leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity

amd-xgbe: Move the PHY support into amd-xgbe

Browse Source 
The AMD XGBE device is intended to work with a specific integrated PHY
and that PHY is not meant to be a standalone PHY for use by other
devices. As such this patch removes the phylib driver and implements
the PHY support in the amd-xgbe driver (the majority of the logic from
the phylib driver is moved into the amd-xgbe driver).

Update the driver version to 1.0.1.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Lendacky, Thomas 2015-05-14 11:44:15 -05:00 committed by David S. Miller
parent 7d9ca345b5
commit 7c12aa0877
14 changed files with 1835 additions and 2281 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

48
Documentation/devicetree/bindings/net/amd-xgbe-phy.txt
View File

@ -1,48 +0,0 @@
* AMD 10GbE PHY driver (amd-xgbe-phy)
Required properties:
- compatible: Should be "amd,xgbe-phy-seattle-v1a" and
"ethernet-phy-ieee802.3-c45"
- reg: Address and length of the register sets for the device
- SerDes Rx/Tx registers
- SerDes integration registers (1/2)
- SerDes integration registers (2/2)
- interrupt-parent: Should be the phandle for the interrupt controller
that services interrupts for this device
- interrupts: Should contain the amd-xgbe-phy interrupt.
Optional properties:
- amd,speed-set: Speed capabilities of the device
0 - 1GbE and 10GbE (default)
1 - 2.5GbE and 10GbE
The following optional properties are represented by an array with each
value corresponding to a particular speed. The first array value represents
the setting for the 1GbE speed, the second value for the 2.5GbE speed and
the third value for the 10GbE speed. All three values are required if the
property is used.
- amd,serdes-blwc: Baseline wandering correction enablement
0 - Off
1 - On
- amd,serdes-cdr-rate: CDR rate speed selection
- amd,serdes-pq-skew: PQ (data sampling) skew
- amd,serdes-tx-amp: TX amplitude boost
- amd,serdes-dfe-tap-config: DFE taps available to run
- amd,serdes-dfe-tap-enable: DFE taps to enable
Example:
xgbe_phy@e1240800 {
compatible = "amd,xgbe-phy-seattle-v1a", "ethernet-phy-ieee802.3-c45";
reg = <0 0xe1240800 0 0x00400>,
<0 0xe1250000 0 0x00060>,
<0 0xe1250080 0 0x00004>;
interrupt-parent = <&gic>;
interrupts = <0 323 4>;
amd,speed-set = <0>;
amd,serdes-blwc = <1>, <1>, <0>;
amd,serdes-cdr-rate = <2>, <2>, <7>;
amd,serdes-pq-skew = <10>, <10>, <30>;
amd,serdes-tx-amp = <15>, <15>, <10>;
amd,serdes-dfe-tap-config = <3>, <3>, <1>;
amd,serdes-dfe-tap-enable = <0>, <0>, <127>;
};

51
Documentation/devicetree/bindings/net/amd-xgbe.txt
View File

@ -1,6 +1,6 @@
* AMD 10GbE driver (amd-xgbe)
Required properties:
Required properties (ethernet device):
- compatible: Should be "amd,xgbe-seattle-v1a"
- reg: Address and length of the register sets for the device
- MAC registers
@ -22,7 +22,7 @@ Required properties:
- phy-handle: See ethernet.txt file in the same directory
- phy-mode: See ethernet.txt file in the same directory
Optional properties:
Optional properties (ethernet device):
- mac-address: mac address to be assigned to the device. Can be overridden
by UEFI.
- dma-coherent: Present if dma operations are coherent
@ -30,6 +30,35 @@ Optional properties:
a unique interrupt for each DMA channel - this requires an additional
interrupt be configured for each DMA channel
Required properties (phy device):
- compatible: Should be "amd,xgbe-phy-seattle-v1a"
- reg: Address and length of the register sets for the device
- SerDes Rx/Tx registers
- SerDes integration registers (1/2)
- SerDes integration registers (2/2)
- interrupt-parent: Should be the phandle for the interrupt controller
that services interrupts for this device
- interrupts: Should contain the amd-xgbe-phy interrupt.
Optional properties (phy device):
- amd,speed-set: Speed capabilities of the device
0 - 1GbE and 10GbE (default)
1 - 2.5GbE and 10GbE
The following optional properties are represented by an array with each
value corresponding to a particular speed. The first array value represents
the setting for the 1GbE speed, the second value for the 2.5GbE speed and
the third value for the 10GbE speed. All three values are required if the
property is used.
- amd,serdes-blwc: Baseline wandering correction enablement
0 - Off
1 - On
- amd,serdes-cdr-rate: CDR rate speed selection
- amd,serdes-pq-skew: PQ (data sampling) skew
- amd,serdes-tx-amp: TX amplitude boost
- amd,serdes-dfe-tap-config: DFE taps available to run
- amd,serdes-dfe-tap-enable: DFE taps to enable
Example:
xgbe@e0700000 {
compatible = "amd,xgbe-seattle-v1a";
@ -41,7 +70,23 @@ Example:
amd,per-channel-interrupt;
clocks = <&xgbe_dma_clk>, <&xgbe_ptp_clk>;
clock-names = "dma_clk", "ptp_clk";
phy-handle = <&phy>;
phy-handle = <&xgbe_phy>;
phy-mode = "xgmii";
mac-address = [ 02 a1 a2 a3 a4 a5 ];
};
xgbe_phy@e1240800 {
compatible = "amd,xgbe-phy-seattle-v1a";
reg = <0 0xe1240800 0 0x00400>,
<0 0xe1250000 0 0x00060>,
<0 0xe1250080 0 0x00004>;
interrupt-parent = <&gic>;
interrupts = <0 323 4>;
amd,speed-set = <0>;
amd,serdes-blwc = <1>, <1>, <0>;
amd,serdes-cdr-rate = <2>, <2>, <7>;
amd,serdes-pq-skew = <10>, <10>, <30>;
amd,serdes-tx-amp = <15>, <15>, <10>;
amd,serdes-dfe-tap-config = <3>, <3>, <1>;
amd,serdes-dfe-tap-enable = <0>, <0>, <127>;
};

1
MAINTAINERS
View File

@ -652,7 +652,6 @@ M: Tom Lendacky <thomas.lendacky@amd.com>
L: netdev@vger.kernel.org
S: Supported
F: drivers/net/ethernet/amd/xgbe/
F: drivers/net/phy/amd-xgbe-phy.c
AMS (Apple Motion Sensor) DRIVER
M: Michael Hanselmann <linux-kernel@hansmi.ch>

4
drivers/net/ethernet/amd/Kconfig
View File

@ -179,10 +179,8 @@ config SUNLANCE
config AMD_XGBE
tristate "AMD 10GbE Ethernet driver"
depends on (OF_NET || ACPI) && HAS_IOMEM && HAS_DMA
depends on ((OF_NET && OF_ADDRESS) || ACPI) && HAS_IOMEM && HAS_DMA
depends on ARM64 || COMPILE_TEST
select PHYLIB
select AMD_XGBE_PHY
select BITREVERSE
select CRC32
select PTP_1588_CLOCK

