leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity

MIPS: Alchemy: Extended DB1200 board support.

Browse Source 
Create own directory for DB1200 code and update it with new features.

- SPI support:
  - tmp121 temperature sensor
  - SPI flash on DB1200
- I2C support
  - NE1619 sensor
  - AT24 eeprom
- I2C/SPI can be selected at boot time via switch S6.8
- Carddetect IRQs for SD cards.
- gen_nand based NAND support.
- hexleds count sleep/wake transitions.

Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Cc: Linux-MIPS <linux-mips@linux-mips.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This commit is contained in:
Manuel Lauss 2009-11-02 21:21:43 +01:00 committed by Ralf Baechle
parent 206aa6cdad
commit 63323ec54a
8 changed files with 654 additions and 75 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
arch/mips/alchemy/common/reset.c
View File

@ -164,9 +164,6 @@ void au1000_halt(void)
#ifdef CONFIG_MIPS_MIRAGE
gpio_direction_output(210, 1);
#endif
#ifdef CONFIG_MIPS_DB1200
au_writew(au_readw(0xB980001C) | (1 << 14), 0xB980001C);
#endif
#ifdef CONFIG_PM
au_sleep();

2
arch/mips/alchemy/devboards/Makefile
View File

@ -11,7 +11,7 @@ obj-$(CONFIG_MIPS_PB1500) += pb1500/
obj-$(CONFIG_MIPS_PB1550) += pb1550/
obj-$(CONFIG_MIPS_DB1000) += db1x00/
obj-$(CONFIG_MIPS_DB1100) += db1x00/
obj-$(CONFIG_MIPS_DB1200) += pb1200/
obj-$(CONFIG_MIPS_DB1200) += db1200/
obj-$(CONFIG_MIPS_DB1500) += db1x00/
obj-$(CONFIG_MIPS_DB1550) += db1x00/
obj-$(CONFIG_MIPS_BOSPORUS) += db1x00/

