leandrof/linux
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

nand/denali: use dev_xx debug function to replace nand_dbg_print and some printk

Browse Source 
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
This commit is contained in:
Chuanxiao Dong 2010-08-10 00:16:51 +08:00 committed by David Woodhouse
parent 8ae61ebddb
commit 7cfffac06c
2 changed files with 42 additions and 184 deletions
drivers/mtd/nand
denali.cdenali.h

208
drivers/mtd/nand/denali.c
View File

@ -119,9 +119,6 @@ static const uint32_t reset_complete[4] = {INTR_STATUS0__RST_COMP,
INTR_STATUS2__RST_COMP, INTR_STATUS2__RST_COMP,
INTR_STATUS3__RST_COMP}; INTR_STATUS3__RST_COMP};
/* specifies the debug level of the driver */
static int nand_debug_level;
/* forward declarations */ /* forward declarations */
static void clear_interrupts(struct denali_nand_info *denali); static void clear_interrupts(struct denali_nand_info *denali);
static uint32_t wait_for_irq(struct denali_nand_info *denali, static uint32_t wait_for_irq(struct denali_nand_info *denali,
@ -130,8 +127,6 @@ static void denali_irq_enable(struct denali_nand_info *denali,
uint32_t int_mask); uint32_t int_mask);
static uint32_t read_interrupt_status(struct denali_nand_info *denali); static uint32_t read_interrupt_status(struct denali_nand_info *denali);
#define DEBUG_DENALI 0
/* Certain operations for the denali NAND controller use /* Certain operations for the denali NAND controller use
* an indexed mode to read/write data. The operation is * an indexed mode to read/write data. The operation is
* performed by writing the address value of the command * performed by writing the address value of the command
@ -181,11 +176,6 @@ static void read_status(struct denali_nand_info *denali)
/* update buffer with status value */ /* update buffer with status value */
write_byte_to_buf(denali, ioread32(denali->flash_mem + 0x10)); write_byte_to_buf(denali, ioread32(denali->flash_mem + 0x10));
#if DEBUG_DENALI
printk(KERN_INFO "device reporting status value of 0x%2x\n",
denali->buf.buf[0]);
#endif
} }
/* resets a specific device connected to the core */ /* resets a specific device connected to the core */
@ -204,7 +194,7 @@ static void reset_bank(struct denali_nand_info *denali)
irq_status = wait_for_irq(denali, irq_mask); irq_status = wait_for_irq(denali, irq_mask);
if (irq_status & operation_timeout[denali->flash_bank]) if (irq_status & operation_timeout[denali->flash_bank])
printk(KERN_ERR "reset bank failed.\n"); dev_err(&denali->dev->dev, "reset bank failed.\n");
} }
/* Reset the flash controller */ /* Reset the flash controller */
@ -212,7 +202,7 @@ static uint16_t denali_nand_reset(struct denali_nand_info *denali)
{ {
uint32_t i; uint32_t i;
nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n", dev_dbg(&denali->dev->dev, "%s, Line %d, Function: %s\n",
__FILE__, __LINE__, __func__); __FILE__, __LINE__, __func__);
for (i = 0 ; i < LLD_MAX_FLASH_BANKS; i++) for (i = 0 ; i < LLD_MAX_FLASH_BANKS; i++)
@ -228,7 +218,7 @@ static uint16_t denali_nand_reset(struct denali_nand_info *denali)
; ;
if (ioread32(denali->flash_reg + intr_status_addresses[i]) & if (ioread32(denali->flash_reg + intr_status_addresses[i]) &
operation_timeout[i]) operation_timeout[i])
nand_dbg_print(NAND_DBG_WARN, dev_dbg(&denali->dev->dev,
"NAND Reset operation timed out on bank %d\n", i); "NAND Reset operation timed out on bank %d\n", i);
