Merge branches 'pm-sleep', 'pm-domains', 'pm-opp' and 'powercap'

* pm-sleep:
  PM / wakeirq: remove unnecessary parentheses
  PM / core: Clean up some function headers in power.h
  PM / hibernate: memory_bm_find_bit(): Tighten node optimisation

* pm-domains:
  PM / Domains: Convert to dev_to_genpd_safe() in genpd_syscore_switch()
  mmc: tmio: Avoid boilerplate code in ->runtime_suspend()
  PM / Domains: Implement the ->start() callback for genpd
  PM / Domains: Introduce dev_pm_domain_start()

* pm-opp:
  PM / OPP: Support adjusting OPP voltages at runtime

* powercap:
  powercap/intel_rapl: add support for Cometlake desktop
  powercap/intel_rapl: add support for CometLake Mobile

drivers/base/power/common.c

@@ -187,6 +187,26 @@ void dev_pm_domain_detach(struct device *dev, bool power_off)
 }
 EXPORT_SYMBOL_GPL(dev_pm_domain_detach);
 
+/**
+ * dev_pm_domain_start - Start the device through its PM domain.
+ * @dev: Device to start.
+ *
+ * This function should typically be called during probe by a subsystem/driver,
+ * when it needs to start its device from the PM domain's perspective. Note
+ * that, it's assumed that the PM domain is already powered on when this
+ * function is called.
+ *
+ * Returns 0 on success and negative error values on failures.
+ */
+int dev_pm_domain_start(struct device *dev)
+{
+	if (dev->pm_domain && dev->pm_domain->start)
+		return dev->pm_domain->start(dev);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(dev_pm_domain_start);
+
 /**
  * dev_pm_domain_set - Set PM domain of a device.
  * @dev: Device whose PM domain is to be set.

drivers/base/power/domain.c

@@ -634,6 +634,13 @@ static int genpd_power_on(struct generic_pm_domain *genpd, unsigned int depth)
 	return ret;
 }
 
+static int genpd_dev_pm_start(struct device *dev)
+{
+	struct generic_pm_domain *genpd = dev_to_genpd(dev);
+
+	return genpd_start_dev(genpd, dev);
+}
+
 static int genpd_dev_pm_qos_notifier(struct notifier_block *nb,
 				     unsigned long val, void *ptr)
 {
@@ -922,24 +929,6 @@ static int __init genpd_power_off_unused(void)
 }
 late_initcall(genpd_power_off_unused);
 
-#if defined(CONFIG_PM_SLEEP) || defined(CONFIG_PM_GENERIC_DOMAINS_OF)
-
-static bool genpd_present(const struct generic_pm_domain *genpd)
-{
-	const struct generic_pm_domain *gpd;
-
-	if (IS_ERR_OR_NULL(genpd))
-		return false;
-
-	list_for_each_entry(gpd, &gpd_list, gpd_list_node)
-		if (gpd == genpd)
-			return true;
-
-	return false;
-}
-
-#endif
-
 #ifdef CONFIG_PM_SLEEP
 
 /**
@@ -1354,8 +1343,8 @@ static void genpd_syscore_switch(struct device *dev, bool suspend)
 {
 	struct generic_pm_domain *genpd;
 
-	genpd = dev_to_genpd(dev);
+	genpd = dev_to_genpd_safe(dev);
-	if (!genpd_present(genpd))
+	if (!genpd)
 		return;
 
 	if (suspend) {
@@ -1805,6 +1794,7 @@ int pm_genpd_init(struct generic_pm_domain *genpd,
 	genpd->domain.ops.poweroff_noirq = genpd_poweroff_noirq;
 	genpd->domain.ops.restore_noirq = genpd_restore_noirq;
 	genpd->domain.ops.complete = genpd_complete;
+	genpd->domain.start = genpd_dev_pm_start;
 
 	if (genpd->flags & GENPD_FLAG_PM_CLK) {
 		genpd->dev_ops.stop = pm_clk_suspend;
@@ -2020,6 +2010,16 @@ static int genpd_add_provider(struct device_node *np, genpd_xlate_t xlate,
 	return 0;
 }
 
+static bool genpd_present(const struct generic_pm_domain *genpd)
+{
+	const struct generic_pm_domain *gpd;
+
+	list_for_each_entry(gpd, &gpd_list, gpd_list_node)
+		if (gpd == genpd)
+			return true;
+	return false;
+}
+
 /**
  * of_genpd_add_provider_simple() - Register a simple PM domain provider
  * @np: Device node pointer associated with the PM domain provider.

drivers/base/power/power.h

@@ -117,6 +117,13 @@ static inline bool device_pm_initialized(struct device *dev)
 	return dev->power.in_dpm_list;
 }
 
