leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Merge branches 'for-3.13/upstream-fixes', 'for-3.14/i2c-hid', 'for-3.14/sensor-hub', 'for-3.14/sony' and 'for-3.14/upstream' into for-linus

Browse Source
This commit is contained in:
Jiri Kosina 2014-01-22 15:40:14 +01:00
commit 62813858fb
2408 changed files with 54148 additions and 22247 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

5
CREDITS
View File

@ -655,6 +655,11 @@ S: Stanford University
S: Stanford, California 94305
S: USA
N: Carlos Chinea
E: carlos.chinea@nokia.com
E: cch.devel@gmail.com
D: Author of HSI Subsystem
N: Randolph Chung
E: tausq@debian.org
D: Linux/PA-RISC hacker

13
Documentation/ABI/stable/sysfs-driver-ib_srp
View File

@ -61,6 +61,12 @@ Description: Interface for making ib_srp connect to a new target.
interrupt is handled by a different CPU then the comp_vector
parameter can be used to spread the SRP completion workload
over multiple CPU's.
* tl_retry_count, a number in the range 2..7 specifying the
IB RC retry count.
* queue_size, the maximum number of commands that the
initiator is allowed to queue per SCSI host. The default
value for this parameter is 62. The lowest supported value
is 2.
What: /sys/class/infiniband_srp/srp-<hca>-<port_number>/ibdev
Date: January 2, 2006
@ -153,6 +159,13 @@ Contact: linux-rdma@vger.kernel.org
Description: InfiniBand service ID used for establishing communication with
the SRP target.
What: /sys/class/scsi_host/host<n>/sgid
Date: February 1, 2014
KernelVersion: 3.13
Contact: linux-rdma@vger.kernel.org
Description: InfiniBand GID of the source port used for communication with
the SRP target.
What: /sys/class/scsi_host/host<n>/zero_req_lim
Date: September 20, 2006
KernelVersion: 2.6.18

39
Documentation/ABI/stable/sysfs-transport-srp
View File

@ -5,6 +5,24 @@ Contact: linux-scsi@vger.kernel.org, linux-rdma@vger.kernel.org
Description: Instructs an SRP initiator to disconnect from a target and to
remove all LUNs imported from that target.
What: /sys/class/srp_remote_ports/port-<h>:<n>/dev_loss_tmo
Date: February 1, 2014
KernelVersion: 3.13
Contact: linux-scsi@vger.kernel.org, linux-rdma@vger.kernel.org
Description: Number of seconds the SCSI layer will wait after a transport
layer error has been observed before removing a target port.
Zero means immediate removal. Setting this attribute to "off"
will disable the dev_loss timer.
What: /sys/class/srp_remote_ports/port-<h>:<n>/fast_io_fail_tmo
Date: February 1, 2014
KernelVersion: 3.13
Contact: linux-scsi@vger.kernel.org, linux-rdma@vger.kernel.org
Description: Number of seconds the SCSI layer will wait after a transport
layer error has been observed before failing I/O. Zero means
failing I/O immediately. Setting this attribute to "off" will
disable the fast_io_fail timer.
What: /sys/class/srp_remote_ports/port-<h>:<n>/port_id
Date: June 27, 2007
KernelVersion: 2.6.24
@ -12,8 +30,29 @@ Contact: linux-scsi@vger.kernel.org
Description: 16-byte local SRP port identifier in hexadecimal format. An
example: 4c:49:4e:55:58:20:56:49:4f:00:00:00:00:00:00:00.
What: /sys/class/srp_remote_ports/port-<h>:<n>/reconnect_delay
Date: February 1, 2014
KernelVersion: 3.13
Contact: linux-scsi@vger.kernel.org, linux-rdma@vger.kernel.org
Description: Number of seconds the SCSI layer will wait after a reconnect
attempt failed before retrying. Setting this attribute to
"off" will disable time-based reconnecting.
What: /sys/class/srp_remote_ports/port-<h>:<n>/roles
Date: June 27, 2007
KernelVersion: 2.6.24
Contact: linux-scsi@vger.kernel.org
Description: Role of the remote port. Either "SRP Initiator" or "SRP Target".
What: /sys/class/srp_remote_ports/port-<h>:<n>/state
Date: February 1, 2014
KernelVersion: 3.13
Contact: linux-scsi@vger.kernel.org, linux-rdma@vger.kernel.org
Description: State of the transport layer used for communication with the
remote port. "running" if the transport layer is operational;
"blocked" if a transport layer error has been encountered but
the fast_io_fail_tmo timer has not yet fired; "fail-fast"
after the fast_io_fail_tmo timer has fired and before the
"dev_loss_tmo" timer has fired; "lost" after the
"dev_loss_tmo" timer has fired and before the port is finally
removed.

11
Documentation/Changes
View File

@ -196,13 +196,6 @@ chmod 0644 /dev/cpu/microcode
as root before you can use this. You'll probably also want to
get the user-space microcode_ctl utility to use with this.
Powertweak
----------
If you are running v0.1.17 or earlier, you should upgrade to
version v0.99.0 or higher. Running old versions may cause problems
with programs using shared memory.
udev
----
udev is a userspace application for populating /dev dynamically with
@ -366,10 +359,6 @@ Intel P6 microcode
------------------
o <http://www.urbanmyth.org/microcode/>
Powertweak
----------
o <http://powertweak.sourceforge.net/>
udev
----
o <http://www.kernel.org/pub/linux/utils/kernel/hotplug/udev.html>

2
Documentation/DocBook/device-drivers.tmpl
View File

@ -58,7 +58,7 @@
</sect1>
<sect1><title>Wait queues and Wake events</title>
!Iinclude/linux/wait.h
!Ekernel/wait.c
!Ekernel/sched/wait.c
</sect1>
<sect1><title>High-resolution timers</title>
!Iinclude/linux/ktime.h

8
Documentation/DocBook/media/v4l/vidioc-expbuf.xml
View File

@ -73,7 +73,8 @@ range from zero to the maximal number of valid planes for the currently active
format. For the single-planar API, applications must set <structfield> plane
</structfield> to zero. Additional flags may be posted in the <structfield>
flags </structfield> field. Refer to a manual for open() for details.
Currently only O_CLOEXEC is supported. All other fields must be set to zero.
Currently only O_CLOEXEC, O_RDONLY, O_WRONLY, and O_RDWR are supported. All
other fields must be set to zero.
In the case of multi-planar API, every plane is exported separately using
multiple <constant> VIDIOC_EXPBUF </constant> calls. </para>
@ -170,8 +171,9 @@ multi-planar API. Otherwise this value must be set to zero. </entry>
<entry>__u32</entry>
<entry><structfield>flags</structfield></entry>
<entry>Flags for the newly created file, currently only <constant>
O_CLOEXEC </constant> is supported, refer to the manual of open() for more
details.</entry>
O_CLOEXEC </constant>, <constant>O_RDONLY</constant>, <constant>O_WRONLY
</constant>, and <constant>O_RDWR</constant> are supported, refer to the manual
of open() for more details.</entry>
</row>
<row>
<entry>__s32</entry>

574
Documentation/assoc_array.txt Normal file
View File

@ -0,0 +1,574 @@
========================================
GENERIC ASSOCIATIVE ARRAY IMPLEMENTATION
========================================
Contents:
- Overview.
- The public API.
- Edit script.
- Operations table.
- Manipulation functions.
- Access functions.
- Index key form.
- Internal workings.
- Basic internal tree layout.
- Shortcuts.
- Splitting and collapsing nodes.
- Non-recursive iteration.
- Simultaneous alteration and iteration.
========
OVERVIEW
========
This associative array implementation is an object container with the following
properties:
(1) Objects are opaque pointers. The implementation does not care where they
point (if anywhere) or what they point to (if anything).
[!] NOTE: Pointers to objects _must_ be zero in the least significant bit.
(2) Objects do not need to contain linkage blocks for use by the array. This
permits an object to be located in multiple arrays simultaneously.
Rather, the array is made up of metadata blocks that point to objects.
(3) Objects require index keys to locate them within the array.
(4) Index keys must be unique. Inserting an object with the same key as one
already in the array will replace the old object.
(5) Index keys can be of any length and can be of different lengths.
(6) Index keys should encode the length early on, before any variation due to
length is seen.
(7) Index keys can include a hash to scatter objects throughout the array.
(8) The array can iterated over. The objects will not necessarily come out in
key order.
(9) The array can be iterated over whilst it is being modified, provided the
RCU readlock is being held by the iterator. Note, however, under these
circumstances, some objects may be seen more than once. If this is a
problem, the iterator should lock against modification. Objects will not
be missed, however, unless deleted.
(10) Objects in the array can be looked up by means of their index key.
(11) Objects can be looked up whilst the array is being modified, provided the
RCU readlock is being held by the thread doing the look up.
The implementation uses a tree of 16-pointer nodes internally that are indexed
on each level by nibbles from the index key in the same manner as in a radix
tree. To improve memory efficiency, shortcuts can be emplaced to skip over
what would otherwise be a series of single-occupancy nodes. Further, nodes
pack leaf object pointers into spare space in the node rather than making an
extra branch until as such time an object needs to be added to a full node.
==============
THE PUBLIC API
==============
The public API can be found in <linux/assoc_array.h>. The associative array is
rooted on the following structure:
struct assoc_array {
...
};
The code is selected by enabling CONFIG_ASSOCIATIVE_ARRAY.
EDIT SCRIPT
-----------
The insertion and deletion functions produce an 'edit script' that can later be
applied to effect the changes without risking ENOMEM. This retains the
preallocated metadata blocks that will be installed in the internal tree and
keeps track of the metadata blocks that will be removed from the tree when the
script is applied.
This is also used to keep track of dead blocks and dead objects after the
script has been applied so that they can be freed later. The freeing is done
after an RCU grace period has passed - thus allowing access functions to
proceed under the RCU read lock.
The script appears as outside of the API as a pointer of the type:
struct assoc_array_edit;
There are two functions for dealing with the script:
(1) Apply an edit script.
void assoc_array_apply_edit(struct assoc_array_edit *edit);
This will perform the edit functions, interpolating various write barriers
to permit accesses under the RCU read lock to continue. The edit script
will then be passed to call_rcu() to free it and any dead stuff it points
to.
(2) Cancel an edit script.
void assoc_array_cancel_edit(struct assoc_array_edit *edit);
This frees the edit script and all preallocated memory immediately. If
this was for insertion, the new object is _not_ released by this function,
but must rather be released by the caller.
These functions are guaranteed not to fail.
OPERATIONS TABLE
----------------
Various functions take a table of operations:
struct assoc_array_ops {
...
};
This points to a number of methods, all of which need to be provided:
(1) Get a chunk of index key from caller data:
unsigned long (*get_key_chunk)(const void *index_key, int level);
This should return a chunk of caller-supplied index key starting at the
*bit* position given by the level argument. The level argument will be a
multiple of ASSOC_ARRAY_KEY_CHUNK_SIZE and the function should return
ASSOC_ARRAY_KEY_CHUNK_SIZE bits. No error is possible.
(2) Get a chunk of an object's index key.
unsigned long (*get_object_key_chunk)(const void *object, int level);
As the previous function, but gets its data from an object in the array
rather than from a caller-supplied index key.
(3) See if this is the object we're looking for.
bool (*compare_object)(const void *object, const void *index_key);
Compare the object against an index key and return true if it matches and
false if it doesn't.
(4) Diff the index keys of two objects.
int (*diff_objects)(const void *object, const void *index_key);
Return the bit position at which the index key of the specified object
differs from the given index key or -1 if they are the same.
(5) Free an object.
void (*free_object)(void *object);
Free the specified object. Note that this may be called an RCU grace
period after assoc_array_apply_edit() was called, so synchronize_rcu() may
be necessary on module unloading.
MANIPULATION FUNCTIONS
----------------------
There are a number of functions for manipulating an associative array:
(1) Initialise an associative array.
void assoc_array_init(struct assoc_array *array);
This initialises the base structure for an associative array. It can't
fail.
(2) Insert/replace an object in an associative array.
struct assoc_array_edit *
assoc_array_insert(struct assoc_array *array,
const struct assoc_array_ops *ops,
const void *index_key,
void *object);
This inserts the given object into the array. Note that the least
significant bit of the pointer must be zero as it's used to type-mark
pointers internally.
If an object already exists for that key then it will be replaced with the
new object and the old one will be freed automatically.
The index_key argument should hold index key information and is
passed to the methods in the ops table when they are called.
This function makes no alteration to the array itself, but rather returns
an edit script that must be applied. -ENOMEM is returned in the case of
an out-of-memory error.
The caller should lock exclusively against other modifiers of the array.
(3) Delete an object from an associative array.
struct assoc_array_edit *
assoc_array_delete(struct assoc_array *array,
const struct assoc_array_ops *ops,
const void *index_key);
This deletes an object that matches the specified data from the array.
The index_key argument should hold index key information and is
passed to the methods in the ops table when they are called.
This function makes no alteration to the array itself, but rather returns
an edit script that must be applied. -ENOMEM is returned in the case of
an out-of-memory error. NULL will be returned if the specified object is
not found within the array.
The caller should lock exclusively against other modifiers of the array.
(4) Delete all objects from an associative array.
struct assoc_array_edit *
assoc_array_clear(struct assoc_array *array,
const struct assoc_array_ops *ops);
This deletes all the objects from an associative array and leaves it
completely empty.
This function makes no alteration to the array itself, but rather returns
an edit script that must be applied. -ENOMEM is returned in the case of
an out-of-memory error.
The caller should lock exclusively against other modifiers of the array.
(5) Destroy an associative array, deleting all objects.
void assoc_array_destroy(struct assoc_array *array,
const struct assoc_array_ops *ops);
This destroys the contents of the associative array and leaves it
completely empty. It is not permitted for another thread to be traversing
the array under the RCU read lock at the same time as this function is
destroying it as no RCU deferral is performed on memory release -
something that would require memory to be allocated.
The caller should lock exclusively against other modifiers and accessors
of the array.
(6) Garbage collect an associative array.
int assoc_array_gc(struct assoc_array *array,
const struct assoc_array_ops *ops,
bool (*iterator)(void *object, void *iterator_data),
void *iterator_data);
This iterates over the objects in an associative array and passes each one
to iterator(). If iterator() returns true, the object is kept. If it
returns false, the object will be freed. If the iterator() function
returns true, it must perform any appropriate refcount incrementing on the
object before returning.
The internal tree will be packed down if possible as part of the iteration
to reduce the number of nodes in it.
The iterator_data is passed directly to iterator() and is otherwise
ignored by the function.
The function will return 0 if successful and -ENOMEM if there wasn't
enough memory.
It is possible for other threads to iterate over or search the array under
the RCU read lock whilst this function is in progress. The caller should
lock exclusively against other modifiers of the array.
ACCESS FUNCTIONS
----------------
There are two functions for accessing an associative array:
(1) Iterate over all the objects in an associative array.
int assoc_array_iterate(const struct assoc_array *array,
int (*iterator)(const void *object,
void *iterator_data),
void *iterator_data);
This passes each object in the array to the iterator callback function.
iterator_data is private data for that function.
This may be used on an array at the same time as the array is being
modified, provided the RCU read lock is held. Under such circumstances,
it is possible for the iteration function to see some objects twice. If
this is a problem, then modification should be locked against. The
iteration algorithm should not, however, miss any objects.
The function will return 0 if no objects were in the array or else it will
return the result of the last iterator function called. Iteration stops
immediately if any call to the iteration function results in a non-zero
return.
(2) Find an object in an associative array.
void *assoc_array_find(const struct assoc_array *array,
const struct assoc_array_ops *ops,
const void *index_key);
This walks through the array's internal tree directly to the object
specified by the index key..
This may be used on an array at the same time as the array is being
modified, provided the RCU read lock is held.
The function will return the object if found (and set *_type to the object
type) or will return NULL if the object was not found.
INDEX KEY FORM
--------------
The index key can be of any form, but since the algorithms aren't told how long
the key is, it is strongly recommended that the index key includes its length
very early on before any variation due to the length would have an effect on
comparisons.
This will cause leaves with different length keys to scatter away from each
other - and those with the same length keys to cluster together.
It is also recommended that the index key begin with a hash of the rest of the
key to maximise scattering throughout keyspace.
The better the scattering, the wider and lower the internal tree will be.
Poor scattering isn't too much of a problem as there are shortcuts and nodes
can contain mixtures of leaves and metadata pointers.
The index key is read in chunks of machine word. Each chunk is subdivided into
one nibble (4 bits) per level, so on a 32-bit CPU this is good for 8 levels and
on a 64-bit CPU, 16 levels. Unless the scattering is really poor, it is
unlikely that more than one word of any particular index key will have to be
used.
=================
INTERNAL WORKINGS
=================
The associative array data structure has an internal tree. This tree is
constructed of two types of metadata blocks: nodes and shortcuts.
A node is an array of slots. Each slot can contain one of four things:
(*) A NULL pointer, indicating that the slot is empty.
(*) A pointer to an object (a leaf).
(*) A pointer to a node at the next level.
(*) A pointer to a shortcut.
BASIC INTERNAL TREE LAYOUT
--------------------------
Ignoring shortcuts for the moment, the nodes form a multilevel tree. The index
key space is strictly subdivided by the nodes in the tree and nodes occur on
fixed levels. For example:
Level: 0 1 2 3
=============== =============== =============== ===============
NODE D
NODE B NODE C +------>+---+
+------>+---+ +------>+---+ | | 0 |
NODE A | | 0 | | | 0 | | +---+
+---+ | +---+ | +---+ | : :
| 0 | | : : | : : | +---+
+---+ | +---+ | +---+ | | f |
| 1 |---+ | 3 |---+ | 7 |---+ +---+
+---+ +---+ +---+
: : : : | 8 |---+
+---+ +---+ +---+ | NODE E
| e |---+ | f | : : +------>+---+
+---+ | +---+ +---+ | 0 |
| f | | | f | +---+
+---+ | +---+ : :
| NODE F +---+
+------>+---+ | f |
| 0 | NODE G +---+
+---+ +------>+---+
: : | | 0 |
+---+ | +---+
| 6 |---+ : :
+---+ +---+
: : | f |
+---+ +---+
| f |
+---+
In the above example, there are 7 nodes (A-G), each with 16 slots (0-f).
Assuming no other meta data nodes in the tree, the key space is divided thusly:
KEY PREFIX NODE
========== ====
137* D
138* E
13[0-69-f]* C
1[0-24-f]* B
e6* G
e[0-57-f]* F
[02-df]* A
So, for instance, keys with the following example index keys will be found in
the appropriate nodes:
INDEX KEY PREFIX NODE
=============== ======= ====
13694892892489 13 C
13795289025897 137 D
13889dde88793 138 E
138bbb89003093 138 E
1394879524789 12 C
1458952489 1 B
9431809de993ba - A
b4542910809cd - A
e5284310def98 e F
e68428974237 e6 G
e7fffcbd443 e F
f3842239082 - A
To save memory, if a node can hold all the leaves in its portion of keyspace,
then the node will have all those leaves in it and will not have any metadata
pointers - even if some of those leaves would like to be in the same slot.
A node can contain a heterogeneous mix of leaves and metadata pointers.
Metadata pointers must be in the slots that match their subdivisions of key
space. The leaves can be in any slot not occupied by a metadata pointer. It
is guaranteed that none of the leaves in a node will match a slot occupied by a
metadata pointer. If the metadata pointer is there, any leaf whose key matches
the metadata key prefix must be in the subtree that the metadata pointer points
to.
In the above example list of index keys, node A will contain:
SLOT CONTENT INDEX KEY (PREFIX)
==== =============== ==================
1 PTR TO NODE B 1*
any LEAF 9431809de993ba
any LEAF b4542910809cd
e PTR TO NODE F e*
any LEAF f3842239082
and node B:
3 PTR TO NODE C 13*
any LEAF 1458952489
SHORTCUTS
---------
Shortcuts are metadata records that jump over a piece of keyspace. A shortcut
is a replacement for a series of single-occupancy nodes ascending through the
levels. Shortcuts exist to save memory and to speed up traversal.
It is possible for the root of the tree to be a shortcut - say, for example,
the tree contains at least 17 nodes all with key prefix '1111'. The insertion
algorithm will insert a shortcut to skip over the '1111' keyspace in a single
bound and get to the fourth level where these actually become different.
SPLITTING AND COLLAPSING NODES
------------------------------
Each node has a maximum capacity of 16 leaves and metadata pointers. If the
insertion algorithm finds that it is trying to insert a 17th object into a
node, that node will be split such that at least two leaves that have a common
key segment at that level end up in a separate node rooted on that slot for
that common key segment.
If the leaves in a full node and the leaf that is being inserted are
sufficiently similar, then a shortcut will be inserted into the tree.
When the number of objects in the subtree rooted at a node falls to 16 or
fewer, then the subtree will be collapsed down to a single node - and this will
ripple towards the root if possible.
NON-RECURSIVE ITERATION
-----------------------
Each node and shortcut contains a back pointer to its parent and the number of
slot in that parent that points to it. None-recursive iteration uses these to
proceed rootwards through the tree, going to the parent node, slot N + 1 to
make sure progress is made without the need for a stack.
The backpointers, however, make simultaneous alteration and iteration tricky.
SIMULTANEOUS ALTERATION AND ITERATION
-------------------------------------
There are a number of cases to consider:
(1) Simple insert/replace. This involves simply replacing a NULL or old
matching leaf pointer with the pointer to the new leaf after a barrier.
The metadata blocks don't change otherwise. An old leaf won't be freed
until after the RCU grace period.
(2) Simple delete. This involves just clearing an old matching leaf. The
metadata blocks don't change otherwise. The old leaf won't be freed until
after the RCU grace period.
(3) Insertion replacing part of a subtree that we haven't yet entered. This
may involve replacement of part of that subtree - but that won't affect
the iteration as we won't have reached the pointer to it yet and the
ancestry blocks are not replaced (the layout of those does not change).
(4) Insertion replacing nodes that we're actively processing. This isn't a
problem as we've passed the anchoring pointer and won't switch onto the
new layout until we follow the back pointers - at which point we've
already examined the leaves in the replaced node (we iterate over all the
leaves in a node before following any of its metadata pointers).
We might, however, re-see some leaves that have been split out into a new
branch that's in a slot further along than we were at.
(5) Insertion replacing nodes that we're processing a dependent branch of.
This won't affect us until we follow the back pointers. Similar to (4).
(6) Deletion collapsing a branch under us. This doesn't affect us because the
back pointers will get us back to the parent of the new node before we
could see the new node. The entire collapsed subtree is thrown away
unchanged - and will still be rooted on the same slot, so we shouldn't
process it a second time as we'll go back to slot + 1.
Note:
(*) Under some circumstances, we need to simultaneously change the parent
pointer and the parent slot pointer on a node (say, for example, we
inserted another node before it and moved it up a level). We cannot do
this without locking against a read - so we have to replace that node too.
However, when we're changing a shortcut into a node this isn't a problem
as shortcuts only have one slot and so the parent slot number isn't used
when traversing backwards over one. This means that it's okay to change
the slot number first - provided suitable barriers are used to make sure
the parent slot number is read after the back pointer.
Obsolete blocks and leaves are freed up after an RCU grace period has passed,
so as long as anyone doing walking or iteration holds the RCU read lock, the
old superstructure should not go away on them.

24
Documentation/devicetree/bindings/arc/pmu.txt Normal file
View File

@ -0,0 +1,24 @@
* ARC Performance Monitor Unit
The ARC 700 can be configured with a pipeline performance monitor for counting
CPU and cache events like cache misses and hits.
Note that:
* ARC 700 refers to a family of ARC processor cores;
- There is only one type of PMU available for the whole family;
- The PMU may support different sets of events; supported events are probed
at boot time, as required by the reference manual.
* The ARC 700 PMU does not support interrupts; although HW events may be
counted, the HW events themselves cannot serve as a trigger for a sample.
Required properties:
- compatible : should contain
"snps,arc700-pmu"
Example:
pmu {
compatible = "snps,arc700-pmu";
};

4
Documentation/devicetree/bindings/arm/calxeda/mem-ctrlr.txt
View File

@ -1,7 +1,9 @@
Calxeda DDR memory controller
Properties:
- compatible : Should be "calxeda,hb-ddr-ctrl"
- compatible : Should be:
- "calxeda,hb-ddr-ctrl" for ECX-1000
- "calxeda,ecx-2000-ddr-ctrl" for ECX-2000
- reg : Address and size for DDR controller registers.
- interrupts : Interrupt for DDR controller.

8
Documentation/devicetree/bindings/arm/omap/mpu.txt
View File

@ -7,10 +7,18 @@ The MPU contain CPUs, GIC, L2 cache and a local PRCM.
Required properties:
- compatible : Should be "ti,omap3-mpu" for OMAP3
Should be "ti,omap4-mpu" for OMAP4
Should be "ti,omap5-mpu" for OMAP5
- ti,hwmods: "mpu"
Examples:
- For an OMAP5 SMP system:
mpu {
compatible = "ti,omap5-mpu";
ti,hwmods = "mpu"
};
- For an OMAP4 SMP system:
mpu {

1
Documentation/devicetree/bindings/arm/pmu.txt
View File

@ -7,6 +7,7 @@ representation in the device tree should be done as under:-
Required properties:
- compatible : should be one of
"arm,armv8-pmuv3"
"arm,cortex-a15-pmu"
"arm,cortex-a9-pmu"
"arm,cortex-a8-pmu"

2
Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
View File

@ -49,7 +49,7 @@ adc@12D10000 {
/* NTC thermistor is a hwmon device */
ncp15wb473@0 {
compatible = "ntc,ncp15wb473";
pullup-uV = <1800000>;
pullup-uv = <1800000>;
pullup-ohm = <47000>;
pulldown-ohm = <0>;
io-channels = <&adc 4>;

2
Documentation/devicetree/bindings/clock/exynos4-clock.txt
View File

@ -6,7 +6,7 @@ SoC's in the Exynos4 family.
Required Properties:
- comptible: should be one of the following.
- compatible: should be one of the following.
- "samsung,exynos4210-clock" - controller compatible with Exynos4210 SoC.
- "samsung,exynos4412-clock" - controller compatible with Exynos4412 SoC.

