V4L/DVB (11531): gspca - m5602-po1030: Clean up some comments

Signed-off-by: Erik Andr?n <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This commit is contained in:
Erik Andr?n 2009-01-15 03:40:01 -03:00 committed by Mauro Carvalho Chehab
parent 7ee4629092
commit 825f31b05b

View File

@ -219,7 +219,6 @@ static const unsigned char init_po1030[][3] =
static const unsigned char start_po1030[][3] =
{
/*sequence 4*/
{BRIDGE, M5602_XB_GPIO_DIR, 0x05},
{BRIDGE, M5602_XB_GPIO_DAT, 0x00},
{BRIDGE, M5602_XB_GPIO_EN_H, 0x06},
@ -253,7 +252,7 @@ static const unsigned char start_po1030[][3] =
{SENSOR, PO1030_OUTFORMCTRL2, PO1030_RAW_RGB_BAYER},
{SENSOR, PO1030_AUTOCTRL1, PO1030_WEIGHT_WIN_2X},
/* This makes no sense, hflip and vflp is located at bit 7, 6 */
{SENSOR, PO1030_CONTROL2, 0x03},
{SENSOR, 0x21, 0x90},
{SENSOR, PO1030_YTARGET, 0x60},
@ -269,8 +268,6 @@ static const unsigned char start_po1030[][3] =
{SENSOR, PO1030_CONTROL1, PO1030_SHUTTER_MODE |
PO1030_AUTO_SUBSAMPLING |
PO1030_FRAME_EQUAL},
{SENSOR, PO1030_GREEN_1_GAIN, 0x30},
{SENSOR, PO1030_GREEN_2_GAIN, 0x30},
{SENSOR, PO1030_GC0, 0x10},
{SENSOR, PO1030_GC1, 0x20},
{SENSOR, PO1030_GC2, 0x40},
@ -279,9 +276,7 @@ static const unsigned char start_po1030[][3] =
{SENSOR, PO1030_GC5, 0xa0},
{SENSOR, PO1030_GC6, 0xc0},
{SENSOR, PO1030_GC7, 0xff},
/*end of sequence 4*/
/*sequence 5*/
{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06},
{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
{BRIDGE, M5602_XB_ADC_CTRL, 0xc0},
@ -304,8 +299,6 @@ static const unsigned char start_po1030[][3] =
{BRIDGE, M5602_XB_HSYNC_PARA, 0x02},
{BRIDGE, M5602_XB_HSYNC_PARA, 0x7e},
{BRIDGE, M5602_XB_SIG_INI, 0x00},
/*end of sequence 5*/
/*sequence 6*/
/* with a very low lighted environment increase the exposure but
* decrease the FPS (Frame Per Second) */