} }
@ -266,7 +256,7 @@ static void nand_onfi_timing_set(struct denali_nand_info *denali,
uint16_t acc_clks; uint16_t acc_clks;
uint16_t addr_2_data, re_2_we, re_2_re, we_2_re, cs_cnt; uint16_t addr_2_data, re_2_we, re_2_re, we_2_re, cs_cnt;
nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n", dev_dbg(&denali->dev->dev, "%s, Line %d, Function: %s\n",
__FILE__, __LINE__, __func__); __FILE__, __LINE__, __func__);
en_lo = CEIL_DIV(Trp[mode], CLK_X); en_lo = CEIL_DIV(Trp[mode], CLK_X);
@ -303,7 +293,7 @@ static void nand_onfi_timing_set(struct denali_nand_info *denali,
acc_clks++; acc_clks++;
if ((data_invalid - acc_clks * CLK_X) < 2) if ((data_invalid - acc_clks * CLK_X) < 2)
nand_dbg_print(NAND_DBG_WARN, "%s, Line %d: Warning!\n", dev_warn(&denali->dev->dev, "%s, Line %d: Warning!\n",
__FILE__, __LINE__); __FILE__, __LINE__);
addr_2_data = CEIL_DIV(Tadl[mode], CLK_X); addr_2_data = CEIL_DIV(Tadl[mode], CLK_X);
@ -431,7 +421,7 @@ static void get_hynix_nand_para(struct denali_nand_info *denali,
#endif #endif
break; break;
default: default:
nand_dbg_print(NAND_DBG_WARN, dev_warn(&denali->dev->dev,
"Spectra: Unknown Hynix NAND (Device ID: 0x%x)." "Spectra: Unknown Hynix NAND (Device ID: 0x%x)."
"Will use default parameter values instead.\n", "Will use default parameter values instead.\n",
device_id); device_id);
@ -453,7 +443,7 @@ static void find_valid_banks(struct denali_nand_info *denali)
index_addr_read_data(denali, index_addr_read_data(denali,
(uint32_t)(MODE_11 | (i << 24) | 2), &id[i]); (uint32_t)(MODE_11 | (i << 24) | 2), &id[i]);
nand_dbg_print(NAND_DBG_DEBUG, dev_dbg(&denali->dev->dev,
"Return 1st ID for bank[%d]: %x\n", i, id[i]); "Return 1st ID for bank[%d]: %x\n", i, id[i]);
if (i == 0) { if (i == 0) {
@ -473,12 +463,13 @@ static void find_valid_banks(struct denali_nand_info *denali)
* Multichip support is not enabled. * Multichip support is not enabled.
*/ */
if (denali->total_used_banks != 1) { if (denali->total_used_banks != 1) {
printk(KERN_ERR "Sorry, Intel CE4100 only supports " dev_err(&denali->dev->dev,
"Sorry, Intel CE4100 only supports "
"a single NAND device.\n"); "a single NAND device.\n");
BUG(); BUG();
} }
} }
nand_dbg_print(NAND_DBG_DEBUG, dev_dbg(&denali->dev->dev,
"denali->total_used_banks: %d\n", denali->total_used_banks); "denali->total_used_banks: %d\n", denali->total_used_banks);
} }
@ -512,8 +503,9 @@ static uint16_t denali_nand_timing_set(struct denali_nand_info *denali)
uint32_t id_bytes[5], addr; uint32_t id_bytes[5], addr;
uint8_t i, maf_id, device_id; uint8_t i, maf_id, device_id;
nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n", dev_dbg(&denali->dev->dev,
__FILE__, __LINE__, __func__); "%s, Line %d, Function: %s\n",
__FILE__, __LINE__, __func__);
/* Use read id method to get device ID and other /* Use read id method to get device ID and other
* params. For some NAND chips, controller can't * params. For some NAND chips, controller can't
@ -540,12 +532,14 @@ static uint16_t denali_nand_timing_set(struct denali_nand_info *denali)
get_hynix_nand_para(denali, device_id); get_hynix_nand_para(denali, device_id);
} }
nand_dbg_print(NAND_DBG_DEBUG, "Dump timing register values:" dev_info(&denali->dev->dev,
"acc_clks: %d, re_2_we: %d, we_2_re: %d," "Dump timing register values:"
