Merge tag 'drm-intel-next-2015-03-13-merge' of git://anongit.freedesktop.org/drm-intel into drm-next

drm-intel-next-2015-03-13-rebased:
- EU count report param for gen9+ (Jeff McGee)
- piles of pll/wm/... fixes for chv, finally out of preliminary hw support
  (Ville, Vijay)
- gen9 rps support from Akash
- more work to move towards atomic from Matt, Ander and others
- runtime pm support for skl (Damien)
- edp1.4 intermediate link clock support (Sonika)
- use frontbuffer tracking for fbc (Paulo)
- remove ilk rc6 (John Harrison)
- a bunch of smaller things and fixes all over

Includes backmerge because git rerere couldn't keep up any more.

* tag 'drm-intel-next-2015-03-13-merge' of git://anongit.freedesktop.org/drm-intel: (366 commits)
  drm/i915: Make sure the primary plane is enabled before reading out the fb state
  drm/i915: Update DRIVER_DATE to 20150313
  drm/i915: Fix vmap_batch page iterator overrun
  drm/i915: Export total subslice and EU counts
  drm/i915: redefine WARN_ON_ONCE to include the condition
  drm/i915/skl: Implement WaDisableHBR2
  drm/i915: Remove the preliminary_hw_support shackles from CHV
  drm/i915: Read CHV_PLL_DW8 from the correct offset
  drm/i915: Rewrite IVB FDI bifurcation conflict checks
  drm/i915: Rewrite some some of the FDI lane checks
  drm/i915/skl: Enable the RPS interrupts programming
  drm/i915/skl: Enabling processing of Turbo interrupts
  drm/i915/skl: Updated the i915_frequency_info debugfs function
  drm/i915: Simplify the way BC bifurcation state consistency is kept
  drm/i915/skl: Updated the act_freq_mhz_show sysfs function
  drm/i915/skl: Updated the gen9_enable_rps function
  drm/i915/skl: Updated the gen6_rps_limits function
  drm/i915/skl: Restructured the gen6_set_rps_thresholds function
  drm/i915/skl: Updated the gen6_set_rps function
  drm/i915/skl: Updated the gen6_init_rps_frequencies function
  ...

Documentation/devicetree/bindings/arm/exynos/power_domain.txt

@@ -22,6 +22,8 @@ Optional Properties:
 	- pclkN, clkN: Pairs of parent of input clock and input clock to the
 		devices in this power domain. Maximum of 4 pairs (N = 0 to 3)
 		are supported currently.
+- power-domains: phandle pointing to the parent power domain, for more details
+		 see Documentation/devicetree/bindings/power/power_domain.txt
 
 Node of a device using power domains must have a power-domains property
 defined with a phandle to respective power domain.

Documentation/devicetree/bindings/arm/sti.txt

@@ -13,6 +13,10 @@ Boards with the ST STiH407 SoC shall have the following properties:
 Required root node property:
 compatible = "st,stih407";
 
+Boards with the ST STiH410 SoC shall have the following properties:
+Required root node property:
+compatible = "st,stih410";
+
 Boards with the ST STiH418 SoC shall have the following properties:
 Required root node property:
 compatible = "st,stih418";

Documentation/devicetree/bindings/net/apm-xgene-enet.txt

@@ -4,7 +4,10 @@ Ethernet nodes are defined to describe on-chip ethernet interfaces in
 APM X-Gene SoC.
 
 Required properties for all the ethernet interfaces:
-- compatible: Should be "apm,xgene-enet"
+- compatible: Should state binding information from the following list,
+  - "apm,xgene-enet":    RGMII based 1G interface
+  - "apm,xgene1-sgenet": SGMII based 1G interface
+  - "apm,xgene1-xgenet": XFI based 10G interface
 - reg: Address and length of the register set for the device. It contains the
   information of registers in the same order as described by reg-names
 - reg-names: Should contain the register set names

Documentation/devicetree/bindings/power/power_domain.txt

@@ -19,6 +19,16 @@ Required properties:
    providing multiple PM domains (e.g. power controllers), but can be any value
    as specified by device tree binding documentation of particular provider.
 
+Optional properties:
+ - power-domains : A phandle and PM domain specifier as defined by bindings of
+                   the power controller specified by phandle.
+   Some power domains might be powered from another power domain (or have
+   other hardware specific dependencies). For representing such dependency
+   a standard PM domain consumer binding is used. When provided, all domains
+   created by the given provider should be subdomains of the domain
+   specified by this binding. More details about power domain specifier are
+   available in the next section.
+
 Example:
 
 	power: power-controller@12340000 {
@@ -30,6 +40,25 @@ Example:
 The node above defines a power controller that is a PM domain provider and
 expects one cell as its phandle argument.
 
+Example 2:
+
+	parent: power-controller@12340000 {
+		compatible = "foo,power-controller";
+		reg = <0x12340000 0x1000>;
+		#power-domain-cells = <1>;
+	};
+
+	child: power-controller@12340000 {
+		compatible = "foo,power-controller";
+		reg = <0x12341000 0x1000>;
+		power-domains = <&parent 0>;
+		#power-domain-cells = <1>;
+	};
+
+The nodes above define two power controllers: 'parent' and 'child'.
+Domains created by the 'child' power controller are subdomains of '0' power
+domain provided by the 'parent' power controller.
+
 ==PM domain consumers==
 
 Required properties:

Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt

@@ -0,0 +1,19 @@
+ETRAX FS UART
+
+Required properties:
+- compatible : "axis,etraxfs-uart"
+- reg: offset and length of the register set for the device.
+- interrupts: device interrupt
+
+Optional properties:
+- {dtr,dsr,ri,cd}-gpios: specify a GPIO for DTR/DSR/RI/CD
+  line respectively.
+
+Example:
+
+serial@b00260000 {
+	compatible = "axis,etraxfs-uart";
+	reg = <0xb0026000 0x1000>;
+	interrupts = <68>;
+	status = "disabled";
+};

Documentation/devicetree/bindings/submitting-patches.txt

@@ -12,6 +12,9 @@ I. For patch submitters
 
        devicetree@vger.kernel.org
 
+     and Cc: the DT maintainers. Use scripts/get_maintainer.pl to identify
+     all of the DT maintainers.
+
   3) The Documentation/ portion of the patch should come in the series before
      the code implementing the binding.
 

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -20,6 +20,7 @@ amlogic	Amlogic, Inc.
 ams	AMS AG
 amstaos	AMS-Taos Inc.
 apm	Applied Micro Circuits Corporation (APM)
+arasan	Arasan Chip Systems
 arm	ARM Ltd.
 armadeus	ARMadeus Systems SARL
 asahi-kasei	Asahi Kasei Corp.
@@ -27,6 +28,7 @@ atmel	Atmel Corporation
 auo	AU Optronics Corporation
 avago	Avago Technologies
 avic	Shanghai AVIC Optoelectronics Co., Ltd.
+axis	Axis Communications AB
 bosch	Bosch Sensortec GmbH
 brcm	Broadcom Corporation
 buffalo	Buffalo, Inc.

Documentation/devicetree/bindings/watchdog/atmel-wdt.txt

@@ -26,6 +26,11 @@ Optional properties:
 - atmel,disable : Should be present if you want to disable the watchdog.
 - atmel,idle-halt : Should be present if you want to stop the watchdog when
 	entering idle state.
+	CAUTION: This property should be used with care, it actually makes the
+	watchdog not counting when the CPU is in idle state, therefore the
+	watchdog reset time depends on mean CPU usage and will not reset at all
+	if the CPU stop working while it is in idle state, which is probably
+	not what you want.
 - atmel,dbg-halt : Should be present if you want to stop the watchdog when
 	entering debug state.
 

MAINTAINERS

@@ -1030,6 +1030,16 @@ F:	arch/arm/mach-mxs/
 F:	arch/arm/boot/dts/imx*
 F:	arch/arm/configs/imx*_defconfig
 
+ARM/FREESCALE VYBRID ARM ARCHITECTURE
+M:	Shawn Guo <shawn.guo@linaro.org>
+M:	Sascha Hauer <kernel@pengutronix.de>
+R:	Stefan Agner <stefan@agner.ch>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git
+F:	arch/arm/mach-imx/*vf610*
+F:	arch/arm/boot/dts/vf*
+
 ARM/GLOMATION GESBC9312SX MACHINE SUPPORT
 M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -1188,6 +1198,7 @@ ARM/Marvell Dove/MV78xx0/Orion SOC support
 M:	Jason Cooper <jason@lakedaemon.net>
 M:	Andrew Lunn <andrew@lunn.ch>
 M:	Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+M:	Gregory Clement <gregory.clement@free-electrons.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/mach-dove/
@@ -2107,7 +2118,6 @@ F:	drivers/net/ethernet/broadcom/bnx2x/
 
 BROADCOM BCM281XX/BCM11XXX/BCM216XX ARM ARCHITECTURE
 M:	Christian Daudt <bcm@fixthebug.org>
-M:	Matt Porter <mporter@linaro.org>
 M:	Florian Fainelli <f.fainelli@gmail.com>
 L:	bcm-kernel-feedback-list@broadcom.com
 T:	git git://github.com/broadcom/mach-bcm
@@ -2369,8 +2379,9 @@ F:	arch/x86/include/asm/tce.h
 
 CAN NETWORK LAYER
 M:	Oliver Hartkopp <socketcan@hartkopp.net>
+M:	Marc Kleine-Budde <mkl@pengutronix.de>
 L:	linux-can@vger.kernel.org
-W:	http://gitorious.org/linux-can
+W:	https://github.com/linux-can
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next.git
 S:	Maintained
@@ -2386,7 +2397,7 @@ CAN NETWORK DRIVERS
 M:	Wolfgang Grandegger <wg@grandegger.com>
 M:	Marc Kleine-Budde <mkl@pengutronix.de>
 L:	linux-can@vger.kernel.org
-W:	http://gitorious.org/linux-can
+W:	https://github.com/linux-can
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next.git
 S:	Maintained

Makefile

@@ -1,7 +1,7 @@
 VERSION = 4
 PATCHLEVEL = 0
 SUBLEVEL = 0
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc4
 NAME = Hurr durr I'ma sheep
 
 # *DOCUMENTATION*

arch/arm/Makefile

@@ -150,6 +150,7 @@ machine-$(CONFIG_ARCH_BERLIN)		+= berlin
 machine-$(CONFIG_ARCH_CLPS711X)		+= clps711x
 machine-$(CONFIG_ARCH_CNS3XXX)		+= cns3xxx
 machine-$(CONFIG_ARCH_DAVINCI)		+= davinci
+machine-$(CONFIG_ARCH_DIGICOLOR)	+= digicolor
 machine-$(CONFIG_ARCH_DOVE)		+= dove
 machine-$(CONFIG_ARCH_EBSA110)		+= ebsa110
 machine-$(CONFIG_ARCH_EFM32)		+= efm32

arch/arm/boot/dts/am335x-bone-common.dtsi

@@ -301,3 +301,11 @@
 	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
 	cd-inverted;
 };
+
+&aes {
+	status = "okay";
+};
+
+&sham {
+	status = "okay";
+};

arch/arm/boot/dts/am335x-bone.dts

@@ -24,11 +24,3 @@
 &mmc1 {
 	vmmc-supply = <&ldo3_reg>;
 };
-
-&sham {
-	status = "okay";
-};
-
-&aes {
-	status = "okay";
-};

arch/arm/boot/dts/am335x-lxm.dts

@@ -328,6 +328,10 @@
 	dual_emac_res_vlan = <3>;
 };
 
