Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

S390 bpf_jit.S is removed in net-next and had changes in 'net',
since that code isn't used any more take the removal.

TLS data structures split the TX and RX components in 'net-next',
put the new struct members from the bug fix in 'net' into the RX
part.

The 'net-next' tree had some reworking of how the ERSPAN code works in
the GRE tunneling code, overlapping with a one-line headroom
calculation fix in 'net'.

Overlapping changes in __sock_map_ctx_update_elem(), keep the bits
that read the prog members via READ_ONCE() into local variables
before using them.

Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
David S. Miller 2018-05-21 16:01:54 -04:00
commit 6f6e434aa2
340 changed files with 4358 additions and 1855 deletions

View File

@ -244,3 +244,11 @@ Description: read only
Returns 1 if the psl timebase register is synchronized
with the core timebase register, 0 otherwise.
Users: https://github.com/ibm-capi/libcxl
What: /sys/class/cxl/<card>/tunneled_ops_supported
Date: May 2018
Contact: linuxppc-dev@lists.ozlabs.org
Description: read only
Returns 1 if tunneled operations are supported in capi mode,
0 otherwise.
Users: https://github.com/ibm-capi/libcxl

View File

@ -21,9 +21,10 @@ Required properties:
- main controller clock (for both armada-375-pp2 and armada-7k-pp2)
- GOP clock (for both armada-375-pp2 and armada-7k-pp2)
- MG clock (only for armada-7k-pp2)
- MG Core clock (only for armada-7k-pp2)
- AXI clock (only for armada-7k-pp2)
- clock-names: names of used clocks, must be "pp_clk", "gop_clk", "mg_clk"
and "axi_clk" (the 2 latter only for armada-7k-pp2).
- clock-names: names of used clocks, must be "pp_clk", "gop_clk", "mg_clk",
"mg_core_clk" and "axi_clk" (the 3 latter only for armada-7k-pp2).
The ethernet ports are represented by subnodes. At least one port is
required.
@ -80,8 +81,8 @@ cpm_ethernet: ethernet@0 {
compatible = "marvell,armada-7k-pp22";
reg = <0x0 0x100000>, <0x129000 0xb000>;
clocks = <&cpm_syscon0 1 3>, <&cpm_syscon0 1 9>,
<&cpm_syscon0 1 5>, <&cpm_syscon0 1 18>;
clock-names = "pp_clk", "gop_clk", "gp_clk", "axi_clk";
<&cpm_syscon0 1 5>, <&cpm_syscon0 1 6>, <&cpm_syscon0 1 18>;
clock-names = "pp_clk", "gop_clk", "mg_clk", "mg_core_clk", "axi_clk";
eth0: eth0 {
interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>,

View File

@ -57,6 +57,13 @@ KSZ9031:
- txd2-skew-ps : Skew control of TX data 2 pad
- txd3-skew-ps : Skew control of TX data 3 pad
- micrel,force-master:
Boolean, force phy to master mode. Only set this option if the phy
reference clock provided at CLK125_NDO pin is used as MAC reference
clock because the clock jitter in slave mode is to high (errata#2).
Attention: The link partner must be configurable as slave otherwise
no link will be established.
Examples:
mdio {

View File

@ -72,8 +72,8 @@ KVM_FEATURE_CLOCKSOURCE_STABLE_BIT || 24 || host will warn if no guest-side
flag || value || meaning
==================================================================================
KVM_HINTS_DEDICATED || 0 || guest checks this feature bit to
|| || determine if there is vCPU pinning
|| || and there is no vCPU over-commitment,
KVM_HINTS_REALTIME || 0 || guest checks this feature bit to
|| || determine that vCPUs are never
|| || preempted for an unlimited time,
|| || allowing optimizations
----------------------------------------------------------------------------------

View File

@ -3690,7 +3690,6 @@ F: drivers/cpufreq/arm_big_little_dt.c
CPU POWER MONITORING SUBSYSTEM
M: Thomas Renninger <trenn@suse.com>
M: Shuah Khan <shuahkh@osg.samsung.com>
M: Shuah Khan <shuah@kernel.org>
L: linux-pm@vger.kernel.org
S: Maintained
@ -4309,7 +4308,7 @@ F: Documentation/driver-api/dma-buf.rst
T: git git://anongit.freedesktop.org/drm/drm-misc
DMA GENERIC OFFLOAD ENGINE SUBSYSTEM
M: Vinod Koul <vinod.koul@intel.com>
M: Vinod Koul <vkoul@kernel.org>
L: dmaengine@vger.kernel.org
Q: https://patchwork.kernel.org/project/linux-dmaengine/list/
S: Maintained
@ -7694,10 +7693,10 @@ F: include/linux/sunrpc/
F: include/uapi/linux/sunrpc/
KERNEL SELFTEST FRAMEWORK
M: Shuah Khan <shuahkh@osg.samsung.com>
M: Shuah Khan <shuah@kernel.org>
L: linux-kselftest@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git
Q: https://patchwork.kernel.org/project/linux-kselftest/list/
S: Maintained
F: tools/testing/selftests/
F: Documentation/dev-tools/kselftest*
@ -12218,7 +12217,7 @@ F: Documentation/s390/vfio-ccw.txt
F: include/uapi/linux/vfio_ccw.h
S390 ZCRYPT DRIVER
M: Harald Freudenberger <freude@de.ibm.com>
M: Harald Freudenberger <freude@linux.ibm.com>
L: linux-s390@vger.kernel.org
W: http://www.ibm.com/developerworks/linux/linux390/
S: Supported
@ -13262,6 +13261,12 @@ M: Jan-Benedict Glaw <jbglaw@lug-owl.de>
S: Maintained
F: arch/alpha/kernel/srm_env.c
ST STM32 I2C/SMBUS DRIVER
M: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
L: linux-i2c@vger.kernel.org
S: Maintained
F: drivers/i2c/busses/i2c-stm32*
STABLE BRANCH
M: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
L: stable@vger.kernel.org
@ -14649,7 +14654,6 @@ F: drivers/usb/common/usb-otg-fsm.c
USB OVER IP DRIVER
M: Valentina Manea <valentina.manea.m@gmail.com>
M: Shuah Khan <shuahkh@osg.samsung.com>
M: Shuah Khan <shuah@kernel.org>
L: linux-usb@vger.kernel.org
S: Maintained

View File

@ -2,7 +2,7 @@
VERSION = 4
PATCHLEVEL = 17
SUBLEVEL = 0
EXTRAVERSION = -rc4
EXTRAVERSION = -rc6
NAME = Merciless Moray
# *DOCUMENTATION*

View File

@ -464,6 +464,10 @@ config GCC_PLUGIN_LATENT_ENTROPY
config GCC_PLUGIN_STRUCTLEAK
bool "Force initialization of variables containing userspace addresses"
depends on GCC_PLUGINS
# Currently STRUCTLEAK inserts initialization out of live scope of
# variables from KASAN point of view. This leads to KASAN false
# positive reports. Prohibit this combination for now.
depends on !KASAN_EXTRA
help
This plugin zero-initializes any structures containing a
__user attribute. This can prevent some classes of information

View File

@ -117,11 +117,9 @@ ccflags-y := -fpic -mno-single-pic-base -fno-builtin -I$(obj)
asflags-y := -DZIMAGE
# Supply kernel BSS size to the decompressor via a linker symbol.
KBSS_SZ = $(shell $(CROSS_COMPILE)nm $(obj)/../../../../vmlinux | \
perl -e 'while (<>) { \
$$bss_start=hex($$1) if /^([[:xdigit:]]+) B __bss_start$$/; \
$$bss_end=hex($$1) if /^([[:xdigit:]]+) B __bss_stop$$/; \
}; printf "%d\n", $$bss_end - $$bss_start;')
KBSS_SZ = $(shell echo $$(($$($(CROSS_COMPILE)nm $(obj)/../../../../vmlinux | \
sed -n -e 's/^\([^ ]*\) [AB] __bss_start$$/-0x\1/p' \
-e 's/^\([^ ]*\) [AB] __bss_stop$$/+0x\1/p') )) )
LDFLAGS_vmlinux = --defsym _kernel_bss_size=$(KBSS_SZ)
# Supply ZRELADDR to the decompressor via a linker symbol.
ifneq ($(CONFIG_AUTO_ZRELADDR),y)

View File

@ -29,19 +29,19 @@
#if defined(CONFIG_DEBUG_ICEDCC)
#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) || defined(CONFIG_CPU_V7)
.macro loadsp, rb, tmp
.macro loadsp, rb, tmp1, tmp2
.endm
.macro writeb, ch, rb
mcr p14, 0, \ch, c0, c5, 0
.endm
#elif defined(CONFIG_CPU_XSCALE)
.macro loadsp, rb, tmp
.macro loadsp, rb, tmp1, tmp2
.endm
.macro writeb, ch, rb
mcr p14, 0, \ch, c8, c0, 0
.endm
#else
.macro loadsp, rb, tmp
.macro loadsp, rb, tmp1, tmp2
.endm
.macro writeb, ch, rb
mcr p14, 0, \ch, c1, c0, 0
@ -57,7 +57,7 @@
.endm
#if defined(CONFIG_ARCH_SA1100)
.macro loadsp, rb, tmp
.macro loadsp, rb, tmp1, tmp2
mov \rb, #0x80000000 @ physical base address
#ifdef CONFIG_DEBUG_LL_SER3
add \rb, \rb, #0x00050000 @ Ser3
@ -66,8 +66,8 @@
#endif
.endm
#else
.macro loadsp, rb, tmp
addruart \rb, \tmp
.macro loadsp, rb, tmp1, tmp2
addruart \rb, \tmp1, \tmp2
.endm
#endif
#endif
@ -561,8 +561,6 @@ not_relocated: mov r0, #0
bl decompress_kernel
bl cache_clean_flush
bl cache_off
mov r1, r7 @ restore architecture number
mov r2, r8 @ restore atags pointer
#ifdef CONFIG_ARM_VIRT_EXT
mrs r0, spsr @ Get saved CPU boot mode
@ -1297,7 +1295,7 @@ phex: adr r3, phexbuf
b 1b
@ puts corrupts {r0, r1, r2, r3}
puts: loadsp r3, r1
puts: loadsp r3, r2, r1
1: ldrb r2, [r0], #1
teq r2, #0
moveq pc, lr
@ -1314,8 +1312,8 @@ puts: loadsp r3, r1
@ putc corrupts {r0, r1, r2, r3}
putc:
mov r2, r0
loadsp r3, r1, r0
mov r0, #0
loadsp r3, r1
b 2b
@ memdump corrupts {r0, r1, r2, r3, r10, r11, r12, lr}
@ -1365,6 +1363,8 @@ __hyp_reentry_vectors:
__enter_kernel:
mov r0, #0 @ must be 0
mov r1, r7 @ restore architecture number
mov r2, r8 @ restore atags pointer
ARM( mov pc, r4 ) @ call kernel
M_CLASS( add r4, r4, #1 ) @ enter in Thumb mode for M class
THUMB( bx r4 ) @ entry point is always ARM for A/R classes

View File

@ -69,7 +69,7 @@
timer@20200 {
compatible = "arm,cortex-a9-global-timer";
reg = <0x20200 0x100>;
interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
clocks = <&periph_clk>;
};

View File

@ -21,8 +21,8 @@
stdout-path = "serial2:115200n8";
};
memory {
device_type = "memory";
memory@c0000000 {
/* 128 MB DDR2 SDRAM @ 0xc0000000 */
reg = <0xc0000000 0x08000000>;
};

View File

@ -7,10 +7,19 @@
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include "skeleton.dtsi"
#include <dt-bindings/interrupt-controller/irq.h>
/ {
#address-cells = <1>;
#size-cells = <1>;
chosen { };
aliases { };
memory@c0000000 {
device_type = "memory";
reg = <0xc0000000 0x0>;
};
arm {
#address-cells = <1>;
#size-cells = <1>;
@ -46,8 +55,6 @@
pmx_core: pinmux@14120 {
compatible = "pinctrl-single";
reg = <0x14120 0x50>;
#address-cells = <1>;
#size-cells = <0>;
#pinctrl-cells = <2>;
pinctrl-single,bit-per-mux;
pinctrl-single,register-width = <32>;

View File

@ -10,7 +10,7 @@
/ {
model = "DM8148 EVM";
compatible = "ti,dm8148-evm", "ti,dm8148";
compatible = "ti,dm8148-evm", "ti,dm8148", "ti,dm814";
memory@80000000 {
device_type = "memory";

View File

@ -9,7 +9,7 @@
/ {
model = "HP t410 Smart Zero Client";
compatible = "hp,t410", "ti,dm8148";
compatible = "hp,t410", "ti,dm8148", "ti,dm814";
memory@80000000 {
device_type = "memory";

View File

@ -10,7 +10,7 @@
/ {
model = "DM8168 EVM";
compatible = "ti,dm8168-evm", "ti,dm8168";
compatible = "ti,dm8168-evm", "ti,dm8168", "ti,dm816";
memory@80000000 {
device_type = "memory";

View File

@ -10,7 +10,7 @@
/ {
model = "DRA62x J5 Eco EVM";
compatible = "ti,dra62x-j5eco-evm", "ti,dra62x", "ti,dm8148";
compatible = "ti,dra62x-j5eco-evm", "ti,dra62x", "ti,dm8148", "ti,dm814";
memory@80000000 {
device_type = "memory";

View File

@ -523,7 +523,7 @@
};
touchscreen@20 {
compatible = "syna,rmi4_i2c";
compatible = "syna,rmi4-i2c";
reg = <0x20>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ts>;
@ -541,8 +541,8 @@
rmi4-f11@11 {
reg = <0x11>;
touch-inverted-y;
touch-swapped-x-y;
touchscreen-inverted-y;
touchscreen-swapped-x-y;
syna,sensor-type = <1>;
};
};

