phy-sun4i-usb: Add support for the host usb-phys found on the H3 SoC
Note this commit only adds support for phys 1-3, phy 0, the otg phy, is not yet (fully) supported after this commit. Signed-off-by: Reinder de Haan <patchesrdh@mveas.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
This commit is contained in:
parent
68dbc2ce77
commit
626a630e00
@ -9,6 +9,7 @@ Required properties:
|
|||||||
* allwinner,sun7i-a20-usb-phy
|
* allwinner,sun7i-a20-usb-phy
|
||||||
* allwinner,sun8i-a23-usb-phy
|
* allwinner,sun8i-a23-usb-phy
|
||||||
* allwinner,sun8i-a33-usb-phy
|
* allwinner,sun8i-a33-usb-phy
|
||||||
|
* allwinner,sun8i-h3-usb-phy
|
||||||
- reg : a list of offset + length pairs
|
- reg : a list of offset + length pairs
|
||||||
- reg-names :
|
- reg-names :
|
||||||
* "phy_ctrl"
|
* "phy_ctrl"
|
||||||
|
@ -47,6 +47,9 @@
|
|||||||
#define REG_PHYBIST 0x08
|
#define REG_PHYBIST 0x08
|
||||||
#define REG_PHYTUNE 0x0c
|
#define REG_PHYTUNE 0x0c
|
||||||
#define REG_PHYCTL_A33 0x10
|
#define REG_PHYCTL_A33 0x10
|
||||||
|
#define REG_PHY_UNK_H3 0x20
|
||||||
|
|
||||||
|
#define REG_PMU_UNK_H3 0x10
|
||||||
|
|
||||||
#define PHYCTL_DATA BIT(7)
|
#define PHYCTL_DATA BIT(7)
|
||||||
|
|
||||||
@ -80,7 +83,7 @@
|
|||||||
#define PHY_DISCON_TH_SEL 0x2a
|
#define PHY_DISCON_TH_SEL 0x2a
|
||||||
#define PHY_SQUELCH_DETECT 0x3c
|
#define PHY_SQUELCH_DETECT 0x3c
|
||||||
|
|
||||||
#define MAX_PHYS 3
|
#define MAX_PHYS 4
|
||||||
|
|
||||||
/*
|
/*
|
||||||
* Note do not raise the debounce time, we must report Vusb high within 100ms
|
* Note do not raise the debounce time, we must report Vusb high within 100ms
|
||||||
@ -92,6 +95,7 @@
|
|||||||
enum sun4i_usb_phy_type {
|
enum sun4i_usb_phy_type {
|
||||||
sun4i_a10_phy,
|
sun4i_a10_phy,
|
||||||
sun8i_a33_phy,
|
sun8i_a33_phy,
|
||||||
|
sun8i_h3_phy,
|
||||||
};
|
};
|
||||||
|
|
||||||
struct sun4i_usb_phy_cfg {
|
struct sun4i_usb_phy_cfg {
|
||||||
@ -239,6 +243,7 @@ static int sun4i_usb_phy_init(struct phy *_phy)
|
|||||||
struct sun4i_usb_phy *phy = phy_get_drvdata(_phy);
|
struct sun4i_usb_phy *phy = phy_get_drvdata(_phy);
|
||||||
struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy);
|
struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy);
|
||||||
int ret;
|
int ret;
|
||||||
|
u32 val;
|
||||||
|
|
||||||
ret = clk_prepare_enable(phy->clk);
|
ret = clk_prepare_enable(phy->clk);
|
||||||
if (ret)
|
if (ret)
|
||||||
@ -250,16 +255,26 @@ static int sun4i_usb_phy_init(struct phy *_phy)
|
|||||||
return ret;
|
return ret;
|
||||||
}
|
}
|
||||||
|
|
||||||
/* Enable USB 45 Ohm resistor calibration */
|
if (data->cfg->type == sun8i_h3_phy) {
|
||||||
if (phy->index == 0)
|
if (phy->index == 0) {
|
||||||