+&phy_sel {
+	rmii-clock-ext;
+};
+
 &mac {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&cpsw_default>;

arch/arm/boot/dts/am33xx-clocks.dtsi

@@ -99,7 +99,7 @@
 	ehrpwm0_tbclk: ehrpwm0_tbclk@44e10664 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
+		clocks = <&l4ls_gclk>;
 		ti,bit-shift = <0>;
 		reg = <0x0664>;
 	};
@@ -107,7 +107,7 @@
 	ehrpwm1_tbclk: ehrpwm1_tbclk@44e10664 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
+		clocks = <&l4ls_gclk>;
 		ti,bit-shift = <1>;
 		reg = <0x0664>;
 	};
@@ -115,7 +115,7 @@
 	ehrpwm2_tbclk: ehrpwm2_tbclk@44e10664 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
+		clocks = <&l4ls_gclk>;
 		ti,bit-shift = <2>;
 		reg = <0x0664>;
 	};

arch/arm/boot/dts/am43xx-clocks.dtsi

@@ -107,7 +107,7 @@
 	ehrpwm0_tbclk: ehrpwm0_tbclk {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
+		clocks = <&l4ls_gclk>;
 		ti,bit-shift = <0>;
 		reg = <0x0664>;
 	};
@@ -115,7 +115,7 @@
 	ehrpwm1_tbclk: ehrpwm1_tbclk {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
+		clocks = <&l4ls_gclk>;
 		ti,bit-shift = <1>;
 		reg = <0x0664>;
 	};
@@ -123,7 +123,7 @@
 	ehrpwm2_tbclk: ehrpwm2_tbclk {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
+		clocks = <&l4ls_gclk>;
 		ti,bit-shift = <2>;
 		reg = <0x0664>;
 	};
@@ -131,7 +131,7 @@
 	ehrpwm3_tbclk: ehrpwm3_tbclk {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
+		clocks = <&l4ls_gclk>;
 		ti,bit-shift = <4>;
 		reg = <0x0664>;
 	};
@@ -139,7 +139,7 @@
 	ehrpwm4_tbclk: ehrpwm4_tbclk {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
+		clocks = <&l4ls_gclk>;
 		ti,bit-shift = <5>;
 		reg = <0x0664>;
 	};
@@ -147,7 +147,7 @@
 	ehrpwm5_tbclk: ehrpwm5_tbclk {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
+		clocks = <&l4ls_gclk>;
 		ti,bit-shift = <6>;
 		reg = <0x0664>;
 	};

arch/arm/boot/dts/at91sam9260.dtsi

@@ -494,12 +494,12 @@
 
 					pinctrl_usart3_rts: usart3_rts-0 {
 						atmel,pins =
-							<AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC8 periph B */
+							<AT91_PIOC 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 					};
 
 					pinctrl_usart3_cts: usart3_cts-0 {
 						atmel,pins =
-							<AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC10 periph B */
+							<AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 					};
 				};
 
@@ -853,7 +853,7 @@
 			};
 
 			usb1: gadget@fffa4000 {
-				compatible = "atmel,at91rm9200-udc";
+				compatible = "atmel,at91sam9260-udc";
 				reg = <0xfffa4000 0x4000>;
 				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>;
 				clocks = <&udc_clk>, <&udpck>;
@@ -976,7 +976,6 @@
 				atmel,watchdog-type = "hardware";
 				atmel,reset-type = "all";
 				atmel,dbg-halt;
-				atmel,idle-halt;
 				status = "disabled";
 			};
 

arch/arm/boot/dts/at91sam9261.dtsi

@@ -124,11 +124,12 @@
 			};
 
 			usb1: gadget@fffa4000 {
-				compatible = "atmel,at91rm9200-udc";
+				compatible = "atmel,at91sam9261-udc";
 				reg = <0xfffa4000 0x4000>;
 				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>;
-				clocks = <&usb>, <&udc_clk>, <&udpck>;
+				clocks = <&udc_clk>, <&udpck>;
-				clock-names = "usb_clk", "udc_clk", "udpck";
+				clock-names = "pclk", "hclk";
+				atmel,matrix = <&matrix>;
 				status = "disabled";
 			};
 
@@ -262,7 +263,7 @@
 			};
 
 			matrix: matrix@ffffee00 {
-				compatible = "atmel,at91sam9260-bus-matrix";
+				compatible = "atmel,at91sam9260-bus-matrix", "syscon";
 				reg = <0xffffee00 0x200>;
 			};
 

arch/arm/boot/dts/at91sam9263.dtsi

@@ -69,7 +69,7 @@
 
 	sram1: sram@00500000 {
 		compatible = "mmio-sram";
-		reg = <0x00300000 0x4000>;
+		reg = <0x00500000 0x4000>;
 	};
 
 	ahb {
@@ -856,7 +856,7 @@
 			};
 
 			usb1: gadget@fff78000 {
-				compatible = "atmel,at91rm9200-udc";
+				compatible = "atmel,at91sam9263-udc";
 				reg = <0xfff78000 0x4000>;
 				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 2>;
 				clocks = <&udc_clk>, <&udpck>;
@@ -905,7 +905,6 @@
 				atmel,watchdog-type = "hardware";
 				atmel,reset-type = "all";
 				atmel,dbg-halt;
-				atmel,idle-halt;
 				status = "disabled";
 			};
 

arch/arm/boot/dts/at91sam9g45.dtsi

@@ -1116,7 +1116,6 @@
 				atmel,watchdog-type = "hardware";
 				atmel,reset-type = "all";
 				atmel,dbg-halt;
-				atmel,idle-halt;
 				status = "disabled";
 			};
 
@@ -1301,7 +1300,7 @@
 			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
 			reg = <0x00800000 0x100000>;
 			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
+			clocks = <&utmi>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
 			clock-names = "usb_clk", "ehci_clk", "hclk", "uhpck";
 			status = "disabled";
 		};

arch/arm/boot/dts/at91sam9n12.dtsi

@@ -894,7 +894,6 @@
 				atmel,watchdog-type = "hardware";
 				atmel,reset-type = "all";
 				atmel,dbg-halt;
-				atmel,idle-halt;
 				status = "disabled";
 			};
 

arch/arm/boot/dts/at91sam9x5.dtsi

@@ -1066,7 +1066,7 @@
 				reg = <0x00500000 0x80000
 				       0xf803c000 0x400>;
 				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&usb>, <&udphs_clk>;
+				clocks = <&utmi>, <&udphs_clk>;
 				clock-names = "hclk", "pclk";
 				status = "disabled";
 
@@ -1130,7 +1130,6 @@
 				atmel,watchdog-type = "hardware";
 				atmel,reset-type = "all";
 				atmel,dbg-halt;
-				atmel,idle-halt;
 				status = "disabled";
 			};
 
@@ -1186,7 +1185,7 @@
 			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
 			reg = <0x00700000 0x100000>;
 			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&usb>, <&uhphs_clk>, <&uhpck>;
+			clocks = <&utmi>, <&uhphs_clk>, <&uhpck>;
 			clock-names = "usb_clk", "ehci_clk", "uhpck";
 			status = "disabled";
 		};

arch/arm/boot/dts/dra7-evm.dts

@@ -263,17 +263,15 @@
 
 	dcan1_pins_default: dcan1_pins_default {
 		pinctrl-single,pins = <
-			0x3d0   (PIN_OUTPUT | MUX_MODE0) /* dcan1_tx */
+			0x3d0   (PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
-			0x3d4   (MUX_MODE15)		/* dcan1_rx.off */
+			0x418   (PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */
-			0x418   (PULL_DIS | MUX_MODE1) /* wakeup0.dcan1_rx */
 		>;
 	};
 
 	dcan1_pins_sleep: dcan1_pins_sleep {
 		pinctrl-single,pins = <
-			0x3d0   (MUX_MODE15)	/* dcan1_tx.off */
+			0x3d0   (MUX_MODE15 | PULL_UP)	/* dcan1_tx.off */
-			0x3d4   (MUX_MODE15)	/* dcan1_rx.off */
+			0x418   (MUX_MODE15 | PULL_UP)	/* wakeup0.off */
-			0x418   (MUX_MODE15)	/* wakeup0.off */
 		>;
 	};
 };

arch/arm/boot/dts/dra72-evm.dts

@@ -119,17 +119,15 @@
 
 	dcan1_pins_default: dcan1_pins_default {
 		pinctrl-single,pins = <
-			0x3d0   (PIN_OUTPUT | MUX_MODE0) /* dcan1_tx */
+			0x3d0   (PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
-			0x3d4   (MUX_MODE15)		/* dcan1_rx.off */
+			0x418   (PULL_UP | MUX_MODE1)	/* wakeup0.dcan1_rx */
-			0x418   (PULL_DIS | MUX_MODE1) /* wakeup0.dcan1_rx */
 		>;
 	};
 
 	dcan1_pins_sleep: dcan1_pins_sleep {
 		pinctrl-single,pins = <
-			0x3d0   (MUX_MODE15)	/* dcan1_tx.off */
+			0x3d0   (MUX_MODE15 | PULL_UP)	/* dcan1_tx.off */
-			0x3d4   (MUX_MODE15)	/* dcan1_rx.off */
+			0x418   (MUX_MODE15 | PULL_UP)	/* wakeup0.off */
-			0x418   (MUX_MODE15)	/* wakeup0.off */
 		>;
 	};
 

arch/arm/boot/dts/dra7xx-clocks.dtsi

@@ -243,10 +243,18 @@
 		ti,invert-autoidle-bit;
 	};
 
+	dpll_core_byp_mux: dpll_core_byp_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+		ti,bit-shift = <23>;
+		reg = <0x012c>;
+	};
+
 	dpll_core_ck: dpll_core_ck {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-core-clock";
-		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+		clocks = <&sys_clkin1>, <&dpll_core_byp_mux>;
 		reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>;
 	};
 
@@ -309,10 +317,18 @@
 		clock-div = <1>;
 	};
 
+	dpll_dsp_byp_mux: dpll_dsp_byp_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&dsp_dpll_hs_clk_div>;
+		ti,bit-shift = <23>;
+		reg = <0x0240>;
+	};
+
 	dpll_dsp_ck: dpll_dsp_ck {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin1>, <&dsp_dpll_hs_clk_div>;
+		clocks = <&sys_clkin1>, <&dpll_dsp_byp_mux>;
 		reg = <0x0234>, <0x0238>, <0x0240>, <0x023c>;
 	};
 
@@ -335,10 +351,18 @@
 		clock-div = <1>;
 	};
 
+	dpll_iva_byp_mux: dpll_iva_byp_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&iva_dpll_hs_clk_div>;
+		ti,bit-shift = <23>;
+		reg = <0x01ac>;
+	};
+
 	dpll_iva_ck: dpll_iva_ck {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin1>, <&iva_dpll_hs_clk_div>;
+		clocks = <&sys_clkin1>, <&dpll_iva_byp_mux>;
 		reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>;
 	};
 
@@ -361,10 +385,18 @@
 		clock-div = <1>;
 	};
 
+	dpll_gpu_byp_mux: dpll_gpu_byp_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+		ti,bit-shift = <23>;
+		reg = <0x02e4>;
+	};
+
 	dpll_gpu_ck: dpll_gpu_ck {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+		clocks = <&sys_clkin1>, <&dpll_gpu_byp_mux>;
 		reg = <0x02d8>, <0x02dc>, <0x02e4>, <0x02e0>;
 	};
 
@@ -398,10 +430,18 @@
 		clock-div = <1>;
 	};
 
+	dpll_ddr_byp_mux: dpll_ddr_byp_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+		ti,bit-shift = <23>;
+		reg = <0x021c>;
+	};
+
 	dpll_ddr_ck: dpll_ddr_ck {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+		clocks = <&sys_clkin1>, <&dpll_ddr_byp_mux>;
 		reg = <0x0210>, <0x0214>, <0x021c>, <0x0218>;
 	};
 
@@ -416,10 +456,18 @@
 		ti,invert-autoidle-bit;
 	};
 
+	dpll_gmac_byp_mux: dpll_gmac_byp_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+		ti,bit-shift = <23>;
+		reg = <0x02b4>;
+	};
+
 	dpll_gmac_ck: dpll_gmac_ck {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+		clocks = <&sys_clkin1>, <&dpll_gmac_byp_mux>;
 		reg = <0x02a8>, <0x02ac>, <0x02b4>, <0x02b0>;
 	};
 
@@ -482,10 +530,18 @@
 		clock-div = <1>;
 	};
 
+	dpll_eve_byp_mux: dpll_eve_byp_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&eve_dpll_hs_clk_div>;
+		ti,bit-shift = <23>;
+		reg = <0x0290>;
+	};
+
 	dpll_eve_ck: dpll_eve_ck {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin1>, <&eve_dpll_hs_clk_div>;
+		clocks = <&sys_clkin1>, <&dpll_eve_byp_mux>;
 		reg = <0x0284>, <0x0288>, <0x0290>, <0x028c>;
 	};
 
@@ -1249,10 +1305,18 @@
 		clock-div = <1>;
 	};
 
+	dpll_per_byp_mux: dpll_per_byp_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&per_dpll_hs_clk_div>;
+		ti,bit-shift = <23>;
+		reg = <0x014c>;
+	};
+
 	dpll_per_ck: dpll_per_ck {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin1>, <&per_dpll_hs_clk_div>;
+		clocks = <&sys_clkin1>, <&dpll_per_byp_mux>;
 		reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>;
 	};
 
@@ -1275,10 +1339,18 @@
 		clock-div = <1>;
 	};
 
+	dpll_usb_byp_mux: dpll_usb_byp_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&usb_dpll_hs_clk_div>;
+		ti,bit-shift = <23>;
+		reg = <0x018c>;
+	};
+
 	dpll_usb_ck: dpll_usb_ck {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-j-type-clock";
-		clocks = <&sys_clkin1>, <&usb_dpll_hs_clk_div>;
+		clocks = <&sys_clkin1>, <&dpll_usb_byp_mux>;
 		reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>;
 	};
 

arch/arm/boot/dts/exynos3250.dtsi

@@ -18,6 +18,7 @@
  */
 
 #include "skeleton.dtsi"
+#include "exynos4-cpu-thermal.dtsi"
 #include <dt-bindings/clock/exynos3250.h>
 
