leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity

First batch of cleanup/SoC for 3.19:

Browse Source 
- removal of old at91x40 !MMU ARM7TDMI support which was kind of rusty
 - removal of board-sam9m10g45ek.c and board-sam9rlek.c from mach-at91
   and the code related to these board C files + defconfigs. Use DT for them
   now!
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJUV8AoAAoJEAf03oE53VmQV3cH+wbCgoOjhLmlVHmXi6ZXw53G
 tubx1l6Su2xfz89eO6gPrBjm/LtsQgxz8kWUQbQEr1dNBIYig/NR16LK1skIkSfl
 p7Xx+4d3DZulkDhzS8evbc7AvQxbMHTTdal1Dlf1Rj/AlVt3Fba3UqchFtIs++85
 CPOBDNsI5CeUm0swiLuHkHbjfvzWykX+g055bDKAiPxht7zUknggRVnst5FBc2ql
 R+YUI/O/9ta8unLGKTQuPs3Cb/mitQfWvRw0WFUvaEMI+JgvtyKRCG0NqYUkW9bD
 wmUnGvLrJUBb48hfd5OsmC3JVBbLb9Wy5hgVazMqz5FHZXnQeTf5lOggeyhELSw=
 =aZf5
 -----END PGP SIGNATURE-----

Merge tag 'at91-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into next/cleanup

Merge "at91: cleanup for 3.19 #1" from Nicolas Ferre:

"The pull-request that was sent late for 3.18. It was removing the old
!MMU at91x40 and 2 board files plus the whole code in at91sam9g45 &
at91sam9rl files for implementing this deprecated method. For these
particular ones, the EK were the only one to use this code. We can use
these boards with DT right now."

First batch of cleanup/SoC for 3.19:
- removal of old at91x40 !MMU ARM7TDMI support which was kind of rusty
- removal of board-sam9m10g45ek.c and board-sam9rlek.c from mach-at91
  and the code related to these board C files + defconfigs. Use DT for them
  now!

* tag 'at91-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91:
  ARM: at91: remove at91sam9rl legacy board support
  ARM: at91: remove at91sam9g45/9m10 legacy board support
  ARM: at91: remove no-MMU at91x40 support

Signed-off-by: Olof Johansson <olof@lixom.net>
This commit is contained in:
Olof Johansson 2014-11-08 16:54:46 -08:00
commit 678a438d82
23 changed files with 5 additions and 5567 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

175
arch/arm/configs/at91sam9g45_defconfig
View File

@ -1,175 +0,0 @@
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_EMBEDDED=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91SAM9G45=y
CONFIG_MACH_AT91SAM9M10G45EK=y
CONFIG_MACH_AT91SAM9_DT=y
CONFIG_AT91_SLOW_CLOCK=y
CONFIG_AEABI=y
CONFIG_UACCESS_WITH_MEMCPY=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=128M console=ttyS0,115200 initrd=0x71100000,25165824 root=/dev/ram0 rw"
CONFIG_AUTO_ZRELADDR=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_DIAG is not set
CONFIG_IPV6=y
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_BEET is not set
CONFIG_IPV6_SIT_6RD=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_DATAFLASH=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ATMEL=y
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_GLUEBI=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=4
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_ATMEL_TCLIB=y
CONFIG_ATMEL_SSC=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
CONFIG_MACB=y
CONFIG_DAVICOM_PHY=y
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
# CONFIG_KEYBOARD_ATKBD is not set
CONFIG_KEYBOARD_QT1070=y
CONFIG_KEYBOARD_QT2160=y
CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ATMEL_MXT=m
# CONFIG_SERIO is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
CONFIG_HW_RANDOM=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_GPIO=y
CONFIG_SPI=y
CONFIG_SPI_ATMEL=y
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_RESET=y
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_AT91SAM9X_WATCHDOG=y
CONFIG_FB=y
CONFIG_FB_ATMEL=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_ATMEL_LCDC=y
# CONFIG_BACKLIGHT_GENERIC is not set
CONFIG_BACKLIGHT_PWM=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_LOGO=y
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_VERBOSE_PROCFS is not set
# CONFIG_SND_DRIVERS is not set
# CONFIG_SND_ARM is not set
CONFIG_SND_ATMEL_AC97C=y
# CONFIG_SND_SPI is not set
# CONFIG_SND_USB is not set
# CONFIG_USB_HID is not set
CONFIG_USB=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_ACM=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_ATMEL_USBA=y
CONFIG_USB_G_MULTI=y
CONFIG_USB_G_MULTI_CDC=y
CONFIG_MMC=y
# CONFIG_MMC_BLOCK_BOUNCE is not set
CONFIG_MMC_ATMELMCI=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_PWM=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_AT91RM9200=y
CONFIG_DMADEVICES=y
CONFIG_AT_HDMAC=y
CONFIG_DMATEST=m
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_IIO=y
CONFIG_AT91_ADC=y
CONFIG_PWM=y
CONFIG_PWM_ATMEL=y
CONFIG_EXT4_FS=y
CONFIG_FANOTIFY=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_UBIFS_FS=y
CONFIG_UBIFS_FS_ADVANCED_COMPR=y
CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_ISO8859_1=y
CONFIG_STRIP_ASM_SYMS=y
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_FTRACE is not set
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_LL=y
CONFIG_EARLY_PRINTK=y
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_USER_API_HASH=m
CONFIG_CRYPTO_USER_API_SKCIPHER=m
# CONFIG_CRYPTO_HW is not set
CONFIG_FONTS=y

92
arch/arm/configs/at91sam9rl_defconfig
View File

@ -1,92 +0,0 @@
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
CONFIG_EMBEDDED=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91SAM9RL=y
CONFIG_MACH_AT91SAM9RLEK=y
# CONFIG_ARM_THUMB is not set
CONFIG_AEABI=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,17105363 root=/dev/ram0 rw"
CONFIG_AUTO_ZRELADDR=y
CONFIG_NET=y
CONFIG_UNIX=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_DATAFLASH=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ATMEL=y
CONFIG_MTD_UBI=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=4
CONFIG_BLK_DEV_RAM_SIZE=24576
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_SERIO is not set
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_GPIO=y
CONFIG_SPI=y
CONFIG_SPI_ATMEL=y
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_RESET=y
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_AT91SAM9X_WATCHDOG=y
CONFIG_FB=y
CONFIG_FB_ATMEL=y
CONFIG_USB_GADGET=y
CONFIG_USB_ATMEL_USBA=y
CONFIG_MMC=y
CONFIG_MMC_ATMELMCI=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_PWM=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_AT91SAM9=y
CONFIG_IIO=y
CONFIG_AT91_ADC=y
CONFIG_PWM=y
CONFIG_PWM_ATMEL=y
CONFIG_EXT4_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_UBIFS_FS=y
CONFIG_CRAMFS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_UTF8=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_LL=y

48
arch/arm/configs/at91x40_defconfig
View File

@ -1,48 +0,0 @@
CONFIG_EXPERIMENTAL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EMBEDDED=y
# CONFIG_HOTPLUG is not set
# CONFIG_ELF_CORE is not set
# CONFIG_FUTEX is not set
# CONFIG_TIMERFD is not set
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
# CONFIG_MMU is not set
CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91X40=y
CONFIG_MACH_AT91EB01=y
CONFIG_AT91_EARLY_USART0=y
CONFIG_CPU_ARM7TDMI=y
CONFIG_SET_MEM_PARAM=y
CONFIG_DRAM_BASE=0x01000000
CONFIG_DRAM_SIZE=0x00400000
CONFIG_FLASH_MEM_BASE=0x01400000
CONFIG_PROCESSOR_ID=0x14000040
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_BINFMT_FLAT=y
# CONFIG_SUSPEND is not set
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=y
CONFIG_BLK_DEV_RAM=y
# CONFIG_INPUT is not set
# CONFIG_SERIO is not set
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
# CONFIG_USB_SUPPORT is not set
CONFIG_EXT2_FS=y
# CONFIG_DNOTIFY is not set
CONFIG_ROMFS_FS=y
# CONFIG_ENABLE_MUST_CHECK is not set

20
arch/arm/mach-at91/Kconfig
View File

@ -18,18 +18,14 @@ config HAVE_AT91_DBGU2
config AT91_USE_OLD_CLK
bool
config AT91_PMC_UNIT
bool
default !ARCH_AT91X40
config COMMON_CLK_AT91
bool
default AT91_PMC_UNIT && USE_OF && !AT91_USE_OLD_CLK
default USE_OF && !AT91_USE_OLD_CLK
select COMMON_CLK
config OLD_CLK_AT91
bool
default AT91_PMC_UNIT && AT91_USE_OLD_CLK
default AT91_USE_OLD_CLK
config OLD_IRQ_AT91
bool
@ -65,16 +61,6 @@ choice
prompt "Core type"
config ARCH_AT91X40
bool "ARM7 AT91X40"
depends on !MMU
select CPU_ARM7TDMI
select ARCH_USES_GETTIMEOFFSET
select OLD_IRQ_AT91
help
Select this if you are using one of Atmel's AT91X40 SoC.
config SOC_SAM_V4_V5
bool "ARM9 AT91SAM9/AT91RM9200"
help
@ -199,7 +185,7 @@ config SOC_AT91SAM9N12
endif # SOC_SAM_V4_V5
if SOC_SAM_V4_V5 || ARCH_AT91X40
if SOC_SAM_V4_V5
source arch/arm/mach-at91/Kconfig.non_dt
endif