155
drivers/net/ethernet/amd/xgbe/xgbe-common.h
View File

@ -857,6 +857,48 @@
*/
#define PCS_MMD_SELECT 0xff
/* SerDes integration register offsets */
#define SIR0_KR_RT_1 0x002c
#define SIR0_STATUS 0x0040
#define SIR1_SPEED 0x0000
/* SerDes integration register entry bit positions and sizes */
#define SIR0_KR_RT_1_RESET_INDEX 11
#define SIR0_KR_RT_1_RESET_WIDTH 1
#define SIR0_STATUS_RX_READY_INDEX 0
#define SIR0_STATUS_RX_READY_WIDTH 1
#define SIR0_STATUS_TX_READY_INDEX 8
#define SIR0_STATUS_TX_READY_WIDTH 1
#define SIR1_SPEED_CDR_RATE_INDEX 12
#define SIR1_SPEED_CDR_RATE_WIDTH 4
#define SIR1_SPEED_DATARATE_INDEX 4
#define SIR1_SPEED_DATARATE_WIDTH 2
#define SIR1_SPEED_PLLSEL_INDEX 3
#define SIR1_SPEED_PLLSEL_WIDTH 1
#define SIR1_SPEED_RATECHANGE_INDEX 6
#define SIR1_SPEED_RATECHANGE_WIDTH 1
#define SIR1_SPEED_TXAMP_INDEX 8
#define SIR1_SPEED_TXAMP_WIDTH 4
#define SIR1_SPEED_WORDMODE_INDEX 0
#define SIR1_SPEED_WORDMODE_WIDTH 3
/* SerDes RxTx register offsets */
#define RXTX_REG6 0x0018
#define RXTX_REG20 0x0050
#define RXTX_REG22 0x0058
#define RXTX_REG114 0x01c8
#define RXTX_REG129 0x0204
/* SerDes RxTx register entry bit positions and sizes */
#define RXTX_REG6_RESETB_RXD_INDEX 8
#define RXTX_REG6_RESETB_RXD_WIDTH 1
#define RXTX_REG20_BLWC_ENA_INDEX 2
#define RXTX_REG20_BLWC_ENA_WIDTH 1
#define RXTX_REG114_PQ_REG_INDEX 9
#define RXTX_REG114_PQ_REG_WIDTH 7
#define RXTX_REG129_RXDFE_CONFIG_INDEX 14
#define RXTX_REG129_RXDFE_CONFIG_WIDTH 2
/* Descriptor/Packet entry bit positions and sizes */
#define RX_PACKET_ERRORS_CRC_INDEX 2
#define RX_PACKET_ERRORS_CRC_WIDTH 1
@ -973,10 +1015,47 @@
#define TX_NORMAL_DESC2_VLAN_INSERT 0x2
/* MDIO undefined or vendor specific registers */
#ifndef MDIO_PMA_10GBR_PMD_CTRL
#define MDIO_PMA_10GBR_PMD_CTRL 0x0096
#endif
#ifndef MDIO_PMA_10GBR_FECCTRL
#define MDIO_PMA_10GBR_FECCTRL 0x00ab
#endif
#ifndef MDIO_AN_XNP
#define MDIO_AN_XNP 0x0016
#endif
#ifndef MDIO_AN_LPX
#define MDIO_AN_LPX 0x0019
#endif
#ifndef MDIO_AN_COMP_STAT
#define MDIO_AN_COMP_STAT 0x0030
#endif
#ifndef MDIO_AN_INTMASK
#define MDIO_AN_INTMASK 0x8001
#endif
#ifndef MDIO_AN_INT
#define MDIO_AN_INT 0x8002
#endif
#ifndef MDIO_CTRL1_SPEED1G
#define MDIO_CTRL1_SPEED1G (MDIO_CTRL1_SPEED10G & ~BMCR_SPEED100)
#endif
/* MDIO mask values */
#define XGBE_XNP_MCF_NULL_MESSAGE 0x001
#define XGBE_XNP_ACK_PROCESSED BIT(12)
#define XGBE_XNP_MP_FORMATTED BIT(13)
#define XGBE_XNP_NP_EXCHANGE BIT(15)
#define XGBE_KR_TRAINING_START BIT(0)
#define XGBE_KR_TRAINING_ENABLE BIT(1)
/* Bit setting and getting macros
* The get macro will extract the current bit field value from within
* the variable
@ -1118,6 +1197,82 @@ do { \
#define XPCS_IOREAD(_pdata, _off) \
ioread32((_pdata)->xpcs_regs + (_off))
/* Macros for building, reading or writing register values or bits
* within the register values of SerDes integration registers.
*/
#define XSIR_GET_BITS(_var, _prefix, _field) \
GET_BITS((_var), \
_prefix##_##_field##_INDEX, \
_prefix##_##_field##_WIDTH)
#define XSIR_SET_BITS(_var, _prefix, _field, _val) \
SET_BITS((_var), \
_prefix##_##_field##_INDEX, \
_prefix##_##_field##_WIDTH, (_val))
#define XSIR0_IOREAD(_pdata, _reg) \
ioread16((_pdata)->sir0_regs + _reg)
#define XSIR0_IOREAD_BITS(_pdata, _reg, _field) \
GET_BITS(XSIR0_IOREAD((_pdata), _reg), \
_reg##_##_field##_INDEX, \
_reg##_##_field##_WIDTH)
#define XSIR0_IOWRITE(_pdata, _reg, _val) \
iowrite16((_val), (_pdata)->sir0_regs + _reg)
#define XSIR0_IOWRITE_BITS(_pdata, _reg, _field, _val) \
do { \
u16 reg_val = XSIR0_IOREAD((_pdata), _reg); \
SET_BITS(reg_val, \
_reg##_##_field##_INDEX, \
_reg##_##_field##_WIDTH, (_val)); \
XSIR0_IOWRITE((_pdata), _reg, reg_val); \
} while (0)
#define XSIR1_IOREAD(_pdata, _reg) \
ioread16((_pdata)->sir1_regs + _reg)
#define XSIR1_IOREAD_BITS(_pdata, _reg, _field) \
GET_BITS(XSIR1_IOREAD((_pdata), _reg), \
_reg##_##_field##_INDEX, \
_reg##_##_field##_WIDTH)
#define XSIR1_IOWRITE(_pdata, _reg, _val) \
iowrite16((_val), (_pdata)->sir1_regs + _reg)
#define XSIR1_IOWRITE_BITS(_pdata, _reg, _field, _val) \
do { \
u16 reg_val = XSIR1_IOREAD((_pdata), _reg); \
SET_BITS(reg_val, \
_reg##_##_field##_INDEX, \
_reg##_##_field##_WIDTH, (_val)); \
XSIR1_IOWRITE((_pdata), _reg, reg_val); \
} while (0)
/* Macros for building, reading or writing register values or bits
* within the register values of SerDes RxTx registers.
*/
#define XRXTX_IOREAD(_pdata, _reg) \
ioread16((_pdata)->rxtx_regs + _reg)
#define XRXTX_IOREAD_BITS(_pdata, _reg, _field) \
GET_BITS(XRXTX_IOREAD((_pdata), _reg), \
_reg##_##_field##_INDEX, \
_reg##_##_field##_WIDTH)
#define XRXTX_IOWRITE(_pdata, _reg, _val) \
iowrite16((_val), (_pdata)->rxtx_regs + _reg)
#define XRXTX_IOWRITE_BITS(_pdata, _reg, _field, _val) \
do { \
u16 reg_val = XRXTX_IOREAD((_pdata), _reg); \
SET_BITS(reg_val, \
_reg##_##_field##_INDEX, \
_reg##_##_field##_WIDTH, (_val)); \
XRXTX_IOWRITE((_pdata), _reg, reg_val); \
} while (0)
/* Macros for building, reading or writing register values or bits
* using MDIO. Different from above because of the use of standardized
* Linux include values. No shifting is performed with the bit

