forked from Minki/linux
Merge branch 'kirkwood/boards' of git://git.infradead.org/users/jcooper/linux into late/kirkwood
* 'kirkwood/boards' of git://git.infradead.org/users/jcooper/linux: ARM: Dove: allow PCI to be disabled ARM: dove: SolidRun CuBox DT ARM: dove: add device tree descriptors ARM: dove: add device tree based machine descriptor ARM: dove: add crypto engine ARM: dove: add clock gating control ARM: dove: unify clock setup ARM: initial DTS support for km_kirkwood arm: add documentation describing Marvell families of SoC ARM: kirkwood: DT descriptor for Seagate FreeAgent Dockstar ARM: kirkwood: DT board setup for Seagate FreeAgent Dockstar ARM: Kirkwood: Iomega ix2-200 DT support Context conflicts in arch/arm/Kconfig and arch/arm/mach-dove/common.c. The new device trees added to arch/arm/mach-kirkwood/Makefile.boot are kept and dealt with in a separate changeset, since moving them out to the new Makefile in this merge commit doesn't work well. Signed-off-by: Olof Johansson <olof@lixom.net>
This commit is contained in:
Olof Johansson
commit
80868a3691
232
Documentation/arm/Marvell/README
Normal file
232
Documentation/arm/Marvell/README
Normal file
@ -0,0 +1,232 @@
|
||||
ARM Marvell SoCs
|
||||
================
|
||||
|
||||
This document lists all the ARM Marvell SoCs that are currently
|
||||
supported in mainline by the Linux kernel. As the Marvell families of
|
||||
SoCs are large and complex, it is hard to understand where the support
|
||||
for a particular SoC is available in the Linux kernel. This document
|
||||
tries to help in understanding where those SoCs are supported, and to
|
||||
match them with their corresponding public datasheet, when available.
|
||||
|
||||
Orion family
|
||||
------------
|
||||
|
||||
Flavors:
|
||||
88F5082
|
||||
88F5181
|
||||
88F5181L
|
||||
88F5182
|
||||
Datasheet : http://www.embeddedarm.com/documentation/third-party/MV88F5182-datasheet.pdf
|
||||
Programmer's User Guide : http://www.embeddedarm.com/documentation/third-party/MV88F5182-opensource-manual.pdf
|
||||
User Manual : http://www.embeddedarm.com/documentation/third-party/MV88F5182-usermanual.pdf
|
||||
88F5281
|
||||
Datasheet : http://www.ocmodshop.com/images/reviews/networking/qnap_ts409u/marvel_88f5281_data_sheet.pdf
|
||||
88F6183
|
||||
Core: Feroceon ARMv5 compatible
|
||||
Linux kernel mach directory: arch/arm/mach-orion5x
|
||||
Linux kernel plat directory: arch/arm/plat-orion
|
||||
|
||||
Kirkwood family
|
||||
---------------
|
||||
|
||||
Flavors:
|
||||
88F6282 a.k.a Armada 300
|
||||
Product Brief : http://www.marvell.com/embedded-processors/armada-300/assets/armada_310.pdf
|
||||
88F6283 a.k.a Armada 310
|
||||
Product Brief : http://www.marvell.com/embedded-processors/armada-300/assets/armada_310.pdf
|
||||
88F6190
|
||||
Product Brief : http://www.marvell.com/embedded-processors/kirkwood/assets/88F6190-003_WEB.pdf
|
||||
Hardware Spec : http://www.marvell.com/embedded-processors/kirkwood/assets/HW_88F619x_OpenSource.pdf
|
||||
Functional Spec: http://www.marvell.com/embedded-processors/kirkwood/assets/FS_88F6180_9x_6281_OpenSource.pdf
|
||||
88F6192
|
||||
Product Brief : http://www.marvell.com/embedded-processors/kirkwood/assets/88F6192-003_ver1.pdf
|
||||
Hardware Spec : http://www.marvell.com/embedded-processors/kirkwood/assets/HW_88F619x_OpenSource.pdf
|
||||
Functional Spec: http://www.marvell.com/embedded-processors/kirkwood/assets/FS_88F6180_9x_6281_OpenSource.pdf
|
||||
88F6182
|
||||
88F6180
|
||||
Product Brief : http://www.marvell.com/embedded-processors/kirkwood/assets/88F6180-003_ver1.pdf
|
||||
Hardware Spec : http://www.marvell.com/embedded-processors/kirkwood/assets/HW_88F6180_OpenSource.pdf
|
||||
Functional Spec: http://www.marvell.com/embedded-processors/kirkwood/assets/FS_88F6180_9x_6281_OpenSource.pdf
|
||||
88F6281
|
||||
Product Brief : http://www.marvell.com/embedded-processors/kirkwood/assets/88F6281-004_ver1.pdf
|
||||
Hardware Spec : http://www.marvell.com/embedded-processors/kirkwood/assets/HW_88F6281_OpenSource.pdf
|
||||
Functional Spec: http://www.marvell.com/embedded-processors/kirkwood/assets/FS_88F6180_9x_6281_OpenSource.pdf
|
||||
Homepage: http://www.marvell.com/embedded-processors/kirkwood/
|
||||
Core: Feroceon ARMv5 compatible
|
||||
Linux kernel mach directory: arch/arm/mach-kirkwood
|
||||
Linux kernel plat directory: arch/arm/plat-orion
|
||||
|
||||
Discovery family
|
||||
----------------
|
||||
|
||||
Flavors:
|
||||
MV78100
|
||||
Product Brief : http://www.marvell.com/embedded-processors/discovery-innovation/assets/MV78100-003_WEB.pdf
|
||||
Hardware Spec : http://www.marvell.com/embedded-processors/discovery-innovation/assets/HW_MV78100_OpenSource.pdf
|
||||
Functional Spec: http://www.marvell.com/embedded-processors/discovery-innovation/assets/FS_MV76100_78100_78200_OpenSource.pdf
|
||||
MV78200
|
||||
Product Brief : http://www.marvell.com/embedded-processors/discovery-innovation/assets/MV78200-002_WEB.pdf
|
||||
Hardware Spec : http://www.marvell.com/embedded-processors/discovery-innovation/assets/HW_MV78200_OpenSource.pdf
|
||||
Functional Spec: http://www.marvell.com/embedded-processors/discovery-innovation/assets/FS_MV76100_78100_78200_OpenSource.pdf
|
||||
MV76100
|
||||
Not supported by the Linux kernel.
|
||||
|
||||
Core: Feroceon ARMv5 compatible
|
||||
|
||||
Linux kernel mach directory: arch/arm/mach-mv78xx0
|
||||
Linux kernel plat directory: arch/arm/plat-orion
|
||||
|
||||
EBU Armada family
|
||||
-----------------
|
||||
|
||||
Armada 370 Flavors:
|
||||
88F6710
|
||||
88F6707
|
||||
88F6W11
|
||||
|
||||
Armada XP Flavors:
|
||||
MV78230
|
||||
MV78260
|
||||
MV78460
|
||||
|
||||
Product Brief: http://www.marvell.com/embedded-processors/armada-xp/assets/Marvell-ArmadaXP-SoC-product%20brief.pdf
|
||||
No public datasheet available.
|
||||
|
||||
Core: Sheeva ARMv7 compatible
|
||||
|
||||
Linux kernel mach directory: arch/arm/mach-mvebu
|
||||
Linux kernel plat directory: none
|
||||
|
||||
Avanta family
|
||||
-------------
|
||||
|
||||
Flavors:
|
||||
88F6510
|
||||
88F6530P
|
||||
88F6550
|
||||
88F6560
|
||||
Homepage : http://www.marvell.com/broadband/
|
||||
Product Brief: http://www.marvell.com/broadband/assets/Marvell_Avanta_88F6510_305_060-001_product_brief.pdf
|
||||
No public datasheet available.
