forked from Minki/linux
mtd: add device-tree support to spear_smi
This patch adds support to configure the SPEAr SMI driver via device-tree instead of platform_data. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
This commit is contained in:
Stefan Roese
David Woodhouse
parent
f7e3dd8f48
commit
6551ab5d30
31
Documentation/devicetree/bindings/mtd/spear_smi.txt
Normal file
31
Documentation/devicetree/bindings/mtd/spear_smi.txt
Normal file
@ -0,0 +1,31 @@
|
||||
* SPEAr SMI
|
||||
|
||||
Required properties:
|
||||
- compatible : "st,spear600-smi"
|
||||
- reg : Address range of the mtd chip
|
||||
- #address-cells, #size-cells : Must be present if the device has sub-nodes
|
||||
representing partitions.
|
||||
- interrupt-parent: Should be the phandle for the interrupt controller
|
||||
that services interrupts for this device
|
||||
- interrupts: Should contain the STMMAC interrupts
|
||||
- clock-rate : Functional clock rate of SMI in Hz
|
||||
|
||||
Optional properties:
|
||||
- st,smi-fast-mode : Flash supports read in fast mode
|
||||
|
||||
Example:
|
||||
|
||||
smi: flash@fc000000 {
|
||||
compatible = "st,spear600-smi";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = <0xfc000000 0x1000>;
|
||||
interrupt-parent = <&vic1>;
|
||||
interrupts = <12>;
|
||||
clock-rate = <50000000>; /* 50MHz */
|
||||
|
||||
flash@f8000000 {
|
||||
st,smi-fast-mode;
|
||||
...
|
||||
};
|
||||
};
|
||||
@ -33,9 +33,8 @@
|
||||
#include <linux/sched.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/wait.h>
|
||||
|
||||
/* max possible slots for serial-nor flash chip in the SMI controller */
|
||||
#define MAX_NUM_FLASH_CHIP 4
|
||||
#include <linux/of.h>
|
||||
#include <linux/of_address.h>
|
||||
|
||||
/* SMI clock rate */
|
||||
#define SMI_MAX_CLOCK_FREQ 50000000 /* 50 MHz */
|
||||
@ -748,9 +747,63 @@ err_probe:
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int spear_smi_setup_banks(struct platform_device *pdev, u32 bank)
|
||||
|
||||
#ifdef CONFIG_OF
|
||||
static int __devinit spear_smi_probe_config_dt(struct platform_device *pdev,
|
||||
struct device_node *np)
|
||||
{
|
||||
struct spear_smi_plat_data *pdata = dev_get_platdata(&pdev->dev);
|
||||
struct device_node *pp = NULL;
|
||||
const __be32 *addr;
|
||||
u32 val;
|
||||
int len;
|
||||
int i = 0;
|
||||
|
||||
if (!np)
|
||||
return -ENODEV;
|
||||
|
||||
of_property_read_u32(np, "clock-rate", &val);
|
||||
pdata->clk_rate = val;
|
||||
|
||||
pdata->board_flash_info = devm_kzalloc(&pdev->dev,
|
||||
sizeof(*pdata->board_flash_info),
|
||||
GFP_KERNEL);
|
||||
|
||||
/* Fill structs for each subnode (flash device) */
|
||||
while ((pp = of_get_next_child(np, pp))) {
|
||||
struct spear_smi_flash_info *flash_info;
|
||||
|
||||
flash_info = &pdata->board_flash_info[i];
|
||||
pdata->np[i] = pp;
|
||||
|
||||
/* Read base-addr and size from DT */
|
||||
addr = of_get_property(pp, "reg", &len);
|
||||
pdata->board_flash_info->mem_base = be32_to_cpup(&addr[0]);
|
||||
pdata->board_flash_info->size = be32_to_cpup(&addr[1]);
|
||||
|
||||
if (of_get_property(pp, "st,smi-fast-mode", NULL))
|
||||
pdata->board_flash_info->fast_mode = 1;
|
||||
|
||||
i++;
|
||||
}
|
||||
|
||||
pdata->num_flashes = i;
|
||||
|
||||
return 0;
|
||||
}
|
||||
#else
|
||||
static int __devinit spear_smi_probe_config_dt(struct platform_device *pdev,
|
||||
struct device_node *np)
|
||||
{
|
||||
return -ENOSYS;
|
||||
}
|
||||
#endif
|
||||
|
||||
static int spear_smi_setup_banks(struct platform_device *pdev,
|
||||
u32 bank, struct device_node *np)
|
||||
{
|
||||
struct spear_smi *dev = platform_get_drvdata(pdev);
|
||||
struct mtd_part_parser_data ppdata = {};
|
||||
struct spear_smi_flash_info *flash_info;
|
||||
struct spear_smi_plat_data *pdata;
|
||||
struct spear_snor_flash *flash;
|
||||
@ -816,11 +869,16 @@ static int spear_smi_setup_banks(struct platform_device *pdev, u32 bank)
|
||||
dev_info(&dev->pdev->dev, ".erasesize = 0x%x(%uK)\n",
|
||||
flash->mtd.erasesize, flash->mtd.erasesize / 1024);
|
||||
|
||||
#ifndef CONFIG_OF