58
arch/arm/mach-at91/Kconfig.non_dt
View File

@ -5,7 +5,6 @@ config HAVE_AT91_DATAFLASH_CARD
choice
prompt "Atmel AT91 Processor Devices for non DT boards"
depends on !ARCH_AT91X40
config ARCH_AT91_NONE
bool "None"
@ -34,18 +33,6 @@ config ARCH_AT91SAM9263
select AT91_USE_OLD_CLK
select OLD_IRQ_AT91
config ARCH_AT91SAM9RL
bool "AT91SAM9RL"
select SOC_AT91SAM9RL
select AT91_USE_OLD_CLK
select OLD_IRQ_AT91
config ARCH_AT91SAM9G45
bool "AT91SAM9G45"
select SOC_AT91SAM9G45
select AT91_USE_OLD_CLK
select OLD_IRQ_AT91
endchoice
config ARCH_AT91SAM9G20
@ -288,51 +275,6 @@ endif
# ----------------------------------------------------------
if ARCH_AT91SAM9RL
comment "AT91SAM9RL Board Type"
config MACH_AT91SAM9RLEK
bool "Atmel AT91SAM9RL-EK Evaluation Kit"
help
Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit.
endif
# ----------------------------------------------------------
if ARCH_AT91SAM9G45
comment "AT91SAM9G45 Board Type"
config MACH_AT91SAM9M10G45EK
bool "Atmel AT91SAM9M10G45-EK Evaluation Kits"
help
Select this if you are using Atmel's AT91SAM9M10G45-EK Evaluation Kit.
Those boards can be populated with any SoC of AT91SAM9G45 or AT91SAM9M10
families: AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11.
<http://www.atmel.com/tools/SAM9M10-G45-EK.aspx>
endif
# ----------------------------------------------------------
if ARCH_AT91X40
comment "AT91X40 Board Type"
config MACH_AT91EB01
bool "Atmel AT91EB01 Evaluation Kit"
help
Select this if you are using Atmel's AT91EB01 Evaluation Kit.
It is also a popular target for simulators such as GDB's
ARM simulator (commonly known as the ARMulator) and the
Skyeye simulator.
endif
# ----------------------------------------------------------
comment "AT91 Board Options"
config MTD_AT91_DATAFLASH_CARD

12
arch/arm/mach-at91/Makefile
View File

@ -24,9 +24,6 @@ obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200_devices.o
obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260_devices.o
obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261_devices.o
obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263_devices.o
obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl_devices.o
obj-$(CONFIG_ARCH_AT91SAM9G45) += at91sam9g45_devices.o
obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o
# AT91RM9200 board-specific support
obj-$(CONFIG_MACH_ONEARM) += board-1arm.o
@ -58,9 +55,6 @@ obj-$(CONFIG_MACH_AT91SAM9G10EK) += board-sam9261ek.o
# AT91SAM9263 board-specific support
obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o
# AT91SAM9RL board-specific support
obj-$(CONFIG_MACH_AT91SAM9RLEK) += board-sam9rlek.o
# AT91SAM9G20 board-specific support
obj-$(CONFIG_MACH_AT91SAM9G20EK) += board-sam9g20ek.o
obj-$(CONFIG_MACH_CPU9G20) += board-cpu9krea.o
@ -72,9 +66,6 @@ obj-$(CONFIG_MACH_GSIA18S) += board-gsia18s.o board-stamp9g20.o
# AT91SAM9260/AT91SAM9G20 board-specific support
obj-$(CONFIG_MACH_SNAPPER_9260) += board-snapper9260.o
# AT91SAM9G45 board-specific support
obj-$(CONFIG_MACH_AT91SAM9M10G45EK) += board-sam9m10g45ek.o
# AT91SAM board with device-tree
obj-$(CONFIG_MACH_AT91RM9200_DT) += board-dt-rm9200.o
obj-$(CONFIG_MACH_AT91SAM9_DT) += board-dt-sam9.o
@ -82,9 +73,6 @@ obj-$(CONFIG_MACH_AT91SAM9_DT) += board-dt-sam9.o
# SAMA5 board with device-tree
obj-$(CONFIG_MACH_SAMA5_DT) += board-dt-sama5.o
# AT91X40 board-specific support
obj-$(CONFIG_MACH_AT91EB01) += board-eb01.o
# Drivers
obj-y += leds.o