View File

@ -868,6 +868,7 @@
crypto: caam@30900000 {
compatible = "fsl,sec-v4.0";
fsl,sec-era = <8>;
#address-cells = <1>;
#size-cells = <1>;
reg = <0x30900000 0x40000>;

View File

@ -26,7 +26,7 @@
gpio = <&gpio1 3 0>; /* gpio_3 */
startup-delay-us = <70000>;
enable-active-high;
vin-supply = <&vmmc2>;
vin-supply = <&vaux3>;
};
/* HS USB Host PHY on PORT 1 */
@ -82,6 +82,7 @@
twl_audio: audio {
compatible = "ti,twl4030-audio";
codec {
ti,hs_extmute_gpio = <&gpio2 25 GPIO_ACTIVE_HIGH>;
};
};
};
@ -199,6 +200,7 @@
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */
OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */
OMAP3_CORE1_IOPAD(0x20ba, PIN_OUTPUT | MUX_MODE4) /* gpmc_ncs6.gpio_57 */
>;
};
};
@ -213,7 +215,7 @@
};
wl127x_gpio: pinmux_wl127x_gpio_pin {
pinctrl-single,pins = <
OMAP3_WKUP_IOPAD(0x2a0c, PIN_INPUT | MUX_MODE4) /* sys_boot0.gpio_2 */
OMAP3_WKUP_IOPAD(0x2a0a, PIN_INPUT | MUX_MODE4) /* sys_boot0.gpio_2 */
OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4) /* sys_boot1.gpio_3 */
>;
};
@ -260,6 +262,11 @@
#include "twl4030.dtsi"
#include "twl4030_omap3.dtsi"
&vaux3 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
&twl {
twl_power: power {
compatible = "ti,twl4030-power-idle-osc-off", "ti,twl4030-power-idle";

View File

@ -379,7 +379,7 @@
port@0 {
reg = <0>;
adv7511_in: endpoint {
remote-endpoint = <&du_out_lvds0>;
remote-endpoint = <&lvds0_out>;
};
};
@ -467,10 +467,8 @@
status = "okay";
clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>,
<&cpg CPG_MOD 726>, <&cpg CPG_MOD 725>,
<&x13_clk>, <&x2_clk>;
clock-names = "du.0", "du.1", "du.2", "lvds.0", "lvds.1",
"dclkin.0", "dclkin.1";
clock-names = "du.0", "du.1", "du.2", "dclkin.0", "dclkin.1";
ports {
port@0 {
@ -478,12 +476,26 @@
remote-endpoint = <&adv7123_in>;
};
};
};
};
&lvds0 {
status = "okay";
ports {
port@1 {
endpoint {
remote-endpoint = <&adv7511_in>;
};
};
port@2 {
};
};
&lvds1 {
status = "okay";
ports {
port@1 {
lvds_connector: endpoint {
};
};

View File

@ -1627,18 +1627,13 @@
du: display@feb00000 {
compatible = "renesas,du-r8a7790";
reg = <0 0xfeb00000 0 0x70000>,
<0 0xfeb90000 0 0x1c>,
<0 0xfeb94000 0 0x1c>;
reg-names = "du", "lvds.0", "lvds.1";
reg = <0 0xfeb00000 0 0x70000>;
interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
<&cpg CPG_MOD 722>, <&cpg CPG_MOD 726>,
<&cpg CPG_MOD 725>;
clock-names = "du.0", "du.1", "du.2", "lvds.0",
"lvds.1";
<&cpg CPG_MOD 722>;
clock-names = "du.0", "du.1", "du.2";
status = "disabled";
ports {
@ -1653,11 +1648,65 @@
port@1 {
reg = <1>;
du_out_lvds0: endpoint {
remote-endpoint = <&lvds0_in>;
};
};
port@2 {
reg = <2>;
du_out_lvds1: endpoint {
remote-endpoint = <&lvds1_in>;
};
};
};
};
lvds0: lvds@feb90000 {
compatible = "renesas,r8a7790-lvds";
reg = <0 0xfeb90000 0 0x1c>;
clocks = <&cpg CPG_MOD 726>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 726>;
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
lvds0_in: endpoint {
remote-endpoint = <&du_out_lvds0>;
};
};
port@1 {
reg = <1>;
lvds0_out: endpoint {
};
};
};
};
lvds1: lvds@feb94000 {
compatible = "renesas,r8a7790-lvds";
reg = <0 0xfeb94000 0 0x1c>;
clocks = <&cpg CPG_MOD 725>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 725>;
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
lvds1_in: endpoint {
remote-endpoint = <&du_out_lvds1>;
};
};
port@1 {
reg = <1>;
lvds1_out: endpoint {
};
};
};

View File

@ -468,10 +468,9 @@
pinctrl-names = "default";
status = "okay";
clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 726>,
clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
<&x13_clk>, <&x2_clk>;
clock-names = "du.0", "du.1", "lvds.0",
"dclkin.0", "dclkin.1";
clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
ports {
port@0 {
@ -479,6 +478,13 @@
remote-endpoint = <&adv7511_in>;
};
};
};
};
&lvds0 {
status = "okay";
ports {
port@1 {
lvds_connector: endpoint {
};

View File

@ -441,10 +441,9 @@
pinctrl-names = "default";
status = "okay";
clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 726>,
clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
<&x3_clk>, <&x16_clk>;
clock-names = "du.0", "du.1", "lvds.0",
"dclkin.0", "dclkin.1";
clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
ports {
port@0 {
@ -455,6 +454,17 @@
};
};
&lvds0 {
status = "okay";
ports {
port@1 {
lvds_connector: endpoint {
};
};
};
};
&rcar_sound {
pinctrl-0 = <&ssi_pins &audio_clk_pins>;
pinctrl-names = "default";

View File

@ -1633,15 +1633,12 @@
du: display@feb00000 {
compatible = "renesas,du-r8a7791";
reg = <0 0xfeb00000 0 0x40000>,
<0 0xfeb90000 0 0x1c>;
reg-names = "du", "lvds.0";
reg = <0 0xfeb00000 0 0x40000>;
interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 724>,
<&cpg CPG_MOD 723>,
<&cpg CPG_MOD 726>;
clock-names = "du.0", "du.1", "lvds.0";
<&cpg CPG_MOD 723>;
clock-names = "du.0", "du.1";
status = "disabled";
ports {
@ -1656,6 +1653,33 @@
port@1 {
reg = <1>;
du_out_lvds0: endpoint {
remote-endpoint = <&lvds0_in>;
};
};
};
};
lvds0: lvds@feb90000 {
compatible = "renesas,r8a7791-lvds";
reg = <0 0xfeb90000 0 0x1c>;
clocks = <&cpg CPG_MOD 726>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
resets = <&cpg 726>;
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
lvds0_in: endpoint {
remote-endpoint = <&du_out_lvds0>;
};
};
port@1 {
reg = <1>;
lvds0_out: endpoint {
};
};
};

View File

@ -447,10 +447,9 @@
pinctrl-names = "default";
status = "okay";
clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 726>,
clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
<&x13_clk>, <&x2_clk>;
clock-names = "du.0", "du.1", "lvds.0",
"dclkin.0", "dclkin.1";
clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
ports {
port@0 {
@ -458,6 +457,11 @@
remote-endpoint = <&adv7511_in>;
};
};
};
};
&lvds0 {
ports {
port@1 {
lvds_connector: endpoint {
};

View File

@ -1292,15 +1292,12 @@
du: display@feb00000 {
compatible = "renesas,du-r8a7793";
reg = <0 0xfeb00000 0 0x40000>,
<0 0xfeb90000 0 0x1c>;
reg-names = "du", "lvds.0";
reg = <0 0xfeb00000 0 0x40000>;
interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 724>,
<&cpg CPG_MOD 723>,
<&cpg CPG_MOD 726>;
clock-names = "du.0", "du.1", "lvds.0";
<&cpg CPG_MOD 723>;
clock-names = "du.0", "du.1";
status = "disabled";
ports {
@ -1315,6 +1312,34 @@
port@1 {
reg = <1>;
du_out_lvds0: endpoint {
remote-endpoint = <&lvds0_in>;
};
};
};
};
lvds0: lvds@feb90000 {
compatible = "renesas,r8a7793-lvds";
reg = <0 0xfeb90000 0 0x1c>;
clocks = <&cpg CPG_MOD 726>;
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
resets = <&cpg 726>;
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
lvds0_in: endpoint {
remote-endpoint = <&du_out_lvds0>;
};
};
port@1 {
reg = <1>;
lvds0_out: endpoint {
};
};
};

View File

@ -741,7 +741,7 @@
phy_type = "ulpi";
clocks = <&tegra_car TEGRA20_CLK_USB2>,
<&tegra_car TEGRA20_CLK_PLL_U>,
<&tegra_car TEGRA20_CLK_PLL_P_OUT4>;
<&tegra_car TEGRA20_CLK_CDEV2>;
clock-names = "reg", "pll_u", "ulpi-link";
resets = <&tegra_car 58>, <&tegra_car 22>;
reset-names = "usb", "utmi-pads";

View File

@ -536,4 +536,14 @@ THUMB( orr \reg , \reg , #PSR_T_BIT )
#endif
.endm
#ifdef CONFIG_KPROBES
#define _ASM_NOKPROBE(entry) \
.pushsection "_kprobe_blacklist", "aw" ; \
.balign 4 ; \
.long entry; \
.popsection
#else
#define _ASM_NOKPROBE(entry)
#endif
#endif /* __ASM_ASSEMBLER_H__ */

View File

@ -309,6 +309,22 @@ static inline unsigned int kvm_get_vmid_bits(void)
return 8;
}
/*
* We are not in the kvm->srcu critical section most of the time, so we take
* the SRCU read lock here. Since we copy the data from the user page, we
* can immediately drop the lock again.
*/
static inline int kvm_read_guest_lock(struct kvm *kvm,
gpa_t gpa, void *data, unsigned long len)
{
int srcu_idx = srcu_read_lock(&kvm->srcu);
int ret = kvm_read_guest(kvm, gpa, data, len);
srcu_read_unlock(&kvm->srcu, srcu_idx);
return ret;
}
static inline void *kvm_get_hyp_vector(void)
{
return kvm_ksym_ref(__kvm_hyp_vector);

View File

@ -1,13 +0,0 @@
#ifndef __ASM_SIGINFO_H
#define __ASM_SIGINFO_H
#include <asm-generic/siginfo.h>
/*
* SIGFPE si_codes
*/
#ifdef __KERNEL__
#define FPE_FIXME 0 /* Broken dup of SI_USER */
#endif /* __KERNEL__ */
#endif

View File

@ -83,7 +83,7 @@ void machine_crash_nonpanic_core(void *unused)
{
struct pt_regs regs;
crash_setup_regs(&regs, NULL);
crash_setup_regs(&regs, get_irq_regs());
printk(KERN_DEBUG "CPU %u will stop doing anything useful since another CPU has crashed\n",
smp_processor_id());
crash_save_cpu(&regs, smp_processor_id());
@ -95,6 +95,27 @@ void machine_crash_nonpanic_core(void *unused)
cpu_relax();
}
void crash_smp_send_stop(void)
{
static int cpus_stopped;
unsigned long msecs;
if (cpus_stopped)
return;
atomic_set(&waiting_for_crash_ipi, num_online_cpus() - 1);
smp_call_function(machine_crash_nonpanic_core, NULL, false);
msecs = 1000; /* Wait at most a second for the other cpus to stop */
while ((atomic_read(&waiting_for_crash_ipi) > 0) && msecs) {
mdelay(1);
msecs--;
}
if (atomic_read(&waiting_for_crash_ipi) > 0)
pr_warn("Non-crashing CPUs did not react to IPI\n");
cpus_stopped = 1;
}
static void machine_kexec_mask_interrupts(void)
{
unsigned int i;
@ -120,19 +141,8 @@ static void machine_kexec_mask_interrupts(void)
void machine_crash_shutdown(struct pt_regs *regs)
{
unsigned long msecs;
local_irq_disable();
atomic_set(&waiting_for_crash_ipi, num_online_cpus() - 1);
smp_call_function(machine_crash_nonpanic_core, NULL, false);
msecs = 1000; /* Wait at most a second for the other cpus to stop */
while ((atomic_read(&waiting_for_crash_ipi) > 0) && msecs) {
mdelay(1);
msecs--;
}
if (atomic_read(&waiting_for_crash_ipi) > 0)
pr_warn("Non-crashing CPUs did not react to IPI\n");
crash_smp_send_stop();
crash_save_cpu(regs, smp_processor_id());
machine_kexec_mask_interrupts();

View File

@ -19,6 +19,7 @@
#include <linux/uaccess.h>
#include <linux/hardirq.h>
#include <linux/kdebug.h>
#include <linux/kprobes.h>
#include <linux/module.h>
#include <linux/kexec.h>
#include <linux/bug.h>
@ -417,7 +418,8 @@ void unregister_undef_hook(struct undef_hook *hook)
raw_spin_unlock_irqrestore(&undef_lock, flags);
}
static int call_undef_hook(struct pt_regs *regs, unsigned int instr)
static nokprobe_inline
int call_undef_hook(struct pt_regs *regs, unsigned int instr)
{
struct undef_hook *hook;
unsigned long flags;
@ -490,6 +492,7 @@ die_sig:
arm_notify_die("Oops - undefined instruction", regs, &info, 0, 6);
}
NOKPROBE_SYMBOL(do_undefinstr)
/*
* Handle FIQ similarly to NMI on x86 systems.