|
||||
if (flash_info->partitions) {
|
||||
parts = flash_info->partitions;
|
||||
count = flash_info->nr_partitions;
|
||||
}
|
||||
ret = mtd_device_parse_register(&flash->mtd, NULL, NULL, parts, count);
|
||||
#endif
|
||||
ppdata.of_node = np;
|
||||
|
||||
ret = mtd_device_parse_register(&flash->mtd, NULL, &ppdata, parts,
|
||||
count);
|
||||
if (ret) {
|
||||
dev_err(&dev->pdev->dev, "Err MTD partition=%d\n", ret);
|
||||
goto err_map;
|
||||
@ -847,17 +905,34 @@ err_probe:
|
||||
*/
|
||||
static int __devinit spear_smi_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct spear_smi_plat_data *pdata;
|
||||
struct device_node *np = pdev->dev.of_node;
|
||||
struct spear_smi_plat_data *pdata = NULL;
|
||||
struct spear_smi *dev;
|
||||
struct resource *smi_base;
|
||||
int irq, ret = 0;
|
||||
int i;
|
||||
|
||||
pdata = dev_get_platdata(&pdev->dev);
|
||||
if (pdata < 0) {
|
||||
ret = -ENODEV;
|
||||
dev_err(&pdev->dev, "no platform data\n");
|
||||
goto err;
|
||||
if (np) {
|
||||
pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
|
||||
if (!pdata) {
|
||||
pr_err("%s: ERROR: no memory", __func__);
|
||||
ret = -ENOMEM;
|
||||
goto err;
|
||||
}
|
||||
pdev->dev.platform_data = pdata;
|
||||
ret = spear_smi_probe_config_dt(pdev, np);
|
||||
if (ret) {
|
||||
ret = -ENODEV;
|
||||
dev_err(&pdev->dev, "no platform data\n");
|
||||
goto err;
|
||||
}
|
||||
} else {
|
||||
pdata = dev_get_platdata(&pdev->dev);
|
||||
if (pdata < 0) {
|
||||
ret = -ENODEV;
|
||||
dev_err(&pdev->dev, "no platform data\n");
|
||||
goto err;
|
||||
}
|
||||
}
|
||||
|
||||
smi_base = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||
@ -932,7 +1007,7 @@ static int __devinit spear_smi_probe(struct platform_device *pdev)
|
||||
|
||||
/* loop for each serial nor-flash which is connected to smi */
|
||||
for (i = 0; i < dev->num_flashes; i++) {
|
||||
ret = spear_smi_setup_banks(pdev, i);
|
||||
ret = spear_smi_setup_banks(pdev, i, pdata->np[i]);
|
||||
if (ret) {
|
||||
dev_err(&dev->pdev->dev, "bank setup failed\n");
|
||||
goto err_bank_setup;
|
||||
@ -967,6 +1042,7 @@ err:
|
||||
static int __devexit spear_smi_remove(struct platform_device *pdev)
|
||||
{
|
||||
struct spear_smi *dev;
|
||||
struct spear_smi_plat_data *pdata;
|
||||
struct spear_snor_flash *flash;
|
||||
struct resource *smi_base;
|
||||
int ret;
|
||||
@ -978,6 +1054,8 @@ static int __devexit spear_smi_remove(struct platform_device *pdev)
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
pdata = dev_get_platdata(&pdev->dev);
|
||||
|
||||
/* clean up for all nor flash */
|
||||
for (i = 0; i < dev->num_flashes; i++) {
|
||||
flash = dev->flash[i];
|
||||
@ -1031,11 +1109,20 @@ int spear_smi_resume(struct platform_device *pdev)
|
||||
return ret;
|
||||
}
|
||||
|
||||
#ifdef CONFIG_OF
|
||||
static const struct of_device_id spear_smi_id_table[] = {
|
||||
{ .compatible = "st,spear600-smi" },
|
||||
{}
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, spear_smi_id_table);
|
||||
#endif
|
||||
|
||||
static struct platform_driver spear_smi_driver = {
|
||||
.driver = {
|
||||
.name = "smi",
|
||||
.bus = &platform_bus_type,
|
||||
.owner = THIS_MODULE,
|
||||
.of_match_table = of_match_ptr(spear_smi_id_table),
|
||||
},
|
||||
.probe = spear_smi_probe,
|
||||
.remove = __devexit_p(spear_smi_remove),
|
||||
|
||||
@ -14,6 +14,10 @@
|
||||
#include <linux/mtd/mtd.h>
|
||||
#include <linux/mtd/partitions.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/of.h>
|
||||
|
||||
/* max possible slots for serial-nor flash chip in the SMI controller */
|
||||
#define MAX_NUM_FLASH_CHIP 4
|
||||
|
||||
/* macro to define partitions for flash devices */
|
||||
#define DEFINE_PARTS(n, of, s) \
|
||||
@ -55,6 +59,7 @@ struct spear_smi_plat_data {
|
||||
unsigned long clk_rate;
|
||||
int num_flashes;
|
||||
struct spear_smi_flash_info *board_flash_info;
|
||||
struct device_node *np[MAX_NUM_FLASH_CHIP];
|
||||
};
|
||||
|
||||
#endif /* __MTD_SPEAR_SMI_H */
|
||||
|
||||
Loading…
Reference in New Issue
Block a user