|
||||
|
||||
Core: ARMv5 compatible
|
||||
|
||||
Linux kernel mach directory: no code in mainline yet, planned for the future
|
||||
Linux kernel plat directory: no code in mainline yet, planned for the future
|
||||
|
||||
Dove family (application processor)
|
||||
-----------------------------------
|
||||
|
||||
Flavors:
|
||||
88AP510 a.k.a Armada 510
|
||||
Product Brief : http://www.marvell.com/application-processors/armada-500/assets/Marvell_Armada510_SoC.pdf
|
||||
Hardware Spec : http://www.marvell.com/application-processors/armada-500/assets/Armada-510-Hardware-Spec.pdf
|
||||
Functional Spec : http://www.marvell.com/application-processors/armada-500/assets/Armada-510-Functional-Spec.pdf
|
||||
Homepage: http://www.marvell.com/application-processors/armada-500/
|
||||
Core: ARMv7 compatible
|
||||
Directory: arch/arm/mach-dove
|
||||
|
||||
PXA 2xx/3xx/93x/95x family
|
||||
--------------------------
|
||||
|
||||
Flavors:
|
||||
PXA21x, PXA25x, PXA26x
|
||||
Application processor only
|
||||
Core: ARMv5 XScale core
|
||||
PXA270, PXA271, PXA272
|
||||
Product Brief : http://www.marvell.com/application-processors/pxa-family/assets/pxa_27x_pb.pdf
|
||||
Design guide : http://www.marvell.com/application-processors/pxa-family/assets/pxa_27x_design_guide.pdf
|
||||
Developers manual : http://www.marvell.com/application-processors/pxa-family/assets/pxa_27x_dev_man.pdf
|
||||
Specification : http://www.marvell.com/application-processors/pxa-family/assets/pxa_27x_emts.pdf
|
||||
Specification update : http://www.marvell.com/application-processors/pxa-family/assets/pxa_27x_spec_update.pdf
|
||||
Application processor only
|
||||
Core: ARMv5 XScale core
|
||||
PXA300, PXA310, PXA320
|
||||
PXA 300 Product Brief : http://www.marvell.com/application-processors/pxa-family/assets/PXA300_PB_R4.pdf
|
||||
PXA 310 Product Brief : http://www.marvell.com/application-processors/pxa-family/assets/PXA310_PB_R4.pdf
|
||||
PXA 320 Product Brief : http://www.marvell.com/application-processors/pxa-family/assets/PXA320_PB_R4.pdf
|
||||
Design guide : http://www.marvell.com/application-processors/pxa-family/assets/PXA3xx_Design_Guide.pdf
|
||||
Developers manual : http://www.marvell.com/application-processors/pxa-family/assets/PXA3xx_Developers_Manual.zip
|
||||
Specifications : http://www.marvell.com/application-processors/pxa-family/assets/PXA3xx_EMTS.pdf
|
||||
Specification Update : http://www.marvell.com/application-processors/pxa-family/assets/PXA3xx_Spec_Update.zip
|
||||
Reference Manual : http://www.marvell.com/application-processors/pxa-family/assets/PXA3xx_TavorP_BootROM_Ref_Manual.pdf
|
||||
Application processor only
|
||||
Core: ARMv5 XScale core
|
||||
PXA930, PXA935
|
||||
Application processor with Communication processor
|
||||
Core: ARMv5 XScale core
|
||||
PXA955
|
||||
Application processor with Communication processor
|
||||
Core: ARMv7 compatible Sheeva PJ4 core
|
||||
|
||||
Comments:
|
||||
|
||||
* This line of SoCs originates from the XScale family developed by
|
||||
Intel and acquired by Marvell in ~2006. The PXA21x, PXA25x,
|
||||
PXA26x, PXA27x, PXA3xx and PXA93x were developed by Intel, while
|
||||
the later PXA95x were developed by Marvell.
|
||||
|
||||
* Due to their XScale origin, these SoCs have virtually nothing in
|
||||
common with the other (Kirkwood, Dove, etc.) families of Marvell
|
||||
SoCs, except with the MMP/MMP2 family of SoCs.
|
||||
|
||||
Linux kernel mach directory: arch/arm/mach-pxa
|
||||
Linux kernel plat directory: arch/arm/plat-pxa
|
||||
|
||||
MMP/MMP2 family (communication processor)
|
||||
-----------------------------------------
|
||||
|
||||
Flavors:
|
||||
PXA168, a.k.a Armada 168
|
||||
Homepage : http://www.marvell.com/application-processors/armada-100/armada-168.jsp
|
||||
Product brief : http://www.marvell.com/application-processors/armada-100/assets/pxa_168_pb.pdf
|
||||
Hardware manual : http://www.marvell.com/application-processors/armada-100/assets/armada_16x_datasheet.pdf
|
||||
Software manual : http://www.marvell.com/application-processors/armada-100/assets/armada_16x_software_manual.pdf
|
||||
Specification update : http://www.marvell.com/application-processors/armada-100/assets/ARMADA16x_Spec_update.pdf
|
||||
Boot ROM manual : http://www.marvell.com/application-processors/armada-100/assets/armada_16x_ref_manual.pdf
|
||||
App node package : http://www.marvell.com/application-processors/armada-100/assets/armada_16x_app_note_package.pdf
|
||||
Application processor only
|
||||
Core: ARMv5 compatible Marvell PJ1 (Mohawk)
|
||||
PXA910
|
||||
Homepage : http://www.marvell.com/communication-processors/pxa910/
|
||||
Product Brief : http://www.marvell.com/communication-processors/pxa910/assets/Marvell_PXA910_Platform-001_PB_final.pdf
|
||||
Application processor with Communication processor
|
||||
Core: ARMv5 compatible Marvell PJ1 (Mohawk)
|
||||
MMP2, a.k.a Armada 610
|
||||
Product Brief : http://www.marvell.com/application-processors/armada-600/assets/armada610_pb.pdf
|
||||
Application processor only
|
||||
Core: ARMv7 compatible Sheeva PJ4 core
|
||||
|
||||
Comments:
|
||||
|
||||
* This line of SoCs originates from the XScale family developed by
|
||||
Intel and acquired by Marvell in ~2006. All the processors of
|
||||
this MMP/MMP2 family were developed by Marvell.
|
||||
|
||||
* Due to their XScale origin, these SoCs have virtually nothing in
|
||||
common with the other (Kirkwood, Dove, etc.) families of Marvell
|
||||
SoCs, except with the PXA family of SoCs listed above.
|
||||
|
||||
Linux kernel mach directory: arch/arm/mach-mmp
|
||||
Linux kernel plat directory: arch/arm/plat-pxa
|
||||
|
||||
Long-term plans
|
||||
---------------
|
||||
|
||||
* Unify the mach-dove/, mach-mv78xx0/, mach-orion5x/ and
|
||||
mach-kirkwood/ into the mach-mvebu/ to support all SoCs from the
|
||||
Marvell EBU (Engineering Business Unit) in a single mach-<foo>
|
||||
directory. The plat-orion/ would therefore disappear.
|
||||
|
||||
* Unify the mach-mmp/ and mach-pxa/ into the same mach-pxa
|
||||
directory. The plat-pxa/ would therefore disappear.