View File

@ -38,6 +38,7 @@ ENTRY(__get_user_1)
mov r0, #0
ret lr
ENDPROC(__get_user_1)
_ASM_NOKPROBE(__get_user_1)
ENTRY(__get_user_2)
check_uaccess r0, 2, r1, r2, __get_user_bad
@ -58,6 +59,7 @@ rb .req r0
mov r0, #0
ret lr
ENDPROC(__get_user_2)
_ASM_NOKPROBE(__get_user_2)
ENTRY(__get_user_4)
check_uaccess r0, 4, r1, r2, __get_user_bad
@ -65,6 +67,7 @@ ENTRY(__get_user_4)
mov r0, #0
ret lr
ENDPROC(__get_user_4)
_ASM_NOKPROBE(__get_user_4)
ENTRY(__get_user_8)
check_uaccess r0, 8, r1, r2, __get_user_bad8
@ -78,6 +81,7 @@ ENTRY(__get_user_8)
mov r0, #0
ret lr
ENDPROC(__get_user_8)
_ASM_NOKPROBE(__get_user_8)
#ifdef __ARMEB__
ENTRY(__get_user_32t_8)
@ -91,6 +95,7 @@ ENTRY(__get_user_32t_8)
mov r0, #0
ret lr
ENDPROC(__get_user_32t_8)
_ASM_NOKPROBE(__get_user_32t_8)
ENTRY(__get_user_64t_1)
check_uaccess r0, 1, r1, r2, __get_user_bad8
@ -98,6 +103,7 @@ ENTRY(__get_user_64t_1)
mov r0, #0
ret lr
ENDPROC(__get_user_64t_1)
_ASM_NOKPROBE(__get_user_64t_1)
ENTRY(__get_user_64t_2)
check_uaccess r0, 2, r1, r2, __get_user_bad8
@ -114,6 +120,7 @@ rb .req r0
mov r0, #0
ret lr
ENDPROC(__get_user_64t_2)
_ASM_NOKPROBE(__get_user_64t_2)
ENTRY(__get_user_64t_4)
check_uaccess r0, 4, r1, r2, __get_user_bad8
@ -121,6 +128,7 @@ ENTRY(__get_user_64t_4)
mov r0, #0
ret lr
ENDPROC(__get_user_64t_4)
_ASM_NOKPROBE(__get_user_64t_4)
#endif
__get_user_bad8:
@ -131,6 +139,8 @@ __get_user_bad:
ret lr
ENDPROC(__get_user_bad)
ENDPROC(__get_user_bad8)
_ASM_NOKPROBE(__get_user_bad)
_ASM_NOKPROBE(__get_user_bad8)
.pushsection __ex_table, "a"
.long 1b, __get_user_bad

View File

@ -205,12 +205,17 @@ static const short da830_evm_mmc_sd_pins[] = {
-1
};
#define DA830_MMCSD_WP_PIN GPIO_TO_PIN(2, 1)
#define DA830_MMCSD_CD_PIN GPIO_TO_PIN(2, 2)
static struct gpiod_lookup_table mmc_gpios_table = {
.dev_id = "da830-mmc.0",
.table = {
/* gpio chip 1 contains gpio range 32-63 */
GPIO_LOOKUP("davinci_gpio.1", 2, "cd", GPIO_ACTIVE_LOW),
GPIO_LOOKUP("davinci_gpio.1", 1, "wp", GPIO_ACTIVE_LOW),
GPIO_LOOKUP("davinci_gpio.0", DA830_MMCSD_CD_PIN, "cd",
GPIO_ACTIVE_LOW),
GPIO_LOOKUP("davinci_gpio.0", DA830_MMCSD_WP_PIN, "wp",
GPIO_ACTIVE_LOW),
},
};

View File

@ -763,12 +763,17 @@ static const short da850_evm_mcasp_pins[] __initconst = {
-1
};
#define DA850_MMCSD_CD_PIN GPIO_TO_PIN(4, 0)
#define DA850_MMCSD_WP_PIN GPIO_TO_PIN(4, 1)
static struct gpiod_lookup_table mmc_gpios_table = {
.dev_id = "da830-mmc.0",
.table = {
/* gpio chip 2 contains gpio range 64-95 */
GPIO_LOOKUP("davinci_gpio.2", 0, "cd", GPIO_ACTIVE_LOW),
GPIO_LOOKUP("davinci_gpio.2", 1, "wp", GPIO_ACTIVE_LOW),
GPIO_LOOKUP("davinci_gpio.0", DA850_MMCSD_CD_PIN, "cd",
GPIO_ACTIVE_LOW),
GPIO_LOOKUP("davinci_gpio.0", DA850_MMCSD_WP_PIN, "wp",
GPIO_ACTIVE_LOW),
},
};

View File

@ -19,6 +19,7 @@
#include <linux/gpio.h>
#include <linux/gpio/machine.h>
#include <linux/clk.h>
#include <linux/dm9000.h>
#include <linux/videodev2.h>
#include <media/i2c/tvp514x.h>
#include <linux/spi/spi.h>
@ -109,12 +110,15 @@ static struct platform_device davinci_nand_device = {
},
};
#define DM355_I2C_SDA_PIN GPIO_TO_PIN(0, 15)
#define DM355_I2C_SCL_PIN GPIO_TO_PIN(0, 14)
static struct gpiod_lookup_table i2c_recovery_gpiod_table = {
.dev_id = "i2c_davinci",
.dev_id = "i2c_davinci.1",
.table = {
GPIO_LOOKUP("davinci_gpio", 15, "sda",
GPIO_LOOKUP("davinci_gpio.0", DM355_I2C_SDA_PIN, "sda",
GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
GPIO_LOOKUP("davinci_gpio", 14, "scl",
GPIO_LOOKUP("davinci_gpio.0", DM355_I2C_SCL_PIN, "scl",
GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
},
};
@ -179,11 +183,16 @@ static struct resource dm355evm_dm9000_rsrc[] = {
},
};
static struct dm9000_plat_data dm335evm_dm9000_platdata;
static struct platform_device dm355evm_dm9000 = {
.name = "dm9000",
.id = -1,
.resource = dm355evm_dm9000_rsrc,
.num_resources = ARRAY_SIZE(dm355evm_dm9000_rsrc),
.dev = {
.platform_data = &dm335evm_dm9000_platdata,
},
};
static struct tvp514x_platform_data tvp5146_pdata = {

View File

@ -17,6 +17,7 @@
#include <linux/i2c.h>
#include <linux/platform_data/pcf857x.h>
#include <linux/platform_data/at24.h>
#include <linux/platform_data/gpio-davinci.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
@ -596,12 +597,15 @@ static struct i2c_board_info __initdata i2c_info[] = {
},
};
#define DM644X_I2C_SDA_PIN GPIO_TO_PIN(2, 12)
#define DM644X_I2C_SCL_PIN GPIO_TO_PIN(2, 11)
static struct gpiod_lookup_table i2c_recovery_gpiod_table = {
.dev_id = "i2c_davinci",
.dev_id = "i2c_davinci.1",
.table = {
GPIO_LOOKUP("davinci_gpio", 44, "sda",
GPIO_LOOKUP("davinci_gpio.0", DM644X_I2C_SDA_PIN, "sda",
GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
GPIO_LOOKUP("davinci_gpio", 43, "scl",
GPIO_LOOKUP("davinci_gpio.0", DM644X_I2C_SCL_PIN, "scl",
GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
},
};

View File

@ -532,11 +532,12 @@ static struct vpif_display_config dm646x_vpif_display_config = {
.set_clock = set_vpif_clock,
.subdevinfo = dm646x_vpif_subdev,
.subdev_count = ARRAY_SIZE(dm646x_vpif_subdev),
.i2c_adapter_id = 1,
.chan_config[0] = {
.outputs = dm6467_ch0_outputs,
.output_count = ARRAY_SIZE(dm6467_ch0_outputs),
},
.card_name = "DM646x EVM",
.card_name = "DM646x EVM Video Display",
};
/**
@ -674,6 +675,7 @@ static struct vpif_capture_config dm646x_vpif_capture_cfg = {
.setup_input_channel_mode = setup_vpif_input_channel_mode,
.subdev_info = vpif_capture_sdev_info,
.subdev_count = ARRAY_SIZE(vpif_capture_sdev_info),
.i2c_adapter_id = 1,
.chan_config[0] = {
.inputs = dm6467_ch0_inputs,
.input_count = ARRAY_SIZE(dm6467_ch0_inputs),
@ -694,6 +696,7 @@ static struct vpif_capture_config dm646x_vpif_capture_cfg = {
.fid_pol = 0,
},
},
.card_name = "DM646x EVM Video Capture",
};
static void __init evm_init_video(void)

View File

@ -123,12 +123,16 @@ static const short hawk_mmcsd0_pins[] = {
-1
};
#define DA850_HAWK_MMCSD_CD_PIN GPIO_TO_PIN(3, 12)
#define DA850_HAWK_MMCSD_WP_PIN GPIO_TO_PIN(3, 13)
static struct gpiod_lookup_table mmc_gpios_table = {
.dev_id = "da830-mmc.0",
.table = {
/* CD: gpio3_12: gpio60: chip 1 contains gpio range 32-63*/
GPIO_LOOKUP("davinci_gpio.0", 28, "cd", GPIO_ACTIVE_LOW),
GPIO_LOOKUP("davinci_gpio.0", 29, "wp", GPIO_ACTIVE_LOW),
GPIO_LOOKUP("davinci_gpio.0", DA850_HAWK_MMCSD_CD_PIN, "cd",
GPIO_ACTIVE_LOW),
GPIO_LOOKUP("davinci_gpio.0", DA850_HAWK_MMCSD_WP_PIN, "wp",
GPIO_ACTIVE_LOW),
},
};

View File

@ -488,7 +488,8 @@ static u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = {
[IRQ_DM646X_MCASP0TXINT] = 7,
[IRQ_DM646X_MCASP0RXINT] = 7,
[IRQ_DM646X_RESERVED_3] = 7,
[IRQ_DM646X_MCASP1TXINT] = 7, /* clockevent */
[IRQ_DM646X_MCASP1TXINT] = 7,
[IRQ_TINT0_TINT12] = 7, /* clockevent */
[IRQ_TINT0_TINT34] = 7, /* clocksource */
[IRQ_TINT1_TINT12] = 7, /* DSP timer */
[IRQ_TINT1_TINT34] = 7, /* system tick */

View File

@ -29,6 +29,7 @@ static struct dev_pm_domain keystone_pm_domain = {
static struct pm_clk_notifier_block platform_domain_notifier = {
.pm_domain = &keystone_pm_domain,
.con_ids = { NULL },
};
static const struct of_device_id of_keystone_table[] = {

View File

@ -58,22 +58,24 @@ static irqreturn_t deferred_fiq(int irq, void *dev_id)
irq_num = gpio_to_irq(gpio);
fiq_count = fiq_buffer[FIQ_CNT_INT_00 + gpio];
while (irq_counter[gpio] < fiq_count) {
if (gpio != AMS_DELTA_GPIO_PIN_KEYBRD_CLK) {
struct irq_data *d = irq_get_irq_data(irq_num);
if (irq_counter[gpio] < fiq_count &&
gpio != AMS_DELTA_GPIO_PIN_KEYBRD_CLK) {
struct irq_data *d = irq_get_irq_data(irq_num);
/*
* It looks like handle_edge_irq() that
* OMAP GPIO edge interrupts default to,
* expects interrupt already unmasked.
*/
if (irq_chip && irq_chip->irq_unmask)
/*
* handle_simple_irq() that OMAP GPIO edge
* interrupts default to since commit 80ac93c27441
* requires interrupt already acked and unmasked.
*/
if (irq_chip) {
if (irq_chip->irq_ack)
irq_chip->irq_ack(d);
if (irq_chip->irq_unmask)
irq_chip->irq_unmask(d);
}
generic_handle_irq(irq_num);
irq_counter[gpio]++;
}
for (; irq_counter[gpio] < fiq_count; irq_counter[gpio]++)
generic_handle_irq(irq_num);
}
return IRQ_HANDLED;
}

View File

@ -188,7 +188,7 @@ static int _pwrdm_state_switch(struct powerdomain *pwrdm, int flag)
((prev & OMAP_POWERSTATE_MASK) << 0));
trace_power_domain_target_rcuidle(pwrdm->name,
trace_state,
smp_processor_id());
raw_smp_processor_id());
}
break;
default:
@ -518,7 +518,7 @@ int pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
if (arch_pwrdm && arch_pwrdm->pwrdm_set_next_pwrst) {
/* Trace the pwrdm desired target state */
trace_power_domain_target_rcuidle(pwrdm->name, pwrst,
smp_processor_id());
raw_smp_processor_id());
/* Program the pwrdm desired target state */
ret = arch_pwrdm->pwrdm_set_next_pwrst(pwrdm, pwrst);
}

View File

@ -165,13 +165,14 @@ optimized_callback(struct optimized_kprobe *op, struct pt_regs *regs)
{
unsigned long flags;
struct kprobe *p = &op->kp;
struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
struct kprobe_ctlblk *kcb;
/* Save skipped registers */
regs->ARM_pc = (unsigned long)op->kp.addr;
regs->ARM_ORIG_r0 = ~0UL;
local_irq_save(flags);
kcb = get_kprobe_ctlblk();
if (kprobe_running()) {
kprobes_inc_nmissed_count(&op->kp);
@ -191,6 +192,7 @@ optimized_callback(struct optimized_kprobe *op, struct pt_regs *regs)
local_irq_restore(flags);
}
NOKPROBE_SYMBOL(optimized_callback)
int arch_prepare_optimized_kprobe(struct optimized_kprobe *op, struct kprobe *orig)
{

View File

@ -257,7 +257,7 @@ static void vfp_raise_exceptions(u32 exceptions, u32 inst, u32 fpscr, struct pt_
if (exceptions == VFP_EXCEPTION_ERROR) {
vfp_panic("unhandled bounce", inst);
vfp_raise_sigfpe(FPE_FIXME, regs);
vfp_raise_sigfpe(FPE_FLTINV, regs);
return;
}

View File

@ -1317,7 +1317,7 @@
reg = <0x14d60000 0x100>;
dmas = <&pdma0 31 &pdma0 30>;
dma-names = "tx", "rx";
interrupts = <GIC_SPI 435 IRQ_TYPE_NONE>;
interrupts = <GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu_peric CLK_PCLK_I2S1>,
<&cmu_peric CLK_PCLK_I2S1>,
<&cmu_peric CLK_SCLK_I2S1>;