1
arch/mips/alchemy/devboards/db1200/Makefile Normal file
View File

@ -0,0 +1 @@
obj-y += setup.o platform.o

510
arch/mips/alchemy/devboards/db1200/platform.c Normal file
View File

@ -0,0 +1,510 @@
/*
* DBAu1200 board platform device registration
*
* Copyright (C) 2008-2009 Manuel Lauss
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/dma-mapping.h>
#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/leds.h>
#include <linux/mmc/host.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/platform_device.h>
#include <linux/serial_8250.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#include <linux/smc91x.h>
#include <asm/mach-au1x00/au1100_mmc.h>
#include <asm/mach-au1x00/au1xxx_dbdma.h>
#include <asm/mach-au1x00/au1550_spi.h>
#include <asm/mach-db1x00/bcsr.h>
#include <asm/mach-db1x00/db1200.h>
#include "../platform.h"
static struct mtd_partition db1200_spiflash_parts[] = {
{
.name = "DB1200 SPI flash",
.offset = 0,
.size = MTDPART_SIZ_FULL,
},
};
static struct flash_platform_data db1200_spiflash_data = {
.name = "s25fl001",
.parts = db1200_spiflash_parts,
.nr_parts = ARRAY_SIZE(db1200_spiflash_parts),
.type = "m25p10",
};
static struct spi_board_info db1200_spi_devs[] __initdata = {
{
/* TI TMP121AIDBVR temp sensor */
.modalias = "tmp121",
.max_speed_hz = 2000000,
.bus_num = 0,
.chip_select = 0,
.mode = 0,
},
{
/* Spansion S25FL001D0FMA SPI flash */
.modalias = "m25p80",
.max_speed_hz = 50000000,
.bus_num = 0,
.chip_select = 1,
.mode = 0,
.platform_data = &db1200_spiflash_data,
},
};
static struct i2c_board_info db1200_i2c_devs[] __initdata = {
{
/* AT24C04-10 I2C eeprom */
I2C_BOARD_INFO("24c04", 0x52),
},
{
/* Philips NE1619 temp/voltage sensor (adm1025 drv) */
I2C_BOARD_INFO("ne1619", 0x2d),
},
{
/* I2S audio codec WM8731 */
I2C_BOARD_INFO("wm8731", 0x1b),
},
};
/**********************************************************************/
static void au1200_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
unsigned int ctrl)
{
struct nand_chip *this = mtd->priv;
unsigned long ioaddr = (unsigned long)this->IO_ADDR_W;
ioaddr &= 0xffffff00;
if (ctrl & NAND_CLE) {
ioaddr += MEM_STNAND_CMD;
} else if (ctrl & NAND_ALE) {
ioaddr += MEM_STNAND_ADDR;
} else {
/* assume we want to r/w real data by default */
ioaddr += MEM_STNAND_DATA;
}
this->IO_ADDR_R = this->IO_ADDR_W = (void __iomem *)ioaddr;
if (cmd != NAND_CMD_NONE) {
__raw_writeb(cmd, this->IO_ADDR_W);
wmb();
}
}
static int au1200_nand_device_ready(struct mtd_info *mtd)
{
return __raw_readl((void __iomem *)MEM_STSTAT) & 1;
}
static const char *db1200_part_probes[] = { "cmdlinepart", NULL };
static struct mtd_partition db1200_nand_parts[] = {
{
.name = "NAND FS 0",
.offset = 0,
.size = 8 * 1024 * 1024,
},
{
.name = "NAND FS 1",
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL
},
};
struct platform_nand_data db1200_nand_platdata = {
.chip = {
.nr_chips = 1,
.chip_offset = 0,
.nr_partitions = ARRAY_SIZE(db1200_nand_parts),
.partitions = db1200_nand_parts,
.chip_delay = 20,
.part_probe_types = db1200_part_probes,
},
.ctrl = {
.dev_ready = au1200_nand_device_ready,
.cmd_ctrl = au1200_nand_cmd_ctrl,
},
};
static struct resource db1200_nand_res[] = {
[0] = {
.start = DB1200_NAND_PHYS_ADDR,
.end = DB1200_NAND_PHYS_ADDR + 0xff,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device db1200_nand_dev = {
.name = "gen_nand",
.num_resources = ARRAY_SIZE(db1200_nand_res),
.resource = db1200_nand_res,
.id = -1,
.dev = {
.platform_data = &db1200_nand_platdata,
}
};
/**********************************************************************/
static struct smc91x_platdata db1200_eth_data = {
.flags = SMC91X_NOWAIT | SMC91X_USE_16BIT,
.leda = RPC_LED_100_10,
.ledb = RPC_LED_TX_RX,
};
static struct resource db1200_eth_res[] = {
[0] = {
.start = DB1200_ETH_PHYS_ADDR,
.end = DB1200_ETH_PHYS_ADDR + 0xf,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = DB1200_ETH_INT,
