xtensa: fix TLB multihit exceptions

- set _PAGE_USER in the pte_clear to avoid having TLB multihit exceptions
  (see following threads for more details);
  http://lists.linux-xtensa.org/pipermail/linux-xtensa/Week-of-Mon-20130401/
  http://lists.linux-xtensa.org/pipermail/linux-xtensa/Week-of-Mon-20130408/
- improved documentation of the PTE layout
- fix PTE mapping for present and 'prot_none' pages for T1050 hw and earlier
- fix pte_file offset and size
- add check for the correct number of bits for swap type

CC: piet.delaney@gmail.com
CC: jcmvbkbc@gmail.com
Signed-off-by: Chris Zankel <chris@zankel.net>
This commit is contained in:
Chris Zankel 2013-05-20 11:09:13 -07:00
parent f722406faa
commit 7711ece9b3

View File

@ -5,7 +5,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Copyright (C) 2001 - 2007 Tensilica Inc.
* Copyright (C) 2001 - 2013 Tensilica Inc.
*/
#ifndef _XTENSA_PGTABLE_H
@ -64,41 +64,82 @@
* Virtual memory area. We keep a distance to other memory regions to be
* on the safe side. We also use this area for cache aliasing.
*/
#define VMALLOC_START 0xC0000000
#define VMALLOC_END 0xC7FEFFFF
#define TLBTEMP_BASE_1 0xC7FF0000
#define TLBTEMP_BASE_2 0xC7FF8000
/*
* Xtensa Linux config PTE layout (when present):
* 31-12: PPN
* 11-6: Software
* 5-4: RING
* 3-0: CA
* For the Xtensa architecture, the PTE layout is as follows:
*
* Similar to the Alpha and MIPS ports, we need to keep track of the ref
* and mod bits in software. We have a software "you can read
* from this page" bit, and a hardware one which actually lets the
* process read from the page. On the same token we have a software
* writable bit and the real hardware one which actually lets the
* process write to the page.
* 31------12 11 10-9 8-6 5-4 3-2 1-0
* +-----------------------------------------+
* | | Software | HARDWARE |
* | PPN | ADW | RI |Attribute|
* +-----------------------------------------+
* pte_none | MBZ | 01 | 11 | 00 |
* +-----------------------------------------+
* present | PPN | 0 | 00 | ADW | RI | CA | wx |
* +- - - - - - - - - - - - - - - - - - - - -+
* (PAGE_NONE)| PPN | 0 | 00 | ADW | 01 | 11 | 11 |
* +-----------------------------------------+
* swap | index | type | 01 | 11 | 00 |
* +- - - - - - - - - - - - - - - - - - - - -+
* file | file offset | 01 | 11 | 10 |
* +-----------------------------------------+
*
* See further below for PTE layout for swapped-out pages.
* For T1050 hardware and earlier the layout differs for present and (PAGE_NONE)
* +-----------------------------------------+
* present | PPN | 0 | 00 | ADW | RI | CA | w1 |
* +-----------------------------------------+
* (PAGE_NONE)| PPN | 0 | 00 | ADW | 01 | 01 | 00 |
* +-----------------------------------------+
*
* Legend:
* PPN Physical Page Number
* ADW software: accessed (young) / dirty / writable
* RI ring (0=privileged, 1=user, 2 and 3 are unused)
* CA cache attribute: 00 bypass, 01 writeback, 10 writethrough
* (11 is invalid and used to mark pages that are not present)
* w page is writable (hw)
* x page is executable (hw)
* index swap offset / PAGE_SIZE (bit 11-31: 21 bits -> 8 GB)
* (note that the index is always non-zero)
* type swap type (5 bits -> 32 types)
* file offset 26-bit offset into the file, in increments of PAGE_SIZE
*
* Notes:
* - (PROT_NONE) is a special case of 'present' but causes an exception for
* any access (read, write, and execute).
* - 'multihit-exception' has the highest priority of all MMU exceptions,
* so the ring must be set to 'RING_USER' even for 'non-present' pages.
* - on older hardware, the exectuable flag was not supported and
* used as a 'valid' flag, so it needs to be always set.
* - we need to keep track of certain flags in software (dirty and young)
* to do this, we use write exceptions and have a separate software w-flag.
* - attribute value 1101 (and 1111 on T1050 and earlier) is reserved
*/
#define _PAGE_ATTRIB_MASK 0xf
#define _PAGE_HW_EXEC (1<<0) /* hardware: page is executable */
#define _PAGE_HW_WRITE (1<<1) /* hardware: page is writable */
#define _PAGE_FILE (1<<1) /* non-linear mapping, if !present */
#define _PAGE_PROTNONE (3<<0) /* special case for VM_PROT_NONE */
/* None of these cache modes include MP coherency: */
#define _PAGE_CA_BYPASS (0<<2) /* bypass, non-speculative */