448
arch/arm/mach-at91/at91sam9g45.c
View File

@ -10,356 +10,12 @@
*
*/
#include <linux/module.h>
#include <linux/dma-mapping.h>
#include <linux/clk/at91_pmc.h>
#include <linux/platform_device.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/system_misc.h>
#include <mach/at91sam9g45.h>
#include <mach/cpu.h>
#include <mach/hardware.h>
#include "at91_aic.h"
#include "soc.h"
#include "generic.h"
#include "sam9_smc.h"
#include "pm.h"
#if defined(CONFIG_OLD_CLK_AT91)
#include "clock.h"
/* --------------------------------------------------------------------
* Clocks
* -------------------------------------------------------------------- */
/*
* The peripheral clocks.
*/
static struct clk pioA_clk = {
.name = "pioA_clk",
.pmc_mask = 1 << AT91SAM9G45_ID_PIOA,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk pioB_clk = {
.name = "pioB_clk",
.pmc_mask = 1 << AT91SAM9G45_ID_PIOB,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk pioC_clk = {
.name = "pioC_clk",
.pmc_mask = 1 << AT91SAM9G45_ID_PIOC,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk pioDE_clk = {
.name = "pioDE_clk",
.pmc_mask = 1 << AT91SAM9G45_ID_PIODE,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk trng_clk = {
.name = "trng_clk",
.pmc_mask = 1 << AT91SAM9G45_ID_TRNG,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk usart0_clk = {
.name = "usart0_clk",
.pmc_mask = 1 << AT91SAM9G45_ID_US0,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk usart1_clk = {
.name = "usart1_clk",
.pmc_mask = 1 << AT91SAM9G45_ID_US1,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk usart2_clk = {
.name = "usart2_clk",
.pmc_mask = 1 << AT91SAM9G45_ID_US2,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk usart3_clk = {
.name = "usart3_clk",
.pmc_mask = 1 << AT91SAM9G45_ID_US3,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk mmc0_clk = {
.name = "mci0_clk",
.pmc_mask = 1 << AT91SAM9G45_ID_MCI0,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk twi0_clk = {
.name = "twi0_clk",
.pmc_mask = 1 << AT91SAM9G45_ID_TWI0,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk twi1_clk = {
.name = "twi1_clk",
.pmc_mask = 1 << AT91SAM9G45_ID_TWI1,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk spi0_clk = {
.name = "spi0_clk",
.pmc_mask = 1 << AT91SAM9G45_ID_SPI0,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk spi1_clk = {
.name = "spi1_clk",
.pmc_mask = 1 << AT91SAM9G45_ID_SPI1,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk ssc0_clk = {
.name = "ssc0_clk",
.pmc_mask = 1 << AT91SAM9G45_ID_SSC0,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk ssc1_clk = {
.name = "ssc1_clk",
.pmc_mask = 1 << AT91SAM9G45_ID_SSC1,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk tcb0_clk = {
.name = "tcb0_clk",
.pmc_mask = 1 << AT91SAM9G45_ID_TCB,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk pwm_clk = {
.name = "pwm_clk",
.pmc_mask = 1 << AT91SAM9G45_ID_PWMC,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk tsc_clk = {
.name = "tsc_clk",
.pmc_mask = 1 << AT91SAM9G45_ID_TSC,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk dma_clk = {
.name = "dma_clk",
.pmc_mask = 1 << AT91SAM9G45_ID_DMA,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk uhphs_clk = {
.name = "uhphs_clk",
.pmc_mask = 1 << AT91SAM9G45_ID_UHPHS,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk lcdc_clk = {
.name = "lcdc_clk",
.pmc_mask = 1 << AT91SAM9G45_ID_LCDC,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk ac97_clk = {
.name = "ac97_clk",
.pmc_mask = 1 << AT91SAM9G45_ID_AC97C,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk macb_clk = {
.name = "pclk",
.pmc_mask = 1 << AT91SAM9G45_ID_EMAC,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk isi_clk = {
.name = "isi_clk",
.pmc_mask = 1 << AT91SAM9G45_ID_ISI,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk udphs_clk = {
.name = "udphs_clk",
.pmc_mask = 1 << AT91SAM9G45_ID_UDPHS,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk mmc1_clk = {
.name = "mci1_clk",
.pmc_mask = 1 << AT91SAM9G45_ID_MCI1,
.type = CLK_TYPE_PERIPHERAL,
};
/* Video decoder clock - Only for sam9m10/sam9m11 */
static struct clk vdec_clk = {
.name = "vdec_clk",
.pmc_mask = 1 << AT91SAM9G45_ID_VDEC,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk adc_op_clk = {
.name = "adc_op_clk",
.type = CLK_TYPE_PERIPHERAL,
.rate_hz = 300000,
};
/* AES/TDES/SHA clock - Only for sam9m11/sam9g56 */
static struct clk aestdessha_clk = {
.name = "aestdessha_clk",
.pmc_mask = 1 << AT91SAM9G45_ID_AESTDESSHA,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk *periph_clocks[] __initdata = {
&pioA_clk,
&pioB_clk,
&pioC_clk,
&pioDE_clk,
&trng_clk,
&usart0_clk,
&usart1_clk,
&usart2_clk,
&usart3_clk,
&mmc0_clk,
&twi0_clk,
&twi1_clk,
&spi0_clk,
&spi1_clk,
&ssc0_clk,
&ssc1_clk,
&tcb0_clk,
&pwm_clk,
&tsc_clk,
&dma_clk,
&uhphs_clk,
&lcdc_clk,
&ac97_clk,
&macb_clk,
&isi_clk,
&udphs_clk,
&mmc1_clk,
&adc_op_clk,
&aestdessha_clk,
// irq0
};
static struct clk_lookup periph_clocks_lookups[] = {
/* One additional fake clock for macb_hclk */
CLKDEV_CON_ID("hclk", &macb_clk),
/* One additional fake clock for ohci */
CLKDEV_CON_ID("ohci_clk", &uhphs_clk),
CLKDEV_CON_DEV_ID("hclk", "at91sam9g45-lcdfb.0", &lcdc_clk),
CLKDEV_CON_DEV_ID("hclk", "at91sam9g45es-lcdfb.0", &lcdc_clk),
CLKDEV_CON_DEV_ID("ehci_clk", "atmel-ehci", &uhphs_clk),
CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk),
CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk),
CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.0", &mmc0_clk),
CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.1", &mmc1_clk),
CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb0_clk),
CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tcb0_clk),
CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g10.0", &twi0_clk),
CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g10.1", &twi1_clk),
CLKDEV_CON_DEV_ID("pclk", "at91sam9g45_ssc.0", &ssc0_clk),
CLKDEV_CON_DEV_ID("pclk", "at91sam9g45_ssc.1", &ssc1_clk),
CLKDEV_CON_DEV_ID("pclk", "fff9c000.ssc", &ssc0_clk),
CLKDEV_CON_DEV_ID("pclk", "fffa0000.ssc", &ssc1_clk),
CLKDEV_CON_DEV_ID(NULL, "atmel-trng", &trng_clk),
CLKDEV_CON_DEV_ID(NULL, "atmel_sha", &aestdessha_clk),
CLKDEV_CON_DEV_ID(NULL, "atmel_tdes", &aestdessha_clk),
CLKDEV_CON_DEV_ID(NULL, "atmel_aes", &aestdessha_clk),
CLKDEV_CON_DEV_ID(NULL, "at91sam9rl-pwm", &pwm_clk),
/* more usart lookup table for DT entries */
CLKDEV_CON_DEV_ID("usart", "ffffee00.serial", &mck),
CLKDEV_CON_DEV_ID("usart", "fff8c000.serial", &usart0_clk),
CLKDEV_CON_DEV_ID("usart", "fff90000.serial", &usart1_clk),
CLKDEV_CON_DEV_ID("usart", "fff94000.serial", &usart2_clk),
CLKDEV_CON_DEV_ID("usart", "fff98000.serial", &usart3_clk),
/* more tc lookup table for DT entries */
CLKDEV_CON_DEV_ID("t0_clk", "fff7c000.timer", &tcb0_clk),
CLKDEV_CON_DEV_ID("t0_clk", "fffd4000.timer", &tcb0_clk),
CLKDEV_CON_DEV_ID("hclk", "700000.ohci", &uhphs_clk),
CLKDEV_CON_DEV_ID("ehci_clk", "800000.ehci", &uhphs_clk),
CLKDEV_CON_DEV_ID("mci_clk", "fff80000.mmc", &mmc0_clk),
CLKDEV_CON_DEV_ID("mci_clk", "fffd0000.mmc", &mmc1_clk),
CLKDEV_CON_DEV_ID(NULL, "fff84000.i2c", &twi0_clk),
CLKDEV_CON_DEV_ID(NULL, "fff88000.i2c", &twi1_clk),
CLKDEV_CON_DEV_ID("spi_clk", "fffa4000.spi", &spi0_clk),
CLKDEV_CON_DEV_ID("spi_clk", "fffa8000.spi", &spi1_clk),
CLKDEV_CON_DEV_ID("hclk", "600000.gadget", &utmi_clk),
CLKDEV_CON_DEV_ID("pclk", "600000.gadget", &udphs_clk),
/* fake hclk clock */
CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &uhphs_clk),
CLKDEV_CON_DEV_ID(NULL, "fffff200.gpio", &pioA_clk),
CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioB_clk),
CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioC_clk),
CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioDE_clk),
CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioDE_clk),
CLKDEV_CON_ID("pioA", &pioA_clk),
CLKDEV_CON_ID("pioB", &pioB_clk),
CLKDEV_CON_ID("pioC", &pioC_clk),
CLKDEV_CON_ID("pioD", &pioDE_clk),
CLKDEV_CON_ID("pioE", &pioDE_clk),
/* Fake adc clock */
CLKDEV_CON_ID("adc_clk", &tsc_clk),
CLKDEV_CON_DEV_ID(NULL, "fffb8000.pwm", &pwm_clk),
};
static struct clk_lookup usart_clocks_lookups[] = {
CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk),
};
/*
* The two programmable clocks.
* You must configure pin multiplexing to bring these signals out.
*/
static struct clk pck0 = {
.name = "pck0",
.pmc_mask = AT91_PMC_PCK0,
.type = CLK_TYPE_PROGRAMMABLE,
.id = 0,
};
static struct clk pck1 = {
.name = "pck1",
.pmc_mask = AT91_PMC_PCK1,
.type = CLK_TYPE_PROGRAMMABLE,
.id = 1,
};
static void __init at91sam9g45_register_clocks(void)
{
int i;
for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
clk_register(periph_clocks[i]);
clkdev_add_table(periph_clocks_lookups,
ARRAY_SIZE(periph_clocks_lookups));
clkdev_add_table(usart_clocks_lookups,
ARRAY_SIZE(usart_clocks_lookups));
if (cpu_is_at91sam9m10() || cpu_is_at91sam9m11())
clk_register(&vdec_clk);
clk_register(&pck0);
clk_register(&pck1);
}
#else
#define at91sam9g45_register_clocks NULL
#endif
/* --------------------------------------------------------------------
* GPIO
* -------------------------------------------------------------------- */
static struct at91_gpio_bank at91sam9g45_gpio[] __initdata = {
{
.id = AT91SAM9G45_ID_PIOA,
.regbase = AT91SAM9G45_BASE_PIOA,
}, {
.id = AT91SAM9G45_ID_PIOB,
.regbase = AT91SAM9G45_BASE_PIOB,
}, {
.id = AT91SAM9G45_ID_PIOC,
.regbase = AT91SAM9G45_BASE_PIOC,
}, {
.id = AT91SAM9G45_ID_PIODE,
.regbase = AT91SAM9G45_BASE_PIOD,
}, {
.id = AT91SAM9G45_ID_PIODE,
.regbase = AT91SAM9G45_BASE_PIOE,
}
};
/* --------------------------------------------------------------------
* AT91SAM9G45 processor initialization
@ -370,113 +26,14 @@ static void __init at91sam9g45_map_io(void)
at91_init_sram(0, AT91SAM9G45_SRAM_BASE, AT91SAM9G45_SRAM_SIZE);
}
static void __init at91sam9g45_ioremap_registers(void)
{
at91_ioremap_ramc(0, AT91SAM9G45_BASE_DDRSDRC1, 512);
at91_ioremap_ramc(1, AT91SAM9G45_BASE_DDRSDRC0, 512);
at91sam926x_ioremap_pit(AT91SAM9G45_BASE_PIT);
at91sam9_ioremap_smc(0, AT91SAM9G45_BASE_SMC);
at91_ioremap_matrix(AT91SAM9G45_BASE_MATRIX);
at91_pm_set_standby(at91_ddr_standby);
}
static void __init at91sam9g45_initialize(void)
{
arm_pm_idle = at91sam9_idle;
at91_sysirq_mask_rtc(AT91SAM9G45_BASE_RTC);
at91_sysirq_mask_rtt(AT91SAM9G45_BASE_RTT);
/* Register GPIO subsystem */
at91_gpio_init(at91sam9g45_gpio, 5);
}
static struct resource rstc_resources[] = {
[0] = {
.start = AT91SAM9G45_BASE_RSTC,
.end = AT91SAM9G45_BASE_RSTC + SZ_16 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AT91SAM9G45_BASE_DDRSDRC1,
.end = AT91SAM9G45_BASE_DDRSDRC1 + SZ_512 - 1,
.flags = IORESOURCE_MEM,
},
[2] = {
.start = AT91SAM9G45_BASE_DDRSDRC0,
.end = AT91SAM9G45_BASE_DDRSDRC0 + SZ_512 - 1,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device rstc_device = {
.name = "at91-sam9g45-reset",
.resource = rstc_resources,
.num_resources = ARRAY_SIZE(rstc_resources),
};
static struct resource shdwc_resources[] = {
[0] = {
.start = AT91SAM9G45_BASE_SHDWC,
.end = AT91SAM9G45_BASE_SHDWC + SZ_16 - 1,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device shdwc_device = {
.name = "at91-poweroff",
.resource = shdwc_resources,
.num_resources = ARRAY_SIZE(shdwc_resources),
};
static void __init at91sam9g45_register_devices(void)
{
platform_device_register(&rstc_device);
platform_device_register(&shdwc_device);
}
/* --------------------------------------------------------------------
* Interrupt initialization
* -------------------------------------------------------------------- */
/*
* The default interrupt priority levels (0 = lowest, 7 = highest).
*/
static unsigned int at91sam9g45_default_irq_priority[NR_AIC_IRQS] __initdata = {
7, /* Advanced Interrupt Controller (FIQ) */
7, /* System Peripherals */
1, /* Parallel IO Controller A */
1, /* Parallel IO Controller B */
1, /* Parallel IO Controller C */
1, /* Parallel IO Controller D and E */
0,
5, /* USART 0 */
5, /* USART 1 */
5, /* USART 2 */
5, /* USART 3 */
0, /* Multimedia Card Interface 0 */
6, /* Two-Wire Interface 0 */
6, /* Two-Wire Interface 1 */
5, /* Serial Peripheral Interface 0 */
5, /* Serial Peripheral Interface 1 */
4, /* Serial Synchronous Controller 0 */
4, /* Serial Synchronous Controller 1 */
0, /* Timer Counter 0, 1, 2, 3, 4 and 5 */
0, /* Pulse Width Modulation Controller */
0, /* Touch Screen Controller */
0, /* DMA Controller */
2, /* USB Host High Speed port */
3, /* LDC Controller */
5, /* AC97 Controller */
3, /* Ethernet */
0, /* Image Sensor Interface */
2, /* USB Device High speed port */
0, /* AESTDESSHA Crypto HW Accelerators */
0, /* Multimedia Card Interface 1 */
0,
0, /* Advanced Interrupt Controller (IRQ0) */
};
static void __init at91sam9g45_init_time(void)
{
at91sam926x_pit_init(NR_IRQS_LEGACY + AT91_ID_SYS);
@ -484,11 +41,6 @@ static void __init at91sam9g45_init_time(void)
AT91_SOC_START(at91sam9g45)
.map_io = at91sam9g45_map_io,
.default_irq_priority = at91sam9g45_default_irq_priority,
.extern_irq = (1 << AT91SAM9G45_ID_IRQ0),
.ioremap_registers = at91sam9g45_ioremap_registers,
.register_clocks = at91sam9g45_register_clocks,
.register_devices = at91sam9g45_register_devices,
.init = at91sam9g45_initialize,
.init_time = at91sam9g45_init_time,
AT91_SOC_END