View File

@ -38,9 +38,10 @@
compatible = "marvell,armada-7k-pp22";
reg = <0x0 0x100000>, <0x129000 0xb000>;
clocks = <&CP110_LABEL(clk) 1 3>, <&CP110_LABEL(clk) 1 9>,
<&CP110_LABEL(clk) 1 5>, <&CP110_LABEL(clk) 1 18>;
<&CP110_LABEL(clk) 1 5>, <&CP110_LABEL(clk) 1 6>,
<&CP110_LABEL(clk) 1 18>;
clock-names = "pp_clk", "gop_clk",
"mg_clk", "axi_clk";
"mg_clk", "mg_core_clk", "axi_clk";
marvell,system-controller = <&CP110_LABEL(syscon0)>;
status = "disabled";
dma-coherent;
@ -141,6 +142,8 @@
#size-cells = <0>;
compatible = "marvell,xmdio";
reg = <0x12a600 0x10>;
clocks = <&CP110_LABEL(clk) 1 5>,
<&CP110_LABEL(clk) 1 6>, <&CP110_LABEL(clk) 1 18>;
status = "disabled";
};

View File

@ -46,7 +46,7 @@
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0x0>;
interrupt-parent = <&gpio>;
interrupts = <TEGRA_MAIN_GPIO(M, 5) IRQ_TYPE_LEVEL_HIGH>;
interrupts = <TEGRA_MAIN_GPIO(M, 5) IRQ_TYPE_LEVEL_LOW>;
};
};
};

View File

@ -414,7 +414,7 @@
mmc-ddr-1_8v;
mmc-hs200-1_8v;
mmc-pwrseq = <&emmc_pwrseq>;
cdns,phy-input-delay-legacy = <4>;
cdns,phy-input-delay-legacy = <9>;
cdns,phy-input-delay-mmc-highspeed = <2>;
cdns,phy-input-delay-mmc-ddr = <3>;
cdns,phy-dll-delay-sdclk = <21>;

View File

@ -67,3 +67,11 @@
reg = <0>;
};
};
&pinctrl_ether_rgmii {
tx {
pins = "RGMII_TXCLK", "RGMII_TXD0", "RGMII_TXD1",
"RGMII_TXD2", "RGMII_TXD3", "RGMII_TXCTL";
drive-strength = <9>;
};
};

View File

@ -519,7 +519,7 @@
mmc-ddr-1_8v;
mmc-hs200-1_8v;
mmc-pwrseq = <&emmc_pwrseq>;
cdns,phy-input-delay-legacy = <4>;
cdns,phy-input-delay-legacy = <9>;
cdns,phy-input-delay-mmc-highspeed = <2>;
cdns,phy-input-delay-mmc-ddr = <3>;
cdns,phy-dll-delay-sdclk = <21>;

View File

@ -334,7 +334,7 @@
mmc-ddr-1_8v;
mmc-hs200-1_8v;
mmc-pwrseq = <&emmc_pwrseq>;
cdns,phy-input-delay-legacy = <4>;
cdns,phy-input-delay-legacy = <9>;
cdns,phy-input-delay-mmc-highspeed = <2>;
cdns,phy-input-delay-mmc-ddr = <3>;
cdns,phy-dll-delay-sdclk = <21>;

View File

@ -360,6 +360,22 @@ static inline unsigned int kvm_get_vmid_bits(void)
return (cpuid_feature_extract_unsigned_field(reg, ID_AA64MMFR1_VMIDBITS_SHIFT) == 2) ? 16 : 8;
}
/*
* We are not in the kvm->srcu critical section most of the time, so we take
* the SRCU read lock here. Since we copy the data from the user page, we
* can immediately drop the lock again.
*/
static inline int kvm_read_guest_lock(struct kvm *kvm,
gpa_t gpa, void *data, unsigned long len)
{
int srcu_idx = srcu_read_lock(&kvm->srcu);
int ret = kvm_read_guest(kvm, gpa, data, len);
srcu_read_unlock(&kvm->srcu, srcu_idx);
return ret;
}
#ifdef CONFIG_KVM_INDIRECT_VECTORS
/*
* EL2 vectors can be mapped and rerouted in a number of ways,

View File

@ -18,9 +18,9 @@
#define PORT(offset) (CKSEG1ADDR(AR7_REGS_UART0) + (4 * offset))
#endif
#if defined(CONFIG_MACH_JZ4740) || defined(CONFIG_MACH_JZ4780)
#include <asm/mach-jz4740/base.h>
#define PORT(offset) (CKSEG1ADDR(JZ4740_UART0_BASE_ADDR) + (4 * offset))
#ifdef CONFIG_MACH_INGENIC
#define INGENIC_UART0_BASE_ADDR 0x10030000
#define PORT(offset) (CKSEG1ADDR(INGENIC_UART0_BASE_ADDR) + (4 * offset))
#endif
#ifdef CONFIG_CPU_XLR

View File

@ -1,4 +1,2 @@
# SPDX-License-Identifier: GPL-2.0
dtb-$(CONFIG_FIT_IMAGE_FDT_XILFPGA) += nexys4ddr.dtb
obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y))

View File

@ -16,3 +16,4 @@ all-$(CONFIG_MIPS_GENERIC) := vmlinux.gz.itb
its-y := vmlinux.its.S
its-$(CONFIG_FIT_IMAGE_FDT_BOSTON) += board-boston.its.S
its-$(CONFIG_FIT_IMAGE_FDT_NI169445) += board-ni169445.its.S
its-$(CONFIG_FIT_IMAGE_FDT_XILFPGA) += board-xilfpga.its.S

View File

@ -463,7 +463,7 @@ static int fpr_get_msa(struct task_struct *target,
/*
* Copy the floating-point context to the supplied NT_PRFPREG buffer.
* Choose the appropriate helper for general registers, and then copy
* the FCSR register separately.
* the FCSR and FIR registers separately.
*/
static int fpr_get(struct task_struct *target,
const struct user_regset *regset,
@ -471,6 +471,7 @@ static int fpr_get(struct task_struct *target,
void *kbuf, void __user *ubuf)
{
const int fcr31_pos = NUM_FPU_REGS * sizeof(elf_fpreg_t);
const int fir_pos = fcr31_pos + sizeof(u32);
int err;
if (sizeof(target->thread.fpu.fpr[0]) == sizeof(elf_fpreg_t))
@ -483,6 +484,12 @@ static int fpr_get(struct task_struct *target,
err = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
&target->thread.fpu.fcr31,
fcr31_pos, fcr31_pos + sizeof(u32));
if (err)
return err;
err = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
&boot_cpu_data.fpu_id,
fir_pos, fir_pos + sizeof(u32));
return err;
}
@ -531,7 +538,8 @@ static int fpr_set_msa(struct task_struct *target,
/*
* Copy the supplied NT_PRFPREG buffer to the floating-point context.
* Choose the appropriate helper for general registers, and then copy
* the FCSR register separately.
* the FCSR register separately. Ignore the incoming FIR register
* contents though, as the register is read-only.
*
* We optimize for the case where `count % sizeof(elf_fpreg_t) == 0',
* which is supposed to have been guaranteed by the kernel before
@ -545,6 +553,7 @@ static int fpr_set(struct task_struct *target,
const void *kbuf, const void __user *ubuf)
{
const int fcr31_pos = NUM_FPU_REGS * sizeof(elf_fpreg_t);
const int fir_pos = fcr31_pos + sizeof(u32);
u32 fcr31;
int err;
@ -572,6 +581,11 @@ static int fpr_set(struct task_struct *target,
ptrace_setfcr31(target, fcr31);
}
if (count > 0)
err = user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
fir_pos,
fir_pos + sizeof(u32));
return err;
}
@ -793,7 +807,7 @@ long arch_ptrace(struct task_struct *child, long request,
fregs = get_fpu_regs(child);
#ifdef CONFIG_32BIT
if (test_thread_flag(TIF_32BIT_FPREGS)) {
if (test_tsk_thread_flag(child, TIF_32BIT_FPREGS)) {
/*
* The odd registers are actually the high
* order bits of the values stored in the even
@ -888,7 +902,7 @@ long arch_ptrace(struct task_struct *child, long request,
init_fp_ctx(child);
#ifdef CONFIG_32BIT
if (test_thread_flag(TIF_32BIT_FPREGS)) {
if (test_tsk_thread_flag(child, TIF_32BIT_FPREGS)) {
/*
* The odd registers are actually the high
* order bits of the values stored in the even

View File

@ -99,7 +99,7 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
break;
}
fregs = get_fpu_regs(child);
if (test_thread_flag(TIF_32BIT_FPREGS)) {
if (test_tsk_thread_flag(child, TIF_32BIT_FPREGS)) {
/*
* The odd registers are actually the high
* order bits of the values stored in the even
@ -212,7 +212,7 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
sizeof(child->thread.fpu));
child->thread.fpu.fcr31 = 0;
}
if (test_thread_flag(TIF_32BIT_FPREGS)) {
if (test_tsk_thread_flag(child, TIF_32BIT_FPREGS)) {
/*
* The odd registers are actually the high
* order bits of the values stored in the even

View File

@ -45,7 +45,7 @@ struct kvm_stats_debugfs_item debugfs_entries[] = {
{ "cache", VCPU_STAT(cache_exits), KVM_STAT_VCPU },
{ "signal", VCPU_STAT(signal_exits), KVM_STAT_VCPU },
{ "interrupt", VCPU_STAT(int_exits), KVM_STAT_VCPU },
{ "cop_unsuable", VCPU_STAT(cop_unusable_exits), KVM_STAT_VCPU },
{ "cop_unusable", VCPU_STAT(cop_unusable_exits), KVM_STAT_VCPU },
{ "tlbmod", VCPU_STAT(tlbmod_exits), KVM_STAT_VCPU },
{ "tlbmiss_ld", VCPU_STAT(tlbmiss_ld_exits), KVM_STAT_VCPU },
{ "tlbmiss_st", VCPU_STAT(tlbmiss_st_exits), KVM_STAT_VCPU },

View File

@ -851,9 +851,12 @@ static void r4k_dma_cache_wback_inv(unsigned long addr, unsigned long size)
/*
* Either no secondary cache or the available caches don't have the
* subset property so we have to flush the primary caches
* explicitly
* explicitly.
* If we would need IPI to perform an INDEX-type operation, then
* we have to use the HIT-type alternative as IPI cannot be used
* here due to interrupts possibly being disabled.
*/
if (size >= dcache_size) {
if (!r4k_op_needs_ipi(R4K_INDEX) && size >= dcache_size) {
r4k_blast_dcache();
} else {
R4600_HIT_CACHEOP_WAR_IMPL;
@ -890,7 +893,7 @@ static void r4k_dma_cache_inv(unsigned long addr, unsigned long size)
return;
}
if (size >= dcache_size) {
if (!r4k_op_needs_ipi(R4K_INDEX) && size >= dcache_size) {
r4k_blast_dcache();
} else {
R4600_HIT_CACHEOP_WAR_IMPL;

View File

@ -268,7 +268,7 @@ static struct parisc_device *find_device_by_addr(unsigned long hpa)
* Walks up the device tree looking for a device of the specified type.
* If it finds it, it returns it. If not, it returns NULL.
*/
const struct parisc_device * __init
const struct parisc_device *
find_pa_parent_type(const struct parisc_device *padev, int type)
{
const struct device *dev = &padev->dev;

View File

@ -423,8 +423,7 @@ int __cpu_up(unsigned int cpu, struct task_struct *tidle)
}
#ifdef CONFIG_PROC_FS
int __init
setup_profiling_timer(unsigned int multiplier)
int setup_profiling_timer(unsigned int multiplier)
{
return -EINVAL;
}

View File

@ -44,6 +44,10 @@ static ssize_t opal_nvram_read(char *buf, size_t count, loff_t *index)
return count;
}
/*
* This can be called in the panic path with interrupts off, so use
* mdelay in that case.
*/
static ssize_t opal_nvram_write(char *buf, size_t count, loff_t *index)
{
s64 rc = OPAL_BUSY;
@ -58,10 +62,16 @@ static ssize_t opal_nvram_write(char *buf, size_t count, loff_t *index)
while (rc == OPAL_BUSY || rc == OPAL_BUSY_EVENT) {
rc = opal_write_nvram(__pa(buf), count, off);
if (rc == OPAL_BUSY_EVENT) {
msleep(OPAL_BUSY_DELAY_MS);
if (in_interrupt() || irqs_disabled())
mdelay(OPAL_BUSY_DELAY_MS);
else
msleep(OPAL_BUSY_DELAY_MS);
opal_poll_events(NULL);
} else if (rc == OPAL_BUSY) {
msleep(OPAL_BUSY_DELAY_MS);
if (in_interrupt() || irqs_disabled())
mdelay(OPAL_BUSY_DELAY_MS);
else
msleep(OPAL_BUSY_DELAY_MS);
}
}

View File

@ -261,9 +261,9 @@ CONFIG_IP_VS_NQ=m
CONFIG_IP_VS_FTP=m
CONFIG_IP_VS_PE_SIP=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_TABLES_IPV4=m
CONFIG_NF_TABLES_IPV4=y
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NF_TABLES_ARP=m
CONFIG_NF_TABLES_ARP=y
CONFIG_NFT_CHAIN_NAT_IPV4=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
@ -284,7 +284,7 @@ CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_NF_TABLES_IPV6=m
CONFIG_NF_TABLES_IPV6=y
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
@ -305,7 +305,7 @@ CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
CONFIG_IP6_NF_NAT=m
CONFIG_IP6_NF_TARGET_MASQUERADE=m
CONFIG_NF_TABLES_BRIDGE=m
CONFIG_NF_TABLES_BRIDGE=y
CONFIG_RDS=m
CONFIG_RDS_RDMA=m
CONFIG_RDS_TCP=m
@ -604,7 +604,6 @@ CONFIG_DETECT_HUNG_TASK=y
CONFIG_WQ_WATCHDOG=y
CONFIG_PANIC_ON_OOPS=y
CONFIG_DEBUG_TIMEKEEPING=y
CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCK_STAT=y
CONFIG_DEBUG_LOCKDEP=y

