forked from Minki/linux
[MFD] Add SA11x0 MCP support
This adds support for the MCP interface found on SA11x0 devices. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This commit is contained in:
Russell King
Russell King
parent
a4e137ab14
commit
5e742ad66b
@ -7,4 +7,10 @@ menu "Multimedia Capabilities Port drivers"
|
||||
config MCP
|
||||
tristate
|
||||
|
||||
# Interface drivers
|
||||
config MCP_SA11X0
|
||||
tristate "Support SA11x0 MCP interface"
|
||||
depends on ARCH_SA1100
|
||||
select MCP
|
||||
|
||||
endmenu
|
||||
|
||||
@ -3,3 +3,4 @@
|
||||
#
|
||||
|
||||
obj-$(CONFIG_MCP) += mcp-core.o
|
||||
obj-$(CONFIG_MCP_SA11X0) += mcp-sa11x0.o
|
||||
|
||||
275
drivers/mfd/mcp-sa11x0.c
Normal file
275
drivers/mfd/mcp-sa11x0.c
Normal file
@ -0,0 +1,275 @@
|
||||
/*
|
||||
* linux/drivers/mfd/mcp-sa11x0.c
|
||||
*
|
||||
* Copyright (C) 2001-2005 Russell King
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License.
|
||||
*
|
||||
* SA11x0 MCP (Multimedia Communications Port) driver.
|
||||
*
|
||||
* MCP read/write timeouts from Jordi Colomer, rehacked by rmk.
|
||||
*/
|
||||
#include <linux/module.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/errno.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/spinlock.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/device.h>
|
||||
|
||||
#include <asm/dma.h>
|
||||
#include <asm/hardware.h>
|
||||
#include <asm/mach-types.h>
|
||||
#include <asm/system.h>
|
||||
|
||||
#include <asm/arch/assabet.h>
|
||||
|
||||
#include "mcp.h"
|
||||
|
||||
struct mcp_sa11x0 {
|
||||
u32 mccr0;
|
||||
u32 mccr1;
|
||||
};
|
||||
|
||||
#define priv(mcp) ((struct mcp_sa11x0 *)mcp_priv(mcp))
|
||||
|
||||
static void
|
||||
mcp_sa11x0_set_telecom_divisor(struct mcp *mcp, unsigned int divisor)
|
||||
{
|
||||
unsigned int mccr0;
|
||||
|
||||
divisor /= 32;
|
||||
|
||||
mccr0 = Ser4MCCR0 & ~0x00007f00;
|
||||
mccr0 |= divisor << 8;
|
||||
Ser4MCCR0 = mccr0;
|
||||
}
|
||||
|
||||
static void
|
||||
mcp_sa11x0_set_audio_divisor(struct mcp *mcp, unsigned int divisor)
|
||||
{
|
||||
unsigned int mccr0;
|
||||
|
||||
divisor /= 32;
|
||||
|
||||
mccr0 = Ser4MCCR0 & ~0x0000007f;
|
||||
mccr0 |= divisor;
|
||||
Ser4MCCR0 = mccr0;
|
||||
}
|
||||
|
||||
/*
|
||||
* Write data to the device. The bit should be set after 3 subframe
|
||||
* times (each frame is 64 clocks). We wait a maximum of 6 subframes.
|
||||
* We really should try doing something more productive while we
|
||||
* wait.
|
||||
*/
|
||||
static void
|
||||
mcp_sa11x0_write(struct mcp *mcp, unsigned int reg, unsigned int val)
|
||||
{
|
||||
int ret = -ETIME;
|
||||
int i;
|
||||
|
||||
Ser4MCDR2 = reg << 17 | MCDR2_Wr | (val & 0xffff);
|
||||
|
||||
for (i = 0; i < 2; i++) {
|
||||
udelay(mcp->rw_timeout);
|
||||
if (Ser4MCSR & MCSR_CWC) {
|
||||
ret = 0;
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
if (ret < 0)
|
||||
printk(KERN_WARNING "mcp: write timed out\n");
|
||||
}
|
||||
|
||||
/*
|
||||
* Read data from the device. The bit should be set after 3 subframe
|
||||
* times (each frame is 64 clocks). We wait a maximum of 6 subframes.
|
||||
* We really should try doing something more productive while we
|
||||
* wait.
|
||||
*/
|
||||
static unsigned int
|
||||
mcp_sa11x0_read(struct mcp *mcp, unsigned int reg)
|
||||
{
|
||||
int ret = -ETIME;
|
||||
int i;
|
||||
|
||||
Ser4MCDR2 = reg << 17 | MCDR2_Rd;
|
||||
|
||||
for (i = 0; i < 2; i++) {
|
||||
udelay(mcp->rw_timeout);
|
||||
if (Ser4MCSR & MCSR_CRC) {
|
||||
ret = Ser4MCDR2 & 0xffff;
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
if (ret < 0)
|
||||
printk(KERN_WARNING "mcp: read timed out\n");
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static void mcp_sa11x0_enable(struct mcp *mcp)
|
||||
{
|
||||
Ser4MCSR = -1;
|
||||
Ser4MCCR0 |= MCCR0_MCE;
|
||||
}
|
||||
|
||||
static void mcp_sa11x0_disable(struct mcp *mcp)
|
||||
{
|
||||
Ser4MCCR0 &= ~MCCR0_MCE;
|
||||
}
|
||||
|
||||
/*
|
||||
* Our methods.