1915
arch/arm/mach-at91/at91sam9g45_devices.c
View File

File diff suppressed because it is too large Load Diff

371
arch/arm/mach-at91/at91sam9rl.c
View File

@ -9,284 +9,13 @@
* more details.
*/
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/clk/at91_pmc.h>
#include <asm/proc-fns.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/system_misc.h>
#include <mach/cpu.h>
#include <mach/at91_dbgu.h>
#include <mach/at91sam9rl.h>
#include <mach/hardware.h>
#include "at91_aic.h"
#include "soc.h"
#include "generic.h"
#include "sam9_smc.h"
#include "pm.h"
/* --------------------------------------------------------------------
* Clocks
* -------------------------------------------------------------------- */
#if defined(CONFIG_OLD_CLK_AT91)
#include "clock.h"
/*
* The peripheral clocks.
*/
static struct clk pioA_clk = {
.name = "pioA_clk",
.pmc_mask = 1 << AT91SAM9RL_ID_PIOA,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk pioB_clk = {
.name = "pioB_clk",
.pmc_mask = 1 << AT91SAM9RL_ID_PIOB,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk pioC_clk = {
.name = "pioC_clk",
.pmc_mask = 1 << AT91SAM9RL_ID_PIOC,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk pioD_clk = {
.name = "pioD_clk",
.pmc_mask = 1 << AT91SAM9RL_ID_PIOD,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk usart0_clk = {
.name = "usart0_clk",
.pmc_mask = 1 << AT91SAM9RL_ID_US0,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk usart1_clk = {
.name = "usart1_clk",
.pmc_mask = 1 << AT91SAM9RL_ID_US1,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk usart2_clk = {
.name = "usart2_clk",
.pmc_mask = 1 << AT91SAM9RL_ID_US2,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk usart3_clk = {
.name = "usart3_clk",
.pmc_mask = 1 << AT91SAM9RL_ID_US3,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk mmc_clk = {
.name = "mci_clk",
.pmc_mask = 1 << AT91SAM9RL_ID_MCI,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk twi0_clk = {
.name = "twi0_clk",
.pmc_mask = 1 << AT91SAM9RL_ID_TWI0,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk twi1_clk = {
.name = "twi1_clk",
.pmc_mask = 1 << AT91SAM9RL_ID_TWI1,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk spi_clk = {
.name = "spi_clk",
.pmc_mask = 1 << AT91SAM9RL_ID_SPI,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk ssc0_clk = {
.name = "ssc0_clk",
.pmc_mask = 1 << AT91SAM9RL_ID_SSC0,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk ssc1_clk = {
.name = "ssc1_clk",
.pmc_mask = 1 << AT91SAM9RL_ID_SSC1,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk tc0_clk = {
.name = "tc0_clk",
.pmc_mask = 1 << AT91SAM9RL_ID_TC0,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk tc1_clk = {
.name = "tc1_clk",
.pmc_mask = 1 << AT91SAM9RL_ID_TC1,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk tc2_clk = {
.name = "tc2_clk",
.pmc_mask = 1 << AT91SAM9RL_ID_TC2,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk pwm_clk = {
.name = "pwm_clk",
.pmc_mask = 1 << AT91SAM9RL_ID_PWMC,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk tsc_clk = {
.name = "tsc_clk",
.pmc_mask = 1 << AT91SAM9RL_ID_TSC,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk dma_clk = {
.name = "dma_clk",
.pmc_mask = 1 << AT91SAM9RL_ID_DMA,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk udphs_clk = {
.name = "udphs_clk",
.pmc_mask = 1 << AT91SAM9RL_ID_UDPHS,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk lcdc_clk = {
.name = "lcdc_clk",
.pmc_mask = 1 << AT91SAM9RL_ID_LCDC,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk ac97_clk = {
.name = "ac97_clk",
.pmc_mask = 1 << AT91SAM9RL_ID_AC97C,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk adc_op_clk = {
.name = "adc_op_clk",
.type = CLK_TYPE_PERIPHERAL,
.rate_hz = 1000000,
};
static struct clk *periph_clocks[] __initdata = {
&pioA_clk,
&pioB_clk,
&pioC_clk,
&pioD_clk,
&usart0_clk,
&usart1_clk,
&usart2_clk,
&usart3_clk,
&mmc_clk,
&twi0_clk,
&twi1_clk,
&spi_clk,
&ssc0_clk,
&ssc1_clk,
&tc0_clk,
&tc1_clk,
&tc2_clk,
&pwm_clk,
&tsc_clk,
&dma_clk,
&udphs_clk,
&lcdc_clk,
&ac97_clk,
&adc_op_clk,
// irq0
};
static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_DEV_ID("hclk", "at91sam9rl-lcdfb.0", &lcdc_clk),
CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk),
CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk),
CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk),
CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk),
CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.0", &ssc0_clk),
CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.1", &ssc1_clk),
CLKDEV_CON_DEV_ID("pclk", "fffc0000.ssc", &ssc0_clk),
CLKDEV_CON_DEV_ID("pclk", "fffc4000.ssc", &ssc1_clk),
CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g20.0", &twi0_clk),
CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g20.1", &twi1_clk),
CLKDEV_CON_DEV_ID(NULL, "at91sam9rl-pwm", &pwm_clk),
CLKDEV_CON_ID("pioA", &pioA_clk),
CLKDEV_CON_ID("pioB", &pioB_clk),
CLKDEV_CON_ID("pioC", &pioC_clk),
CLKDEV_CON_ID("pioD", &pioD_clk),
/* more lookup table for DT entries */
CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck),
CLKDEV_CON_DEV_ID("usart", "fffb0000.serial", &usart0_clk),
CLKDEV_CON_DEV_ID("usart", "ffffb400.serial", &usart1_clk),
CLKDEV_CON_DEV_ID("usart", "ffffb800.serial", &usart2_clk),
CLKDEV_CON_DEV_ID("usart", "ffffbc00.serial", &usart3_clk),
CLKDEV_CON_DEV_ID("t0_clk", "fffa0000.timer", &tc0_clk),
CLKDEV_CON_DEV_ID("t1_clk", "fffa0000.timer", &tc1_clk),
CLKDEV_CON_DEV_ID("t2_clk", "fffa0000.timer", &tc2_clk),
CLKDEV_CON_DEV_ID("mci_clk", "fffa4000.mmc", &mmc_clk),
CLKDEV_CON_DEV_ID(NULL, "fffa8000.i2c", &twi0_clk),
CLKDEV_CON_DEV_ID(NULL, "fffac000.i2c", &twi1_clk),
CLKDEV_CON_DEV_ID(NULL, "fffc8000.pwm", &pwm_clk),
CLKDEV_CON_DEV_ID(NULL, "ffffc800.pwm", &pwm_clk),
CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioA_clk),
CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioB_clk),
CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioC_clk),
CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioD_clk),
CLKDEV_CON_ID("adc_clk", &tsc_clk),
};
static struct clk_lookup usart_clocks_lookups[] = {
CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk),
};
/*
* The two programmable clocks.
* You must configure pin multiplexing to bring these signals out.
*/
static struct clk pck0 = {
.name = "pck0",
.pmc_mask = AT91_PMC_PCK0,
.type = CLK_TYPE_PROGRAMMABLE,
.id = 0,
};
static struct clk pck1 = {
.name = "pck1",
.pmc_mask = AT91_PMC_PCK1,
.type = CLK_TYPE_PROGRAMMABLE,
.id = 1,
};
static void __init at91sam9rl_register_clocks(void)
{
int i;
for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
clk_register(periph_clocks[i]);
clkdev_add_table(periph_clocks_lookups,
ARRAY_SIZE(periph_clocks_lookups));
clkdev_add_table(usart_clocks_lookups,
ARRAY_SIZE(usart_clocks_lookups));
clk_register(&pck0);
clk_register(&pck1);
}
#endif
/* --------------------------------------------------------------------
* GPIO
* -------------------------------------------------------------------- */
static struct at91_gpio_bank at91sam9rl_gpio[] __initdata = {
{
.id = AT91SAM9RL_ID_PIOA,
.regbase = AT91SAM9RL_BASE_PIOA,
}, {
.id = AT91SAM9RL_ID_PIOB,
.regbase = AT91SAM9RL_BASE_PIOB,
}, {
.id = AT91SAM9RL_ID_PIOC,
.regbase = AT91SAM9RL_BASE_PIOC,
}, {
.id = AT91SAM9RL_ID_PIOD,
.regbase = AT91SAM9RL_BASE_PIOD,
}
};
/* --------------------------------------------------------------------
* AT91SAM9RL processor initialization
@ -309,107 +38,14 @@ static void __init at91sam9rl_map_io(void)
at91_init_sram(0, AT91SAM9RL_SRAM_BASE, sram_size);
}
static void __init at91sam9rl_ioremap_registers(void)
{
at91_ioremap_ramc(0, AT91SAM9RL_BASE_SDRAMC, 512);
at91sam926x_ioremap_pit(AT91SAM9RL_BASE_PIT);
at91sam9_ioremap_smc(0, AT91SAM9RL_BASE_SMC);
at91_ioremap_matrix(AT91SAM9RL_BASE_MATRIX);
at91_pm_set_standby(at91sam9_sdram_standby);
}
static void __init at91sam9rl_initialize(void)
{
arm_pm_idle = at91sam9_idle;
at91_sysirq_mask_rtc(AT91SAM9RL_BASE_RTC);
at91_sysirq_mask_rtt(AT91SAM9RL_BASE_RTT);
/* Register GPIO subsystem */
at91_gpio_init(at91sam9rl_gpio, 4);
}
static struct resource rstc_resources[] = {
[0] = {
.start = AT91SAM9RL_BASE_RSTC,
.end = AT91SAM9RL_BASE_RSTC + SZ_16 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AT91SAM9RL_BASE_SDRAMC,
.end = AT91SAM9RL_BASE_SDRAMC + SZ_512 - 1,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device rstc_device = {
.name = "at91-sam9260-reset",
.resource = rstc_resources,
.num_resources = ARRAY_SIZE(rstc_resources),
};
static struct resource shdwc_resources[] = {
[0] = {
.start = AT91SAM9RL_BASE_SHDWC,
.end = AT91SAM9RL_BASE_SHDWC + SZ_16 - 1,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device shdwc_device = {
.name = "at91-poweroff",
.resource = shdwc_resources,
.num_resources = ARRAY_SIZE(shdwc_resources),
};
static void __init at91sam9rl_register_devices(void)
{
platform_device_register(&rstc_device);
platform_device_register(&shdwc_device);
}
/* --------------------------------------------------------------------
* Interrupt initialization
* -------------------------------------------------------------------- */
/*
* The default interrupt priority levels (0 = lowest, 7 = highest).
*/
static unsigned int at91sam9rl_default_irq_priority[NR_AIC_IRQS] __initdata = {
7, /* Advanced Interrupt Controller */
7, /* System Peripherals */
1, /* Parallel IO Controller A */
1, /* Parallel IO Controller B */
1, /* Parallel IO Controller C */
1, /* Parallel IO Controller D */
5, /* USART 0 */
5, /* USART 1 */
5, /* USART 2 */
5, /* USART 3 */
0, /* Multimedia Card Interface */
6, /* Two-Wire Interface 0 */
6, /* Two-Wire Interface 1 */
5, /* Serial Peripheral Interface */
4, /* Serial Synchronous Controller 0 */
4, /* Serial Synchronous Controller 1 */
0, /* Timer Counter 0 */
0, /* Timer Counter 1 */
0, /* Timer Counter 2 */
0,
0, /* Touch Screen Controller */
0, /* DMA Controller */
2, /* USB Device High speed port */
2, /* LCD Controller */
6, /* AC97 Controller */
0,
0,
0,
0,
0,
0,
0, /* Advanced Interrupt Controller */
};
static void __init at91sam9rl_init_time(void)
{
at91sam926x_pit_init(NR_IRQS_LEGACY + AT91_ID_SYS);
@ -417,13 +53,6 @@ static void __init at91sam9rl_init_time(void)
AT91_SOC_START(at91sam9rl)
.map_io = at91sam9rl_map_io,
.default_irq_priority = at91sam9rl_default_irq_priority,
.extern_irq = (1 << AT91SAM9RL_ID_IRQ0),
.ioremap_registers = at91sam9rl_ioremap_registers,
#if defined(CONFIG_OLD_CLK_AT91)
.register_clocks = at91sam9rl_register_clocks,
#endif
.register_devices = at91sam9rl_register_devices,
.init = at91sam9rl_initialize,
.init_time = at91sam9rl_init_time,
AT91_SOC_END