#define _PAGE_CA_WB (1<<2) /* write-back */
#define _PAGE_CA_WT (2<<2) /* write-through */
#define _PAGE_CA_MASK (3<<2)
#define _PAGE_INVALID (3<<2)
#define _PAGE_CA_INVALID (3<<2)
/* We use invalid attribute values to distinguish special pte entries */
#if XCHAL_HW_VERSION_MAJOR < 2000
#define _PAGE_HW_VALID 0x01 /* older HW needed this bit set */
#define _PAGE_NONE 0x04
#else
#define _PAGE_HW_VALID 0x00
#define _PAGE_NONE 0x0f
#endif
#define _PAGE_FILE (1<<1) /* file mapped page, only if !present */
#define _PAGE_USER (1<<4) /* user access (ring=1) */
@ -108,19 +149,12 @@
#define _PAGE_DIRTY (1<<7) /* software: page dirty */
#define _PAGE_ACCESSED (1<<8) /* software: page accessed (read) */
/* On older HW revisions, we always have to set bit 0 */
#if XCHAL_HW_VERSION_MAJOR < 2000
# define _PAGE_VALID (1<<0)
#else
# define _PAGE_VALID 0
#endif
#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY)
#define _PAGE_PRESENT (_PAGE_VALID | _PAGE_CA_WB | _PAGE_ACCESSED)
#ifdef CONFIG_MMU
#define PAGE_NONE __pgprot(_PAGE_INVALID | _PAGE_USER | _PAGE_PROTNONE)
#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY)
#define _PAGE_PRESENT (_PAGE_HW_VALID | _PAGE_CA_WB | _PAGE_ACCESSED)
#define PAGE_NONE __pgprot(_PAGE_NONE | _PAGE_USER)
#define PAGE_COPY __pgprot(_PAGE_PRESENT | _PAGE_USER)
#define PAGE_COPY_EXEC __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_HW_EXEC)
#define PAGE_READONLY __pgprot(_PAGE_PRESENT | _PAGE_USER)
@ -132,9 +166,9 @@
#define PAGE_KERNEL_EXEC __pgprot(_PAGE_PRESENT|_PAGE_HW_WRITE|_PAGE_HW_EXEC)
#if (DCACHE_WAY_SIZE > PAGE_SIZE)
# define _PAGE_DIRECTORY (_PAGE_VALID | _PAGE_ACCESSED)
# define _PAGE_DIRECTORY (_PAGE_HW_VALID | _PAGE_ACCESSED | _PAGE_CA_BYPASS)
#else
# define _PAGE_DIRECTORY (_PAGE_VALID | _PAGE_ACCESSED | _PAGE_CA_WB)
# define _PAGE_DIRECTORY (_PAGE_HW_VALID | _PAGE_ACCESSED | _PAGE_CA_WB)
#endif
#else /* no mmu */
@ -202,12 +236,16 @@ static inline void pgtable_cache_init(void) { }
/*
* pte status.
*/
#define pte_none(pte) (pte_val(pte) == _PAGE_INVALID)
#define pte_present(pte) \
(((pte_val(pte) & _PAGE_CA_MASK) != _PAGE_INVALID) \
|| ((pte_val(pte) & _PAGE_PROTNONE) == _PAGE_PROTNONE))
# define pte_none(pte) (pte_val(pte) == (_PAGE_CA_INVALID | _PAGE_USER))
#if XCHAL_HW_VERSION_MAJOR < 2000
# define pte_present(pte) ((pte_val(pte) & _PAGE_CA_MASK) != _PAGE_CA_INVALID)
#else
# define pte_present(pte) \
(((pte_val(pte) & _PAGE_CA_MASK) != _PAGE_CA_INVALID) \
|| ((pte_val(pte) & _PAGE_ATTRIB_MASK) == _PAGE_NONE))
#endif
#define pte_clear(mm,addr,ptep) \
do { update_pte(ptep, __pte(_PAGE_INVALID)); } while(0)
do { update_pte(ptep, __pte(_PAGE_CA_INVALID | _PAGE_USER)); } while (0)
#define pmd_none(pmd) (!pmd_val(pmd))
#define pmd_present(pmd) (pmd_val(pmd) & PAGE_MASK)
@ -328,35 +366,23 @@ ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
/*
* Encode and decode a swap entry.
*
* Format of swap pte:
* bit 0 MBZ
* bit 1 page-file (must be zero)
* bits 2 - 3 page hw access mode (must be 11: _PAGE_INVALID)
* bits 4 - 5 ring protection (must be 01: _PAGE_USER)
* bits 6 - 10 swap type (5 bits -> 32 types)
* bits 11 - 31 swap offset / PAGE_SIZE (21 bits -> 8GB)
* Format of file pte:
* bit 0 MBZ
* bit 1 page-file (must be one: _PAGE_FILE)
* bits 2 - 3 page hw access mode (must be 11: _PAGE_INVALID)
* bits 4 - 5 ring protection (must be 01: _PAGE_USER)
* bits 6 - 31 file offset / PAGE_SIZE
* Encode and decode a swap and file entry.
*/
#define SWP_TYPE_BITS 5
#define MAX_SWAPFILES_CHECK() BUILD_BUG_ON(MAX_SWAPFILES_SHIFT > SWP_TYPE_BITS)
#define __swp_type(entry) (((entry).val >> 6) & 0x1f)
#define __swp_offset(entry) ((entry).val >> 11)
#define __swp_entry(type,offs) \
((swp_entry_t) {((type) << 6) | ((offs) << 11) | _PAGE_INVALID})
((swp_entry_t){((type) << 6) | ((offs) << 11) | \
_PAGE_CA_INVALID | _PAGE_USER})
#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
#define __swp_entry_to_pte(x) ((pte_t) { (x).val })
#define PTE_FILE_MAX_BITS 28
#define pte_to_pgoff(pte) (pte_val(pte) >> 4)
#define PTE_FILE_MAX_BITS 26
#define pte_to_pgoff(pte) (pte_val(pte) >> 6)
#define pgoff_to_pte(off) \
((pte_t) { ((off) << 4) | _PAGE_INVALID | _PAGE_FILE })
((pte_t) { ((off) << 6) | _PAGE_CA_INVALID | _PAGE_FILE | _PAGE_USER })
#endif /* !defined (__ASSEMBLY__) */