17
drivers/net/ethernet/amd/xgbe/xgbe-dev.c
View File

@ -910,23 +910,6 @@ static void xgbe_write_mmd_regs(struct xgbe_prv_data *pdata, int prtad,
else
mmd_address = (pdata->mdio_mmd << 16) | (mmd_reg & 0xffff);
/* If the PCS is changing modes, match the MAC speed to it */
if (((mmd_address >> 16) == MDIO_MMD_PCS) &&
((mmd_address & 0xffff) == MDIO_CTRL2)) {
struct phy_device *phydev = pdata->phydev;
if (mmd_data & MDIO_PCS_CTRL2_TYPE) {
/* KX mode */
if (phydev->supported & SUPPORTED_1000baseKX_Full)
xgbe_set_gmii_speed(pdata);
else
xgbe_set_gmii_2500_speed(pdata);
} else {
/* KR mode */
xgbe_set_xgmii_speed(pdata);
}
}
/* The PCS registers are accessed using mmio. The underlying APB3
* management interface uses indirect addressing to access the MMD
* register sets. This requires accessing of the PCS register in two

178
drivers/net/ethernet/amd/xgbe/xgbe-drv.c
View File

@ -437,12 +437,31 @@ static void xgbe_tx_timer(unsigned long data)
DBGPR("<--xgbe_tx_timer\n");
}
static void xgbe_init_tx_timers(struct xgbe_prv_data *pdata)
static void xgbe_service(struct work_struct *work)
{
struct xgbe_prv_data *pdata = container_of(work,
struct xgbe_prv_data,
service_work);
pdata->phy_if.phy_status(pdata);
}
static void xgbe_service_timer(unsigned long data)
{
struct xgbe_prv_data *pdata = (struct xgbe_prv_data *)data;
schedule_work(&pdata->service_work);
mod_timer(&pdata->service_timer, jiffies + HZ);
}
static void xgbe_init_timers(struct xgbe_prv_data *pdata)
{
struct xgbe_channel *channel;
unsigned int i;
DBGPR("-->xgbe_init_tx_timers\n");
setup_timer(&pdata->service_timer, xgbe_service_timer,
(unsigned long)pdata);
channel = pdata->channel;
for (i = 0; i < pdata->channel_count; i++, channel++) {
@ -452,16 +471,19 @@ static void xgbe_init_tx_timers(struct xgbe_prv_data *pdata)
setup_timer(&channel->tx_timer, xgbe_tx_timer,
(unsigned long)channel);
}
DBGPR("<--xgbe_init_tx_timers\n");
}
static void xgbe_stop_tx_timers(struct xgbe_prv_data *pdata)
static void xgbe_start_timers(struct xgbe_prv_data *pdata)
{
mod_timer(&pdata->service_timer, jiffies + HZ);
}
static void xgbe_stop_timers(struct xgbe_prv_data *pdata)
{
struct xgbe_channel *channel;
unsigned int i;
DBGPR("-->xgbe_stop_tx_timers\n");
del_timer_sync(&pdata->service_timer);
channel = pdata->channel;
for (i = 0; i < pdata->channel_count; i++, channel++) {
@ -470,8 +492,6 @@ static void xgbe_stop_tx_timers(struct xgbe_prv_data *pdata)
del_timer_sync(&channel->tx_timer);
}
DBGPR("<--xgbe_stop_tx_timers\n");
}
void xgbe_get_all_hw_features(struct xgbe_prv_data *pdata)
@ -758,113 +778,14 @@ static void xgbe_free_rx_data(struct xgbe_prv_data *pdata)
DBGPR("<--xgbe_free_rx_data\n");
}
static void xgbe_adjust_link(struct net_device *netdev)
{
struct xgbe_prv_data *pdata = netdev_priv(netdev);
struct xgbe_hw_if *hw_if = &pdata->hw_if;
struct phy_device *phydev = pdata->phydev;
int new_state = 0;
if (!phydev)
return;
if (phydev->link) {
/* Flow control support */
if (pdata->pause_autoneg) {
if (phydev->pause || phydev->asym_pause) {
pdata->tx_pause = 1;
pdata->rx_pause = 1;
} else {
pdata->tx_pause = 0;
pdata->rx_pause = 0;
}
}
if (pdata->tx_pause != pdata->phy_tx_pause) {
hw_if->config_tx_flow_control(pdata);
pdata->phy_tx_pause = pdata->tx_pause;
}
if (pdata->rx_pause != pdata->phy_rx_pause) {
hw_if->config_rx_flow_control(pdata);
pdata->phy_rx_pause = pdata->rx_pause;
}
/* Speed support */
if (phydev->speed != pdata->phy_speed) {
new_state = 1;
switch (phydev->speed) {
case SPEED_10000:
hw_if->set_xgmii_speed(pdata);
break;
case SPEED_2500:
hw_if->set_gmii_2500_speed(pdata);
break;
case SPEED_1000:
hw_if->set_gmii_speed(pdata);
break;
}
pdata->phy_speed = phydev->speed;
}
if (phydev->link != pdata->phy_link) {
new_state = 1;
pdata->phy_link = 1;
}
} else if (pdata->phy_link) {
new_state = 1;
pdata->phy_link = 0;
pdata->phy_speed = SPEED_UNKNOWN;
}
if (new_state)
phy_print_status(phydev);
}
static int xgbe_phy_init(struct xgbe_prv_data *pdata)
{
struct net_device *netdev = pdata->netdev;
struct phy_device *phydev = pdata->phydev;
int ret;
pdata->phy_link = -1;
pdata->phy_speed = SPEED_UNKNOWN;
pdata->phy_tx_pause = pdata->tx_pause;
pdata->phy_rx_pause = pdata->rx_pause;
ret = phy_connect_direct(netdev, phydev, &xgbe_adjust_link,
pdata->phy_mode);
if (ret) {
netdev_err(netdev, "phy_connect_direct failed\n");
return ret;
}
if (!phydev->drv || (phydev->drv->phy_id == 0)) {
netdev_err(netdev, "phy_id not valid\n");
ret = -ENODEV;
goto err_phy_connect;
}
netif_dbg(pdata, ifup, pdata->netdev,
"phy_connect_direct succeeded for PHY %s\n",
dev_name(&phydev->dev));
return 0;
err_phy_connect:
phy_disconnect(phydev);
return ret;
}
static void xgbe_phy_exit(struct xgbe_prv_data *pdata)
{
if (!pdata->phydev)
return;
phy_disconnect(pdata->phydev);
return pdata->phy_if.phy_reset(pdata);
}
int xgbe_powerdown(struct net_device *netdev, unsigned int caller)
@ -889,13 +810,14 @@ int xgbe_powerdown(struct net_device *netdev, unsigned int caller)
netif_tx_stop_all_queues(netdev);
xgbe_stop_timers(pdata);
flush_workqueue(pdata->dev_workqueue);
hw_if->powerdown_tx(pdata);
hw_if->powerdown_rx(pdata);
xgbe_napi_disable(pdata, 0);
phy_stop(pdata->phydev);
pdata->power_down = 1;
spin_unlock_irqrestore(&pdata->lock, flags);
@ -924,8 +846,6 @@ int xgbe_powerup(struct net_device *netdev, unsigned int caller)
pdata->power_down = 0;
phy_start(pdata->phydev);
xgbe_napi_enable(pdata, 0);
hw_if->powerup_tx(pdata);
@ -936,6 +856,8 @@ int xgbe_powerup(struct net_device *netdev, unsigned int caller)
netif_tx_start_all_queues(netdev);
xgbe_start_timers(pdata);
spin_unlock_irqrestore(&pdata->lock, flags);
DBGPR("<--xgbe_powerup\n");
@ -946,6 +868,7 @@ int xgbe_powerup(struct net_device *netdev, unsigned int caller)
static int xgbe_start(struct xgbe_prv_data *pdata)
{
struct xgbe_hw_if *hw_if = &pdata->hw_if;
struct xgbe_phy_if *phy_if = &pdata->phy_if;
struct net_device *netdev = pdata->netdev;
int ret;
@ -953,7 +876,9 @@ static int xgbe_start(struct xgbe_prv_data *pdata)
hw_if->init(pdata);
phy_start(pdata->phydev);
ret = phy_if->phy_start(pdata);
if (ret)
goto err_phy;
xgbe_napi_enable(pdata, 1);
@ -964,10 +889,11 @@ static int xgbe_start(struct xgbe_prv_data *pdata)
hw_if->enable_tx(pdata);
hw_if->enable_rx(pdata);
xgbe_init_tx_timers(pdata);
netif_tx_start_all_queues(netdev);
xgbe_start_timers(pdata);
schedule_work(&pdata->service_work);
DBGPR("<--xgbe_start\n");
return 0;
@ -975,8 +901,9 @@ static int xgbe_start(struct xgbe_prv_data *pdata)
err_napi:
xgbe_napi_disable(pdata, 1);
phy_stop(pdata->phydev);
phy_if->phy_stop(pdata);
err_phy:
hw_if->exit(pdata);
return ret;
@ -985,6 +912,7 @@ err_napi:
static void xgbe_stop(struct xgbe_prv_data *pdata)
{
struct xgbe_hw_if *hw_if = &pdata->hw_if;
struct xgbe_phy_if *phy_if = &pdata->phy_if;
struct xgbe_channel *channel;
struct net_device *netdev = pdata->netdev;
struct netdev_queue *txq;
@ -994,7 +922,8 @@ static void xgbe_stop(struct xgbe_prv_data *pdata)
netif_tx_stop_all_queues(netdev);
xgbe_stop_tx_timers(pdata);
xgbe_stop_timers(pdata);
flush_workqueue(pdata->dev_workqueue);
hw_if->disable_tx(pdata);
hw_if->disable_rx(pdata);
@ -1003,7 +932,7 @@ static void xgbe_stop(struct xgbe_prv_data *pdata)
xgbe_napi_disable(pdata, 1);
phy_stop(pdata->phydev);
phy_if->phy_stop(pdata);
hw_if->exit(pdata);
@ -1374,7 +1303,7 @@ static int xgbe_open(struct net_device *netdev)
ret = clk_prepare_enable(pdata->sysclk);
if (ret) {
netdev_alert(netdev, "dma clk_prepare_enable failed\n");
goto err_phy_init;
return ret;
}
ret = clk_prepare_enable(pdata->ptpclk);
@ -1399,14 +1328,17 @@ static int xgbe_open(struct net_device *netdev)
if (ret)
goto err_channels;
/* Initialize the device restart and Tx timestamp work struct */
INIT_WORK(&pdata->service_work, xgbe_service);
INIT_WORK(&pdata->restart_work, xgbe_restart);
INIT_WORK(&pdata->tx_tstamp_work, xgbe_tx_tstamp);
xgbe_init_timers(pdata);
ret = xgbe_start(pdata);
if (ret)
goto err_rings;
clear_bit(XGBE_DOWN, &pdata->dev_state);
DBGPR("<--xgbe_open\n");
return 0;
@ -1423,9 +1355,6 @@ err_ptpclk:
err_sysclk:
clk_disable_unprepare(pdata->sysclk);
err_phy_init:
xgbe_phy_exit(pdata);
return ret;
}
@ -1449,8 +1378,7 @@ static int xgbe_close(struct net_device *netdev)
clk_disable_unprepare(pdata->ptpclk);
clk_disable_unprepare(pdata->sysclk);
/* Release the phy */
xgbe_phy_exit(pdata);
set_bit(XGBE_DOWN, &pdata->dev_state);
DBGPR("<--xgbe_close\n");