View File

@ -259,9 +259,9 @@ CONFIG_IP_VS_NQ=m
CONFIG_IP_VS_FTP=m
CONFIG_IP_VS_PE_SIP=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_TABLES_IPV4=m
CONFIG_NF_TABLES_IPV4=y
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NF_TABLES_ARP=m
CONFIG_NF_TABLES_ARP=y
CONFIG_NFT_CHAIN_NAT_IPV4=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
@ -282,7 +282,7 @@ CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_NF_TABLES_IPV6=m
CONFIG_NF_TABLES_IPV6=y
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
@ -303,7 +303,7 @@ CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
CONFIG_IP6_NF_NAT=m
CONFIG_IP6_NF_TARGET_MASQUERADE=m
CONFIG_NF_TABLES_BRIDGE=m
CONFIG_NF_TABLES_BRIDGE=y
CONFIG_RDS=m
CONFIG_RDS_RDMA=m
CONFIG_RDS_TCP=m

View File

@ -13,6 +13,7 @@
*/
#include <linux/linkage.h>
#include <asm/nospec-insn.h>
#include <asm/vx-insn.h>
/* Vector register range containing CRC-32 constants */
@ -67,6 +68,8 @@
.previous
GEN_BR_THUNK %r14
.text
/*
* The CRC-32 function(s) use these calling conventions:
@ -203,6 +206,6 @@ ENTRY(crc32_be_vgfm_16)
.Ldone:
VLGVF %r2,%v2,3
br %r14
BR_EX %r14
.previous

View File

@ -14,6 +14,7 @@
*/
#include <linux/linkage.h>
#include <asm/nospec-insn.h>
#include <asm/vx-insn.h>
/* Vector register range containing CRC-32 constants */
@ -76,6 +77,7 @@
.previous
GEN_BR_THUNK %r14
.text
@ -264,6 +266,6 @@ crc32_le_vgfm_generic:
.Ldone:
VLGVF %r2,%v2,2
br %r14
BR_EX %r14
.previous

View File

@ -0,0 +1,196 @@
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef _ASM_S390_NOSPEC_ASM_H
#define _ASM_S390_NOSPEC_ASM_H
#include <asm/alternative-asm.h>
#include <asm/asm-offsets.h>
#include <asm/dwarf.h>
#ifdef __ASSEMBLY__
#ifdef CONFIG_EXPOLINE
_LC_BR_R1 = __LC_BR_R1
/*
* The expoline macros are used to create thunks in the same format
* as gcc generates them. The 'comdat' section flag makes sure that
* the various thunks are merged into a single copy.
*/
.macro __THUNK_PROLOG_NAME name
.pushsection .text.\name,"axG",@progbits,\name,comdat
.globl \name
.hidden \name
.type \name,@function
\name:
CFI_STARTPROC
.endm
.macro __THUNK_EPILOG
CFI_ENDPROC
.popsection
.endm
.macro __THUNK_PROLOG_BR r1,r2
__THUNK_PROLOG_NAME __s390x_indirect_jump_r\r2\()use_r\r1
.endm
.macro __THUNK_PROLOG_BC d0,r1,r2
__THUNK_PROLOG_NAME __s390x_indirect_branch_\d0\()_\r2\()use_\r1
.endm
.macro __THUNK_BR r1,r2
jg __s390x_indirect_jump_r\r2\()use_r\r1
.endm
.macro __THUNK_BC d0,r1,r2
jg __s390x_indirect_branch_\d0\()_\r2\()use_\r1
.endm
.macro __THUNK_BRASL r1,r2,r3
brasl \r1,__s390x_indirect_jump_r\r3\()use_r\r2
.endm
.macro __DECODE_RR expand,reg,ruse
.set __decode_fail,1
.irp r1,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
.ifc \reg,%r\r1
.irp r2,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
.ifc \ruse,%r\r2
\expand \r1,\r2
.set __decode_fail,0
.endif
.endr
.endif
.endr
.if __decode_fail == 1
.error "__DECODE_RR failed"
.endif
.endm
.macro __DECODE_RRR expand,rsave,rtarget,ruse
.set __decode_fail,1
.irp r1,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
.ifc \rsave,%r\r1
.irp r2,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
.ifc \rtarget,%r\r2
.irp r3,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
.ifc \ruse,%r\r3
\expand \r1,\r2,\r3
.set __decode_fail,0
.endif
.endr
.endif
.endr
.endif
.endr
.if __decode_fail == 1
.error "__DECODE_RRR failed"
.endif
.endm
.macro __DECODE_DRR expand,disp,reg,ruse
.set __decode_fail,1
.irp r1,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
.ifc \reg,%r\r1
.irp r2,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
.ifc \ruse,%r\r2
\expand \disp,\r1,\r2
.set __decode_fail,0
.endif
.endr
.endif
.endr
.if __decode_fail == 1
.error "__DECODE_DRR failed"
.endif
.endm
.macro __THUNK_EX_BR reg,ruse
# Be very careful when adding instructions to this macro!
# The ALTERNATIVE replacement code has a .+10 which targets
# the "br \reg" after the code has been patched.
#ifdef CONFIG_HAVE_MARCH_Z10_FEATURES
exrl 0,555f
j .
#else
.ifc \reg,%r1
ALTERNATIVE "ex %r0,_LC_BR_R1", ".insn ril,0xc60000000000,0,.+10", 35
j .
.else
larl \ruse,555f
ex 0,0(\ruse)
j .
.endif
#endif
555: br \reg
.endm
.macro __THUNK_EX_BC disp,reg,ruse
#ifdef CONFIG_HAVE_MARCH_Z10_FEATURES
exrl 0,556f
j .
#else
larl \ruse,556f
ex 0,0(\ruse)
j .
#endif
556: b \disp(\reg)
.endm
.macro GEN_BR_THUNK reg,ruse=%r1
__DECODE_RR __THUNK_PROLOG_BR,\reg,\ruse
__THUNK_EX_BR \reg,\ruse
__THUNK_EPILOG
.endm
.macro GEN_B_THUNK disp,reg,ruse=%r1
__DECODE_DRR __THUNK_PROLOG_BC,\disp,\reg,\ruse
__THUNK_EX_BC \disp,\reg,\ruse
__THUNK_EPILOG
.endm
.macro BR_EX reg,ruse=%r1
557: __DECODE_RR __THUNK_BR,\reg,\ruse
.pushsection .s390_indirect_branches,"a",@progbits
.long 557b-.
.popsection
.endm
.macro B_EX disp,reg,ruse=%r1
558: __DECODE_DRR __THUNK_BC,\disp,\reg,\ruse
.pushsection .s390_indirect_branches,"a",@progbits
.long 558b-.
.popsection
.endm
.macro BASR_EX rsave,rtarget,ruse=%r1
559: __DECODE_RRR __THUNK_BRASL,\rsave,\rtarget,\ruse
.pushsection .s390_indirect_branches,"a",@progbits
.long 559b-.
.popsection
.endm
#else
.macro GEN_BR_THUNK reg,ruse=%r1
.endm
.macro GEN_B_THUNK disp,reg,ruse=%r1
.endm
.macro BR_EX reg,ruse=%r1
br \reg
.endm
.macro B_EX disp,reg,ruse=%r1
b \disp(\reg)
.endm
.macro BASR_EX rsave,rtarget,ruse=%r1
basr \rsave,\rtarget
.endm
#endif
#endif /* __ASSEMBLY__ */
#endif /* _ASM_S390_NOSPEC_ASM_H */

View File

@ -13,5 +13,11 @@
int verify_sha256_digest(void);
extern u64 kernel_entry;
extern u64 kernel_type;
extern u64 crash_start;
extern u64 crash_size;
#endif /* __ASSEMBLY__ */
#endif /* _S390_PURGATORY_H_ */

View File

@ -65,6 +65,7 @@ obj-y += nospec-branch.o
extra-y += head.o head64.o vmlinux.lds
obj-$(CONFIG_SYSFS) += nospec-sysfs.o
CFLAGS_REMOVE_nospec-branch.o += $(CC_FLAGS_EXPOLINE)
obj-$(CONFIG_MODULES) += module.o

View File

@ -181,6 +181,7 @@ int main(void)
OFFSET(__LC_MACHINE_FLAGS, lowcore, machine_flags);
OFFSET(__LC_PREEMPT_COUNT, lowcore, preempt_count);
OFFSET(__LC_GMAP, lowcore, gmap);
OFFSET(__LC_BR_R1, lowcore, br_r1_trampoline);
/* software defined ABI-relevant lowcore locations 0xe00 - 0xe20 */
OFFSET(__LC_DUMP_REIPL, lowcore, ipib);
/* hardware defined lowcore locations 0x1000 - 0x18ff */

View File

@ -9,18 +9,22 @@
#include <linux/linkage.h>
#include <asm/asm-offsets.h>
#include <asm/nospec-insn.h>
#include <asm/ptrace.h>
#include <asm/sigp.h>
GEN_BR_THUNK %r9
GEN_BR_THUNK %r14
ENTRY(s390_base_mcck_handler)
basr %r13,0
0: lg %r15,__LC_PANIC_STACK # load panic stack
aghi %r15,-STACK_FRAME_OVERHEAD
larl %r1,s390_base_mcck_handler_fn
lg %r1,0(%r1)
ltgr %r1,%r1
lg %r9,0(%r1)
ltgr %r9,%r9
jz 1f
basr %r14,%r1
BASR_EX %r14,%r9
1: la %r1,4095
lmg %r0,%r15,__LC_GPREGS_SAVE_AREA-4095(%r1)
lpswe __LC_MCK_OLD_PSW
@ -37,10 +41,10 @@ ENTRY(s390_base_ext_handler)
basr %r13,0
0: aghi %r15,-STACK_FRAME_OVERHEAD
larl %r1,s390_base_ext_handler_fn
lg %r1,0(%r1)
ltgr %r1,%r1
lg %r9,0(%r1)
ltgr %r9,%r9
jz 1f
basr %r14,%r1
BASR_EX %r14,%r9
1: lmg %r0,%r15,__LC_SAVE_AREA_ASYNC
ni __LC_EXT_OLD_PSW+1,0xfd # clear wait state bit
lpswe __LC_EXT_OLD_PSW
@ -57,10 +61,10 @@ ENTRY(s390_base_pgm_handler)
basr %r13,0
0: aghi %r15,-STACK_FRAME_OVERHEAD
larl %r1,s390_base_pgm_handler_fn
lg %r1,0(%r1)
ltgr %r1,%r1
lg %r9,0(%r1)
ltgr %r9,%r9
jz 1f
basr %r14,%r1
BASR_EX %r14,%r9
lmg %r0,%r15,__LC_SAVE_AREA_SYNC
lpswe __LC_PGM_OLD_PSW
1: lpswe disabled_wait_psw-0b(%r13)
@ -117,7 +121,7 @@ ENTRY(diag308_reset)
larl %r4,.Lcontinue_psw # Restore PSW flags
lpswe 0(%r4)
.Lcontinue:
br %r14
BR_EX %r14
.align 16
.Lrestart_psw:
.long 0x00080000,0x80000000 + .Lrestart_part2

