dmaengine: PL08x: ignore 'direction' argument in dma_slave_config

Ignore the direction argument in dma_slave_config, and configure both
directions independently.  We still check that the configuration for
the intended direction is valid; this check will eventually be dropped.
This check is just for debugging at present.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This commit is contained in:
Russell King 2012-05-16 11:33:31 +01:00
parent 9862ba17b7
commit 800d683e6b

View File

@ -218,8 +218,6 @@ enum pl08x_dma_chan_state {
* @name: name of channel
* @cd: channel platform data
* @runtime_addr: address for RX/TX according to the runtime config
* @runtime_direction: current direction of this channel according to
* runtime config
* @pend_list: queued transactions pending on this channel
* @at: active transaction on this channel
* @lock: a lock for this channel data
@ -239,7 +237,6 @@ struct pl08x_dma_chan {
struct dma_slave_config cfg;
u32 src_cctl;
u32 dst_cctl;
enum dma_transfer_direction runtime_direction;
struct list_head pend_list;
struct pl08x_txd *at;
spinlock_t lock;
@ -1239,50 +1236,31 @@ static int dma_set_runtime_config(struct dma_chan *chan,
{
struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
struct pl08x_driver_data *pl08x = plchan->host;
enum dma_slave_buswidth addr_width;
u32 maxburst, cctl = 0;
u32 src_cctl, dst_cctl;
if (!plchan->slave)
return -EINVAL;
/* Transfer direction */
plchan->runtime_direction = config->direction;
if (config->direction == DMA_MEM_TO_DEV) {
addr_width = config->dst_addr_width;
maxburst = config->dst_maxburst;
} else if (config->direction == DMA_DEV_TO_MEM) {
addr_width = config->src_addr_width;
maxburst = config->src_maxburst;
} else {
dst_cctl = pl08x_get_cctl(plchan, config->dst_addr_width,
config->dst_maxburst);
if (dst_cctl == ~0 && config->direction == DMA_MEM_TO_DEV) {
dev_err(&pl08x->adev->dev,
"bad runtime_config: alien transfer direction\n");
"bad runtime_config: alien address width (M2D)\n");
return -EINVAL;
}
cctl = pl08x_get_cctl(plchan, addr_width, maxburst);
if (cctl == ~0) {
src_cctl = pl08x_get_cctl(plchan, config->src_addr_width,
config->src_maxburst);
if (src_cctl == ~0 && config->direction == DMA_DEV_TO_MEM) {
dev_err(&pl08x->adev->dev,
"bad runtime_config: alien address width\n");
"bad runtime_config: alien address width (D2M)\n");
return -EINVAL;
}
plchan->dst_cctl = dst_cctl;
plchan->src_cctl = src_cctl;
plchan->cfg = *config;
if (plchan->runtime_direction == DMA_DEV_TO_MEM) {
plchan->src_cctl = cctl;
} else {
plchan->dst_cctl = cctl;
}
dev_dbg(&pl08x->adev->dev,
"configured channel %s (%s) for %s, data width %d, "
"maxburst %d words, LE, CCTL=0x%08x\n",
dma_chan_name(chan), plchan->name,
(config->direction == DMA_DEV_TO_MEM) ? "RX" : "TX",
addr_width,
maxburst,
cctl);
return 0;
}
@ -1470,11 +1448,6 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg(
return NULL;
}
if (direction != plchan->runtime_direction)
dev_err(&pl08x->adev->dev, "%s DMA setup does not match "
"the direction configured for the PrimeCell\n",
__func__);
/*
* Set up addresses, the PrimeCell configured address
* will take precedence since this may configure the
@ -1499,6 +1472,13 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg(
return NULL;
}
if (cctl == ~0) {
pl08x_free_txd(pl08x, txd);
dev_err(&pl08x->adev->dev,
"DMA slave configuration botched?\n");
return NULL;
}
txd->cctl = cctl | pl08x_select_bus(src_buses, dst_buses);
if (plchan->cfg.device_fc)