2
Documentation/devicetree/bindings/clock/exynos5250-clock.txt
View File

@ -5,7 +5,7 @@ controllers within the Exynos5250 SoC.
Required Properties:
- comptible: should be one of the following.
- compatible: should be one of the following.
- "samsung,exynos5250-clock" - controller compatible with Exynos5250 SoC.
- reg: physical base address of the controller and length of memory mapped

2
Documentation/devicetree/bindings/clock/exynos5420-clock.txt
View File

@ -5,7 +5,7 @@ controllers within the Exynos5420 SoC.
Required Properties:
- comptible: should be one of the following.
- compatible: should be one of the following.
- "samsung,exynos5420-clock" - controller compatible with Exynos5420 SoC.
- reg: physical base address of the controller and length of memory mapped

2
Documentation/devicetree/bindings/clock/exynos5440-clock.txt
View File

@ -5,7 +5,7 @@ controllers within the Exynos5440 SoC.
Required Properties:
- comptible: should be "samsung,exynos5440-clock".
- compatible: should be "samsung,exynos5440-clock".
- reg: physical base address of the controller and length of memory mapped
region.

30
Documentation/devicetree/bindings/crypto/omap-des.txt Normal file
View File

@ -0,0 +1,30 @@
OMAP SoC DES crypto Module
Required properties:
- compatible : Should contain "ti,omap4-des"
- ti,hwmods: Name of the hwmod associated with the DES module
- reg : Offset and length of the register set for the module
- interrupts : the interrupt-specifier for the DES module
- clocks : A phandle to the functional clock node of the DES module
corresponding to each entry in clock-names
- clock-names : Name of the functional clock, should be "fck"
Optional properties:
- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
Documentation/devicetree/bindings/dma/dma.txt
Each entry corresponds to an entry in dma-names
- dma-names: DMA request names should include "tx" and "rx" if present
Example:
/* DRA7xx SoC */
des: des@480a5000 {
compatible = "ti,omap4-des";
ti,hwmods = "des";
reg = <0x480a5000 0xa0>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&sdma 117>, <&sdma 116>;
dma-names = "tx", "rx";
clocks = <&l3_iclk_div>;
clock-names = "fck";
};

2
Documentation/devicetree/bindings/crypto/omap-sham.txt
View File

@ -6,7 +6,7 @@ Required properties:
SHAM versions:
- "ti,omap2-sham" for OMAP2 & OMAP3.
- "ti,omap4-sham" for OMAP4 and AM33XX.
Note that these two versions are incompatible.
- "ti,omap5-sham" for OMAP5, DRA7 and AM43XX.
- ti,hwmods: Name of the hwmod associated with the SHAM module
- reg : Offset and length of the register set for the module
- interrupts : the interrupt-specifier for the SHAM module.

2
Documentation/devicetree/bindings/dma/atmel-dma.txt
View File

@ -28,7 +28,7 @@ The three cells in order are:
dependent:
- bit 7-0: peripheral identifier for the hardware handshaking interface. The
identifier can be different for tx and rx.
- bit 11-8: FIFO configuration. 0 for half FIFO, 1 for ALAP, 1 for ASAP.
- bit 11-8: FIFO configuration. 0 for half FIFO, 1 for ALAP, 2 for ASAP.
Example:

66
Documentation/devicetree/bindings/gpio/8xxx_gpio.txt
View File

@ -5,16 +5,42 @@ This is for the non-QE/CPM/GUTs GPIO controllers as found on
Every GPIO controller node must have #gpio-cells property defined,
this information will be used to translate gpio-specifiers.
See bindings/gpio/gpio.txt for details of how to specify GPIO
information for devices.
The GPIO module usually is connected to the SoC's internal interrupt
controller, see bindings/interrupt-controller/interrupts.txt (the
interrupt client nodes section) for details how to specify this GPIO
module's interrupt.
The GPIO module may serve as another interrupt controller (cascaded to
the SoC's internal interrupt controller). See the interrupt controller
nodes section in bindings/interrupt-controller/interrupts.txt for
details.
Required properties:
- compatible : "fsl,<CHIP>-gpio" followed by "fsl,mpc8349-gpio" for
83xx, "fsl,mpc8572-gpio" for 85xx and "fsl,mpc8610-gpio" for 86xx.
- #gpio-cells : Should be two. The first cell is the pin number and the
second cell is used to specify optional parameters (currently unused).
- interrupts : Interrupt mapping for GPIO IRQ.
- interrupt-parent : Phandle for the interrupt controller that
services interrupts for this device.
- gpio-controller : Marks the port as GPIO controller.
- compatible: "fsl,<chip>-gpio" followed by "fsl,mpc8349-gpio"
for 83xx, "fsl,mpc8572-gpio" for 85xx, or
"fsl,mpc8610-gpio" for 86xx.
- #gpio-cells: Should be two. The first cell is the pin number
and the second cell is used to specify optional
parameters (currently unused).
- interrupt-parent: Phandle for the interrupt controller that
services interrupts for this device.
- interrupts: Interrupt mapping for GPIO IRQ.
- gpio-controller: Marks the port as GPIO controller.
Optional properties:
- interrupt-controller: Empty boolean property which marks the GPIO
module as an IRQ controller.
- #interrupt-cells: Should be two. Defines the number of integer
cells required to specify an interrupt within
this interrupt controller. The first cell
defines the pin number, the second cell
defines additional flags (trigger type,
trigger polarity). Note that the available
set of trigger conditions supported by the
GPIO module depends on the actual SoC.
Example of gpio-controller nodes for a MPC8347 SoC:
@ -22,39 +48,27 @@ Example of gpio-controller nodes for a MPC8347 SoC:
#gpio-cells = <2>;
compatible = "fsl,mpc8347-gpio", "fsl,mpc8349-gpio";
reg = <0xc00 0x100>;
interrupts = <74 0x8>;
interrupt-parent = <&ipic>;
interrupts = <74 0x8>;
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio2: gpio-controller@d00 {
#gpio-cells = <2>;
compatible = "fsl,mpc8347-gpio", "fsl,mpc8349-gpio";
reg = <0xd00 0x100>;
interrupts = <75 0x8>;
interrupt-parent = <&ipic>;
interrupts = <75 0x8>;
gpio-controller;
};
See booting-without-of.txt for details of how to specify GPIO
information for devices.
To use GPIO pins as interrupt sources for peripherals, specify the
GPIO controller as the interrupt parent and define GPIO number +
trigger mode using the interrupts property, which is defined like
this:
interrupts = <number trigger>, where:
- number: GPIO pin (0..31)
- trigger: trigger mode:
2 = trigger on falling edge
3 = trigger on both edges
Example of device using this is:
Example of a peripheral using the GPIO module as an IRQ controller:
funkyfpga@0 {
compatible = "funky-fpga";
...
interrupts = <4 3>;
interrupt-parent = <&gpio1>;
interrupts = <4 3>;
};

35
Documentation/devicetree/bindings/i2c/i2c-bcm-kona.txt Normal file
View File

@ -0,0 +1,35 @@
Broadcom Kona Family I2C
=========================
This I2C controller is used in the following Broadcom SoCs:
BCM11130
BCM11140
BCM11351
BCM28145
BCM28155
Required Properties
-------------------
- compatible: "brcm,bcm11351-i2c", "brcm,kona-i2c"
- reg: Physical base address and length of controller registers
- interrupts: The interrupt number used by the controller
- clocks: clock specifier for the kona i2c external clock
- clock-frequency: The I2C bus frequency in Hz
- #address-cells: Should be <1>
- #size-cells: Should be <0>
Refer to clocks/clock-bindings.txt for generic clock consumer
properties.
Example:
i2c@3e016000 {
compatible = "brcm,bcm11351-i2c","brcm,kona-i2c";
reg = <0x3e016000 0x80>;
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&bsc1_clk>;
clock-frequency = <400000>;
#address-cells = <1>;
#size-cells = <0>;
};

44
Documentation/devicetree/bindings/i2c/i2c-exynos5.txt Normal file
View File

@ -0,0 +1,44 @@
* Samsung's High Speed I2C controller
The Samsung's High Speed I2C controller is used to interface with I2C devices
at various speeds ranging from 100khz to 3.4Mhz.
Required properties:
- compatible: value should be.
-> "samsung,exynos5-hsi2c", for i2c compatible with exynos5 hsi2c.
- reg: physical base address of the controller and length of memory mapped
region.
- interrupts: interrupt number to the cpu.
- #address-cells: always 1 (for i2c addresses)
- #size-cells: always 0
- Pinctrl:
- pinctrl-0: Pin control group to be used for this controller.
- pinctrl-names: Should contain only one value - "default".
Optional properties:
- clock-frequency: Desired operating frequency in Hz of the bus.
-> If not specified, the bus operates in fast-speed mode at
at 100khz.
-> If specified, the bus operates in high-speed mode only if the
clock-frequency is >= 1Mhz.
Example:
hsi2c@12ca0000 {
compatible = "samsung,exynos5-hsi2c";
reg = <0x12ca0000 0x100>;
interrupts = <56>;
clock-frequency = <100000>;
pinctrl-0 = <&i2c4_bus>;
pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
s2mps11_pmic@66 {
compatible = "samsung,s2mps11-pmic";
reg = <0x66>;
};
};

3
Documentation/devicetree/bindings/i2c/i2c-omap.txt
View File

@ -1,7 +1,8 @@
I2C for OMAP platforms
Required properties :
- compatible : Must be "ti,omap3-i2c" or "ti,omap4-i2c"
- compatible : Must be "ti,omap2420-i2c", "ti,omap2430-i2c", "ti,omap3-i2c"
or "ti,omap4-i2c"
- ti,hwmods : Must be "i2c<n>", n being the instance number (1-based)
- #address-cells = <1>;
- #size-cells = <0>;

23
Documentation/devicetree/bindings/i2c/i2c-rcar.txt Normal file
View File

@ -0,0 +1,23 @@
I2C for R-Car platforms
Required properties:
- compatible: Must be one of
"renesas,i2c-rcar"
"renesas,i2c-r8a7778"
"renesas,i2c-r8a7779"
"renesas,i2c-r8a7790"
- reg: physical base address of the controller and length of memory mapped
region.
- interrupts: interrupt specifier.
Optional properties:
- clock-frequency: desired I2C bus clock frequency in Hz. The absence of this
propoerty indicates the default frequency 100 kHz.
Examples :
i2c0: i2c@e6500000 {
compatible = "renesas,i2c-rcar-h2";
reg = <0 0xe6500000 0 0x428>;
interrupts = <0 174 0x4>;
};

41
Documentation/devicetree/bindings/i2c/i2c-st.txt Normal file
View File

@ -0,0 +1,41 @@
ST SSC binding, for I2C mode operation
Required properties :
- compatible : Must be "st,comms-ssc-i2c" or "st,comms-ssc4-i2c"
- reg : Offset and length of the register set for the device
- interrupts : the interrupt specifier
- clock-names: Must contain "ssc".
- clocks: Must contain an entry for each name in clock-names. See the common
clock bindings.
- A pinctrl state named "default" must be defined to set pins in mode of
operation for I2C transfer.
Optional properties :
- clock-frequency : Desired I2C bus clock frequency in Hz. If not specified,
the default 100 kHz frequency will be used. As only Normal and Fast modes
are supported, possible values are 100000 and 400000.
- st,i2c-min-scl-pulse-width-us : The minimum valid SCL pulse width that is
allowed through the deglitch circuit. In units of us.
- st,i2c-min-sda-pulse-width-us : The minimum valid SDA pulse width that is
allowed through the deglitch circuit. In units of us.
- A pinctrl state named "idle" could be defined to set pins in idle state
when I2C instance is not performing a transfer.
- A pinctrl state named "sleep" could be defined to set pins in sleep state
when driver enters in suspend.
Example :
i2c0: i2c@fed40000 {
compatible = "st,comms-ssc4-i2c";
reg = <0xfed40000 0x110>;
interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&CLK_S_ICN_REG_0>;
clock-names = "ssc";
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c0_default>;
st,i2c-min-scl-pulse-width-us = <0>;
st,i2c-min-sda-pulse-width-us = <5>;
};

4
Documentation/devicetree/bindings/i2c/trivial-devices.txt
View File

@ -15,6 +15,7 @@ adi,adt7461 +/-1C TDM Extended Temp Range I.C
adt7461 +/-1C TDM Extended Temp Range I.C
at,24c08 i2c serial eeprom (24cxx)
atmel,24c02 i2c serial eeprom (24cxx)
atmel,at97sc3204t i2c trusted platform module (TPM)
catalyst,24c32 i2c serial eeprom
dallas,ds1307 64 x 8, Serial, I2C Real-Time Clock
dallas,ds1338 I2C RTC with 56-Byte NV RAM
@ -35,6 +36,7 @@ fsl,mc13892 MC13892: Power Management Integrated Circuit (PMIC) for i.MX35/51
fsl,mma8450 MMA8450Q: Xtrinsic Low-power, 3-axis Xtrinsic Accelerometer
fsl,mpr121 MPR121: Proximity Capacitive Touch Sensor Controller
fsl,sgtl5000 SGTL5000: Ultra Low-Power Audio Codec
gmt,g751 G751: Digital Temperature Sensor and Thermal Watchdog with Two-Wire Interface
infineon,slb9635tt Infineon SLB9635 (Soft-) I2C TPM (old protocol, max 100khz)
infineon,slb9645tt Infineon SLB9645 I2C TPM (new protocol, max 400khz)
maxim,ds1050 5 Bit Programmable, Pulse-Width Modulator
@ -44,6 +46,7 @@ mc,rv3029c2 Real Time Clock Module with I2C-Bus
national,lm75 I2C TEMP SENSOR
national,lm80 Serial Interface ACPI-Compatible Microprocessor System Hardware Monitor
national,lm92 ±0.33°C Accurate, 12-Bit + Sign Temperature Sensor and Thermal Window Comparator with Two-Wire Interface
nuvoton,npct501 i2c trusted platform module (TPM)
nxp,pca9556 Octal SMBus and I2C registered interface
nxp,pca9557 8-bit I2C-bus and SMBus I/O port with reset
nxp,pcf8563 Real-time clock/calendar
@ -61,3 +64,4 @@ taos,tsl2550 Ambient Light Sensor with SMBUS/Two Wire Serial Interface
ti,tsc2003 I2C Touch-Screen Controller
ti,tmp102 Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface
ti,tmp275 Digital Temperature Sensor
winbond,wpct301 i2c trusted platform module (TPM)

29
Documentation/devicetree/bindings/media/st-rc.txt Normal file
View File

@ -0,0 +1,29 @@
Device-Tree bindings for ST IRB IP
Required properties:
- compatible: Should contain "st,comms-irb".
- reg: Base physical address of the controller and length of memory
mapped region.
- interrupts: interrupt-specifier for the sole interrupt generated by
the device. The interrupt specifier format depends on the interrupt
controller parent.
- rx-mode: can be "infrared" or "uhf". This property specifies the L1
protocol used for receiving remote control signals. rx-mode should
be present iff the rx pins are wired up.
- tx-mode: should be "infrared". This property specifies the L1
protocol used for transmitting remote control signals. tx-mode should
be present iff the tx pins are wired up.
Optional properties:
- pinctrl-names, pinctrl-0: the pincontrol settings to configure muxing
properly for IRB pins.
- clocks : phandle with clock-specifier pair for IRB.
Example node:
rc: rc@fe518000 {
compatible = "st,comms-irb";
reg = <0xfe518000 0x234>;
interrupts = <0 203 0>;
rx-mode = "infrared";
};

5
Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
View File

@ -12,6 +12,11 @@ Required properties:
Optional properties:
- fsl,cd-controller : Indicate to use controller internal card detection
- fsl,wp-controller : Indicate to use controller internal write protection
- fsl,delay-line : Specify the number of delay cells for override mode.
This is used to set the clock delay for DLL(Delay Line) on override mode
to select a proper data sampling window in case the clock quality is not good
due to signal path is too long on the board. Please refer to eSDHC/uSDHC
chapter, DLL (Delay Line) section in RM for details.
Examples:

9
Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
View File

@ -52,6 +52,9 @@ Optional properties:
is specified and the ciu clock is specified then we'll try to set the ciu
clock to this at probe time.
* clock-freq-min-max: Minimum and Maximum clock frequency for card output
clock(cclk_out). If it's not specified, max is 200MHZ and min is 400KHz by default.
* num-slots: specifies the number of slots supported by the controller.
The number of physical slots actually used could be equal or less than the
value specified by num-slots. If this property is not specified, the value
@ -66,6 +69,10 @@ Optional properties:
* supports-highspeed: Enables support for high speed cards (up to 50MHz)
* caps2-mmc-hs200-1_8v: Supports mmc HS200 SDR 1.8V mode
* caps2-mmc-hs200-1_2v: Supports mmc HS200 SDR 1.2V mode
* broken-cd: as documented in mmc core bindings.
* vmmc-supply: The phandle to the regulator to use for vmmc. If this is
@ -93,8 +100,10 @@ board specific portions as listed below.
dwmmc0@12200000 {
clock-frequency = <400000000>;
clock-freq-min-max = <400000 200000000>;
num-slots = <1>;
supports-highspeed;
caps2-mmc-hs200-1_8v;
broken-cd;
fifo-depth = <0x80>;
card-detect-delay = <200>;

54
Documentation/devicetree/bindings/mmc/ti-omap.txt Normal file
View File

@ -0,0 +1,54 @@
* TI MMC host controller for OMAP1 and 2420
The MMC Host Controller on TI OMAP1 and 2420 family provides
an interface for MMC, SD, and SDIO types of memory cards.
This file documents differences between the core properties described
by mmc.txt and the properties used by the omap mmc driver.
Note that this driver will not work with omap2430 or later omaps,
please see the omap hsmmc driver for the current omaps.
Required properties:
- compatible: Must be "ti,omap2420-mmc", for OMAP2420 controllers
- ti,hwmods: For 2420, must be "msdi<n>", where n is controller
instance starting 1
Examples:
msdi1: mmc@4809c000 {
compatible = "ti,omap2420-mmc";
ti,hwmods = "msdi1";
reg = <0x4809c000 0x80>;
interrupts = <83>;
dmas = <&sdma 61 &sdma 62>;
dma-names = "tx", "rx";
};
* TI MMC host controller for OMAP1 and 2420
The MMC Host Controller on TI OMAP1 and 2420 family provides
an interface for MMC, SD, and SDIO types of memory cards.
This file documents differences between the core properties described
by mmc.txt and the properties used by the omap mmc driver.
Note that this driver will not work with omap2430 or later omaps,
please see the omap hsmmc driver for the current omaps.
Required properties:
- compatible: Must be "ti,omap2420-mmc", for OMAP2420 controllers
- ti,hwmods: For 2420, must be "msdi<n>", where n is controller
instance starting 1
Examples:
msdi1: mmc@4809c000 {
compatible = "ti,omap2420-mmc";
ti,hwmods = "msdi1";
reg = <0x4809c000 0x80>;
interrupts = <83>;
dmas = <&sdma 61 &sdma 62>;
dma-names = "tx", "rx";
};

2
Documentation/devicetree/bindings/net/fsl-fec.txt
View File

@ -15,6 +15,7 @@ Optional properties:
only if property "phy-reset-gpios" is available. Missing the property
will have the duration be 1 millisecond. Numbers greater than 1000 are
invalid and 1 millisecond will be used instead.
- phy-supply: regulator that powers the Ethernet PHY.
Example:
@ -25,4 +26,5 @@ ethernet@83fec000 {
phy-mode = "mii";
phy-reset-gpios = <&gpio2 14 0>; /* GPIO2_14 */
local-mac-address = [00 04 9F 01 1B B9];
phy-supply = <&reg_fec_supply>;
};

20
Documentation/devicetree/bindings/power/twl-charger.txt Normal file
View File

@ -0,0 +1,20 @@
TWL BCI (Battery Charger Interface)
Required properties:
- compatible:
- "ti,twl4030-bci"
- interrupts: two interrupt lines from the TWL SIH (secondary
interrupt handler) - interrupts 9 and 2.
Optional properties:
- ti,bb-uvolt: microvolts for charging the backup battery.
- ti,bb-uamp: microamps for charging the backup battery.
Examples:
bci {
compatible = "ti,twl4030-bci";
interrupts = <9>, <2>;
ti,bb-uvolt = <3200000>;
ti,bb-uamp = <150>;
};

