19 +1040,29 @@ static inline int octeon_pcie_read_config(int pcie_port, struct pci_bus *bus,
int bus_number = bus->number;
/*
* We need to force the bus number to be zero on the root
* bus. Linux numbers the 2nd root bus to start after all
* buses on root 0.
* For the top level bus make sure our hardware bus number
* matches the software one.
*/
if (bus->parent == NULL)
bus_number = 0;
if (bus->parent == NULL) {
union cvmx_pciercx_cfg006 pciercx_cfg006;
pciercx_cfg006.u32 = cvmx_pcie_cfgx_read(pcie_port,
CVMX_PCIERCX_CFG006(pcie_port));
if (pciercx_cfg006.s.pbnum != bus_number) {
pciercx_cfg006.s.pbnum = bus_number;
pciercx_cfg006.s.sbnum = bus_number;
pciercx_cfg006.s.subbnum = bus_number;
cvmx_pcie_cfgx_write(pcie_port,
CVMX_PCIERCX_CFG006(pcie_port),
pciercx_cfg006.u32);
}
}
/*
* PCIe only has a single device connected to Octeon. It is
* always device ID 0. Don't bother doing reads for other
* device IDs on the first segment.
*/
if ((bus_number == 0) && (devfn >> 3 != 0))
if ((bus->parent == NULL) && (devfn >> 3 != 0))
return PCIBIOS_FUNC_NOT_SUPPORTED;
/*
@ -1070,7 +1080,7 @@ static inline int octeon_pcie_read_config(int pcie_port, struct pci_bus *bus,
* bridge only respondes to device ID 0, function
* 0-1
*/
if ((bus_number == 0) && (devfn >= 2))
if ((bus->parent == NULL) && (devfn >= 2))
return PCIBIOS_FUNC_NOT_SUPPORTED;
/*
* The PCI-X slots are device ID 2,3. Choose one of
@ -1167,13 +1177,6 @@ static inline int octeon_pcie_write_config(int pcie_port, struct pci_bus *bus,
int size, u32 val)
{
int bus_number = bus->number;
/*
* We need to force the bus number to be zero on the root
* bus. Linux numbers the 2nd root bus to start after all
* busses on root 0.
*/
if (bus->parent == NULL)
bus_number = 0;
switch (size) {
case 4: