leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Merge remote-tracking branch 'clk/clk-for-3.10' into sunxi/core-for-3.10

Browse Source
This commit is contained in:
Maxime Ripard 2013-04-08 21:39:22 +02:00
commit 7c91d302ff
384 changed files with 4426 additions and 1829 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

56
Documentation/arm/sunxi/clocks.txt Normal file
View File

@ -0,0 +1,56 @@
Frequently asked questions about the sunxi clock system
=======================================================
This document contains useful bits of information that people tend to ask
about the sunxi clock system, as well as accompanying ASCII art when adequate.
Q: Why is the main 24MHz oscillator gatable? Wouldn't that break the
system?
A: The 24MHz oscillator allows gating to save power. Indeed, if gated
carelessly the system would stop functioning, but with the right
steps, one can gate it and keep the system running. Consider this
simplified suspend example:
While the system is operational, you would see something like
24MHz 32kHz
|
PLL1
\
\_ CPU Mux
|
[CPU]
When you are about to suspend, you switch the CPU Mux to the 32kHz
oscillator:
24Mhz 32kHz
| |
PLL1 |
/
CPU Mux _/
|
[CPU]
Finally you can gate the main oscillator
32kHz
|
|
/
CPU Mux _/
|
[CPU]
Q: Were can I learn more about the sunxi clocks?
A: The linux-sunxi wiki contains a page documenting the clock registers,
you can find it at
http://linux-sunxi.org/A10/CCM
The authoritative source for information at this time is the ccmu driver
released by Allwinner, you can find it at
https://github.com/linux-sunxi/linux-sunxi/tree/sunxi-3.0/arch/arm/mach-sun4i/clock/ccmu

4
Documentation/clk.txt
View File

@ -174,9 +174,9 @@ int clk_foo_enable(struct clk_hw *hw)
};
Below is a matrix detailing which clk_ops are mandatory based upon the
hardware capbilities of that clock. A cell marked as "y" means
hardware capabilities of that clock. A cell marked as "y" means
mandatory, a cell marked as "n" implies that either including that
callback is invalid or otherwise uneccesary. Empty cells are either
callback is invalid or otherwise unnecessary. Empty cells are either
optional or must be evaluated on a case-by-case basis.
clock hardware characteristics

22
Documentation/devicetree/bindings/clock/axi-clkgen.txt Normal file
View File

@ -0,0 +1,22 @@
Binding for the axi-clkgen clock generator
This binding uses the common clock binding[1].
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
Required properties:
- compatible : shall be "adi,axi-clkgen".
- #clock-cells : from common clock binding; Should always be set to 0.
- reg : Address and length of the axi-clkgen register set.
- clocks : Phandle and clock specifier for the parent clock.
Optional properties:
- clock-output-names : From common clock binding.
Example:
clock@0xff000000 {
compatible = "adi,axi-clkgen";
#clock-cells = <0>;
reg = <0xff000000 0x1000>;
clocks = <&osc 1>;
};

151
Documentation/devicetree/bindings/clock/sunxi.txt Normal file
View File

@ -0,0 +1,151 @@
Device Tree Clock bindings for arch-sunxi
This binding uses the common clock binding[1].
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
Required properties:
- compatible : shall be one of the following:
"allwinner,sun4i-osc-clk" - for a gatable oscillator
"allwinner,sun4i-pll1-clk" - for the main PLL clock
"allwinner,sun4i-cpu-clk" - for the CPU multiplexer clock
"allwinner,sun4i-axi-clk" - for the AXI clock
"allwinner,sun4i-axi-gates-clk" - for the AXI gates
"allwinner,sun4i-ahb-clk" - for the AHB clock
"allwinner,sun4i-ahb-gates-clk" - for the AHB gates
"allwinner,sun4i-apb0-clk" - for the APB0 clock
"allwinner,sun4i-apb0-gates-clk" - for the APB0 gates
"allwinner,sun4i-apb1-clk" - for the APB1 clock
"allwinner,sun4i-apb1-mux-clk" - for the APB1 clock muxing
"allwinner,sun4i-apb1-gates-clk" - for the APB1 gates
Required properties for all clocks:
- reg : shall be the control register address for the clock.
- clocks : shall be the input parent clock(s) phandle for the clock
- #clock-cells : from common clock binding; shall be set to 0 except for
"allwinner,sun4i-*-gates-clk" where it shall be set to 1
Additionally, "allwinner,sun4i-*-gates-clk" clocks require:
- clock-output-names : the corresponding gate names that the clock controls
For example:
osc24M: osc24M@01c20050 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-osc-clk";
reg = <0x01c20050 0x4>;
clocks = <&osc24M_fixed>;
};
pll1: pll1@01c20000 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-pll1-clk";
reg = <0x01c20000 0x4>;
clocks = <&osc24M>;
};
cpu: cpu@01c20054 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-cpu-clk";
reg = <0x01c20054 0x4>;
clocks = <&osc32k>, <&osc24M>, <&pll1>;
};
Gate clock outputs
The "allwinner,sun4i-*-gates-clk" clocks provide several gatable outputs;
their corresponding offsets as present on sun4i are listed below. Note that
some of these gates are not present on sun5i.
* AXI gates ("allwinner,sun4i-axi-gates-clk")
DRAM 0
* AHB gates ("allwinner,sun4i-ahb-gates-clk")
USB0 0
EHCI0 1
OHCI0 2*
EHCI1 3
OHCI1 4*
SS 5
DMA 6
BIST 7
MMC0 8
MMC1 9
MMC2 10
MMC3 11
MS 12**
NAND 13
SDRAM 14
ACE 16
EMAC 17
TS 18
SPI0 20
SPI1 21
SPI2 22
SPI3 23
PATA 24
SATA 25**
GPS 26*
VE 32
TVD 33
TVE0 34
TVE1 35
LCD0 36
LCD1 37
CSI0 40
CSI1 41
HDMI 43
DE_BE0 44
DE_BE1 45
DE_FE0 46
DE_FE1 47
MP 50
MALI400 52
* APB0 gates ("allwinner,sun4i-apb0-gates-clk")
CODEC 0
SPDIF 1*
AC97 2
IIS 3
PIO 5
IR0 6
IR1 7
KEYPAD 10
* APB1 gates ("allwinner,sun4i-apb1-gates-clk")
I2C0 0
I2C1 1
I2C2 2
CAN 4
SCR 5
PS20 6
PS21 7
UART0 16
UART1 17
UART2 18
UART3 19
UART4 20
UART5 21
UART6 22
UART7 23
Notation:
[*]: The datasheet didn't mention these, but they are present on AW code
[**]: The datasheet had this marked as "NC" but they are used on AW code

6
Documentation/devicetree/bindings/mfd/ab8500.txt
View File

@ -13,9 +13,6 @@ Required parent device properties:
4 = active high level-sensitive
8 = active low level-sensitive
Optional parent device properties:
- reg : contains the PRCMU mailbox address for the AB8500 i2c port
The AB8500 consists of a large and varied group of sub-devices:
Device IRQ Names Supply Names Description
@ -86,9 +83,8 @@ Non-standard child device properties:
- stericsson,amic2-bias-vamic1 : Analoge Mic wishes to use a non-standard Vamic
- stericsson,earpeice-cmv : Earpeice voltage (only: 950 | 1100 | 1270 | 1580)
ab8500@5 {
ab8500 {
compatible = "stericsson,ab8500";
reg = <5>; /* mailbox 5 is i2c */
interrupts = <0 40 0x4>;
interrupt-controller;
#interrupt-cells = <2>;

3
Documentation/devicetree/bindings/tty/serial/of-serial.txt
View File

@ -11,6 +11,9 @@ Required properties:
- "nvidia,tegra20-uart"
- "nxp,lpc3220-uart"
- "ibm,qpace-nwp-serial"
- "altr,16550-FIFO32"
- "altr,16550-FIFO64"
- "altr,16550-FIFO128"
- "serial" if the port type is unknown.
- reg : offset and length of the register set for the device.
- interrupts : should contain uart interrupt.

65
Documentation/input/alps.txt
View File

@ -3,10 +3,26 @@ ALPS Touchpad Protocol
Introduction
------------
Currently the ALPS touchpad driver supports five protocol versions in use by
ALPS touchpads, called versions 1, 2, 3, 4 and 5.
Currently the ALPS touchpad driver supports four protocol versions in use by
ALPS touchpads, called versions 1, 2, 3, and 4. Information about the various
protocol versions is contained in the following sections.
Since roughly mid-2010 several new ALPS touchpads have been released and
integrated into a variety of laptops and netbooks. These new touchpads
have enough behavior differences that the alps_model_data definition
table, describing the properties of the different versions, is no longer
adequate. The design choices were to re-define the alps_model_data
table, with the risk of regression testing existing devices, or isolate
the new devices outside of the alps_model_data table. The latter design
choice was made. The new touchpad signatures are named: "Rushmore",
"Pinnacle", and "Dolphin", which you will see in the alps.c code.
For the purposes of this document, this group of ALPS touchpads will
generically be called "new ALPS touchpads".
We experimented with probing the ACPI interface _HID (Hardware ID)/_CID
(Compatibility ID) definition as a way to uniquely identify the
different ALPS variants but there did not appear to be a 1:1 mapping.
In fact, it appeared to be an m:n mapping between the _HID and actual
hardware type.
Detection
---------
@ -20,9 +36,13 @@ If the E6 report is successful, the touchpad model is identified using the "E7
report" sequence: E8-E7-E7-E7-E9. The response is the model signature and is
matched against known models in the alps_model_data_array.
With protocol versions 3 and 4, the E7 report model signature is always
73-02-64. To differentiate between these versions, the response from the
"Enter Command Mode" sequence must be inspected as described below.
For older touchpads supporting protocol versions 3 and 4, the E7 report
model signature is always 73-02-64. To differentiate between these
versions, the response from the "Enter Command Mode" sequence must be
inspected as described below.
The new ALPS touchpads have an E7 signature of 73-03-50 or 73-03-0A but
seem to be better differentiated by the EC Command Mode response.
Command Mode
------------
@ -47,6 +67,14 @@ address of the register being read, and the third contains the value of the
register. Registers are written by writing the value one nibble at a time
using the same encoding used for addresses.
For the new ALPS touchpads, the EC command is used to enter command
mode. The response in the new ALPS touchpads is significantly different,
and more important in determining the behavior. This code has been
separated from the original alps_model_data table and put in the
alps_identify function. For example, there seem to be two hardware init
sequences for the "Dolphin" touchpads as determined by the second byte
of the EC response.
Packet Format
-------------
@ -187,3 +215,28 @@ There are several things worth noting here.
well.
So far no v4 devices with tracksticks have been encountered.
ALPS Absolute Mode - Protocol Version 5
---------------------------------------
This is basically Protocol Version 3 but with different logic for packet
decode. It uses the same alps_process_touchpad_packet_v3 call with a
specialized decode_fields function pointer to correctly interpret the
packets. This appears to only be used by the Dolphin devices.
For single-touch, the 6-byte packet format is:
byte 0: 1 1 0 0 1 0 0 0
byte 1: 0 x6 x5 x4 x3 x2 x1 x0
byte 2: 0 y6 y5 y4 y3 y2 y1 y0
byte 3: 0 M R L 1 m r l
byte 4: y10 y9 y8 y7 x10 x9 x8 x7
byte 5: 0 z6 z5 z4 z3 z2 z1 z0
For mt, the format is:
byte 0: 1 1 1 n3 1 n2 n1 x24
byte 1: 1 y7 y6 y5 y4 y3 y2 y1
byte 2: ? x2 x1 y12 y11 y10 y9 y8
byte 3: 0 x23 x22 x21 x20 x19 x18 x17
byte 4: 0 x9 x8 x7 x6 x5 x4 x3
byte 5: 0 x16 x15 x14 x13 x12 x11 x10

77
Documentation/networking/tuntap.txt
View File

@ -105,6 +105,83 @@ Copyright (C) 1999-2000 Maxim Krasnyansky <max_mk@yahoo.com>
Proto [2 bytes]
Raw protocol(IP, IPv6, etc) frame.
3.3 Multiqueue tuntap interface:
From version 3.8, Linux supports multiqueue tuntap which can uses multiple
file descriptors (queues) to parallelize packets sending or receiving. The
device allocation is the same as before, and if user wants to create multiple
queues, TUNSETIFF with the same device name must be called many times with
IFF_MULTI_QUEUE flag.
char *dev should be the name of the device, queues is the number of queues to
be created, fds is used to store and return the file descriptors (queues)
created to the caller. Each file descriptor were served as the interface of a
queue which could be accessed by userspace.
#include <linux/if.h>
#include <linux/if_tun.h>
int tun_alloc_mq(char *dev, int queues, int *fds)
{
struct ifreq ifr;
int fd, err, i;
if (!dev)
return -1;
memset(&ifr, 0, sizeof(ifr));
/* Flags: IFF_TUN - TUN device (no Ethernet headers)
* IFF_TAP - TAP device
*
* IFF_NO_PI - Do not provide packet information
* IFF_MULTI_QUEUE - Create a queue of multiqueue device
*/
ifr.ifr_flags = IFF_TAP | IFF_NO_PI | IFF_MULTI_QUEUE;
strcpy(ifr.ifr_name, dev);
for (i = 0; i < queues; i++) {
if ((fd = open("/dev/net/tun", O_RDWR)) < 0)
goto err;
err = ioctl(fd, TUNSETIFF, (void *)&ifr);
if (err) {
close(fd);
goto err;
}
fds[i] = fd;
}
return 0;
err:
for (--i; i >= 0; i--)
close(fds[i]);
return err;
}
A new ioctl(TUNSETQUEUE) were introduced to enable or disable a queue. When
calling it with IFF_DETACH_QUEUE flag, the queue were disabled. And when
calling it with IFF_ATTACH_QUEUE flag, the queue were enabled. The queue were
enabled by default after it was created through TUNSETIFF.
fd is the file descriptor (queue) that we want to enable or disable, when
enable is true we enable it, otherwise we disable it
#include <linux/if.h>
#include <linux/if_tun.h>
int tun_set_queue(int fd, int enable)
{
struct ifreq ifr;
memset(&ifr, 0, sizeof(ifr));
if (enable)
ifr.ifr_flags = IFF_ATTACH_QUEUE;
else
ifr.ifr_flags = IFF_DETACH_QUEUE;
return ioctl(fd, TUNSETQUEUE, (void *)&ifr);
}
Universal TUN/TAP device driver Frequently Asked Question.
1. What platforms are supported by TUN/TAP driver ?

2
Documentation/trace/ftrace.txt
View File

@ -1873,7 +1873,7 @@ feature:
status\input | 0 | 1 | else |
--------------+------------+------------+------------+
not allocated |(do nothing)| alloc+swap | EINVAL |
not allocated |(do nothing)| alloc+swap |(do nothing)|
--------------+------------+------------+------------+
allocated | free | swap | clear |
--------------+------------+------------+------------+

27
MAINTAINERS
View File

@ -4005,6 +4005,22 @@ M: Stanislaw Gruszka <stf_xl@wp.pl>
S: Maintained
F: drivers/usb/atm/ueagle-atm.c
INA209 HARDWARE MONITOR DRIVER
M: Guenter Roeck <linux@roeck-us.net>
L: lm-sensors@lm-sensors.org
S: Maintained
F: Documentation/hwmon/ina209
F: Documentation/devicetree/bindings/i2c/ina209.txt
F: drivers/hwmon/ina209.c
INA2XX HARDWARE MONITOR DRIVER
M: Guenter Roeck <linux@roeck-us.net>
L: lm-sensors@lm-sensors.org
S: Maintained
F: Documentation/hwmon/ina2xx
F: drivers/hwmon/ina2xx.c
F: include/linux/platform_data/ina2xx.h
INDUSTRY PACK SUBSYSTEM (IPACK)
M: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
M: Jens Taprogge <jens.taprogge@taprogge.org>
@ -5098,6 +5114,15 @@ S: Maintained
F: Documentation/hwmon/max6650
F: drivers/hwmon/max6650.c
MAX6697 HARDWARE MONITOR DRIVER
M: Guenter Roeck <linux@roeck-us.net>
L: lm-sensors@lm-sensors.org
S: Maintained
F: Documentation/hwmon/max6697
F: Documentation/devicetree/bindings/i2c/max6697.txt
F: drivers/hwmon/max6697.c
F: include/linux/platform_data/max6697.h
MAXIRADIO FM RADIO RECEIVER DRIVER
M: Hans Verkuil <hverkuil@xs4all.nl>
L: linux-media@vger.kernel.org
@ -6412,6 +6437,8 @@ F: Documentation/networking/LICENSE.qla3xxx
F: drivers/net/ethernet/qlogic/qla3xxx.*
QLOGIC QLCNIC (1/10)Gb ETHERNET DRIVER
M: Rajesh Borundia <rajesh.borundia@qlogic.com>
M: Shahed Shaikh <shahed.shaikh@qlogic.com>
M: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
M: Sony Chacko <sony.chacko@qlogic.com>
M: linux-driver@qlogic.com

2
Makefile
View File

@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 9
SUBLEVEL = 0
EXTRAVERSION = -rc2
EXTRAVERSION = -rc3
NAME = Unicycling Gorilla
# *DOCUMENTATION*

7
arch/Kconfig
View File

@ -319,13 +319,6 @@ config ARCH_WANT_OLD_COMPAT_IPC
select ARCH_WANT_COMPAT_IPC_PARSE_VERSION
bool
config HAVE_VIRT_TO_BUS
bool
help
An architecture should select this if it implements the
deprecated interface virt_to_bus(). All new architectures
should probably not select this.
config HAVE_ARCH_SECCOMP_FILTER
bool
help

2
arch/alpha/Kconfig
View File

@ -9,7 +9,7 @@ config ALPHA
select HAVE_PERF_EVENTS
select HAVE_DMA_ATTRS
select HAVE_GENERIC_HARDIRQS
select HAVE_VIRT_TO_BUS
select VIRT_TO_BUS
select GENERIC_IRQ_PROBE
select AUTO_IRQ_AFFINITY if SMP
select GENERIC_IRQ_SHOW

13
arch/arm/Kconfig
View File

@ -49,7 +49,7 @@ config ARM
select HAVE_REGS_AND_STACK_ACCESS_API
select HAVE_SYSCALL_TRACEPOINTS
select HAVE_UID16
select HAVE_VIRT_TO_BUS
select VIRT_TO_BUS
select KTIME_SCALAR
select PERF_USE_VMALLOC
select RTC_LIB
@ -556,7 +556,6 @@ config ARCH_IXP4XX
config ARCH_DOVE
bool "Marvell Dove"
select ARCH_REQUIRE_GPIOLIB
select COMMON_CLK_DOVE
select CPU_V7
select GENERIC_CLOCKEVENTS
select MIGHT_HAVE_PCI
@ -1658,13 +1657,16 @@ config LOCAL_TIMERS
accounting to be spread across the timer interval, preventing a
"thundering herd" at every timer tick.
# The GPIO number here must be sorted by descending number. In case of
# a multiplatform kernel, we just want the highest value required by the
# selected platforms.
config ARCH_NR_GPIO
int
default 1024 if ARCH_SHMOBILE || ARCH_TEGRA
default 355 if ARCH_U8500
default 264 if MACH_H4700
default 512 if SOC_OMAP5
default 355 if ARCH_U8500
default 288 if ARCH_VT8500 || ARCH_SUNXI
default 264 if MACH_H4700
default 0
help
Maximum number of GPIOs in the system.
@ -1888,8 +1890,9 @@ config XEN_DOM0
config XEN
bool "Xen guest support on ARM (EXPERIMENTAL)"
depends on ARM && OF
depends on ARM && AEABI && OF
depends on CPU_V7 && !CPU_V6
depends on !GENERIC_ATOMIC64
help
Say Y if you want to run Linux in a Virtual Machine on Xen on ARM.

2
arch/arm/Kconfig.debug
View File

@ -492,7 +492,7 @@ config DEBUG_IMX_UART_PORT
DEBUG_IMX31_UART || \
DEBUG_IMX35_UART || \
DEBUG_IMX51_UART || \
DEBUG_IMX50_IMX53_UART || \
DEBUG_IMX53_UART || \
DEBUG_IMX6Q_UART
default 1
help

2
arch/arm/boot/Makefile
View File

@ -115,4 +115,4 @@ i:
$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
$(obj)/Image System.map "$(INSTALL_PATH)"
subdir- := bootp compressed
subdir- := bootp compressed dts

8
arch/arm/boot/dts/armada-370-rd.dts
View File

@ -64,5 +64,13 @@
status = "okay";
/* No CD or WP GPIOs */
};
usb@d0050000 {
status = "okay";
};
usb@d0051000 {
status = "okay";
};
};
};

5
arch/arm/boot/dts/armada-370-xp.dtsi
View File

@ -31,7 +31,6 @@
mpic: interrupt-controller@d0020000 {
compatible = "marvell,mpic";
#interrupt-cells = <1>;
#address-cells = <1>;
#size-cells = <1>;
interrupt-controller;
};
@ -54,7 +53,7 @@
reg = <0xd0012000 0x100>;
reg-shift = <2>;
interrupts = <41>;
reg-io-width = <4>;
reg-io-width = <1>;
status = "disabled";
};
serial@d0012100 {
@ -62,7 +61,7 @@
reg = <0xd0012100 0x100>;
reg-shift = <2>;
interrupts = <42>;
reg-io-width = <4>;
reg-io-width = <1>;
status = "disabled";
};

4
arch/arm/boot/dts/armada-xp.dtsi
View File

@ -46,7 +46,7 @@
reg = <0xd0012200 0x100>;
reg-shift = <2>;
interrupts = <43>;
reg-io-width = <4>;
reg-io-width = <1>;
status = "disabled";
};
serial@d0012300 {
@ -54,7 +54,7 @@
reg = <0xd0012300 0x100>;
reg-shift = <2>;
interrupts = <44>;
reg-io-width = <4>;
reg-io-width = <1>;
status = "disabled";
};

2
arch/arm/boot/dts/bcm2835.dtsi
View File

@ -105,7 +105,7 @@
compatible = "fixed-clock";
reg = <1>;
#clock-cells = <0>;
clock-frequency = <150000000>;
clock-frequency = <250000000>;
};
};
};

3
arch/arm/boot/dts/dbx5x0.dtsi
View File

@ -319,9 +319,8 @@
};
};
ab8500@5 {
ab8500 {
compatible = "stericsson,ab8500";
reg = <5>; /* mailbox 5 is i2c */
interrupt-parent = <&intc>;
interrupts = <0 40 0x4>;
interrupt-controller;

5
arch/arm/boot/dts/dove.dtsi
View File

@ -197,6 +197,11 @@
status = "disabled";
};
rtc@d8500 {
compatible = "marvell,orion-rtc";
reg = <0xd8500 0x20>;
};
crypto: crypto@30000 {
compatible = "marvell,orion-crypto";
reg = <0x30000 0x10000>,