32
Documentation/devicetree/bindings/power_supply/ti,bq24735.txt Normal file
View File

@ -0,0 +1,32 @@
TI BQ24735 Charge Controller
~~~~~~~~~~
Required properties :
- compatible : "ti,bq24735"
Optional properties :
- interrupts : Specify the interrupt to be used to trigger when the AC
adapter is either plugged in or removed.
- ti,ac-detect-gpios : This GPIO is optionally used to read the AC adapter
presence. This is a Host GPIO that is configured as an input and
connected to the bq24735.
- ti,charge-current : Used to control and set the charging current. This value
must be between 128mA and 8.128A with a 64mA step resolution. The POR value
is 0x0000h. This number is in mA (e.g. 8192), see spec for more information
about the ChargeCurrent (0x14h) register.
- ti,charge-voltage : Used to control and set the charging voltage. This value
must be between 1.024V and 19.2V with a 16mV step resolution. The POR value
is 0x0000h. This number is in mV (e.g. 19200), see spec for more information
about the ChargeVoltage (0x15h) register.
- ti,input-current : Used to control and set the charger input current. This
value must be between 128mA and 8.064A with a 128mA step resolution. The
POR value is 0x1000h. This number is in mA (e.g. 8064), see the spec for
more information about the InputCurrent (0x3fh) register.
Example:
bq24735@9 {
compatible = "ti,bq24735";
reg = <0x9>;
ti,ac-detect-gpios = <&gpio 72 0x1>;
}

138
Documentation/devicetree/bindings/powerpc/fsl/dma.txt
View File

@ -1,33 +1,30 @@
* Freescale 83xx DMA Controller
* Freescale DMA Controllers
Freescale PowerPC 83xx have on chip general purpose DMA controllers.
** Freescale Elo DMA Controller
This is a little-endian 4-channel DMA controller, used in Freescale mpc83xx
series chips such as mpc8315, mpc8349, mpc8379 etc.
Required properties:
- compatible : compatible list, contains 2 entries, first is
"fsl,CHIP-dma", where CHIP is the processor
(mpc8349, mpc8360, etc.) and the second is
"fsl,elo-dma"
- reg : <registers mapping for DMA general status reg>
- ranges : Should be defined as specified in 1) to describe the
DMA controller channels.
- compatible : must include "fsl,elo-dma"
- reg : DMA General Status Register, i.e. DGSR which contains
status for all the 4 DMA channels
- ranges : describes the mapping between the address space of the
DMA channels and the address space of the DMA controller
- cell-index : controller index. 0 for controller @ 0x8100
- interrupts : <interrupt mapping for DMA IRQ>
- interrupts : interrupt specifier for DMA IRQ
- interrupt-parent : optional, if needed for interrupt mapping
- DMA channel nodes:
- compatible : compatible list, contains 2 entries, first is
"fsl,CHIP-dma-channel", where CHIP is the processor
(mpc8349, mpc8350, etc.) and the second is
"fsl,elo-dma-channel". However, see note below.
- reg : <registers mapping for channel>
- cell-index : dma channel index starts at 0.
- compatible : must include "fsl,elo-dma-channel"
However, see note below.
- reg : DMA channel specific registers
- cell-index : DMA channel index starts at 0.
Optional properties:
- interrupts : <interrupt mapping for DMA channel IRQ>
(on 83xx this is expected to be identical to
the interrupts property of the parent node)
- interrupts : interrupt specifier for DMA channel IRQ
(on 83xx this is expected to be identical to
the interrupts property of the parent node)
- interrupt-parent : optional, if needed for interrupt mapping
Example:
@ -70,30 +67,27 @@ Example:
};
};
* Freescale 85xx/86xx DMA Controller
Freescale PowerPC 85xx/86xx have on chip general purpose DMA controllers.
** Freescale EloPlus DMA Controller
This is a 4-channel DMA controller with extended addresses and chaining,
mainly used in Freescale mpc85xx/86xx, Pxxx and BSC series chips, such as
mpc8540, mpc8641 p4080, bsc9131 etc.
Required properties:
- compatible : compatible list, contains 2 entries, first is
"fsl,CHIP-dma", where CHIP is the processor
(mpc8540, mpc8540, etc.) and the second is
"fsl,eloplus-dma"
- reg : <registers mapping for DMA general status reg>
- compatible : must include "fsl,eloplus-dma"
- reg : DMA General Status Register, i.e. DGSR which contains
status for all the 4 DMA channels
- cell-index : controller index. 0 for controller @ 0x21000,
1 for controller @ 0xc000
- ranges : Should be defined as specified in 1) to describe the
DMA controller channels.
- ranges : describes the mapping between the address space of the
DMA channels and the address space of the DMA controller
- DMA channel nodes:
- compatible : compatible list, contains 2 entries, first is
"fsl,CHIP-dma-channel", where CHIP is the processor
(mpc8540, mpc8560, etc.) and the second is
"fsl,eloplus-dma-channel". However, see note below.
- cell-index : dma channel index starts at 0.
- reg : <registers mapping for channel>
- interrupts : <interrupt mapping for DMA channel IRQ>
- compatible : must include "fsl,eloplus-dma-channel"
However, see note below.
- cell-index : DMA channel index starts at 0.
- reg : DMA channel specific registers
- interrupts : interrupt specifier for DMA channel IRQ
- interrupt-parent : optional, if needed for interrupt mapping
Example:
@ -134,6 +128,76 @@ Example:
};
};
** Freescale Elo3 DMA Controller
DMA controller which has same function as EloPlus except that Elo3 has 8
channels while EloPlus has only 4, it is used in Freescale Txxx and Bxxx
series chips, such as t1040, t4240, b4860.
Required properties:
- compatible : must include "fsl,elo3-dma"
- reg : contains two entries for DMA General Status Registers,
i.e. DGSR0 which includes status for channel 1~4, and
DGSR1 for channel 5~8
- ranges : describes the mapping between the address space of the
DMA channels and the address space of the DMA controller
- DMA channel nodes:
- compatible : must include "fsl,eloplus-dma-channel"
- reg : DMA channel specific registers
- interrupts : interrupt specifier for DMA channel IRQ
- interrupt-parent : optional, if needed for interrupt mapping
Example:
dma@100300 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,elo3-dma";
reg = <0x100300 0x4>,
<0x100600 0x4>;
ranges = <0x0 0x100100 0x500>;
dma-channel@0 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x0 0x80>;
interrupts = <28 2 0 0>;
};
dma-channel@80 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x80 0x80>;
interrupts = <29 2 0 0>;
};
dma-channel@100 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x100 0x80>;
interrupts = <30 2 0 0>;
};
dma-channel@180 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x180 0x80>;
interrupts = <31 2 0 0>;
};
dma-channel@300 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x300 0x80>;
interrupts = <76 2 0 0>;
};
dma-channel@380 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x380 0x80>;
interrupts = <77 2 0 0>;
};
dma-channel@400 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x400 0x80>;
interrupts = <78 2 0 0>;
};
dma-channel@480 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x480 0x80>;
interrupts = <79 2 0 0>;
};
};
Note on DMA channel compatible properties: The compatible property must say
"fsl,elo-dma-channel" or "fsl,eloplus-dma-channel" to be used by the Elo DMA
driver (fsldma). Any DMA channel used by fsldma cannot be used by another

2
Documentation/devicetree/bindings/pwm/pwm-samsung.txt
View File

@ -15,7 +15,7 @@ Required properties:
samsung,s5pc100-pwm - for 32-bit timers present on S5PC100, S5PV210,
Exynos4210 rev0 SoCs
samsung,exynos4210-pwm - for 32-bit timers present on Exynos4210,
Exynos4x12 and Exynos5250 SoCs
Exynos4x12, Exynos5250 and Exynos5420 SoCs
- reg: base address and size of register area
- interrupts: list of timer interrupts (one interrupt per timer, starting at
timer 0)

17
Documentation/devicetree/bindings/rng/qcom,prng.txt Normal file
View File

@ -0,0 +1,17 @@
Qualcomm MSM pseudo random number generator.
Required properties:
- compatible : should be "qcom,prng"
- reg : specifies base physical address and size of the registers map
- clocks : phandle to clock-controller plus clock-specifier pair
- clock-names : "core" clocks all registers, FIFO and circuits in PRNG IP block
Example:
rng@f9bff000 {
compatible = "qcom,prng";
reg = <0xf9bff000 0x200>;
clocks = <&clock GCC_PRNG_AHB_CLK>;
clock-names = "core";
};

5
Documentation/devicetree/bindings/spi/nvidia,tegra20-spi.txt
View File

@ -1,5 +0,0 @@
NVIDIA Tegra 2 SPI device
Required properties:
- compatible : should be "nvidia,tegra20-spi".
- gpios : should specify GPIOs used for chipselect.

4
Documentation/devicetree/bindings/spi/omap-spi.txt
View File

@ -2,8 +2,8 @@ OMAP2+ McSPI device
Required properties:
- compatible :
- "ti,omap2-spi" for OMAP2 & OMAP3.
- "ti,omap4-spi" for OMAP4+.
- "ti,omap2-mcspi" for OMAP2 & OMAP3.
- "ti,omap4-mcspi" for OMAP4+.
- ti,spi-num-cs : Number of chipselect supported by the instance.
- ti,hwmods: Name of the hwmod associated to the McSPI
- ti,pindir-d0-out-d1-in: Select the D0 pin as output and D1 as

2
Documentation/devicetree/bindings/vendor-prefixes.txt
View File

@ -32,12 +32,14 @@ est ESTeem Wireless Modems
fsl Freescale Semiconductor
GEFanuc GE Fanuc Intelligent Platforms Embedded Systems, Inc.
gef GE Fanuc Intelligent Platforms Embedded Systems, Inc.
gmt Global Mixed-mode Technology, Inc.
hisilicon Hisilicon Limited.
hp Hewlett Packard
ibm International Business Machines (IBM)
idt Integrated Device Technologies, Inc.
img Imagination Technologies Ltd.
intercontrol Inter Control Group
lg LG Corporation
linux Linux-specific binding
lsi LSI Corp. (LSI Logic)
marvell Marvell Technology Group Ltd.

7
Documentation/devicetree/bindings/video/backlight/pwm-backlight.txt
View File

@ -10,12 +10,16 @@ Required properties:
last value in the array represents a 100% duty cycle (brightest).
- default-brightness-level: the default brightness level (index into the
array defined by the "brightness-levels" property)
- power-supply: regulator for supply voltage
Optional properties:
- pwm-names: a list of names for the PWM devices specified in the
"pwms" property (see PWM binding[0])
- enable-gpios: contains a single GPIO specifier for the GPIO which enables
and disables the backlight (see GPIO binding[1])
[0]: Documentation/devicetree/bindings/pwm/pwm.txt
[1]: Documentation/devicetree/bindings/gpio/gpio.txt
Example:
@ -25,4 +29,7 @@ Example:
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
power-supply = <&vdd_bl_reg>;
enable-gpios = <&gpio 58 0>;
};

21
Documentation/devicetree/bindings/watchdog/dw_wdt.txt Normal file
View File

@ -0,0 +1,21 @@
Synopsys Designware Watchdog Timer
Required Properties:
- compatible : Should contain "snps,dw-wdt"
- reg : Base address and size of the watchdog timer registers.
- clocks : phandle + clock-specifier for the clock that drives the
watchdog timer.
Optional Properties:
- interrupts : The interrupt used for the watchdog timeout warning.
Example:
watchdog0: wd@ffd02000 {
compatible = "snps,dw-wdt";
reg = <0xffd02000 0x1000>;
interrupts = <0 171 4>;
clocks = <&per_base_clk>;
};

0
Documentation/devicetree/bindings/gpio/men-a021-wdt.txt → Documentation/devicetree/bindings/watchdog/men-a021-wdt.txt
View File

15
Documentation/devicetree/bindings/watchdog/moxa,moxart-watchdog.txt Normal file
View File

@ -0,0 +1,15 @@
MOXA ART Watchdog timer
Required properties:
- compatible : Must be "moxa,moxart-watchdog"
- reg : Should contain registers location and length
- clocks : Should contain phandle for the clock that drives the counter
Example:
watchdog: watchdog@98500000 {
compatible = "moxa,moxart-watchdog";
reg = <0x98500000 0x10>;
clocks = <&coreclk>;
};

19
Documentation/devicetree/bindings/watchdog/rt2880-wdt.txt Normal file
View File

@ -0,0 +1,19 @@
Ralink Watchdog Timers
Required properties:
- compatible: must be "ralink,rt2880-wdt"
- reg: physical base address of the controller and length of the register range
Optional properties:
- interrupt-parent: phandle to the INTC device node
- interrupts: Specify the INTC interrupt number
Example:
watchdog@120 {
compatible = "ralink,rt2880-wdt";
reg = <0x120 0x10>;
interrupt-parent = <&intc>;
interrupts = <1>;
};

14
Documentation/devicetree/bindings/watchdog/sirfsoc_wdt.txt Normal file
View File

@ -0,0 +1,14 @@
SiRFSoC Timer and Watchdog Timer(WDT) Controller
Required properties:
- compatible: "sirf,prima2-tick"
- reg: Address range of tick timer/WDT register set
- interrupts: interrupt number to the cpu
Example:
timer@b0020000 {
compatible = "sirf,prima2-tick";
reg = <0xb0020000 0x1000>;
interrupts = <0>;
};

68
Documentation/dmatest.txt
View File

@ -15,39 +15,48 @@ be built as module or inside kernel. Let's consider those cases.
Part 2 - When dmatest is built as a module...
After mounting debugfs and loading the module, the /sys/kernel/debug/dmatest
folder with nodes will be created. There are two important files located. First
is the 'run' node that controls run and stop phases of the test, and the second
one, 'results', is used to get the test case results.
Note that in this case test will not run on load automatically.
Example of usage:
% modprobe dmatest channel=dma0chan0 timeout=2000 iterations=1 run=1
...or:
% modprobe dmatest
% echo dma0chan0 > /sys/module/dmatest/parameters/channel
% echo 2000 > /sys/module/dmatest/parameters/timeout
% echo 1 > /sys/module/dmatest/parameters/iterations
% echo 1 > /sys/kernel/debug/dmatest/run
% echo 1 > /sys/module/dmatest/parameters/run
...or on the kernel command line:
dmatest.channel=dma0chan0 dmatest.timeout=2000 dmatest.iterations=1 dmatest.run=1
Hint: available channel list could be extracted by running the following
command:
% ls -1 /sys/class/dma/
After a while you will start to get messages about current status or error like
in the original code.
Once started a message like "dmatest: Started 1 threads using dma0chan0" is
emitted. After that only test failure messages are reported until the test
stops.
Note that running a new test will not stop any in progress test.
The following command should return actual state of the test.
% cat /sys/kernel/debug/dmatest/run
The following command returns the state of the test.
% cat /sys/module/dmatest/parameters/run
To wait for test done the user may perform a busy loop that checks the state.
To wait for test completion userpace can poll 'run' until it is false, or use
the wait parameter. Specifying 'wait=1' when loading the module causes module
initialization to pause until a test run has completed, while reading
/sys/module/dmatest/parameters/wait waits for any running test to complete
before returning. For example, the following scripts wait for 42 tests
to complete before exiting. Note that if 'iterations' is set to 'infinite' then
waiting is disabled.
% while [ $(cat /sys/kernel/debug/dmatest/run) = "Y" ]
> do
> echo -n "."
> sleep 1
> done
> echo
Example:
% modprobe dmatest run=1 iterations=42 wait=1
% modprobe -r dmatest
...or:
% modprobe dmatest run=1 iterations=42
% cat /sys/module/dmatest/parameters/wait
% modprobe -r dmatest
Part 3 - When built-in in the kernel...
@ -62,21 +71,22 @@ case. You always could check them at run-time by running
Part 4 - Gathering the test results
The module provides a storage for the test results in the memory. The gathered
data could be used after test is done.
Test results are printed to the kernel log buffer with the format:
The special file 'results' in the debugfs represents gathered data of the in
progress test. The messages collected are printed to the kernel log as well.
"dmatest: result <channel>: <test id>: '<error msg>' with src_off=<val> dst_off=<val> len=<val> (<err code>)"
Example of output:
% cat /sys/kernel/debug/dmatest/results
dma0chan0-copy0: #1: No errors with src_off=0x7bf dst_off=0x8ad len=0x3fea (0)
% dmesg | tail -n 1
dmatest: result dma0chan0-copy0: #1: No errors with src_off=0x7bf dst_off=0x8ad len=0x3fea (0)
The message format is unified across the different types of errors. A number in
the parens represents additional information, e.g. error code, error counter,
or status.
or status. A test thread also emits a summary line at completion listing the
number of tests executed, number that failed, and a result code.
Comparison between buffers is stored to the dedicated structure.
Example:
% dmesg | tail -n 1
dmatest: dma0chan0-copy0: summary 1 test, 0 failures 1000 iops 100000 KB/s (0)
Note that the verify result is now accessible only via file 'results' in the
debugfs.
The details of a data miscompare error are also emitted, but do not follow the
above format.

34
Documentation/filesystems/btrfs.txt
View File

@ -70,6 +70,12 @@ Unless otherwise specified, all options default to off.
See comments at the top of fs/btrfs/check-integrity.c for more info.
commit=<seconds>
Set the interval of periodic commit, 30 seconds by default. Higher
values defer data being synced to permanent storage with obvious
consequences when the system crashes. The upper bound is not forced,
but a warning is printed if it's more than 300 seconds (5 minutes).
compress
compress=<type>
compress-force
@ -154,7 +160,11 @@ Unless otherwise specified, all options default to off.
Currently this scans a list of several previous tree roots and tries to
use the first readable.
skip_balance
rescan_uuid_tree
Force check and rebuild procedure of the UUID tree. This should not
normally be needed.
skip_balance
Skip automatic resume of interrupted balance operation after mount.
May be resumed with "btrfs balance resume."
@ -234,24 +244,14 @@ available from the git repository at the following location:
These include the following tools:
mkfs.btrfs: create a filesystem
* mkfs.btrfs: create a filesystem
btrfsctl: control program to create snapshots and subvolumes:
* btrfs: a single tool to manage the filesystems, refer to the manpage for more details
mount /dev/sda2 /mnt
btrfsctl -s new_subvol_name /mnt
btrfsctl -s snapshot_of_default /mnt/default
btrfsctl -s snapshot_of_new_subvol /mnt/new_subvol_name
btrfsctl -s snapshot_of_a_snapshot /mnt/snapshot_of_new_subvol
ls /mnt
default snapshot_of_a_snapshot snapshot_of_new_subvol
new_subvol_name snapshot_of_default
* 'btrfsck' or 'btrfs check': do a consistency check of the filesystem
Snapshots and subvolumes cannot be deleted right now, but you can
rm -rf all the files and directories inside them.
Other tools for specific tasks:
btrfsck: do a limited check of the FS extent trees.
* btrfs-convert: in-place conversion from ext2/3/4 filesystems
btrfs-debug-tree: print all of the FS metadata in text form. Example:
btrfs-debug-tree /dev/sda2 >& big_output_file
* btrfs-image: dump filesystem metadata for debugging

14
Documentation/gpio/00-INDEX Normal file
View File

@ -0,0 +1,14 @@
00-INDEX
- This file
gpio.txt
- Introduction to GPIOs and their kernel interfaces
consumer.txt
- How to obtain and use GPIOs in a driver
driver.txt
- How to write a GPIO driver
board.txt
- How to assign GPIOs to a consumer device and a function
sysfs.txt
- Information about the GPIO sysfs interface
gpio-legacy.txt
- Historical documentation of the deprecated GPIO integer interface

115
Documentation/gpio/board.txt Normal file
View File

@ -0,0 +1,115 @@
GPIO Mappings
=============
This document explains how GPIOs can be assigned to given devices and functions.
Note that it only applies to the new descriptor-based interface. For a
description of the deprecated integer-based GPIO interface please refer to
gpio-legacy.txt (actually, there is no real mapping possible with the old
interface; you just fetch an integer from somewhere and request the
corresponding GPIO.
Platforms that make use of GPIOs must select ARCH_REQUIRE_GPIOLIB (if GPIO usage
is mandatory) or ARCH_WANT_OPTIONAL_GPIOLIB (if GPIO support can be omitted) in
their Kconfig. Then, how GPIOs are mapped depends on what the platform uses to
describe its hardware layout. Currently, mappings can be defined through device
tree, ACPI, and platform data.
Device Tree
-----------
GPIOs can easily be mapped to devices and functions in the device tree. The
exact way to do it depends on the GPIO controller providing the GPIOs, see the
device tree bindings for your controller.
GPIOs mappings are defined in the consumer device's node, in a property named
<function>-gpios, where <function> is the function the driver will request
through gpiod_get(). For example:
foo_device {
compatible = "acme,foo";
...
led-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>, /* red */
<&gpio 16 GPIO_ACTIVE_HIGH>, /* green */
<&gpio 17 GPIO_ACTIVE_HIGH>; /* blue */
power-gpio = <&gpio 1 GPIO_ACTIVE_LOW>;
};
This property will make GPIOs 15, 16 and 17 available to the driver under the
"led" function, and GPIO 1 as the "power" GPIO:
struct gpio_desc *red, *green, *blue, *power;
red = gpiod_get_index(dev, "led", 0);
green = gpiod_get_index(dev, "led", 1);
blue = gpiod_get_index(dev, "led", 2);
power = gpiod_get(dev, "power");
The led GPIOs will be active-high, while the power GPIO will be active-low (i.e.
gpiod_is_active_low(power) will be true).
ACPI
----
ACPI does not support function names for GPIOs. Therefore, only the "idx"
argument of gpiod_get_index() is useful to discriminate between GPIOs assigned
to a device. The "con_id" argument can still be set for debugging purposes (it
will appear under error messages as well as debug and sysfs nodes).
Platform Data
-------------
Finally, GPIOs can be bound to devices and functions using platform data. Board
files that desire to do so need to include the following header:
#include <linux/gpio/driver.h>
GPIOs are mapped by the means of tables of lookups, containing instances of the
gpiod_lookup structure. Two macros are defined to help declaring such mappings:
GPIO_LOOKUP(chip_label, chip_hwnum, dev_id, con_id, flags)
GPIO_LOOKUP_IDX(chip_label, chip_hwnum, dev_id, con_id, idx, flags)
where
- chip_label is the label of the gpiod_chip instance providing the GPIO
- chip_hwnum is the hardware number of the GPIO within the chip
- dev_id is the identifier of the device that will make use of this GPIO. If
NULL, the GPIO will be available to all devices.
- con_id is the name of the GPIO function from the device point of view. It
can be NULL.
- idx is the index of the GPIO within the function.
- flags is defined to specify the following properties:
* GPIOF_ACTIVE_LOW - to configure the GPIO as active-low
* GPIOF_OPEN_DRAIN - GPIO pin is open drain type.
* GPIOF_OPEN_SOURCE - GPIO pin is open source type.
In the future, these flags might be extended to support more properties.
Note that GPIO_LOOKUP() is just a shortcut to GPIO_LOOKUP_IDX() where idx = 0.
A lookup table can then be defined as follows:
struct gpiod_lookup gpios_table[] = {
GPIO_LOOKUP_IDX("gpio.0", 15, "foo.0", "led", 0, GPIO_ACTIVE_HIGH),
GPIO_LOOKUP_IDX("gpio.0", 16, "foo.0", "led", 1, GPIO_ACTIVE_HIGH),
GPIO_LOOKUP_IDX("gpio.0", 17, "foo.0", "led", 2, GPIO_ACTIVE_HIGH),