50
drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c
View File

@ -258,7 +258,6 @@ static int xgbe_set_pauseparam(struct net_device *netdev,
struct ethtool_pauseparam *pause)
{
struct xgbe_prv_data *pdata = netdev_priv(netdev);
struct phy_device *phydev = pdata->phydev;
int ret = 0;
DBGPR("-->xgbe_set_pauseparam\n");
@ -268,19 +267,19 @@ static int xgbe_set_pauseparam(struct net_device *netdev,
pdata->pause_autoneg = pause->autoneg;
if (pause->autoneg) {
phydev->advertising |= ADVERTISED_Pause;
phydev->advertising |= ADVERTISED_Asym_Pause;
pdata->phy.advertising |= ADVERTISED_Pause;
pdata->phy.advertising |= ADVERTISED_Asym_Pause;
} else {
phydev->advertising &= ~ADVERTISED_Pause;
phydev->advertising &= ~ADVERTISED_Asym_Pause;
pdata->phy.advertising &= ~ADVERTISED_Pause;
pdata->phy.advertising &= ~ADVERTISED_Asym_Pause;
pdata->tx_pause = pause->tx_pause;
pdata->rx_pause = pause->rx_pause;
}
if (netif_running(netdev))
ret = phy_start_aneg(phydev);
ret = pdata->phy_if.phy_config_aneg(pdata);
DBGPR("<--xgbe_set_pauseparam\n");
@ -291,36 +290,39 @@ static int xgbe_get_settings(struct net_device *netdev,
struct ethtool_cmd *cmd)
{
struct xgbe_prv_data *pdata = netdev_priv(netdev);
int ret;
DBGPR("-->xgbe_get_settings\n");
if (!pdata->phydev)
return -ENODEV;
cmd->phy_address = pdata->phy.address;
ret = phy_ethtool_gset(pdata->phydev, cmd);
cmd->supported = pdata->phy.supported;
cmd->advertising = pdata->phy.advertising;
cmd->lp_advertising = pdata->phy.lp_advertising;
cmd->autoneg = pdata->phy.autoneg;
ethtool_cmd_speed_set(cmd, pdata->phy.speed);
cmd->duplex = pdata->phy.duplex;
cmd->port = PORT_NONE;
cmd->transceiver = XCVR_INTERNAL;
DBGPR("<--xgbe_get_settings\n");
return ret;
return 0;
}
static int xgbe_set_settings(struct net_device *netdev,
struct ethtool_cmd *cmd)
{
struct xgbe_prv_data *pdata = netdev_priv(netdev);
struct phy_device *phydev = pdata->phydev;
u32 speed;
int ret;
DBGPR("-->xgbe_set_settings\n");
if (!pdata->phydev)
return -ENODEV;
speed = ethtool_cmd_speed(cmd);
if (cmd->phy_address != phydev->addr)
if (cmd->phy_address != pdata->phy.address)
return -EINVAL;
if ((cmd->autoneg != AUTONEG_ENABLE) &&
@ -341,23 +343,23 @@ static int xgbe_set_settings(struct net_device *netdev,
return -EINVAL;
}
cmd->advertising &= phydev->supported;
cmd->advertising &= pdata->phy.supported;
if ((cmd->autoneg == AUTONEG_ENABLE) && !cmd->advertising)
return -EINVAL;
ret = 0;
phydev->autoneg = cmd->autoneg;
phydev->speed = speed;
phydev->duplex = cmd->duplex;
phydev->advertising = cmd->advertising;
pdata->phy.autoneg = cmd->autoneg;
pdata->phy.speed = speed;
pdata->phy.duplex = cmd->duplex;
pdata->phy.advertising = cmd->advertising;
if (cmd->autoneg == AUTONEG_ENABLE)
phydev->advertising |= ADVERTISED_Autoneg;
pdata->phy.advertising |= ADVERTISED_Autoneg;
else
phydev->advertising &= ~ADVERTISED_Autoneg;
pdata->phy.advertising &= ~ADVERTISED_Autoneg;
if (netif_running(netdev))
ret = phy_start_aneg(phydev);
ret = pdata->phy_if.phy_config_aneg(pdata);
DBGPR("<--xgbe_set_settings\n");

