ixbge: Make ethtool code account for media types

The i82598 can support various media types but this ethtool
code only was coded for fiber just yet.

Signed-off-by: Ayyappan Veeraiyan <ayyappan.veeraiyan@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
This commit is contained in:
Ayyappan Veeraiyan 2008-02-01 15:58:54 -08:00 committed by Jeff Garzik
parent e092be60b2
commit 735441fb1a

View File

@ -103,21 +103,41 @@ static int ixgbe_get_settings(struct net_device *netdev,
struct ethtool_cmd *ecmd)
{
struct ixgbe_adapter *adapter = netdev_priv(netdev);
struct ixgbe_hw *hw = &adapter->hw;
u32 link_speed = 0;
bool link_up;
ecmd->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE);
ecmd->advertising = (ADVERTISED_10000baseT_Full | ADVERTISED_FIBRE);
ecmd->port = PORT_FIBRE;
ecmd->supported = SUPPORTED_10000baseT_Full;
ecmd->autoneg = AUTONEG_ENABLE;
ecmd->transceiver = XCVR_EXTERNAL;
if (hw->phy.media_type == ixgbe_media_type_copper) {
ecmd->supported |= (SUPPORTED_1000baseT_Full |
SUPPORTED_TP | SUPPORTED_Autoneg);
if (netif_carrier_ok(adapter->netdev)) {
ecmd->speed = SPEED_10000;
ecmd->advertising = (ADVERTISED_TP | ADVERTISED_Autoneg);
if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL)
ecmd->advertising |= ADVERTISED_10000baseT_Full;
if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL)
ecmd->advertising |= ADVERTISED_1000baseT_Full;
ecmd->port = PORT_TP;
} else {
ecmd->supported |= SUPPORTED_FIBRE;
ecmd->advertising = (ADVERTISED_10000baseT_Full |
ADVERTISED_FIBRE);
ecmd->port = PORT_FIBRE;
}
adapter->hw.mac.ops.check_link(hw, &(link_speed), &link_up);
if (link_up) {
ecmd->speed = (link_speed == IXGBE_LINK_SPEED_10GB_FULL) ?
SPEED_10000 : SPEED_1000;
ecmd->duplex = DUPLEX_FULL;
} else {
ecmd->speed = -1;
ecmd->duplex = -1;
}
ecmd->autoneg = AUTONEG_DISABLE;
return 0;
}
@ -125,17 +145,17 @@ static int ixgbe_set_settings(struct net_device *netdev,
struct ethtool_cmd *ecmd)
{
struct ixgbe_adapter *adapter = netdev_priv(netdev);
struct ixgbe_hw *hw = &adapter->hw;
if (ecmd->autoneg == AUTONEG_ENABLE ||
ecmd->speed + ecmd->duplex != SPEED_10000 + DUPLEX_FULL)
return -EINVAL;
if (netif_running(adapter->netdev)) {
ixgbe_down(adapter);
ixgbe_reset(adapter);
ixgbe_up(adapter);
} else {
ixgbe_reset(adapter);
switch (hw->phy.media_type) {
case ixgbe_media_type_fiber:
if ((ecmd->autoneg == AUTONEG_ENABLE) ||
(ecmd->speed + ecmd->duplex != SPEED_10000 + DUPLEX_FULL))
return -EINVAL;
/* in this case we currently only support 10Gb/FULL */
break;
default:
break;
}
return 0;