1260
arch/arm/mach-at91/at91sam9rl_devices.c
View File

File diff suppressed because it is too large Load Diff

93
arch/arm/mach-at91/at91x40.c
View File

@ -1,93 +0,0 @@
/*
* arch/arm/mach-at91/at91x40.c
*
* (C) Copyright 2007, Greg Ungerer <gerg@snapgear.com>
* Copyright (C) 2005 SAN People
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <asm/proc-fns.h>
#include <asm/system_misc.h>
#include <asm/mach/arch.h>
#include <mach/at91x40.h>
#include <mach/at91_st.h>
#include <mach/hardware.h>
#include "at91_aic.h"
#include "generic.h"
/*
* Export the clock functions for the AT91X40. Some external code common
* to all AT91 family parts relys on this, like the gpio and serial support.
*/
int clk_enable(struct clk *clk)
{
return 0;
}
void clk_disable(struct clk *clk)
{
}
unsigned long clk_get_rate(struct clk *clk)
{
return AT91X40_MASTER_CLOCK;
}
static void at91x40_idle(void)
{
/*
* Disable the processor clock. The processor will be automatically
* re-enabled by an interrupt or by a reset.
*/
__raw_writel(AT91_PS_CR_CPU, AT91_IO_P2V(AT91_PS_CR));
cpu_do_idle();
}
void __init at91x40_initialize(unsigned long main_clock)
{
arm_pm_idle = at91x40_idle;
}
/*
* The default interrupt priority levels (0 = lowest, 7 = highest).
*/
static unsigned int at91x40_default_irq_priority[NR_AIC_IRQS] __initdata = {
7, /* Advanced Interrupt Controller (FIQ) */
0, /* System Peripherals */
0, /* USART 0 */
0, /* USART 1 */
2, /* Timer Counter 0 */
2, /* Timer Counter 1 */
2, /* Timer Counter 2 */
0, /* Watchdog timer */
0, /* Parallel IO Controller A */
0, /* Reserved */
0, /* Reserved */
0, /* Reserved */
0, /* Reserved */
0, /* Reserved */
0, /* Reserved */
0, /* Reserved */
0, /* External IRQ0 */
0, /* External IRQ1 */
0, /* External IRQ2 */
};
void __init at91x40_init_interrupts(unsigned int priority[NR_AIC_IRQS])
{
u32 extern_irq = (1 << AT91X40_ID_IRQ0) | (1 << AT91X40_ID_IRQ1)
| (1 << AT91X40_ID_IRQ2);
if (!priority)
priority = at91x40_default_irq_priority;
at91_aic_init(priority, extern_irq);
}

85
arch/arm/mach-at91/at91x40_time.c
View File

@ -1,85 +0,0 @@
/*
* arch/arm/mach-at91/at91x40_time.c
*
* (C) Copyright 2007, Greg Ungerer <gerg@snapgear.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/time.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <mach/at91x40.h>
#include <asm/mach/time.h>
#include "at91_tc.h"
#define at91_tc_read(field) \
__raw_readl(AT91_IO_P2V(AT91_TC) + field)
#define at91_tc_write(field, value) \
__raw_writel(value, AT91_IO_P2V(AT91_TC) + field)
/*
* 3 counter/timer units present.
*/
#define AT91_TC_CLK0BASE 0
#define AT91_TC_CLK1BASE 0x40
#define AT91_TC_CLK2BASE 0x80
static u32 at91x40_gettimeoffset(void)
{
return (at91_tc_read(AT91_TC_CLK1BASE + AT91_TC_CV) * 1000000 /
(AT91X40_MASTER_CLOCK / 128)) * 1000;
}
static irqreturn_t at91x40_timer_interrupt(int irq, void *dev_id)
{
at91_tc_read(AT91_TC_CLK1BASE + AT91_TC_SR);
timer_tick();
return IRQ_HANDLED;
}
static struct irqaction at91x40_timer_irq = {
.name = "at91_tick",
.flags = IRQF_TIMER,
.handler = at91x40_timer_interrupt
};
void __init at91x40_timer_init(void)
{
unsigned int v;
arch_gettimeoffset = at91x40_gettimeoffset;
at91_tc_write(AT91_TC_BCR, 0);
v = at91_tc_read(AT91_TC_BMR);
v = (v & ~AT91_TC_TC1XC1S) | AT91_TC_TC1XC1S_NONE;
at91_tc_write(AT91_TC_BMR, v);
at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_CCR, AT91_TC_CLKDIS);
at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_CMR, (AT91_TC_TIMER_CLOCK4 | AT91_TC_CPCTRG));
at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_IDR, 0xffffffff);
at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_RC, (AT91X40_MASTER_CLOCK / 128) / HZ - 1);
at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_IER, (1<<4));
setup_irq(AT91X40_ID_TC1, &at91x40_timer_irq);
at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_CCR, (AT91_TC_SWTRG | AT91_TC_CLKEN));
}

52
arch/arm/mach-at91/board-eb01.c
View File

@ -1,52 +0,0 @@
/*
* arch/arm/mach-at91/board-eb01.c
*
* (C) Copyright 2007, Greg Ungerer <gerg@snapgear.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/irq.h>
#include <asm/mach-types.h>
#include <mach/hardware.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include "at91_aic.h"
#include "board.h"
#include "generic.h"
static void __init at91eb01_init_irq(void)
{
at91x40_init_interrupts(NULL);
}
static void __init at91eb01_init_early(void)
{
at91x40_initialize(40000000);
}
MACHINE_START(AT91EB01, "Atmel AT91 EB01")
/* Maintainer: Greg Ungerer <gerg@snapgear.com> */
.init_time = at91x40_timer_init,
.handle_irq = at91_aic_handle_irq,
.init_early = at91eb01_init_early,
.init_irq = at91eb01_init_irq,
MACHINE_END