362
drivers/net/ethernet/amd/xgbe/xgbe-main.c
View File

@ -124,9 +124,11 @@
#include <linux/of.h>
#include <linux/of_net.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <linux/clk.h>
#include <linux/property.h>
#include <linux/acpi.h>
#include <linux/mdio.h>
#include "xgbe.h"
#include "xgbe-common.h"
@ -143,6 +145,42 @@ MODULE_PARM_DESC(debug, " Network interface message level setting");
static const u32 default_msg_level = (NETIF_MSG_LINK | NETIF_MSG_IFDOWN |
NETIF_MSG_IFUP);
static const u32 xgbe_serdes_blwc[] = {
XGBE_SPEED_1000_BLWC,
XGBE_SPEED_2500_BLWC,
XGBE_SPEED_10000_BLWC,
};
static const u32 xgbe_serdes_cdr_rate[] = {
XGBE_SPEED_1000_CDR,
XGBE_SPEED_2500_CDR,
XGBE_SPEED_10000_CDR,
};
static const u32 xgbe_serdes_pq_skew[] = {
XGBE_SPEED_1000_PQ,
XGBE_SPEED_2500_PQ,
XGBE_SPEED_10000_PQ,
};
static const u32 xgbe_serdes_tx_amp[] = {
XGBE_SPEED_1000_TXAMP,
XGBE_SPEED_2500_TXAMP,
XGBE_SPEED_10000_TXAMP,
};
static const u32 xgbe_serdes_dfe_tap_cfg[] = {
XGBE_SPEED_1000_DFE_TAP_CONFIG,
XGBE_SPEED_2500_DFE_TAP_CONFIG,
XGBE_SPEED_10000_DFE_TAP_CONFIG,
};
static const u32 xgbe_serdes_dfe_tap_ena[] = {
XGBE_SPEED_1000_DFE_TAP_ENABLE,
XGBE_SPEED_2500_DFE_TAP_ENABLE,
XGBE_SPEED_10000_DFE_TAP_ENABLE,
};
static void xgbe_default_config(struct xgbe_prv_data *pdata)
{
DBGPR("-->xgbe_default_config\n");
@ -160,8 +198,6 @@ static void xgbe_default_config(struct xgbe_prv_data *pdata)
pdata->rx_pause = 1;
pdata->phy_speed = SPEED_UNKNOWN;
pdata->power_down = 0;
pdata->default_autoneg = AUTONEG_ENABLE;
pdata->default_speed = SPEED_10000;
DBGPR("<--xgbe_default_config\n");
}
@ -169,6 +205,7 @@ static void xgbe_default_config(struct xgbe_prv_data *pdata)
static void xgbe_init_all_fptrs(struct xgbe_prv_data *pdata)
{
xgbe_init_function_ptrs_dev(&pdata->hw_if);
xgbe_init_function_ptrs_phy(&pdata->phy_if);
xgbe_init_function_ptrs_desc(&pdata->desc_if);
}
@ -255,23 +292,75 @@ static int xgbe_of_support(struct xgbe_prv_data *pdata)
return 0;
}
static struct platform_device *xgbe_of_get_phy_pdev(struct xgbe_prv_data *pdata)
{
struct device *dev = pdata->dev;
struct device_node *phy_node;
struct platform_device *phy_pdev;
phy_node = of_parse_phandle(dev->of_node, "phy-handle", 0);
if (!phy_node) {
dev_err(dev, "unable to locate phy device\n");
return NULL;
}
phy_pdev = of_find_device_by_node(phy_node);
of_node_put(phy_node);
return phy_pdev;
}
#else /* CONFIG_OF */
static int xgbe_of_support(struct xgbe_prv_data *pdata)
{
return -EINVAL;
}
#endif /*CONFIG_OF */
static struct platform_device *xgbe_of_get_phy_pdev(struct xgbe_prv_data *pdata)
{
return NULL;
}
#endif /* CONFIG_OF */
static unsigned int xgbe_resource_count(struct platform_device *pdev,
unsigned int type)
{
unsigned int count;
int i;
for (i = 0, count = 0; i < pdev->num_resources; i++) {
struct resource *res = &pdev->resource[i];
if (type == resource_type(res))
count++;
}
return count;
}
static struct platform_device *xgbe_get_phy_pdev(struct xgbe_prv_data *pdata)
{
struct platform_device *phy_pdev;
if (pdata->use_acpi) {
get_device(pdata->dev);
phy_pdev = pdata->pdev;
} else {
phy_pdev = xgbe_of_get_phy_pdev(pdata);
}
return phy_pdev;
}
static int xgbe_probe(struct platform_device *pdev)
{
struct xgbe_prv_data *pdata;
struct xgbe_hw_if *hw_if;
struct xgbe_desc_if *desc_if;
struct net_device *netdev;
struct device *dev = &pdev->dev;
struct device *dev = &pdev->dev, *phy_dev;
struct platform_device *phy_pdev;
struct resource *res;
const char *phy_mode;
unsigned int i;
unsigned int i, phy_memnum, phy_irqnum;
int ret;
DBGPR("--> xgbe_probe\n");
@ -298,9 +387,34 @@ static int xgbe_probe(struct platform_device *pdev)
pdata->msg_enable = netif_msg_init(debug, default_msg_level);
set_bit(XGBE_DOWN, &pdata->dev_state);
/* Check if we should use ACPI or DT */
pdata->use_acpi = (!pdata->adev || acpi_disabled) ? 0 : 1;
phy_pdev = xgbe_get_phy_pdev(pdata);
if (!phy_pdev) {
dev_err(dev, "unable to obtain phy device\n");
ret = -EINVAL;
goto err_phydev;
}
phy_dev = &phy_pdev->dev;
if (pdev == phy_pdev) {
/* ACPI:
* The XGBE and PHY resources are grouped together with
* the PHY resources listed last
*/
phy_memnum = xgbe_resource_count(pdev, IORESOURCE_MEM) - 3;
phy_irqnum = xgbe_resource_count(pdev, IORESOURCE_IRQ) - 1;
} else {
/* Device tree:
* The XGBE and PHY resources are separate
*/
phy_memnum = 0;
phy_irqnum = 0;
}
/* Set and validate the number of descriptors for a ring */
BUILD_BUG_ON_NOT_POWER_OF_2(XGBE_TX_DESC_CNT);
pdata->tx_desc_count = XGBE_TX_DESC_CNT;
@ -340,6 +454,36 @@ static int xgbe_probe(struct platform_device *pdev)
if (netif_msg_probe(pdata))
dev_dbg(dev, "xpcs_regs = %p\n", pdata->xpcs_regs);
res = platform_get_resource(phy_pdev, IORESOURCE_MEM, phy_memnum++);
pdata->rxtx_regs = devm_ioremap_resource(dev, res);
if (IS_ERR(pdata->rxtx_regs)) {
dev_err(dev, "rxtx ioremap failed\n");
ret = PTR_ERR(pdata->rxtx_regs);
goto err_io;
}
if (netif_msg_probe(pdata))
dev_dbg(dev, "rxtx_regs = %p\n", pdata->rxtx_regs);
res = platform_get_resource(phy_pdev, IORESOURCE_MEM, phy_memnum++);
pdata->sir0_regs = devm_ioremap_resource(dev, res);
if (IS_ERR(pdata->sir0_regs)) {
dev_err(dev, "sir0 ioremap failed\n");
ret = PTR_ERR(pdata->sir0_regs);
goto err_io;
}
if (netif_msg_probe(pdata))
dev_dbg(dev, "sir0_regs = %p\n", pdata->sir0_regs);
res = platform_get_resource(phy_pdev, IORESOURCE_MEM, phy_memnum++);
pdata->sir1_regs = devm_ioremap_resource(dev, res);
if (IS_ERR(pdata->sir1_regs)) {
dev_err(dev, "sir1 ioremap failed\n");
ret = PTR_ERR(pdata->sir1_regs);
goto err_io;
}
if (netif_msg_probe(pdata))
dev_dbg(dev, "sir1_regs = %p\n", pdata->sir1_regs);
/* Retrieve the MAC address */
ret = device_property_read_u8_array(dev, XGBE_MAC_ADDR_PROPERTY,
pdata->mac_addr,
@ -366,6 +510,115 @@ static int xgbe_probe(struct platform_device *pdev)
if (device_property_present(dev, XGBE_DMA_IRQS_PROPERTY))
pdata->per_channel_irq = 1;
/* Retrieve the PHY speedset */
ret = device_property_read_u32(phy_dev, XGBE_SPEEDSET_PROPERTY,
&pdata->speed_set);
if (ret) {
dev_err(dev, "invalid %s property\n", XGBE_SPEEDSET_PROPERTY);
goto err_io;
}
switch (pdata->speed_set) {
case XGBE_SPEEDSET_1000_10000:
case XGBE_SPEEDSET_2500_10000:
break;
default:
dev_err(dev, "invalid %s property\n", XGBE_SPEEDSET_PROPERTY);
ret = -EINVAL;
goto err_io;
}
/* Retrieve the PHY configuration properties */