|
||||
|
||||
Credits
|
||||
-------
|
||||
|
||||
Maen Suleiman <maen@marvell.com>
|
||||
Lior Amsalem <alior@marvell.com>
|
||||
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
|
||||
Andrew Lunn <andrew@lunn.ch>
|
||||
Nicolas Pitre <nico@fluxnic.net>
|
||||
Eric Miao <eric.y.miao@gmail.com>
|
||||
@ -537,10 +537,11 @@ config ARCH_IXP4XX
|
||||
config ARCH_DOVE
|
||||
bool "Marvell Dove"
|
||||
select CPU_V7
|
||||
select PCI
|
||||
select ARCH_REQUIRE_GPIOLIB
|
||||
select GENERIC_CLOCKEVENTS
|
||||
select MIGHT_HAVE_PCI
|
||||
select PLAT_ORION
|
||||
select USB_ARCH_HAS_EHCI
|
||||
help
|
||||
Support for the Marvell Dove SoC 88AP510
|
||||
|
||||
|
||||
38
arch/arm/boot/dts/dove-cm-a510.dts
Normal file
38
arch/arm/boot/dts/dove-cm-a510.dts
Normal file
@ -0,0 +1,38 @@
|
||||
/dts-v1/;
|
||||
|
||||
/include/ "dove.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Compulab CM-A510";
|
||||
compatible = "compulab,cm-a510", "marvell,dove";
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x00000000 0x40000000>;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200n8 earlyprintk";
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 { status = "okay"; };
|
||||
&uart1 { status = "okay"; };
|
||||
&sdio0 { status = "okay"; };
|
||||
&sdio1 { status = "okay"; };
|
||||
&sata0 { status = "okay"; };
|
||||
|
||||
&spi0 {
|
||||
status = "okay";
|
||||
|
||||
/* spi0.0: 4M Flash Winbond W25Q32BV */
|
||||
spi-flash@0 {
|
||||
compatible = "st,w25q32";
|
||||
spi-max-frequency = <20000000>;
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
};
|
||||
42
arch/arm/boot/dts/dove-cubox.dts
Normal file
42
arch/arm/boot/dts/dove-cubox.dts
Normal file
@ -0,0 +1,42 @@
|
||||
/dts-v1/;
|
||||
|
||||
/include/ "dove.dtsi"
|
||||
|
||||
/ {
|
||||
model = "SolidRun CuBox";
|
||||
compatible = "solidrun,cubox", "marvell,dove";
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x00000000 0x40000000>;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200n8 earlyprintk";
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
power {
|
||||
label = "Power";
|
||||
gpios = <&gpio0 18 1>;
|
||||
linux,default-trigger = "default-on";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 { status = "okay"; };
|
||||
&sdio0 { status = "okay"; };
|
||||
&sata0 { status = "okay"; };
|
||||
&i2c0 { status = "okay"; };
|
||||
|
||||
&spi0 {
|
||||
status = "okay";
|
||||
|
||||
/* spi0.0: 4M Flash Winbond W25Q32BV */
|
||||
spi-flash@0 {
|
||||
compatible = "st,w25q32";
|
||||
spi-max-frequency = <20000000>;
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
38
arch/arm/boot/dts/dove-dove-db.dts
Normal file
38
arch/arm/boot/dts/dove-dove-db.dts
Normal file
@ -0,0 +1,38 @@
|
||||
/dts-v1/;
|
||||
|
||||
/include/ "dove.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Marvell DB-MV88AP510-BP Development Board";
|
||||
compatible = "marvell,dove-db", "marvell,dove";
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x00000000 0x40000000>;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200n8 earlyprintk";
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 { status = "okay"; };
|
||||
&uart1 { status = "okay"; };
|
||||
&sdio0 { status = "okay"; };
|
||||
&sdio1 { status = "okay"; };
|
||||
&sata0 { status = "okay"; };
|
||||
|
||||
&spi0 {
|
||||
status = "okay";
|
||||
|
||||
/* spi0.0: 4M Flash ST-M25P32-VMF6P */
|
||||
spi-flash@0 {
|
||||
compatible = "st,m25p32";
|
||||
spi-max-frequency = <20000000>;
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
};
|
||||
143
arch/arm/boot/dts/dove.dtsi
Normal file
143
arch/arm/boot/dts/dove.dtsi
Normal file
@ -0,0 +1,143 @@
|
||||
/include/ "skeleton.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "marvell,dove";
|
||||
model = "Marvell Armada 88AP510 SoC";
|
||||
|
||||
interrupt-parent = <&intc>;
|
||||
|
||||
intc: interrupt-controller {
|
||||
compatible = "marvell,orion-intc";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
reg = <0xf1020204 0x04>,
|
||||
<0xf1020214 0x04>;
|
||||
};
|
||||
|
||||
mbus@f1000000 {
|
||||
compatible = "simple-bus";
|
||||
ranges = <0 0xf1000000 0x4000000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
uart0: serial@12000 {
|
||||
compatible = "ns16550a";
|
||||
reg = <0x12000 0x100>;
|
||||
reg-shift = <2>;
|
||||
interrupts = <7>;
|
||||
clock-frequency = <166666667>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
uart1: serial@12100 {
|
||||
compatible = "ns16550a";
|
||||
reg = <0x12100 0x100>;
|
||||
reg-shift = <2>;
|
||||
interrupts = <8>;
|
||||
clock-frequency = <166666667>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
uart2: serial@12200 {
|
||||
compatible = "ns16550a";
|
||||
reg = <0x12000 0x100>;
|
||||
reg-shift = <2>;
|
||||
interrupts = <9>;
|
||||
clock-frequency = <166666667>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
uart3: serial@12300 {
|
||||
compatible = "ns16550a";
|
||||
reg = <0x12100 0x100>;
|
||||
reg-shift = <2>;
|
||||
interrupts = <10>;
|
||||
clock-frequency = <166666667>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
wdt: wdt@20300 {
|
||||
compatible = "marvell,orion-wdt";
|
||||
reg = <0x20300 0x28>;
|
||||
};
|
||||
|
||||
gpio0: gpio@d0400 {
|
||||
compatible = "marvell,orion-gpio";
|
||||
#gpio-cells = <2>;
|
||||
gpio-controller;
|
||||
reg = <0xd0400 0x20>;
|
||||
ngpio = <32>;
|
||||
interrupts = <12>, <13>, <14>, <60>;
|
||||
};
|
||||
|
||||
gpio1: gpio@d0420 {
|
||||
compatible = "marvell,orion-gpio";
|
||||
#gpio-cells = <2>;
|
||||
gpio-controller;
|
||||
reg = <0xd0420 0x20>;
|
||||
ngpio = <32>;
|
||||
interrupts = <61>;
|
||||
};
|
||||
|
||||
gpio2: gpio@e8400 {
|
||||
compatible = "marvell,orion-gpio";
|
||||
#gpio-cells = <2>;
|
||||
gpio-controller;
|
||||
reg = <0xe8400 0x0c>;
|
||||
ngpio = <8>;
|
||||
};
|
||||
|
||||
spi0: spi@10600 {
|
||||
compatible = "marvell,orion-spi";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
cell-index = <0>;
|
||||
interrupts = <6>;
|
||||
reg = <0x10600 0x28>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
spi1: spi@14600 {
|
||||
compatible = "marvell,orion-spi";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
cell-index = <1>;
|
||||