GPIO_LOOKUP("gpio.0", 1, "foo.0", "power", GPIO_ACTIVE_LOW),
};
And the table can be added by the board code as follows:
gpiod_add_table(gpios_table, ARRAY_SIZE(gpios_table));
The driver controlling "foo.0" will then be able to obtain its GPIOs as follows:
struct gpio_desc *red, *green, *blue, *power;
red = gpiod_get_index(dev, "led", 0);
green = gpiod_get_index(dev, "led", 1);
blue = gpiod_get_index(dev, "led", 2);
power = gpiod_get(dev, "power");
gpiod_direction_output(power, 1);
Since the "power" GPIO is mapped as active-low, its actual signal will be 0
after this code. Contrary to the legacy integer GPIO interface, the active-low
property is handled during mapping and is thus transparent to GPIO consumers.

197
Documentation/gpio/consumer.txt Normal file
View File

@ -0,0 +1,197 @@
GPIO Descriptor Consumer Interface
==================================
This document describes the consumer interface of the GPIO framework. Note that
it describes the new descriptor-based interface. For a description of the
deprecated integer-based GPIO interface please refer to gpio-legacy.txt.
Guidelines for GPIOs consumers
==============================
Drivers that can't work without standard GPIO calls should have Kconfig entries
that depend on GPIOLIB. The functions that allow a driver to obtain and use
GPIOs are available by including the following file:
#include <linux/gpio/consumer.h>
All the functions that work with the descriptor-based GPIO interface are
prefixed with gpiod_. The gpio_ prefix is used for the legacy interface. No
other function in the kernel should use these prefixes.
Obtaining and Disposing GPIOs
=============================
With the descriptor-based interface, GPIOs are identified with an opaque,
non-forgeable handler that must be obtained through a call to one of the
gpiod_get() functions. Like many other kernel subsystems, gpiod_get() takes the
device that will use the GPIO and the function the requested GPIO is supposed to
fulfill:
struct gpio_desc *gpiod_get(struct device *dev, const char *con_id)
If a function is implemented by using several GPIOs together (e.g. a simple LED
device that displays digits), an additional index argument can be specified:
struct gpio_desc *gpiod_get_index(struct device *dev,
const char *con_id, unsigned int idx)
Both functions return either a valid GPIO descriptor, or an error code checkable
with IS_ERR(). They will never return a NULL pointer.
Device-managed variants of these functions are also defined:
struct gpio_desc *devm_gpiod_get(struct device *dev, const char *con_id)
struct gpio_desc *devm_gpiod_get_index(struct device *dev,
const char *con_id,
unsigned int idx)
A GPIO descriptor can be disposed of using the gpiod_put() function:
void gpiod_put(struct gpio_desc *desc)
It is strictly forbidden to use a descriptor after calling this function. The
device-managed variant is, unsurprisingly:
void devm_gpiod_put(struct device *dev, struct gpio_desc *desc)
Using GPIOs
===========
Setting Direction
-----------------
The first thing a driver must do with a GPIO is setting its direction. This is
done by invoking one of the gpiod_direction_*() functions:
int gpiod_direction_input(struct gpio_desc *desc)
int gpiod_direction_output(struct gpio_desc *desc, int value)
The return value is zero for success, else a negative errno. It should be
checked, since the get/set calls don't return errors and since misconfiguration
is possible. You should normally issue these calls from a task context. However,
for spinlock-safe GPIOs it is OK to use them before tasking is enabled, as part
of early board setup.
For output GPIOs, the value provided becomes the initial output value. This
helps avoid signal glitching during system startup.
A driver can also query the current direction of a GPIO:
int gpiod_get_direction(const struct gpio_desc *desc)
This function will return either GPIOF_DIR_IN or GPIOF_DIR_OUT.
Be aware that there is no default direction for GPIOs. Therefore, **using a GPIO
without setting its direction first is illegal and will result in undefined
behavior!**
Spinlock-Safe GPIO Access
-------------------------
Most GPIO controllers can be accessed with memory read/write instructions. Those
don't need to sleep, and can safely be done from inside hard (non-threaded) IRQ
handlers and similar contexts.
Use the following calls to access GPIOs from an atomic context:
int gpiod_get_value(const struct gpio_desc *desc);
void gpiod_set_value(struct gpio_desc *desc, int value);
The values are boolean, zero for low, nonzero for high. When reading the value
of an output pin, the value returned should be what's seen on the pin. That
won't always match the specified output value, because of issues including
open-drain signaling and output latencies.
The get/set calls do not return errors because "invalid GPIO" should have been
reported earlier from gpiod_direction_*(). However, note that not all platforms
can read the value of output pins; those that can't should always return zero.
Also, using these calls for GPIOs that can't safely be accessed without sleeping
(see below) is an error.
GPIO Access That May Sleep
--------------------------
Some GPIO controllers must be accessed using message based buses like I2C or
SPI. Commands to read or write those GPIO values require waiting to get to the
head of a queue to transmit a command and get its response. This requires
sleeping, which can't be done from inside IRQ handlers.
Platforms that support this type of GPIO distinguish them from other GPIOs by
returning nonzero from this call:
int gpiod_cansleep(const struct gpio_desc *desc)
To access such GPIOs, a different set of accessors is defined:
int gpiod_get_value_cansleep(const struct gpio_desc *desc)
void gpiod_set_value_cansleep(struct gpio_desc *desc, int value)
Accessing such GPIOs requires a context which may sleep, for example a threaded
IRQ handler, and those accessors must be used instead of spinlock-safe
accessors without the cansleep() name suffix.
Other than the fact that these accessors might sleep, and will work on GPIOs
that can't be accessed from hardIRQ handlers, these calls act the same as the
spinlock-safe calls.
Active-low State and Raw GPIO Values
------------------------------------
Device drivers like to manage the logical state of a GPIO, i.e. the value their
device will actually receive, no matter what lies between it and the GPIO line.
In some cases, it might make sense to control the actual GPIO line value. The
following set of calls ignore the active-low property of a GPIO and work on the
raw line value:
int gpiod_get_raw_value(const struct gpio_desc *desc)
void gpiod_set_raw_value(struct gpio_desc *desc, int value)
int gpiod_get_raw_value_cansleep(const struct gpio_desc *desc)
void gpiod_set_raw_value_cansleep(struct gpio_desc *desc, int value)
The active-low state of a GPIO can also be queried using the following call:
int gpiod_is_active_low(const struct gpio_desc *desc)
Note that these functions should only be used with great moderation ; a driver
should not have to care about the physical line level.
GPIOs mapped to IRQs
--------------------
GPIO lines can quite often be used as IRQs. You can get the IRQ number
corresponding to a given GPIO using the following call:
int gpiod_to_irq(const struct gpio_desc *desc)
It will return an IRQ number, or an negative errno code if the mapping can't be
done (most likely because that particular GPIO cannot be used as IRQ). It is an
unchecked error to use a GPIO that wasn't set up as an input using
gpiod_direction_input(), or to use an IRQ number that didn't originally come
from gpiod_to_irq(). gpiod_to_irq() is not allowed to sleep.
Non-error values returned from gpiod_to_irq() can be passed to request_irq() or
free_irq(). They will often be stored into IRQ resources for platform devices,
by the board-specific initialization code. Note that IRQ trigger options are
part of the IRQ interface, e.g. IRQF_TRIGGER_FALLING, as are system wakeup
capabilities.
Interacting With the Legacy GPIO Subsystem
==========================================
Many kernel subsystems still handle GPIOs using the legacy integer-based
interface. Although it is strongly encouraged to upgrade them to the safer
descriptor-based API, the following two functions allow you to convert a GPIO
descriptor into the GPIO integer namespace and vice-versa:
int desc_to_gpio(const struct gpio_desc *desc)
struct gpio_desc *gpio_to_desc(unsigned gpio)
The GPIO number returned by desc_to_gpio() can be safely used as long as the
GPIO descriptor has not been freed. All the same, a GPIO number passed to
gpio_to_desc() must have been properly acquired, and usage of the returned GPIO
descriptor is only possible after the GPIO number has been released.
Freeing a GPIO obtained by one API with the other API is forbidden and an
unchecked error.

75
Documentation/gpio/driver.txt Normal file
View File

@ -0,0 +1,75 @@
GPIO Descriptor Driver Interface
================================
This document serves as a guide for GPIO chip drivers writers. Note that it
describes the new descriptor-based interface. For a description of the
deprecated integer-based GPIO interface please refer to gpio-legacy.txt.
Each GPIO controller driver needs to include the following header, which defines
the structures used to define a GPIO driver:
#include <linux/gpio/driver.h>
Internal Representation of GPIOs
================================
Inside a GPIO driver, individual GPIOs are identified by their hardware number,
which is a unique number between 0 and n, n being the number of GPIOs managed by
the chip. This number is purely internal: the hardware number of a particular
GPIO descriptor is never made visible outside of the driver.
On top of this internal number, each GPIO also need to have a global number in
the integer GPIO namespace so that it can be used with the legacy GPIO
interface. Each chip must thus have a "base" number (which can be automatically
assigned), and for each GPIO the global number will be (base + hardware number).
Although the integer representation is considered deprecated, it still has many
users and thus needs to be maintained.
So for example one platform could use numbers 32-159 for GPIOs, with a
controller defining 128 GPIOs at a "base" of 32 ; while another platform uses
numbers 0..63 with one set of GPIO controllers, 64-79 with another type of GPIO
controller, and on one particular board 80-95 with an FPGA. The numbers need not
be contiguous; either of those platforms could also use numbers 2000-2063 to
identify GPIOs in a bank of I2C GPIO expanders.
Controller Drivers: gpio_chip
=============================
In the gpiolib framework each GPIO controller is packaged as a "struct
gpio_chip" (see linux/gpio/driver.h for its complete definition) with members
common to each controller of that type:
- methods to establish GPIO direction
- methods used to access GPIO values
- method to return the IRQ number associated to a given GPIO
- flag saying whether calls to its methods may sleep
- optional debugfs dump method (showing extra state like pullup config)
- optional base number (will be automatically assigned if omitted)
- label for diagnostics and GPIOs mapping using platform data
The code implementing a gpio_chip should support multiple instances of the
controller, possibly using the driver model. That code will configure each
gpio_chip and issue gpiochip_add(). Removing a GPIO controller should be rare;
use gpiochip_remove() when it is unavoidable.
Most often a gpio_chip is part of an instance-specific structure with state not
exposed by the GPIO interfaces, such as addressing, power management, and more.
Chips such as codecs will have complex non-GPIO state.
Any debugfs dump method should normally ignore signals which haven't been
requested as GPIOs. They can use gpiochip_is_requested(), which returns either
NULL or the label associated with that GPIO when it was requested.
Locking IRQ usage
-----------------
Input GPIOs can be used as IRQ signals. When this happens, a driver is requested
to mark the GPIO as being used as an IRQ:
int gpiod_lock_as_irq(struct gpio_desc *desc)
This will prevent the use of non-irq related GPIO APIs until the GPIO IRQ lock
is released:
void gpiod_unlock_as_irq(struct gpio_desc *desc)

0
Documentation/gpio.txt → Documentation/gpio/gpio-legacy.txt
View File

119
Documentation/gpio/gpio.txt Normal file
View File

@ -0,0 +1,119 @@
GPIO Interfaces
===============
The documents in this directory give detailed instructions on how to access
GPIOs in drivers, and how to write a driver for a device that provides GPIOs
itself.
Due to the history of GPIO interfaces in the kernel, there are two different
ways to obtain and use GPIOs:
- The descriptor-based interface is the preferred way to manipulate GPIOs,
and is described by all the files in this directory excepted gpio-legacy.txt.
- The legacy integer-based interface which is considered deprecated (but still
usable for compatibility reasons) is documented in gpio-legacy.txt.
The remainder of this document applies to the new descriptor-based interface.
gpio-legacy.txt contains the same information applied to the legacy
integer-based interface.
What is a GPIO?
===============
A "General Purpose Input/Output" (GPIO) is a flexible software-controlled
digital signal. They are provided from many kinds of chip, and are familiar
to Linux developers working with embedded and custom hardware. Each GPIO
represents a bit connected to a particular pin, or "ball" on Ball Grid Array
(BGA) packages. Board schematics show which external hardware connects to
which GPIOs. Drivers can be written generically, so that board setup code
passes such pin configuration data to drivers.
System-on-Chip (SOC) processors heavily rely on GPIOs. In some cases, every
non-dedicated pin can be configured as a GPIO; and most chips have at least
several dozen of them. Programmable logic devices (like FPGAs) can easily
provide GPIOs; multifunction chips like power managers, and audio codecs
often have a few such pins to help with pin scarcity on SOCs; and there are
also "GPIO Expander" chips that connect using the I2C or SPI serial buses.
Most PC southbridges have a few dozen GPIO-capable pins (with only the BIOS
firmware knowing how they're used).
The exact capabilities of GPIOs vary between systems. Common options:
- Output values are writable (high=1, low=0). Some chips also have
options about how that value is driven, so that for example only one
value might be driven, supporting "wire-OR" and similar schemes for the
other value (notably, "open drain" signaling).
- Input values are likewise readable (1, 0). Some chips support readback
of pins configured as "output", which is very useful in such "wire-OR"
cases (to support bidirectional signaling). GPIO controllers may have
input de-glitch/debounce logic, sometimes with software controls.
- Inputs can often be used as IRQ signals, often edge triggered but
sometimes level triggered. Such IRQs may be configurable as system
wakeup events, to wake the system from a low power state.
- Usually a GPIO will be configurable as either input or output, as needed
by different product boards; single direction ones exist too.
- Most GPIOs can be accessed while holding spinlocks, but those accessed
through a serial bus normally can't. Some systems support both types.
On a given board each GPIO is used for one specific purpose like monitoring
MMC/SD card insertion/removal, detecting card write-protect status, driving
a LED, configuring a transceiver, bit-banging a serial bus, poking a hardware
watchdog, sensing a switch, and so on.
Common GPIO Properties
======================
These properties are met through all the other documents of the GPIO interface
and it is useful to understand them, especially if you need to define GPIO
mappings.
Active-High and Active-Low
--------------------------
It is natural to assume that a GPIO is "active" when its output signal is 1
("high"), and inactive when it is 0 ("low"). However in practice the signal of a
GPIO may be inverted before is reaches its destination, or a device could decide
to have different conventions about what "active" means. Such decisions should
be transparent to device drivers, therefore it is possible to define a GPIO as
being either active-high ("1" means "active", the default) or active-low ("0"
means "active") so that drivers only need to worry about the logical signal and
not about what happens at the line level.
Open Drain and Open Source
--------------------------
Sometimes shared signals need to use "open drain" (where only the low signal
level is actually driven), or "open source" (where only the high signal level is
driven) signaling. That term applies to CMOS transistors; "open collector" is
used for TTL. A pullup or pulldown resistor causes the high or low signal level.
This is sometimes called a "wire-AND"; or more practically, from the negative
logic (low=true) perspective this is a "wire-OR".
One common example of an open drain signal is a shared active-low IRQ line.
Also, bidirectional data bus signals sometimes use open drain signals.
Some GPIO controllers directly support open drain and open source outputs; many
don't. When you need open drain signaling but your hardware doesn't directly
support it, there's a common idiom you can use to emulate it with any GPIO pin
that can be used as either an input or an output:
LOW: gpiod_direction_output(gpio, 0) ... this drives the signal and overrides
the pullup.
HIGH: gpiod_direction_input(gpio) ... this turns off the output, so the pullup
(or some other device) controls the signal.
The same logic can be applied to emulate open source signaling, by driving the
high signal and configuring the GPIO as input for low. This open drain/open
source emulation can be handled transparently by the GPIO framework.
If you are "driving" the signal high but gpiod_get_value(gpio) reports a low
value (after the appropriate rise time passes), you know some other component is
driving the shared signal low. That's not necessarily an error. As one common
example, that's how I2C clocks are stretched: a slave that needs a slower clock
delays the rising edge of SCK, and the I2C master adjusts its signaling rate
accordingly.

155
Documentation/gpio/sysfs.txt Normal file
View File

@ -0,0 +1,155 @@
GPIO Sysfs Interface for Userspace
==================================
Platforms which use the "gpiolib" implementors framework may choose to
configure a sysfs user interface to GPIOs. This is different from the
debugfs interface, since it provides control over GPIO direction and
value instead of just showing a gpio state summary. Plus, it could be
present on production systems without debugging support.
Given appropriate hardware documentation for the system, userspace could
know for example that GPIO #23 controls the write protect line used to
protect boot loader segments in flash memory. System upgrade procedures
may need to temporarily remove that protection, first importing a GPIO,
then changing its output state, then updating the code before re-enabling
the write protection. In normal use, GPIO #23 would never be touched,
and the kernel would have no need to know about it.
Again depending on appropriate hardware documentation, on some systems
userspace GPIO can be used to determine system configuration data that
standard kernels won't know about. And for some tasks, simple userspace
GPIO drivers could be all that the system really needs.
Note that standard kernel drivers exist for common "LEDs and Buttons"
GPIO tasks: "leds-gpio" and "gpio_keys", respectively. Use those
instead of talking directly to the GPIOs; they integrate with kernel
frameworks better than your userspace code could.
Paths in Sysfs
--------------
There are three kinds of entry in /sys/class/gpio:
- Control interfaces used to get userspace control over GPIOs;
- GPIOs themselves; and
- GPIO controllers ("gpio_chip" instances).
That's in addition to standard files including the "device" symlink.
The control interfaces are write-only:
/sys/class/gpio/
"export" ... Userspace may ask the kernel to export control of
a GPIO to userspace by writing its number to this file.
Example: "echo 19 > export" will create a "gpio19" node
for GPIO #19, if that's not requested by kernel code.
"unexport" ... Reverses the effect of exporting to userspace.
Example: "echo 19 > unexport" will remove a "gpio19"
node exported using the "export" file.
GPIO signals have paths like /sys/class/gpio/gpio42/ (for GPIO #42)
and have the following read/write attributes:
/sys/class/gpio/gpioN/
"direction" ... reads as either "in" or "out". This value may
normally be written. Writing as "out" defaults to
initializing the value as low. To ensure glitch free
operation, values "low" and "high" may be written to
configure the GPIO as an output with that initial value.
Note that this attribute *will not exist* if the kernel
doesn't support changing the direction of a GPIO, or
it was exported by kernel code that didn't explicitly
allow userspace to reconfigure this GPIO's direction.
"value" ... reads as either 0 (low) or 1 (high). If the GPIO
is configured as an output, this value may be written;
any nonzero value is treated as high.
If the pin can be configured as interrupt-generating interrupt
and if it has been configured to generate interrupts (see the
description of "edge"), you can poll(2) on that file and
poll(2) will return whenever the interrupt was triggered. If
you use poll(2), set the events POLLPRI and POLLERR. If you
use select(2), set the file descriptor in exceptfds. After
poll(2) returns, either lseek(2) to the beginning of the sysfs
file and read the new value or close the file and re-open it
to read the value.
"edge" ... reads as either "none", "rising", "falling", or
"both". Write these strings to select the signal edge(s)
that will make poll(2) on the "value" file return.
This file exists only if the pin can be configured as an
interrupt generating input pin.
"active_low" ... reads as either 0 (false) or 1 (true). Write
any nonzero value to invert the value attribute both
for reading and writing. Existing and subsequent
poll(2) support configuration via the edge attribute
for "rising" and "falling" edges will follow this
setting.
GPIO controllers have paths like /sys/class/gpio/gpiochip42/ (for the
controller implementing GPIOs starting at #42) and have the following
read-only attributes:
/sys/class/gpio/gpiochipN/
"base" ... same as N, the first GPIO managed by this chip
"label" ... provided for diagnostics (not always unique)
"ngpio" ... how many GPIOs this manges (N to N + ngpio - 1)
Board documentation should in most cases cover what GPIOs are used for
what purposes. However, those numbers are not always stable; GPIOs on
