Replace HTTP links with HTTPS ones: Documentation/admin-guide

Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.

Deterministic algorithm:
For each file:
  If not .svg:
    For each line:
      If doesn't contain `\bxmlns\b`:
        For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
          If both the HTTP and HTTPS versions
          return 200 OK and serve the same content:
            Replace HTTP with HTTPS.

Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200627072935.62652-1-grandmaster@al2klimov.de
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
This commit is contained in:
Alexander A. Klimov
2020-06-27 09:29:35 +02:00
committed by Jonathan Corbet
parent 3e28c5ca1d
commit 6b2484e13a
12 changed files with 20 additions and 20 deletions

View File

@@ -135,7 +135,7 @@ single project which, although still considered experimental, is fit
for use. Please feel free to add projects that have been the victims
of my ignorance.
- http://www.thinkwiki.org/wiki/HDAPS
- https://www.thinkwiki.org/wiki/HDAPS
See this page for information about Linux support of the hard disk
active protection system as implemented in IBM/Lenovo Thinkpads.

View File

@@ -151,7 +151,7 @@ Bugs:
different way to adjust the backlighting of the screen. There
is a userspace utility to adjust the brightness on those models,
which can be downloaded from
http://www.acc.umu.se/~erikw/program/smartdimmer-0.1.tar.bz2
https://www.acc.umu.se/~erikw/program/smartdimmer-0.1.tar.bz2
- since all development was done by reverse engineering, there is
*absolutely no guarantee* that this driver will not crash your

View File

@@ -904,7 +904,7 @@ temperatures:
The mapping of thermal sensors to physical locations varies depending on
system-board model (and thus, on ThinkPad model).
http://thinkwiki.org/wiki/Thermal_Sensors is a public wiki page that
https://thinkwiki.org/wiki/Thermal_Sensors is a public wiki page that
tries to track down these locations for various models.
Most (newer?) models seem to follow this pattern:
@@ -925,7 +925,7 @@ For the R51 (source: Thomas Gruber):
- 3: Internal HDD
For the T43, T43/p (source: Shmidoax/Thinkwiki.org)
http://thinkwiki.org/wiki/Thermal_Sensors#ThinkPad_T43.2C_T43p
https://thinkwiki.org/wiki/Thermal_Sensors#ThinkPad_T43.2C_T43p
- 2: System board, left side (near PCMCIA slot), reported as HDAPS temp
- 3: PCMCIA slot
@@ -935,7 +935,7 @@ http://thinkwiki.org/wiki/Thermal_Sensors#ThinkPad_T43.2C_T43p
- 11: Power regulator, underside of system board, below F2 key
The A31 has a very atypical layout for the thermal sensors
(source: Milos Popovic, http://thinkwiki.org/wiki/Thermal_Sensors#ThinkPad_A31)
(source: Milos Popovic, https://thinkwiki.org/wiki/Thermal_Sensors#ThinkPad_A31)
- 1: CPU
- 2: Main Battery: main sensor