527
arch/arm/mach-at91/board-sam9m10g45ek.c
View File

@ -1,527 +0,0 @@
/*
* Board-specific setup code for the AT91SAM9M10G45 Evaluation Kit family
*
* Covers: * AT91SAM9G45-EKES board
* * AT91SAM9M10G45-EK board
*
* Copyright (C) 2009 Atmel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
*/
#include <linux/types.h>
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/fb.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/leds.h>
#include <linux/atmel-mci.h>
#include <linux/delay.h>
#include <linux/pwm.h>
#include <linux/leds_pwm.h>
#include <linux/platform_data/at91_adc.h>
#include <mach/hardware.h>
#include <video/atmel_lcdc.h>
#include <media/soc_camera.h>
#include <media/atmel-isi.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <mach/at91sam9_smc.h>
#include <mach/system_rev.h>
#include "at91_aic.h"
#include "board.h"
#include "sam9_smc.h"
#include "generic.h"
#include "gpio.h"
static void __init ek_init_early(void)
{
/* Initialize processor: 12.000 MHz crystal */
at91_initialize(12000000);
}
/*
* USB HS Host port (common to OHCI & EHCI)
*/
static struct at91_usbh_data __initdata ek_usbh_hs_data = {
.ports = 2,
.vbus_pin = {AT91_PIN_PD1, AT91_PIN_PD3},
.vbus_pin_active_low = {1, 1},
.overcurrent_pin= {-EINVAL, -EINVAL},
};
/*
* USB HS Device port
*/
static struct usba_platform_data __initdata ek_usba_udc_data = {
.vbus_pin = AT91_PIN_PB19,
};
/*
* SPI devices.
*/
static struct spi_board_info ek_spi_devices[] = {
{ /* DataFlash chip */
.modalias = "mtd_dataflash",
.chip_select = 0,
.max_speed_hz = 15 * 1000 * 1000,
.bus_num = 0,
},
};
/*
* MCI (SD/MMC)
*/
static struct mci_platform_data __initdata mci0_data = {
.slot[0] = {
.bus_width = 4,
.detect_pin = AT91_PIN_PD10,
.wp_pin = -EINVAL,
},
};
static struct mci_platform_data __initdata mci1_data = {
.slot[0] = {
.bus_width = 4,
.detect_pin = AT91_PIN_PD11,
.wp_pin = AT91_PIN_PD29,
},
};
/*
* MACB Ethernet device
*/
static struct macb_platform_data __initdata ek_macb_data = {
.phy_irq_pin = AT91_PIN_PD5,
.is_rmii = 1,
};
/*
* NAND flash
*/
static struct mtd_partition __initdata ek_nand_partition[] = {
{
.name = "Partition 1",
.offset = 0,
.size = SZ_64M,
},
{
.name = "Partition 2",
.offset = MTDPART_OFS_NXTBLK,
.size = MTDPART_SIZ_FULL,
},
};
/* det_pin is not connected */
static struct atmel_nand_data __initdata ek_nand_data = {
.ale = 21,
.cle = 22,
.rdy_pin = AT91_PIN_PC8,
.enable_pin = AT91_PIN_PC14,
.det_pin = -EINVAL,
.ecc_mode = NAND_ECC_SOFT,
.on_flash_bbt = 1,
.parts = ek_nand_partition,
.num_parts = ARRAY_SIZE(ek_nand_partition),
};
static struct sam9_smc_config __initdata ek_nand_smc_config = {
.ncs_read_setup = 0,
.nrd_setup = 2,
.ncs_write_setup = 0,
.nwe_setup = 2,
.ncs_read_pulse = 4,
.nrd_pulse = 4,
.ncs_write_pulse = 4,
.nwe_pulse = 4,
.read_cycle = 7,
.write_cycle = 7,
.mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
.tdf_cycles = 3,
};
static void __init ek_add_device_nand(void)
{
ek_nand_data.bus_width_16 = board_have_nand_16bit();
/* setup bus-width (8 or 16) */
if (ek_nand_data.bus_width_16)
ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
else
ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
/* configure chip-select 3 (NAND) */
sam9_smc_configure(0, 3, &ek_nand_smc_config);
at91_add_device_nand(&ek_nand_data);
}
/*
* ISI
*/
static struct isi_platform_data __initdata isi_data = {
.frate = ISI_CFG1_FRATE_CAPTURE_ALL,
/* to use codec and preview path simultaneously */
.full_mode = 1,
.data_width_flags = ISI_DATAWIDTH_8 | ISI_DATAWIDTH_10,
/* ISI_MCK is provided by programmable clock or external clock */
.mck_hz = 25000000,
};
/*
* soc-camera OV2640
*/
#if defined(CONFIG_SOC_CAMERA_OV2640) || \
defined(CONFIG_SOC_CAMERA_OV2640_MODULE)
static unsigned long isi_camera_query_bus_param(struct soc_camera_link *link)
{
/* ISI board for ek using default 8-bits connection */
return SOCAM_DATAWIDTH_8;
}
static int i2c_camera_power(struct device *dev, int on)
{
/* enable or disable the camera */
pr_debug("%s: %s the camera\n", __func__, on ? "ENABLE" : "DISABLE");
at91_set_gpio_output(AT91_PIN_PD13, !on);
if (!on)
goto out;
/* If enabled, give a reset impulse */
at91_set_gpio_output(AT91_PIN_PD12, 0);
msleep(20);
at91_set_gpio_output(AT91_PIN_PD12, 1);
msleep(100);
out:
return 0;
}
static struct i2c_board_info i2c_camera = {
I2C_BOARD_INFO("ov2640", 0x30),
};
static struct soc_camera_link iclink_ov2640 = {
.bus_id = 0,
.board_info = &i2c_camera,
.i2c_adapter_id = 0,
.power = i2c_camera_power,
.query_bus_param = isi_camera_query_bus_param,
};
static struct platform_device isi_ov2640 = {
.name = "soc-camera-pdrv",
.id = 0,
.dev = {
.platform_data = &iclink_ov2640,
},
};
#endif
/*
* LCD Controller
*/
#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
static struct fb_videomode at91_tft_vga_modes[] = {
{
.name = "LG",
.refresh = 60,
.xres = 480, .yres = 272,
.pixclock = KHZ2PICOS(9000),
.left_margin = 1, .right_margin = 1,
.upper_margin = 40, .lower_margin = 1,
.hsync_len = 45, .vsync_len = 1,
.sync = 0,
.vmode = FB_VMODE_NONINTERLACED,
},
};
static struct fb_monspecs at91fb_default_monspecs = {
.manufacturer = "LG",
.monitor = "LB043WQ1",
.modedb = at91_tft_vga_modes,
.modedb_len = ARRAY_SIZE(at91_tft_vga_modes),
.hfmin = 15000,
.hfmax = 17640,
.vfmin = 57,
.vfmax = 67,
};
#define AT91SAM9G45_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
| ATMEL_LCDC_DISTYPE_TFT \
| ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
/* Driver datas */
static struct atmel_lcdfb_pdata __initdata ek_lcdc_data = {
.lcdcon_is_backlight = true,
.default_bpp = 32,
.default_dmacon = ATMEL_LCDC_DMAEN,
.default_lcdcon2 = AT91SAM9G45_DEFAULT_LCDCON2,
.default_monspecs = &at91fb_default_monspecs,
.guard_time = 9,
.lcd_wiring_mode = ATMEL_LCDC_WIRING_RGB,
};
#else
static struct atmel_lcdfb_pdata __initdata ek_lcdc_data;
#endif
/*
* ADCs and touchscreen
*/
static struct at91_adc_data ek_adc_data = {
.channels_used = BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(4) | BIT(5) | BIT(6) | BIT(7),
.use_external_triggers = true,
.vref = 3300,
.touchscreen_type = ATMEL_ADC_TOUCHSCREEN_4WIRE,
};
/*
* GPIO Buttons
*/
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
static struct gpio_keys_button ek_buttons[] = {
{ /* BP1, "leftclic" */
.code = BTN_LEFT,
.gpio = AT91_PIN_PB6,
.active_low = 1,
.desc = "left_click",
.wakeup = 1,
},
{ /* BP2, "rightclic" */
.code = BTN_RIGHT,
.gpio = AT91_PIN_PB7,
.active_low = 1,
.desc = "right_click",
.wakeup = 1,
},
/* BP3, "joystick" */
{
.code = KEY_LEFT,
.gpio = AT91_PIN_PB14,
.active_low = 1,
.desc = "Joystick Left",
},
{
.code = KEY_RIGHT,
.gpio = AT91_PIN_PB15,
.active_low = 1,
.desc = "Joystick Right",
},
{
.code = KEY_UP,
.gpio = AT91_PIN_PB16,
.active_low = 1,
.desc = "Joystick Up",
},
{
.code = KEY_DOWN,
.gpio = AT91_PIN_PB17,
.active_low = 1,
.desc = "Joystick Down",
},
{
.code = KEY_ENTER,
.gpio = AT91_PIN_PB18,
.active_low = 1,
.desc = "Joystick Press",
},
};
static struct gpio_keys_platform_data ek_button_data = {
.buttons = ek_buttons,
.nbuttons = ARRAY_SIZE(ek_buttons),
};
static struct platform_device ek_button_device = {
.name = "gpio-keys",
.id = -1,
.num_resources = 0,
.dev = {
.platform_data = &ek_button_data,
}
};
static void __init ek_add_device_buttons(void)
{
int i;
for (i = 0; i < ARRAY_SIZE(ek_buttons); i++) {
at91_set_GPIO_periph(ek_buttons[i].gpio, 1);
at91_set_deglitch(ek_buttons[i].gpio, 1);
}
platform_device_register(&ek_button_device);
}
#else
static void __init ek_add_device_buttons(void) {}
#endif
/*
* AC97
* reset_pin is not connected: NRST
*/
static struct ac97c_platform_data ek_ac97_data = {
.reset_pin = -EINVAL,
};
/*
* LEDs ... these could all be PWM-driven, for variable brightness
*/
static struct gpio_led ek_leds[] = {
{ /* "top" led, red, powerled */
.name = "d8",
.gpio = AT91_PIN_PD30,
.default_trigger = "heartbeat",
},
{ /* "left" led, green, userled2, pwm3 */
.name = "d6",
.gpio = AT91_PIN_PD0,
.active_low = 1,
.default_trigger = "nand-disk",
},
#if !IS_ENABLED(CONFIG_LEDS_PWM)
{ /* "right" led, green, userled1, pwm1 */
.name = "d7",
.gpio = AT91_PIN_PD31,
.active_low = 1,
.default_trigger = "mmc0",
},
#endif
};
/*
* PWM Leds
*/
static struct pwm_lookup pwm_lookup[] = {
PWM_LOOKUP("at91sam9rl-pwm", 1, "leds_pwm", "d7",
5000, PWM_POLARITY_INVERSED),
};
#if IS_ENABLED(CONFIG_LEDS_PWM)
static struct led_pwm pwm_leds[] = {
{ /* "right" led, green, userled1, pwm1 */
.name = "d7",
.max_brightness = 255,
},
};
static struct led_pwm_platform_data pwm_data = {
.num_leds = ARRAY_SIZE(pwm_leds),
.leds = pwm_leds,
};
static struct platform_device leds_pwm = {
.name = "leds_pwm",
.id = -1,
.dev = {
.platform_data = &pwm_data,
},
};
#endif
static struct platform_device *devices[] __initdata = {
#if defined(CONFIG_SOC_CAMERA_OV2640) || \
defined(CONFIG_SOC_CAMERA_OV2640_MODULE)
&isi_ov2640,
#endif
#if IS_ENABLED(CONFIG_LEDS_PWM)
&leds_pwm,
#endif
};
static void __init ek_board_init(void)
{
at91_register_devices();
/* Serial */
/* DGBU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
/* USART0 not connected on the -EK board */
/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
at91_register_uart(AT91SAM9G45_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
at91_add_device_serial();
/* USB HS Host */
at91_add_device_usbh_ohci(&ek_usbh_hs_data);
at91_add_device_usbh_ehci(&ek_usbh_hs_data);
/* USB HS Device */
at91_add_device_usba(&ek_usba_udc_data);
/* SPI */
at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
/* MMC */
at91_add_device_mci(0, &mci0_data);
at91_add_device_mci(1, &mci1_data);
/* Ethernet */
at91_add_device_eth(&ek_macb_data);
/* NAND */
ek_add_device_nand();
/* I2C */
at91_add_device_i2c(0, NULL, 0);
/* ISI, using programmable clock as ISI_MCK */
at91_add_device_isi(&isi_data, true);
/* LCD Controller */
at91_add_device_lcdc(&ek_lcdc_data);
/* ADC and touchscreen */
at91_add_device_adc(&ek_adc_data);
/* Push Buttons */
ek_add_device_buttons();
/* AC97 */
at91_add_device_ac97(&ek_ac97_data);
/* LEDs */
at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
pwm_add_table(pwm_lookup, ARRAY_SIZE(pwm_lookup));
#if IS_ENABLED(CONFIG_LEDS_PWM)
at91_add_device_pwm(1 << AT91_PWM1);
#endif
/* Other platform devices */
platform_add_devices(devices, ARRAY_SIZE(devices));
}
MACHINE_START(AT91SAM9M10G45EK, "Atmel AT91SAM9M10G45-EK")
/* Maintainer: Atmel */
.init_time = at91_init_time,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = ek_init_early,
.init_irq = at91_init_irq_default,
.init_machine = ek_board_init,
MACHINE_END