"addr_2_data: %d, rdwr_en_lo_cnt: %d, " "acc_clks: %d, re_2_we: %d, re_2_re: %d\n"
"we_2_re: %d, addr_2_data: %d, rdwr_en_lo_cnt: %d\n"
"rdwr_en_hi_cnt: %d, cs_setup_cnt: %d\n", "rdwr_en_hi_cnt: %d, cs_setup_cnt: %d\n",
ioread32(denali->flash_reg + ACC_CLKS), ioread32(denali->flash_reg + ACC_CLKS),
ioread32(denali->flash_reg + RE_2_WE), ioread32(denali->flash_reg + RE_2_WE),
ioread32(denali->flash_reg + RE_2_RE),
ioread32(denali->flash_reg + WE_2_RE), ioread32(denali->flash_reg + WE_2_RE),
ioread32(denali->flash_reg + ADDR_2_DATA), ioread32(denali->flash_reg + ADDR_2_DATA),
ioread32(denali->flash_reg + RDWR_EN_LO_CNT), ioread32(denali->flash_reg + RDWR_EN_LO_CNT),
@ -568,7 +562,7 @@ static uint16_t denali_nand_timing_set(struct denali_nand_info *denali)
static void denali_set_intr_modes(struct denali_nand_info *denali, static void denali_set_intr_modes(struct denali_nand_info *denali,
uint16_t INT_ENABLE) uint16_t INT_ENABLE)
{ {
nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n", dev_dbg(&denali->dev->dev, "%s, Line %d, Function: %s\n",
__FILE__, __LINE__, __func__); __FILE__, __LINE__, __func__);
if (INT_ENABLE) if (INT_ENABLE)
@ -645,11 +639,6 @@ static void clear_interrupts(struct denali_nand_info *denali)
status = read_interrupt_status(denali); status = read_interrupt_status(denali);
clear_interrupt(denali, status); clear_interrupt(denali, status);
#if DEBUG_DENALI
denali->irq_debug_array[denali->idx++] = 0x30000000 | status;
denali->idx %= 32;
#endif
denali->irq_status = 0x0; denali->irq_status = 0x0;
spin_unlock_irq(&denali->irq_lock); spin_unlock_irq(&denali->irq_lock);
} }
@ -663,17 +652,6 @@ static uint32_t read_interrupt_status(struct denali_nand_info *denali)
return ioread32(denali->flash_reg + intr_status_reg); return ioread32(denali->flash_reg + intr_status_reg);
} }
#if DEBUG_DENALI
static void print_irq_log(struct denali_nand_info *denali)
{
int i = 0;
printk(KERN_INFO "ISR debug log index = %X\n", denali->idx);
for (i = 0; i < 32; i++)
printk(KERN_INFO "%08X: %08X\n", i, denali->irq_debug_array[i]);
}
#endif
/* This is the interrupt service routine. It handles all interrupts /* This is the interrupt service routine. It handles all interrupts
* sent to this device. Note that on CE4100, this is a shared * sent to this device. Note that on CE4100, this is a shared
* interrupt. * interrupt.
@ -694,13 +672,6 @@ static irqreturn_t denali_isr(int irq, void *dev_id)
* the interrupt, since this is a shared interrupt */ * the interrupt, since this is a shared interrupt */
irq_status = denali_irq_detected(denali); irq_status = denali_irq_detected(denali);
if (irq_status != 0) { if (irq_status != 0) {
#if DEBUG_DENALI
denali->irq_debug_array[denali->idx++] =
0x10000000 | irq_status;
denali->idx %= 32;
printk(KERN_INFO "IRQ status = 0x%04x\n", irq_status);
#endif
/* handle interrupt */ /* handle interrupt */
/* first acknowledge it */ /* first acknowledge it */
clear_interrupt(denali, irq_status); clear_interrupt(denali, irq_status);
@ -726,41 +697,20 @@ static uint32_t wait_for_irq(struct denali_nand_info *denali, uint32_t irq_mask)
unsigned long timeout = msecs_to_jiffies(1000); unsigned long timeout = msecs_to_jiffies(1000);
do { do {
#if DEBUG_DENALI
printk(KERN_INFO "waiting for 0x%x\n", irq_mask);
#endif
comp_res = comp_res =
wait_for_completion_timeout(&denali->complete, timeout); wait_for_completion_timeout(&denali->complete, timeout);