.end = DB1200_ETH_INT,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device db1200_eth_dev = {
.dev = {
.platform_data = &db1200_eth_data,
},
.name = "smc91x",
.id = -1,
.num_resources = ARRAY_SIZE(db1200_eth_res),
.resource = db1200_eth_res,
};
/**********************************************************************/
static struct resource db1200_ide_res[] = {
[0] = {
.start = DB1200_IDE_PHYS_ADDR,
.end = DB1200_IDE_PHYS_ADDR + DB1200_IDE_PHYS_LEN - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = DB1200_IDE_INT,
.end = DB1200_IDE_INT,
.flags = IORESOURCE_IRQ,
}
};
static u64 ide_dmamask = DMA_32BIT_MASK;
static struct platform_device db1200_ide_dev = {
.name = "au1200-ide",
.id = 0,
.dev = {
.dma_mask = &ide_dmamask,
.coherent_dma_mask = DMA_32BIT_MASK,
},
.num_resources = ARRAY_SIZE(db1200_ide_res),
.resource = db1200_ide_res,
};
/**********************************************************************/
static struct platform_device db1200_rtc_dev = {
.name = "rtc-au1xxx",
.id = -1,
};
/**********************************************************************/
/* SD carddetects: they're supposed to be edge-triggered, but ack
* doesn't seem to work (CPLD Rev 2). Instead, the screaming one
* is disabled and its counterpart enabled. The 500ms timeout is
* because the carddetect isn't debounced in hardware.
*/
static irqreturn_t db1200_mmc_cd(int irq, void *ptr)
{
void(*mmc_cd)(struct mmc_host *, unsigned long);
if (irq == DB1200_SD0_INSERT_INT) {
disable_irq_nosync(DB1200_SD0_INSERT_INT);
enable_irq(DB1200_SD0_EJECT_INT);
} else {
disable_irq_nosync(DB1200_SD0_EJECT_INT);
enable_irq(DB1200_SD0_INSERT_INT);
}
/* link against CONFIG_MMC=m */
mmc_cd = symbol_get(mmc_detect_change);
if (mmc_cd) {
mmc_cd(ptr, msecs_to_jiffies(500));
symbol_put(mmc_detect_change);
}
return IRQ_HANDLED;
}
static int db1200_mmc_cd_setup(void *mmc_host, int en)
{
int ret;
if (en) {
ret = request_irq(DB1200_SD0_INSERT_INT, db1200_mmc_cd,
IRQF_DISABLED, "sd_insert", mmc_host);
if (ret)
goto out;
ret = request_irq(DB1200_SD0_EJECT_INT, db1200_mmc_cd,
IRQF_DISABLED, "sd_eject", mmc_host);
if (ret) {
free_irq(DB1200_SD0_INSERT_INT, mmc_host);
goto out;
}
if (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD0INSERT)
enable_irq(DB1200_SD0_EJECT_INT);
else
enable_irq(DB1200_SD0_INSERT_INT);
} else {
free_irq(DB1200_SD0_INSERT_INT, mmc_host);
free_irq(DB1200_SD0_EJECT_INT, mmc_host);
}
ret = 0;
out:
return ret;
}
static void db1200_mmc_set_power(void *mmc_host, int state)
{
if (state) {
bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_SD0PWR);
msleep(400); /* stabilization time */
} else
bcsr_mod(BCSR_BOARD, BCSR_BOARD_SD0PWR, 0);
}
static int db1200_mmc_card_readonly(void *mmc_host)
{
return (bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD0WP) ? 1 : 0;
}
static int db1200_mmc_card_inserted(void *mmc_host)
{
return (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD0INSERT) ? 1 : 0;
}
static void db1200_mmcled_set(struct led_classdev *led,
enum led_brightness brightness)
{
if (brightness != LED_OFF)
bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED0, 0);
else
bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED0);
}
static struct led_classdev db1200_mmc_led = {
.brightness_set = db1200_mmcled_set,
};
/* needed by arch/mips/alchemy/common/platform.c */
struct au1xmmc_platform_data au1xmmc_platdata[] = {
[0] = {
.cd_setup = db1200_mmc_cd_setup,
.set_power = db1200_mmc_set_power,
.card_inserted = db1200_mmc_card_inserted,
.card_readonly = db1200_mmc_card_readonly,
.led = &db1200_mmc_led,
},
};
/**********************************************************************/
static struct resource au1200_psc0_res[] = {
[0] = {
.start = PSC0_PHYS_ADDR,
.end = PSC0_PHYS_ADDR + 0x000fffff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AU1200_PSC0_INT,
.end = AU1200_PSC0_INT,
.flags = IORESOURCE_IRQ,
},
[2] = {
.start = DSCR_CMD0_PSC0_TX,
.end = DSCR_CMD0_PSC0_TX,
.flags = IORESOURCE_DMA,