sun4i_usb_phy_write(phy, PHY_RES45_CAL_EN, 0x01, 1);
|
val = readl(data->base + REG_PHY_UNK_H3);
|
||||||
|
writel(val & ~1, data->base + REG_PHY_UNK_H3);
|
||||||
|
}
|
||||||
|
|
||||||
/* Adjust PHY's magnitude and rate */
|
val = readl(phy->pmu + REG_PMU_UNK_H3);
|
||||||
sun4i_usb_phy_write(phy, PHY_TX_AMPLITUDE_TUNE, 0x14, 5);
|
writel(val & ~2, phy->pmu + REG_PMU_UNK_H3);
|
||||||
|
} else {
|
||||||
|
/* Enable USB 45 Ohm resistor calibration */
|
||||||
|
if (phy->index == 0)
|
||||||
|
sun4i_usb_phy_write(phy, PHY_RES45_CAL_EN, 0x01, 1);
|
||||||
|
|
||||||
/* Disconnect threshold adjustment */
|
/* Adjust PHY's magnitude and rate */
|
||||||
sun4i_usb_phy_write(phy, PHY_DISCON_TH_SEL,
|
sun4i_usb_phy_write(phy, PHY_TX_AMPLITUDE_TUNE, 0x14, 5);
|
||||||
data->cfg->disc_thresh, 2);
|
|
||||||
|
/* Disconnect threshold adjustment */
|
||||||
|
sun4i_usb_phy_write(phy, PHY_DISCON_TH_SEL,
|
||||||
|
data->cfg->disc_thresh, 2);
|
||||||
|
}
|
||||||
|
|
||||||
sun4i_usb_phy_passby(phy, 1);
|
sun4i_usb_phy_passby(phy, 1);
|
||||||
|
|
||||||
@ -726,6 +741,13 @@ static const struct sun4i_usb_phy_cfg sun8i_a33_cfg = {
|
|||||||
.dedicated_clocks = true,
|
.dedicated_clocks = true,
|
||||||
};
|
};
|
||||||
|
|
||||||
|
static const struct sun4i_usb_phy_cfg sun8i_h3_cfg = {
|
||||||
|
.num_phys = 4,
|
||||||
|
.type = sun8i_h3_phy,
|
||||||
|
.disc_thresh = 3,
|
||||||
|
.dedicated_clocks = true,
|
||||||
|
};
|
||||||
|
|
||||||
static const struct of_device_id sun4i_usb_phy_of_match[] = {
|
static const struct of_device_id sun4i_usb_phy_of_match[] = {
|
||||||
{ .compatible = "allwinner,sun4i-a10-usb-phy", .data = &sun4i_a10_cfg },
|
{ .compatible = "allwinner,sun4i-a10-usb-phy", .data = &sun4i_a10_cfg },
|
||||||
{ .compatible = "allwinner,sun5i-a13-usb-phy", .data = &sun5i_a13_cfg },
|
{ .compatible = "allwinner,sun5i-a13-usb-phy", .data = &sun5i_a13_cfg },
|
||||||
@ -733,6 +755,7 @@ static const struct of_device_id sun4i_usb_phy_of_match[] = {
|
|||||||
{ .compatible = "allwinner,sun7i-a20-usb-phy", .data = &sun7i_a20_cfg },
|
{ .compatible = "allwinner,sun7i-a20-usb-phy", .data = &sun7i_a20_cfg },
|
||||||
{ .compatible = "allwinner,sun8i-a23-usb-phy", .data = &sun8i_a23_cfg },
|
{ .compatible = "allwinner,sun8i-a23-usb-phy", .data = &sun8i_a23_cfg },
|
||||||
{ .compatible = "allwinner,sun8i-a33-usb-phy", .data = &sun8i_a33_cfg },
|
{ .compatible = "allwinner,sun8i-a33-usb-phy", .data = &sun8i_a33_cfg },
|
||||||
|
{ .compatible = "allwinner,sun8i-h3-usb-phy", .data = &sun8i_h3_cfg },
|
||||||
{ },
|
{ },
|
||||||
};
|
};
|
||||||
MODULE_DEVICE_TABLE(of, sun4i_usb_phy_of_match);
|
MODULE_DEVICE_TABLE(of, sun4i_usb_phy_of_match);
|
||||||
|
Loading…
Reference in New Issue
Block a user