View File

@ -28,6 +28,7 @@
#include <asm/setup.h>
#include <asm/nmi.h>
#include <asm/export.h>
#include <asm/nospec-insn.h>
__PT_R0 = __PT_GPRS
__PT_R1 = __PT_GPRS + 8
@ -183,67 +184,9 @@ _LPP_OFFSET = __LC_LPP
"jnz .+8; .long 0xb2e8d000", 82
.endm
#ifdef CONFIG_EXPOLINE
.macro GEN_BR_THUNK name,reg,tmp
.section .text.\name,"axG",@progbits,\name,comdat
.globl \name
.hidden \name
.type \name,@function
\name:
CFI_STARTPROC
#ifdef CONFIG_HAVE_MARCH_Z10_FEATURES
exrl 0,0f
#else
larl \tmp,0f
ex 0,0(\tmp)
#endif
j .
0: br \reg
CFI_ENDPROC
.endm
GEN_BR_THUNK __s390x_indirect_jump_r1use_r9,%r9,%r1
GEN_BR_THUNK __s390x_indirect_jump_r1use_r14,%r14,%r1
GEN_BR_THUNK __s390x_indirect_jump_r11use_r14,%r14,%r11
.macro BASR_R14_R9
0: brasl %r14,__s390x_indirect_jump_r1use_r9
.pushsection .s390_indirect_branches,"a",@progbits
.long 0b-.
.popsection
.endm
.macro BR_R1USE_R14
0: jg __s390x_indirect_jump_r1use_r14
.pushsection .s390_indirect_branches,"a",@progbits
.long 0b-.
.popsection
.endm
.macro BR_R11USE_R14
0: jg __s390x_indirect_jump_r11use_r14
.pushsection .s390_indirect_branches,"a",@progbits
.long 0b-.
.popsection
.endm
#else /* CONFIG_EXPOLINE */
.macro BASR_R14_R9
basr %r14,%r9
.endm
.macro BR_R1USE_R14
br %r14
.endm
.macro BR_R11USE_R14
br %r14
.endm
#endif /* CONFIG_EXPOLINE */
GEN_BR_THUNK %r9
GEN_BR_THUNK %r14
GEN_BR_THUNK %r14,%r11
.section .kprobes.text, "ax"
.Ldummy:
@ -260,7 +203,7 @@ _LPP_OFFSET = __LC_LPP
ENTRY(__bpon)
.globl __bpon
BPON
BR_R1USE_R14
BR_EX %r14
/*
* Scheduler resume function, called by switch_to
@ -284,7 +227,7 @@ ENTRY(__switch_to)
mvc __LC_CURRENT_PID(4,%r0),0(%r3) # store pid of next
lmg %r6,%r15,__SF_GPRS(%r15) # load gprs of next task
ALTERNATIVE "", ".insn s,0xb2800000,_LPP_OFFSET", 40
BR_R1USE_R14
BR_EX %r14
.L__critical_start:
@ -351,7 +294,7 @@ sie_exit:
xgr %r5,%r5
lmg %r6,%r14,__SF_GPRS(%r15) # restore kernel registers
lg %r2,__SF_SIE_REASON(%r15) # return exit reason code
BR_R1USE_R14
BR_EX %r14
.Lsie_fault:
lghi %r14,-EFAULT
stg %r14,__SF_SIE_REASON(%r15) # set exit reason code
@ -410,7 +353,7 @@ ENTRY(system_call)
lgf %r9,0(%r8,%r10) # get system call add.
TSTMSK __TI_flags(%r12),_TIF_TRACE
jnz .Lsysc_tracesys
BASR_R14_R9 # call sys_xxxx
BASR_EX %r14,%r9 # call sys_xxxx
stg %r2,__PT_R2(%r11) # store return value
.Lsysc_return:
@ -595,7 +538,7 @@ ENTRY(system_call)
lmg %r3,%r7,__PT_R3(%r11)
stg %r7,STACK_FRAME_OVERHEAD(%r15)
lg %r2,__PT_ORIG_GPR2(%r11)
BASR_R14_R9 # call sys_xxx
BASR_EX %r14,%r9 # call sys_xxx
stg %r2,__PT_R2(%r11) # store return value
.Lsysc_tracenogo:
TSTMSK __TI_flags(%r12),_TIF_TRACE
@ -619,7 +562,7 @@ ENTRY(ret_from_fork)
lmg %r9,%r10,__PT_R9(%r11) # load gprs
ENTRY(kernel_thread_starter)
la %r2,0(%r10)
BASR_R14_R9
BASR_EX %r14,%r9
j .Lsysc_tracenogo
/*
@ -701,7 +644,7 @@ ENTRY(pgm_check_handler)
je .Lpgm_return
lgf %r9,0(%r10,%r1) # load address of handler routine
lgr %r2,%r11 # pass pointer to pt_regs
BASR_R14_R9 # branch to interrupt-handler
BASR_EX %r14,%r9 # branch to interrupt-handler
.Lpgm_return:
LOCKDEP_SYS_EXIT
tm __PT_PSW+1(%r11),0x01 # returning to user ?
@ -1019,7 +962,7 @@ ENTRY(psw_idle)
stpt __TIMER_IDLE_ENTER(%r2)
.Lpsw_idle_lpsw:
lpswe __SF_EMPTY(%r15)
BR_R1USE_R14
BR_EX %r14
.Lpsw_idle_end:
/*
@ -1061,7 +1004,7 @@ ENTRY(save_fpu_regs)
.Lsave_fpu_regs_done:
oi __LC_CPU_FLAGS+7,_CIF_FPU
.Lsave_fpu_regs_exit:
BR_R1USE_R14
BR_EX %r14
.Lsave_fpu_regs_end:
EXPORT_SYMBOL(save_fpu_regs)
@ -1107,7 +1050,7 @@ load_fpu_regs:
.Lload_fpu_regs_done:
ni __LC_CPU_FLAGS+7,255-_CIF_FPU
.Lload_fpu_regs_exit:
BR_R1USE_R14
BR_EX %r14
.Lload_fpu_regs_end:
.L__critical_end:
@ -1322,7 +1265,7 @@ cleanup_critical:
jl 0f
clg %r9,BASED(.Lcleanup_table+104) # .Lload_fpu_regs_end
jl .Lcleanup_load_fpu_regs
0: BR_R11USE_R14
0: BR_EX %r14
.align 8
.Lcleanup_table:
@ -1358,7 +1301,7 @@ cleanup_critical:
ni __SIE_PROG0C+3(%r9),0xfe # no longer in SIE
lctlg %c1,%c1,__LC_USER_ASCE # load primary asce
larl %r9,sie_exit # skip forward to sie_exit
BR_R11USE_R14
BR_EX %r14
#endif
.Lcleanup_system_call:
@ -1412,7 +1355,7 @@ cleanup_critical:
stg %r15,56(%r11) # r15 stack pointer
# set new psw address and exit
larl %r9,.Lsysc_do_svc
BR_R11USE_R14
BR_EX %r14,%r11
.Lcleanup_system_call_insn:
.quad system_call
.quad .Lsysc_stmg
@ -1424,7 +1367,7 @@ cleanup_critical:
.Lcleanup_sysc_tif:
larl %r9,.Lsysc_tif
BR_R11USE_R14
BR_EX %r14,%r11
.Lcleanup_sysc_restore:
# check if stpt has been executed
@ -1441,14 +1384,14 @@ cleanup_critical:
mvc 0(64,%r11),__PT_R8(%r9)
lmg %r0,%r7,__PT_R0(%r9)
1: lmg %r8,%r9,__LC_RETURN_PSW
BR_R11USE_R14
BR_EX %r14,%r11
.Lcleanup_sysc_restore_insn:
.quad .Lsysc_exit_timer
.quad .Lsysc_done - 4
.Lcleanup_io_tif:
larl %r9,.Lio_tif
BR_R11USE_R14
BR_EX %r14,%r11
.Lcleanup_io_restore:
# check if stpt has been executed
@ -1462,7 +1405,7 @@ cleanup_critical:
mvc 0(64,%r11),__PT_R8(%r9)
lmg %r0,%r7,__PT_R0(%r9)
1: lmg %r8,%r9,__LC_RETURN_PSW
BR_R11USE_R14
BR_EX %r14,%r11
.Lcleanup_io_restore_insn:
.quad .Lio_exit_timer
.quad .Lio_done - 4
@ -1515,17 +1458,17 @@ cleanup_critical:
# prepare return psw
nihh %r8,0xfcfd # clear irq & wait state bits
lg %r9,48(%r11) # return from psw_idle
BR_R11USE_R14
BR_EX %r14,%r11
.Lcleanup_idle_insn:
.quad .Lpsw_idle_lpsw
.Lcleanup_save_fpu_regs:
larl %r9,save_fpu_regs
BR_R11USE_R14
BR_EX %r14,%r11
.Lcleanup_load_fpu_regs:
larl %r9,load_fpu_regs
BR_R11USE_R14
BR_EX %r14,%r11
/*
* Integer constants

View File

@ -176,10 +176,9 @@ void do_softirq_own_stack(void)
new -= STACK_FRAME_OVERHEAD;
((struct stack_frame *) new)->back_chain = old;
asm volatile(" la 15,0(%0)\n"
" basr 14,%2\n"
" brasl 14,__do_softirq\n"
" la 15,0(%1)\n"
: : "a" (new), "a" (old),
"a" (__do_softirq)
: : "a" (new), "a" (old)
: "0", "1", "2", "3", "4", "5", "14",
"cc", "memory" );
} else {

View File

@ -9,13 +9,17 @@
#include <linux/linkage.h>
#include <asm/asm-offsets.h>
#include <asm/ftrace.h>
#include <asm/nospec-insn.h>
#include <asm/ptrace.h>
#include <asm/export.h>
GEN_BR_THUNK %r1
GEN_BR_THUNK %r14
.section .kprobes.text, "ax"
ENTRY(ftrace_stub)
br %r14
BR_EX %r14
#define STACK_FRAME_SIZE (STACK_FRAME_OVERHEAD + __PT_SIZE)
#define STACK_PTREGS (STACK_FRAME_OVERHEAD)
@ -23,7 +27,7 @@ ENTRY(ftrace_stub)
#define STACK_PTREGS_PSW (STACK_PTREGS + __PT_PSW)
ENTRY(_mcount)
br %r14
BR_EX %r14
EXPORT_SYMBOL(_mcount)
@ -53,7 +57,7 @@ ENTRY(ftrace_caller)
#endif
lgr %r3,%r14
la %r5,STACK_PTREGS(%r15)
basr %r14,%r1
BASR_EX %r14,%r1
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
# The j instruction gets runtime patched to a nop instruction.
# See ftrace_enable_ftrace_graph_caller.
@ -68,7 +72,7 @@ ftrace_graph_caller_end:
#endif
lg %r1,(STACK_PTREGS_PSW+8)(%r15)
lmg %r2,%r15,(STACK_PTREGS_GPRS+2*8)(%r15)
br %r1
BR_EX %r1
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
@ -81,6 +85,6 @@ ENTRY(return_to_handler)
aghi %r15,STACK_FRAME_OVERHEAD
lgr %r14,%r2
lmg %r2,%r5,32(%r15)
br %r14
BR_EX %r14
#endif

View File

@ -1,7 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
#include <linux/module.h>
#include <linux/device.h>
#include <linux/cpu.h>
#include <asm/nospec-branch.h>
static int __init nobp_setup_early(char *str)
@ -44,24 +43,6 @@ static int __init nospec_report(void)
}
arch_initcall(nospec_report);
#ifdef CONFIG_SYSFS
ssize_t cpu_show_spectre_v1(struct device *dev,
struct device_attribute *attr, char *buf)
{
return sprintf(buf, "Mitigation: __user pointer sanitization\n");
}
ssize_t cpu_show_spectre_v2(struct device *dev,
struct device_attribute *attr, char *buf)
{
if (IS_ENABLED(CC_USING_EXPOLINE) && !nospec_disable)
return sprintf(buf, "Mitigation: execute trampolines\n");
if (__test_facility(82, S390_lowcore.alt_stfle_fac_list))
return sprintf(buf, "Mitigation: limited branch prediction.\n");
return sprintf(buf, "Vulnerable\n");
}
#endif
#ifdef CONFIG_EXPOLINE
int nospec_disable = IS_ENABLED(CONFIG_EXPOLINE_OFF);
@ -112,7 +93,6 @@ static void __init_or_module __nospec_revert(s32 *start, s32 *end)
s32 *epo;
/* Second part of the instruction replace is always a nop */
memcpy(insnbuf + 2, (char[]) { 0x47, 0x00, 0x00, 0x00 }, 4);
for (epo = start; epo < end; epo++) {
instr = (u8 *) epo + *epo;
if (instr[0] == 0xc0 && (instr[1] & 0x0f) == 0x04)
@ -133,18 +113,34 @@ static void __init_or_module __nospec_revert(s32 *start, s32 *end)
br = thunk + (*(int *)(thunk + 2)) * 2;
else
continue;
if (br[0] != 0x07 || (br[1] & 0xf0) != 0xf0)
/* Check for unconditional branch 0x07f? or 0x47f???? */
if ((br[0] & 0xbf) != 0x07 || (br[1] & 0xf0) != 0xf0)
continue;
memcpy(insnbuf + 2, (char[]) { 0x47, 0x00, 0x07, 0x00 }, 4);
switch (type) {
case BRCL_EXPOLINE:
/* brcl to thunk, replace with br + nop */
insnbuf[0] = br[0];
insnbuf[1] = (instr[1] & 0xf0) | (br[1] & 0x0f);
if (br[0] == 0x47) {
/* brcl to b, replace with bc + nopr */
insnbuf[2] = br[2];
insnbuf[3] = br[3];
} else {
/* brcl to br, replace with bcr + nop */
}
break;
case BRASL_EXPOLINE:
/* brasl to thunk, replace with basr + nop */
insnbuf[0] = 0x0d;
insnbuf[1] = (instr[1] & 0xf0) | (br[1] & 0x0f);
if (br[0] == 0x47) {
/* brasl to b, replace with bas + nopr */
insnbuf[0] = 0x4d;
insnbuf[2] = br[2];
insnbuf[3] = br[3];
} else {
/* brasl to br, replace with basr + nop */
insnbuf[0] = 0x0d;
}
break;
}

View File

@ -0,0 +1,21 @@
// SPDX-License-Identifier: GPL-2.0
#include <linux/device.h>
#include <linux/cpu.h>
#include <asm/facility.h>
#include <asm/nospec-branch.h>
ssize_t cpu_show_spectre_v1(struct device *dev,
struct device_attribute *attr, char *buf)
{
return sprintf(buf, "Mitigation: __user pointer sanitization\n");
}
ssize_t cpu_show_spectre_v2(struct device *dev,
struct device_attribute *attr, char *buf)
{
if (IS_ENABLED(CC_USING_EXPOLINE) && !nospec_disable)
return sprintf(buf, "Mitigation: execute trampolines\n");
if (__test_facility(82, S390_lowcore.alt_stfle_fac_list))
return sprintf(buf, "Mitigation: limited branch prediction\n");
return sprintf(buf, "Vulnerable\n");
}

View File

@ -753,6 +753,10 @@ static int __hw_perf_event_init(struct perf_event *event)
*/
rate = 0;
if (attr->freq) {
if (!attr->sample_freq) {
err = -EINVAL;
goto out;
}
rate = freq_to_sample_rate(&si, attr->sample_freq);
rate = hw_limit_rate(&si, rate);
attr->freq = 0;

View File

@ -7,8 +7,11 @@
#include <linux/linkage.h>
#include <asm/asm-offsets.h>
#include <asm/nospec-insn.h>
#include <asm/sigp.h>
GEN_BR_THUNK %r9
#
# Issue "store status" for the current CPU to its prefix page
# and call passed function afterwards
@ -67,9 +70,9 @@ ENTRY(store_status)
st %r4,0(%r1)
st %r5,4(%r1)
stg %r2,8(%r1)
lgr %r1,%r2
lgr %r9,%r2
lgr %r2,%r3
br %r1
BR_EX %r9
.section .bss
.align 8