interrupts = <5>;
|
||||
reg = <0x14600 0x28>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c0: i2c@11000 {
|
||||
compatible = "marvell,mv64xxx-i2c";
|
||||
reg = <0x11000 0x20>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupts = <11>;
|
||||
clock-frequency = <400000>;
|
||||
timeout-ms = <1000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sdio0: sdio@92000 {
|
||||
compatible = "marvell,dove-sdhci";
|
||||
reg = <0x92000 0x100>;
|
||||
interrupts = <35>, <37>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sdio1: sdio@90000 {
|
||||
compatible = "marvell,dove-sdhci";
|
||||
reg = <0x90000 0x100>;
|
||||
interrupts = <36>, <38>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sata0: sata@a0000 {
|
||||
compatible = "marvell,orion-sata";
|
||||
reg = <0xa0000 0x2400>;
|
||||
interrupts = <62>;
|
||||
nr-ports = <1>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
};
|
||||
57
arch/arm/boot/dts/kirkwood-dockstar.dts
Normal file
57
arch/arm/boot/dts/kirkwood-dockstar.dts
Normal file
@ -0,0 +1,57 @@
|
||||
/dts-v1/;
|
||||
|
||||
/include/ "kirkwood.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Seagate FreeAgent Dockstar";
|
||||
compatible = "seagate,dockstar", "marvell,kirkwood-88f6281", "marvell,kirkwood";
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x00000000 0x8000000>;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
|
||||
};
|
||||
|
||||
ocp@f1000000 {
|
||||
serial@12000 {
|
||||
clock-frequency = <200000000>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
nand@3000000 {
|
||||
status = "okay";
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0000000 0x100000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
label = "uImage";
|
||||
reg = <0x0100000 0x400000>;
|
||||
};
|
||||
|
||||
partition@500000 {
|
||||
label = "data";
|
||||
reg = <0x0500000 0xfb00000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
health {
|
||||
label = "status:green:health";
|
||||
gpios = <&gpio1 14 1>;
|
||||
linux,default-trigger = "default-on";
|
||||
};
|
||||
fault {
|
||||
label = "status:orange:fault";
|
||||
gpios = <&gpio1 15 1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
105
arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
Normal file
105
arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
Normal file
@ -0,0 +1,105 @@
|
||||
/dts-v1/;
|
||||
|
||||
/include/ "kirkwood.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Iomega StorCenter ix2-200";
|
||||
compatible = "iom,ix2-200", "marvell,kirkwood-88f6281", "marvell,kirkwood";
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x00000000 0x10000000>;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200n8 earlyprintk";
|
||||
};
|
||||
|
||||
ocp@f1000000 {
|
||||
i2c@11000 {
|
||||
status = "okay";
|
||||
|
||||
lm63: lm63@4c {
|
||||
compatible = "national,lm63";
|
||||
reg = <0x4c>;
|
||||
};
|
||||
};
|
||||
|
||||
serial@12000 {
|
||||
clock-frequency = <200000000>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
nand@3000000 {
|
||||
status = "okay";
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0000000 0x100000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@a0000 {
|
||||
label = "env";
|
||||
reg = <0xa0000 0x20000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
label = "uImage";
|
||||
reg = <0x100000 0x300000>;
|
||||
};
|
||||
|
||||
partition@400000 {
|
||||
label = "uInitrd";
|
||||
reg = <0x540000 0x1000000>;
|
||||
};
|
||||
};
|
||||
sata@80000 {
|
||||
status = "okay";
|
||||
nr-ports = <2>;
|
||||
};
|
||||
|
||||
};
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
power_led {
|
||||
label = "status:white:power_led";
|
||||
gpios = <&gpio0 16 0>;
|
||||
linux,default-trigger = "default-on";
|
||||
};
|
||||
health_led1 {
|
||||
label = "status:red:health_led";
|
||||
gpios = <&gpio1 5 0>;
|
||||
};
|
||||
health_led2 {
|
||||
label = "status:white:health_led";
|
||||
gpios = <&gpio1 4 0>;
|
||||
};
|
||||
backup_led {
|
||||
label = "status:blue:backup_led";
|
||||
gpios = <&gpio0 15 0>;
|
||||
};
|
||||
};
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
Power {
|
||||
label = "Power Button";
|
||||
linux,code = <116>;
|
||||
gpios = <&gpio0 14 1>;
|
||||
};
|
||||
Reset {
|
||||
label = "Reset Button";
|
||||
linux,code = <0x198>;
|
||||
gpios = <&gpio0 12 1>;
|
||||
};
|
||||
OTB {
|
||||
label = "OTB Button";
|
||||
linux,code = <133>;
|
||||
gpios = <&gpio1 3 1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
29
arch/arm/boot/dts/kirkwood-km_kirkwood.dts
Normal file
29
arch/arm/boot/dts/kirkwood-km_kirkwood.dts
Normal file
@ -0,0 +1,29 @@
|
||||
/dts-v1/;
|
||||
|
||||
/include/ "kirkwood.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Keymile Kirkwood Reference Design";
|
||||
compatible = "keymile,km_kirkwood", "marvell,kirkwood-98DX4122", "marvell,kirkwood";
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x00000000 0x08000000>;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200n8 earlyprintk";
|
||||
};
|
||||
|
||||
ocp@f1000000 {
|
||||
serial@12000 {
|
||||
clock-frequency = <200000000>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
nand@3000000 {
|
||||
status = "ok";
|
||||
chip-delay = <25>;
|
||||
};
|
||||
};
|
||||
};
|
||||
@ -15,6 +15,13 @@ config MACH_CM_A510
|
||||
Say 'Y' here if you want your kernel to support the
|
||||
CompuLab CM-A510 Board.
|
||||
|
||||
config MACH_DOVE_DT
|
||||
bool "Marvell Dove Flattened Device Tree"
|
||||
select USE_OF
|
||||
help
|
||||
Say 'Y' here if you want your kernel to support the
|
||||
Marvell Dove using flattened device tree.
|
||||
|
||||
endmenu
|
||||
|
||||
endif
|
||||
|
||||
@ -1,4 +1,4 @@
|
||||
obj-y += common.o addr-map.o irq.o pcie.o mpp.o
|
||||
|
||||
obj-y += common.o addr-map.o irq.o mpp.o
|
||||
obj-$(CONFIG_PCI) += pcie.o
|
||||
obj-$(CONFIG_MACH_DOVE_DB) += dove-db-setup.o
|
||||
obj-$(CONFIG_MACH_CM_A510) += cm-a510.o
|
||||
|
||||
@ -1,3 +1,7 @@
|
||||
zreladdr-y += 0x00008000
|
||||
params_phys-y := 0x00000100
|
||||
initrd_phys-y := 0x00800000
|
||||
|
||||
dtb-$(CONFIG_MACH_DOVE_DT) += dove-dove-db.dtb
|
||||
dtb-$(CONFIG_MACH_DOVE_DT) += dove-cm-a510.dtb
|
||||
dtb-$(CONFIG_MACH_DOVE_DT) += dove-cubox.dtb