2
arch/arm/boot/dts/href.dtsi
View File

@ -221,7 +221,7 @@
};
};
ab8500@5 {
ab8500 {
ab8500-regulators {
ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
regulator-name = "V-DISPLAY";

2
arch/arm/boot/dts/hrefv60plus.dts
View File

@ -158,7 +158,7 @@
};
};
ab8500@5 {
ab8500 {
ab8500-regulators {
ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
regulator-name = "V-DISPLAY";

3
arch/arm/boot/dts/imx53-mba53.dts
View File

@ -42,10 +42,9 @@
fsl,pins = <689 0x10000 /* DISP1_DRDY */
482 0x10000 /* DISP1_HSYNC */
489 0x10000 /* DISP1_VSYNC */
684 0x10000 /* DISP1_DAT_0 */
515 0x10000 /* DISP1_DAT_22 */
523 0x10000 /* DISP1_DAT_23 */
543 0x10000 /* DISP1_DAT_21 */
545 0x10000 /* DISP1_DAT_21 */
553 0x10000 /* DISP1_DAT_20 */
558 0x10000 /* DISP1_DAT_19 */
564 0x10000 /* DISP1_DAT_18 */

2
arch/arm/boot/dts/kirkwood-dns320.dts
View File

@ -42,12 +42,10 @@
ocp@f1000000 {
serial@12000 {
clock-frequency = <166666667>;
status = "okay";
};
serial@12100 {
clock-frequency = <166666667>;
status = "okay";
};
};

1
arch/arm/boot/dts/kirkwood-dns325.dts
View File

@ -50,7 +50,6 @@
};
};
serial@12000 {
clock-frequency = <200000000>;
status = "okay";
};
};

1
arch/arm/boot/dts/kirkwood-dockstar.dts
View File

@ -37,7 +37,6 @@
};
};
serial@12000 {
clock-frequency = <200000000>;
status = "ok";
};

1
arch/arm/boot/dts/kirkwood-dreamplug.dts
View File

@ -38,7 +38,6 @@
};
};
serial@12000 {
clock-frequency = <200000000>;
status = "ok";
};

1
arch/arm/boot/dts/kirkwood-goflexnet.dts
View File

@ -73,7 +73,6 @@
};
};
serial@12000 {
clock-frequency = <200000000>;
status = "ok";
};

1
arch/arm/boot/dts/kirkwood-ib62x0.dts
View File

@ -51,7 +51,6 @@
};
};
serial@12000 {
clock-frequency = <200000000>;
status = "okay";
};

1
arch/arm/boot/dts/kirkwood-iconnect.dts
View File

@ -78,7 +78,6 @@
};
};
serial@12000 {
clock-frequency = <200000000>;
status = "ok";
};

1
arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
View File

@ -115,7 +115,6 @@
};
serial@12000 {
clock-frequency = <200000000>;
status = "ok";
};

1
arch/arm/boot/dts/kirkwood-km_kirkwood.dts
View File

@ -34,7 +34,6 @@
};
serial@12000 {
clock-frequency = <200000000>;
status = "ok";
};

1
arch/arm/boot/dts/kirkwood-lschlv2.dts
View File

@ -13,7 +13,6 @@
ocp@f1000000 {
serial@12000 {
clock-frequency = <166666667>;
status = "okay";
};
};

1
arch/arm/boot/dts/kirkwood-lsxhl.dts
View File

@ -13,7 +13,6 @@
ocp@f1000000 {
serial@12000 {
clock-frequency = <200000000>;
status = "okay";
};
};

1
arch/arm/boot/dts/kirkwood-mplcec4.dts
View File

@ -90,7 +90,6 @@
};
serial@12000 {
clock-frequency = <200000000>;
status = "ok";
};

1
arch/arm/boot/dts/kirkwood-ns2-common.dtsi
View File

@ -23,7 +23,6 @@
};
serial@12000 {
clock-frequency = <166666667>;
status = "okay";
};

1
arch/arm/boot/dts/kirkwood-nsa310.dts
View File

@ -117,7 +117,6 @@
};
serial@12000 {
clock-frequency = <200000000>;
status = "ok";
};

2
arch/arm/boot/dts/kirkwood-openblocks_a6.dts
View File

@ -18,12 +18,10 @@
ocp@f1000000 {
serial@12000 {
clock-frequency = <200000000>;
status = "ok";
};
serial@12100 {
clock-frequency = <200000000>;
status = "ok";
};

1
arch/arm/boot/dts/kirkwood-topkick.dts
View File

@ -108,7 +108,6 @@
};
serial@12000 {
clock-frequency = <200000000>;
status = "ok";
};

5
arch/arm/boot/dts/kirkwood.dtsi
View File

@ -38,6 +38,7 @@
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <35>, <36>, <37>, <38>;
clocks = <&gate_clk 7>;
};
gpio1: gpio@10140 {
@ -49,6 +50,7 @@
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <39>, <40>, <41>;
clocks = <&gate_clk 7>;
};
serial@12000 {
@ -57,7 +59,6 @@
reg-shift = <2>;
interrupts = <33>;
clocks = <&gate_clk 7>;
/* set clock-frequency in board dts */
status = "disabled";
};
@ -67,7 +68,6 @@
reg-shift = <2>;
interrupts = <34>;
clocks = <&gate_clk 7>;
/* set clock-frequency in board dts */
status = "disabled";
};
@ -75,6 +75,7 @@
compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
reg = <0x10300 0x20>;
interrupts = <53>;
clocks = <&gate_clk 7>;
};
spi@10600 {

2
arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts
View File

@ -11,7 +11,7 @@
/ {
model = "LaCie Ethernet Disk mini V2";
compatible = "lacie,ethernet-disk-mini-v2", "marvell-orion5x-88f5182", "marvell,orion5x";
compatible = "lacie,ethernet-disk-mini-v2", "marvell,orion5x-88f5182", "marvell,orion5x";
memory {
reg = <0x00000000 0x4000000>; /* 64 MB */

2
arch/arm/boot/dts/snowball.dts
View File

@ -298,7 +298,7 @@
};
};
ab8500@5 {
ab8500 {
ab8500-regulators {
ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
regulator-name = "V-DISPLAY";

3
arch/arm/boot/dts/socfpga.dtsi
View File

@ -75,6 +75,9 @@
compatible = "arm,pl330", "arm,primecell";
reg = <0xffe01000 0x1000>;
interrupts = <0 180 4>;
#dma-cells = <1>;
#dma-channels = <8>;
#dma-requests = <32>;
};
};

1
arch/arm/boot/dts/tegra20.dtsi
View File

@ -118,6 +118,7 @@
compatible = "arm,cortex-a9-twd-timer";
reg = <0x50040600 0x20>;
interrupts = <1 13 0x304>;
clocks = <&tegra_car 132>;
};
intc: interrupt-controller {

1
arch/arm/boot/dts/tegra30.dtsi
View File

@ -119,6 +119,7 @@
compatible = "arm,cortex-a9-twd-timer";
reg = <0x50040600 0x20>;
interrupts = <1 13 0xf04>;
clocks = <&tegra_car 214>;
};
intc: interrupt-controller {

1
arch/arm/configs/mxs_defconfig
View File

@ -116,6 +116,7 @@ CONFIG_SND_SOC=y
CONFIG_SND_MXS_SOC=y
CONFIG_SND_SOC_MXS_SGTL5000=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_CHIPIDEA=y
CONFIG_USB_CHIPIDEA_HOST=y
CONFIG_USB_STORAGE=y

2
arch/arm/configs/omap2plus_defconfig
View File

@ -126,6 +126,8 @@ CONFIG_INPUT_MISC=y
CONFIG_INPUT_TWL4030_PWRBUTTON=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y