a daughtercard might be different depending on the base board being used,
or other cards in the stack. In such cases, you may need to use the
gpiochip nodes (possibly in conjunction with schematics) to determine
the correct GPIO number to use for a given signal.
Exporting from Kernel code
--------------------------
Kernel code can explicitly manage exports of GPIOs which have already been
requested using gpio_request():
/* export the GPIO to userspace */
int gpiod_export(struct gpio_desc *desc, bool direction_may_change);
/* reverse gpio_export() */
void gpiod_unexport(struct gpio_desc *desc);
/* create a sysfs link to an exported GPIO node */
int gpiod_export_link(struct device *dev, const char *name,
struct gpio_desc *desc);
/* change the polarity of a GPIO node in sysfs */
int gpiod_sysfs_set_active_low(struct gpio_desc *desc, int value);
After a kernel driver requests a GPIO, it may only be made available in
the sysfs interface by gpiod_export(). The driver can control whether the
signal direction may change. This helps drivers prevent userspace code
from accidentally clobbering important system state.
This explicit exporting can help with debugging (by making some kinds
of experiments easier), or can provide an always-there interface that's
suitable for documenting as part of a board support package.
After the GPIO has been exported, gpiod_export_link() allows creating
symlinks from elsewhere in sysfs to the GPIO sysfs node. Drivers can
use this to provide the interface under their own device in sysfs with
a descriptive name.
Drivers can use gpiod_sysfs_set_active_low() to hide GPIO line polarity
differences between boards from user space. Polarity change can be done both
before and after gpiod_export(), and previously enabled poll(2) support for
either rising or falling edge will be reconfigured to follow this setting.

1
Documentation/i2c/busses/i2c-i801
View File

@ -25,6 +25,7 @@ Supported adapters:
* Intel Avoton (SOC)
* Intel Wellsburg (PCH)
* Intel Coleto Creek (PCH)
* Intel Wildcat Point-LP (PCH)
Datasheets: Publicly available at the Intel website
On Intel Patsburg and later chipsets, both the normal host SMBus controller

11
Documentation/kernel-parameters.txt
View File

@ -1190,15 +1190,24 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
owned by uid=0.
ima_hash= [IMA]
Format: { "sha1" | "md5" }
Format: { md5 | sha1 | rmd160 | sha256 | sha384
| sha512 | ... }
default: "sha1"
The list of supported hash algorithms is defined
in crypto/hash_info.h.
ima_tcb [IMA]
Load a policy which meets the needs of the Trusted
Computing Base. This means IMA will measure all
programs exec'd, files mmap'd for exec, and all files
opened for read by uid=0.
ima_template= [IMA]
Select one of defined IMA measurements template formats.
Formats: { "ima" | "ima-ng" }
Default: "ima-ng"
init= [KNL]
Format: <full_path>
Run specified binary instead of /sbin/init as init

18
Documentation/mic/mpssd/mpssd.c
View File

@ -313,7 +313,7 @@ static struct mic_device_desc *get_device_desc(struct mic_info *mic, int type)
int i;
void *dp = get_dp(mic, type);
for (i = mic_aligned_size(struct mic_bootparam); i < PAGE_SIZE;
for (i = sizeof(struct mic_bootparam); i < PAGE_SIZE;
i += mic_total_desc_size(d)) {
d = dp + i;
@ -445,8 +445,8 @@ init_vr(struct mic_info *mic, int fd, int type,
__func__, mic->name, vr0->va, vr0->info, vr_size,
vring_size(MIC_VRING_ENTRIES, MIC_VIRTIO_RING_ALIGN));
mpsslog("magic 0x%x expected 0x%x\n",
vr0->info->magic, MIC_MAGIC + type);
assert(vr0->info->magic == MIC_MAGIC + type);
le32toh(vr0->info->magic), MIC_MAGIC + type);
assert(le32toh(vr0->info->magic) == MIC_MAGIC + type);
if (vr1) {
vr1->va = (struct mic_vring *)
&va[MIC_DEVICE_PAGE_END + vr_size];
@ -458,8 +458,8 @@ init_vr(struct mic_info *mic, int fd, int type,
__func__, mic->name, vr1->va, vr1->info, vr_size,
vring_size(MIC_VRING_ENTRIES, MIC_VIRTIO_RING_ALIGN));
mpsslog("magic 0x%x expected 0x%x\n",
vr1->info->magic, MIC_MAGIC + type + 1);
assert(vr1->info->magic == MIC_MAGIC + type + 1);
le32toh(vr1->info->magic), MIC_MAGIC + type + 1);
assert(le32toh(vr1->info->magic) == MIC_MAGIC + type + 1);
}
done:
return va;
@ -520,7 +520,7 @@ static void *
virtio_net(void *arg)
{
static __u8 vnet_hdr[2][sizeof(struct virtio_net_hdr)];
static __u8 vnet_buf[2][MAX_NET_PKT_SIZE] __aligned(64);
static __u8 vnet_buf[2][MAX_NET_PKT_SIZE] __attribute__ ((aligned(64)));
struct iovec vnet_iov[2][2] = {
{ { .iov_base = vnet_hdr[0], .iov_len = sizeof(vnet_hdr[0]) },
{ .iov_base = vnet_buf[0], .iov_len = sizeof(vnet_buf[0]) } },
@ -1412,6 +1412,12 @@ mic_config(void *arg)
}
do {
ret = lseek(fd, 0, SEEK_SET);
if (ret < 0) {
mpsslog("%s: Failed to seek to file start '%s': %s\n",
mic->name, pathname, strerror(errno));
goto close_error1;
}
ret = read(fd, value, sizeof(value));
if (ret < 0) {
mpsslog("%s: Failed to read sysfs entry '%s': %s\n",

3
Documentation/networking/ip-sysctl.txt
View File

@ -577,9 +577,6 @@ tcp_limit_output_bytes - INTEGER
typical pfifo_fast qdiscs.
tcp_limit_output_bytes limits the number of bytes on qdisc
or device to reduce artificial RTT/cwnd and reduce bufferbloat.
Note: For GSO/TSO enabled flows, we try to have at least two
packets in flight. Reducing tcp_limit_output_bytes might also
reduce the size of individual GSO packet (64KB being the max)
Default: 131072
tcp_challenge_ack_limit - INTEGER

8
Documentation/power/power_supply_class.txt
View File

@ -135,11 +135,11 @@ CAPACITY_LEVEL - capacity level. This corresponds to
POWER_SUPPLY_CAPACITY_LEVEL_*.
TEMP - temperature of the power supply.
TEMP_ALERT_MIN - minimum battery temperature alert value in milli centigrade.
TEMP_ALERT_MAX - maximum battery temperature alert value in milli centigrade.
TEMP_ALERT_MIN - minimum battery temperature alert.
TEMP_ALERT_MAX - maximum battery temperature alert.
TEMP_AMBIENT - ambient temperature.
TEMP_AMBIENT_ALERT_MIN - minimum ambient temperature alert value in milli centigrade.
TEMP_AMBIENT_ALERT_MAX - maximum ambient temperature alert value in milli centigrade.
TEMP_AMBIENT_ALERT_MIN - minimum ambient temperature alert.
TEMP_AMBIENT_ALERT_MAX - maximum ambient temperature alert.
TIME_TO_EMPTY - seconds left for battery to be considered empty (i.e.
while battery powers a load)

14
Documentation/power/runtime_pm.txt
View File

@ -547,13 +547,11 @@ helper functions described in Section 4. In that case, pm_runtime_resume()
should be used. Of course, for this purpose the device's runtime PM has to be
enabled earlier by calling pm_runtime_enable().
If the device bus type's or driver's ->probe() callback runs
pm_runtime_suspend() or pm_runtime_idle() or their asynchronous counterparts,
they will fail returning -EAGAIN, because the device's usage counter is
incremented by the driver core before executing ->probe(). Still, it may be
desirable to suspend the device as soon as ->probe() has finished, so the driver
core uses pm_runtime_put_sync() to invoke the subsystem-level idle callback for
the device at that time.
It may be desirable to suspend the device once ->probe() has finished.
Therefore the driver core uses the asyncronous pm_request_idle() to submit a
request to execute the subsystem-level idle callback for the device at that
time. A driver that makes use of the runtime autosuspend feature, may want to
update the last busy mark before returning from ->probe().
Moreover, the driver core prevents runtime PM callbacks from racing with the bus
notifier callback in __device_release_driver(), which is necessary, because the
@ -656,7 +654,7 @@ out the following operations:
__pm_runtime_disable() with 'false' as the second argument for every device
right before executing the subsystem-level .suspend_late() callback for it.
* During system resume it calls pm_runtime_enable() and pm_runtime_put_sync()
* During system resume it calls pm_runtime_enable() and pm_runtime_put()
for every device right after executing the subsystem-level .resume_early()
callback and right after executing the subsystem-level .resume() callback
for it, respectively.

4
Documentation/pwm.txt
View File

@ -39,7 +39,7 @@ New users should use the pwm_get() function and pass to it the consumer
device or a consumer name. pwm_put() is used to free the PWM device. Managed
variants of these functions, devm_pwm_get() and devm_pwm_put(), also exist.
After being requested a PWM has to be configured using:
After being requested, a PWM has to be configured using:
int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns);
@ -94,7 +94,7 @@ for new drivers to use the generic PWM framework.
A new PWM controller/chip can be added using pwmchip_add() and removed
again with pwmchip_remove(). pwmchip_add() takes a filled in struct
pwm_chip as argument which provides a description of the PWM chip, the
number of PWM devices provider by the chip and the chip-specific
number of PWM devices provided by the chip and the chip-specific
implementation of the supported PWM operations to the framework.
Locking

2
Documentation/security/00-INDEX
View File

@ -22,3 +22,5 @@ keys.txt
- description of the kernel key retention service.
tomoyo.txt
- documentation on the TOMOYO Linux Security Module.
IMA-templates.txt
- documentation on the template management mechanism for IMA.

87
Documentation/security/IMA-templates.txt Normal file
View File

@ -0,0 +1,87 @@
IMA Template Management Mechanism
==== INTRODUCTION ====
The original 'ima' template is fixed length, containing the filedata hash
and pathname. The filedata hash is limited to 20 bytes (md5/sha1).
The pathname is a null terminated string, limited to 255 characters.
To overcome these limitations and to add additional file metadata, it is
necessary to extend the current version of IMA by defining additional
templates. For example, information that could be possibly reported are
the inode UID/GID or the LSM labels either of the inode and of the process
that is accessing it.
However, the main problem to introduce this feature is that, each time
a new template is defined, the functions that generate and display
the measurements list would include the code for handling a new format
and, thus, would significantly grow over the time.
The proposed solution solves this problem by separating the template
management from the remaining IMA code. The core of this solution is the
definition of two new data structures: a template descriptor, to determine
which information should be included in the measurement list; a template
field, to generate and display data of a given type.
Managing templates with these structures is very simple. To support
a new data type, developers define the field identifier and implement
two functions, init() and show(), respectively to generate and display
measurement entries. Defining a new template descriptor requires
specifying the template format, a string of field identifiers separated
by the '|' character. While in the current implementation it is possible
to define new template descriptors only by adding their definition in the
template specific code (ima_template.c), in a future version it will be
possible to register a new template on a running kernel by supplying to IMA
the desired format string. In this version, IMA initializes at boot time
all defined template descriptors by translating the format into an array
of template fields structures taken from the set of the supported ones.
After the initialization step, IMA will call ima_alloc_init_template()
(new function defined within the patches for the new template management
mechanism) to generate a new measurement entry by using the template
descriptor chosen through the kernel configuration or through the newly
introduced 'ima_template=' kernel command line parameter. It is during this
phase that the advantages of the new architecture are clearly shown:
the latter function will not contain specific code to handle a given template
but, instead, it simply calls the init() method of the template fields
associated to the chosen template descriptor and store the result (pointer
to allocated data and data length) in the measurement entry structure.
The same mechanism is employed to display measurements entries.
The functions ima[_ascii]_measurements_show() retrieve, for each entry,
the template descriptor used to produce that entry and call the show()
method for each item of the array of template fields structures.
==== SUPPORTED TEMPLATE FIELDS AND DESCRIPTORS ====
In the following, there is the list of supported template fields
('<identifier>': description), that can be used to define new template
descriptors by adding their identifier to the format string
(support for more data types will be added later):
- 'd': the digest of the event (i.e. the digest of a measured file),
calculated with the SHA1 or MD5 hash algorithm;
- 'n': the name of the event (i.e. the file name), with size up to 255 bytes;
- 'd-ng': the digest of the event, calculated with an arbitrary hash
algorithm (field format: [<hash algo>:]digest, where the digest
prefix is shown only if the hash algorithm is not SHA1 or MD5);
- 'n-ng': the name of the event, without size limitations.
Below, there is the list of defined template descriptors:
- "ima": its format is 'd|n';
- "ima-ng" (default): its format is 'd-ng|n-ng'.
==== USE ====
To specify the template descriptor to be used to generate measurement entries,
currently the following methods are supported:
- select a template descriptor among those supported in the kernel
configuration ('ima-ng' is the default choice);
- specify a template descriptor name from the kernel command line through
the 'ima_template=' parameter.

20
Documentation/security/keys.txt
View File

@ -865,15 +865,14 @@ encountered:
calling processes has a searchable link to the key from one of its
keyrings. There are three functions for dealing with these:
key_ref_t make_key_ref(const struct key *key,
unsigned long possession);
key_ref_t make_key_ref(const struct key *key, bool possession);
struct key *key_ref_to_ptr(const key_ref_t key_ref);
unsigned long is_key_possessed(const key_ref_t key_ref);
bool is_key_possessed(const key_ref_t key_ref);
The first function constructs a key reference from a key pointer and
possession information (which must be 0 or 1 and not any other value).
possession information (which must be true or false).
The second function retrieves the key pointer from a reference and the
third retrieves the possession flag.
@ -961,14 +960,17 @@ payload contents" for more information.
the argument will not be parsed.
(*) Extra references can be made to a key by calling the following function:
(*) Extra references can be made to a key by calling one of the following
functions:
struct key *__key_get(struct key *key);
struct key *key_get(struct key *key);
These need to be disposed of by calling key_put() when they've been
finished with. The key pointer passed in will be returned. If the pointer
is NULL or CONFIG_KEYS is not set then the key will not be dereferenced and
no increment will take place.
Keys so references will need to be disposed of by calling key_put() when
they've been finished with. The key pointer passed in will be returned.
In the case of key_get(), if the pointer is NULL or CONFIG_KEYS is not set
then the key will not be dereferenced and no increment will take place.
(*) A key's serial number can be obtained by calling:

18
Documentation/target/tcm_mod_builder.py
View File

@ -440,15 +440,15 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name):
buf += " /*\n"
buf += " * Setup default attribute lists for various fabric->tf_cit_tmpl\n"
buf += " */\n"
buf += " TF_CIT_TMPL(fabric)->tfc_wwn_cit.ct_attrs = " + fabric_mod_name + "_wwn_attrs;\n"
buf += " TF_CIT_TMPL(fabric)->tfc_tpg_base_cit.ct_attrs = NULL;\n"
buf += " TF_CIT_TMPL(fabric)->tfc_tpg_attrib_cit.ct_attrs = NULL;\n"
buf += " TF_CIT_TMPL(fabric)->tfc_tpg_param_cit.ct_attrs = NULL;\n"
buf += " TF_CIT_TMPL(fabric)->tfc_tpg_np_base_cit.ct_attrs = NULL;\n"
buf += " TF_CIT_TMPL(fabric)->tfc_tpg_nacl_base_cit.ct_attrs = NULL;\n"
buf += " TF_CIT_TMPL(fabric)->tfc_tpg_nacl_attrib_cit.ct_attrs = NULL;\n"
buf += " TF_CIT_TMPL(fabric)->tfc_tpg_nacl_auth_cit.ct_attrs = NULL;\n"
buf += " TF_CIT_TMPL(fabric)->tfc_tpg_nacl_param_cit.ct_attrs = NULL;\n"
buf += " fabric->tf_cit_tmpl.tfc_wwn_cit.ct_attrs = " + fabric_mod_name + "_wwn_attrs;\n"
buf += " fabric->tf_cit_tmpl.tfc_tpg_base_cit.ct_attrs = NULL;\n"
buf += " fabric->tf_cit_tmpl.tfc_tpg_attrib_cit.ct_attrs = NULL;\n"
buf += " fabric->tf_cit_tmpl.tfc_tpg_param_cit.ct_attrs = NULL;\n"
buf += " fabric->tf_cit_tmpl.tfc_tpg_np_base_cit.ct_attrs = NULL;\n"
buf += " fabric->tf_cit_tmpl.tfc_tpg_nacl_base_cit.ct_attrs = NULL;\n"
buf += " fabric->tf_cit_tmpl.tfc_tpg_nacl_attrib_cit.ct_attrs = NULL;\n"
buf += " fabric->tf_cit_tmpl.tfc_tpg_nacl_auth_cit.ct_attrs = NULL;\n"
buf += " fabric->tf_cit_tmpl.tfc_tpg_nacl_param_cit.ct_attrs = NULL;\n"
buf += " /*\n"
buf += " * Register the fabric for use within TCM\n"
buf += " */\n"

6
Documentation/vm/split_page_table_lock
View File

@ -63,9 +63,9 @@ levels.
PMD split lock enabling requires pgtable_pmd_page_ctor() call on PMD table
allocation and pgtable_pmd_page_dtor() on freeing.
Allocation usually happens in pmd_alloc_one(), freeing in pmd_free(), but
make sure you cover all PMD table allocation / freeing paths: i.e X86_PAE
preallocate few PMDs on pgd_alloc().
Allocation usually happens in pmd_alloc_one(), freeing in pmd_free() and
pmd_free_tlb(), but make sure you cover all PMD table allocation / freeing
paths: i.e X86_PAE preallocate few PMDs on pgd_alloc().
With everything in place you can set CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK.

85
MAINTAINERS
View File

@ -893,19 +893,14 @@ F: arch/arm/include/asm/hardware/dec21285.h
F: arch/arm/mach-footbridge/
ARM/FREESCALE IMX / MXC ARM ARCHITECTURE
M: Shawn Guo <shawn.guo@linaro.org>
M: Sascha Hauer <kernel@pengutronix.de>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
T: git git://git.pengutronix.de/git/imx/linux-2.6.git
F: arch/arm/mach-imx/
F: arch/arm/configs/imx*_defconfig
ARM/FREESCALE IMX6
M: Shawn Guo <shawn.guo@linaro.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
T: git git://git.linaro.org/people/shawnguo/linux-2.6.git
F: arch/arm/mach-imx/*imx6*
F: arch/arm/mach-imx/
F: arch/arm/boot/dts/imx*
F: arch/arm/configs/imx*_defconfig
ARM/FREESCALE MXS ARM ARCHITECTURE
M: Shawn Guo <shawn.guo@linaro.org>
@ -1070,7 +1065,6 @@ S: Maintained
ARM/NOMADIK ARCHITECTURE
M: Alessandro Rubini <rubini@unipv.it>
M: Linus Walleij <linus.walleij@linaro.org>
M: STEricsson <STEricsson_nomadik_linux@list.st.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-nomadik/
@ -1426,7 +1420,7 @@ M: Wolfram Sang <wsa@the-dreams.de>
L: linux-i2c@vger.kernel.org
S: Maintained
F: drivers/misc/eeprom/at24.c
F: include/linux/i2c/at24.h
F: include/linux/platform_data/at24.h
ATA OVER ETHERNET (AOE) DRIVER
M: "Ed L. Cashin" <ecashin@coraid.com>
@ -1935,7 +1929,8 @@ S: Maintained
F: drivers/gpio/gpio-bt8xx.c
BTRFS FILE SYSTEM
M: Chris Mason <chris.mason@fusionio.com>
M: Chris Mason <clm@fb.com>
M: Josef Bacik <jbacik@fb.com>
L: linux-btrfs@vger.kernel.org
W: http://btrfs.wiki.kernel.org/
Q: http://patchwork.kernel.org/project/linux-btrfs/list/
@ -2138,11 +2133,17 @@ S: Maintained
F: Documentation/zh_CN/
CHIPIDEA USB HIGH SPEED DUAL ROLE CONTROLLER
M: Alexander Shishkin <alexander.shishkin@linux.intel.com>
M: Peter Chen <Peter.Chen@freescale.com>
T: git://github.com/hzpeterchen/linux-usb.git
L: linux-usb@vger.kernel.org
S: Maintained
F: drivers/usb/chipidea/
CHROME HARDWARE PLATFORM SUPPORT
M: Olof Johansson <olof@lixom.net>
S: Maintained
F: drivers/platform/chrome/
CISCO VIC ETHERNET NIC DRIVER
M: Christian Benvenuti <benve@cisco.com>
M: Sujith Sankar <ssujith@cisco.com>
@ -2469,7 +2470,7 @@ S: Maintained
F: drivers/media/dvb-frontends/cxd2820r*
CXGB3 ETHERNET DRIVER (CXGB3)
M: Divy Le Ray <divy@chelsio.com>
M: Santosh Raspatur <santosh@chelsio.com>
L: netdev@vger.kernel.org
W: http://www.chelsio.com
S: Supported
@ -3064,6 +3065,14 @@ W: bluesmoke.sourceforge.net
S: Maintained
F: drivers/edac/amd64_edac*
EDAC-CALXEDA
M: Doug Thompson <dougthompson@xmission.com>
M: Robert Richter <rric@kernel.org>
L: linux-edac@vger.kernel.org
W: bluesmoke.sourceforge.net
S: Maintained
F: drivers/edac/highbank*
EDAC-CAVIUM
M: Ralf Baechle <ralf@linux-mips.org>
M: David Daney <david.daney@cavium.com>
@ -3145,6 +3154,13 @@ W: bluesmoke.sourceforge.net
S: Maintained
F: drivers/edac/i82975x_edac.c
EDAC-MPC85XX
M: Johannes Thumshirn <johannes.thumshirn@men.de>
L: linux-edac@vger.kernel.org
W: bluesmoke.sourceforge.net
S: Maintained
F: drivers/edac/mpc85xx_edac.[ch]
EDAC-PASEMI
M: Egor Martovetsky <egor@pasemi.com>
L: linux-edac@vger.kernel.org
@ -4024,12 +4040,26 @@ W: http://artax.karlin.mff.cuni.cz/~mikulas/vyplody/hpfs/index-e.cgi
S: Maintained
F: fs/hpfs/
HSI SUBSYSTEM
M: Sebastian Reichel <sre@debian.org>
S: Maintained
F: Documentation/ABI/testing/sysfs-bus-hsi
F: drivers/hsi/
F: include/linux/hsi/
F: include/uapi/linux/hsi/
HSO 3G MODEM DRIVER
M: Jan Dumon <j.dumon@option.com>
W: http://www.pharscape.org
S: Maintained
F: drivers/net/usb/hso.c
HSR NETWORK PROTOCOL
M: Arvid Brodin <arvid.brodin@alten.se>
L: netdev@vger.kernel.org
S: Maintained
F: net/hsr/
HTCPEN TOUCHSCREEN DRIVER
M: Pau Oliva Fora <pof@eslack.org>
L: linux-input@vger.kernel.org
@ -4051,6 +4081,7 @@ F: arch/x86/include/uapi/asm/hyperv.h
F: arch/x86/kernel/cpu/mshyperv.c
F: drivers/hid/hid-hyperv.c
F: drivers/hv/
F: drivers/input/serio/hyperv-keyboard.c
F: drivers/net/hyperv/
F: drivers/scsi/storvsc_drv.c
F: drivers/video/hyperv_fb.c
@ -5241,7 +5272,7 @@ S: Maintained
F: Documentation/lockdep*.txt
F: Documentation/lockstat.txt
F: include/linux/lockdep.h
F: kernel/lockdep*
F: kernel/locking/
LOGICAL DISK MANAGER SUPPORT (LDM, Windows 2000/XP/Vista Dynamic Disks)
M: "Richard Russon (FlatCap)" <ldm@flatcap.org>
@ -5953,10 +5984,10 @@ F: drivers/nfc/
F: include/linux/platform_data/pn544.h
NFS, SUNRPC, AND LOCKD CLIENTS
M: Trond Myklebust <Trond.Myklebust@netapp.com>
M: Trond Myklebust <trond.myklebust@primarydata.com>
L: linux-nfs@vger.kernel.org
W: http://client.linux-nfs.org
T: git git://git.linux-nfs.org/pub/linux/nfs-2.6.git
T: git git://git.linux-nfs.org/projects/trondmy/linux-nfs.git
S: Maintained
F: fs/lockd/
F: fs/nfs/
@ -6223,8 +6254,8 @@ OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS
M: Rob Herring <rob.herring@calxeda.com>
M: Pawel Moll <pawel.moll@arm.com>
M: Mark Rutland <mark.rutland@arm.com>
M: Stephen Warren <swarren@wwwdotorg.org>
M: Ian Campbell <ijc+devicetree@hellion.org.uk>
M: Kumar Gala <galak@codeaurora.org>
L: devicetree@vger.kernel.org
S: Maintained
F: Documentation/devicetree/
@ -6785,8 +6816,7 @@ PWM SUBSYSTEM
M: Thierry Reding <thierry.reding@gmail.com>