|
||||
|
||||
@ -16,6 +16,8 @@
|
||||
#include <linux/clk-provider.h>
|
||||
#include <linux/ata_platform.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/of_platform.h>
|
||||
#include <asm/page.h>
|
||||
#include <asm/setup.h>
|
||||
#include <asm/timex.h>
|
||||
@ -24,6 +26,7 @@
|
||||
#include <asm/mach/time.h>
|
||||
#include <asm/mach/pci.h>
|
||||
#include <mach/dove.h>
|
||||
#include <mach/pm.h>
|
||||
#include <mach/bridge-regs.h>
|
||||
#include <asm/mach/arch.h>
|
||||
#include <linux/irq.h>
|
||||
@ -33,8 +36,6 @@
|
||||
#include <plat/addr-map.h>
|
||||
#include "common.h"
|
||||
|
||||
static int get_tclk(void);
|
||||
|
||||
/*****************************************************************************
|
||||
* I/O Address Mapping
|
||||
****************************************************************************/
|
||||
@ -60,14 +61,69 @@ void __init dove_map_io(void)
|
||||
/*****************************************************************************
|
||||
* CLK tree
|
||||
****************************************************************************/
|
||||
static int dove_tclk;
|
||||
|
||||
static DEFINE_SPINLOCK(gating_lock);
|
||||
static struct clk *tclk;
|
||||
|
||||
static void __init clk_init(void)
|
||||
static struct clk __init *dove_register_gate(const char *name,
|
||||
const char *parent, u8 bit_idx)
|
||||
{
|
||||
tclk = clk_register_fixed_rate(NULL, "tclk", NULL, CLK_IS_ROOT,
|
||||
get_tclk());
|
||||
return clk_register_gate(NULL, name, parent, 0,
|
||||
(void __iomem *)CLOCK_GATING_CONTROL,
|
||||
bit_idx, 0, &gating_lock);
|
||||
}
|
||||
|
||||
orion_clkdev_init(tclk);
|
||||
static void __init dove_clk_init(void)
|
||||
{
|
||||
struct clk *usb0, *usb1, *sata, *pex0, *pex1, *sdio0, *sdio1;
|
||||
struct clk *nand, *camera, *i2s0, *i2s1, *crypto, *ac97, *pdma;
|
||||
struct clk *xor0, *xor1, *ge, *gephy;
|
||||
|
||||
tclk = clk_register_fixed_rate(NULL, "tclk", NULL, CLK_IS_ROOT,
|
||||
dove_tclk);
|
||||
|
||||
usb0 = dove_register_gate("usb0", "tclk", CLOCK_GATING_BIT_USB0);
|
||||
usb1 = dove_register_gate("usb1", "tclk", CLOCK_GATING_BIT_USB1);
|
||||
sata = dove_register_gate("sata", "tclk", CLOCK_GATING_BIT_SATA);
|
||||
pex0 = dove_register_gate("pex0", "tclk", CLOCK_GATING_BIT_PCIE0);
|
||||
pex1 = dove_register_gate("pex1", "tclk", CLOCK_GATING_BIT_PCIE1);
|
||||
sdio0 = dove_register_gate("sdio0", "tclk", CLOCK_GATING_BIT_SDIO0);
|
||||
sdio1 = dove_register_gate("sdio1", "tclk", CLOCK_GATING_BIT_SDIO1);
|
||||
nand = dove_register_gate("nand", "tclk", CLOCK_GATING_BIT_NAND);
|
||||
camera = dove_register_gate("camera", "tclk", CLOCK_GATING_BIT_CAMERA);
|
||||
i2s0 = dove_register_gate("i2s0", "tclk", CLOCK_GATING_BIT_I2S0);
|
||||
i2s1 = dove_register_gate("i2s1", "tclk", CLOCK_GATING_BIT_I2S1);
|
||||
crypto = dove_register_gate("crypto", "tclk", CLOCK_GATING_BIT_CRYPTO);
|
||||
ac97 = dove_register_gate("ac97", "tclk", CLOCK_GATING_BIT_AC97);
|
||||
pdma = dove_register_gate("pdma", "tclk", CLOCK_GATING_BIT_PDMA);
|
||||
xor0 = dove_register_gate("xor0", "tclk", CLOCK_GATING_BIT_XOR0);
|
||||
xor1 = dove_register_gate("xor1", "tclk", CLOCK_GATING_BIT_XOR1);
|
||||
gephy = dove_register_gate("gephy", "tclk", CLOCK_GATING_BIT_GIGA_PHY);
|
||||
ge = dove_register_gate("ge", "gephy", CLOCK_GATING_BIT_GBE);
|
||||
|
||||
orion_clkdev_add(NULL, "orion_spi.0", tclk);
|
||||
orion_clkdev_add(NULL, "orion_spi.1", tclk);
|
||||
orion_clkdev_add(NULL, "orion_wdt", tclk);
|
||||
orion_clkdev_add(NULL, "mv64xxx_i2c.0", tclk);
|
||||
|
||||
orion_clkdev_add(NULL, "orion-ehci.0", usb0);
|
||||
orion_clkdev_add(NULL, "orion-ehci.1", usb1);
|
||||
orion_clkdev_add(NULL, "mv643xx_eth.0", ge);
|
||||
orion_clkdev_add("0", "sata_mv.0", sata);
|
||||
orion_clkdev_add("0", "pcie", pex0);
|
||||
orion_clkdev_add("1", "pcie", pex1);
|
||||
orion_clkdev_add(NULL, "sdhci-dove.0", sdio0);
|
||||
orion_clkdev_add(NULL, "sdhci-dove.1", sdio1);
|
||||
orion_clkdev_add(NULL, "orion_nand", nand);
|
||||
orion_clkdev_add(NULL, "cafe1000-ccic.0", camera);
|
||||
orion_clkdev_add(NULL, "kirkwood-i2s.0", i2s0);
|
||||
orion_clkdev_add(NULL, "kirkwood-i2s.1", i2s1);
|
||||
orion_clkdev_add(NULL, "mv_crypto", crypto);
|
||||
orion_clkdev_add(NULL, "dove-ac97", ac97);
|
||||
orion_clkdev_add(NULL, "dove-pdma", pdma);
|
||||
orion_clkdev_add(NULL, "mv_xor_shared.0", xor0);
|
||||
orion_clkdev_add(NULL, "mv_xor_shared.1", xor1);
|
||||
}
|
||||
|
||||
/*****************************************************************************
|
||||
@ -178,22 +234,31 @@ void __init dove_init_early(void)
|
||||
orion_time_set_base(TIMER_VIRT_BASE);
|
||||
}
|
||||
|
||||
static int get_tclk(void)
|
||||
static int __init dove_find_tclk(void)
|
||||
{
|
||||
/* use DOVE_RESET_SAMPLE_HI/LO to detect tclk */
|
||||
return 166666667;
|
||||
}
|
||||
|
||||
static void __init dove_timer_init(void)
|
||||
{
|
||||
dove_tclk = dove_find_tclk();
|
||||
orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR,
|
||||
IRQ_DOVE_BRIDGE, get_tclk());
|
||||
IRQ_DOVE_BRIDGE, dove_tclk);
|
||||
}
|
||||
|
||||
struct sys_timer dove_timer = {
|
||||
.init = dove_timer_init,
|
||||
};
|
||||
|
||||
/*****************************************************************************
|
||||
* Cryptographic Engines and Security Accelerator (CESA)
|
||||
****************************************************************************/
|
||||
void __init dove_crypto_init(void)
|
||||
{
|
||||
orion_crypto_init(DOVE_CRYPT_PHYS_BASE, DOVE_CESA_PHYS_BASE,
|
||||
DOVE_CESA_SIZE, IRQ_DOVE_CRYPTO);
|
||||
}
|
||||
|
||||
/*****************************************************************************
|
||||
* XOR 0
|
||||
****************************************************************************/
|
||||
@ -275,8 +340,8 @@ void __init dove_sdio1_init(void)
|
||||
|
||||
void __init dove_init(void)
|
||||
{
|
||||
printk(KERN_INFO "Dove 88AP510 SoC, ");
|
||||
printk(KERN_INFO "TCLK = %dMHz\n", (get_tclk() + 499999) / 1000000);
|
||||
pr_info("Dove 88AP510 SoC, TCLK = %d MHz.\n",
|
||||
(dove_tclk + 499999) / 1000000);
|
||||
|
||||
#ifdef CONFIG_CACHE_TAUROS2
|
||||
tauros2_init(0);
|
||||