25
arch/arm/include/asm/xen/events.h
View File

@ -2,6 +2,7 @@
#define _ASM_ARM_XEN_EVENTS_H
#include <asm/ptrace.h>
#include <asm/atomic.h>
enum ipi_vector {
XEN_PLACEHOLDER_VECTOR,
@ -15,26 +16,8 @@ static inline int xen_irqs_disabled(struct pt_regs *regs)
return raw_irqs_disabled_flags(regs->ARM_cpsr);
}
/*
* We cannot use xchg because it does not support 8-byte
* values. However it is safe to use {ldr,dtd}exd directly because all
* platforms which Xen can run on support those instructions.
*/
static inline xen_ulong_t xchg_xen_ulong(xen_ulong_t *ptr, xen_ulong_t val)
{
xen_ulong_t oldval;
unsigned int tmp;
wmb();
asm volatile("@ xchg_xen_ulong\n"
"1: ldrexd %0, %H0, [%3]\n"
" strexd %1, %2, %H2, [%3]\n"
" teq %1, #0\n"
" bne 1b"
: "=&r" (oldval), "=&r" (tmp)
: "r" (val), "r" (ptr)
: "memory", "cc");
return oldval;
}
#define xchg_xen_ulong(ptr, val) atomic64_xchg(container_of((ptr), \
atomic64_t, \
counter), (val))
#endif /* _ASM_ARM_XEN_EVENTS_H */

1
arch/arm/mach-at91/board-foxg20.c
View File

@ -176,6 +176,7 @@ static struct w1_gpio_platform_data w1_gpio_pdata = {
/* If you choose to use a pin other than PB16 it needs to be 3.3V */
.pin = AT91_PIN_PB16,
.is_open_drain = 1,
.ext_pullup_enable_pin = -EINVAL,
};
static struct platform_device w1_device = {

1
arch/arm/mach-at91/board-stamp9g20.c
View File

@ -188,6 +188,7 @@ static struct spi_board_info portuxg20_spi_devices[] = {
static struct w1_gpio_platform_data w1_gpio_pdata = {
.pin = AT91_PIN_PA29,
.is_open_drain = 1,
.ext_pullup_enable_pin = -EINVAL,
};
static struct platform_device w1_device = {

2
arch/arm/mach-imx/clk-busy.c
View File

@ -169,7 +169,7 @@ struct clk *imx_clk_busy_mux(const char *name, void __iomem *reg, u8 shift,
busy->mux.reg = reg;
busy->mux.shift = shift;
busy->mux.width = width;
busy->mux.mask = BIT(width) - 1;
busy->mux.lock = &imx_ccm_lock;
busy->mux_ops = &clk_mux_ops;

2
arch/arm/mach-imx/clk-imx6q.c
View File

@ -172,7 +172,7 @@ static struct clk *clk[clk_max];
static struct clk_onecell_data clk_data;
static enum mx6q_clks const clks_init_on[] __initconst = {
mmdc_ch0_axi, rom,
mmdc_ch0_axi, rom, pll1_sys,
};
static struct clk_div_table clk_enet_ref_table[] = {

18
arch/arm/mach-imx/headsmp.S
View File

@ -26,16 +26,16 @@ ENDPROC(v7_secondary_startup)
#ifdef CONFIG_PM
/*
* The following code is located into the .data section. This is to
* allow phys_l2x0_saved_regs to be accessed with a relative load
* as we are running on physical address here.
* The following code must assume it is running from physical address
* where absolute virtual addresses to the data section have to be
* turned into relative ones.
*/
.data
.align
#ifdef CONFIG_CACHE_L2X0
.macro pl310_resume
ldr r2, phys_l2x0_saved_regs
adr r0, l2x0_saved_regs_offset
ldr r2, [r0]
add r2, r2, r0
ldr r0, [r2, #L2X0_R_PHY_BASE] @ get physical base of l2x0
ldr r1, [r2, #L2X0_R_AUX_CTRL] @ get aux_ctrl value
str r1, [r0, #L2X0_AUX_CTRL] @ restore aux_ctrl
@ -43,9 +43,9 @@ ENDPROC(v7_secondary_startup)
str r1, [r0, #L2X0_CTRL] @ re-enable L2
.endm
.globl phys_l2x0_saved_regs
phys_l2x0_saved_regs:
.long 0
l2x0_saved_regs_offset:
.word l2x0_saved_regs - .
#else
.macro pl310_resume
.endm

15
arch/arm/mach-imx/pm-imx6q.c
View File

@ -22,8 +22,6 @@
#include "common.h"
#include "hardware.h"
extern unsigned long phys_l2x0_saved_regs;
static int imx6q_suspend_finish(unsigned long val)
{
cpu_do_idle();
@ -57,18 +55,5 @@ static const struct platform_suspend_ops imx6q_pm_ops = {
void __init imx6q_pm_init(void)
{
/*
* The l2x0 core code provides an infrastucture to save and restore
* l2x0 registers across suspend/resume cycle. But because imx6q
* retains L2 content during suspend and needs to resume L2 before
* MMU is enabled, it can only utilize register saving support and
* have to take care of restoring on its own. So we save physical
* address of the data structure used by l2x0 core to save registers,
* and later restore the necessary ones in imx6q resume entry.
*/
#ifdef CONFIG_CACHE_L2X0
phys_l2x0_saved_regs = __pa(&l2x0_saved_regs);
#endif
suspend_set_ops(&imx6q_pm_ops);
}

1
arch/arm/mach-ixp4xx/vulcan-setup.c
View File

@ -163,6 +163,7 @@ static struct platform_device vulcan_max6369 = {
static struct w1_gpio_platform_data vulcan_w1_gpio_pdata = {
.pin = 14,
.ext_pullup_enable_pin = -EINVAL,
};
static struct platform_device vulcan_w1_gpio = {

25
arch/arm/mach-kirkwood/board-dt.c
View File

@ -41,16 +41,12 @@ static void __init kirkwood_legacy_clk_init(void)
struct device_node *np = of_find_compatible_node(
NULL, NULL, "marvell,kirkwood-gating-clock");
struct of_phandle_args clkspec;
struct clk *clk;
clkspec.np = np;
clkspec.args_count = 1;
clkspec.args[0] = CGC_BIT_GE0;
orion_clkdev_add(NULL, "mv643xx_eth_port.0",
of_clk_get_from_provider(&clkspec));
clkspec.args[0] = CGC_BIT_PEX0;
orion_clkdev_add("0", "pcie",
of_clk_get_from_provider(&clkspec));
@ -59,9 +55,24 @@ static void __init kirkwood_legacy_clk_init(void)
orion_clkdev_add("1", "pcie",
of_clk_get_from_provider(&clkspec));
clkspec.args[0] = CGC_BIT_GE1;
orion_clkdev_add(NULL, "mv643xx_eth_port.1",
clkspec.args[0] = CGC_BIT_SDIO;
orion_clkdev_add(NULL, "mvsdio",
of_clk_get_from_provider(&clkspec));
/*
* The ethernet interfaces forget the MAC address assigned by
* u-boot if the clocks are turned off. Until proper DT support
* is available we always enable them for now.
*/
clkspec.args[0] = CGC_BIT_GE0;
clk = of_clk_get_from_provider(&clkspec);
orion_clkdev_add(NULL, "mv643xx_eth_port.0", clk);
clk_prepare_enable(clk);
clkspec.args[0] = CGC_BIT_GE1;
clk = of_clk_get_from_provider(&clkspec);
orion_clkdev_add(NULL, "mv643xx_eth_port.1", clk);
clk_prepare_enable(clk);
}
static void __init kirkwood_of_clk_init(void)