spin_lock_irq(&denali->irq_lock); spin_lock_irq(&denali->irq_lock);
intr_status = denali->irq_status; intr_status = denali->irq_status;
#if DEBUG_DENALI
denali->irq_debug_array[denali->idx++] =
0x20000000 | (irq_mask << 16) | intr_status;
denali->idx %= 32;
#endif
if (intr_status & irq_mask) { if (intr_status & irq_mask) {
denali->irq_status &= ~irq_mask; denali->irq_status &= ~irq_mask;
spin_unlock_irq(&denali->irq_lock); spin_unlock_irq(&denali->irq_lock);
#if DEBUG_DENALI
if (retry)
printk(KERN_INFO "status on retry = 0x%x\n",
intr_status);
#endif
/* our interrupt was detected */ /* our interrupt was detected */
break; break;
} else { } else {
/* these are not the interrupts you are looking for - /* these are not the interrupts you are looking for -
* need to wait again */ * need to wait again */
spin_unlock_irq(&denali->irq_lock); spin_unlock_irq(&denali->irq_lock);
#if DEBUG_DENALI
print_irq_log(denali);
printk(KERN_INFO "received irq nobody cared:"
" irq_status = 0x%x, irq_mask = 0x%x,"
" timeout = %ld\n", intr_status,
irq_mask, comp_res);
#endif
retry = true; retry = true;
} }
} while (comp_res != 0); } while (comp_res != 0);
@ -814,16 +764,6 @@ static int denali_send_pipeline_cmd(struct denali_nand_info *denali,
setup_ecc_for_xfer(denali, ecc_en, transfer_spare); setup_ecc_for_xfer(denali, ecc_en, transfer_spare);
#if DEBUG_DENALI
spin_lock_irq(&denali->irq_lock);
denali->irq_debug_array[denali->idx++] =
0x40000000 | ioread32(denali->flash_reg + ECC_ENABLE) |
(access_type << 4);
denali->idx %= 32;
spin_unlock_irq(&denali->irq_lock);
#endif
/* clear interrupts */ /* clear interrupts */
clear_interrupts(denali); clear_interrupts(denali);
@ -862,9 +802,10 @@ static int denali_send_pipeline_cmd(struct denali_nand_info *denali,
irq_status = wait_for_irq(denali, irq_mask); irq_status = wait_for_irq(denali, irq_mask);
if (irq_status == 0) { if (irq_status == 0) {
printk(KERN_ERR "cmd, page, addr on timeout " dev_err(&denali->dev->dev,
"(0x%x, 0x%x, 0x%x)\n", cmd, "cmd, page, addr on timeout "
denali->page, addr); "(0x%x, 0x%x, 0x%x)\n",
cmd, denali->page, addr);
status = FAIL; status = FAIL;
} else { } else {
cmd = MODE_01 | addr; cmd = MODE_01 | addr;
@ -932,24 +873,15 @@ static int write_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
DENALI_WRITE) == PASS) { DENALI_WRITE) == PASS) {
write_data_to_flash_mem(denali, buf, mtd->oobsize); write_data_to_flash_mem(denali, buf, mtd->oobsize);
#if DEBUG_DENALI
spin_lock_irq(&denali->irq_lock);
denali->irq_debug_array[denali->idx++] =
0x80000000 | mtd->oobsize;
denali->idx %= 32;
spin_unlock_irq(&denali->irq_lock);
#endif
/* wait for operation to complete */ /* wait for operation to complete */
irq_status = wait_for_irq(denali, irq_mask); irq_status = wait_for_irq(denali, irq_mask);
if (irq_status == 0) { if (irq_status == 0) {
printk(KERN_ERR "OOB write failed\n"); dev_err(&denali->dev->dev, "OOB write failed\n");
status = -EIO; status = -EIO;
} }
} else { } else {
printk(KERN_ERR "unable to send pipeline command\n"); dev_err(&denali->dev->dev, "unable to send pipeline command\n");
status = -EIO; status = -EIO;
} }
return status; return status;
@ -964,9 +896,6 @@ static void read_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
denali->page = page; denali->page = page;
#if DEBUG_DENALI
printk(KERN_INFO "read_oob %d\n", page);