if (device_property_present(phy_dev, XGBE_BLWC_PROPERTY)) {
ret = device_property_read_u32_array(phy_dev,
XGBE_BLWC_PROPERTY,
pdata->serdes_blwc,
XGBE_SPEEDS);
if (ret) {
dev_err(dev, "invalid %s property\n",
XGBE_BLWC_PROPERTY);
goto err_io;
}
} else {
memcpy(pdata->serdes_blwc, xgbe_serdes_blwc,
sizeof(pdata->serdes_blwc));
}
if (device_property_present(phy_dev, XGBE_CDR_RATE_PROPERTY)) {
ret = device_property_read_u32_array(phy_dev,
XGBE_CDR_RATE_PROPERTY,
pdata->serdes_cdr_rate,
XGBE_SPEEDS);
if (ret) {
dev_err(dev, "invalid %s property\n",
XGBE_CDR_RATE_PROPERTY);
goto err_io;
}
} else {
memcpy(pdata->serdes_cdr_rate, xgbe_serdes_cdr_rate,
sizeof(pdata->serdes_cdr_rate));
}
if (device_property_present(phy_dev, XGBE_PQ_SKEW_PROPERTY)) {
ret = device_property_read_u32_array(phy_dev,
XGBE_PQ_SKEW_PROPERTY,
pdata->serdes_pq_skew,
XGBE_SPEEDS);
if (ret) {
dev_err(dev, "invalid %s property\n",
XGBE_PQ_SKEW_PROPERTY);
goto err_io;
}
} else {
memcpy(pdata->serdes_pq_skew, xgbe_serdes_pq_skew,
sizeof(pdata->serdes_pq_skew));
}
if (device_property_present(phy_dev, XGBE_TX_AMP_PROPERTY)) {
ret = device_property_read_u32_array(phy_dev,
XGBE_TX_AMP_PROPERTY,
pdata->serdes_tx_amp,
XGBE_SPEEDS);
if (ret) {
dev_err(dev, "invalid %s property\n",
XGBE_TX_AMP_PROPERTY);
goto err_io;
}
} else {
memcpy(pdata->serdes_tx_amp, xgbe_serdes_tx_amp,
sizeof(pdata->serdes_tx_amp));
}
if (device_property_present(phy_dev, XGBE_DFE_CFG_PROPERTY)) {
ret = device_property_read_u32_array(phy_dev,
XGBE_DFE_CFG_PROPERTY,
pdata->serdes_dfe_tap_cfg,
XGBE_SPEEDS);
if (ret) {
dev_err(dev, "invalid %s property\n",
XGBE_DFE_CFG_PROPERTY);
goto err_io;
}
} else {
memcpy(pdata->serdes_dfe_tap_cfg, xgbe_serdes_dfe_tap_cfg,
sizeof(pdata->serdes_dfe_tap_cfg));
}
if (device_property_present(phy_dev, XGBE_DFE_ENA_PROPERTY)) {
ret = device_property_read_u32_array(phy_dev,
XGBE_DFE_ENA_PROPERTY,
pdata->serdes_dfe_tap_ena,
XGBE_SPEEDS);
if (ret) {
dev_err(dev, "invalid %s property\n",
XGBE_DFE_ENA_PROPERTY);
goto err_io;
}
} else {
memcpy(pdata->serdes_dfe_tap_ena, xgbe_serdes_dfe_tap_ena,
sizeof(pdata->serdes_dfe_tap_ena));
}
/* Obtain device settings unique to ACPI/OF */
if (pdata->use_acpi)
ret = xgbe_acpi_support(pdata);
@ -393,17 +646,23 @@ static int xgbe_probe(struct platform_device *pdev)
}
pdata->dev_irq = ret;
/* Get the auto-negotiation interrupt */
ret = platform_get_irq(phy_pdev, phy_irqnum++);
if (ret < 0) {
dev_err(dev, "platform_get_irq phy 0 failed\n");
goto err_io;
}
pdata->an_irq = ret;
netdev->irq = pdata->dev_irq;
netdev->base_addr = (unsigned long)pdata->xgmac_regs;
memcpy(netdev->dev_addr, pdata->mac_addr, netdev->addr_len);
/* Set all the function pointers */
xgbe_init_all_fptrs(pdata);
hw_if = &pdata->hw_if;
desc_if = &pdata->desc_if;
/* Issue software reset to device */
hw_if->exit(pdata);
pdata->hw_if.exit(pdata);
/* Populate the hardware features */
xgbe_get_all_hw_features(pdata);
@ -458,16 +717,8 @@ static int xgbe_probe(struct platform_device *pdev)
XGMAC_SET_BITS(pdata->rss_options, MAC_RSSCR, TCP4TE, 1);
XGMAC_SET_BITS(pdata->rss_options, MAC_RSSCR, UDP4TE, 1);
/* Prepare to regsiter with MDIO */
pdata->mii_bus_id = kasprintf(GFP_KERNEL, "%s", pdev->name);
if (!pdata->mii_bus_id) {
dev_err(dev, "failed to allocate mii bus id\n");
ret = -ENOMEM;
goto err_io;
}
ret = xgbe_mdio_register(pdata);
if (ret)
goto err_bus_id;
/* Call MDIO/PHY initialization routine */
pdata->phy_if.phy_init(pdata);
/* Set device operations */
netdev->netdev_ops = xgbe_get_netdev_ops();
@ -512,26 +763,52 @@ static int xgbe_probe(struct platform_device *pdev)
ret = register_netdev(netdev);
if (ret) {
dev_err(dev, "net device registration failed\n");
goto err_reg_netdev;
goto err_io;
}
/* Create the PHY/ANEG name based on netdev name */
snprintf(pdata->an_name, sizeof(pdata->an_name) - 1, "%s-pcs",
netdev_name(netdev));
/* Create workqueues */
pdata->dev_workqueue =
create_singlethread_workqueue(netdev_name(netdev));
if (!pdata->dev_workqueue) {
netdev_err(netdev, "device workqueue creation failed\n");
ret = -ENOMEM;
goto err_netdev;
}
pdata->an_workqueue =
create_singlethread_workqueue(pdata->an_name);
if (!pdata->an_workqueue) {
netdev_err(netdev, "phy workqueue creation failed\n");
ret = -ENOMEM;
goto err_wq;
}
xgbe_ptp_register(pdata);
xgbe_debugfs_init(pdata);
platform_device_put(phy_pdev);
netdev_notice(netdev, "net device enabled\n");
DBGPR("<-- xgbe_probe\n");
return 0;
err_reg_netdev:
xgbe_mdio_unregister(pdata);
err_wq:
destroy_workqueue(pdata->dev_workqueue);
err_bus_id:
kfree(pdata->mii_bus_id);
err_netdev:
unregister_netdev(netdev);
err_io:
platform_device_put(phy_pdev);
err_phydev:
free_netdev(netdev);
err_alloc:
@ -551,12 +828,14 @@ static int xgbe_remove(struct platform_device *pdev)
xgbe_ptp_unregister(pdata);
flush_workqueue(pdata->an_workqueue);
destroy_workqueue(pdata->an_workqueue);
flush_workqueue(pdata->dev_workqueue);
destroy_workqueue(pdata->dev_workqueue);
unregister_netdev(netdev);
xgbe_mdio_unregister(pdata);
kfree(pdata->mii_bus_id);
free_netdev(netdev);
DBGPR("<--xgbe_remove\n");
@ -568,16 +847,17 @@ static int xgbe_remove(struct platform_device *pdev)
static int xgbe_suspend(struct device *dev)
{
struct net_device *netdev = dev_get_drvdata(dev);
int ret;
struct xgbe_prv_data *pdata = netdev_priv(netdev);
int ret = 0;
DBGPR("-->xgbe_suspend\n");
if (!netif_running(netdev)) {
DBGPR("<--xgbe_dev_suspend\n");
return -EINVAL;
}
if (netif_running(netdev))
ret = xgbe_powerdown(netdev, XGMAC_DRIVER_CONTEXT);
ret = xgbe_powerdown(netdev, XGMAC_DRIVER_CONTEXT);
pdata->lpm_ctrl = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL1);
pdata->lpm_ctrl |= MDIO_CTRL1_LPOWER;
XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL1, pdata->lpm_ctrl);
DBGPR("<--xgbe_suspend\n");
@ -587,16 +867,16 @@ static int xgbe_suspend(struct device *dev)
static int xgbe_resume(struct device *dev)
{
struct net_device *netdev = dev_get_drvdata(dev);
int ret;
struct xgbe_prv_data *pdata = netdev_priv(netdev);
int ret = 0;
DBGPR("-->xgbe_resume\n");
if (!netif_running(netdev)) {
DBGPR("<--xgbe_dev_resume\n");
return -EINVAL;
}
pdata->lpm_ctrl &= ~MDIO_CTRL1_LPOWER;
XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL1, pdata->lpm_ctrl);
ret = xgbe_powerup(netdev, XGMAC_DRIVER_CONTEXT);
if (netif_running(netdev))
ret = xgbe_powerup(netdev, XGMAC_DRIVER_CONTEXT);
DBGPR("<--xgbe_resume\n");