2
arch/arm/mach-mxs/icoll.c
View File

@ -100,7 +100,7 @@ static struct irq_domain_ops icoll_irq_domain_ops = {
.xlate = irq_domain_xlate_onecell,
};
void __init icoll_of_init(struct device_node *np,
static void __init icoll_of_init(struct device_node *np,
struct device_node *interrupt_parent)
{
/*

10
arch/arm/mach-mxs/mach-mxs.c
View File

@ -402,17 +402,17 @@ static void __init cfa10049_init(void)
{
enable_clk_enet_out();
update_fec_mac_prop(OUI_CRYSTALFONTZ);
mxsfb_pdata.mode_list = cfa10049_video_modes;
mxsfb_pdata.mode_count = ARRAY_SIZE(cfa10049_video_modes);
mxsfb_pdata.default_bpp = 32;
mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT;
}
static void __init cfa10037_init(void)
{
enable_clk_enet_out();
update_fec_mac_prop(OUI_CRYSTALFONTZ);
mxsfb_pdata.mode_list = cfa10049_video_modes;
mxsfb_pdata.mode_count = ARRAY_SIZE(cfa10049_video_modes);
mxsfb_pdata.default_bpp = 32;
mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT;
}
static void __init apf28_init(void)

1
arch/arm/mach-mxs/mm.c
View File

@ -18,6 +18,7 @@
#include <mach/mx23.h>
#include <mach/mx28.h>
#include <mach/common.h>
/*
* Define the MX23 memory map.

1
arch/arm/mach-mxs/ocotp.c
View File

@ -19,6 +19,7 @@
#include <asm/processor.h> /* for cpu_relax() */
#include <mach/mxs.h>
#include <mach/common.h>
#define OCOTP_WORD_OFFSET 0x20
#define OCOTP_WORD_COUNT 0x20

2
arch/arm/mach-omap1/common.h
View File

@ -31,6 +31,8 @@
#include <plat/i2c.h>
#include <mach/irqs.h>
#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
void omap7xx_map_io(void);
#else

6
arch/arm/mach-omap2/Kconfig
View File

@ -311,9 +311,6 @@ config MACH_OMAP_ZOOM2
default y
select OMAP_PACKAGE_CBB
select REGULATOR_FIXED_VOLTAGE if REGULATOR
select SERIAL_8250
select SERIAL_8250_CONSOLE
select SERIAL_CORE_CONSOLE
config MACH_OMAP_ZOOM3
bool "OMAP3630 Zoom3 board"
@ -321,9 +318,6 @@ config MACH_OMAP_ZOOM3
default y
select OMAP_PACKAGE_CBP
select REGULATOR_FIXED_VOLTAGE if REGULATOR
select SERIAL_8250
select SERIAL_8250_CONSOLE
select SERIAL_CORE_CONSOLE
config MACH_CM_T35
bool "CompuLab CM-T35/CM-T3730 modules"

2
arch/arm/mach-omap2/board-generic.c
View File

@ -102,6 +102,7 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)")
.init_irq = omap_intc_of_init,
.handle_irq = omap3_intc_handle_irq,
.init_machine = omap_generic_init,
.init_late = omap3_init_late,
.init_time = omap3_sync32k_timer_init,
.dt_compat = omap3_boards_compat,
.restart = omap3xxx_restart,
@ -119,6 +120,7 @@ DT_MACHINE_START(OMAP3_GP_DT, "Generic OMAP3-GP (Flattened Device Tree)")
.init_irq = omap_intc_of_init,
.handle_irq = omap3_intc_handle_irq,
.init_machine = omap_generic_init,
.init_late = omap3_init_late,
.init_time = omap3_secure_sync32k_timer_init,
.dt_compat = omap3_gp_boards_compat,
.restart = omap3xxx_restart,

2
arch/arm/mach-omap2/board-rx51.c
View File

@ -17,6 +17,7 @@
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/leds.h>
#include <linux/usb/phy.h>
#include <linux/usb/musb.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
@ -98,6 +99,7 @@ static void __init rx51_init(void)
sdrc_params = nokia_get_sdram_timings();
omap_sdrc_init(sdrc_params, sdrc_params);
usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
usb_musb_init(&musb_board_data);
rx51_peripherals_init();

1
arch/arm/mach-omap2/common.h
View File

@ -108,7 +108,6 @@ void omap35xx_init_late(void);
void omap3630_init_late(void);
void am35xx_init_late(void);
void ti81xx_init_late(void);
void omap4430_init_late(void);
int omap2_common_pm_late_init(void);
#if defined(CONFIG_SOC_OMAP2420) || defined(CONFIG_SOC_OMAP2430)

6
arch/arm/mach-omap2/gpmc.c
View File

@ -1122,9 +1122,6 @@ int gpmc_calc_timings(struct gpmc_timings *gpmc_t,
/* TODO: remove, see function definition */
gpmc_convert_ps_to_ns(gpmc_t);
/* Now the GPMC is initialised, unreserve the chip-selects */
gpmc_cs_map = 0;
return 0;
}
@ -1383,6 +1380,9 @@ static int gpmc_probe(struct platform_device *pdev)
if (IS_ERR_VALUE(gpmc_setup_irq()))
dev_warn(gpmc_dev, "gpmc_setup_irq failed\n");
/* Now the GPMC is initialised, unreserve the chip-selects */
gpmc_cs_map = 0;
rc = gpmc_probe_dt(pdev);
if (rc < 0) {
clk_disable_unprepare(gpmc_l3_clk);

9
arch/arm/mach-omap2/mux.c
View File

@ -211,8 +211,6 @@ static int __init _omap_mux_get_by_name(struct omap_mux_partition *partition,
return -EINVAL;
}
pr_err("%s: Could not find signal %s\n", __func__, muxname);
return -ENODEV;
}
@ -234,6 +232,8 @@ int __init omap_mux_get_by_name(const char *muxname,
return mux_mode;
}
pr_err("%s: Could not find signal %s\n", __func__, muxname);
return -ENODEV;
}
@ -739,8 +739,9 @@ static void __init omap_mux_dbg_create_entry(
list_for_each_entry(e, &partition->muxmodes, node) {
struct omap_mux *m = &e->mux;
(void)debugfs_create_file(m->muxnames[0], S_IWUSR, mux_dbg_dir,
m, &omap_mux_dbg_signal_fops);
(void)debugfs_create_file(m->muxnames[0], S_IWUSR | S_IRUGO,
mux_dbg_dir, m,
&omap_mux_dbg_signal_fops);
}
}

1
arch/arm/mach-pxa/raumfeld.c
View File

@ -505,6 +505,7 @@ static struct w1_gpio_platform_data w1_gpio_platform_data = {
.pin = GPIO_ONE_WIRE,
.is_open_drain = 0,
.enable_external_pullup = w1_enable_external_pullup,
.ext_pullup_enable_pin = -EINVAL,
};
struct platform_device raumfeld_w1_gpio_device = {

2
arch/arm/mach-spear3xx/spear3xx.c
View File

@ -14,7 +14,7 @@
#define pr_fmt(fmt) "SPEAr3xx: " fmt
#include <linux/amba/pl022.h>
#include <linux/amba/pl08x.h>
#include <linux/amba/pl080.h>
#include <linux/io.h>
#include <plat/pl080.h>
#include <mach/generic.h>

5
arch/arm/mm/dma-mapping.c
View File

@ -342,6 +342,7 @@ static int __init atomic_pool_init(void)
{
struct dma_pool *pool = &atomic_pool;
pgprot_t prot = pgprot_dmacoherent(pgprot_kernel);
gfp_t gfp = GFP_KERNEL | GFP_DMA;
unsigned long nr_pages = pool->size >> PAGE_SHIFT;
unsigned long *bitmap;
struct page *page;
@ -361,8 +362,8 @@ static int __init atomic_pool_init(void)
ptr = __alloc_from_contiguous(NULL, pool->size, prot, &page,
atomic_pool_init);
else
ptr = __alloc_remap_buffer(NULL, pool->size, GFP_KERNEL, prot,
&page, atomic_pool_init);
ptr = __alloc_remap_buffer(NULL, pool->size, gfp, prot, &page,
atomic_pool_init);
if (ptr) {
int i;