View File

@ -13,6 +13,7 @@
#include <asm/ptrace.h>
#include <asm/thread_info.h>
#include <asm/asm-offsets.h>
#include <asm/nospec-insn.h>
#include <asm/sigp.h>
/*
@ -24,6 +25,8 @@
* (see below) in the resume process.
* This function runs with disabled interrupts.
*/
GEN_BR_THUNK %r14
.section .text
ENTRY(swsusp_arch_suspend)
stmg %r6,%r15,__SF_GPRS(%r15)
@ -103,7 +106,7 @@ ENTRY(swsusp_arch_suspend)
spx 0x318(%r1)
lmg %r6,%r15,STACK_FRAME_OVERHEAD + __SF_GPRS(%r15)
lghi %r2,0
br %r14
BR_EX %r14
/*
* Restore saved memory image to correct place and restore register context.
@ -197,11 +200,10 @@ pgm_check_entry:
larl %r15,init_thread_union
ahi %r15,1<<(PAGE_SHIFT+THREAD_SIZE_ORDER)
larl %r2,.Lpanic_string
larl %r3,sclp_early_printk
lghi %r1,0
sam31
sigp %r1,%r0,SIGP_SET_ARCHITECTURE
basr %r14,%r3
brasl %r14,sclp_early_printk
larl %r3,.Ldisabled_wait_31
lpsw 0(%r3)
4:
@ -267,7 +269,7 @@ restore_registers:
/* Return 0 */
lmg %r6,%r15,STACK_FRAME_OVERHEAD + __SF_GPRS(%r15)
lghi %r2,0
br %r14
BR_EX %r14
.section .data..nosave,"aw",@progbits
.align 8

View File

@ -7,6 +7,9 @@
#include <linux/linkage.h>
#include <asm/export.h>
#include <asm/nospec-insn.h>
GEN_BR_THUNK %r14
/*
* void *memmove(void *dest, const void *src, size_t n)
@ -33,14 +36,14 @@ ENTRY(memmove)
.Lmemmove_forward_remainder:
larl %r5,.Lmemmove_mvc
ex %r4,0(%r5)
br %r14
BR_EX %r14
.Lmemmove_reverse:
ic %r0,0(%r4,%r3)
stc %r0,0(%r4,%r1)
brctg %r4,.Lmemmove_reverse
ic %r0,0(%r4,%r3)
stc %r0,0(%r4,%r1)
br %r14
BR_EX %r14
.Lmemmove_mvc:
mvc 0(1,%r1),0(%r3)
EXPORT_SYMBOL(memmove)
@ -77,7 +80,7 @@ ENTRY(memset)
.Lmemset_clear_remainder:
larl %r3,.Lmemset_xc
ex %r4,0(%r3)
br %r14
BR_EX %r14
.Lmemset_fill:
cghi %r4,1
lgr %r1,%r2
@ -95,10 +98,10 @@ ENTRY(memset)
stc %r3,0(%r1)
larl %r5,.Lmemset_mvc
ex %r4,0(%r5)
br %r14
BR_EX %r14
.Lmemset_fill_exit:
stc %r3,0(%r1)
br %r14
BR_EX %r14
.Lmemset_xc:
xc 0(1,%r1),0(%r1)
.Lmemset_mvc:
@ -121,7 +124,7 @@ ENTRY(memcpy)
.Lmemcpy_remainder:
larl %r5,.Lmemcpy_mvc
ex %r4,0(%r5)
br %r14
BR_EX %r14
.Lmemcpy_loop:
mvc 0(256,%r1),0(%r3)
la %r1,256(%r1)
@ -159,10 +162,10 @@ ENTRY(__memset\bits)
\insn %r3,0(%r1)
larl %r5,.L__memset_mvc\bits
ex %r4,0(%r5)
br %r14
BR_EX %r14
.L__memset_exit\bits:
\insn %r3,0(%r2)
br %r14
BR_EX %r14
.L__memset_mvc\bits:
mvc \bytes(1,%r1),0(%r1)
.endm

View File

@ -25,6 +25,8 @@
#include <linux/bpf.h>
#include <asm/cacheflush.h>
#include <asm/dis.h>
#include <asm/facility.h>
#include <asm/nospec-branch.h>
#include <asm/set_memory.h>
#include "bpf_jit.h"
@ -41,6 +43,8 @@ struct bpf_jit {
int base_ip; /* Base address for literal pool */
int ret0_ip; /* Address of return 0 */
int exit_ip; /* Address of exit */
int r1_thunk_ip; /* Address of expoline thunk for 'br %r1' */
int r14_thunk_ip; /* Address of expoline thunk for 'br %r14' */
int tail_call_start; /* Tail call start offset */
int labels[1]; /* Labels for local jumps */
};
@ -246,6 +250,19 @@ static inline void reg_set_seen(struct bpf_jit *jit, u32 b1)
REG_SET_SEEN(b2); \
})
#define EMIT6_PCREL_RILB(op, b, target) \
({ \
int rel = (target - jit->prg) / 2; \
_EMIT6(op | reg_high(b) << 16 | rel >> 16, rel & 0xffff); \
REG_SET_SEEN(b); \
})
#define EMIT6_PCREL_RIL(op, target) \
({ \
int rel = (target - jit->prg) / 2; \
_EMIT6(op | rel >> 16, rel & 0xffff); \
})
#define _EMIT6_IMM(op, imm) \
({ \
unsigned int __imm = (imm); \
@ -438,8 +455,45 @@ static void bpf_jit_epilogue(struct bpf_jit *jit, u32 stack_depth)
EMIT4(0xb9040000, REG_2, BPF_REG_0);
/* Restore registers */
save_restore_regs(jit, REGS_RESTORE, stack_depth);
if (IS_ENABLED(CC_USING_EXPOLINE) && !nospec_disable) {
jit->r14_thunk_ip = jit->prg;
/* Generate __s390_indirect_jump_r14 thunk */
if (test_facility(35)) {
/* exrl %r0,.+10 */
EMIT6_PCREL_RIL(0xc6000000, jit->prg + 10);
} else {
/* larl %r1,.+14 */
EMIT6_PCREL_RILB(0xc0000000, REG_1, jit->prg + 14);
/* ex 0,0(%r1) */
EMIT4_DISP(0x44000000, REG_0, REG_1, 0);
}
/* j . */
EMIT4_PCREL(0xa7f40000, 0);
}
/* br %r14 */
_EMIT2(0x07fe);
if (IS_ENABLED(CC_USING_EXPOLINE) && !nospec_disable &&
(jit->seen & SEEN_FUNC)) {
jit->r1_thunk_ip = jit->prg;
/* Generate __s390_indirect_jump_r1 thunk */
if (test_facility(35)) {
/* exrl %r0,.+10 */
EMIT6_PCREL_RIL(0xc6000000, jit->prg + 10);
/* j . */
EMIT4_PCREL(0xa7f40000, 0);
/* br %r1 */
_EMIT2(0x07f1);
} else {
/* larl %r1,.+14 */
EMIT6_PCREL_RILB(0xc0000000, REG_1, jit->prg + 14);
/* ex 0,S390_lowcore.br_r1_tampoline */
EMIT4_DISP(0x44000000, REG_0, REG_0,
offsetof(struct lowcore, br_r1_trampoline));
/* j . */
EMIT4_PCREL(0xa7f40000, 0);
}
}
}
/*
@ -935,8 +989,13 @@ static noinline int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp, int i
/* lg %w1,<d(imm)>(%l) */
EMIT6_DISP_LH(0xe3000000, 0x0004, REG_W1, REG_0, REG_L,
EMIT_CONST_U64(func));
/* basr %r14,%w1 */
EMIT2(0x0d00, REG_14, REG_W1);
if (IS_ENABLED(CC_USING_EXPOLINE) && !nospec_disable) {
/* brasl %r14,__s390_indirect_jump_r1 */
EMIT6_PCREL_RILB(0xc0050000, REG_14, jit->r1_thunk_ip);
} else {
/* basr %r14,%w1 */
EMIT2(0x0d00, REG_14, REG_W1);
}
/* lgr %b0,%r2: load return value into %b0 */
EMIT4(0xb9040000, BPF_REG_0, REG_2);
break;

View File

@ -163,7 +163,8 @@ __setup_efi_pci32(efi_pci_io_protocol_32 *pci, struct pci_setup_rom **__rom)
if (status != EFI_SUCCESS)
goto free_struct;
memcpy(rom->romdata, pci->romimage, pci->romsize);
memcpy(rom->romdata, (void *)(unsigned long)pci->romimage,
pci->romsize);
return status;
free_struct:
@ -269,7 +270,8 @@ __setup_efi_pci64(efi_pci_io_protocol_64 *pci, struct pci_setup_rom **__rom)
if (status != EFI_SUCCESS)
goto free_struct;
memcpy(rom->romdata, pci->romimage, pci->romsize);
memcpy(rom->romdata, (void *)(unsigned long)pci->romimage,
pci->romsize);
return status;
free_struct:

View File

@ -305,6 +305,25 @@ ENTRY(startup_64)
/* Set up the stack */
leaq boot_stack_end(%rbx), %rsp
/*
* paging_prepare() and cleanup_trampoline() below can have GOT
* references. Adjust the table with address we are running at.
*
* Zero RAX for adjust_got: the GOT was not adjusted before;
* there's no adjustment to undo.
*/
xorq %rax, %rax
/*
* Calculate the address the binary is loaded at and use it as
* a GOT adjustment.
*/
call 1f
1: popq %rdi
subq $1b, %rdi
call adjust_got
/*
* At this point we are in long mode with 4-level paging enabled,
* but we might want to enable 5-level paging or vice versa.
@ -370,10 +389,14 @@ trampoline_return:
/*
* cleanup_trampoline() would restore trampoline memory.
*
* RDI is address of the page table to use instead of page table
* in trampoline memory (if required).
*
* RSI holds real mode data and needs to be preserved across
* this function call.
*/
pushq %rsi
leaq top_pgtable(%rbx), %rdi
call cleanup_trampoline
popq %rsi
@ -381,6 +404,21 @@ trampoline_return:
pushq $0
popfq
/*
* Previously we've adjusted the GOT with address the binary was
* loaded at. Now we need to re-adjust for relocation address.
*
* Calculate the address the binary is loaded at, so that we can
* undo the previous GOT adjustment.
*/
call 1f
1: popq %rax
subq $1b, %rax
/* The new adjustment is the relocation address */
movq %rbx, %rdi
call adjust_got
/*
* Copy the compressed kernel to the end of our buffer
* where decompression in place becomes safe.
@ -481,19 +519,6 @@ relocated:
shrq $3, %rcx
rep stosq
/*
* Adjust our own GOT
*/
leaq _got(%rip), %rdx
leaq _egot(%rip), %rcx
1:
cmpq %rcx, %rdx
jae 2f
addq %rbx, (%rdx)
addq $8, %rdx
jmp 1b
2:
/*
* Do the extraction, and jump to the new kernel..
*/
@ -512,6 +537,27 @@ relocated:
*/
jmp *%rax
/*
* Adjust the global offset table
*
* RAX is the previous adjustment of the table to undo (use 0 if it's the
* first time we touch GOT).
* RDI is the new adjustment to apply.
*/
adjust_got:
/* Walk through the GOT adding the address to the entries */
leaq _got(%rip), %rdx
leaq _egot(%rip), %rcx
1:
cmpq %rcx, %rdx
jae 2f
subq %rax, (%rdx) /* Undo previous adjustment */
addq %rdi, (%rdx) /* Apply the new adjustment */
addq $8, %rdx
jmp 1b
2:
ret
.code32
/*
* This is the 32-bit trampoline that will be copied over to low memory.
@ -649,3 +695,10 @@ boot_stack_end:
.balign 4096
pgtable:
.fill BOOT_PGT_SIZE, 1, 0
/*
* The page table is going to be used instead of page table in the trampoline
* memory.
*/
top_pgtable:
.fill PAGE_SIZE, 1, 0

View File

@ -22,14 +22,6 @@ struct paging_config {
/* Buffer to preserve trampoline memory */
static char trampoline_save[TRAMPOLINE_32BIT_SIZE];
/*
* The page table is going to be used instead of page table in the trampoline
* memory.
*
* It must not be in BSS as BSS is cleared after cleanup_trampoline().
*/
static char top_pgtable[PAGE_SIZE] __aligned(PAGE_SIZE) __section(.data);
/*
* Trampoline address will be printed by extract_kernel() for debugging
* purposes.
@ -134,7 +126,7 @@ out:
return paging_config;
}
void cleanup_trampoline(void)
void cleanup_trampoline(void *pgtable)
{
void *trampoline_pgtable;
@ -145,8 +137,8 @@ void cleanup_trampoline(void)
* if it's there.
*/
if ((void *)__native_read_cr3() == trampoline_pgtable) {
memcpy(top_pgtable, trampoline_pgtable, PAGE_SIZE);
native_write_cr3((unsigned long)top_pgtable);
memcpy(pgtable, trampoline_pgtable, PAGE_SIZE);
native_write_cr3((unsigned long)pgtable);
}
/* Restore trampoline memory */

View File

@ -1 +0,0 @@
#include "../vdso-fakesections.c"

View File

@ -27,6 +27,7 @@
#include <linux/cpu.h>
#include <linux/bitops.h>
#include <linux/device.h>
#include <linux/nospec.h>
#include <asm/apic.h>
#include <asm/stacktrace.h>
@ -304,17 +305,20 @@ set_ext_hw_attr(struct hw_perf_event *hwc, struct perf_event *event)
config = attr->config;
cache_type = (config >> 0) & 0xff;
cache_type = (config >> 0) & 0xff;
if (cache_type >= PERF_COUNT_HW_CACHE_MAX)
return -EINVAL;
cache_type = array_index_nospec(cache_type, PERF_COUNT_HW_CACHE_MAX);
cache_op = (config >> 8) & 0xff;
if (cache_op >= PERF_COUNT_HW_CACHE_OP_MAX)
return -EINVAL;
cache_op = array_index_nospec(cache_op, PERF_COUNT_HW_CACHE_OP_MAX);
cache_result = (config >> 16) & 0xff;
if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
return -EINVAL;
cache_result = array_index_nospec(cache_result, PERF_COUNT_HW_CACHE_RESULT_MAX);
val = hw_cache_event_ids[cache_type][cache_op][cache_result];
@ -421,6 +425,8 @@ int x86_setup_perfctr(struct perf_event *event)
if (attr->config >= x86_pmu.max_events)
return -EINVAL;
attr->config = array_index_nospec((unsigned long)attr->config, x86_pmu.max_events);
/*
* The generic map:
*/