L: linux-pwm@vger.kernel.org
S: Maintained
W: http://gitorious.org/linux-pwm
T: git git://gitorious.org/linux-pwm/linux-pwm.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm.git
F: Documentation/pwm.txt
F: Documentation/devicetree/bindings/pwm/
F: include/linux/pwm.h
@ -7366,7 +7396,6 @@ S: Maintained
F: kernel/sched/
F: include/linux/sched.h
F: include/uapi/linux/sched.h
F: kernel/wait.c
F: include/linux/wait.h
SCORE ARCHITECTURE
@ -7502,9 +7531,10 @@ SELINUX SECURITY MODULE
M: Stephen Smalley <sds@tycho.nsa.gov>
M: James Morris <james.l.morris@oracle.com>
M: Eric Paris <eparis@parisplace.org>
M: Paul Moore <paul@paul-moore.com>
L: selinux@tycho.nsa.gov (subscribers-only, general discussion)
W: http://selinuxproject.org
T: git git://git.infradead.org/users/eparis/selinux.git
T: git git://git.infradead.org/users/pcmoore/selinux
S: Supported
F: include/linux/selinux*
F: security/selinux/
@ -8651,6 +8681,7 @@ F: drivers/media/usb/tm6000/
TPM DEVICE DRIVER
M: Leonidas Da Silva Barbosa <leosilva@linux.vnet.ibm.com>
M: Ashley Lai <ashley@ashleylai.com>
M: Peter Huewe <peterhuewe@gmx.de>
M: Rajiv Andrade <mail@srajiv.net>
W: http://tpmdd.sourceforge.net
M: Marcel Selhorst <tpmdd@selhorst.net>
@ -8947,8 +8978,8 @@ USB PEGASUS DRIVER
M: Petko Manolov <petkan@nucleusys.com>
L: linux-usb@vger.kernel.org
L: netdev@vger.kernel.org
T: git git://git.code.sf.net/p/pegasus2/git
W: http://pegasus2.sourceforge.net/
T: git git://github.com/petkan/pegasus.git
W: https://github.com/petkan/pegasus
S: Maintained
F: drivers/net/usb/pegasus.*
@ -8969,8 +9000,8 @@ USB RTL8150 DRIVER
M: Petko Manolov <petkan@nucleusys.com>
L: linux-usb@vger.kernel.org
L: netdev@vger.kernel.org
T: git git://git.code.sf.net/p/pegasus2/git
W: http://pegasus2.sourceforge.net/
T: git git://github.com/petkan/rtl8150.git
W: https://github.com/petkan/rtl8150
S: Maintained
F: drivers/net/usb/rtl8150.c
@ -9509,8 +9540,8 @@ F: drivers/xen/*swiotlb*
XFS FILESYSTEM
P: Silicon Graphics Inc
M: Dave Chinner <dchinner@fromorbit.com>
M: Ben Myers <bpm@sgi.com>
M: Alex Elder <elder@kernel.org>
M: xfs@oss.sgi.com
L: xfs@oss.sgi.com
W: http://oss.sgi.com/projects/xfs

4
Makefile
View File

@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 12
PATCHLEVEL = 13
SUBLEVEL = 0
EXTRAVERSION =
EXTRAVERSION = -rc3
NAME = One Giant Leap for Frogkind
# *DOCUMENTATION*

76
arch/alpha/Kconfig
View File

@ -16,8 +16,8 @@ config ALPHA
select ARCH_WANT_IPC_PARSE_VERSION
select ARCH_HAVE_NMI_SAFE_CMPXCHG
select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
select GENERIC_CLOCKEVENTS
select GENERIC_SMP_IDLE_THREAD
select GENERIC_CMOS_UPDATE
select GENERIC_STRNCPY_FROM_USER
select GENERIC_STRNLEN_USER
select HAVE_MOD_ARCH_SPECIFIC
@ -488,6 +488,20 @@ config VGA_HOSE
which always have multiple hoses, and whose consoles support it.
config ALPHA_QEMU
bool "Run under QEMU emulation"
depends on !ALPHA_GENERIC
---help---
Assume the presence of special features supported by QEMU PALcode
that reduce the overhead of system emulation.
Generic kernels will auto-detect QEMU. But when building a
system-specific kernel, the assumption is that we want to
elimiate as many runtime tests as possible.
If unsure, say N.
config ALPHA_SRM
bool "Use SRM as bootloader" if ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_NAUTILUS || ALPHA_NONAME
depends on TTY
@ -572,6 +586,30 @@ config NUMA
Access). This option is for configuring high-end multiprocessor
server machines. If in doubt, say N.
config ALPHA_WTINT
bool "Use WTINT" if ALPHA_SRM || ALPHA_GENERIC
default y if ALPHA_QEMU
default n if ALPHA_EV5 || ALPHA_EV56 || (ALPHA_EV4 && !ALPHA_LCA)
default n if !ALPHA_SRM && !ALPHA_GENERIC
default y if SMP
---help---
The Wait for Interrupt (WTINT) PALcall attempts to place the CPU
to sleep until the next interrupt. This may reduce the power
consumed, and the heat produced by the computer. However, it has
the side effect of making the cycle counter unreliable as a timing
device across the sleep.
For emulation under QEMU, definitely say Y here, as we have other
mechanisms for measuring time than the cycle counter.
For EV4 (but not LCA), EV5 and EV56 systems, or for systems running
MILO, sleep mode is not supported so you might as well say N here.
For SMP systems we cannot use the cycle counter for timing anyway,
so you might as well say Y here.
If unsure, say N.
config NODES_SHIFT
int
default "7"
@ -613,9 +651,41 @@ config VERBOSE_MCHECK_ON
Take the default (1) unless you want more control or more info.
choice
prompt "Timer interrupt frequency (HZ)?"
default HZ_128 if ALPHA_QEMU
default HZ_1200 if ALPHA_RAWHIDE
default HZ_1024
---help---
The frequency at which timer interrupts occur. A high frequency
minimizes latency, whereas a low frequency minimizes overhead of
process accounting. The later effect is especially significant
when being run under QEMU.
Note that some Alpha hardware cannot change the interrupt frequency
of the timer. If unsure, say 1024 (or 1200 for Rawhide).
config HZ_32
bool "32 Hz"
config HZ_64
bool "64 Hz"
config HZ_128
bool "128 Hz"
config HZ_256
bool "256 Hz"
config HZ_1024
bool "1024 Hz"
config HZ_1200
bool "1200 Hz"
endchoice
config HZ
int
default 1200 if ALPHA_RAWHIDE
int
default 32 if HZ_32
default 64 if HZ_64
default 128 if HZ_128
default 256 if HZ_256
default 1200 if HZ_1200
default 1024
source "drivers/pci/Kconfig"

22
arch/alpha/include/asm/machvec.h
View File

@ -33,6 +33,7 @@ struct alpha_machine_vector
int nr_irqs;
int rtc_port;
int rtc_boot_cpu_only;
unsigned int max_asn;
unsigned long max_isa_dma_address;
unsigned long irq_probe_mask;
@ -95,9 +96,6 @@ struct alpha_machine_vector
struct _alpha_agp_info *(*agp_info)(void);
unsigned int (*rtc_get_time)(struct rtc_time *);
int (*rtc_set_time)(struct rtc_time *);
const char *vector_name;
/* NUMA information */
@ -126,13 +124,19 @@ extern struct alpha_machine_vector alpha_mv;
#ifdef CONFIG_ALPHA_GENERIC
extern int alpha_using_srm;
extern int alpha_using_qemu;
#else
#ifdef CONFIG_ALPHA_SRM
#define alpha_using_srm 1
#else
#define alpha_using_srm 0
#endif
# ifdef CONFIG_ALPHA_SRM
# define alpha_using_srm 1
# else
# define alpha_using_srm 0
# endif
# ifdef CONFIG_ALPHA_QEMU
# define alpha_using_qemu 1
# else
# define alpha_using_qemu 0
# endif
#endif /* GENERIC */
#endif
#endif /* __KERNEL__ */
#endif /* __ALPHA_MACHVEC_H */

71
arch/alpha/include/asm/pal.h
View File

@ -89,6 +89,7 @@ __CALL_PAL_W1(wrmces, unsigned long);
__CALL_PAL_RW2(wrperfmon, unsigned long, unsigned long, unsigned long);
__CALL_PAL_W1(wrusp, unsigned long);
__CALL_PAL_W1(wrvptptr, unsigned long);
__CALL_PAL_RW1(wtint, unsigned long, unsigned long);
/*
* TB routines..
@ -111,5 +112,75 @@ __CALL_PAL_W1(wrvptptr, unsigned long);
#define tbiap() __tbi(-1, /* no second argument */)
#define tbia() __tbi(-2, /* no second argument */)
/*
* QEMU Cserv routines..
*/
static inline unsigned long
qemu_get_walltime(void)
{
register unsigned long v0 __asm__("$0");
register unsigned long a0 __asm__("$16") = 3;
asm("call_pal %2 # cserve get_time"
: "=r"(v0), "+r"(a0)
: "i"(PAL_cserve)
: "$17", "$18", "$19", "$20", "$21");
return v0;
}
static inline unsigned long
qemu_get_alarm(void)
{
register unsigned long v0 __asm__("$0");
register unsigned long a0 __asm__("$16") = 4;
asm("call_pal %2 # cserve get_alarm"
: "=r"(v0), "+r"(a0)
: "i"(PAL_cserve)
: "$17", "$18", "$19", "$20", "$21");
return v0;
}
static inline void
qemu_set_alarm_rel(unsigned long expire)
{
register unsigned long a0 __asm__("$16") = 5;
register unsigned long a1 __asm__("$17") = expire;
asm volatile("call_pal %2 # cserve set_alarm_rel"
: "+r"(a0), "+r"(a1)
: "i"(PAL_cserve)
: "$0", "$18", "$19", "$20", "$21");
}
static inline void
qemu_set_alarm_abs(unsigned long expire)
{
register unsigned long a0 __asm__("$16") = 6;
register unsigned long a1 __asm__("$17") = expire;
asm volatile("call_pal %2 # cserve set_alarm_abs"
: "+r"(a0), "+r"(a1)
: "i"(PAL_cserve)
: "$0", "$18", "$19", "$20", "$21");
}
static inline unsigned long
qemu_get_vmtime(void)
{
register unsigned long v0 __asm__("$0");
register unsigned long a0 __asm__("$16") = 7;
asm("call_pal %2 # cserve get_time"
: "=r"(v0), "+r"(a0)
: "i"(PAL_cserve)
: "$17", "$18", "$19", "$20", "$21");
return v0;
}
#endif /* !__ASSEMBLY__ */
#endif /* __ALPHA_PAL_H */

11
arch/alpha/include/asm/rtc.h
View File

@ -1,12 +1 @@
#ifndef _ALPHA_RTC_H
#define _ALPHA_RTC_H
#if defined(CONFIG_ALPHA_MARVEL) && defined(CONFIG_SMP) \
|| defined(CONFIG_ALPHA_GENERIC)
# define get_rtc_time alpha_mv.rtc_get_time
# define set_rtc_time alpha_mv.rtc_set_time
#endif
#include <asm-generic/rtc.h>
#endif

24
arch/alpha/include/asm/string.h
View File

@ -22,15 +22,27 @@ extern void * __memcpy(void *, const void *, size_t);
#define __HAVE_ARCH_MEMSET
extern void * __constant_c_memset(void *, unsigned long, size_t);
extern void * ___memset(void *, int, size_t);
extern void * __memset(void *, int, size_t);
extern void * memset(void *, int, size_t);
#define memset(s, c, n) \
(__builtin_constant_p(c) \
? (__builtin_constant_p(n) && (c) == 0 \
? __builtin_memset((s),0,(n)) \
: __constant_c_memset((s),0x0101010101010101UL*(unsigned char)(c),(n))) \
: __memset((s),(c),(n)))
/* For gcc 3.x, we cannot have the inline function named "memset" because
the __builtin_memset will attempt to resolve to the inline as well,
leading to a "sorry" about unimplemented recursive inlining. */
extern inline void *__memset(void *s, int c, size_t n)
{
if (__builtin_constant_p(c)) {
if (__builtin_constant_p(n)) {
return __builtin_memset(s, c, n);
} else {
unsigned long c8 = (c & 0xff) * 0x0101010101010101UL;
return __constant_c_memset(s, c8, n);
}
}
return ___memset(s, c, n);
}
#define memset __memset
#define __HAVE_ARCH_STRCPY
extern char * strcpy(char *,const char *);

2
arch/alpha/include/asm/thread_info.h
View File

@ -58,8 +58,6 @@ register struct thread_info *__current_thread_info __asm__("$8");
#define THREAD_SIZE_ORDER 1
#define THREAD_SIZE (2*PAGE_SIZE)
#define PREEMPT_ACTIVE 0x40000000
/*
* Thread information flags:
* - these are process state flags and used from assembly

1
arch/alpha/include/uapi/asm/pal.h
View File

@ -46,6 +46,7 @@
#define PAL_rdusp 58
#define PAL_whami 60
#define PAL_retsys 61
#define PAL_wtint 62
#define PAL_rti 63

1
arch/alpha/kernel/Makefile
View File

@ -16,6 +16,7 @@ obj-$(CONFIG_PCI) += pci.o pci_iommu.o pci-sysfs.o
obj-$(CONFIG_SRM_ENV) += srm_env.o
obj-$(CONFIG_MODULES) += module.o
obj-$(CONFIG_PERF_EVENTS) += perf_event.o
obj-$(CONFIG_RTC_DRV_ALPHA) += rtc.o
ifdef CONFIG_ALPHA_GENERIC

1
arch/alpha/kernel/alpha_ksyms.c
View File

@ -40,6 +40,7 @@ EXPORT_SYMBOL(strrchr);
EXPORT_SYMBOL(memmove);
EXPORT_SYMBOL(__memcpy);
EXPORT_SYMBOL(__memset);
EXPORT_SYMBOL(___memset);
EXPORT_SYMBOL(__memsetw);
EXPORT_SYMBOL(__constant_c_memset);
EXPORT_SYMBOL(copy_page);

16
arch/alpha/kernel/irq_alpha.c
View File

@ -66,21 +66,7 @@ do_entInt(unsigned long type, unsigned long vector,
break;
case 1:
old_regs = set_irq_regs(regs);
#ifdef CONFIG_SMP
{
long cpu;
smp_percpu_timer_interrupt(regs);
cpu = smp_processor_id();
if (cpu != boot_cpuid) {
kstat_incr_irqs_this_cpu(RTC_IRQ, irq_to_desc(RTC_IRQ));
} else {
handle_irq(RTC_IRQ);
}
}
#else
handle_irq(RTC_IRQ);
#endif
set_irq_regs(old_regs);
return;
case 2:
@ -228,7 +214,7 @@ process_mcheck_info(unsigned long vector, unsigned long la_ptr,
*/
struct irqaction timer_irqaction = {
.handler = timer_interrupt,
.handler = rtc_timer_interrupt,
.name = "timer",
};

5
arch/alpha/kernel/machvec_impl.h
View File

@ -43,10 +43,7 @@
#define CAT1(x,y) x##y
#define CAT(x,y) CAT1(x,y)
#define DO_DEFAULT_RTC \
.rtc_port = 0x70, \
.rtc_get_time = common_get_rtc_time, \
.rtc_set_time = common_set_rtc_time
#define DO_DEFAULT_RTC .rtc_port = 0x70
#define DO_EV4_MMU \
.max_asn = EV4_MAX_ASN, \

15
arch/alpha/kernel/perf_event.c
View File

@ -83,6 +83,8 @@ struct alpha_pmu_t {
long pmc_left[3];
/* Subroutine for allocation of PMCs. Enforces constraints. */
int (*check_constraints)(struct perf_event **, unsigned long *, int);
/* Subroutine for checking validity of a raw event for this PMU. */
int (*raw_event_valid)(u64 config);
};
/*
@ -203,6 +205,12 @@ success:
}
static int ev67_raw_event_valid(u64 config)
{
return config >= EV67_CYCLES && config < EV67_LAST_ET;
};
static const struct alpha_pmu_t ev67_pmu = {
.event_map = ev67_perfmon_event_map,
.max_events = ARRAY_SIZE(ev67_perfmon_event_map),
@ -211,7 +219,8 @@ static const struct alpha_pmu_t ev67_pmu = {
.pmc_count_mask = {EV67_PCTR_0_COUNT_MASK, EV67_PCTR_1_COUNT_MASK, 0},
.pmc_max_period = {(1UL<<20) - 1, (1UL<<20) - 1, 0},
.pmc_left = {16, 4, 0},
.check_constraints = ev67_check_constraints
.check_constraints = ev67_check_constraints,
.raw_event_valid = ev67_raw_event_valid,
};
@ -609,7 +618,9 @@ static int __hw_perf_event_init(struct perf_event *event)
} else if (attr->type == PERF_TYPE_HW_CACHE) {
return -EOPNOTSUPP;
} else if (attr->type == PERF_TYPE_RAW) {
ev = attr->config & 0xff;
if (!alpha_pmu->raw_event_valid(attr->config))
return -EINVAL;
ev = attr->config;
} else {
return -EOPNOTSUPP;
}

17
arch/alpha/kernel/process.c
View File

@ -46,6 +46,23 @@
void (*pm_power_off)(void) = machine_power_off;
EXPORT_SYMBOL(pm_power_off);
#ifdef CONFIG_ALPHA_WTINT
/*
* Sleep the CPU.
* EV6, LCA45 and QEMU know how to power down, skipping N timer interrupts.
*/
void arch_cpu_idle(void)
{
wtint(0);
local_irq_enable();
}
void arch_cpu_idle_dead(void)
{
wtint(INT_MAX);
}
#endif /* ALPHA_WTINT */
struct halt_info {
int mode;
char *restart_cmd;

6
arch/alpha/kernel/proto.h
View File

@ -135,17 +135,15 @@ extern void unregister_srm_console(void);
/* smp.c */
extern void setup_smp(void);
extern void handle_ipi(struct pt_regs *);
extern void smp_percpu_timer_interrupt(struct pt_regs *);
/* bios32.c */
/* extern void reset_for_srm(void); */
/* time.c */
extern irqreturn_t timer_interrupt(int irq, void *dev);
extern irqreturn_t rtc_timer_interrupt(int irq, void *dev);
extern void init_clockevent(void);
extern void common_init_rtc(void);
extern unsigned long est_cycle_freq;
extern unsigned int common_get_rtc_time(struct rtc_time *time);
extern int common_set_rtc_time(struct rtc_time *time);
/* smc37c93x.c */
extern void SMC93x_Init(void);

323
arch/alpha/kernel/rtc.c Normal file
View File

@ -0,0 +1,323 @@
/*
* linux/arch/alpha/kernel/rtc.c
*
* Copyright (C) 1991, 1992, 1995, 1999, 2000 Linus Torvalds
*
* This file contains date handling.
*/
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/param.h>
#include <linux/string.h>
#include <linux/mc146818rtc.h>
#include <linux/bcd.h>
#include <linux/rtc.h>
#include <linux/platform_device.h>
#include <asm/rtc.h>
#include "proto.h"
/*
* Support for the RTC device.
*
* We don't want to use the rtc-cmos driver, because we don't want to support
* alarms, as that would be indistinguishable from timer interrupts.
*
* Further, generic code is really, really tied to a 1900 epoch. This is
* true in __get_rtc_time as well as the users of struct rtc_time e.g.
* rtc_tm_to_time. Thankfully all of the other epochs in use are later
* than 1900, and so it's easy to adjust.
*/
static unsigned long rtc_epoch;
static int __init
specifiy_epoch(char *str)
{
unsigned long epoch = simple_strtoul(str, NULL, 0);
if (epoch < 1900)
printk("Ignoring invalid user specified epoch %lu\n", epoch);
else
rtc_epoch = epoch;
return 1;
}
__setup("epoch=", specifiy_epoch);
static void __init
init_rtc_epoch(void)
{
int epoch, year, ctrl;
if (rtc_epoch != 0) {
/* The epoch was specified on the command-line. */
return;
}
/* Detect the epoch in use on this computer. */
ctrl = CMOS_READ(RTC_CONTROL);
year = CMOS_READ(RTC_YEAR);
if (!(ctrl & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
year = bcd2bin(year);
/* PC-like is standard; used for year >= 70 */
epoch = 1900;
if (year < 20) {
epoch = 2000;
} else if (year >= 20 && year < 48) {
/* NT epoch */
epoch = 1980;
} else if (year >= 48 && year < 70) {
/* Digital UNIX epoch */
epoch = 1952;
}
rtc_epoch = epoch;
printk(KERN_INFO "Using epoch %d for rtc year %d\n", epoch, year);
}
static int
alpha_rtc_read_time(struct device *dev, struct rtc_time *tm)
{
__get_rtc_time(tm);
/* Adjust for non-default epochs. It's easier to depend on the
generic __get_rtc_time and adjust the epoch here than create
a copy of __get_rtc_time with the edits we need. */
if (rtc_epoch != 1900) {
int year = tm->tm_year;
/* Undo the century adjustment made in __get_rtc_time. */
if (year >= 100)
year -= 100;
year += rtc_epoch - 1900;
/* Redo the century adjustment with the epoch in place. */
if (year <= 69)
year += 100;
tm->tm_year = year;
}
return rtc_valid_tm(tm);
}
static int
alpha_rtc_set_time(struct device *dev, struct rtc_time *tm)
{
struct rtc_time xtm;
if (rtc_epoch != 1900) {
xtm = *tm;
xtm.tm_year -= rtc_epoch - 1900;
tm = &xtm;
}
return __set_rtc_time(tm);
}
static int
alpha_rtc_set_mmss(struct device *dev, unsigned long nowtime)
{
int retval = 0;
int real_seconds, real_minutes, cmos_minutes;
unsigned char save_control, save_freq_select;
/* Note: This code only updates minutes and seconds. Comments
indicate this was to avoid messing with unknown time zones,
and with the epoch nonsense described above. In order for
this to work, the existing clock cannot be off by more than
15 minutes.
??? This choice is may be out of date. The x86 port does
not have problems with timezones, and the epoch processing has
now been fixed in alpha_set_rtc_time.
In either case, one can always force a full rtc update with
the userland hwclock program, so surely 15 minute accuracy
is no real burden. */
/* In order to set the CMOS clock precisely, we have to be called
500 ms after the second nowtime has started, because when
nowtime is written into the registers of the CMOS clock, it will
jump to the next second precisely 500 ms later. Check the Motorola
MC146818A or Dallas DS12887 data sheet for details. */
/* irq are locally disabled here */
spin_lock(&rtc_lock);
/* Tell the clock it's being set */
save_control = CMOS_READ(RTC_CONTROL);
CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL);
/* Stop and reset prescaler */
save_freq_select = CMOS_READ(RTC_FREQ_SELECT);
CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
cmos_minutes = CMOS_READ(RTC_MINUTES);
if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
cmos_minutes = bcd2bin(cmos_minutes);
real_seconds = nowtime % 60;
real_minutes = nowtime / 60;
if (((abs(real_minutes - cmos_minutes) + 15) / 30) & 1) {
/* correct for half hour time zone */
real_minutes += 30;
}
real_minutes %= 60;
if (abs(real_minutes - cmos_minutes) < 30) {
if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
real_seconds = bin2bcd(real_seconds);
real_minutes = bin2bcd(real_minutes);
}
CMOS_WRITE(real_seconds,RTC_SECONDS);
CMOS_WRITE(real_minutes,RTC_MINUTES);
} else {
printk_once(KERN_NOTICE
"set_rtc_mmss: can't update from %d to %d\n",
cmos_minutes, real_minutes);
retval = -1;
}
/* The following flags have to be released exactly in this order,
* otherwise the DS12887 (popular MC146818A clone with integrated
* battery and quartz) will not reset the oscillator and will not
* update precisely 500 ms later. You won't find this mentioned in
* the Dallas Semiconductor data sheets, but who believes data
* sheets anyway ... -- Markus Kuhn
*/
CMOS_WRITE(save_control, RTC_CONTROL);
CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
spin_unlock(&rtc_lock);
return retval;
}
static int
alpha_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
{
switch (cmd) {
case RTC_EPOCH_READ:
return put_user(rtc_epoch, (unsigned long __user *)arg);
case RTC_EPOCH_SET:
if (arg < 1900)
return -EINVAL;
rtc_epoch = arg;
return 0;
default:
return -ENOIOCTLCMD;
}
}
static const struct rtc_class_ops alpha_rtc_ops = {
.read_time = alpha_rtc_read_time,
.set_time = alpha_rtc_set_time,
.set_mmss = alpha_rtc_set_mmss,
.ioctl = alpha_rtc_ioctl,
};
/*
* Similarly, except do the actual CMOS access on the boot cpu only.
* This requires marshalling the data across an interprocessor call.
*/
#if defined(CONFIG_SMP) && \
(defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_MARVEL))
# define HAVE_REMOTE_RTC 1
union remote_data {
struct rtc_time *tm;
unsigned long now;
long retval;
};
static void
do_remote_read(void *data)
{
union remote_data *x = data;
x->retval = alpha_rtc_read_time(NULL, x->tm);
}
static int
remote_read_time(struct device *dev, struct rtc_time *tm)
{
union remote_data x;
if (smp_processor_id() != boot_cpuid) {
x.tm = tm;
smp_call_function_single(boot_cpuid, do_remote_read, &x, 1);
return x.retval;
}
return alpha_rtc_read_time(NULL, tm);
}
static void
do_remote_set(void *data)
{
union remote_data *x = data;
x->retval = alpha_rtc_set_time(NULL, x->tm);
}
static int
remote_set_time(struct device *dev, struct rtc_time *tm)
{
union remote_data x;
if (smp_processor_id() != boot_cpuid) {
x.tm = tm;
smp_call_function_single(boot_cpuid, do_remote_set, &x, 1);
return x.retval;
}
return alpha_rtc_set_time(NULL, tm);
}
static void
do_remote_mmss(void *data)
{
union remote_data *x = data;
x->retval = alpha_rtc_set_mmss(NULL, x->now);
}
static int
remote_set_mmss(struct device *dev, unsigned long now)
{
union remote_data x;
if (smp_processor_id() != boot_cpuid) {
x.now = now;
smp_call_function_single(boot_cpuid, do_remote_mmss, &x, 1);
return x.retval;
}
return alpha_rtc_set_mmss(NULL, now);
}
static const struct rtc_class_ops remote_rtc_ops = {
.read_time = remote_read_time,
.set_time = remote_set_time,
.set_mmss = remote_set_mmss,
.ioctl = alpha_rtc_ioctl,
};
#endif
static int __init
alpha_rtc_init(void)
{
const struct rtc_class_ops *ops;
struct platform_device *pdev;
struct rtc_device *rtc;
const char *name;
init_rtc_epoch();
name = "rtc-alpha";
ops = &alpha_rtc_ops;
#ifdef HAVE_REMOTE_RTC
if (alpha_mv.rtc_boot_cpu_only)
ops = &remote_rtc_ops;
#endif
pdev = platform_device_register_simple(name, -1, NULL, 0);
rtc = devm_rtc_device_register(&pdev->dev, name, ops, THIS_MODULE);
if (IS_ERR(rtc))
return PTR_ERR(rtc);
platform_set_drvdata(pdev, rtc);
return 0;
}
device_initcall(alpha_rtc_init);

23
arch/alpha/kernel/setup.c
View File

@ -115,10 +115,17 @@ unsigned long alpha_agpgart_size = DEFAULT_AGP_APER_SIZE;
#ifdef CONFIG_ALPHA_GENERIC
struct alpha_machine_vector alpha_mv;
#endif
#ifndef alpha_using_srm
int alpha_using_srm;
EXPORT_SYMBOL(alpha_using_srm);
#endif
#ifndef alpha_using_qemu
int alpha_using_qemu;
#endif
static struct alpha_machine_vector *get_sysvec(unsigned long, unsigned long,
unsigned long);
static struct alpha_machine_vector *get_sysvec_byname(const char *);
@ -529,11 +536,15 @@ setup_arch(char **cmdline_p)
atomic_notifier_chain_register(&panic_notifier_list,
&alpha_panic_block);
#ifdef CONFIG_ALPHA_GENERIC
#ifndef alpha_using_srm
/* Assume that we've booted from SRM if we haven't booted from MILO.
Detect the later by looking for "MILO" in the system serial nr. */