333
arch/arm/mach-at91/board-sam9rlek.c
View File

@ -1,333 +0,0 @@
/*
* Copyright (C) 2005 SAN People
* Copyright (C) 2007 Atmel Corporation
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive for
* more details.
*/
#include <linux/types.h>
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/fb.h>
#include <linux/clk.h>
#include <linux/input.h>
#include <linux/gpio_keys.h>
#include <linux/platform_data/at91_adc.h>
#include <video/atmel_lcdc.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <mach/hardware.h>
#include <mach/at91sam9_smc.h>
#include "at91_aic.h"
#include "board.h"
#include "sam9_smc.h"
#include "generic.h"
#include "gpio.h"
static void __init ek_init_early(void)
{
/* Initialize processor: 12.000 MHz crystal */
at91_initialize(12000000);
}
/*
* USB HS Device port
*/
static struct usba_platform_data __initdata ek_usba_udc_data = {
.vbus_pin = AT91_PIN_PA8,
};
/*
* MCI (SD/MMC)
*/
static struct mci_platform_data __initdata mci0_data = {
.slot[0] = {
.bus_width = 4,
.detect_pin = AT91_PIN_PA15,
.wp_pin = -EINVAL,
},
};
/*
* NAND flash
*/
static struct mtd_partition __initdata ek_nand_partition[] = {
{
.name = "Partition 1",
.offset = 0,
.size = SZ_256K,
},
{
.name = "Partition 2",
.offset = MTDPART_OFS_NXTBLK,
.size = MTDPART_SIZ_FULL,
},
};
static struct atmel_nand_data __initdata ek_nand_data = {
.ale = 21,
.cle = 22,
.det_pin = -EINVAL,
.rdy_pin = AT91_PIN_PD17,
.enable_pin = AT91_PIN_PB6,
.ecc_mode = NAND_ECC_SOFT,
.on_flash_bbt = 1,
.parts = ek_nand_partition,
.num_parts = ARRAY_SIZE(ek_nand_partition),
};
static struct sam9_smc_config __initdata ek_nand_smc_config = {
.ncs_read_setup = 0,
.nrd_setup = 1,
.ncs_write_setup = 0,
.nwe_setup = 1,
.ncs_read_pulse = 3,
.nrd_pulse = 3,
.ncs_write_pulse = 3,
.nwe_pulse = 3,
.read_cycle = 5,
.write_cycle = 5,
.mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
.tdf_cycles = 2,
};
static void __init ek_add_device_nand(void)
{
/* configure chip-select 3 (NAND) */
sam9_smc_configure(0, 3, &ek_nand_smc_config);
at91_add_device_nand(&ek_nand_data);
}
/*
* SPI devices
*/
static struct spi_board_info ek_spi_devices[] = {
{ /* DataFlash chip */
.modalias = "mtd_dataflash",
.chip_select = 0,
.max_speed_hz = 15 * 1000 * 1000,
.bus_num = 0,
},
};
/*
* LCD Controller
*/
#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
static struct fb_videomode at91_tft_vga_modes[] = {
{
.name = "TX09D50VM1CCA @ 60",
.refresh = 60,
.xres = 240, .yres = 320,
.pixclock = KHZ2PICOS(4965),
.left_margin = 1, .right_margin = 33,
.upper_margin = 1, .lower_margin = 0,
.hsync_len = 5, .vsync_len = 1,
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
.vmode = FB_VMODE_NONINTERLACED,
},
};
static struct fb_monspecs at91fb_default_monspecs = {
.manufacturer = "HIT",
.monitor = "TX09D50VM1CCA",
.modedb = at91_tft_vga_modes,
.modedb_len = ARRAY_SIZE(at91_tft_vga_modes),
.hfmin = 15000,
.hfmax = 64000,
.vfmin = 50,
.vfmax = 150,
};
#define AT91SAM9RL_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
| ATMEL_LCDC_DISTYPE_TFT \
| ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
static void at91_lcdc_power_control(struct atmel_lcdfb_pdata *pdata, int on)
{
if (on)
at91_set_gpio_value(AT91_PIN_PC1, 0); /* power up */
else
at91_set_gpio_value(AT91_PIN_PC1, 1); /* power down */
}
/* Driver datas */
static struct atmel_lcdfb_pdata __initdata ek_lcdc_data = {
.lcdcon_is_backlight = true,
.default_bpp = 16,
.default_dmacon = ATMEL_LCDC_DMAEN,
.default_lcdcon2 = AT91SAM9RL_DEFAULT_LCDCON2,
.default_monspecs = &at91fb_default_monspecs,
.atmel_lcdfb_power_control = at91_lcdc_power_control,
.guard_time = 1,
.lcd_wiring_mode = ATMEL_LCDC_WIRING_RGB,
};
#else
static struct atmel_lcdfb_pdata __initdata ek_lcdc_data;
#endif
/*
* AC97
* reset_pin is not connected: NRST
*/
static struct ac97c_platform_data ek_ac97_data = {
.reset_pin = -EINVAL,
};
/*
* LEDs
*/
static struct gpio_led ek_leds[] = {
{ /* "bottom" led, green, userled1 to be defined */
.name = "ds1",
.gpio = AT91_PIN_PD15,
.active_low = 1,
.default_trigger = "none",
},
{ /* "bottom" led, green, userled2 to be defined */
.name = "ds2",
.gpio = AT91_PIN_PD16,
.active_low = 1,
.default_trigger = "none",
},
{ /* "power" led, yellow */
.name = "ds3",
.gpio = AT91_PIN_PD14,
.default_trigger = "heartbeat",
}
};
/*
* ADC + Touchscreen
*/
static struct at91_adc_data ek_adc_data = {
.channels_used = BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(4) | BIT(5),
.use_external_triggers = true,
.vref = 3300,
.touchscreen_type = ATMEL_ADC_TOUCHSCREEN_4WIRE,
};
/*
* GPIO Buttons
*/
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
static struct gpio_keys_button ek_buttons[] = {
{
.gpio = AT91_PIN_PB0,
.code = BTN_2,
.desc = "Right Click",
.active_low = 1,
.wakeup = 1,
},
{
.gpio = AT91_PIN_PB1,
.code = BTN_1,
.desc = "Left Click",
.active_low = 1,
.wakeup = 1,
}
};
static struct gpio_keys_platform_data ek_button_data = {
.buttons = ek_buttons,
.nbuttons = ARRAY_SIZE(ek_buttons),
};
static struct platform_device ek_button_device = {
.name = "gpio-keys",
.id = -1,
.num_resources = 0,
.dev = {
.platform_data = &ek_button_data,
}
};
static void __init ek_add_device_buttons(void)
{
at91_set_gpio_input(AT91_PIN_PB1, 1); /* btn1 */
at91_set_deglitch(AT91_PIN_PB1, 1);
at91_set_gpio_input(AT91_PIN_PB0, 1); /* btn2 */
at91_set_deglitch(AT91_PIN_PB0, 1);
platform_device_register(&ek_button_device);
}
#else
static void __init ek_add_device_buttons(void) {}
#endif
static void __init ek_board_init(void)
{
at91_register_devices();
/* Serial */
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
/* USART0 on ttyS1. (Rx, Tx, CTS, RTS) */
at91_register_uart(AT91SAM9RL_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
at91_add_device_serial();
/* USB HS */
at91_add_device_usba(&ek_usba_udc_data);
/* I2C */
at91_add_device_i2c(NULL, 0);
/* NAND */
ek_add_device_nand();
/* SPI */
at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
/* MMC */
at91_add_device_mci(0, &mci0_data);
/* LCD Controller */
at91_add_device_lcdc(&ek_lcdc_data);
/* AC97 */
at91_add_device_ac97(&ek_ac97_data);
/* Touch Screen Controller + ADC */
at91_add_device_adc(&ek_adc_data);
/* LEDs */
at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
/* Push Buttons */
ek_add_device_buttons();
}
MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK")
/* Maintainer: Atmel */
.init_time = at91_init_time,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = ek_init_early,
.init_irq = at91_init_irq_default,
.init_machine = ek_board_init,
MACHINE_END