#endif
if (denali_send_pipeline_cmd(denali, false, true, SPARE_ACCESS, if (denali_send_pipeline_cmd(denali, false, true, SPARE_ACCESS,
DENALI_READ) == PASS) { DENALI_READ) == PASS) {
read_data_from_flash_mem(denali, buf, mtd->oobsize); read_data_from_flash_mem(denali, buf, mtd->oobsize);
@ -977,7 +906,7 @@ static void read_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
irq_status = wait_for_irq(denali, irq_mask); irq_status = wait_for_irq(denali, irq_mask);
if (irq_status == 0) if (irq_status == 0)
printk(KERN_ERR "page on OOB timeout %d\n", dev_err(&denali->dev->dev, "page on OOB timeout %d\n",
denali->page); denali->page);
/* We set the device back to MAIN_ACCESS here as I observed /* We set the device back to MAIN_ACCESS here as I observed
@ -989,14 +918,6 @@ static void read_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
addr = BANK(denali->flash_bank) | denali->page; addr = BANK(denali->flash_bank) | denali->page;
cmd = MODE_10 | addr; cmd = MODE_10 | addr;
index_addr(denali, (uint32_t)cmd, MAIN_ACCESS); index_addr(denali, (uint32_t)cmd, MAIN_ACCESS);
#if DEBUG_DENALI
spin_lock_irq(&denali->irq_lock);
denali->irq_debug_array[denali->idx++] =
0x60000000 | mtd->oobsize;
denali->idx %= 32;
spin_unlock_irq(&denali->irq_lock);
#endif
} }
} }
@ -1070,13 +991,6 @@ static bool handle_ecc(struct denali_nand_info *denali, uint8_t *buf,
* */ * */
check_erased_page = true; check_erased_page = true;
} }
#if DEBUG_DENALI
printk(KERN_INFO "Detected ECC error in page %d:"
" err_addr = 0x%08x, info to fix is"
" 0x%08x\n", denali->page, err_address,
err_correction_info);
#endif
} while (!ECC_LAST_ERR(err_correction_info)); } while (!ECC_LAST_ERR(err_correction_info));
/* Once handle all ecc errors, controller will triger /* Once handle all ecc errors, controller will triger
* a ECC_TRANSACTION_DONE interrupt, so here just wait * a ECC_TRANSACTION_DONE interrupt, so here just wait
@ -1170,8 +1084,9 @@ static void write_page(struct mtd_info *mtd, struct nand_chip *chip,
irq_status = wait_for_irq(denali, irq_mask); irq_status = wait_for_irq(denali, irq_mask);
if (irq_status == 0) { if (irq_status == 0) {
printk(KERN_ERR "timeout on write_page" dev_err(&denali->dev->dev,
" (type = %d)\n", raw_xfer); "timeout on write_page (type = %d)\n",
raw_xfer);
denali->status = denali->status =
(irq_status & INTR_STATUS0__PROGRAM_FAIL) ? (irq_status & INTR_STATUS0__PROGRAM_FAIL) ?
NAND_STATUS_FAIL : PASS; NAND_STATUS_FAIL : PASS;
@ -1308,18 +1223,13 @@ static uint8_t denali_read_byte(struct mtd_info *mtd)
if (denali->buf.head < denali->buf.tail) if (denali->buf.head < denali->buf.tail)
result = denali->buf.buf[denali->buf.head++]; result = denali->buf.buf[denali->buf.head++];
#if DEBUG_DENALI
printk(KERN_INFO "read byte -> 0x%02x\n", result);
#endif
return result; return result;
} }
static void denali_select_chip(struct mtd_info *mtd, int chip) static void denali_select_chip(struct mtd_info *mtd, int chip)
{ {
struct denali_nand_info *denali = mtd_to_denali(mtd); struct denali_nand_info *denali = mtd_to_denali(mtd);
#if DEBUG_DENALI
printk(KERN_INFO "denali select chip %d\n", chip);
#endif
spin_lock_irq(&denali->irq_lock); spin_lock_irq(&denali->irq_lock);
denali->flash_bank = chip; denali->flash_bank = chip;
spin_unlock_irq(&denali->irq_lock); spin_unlock_irq(&denali->irq_lock);