alpha_using_srm = strncmp((const char *)hwrpb->ssn, "MILO", 4) != 0;
#endif
#ifndef alpha_using_qemu
/* Similarly, look for QEMU. */
alpha_using_qemu = strstr((const char *)hwrpb->ssn, "QEMU") != 0;
#endif
/* If we are using SRM, we want to allow callbacks
as early as possible, so do this NOW, and then
@ -1207,6 +1218,7 @@ show_cpuinfo(struct seq_file *f, void *slot)
char *systype_name;
char *sysvariation_name;
int nr_processors;
unsigned long timer_freq;
cpu_index = (unsigned) (cpu->type - 1);
cpu_name = "Unknown";
@ -1218,6 +1230,12 @@ show_cpuinfo(struct seq_file *f, void *slot)
nr_processors = get_nr_processors(cpu, hwrpb->nr_processors);
#if CONFIG_HZ == 1024 || CONFIG_HZ == 1200
timer_freq = (100UL * hwrpb->intr_freq) / 4096;
#else
timer_freq = 100UL * CONFIG_HZ;
#endif
seq_printf(f, "cpu\t\t\t: Alpha\n"
"cpu model\t\t: %s\n"
"cpu variation\t\t: %ld\n"
@ -1243,8 +1261,7 @@ show_cpuinfo(struct seq_file *f, void *slot)
(char*)hwrpb->ssn,
est_cycle_freq ? : hwrpb->cycle_freq,
est_cycle_freq ? "est." : "",
hwrpb->intr_freq / 4096,
(100 * hwrpb->intr_freq / 4096) % 100,
timer_freq / 100, timer_freq % 100,
hwrpb->pagesize,
hwrpb->pa_bits,
hwrpb->max_asn,

33
arch/alpha/kernel/smp.c
View File

@ -138,9 +138,11 @@ smp_callin(void)
/* Get our local ticker going. */
smp_setup_percpu_timer(cpuid);
init_clockevent();
/* Call platform-specific callin, if specified */
if (alpha_mv.smp_callin) alpha_mv.smp_callin();
if (alpha_mv.smp_callin)
alpha_mv.smp_callin();
/* All kernel threads share the same mm context. */
atomic_inc(&init_mm.mm_count);
@ -498,35 +500,6 @@ smp_cpus_done(unsigned int max_cpus)
((bogosum + 2500) / (5000/HZ)) % 100);
}
void
smp_percpu_timer_interrupt(struct pt_regs *regs)
{
struct pt_regs *old_regs;
int cpu = smp_processor_id();
unsigned long user = user_mode(regs);
struct cpuinfo_alpha *data = &cpu_data[cpu];
old_regs = set_irq_regs(regs);
/* Record kernel PC. */
profile_tick(CPU_PROFILING);
if (!--data->prof_counter) {
/* We need to make like a normal interrupt -- otherwise
timer interrupts ignore the global interrupt lock,
which would be a Bad Thing. */
irq_enter();
update_process_times(user);
data->prof_counter = data->prof_multiplier;
irq_exit();
}
set_irq_regs(old_regs);
}
int
setup_profiling_timer(unsigned int multiplier)
{

2
arch/alpha/kernel/sys_jensen.c
View File

@ -224,8 +224,6 @@ struct alpha_machine_vector jensen_mv __initmv = {
.machine_check = jensen_machine_check,
.max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
.rtc_port = 0x170,
.rtc_get_time = common_get_rtc_time,
.rtc_set_time = common_set_rtc_time,
.nr_irqs = 16,
.device_interrupt = jensen_device_interrupt,

55
arch/alpha/kernel/sys_marvel.c
View File

@ -22,7 +22,6 @@
#include <asm/hwrpb.h>
#include <asm/tlbflush.h>
#include <asm/vga.h>
#include <asm/rtc.h>
#include "proto.h"
#include "err_impl.h"
@ -400,57 +399,6 @@ marvel_init_rtc(void)
init_rtc_irq();
}
struct marvel_rtc_time {
struct rtc_time *time;
int retval;
};
#ifdef CONFIG_SMP
static void
smp_get_rtc_time(void *data)
{
struct marvel_rtc_time *mrt = data;
mrt->retval = __get_rtc_time(mrt->time);
}
static void
smp_set_rtc_time(void *data)
{
struct marvel_rtc_time *mrt = data;
mrt->retval = __set_rtc_time(mrt->time);
}
#endif
static unsigned int
marvel_get_rtc_time(struct rtc_time *time)
{
#ifdef CONFIG_SMP
struct marvel_rtc_time mrt;
if (smp_processor_id() != boot_cpuid) {
mrt.time = time;
smp_call_function_single(boot_cpuid, smp_get_rtc_time, &mrt, 1);
return mrt.retval;
}
#endif
return __get_rtc_time(time);
}
static int
marvel_set_rtc_time(struct rtc_time *time)
{
#ifdef CONFIG_SMP
struct marvel_rtc_time mrt;
if (smp_processor_id() != boot_cpuid) {
mrt.time = time;
smp_call_function_single(boot_cpuid, smp_set_rtc_time, &mrt, 1);
return mrt.retval;
}
#endif
return __set_rtc_time(time);
}
static void
marvel_smp_callin(void)
{
@ -492,8 +440,7 @@ struct alpha_machine_vector marvel_ev7_mv __initmv = {
.vector_name = "MARVEL/EV7",
DO_EV7_MMU,
.rtc_port = 0x70,
.rtc_get_time = marvel_get_rtc_time,
.rtc_set_time = marvel_set_rtc_time,
.rtc_boot_cpu_only = 1,
DO_MARVEL_IO,
.machine_check = marvel_machine_check,
.max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,

421
arch/alpha/kernel/time.c
View File

@ -3,13 +3,7 @@
*
* Copyright (C) 1991, 1992, 1995, 1999, 2000 Linus Torvalds
*
* This file contains the PC-specific time handling details:
* reading the RTC at bootup, etc..
* 1994-07-02 Alan Modra
* fixed set_rtc_mmss, fixed time.year for >= 2000, new mktime
* 1995-03-26 Markus Kuhn
* fixed 500 ms bug at call to set_rtc_mmss, fixed DS12887
* precision CMOS clock update
* This file contains the clocksource time handling.
* 1997-09-10 Updated NTP code according to technical memorandum Jan '96
* "A Kernel Model for Precision Timekeeping" by Dave Mills
* 1997-01-09 Adrian Sun
@ -21,9 +15,6 @@
* 1999-04-16 Thorsten Kranzkowski (dl8bcu@gmx.net)
* fixed algorithm in do_gettimeofday() for calculating the precise time
* from processor cycle counter (now taking lost_ticks into account)
* 2000-08-13 Jan-Benedict Glaw <jbglaw@lug-owl.de>
* Fixed time_init to be aware of epoches != 1900. This prevents
* booting up in 2048 for me;) Code is stolen from rtc.c.
* 2003-06-03 R. Scott Bailey <scott.bailey@eds.com>
* Tighten sanity in time_init from 1% (10,000 PPM) to 250 PPM
*/
@ -46,40 +37,19 @@
#include <asm/uaccess.h>
#include <asm/io.h>
#include <asm/hwrpb.h>
#include <asm/rtc.h>
#include <linux/mc146818rtc.h>
#include <linux/time.h>
#include <linux/timex.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
#include "proto.h"
#include "irq_impl.h"
static int set_rtc_mmss(unsigned long);
DEFINE_SPINLOCK(rtc_lock);
EXPORT_SYMBOL(rtc_lock);
#define TICK_SIZE (tick_nsec / 1000)
/*
* Shift amount by which scaled_ticks_per_cycle is scaled. Shifting
* by 48 gives us 16 bits for HZ while keeping the accuracy good even
* for large CPU clock rates.
*/
#define FIX_SHIFT 48
/* lump static variables together for more efficient access: */
static struct {
/* cycle counter last time it got invoked */
__u32 last_time;
/* ticks/cycle * 2^48 */
unsigned long scaled_ticks_per_cycle;
/* partial unused tick */
unsigned long partial_tick;
} state;
unsigned long est_cycle_freq;
#ifdef CONFIG_IRQ_WORK
@ -108,109 +78,156 @@ static inline __u32 rpcc(void)
return __builtin_alpha_rpcc();
}
int update_persistent_clock(struct timespec now)
{
return set_rtc_mmss(now.tv_sec);
}
void read_persistent_clock(struct timespec *ts)
{
unsigned int year, mon, day, hour, min, sec, epoch;
sec = CMOS_READ(RTC_SECONDS);
min = CMOS_READ(RTC_MINUTES);
hour = CMOS_READ(RTC_HOURS);
day = CMOS_READ(RTC_DAY_OF_MONTH);
mon = CMOS_READ(RTC_MONTH);
year = CMOS_READ(RTC_YEAR);
if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
sec = bcd2bin(sec);
min = bcd2bin(min);
hour = bcd2bin(hour);
day = bcd2bin(day);
mon = bcd2bin(mon);
year = bcd2bin(year);
}
/* PC-like is standard; used for year >= 70 */
epoch = 1900;
if (year < 20)
epoch = 2000;
else if (year >= 20 && year < 48)
/* NT epoch */
epoch = 1980;
else if (year >= 48 && year < 70)
/* Digital UNIX epoch */
epoch = 1952;
printk(KERN_INFO "Using epoch = %d\n", epoch);
if ((year += epoch) < 1970)
year += 100;
ts->tv_sec = mktime(year, mon, day, hour, min, sec);
ts->tv_nsec = 0;
}
/*
* timer_interrupt() needs to keep up the real-time clock,
* as well as call the "xtime_update()" routine every clocktick
* The RTC as a clock_event_device primitive.
*/
irqreturn_t timer_interrupt(int irq, void *dev)
static DEFINE_PER_CPU(struct clock_event_device, cpu_ce);
irqreturn_t
rtc_timer_interrupt(int irq, void *dev)
{
unsigned long delta;
__u32 now;
long nticks;
int cpu = smp_processor_id();
struct clock_event_device *ce = &per_cpu(cpu_ce, cpu);
#ifndef CONFIG_SMP
/* Not SMP, do kernel PC profiling here. */
profile_tick(CPU_PROFILING);
#endif
/*
* Calculate how many ticks have passed since the last update,
* including any previous partial leftover. Save any resulting
* fraction for the next pass.
*/
now = rpcc();
delta = now - state.last_time;
state.last_time = now;
delta = delta * state.scaled_ticks_per_cycle + state.partial_tick;
state.partial_tick = delta & ((1UL << FIX_SHIFT) - 1);
nticks = delta >> FIX_SHIFT;
if (nticks)
xtime_update(nticks);
/* Don't run the hook for UNUSED or SHUTDOWN. */
if (likely(ce->mode == CLOCK_EVT_MODE_PERIODIC))
ce->event_handler(ce);
if (test_irq_work_pending()) {
clear_irq_work_pending();
irq_work_run();
}
#ifndef CONFIG_SMP
while (nticks--)
update_process_times(user_mode(get_irq_regs()));
#endif
return IRQ_HANDLED;
}
static void
rtc_ce_set_mode(enum clock_event_mode mode, struct clock_event_device *ce)
{
/* The mode member of CE is updated in generic code.
Since we only support periodic events, nothing to do. */
}
static int
rtc_ce_set_next_event(unsigned long evt, struct clock_event_device *ce)
{
/* This hook is for oneshot mode, which we don't support. */
return -EINVAL;
}
static void __init
init_rtc_clockevent(void)
{
int cpu = smp_processor_id();
struct clock_event_device *ce = &per_cpu(cpu_ce, cpu);
*ce = (struct clock_event_device){
.name = "rtc",
.features = CLOCK_EVT_FEAT_PERIODIC,
.rating = 100,
.cpumask = cpumask_of(cpu),
.set_mode = rtc_ce_set_mode,
.set_next_event = rtc_ce_set_next_event,
};
clockevents_config_and_register(ce, CONFIG_HZ, 0, 0);
}
/*
* The QEMU clock as a clocksource primitive.
*/
static cycle_t
qemu_cs_read(struct clocksource *cs)
{
return qemu_get_vmtime();
}
static struct clocksource qemu_cs = {
.name = "qemu",
.rating = 400,
.read = qemu_cs_read,
.mask = CLOCKSOURCE_MASK(64),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
.max_idle_ns = LONG_MAX
};
/*
* The QEMU alarm as a clock_event_device primitive.
*/
static void
qemu_ce_set_mode(enum clock_event_mode mode, struct clock_event_device *ce)
{
/* The mode member of CE is updated for us in generic code.
Just make sure that the event is disabled. */
qemu_set_alarm_abs(0);
}
static int
qemu_ce_set_next_event(unsigned long evt, struct clock_event_device *ce)
{
qemu_set_alarm_rel(evt);
return 0;
}
static irqreturn_t
qemu_timer_interrupt(int irq, void *dev)
{
int cpu = smp_processor_id();
struct clock_event_device *ce = &per_cpu(cpu_ce, cpu);
ce->event_handler(ce);
return IRQ_HANDLED;
}
static void __init
init_qemu_clockevent(void)
{
int cpu = smp_processor_id();
struct clock_event_device *ce = &per_cpu(cpu_ce, cpu);
*ce = (struct clock_event_device){
.name = "qemu",
.features = CLOCK_EVT_FEAT_ONESHOT,
.rating = 400,
.cpumask = cpumask_of(cpu),
.set_mode = qemu_ce_set_mode,
.set_next_event = qemu_ce_set_next_event,
};
clockevents_config_and_register(ce, NSEC_PER_SEC, 1000, LONG_MAX);
}
void __init
common_init_rtc(void)
{
unsigned char x;
unsigned char x, sel = 0;
/* Reset periodic interrupt frequency. */
x = CMOS_READ(RTC_FREQ_SELECT) & 0x3f;
/* Test includes known working values on various platforms
where 0x26 is wrong; we refuse to change those. */
if (x != 0x26 && x != 0x25 && x != 0x19 && x != 0x06) {
printk("Setting RTC_FREQ to 1024 Hz (%x)\n", x);
CMOS_WRITE(0x26, RTC_FREQ_SELECT);
#if CONFIG_HZ == 1024 || CONFIG_HZ == 1200
x = CMOS_READ(RTC_FREQ_SELECT) & 0x3f;
/* Test includes known working values on various platforms
where 0x26 is wrong; we refuse to change those. */
if (x != 0x26 && x != 0x25 && x != 0x19 && x != 0x06) {
sel = RTC_REF_CLCK_32KHZ + 6;
}
#elif CONFIG_HZ == 256 || CONFIG_HZ == 128 || CONFIG_HZ == 64 || CONFIG_HZ == 32
sel = RTC_REF_CLCK_32KHZ + __builtin_ffs(32768 / CONFIG_HZ);
#else
# error "Unknown HZ from arch/alpha/Kconfig"
#endif
if (sel) {
printk(KERN_INFO "Setting RTC_FREQ to %d Hz (%x)\n",
CONFIG_HZ, sel);
CMOS_WRITE(sel, RTC_FREQ_SELECT);
}
/* Turn on periodic interrupts. */
x = CMOS_READ(RTC_CONTROL);
@ -233,16 +250,37 @@ common_init_rtc(void)
init_rtc_irq();
}
unsigned int common_get_rtc_time(struct rtc_time *time)
#ifndef CONFIG_ALPHA_WTINT
/*
* The RPCC as a clocksource primitive.
*
* While we have free-running timecounters running on all CPUs, and we make
* a half-hearted attempt in init_rtc_rpcc_info to sync the timecounter
* with the wall clock, that initialization isn't kept up-to-date across
* different time counters in SMP mode. Therefore we can only use this
* method when there's only one CPU enabled.
*
* When using the WTINT PALcall, the RPCC may shift to a lower frequency,
* or stop altogether, while waiting for the interrupt. Therefore we cannot
* use this method when WTINT is in use.
*/
static cycle_t read_rpcc(struct clocksource *cs)
{
return __get_rtc_time(time);
return rpcc();
}
int common_set_rtc_time(struct rtc_time *time)
{
return __set_rtc_time(time);
}
static struct clocksource clocksource_rpcc = {
.name = "rpcc",
.rating = 300,
.read = read_rpcc,
.mask = CLOCKSOURCE_MASK(32),
.flags = CLOCK_SOURCE_IS_CONTINUOUS
};
#endif /* ALPHA_WTINT */
/* Validate a computed cycle counter result against the known bounds for
the given processor core. There's too much brokenness in the way of
timing hardware for any one method to work everywhere. :-(
@ -353,33 +391,6 @@ rpcc_after_update_in_progress(void)
return rpcc();
}
#ifndef CONFIG_SMP
/* Until and unless we figure out how to get cpu cycle counters
in sync and keep them there, we can't use the rpcc. */
static cycle_t read_rpcc(struct clocksource *cs)
{
cycle_t ret = (cycle_t)rpcc();
return ret;
}
static struct clocksource clocksource_rpcc = {
.name = "rpcc",
.rating = 300,
.read = read_rpcc,
.mask = CLOCKSOURCE_MASK(32),
.flags = CLOCK_SOURCE_IS_CONTINUOUS
};
static inline void register_rpcc_clocksource(long cycle_freq)
{
clocksource_register_hz(&clocksource_rpcc, cycle_freq);
}
#else /* !CONFIG_SMP */
static inline void register_rpcc_clocksource(long cycle_freq)
{
}
#endif /* !CONFIG_SMP */
void __init
time_init(void)
{
@ -387,6 +398,15 @@ time_init(void)
unsigned long cycle_freq, tolerance;
long diff;
if (alpha_using_qemu) {
clocksource_register_hz(&qemu_cs, NSEC_PER_SEC);
init_qemu_clockevent();
timer_irqaction.handler = qemu_timer_interrupt;
init_rtc_irq();
return;
}
/* Calibrate CPU clock -- attempt #1. */
if (!est_cycle_freq)
est_cycle_freq = validate_cc_value(calibrate_cc_with_pit());
@ -421,100 +441,25 @@ time_init(void)
"and unable to estimate a proper value!\n");
}
/* From John Bowman <bowman@math.ualberta.ca>: allow the values
to settle, as the Update-In-Progress bit going low isn't good
enough on some hardware. 2ms is our guess; we haven't found
bogomips yet, but this is close on a 500Mhz box. */
__delay(1000000);
if (HZ > (1<<16)) {
extern void __you_loose (void);
__you_loose();
}
register_rpcc_clocksource(cycle_freq);
state.last_time = cc1;
state.scaled_ticks_per_cycle
= ((unsigned long) HZ << FIX_SHIFT) / cycle_freq;
state.partial_tick = 0L;
/* See above for restrictions on using clocksource_rpcc. */
#ifndef CONFIG_ALPHA_WTINT
if (hwrpb->nr_processors == 1)
clocksource_register_hz(&clocksource_rpcc, cycle_freq);
#endif
/* Startup the timer source. */
alpha_mv.init_rtc();
init_rtc_clockevent();
}
/*
* In order to set the CMOS clock precisely, set_rtc_mmss has to be
* called 500 ms after the second nowtime has started, because when
* nowtime is written into the registers of the CMOS clock, it will
* jump to the next second precisely 500 ms later. Check the Motorola
* MC146818A or Dallas DS12887 data sheet for details.
*
* BUG: This routine does not handle hour overflow properly; it just
* sets the minutes. Usually you won't notice until after reboot!
*/
static int
set_rtc_mmss(unsigned long nowtime)
/* Initialize the clock_event_device for secondary cpus. */
#ifdef CONFIG_SMP
void __init
init_clockevent(void)
{
int retval = 0;
int real_seconds, real_minutes, cmos_minutes;
unsigned char save_control, save_freq_select;
/* irq are locally disabled here */
spin_lock(&rtc_lock);
/* Tell the clock it's being set */
save_control = CMOS_READ(RTC_CONTROL);
CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL);
/* Stop and reset prescaler */
save_freq_select = CMOS_READ(RTC_FREQ_SELECT);
CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
cmos_minutes = CMOS_READ(RTC_MINUTES);
if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
cmos_minutes = bcd2bin(cmos_minutes);
/*
* since we're only adjusting minutes and seconds,
* don't interfere with hour overflow. This avoids
* messing with unknown time zones but requires your
* RTC not to be off by more than 15 minutes
*/
real_seconds = nowtime % 60;
real_minutes = nowtime / 60;
if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1) {
/* correct for half hour time zone */
real_minutes += 30;
}
real_minutes %= 60;
if (abs(real_minutes - cmos_minutes) < 30) {
if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
real_seconds = bin2bcd(real_seconds);
real_minutes = bin2bcd(real_minutes);
}
CMOS_WRITE(real_seconds,RTC_SECONDS);
CMOS_WRITE(real_minutes,RTC_MINUTES);
} else {
printk_once(KERN_NOTICE
"set_rtc_mmss: can't update from %d to %d\n",
cmos_minutes, real_minutes);
retval = -1;
}
/* The following flags have to be released exactly in this order,
* otherwise the DS12887 (popular MC146818A clone with integrated
* battery and quartz) will not reset the oscillator and will not
* update precisely 500 ms later. You won't find this mentioned in
* the Dallas Semiconductor data sheets, but who believes data
* sheets anyway ... -- Markus Kuhn
*/
CMOS_WRITE(save_control, RTC_CONTROL);
CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
spin_unlock(&rtc_lock);
return retval;
if (alpha_using_qemu)
init_qemu_clockevent();
else
init_rtc_clockevent();
}
#endif

15
arch/alpha/kernel/traps.c
View File

@ -241,6 +241,21 @@ do_entIF(unsigned long type, struct pt_regs *regs)
(const char *)(data[1] | (long)data[2] << 32),
data[0]);
}
#ifdef CONFIG_ALPHA_WTINT
if (type == 4) {
/* If CALL_PAL WTINT is totally unsupported by the
PALcode, e.g. MILO, "emulate" it by overwriting
the insn. */
unsigned int *pinsn
= (unsigned int *) regs->pc - 1;
if (*pinsn == PAL_wtint) {
*pinsn = 0x47e01400; /* mov 0,$0 */
imb();
regs->r0 = 0;
return;
}
}
#endif /* ALPHA_WTINT */
die_if_kernel((type == 1 ? "Kernel Bug" : "Instruction fault"),
regs, type, NULL);
}

10
arch/alpha/lib/csum_partial_copy.c
View File

@ -130,7 +130,7 @@ csum_partial_cfu_aligned(const unsigned long __user *src, unsigned long *dst,
*dst = word | tmp;
checksum += carry;
}
if (err) *errp = err;
if (err && errp) *errp = err;
return checksum;
}
@ -185,7 +185,7 @@ csum_partial_cfu_dest_aligned(const unsigned long __user *src,
*dst = word | tmp;
checksum += carry;
}
if (err) *errp = err;
if (err && errp) *errp = err;
return checksum;
}
@ -242,7 +242,7 @@ csum_partial_cfu_src_aligned(const unsigned long __user *src,
stq_u(partial_dest | second_dest, dst);
out:
checksum += carry;
if (err) *errp = err;
if (err && errp) *errp = err;
return checksum;
}
@ -325,7 +325,7 @@ csum_partial_cfu_unaligned(const unsigned long __user * src,
stq_u(partial_dest | word | second_dest, dst);
checksum += carry;
}
if (err) *errp = err;
if (err && errp) *errp = err;
return checksum;
}
@ -339,7 +339,7 @@ csum_partial_copy_from_user(const void __user *src, void *dst, int len,
if (len) {
if (!access_ok(VERIFY_READ, src, len)) {
*errp = -EFAULT;
if (errp) *errp = -EFAULT;
memset(dst, 0, len);
return sum;
}

12
arch/alpha/lib/ev6-memset.S
View File

@ -30,14 +30,15 @@
.set noat
.set noreorder
.text
.globl memset
.globl __memset
.globl ___memset
.globl __memsetw
.globl __constant_c_memset
.globl memset
.ent __memset
.ent ___memset
.align 5
__memset:
___memset:
.frame $30,0,$26,0
.prologue 0
@ -227,7 +228,7 @@ end_b:
nop
nop
ret $31,($26),1 # L0 :
.end __memset
.end ___memset
/*
* This is the original body of code, prior to replication and
@ -594,4 +595,5 @@ end_w:
.end __memsetw
memset = __memset
memset = ___memset
__memset = ___memset

11
arch/alpha/lib/memset.S
View File

@ -19,11 +19,13 @@
.text
.globl memset
.globl __memset
.globl ___memset
.globl __memsetw
.globl __constant_c_memset
.ent __memset
.ent ___memset
.align 5
__memset:
___memset:
.frame $30,0,$26,0
.prologue 0
@ -103,7 +105,7 @@ within_one_quad:
end:
ret $31,($26),1 /* E1 */
.end __memset
.end ___memset
.align 5
.ent __memsetw
@ -121,4 +123,5 @@ __memsetw:
.end __memsetw
memset = __memset
memset = ___memset
__memset = ___memset

172
arch/arc/boot/dts/abilis_tb100.dtsi
View File

@ -43,124 +43,124 @@
iomux: iomux@FF10601c {
/* Port 1 */
pctl_tsin_s0: pctl-tsin-s0 { /* Serial TS-in 0 */
pingrp = "mis0_pins";
abilis,function = "mis0";
};
pctl_tsin_s1: pctl-tsin-s1 { /* Serial TS-in 1 */
pingrp = "mis1_pins";
abilis,function = "mis1";
};
pctl_gpio_a: pctl-gpio-a { /* GPIO bank A */
pingrp = "gpioa_pins";
abilis,function = "gpioa";
};
pctl_tsin_p1: pctl-tsin-p1 { /* Parallel TS-in 1 */
pingrp = "mip1_pins";
abilis,function = "mip1";
};
/* Port 2 */
pctl_tsin_s2: pctl-tsin-s2 { /* Serial TS-in 2 */
pingrp = "mis2_pins";
abilis,function = "mis2";
};
pctl_tsin_s3: pctl-tsin-s3 { /* Serial TS-in 3 */
pingrp = "mis3_pins";
abilis,function = "mis3";
};
pctl_gpio_c: pctl-gpio-c { /* GPIO bank C */
pingrp = "gpioc_pins";
abilis,function = "gpioc";
};
pctl_tsin_p3: pctl-tsin-p3 { /* Parallel TS-in 3 */
pingrp = "mip3_pins";
abilis,function = "mip3";
};
/* Port 3 */
pctl_tsin_s4: pctl-tsin-s4 { /* Serial TS-in 4 */
pingrp = "mis4_pins";
abilis,function = "mis4";
};
pctl_tsin_s5: pctl-tsin-s5 { /* Serial TS-in 5 */
pingrp = "mis5_pins";
abilis,function = "mis5";
};
pctl_gpio_e: pctl-gpio-e { /* GPIO bank E */
pingrp = "gpioe_pins";
abilis,function = "gpioe";
};
pctl_tsin_p5: pctl-tsin-p5 { /* Parallel TS-in 5 */
pingrp = "mip5_pins";
abilis,function = "mip5";
};
/* Port 4 */
pctl_tsin_s6: pctl-tsin-s6 { /* Serial TS-in 6 */
pingrp = "mis6_pins";
abilis,function = "mis6";
};
pctl_tsin_s7: pctl-tsin-s7 { /* Serial TS-in 7 */
pingrp = "mis7_pins";
abilis,function = "mis7";
};
pctl_gpio_g: pctl-gpio-g { /* GPIO bank G */
pingrp = "gpiog_pins";
abilis,function = "gpiog";
};
pctl_tsin_p7: pctl-tsin-p7 { /* Parallel TS-in 7 */
pingrp = "mip7_pins";
abilis,function = "mip7";
};
/* Port 5 */
pctl_gpio_j: pctl-gpio-j { /* GPIO bank J */
pingrp = "gpioj_pins";
abilis,function = "gpioj";
};
pctl_gpio_k: pctl-gpio-k { /* GPIO bank K */
pingrp = "gpiok_pins";
abilis,function = "gpiok";
};
pctl_ciplus: pctl-ciplus { /* CI+ interface */
pingrp = "ciplus_pins";
abilis,function = "ciplus";
};
pctl_mcard: pctl-mcard { /* M-Card interface */
pingrp = "mcard_pins";
abilis,function = "mcard";
};
/* Port 6 */
pctl_tsout_p: pctl-tsout-p { /* Parallel TS-out */
pingrp = "mop_pins";
abilis,function = "mop";
};
pctl_tsout_s0: pctl-tsout-s0 { /* Serial TS-out 0 */
pingrp = "mos0_pins";
abilis,function = "mos0";
};
pctl_tsout_s1: pctl-tsout-s1 { /* Serial TS-out 1 */
pingrp = "mos1_pins";
abilis,function = "mos1";
};
pctl_tsout_s2: pctl-tsout-s2 { /* Serial TS-out 2 */
pingrp = "mos2_pins";
abilis,function = "mos2";
};
