drivers/video/s3c-fb.c: fix clock setting for Samsung SoC Framebuffer

Correct the CLKVAL_F field value of VIDEO MAIN CONTROLLER 0 REGITSTER.

Frame Rate is 1 / [ { (VSPW+1) + (VBPD+1) + (LIINEVAL + 1) + (VFPD+1)
} x {(HSPW+1) + (HBPD +1)
+ (HFPD+1) + (HOZVAL + 1) } x { ( CLKVAL+1 ) / ( Frequency of Clock
source ) } ] and VCLK = Video Clock Source / (CLKVAL +1).

therefore CLKVAL_F should be "CLKVAL_F = Frequency of Clock source / pixel
clock * refresh".

for this, I added refresh value in platform data like below.

static struct s3c_fb_pd_win xxx_fb_win0 = {
	/* this is to ensure we use win0 */
	.win_mode = {
		.refresh	= 60,
		.pixclock	= (66+4+2+480)*(15+5+3+800),
		.left_margin	= 66,
		.right_margin	= 2,
		.upper_margin	= 15,
		.lower_margin	= 3,
		.hsync_len	= 4,
		.vsync_len	= 5,
		.xres		= 480,
		.yres		= 800,
	},
	.max_bpp	= 32,
	.default_bpp	= 24,
};

static struct s3c_fb_platdata xxx_lcd_pdata __initdata = {
	.win[0]		= &xxx_fb_win0,
	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC
			| VIDCON1_INV_VCLK | VIDCON1_INV_VDEN,
	.setup_gpio	= s5pc1xx_fb_gpio_setup_24bpp,
};

xxx_machine_init()
{
                   .
                   .
                   .
               s3c_fb_set_platdata(&xxx_lcd_pdata);
}

platform data defined in machine code should be setting using
s3c_fb_set_platdata().

Signed-off-by: InKi Dae <inki.dae@samsung.com>
Cc: Kyungmin Park <kmpark@infradead.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit is contained in:
InKi Dae 2009-07-05 12:08:21 -07:00 committed by Linus Torvalds
parent 5bfd756097
commit 600ce1a0fa

View File

@ -211,23 +211,21 @@ static int s3c_fb_check_var(struct fb_var_screeninfo *var,
/**
* s3c_fb_calc_pixclk() - calculate the divider to create the pixel clock.
* @id: window id.
* @sfb: The hardware state.
* @pixclock: The pixel clock wanted, in picoseconds.
*
* Given the specified pixel clock, work out the necessary divider to get
* close to the output frequency.
*/
static int s3c_fb_calc_pixclk(struct s3c_fb *sfb, unsigned int pixclk)
static int s3c_fb_calc_pixclk(unsigned char id, struct s3c_fb *sfb, unsigned int pixclk)
{
struct s3c_fb_pd_win *win = sfb->pdata->win[id];
unsigned long clk = clk_get_rate(sfb->bus_clk);
unsigned long long tmp;
unsigned int result;
tmp = (unsigned long long)clk;
tmp *= pixclk;
do_div(tmp, 1000000000UL);
result = (unsigned int)tmp / 1000;
pixclk *= win->win_mode.refresh;
result = clk / pixclk;
dev_dbg(sfb->dev, "pixclk=%u, clk=%lu, div=%d (%lu)\n",
pixclk, clk, result, clk / result);
@ -267,6 +265,7 @@ static int s3c_fb_set_par(struct fb_info *info)
struct s3c_fb *sfb = win->parent;
void __iomem *regs = sfb->regs;
int win_no = win->index;
u32 osdc_data = 0;
u32 data;
u32 pagewidth;
int clkdiv;
@ -302,7 +301,7 @@ static int s3c_fb_set_par(struct fb_info *info)
/* use window 0 as the basis for the lcd output timings */
if (win_no == 0) {
clkdiv = s3c_fb_calc_pixclk(sfb, var->pixclock);
clkdiv = s3c_fb_calc_pixclk(win_no, sfb, var->pixclock);
data = sfb->pdata->vidcon0;
data &= ~(VIDCON0_CLKVAL_F_MASK | VIDCON0_CLKDIR);
@ -359,8 +358,6 @@ static int s3c_fb_set_par(struct fb_info *info)
data = var->xres * var->yres;
u32 osdc_data = 0;
osdc_data = VIDISD14C_ALPHA1_R(0xf) |
VIDISD14C_ALPHA1_G(0xf) |
VIDISD14C_ALPHA1_B(0xf);