7
arch/arm/plat-orion/addr-map.c
View File

@ -157,9 +157,12 @@ void __init orion_setup_cpu_mbus_target(const struct orion_addr_map_cfg *cfg,
u32 size = readl(ddr_window_cpu_base + DDR_SIZE_CS_OFF(i));
/*
* Chip select enabled?
* We only take care of entries for which the chip
* select is enabled, and that don't have high base
* address bits set (devices can only access the first
* 32 bits of the memory).
*/
if (size & 1) {
if ((size & 1) && !(base & 0xF)) {
struct mbus_dram_window *w;
w = &orion_mbus_dram_info.cs[cs++];

2
arch/arm/plat-spear/Kconfig
View File

@ -10,7 +10,7 @@ choice
config ARCH_SPEAR13XX
bool "ST SPEAr13xx with Device Tree"
select ARCH_HAVE_CPUFREQ
select ARCH_HAS_CPUFREQ
select ARM_GIC
select CPU_V7
select GPIO_SPEAR_SPICS

2
arch/avr32/Kconfig
View File

@ -7,7 +7,7 @@ config AVR32
select HAVE_OPROFILE
select HAVE_KPROBES
select HAVE_GENERIC_HARDIRQS
select HAVE_VIRT_TO_BUS
select VIRT_TO_BUS
select GENERIC_IRQ_PROBE
select GENERIC_ATOMIC64
select HARDIRQS_SW_RESEND

2
arch/blackfin/Kconfig
View File

@ -33,7 +33,7 @@ config BLACKFIN
select ARCH_HAVE_CUSTOM_GPIO_H
select ARCH_WANT_OPTIONAL_GPIOLIB
select HAVE_UID16
select HAVE_VIRT_TO_BUS
select VIRT_TO_BUS
select ARCH_WANT_IPC_PARSE_VERSION
select HAVE_GENERIC_HARDIRQS
select GENERIC_ATOMIC64

2
arch/cris/Kconfig
View File

@ -43,7 +43,7 @@ config CRIS
select GENERIC_ATOMIC64
select HAVE_GENERIC_HARDIRQS
select HAVE_UID16
select HAVE_VIRT_TO_BUS
select VIRT_TO_BUS
select ARCH_WANT_IPC_PARSE_VERSION
select GENERIC_IRQ_SHOW
select GENERIC_IOMAP

2
arch/frv/Kconfig
View File

@ -6,7 +6,7 @@ config FRV
select HAVE_PERF_EVENTS
select HAVE_UID16
select HAVE_GENERIC_HARDIRQS
select HAVE_VIRT_TO_BUS
select VIRT_TO_BUS
select GENERIC_IRQ_SHOW
select HAVE_DEBUG_BUGVERBOSE
select ARCH_HAVE_NMI_SAFE_CMPXCHG

2
arch/h8300/Kconfig
View File

@ -5,7 +5,7 @@ config H8300
select HAVE_GENERIC_HARDIRQS
select GENERIC_ATOMIC64
select HAVE_UID16
select HAVE_VIRT_TO_BUS
select VIRT_TO_BUS
select ARCH_WANT_IPC_PARSE_VERSION
select GENERIC_IRQ_SHOW
select GENERIC_CPU_DEVICES

2
arch/ia64/Kconfig
View File

@ -26,7 +26,7 @@ config IA64
select HAVE_MEMBLOCK
select HAVE_MEMBLOCK_NODE_MAP
select HAVE_VIRT_CPU_ACCOUNTING
select HAVE_VIRT_TO_BUS
select VIRT_TO_BUS
select ARCH_DISCARD_MEMBLOCK
select GENERIC_IRQ_PROBE
select GENERIC_PENDING_IRQ if SMP

2
arch/m32r/Kconfig
View File

@ -10,7 +10,7 @@ config M32R
select ARCH_WANT_IPC_PARSE_VERSION
select HAVE_DEBUG_BUGVERBOSE
select HAVE_GENERIC_HARDIRQS
select HAVE_VIRT_TO_BUS
select VIRT_TO_BUS
select GENERIC_IRQ_PROBE
select GENERIC_IRQ_SHOW
select GENERIC_ATOMIC64

4
arch/m32r/include/uapi/asm/stat.h
View File

@ -63,10 +63,10 @@ struct stat64 {
long long st_size;
unsigned long st_blksize;
#if defined(__BIG_ENDIAN)
#if defined(__BYTE_ORDER) ? __BYTE_ORDER == __BIG_ENDIAN : defined(__BIG_ENDIAN)
unsigned long __pad4; /* future possible st_blocks high bits */
unsigned long st_blocks; /* Number 512-byte blocks allocated. */
#elif defined(__LITTLE_ENDIAN)
#elif defined(__BYTE_ORDER) ? __BYTE_ORDER == __LITTLE_ENDIAN : defined(__LITTLE_ENDIAN)
unsigned long st_blocks; /* Number 512-byte blocks allocated. */
unsigned long __pad4; /* future possible st_blocks high bits */
#else

2
arch/m68k/Kconfig
View File

@ -8,7 +8,7 @@ config M68K
select GENERIC_IRQ_SHOW
select GENERIC_ATOMIC64
select HAVE_UID16
select HAVE_VIRT_TO_BUS
select VIRT_TO_BUS
select ARCH_HAVE_NMI_SAFE_CMPXCHG if RMW_INSNS
select GENERIC_CPU_DEVICES
select GENERIC_STRNCPY_FROM_USER if MMU

1
arch/m68k/Kconfig.machine
View File

@ -310,7 +310,6 @@ config COBRA5282
config SOM5282EM
bool "EMAC.Inc SOM5282EM board support"
depends on M528x
select EMAC_INC
help
Support for the EMAC.Inc SOM5282EM module.

10
arch/m68k/include/asm/MC68328.h
View File

@ -293,7 +293,7 @@
/*
* Here go the bitmasks themselves
*/
#define IMR_MSPIM (1 << SPIM _IRQ_NUM) /* Mask SPI Master interrupt */
#define IMR_MSPIM (1 << SPIM_IRQ_NUM) /* Mask SPI Master interrupt */
#define IMR_MTMR2 (1 << TMR2_IRQ_NUM) /* Mask Timer 2 interrupt */
#define IMR_MUART (1 << UART_IRQ_NUM) /* Mask UART interrupt */
#define IMR_MWDT (1 << WDT_IRQ_NUM) /* Mask Watchdog Timer interrupt */
@ -327,7 +327,7 @@
#define IWR_ADDR 0xfffff308
#define IWR LONG_REF(IWR_ADDR)
#define IWR_SPIM (1 << SPIM _IRQ_NUM) /* SPI Master interrupt */
#define IWR_SPIM (1 << SPIM_IRQ_NUM) /* SPI Master interrupt */
#define IWR_TMR2 (1 << TMR2_IRQ_NUM) /* Timer 2 interrupt */
#define IWR_UART (1 << UART_IRQ_NUM) /* UART interrupt */
#define IWR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */
@ -357,7 +357,7 @@
#define ISR_ADDR 0xfffff30c
#define ISR LONG_REF(ISR_ADDR)
#define ISR_SPIM (1 << SPIM _IRQ_NUM) /* SPI Master interrupt */
#define ISR_SPIM (1 << SPIM_IRQ_NUM) /* SPI Master interrupt */
#define ISR_TMR2 (1 << TMR2_IRQ_NUM) /* Timer 2 interrupt */
#define ISR_UART (1 << UART_IRQ_NUM) /* UART interrupt */
#define ISR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */
@ -391,7 +391,7 @@
#define IPR_ADDR 0xfffff310
#define IPR LONG_REF(IPR_ADDR)
#define IPR_SPIM (1 << SPIM _IRQ_NUM) /* SPI Master interrupt */
#define IPR_SPIM (1 << SPIM_IRQ_NUM) /* SPI Master interrupt */
#define IPR_TMR2 (1 << TMR2_IRQ_NUM) /* Timer 2 interrupt */
#define IPR_UART (1 << UART_IRQ_NUM) /* UART interrupt */
#define IPR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */
@ -757,7 +757,7 @@
/* 'EZ328-compatible definitions */
#define TCN_ADDR TCN1_ADDR
#define TCN TCN
#define TCN TCN1
/*
* Timer Unit 1 and 2 Status Registers

