leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity

staging: dwc2: reorder some kernel doc comments and struct members

Browse Source 
Reorder the kernel doc comments for 'struct dwc2_core_params' to
match the ordering in the struct itself. Reorder the members of
'struct dwc2_qh' (and its kerneldoc comments) to minimize the
amount of structure padding.

Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Paul Zimmerman 2013-08-11 12:50:17 -07:00 committed by Greg Kroah-Hartman
parent 89911e583a
commit 725acc861b
2 changed files with 28 additions and 28 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

34
drivers/staging/dwc2/core.h
View File

@ -74,6 +74,9 @@ enum dwc2_lx_state {
* 0 - HNP and SRP capable (default)
* 1 - SRP Only capable
* 2 - No HNP/SRP capable
* @otg_ver: OTG version supported
* 0 - 1.3
* 1 - 2.0
* @dma_enable: Specifies whether to use slave or DMA mode for accessing
* the data FIFOs. The driver will automatically detect the
* value for this parameter if none is specified.
@ -90,20 +93,10 @@ enum dwc2_lx_state {
* the attached device and the value of phy_type.
* 0 - High Speed (default)
* 1 - Full Speed
* @host_support_fs_ls_low_power: Specifies whether low power mode is supported
* when attached to a Full Speed or Low Speed device in
* host mode.
* 0 - Don't support low power mode (default)
* 1 - Support low power mode
* @host_ls_low_power_phy_clk: Specifies the PHY clock rate in low power mode
* when connected to a Low Speed device in host mode. This
* parameter is applicable only if
* host_support_fs_ls_low_power is enabled. If phy_type is
* set to FS then defaults to 6 MHZ otherwise 48 MHZ.
* 0 - 48 MHz
* 1 - 6 MHz
* @enable_dynamic_fifo: 0 - Use coreConsultant-specified FIFO size parameters
* 1 - Allow dynamic FIFO sizing (default)
* @en_multiple_tx_fifo: Specifies whether dedicated per-endpoint transmit FIFOs
* are enabled
* @host_rx_fifo_size: Number of 4-byte words in the Rx FIFO in host mode when
* dynamic FIFO sizing is enabled
* 16 to 32768 (default 1024)
@ -145,9 +138,19 @@ enum dwc2_lx_state {
* 0 - No (default)
* 1 - Yes
* @ulpi_fs_ls: True to make ULPI phy operate in FS/LS mode only
* @host_support_fs_ls_low_power: Specifies whether low power mode is supported
* when attached to a Full Speed or Low Speed device in
* host mode.
* 0 - Don't support low power mode (default)
* 1 - Support low power mode
* @host_ls_low_power_phy_clk: Specifies the PHY clock rate in low power mode
* when connected to a Low Speed device in host mode. This
* parameter is applicable only if
* host_support_fs_ls_low_power is enabled. If phy_type is
* set to FS then defaults to 6 MHZ otherwise 48 MHZ.
* 0 - 48 MHz
* 1 - 6 MHz
* @ts_dline: True to enable Term Select Dline pulsing
* @en_multiple_tx_fifo: Specifies whether dedicated per-endpoint transmit FIFOs
* are enabled
* @reload_ctl: True to allow dynamic reloading of HFIR register during
* runtime
* @ahbcfg: This field allows the default value of the GAHBCFG
@ -155,9 +158,6 @@ enum dwc2_lx_state {
* -1 - GAHBCFG value will not be overridden
* all others - GAHBCFG value will be overridden with
* this value
* @otg_ver: OTG version supported
* 0 - 1.3
* 1 - 2.0
*
* The following parameters may be specified when starting the module. These
* parameters define how the DWC_otg controller should be configured.

22
drivers/staging/dwc2/hcd.h
View File

@ -232,16 +232,19 @@ enum dwc2_transaction_type {
* - DWC2_HC_PID_DATA1
* @ping_state: Ping state
* @do_split: Full/low speed endpoint on high-speed hub requires split
* @qtd_list: List of QTDs for this QH
* @channel: Host channel currently processing transfers for this QH
* @td_first: Index of first activated isochronous transfer descriptor
* @td_last: Index of last activated isochronous transfer descriptor
* @usecs: Bandwidth in microseconds per (micro)frame
* @interval: Interval between transfers in (micro)frames
* @sched_frame: (micro)frame to initialize a periodic transfer.
* @sched_frame: (Micro)frame to initialize a periodic transfer.
* The transfer executes in the following (micro)frame.
* @start_split_frame: (Micro)frame at which last start split was initialized
* @ntd: Actual number of transfer descriptors in a list
* @dw_align_buf: Used instead of original buffer if its physical address
* is not dword-aligned
* @dw_align_buf_dma: DMA address for align_buf
* @qtd_list: List of QTDs for this QH
* @channel: Host channel currently processing transfers for this QH
* @qh_list_entry: Entry for QH in either the periodic or non-periodic
* schedule
* @desc_list: List of transfer descriptors
@ -249,9 +252,6 @@ enum dwc2_transaction_type {
* @n_bytes: Xfer Bytes array. Each element corresponds to a transfer
* descriptor and indicates original XferSize value for the
* descriptor
* @ntd: Actual number of transfer descriptors in a list
* @td_first: Index of first activated isochronous transfer descriptor
* @td_last: Index of last activated isochronous transfer descriptor
* @tt_buffer_dirty True if clear_tt_buffer_complete is pending
*
* A Queue Head (QH) holds the static characteristics of an endpoint and
@ -266,21 +266,21 @@ struct dwc2_qh {
u8 data_toggle;
u8 ping_state;
u8 do_split;
struct list_head qtd_list;
struct dwc2_host_chan *channel;
u8 td_first;
u8 td_last;
u16 usecs;
u16 interval;
u16 sched_frame;
u16 start_split_frame;
u16 ntd;
u8 *dw_align_buf;
dma_addr_t dw_align_buf_dma;
struct list_head qtd_list;
struct dwc2_host_chan *channel;
struct list_head qh_list_entry;
struct dwc2_hcd_dma_desc *desc_list;
dma_addr_t desc_list_dma;
u32 *n_bytes;
u16 ntd;
u8 td_first;
u8 td_last;
unsigned tt_buffer_dirty:1;
};