ARM: mxc: don't allow to compile together i.MX51 and i.MX53

The two SoCs have different PHYS_OFFSETs so it's not (yet) possible to
compile a single (working) kernel for these.

LAKML-Reference: 1302464943-20721-4-git-send-email-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This commit is contained in:
Uwe Kleine-König 2011-04-08 11:06:43 +02:00 committed by Sascha Hauer
parent 91350f6677
commit 7db4d88206
3 changed files with 51 additions and 21 deletions

View File

@ -13,7 +13,7 @@ CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_MXC=y
CONFIG_ARCH_MX5=y
CONFIG_ARCH_MX51=y
CONFIG_MACH_MX51_BABBAGE=y
CONFIG_MACH_MX51_3DS=y
CONFIG_MACH_EUKREA_CPUIMX51=y

View File

@ -1,11 +1,11 @@
if ARCH_MX5
# ARCH_MX50/51/53 are left to mark places where prevent multi-soc in single
if ARCH_MX503 || ARCH_MX51
# ARCH_MX5/50/53 are left to mark places where prevent multi-soc in single
# image. So for most time, SOC_IMX50/51/53 should be used.
config ARCH_MX50
config ARCH_MX5
bool
config ARCH_MX51
config ARCH_MX50
bool
config ARCH_MX53
@ -19,6 +19,7 @@ config SOC_IMX50
select ARCH_MXC_IOMUX_V3
select ARCH_MXC_AUDMUX_V2
select ARCH_HAS_CPUFREQ
select ARCH_MX5
select ARCH_MX50
config SOC_IMX51
@ -29,7 +30,7 @@ config SOC_IMX51
select ARCH_MXC_IOMUX_V3
select ARCH_MXC_AUDMUX_V2
select ARCH_HAS_CPUFREQ
select ARCH_MX51
select ARCH_MX5
config SOC_IMX53
bool
@ -37,9 +38,29 @@ config SOC_IMX53
select ARM_L1_CACHE_SHIFT_6
select MXC_TZIC
select ARCH_MXC_IOMUX_V3
select ARCH_MX5
select ARCH_MX53
comment "MX5 platforms:"
if ARCH_MX50_SUPPORTED
#comment "i.MX50 machines:"
config MACH_MX50_RDP
bool "Support MX50 reference design platform"
depends on BROKEN
select SOC_IMX50
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select IMX_HAVE_PLATFORM_SPI_IMX
select IMX_HAVE_PLATFORM_FEC
help
Include support for MX50 reference design platform (RDP) board. This
includes specific configurations for the board and its peripherals.
endif # ARCH_MX50_SUPPORTED
if ARCH_MX51
comment "i.MX51 machines:"
config MACH_MX51_BABBAGE
bool "Support MX51 BABBAGE platforms"
@ -142,6 +163,11 @@ config MACH_MX51_EFIKASB
Include support for Genesi Efika Smartbook. This includes specific
configurations for the board and its peripherals.
endif # ARCH_MX51
if ARCH_MX53_SUPPORTED
comment "i.MX53 machines:"
config MACH_MX53_EVK
bool "Support MX53 EVK platforms"
select SOC_IMX53
@ -177,17 +203,6 @@ config MACH_MX53_LOCO
Include support for MX53 LOCO platform. This includes specific
configurations for the board and its peripherals.
config MACH_MX50_RDP
bool "Support MX50 reference design platform"
depends on BROKEN
select SOC_IMX50
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select IMX_HAVE_PLATFORM_SPI_IMX
select IMX_HAVE_PLATFORM_FEC
help
Include support for MX50 reference design platform (RDP) board. This
includes specific configurations for the board and its peripherals.
endif # ARCH_MX53_SUPPORTED
endif

View File

@ -4,6 +4,12 @@ source "arch/arm/plat-mxc/devices/Kconfig"
menu "Freescale MXC Implementations"
config ARCH_MX50_SUPPORTED
bool
config ARCH_MX53_SUPPORTED
bool
choice
prompt "Freescale CPU family:"
default ARCH_MX3
@ -28,8 +34,17 @@ config ARCH_MX3
help
This enables support for systems based on the Freescale i.MX3 family
config ARCH_MX5
bool "MX5-based"
config ARCH_MX503
bool "i.MX50 + i.MX53"
select ARCH_MX50_SUPPORTED
select ARCH_MX53_SUPPORTED
help
This enables support for machines using Freescale's i.MX50 and i.MX51
processors.
config ARCH_MX51
bool "i.MX51"
select ARCH_MX51_SUPPORTED
help
This enables support for systems based on the Freescale i.MX51 family