},
[3] = {
.start = DSCR_CMD0_PSC0_RX,
.end = DSCR_CMD0_PSC0_RX,
.flags = IORESOURCE_DMA,
},
};
static struct platform_device db1200_i2c_dev = {
.name = "au1xpsc_smbus",
.id = 0, /* bus number */
.num_resources = ARRAY_SIZE(au1200_psc0_res),
.resource = au1200_psc0_res,
};
static void db1200_spi_cs_en(struct au1550_spi_info *spi, int cs, int pol)
{
if (cs)
bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_SPISEL);
else
bcsr_mod(BCSR_RESETS, BCSR_RESETS_SPISEL, 0);
}
static struct au1550_spi_info db1200_spi_platdata = {
.mainclk_hz = 50000000, /* PSC0 clock */
.num_chipselect = 2,
.activate_cs = db1200_spi_cs_en,
};
static u64 spi_dmamask = DMA_32BIT_MASK;
static struct platform_device db1200_spi_dev = {
.dev = {
.dma_mask = &spi_dmamask,
.coherent_dma_mask = DMA_32BIT_MASK,
.platform_data = &db1200_spi_platdata,
},
.name = "au1550-spi",
.id = 0, /* bus number */
.num_resources = ARRAY_SIZE(au1200_psc0_res),
.resource = au1200_psc0_res,
};
static struct platform_device *db1200_devs[] __initdata = {
NULL, /* PSC0, selected by S6.8 */
&db1200_ide_dev,
&db1200_eth_dev,
&db1200_rtc_dev,
&db1200_nand_dev,
};
static int __init db1200_dev_init(void)
{
unsigned long pfc;
unsigned short sw;
int swapped;
i2c_register_board_info(0, db1200_i2c_devs,
ARRAY_SIZE(db1200_i2c_devs));
spi_register_board_info(db1200_spi_devs,
ARRAY_SIZE(db1200_i2c_devs));
/* SWITCHES: S6.8 I2C/SPI selector (OFF=I2C ON=SPI)
*/
/* NOTE: GPIO215 controls OTG VBUS supply. In SPI mode however
* this pin is claimed by PSC0 (unused though, but pinmux doesn't
* allow to free it without crippling the SPI interface).
* As a result, in SPI mode, OTG simply won't work (PSC0 uses
* it as an input pin which is pulled high on the boards).
*/
pfc = __raw_readl((void __iomem *)SYS_PINFUNC) & ~SYS_PINFUNC_P0A;
/* switch off OTG VBUS supply */
gpio_request(215, "otg-vbus");
gpio_direction_output(215, 1);
printk(KERN_INFO "DB1200 device configuration:\n");
sw = bcsr_read(BCSR_SWITCHES);
if (sw & BCSR_SWITCHES_DIP_8) {
db1200_devs[0] = &db1200_i2c_dev;
bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC0MUX, 0);
pfc |= (2 << 17); /* GPIO2 block owns GPIO215 */
printk(KERN_INFO " S6.8 OFF: PSC0 mode I2C\n");
printk(KERN_INFO " OTG port VBUS supply available!\n");
} else {
db1200_devs[0] = &db1200_spi_dev;
bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_PSC0MUX);
pfc |= (1 << 17); /* PSC0 owns GPIO215 */
printk(KERN_INFO " S6.8 ON : PSC0 mode SPI\n");
printk(KERN_INFO " OTG port VBUS supply disabled\n");
}
__raw_writel(pfc, (void __iomem *)SYS_PINFUNC);
wmb();
db1x_register_pcmcia_socket(PCMCIA_ATTR_PSEUDO_PHYS,
PCMCIA_ATTR_PSEUDO_PHYS + 0x00040000 - 1,
PCMCIA_MEM_PSEUDO_PHYS,
PCMCIA_MEM_PSEUDO_PHYS + 0x00040000 - 1,
PCMCIA_IO_PSEUDO_PHYS,
PCMCIA_IO_PSEUDO_PHYS + 0x00001000 - 1,
DB1200_PC0_INT,
DB1200_PC0_INSERT_INT,
/*DB1200_PC0_STSCHG_INT*/0,
DB1200_PC0_EJECT_INT,
0);
db1x_register_pcmcia_socket(PCMCIA_ATTR_PSEUDO_PHYS + 0x00400000,
PCMCIA_ATTR_PSEUDO_PHYS + 0x00440000 - 1,
PCMCIA_MEM_PSEUDO_PHYS + 0x00400000,
PCMCIA_MEM_PSEUDO_PHYS + 0x00440000 - 1,
PCMCIA_IO_PSEUDO_PHYS + 0x00400000,
PCMCIA_IO_PSEUDO_PHYS + 0x00401000 - 1,
DB1200_PC1_INT,
DB1200_PC1_INSERT_INT,
/*DB1200_PC1_STSCHG_INT*/0,
DB1200_PC1_EJECT_INT,
1);
swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1200_SWAPBOOT;
db1x_register_norflash(64 << 20, 2, swapped);
return platform_add_devices(db1200_devs, ARRAY_SIZE(db1200_devs));
}
device_initcall(db1200_dev_init);
/* au1200fb calls these: STERBT EINEN TRAGISCHEN TOD!!! */
int board_au1200fb_panel(void)
{
return (bcsr_read(BCSR_SWITCHES) >> 8) & 0x0f;
}
int board_au1200fb_panel_init(void)
{
/* Apply power */
bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD |
BCSR_BOARD_LCDBL);
return 0;
}
int board_au1200fb_panel_shutdown(void)
{
/* Remove power */
bcsr_mod(BCSR_BOARD, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD |
BCSR_BOARD_LCDBL, 0);
return 0;
}