 / {
@@ -193,6 +194,7 @@
 			interrupts = <0 216 0>;
 			clocks = <&cmu CLK_TMU_APBIF>;
 			clock-names = "tmu_apbif";
+			#include "exynos4412-tmu-sensor-conf.dtsi"
 			status = "disabled";
 		};
 

arch/arm/boot/dts/exynos4-cpu-thermal.dtsi

@@ -0,0 +1,52 @@
+/*
+ * Device tree sources for Exynos4 thermal zone
+ *
+ * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+thermal-zones {
+	cpu_thermal: cpu-thermal {
+		thermal-sensors = <&tmu 0>;
+		polling-delay-passive = <0>;
+		polling-delay = <0>;
+		trips {
+			cpu_alert0: cpu-alert-0 {
+				temperature = <70000>; /* millicelsius */
+				hysteresis = <10000>; /* millicelsius */
+				type = "active";
+			};
+			cpu_alert1: cpu-alert-1 {
+				temperature = <95000>; /* millicelsius */
+				hysteresis = <10000>; /* millicelsius */
+				type = "active";
+			};
+			cpu_alert2: cpu-alert-2 {
+				temperature = <110000>; /* millicelsius */
+				hysteresis = <10000>; /* millicelsius */
+				type = "active";
+			};
+			cpu_crit0: cpu-crit-0 {
+				temperature = <120000>; /* millicelsius */
+				hysteresis = <0>; /* millicelsius */
+				type = "critical";
+			};
+		};
+		cooling-maps {
+			map0 {
+				trip = <&cpu_alert0>;
+			};
+			map1 {
+				trip = <&cpu_alert1>;
+			};
+		};
+	};
+};
+};

arch/arm/boot/dts/exynos4.dtsi

@@ -38,6 +38,7 @@
 		i2c5 = &i2c_5;
 		i2c6 = &i2c_6;
 		i2c7 = &i2c_7;
+		i2c8 = &i2c_8;
 		csis0 = &csis_0;
 		csis1 = &csis_1;
 		fimc0 = &fimc_0;
@@ -104,6 +105,7 @@
 		compatible = "samsung,exynos4210-pd";
 		reg = <0x10023C20 0x20>;
 		#power-domain-cells = <0>;
+		power-domains = <&pd_lcd0>;
 	};
 
 	pd_cam: cam-power-domain@10023C00 {
@@ -554,6 +556,22 @@
 		status = "disabled";
 	};
 
+	i2c_8: i2c@138E0000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,s3c2440-hdmiphy-i2c";
+		reg = <0x138E0000 0x100>;
+		interrupts = <0 93 0>;
+		clocks = <&clock CLK_I2C_HDMI>;
+		clock-names = "i2c";
+		status = "disabled";
+
+		hdmi_i2c_phy: hdmiphy@38 {
+			compatible = "exynos4210-hdmiphy";
+			reg = <0x38>;
+		};
+	};
+
 	spi_0: spi@13920000 {
 		compatible = "samsung,exynos4210-spi";
 		reg = <0x13920000 0x100>;
@@ -663,6 +681,33 @@
 		status = "disabled";
 	};
 
+	tmu: tmu@100C0000 {
+		#include "exynos4412-tmu-sensor-conf.dtsi"
+	};
+
+	hdmi: hdmi@12D00000 {
+		compatible = "samsung,exynos4210-hdmi";
+		reg = <0x12D00000 0x70000>;
+		interrupts = <0 92 0>;
+		clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy",
+			"mout_hdmi";
+		clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
+			<&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
+			<&clock CLK_MOUT_HDMI>;
+		phy = <&hdmi_i2c_phy>;
+		power-domains = <&pd_tv>;
+		samsung,syscon-phandle = <&pmu_system_controller>;
+		status = "disabled";
+	};
+
+	mixer: mixer@12C10000 {
+		compatible = "samsung,exynos4210-mixer";
+		interrupts = <0 91 0>;
+		reg = <0x12C10000 0x2100>, <0x12c00000 0x300>;
+		power-domains = <&pd_tv>;
+		status = "disabled";
+	};
+
 	ppmu_dmc0: ppmu_dmc0@106a0000 {
 		compatible = "samsung,exynos-ppmu";
 		reg = <0x106a0000 0x2000>;

arch/arm/boot/dts/exynos4210-trats.dts

@@ -426,6 +426,25 @@
 		status = "okay";
 	};
 
+	tmu@100C0000 {
+		status = "okay";
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			cooling-maps {
+				map0 {
+				     /* Corresponds to 800MHz at freq_table */
+				     cooling-device = <&cpu0 2 2>;
+				};
+				map1 {
+				     /* Corresponds to 200MHz at freq_table */
+				     cooling-device = <&cpu0 4 4>;
+			       };
+		       };
+		};
+	};
+
 	camera {
 		pinctrl-names = "default";
 		pinctrl-0 = <>;

arch/arm/boot/dts/exynos4210-universal_c210.dts

@@ -505,6 +505,63 @@
 			assigned-clock-rates = <0>, <160000000>;
 		};
 	};
+
+	hdmi_en: voltage-regulator-hdmi-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "HDMI_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpe0 1 0>;
+		enable-active-high;
+	};
+
+	hdmi_ddc: i2c-ddc {
+		compatible = "i2c-gpio";
+		gpios = <&gpe4 2 0 &gpe4 3 0>;
+		i2c-gpio,delay-us = <100>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pinctrl-0 = <&i2c_ddc_bus>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+
+	mixer@12C10000 {
+		status = "okay";
+	};
+
+	hdmi@12D00000 {
+		hpd-gpio = <&gpx3 7 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmi_hpd>;
+		hdmi-en-supply = <&hdmi_en>;
+		vdd-supply = <&ldo3_reg>;
+		vdd_osc-supply = <&ldo4_reg>;
+		vdd_pll-supply = <&ldo3_reg>;
+		ddc = <&hdmi_ddc>;
+		status = "okay";
+	};
+
+	i2c@138E0000 {
+		status = "okay";
+	};
+};
+
+&pinctrl_1 {
+	hdmi_hpd: hdmi-hpd {
+		samsung,pins = "gpx3-7";
+		samsung,pin-pud = <0>;
+	};
+};
+
+&pinctrl_0 {
+	i2c_ddc_bus: i2c-ddc-bus {
+		samsung,pins = "gpe4-2", "gpe4-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
 };
 
 &mdma1 {

arch/arm/boot/dts/exynos4210.dtsi

@@ -21,6 +21,7 @@
 
 #include "exynos4.dtsi"
 #include "exynos4210-pinctrl.dtsi"
+#include "exynos4-cpu-thermal.dtsi"
 
 / {
 	compatible = "samsung,exynos4210", "samsung,exynos4";
@@ -35,10 +36,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu@900 {
+		cpu0: cpu@900 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0x900>;
+			cooling-min-level = <4>;
+			cooling-max-level = <2>;
+			#cooling-cells = <2>; /* min followed by max */
 		};
 
 		cpu@901 {
@@ -153,16 +157,38 @@
 		reg = <0x03860000 0x1000>;
 	};
 
-	tmu@100C0000 {
+	tmu: tmu@100C0000 {
 		compatible = "samsung,exynos4210-tmu";
 		interrupt-parent = <&combiner>;
 		reg = <0x100C0000 0x100>;
 		interrupts = <2 4>;
 		clocks = <&clock CLK_TMU_APBIF>;
 		clock-names = "tmu_apbif";
+		samsung,tmu_gain = <15>;
+		samsung,tmu_reference_voltage = <7>;
 		status = "disabled";
 	};
 
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tmu 0>;
+
+			trips {
+			      cpu_alert0: cpu-alert-0 {
+				      temperature = <85000>; /* millicelsius */
+			      };
+			      cpu_alert1: cpu-alert-1 {
+				      temperature = <100000>; /* millicelsius */
+			      };
+			      cpu_alert2: cpu-alert-2 {
+				      temperature = <110000>; /* millicelsius */
+			      };
+			};
+		};
+	};
+
 	g2d@12800000 {
 		compatible = "samsung,s5pv210-g2d";
 		reg = <0x12800000 0x1000>;
@@ -203,6 +229,14 @@
 		};
 	};
 
+	mixer: mixer@12C10000 {
+		clock-names = "mixer", "hdmi", "sclk_hdmi", "vp", "mout_mixer",
+			"sclk_mixer";
+		clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
+			<&clock CLK_SCLK_HDMI>, <&clock CLK_VP>,
+			<&clock CLK_MOUT_MIXER>, <&clock CLK_SCLK_MIXER>;
+	};
+
 	ppmu_lcd1: ppmu_lcd1@12240000 {
 		compatible = "samsung,exynos-ppmu";
 		reg = <0x12240000 0x2000>;

arch/arm/boot/dts/exynos4212.dtsi

@@ -26,10 +26,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu@A00 {
+		cpu0: cpu@A00 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0xA00>;
+			cooling-min-level = <13>;
+			cooling-max-level = <7>;
+			#cooling-cells = <2>; /* min followed by max */
 		};
 
 		cpu@A01 {

arch/arm/boot/dts/exynos4412-odroid-common.dtsi

@@ -249,6 +249,20 @@
 					regulator-always-on;
 				};
 
+				ldo8_reg: ldo@8 {
+					regulator-compatible = "LDO8";
+					regulator-name = "VDD10_HDMI_1.0V";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+				};
+
+				ldo10_reg: ldo@10 {
+					regulator-compatible = "LDO10";
+					regulator-name = "VDDQ_MIPIHSI_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
 				ldo11_reg: LDO11 {
 					regulator-name = "VDD18_ABB1_1.8V";
 					regulator-min-microvolt = <1800000>;
@@ -411,6 +425,51 @@
 	ehci: ehci@12580000 {
 		status = "okay";
 	};
+
+	tmu@100C0000 {
+		vtmu-supply = <&ldo10_reg>;
+		status = "okay";
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			cooling-maps {
+				map0 {
+				     /* Corresponds to 800MHz at freq_table */
+				     cooling-device = <&cpu0 7 7>;
+				};
+				map1 {
+				     /* Corresponds to 200MHz at freq_table */
+				     cooling-device = <&cpu0 13 13>;
+			       };
+		       };
+		};
+	};
+
+	mixer: mixer@12C10000 {
+		status = "okay";
+	};
+
+	hdmi@12D00000 {
+		hpd-gpio = <&gpx3 7 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmi_hpd>;
+		vdd-supply = <&ldo8_reg>;
+		vdd_osc-supply = <&ldo10_reg>;
+		vdd_pll-supply = <&ldo8_reg>;
+		ddc = <&hdmi_ddc>;
+		status = "okay";
+	};
+
+	hdmi_ddc: i2c@13880000 {
+		status = "okay";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_bus>;
+	};
+
+	i2c@138E0000 {
+		status = "okay";
+	};
 };
 
 &pinctrl_1 {
@@ -425,4 +484,9 @@
 		samsung,pin-pud = <0>;
 		samsung,pin-drv = <0>;
 	};
+
+	hdmi_hpd: hdmi-hpd {
+		samsung,pins = "gpx3-7";
+		samsung,pin-pud = <1>;
+	};
 };

arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi

@@ -0,0 +1,24 @@
+/*
+ * Device tree sources for Exynos4412 TMU sensor configuration
+ *
+ * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <dt-bindings/thermal/thermal_exynos.h>
+
+#thermal-sensor-cells = <0>;
+samsung,tmu_gain = <8>;
+samsung,tmu_reference_voltage = <16>;
+samsung,tmu_noise_cancel_mode = <4>;
+samsung,tmu_efuse_value = <55>;
+samsung,tmu_min_efuse_value = <40>;
+samsung,tmu_max_efuse_value = <100>;
+samsung,tmu_first_point_trim = <25>;
+samsung,tmu_second_point_trim = <85>;
+samsung,tmu_default_temp_offset = <50>;
+samsung,tmu_cal_type = <TYPE_ONE_POINT_TRIMMING>;

arch/arm/boot/dts/exynos4412-trats2.dts

@@ -927,6 +927,21 @@
 		pulldown-ohm = <100000>; /* 100K */
 		io-channels = <&adc 2>;  /* Battery temperature */
 	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			cooling-maps {
+				map0 {
+				     /* Corresponds to 800MHz at freq_table */
+				     cooling-device = <&cpu0 7 7>;
+				};
+				map1 {
+				     /* Corresponds to 200MHz at freq_table */
+				     cooling-device = <&cpu0 13 13>;
+			       };
+		       };
+		};
+	};
 };
 