3
arch/m68k/kernel/setup_no.c
View File

@ -57,6 +57,9 @@ void (*mach_reset)(void);
void (*mach_halt)(void);
void (*mach_power_off)(void);
#ifdef CONFIG_M68000
#define CPU_NAME "MC68000"
#endif
#ifdef CONFIG_M68328
#define CPU_NAME "MC68328"
#endif

2
arch/m68k/mm/init.c
View File

@ -188,7 +188,7 @@ void __init mem_init(void)
}
}
#if !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE)
#if defined(CONFIG_MMU) && !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE)
/* insert pointer tables allocated so far into the tablelist */
init_pointer_table((unsigned long)kernel_pg_dir);
for (i = 0; i < PTRS_PER_PGD; i++) {

2
arch/m68k/platform/coldfire/m528x.c
View File

@ -69,7 +69,7 @@ static void __init m528x_uarts_init(void)
u8 port;
/* make sure PUAPAR is set for UART0 and UART1 */
port = readb(MCF5282_GPIO_PUAPAR);
port = readb(MCFGPIO_PUAPAR);
port |= 0x03 | (0x03 << 2);
writeb(port, MCFGPIO_PUAPAR);
}

2
arch/microblaze/Kconfig
View File

@ -19,7 +19,7 @@ config MICROBLAZE
select HAVE_DEBUG_KMEMLEAK
select IRQ_DOMAIN
select HAVE_GENERIC_HARDIRQS
select HAVE_VIRT_TO_BUS
select VIRT_TO_BUS
select GENERIC_IRQ_PROBE
select GENERIC_IRQ_SHOW
select GENERIC_PCI_IOMAP

2
arch/mips/Kconfig
View File

@ -38,7 +38,7 @@ config MIPS
select GENERIC_CLOCKEVENTS
select GENERIC_CMOS_UPDATE
select HAVE_MOD_ARCH_SPECIFIC
select HAVE_VIRT_TO_BUS
select VIRT_TO_BUS
select MODULES_USE_ELF_REL if MODULES
select MODULES_USE_ELF_RELA if MODULES && 64BIT
select CLONE_BACKWARDS

2
arch/mn10300/Kconfig
View File

@ -8,7 +8,7 @@ config MN10300
select HAVE_ARCH_KGDB
select GENERIC_ATOMIC64
select HAVE_NMI_WATCHDOG if MN10300_WD_TIMER
select HAVE_VIRT_TO_BUS
select VIRT_TO_BUS
select GENERIC_CLOCKEVENTS
select MODULES_USE_ELF_RELA
select OLD_SIGSUSPEND3

3
arch/openrisc/Kconfig
View File

@ -9,10 +9,9 @@ config OPENRISC
select OF_EARLY_FLATTREE
select IRQ_DOMAIN
select HAVE_MEMBLOCK
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARCH_REQUIRE_GPIOLIB
select HAVE_ARCH_TRACEHOOK
select HAVE_GENERIC_HARDIRQS
select HAVE_VIRT_TO_BUS
select GENERIC_IRQ_CHIP
select GENERIC_IRQ_PROBE
select GENERIC_IRQ_SHOW

2
arch/parisc/Kconfig
View File

@ -21,7 +21,7 @@ config PARISC
select GENERIC_STRNCPY_FROM_USER
select SYSCTL_ARCH_UNALIGN_ALLOW
select HAVE_MOD_ARCH_SPECIFIC
select HAVE_VIRT_TO_BUS
select VIRT_TO_BUS
select MODULES_USE_ELF_RELA
select CLONE_BACKWARDS
select TTY # Needed for pdc_cons.c

2
arch/powerpc/Kconfig
View File

@ -98,7 +98,7 @@ config PPC
select HAVE_FUNCTION_GRAPH_TRACER
select SYSCTL_EXCEPTION_TRACE
select ARCH_WANT_OPTIONAL_GPIOLIB
select HAVE_VIRT_TO_BUS if !PPC64
select VIRT_TO_BUS if !PPC64
select HAVE_IDE
select HAVE_IOREMAP_PROT
select HAVE_EFFICIENT_UNALIGNED_ACCESS

2
arch/s390/Kconfig
View File

@ -134,7 +134,7 @@ config S390
select HAVE_SYSCALL_WRAPPERS
select HAVE_UID16 if 32BIT
select HAVE_VIRT_CPU_ACCOUNTING
select HAVE_VIRT_TO_BUS
select VIRT_TO_BUS
select INIT_ALL_POSSIBLE
select KTIME_SCALAR if 32BIT
select MODULES_USE_ELF_RELA

1
arch/s390/include/asm/cpu_mf.h
View File

@ -12,6 +12,7 @@
#ifndef _ASM_S390_CPU_MF_H
#define _ASM_S390_CPU_MF_H
#include <linux/errno.h>
#include <asm/facility.h>
#define CPU_MF_INT_SF_IAE (1 << 31) /* invalid entry address */

2
arch/score/Kconfig
View File

@ -12,7 +12,7 @@ config SCORE
select GENERIC_CPU_DEVICES
select GENERIC_CLOCKEVENTS
select HAVE_MOD_ARCH_SPECIFIC
select HAVE_VIRT_TO_BUS
select VIRT_TO_BUS
select MODULES_USE_ELF_REL
select CLONE_BACKWARDS

2
arch/tile/Kconfig
View File

@ -17,7 +17,7 @@ config TILE
select GENERIC_IRQ_SHOW
select HAVE_DEBUG_BUGVERBOSE
select HAVE_SYSCALL_WRAPPERS if TILEGX
select HAVE_VIRT_TO_BUS
select VIRT_TO_BUS
select SYS_HYPERVISOR
select ARCH_HAVE_NMI_SAFE_CMPXCHG
select GENERIC_CLOCKEVENTS

2
arch/um/drivers/chan.h
View File

@ -37,7 +37,7 @@ extern int console_write_chan(struct chan *chan, const char *buf,
extern int console_open_chan(struct line *line, struct console *co);
extern void deactivate_chan(struct chan *chan, int irq);
extern void reactivate_chan(struct chan *chan, int irq);
extern void chan_enable_winch(struct chan *chan, struct tty_struct *tty);
extern void chan_enable_winch(struct chan *chan, struct tty_port *port);
extern int enable_chan(struct line *line);
extern void close_chan(struct line *line);
extern int chan_window_size(struct line *line,

4
arch/um/drivers/chan_kern.c
View File

@ -122,10 +122,10 @@ static int open_chan(struct list_head *chans)
return err;
}
void chan_enable_winch(struct chan *chan, struct tty_struct *tty)
void chan_enable_winch(struct chan *chan, struct tty_port *port)
{
if (chan && chan->primary && chan->ops->winch)
register_winch(chan->fd, tty);
register_winch(chan->fd, port);
}
static void line_timer_cb(struct work_struct *work)

Some files were not shown because too many files have changed in this diff Show More