View File

@ -92,6 +92,7 @@
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/perf_event.h>
#include <linux/nospec.h>
#include <asm/cpu_device_id.h>
#include <asm/intel-family.h>
#include "../perf_event.h"
@ -302,6 +303,7 @@ static int cstate_pmu_event_init(struct perf_event *event)
} else if (event->pmu == &cstate_pkg_pmu) {
if (cfg >= PERF_CSTATE_PKG_EVENT_MAX)
return -EINVAL;
cfg = array_index_nospec((unsigned long)cfg, PERF_CSTATE_PKG_EVENT_MAX);
if (!pkg_msr[cfg].attr)
return -EINVAL;
event->hw.event_base = pkg_msr[cfg].msr;

View File

@ -1,5 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
#include <linux/perf_event.h>
#include <linux/nospec.h>
#include <asm/intel-family.h>
enum perf_msr_id {
@ -158,9 +159,6 @@ static int msr_event_init(struct perf_event *event)
if (event->attr.type != event->pmu->type)
return -ENOENT;
if (cfg >= PERF_MSR_EVENT_MAX)
return -EINVAL;
/* unsupported modes and filters */
if (event->attr.exclude_user ||
event->attr.exclude_kernel ||
@ -171,6 +169,11 @@ static int msr_event_init(struct perf_event *event)
event->attr.sample_period) /* no sampling */
return -EINVAL;
if (cfg >= PERF_MSR_EVENT_MAX)
return -EINVAL;
cfg = array_index_nospec((unsigned long)cfg, PERF_MSR_EVENT_MAX);
if (!msr[cfg].attr)
return -EINVAL;

View File

@ -140,6 +140,20 @@ extern void clear_cpu_cap(struct cpuinfo_x86 *c, unsigned int bit);
#define setup_force_cpu_bug(bit) setup_force_cpu_cap(bit)
#if defined(__clang__) && !defined(CC_HAVE_ASM_GOTO)
/*
* Workaround for the sake of BPF compilation which utilizes kernel
* headers, but clang does not support ASM GOTO and fails the build.
*/
#ifndef __BPF_TRACING__
#warning "Compiler lacks ASM_GOTO support. Add -D __BPF_TRACING__ to your compiler arguments"
#endif
#define static_cpu_has(bit) boot_cpu_has(bit)
#else
/*
* Static testing of CPU features. Used the same as boot_cpu_has().
* These will statically patch the target code for additional
@ -195,6 +209,7 @@ t_no:
boot_cpu_has(bit) : \
_static_cpu_has(bit) \
)
#endif
#define cpu_has_bug(c, bit) cpu_has(c, (bit))
#define set_cpu_bug(c, bit) set_cpu_cap(c, (bit))

View File

@ -208,4 +208,22 @@ static inline int insn_offset_immediate(struct insn *insn)
return insn_offset_displacement(insn) + insn->displacement.nbytes;
}
#define POP_SS_OPCODE 0x1f
#define MOV_SREG_OPCODE 0x8e
/*
* Intel SDM Vol.3A 6.8.3 states;
* "Any single-step trap that would be delivered following the MOV to SS
* instruction or POP to SS instruction (because EFLAGS.TF is 1) is
* suppressed."
* This function returns true if @insn is MOV SS or POP SS. On these
* instructions, single stepping is suppressed.
*/
static inline int insn_masking_exception(struct insn *insn)
{
return insn->opcode.bytes[0] == POP_SS_OPCODE ||
(insn->opcode.bytes[0] == MOV_SREG_OPCODE &&
X86_MODRM_REG(insn->modrm.bytes[0]) == 2);
}
#endif /* _ASM_X86_INSN_H */

View File

@ -193,7 +193,7 @@ static inline int init_new_context(struct task_struct *tsk,
#ifdef CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS
if (cpu_feature_enabled(X86_FEATURE_OSPKE)) {
/* pkey 0 is the default and always allocated */
/* pkey 0 is the default and allocated implicitly */
mm->context.pkey_allocation_map = 0x1;
/* -1 means unallocated or invalid */
mm->context.execute_only_pkey = -1;

View File

@ -2,6 +2,8 @@
#ifndef _ASM_X86_PKEYS_H
#define _ASM_X86_PKEYS_H
#define ARCH_DEFAULT_PKEY 0
#define arch_max_pkey() (boot_cpu_has(X86_FEATURE_OSPKE) ? 16 : 1)
extern int arch_set_user_pkey_access(struct task_struct *tsk, int pkey,
@ -15,7 +17,7 @@ extern int __execute_only_pkey(struct mm_struct *mm);
static inline int execute_only_pkey(struct mm_struct *mm)
{
if (!boot_cpu_has(X86_FEATURE_OSPKE))
return 0;
return ARCH_DEFAULT_PKEY;
return __execute_only_pkey(mm);
}
@ -49,13 +51,21 @@ bool mm_pkey_is_allocated(struct mm_struct *mm, int pkey)
{
/*
* "Allocated" pkeys are those that have been returned
* from pkey_alloc(). pkey 0 is special, and never
* returned from pkey_alloc().
* from pkey_alloc() or pkey 0 which is allocated
* implicitly when the mm is created.
*/
if (pkey <= 0)
if (pkey < 0)
return false;
if (pkey >= arch_max_pkey())
return false;
/*
* The exec-only pkey is set in the allocation map, but
* is not available to any of the user interfaces like
* mprotect_pkey().
*/
if (pkey == mm->context.execute_only_pkey)
return false;
return mm_pkey_allocation_map(mm) & (1U << pkey);
}

View File

@ -29,7 +29,7 @@
#define KVM_FEATURE_PV_TLB_FLUSH 9
#define KVM_FEATURE_ASYNC_PF_VMEXIT 10
#define KVM_HINTS_DEDICATED 0
#define KVM_HINTS_REALTIME 0
/* The last 8 bits are used to indicate how to interpret the flags field
* in pvclock structure. If no bits are set, all flags are ignored.

View File

@ -14,8 +14,11 @@
#include <asm/amd_nb.h>
#define PCI_DEVICE_ID_AMD_17H_ROOT 0x1450
#define PCI_DEVICE_ID_AMD_17H_M10H_ROOT 0x15d0
#define PCI_DEVICE_ID_AMD_17H_DF_F3 0x1463
#define PCI_DEVICE_ID_AMD_17H_DF_F4 0x1464
#define PCI_DEVICE_ID_AMD_17H_M10H_DF_F3 0x15eb
#define PCI_DEVICE_ID_AMD_17H_M10H_DF_F4 0x15ec
/* Protect the PCI config register pairs used for SMN and DF indirect access. */
static DEFINE_MUTEX(smn_mutex);
@ -24,6 +27,7 @@ static u32 *flush_words;
static const struct pci_device_id amd_root_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_ROOT) },
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_M10H_ROOT) },
{}
};
@ -39,6 +43,7 @@ const struct pci_device_id amd_nb_misc_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_16H_NB_F3) },
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_16H_M30H_NB_F3) },
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_DF_F3) },
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_M10H_DF_F3) },
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CNB17H_F3) },
{}
};
@ -51,6 +56,7 @@ static const struct pci_device_id amd_nb_link_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_16H_NB_F4) },
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_16H_M30H_NB_F4) },
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_DF_F4) },
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_M10H_DF_F4) },
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CNB17H_F4) },
{}
};

View File

@ -116,6 +116,7 @@ static void init_x2apic_ldr(void)
goto update;
}
cmsk = cluster_hotplug_mask;
cmsk->clusterid = cluster;
cluster_hotplug_mask = NULL;
update:
this_cpu_write(cluster_masks, cmsk);

View File

@ -94,6 +94,11 @@ static struct smca_bank_name smca_names[] = {
[SMCA_SMU] = { "smu", "System Management Unit" },
};
static u32 smca_bank_addrs[MAX_NR_BANKS][NR_BLOCKS] __ro_after_init =
{
[0 ... MAX_NR_BANKS - 1] = { [0 ... NR_BLOCKS - 1] = -1 }
};
const char *smca_get_name(enum smca_bank_types t)
{
if (t >= N_SMCA_BANK_TYPES)
@ -443,20 +448,26 @@ static u32 smca_get_block_address(unsigned int cpu, unsigned int bank,
if (!block)
return MSR_AMD64_SMCA_MCx_MISC(bank);
/* Check our cache first: */
if (smca_bank_addrs[bank][block] != -1)
return smca_bank_addrs[bank][block];
/*
* For SMCA enabled processors, BLKPTR field of the first MISC register
* (MCx_MISC0) indicates presence of additional MISC regs set (MISC1-4).
*/
if (rdmsr_safe_on_cpu(cpu, MSR_AMD64_SMCA_MCx_CONFIG(bank), &low, &high))
return addr;
goto out;
if (!(low & MCI_CONFIG_MCAX))
return addr;
goto out;
if (!rdmsr_safe_on_cpu(cpu, MSR_AMD64_SMCA_MCx_MISC(bank), &low, &high) &&
(low & MASK_BLKPTR_LO))
return MSR_AMD64_SMCA_MCx_MISCy(bank, block - 1);
addr = MSR_AMD64_SMCA_MCx_MISCy(bank, block - 1);
out:
smca_bank_addrs[bank][block] = addr;
return addr;
}
@ -468,18 +479,6 @@ static u32 get_block_address(unsigned int cpu, u32 current_addr, u32 low, u32 hi
if ((bank >= mca_cfg.banks) || (block >= NR_BLOCKS))
return addr;
/* Get address from already initialized block. */
if (per_cpu(threshold_banks, cpu)) {
struct threshold_bank *bankp = per_cpu(threshold_banks, cpu)[bank];
if (bankp && bankp->blocks) {
struct threshold_block *blockp = &bankp->blocks[block];
if (blockp)
return blockp->address;
}
}
if (mce_flags.smca)
return smca_get_block_address(cpu, bank, block);

View File

@ -104,6 +104,12 @@ static bool __head check_la57_support(unsigned long physaddr)
}
#endif
/* Code in __startup_64() can be relocated during execution, but the compiler
* doesn't have to generate PC-relative relocations when accessing globals from
* that function. Clang actually does not generate them, which leads to
* boot-time crashes. To work around this problem, every global pointer must
* be adjusted using fixup_pointer().
*/
unsigned long __head __startup_64(unsigned long physaddr,
struct boot_params *bp)
{
@ -113,6 +119,7 @@ unsigned long __head __startup_64(unsigned long physaddr,
p4dval_t *p4d;
pudval_t *pud;
pmdval_t *pmd, pmd_entry;
pteval_t *mask_ptr;
bool la57;
int i;
unsigned int *next_pgt_ptr;
@ -196,7 +203,8 @@ unsigned long __head __startup_64(unsigned long physaddr,
pmd_entry = __PAGE_KERNEL_LARGE_EXEC & ~_PAGE_GLOBAL;
/* Filter out unsupported __PAGE_KERNEL_* bits: */
pmd_entry &= __supported_pte_mask;
mask_ptr = fixup_pointer(&__supported_pte_mask, physaddr);
pmd_entry &= *mask_ptr;
pmd_entry += sme_get_me_mask();
pmd_entry += physaddr;

View File

@ -370,6 +370,10 @@ int __copy_instruction(u8 *dest, u8 *src, u8 *real, struct insn *insn)
if (insn->opcode.bytes[0] == BREAKPOINT_INSTRUCTION)
return 0;
/* We should not singlestep on the exception masking instructions */
if (insn_masking_exception(insn))
return 0;
#ifdef CONFIG_X86_64
/* Only x86_64 has RIP relative instructions */
if (insn_rip_relative(insn)) {

View File

@ -457,7 +457,7 @@ static void __init sev_map_percpu_data(void)
static void __init kvm_smp_prepare_cpus(unsigned int max_cpus)
{
native_smp_prepare_cpus(max_cpus);
if (kvm_para_has_hint(KVM_HINTS_DEDICATED))
if (kvm_para_has_hint(KVM_HINTS_REALTIME))
static_branch_disable(&virt_spin_lock_key);
}
@ -553,7 +553,7 @@ static void __init kvm_guest_init(void)
}
if (kvm_para_has_feature(KVM_FEATURE_PV_TLB_FLUSH) &&
!kvm_para_has_hint(KVM_HINTS_DEDICATED) &&
!kvm_para_has_hint(KVM_HINTS_REALTIME) &&
kvm_para_has_feature(KVM_FEATURE_STEAL_TIME))
pv_mmu_ops.flush_tlb_others = kvm_flush_tlb_others;
@ -649,7 +649,7 @@ static __init int kvm_setup_pv_tlb_flush(void)
int cpu;
if (kvm_para_has_feature(KVM_FEATURE_PV_TLB_FLUSH) &&
!kvm_para_has_hint(KVM_HINTS_DEDICATED) &&
!kvm_para_has_hint(KVM_HINTS_REALTIME) &&
kvm_para_has_feature(KVM_FEATURE_STEAL_TIME)) {
for_each_possible_cpu(cpu) {
zalloc_cpumask_var_node(per_cpu_ptr(&__pv_tlb_mask, cpu),
@ -745,7 +745,7 @@ void __init kvm_spinlock_init(void)
if (!kvm_para_has_feature(KVM_FEATURE_PV_UNHALT))
return;
if (kvm_para_has_hint(KVM_HINTS_DEDICATED))
if (kvm_para_has_hint(KVM_HINTS_REALTIME))
return;
__pv_init_lock_hash();

Some files were not shown because too many files have changed in this diff Show More