@ -284,7 +349,7 @@ void __init dove_init(void)
|
||||
dove_setup_cpu_mbus();
|
||||
|
||||
/* Setup root of clk tree */
|
||||
clk_init();
|
||||
dove_clk_init();
|
||||
|
||||
/* internal devices that every board has */
|
||||
dove_rtc_init();
|
||||
@ -307,3 +372,67 @@ void dove_restart(char mode, const char *cmd)
|
||||
while (1)
|
||||
;
|
||||
}
|
||||
|
||||
#if defined(CONFIG_MACH_DOVE_DT)
|
||||
/*
|
||||
* Auxdata required until real OF clock provider
|
||||
*/
|
||||
struct of_dev_auxdata dove_auxdata_lookup[] __initdata = {
|
||||
OF_DEV_AUXDATA("marvell,orion-spi", 0xf1010600, "orion_spi.0", NULL),
|
||||
OF_DEV_AUXDATA("marvell,orion-spi", 0xf1014600, "orion_spi.1", NULL),
|
||||
OF_DEV_AUXDATA("marvell,orion-wdt", 0xf1020300, "orion_wdt", NULL),
|
||||
OF_DEV_AUXDATA("marvell,mv64xxx-i2c", 0xf1011000, "mv64xxx_i2c.0",
|
||||
NULL),
|
||||
OF_DEV_AUXDATA("marvell,orion-sata", 0xf10a0000, "sata_mv.0", NULL),
|
||||
OF_DEV_AUXDATA("marvell,dove-sdhci", 0xf1092000, "sdhci-dove.0", NULL),
|
||||
OF_DEV_AUXDATA("marvell,dove-sdhci", 0xf1090000, "sdhci-dove.1", NULL),
|
||||
{},
|
||||
};
|
||||
|
||||
static struct mv643xx_eth_platform_data dove_dt_ge00_data = {
|
||||
.phy_addr = MV643XX_ETH_PHY_ADDR_DEFAULT,
|
||||
};
|
||||
|
||||
static void __init dove_dt_init(void)
|
||||
{
|
||||
pr_info("Dove 88AP510 SoC, TCLK = %d MHz.\n",
|
||||
(dove_tclk + 499999) / 1000000);
|
||||
|
||||
#ifdef CONFIG_CACHE_TAUROS2
|
||||
tauros2_init();
|
||||
#endif
|
||||
dove_setup_cpu_mbus();
|
||||
|
||||
/* Setup root of clk tree */
|
||||
dove_clk_init();
|
||||
|
||||
/* Internal devices not ported to DT yet */
|
||||
dove_rtc_init();
|
||||
dove_xor0_init();
|
||||
dove_xor1_init();
|
||||
|
||||
dove_ge00_init(&dove_dt_ge00_data);
|
||||
dove_ehci0_init();
|
||||
dove_ehci1_init();
|
||||
dove_pcie_init(1, 1);
|
||||
dove_crypto_init();
|
||||
|
||||
of_platform_populate(NULL, of_default_bus_match_table,
|
||||
dove_auxdata_lookup, NULL);
|
||||
}
|
||||
|
||||
static const char * const dove_dt_board_compat[] = {
|
||||
"marvell,dove",
|
||||
NULL
|
||||
};
|
||||
|
||||
DT_MACHINE_START(DOVE_DT, "Marvell Dove (Flattened Device Tree)")
|
||||
.map_io = dove_map_io,
|
||||
.init_early = dove_init_early,
|
||||
.init_irq = orion_dt_init_irq,
|
||||
.timer = &dove_timer,
|
||||
.init_machine = dove_dt_init,
|
||||
.restart = dove_restart,
|
||||
.dt_compat = dove_dt_board_compat,
|
||||
MACHINE_END
|
||||
#endif
|
||||
|
||||
@ -26,7 +26,11 @@ void dove_init_irq(void);
|
||||
void dove_setup_cpu_mbus(void);
|
||||
void dove_ge00_init(struct mv643xx_eth_platform_data *eth_data);
|
||||
void dove_sata_init(struct mv_sata_platform_data *sata_data);
|
||||
#ifdef CONFIG_PCI
|
||||
void dove_pcie_init(int init_port0, int init_port1);
|
||||
#else
|
||||
static inline void dove_pcie_init(int init_port0, int init_port1) { }
|
||||
#endif
|
||||
void dove_ehci0_init(void);
|
||||
void dove_ehci1_init(void);
|
||||
void dove_uart0_init(void);
|
||||
|
||||
@ -13,24 +13,42 @@
|
||||
#include <mach/irqs.h>
|
||||
|
||||
#define CLOCK_GATING_CONTROL (DOVE_PMU_VIRT_BASE + 0x38)
|
||||
#define CLOCK_GATING_USB0_MASK (1 << 0)
|
||||
#define CLOCK_GATING_USB1_MASK (1 << 1)
|
||||
#define CLOCK_GATING_GBE_MASK (1 << 2)
|
||||
#define CLOCK_GATING_SATA_MASK (1 << 3)
|
||||
#define CLOCK_GATING_PCIE0_MASK (1 << 4)
|
||||
#define CLOCK_GATING_PCIE1_MASK (1 << 5)
|
||||
#define CLOCK_GATING_SDIO0_MASK (1 << 8)
|
||||
#define CLOCK_GATING_SDIO1_MASK (1 << 9)
|
||||
#define CLOCK_GATING_NAND_MASK (1 << 10)
|
||||
#define CLOCK_GATING_CAMERA_MASK (1 << 11)
|
||||
#define CLOCK_GATING_I2S0_MASK (1 << 12)
|
||||
#define CLOCK_GATING_I2S1_MASK (1 << 13)
|
||||
#define CLOCK_GATING_CRYPTO_MASK (1 << 15)
|
||||
#define CLOCK_GATING_AC97_MASK (1 << 21)
|
||||
#define CLOCK_GATING_PDMA_MASK (1 << 22)
|
||||
#define CLOCK_GATING_XOR0_MASK (1 << 23)
|
||||
#define CLOCK_GATING_XOR1_MASK (1 << 24)
|
||||
#define CLOCK_GATING_GIGA_PHY_MASK (1 << 30)
|
||||
#define CLOCK_GATING_BIT_USB0 0
|
||||
#define CLOCK_GATING_BIT_USB1 1
|
||||
#define CLOCK_GATING_BIT_GBE 2
|
||||
#define CLOCK_GATING_BIT_SATA 3
|
||||
#define CLOCK_GATING_BIT_PCIE0 4
|
||||
#define CLOCK_GATING_BIT_PCIE1 5
|
||||
#define CLOCK_GATING_BIT_SDIO0 8
|
||||
#define CLOCK_GATING_BIT_SDIO1 9
|
||||
#define CLOCK_GATING_BIT_NAND 10
|
||||
#define CLOCK_GATING_BIT_CAMERA 11
|
||||
#define CLOCK_GATING_BIT_I2S0 12
|
||||
#define CLOCK_GATING_BIT_I2S1 13
|
||||
#define CLOCK_GATING_BIT_CRYPTO 15
|
||||
#define CLOCK_GATING_BIT_AC97 21
|
||||
#define CLOCK_GATING_BIT_PDMA 22
|
||||
#define CLOCK_GATING_BIT_XOR0 23
|
||||
#define CLOCK_GATING_BIT_XOR1 24
|
||||
#define CLOCK_GATING_BIT_GIGA_PHY 30
|
||||
#define CLOCK_GATING_USB0_MASK (1 << CLOCK_GATING_BIT_USB0)
|
||||
#define CLOCK_GATING_USB1_MASK (1 << CLOCK_GATING_BIT_USB1)
|
||||
#define CLOCK_GATING_GBE_MASK (1 << CLOCK_GATING_BIT_GBE)
|
||||
#define CLOCK_GATING_SATA_MASK (1 << CLOCK_GATING_BIT_SATA)
|
||||
#define CLOCK_GATING_PCIE0_MASK (1 << CLOCK_GATING_BIT_PCIE0)
|
||||
#define CLOCK_GATING_PCIE1_MASK (1 << CLOCK_GATING_BIT_PCIE1)
|
||||
#define CLOCK_GATING_SDIO0_MASK (1 << CLOCK_GATING_BIT_SDIO0)
|
||||
#define CLOCK_GATING_SDIO1_MASK (1 << CLOCK_GATING_BIT_SDIO1)
|
||||
#define CLOCK_GATING_NAND_MASK (1 << CLOCK_GATING_BIT_NAND)
|
||||
#define CLOCK_GATING_CAMERA_MASK (1 << CLOCK_GATING_BIT_CAMERA)
|
||||
#define CLOCK_GATING_I2S0_MASK (1 << CLOCK_GATING_BIT_I2S0)
|
||||
#define CLOCK_GATING_I2S1_MASK (1 << CLOCK_GATING_BIT_I2S1)
|
||||
#define CLOCK_GATING_CRYPTO_MASK (1 << CLOCK_GATING_BIT_CRYPTO)
|
||||
#define CLOCK_GATING_AC97_MASK (1 << CLOCK_GATING_BIT_AC97)
|
||||
#define CLOCK_GATING_PDMA_MASK (1 << CLOCK_GATING_BIT_PDMA)
|
||||
#define CLOCK_GATING_XOR0_MASK (1 << CLOCK_GATING_BIT_XOR0)
|
||||
#define CLOCK_GATING_XOR1_MASK (1 << CLOCK_GATING_BIT_XOR1)
|
||||
#define CLOCK_GATING_GIGA_PHY_MASK (1 << CLOCK_GATING_BIT_GIGA_PHY)
|
||||
|
||||
#define PMU_INTERRUPT_CAUSE (DOVE_PMU_VIRT_BASE + 0x50)
|
||||
#define PMU_INTERRUPT_MASK (DOVE_PMU_VIRT_BASE + 0x54)
|
||||
|
||||
@ -94,6 +94,13 @@ config MACH_TS219_DT
|
||||
or MV6282. If you have the wrong one, the buttons will not
|
||||
work.