1175
drivers/net/ethernet/amd/xgbe/xgbe-mdio.c
View File

File diff suppressed because it is too large Load Diff

205
drivers/net/ethernet/amd/xgbe/xgbe.h
View File

@ -129,7 +129,7 @@
#include <net/dcbnl.h>
#define XGBE_DRV_NAME "amd-xgbe"
#define XGBE_DRV_VERSION "1.0.0-a"
#define XGBE_DRV_VERSION "1.0.1"
#define XGBE_DRV_DESC "AMD 10 Gigabit Ethernet Driver"
/* Descriptor related defines */
@ -178,14 +178,17 @@
#define XGMAC_JUMBO_PACKET_MTU 9000
#define XGMAC_MAX_JUMBO_PACKET 9018
/* MDIO bus phy name */
#define XGBE_PHY_NAME "amd_xgbe_phy"
#define XGBE_PRTAD 0
/* Common property names */
#define XGBE_MAC_ADDR_PROPERTY "mac-address"
#define XGBE_PHY_MODE_PROPERTY "phy-mode"
#define XGBE_DMA_IRQS_PROPERTY "amd,per-channel-interrupt"
#define XGBE_SPEEDSET_PROPERTY "amd,speed-set"
#define XGBE_BLWC_PROPERTY "amd,serdes-blwc"
#define XGBE_CDR_RATE_PROPERTY "amd,serdes-cdr-rate"
#define XGBE_PQ_SKEW_PROPERTY "amd,serdes-pq-skew"
#define XGBE_TX_AMP_PROPERTY "amd,serdes-tx-amp"
#define XGBE_DFE_CFG_PROPERTY "amd,serdes-dfe-tap-config"
#define XGBE_DFE_ENA_PROPERTY "amd,serdes-dfe-tap-enable"
/* Device-tree clock names */
#define XGBE_DMA_CLOCK "dma_clk"
@ -241,6 +244,49 @@
#define XGBE_RSS_LOOKUP_TABLE_TYPE 0
#define XGBE_RSS_HASH_KEY_TYPE 1
/* Auto-negotiation */
#define XGBE_AN_MS_TIMEOUT 500
#define XGBE_LINK_TIMEOUT 10
#define XGBE_AN_INT_CMPLT 0x01
#define XGBE_AN_INC_LINK 0x02
#define XGBE_AN_PG_RCV 0x04
#define XGBE_AN_INT_MASK 0x07
/* Rate-change complete wait/retry count */
#define XGBE_RATECHANGE_COUNT 500
/* Default SerDes settings */
#define XGBE_SPEED_10000_BLWC 0
#define XGBE_SPEED_10000_CDR 0x7
#define XGBE_SPEED_10000_PLL 0x1
#define XGBE_SPEED_10000_PQ 0x12
#define XGBE_SPEED_10000_RATE 0x0
#define XGBE_SPEED_10000_TXAMP 0xa
#define XGBE_SPEED_10000_WORD 0x7
#define XGBE_SPEED_10000_DFE_TAP_CONFIG 0x1
#define XGBE_SPEED_10000_DFE_TAP_ENABLE 0x7f
#define XGBE_SPEED_2500_BLWC 1
#define XGBE_SPEED_2500_CDR 0x2
#define XGBE_SPEED_2500_PLL 0x0
#define XGBE_SPEED_2500_PQ 0xa
#define XGBE_SPEED_2500_RATE 0x1
#define XGBE_SPEED_2500_TXAMP 0xf
#define XGBE_SPEED_2500_WORD 0x1
#define XGBE_SPEED_2500_DFE_TAP_CONFIG 0x3
#define XGBE_SPEED_2500_DFE_TAP_ENABLE 0x0
#define XGBE_SPEED_1000_BLWC 1
#define XGBE_SPEED_1000_CDR 0x2
#define XGBE_SPEED_1000_PLL 0x0
#define XGBE_SPEED_1000_PQ 0xa
#define XGBE_SPEED_1000_RATE 0x3
#define XGBE_SPEED_1000_TXAMP 0xf
#define XGBE_SPEED_1000_WORD 0x1
#define XGBE_SPEED_1000_DFE_TAP_CONFIG 0x3
#define XGBE_SPEED_1000_DFE_TAP_ENABLE 0x0
struct xgbe_prv_data;
struct xgbe_packet_data {
@ -412,6 +458,13 @@ struct xgbe_channel {
struct xgbe_ring *rx_ring;
} ____cacheline_aligned;
enum xgbe_state {
XGBE_DOWN,
XGBE_LINK,
XGBE_LINK_INIT,
XGBE_LINK_ERR,
};
enum xgbe_int {
XGMAC_INT_DMA_CH_SR_TI,
XGMAC_INT_DMA_CH_SR_TPS,
@ -443,6 +496,55 @@ enum xgbe_mtl_fifo_size {
XGMAC_MTL_FIFO_SIZE_256K = 0x3ff,
};
enum xgbe_speed {
XGBE_SPEED_1000 = 0,
XGBE_SPEED_2500,
XGBE_SPEED_10000,
XGBE_SPEEDS,
};
enum xgbe_an {
XGBE_AN_READY = 0,
XGBE_AN_PAGE_RECEIVED,
XGBE_AN_INCOMPAT_LINK,
XGBE_AN_COMPLETE,
XGBE_AN_NO_LINK,
XGBE_AN_ERROR,
};
enum xgbe_rx {
XGBE_RX_BPA = 0,
XGBE_RX_XNP,
XGBE_RX_COMPLETE,
XGBE_RX_ERROR,
};
enum xgbe_mode {
XGBE_MODE_KR = 0,
XGBE_MODE_KX,
};
enum xgbe_speedset {
XGBE_SPEEDSET_1000_10000 = 0,
XGBE_SPEEDSET_2500_10000,
};
struct xgbe_phy {
u32 supported;
u32 advertising;
u32 lp_advertising;
int address;
int autoneg;
int speed;
int duplex;
int pause;
int asym_pause;
int link;
};
struct xgbe_mmc_stats {
/* Tx Stats */
u64 txoctetcount_gb;
@ -594,6 +696,20 @@ struct xgbe_hw_if {
int (*set_rss_lookup_table)(struct xgbe_prv_data *, const u32 *);
};
struct xgbe_phy_if {
/* For initial PHY setup */
void (*phy_init)(struct xgbe_prv_data *);
/* For PHY support when setting device up/down */
int (*phy_reset)(struct xgbe_prv_data *);
int (*phy_start)(struct xgbe_prv_data *);
void (*phy_stop)(struct xgbe_prv_data *);
/* For PHY support while device is up */
void (*phy_status)(struct xgbe_prv_data *);
int (*phy_config_aneg)(struct xgbe_prv_data *);
};
struct xgbe_desc_if {
int (*alloc_ring_resources)(struct xgbe_prv_data *);
void (*free_ring_resources)(struct xgbe_prv_data *);
@ -663,6 +779,9 @@ struct xgbe_prv_data {
/* XGMAC/XPCS related mmio registers */
void __iomem *xgmac_regs; /* XGMAC CSRs */