pctl_tsout_s3: pctl-tsout-s3 { /* Serial TS-out 3 */
pingrp = "mos3_pins";
abilis,function = "mos3";
};
/* Port 7 */
pctl_uart0: pctl-uart0 { /* UART 0 */
pingrp = "uart0_pins";
abilis,function = "uart0";
};
pctl_uart1: pctl-uart1 { /* UART 1 */
pingrp = "uart1_pins";
abilis,function = "uart1";
};
pctl_gpio_l: pctl-gpio-l { /* GPIO bank L */
pingrp = "gpiol_pins";
abilis,function = "gpiol";
};
pctl_gpio_m: pctl-gpio-m { /* GPIO bank M */
pingrp = "gpiom_pins";
abilis,function = "gpiom";
};
/* Port 8 */
pctl_spi3: pctl-spi3 {
pingrp = "spi3_pins";
abilis,function = "spi3";
};
/* Port 9 */
pctl_spi1: pctl-spi1 {
pingrp = "spi1_pins";
abilis,function = "spi1";
};
pctl_gpio_n: pctl-gpio-n {
pingrp = "gpion_pins";
abilis,function = "gpion";
};
/* Unmuxed GPIOs */
pctl_gpio_b: pctl-gpio-b {
pingrp = "gpiob_pins";
abilis,function = "gpiob";
};
pctl_gpio_d: pctl-gpio-d {
pingrp = "gpiod_pins";
abilis,function = "gpiod";
};
pctl_gpio_f: pctl-gpio-f {
pingrp = "gpiof_pins";
abilis,function = "gpiof";
};
pctl_gpio_h: pctl-gpio-h {
pingrp = "gpioh_pins";
abilis,function = "gpioh";
};
pctl_gpio_i: pctl-gpio-i {
pingrp = "gpioi_pins";
abilis,function = "gpioi";
};
};
@ -172,9 +172,10 @@
interrupts = <27 2>;
reg = <0xFF140000 0x1000>;
gpio-controller;
#gpio-cells = <1>;
gpio-base = <0>;
gpio-pins = <&pctl_gpio_a>;
#gpio-cells = <2>;
abilis,ngpio = <3>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpioa";
};
gpiob: gpio@FF141000 {
compatible = "abilis,tb10x-gpio";
@ -184,9 +185,10 @@
interrupts = <27 2>;
reg = <0xFF141000 0x1000>;
gpio-controller;
#gpio-cells = <1>;
gpio-base = <3>;
gpio-pins = <&pctl_gpio_b>;
#gpio-cells = <2>;
abilis,ngpio = <2>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpiob";
};
gpioc: gpio@FF142000 {
compatible = "abilis,tb10x-gpio";
@ -196,9 +198,10 @@
interrupts = <27 2>;
reg = <0xFF142000 0x1000>;
gpio-controller;
#gpio-cells = <1>;
gpio-base = <5>;
gpio-pins = <&pctl_gpio_c>;
#gpio-cells = <2>;
abilis,ngpio = <3>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpioc";
};
gpiod: gpio@FF143000 {
compatible = "abilis,tb10x-gpio";
@ -208,9 +211,10 @@
interrupts = <27 2>;
reg = <0xFF143000 0x1000>;
gpio-controller;
#gpio-cells = <1>;
gpio-base = <8>;
gpio-pins = <&pctl_gpio_d>;
#gpio-cells = <2>;
abilis,ngpio = <2>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpiod";
};
gpioe: gpio@FF144000 {
compatible = "abilis,tb10x-gpio";
@ -220,9 +224,10 @@
interrupts = <27 2>;
reg = <0xFF144000 0x1000>;
gpio-controller;
#gpio-cells = <1>;
gpio-base = <10>;
gpio-pins = <&pctl_gpio_e>;
#gpio-cells = <2>;
abilis,ngpio = <3>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpioe";
};
gpiof: gpio@FF145000 {
compatible = "abilis,tb10x-gpio";
@ -232,9 +237,10 @@
interrupts = <27 2>;
reg = <0xFF145000 0x1000>;
gpio-controller;
#gpio-cells = <1>;
gpio-base = <13>;
gpio-pins = <&pctl_gpio_f>;
#gpio-cells = <2>;
abilis,ngpio = <2>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpiof";
};
gpiog: gpio@FF146000 {
compatible = "abilis,tb10x-gpio";
@ -244,9 +250,10 @@
interrupts = <27 2>;
reg = <0xFF146000 0x1000>;
gpio-controller;
#gpio-cells = <1>;
gpio-base = <15>;
gpio-pins = <&pctl_gpio_g>;
#gpio-cells = <2>;
abilis,ngpio = <3>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpiog";
};
gpioh: gpio@FF147000 {
compatible = "abilis,tb10x-gpio";
@ -256,9 +263,10 @@
interrupts = <27 2>;
reg = <0xFF147000 0x1000>;
gpio-controller;
#gpio-cells = <1>;
gpio-base = <18>;
gpio-pins = <&pctl_gpio_h>;
#gpio-cells = <2>;
abilis,ngpio = <2>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpioh";
};
gpioi: gpio@FF148000 {
compatible = "abilis,tb10x-gpio";
@ -268,9 +276,10 @@
interrupts = <27 2>;
reg = <0xFF148000 0x1000>;
gpio-controller;
#gpio-cells = <1>;
gpio-base = <20>;
gpio-pins = <&pctl_gpio_i>;
#gpio-cells = <2>;
abilis,ngpio = <12>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpioi";
};
gpioj: gpio@FF149000 {
compatible = "abilis,tb10x-gpio";
@ -280,9 +289,10 @@
interrupts = <27 2>;
reg = <0xFF149000 0x1000>;
gpio-controller;
#gpio-cells = <1>;
gpio-base = <32>;
gpio-pins = <&pctl_gpio_j>;
#gpio-cells = <2>;
abilis,ngpio = <32>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpioj";
};
gpiok: gpio@FF14a000 {
compatible = "abilis,tb10x-gpio";
@ -292,9 +302,10 @@
interrupts = <27 2>;
reg = <0xFF14A000 0x1000>;
gpio-controller;
#gpio-cells = <1>;
gpio-base = <64>;
gpio-pins = <&pctl_gpio_k>;
#gpio-cells = <2>;
abilis,ngpio = <22>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpiok";
};
gpiol: gpio@FF14b000 {
compatible = "abilis,tb10x-gpio";
@ -304,9 +315,10 @@
interrupts = <27 2>;
reg = <0xFF14B000 0x1000>;
gpio-controller;
#gpio-cells = <1>;
gpio-base = <86>;
gpio-pins = <&pctl_gpio_l>;
#gpio-cells = <2>;
abilis,ngpio = <4>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpiol";
};
gpiom: gpio@FF14c000 {
compatible = "abilis,tb10x-gpio";
@ -316,9 +328,10 @@
interrupts = <27 2>;
reg = <0xFF14C000 0x1000>;
gpio-controller;
#gpio-cells = <1>;
gpio-base = <90>;
gpio-pins = <&pctl_gpio_m>;
#gpio-cells = <2>;
abilis,ngpio = <4>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpiom";
};
gpion: gpio@FF14d000 {
compatible = "abilis,tb10x-gpio";
@ -328,9 +341,10 @@
interrupts = <27 2>;
reg = <0xFF14D000 0x1000>;
gpio-controller;
#gpio-cells = <1>;
gpio-base = <94>;
gpio-pins = <&pctl_gpio_n>;
#gpio-cells = <2>;
abilis,ngpio = <5>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpion";
};
};
};

24
arch/arc/boot/dts/abilis_tb100_dvk.dts
View File

@ -64,62 +64,62 @@
compatible = "gpio-leds";
power {
label = "Power";
gpios = <&gpioi 0>;
gpios = <&gpioi 0 0>;
linux,default-trigger = "default-on";
};
heartbeat {
label = "Heartbeat";
gpios = <&gpioi 1>;
gpios = <&gpioi 1 0>;
linux,default-trigger = "heartbeat";
};
led2 {
label = "LED2";
gpios = <&gpioi 2>;
gpios = <&gpioi 2 0>;
default-state = "off";
};
led3 {
label = "LED3";
gpios = <&gpioi 3>;
gpios = <&gpioi 3 0>;
default-state = "off";
};
led4 {
label = "LED4";
gpios = <&gpioi 4>;
gpios = <&gpioi 4 0>;
default-state = "off";
};
led5 {
label = "LED5";
gpios = <&gpioi 5>;
gpios = <&gpioi 5 0>;
default-state = "off";
};
led6 {
label = "LED6";
gpios = <&gpioi 6>;
gpios = <&gpioi 6 0>;
default-state = "off";
};
led7 {
label = "LED7";
gpios = <&gpioi 7>;
gpios = <&gpioi 7 0>;
default-state = "off";
};
led8 {
label = "LED8";
gpios = <&gpioi 8>;
gpios = <&gpioi 8 0>;
default-state = "off";
};
led9 {
label = "LED9";
gpios = <&gpioi 9>;
gpios = <&gpioi 9 0>;
default-state = "off";
};
led10 {
label = "LED10";
gpios = <&gpioi 10>;
gpios = <&gpioi 10 0>;
default-state = "off";
};
led11 {
label = "LED11";
gpios = <&gpioi 11>;
gpios = <&gpioi 11 0>;
default-state = "off";
};
};

178
arch/arc/boot/dts/abilis_tb101.dtsi
View File

@ -43,133 +43,133 @@
iomux: iomux@FF10601c {
/* Port 1 */
pctl_tsin_s0: pctl-tsin-s0 { /* Serial TS-in 0 */
pingrp = "mis0_pins";
abilis,function = "mis0";
};
pctl_tsin_s1: pctl-tsin-s1 { /* Serial TS-in 1 */
pingrp = "mis1_pins";
abilis,function = "mis1";
};
pctl_gpio_a: pctl-gpio-a { /* GPIO bank A */
pingrp = "gpioa_pins";
abilis,function = "gpioa";
};
pctl_tsin_p1: pctl-tsin-p1 { /* Parallel TS-in 1 */
pingrp = "mip1_pins";
abilis,function = "mip1";
};
/* Port 2 */
pctl_tsin_s2: pctl-tsin-s2 { /* Serial TS-in 2 */
pingrp = "mis2_pins";
abilis,function = "mis2";
};
pctl_tsin_s3: pctl-tsin-s3 { /* Serial TS-in 3 */
pingrp = "mis3_pins";
abilis,function = "mis3";
};
pctl_gpio_c: pctl-gpio-c { /* GPIO bank C */
pingrp = "gpioc_pins";
abilis,function = "gpioc";
};
pctl_tsin_p3: pctl-tsin-p3 { /* Parallel TS-in 3 */
pingrp = "mip3_pins";
abilis,function = "mip3";
};
/* Port 3 */
pctl_tsin_s4: pctl-tsin-s4 { /* Serial TS-in 4 */
pingrp = "mis4_pins";
abilis,function = "mis4";
};
pctl_tsin_s5: pctl-tsin-s5 { /* Serial TS-in 5 */
pingrp = "mis5_pins";
abilis,function = "mis5";
};
pctl_gpio_e: pctl-gpio-e { /* GPIO bank E */
pingrp = "gpioe_pins";
abilis,function = "gpioe";
};
pctl_tsin_p5: pctl-tsin-p5 { /* Parallel TS-in 5 */
pingrp = "mip5_pins";
abilis,function = "mip5";
};
/* Port 4 */
pctl_tsin_s6: pctl-tsin-s6 { /* Serial TS-in 6 */
pingrp = "mis6_pins";
abilis,function = "mis6";
};
pctl_tsin_s7: pctl-tsin-s7 { /* Serial TS-in 7 */
pingrp = "mis7_pins";
abilis,function = "mis7";
};
pctl_gpio_g: pctl-gpio-g { /* GPIO bank G */
pingrp = "gpiog_pins";
abilis,function = "gpiog";
};
pctl_tsin_p7: pctl-tsin-p7 { /* Parallel TS-in 7 */
pingrp = "mip7_pins";
abilis,function = "mip7";
};
/* Port 5 */
pctl_gpio_j: pctl-gpio-j { /* GPIO bank J */
pingrp = "gpioj_pins";
abilis,function = "gpioj";
};
pctl_gpio_k: pctl-gpio-k { /* GPIO bank K */
pingrp = "gpiok_pins";
abilis,function = "gpiok";
};
pctl_ciplus: pctl-ciplus { /* CI+ interface */
pingrp = "ciplus_pins";
abilis,function = "ciplus";
};
pctl_mcard: pctl-mcard { /* M-Card interface */
pingrp = "mcard_pins";
abilis,function = "mcard";
};
pctl_stc0: pctl-stc0 { /* Smart card I/F 0 */
pingrp = "stc0_pins";
abilis,function = "stc0";
};
pctl_stc1: pctl-stc1 { /* Smart card I/F 1 */
pingrp = "stc1_pins";
abilis,function = "stc1";
};
/* Port 6 */
pctl_tsout_p: pctl-tsout-p { /* Parallel TS-out */
pingrp = "mop_pins";
abilis,function = "mop";
};
pctl_tsout_s0: pctl-tsout-s0 { /* Serial TS-out 0 */
pingrp = "mos0_pins";
abilis,function = "mos0";
};
pctl_tsout_s1: pctl-tsout-s1 { /* Serial TS-out 1 */
pingrp = "mos1_pins";
abilis,function = "mos1";
};
pctl_tsout_s2: pctl-tsout-s2 { /* Serial TS-out 2 */
pingrp = "mos2_pins";
abilis,function = "mos2";
};
pctl_tsout_s3: pctl-tsout-s3 { /* Serial TS-out 3 */
pingrp = "mos3_pins";
abilis,function = "mos3";
};
/* Port 7 */
pctl_uart0: pctl-uart0 { /* UART 0 */
pingrp = "uart0_pins";
abilis,function = "uart0";
};
pctl_uart1: pctl-uart1 { /* UART 1 */
pingrp = "uart1_pins";
abilis,function = "uart1";
};
pctl_gpio_l: pctl-gpio-l { /* GPIO bank L */
pingrp = "gpiol_pins";
abilis,function = "gpiol";
};
pctl_gpio_m: pctl-gpio-m { /* GPIO bank M */
pingrp = "gpiom_pins";
abilis,function = "gpiom";
};
/* Port 8 */
pctl_spi3: pctl-spi3 {
pingrp = "spi3_pins";
abilis,function = "spi3";
};
pctl_jtag: pctl-jtag {
pingrp = "jtag_pins";
abilis,function = "jtag";
};
/* Port 9 */
pctl_spi1: pctl-spi1 {
pingrp = "spi1_pins";
abilis,function = "spi1";
};
pctl_gpio_n: pctl-gpio-n {
pingrp = "gpion_pins";
abilis,function = "gpion";
};
/* Unmuxed GPIOs */
pctl_gpio_b: pctl-gpio-b {
pingrp = "gpiob_pins";
abilis,function = "gpiob";
};
pctl_gpio_d: pctl-gpio-d {
pingrp = "gpiod_pins";
abilis,function = "gpiod";
};
pctl_gpio_f: pctl-gpio-f {
pingrp = "gpiof_pins";
abilis,function = "gpiof";
};
pctl_gpio_h: pctl-gpio-h {
pingrp = "gpioh_pins";
abilis,function = "gpioh";
};
pctl_gpio_i: pctl-gpio-i {
pingrp = "gpioi_pins";
abilis,function = "gpioi";
};
};
@ -181,9 +181,10 @@
interrupts = <27 2>;
reg = <0xFF140000 0x1000>;
gpio-controller;
#gpio-cells = <1>;
gpio-base = <0>;
gpio-pins = <&pctl_gpio_a>;
#gpio-cells = <2>;
abilis,ngpio = <3>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpioa";
};
gpiob: gpio@FF141000 {
compatible = "abilis,tb10x-gpio";
@ -193,9 +194,10 @@
interrupts = <27 2>;
reg = <0xFF141000 0x1000>;
gpio-controller;
#gpio-cells = <1>;
gpio-base = <3>;
gpio-pins = <&pctl_gpio_b>;
#gpio-cells = <2>;
abilis,ngpio = <2>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpiob";
};
gpioc: gpio@FF142000 {
compatible = "abilis,tb10x-gpio";
@ -205,9 +207,10 @@
interrupts = <27 2>;
reg = <0xFF142000 0x1000>;
gpio-controller;
#gpio-cells = <1>;
gpio-base = <5>;
gpio-pins = <&pctl_gpio_c>;
#gpio-cells = <2>;
abilis,ngpio = <3>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpioc";
};
gpiod: gpio@FF143000 {
compatible = "abilis,tb10x-gpio";
@ -217,9 +220,10 @@
interrupts = <27 2>;
reg = <0xFF143000 0x1000>;
gpio-controller;
#gpio-cells = <1>;
gpio-base = <8>;
gpio-pins = <&pctl_gpio_d>;
#gpio-cells = <2>;
abilis,ngpio = <2>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpiod";
};
gpioe: gpio@FF144000 {
compatible = "abilis,tb10x-gpio";
@ -229,9 +233,10 @@
interrupts = <27 2>;
reg = <0xFF144000 0x1000>;
gpio-controller;
#gpio-cells = <1>;
gpio-base = <10>;
gpio-pins = <&pctl_gpio_e>;
#gpio-cells = <2>;
abilis,ngpio = <3>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpioe";
};
gpiof: gpio@FF145000 {
compatible = "abilis,tb10x-gpio";
@ -241,9 +246,10 @@
interrupts = <27 2>;
reg = <0xFF145000 0x1000>;
gpio-controller;
#gpio-cells = <1>;
gpio-base = <13>;
gpio-pins = <&pctl_gpio_f>;
#gpio-cells = <2>;
abilis,ngpio = <2>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpiof";
};
gpiog: gpio@FF146000 {
compatible = "abilis,tb10x-gpio";
@ -253,9 +259,10 @@
interrupts = <27 2>;
reg = <0xFF146000 0x1000>;
gpio-controller;
#gpio-cells = <1>;
gpio-base = <15>;
gpio-pins = <&pctl_gpio_g>;
#gpio-cells = <2>;
abilis,ngpio = <3>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpiog";
};
gpioh: gpio@FF147000 {
compatible = "abilis,tb10x-gpio";
@ -265,9 +272,10 @@
interrupts = <27 2>;
reg = <0xFF147000 0x1000>;
gpio-controller;
#gpio-cells = <1>;
gpio-base = <18>;
gpio-pins = <&pctl_gpio_h>;
#gpio-cells = <2>;
abilis,ngpio = <2>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpioh";
};
gpioi: gpio@FF148000 {
compatible = "abilis,tb10x-gpio";
@ -277,9 +285,10 @@
interrupts = <27 2>;
reg = <0xFF148000 0x1000>;
gpio-controller;
#gpio-cells = <1>;
gpio-base = <20>;
gpio-pins = <&pctl_gpio_i>;
#gpio-cells = <2>;
abilis,ngpio = <12>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpioi";
};
gpioj: gpio@FF149000 {
compatible = "abilis,tb10x-gpio";
@ -289,9 +298,10 @@
interrupts = <27 2>;
reg = <0xFF149000 0x1000>;
gpio-controller;
#gpio-cells = <1>;
gpio-base = <32>;
gpio-pins = <&pctl_gpio_j>;
#gpio-cells = <2>;
abilis,ngpio = <32>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpioj";
};
gpiok: gpio@FF14a000 {
compatible = "abilis,tb10x-gpio";
@ -301,9 +311,10 @@
interrupts = <27 2>;
reg = <0xFF14A000 0x1000>;
gpio-controller;
#gpio-cells = <1>;
gpio-base = <64>;
gpio-pins = <&pctl_gpio_k>;
#gpio-cells = <2>;
abilis,ngpio = <22>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpiok";
};
gpiol: gpio@FF14b000 {
compatible = "abilis,tb10x-gpio";
@ -313,9 +324,10 @@
interrupts = <27 2>;
reg = <0xFF14B000 0x1000>;
gpio-controller;
#gpio-cells = <1>;
gpio-base = <86>;
gpio-pins = <&pctl_gpio_l>;
#gpio-cells = <2>;
abilis,ngpio = <4>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpiol";
};
gpiom: gpio@FF14c000 {
compatible = "abilis,tb10x-gpio";
@ -325,9 +337,10 @@
interrupts = <27 2>;
reg = <0xFF14C000 0x1000>;
gpio-controller;
#gpio-cells = <1>;
gpio-base = <90>;
gpio-pins = <&pctl_gpio_m>;
#gpio-cells = <2>;
abilis,ngpio = <4>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpiom";
};
gpion: gpio@FF14d000 {
compatible = "abilis,tb10x-gpio";
@ -337,9 +350,10 @@
interrupts = <27 2>;
reg = <0xFF14D000 0x1000>;
gpio-controller;
#gpio-cells = <1>;
gpio-base = <94>;
gpio-pins = <&pctl_gpio_n>;
#gpio-cells = <2>;
abilis,ngpio = <5>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpion";
};
};
};

24
arch/arc/boot/dts/abilis_tb101_dvk.dts
View File

@ -64,62 +64,62 @@
compatible = "gpio-leds";
power {
label = "Power";
gpios = <&gpioi 0>;
gpios = <&gpioi 0 0>;
linux,default-trigger = "default-on";
};
heartbeat {
label = "Heartbeat";
gpios = <&gpioi 1>;
gpios = <&gpioi 1 0>;
linux,default-trigger = "heartbeat";
};
led2 {
label = "LED2";
gpios = <&gpioi 2>;
gpios = <&gpioi 2 0>;
default-state = "off";
};
led3 {
label = "LED3";
gpios = <&gpioi 3>;
gpios = <&gpioi 3 0>;
default-state = "off";
};
led4 {
label = "LED4";
gpios = <&gpioi 4>;
gpios = <&gpioi 4 0>;
default-state = "off";
};
led5 {
label = "LED5";
gpios = <&gpioi 5>;
gpios = <&gpioi 5 0>;
default-state = "off";
};
led6 {
label = "LED6";
gpios = <&gpioi 6>;
gpios = <&gpioi 6 0>;
default-state = "off";
};
led7 {
label = "LED7";
gpios = <&gpioi 7>;
gpios = <&gpioi 7 0>;
default-state = "off";
};
led8 {
label = "LED8";
gpios = <&gpioi 8>;
gpios = <&gpioi 8 0>;
default-state = "off";
};
led9 {
label = "LED9";
gpios = <&gpioi 9>;
gpios = <&gpioi 9 0>;
default-state = "off";
};
led10 {
label = "LED10";
gpios = <&gpioi 10>;
gpios = <&gpioi 10 0>;
default-state = "off";
};
led11 {
label = "LED11";
gpios = <&gpioi 11>;
gpios = <&gpioi 11 0>;
default-state = "off";
};
};

3
arch/arc/boot/dts/abilis_tb10x.dtsi
View File

@ -62,9 +62,8 @@
};
iomux: iomux@FF10601c {
#address-cells = <1>;
#size-cells = <1>;
compatible = "abilis,tb10x-iomux";
#gpio-range-cells = <3>;
reg = <0xFF10601c 0x4>;
};

4
arch/arc/boot/dts/angel4.dts
View File

@ -67,5 +67,9 @@
reg = <1>;
};
};
arcpmu0: pmu {
compatible = "snps,arc700-pmu";
};
};
};

64
arch/arc/configs/fpga_noramfs_defconfig Normal file
View File

@ -0,0 +1,64 @@
CONFIG_CROSS_COMPILE="arc-linux-uclibc-"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_DEFAULT_HOSTNAME="ARCLinux"
# CONFIG_SWAP is not set
CONFIG_HIGH_RES_TIMERS=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_KALLSYMS_ALL=y
CONFIG_EMBEDDED=y
# CONFIG_SLUB_DEBUG is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_KPROBES=y
CONFIG_MODULES=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARC_PLAT_FPGA_LEGACY=y
CONFIG_ARC_BOARD_ML509=y
# CONFIG_ARC_HAS_RTSC is not set
CONFIG_ARC_BUILTIN_DTB_NAME="angel4"
CONFIG_PREEMPT=y
# CONFIG_COMPACTION is not set
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_UNIX_DIAG=y
CONFIG_NET_KEY=y
CONFIG_INET=y
# CONFIG_IPV6 is not set
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FIRMWARE_IN_KERNEL is not set
# CONFIG_BLK_DEV is not set
CONFIG_NETDEVICES=y
CONFIG_ARC_EMAC=y
CONFIG_LXT_PHY=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_ARC=y
CONFIG_SERIAL_ARC_CONSOLE=y
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
# CONFIG_VGA_CONSOLE is not set
# CONFIG_HID is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_TMPFS=y
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NFS_FS=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_XZ_DEC=y

204
arch/arc/include/asm/perf_event.h
View File

@ -1,5 +1,7 @@
/*
* Copyright (C) 2011-2012 Synopsys, Inc. (www.synopsys.com)
* Linux performance counter support for ARC
*
* Copyright (C) 2011-2013 Synopsys, Inc. (www.synopsys.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@ -10,4 +12,204 @@
#ifndef __ASM_PERF_EVENT_H
#define __ASM_PERF_EVENT_H
/* real maximum varies per CPU, this is the maximum supported by the driver */
#define ARC_PMU_MAX_HWEVENTS 64
#define ARC_REG_CC_BUILD 0xF6
#define ARC_REG_CC_INDEX 0x240
#define ARC_REG_CC_NAME0 0x241
#define ARC_REG_CC_NAME1 0x242
#define ARC_REG_PCT_BUILD 0xF5
#define ARC_REG_PCT_COUNTL 0x250
#define ARC_REG_PCT_COUNTH 0x251
#define ARC_REG_PCT_SNAPL 0x252
#define ARC_REG_PCT_SNAPH 0x253
#define ARC_REG_PCT_CONFIG 0x254
#define ARC_REG_PCT_CONTROL 0x255
#define ARC_REG_PCT_INDEX 0x256
#define ARC_REG_PCT_CONTROL_CC (1 << 16) /* clear counts */
#define ARC_REG_PCT_CONTROL_SN (1 << 17) /* snapshot */
struct arc_reg_pct_build {
#ifdef CONFIG_CPU_BIG_ENDIAN
unsigned int m:8, c:8, r:6, s:2, v:8;
#else
unsigned int v:8, s:2, r:6, c:8, m:8;
#endif
};
struct arc_reg_cc_build {
#ifdef CONFIG_CPU_BIG_ENDIAN
unsigned int c:16, r:8, v:8;
#else
unsigned int v:8, r:8, c:16;
#endif
};
#define PERF_COUNT_ARC_DCLM (PERF_COUNT_HW_MAX + 0)
#define PERF_COUNT_ARC_DCSM (PERF_COUNT_HW_MAX + 1)
#define PERF_COUNT_ARC_ICM (PERF_COUNT_HW_MAX + 2)
#define PERF_COUNT_ARC_BPOK (PERF_COUNT_HW_MAX + 3)
#define PERF_COUNT_ARC_EDTLB (PERF_COUNT_HW_MAX + 4)
#define PERF_COUNT_ARC_EITLB (PERF_COUNT_HW_MAX + 5)
#define PERF_COUNT_ARC_HW_MAX (PERF_COUNT_HW_MAX + 6)
/*
* The "generalized" performance events seem to really be a copy
* of the available events on x86 processors; the mapping to ARC
* events is not always possible 1-to-1. Fortunately, there doesn't
* seem to be an exact definition for these events, so we can cheat
* a bit where necessary.
*
* In particular, the following PERF events may behave a bit differently
* compared to other architectures:
*
* PERF_COUNT_HW_CPU_CYCLES
* Cycles not in halted state
*
* PERF_COUNT_HW_REF_CPU_CYCLES
* Reference cycles not in halted state, same as PERF_COUNT_HW_CPU_CYCLES
* for now as we don't do Dynamic Voltage/Frequency Scaling (yet)
*
* PERF_COUNT_HW_BUS_CYCLES
* Unclear what this means, Intel uses 0x013c, which according to
* their datasheet means "unhalted reference cycles". It sounds similar
* to PERF_COUNT_HW_REF_CPU_CYCLES, and we use the same counter for it.
*
* PERF_COUNT_HW_STALLED_CYCLES_BACKEND
* PERF_COUNT_HW_STALLED_CYCLES_FRONTEND
* The ARC 700 can either measure stalls per pipeline stage, or all stalls
* combined; for now we assign all stalls to STALLED_CYCLES_BACKEND
* and all pipeline flushes (e.g. caused by mispredicts, etc.) to
* STALLED_CYCLES_FRONTEND.
*
* We could start multiple performance counters and combine everything
* afterwards, but that makes it complicated.
*
* Note that I$ cache misses aren't counted by either of the two!
*/
static const char * const arc_pmu_ev_hw_map[] = {
[PERF_COUNT_HW_CPU_CYCLES] = "crun",
[PERF_COUNT_HW_REF_CPU_CYCLES] = "crun",
[PERF_COUNT_HW_BUS_CYCLES] = "crun",
[PERF_COUNT_HW_INSTRUCTIONS] = "iall",
[PERF_COUNT_HW_BRANCH_MISSES] = "bpfail",
[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = "ijmp",
[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = "bflush",
[PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = "bstall",
[PERF_COUNT_ARC_DCLM] = "dclm",
[PERF_COUNT_ARC_DCSM] = "dcsm",
[PERF_COUNT_ARC_ICM] = "icm",
[PERF_COUNT_ARC_BPOK] = "bpok",
[PERF_COUNT_ARC_EDTLB] = "edtlb",
[PERF_COUNT_ARC_EITLB] = "eitlb",
};
#define C(_x) PERF_COUNT_HW_CACHE_##_x
#define CACHE_OP_UNSUPPORTED 0xffff
static const unsigned arc_pmu_cache_map[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
[C(L1D)] = {
[C(OP_READ)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = PERF_COUNT_ARC_DCLM,
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = PERF_COUNT_ARC_DCSM,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
},
[C(L1I)] = {
[C(OP_READ)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = PERF_COUNT_ARC_ICM,
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
},
[C(LL)] = {
[C(OP_READ)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
},
[C(DTLB)] = {
[C(OP_READ)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = PERF_COUNT_ARC_EDTLB,
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
},
[C(ITLB)] = {
[C(OP_READ)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = PERF_COUNT_ARC_EITLB,
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
},
[C(BPU)] = {
[C(OP_READ)] = {
[C(RESULT_ACCESS)] = PERF_COUNT_HW_BRANCH_INSTRUCTIONS,
[C(RESULT_MISS)] = PERF_COUNT_HW_BRANCH_MISSES,
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
},
[C(NODE)] = {
[C(OP_READ)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
},
};
#endif /* __ASM_PERF_EVENT_H */

Some files were not shown because too many files have changed in this diff Show More