|
||||
|
||||
config MACH_DOCKSTAR_DT
|
||||
bool "Seagate FreeAgent Dockstar (Flattened Device Tree)"
|
||||
select ARCH_KIRKWOOD_DT
|
||||
help
|
||||
Say 'Y' here if you want your kernel to support the
|
||||
Seagate FreeAgent Dockstar (Flattened Device Tree).
|
||||
|
||||
config MACH_GOFLEXNET_DT
|
||||
bool "Seagate GoFlex Net (Flattened Device Tree)"
|
||||
select ARCH_KIRKWOOD_DT
|
||||
@ -109,6 +116,20 @@ config MACH_LSXL_DT
|
||||
Buffalo Linkstation LS-XHL & LS-CHLv2 devices, using
|
||||
Flattened Device Tree.
|
||||
|
||||
config MACH_IOMEGA_IX2_200_DT
|
||||
bool "Iomega StorCenter ix2-200 (Flattened Device Tree)"
|
||||
select ARCH_KIRKWOOD_DT
|
||||
help
|
||||
Say 'Y' here if you want your kernel to support the
|
||||
Iomega StorCenter ix2-200 (Flattened Device Tree).
|
||||
|
||||
config MACH_KM_KIRKWOOD_DT
|
||||
bool "Keymile Kirkwood Reference Design (Flattened Device Tree)"
|
||||
select ARCH_KIRKWOOD_DT
|
||||
help
|
||||
Say 'Y' here if you want your kernel to support the
|
||||
Keymile Kirkwood Reference Desgin, using Flattened Device Tree.
|
||||
|
||||
config MACH_TS219
|
||||
bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS"
|
||||
help
|
||||
|
||||
@ -26,5 +26,8 @@ obj-$(CONFIG_MACH_ICONNECT_DT) += board-iconnect.o
|
||||
obj-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += board-dnskw.o
|
||||
obj-$(CONFIG_MACH_IB62X0_DT) += board-ib62x0.o
|
||||
obj-$(CONFIG_MACH_TS219_DT) += board-ts219.o tsx1x-common.o
|
||||
obj-$(CONFIG_MACH_DOCKSTAR_DT) += board-dockstar.o
|
||||
obj-$(CONFIG_MACH_GOFLEXNET_DT) += board-goflexnet.o
|
||||
obj-$(CONFIG_MACH_LSXL_DT) += board-lsxl.o
|
||||
obj-$(CONFIG_MACH_IOMEGA_IX2_200_DT) += board-iomega_ix2_200.o
|
||||
obj-$(CONFIG_MACH_KM_KIRKWOOD_DT) += board-km_kirkwood.o
|
||||
|
||||
@ -1,3 +1,7 @@
|
||||
zreladdr-y += 0x00008000
|
||||
params_phys-y := 0x00000100
|
||||
initrd_phys-y := 0x00800000
|
||||
|
||||
dtb-$(CONFIG_MACH_IOMEGA_IX2_200_DT) += kirkwood-iomega_ix2_200.dtb
|
||||
dtb-$(CONFIG_MACH_DOCKSTAR_DT) += kirkwood-dockstar.dtb
|
||||
dtb-$(CONFIG_MACH_KM_KIRKWOOD_DT) += kirkwood-km_kirkwood.dtb
|
||||
|
||||
61
arch/arm/mach-kirkwood/board-dockstar.c
Normal file
61
arch/arm/mach-kirkwood/board-dockstar.c
Normal file
@ -0,0 +1,61 @@
|
||||
/*
|
||||
* arch/arm/mach-kirkwood/board-dockstar.c
|
||||
*
|
||||
* Seagate FreeAgent Dockstar Board Init for drivers not converted to
|
||||
* flattened device tree yet.
|
||||
*
|
||||
* This file is licensed under the terms of the GNU General Public
|
||||
* License version 2. This program is licensed "as is" without any
|
||||
* warranty of any kind, whether express or implied.
|
||||
*
|
||||
* Copied and modified for Seagate GoFlex Net support by
|
||||
* Joshua Coombs <josh.coombs@gmail.com> based on ArchLinux ARM's
|
||||
* GoFlex kernel patches.
|
||||
*
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/ata_platform.h>
|
||||
#include <linux/mv643xx_eth.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/of_address.h>
|
||||
#include <linux/of_fdt.h>
|
||||
#include <linux/of_irq.h>
|
||||
#include <linux/of_platform.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <asm/mach-types.h>
|
||||
#include <asm/mach/arch.h>
|
||||
#include <asm/mach/map.h>
|
||||
#include <mach/kirkwood.h>
|
||||
#include <mach/bridge-regs.h>
|
||||
#include <plat/mvsdio.h>
|
||||
#include "common.h"
|
||||
#include "mpp.h"
|
||||
|
||||
static struct mv643xx_eth_platform_data dockstar_ge00_data = {
|
||||
.phy_addr = MV643XX_ETH_PHY_ADDR(0),
|
||||
};
|
||||
|
||||
static unsigned int dockstar_mpp_config[] __initdata = {
|
||||
MPP29_GPIO, /* USB Power Enable */
|
||||
MPP46_GPIO, /* LED green */
|
||||
MPP47_GPIO, /* LED orange */
|
||||
0
|
||||
};
|
||||
|
||||
void __init dockstar_dt_init(void)
|
||||
{
|
||||
/*
|
||||
* Basic setup. Needs to be called early.