137
arch/mips/alchemy/devboards/db1200/setup.c Normal file
View File

@ -0,0 +1,137 @@
/*
* Alchemy/AMD/RMI DB1200 board setup.
*
* Licensed under the terms outlined in the file COPYING in the root of
* this source archive.
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/pm.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-db1x00/bcsr.h>
#include <asm/mach-db1x00/db1200.h>
#include <asm/processor.h>
#include <asm/reboot.h>
const char *get_system_type(void)
{
return "Alchemy Db1200";
}
static void board_power_off(void)
{
bcsr_write(BCSR_RESETS, 0);
bcsr_write(BCSR_SYSTEM, BCSR_SYSTEM_PWROFF | BCSR_SYSTEM_RESET);
}
void board_reset(void)
{
bcsr_write(BCSR_RESETS, 0);
bcsr_write(BCSR_SYSTEM, 0);
}
void __init board_setup(void)
{
unsigned long freq0, clksrc, div, pfc;
unsigned short whoami;
bcsr_init(DB1200_BCSR_PHYS_ADDR,
DB1200_BCSR_PHYS_ADDR + DB1200_BCSR_HEXLED_OFS);
whoami = bcsr_read(BCSR_WHOAMI);
printk(KERN_INFO "Alchemy/AMD/RMI DB1200 Board, CPLD Rev %d"
" Board-ID %d Daughtercard ID %d\n",
(whoami >> 4) & 0xf, (whoami >> 8) & 0xf, whoami & 0xf);
/* SMBus/SPI on PSC0, Audio on PSC1 */
pfc = __raw_readl((void __iomem *)SYS_PINFUNC);
pfc &= ~(SYS_PINFUNC_P0A | SYS_PINFUNC_P0B);
pfc &= ~(SYS_PINFUNC_P1A | SYS_PINFUNC_P1B | SYS_PINFUNC_FS3);
pfc |= SYS_PINFUNC_P1C; /* SPI is configured later */
__raw_writel(pfc, (void __iomem *)SYS_PINFUNC);
wmb();
/* Clock configurations: PSC0: ~50MHz via Clkgen0, derived from
* CPU clock; all other clock generators off/unused.
*/
div = (get_au1x00_speed() + 25000000) / 50000000;
if (div & 1)
div++;
div = ((div >> 1) - 1) & 0xff;
freq0 = div << SYS_FC_FRDIV0_BIT;
__raw_writel(freq0, (void __iomem *)SYS_FREQCTRL0);
wmb();
freq0 |= SYS_FC_FE0; /* enable F0 */
__raw_writel(freq0, (void __iomem *)SYS_FREQCTRL0);
wmb();
/* psc0_intclk comes 1:1 from F0 */
clksrc = SYS_CS_MUX_FQ0 << SYS_CS_ME0_BIT;
__raw_writel(clksrc, (void __iomem *)SYS_CLKSRC);
wmb();
pm_power_off = board_power_off;
_machine_halt = board_power_off;
_machine_restart = (void(*)(char *))board_reset;
}
/* use the hexleds to count the number of times the cpu has entered
* wait, the dots to indicate whether the CPU is currently idle or
* active (dots off = sleeping, dots on = working) for cases where
* the number doesn't change for a long(er) period of time.
*/
static void db1200_wait(void)
{
__asm__(" .set push \n"
" .set mips3 \n"
" .set noreorder \n"
" cache 0x14, 0(%0) \n"
" cache 0x14, 32(%0) \n"
" cache 0x14, 64(%0) \n"
/* dots off: we're about to call wait */
" lui $26, 0xb980 \n"
" ori $27, $0, 3 \n"
" sb $27, 0x18($26) \n"
" sync \n"
" nop \n"
" wait \n"
" nop \n"
" nop \n"
" nop \n"
" nop \n"
" nop \n"
/* dots on: there's work to do, increment cntr */
" lui $26, 0xb980 \n"
" sb $0, 0x18($26) \n"
" lui $26, 0xb9c0 \n"
" lb $27, 0($26) \n"
" addiu $27, $27, 1 \n"
" sb $27, 0($26) \n"
" sync \n"
" .set pop \n"
: : "r" (db1200_wait));
}
static int __init db1200_arch_init(void)
{
/* GPIO7 is low-level triggered CPLD cascade */
set_irq_type(AU1200_GPIO7_INT, IRQF_TRIGGER_LOW);
bcsr_init_irq(DB1200_INT_BEGIN, DB1200_INT_END, AU1200_GPIO7_INT);
/* do not autoenable these: CPLD has broken edge int handling,
* and the CD handler setup requires manual enabling to work
* around that.
*/
irq_to_desc(DB1200_SD0_INSERT_INT)->status |= IRQ_NOAUTOEN;
irq_to_desc(DB1200_SD0_EJECT_INT)->status |= IRQ_NOAUTOEN;
if (cpu_wait)
cpu_wait = db1200_wait;
return 0;
}
arch_initcall(db1200_arch_init);