 &pmu_system_controller {

arch/arm/boot/dts/exynos4412.dtsi

@@ -26,10 +26,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu@A00 {
+		cpu0: cpu@A00 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0xA00>;
+			cooling-min-level = <13>;
+			cooling-max-level = <7>;
+			#cooling-cells = <2>; /* min followed by max */
 		};
 
 		cpu@A01 {

arch/arm/boot/dts/exynos4x12.dtsi

@@ -19,6 +19,7 @@
 
 #include "exynos4.dtsi"
 #include "exynos4x12-pinctrl.dtsi"
+#include "exynos4-cpu-thermal.dtsi"
 
 / {
 	aliases {
@@ -297,4 +298,15 @@
 		clock-names = "tmu_apbif";
 		status = "disabled";
 	};
+
+	hdmi: hdmi@12D00000 {
+		compatible = "samsung,exynos4212-hdmi";
+	};
+
+	mixer: mixer@12C10000 {
+		compatible = "samsung,exynos4212-mixer";
+		clock-names = "mixer", "hdmi", "sclk_hdmi", "vp";
+		clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
+			 <&clock CLK_SCLK_HDMI>, <&clock CLK_VP>;
+	};
 };

arch/arm/boot/dts/exynos5250.dtsi

@@ -20,7 +20,7 @@
 #include <dt-bindings/clock/exynos5250.h>
 #include "exynos5.dtsi"
 #include "exynos5250-pinctrl.dtsi"
-
+#include "exynos4-cpu-thermal.dtsi"
 #include <dt-bindings/clock/exynos-audss-clk.h>
 
 / {
@@ -58,11 +58,14 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu@0 {
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0>;
 			clock-frequency = <1700000000>;
+			cooling-min-level = <15>;
+			cooling-max-level = <9>;
+			#cooling-cells = <2>; /* min followed by max */
 		};
 		cpu@1 {
 			device_type = "cpu";
@@ -102,6 +105,12 @@
 		#power-domain-cells = <0>;
 	};
 
+	pd_disp1: disp1-power-domain@100440A0 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x100440A0 0x20>;
+		#power-domain-cells = <0>;
+	};
+
 	clock: clock-controller@10010000 {
 		compatible = "samsung,exynos5250-clock";
 		reg = <0x10010000 0x30000>;
@@ -235,12 +244,32 @@
 		status = "disabled";
 	};
 
-	tmu@10060000 {
+	tmu: tmu@10060000 {
 		compatible = "samsung,exynos5250-tmu";
 		reg = <0x10060000 0x100>;
 		interrupts = <0 65 0>;
 		clocks = <&clock CLK_TMU>;
 		clock-names = "tmu_apbif";
+		#include "exynos4412-tmu-sensor-conf.dtsi"
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tmu 0>;
+
+			cooling-maps {
+				map0 {
+				     /* Corresponds to 800MHz at freq_table */
+				     cooling-device = <&cpu0 9 9>;
+				};
+				map1 {
+				     /* Corresponds to 200MHz at freq_table */
+				     cooling-device = <&cpu0 15 15>;
+			       };
+		       };
+		};
 	};
 
 	serial@12C00000 {
@@ -719,6 +748,7 @@
 	hdmi: hdmi {
 		compatible = "samsung,exynos4212-hdmi";
 		reg = <0x14530000 0x70000>;
+		power-domains = <&pd_disp1>;
 		interrupts = <0 95 0>;
 		clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
 			 <&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
@@ -731,9 +761,11 @@
 	mixer {
 		compatible = "samsung,exynos5250-mixer";
 		reg = <0x14450000 0x10000>;
+		power-domains = <&pd_disp1>;
 		interrupts = <0 94 0>;
-		clocks = <&clock CLK_MIXER>, <&clock CLK_SCLK_HDMI>;
+		clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
-		clock-names = "mixer", "sclk_hdmi";
+			 <&clock CLK_SCLK_HDMI>;
+		clock-names = "mixer", "hdmi", "sclk_hdmi";
 	};
 
 	dp_phy: video-phy@10040720 {
@@ -743,6 +775,7 @@
 	};
 
 	dp: dp-controller@145B0000 {
+		power-domains = <&pd_disp1>;
 		clocks = <&clock CLK_DP>;
 		clock-names = "dp";
 		phys = <&dp_phy>;
@@ -750,6 +783,7 @@
 	};
 
 	fimd: fimd@14400000 {
+		power-domains = <&pd_disp1>;
 		clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
 		clock-names = "sclk_fimd", "fimd";
 	};

arch/arm/boot/dts/exynos5420-trip-points.dtsi

@@ -0,0 +1,35 @@
+/*
+ * Device tree sources for default Exynos5420 thermal zone definition
+ *
+ * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+polling-delay-passive = <0>;
+polling-delay = <0>;
+trips {
+	cpu-alert-0 {
+		temperature = <85000>; /* millicelsius */
+		hysteresis = <10000>; /* millicelsius */
+		type = "active";
+	};
+	cpu-alert-1 {
+		temperature = <103000>; /* millicelsius */
+		hysteresis = <10000>; /* millicelsius */
+		type = "active";
+	};
+	cpu-alert-2 {
+		temperature = <110000>; /* millicelsius */
+		hysteresis = <10000>; /* millicelsius */
+		type = "active";
+	};
+	cpu-crit-0 {
+		temperature = <1200000>; /* millicelsius */
+		hysteresis = <0>; /* millicelsius */
+		type = "critical";
+	};
+};

arch/arm/boot/dts/exynos5420.dtsi

@@ -740,8 +740,9 @@
 		compatible = "samsung,exynos5420-mixer";
 		reg = <0x14450000 0x10000>;
 		interrupts = <0 94 0>;
-		clocks = <&clock CLK_MIXER>, <&clock CLK_SCLK_HDMI>;
+		clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
-		clock-names = "mixer", "sclk_hdmi";
+			 <&clock CLK_SCLK_HDMI>;
+		clock-names = "mixer", "hdmi", "sclk_hdmi";
 		power-domains = <&disp_pd>;
 	};
 
@@ -782,6 +783,7 @@
 		interrupts = <0 65 0>;
 		clocks = <&clock CLK_TMU>;
 		clock-names = "tmu_apbif";
+		#include "exynos4412-tmu-sensor-conf.dtsi"
 	};
 
 	tmu_cpu1: tmu@10064000 {
@@ -790,6 +792,7 @@
 		interrupts = <0 183 0>;
 		clocks = <&clock CLK_TMU>;
 		clock-names = "tmu_apbif";
+		#include "exynos4412-tmu-sensor-conf.dtsi"
 	};
 
 	tmu_cpu2: tmu@10068000 {
@@ -798,6 +801,7 @@
 		interrupts = <0 184 0>;
 		clocks = <&clock CLK_TMU>, <&clock CLK_TMU>;
 		clock-names = "tmu_apbif", "tmu_triminfo_apbif";
+		#include "exynos4412-tmu-sensor-conf.dtsi"
 	};
 
 	tmu_cpu3: tmu@1006c000 {
@@ -806,6 +810,7 @@
 		interrupts = <0 185 0>;
 		clocks = <&clock CLK_TMU>, <&clock CLK_TMU_GPU>;
 		clock-names = "tmu_apbif", "tmu_triminfo_apbif";
+		#include "exynos4412-tmu-sensor-conf.dtsi"
 	};
 
 	tmu_gpu: tmu@100a0000 {
@@ -814,6 +819,30 @@
 		interrupts = <0 215 0>;
 		clocks = <&clock CLK_TMU_GPU>, <&clock CLK_TMU>;
 		clock-names = "tmu_apbif", "tmu_triminfo_apbif";
+		#include "exynos4412-tmu-sensor-conf.dtsi"
+	};
+
+	thermal-zones {
+		cpu0_thermal: cpu0-thermal {
+			thermal-sensors = <&tmu_cpu0>;
+			#include "exynos5420-trip-points.dtsi"
+		};
+		cpu1_thermal: cpu1-thermal {
+		       thermal-sensors = <&tmu_cpu1>;
+		       #include "exynos5420-trip-points.dtsi"
+		};
+		cpu2_thermal: cpu2-thermal {
+		       thermal-sensors = <&tmu_cpu2>;
+		       #include "exynos5420-trip-points.dtsi"
+		};
+		cpu3_thermal: cpu3-thermal {
+		       thermal-sensors = <&tmu_cpu3>;
+		       #include "exynos5420-trip-points.dtsi"
+		};
+		gpu_thermal: gpu-thermal {
+		       thermal-sensors = <&tmu_gpu>;
+		       #include "exynos5420-trip-points.dtsi"
+		};
 	};
 
         watchdog: watchdog@101D0000 {

arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi

@@ -0,0 +1,24 @@
+/*
+ * Device tree sources for Exynos5440 TMU sensor configuration
+ *
+ * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <dt-bindings/thermal/thermal_exynos.h>
+
+#thermal-sensor-cells = <0>;
+samsung,tmu_gain = <5>;
+samsung,tmu_reference_voltage = <16>;
+samsung,tmu_noise_cancel_mode = <4>;
+samsung,tmu_efuse_value = <0x5d2d>;
+samsung,tmu_min_efuse_value = <16>;
+samsung,tmu_max_efuse_value = <76>;
+samsung,tmu_first_point_trim = <25>;
+samsung,tmu_second_point_trim = <70>;
+samsung,tmu_default_temp_offset = <25>;
+samsung,tmu_cal_type = <TYPE_ONE_POINT_TRIMMING>;

arch/arm/boot/dts/exynos5440-trip-points.dtsi

@@ -0,0 +1,25 @@
+/*
+ * Device tree sources for default Exynos5440 thermal zone definition
+ *
+ * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+polling-delay-passive = <0>;
+polling-delay = <0>;
+trips {
+	cpu-alert-0 {
+		temperature = <100000>; /* millicelsius */
+		hysteresis = <0>; /* millicelsius */
+		type = "active";
+	};
+	cpu-crit-0 {
+		temperature = <1050000>; /* millicelsius */
+		hysteresis = <0>; /* millicelsius */
+		type = "critical";
+	};
+};

arch/arm/boot/dts/exynos5440.dtsi

@@ -219,6 +219,7 @@
 		interrupts = <0 58 0>;
 		clocks = <&clock CLK_B_125>;
 		clock-names = "tmu_apbif";
+		#include "exynos5440-tmu-sensor-conf.dtsi"
 	};
 
 	tmuctrl_1: tmuctrl@16011C {
@@ -227,6 +228,7 @@
 		interrupts = <0 58 0>;
 		clocks = <&clock CLK_B_125>;
 		clock-names = "tmu_apbif";
+		#include "exynos5440-tmu-sensor-conf.dtsi"
 	};
 
 	tmuctrl_2: tmuctrl@160120 {
@@ -235,6 +237,22 @@
 		interrupts = <0 58 0>;
 		clocks = <&clock CLK_B_125>;
 		clock-names = "tmu_apbif";
+		#include "exynos5440-tmu-sensor-conf.dtsi"
+	};
+
+	thermal-zones {
+		cpu0_thermal: cpu0-thermal {
+			thermal-sensors = <&tmuctrl_0>;
+			#include "exynos5440-trip-points.dtsi"
+		};
+		cpu1_thermal: cpu1-thermal {
+		       thermal-sensors = <&tmuctrl_1>;
+		       #include "exynos5440-trip-points.dtsi"
+		};
+		cpu2_thermal: cpu2-thermal {
+		       thermal-sensors = <&tmuctrl_2>;
+		       #include "exynos5440-trip-points.dtsi"
+		};
 	};
 
 	sata@210000 {

arch/arm/boot/dts/imx6qdl-sabresd.dtsi

@@ -35,6 +35,7 @@
 			regulator-max-microvolt = <5000000>;
 			gpio = <&gpio3 22 0>;
 			enable-active-high;
+			vin-supply = <&swbst_reg>;
 		};
 
 		reg_usb_h1_vbus: regulator@1 {
@@ -45,6 +46,7 @@
 			regulator-max-microvolt = <5000000>;
 			gpio = <&gpio1 29 0>;
 			enable-active-high;
+			vin-supply = <&swbst_reg>;
 		};
 
 		reg_audio: regulator@2 {

arch/arm/boot/dts/imx6sl-evk.dts

@@ -52,6 +52,7 @@
 			regulator-max-microvolt = <5000000>;
 			gpio = <&gpio4 0 0>;
 			enable-active-high;
+			vin-supply = <&swbst_reg>;
 		};
 
 		reg_usb_otg2_vbus: regulator@1 {
@@ -62,6 +63,7 @@
 			regulator-max-microvolt = <5000000>;
 			gpio = <&gpio4 2 0>;
 			enable-active-high;
+			vin-supply = <&swbst_reg>;
 		};
 
 		reg_aud3v: regulator@2 {

arch/arm/boot/dts/omap5-core-thermal.dtsi

@@ -13,7 +13,7 @@
 
 core_thermal: core_thermal {
 	polling-delay-passive = <250>; /* milliseconds */
-	polling-delay = <1000>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
 
