leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity

regulator: max8925: fix enabled/disabled judgement mistake

Browse Source 
Max8925 ldo status should be determined by two factors:
1. power up/down sequence selection(LDOCTL[4:2]).
2. i2c enable bit(LDOCTL[0]).

Max8925 ldo support two types of power up/down sequence:
1. flexible sequence(LDOCTL[4:2] = 0~6).
2. i2c sequence(LDOCTL[4:2] = 7).

With flexible sequence selected, the ldo is enabled during power up by default.
With i2c sequence selected, the ldo is controlled by the i2c enable bit(LDOCTL[0]).

Signed-off-by: Kevin Liu <kliu5@marvell.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
This commit is contained in:
Kevin Liu 2012-01-04 15:12:04 +08:00 committed by Mark Brown
parent e1de2f4234
commit 65364e9ab9
1 changed files with 20 additions and 13 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

33
drivers/regulator/max8925-regulator.c
View File

@ -24,9 +24,13 @@
#define SD1_DVM_SHIFT 5 /* SDCTL1 bit5 */
#define SD1_DVM_EN 6 /* SDV1 bit 6 */
/* bit definitions in SD & LDO control registers */
#define OUT_ENABLE 0x1f /* Power U/D sequence as I2C */
#define OUT_DISABLE 0x1e /* Power U/D sequence as I2C */
/* bit definitions in LDO control registers */
#define LDO_SEQ_I2C 0x7 /* Power U/D by i2c */
#define LDO_SEQ_MASK 0x7 /* Power U/D sequence mask */
#define LDO_SEQ_SHIFT 2 /* Power U/D sequence offset */
#define LDO_I2C_EN 0x1 /* Enable by i2c */
#define LDO_I2C_EN_MASK 0x1 /* Enable mask by i2c */
#define LDO_I2C_EN_SHIFT 0 /* Enable offset by i2c */
struct max8925_regulator_info {
struct regulator_desc desc;
@ -40,7 +44,6 @@ struct max8925_regulator_info {
int vol_reg;
int vol_shift;
int vol_nbits;
int enable_bit;
int enable_reg;
};
@ -98,8 +101,10 @@ static int max8925_enable(struct regulator_dev *rdev)
struct max8925_regulator_info *info = rdev_get_drvdata(rdev);
return max8925_set_bits(info->i2c, info->enable_reg,
OUT_ENABLE << info->enable_bit,
OUT_ENABLE << info->enable_bit);
LDO_SEQ_MASK << LDO_SEQ_SHIFT |
LDO_I2C_EN_MASK << LDO_I2C_EN_SHIFT,
LDO_SEQ_I2C << LDO_SEQ_SHIFT |
LDO_I2C_EN << LDO_I2C_EN_SHIFT);
}
static int max8925_disable(struct regulator_dev *rdev)
@ -107,20 +112,24 @@ static int max8925_disable(struct regulator_dev *rdev)
struct max8925_regulator_info *info = rdev_get_drvdata(rdev);
return max8925_set_bits(info->i2c, info->enable_reg,
OUT_ENABLE << info->enable_bit,
OUT_DISABLE << info->enable_bit);
LDO_SEQ_MASK << LDO_SEQ_SHIFT |
LDO_I2C_EN_MASK << LDO_I2C_EN_SHIFT,
LDO_SEQ_I2C << LDO_SEQ_SHIFT);
}
static int max8925_is_enabled(struct regulator_dev *rdev)
{
struct max8925_regulator_info *info = rdev_get_drvdata(rdev);
int ret;
int ldo_seq, ret;
ret = max8925_reg_read(info->i2c, info->enable_reg);
if (ret < 0)
return ret;
return ret & (1 << info->enable_bit);
ldo_seq = (ret >> LDO_SEQ_SHIFT) & LDO_SEQ_MASK;
if (ldo_seq != LDO_SEQ_I2C)
return 1;
else
return ret & (LDO_I2C_EN_MASK << LDO_I2C_EN_SHIFT);
}
static int max8925_set_dvm_voltage(struct regulator_dev *rdev, int uV)
@ -188,7 +197,6 @@ static struct regulator_ops max8925_regulator_ldo_ops = {
.vol_shift = 0, \
.vol_nbits = 6, \
.enable_reg = MAX8925_SDCTL##_id, \
.enable_bit = 0, \
}
#define MAX8925_LDO(_id, min, max, step) \
@ -207,7 +215,6 @@ static struct regulator_ops max8925_regulator_ldo_ops = {
.vol_shift = 0, \
.vol_nbits = 6, \
.enable_reg = MAX8925_LDOCTL##_id, \
.enable_bit = 0, \
}
static struct max8925_regulator_info max8925_regulator_info[] = {