3
arch/arm/mach-at91/generic.h
View File

@ -24,14 +24,12 @@ extern void __init at91_init_sram(int bank, unsigned long base,
/* Processors */
extern void __init at91rm9200_set_type(int type);
extern void __init at91_initialize(unsigned long main_clock);
extern void __init at91x40_initialize(unsigned long main_clock);
extern void __init at91rm9200_dt_initialize(void);
extern void __init at91_dt_initialize(void);
/* Interrupts */
extern void __init at91_init_irq_default(void);
extern void __init at91_init_interrupts(unsigned int priority[]);
extern void __init at91x40_init_interrupts(unsigned int priority[]);
extern void __init at91_aic_init(unsigned int priority[],
unsigned int ext_irq_mask);
extern int __init at91_aic_of_init(struct device_node *node,
@ -50,7 +48,6 @@ extern void at91rm9200_ioremap_st(u32 addr);
extern void at91rm9200_timer_init(void);
extern void at91sam926x_ioremap_pit(u32 addr);
extern void at91sam926x_pit_init(int irq);
extern void at91x40_timer_init(void);
/* Clocks */
#ifdef CONFIG_OLD_CLK_AT91

3
arch/arm/mach-at91/include/mach/at91_dbgu.h
View File

@ -16,7 +16,6 @@
#ifndef AT91_DBGU_H
#define AT91_DBGU_H
#if !defined(CONFIG_ARCH_AT91X40)
#define AT91_DBGU_CR (0x00) /* Control Register */
#define AT91_DBGU_MR (0x04) /* Mode Register */
#define AT91_DBGU_IER (0x08) /* Interrupt Enable Register */
@ -34,8 +33,6 @@
#define AT91_DBGU_FNR (0x48) /* Force NTRST Register [SAM9 only] */
#define AT91_DBGU_FNTRST (1 << 0) /* Force NTRST */
#endif /* AT91_DBGU */
/*
* Some AT91 parts that don't have full DEBUG units still support the ID
* and extensions register.

60
arch/arm/mach-at91/include/mach/at91x40.h
View File

@ -1,60 +0,0 @@
/*
* arch/arm/mach-at91/include/mach/at91x40.h
*
* (C) Copyright 2007, Greg Ungerer <gerg@snapgear.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef AT91X40_H
#define AT91X40_H
/*
* IRQ list.
*/
#define AT91X40_ID_USART0 2 /* USART port 0 */
#define AT91X40_ID_USART1 3 /* USART port 1 */
#define AT91X40_ID_TC0 4 /* Timer/Counter 0 */
#define AT91X40_ID_TC1 5 /* Timer/Counter 1*/
#define AT91X40_ID_TC2 6 /* Timer/Counter 2*/
#define AT91X40_ID_WD 7 /* Watchdog? */
#define AT91X40_ID_PIOA 8 /* Parallel IO Controller A */
#define AT91X40_ID_IRQ0 16 /* External IRQ 0 */
#define AT91X40_ID_IRQ1 17 /* External IRQ 1 */
#define AT91X40_ID_IRQ2 18 /* External IRQ 2 */
/*
* System Peripherals
*/
#define AT91_BASE_SYS 0xffc00000
#define AT91_EBI 0xffe00000 /* External Bus Interface */
#define AT91_SF 0xfff00000 /* Special Function */
#define AT91_USART1 0xfffcc000 /* USART 1 */
#define AT91_USART0 0xfffd0000 /* USART 0 */
#define AT91_TC 0xfffe0000 /* Timer Counter */
#define AT91_PIOA 0xffff0000 /* PIO Controller A */
#define AT91_PS 0xffff4000 /* Power Save */
#define AT91_WD 0xffff8000 /* Watchdog Timer */
/*
* The AT91x40 series doesn't have a debug unit like the other AT91 parts.
* But it does have a chip identify register and extension ID, so define at
* least these here.
*/
#define AT91_DBGU_CIDR (AT91_SF + 0) /* CIDR in PS segment */
#define AT91_DBGU_EXID (AT91_SF + 4) /* EXID in PS segment */
/*
* Support defines for the simple Power Controller module.
*/
#define AT91_PS_CR (AT91_PS + 0) /* PS Control register */
#define AT91_PS_CR_CPU (1 << 0) /* CPU clock disable bit */
#define AT91X40_MASTER_CLOCK 40000000
#endif /* AT91X40_H */

1
arch/arm/mach-at91/include/mach/cpu.h
View File

@ -62,7 +62,6 @@
#define ARCH_EXID_SAMA5D43 0x00000003
#define ARCH_EXID_SAMA5D44 0x00000004
#define ARCH_FAMILY_AT91X92 0x09200000
#define ARCH_FAMILY_AT91SAM9 0x01900000
#define ARCH_FAMILY_AT91SAM9XE 0x02900000

5
arch/arm/mach-at91/include/mach/hardware.h
View File

@ -24,9 +24,6 @@
/* sama5d4 */
#define AT91_BASE_DBGU2 0xfc069000
#if defined(CONFIG_ARCH_AT91X40)
#include <mach/at91x40.h>
#else
#include <mach/at91rm9200.h>
#include <mach/at91sam9260.h>
#include <mach/at91sam9261.h>
@ -51,8 +48,6 @@
*/
#define AT91_BASE_SYS 0xffffc000
#endif
/*
* On sama5d4 there is no system controller, we map some needed peripherals
*/

7
arch/arm/mach-at91/include/mach/uncompress.h
View File

@ -31,7 +31,6 @@
void __iomem *at91_uart;
#if !defined(CONFIG_ARCH_AT91X40)
static const u32 uarts_rm9200[] = {
AT91_BASE_DBGU0,
AT91RM9200_BASE_US0,
@ -188,12 +187,6 @@ static inline void arch_decomp_setup(void)
at91_uart = NULL;
}
#else
static inline void arch_decomp_setup(void)
{
at91_uart = NULL;
}
#endif
/*
* The following code assumes the serial port has already been

2
arch/arm/mach-at91/setup.c
View File

@ -418,7 +418,7 @@ void __init at91_ioremap_matrix(u32 base_addr)
panic(pr_fmt("Impossible to ioremap at91_matrix_base\n"));
}
#if defined(CONFIG_OF) && !defined(CONFIG_ARCH_AT91X40)
#if defined(CONFIG_OF)
static struct of_device_id ramc_ids[] = {
{ .compatible = "atmel,at91rm9200-sdramc", .data = at91rm9200_standby },
{ .compatible = "atmel,at91sam9260-sdramc", .data = at91sam9_sdram_standby },

2
drivers/rtc/Kconfig
View File

@ -1110,7 +1110,7 @@ config RTC_DRV_AT91RM9200
config RTC_DRV_AT91SAM9
tristate "AT91SAM9x/AT91CAP9 RTT as RTC"
depends on ARCH_AT91 && !(ARCH_AT91RM9200 || ARCH_AT91X40)
depends on ARCH_AT91 && !ARCH_AT91RM9200
help
RTC driver for the Atmel AT91SAM9x and AT91CAP9 internal RTT
(Real Time Timer). These timers are powered by the backup power