 			/* sensor       ID */
 	thermal-sensors = <&bandgap     2>;

arch/arm/boot/dts/omap5-gpu-thermal.dtsi

@@ -13,7 +13,7 @@
 
 gpu_thermal: gpu_thermal {
 	polling-delay-passive = <250>; /* milliseconds */
-	polling-delay = <1000>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
 
 			/* sensor       ID */
 	thermal-sensors = <&bandgap     1>;

arch/arm/boot/dts/omap5.dtsi

@@ -1079,4 +1079,8 @@
 	};
 };
 
+&cpu_thermal {
+	polling-delay = <500>; /* milliseconds */
+};
+
 /include/ "omap54xx-clocks.dtsi"

arch/arm/boot/dts/omap54xx-clocks.dtsi

@@ -167,10 +167,18 @@
 		ti,index-starts-at-one;
 	};
 
+	dpll_core_byp_mux: dpll_core_byp_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin>, <&dpll_abe_m3x2_ck>;
+		ti,bit-shift = <23>;
+		reg = <0x012c>;
+	};
+
 	dpll_core_ck: dpll_core_ck {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-core-clock";
-		clocks = <&sys_clkin>, <&dpll_abe_m3x2_ck>;
+		clocks = <&sys_clkin>, <&dpll_core_byp_mux>;
 		reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>;
 	};
 
@@ -294,10 +302,18 @@
 		clock-div = <1>;
 	};
 
+	dpll_iva_byp_mux: dpll_iva_byp_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin>, <&iva_dpll_hs_clk_div>;
+		ti,bit-shift = <23>;
+		reg = <0x01ac>;
+	};
+
 	dpll_iva_ck: dpll_iva_ck {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin>, <&iva_dpll_hs_clk_div>;
+		clocks = <&sys_clkin>, <&dpll_iva_byp_mux>;
 		reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>;
 	};
 
@@ -599,10 +615,19 @@
 	};
 };
 &cm_core_clocks {
+
+	dpll_per_byp_mux: dpll_per_byp_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin>, <&per_dpll_hs_clk_div>;
+		ti,bit-shift = <23>;
+		reg = <0x014c>;
+	};
+
 	dpll_per_ck: dpll_per_ck {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin>, <&per_dpll_hs_clk_div>;
+		clocks = <&sys_clkin>, <&dpll_per_byp_mux>;
 		reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>;
 	};
 
@@ -714,10 +739,18 @@
 		ti,index-starts-at-one;
 	};
 
+	dpll_usb_byp_mux: dpll_usb_byp_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin>, <&usb_dpll_hs_clk_div>;
+		ti,bit-shift = <23>;
+		reg = <0x018c>;
+	};
+
 	dpll_usb_ck: dpll_usb_ck {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-j-type-clock";
-		clocks = <&sys_clkin>, <&usb_dpll_hs_clk_div>;
+		clocks = <&sys_clkin>, <&dpll_usb_byp_mux>;
 		reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>;
 	};
 

arch/arm/boot/dts/sama5d3.dtsi

@@ -1248,7 +1248,6 @@
 				atmel,watchdog-type = "hardware";
 				atmel,reset-type = "all";
 				atmel,dbg-halt;
-				atmel,idle-halt;
 				status = "disabled";
 			};
 
@@ -1416,7 +1415,7 @@
 			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
 			reg = <0x00700000 0x100000>;
 			interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&usb>, <&uhphs_clk>, <&uhpck>;
+			clocks = <&utmi>, <&uhphs_clk>, <&uhpck>;
 			clock-names = "usb_clk", "ehci_clk", "uhpck";
 			status = "disabled";
 		};

arch/arm/boot/dts/sama5d4.dtsi

@@ -66,6 +66,7 @@
 		gpio4 = &pioE;
 		tcb0 = &tcb0;
 		tcb1 = &tcb1;
+		i2c0 = &i2c0;
 		i2c2 = &i2c2;
 	};
 	cpus {
@@ -259,7 +260,7 @@
 			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
 			reg = <0x00600000 0x100000>;
 			interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&usb>, <&uhphs_clk>, <&uhpck>;
+			clocks = <&utmi>, <&uhphs_clk>, <&uhpck>;
 			clock-names = "usb_clk", "ehci_clk", "uhpck";
 			status = "disabled";
 		};
@@ -461,8 +462,8 @@
 
 					lcdck: lcdck {
 						#clock-cells = <0>;
-						reg = <4>;
+						reg = <3>;
-						clocks = <&smd>;
+						clocks = <&mck>;
 					};
 
 					smdck: smdck {
@@ -770,7 +771,7 @@
 						reg = <50>;
 					};
 
-					lcd_clk: lcd_clk {
+					lcdc_clk: lcdc_clk {
 						#clock-cells = <0>;
 						reg = <51>;
 					};

arch/arm/boot/dts/socfpga.dtsi

@@ -713,6 +713,9 @@
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&l4_sp_clk>;
+			dmas = <&pdma 28>,
+			       <&pdma 29>;
+			dma-names = "tx", "rx";
 		};
 
 		uart1: serial1@ffc03000 {
@@ -722,6 +725,9 @@
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&l4_sp_clk>;
+			dmas = <&pdma 30>,
+			       <&pdma 31>;
+			dma-names = "tx", "rx";
 		};
 
 		rst: rstmgr@ffd05000 {

arch/arm/configs/at91_dt_defconfig

@@ -70,6 +70,7 @@ CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_NETDEVICES=y
+CONFIG_ARM_AT91_ETHER=y
 CONFIG_MACB=y
 # CONFIG_NET_VENDOR_BROADCOM is not set
 CONFIG_DM9000=y

arch/arm/configs/multi_v7_defconfig

@@ -99,7 +99,7 @@ CONFIG_PCI_RCAR_GEN2=y
 CONFIG_PCI_RCAR_GEN2_PCIE=y
 CONFIG_PCIEPORTBUS=y
 CONFIG_SMP=y
-CONFIG_NR_CPUS=8
+CONFIG_NR_CPUS=16
 CONFIG_HIGHPTE=y
 CONFIG_CMA=y
 CONFIG_ARM_APPENDED_DTB=y

arch/arm/configs/omap2plus_defconfig

@@ -377,6 +377,7 @@ CONFIG_PWM_TWL=m
 CONFIG_PWM_TWL_LED=m
 CONFIG_OMAP_USB2=m
 CONFIG_TI_PIPE3=y
+CONFIG_TWL4030_USB=m
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set

arch/arm/configs/sama5_defconfig

@@ -3,8 +3,6 @@
 CONFIG_SYSVIPC=y
 CONFIG_IRQ_DOMAIN_DEBUG=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EMBEDDED=y
 CONFIG_SLAB=y

arch/arm/configs/sunxi_defconfig

@@ -4,6 +4,7 @@ CONFIG_BLK_DEV_INITRD=y
 CONFIG_PERF_EVENTS=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_SMP=y
+CONFIG_NR_CPUS=8
 CONFIG_AEABI=y
 CONFIG_HIGHMEM=y
 CONFIG_HIGHPTE=y

arch/arm/configs/vexpress_defconfig

@@ -118,8 +118,8 @@ CONFIG_HID_ZEROPLUS=y
 CONFIG_USB=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_MON=y
-CONFIG_USB_ISP1760_HCD=y
 CONFIG_USB_STORAGE=y
+CONFIG_USB_ISP1760=y
 CONFIG_MMC=y
 CONFIG_MMC_ARMMMCI=y
 CONFIG_NEW_LEDS=y

arch/arm/include/debug/at91.S

@@ -18,8 +18,11 @@
 #define AT91_DBGU 0xfc00c000 /* SAMA5D4_BASE_USART3 */
 #endif
 
-/* Keep in sync with mach-at91/include/mach/hardware.h */
+#ifdef CONFIG_MMU
 #define AT91_IO_P2V(x) ((x) - 0x01000000)
+#else
+#define AT91_IO_P2V(x) (x)
+#endif
 
 #define AT91_DBGU_SR		(0x14)	/* Status Register */
 #define AT91_DBGU_THR		(0x1c)	/* Transmitter Holding Register */

arch/arm/mach-at91/pm.c

@@ -270,37 +270,35 @@ static void __init at91_pm_sram_init(void)
 	phys_addr_t sram_pbase;
 	unsigned long sram_base;
 	struct device_node *node;
-	struct platform_device *pdev;
+	struct platform_device *pdev = NULL;
 
-	node = of_find_compatible_node(NULL, NULL, "mmio-sram");
+	for_each_compatible_node(node, NULL, "mmio-sram") {
-	if (!node) {
+		pdev = of_find_device_by_node(node);
-		pr_warn("%s: failed to find sram node!\n", __func__);
+		if (pdev) {
-		return;
+			of_node_put(node);
+			break;
+		}
 	}
 
-	pdev = of_find_device_by_node(node);
 	if (!pdev) {
 		pr_warn("%s: failed to find sram device!\n", __func__);
-		goto put_node;
+		return;
 	}
 
 	sram_pool = dev_get_gen_pool(&pdev->dev);
 	if (!sram_pool) {
 		pr_warn("%s: sram pool unavailable!\n", __func__);
-		goto put_node;
+		return;
 	}
 
 	sram_base = gen_pool_alloc(sram_pool, at91_slow_clock_sz);
 	if (!sram_base) {
 		pr_warn("%s: unable to alloc ocram!\n", __func__);
-		goto put_node;
+		return;
 	}
 
 	sram_pbase = gen_pool_virt_to_phys(sram_pool, sram_base);
 	slow_clock = __arm_ioremap_exec(sram_pbase, at91_slow_clock_sz, false);
-
-put_node:
-	of_node_put(node);
 }
 #endif
 

arch/arm/mach-at91/pm.h

@@ -44,7 +44,7 @@ static inline void at91rm9200_standby(void)
 		"    mcr    p15, 0, %0, c7, c0, 4\n\t"
 		"    str    %5, [%1, %2]"
 		:
-		: "r" (0), "r" (AT91_BASE_SYS), "r" (AT91RM9200_SDRAMC_LPR),
+		: "r" (0), "r" (at91_ramc_base[0]), "r" (AT91RM9200_SDRAMC_LPR),
 		  "r" (1), "r" (AT91RM9200_SDRAMC_SRR),
 		  "r" (lpr));
 }

arch/arm/mach-at91/pm_slowclock.S

@@ -25,11 +25,6 @@
  */
 #undef SLOWDOWN_MASTER_CLOCK
 
-#define MCKRDY_TIMEOUT		1000
-#define MOSCRDY_TIMEOUT 	1000
-#define PLLALOCK_TIMEOUT	1000
-#define PLLBLOCK_TIMEOUT	1000
-
 pmc	.req	r0
 sdramc	.req	r1
 ramc1	.req	r2
@@ -41,60 +36,42 @@ tmp2	.req	r5
  * Wait until master clock is ready (after switching master clock source)
  */
 	.macro wait_mckrdy
-	mov	tmp2, #MCKRDY_TIMEOUT
+1:	ldr	tmp1, [pmc, #AT91_PMC_SR]
-1:	sub	tmp2, tmp2, #1
-	cmp	tmp2, #0
-	beq	2f
-	ldr	tmp1, [pmc, #AT91_PMC_SR]
 	tst	tmp1, #AT91_PMC_MCKRDY
 	beq	1b
-2:
 	.endm
 
 /*
  * Wait until master oscillator has stabilized.
  */
 	.macro wait_moscrdy
-	mov	tmp2, #MOSCRDY_TIMEOUT
+1:	ldr	tmp1, [pmc, #AT91_PMC_SR]
-1:	sub	tmp2, tmp2, #1
-	cmp	tmp2, #0
-	beq	2f
-	ldr	tmp1, [pmc, #AT91_PMC_SR]
 	tst	tmp1, #AT91_PMC_MOSCS
 	beq	1b
-2:
 	.endm
 
 /*
  * Wait until PLLA has locked.
  */
 	.macro wait_pllalock
-	mov	tmp2, #PLLALOCK_TIMEOUT
+1:	ldr	tmp1, [pmc, #AT91_PMC_SR]
-1:	sub	tmp2, tmp2, #1
-	cmp	tmp2, #0
-	beq	2f
-	ldr	tmp1, [pmc, #AT91_PMC_SR]
 	tst	tmp1, #AT91_PMC_LOCKA
 	beq	1b
-2:
 	.endm
 
 /*
  * Wait until PLLB has locked.
  */
 	.macro wait_pllblock
-	mov	tmp2, #PLLBLOCK_TIMEOUT
+1:	ldr	tmp1, [pmc, #AT91_PMC_SR]
-1:	sub	tmp2, tmp2, #1
-	cmp	tmp2, #0
-	beq	2f
-	ldr	tmp1, [pmc, #AT91_PMC_SR]
 	tst	tmp1, #AT91_PMC_LOCKB
 	beq	1b
-2:
 	.endm
 