void __iomem *xpcs_regs; /* XPCS MMD registers */
void __iomem *rxtx_regs; /* SerDes Rx/Tx CSRs */
void __iomem *sir0_regs; /* SerDes integration registers (1/2) */
void __iomem *sir1_regs; /* SerDes integration registers (2/2) */
/* Overall device lock */
spinlock_t lock;
@ -673,10 +792,14 @@ struct xgbe_prv_data {
/* RSS addressing mutex */
struct mutex rss_mutex;
/* Flags representing xgbe_state */
unsigned long dev_state;
int dev_irq;
unsigned int per_channel_irq;
struct xgbe_hw_if hw_if;
struct xgbe_phy_if phy_if;
struct xgbe_desc_if desc_if;
/* AXI DMA settings */
@ -685,6 +808,11 @@ struct xgbe_prv_data {
unsigned int arcache;
unsigned int awcache;
/* Service routine support */
struct workqueue_struct *dev_workqueue;
struct work_struct service_work;
struct timer_list service_timer;
/* Rings for Tx/Rx on a DMA channel */
struct xgbe_channel *channel;
unsigned int channel_count;
@ -732,22 +860,6 @@ struct xgbe_prv_data {
u32 rss_table[XGBE_RSS_MAX_TABLE_SIZE];
u32 rss_options;
/* MDIO settings */
struct module *phy_module;
char *mii_bus_id;
struct mii_bus *mii;
int mdio_mmd;
struct phy_device *phydev;
int default_autoneg;
int default_speed;
/* Current PHY settings */
phy_interface_t phy_mode;
int phy_link;
int phy_speed;
unsigned int phy_tx_pause;
unsigned int phy_rx_pause;
/* Netdev related settings */
unsigned char mac_addr[ETH_ALEN];
netdev_features_t netdev_features;
@ -794,6 +906,53 @@ struct xgbe_prv_data {
/* Network interface message level setting */
u32 msg_enable;
/* Current PHY settings */
phy_interface_t phy_mode;
int phy_link;
int phy_speed;
unsigned int phy_tx_pause;
unsigned int phy_rx_pause;
/* MDIO/PHY related settings */
struct xgbe_phy phy;
int mdio_mmd;
unsigned long link_check;
char an_name[IFNAMSIZ + 32];
struct workqueue_struct *an_workqueue;
int an_irq;
struct work_struct an_irq_work;
unsigned int speed_set;
/* SerDes UEFI configurable settings.
* Switching between modes/speeds requires new values for some
* SerDes settings. The values can be supplied as device
* properties in array format. The first array entry is for
* 1GbE, second for 2.5GbE and third for 10GbE
*/
u32 serdes_blwc[XGBE_SPEEDS];
u32 serdes_cdr_rate[XGBE_SPEEDS];
u32 serdes_pq_skew[XGBE_SPEEDS];
u32 serdes_tx_amp[XGBE_SPEEDS];
u32 serdes_dfe_tap_cfg[XGBE_SPEEDS];
u32 serdes_dfe_tap_ena[XGBE_SPEEDS];
/* Auto-negotiation state machine support */
struct mutex an_mutex;
enum xgbe_an an_result;
enum xgbe_an an_state;
enum xgbe_rx kr_state;
enum xgbe_rx kx_state;
struct work_struct an_work;
unsigned int an_supported;
unsigned int parallel_detect;
unsigned int fec_ability;
unsigned long an_start;
unsigned int lpm_ctrl; /* CTRL1 for resume */
#ifdef CONFIG_DEBUG_FS
struct dentry *xgbe_debugfs;
@ -807,6 +966,7 @@ struct xgbe_prv_data {
/* Function prototypes*/
void xgbe_init_function_ptrs_dev(struct xgbe_hw_if *);
void xgbe_init_function_ptrs_phy(struct xgbe_phy_if *);
void xgbe_init_function_ptrs_desc(struct xgbe_desc_if *);
struct net_device_ops *xgbe_get_netdev_ops(void);
struct ethtool_ops *xgbe_get_ethtool_ops(void);
@ -814,9 +974,6 @@ struct ethtool_ops *xgbe_get_ethtool_ops(void);
const struct dcbnl_rtnl_ops *xgbe_get_dcbnl_ops(void);
#endif
int xgbe_mdio_register(struct xgbe_prv_data *);
void xgbe_mdio_unregister(struct xgbe_prv_data *);
void xgbe_dump_phy_registers(struct xgbe_prv_data *);
void xgbe_ptp_register(struct xgbe_prv_data *);
void xgbe_ptp_unregister(struct xgbe_prv_data *);
void xgbe_dump_tx_desc(struct xgbe_prv_data *, struct xgbe_ring *,

7
drivers/net/phy/Kconfig
View File

@ -24,13 +24,6 @@ config AMD_PHY
---help---
Currently supports the am79c874
config AMD_XGBE_PHY
tristate "Driver for the AMD 10GbE (amd-xgbe) PHYs"
depends on (OF || ACPI) && HAS_IOMEM
depends on ARM64 || COMPILE_TEST
---help---
Currently supports the AMD 10GbE PHY
config MARVELL_PHY
tristate "Drivers for Marvell PHYs"
---help---

1
drivers/net/phy/Makefile
View File

@ -33,5 +33,4 @@ obj-$(CONFIG_MDIO_BUS_MUX_GPIO) += mdio-mux-gpio.o
obj-$(CONFIG_MDIO_BUS_MUX_MMIOREG) += mdio-mux-mmioreg.o
obj-$(CONFIG_MDIO_SUN4I) += mdio-sun4i.o
obj-$(CONFIG_MDIO_MOXART) += mdio-moxart.o
obj-$(CONFIG_AMD_XGBE_PHY) += amd-xgbe-phy.o
obj-$(CONFIG_MDIO_BCM_UNIMAC) += mdio-bcm-unimac.o

1862
drivers/net/phy/amd-xgbe-phy.c
View File

File diff suppressed because it is too large Load Diff