m68knommu: make 527x QSPI platform addressing consistent

If we make all QSPI (SPI protocol) addressing consistent across all ColdFire
family members then we will be able to remove the duplicated plaform data
and code and use a single setup for all.

So modify the ColdFire 527x QSPI addressing so that:

. base addresses are absolute (not relative to MBAR peripheral register)
. use a common name for IRQs used
. move chip select definitions (CS) to appropriate header

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
This commit is contained in:
Greg Ungerer 2011-12-24 12:40:37 +10:00
parent 2424f54902
commit 6c84a60eb9
3 changed files with 29 additions and 17 deletions

View File

@ -59,6 +59,8 @@
#define MCF_IRQ_FECTX1 (MCFINT2_VECBASE + MCFINT2_FECTX1)
#define MCF_IRQ_FECENTC1 (MCFINT2_VECBASE + MCFINT2_FECENTC1)
#define MCF_IRQ_QSPI (MCFINT_VECBASE + MCFINT_QSPI)
/*
* SDRAM configuration registers.
*/
@ -103,6 +105,28 @@
#define MCFFEC_BASE1 (MCF_IPSBAR + 0x1800)
#define MCFFEC_SIZE1 0x800
/*
* QSPI module.
*/
#define MCFQSPI_BASE (MCF_IPSBAR + 0x340)
#define MCFQSPI_SIZE 0x40
#ifdef CONFIG_M5271
#define MCFQSPI_CS0 91
#define MCFQSPI_CS1 92
#define MCFQSPI_CS2 99
#define MCFQSPI_CS3 103
#endif
#ifdef CONFIG_M5275
#define MCFQSPI_CS0 59
#define MCFQSPI_CS1 60
#define MCFQSPI_CS2 61
#define MCFQSPI_CS3 62
#endif
/*
* GPIO module.
*/
#ifdef CONFIG_M5271
#define MCFGPIO_PODR_ADDR (MCF_IPSBAR + 0x100000)
#define MCFGPIO_PODR_DATAH (MCF_IPSBAR + 0x100001)

View File

@ -21,7 +21,7 @@
#ifndef mcfqspi_h
#define mcfqspi_h
#if defined(CONFIG_M527x) || defined(CONFIG_M528x)
#if defined(CONFIG_M528x)
#define MCFQSPI_IOBASE (MCF_IPSBAR + 0x340)
#elif defined(CONFIG_M532x)
#define MCFQSPI_IOBASE 0xFC058000

View File

@ -29,29 +29,17 @@
#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
static struct resource m527x_qspi_resources[] = {
{
.start = MCFQSPI_IOBASE,
.end = MCFQSPI_IOBASE + MCFQSPI_IOSIZE - 1,
.start = MCFQSPI_BASE,
.end = MCFQSPI_BASE + MCFQSPI_SIZE - 1,
.flags = IORESOURCE_MEM,
},
{
.start = MCFINT_VECBASE + MCFINT_QSPI,
.end = MCFINT_VECBASE + MCFINT_QSPI,
.start = MCF_IRQ_QSPI,
.end = MCF_IRQ_QSPI,
.flags = IORESOURCE_IRQ,
},
};
#if defined(CONFIG_M5271)
#define MCFQSPI_CS0 91
#define MCFQSPI_CS1 92
#define MCFQSPI_CS2 99
#define MCFQSPI_CS3 103
#elif defined(CONFIG_M5275)
#define MCFQSPI_CS0 59
#define MCFQSPI_CS1 60
#define MCFQSPI_CS2 61
#define MCFQSPI_CS3 62
#endif
static int m527x_cs_setup(struct mcfqspi_cs_control *cs_control)
{
int status;