 	.text
 
+	.arm
+
 /* void at91_slow_clock(void __iomem *pmc, void __iomem *sdramc,
  *			void __iomem *ramc1, int memctrl)
  */
@@ -134,6 +111,16 @@ ddr_sr_enable:
 	cmp	memctrl, #AT91_MEMCTRL_DDRSDR
 	bne	sdr_sr_enable
 
+	/* LPDDR1 --> force DDR2 mode during self-refresh */
+	ldr	tmp1, [sdramc, #AT91_DDRSDRC_MDR]
+	str	tmp1, .saved_sam9_mdr
+	bic	tmp1, tmp1, #~AT91_DDRSDRC_MD
+	cmp	tmp1, #AT91_DDRSDRC_MD_LOW_POWER_DDR
+	ldreq	tmp1, [sdramc, #AT91_DDRSDRC_MDR]
+	biceq	tmp1, tmp1, #AT91_DDRSDRC_MD
+	orreq	tmp1, tmp1, #AT91_DDRSDRC_MD_DDR2
+	streq	tmp1, [sdramc, #AT91_DDRSDRC_MDR]
+
 	/* prepare for DDRAM self-refresh mode */
 	ldr	tmp1, [sdramc, #AT91_DDRSDRC_LPR]
 	str	tmp1, .saved_sam9_lpr
@@ -142,14 +129,26 @@ ddr_sr_enable:
 
 	/* figure out if we use the second ram controller */
 	cmp	ramc1, #0
-	ldrne	tmp2, [ramc1, #AT91_DDRSDRC_LPR]
+	beq	ddr_no_2nd_ctrl
-	strne	tmp2, .saved_sam9_lpr1
+
-	bicne	tmp2, #AT91_DDRSDRC_LPCB
+	ldr	tmp2, [ramc1, #AT91_DDRSDRC_MDR]
-	orrne	tmp2, #AT91_DDRSDRC_LPCB_SELF_REFRESH
+	str	tmp2, .saved_sam9_mdr1
+	bic	tmp2, tmp2, #~AT91_DDRSDRC_MD
+	cmp	tmp2, #AT91_DDRSDRC_MD_LOW_POWER_DDR
+	ldreq	tmp2, [ramc1, #AT91_DDRSDRC_MDR]
+	biceq	tmp2, tmp2, #AT91_DDRSDRC_MD
+	orreq	tmp2, tmp2, #AT91_DDRSDRC_MD_DDR2
+	streq	tmp2, [ramc1, #AT91_DDRSDRC_MDR]
+
+	ldr	tmp2, [ramc1, #AT91_DDRSDRC_LPR]
+	str	tmp2, .saved_sam9_lpr1
+	bic	tmp2, #AT91_DDRSDRC_LPCB
+	orr	tmp2, #AT91_DDRSDRC_LPCB_SELF_REFRESH
 
 	/* Enable DDRAM self-refresh mode */
+	str	tmp2, [ramc1, #AT91_DDRSDRC_LPR]
+ddr_no_2nd_ctrl:
 	str	tmp1, [sdramc, #AT91_DDRSDRC_LPR]
-	strne	tmp2, [ramc1, #AT91_DDRSDRC_LPR]
 
 	b	sdr_sr_done
 
@@ -208,6 +207,7 @@ sdr_sr_done:
 	/* Turn off the main oscillator */
 	ldr	tmp1, [pmc, #AT91_CKGR_MOR]
 	bic	tmp1, tmp1, #AT91_PMC_MOSCEN
+	orr	tmp1, tmp1, #AT91_PMC_KEY
 	str	tmp1, [pmc, #AT91_CKGR_MOR]
 
 	/* Wait for interrupt */
@@ -216,6 +216,7 @@ sdr_sr_done:
 	/* Turn on the main oscillator */
 	ldr	tmp1, [pmc, #AT91_CKGR_MOR]
 	orr	tmp1, tmp1, #AT91_PMC_MOSCEN
+	orr	tmp1, tmp1, #AT91_PMC_KEY
 	str	tmp1, [pmc, #AT91_CKGR_MOR]
 
 	wait_moscrdy
@@ -280,12 +281,17 @@ sdr_sr_done:
 	 */
 	cmp	memctrl, #AT91_MEMCTRL_DDRSDR
 	bne	sdr_en_restore
+	/* Restore MDR in case of LPDDR1 */
+	ldr	tmp1, .saved_sam9_mdr
+	str	tmp1, [sdramc, #AT91_DDRSDRC_MDR]
 	/* Restore LPR on AT91 with DDRAM */
 	ldr	tmp1, .saved_sam9_lpr
 	str	tmp1, [sdramc, #AT91_DDRSDRC_LPR]
 
 	/* if we use the second ram controller */
 	cmp	ramc1, #0
+	ldrne	tmp2, .saved_sam9_mdr1
+	strne	tmp2, [ramc1, #AT91_DDRSDRC_MDR]
 	ldrne	tmp2, .saved_sam9_lpr1
 	strne	tmp2, [ramc1, #AT91_DDRSDRC_LPR]
 
@@ -319,5 +325,11 @@ ram_restored:
 .saved_sam9_lpr1:
 	.word 0
 
+.saved_sam9_mdr:
+	.word 0
+
+.saved_sam9_mdr1:
+	.word 0
+
 ENTRY(at91_slow_clock_sz)
 	.word .-at91_slow_clock

arch/arm/mach-exynos/platsmp.c

@@ -126,8 +126,7 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
  */
 void exynos_cpu_power_down(int cpu)
 {
-	if (cpu == 0 && (of_machine_is_compatible("samsung,exynos5420") ||
+	if (cpu == 0 && (soc_is_exynos5420() || soc_is_exynos5800())) {
-		of_machine_is_compatible("samsung,exynos5800"))) {
 		/*
 		 * Bypass power down for CPU0 during suspend. Check for
 		 * the SYS_PWR_REG value to decide if we are suspending

arch/arm/mach-exynos/pm_domains.c

@@ -161,6 +161,34 @@ no_clk:
 		of_genpd_add_provider_simple(np, &pd->pd);
 	}
 
+	/* Assign the child power domains to their parents */
+	for_each_compatible_node(np, NULL, "samsung,exynos4210-pd") {
+		struct generic_pm_domain *child_domain, *parent_domain;
+		struct of_phandle_args args;
+
+		args.np = np;
+		args.args_count = 0;
+		child_domain = of_genpd_get_from_provider(&args);
+		if (!child_domain)
+			continue;
+
+		if (of_parse_phandle_with_args(np, "power-domains",
+					 "#power-domain-cells", 0, &args) != 0)
+			continue;
+
+		parent_domain = of_genpd_get_from_provider(&args);
+		if (!parent_domain)
+			continue;
+
+		if (pm_genpd_add_subdomain(parent_domain, child_domain))
+			pr_warn("%s failed to add subdomain: %s\n",
+				parent_domain->name, child_domain->name);
+		else
+			pr_info("%s has as child subdomain: %s.\n",
+				parent_domain->name, child_domain->name);
+		of_node_put(np);
+	}
+
 	return 0;
 }
 arch_initcall(exynos4_pm_init_power_domain);

arch/arm/mach-exynos/suspend.c

@@ -87,8 +87,8 @@ static unsigned int exynos_pmu_spare3;
 static u32 exynos_irqwake_intmask = 0xffffffff;
 
 static const struct exynos_wkup_irq exynos3250_wkup_irq[] = {
-	{ 73, BIT(1) }, /* RTC alarm */
+	{ 105, BIT(1) }, /* RTC alarm */
-	{ 74, BIT(2) }, /* RTC tick */
+	{ 106, BIT(2) }, /* RTC tick */
 	{ /* sentinel */ },
 };
 

arch/arm/mach-imx/mach-imx6q.c

@@ -211,8 +211,9 @@ static void __init imx6q_1588_init(void)
 	 * set bit IOMUXC_GPR1[21].  Or the PTP clock must be from pad
 	 * (external OSC), and we need to clear the bit.
 	 */
-	clksel = ptp_clk == enet_ref ? IMX6Q_GPR1_ENET_CLK_SEL_ANATOP :
+	clksel = clk_is_match(ptp_clk, enet_ref) ?
-				       IMX6Q_GPR1_ENET_CLK_SEL_PAD;
+				IMX6Q_GPR1_ENET_CLK_SEL_ANATOP :
+				IMX6Q_GPR1_ENET_CLK_SEL_PAD;
 	gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
 	if (!IS_ERR(gpr))
 		regmap_update_bits(gpr, IOMUXC_GPR1,

arch/arm/mach-omap2/omap_hwmod.c

@@ -1692,16 +1692,15 @@ static int _deassert_hardreset(struct omap_hwmod *oh, const char *name)
 	if (ret == -EBUSY)
 		pr_warn("omap_hwmod: %s: failed to hardreset\n", oh->name);
 
-	if (!ret) {
+	if (oh->clkdm) {
 		/*
 		 * Set the clockdomain to HW_AUTO, assuming that the
 		 * previous state was HW_AUTO.
 		 */
-		if (oh->clkdm && hwsup)
+		if (hwsup)
 			clkdm_allow_idle(oh->clkdm);
-	} else {
+
-		if (oh->clkdm)
+		clkdm_hwmod_disable(oh->clkdm, oh);
-			clkdm_hwmod_disable(oh->clkdm, oh);
 	}
 
 	return ret;
@@ -2698,6 +2697,7 @@ static int __init _register(struct omap_hwmod *oh)
 	INIT_LIST_HEAD(&oh->master_ports);
 	INIT_LIST_HEAD(&oh->slave_ports);
 	spin_lock_init(&oh->_lock);
+	lockdep_set_class(&oh->_lock, &oh->hwmod_key);
 
 	oh->_state = _HWMOD_STATE_REGISTERED;
 

arch/arm/mach-omap2/omap_hwmod.h

@@ -674,6 +674,7 @@ struct omap_hwmod {
 	u32				_sysc_cache;
 	void __iomem			*_mpu_rt_va;
 	spinlock_t			_lock;
+	struct lock_class_key		hwmod_key; /* unique lock class */
 	struct list_head		node;
 	struct omap_hwmod_ocp_if	*_mpu_port;
 	unsigned int			(*xlate_irq)(unsigned int);

arch/arm/mach-omap2/omap_hwmod_7xx_data.c

@@ -1466,53 +1466,16 @@ static struct omap_hwmod dra7xx_ocp2scp3_hwmod = {
  *
  */
 
-static struct omap_hwmod_class dra7xx_pcie_hwmod_class = {
+static struct omap_hwmod_class dra7xx_pciess_hwmod_class = {
 	.name	= "pcie",
 };
 
 /* pcie1 */
-static struct omap_hwmod dra7xx_pcie1_hwmod = {
+static struct omap_hwmod dra7xx_pciess1_hwmod = {
 	.name		= "pcie1",
-	.class		= &dra7xx_pcie_hwmod_class,
+	.class		= &dra7xx_pciess_hwmod_class,
 	.clkdm_name	= "pcie_clkdm",
 	.main_clk	= "l4_root_clk_div",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs	= DRA7XX_CM_PCIE_CLKSTCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* pcie2 */
-static struct omap_hwmod dra7xx_pcie2_hwmod = {
-	.name		= "pcie2",
-	.class		= &dra7xx_pcie_hwmod_class,
-	.clkdm_name	= "pcie_clkdm",
-	.main_clk	= "l4_root_clk_div",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_PCIE_CLKSTCTRL_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/*
- * 'PCIE PHY' class
- *
- */
-
-static struct omap_hwmod_class dra7xx_pcie_phy_hwmod_class = {
-	.name	= "pcie-phy",
-};
-
-/* pcie1 phy */
-static struct omap_hwmod dra7xx_pcie1_phy_hwmod = {
-	.name		= "pcie1-phy",
-	.class		= &dra7xx_pcie_phy_hwmod_class,
-	.clkdm_name	= "l3init_clkdm",
-	.main_clk	= "l4_root_clk_div",
 	.prcm = {
 		.omap4 = {
 			.clkctrl_offs = DRA7XX_CM_L3INIT_PCIESS1_CLKCTRL_OFFSET,
@@ -1522,11 +1485,11 @@ static struct omap_hwmod dra7xx_pcie1_phy_hwmod = {
 	},
 };
 