|
||||
*/
|
||||
kirkwood_mpp_conf(dockstar_mpp_config);
|
||||
|
||||
if (gpio_request(29, "USB Power Enable") != 0 ||
|
||||
gpio_direction_output(29, 1) != 0)
|
||||
pr_err("can't setup GPIO 29 (USB Power Enable)\n");
|
||||
kirkwood_ehci_init();
|
||||
|
||||
kirkwood_ge00_init(&dockstar_ge00_data);
|
||||
}
|
||||
@ -81,12 +81,21 @@ static void __init kirkwood_dt_init(void)
|
||||
if (of_machine_is_compatible("qnap,ts219"))
|
||||
qnap_dt_ts219_init();
|
||||
|
||||
if (of_machine_is_compatible("seagate,dockstar"))
|
||||
dockstar_dt_init();
|
||||
|
||||
if (of_machine_is_compatible("seagate,goflexnet"))
|
||||
goflexnet_init();
|
||||
|
||||
if (of_machine_is_compatible("buffalo,lsxl"))
|
||||
lsxl_init();
|
||||
|
||||
if (of_machine_is_compatible("iom,ix2-200"))
|
||||
iomega_ix2_200_init();
|
||||
|
||||
if (of_machine_is_compatible("keymile,km_kirkwood"))
|
||||
km_kirkwood_init();
|
||||
|
||||
of_platform_populate(NULL, kirkwood_dt_match_table,
|
||||
kirkwood_auxdata_lookup, NULL);
|
||||
}
|
||||
@ -98,8 +107,11 @@ static const char *kirkwood_dt_board_compat[] = {
|
||||
"iom,iconnect",
|
||||
"raidsonic,ib-nas62x0",
|
||||
"qnap,ts219",
|
||||
"seagate,dockstar",
|
||||
"seagate,goflexnet",
|
||||
"buffalo,lsxl",
|
||||
"iom,ix2-200",
|
||||
"keymile,km_kirkwood",
|
||||
NULL
|
||||
};
|
||||
|
||||
|
||||
57
arch/arm/mach-kirkwood/board-iomega_ix2_200.c
Normal file
57
arch/arm/mach-kirkwood/board-iomega_ix2_200.c
Normal file
@ -0,0 +1,57 @@
|
||||
/*
|
||||
* arch/arm/mach-kirkwood/board-iomega_ix2_200.c
|
||||
*
|
||||
* Iomega StorCenter ix2-200
|
||||
*
|
||||
* This file is licensed under the terms of the GNU General Public
|
||||
* License version 2. This program is licensed "as is" without any
|
||||
* warranty of any kind, whether express or implied.
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/mv643xx_eth.h>
|
||||
#include <linux/ethtool.h>
|
||||
#include <mach/kirkwood.h>
|
||||
#include "common.h"
|
||||
#include "mpp.h"
|
||||
|
||||
static struct mv643xx_eth_platform_data iomega_ix2_200_ge00_data = {
|
||||
.phy_addr = MV643XX_ETH_PHY_NONE,
|
||||
.speed = SPEED_1000,
|
||||
.duplex = DUPLEX_FULL,
|
||||
};
|
||||
|
||||
static unsigned int iomega_ix2_200_mpp_config[] __initdata = {
|
||||
MPP12_GPIO, /* Reset Button */
|
||||
MPP14_GPIO, /* Power Button */
|
||||
MPP15_GPIO, /* Backup LED (blue) */
|
||||
MPP16_GPIO, /* Power LED (white) */
|
||||
MPP35_GPIO, /* OTB Button */
|
||||
MPP36_GPIO, /* Rebuild LED (white) */
|
||||
MPP37_GPIO, /* Health LED (red) */
|
||||
MPP38_GPIO, /* SATA LED brightness control 1 */
|
||||
MPP39_GPIO, /* SATA LED brightness control 2 */
|
||||
MPP40_GPIO, /* Backup LED brightness control 1 */
|
||||
MPP41_GPIO, /* Backup LED brightness control 2 */
|
||||
MPP42_GPIO, /* Power LED brightness control 1 */
|
||||
MPP43_GPIO, /* Power LED brightness control 2 */
|
||||
MPP44_GPIO, /* Health LED brightness control 1 */
|
||||
MPP45_GPIO, /* Health LED brightness control 2 */
|
||||
MPP46_GPIO, /* Rebuild LED brightness control 1 */
|
||||
MPP47_GPIO, /* Rebuild LED brightness control 2 */
|
||||
0
|
||||
};
|
||||
|
||||
void __init iomega_ix2_200_init(void)
|
||||
{
|
||||
/*
|
||||
* Basic setup. Needs to be called early.
|
||||
*/
|
||||
kirkwood_mpp_conf(iomega_ix2_200_mpp_config);
|
||||
|
||||
kirkwood_ehci_init();
|
||||
|
||||
kirkwood_ge01_init(&iomega_ix2_200_ge00_data);
|
||||
}
|
||||
57
arch/arm/mach-kirkwood/board-km_kirkwood.c
Normal file
57
arch/arm/mach-kirkwood/board-km_kirkwood.c
Normal file
@ -0,0 +1,57 @@
|
||||
/*
|
||||
* Copyright 2012 2012 KEYMILE AG, CH-3097 Bern
|
||||
* Valentin Longchamp <valentin.longchamp@keymile.com>
|
||||
*
|
||||
* arch/arm/mach-kirkwood/board-km_kirkwood.c
|
||||
*
|
||||
* Keymile km_kirkwood Reference Desing Init for drivers not converted to
|
||||
* flattened device tree yet.
|
||||
*
|
||||
* This file is licensed under the terms of the GNU General Public
|
||||
* License version 2. This program is licensed "as is" without any
|
||||
* warranty of any kind, whether express or implied.
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/mv643xx_eth.h>
|
||||
#include <linux/clk.h>
|
||||
#include <linux/clk-private.h>
|
||||
#include "common.h"
|
||||
#include "mpp.h"
|
||||
|
||||
static struct mv643xx_eth_platform_data km_kirkwood_ge00_data = {
|
||||
.phy_addr = MV643XX_ETH_PHY_ADDR(0),
|
||||
};
|
||||
|
||||
static unsigned int km_kirkwood_mpp_config[] __initdata = {
|
||||
MPP8_GPIO, /* I2C SDA */
|
||||
MPP9_GPIO, /* I2C SCL */
|
||||
0
|
||||
};
|
||||
|
||||
void __init km_kirkwood_init(void)
|
||||
{
|
||||
struct clk *sata_clk;
|
||||
/*
|
||||
* Basic setup. Needs to be called early.
|
||||
*/
|
||||
kirkwood_mpp_conf(km_kirkwood_mpp_config);
|
||||
|
||||
/*
|
||||
* Our variant of kirkwood (integrated in the Bobcat) hangs on accessing
|
||||
* SATA bits (14-15) of the Clock Gating Control Register. Since these
|
||||
* devices are also not present in this variant, their clocks get
|
||||
* disabled because unused when clk_disable_unused() gets called.
|
||||
* That's why we change the flags to these clocks to CLK_IGNORE_UNUSED
|
||||
*/
|
||||
sata_clk = clk_get_sys("sata_mv.0", "0");
|
||||
if (!IS_ERR(sata_clk))
|
||||
sata_clk->flags |= CLK_IGNORE_UNUSED;
|
||||
sata_clk = clk_get_sys("sata_mv.0", "1");
|
||||
if (!IS_ERR(sata_clk))
|
||||
sata_clk->flags |= CLK_IGNORE_UNUSED;
|
||||
|
||||
kirkwood_ehci_init();
|
||||
kirkwood_ge00_init(&km_kirkwood_ge00_data);
|
||||
}
|
||||
@ -82,6 +82,12 @@ void ib62x0_init(void);
|
||||
static inline void ib62x0_init(void) {};
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_MACH_DOCKSTAR_DT
|
||||
void dockstar_dt_init(void);
|
||||
#else
|
||||
static inline void dockstar_dt_init(void) {};
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_MACH_GOFLEXNET_DT
|
||||
void goflexnet_init(void);
|
||||
#else
|
||||
@ -94,6 +100,18 @@ void lsxl_init(void);
|
||||
static inline void lsxl_init(void) {};
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_MACH_IOMEGA_IX2_200_DT
|
||||
void iomega_ix2_200_init(void);
|
||||
#else
|
||||
static inline void iomega_ix2_200_init(void) {};
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_MACH_KM_KIRKWOOD_DT
|
||||
void km_kirkwood_init(void);
|
||||
#else
|
||||
static inline void km_kirkwood_init(void) {};
|
||||
#endif
|
||||
|
||||
/* early init functions not converted to fdt yet */
|
||||
char *kirkwood_id(void);
|
||||
void kirkwood_l2_init(void);
|
||||
|
||||
Loading…
Reference in New Issue
Block a user