9
arch/mips/alchemy/devboards/pb1200/board_setup.c
View File

@ -58,16 +58,9 @@ void __init board_setup(void)
{
char *argptr;
#ifdef CONFIG_MIPS_PB1200
printk(KERN_INFO "AMD Alchemy Pb1200 Board\n");
bcsr_init(PB1200_BCSR_PHYS_ADDR,
PB1200_BCSR_PHYS_ADDR + PB1200_BCSR_HEXLED_OFS);
#endif
#ifdef CONFIG_MIPS_DB1200
printk(KERN_INFO "AMD Alchemy Db1200 Board\n");
bcsr_init(DB1200_BCSR_PHYS_ADDR,
DB1200_BCSR_PHYS_ADDR + DB1200_BCSR_HEXLED_OFS);
#endif
argptr = prom_getcmdline();
#ifdef CONFIG_SERIAL_8250_CONSOLE
@ -149,7 +142,6 @@ void __init board_setup(void)
static int __init pb1200_init_irq(void)
{
#ifdef CONFIG_MIPS_PB1200
/* We have a problem with CPLD rev 3. */
if (BCSR_WHOAMI_CPLD(bcsr_read(BCSR_WHOAMI)) <= 3) {
printk(KERN_ERR "WARNING!!!\n");
@ -169,7 +161,6 @@ static int __init pb1200_init_irq(void)
printk(KERN_ERR "WARNING!!!\n");
panic("Game over. Your score is 0.");
}
#endif
set_irq_type(AU1200_GPIO7_INT, IRQF_TRIGGER_LOW);
bcsr_init_irq(PB1200_INT_BEGIN, PB1200_INT_END, AU1200_GPIO7_INT);