-/* pcie2 phy */
+/* pcie2 */
-static struct omap_hwmod dra7xx_pcie2_phy_hwmod = {
+static struct omap_hwmod dra7xx_pciess2_hwmod = {
-	.name		= "pcie2-phy",
+	.name		= "pcie2",
-	.class		= &dra7xx_pcie_phy_hwmod_class,
+	.class		= &dra7xx_pciess_hwmod_class,
-	.clkdm_name	= "l3init_clkdm",
+	.clkdm_name	= "pcie_clkdm",
 	.main_clk	= "l4_root_clk_div",
 	.prcm = {
 		.omap4 = {
@@ -2877,50 +2840,34 @@ static struct omap_hwmod_ocp_if dra7xx_l4_cfg__ocp2scp3 = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* l3_main_1 -> pcie1 */
+/* l3_main_1 -> pciess1 */
-static struct omap_hwmod_ocp_if dra7xx_l3_main_1__pcie1 = {
+static struct omap_hwmod_ocp_if dra7xx_l3_main_1__pciess1 = {
 	.master		= &dra7xx_l3_main_1_hwmod,
-	.slave		= &dra7xx_pcie1_hwmod,
+	.slave		= &dra7xx_pciess1_hwmod,
 	.clk		= "l3_iclk_div",
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* l4_cfg -> pcie1 */
+/* l4_cfg -> pciess1 */
-static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pcie1 = {
+static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pciess1 = {
 	.master		= &dra7xx_l4_cfg_hwmod,
-	.slave		= &dra7xx_pcie1_hwmod,
+	.slave		= &dra7xx_pciess1_hwmod,
 	.clk		= "l4_root_clk_div",
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* l3_main_1 -> pcie2 */
+/* l3_main_1 -> pciess2 */
-static struct omap_hwmod_ocp_if dra7xx_l3_main_1__pcie2 = {
+static struct omap_hwmod_ocp_if dra7xx_l3_main_1__pciess2 = {
 	.master		= &dra7xx_l3_main_1_hwmod,
-	.slave		= &dra7xx_pcie2_hwmod,
+	.slave		= &dra7xx_pciess2_hwmod,
 	.clk		= "l3_iclk_div",
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* l4_cfg -> pcie2 */
+/* l4_cfg -> pciess2 */
-static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pcie2 = {
+static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pciess2 = {
 	.master		= &dra7xx_l4_cfg_hwmod,
-	.slave		= &dra7xx_pcie2_hwmod,
+	.slave		= &dra7xx_pciess2_hwmod,
-	.clk		= "l4_root_clk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> pcie1 phy */
-static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pcie1_phy = {
-	.master		= &dra7xx_l4_cfg_hwmod,
-	.slave		= &dra7xx_pcie1_phy_hwmod,
-	.clk		= "l4_root_clk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> pcie2 phy */
-static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pcie2_phy = {
-	.master		= &dra7xx_l4_cfg_hwmod,
-	.slave		= &dra7xx_pcie2_phy_hwmod,
 	.clk		= "l4_root_clk_div",
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
@@ -3327,12 +3274,10 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
 	&dra7xx_l4_cfg__mpu,
 	&dra7xx_l4_cfg__ocp2scp1,
 	&dra7xx_l4_cfg__ocp2scp3,
-	&dra7xx_l3_main_1__pcie1,
+	&dra7xx_l3_main_1__pciess1,
-	&dra7xx_l4_cfg__pcie1,
+	&dra7xx_l4_cfg__pciess1,
-	&dra7xx_l3_main_1__pcie2,
+	&dra7xx_l3_main_1__pciess2,
-	&dra7xx_l4_cfg__pcie2,
+	&dra7xx_l4_cfg__pciess2,
-	&dra7xx_l4_cfg__pcie1_phy,
-	&dra7xx_l4_cfg__pcie2_phy,
 	&dra7xx_l3_main_1__qspi,
 	&dra7xx_l4_per3__rtcss,
 	&dra7xx_l4_cfg__sata,

arch/arm/mach-omap2/pdata-quirks.c

@@ -173,6 +173,7 @@ static void __init omap3_igep0030_rev_g_legacy_init(void)
 
 static void __init omap3_evm_legacy_init(void)
 {
+	hsmmc2_internal_input_clk();
 	legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 149);
 }
 

arch/arm/mach-omap2/prm44xx.c

@@ -252,10 +252,10 @@ static void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask)
 {
 	saved_mask[0] =
 		omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST,
-					OMAP4_PRM_IRQSTATUS_MPU_OFFSET);
+					OMAP4_PRM_IRQENABLE_MPU_OFFSET);
 	saved_mask[1] =
 		omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST,
-					OMAP4_PRM_IRQSTATUS_MPU_2_OFFSET);
+					OMAP4_PRM_IRQENABLE_MPU_2_OFFSET);
 
 	omap4_prm_write_inst_reg(0, OMAP4430_PRM_OCP_SOCKET_INST,
 				 OMAP4_PRM_IRQENABLE_MPU_OFFSET);

arch/arm/mach-pxa/idp.c

@@ -36,6 +36,7 @@
 #include <linux/platform_data/video-pxafb.h>
 #include <mach/bitfield.h>
 #include <linux/platform_data/mmc-pxamci.h>
+#include <linux/smc91x.h>
 
 #include "generic.h"
 #include "devices.h"

arch/arm/mach-pxa/lpd270.c

@@ -195,7 +195,7 @@ static struct resource smc91x_resources[] = {
 };
 
 struct smc91x_platdata smc91x_platdata = {
-	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT;
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
 };
 
 static struct platform_device smc91x_device = {

arch/arm/mach-sa1100/neponset.c

@@ -268,8 +268,8 @@ static int neponset_probe(struct platform_device *dev)
 		.id = 0,
 		.res = smc91x_resources,
 		.num_res = ARRAY_SIZE(smc91x_resources),
-		.data = &smc91c_platdata,
+		.data = &smc91x_platdata,
-		.size_data = sizeof(smc91c_platdata),
+		.size_data = sizeof(smc91x_platdata),
 	};
 	int ret, irq;
 

arch/arm/mach-sa1100/pleb.c

@@ -54,7 +54,7 @@ static struct platform_device smc91x_device = {
 	.num_resources	= ARRAY_SIZE(smc91x_resources),
 	.resource	= smc91x_resources,
 	.dev = {
-		.platform_data  = &smc91c_platdata,
+		.platform_data  = &smc91x_platdata,
 	},
 };
 

arch/arm/mach-socfpga/core.h

@@ -45,6 +45,6 @@ extern char secondary_trampoline, secondary_trampoline_end;
 
 extern unsigned long socfpga_cpu1start_addr;
 
-#define SOCFPGA_SCU_VIRT_BASE   0xfffec000
+#define SOCFPGA_SCU_VIRT_BASE   0xfee00000
 
 #endif

arch/arm/mach-socfpga/socfpga.c

@@ -23,6 +23,7 @@
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
+#include <asm/cacheflush.h>
 
 #include "core.h"
 
@@ -73,6 +74,10 @@ void __init socfpga_sysmgr_init(void)
 			(u32 *) &socfpga_cpu1start_addr))
 		pr_err("SMP: Need cpu1-start-addr in device tree.\n");
 
+	/* Ensure that socfpga_cpu1start_addr is visible to other CPUs */
+	smp_wmb();
+	sync_cache_w(&socfpga_cpu1start_addr);
+
 	sys_manager_base_addr = of_iomap(np, 0);
 
 	np = of_find_compatible_node(NULL, NULL, "altr,rst-mgr");

arch/arm/mach-sti/board-dt.c

@@ -18,6 +18,7 @@ static const char *stih41x_dt_match[] __initdata = {
 	"st,stih415",
 	"st,stih416",
 	"st,stih407",
+	"st,stih410",
 	"st,stih418",
 	NULL
 };

arch/arm64/boot/dts/apm/apm-storm.dtsi

@@ -622,7 +622,7 @@
 		};
 
 		sgenet0: ethernet@1f210000 {
-			compatible = "apm,xgene-enet";
+			compatible = "apm,xgene1-sgenet";
 			status = "disabled";
 			reg = <0x0 0x1f210000 0x0 0xd100>,
 			      <0x0 0x1f200000 0x0 0Xc300>,
@@ -636,7 +636,7 @@
 		};
 
 		xgenet: ethernet@1f610000 {
-			compatible = "apm,xgene-enet";
+			compatible = "apm,xgene1-xgenet";
 			status = "disabled";
 			reg = <0x0 0x1f610000 0x0 0xd100>,
 			      <0x0 0x1f600000 0x0 0Xc300>,

arch/arm64/include/asm/tlb.h

@@ -48,6 +48,7 @@ static inline void tlb_flush(struct mmu_gather *tlb)
 static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte,
 				  unsigned long addr)
 {
+	__flush_tlb_pgtable(tlb->mm, addr);
 	pgtable_page_dtor(pte);
 	tlb_remove_entry(tlb, pte);
 }
@@ -56,6 +57,7 @@ static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte,
 static inline void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmdp,
 				  unsigned long addr)
 {
+	__flush_tlb_pgtable(tlb->mm, addr);
 	tlb_remove_entry(tlb, virt_to_page(pmdp));
 }
 #endif
@@ -64,6 +66,7 @@ static inline void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmdp,
 static inline void __pud_free_tlb(struct mmu_gather *tlb, pud_t *pudp,
 				  unsigned long addr)
 {
+	__flush_tlb_pgtable(tlb->mm, addr);
 	tlb_remove_entry(tlb, virt_to_page(pudp));
 }
 #endif

arch/arm64/include/asm/tlbflush.h

@@ -143,6 +143,19 @@ static inline void flush_tlb_kernel_range(unsigned long start, unsigned long end
 		flush_tlb_all();
 }
 
+/*
+ * Used to invalidate the TLB (walk caches) corresponding to intermediate page
+ * table levels (pgd/pud/pmd).
+ */
+static inline void __flush_tlb_pgtable(struct mm_struct *mm,
+				       unsigned long uaddr)
+{
+	unsigned long addr = uaddr >> 12 | ((unsigned long)ASID(mm) << 48);
+
+	dsb(ishst);
+	asm("tlbi	vae1is, %0" : : "r" (addr));
+	dsb(ish);
+}
 /*
  * On AArch64, the cache coherency is handled via the set_pte_at() function.
  */

arch/arm64/kernel/efi.c

@@ -354,3 +354,12 @@ void efi_virtmap_unload(void)
 	efi_set_pgd(current->active_mm);
 	preempt_enable();
 }
+
+/*
+ * UpdateCapsule() depends on the system being shutdown via
+ * ResetSystem().
+ */
+bool efi_poweroff_required(void)
+{
+	return efi_enabled(EFI_RUNTIME_SERVICES);
+}

arch/arm64/kernel/head.S

@@ -585,8 +585,8 @@ ENDPROC(set_cpu_boot_mode_flag)
  * zeroing of .bss would clobber it.
  */
 	.pushsection	.data..cacheline_aligned
-ENTRY(__boot_cpu_mode)
 	.align	L1_CACHE_SHIFT
+ENTRY(__boot_cpu_mode)
 	.long	BOOT_CPU_MODE_EL2
 	.long	0
 	.popsection

arch/arm64/kernel/process.c

@@ -21,6 +21,7 @@
 #include <stdarg.h>
 
 #include <linux/compat.h>
+#include <linux/efi.h>
 #include <linux/export.h>
 #include <linux/sched.h>
 #include <linux/kernel.h>
@@ -150,6 +151,13 @@ void machine_restart(char *cmd)
 	local_irq_disable();
 	smp_send_stop();
 
+	/*
+	 * UpdateCapsule() depends on the system being reset via
+	 * ResetSystem().
+	 */
+	if (efi_enabled(EFI_RUNTIME_SERVICES))
+		efi_reboot(reboot_mode, NULL);
+
 	/* Now call the architecture specific reboot code. */
 	if (arm_pm_restart)
 		arm_pm_restart(reboot_mode, cmd);

arch/c6x/include/asm/pgtable.h

@@ -67,6 +67,11 @@ extern unsigned long empty_zero_page;
  */
 #define pgtable_cache_init()   do { } while (0)
 
+/*
+ * c6x is !MMU, so define the simpliest implementation
+ */
+#define pgprot_writecombine pgprot_noncached
+
 #include <asm-generic/pgtable.h>
 
 #endif /* _ASM_C6X_PGTABLE_H */

arch/microblaze/kernel/entry.S

@@ -348,8 +348,9 @@ C_ENTRY(_user_exception):
  * The LP register should point to the location where the called function
  * should return.  [note that MAKE_SYS_CALL uses label 1] */
 	/* See if the system call number is valid */
+	blti	r12, 5f
 	addi	r11, r12, -__NR_syscalls;
-	bgei	r11,5f;
+	bgei	r11, 5f;
 	/* Figure out which function to use for this system call.  */
 	/* Note Microblaze barrel shift is optional, so don't rely on it */
 	add	r12, r12, r12;			/* convert num -> ptr */
@@ -375,7 +376,7 @@ C_ENTRY(_user_exception):
 
 	/* The syscall number is invalid, return an error.  */
 5:
-	rtsd	r15, 8;		/* looks like a normal subroutine return */
+	braid	ret_from_trap
 	addi	r3, r0, -ENOSYS;
 