@ -1331,9 +1241,6 @@ static int denali_waitfunc(struct mtd_info *mtd, struct nand_chip *chip)
int status = denali->status; int status = denali->status;
denali->status = 0; denali->status = 0;
#if DEBUG_DENALI
printk(KERN_INFO "waitfunc %d\n", status);
#endif
return status; return status;
} }
@ -1343,9 +1250,6 @@ static void denali_erase(struct mtd_info *mtd, int page)
uint32_t cmd = 0x0, irq_status = 0; uint32_t cmd = 0x0, irq_status = 0;
#if DEBUG_DENALI
printk(KERN_INFO "erase page: %d\n", page);
#endif
/* clear interrupts */ /* clear interrupts */
clear_interrupts(denali); clear_interrupts(denali);
@ -1368,9 +1272,6 @@ static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col,
uint32_t addr, id; uint32_t addr, id;
int i; int i;
#if DEBUG_DENALI
printk(KERN_INFO "cmdfunc: 0x%x %d %d\n", cmd, col, page);
#endif
switch (cmd) { switch (cmd) {
case NAND_CMD_PAGEPROG: case NAND_CMD_PAGEPROG:
break; break;
@ -1414,7 +1315,9 @@ static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col,
static int denali_ecc_calculate(struct mtd_info *mtd, const uint8_t *data, static int denali_ecc_calculate(struct mtd_info *mtd, const uint8_t *data,
uint8_t *ecc_code) uint8_t *ecc_code)
{ {
printk(KERN_ERR "denali_ecc_calculate called unexpectedly\n"); struct denali_nand_info *denali = mtd_to_denali(mtd);
dev_err(&denali->dev->dev,
"denali_ecc_calculate called unexpectedly\n");
BUG(); BUG();
return -EIO; return -EIO;
} }
@ -1422,14 +1325,18 @@ static int denali_ecc_calculate(struct mtd_info *mtd, const uint8_t *data,
static int denali_ecc_correct(struct mtd_info *mtd, uint8_t *data, static int denali_ecc_correct(struct mtd_info *mtd, uint8_t *data,
uint8_t *read_ecc, uint8_t *calc_ecc) uint8_t *read_ecc, uint8_t *calc_ecc)
{ {
printk(KERN_ERR "denali_ecc_correct called unexpectedly\n"); struct denali_nand_info *denali = mtd_to_denali(mtd);
dev_err(&denali->dev->dev,
"denali_ecc_correct called unexpectedly\n");
BUG(); BUG();
return -EIO; return -EIO;
} }
static void denali_ecc_hwctl(struct mtd_info *mtd, int mode) static void denali_ecc_hwctl(struct mtd_info *mtd, int mode)
{ {
printk(KERN_ERR "denali_ecc_hwctl called unexpectedly\n"); struct denali_nand_info *denali = mtd_to_denali(mtd);
dev_err(&denali->dev->dev,
"denali_ecc_hwctl called unexpectedly\n");
BUG(); BUG();
} }
/* end NAND core entry points */ /* end NAND core entry points */
@ -1525,9 +1432,6 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
unsigned long csr_len, mem_len; unsigned long csr_len, mem_len;
struct denali_nand_info *denali; struct denali_nand_info *denali;
nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
__FILE__, __LINE__, __func__);
denali = kzalloc(sizeof(*denali), GFP_KERNEL); denali = kzalloc(sizeof(*denali), GFP_KERNEL);
if (!denali) if (!denali)
return -ENOMEM; return -ENOMEM;
@ -1562,11 +1466,6 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
if (!mem_len) { if (!mem_len) {
mem_base = csr_base + csr_len; mem_base = csr_base + csr_len;
mem_len = csr_len; mem_len = csr_len;
nand_dbg_print(NAND_DBG_WARN,
"Spectra: No second"
" BAR for PCI device;"
" assuming %08Lx\n",
(uint64_t)csr_base);
} }
} }
@ -1583,7 +1482,7 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
PCI_DMA_BIDIRECTIONAL); PCI_DMA_BIDIRECTIONAL);
if (pci_dma_mapping_error(dev, denali->buf.dma_buf)) { if (pci_dma_mapping_error(dev, denali->buf.dma_buf)) {