34
arch/mips/alchemy/devboards/pb1200/platform.c
View File

@ -68,7 +68,6 @@ static struct led_classdev pb1200mmc_led = {
.brightness_set = pb1200_mmcled_set,
};
#ifndef CONFIG_MIPS_DB1200
static void pb1200mmc1_set_power(void *mmc_host, int state)
{
if (state)
@ -88,7 +87,6 @@ static int pb1200mmc1_card_inserted(void *mmc_host)
{
return (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD1INSERT) ? 1 : 0;
}
#endif
const struct au1xmmc_platform_data au1xmmc_platdata[2] = {
[0] = {
@ -98,7 +96,6 @@ const struct au1xmmc_platform_data au1xmmc_platdata[2] = {
.cd_setup = NULL, /* use poll-timer in driver */
.led = &pb1200mmc_led,
},
#ifndef CONFIG_MIPS_DB1200
[1] = {
.set_power = pb1200mmc1_set_power,
.card_inserted = pb1200mmc1_card_inserted,
@ -106,7 +103,6 @@ const struct au1xmmc_platform_data au1xmmc_platdata[2] = {
.cd_setup = NULL, /* use poll-timer in driver */
.led = &pb1200mmc_led,
},
#endif
};
static struct resource ide_resources[] = {
@ -174,7 +170,6 @@ static int __init board_register_devices(void)
{
int swapped;
#ifdef CONFIG_MIPS_PB1200
db1x_register_pcmcia_socket(PCMCIA_ATTR_PSEUDO_PHYS,
PCMCIA_ATTR_PSEUDO_PHYS + 0x00040000 - 1,
PCMCIA_MEM_PSEUDO_PHYS,
@ -198,38 +193,9 @@ static int __init board_register_devices(void)
/*PB1200_PC1_STSCHG_INT*/0,
PB1200_PC1_EJECT_INT,
1);
#else
db1x_register_pcmcia_socket(PCMCIA_ATTR_PSEUDO_PHYS,
PCMCIA_ATTR_PSEUDO_PHYS + 0x00040000 - 1,
PCMCIA_MEM_PSEUDO_PHYS,
PCMCIA_MEM_PSEUDO_PHYS + 0x00040000 - 1,
PCMCIA_IO_PSEUDO_PHYS,
PCMCIA_IO_PSEUDO_PHYS + 0x00001000 - 1,
DB1200_PC0_INT,
DB1200_PC0_INSERT_INT,
/*DB1200_PC0_STSCHG_INT*/0,
DB1200_PC0_EJECT_INT,
0);
db1x_register_pcmcia_socket(PCMCIA_ATTR_PSEUDO_PHYS + 0x00400000,
PCMCIA_ATTR_PSEUDO_PHYS + 0x00440000 - 1,
PCMCIA_MEM_PSEUDO_PHYS + 0x00400000,
PCMCIA_MEM_PSEUDO_PHYS + 0x00440000 - 1,
PCMCIA_IO_PSEUDO_PHYS + 0x00400000,
PCMCIA_IO_PSEUDO_PHYS + 0x00401000 - 1,
DB1200_PC1_INT,
DB1200_PC1_INSERT_INT,
/*DB1200_PC1_STSCHG_INT*/0,
DB1200_PC1_EJECT_INT,
1);
#endif
swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1200_SWAPBOOT;
#ifdef CONFIG_MIPS_PB1200
db1x_register_norflash(128 * 1024 * 1024, 2, swapped);
#else
db1x_register_norflash(64 * 1024 * 1024, 2, swapped);
#endif
return platform_add_devices(board_platform_devices,
ARRAY_SIZE(board_platform_devices));

33
arch/mips/include/asm/mach-db1x00/db1200.h
View File

@ -28,24 +28,6 @@
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-au1x00/au1xxx_psc.h>
#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC1_TX
#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC1_RX
/*
* SPI and SMB are muxed on the DBAu1200 board.
* Refer to board documentation.
*/
#define SPI_PSC_BASE PSC0_BASE_ADDR
#define SMBUS_PSC_BASE PSC0_BASE_ADDR
/*
* AC'97 and I2S are muxed on the DBAu1200 board.
* Refer to board documentation.
*/
#define AC97_PSC_BASE PSC1_BASE_ADDR
#define I2S_PSC_BASE PSC1_BASE_ADDR
/* Bit positions for the different interrupt sources */
#define BCSR_INT_IDE 0x0001
#define BCSR_INT_ETH 0x0002
@ -62,17 +44,15 @@
#define BCSR_INT_SD0INSERT 0x1000
#define BCSR_INT_SD0EJECT 0x2000
#define SMC91C111_PHYS_ADDR 0x19000300
#define SMC91C111_INT DB1200_ETH_INT
#define IDE_PHYS_ADDR 0x18800000
#define IDE_REG_SHIFT 5
#define IDE_PHYS_LEN (16 << IDE_REG_SHIFT)
#define IDE_INT DB1200_IDE_INT
#define IDE_DDMA_REQ DSCR_CMD0_DMA_REQ1
#define IDE_RQSIZE 128
#define NAND_PHYS_ADDR 0x20000000
#define DB1200_IDE_PHYS_ADDR IDE_PHYS_ADDR
#define DB1200_IDE_PHYS_LEN (16 << IDE_REG_SHIFT)
#define DB1200_ETH_PHYS_ADDR 0x19000300
#define DB1200_NAND_PHYS_ADDR 0x20000000
/*
* External Interrupts for DBAu1200 as of 8/6/2004.
@ -82,7 +62,7 @@
* Example: IDE bis pos is = 64 - 64
* ETH bit pos is = 65 - 64
*/
enum external_pb1200_ints {
enum external_db1200_ints {
DB1200_INT_BEGIN = AU1000_MAX_INTR + 1,
DB1200_IDE_INT = DB1200_INT_BEGIN,
@ -103,7 +83,4 @@ enum external_pb1200_ints {
DB1200_INT_END = DB1200_INT_BEGIN + 15,
};
/* NAND chip select */
#define NAND_CS 1
#endif /* __ASM_DB1200_H */