|
||||
*/
|
||||
static struct mcp_ops mcp_sa11x0 = {
|
||||
.set_telecom_divisor = mcp_sa11x0_set_telecom_divisor,
|
||||
.set_audio_divisor = mcp_sa11x0_set_audio_divisor,
|
||||
.reg_write = mcp_sa11x0_write,
|
||||
.reg_read = mcp_sa11x0_read,
|
||||
.enable = mcp_sa11x0_enable,
|
||||
.disable = mcp_sa11x0_disable,
|
||||
};
|
||||
|
||||
static int mcp_sa11x0_probe(struct device *dev)
|
||||
{
|
||||
struct platform_device *pdev = to_platform_device(dev);
|
||||
struct mcp *mcp;
|
||||
int ret;
|
||||
|
||||
if (!machine_is_adsbitsy() && !machine_is_assabet() &&
|
||||
!machine_is_cerf() && !machine_is_flexanet() &&
|
||||
!machine_is_freebird() && !machine_is_graphicsclient() &&
|
||||
!machine_is_graphicsmaster() && !machine_is_lart() &&
|
||||
!machine_is_omnimeter() && !machine_is_pfs168() &&
|
||||
!machine_is_shannon() && !machine_is_simpad() &&
|
||||
!machine_is_yopy())
|
||||
return -ENODEV;
|
||||
|
||||
if (!request_mem_region(0x80060000, 0x60, "sa11x0-mcp"))
|
||||
return -EBUSY;
|
||||
|
||||
mcp = mcp_host_alloc(&pdev->dev, sizeof(struct mcp_sa11x0));
|
||||
if (!mcp) {
|
||||
ret = -ENOMEM;
|
||||
goto release;
|
||||
}
|
||||
|
||||
mcp->owner = THIS_MODULE;
|
||||
mcp->ops = &mcp_sa11x0;
|
||||
mcp->sclk_rate = 11981000,
|
||||
mcp->dma_audio_rd = DMA_Ser4MCP0Rd;
|
||||
mcp->dma_audio_wr = DMA_Ser4MCP0Wr;
|
||||
mcp->dma_telco_rd = DMA_Ser4MCP1Rd;
|
||||
mcp->dma_telco_wr = DMA_Ser4MCP1Wr;
|
||||
|
||||
dev_set_drvdata(dev, mcp);
|
||||
|
||||
if (machine_is_assabet()) {
|
||||
ASSABET_BCR_set(ASSABET_BCR_CODEC_RST);
|
||||
}
|
||||
|
||||
/*
|
||||
* Setup the PPC unit correctly.
|
||||
*/
|
||||
PPDR &= ~PPC_RXD4;
|
||||
PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
|
||||
PSDR |= PPC_RXD4;
|
||||
PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
|
||||
PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
|
||||
|
||||
Ser4MCSR = -1;
|
||||
Ser4MCCR1 = 0;
|
||||
Ser4MCCR0 = 0x00007f7f | MCCR0_ADM;
|
||||
|
||||
/*
|
||||
* Calculate the read/write timeout (us) from the bit clock
|
||||
* rate. This is the period for 3 64-bit frames. Always
|
||||
* round this time up.
|
||||
*/
|
||||
mcp->rw_timeout = (64 * 3 * 1000000 + mcp->sclk_rate - 1) /
|
||||
mcp->sclk_rate;
|
||||
|
||||
ret = mcp_host_register(mcp);
|
||||
if (ret == 0)
|
||||
goto out;
|
||||
|
||||
release:
|
||||
release_mem_region(0x80060000, 0x60);
|
||||
dev_set_drvdata(dev, NULL);
|
||||
|
||||
out:
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int mcp_sa11x0_remove(struct device *dev)
|
||||
{
|
||||
struct mcp *mcp = dev_get_drvdata(dev);
|
||||
|
||||
dev_set_drvdata(dev, NULL);
|
||||
mcp_host_unregister(mcp);
|
||||
release_mem_region(0x80060000, 0x60);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int mcp_sa11x0_suspend(struct device *dev, pm_message_t state, u32 level)
|
||||
{
|
||||
struct mcp *mcp = dev_get_drvdata(dev);
|
||||
|
||||
if (level == SUSPEND_DISABLE) {
|
||||
priv(mcp)->mccr0 = Ser4MCCR0;
|
||||
priv(mcp)->mccr1 = Ser4MCCR1;
|
||||
Ser4MCCR0 &= ~MCCR0_MCE;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int mcp_sa11x0_resume(struct device *dev, u32 level)
|
||||
{
|
||||
struct mcp *mcp = dev_get_drvdata(dev);
|
||||
|
||||
if (level == RESUME_RESTORE_STATE) {
|
||||
Ser4MCCR1 = priv(mcp)->mccr1;
|
||||
Ser4MCCR0 = priv(mcp)->mccr0;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
* The driver for the SA11x0 MCP port.
|
||||
*/
|
||||
static struct device_driver mcp_sa11x0_driver = {
|
||||
.name = "sa11x0-mcp",
|
||||
.bus = &platform_bus_type,
|
||||
.probe = mcp_sa11x0_probe,
|
||||
.remove = mcp_sa11x0_remove,
|
||||
.suspend = mcp_sa11x0_suspend,
|
||||
.resume = mcp_sa11x0_resume,
|
||||
};
|
||||
|
||||
/*
|
||||
* This needs re-working
|
||||
*/
|
||||
static int __init mcp_sa11x0_init(void)
|
||||
{
|
||||
return driver_register(&mcp_sa11x0_driver);
|
||||
}
|
||||
|
||||
static void __exit mcp_sa11x0_exit(void)
|
||||
{
|
||||
driver_unregister(&mcp_sa11x0_driver);
|
||||
}
|
||||
|
||||
module_init(mcp_sa11x0_init);
|
||||
module_exit(mcp_sa11x0_exit);
|
||||
|
||||
MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>");
|
||||
MODULE_DESCRIPTION("SA11x0 multimedia communications port driver");
|
||||
MODULE_LICENSE("GPL");
|
||||
Loading…
Reference in New Issue
Block a user