printk(KERN_ERR "Spectra: failed to map DMA buffer\n"); dev_err(&dev->dev, "Spectra: failed to map DMA buffer\n");
goto failed_enable_dev; goto failed_enable_dev;
} }
@ -1602,8 +1501,6 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
ret = -ENOMEM; ret = -ENOMEM;
goto failed_req_regions; goto failed_req_regions;
} }
nand_dbg_print(NAND_DBG_DEBUG, "Spectra: CSR 0x%08Lx -> 0x%p (0x%lx)\n",
(uint64_t)csr_base, denali->flash_reg, csr_len);
denali->flash_mem = ioremap_nocache(mem_base, mem_len); denali->flash_mem = ioremap_nocache(mem_base, mem_len);
if (!denali->flash_mem) { if (!denali->flash_mem) {
@ -1612,15 +1509,9 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
goto failed_remap_reg; goto failed_remap_reg;
} }
nand_dbg_print(NAND_DBG_WARN,
"Spectra: Remapped flash base address: "
"0x%p, len: %ld\n",
denali->flash_mem, csr_len);
denali_hw_init(denali); denali_hw_init(denali);
denali_drv_init(denali); denali_drv_init(denali);
nand_dbg_print(NAND_DBG_DEBUG, "Spectra: IRQ %d\n", dev->irq);
if (request_irq(dev->irq, denali_isr, IRQF_SHARED, if (request_irq(dev->irq, denali_isr, IRQF_SHARED,
DENALI_NAND_NAME, denali)) { DENALI_NAND_NAME, denali)) {
printk(KERN_ERR "Spectra: Unable to allocate IRQ\n"); printk(KERN_ERR "Spectra: Unable to allocate IRQ\n");
@ -1635,18 +1526,6 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
denali_nand_timing_set(denali); denali_nand_timing_set(denali);
nand_dbg_print(NAND_DBG_DEBUG, "Dump timing register values:"
"acc_clks: %d, re_2_we: %d, we_2_re: %d,"
"addr_2_data: %d, rdwr_en_lo_cnt: %d, "
"rdwr_en_hi_cnt: %d, cs_setup_cnt: %d\n",
ioread32(denali->flash_reg + ACC_CLKS),
ioread32(denali->flash_reg + RE_2_WE),
ioread32(denali->flash_reg + WE_2_RE),
ioread32(denali->flash_reg + ADDR_2_DATA),
ioread32(denali->flash_reg + RDWR_EN_LO_CNT),
ioread32(denali->flash_reg + RDWR_EN_HI_CNT),
ioread32(denali->flash_reg + CS_SETUP_CNT));
denali->mtd.name = "Denali NAND"; denali->mtd.name = "Denali NAND";
denali->mtd.owner = THIS_MODULE; denali->mtd.owner = THIS_MODULE;
denali->mtd.priv = &denali->nand; denali->mtd.priv = &denali->nand;
@ -1772,8 +1651,8 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
ret = add_mtd_device(&denali->mtd); ret = add_mtd_device(&denali->mtd);
if (ret) { if (ret) {
printk(KERN_ERR "Spectra: Failed to register" dev_err(&dev->dev, "Spectra: Failed to register MTD: %d\n",
" MTD device: %d\n", ret); ret);
goto failed_req_irq; goto failed_req_irq;
} }
return 0; return 0;
@ -1801,9 +1680,6 @@ static void denali_pci_remove(struct pci_dev *dev)
{ {
struct denali_nand_info *denali = pci_get_drvdata(dev); struct denali_nand_info *denali = pci_get_drvdata(dev);
nand_dbg_print(NAND_DBG_WARN, "%s, Line %d, Function: %s\n",
__FILE__, __LINE__, __func__);
nand_release(&denali->mtd); nand_release(&denali->mtd);
del_mtd_device(&denali->mtd); del_mtd_device(&denali->mtd);

18
drivers/mtd/nand/denali.h
View File

@ -635,24 +635,6 @@
#define CLK_X 5 #define CLK_X 5
#define CLK_MULTI 4 #define CLK_MULTI 4
/* ffsport.h */
#define VERBOSE 1
#define NAND_DBG_WARN 1
#define NAND_DBG_DEBUG 2
#define NAND_DBG_TRACE 3
#ifdef VERBOSE
#define nand_dbg_print(level, args...) \
do { \
if (level <= nand_debug_level) \
printk(KERN_ALERT args); \
} while (0)
#else
#define nand_dbg_print(level, args...)
#endif
/* spectraswconfig.h */ /* spectraswconfig.h */
#define CMD_DMA 0 #define CMD_DMA 0