 /* Entry point used to return from a syscall/trap */
@@ -411,7 +412,7 @@ C_ENTRY(ret_from_trap):
 	bri	1b
 
 	/* Maybe handle a signal */
-5:	
+5:
 	andi	r11, r19, _TIF_SIGPENDING | _TIF_NOTIFY_RESUME;
 	beqi	r11, 4f;		/* Signals to handle, handle them */
 

arch/nios2/include/asm/ptrace.h

@@ -15,7 +15,54 @@
 
 #include <uapi/asm/ptrace.h>
 
+/* This struct defines the way the registers are stored on the
+   stack during a system call.  */
+
 #ifndef __ASSEMBLY__
+struct pt_regs {
+	unsigned long  r8;	/* r8-r15 Caller-saved GP registers */
+	unsigned long  r9;
+	unsigned long  r10;
+	unsigned long  r11;
+	unsigned long  r12;
+	unsigned long  r13;
+	unsigned long  r14;
+	unsigned long  r15;
+	unsigned long  r1;	/* Assembler temporary */
+	unsigned long  r2;	/* Retval LS 32bits */
+	unsigned long  r3;	/* Retval MS 32bits */
+	unsigned long  r4;	/* r4-r7 Register arguments */
+	unsigned long  r5;
+	unsigned long  r6;
+	unsigned long  r7;
+	unsigned long  orig_r2;	/* Copy of r2 ?? */
+	unsigned long  ra;	/* Return address */
+	unsigned long  fp;	/* Frame pointer */
+	unsigned long  sp;	/* Stack pointer */
+	unsigned long  gp;	/* Global pointer */
+	unsigned long  estatus;
+	unsigned long  ea;	/* Exception return address (pc) */
+	unsigned long  orig_r7;
+};
+
+/*
+ * This is the extended stack used by signal handlers and the context
+ * switcher: it's pushed after the normal "struct pt_regs".
+ */
+struct switch_stack {
+	unsigned long  r16;	/* r16-r23 Callee-saved GP registers */
+	unsigned long  r17;
+	unsigned long  r18;
+	unsigned long  r19;
+	unsigned long  r20;
+	unsigned long  r21;
+	unsigned long  r22;
+	unsigned long  r23;
+	unsigned long  fp;
+	unsigned long  gp;
+	unsigned long  ra;
+};
+
 #define user_mode(regs)	(((regs)->estatus & ESTATUS_EU))
 
 #define instruction_pointer(regs)	((regs)->ra)

arch/nios2/include/asm/ucontext.h

@@ -1,32 +0,0 @@
-/*
- * Copyright (C) 2010 Tobias Klauser <tklauser@distanz.ch>
- * Copyright (C) 2004 Microtronix Datacom Ltd
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_NIOS2_UCONTEXT_H
-#define _ASM_NIOS2_UCONTEXT_H
-
-typedef int greg_t;
-#define NGREG 32
-typedef greg_t gregset_t[NGREG];
-
-struct mcontext {
-	int version;
-	gregset_t gregs;
-};
-
-#define MCONTEXT_VERSION 2
-
-struct ucontext {
-	unsigned long	  uc_flags;
-	struct ucontext  *uc_link;
-	stack_t		  uc_stack;
-	struct mcontext	  uc_mcontext;
-	sigset_t	  uc_sigmask;	/* mask last for extensibility */
-};
-
-#endif

arch/nios2/include/uapi/asm/Kbuild

@@ -2,3 +2,5 @@ include include/uapi/asm-generic/Kbuild.asm
 
 header-y += elf.h
 header-y += ucontext.h
+
+generic-y += ucontext.h

arch/nios2/include/uapi/asm/elf.h

@@ -50,9 +50,7 @@
 
 typedef unsigned long elf_greg_t;
 
-#define ELF_NGREG	\
+#define ELF_NGREG		49
-	((sizeof(struct pt_regs) + sizeof(struct switch_stack)) /	\
-		sizeof(elf_greg_t))
 typedef elf_greg_t elf_gregset_t[ELF_NGREG];
 
 typedef unsigned long elf_fpregset_t;

arch/nios2/include/uapi/asm/ptrace.h

@@ -67,53 +67,9 @@
 
 #define NUM_PTRACE_REG (PTR_TLBMISC + 1)
 
-/* this struct defines the way the registers are stored on the
+/* User structures for general purpose registers.  */
-   stack during a system call.
+struct user_pt_regs {
-
+	__u32		regs[49];
-   There is a fake_regs in setup.c that has to match pt_regs.*/
-
-struct pt_regs {
-	unsigned long  r8;		/* r8-r15 Caller-saved GP registers */
-	unsigned long  r9;
-	unsigned long  r10;
-	unsigned long  r11;
-	unsigned long  r12;
-	unsigned long  r13;
-	unsigned long  r14;
-	unsigned long  r15;
-	unsigned long  r1;		/* Assembler temporary */
-	unsigned long  r2;		/* Retval LS 32bits */
-	unsigned long  r3;		/* Retval MS 32bits */
-	unsigned long  r4;		/* r4-r7 Register arguments */
-	unsigned long  r5;
-	unsigned long  r6;
-	unsigned long  r7;
-	unsigned long  orig_r2;		/* Copy of r2 ?? */
-	unsigned long  ra;		/* Return address */
-	unsigned long  fp;		/* Frame pointer */
-	unsigned long  sp;		/* Stack pointer */
-	unsigned long  gp;		/* Global pointer */
-	unsigned long  estatus;
-	unsigned long  ea;		/* Exception return address (pc) */
-	unsigned long  orig_r7;
-};
-
-/*
- * This is the extended stack used by signal handlers and the context
- * switcher: it's pushed after the normal "struct pt_regs".
- */
-struct switch_stack {
-	unsigned long  r16;		/* r16-r23 Callee-saved GP registers */
-	unsigned long  r17;
-	unsigned long  r18;
-	unsigned long  r19;
-	unsigned long  r20;
-	unsigned long  r21;
-	unsigned long  r22;
-	unsigned long  r23;
-	unsigned long  fp;
-	unsigned long  gp;
-	unsigned long  ra;
 };
 
 #endif /* __ASSEMBLY__ */

arch/nios2/include/uapi/asm/sigcontext.h

@@ -15,14 +15,16 @@
  * details.
  */
 
-#ifndef _ASM_NIOS2_SIGCONTEXT_H
+#ifndef _UAPI__ASM_SIGCONTEXT_H
-#define _ASM_NIOS2_SIGCONTEXT_H
+#define _UAPI__ASM_SIGCONTEXT_H
 
-#include <asm/ptrace.h>
+#include <linux/types.h>
+
+#define MCONTEXT_VERSION 2
 
 struct sigcontext {
-	struct pt_regs regs;
+	int version;
-	unsigned long  sc_mask;	/* old sigmask */
+	unsigned long gregs[32];
 };
 
 #endif

arch/nios2/kernel/signal.c

@@ -39,7 +39,7 @@ static inline int rt_restore_ucontext(struct pt_regs *regs,
 					struct ucontext *uc, int *pr2)
 {
 	int temp;
-	greg_t *gregs = uc->uc_mcontext.gregs;
+	unsigned long *gregs = uc->uc_mcontext.gregs;
 	int err;
 
 	/* Always make any pending restarted system calls return -EINTR */
@@ -127,7 +127,7 @@ badframe:
 static inline int rt_setup_ucontext(struct ucontext *uc, struct pt_regs *regs)
 {
 	struct switch_stack *sw = (struct switch_stack *)regs - 1;
-	greg_t *gregs = uc->uc_mcontext.gregs;
+	unsigned long *gregs = uc->uc_mcontext.gregs;
 	int err = 0;
 
 	err |= __put_user(MCONTEXT_VERSION, &uc->uc_mcontext.version);

arch/s390/include/asm/kvm_host.h

@@ -515,15 +515,15 @@ struct s390_io_adapter {
 #define S390_ARCH_FAC_MASK_SIZE_U64 \
 	(S390_ARCH_FAC_MASK_SIZE_BYTE / sizeof(u64))
 
-struct s390_model_fac {
+struct kvm_s390_fac {
-	/* facilities used in SIE context */
+	/* facility list requested by guest */
-	__u64 sie[S390_ARCH_FAC_LIST_SIZE_U64];
+	__u64 list[S390_ARCH_FAC_LIST_SIZE_U64];
-	/* subset enabled by kvm */
+	/* facility mask supported by kvm & hosting machine */
-	__u64 kvm[S390_ARCH_FAC_LIST_SIZE_U64];
+	__u64 mask[S390_ARCH_FAC_LIST_SIZE_U64];
 };
 
 struct kvm_s390_cpu_model {
-	struct s390_model_fac *fac;
+	struct kvm_s390_fac *fac;
 	struct cpuid cpu_id;
 	unsigned short ibc;
 };

arch/s390/include/asm/mmu_context.h

@@ -62,6 +62,7 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
 {
 	int cpu = smp_processor_id();
 
+	S390_lowcore.user_asce = next->context.asce_bits | __pa(next->pgd);
 	if (prev == next)
 		return;
 	if (MACHINE_HAS_TLB_LC)
@@ -73,7 +74,6 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
 	atomic_dec(&prev->context.attach_count);
 	if (MACHINE_HAS_TLB_LC)
 		cpumask_clear_cpu(cpu, &prev->context.cpu_attach_mask);
-	S390_lowcore.user_asce = next->context.asce_bits | __pa(next->pgd);
 }
 
 #define finish_arch_post_lock_switch finish_arch_post_lock_switch

arch/s390/include/asm/page.h

@@ -37,16 +37,7 @@ static inline void storage_key_init_range(unsigned long start, unsigned long end
 #endif
 }
 
-static inline void clear_page(void *page)
+#define clear_page(page)	memset((page), 0, PAGE_SIZE)
-{
-	register unsigned long reg1 asm ("1") = 0;
-	register void *reg2 asm ("2") = page;
-	register unsigned long reg3 asm ("3") = 4096;
-	asm volatile(
-		"	mvcl	2,0"
-		: "+d" (reg2), "+d" (reg3) : "d" (reg1)
-		: "memory", "cc");
-}
 
 /*
  * copy_page uses the mvcl instruction with 0xb0 padding byte in order to

arch/s390/kernel/jump_label.c

@@ -36,16 +36,20 @@ static void jump_label_make_branch(struct jump_entry *entry, struct insn *insn)
 	insn->offset = (entry->target - entry->code) >> 1;
 }
 
-static void jump_label_bug(struct jump_entry *entry, struct insn *insn)
+static void jump_label_bug(struct jump_entry *entry, struct insn *expected,
+			   struct insn *new)
 {
 	unsigned char *ipc = (unsigned char *)entry->code;
-	unsigned char *ipe = (unsigned char *)insn;
+	unsigned char *ipe = (unsigned char *)expected;
+	unsigned char *ipn = (unsigned char *)new;
 
 	pr_emerg("Jump label code mismatch at %pS [%p]\n", ipc, ipc);
 	pr_emerg("Found:    %02x %02x %02x %02x %02x %02x\n",
 		 ipc[0], ipc[1], ipc[2], ipc[3], ipc[4], ipc[5]);
 	pr_emerg("Expected: %02x %02x %02x %02x %02x %02x\n",
 		 ipe[0], ipe[1], ipe[2], ipe[3], ipe[4], ipe[5]);
+	pr_emerg("New:      %02x %02x %02x %02x %02x %02x\n",
+		 ipn[0], ipn[1], ipn[2], ipn[3], ipn[4], ipn[5]);
 	panic("Corrupted kernel text");
 }
 
@@ -69,10 +73,10 @@ static void __jump_label_transform(struct jump_entry *entry,
 	}
 	if (init) {
 		if (memcmp((void *)entry->code, &orignop, sizeof(orignop)))
-			jump_label_bug(entry, &old);
+			jump_label_bug(entry, &orignop, &new);
 	} else {
 		if (memcmp((void *)entry->code, &old, sizeof(old)))
-			jump_label_bug(entry, &old);
+			jump_label_bug(entry, &old, &new);
 	}
 	probe_kernel_write((void *)entry->code, &new, sizeof(new));
 }

arch/s390/kernel/module.c

@@ -436,6 +436,7 @@ int module_finalize(const Elf_Ehdr *hdr,
 		    const Elf_Shdr *sechdrs,
 		    struct module *me)
 {
+	jump_label_apply_nops(me);
 	vfree(me->arch.syminfo);
 	me->arch.syminfo = NULL;
 	return 0;

arch/s390/kernel/processor.c

@@ -18,7 +18,7 @@
 
 static DEFINE_PER_CPU(struct cpuid, cpu_id);
 
-void cpu_relax(void)
+void notrace cpu_relax(void)
 {
 	if (!smp_cpu_mtid && MACHINE_HAS_DIAG44)
 		asm volatile("diag 0,0,0x44");