+/* drivers/base/power/wakeup_stats.c */
+extern int wakeup_source_sysfs_add(struct device *parent,
+				   struct wakeup_source *ws);
+extern void wakeup_source_sysfs_remove(struct wakeup_source *ws);
+
+extern int pm_wakeup_source_sysfs_add(struct device *parent);
+
 #else /* !CONFIG_PM_SLEEP */
 
 static inline void device_pm_sleep_init(struct device *dev) {}
@@ -141,6 +148,11 @@ static inline bool device_pm_initialized(struct device *dev)
 	return device_is_registered(dev);
 }
 
+static inline int pm_wakeup_source_sysfs_add(struct device *parent)
+{
+	return 0;
+}
+
 #endif /* !CONFIG_PM_SLEEP */
 
 static inline void device_pm_init(struct device *dev)
@@ -149,21 +161,3 @@ static inline void device_pm_init(struct device *dev)
 	device_pm_sleep_init(dev);
 	pm_runtime_init(dev);
 }
-
-#ifdef CONFIG_PM_SLEEP
-
-/* drivers/base/power/wakeup_stats.c */
-extern int wakeup_source_sysfs_add(struct device *parent,
-				   struct wakeup_source *ws);
-extern void wakeup_source_sysfs_remove(struct wakeup_source *ws);
-
-extern int pm_wakeup_source_sysfs_add(struct device *parent);
-
-#else /* !CONFIG_PM_SLEEP */
-
-static inline int pm_wakeup_source_sysfs_add(struct device *parent)
-{
-	return 0;
-}
-
-#endif /* CONFIG_PM_SLEEP */

drivers/base/power/wakeirq.c

@@ -272,7 +272,7 @@ void dev_pm_enable_wake_irq_check(struct device *dev,
 {
 	struct wake_irq *wirq = dev->power.wakeirq;
 
-	if (!wirq || !((wirq->status & WAKE_IRQ_DEDICATED_MASK)))
+	if (!wirq || !(wirq->status & WAKE_IRQ_DEDICATED_MASK))
 		return;
 
 	if (likely(wirq->status & WAKE_IRQ_DEDICATED_MANAGED)) {
@@ -299,7 +299,7 @@ void dev_pm_disable_wake_irq_check(struct device *dev)
 {
 	struct wake_irq *wirq = dev->power.wakeirq;
 
-	if (!wirq || !((wirq->status & WAKE_IRQ_DEDICATED_MASK)))
+	if (!wirq || !(wirq->status & WAKE_IRQ_DEDICATED_MASK))
 		return;
 
 	if (wirq->status & WAKE_IRQ_DEDICATED_MANAGED)

drivers/mmc/host/tmio_mmc.h

@@ -163,7 +163,6 @@ struct tmio_mmc_host {
 	unsigned long		last_req_ts;
 	struct mutex		ios_lock;	/* protect set_ios() context */
 	bool			native_hotplug;
-	bool			runtime_synced;
 	bool			sdio_irq_enabled;
 
 	/* Mandatory callback */

drivers/mmc/host/tmio_mmc_core.c

@@ -39,6 +39,7 @@
 #include <linux/module.h>
 #include <linux/pagemap.h>
 #include <linux/platform_device.h>
+#include <linux/pm_domain.h>
 #include <linux/pm_qos.h>
 #include <linux/pm_runtime.h>
 #include <linux/regulator/consumer.h>
@@ -1248,10 +1249,12 @@ int tmio_mmc_host_probe(struct tmio_mmc_host *_host)
 	/* See if we also get DMA */
 	tmio_mmc_request_dma(_host, pdata);
 
+	dev_pm_domain_start(&pdev->dev);
+	pm_runtime_get_noresume(&pdev->dev);
+	pm_runtime_set_active(&pdev->dev);
 	pm_runtime_set_autosuspend_delay(&pdev->dev, 50);
 	pm_runtime_use_autosuspend(&pdev->dev);
 	pm_runtime_enable(&pdev->dev);
-	pm_runtime_get_sync(&pdev->dev);
 
 	ret = mmc_add_host(mmc);
 	if (ret)
@@ -1333,11 +1336,6 @@ int tmio_mmc_host_runtime_resume(struct device *dev)
 {
 	struct tmio_mmc_host *host = dev_get_drvdata(dev);
 
-	if (!host->runtime_synced) {
-		host->runtime_synced = true;
-		return 0;
-	}
-
 	tmio_mmc_clk_enable(host);
 	tmio_mmc_hw_reset(host->mmc);
 

drivers/opp/core.c

@@ -2102,6 +2102,75 @@ put_table:
 	return r;
 }
 
+/**
+ * dev_pm_opp_adjust_voltage() - helper to change the voltage of an OPP
+ * @dev:		device for which we do this operation
+ * @freq:		OPP frequency to adjust voltage of
+ * @u_volt:		new OPP target voltage
+ * @u_volt_min:		new OPP min voltage
+ * @u_volt_max:		new OPP max voltage
+ *
+ * Return: -EINVAL for bad pointers, -ENOMEM if no memory available for the
+ * copy operation, returns 0 if no modifcation was done OR modification was
+ * successful.
+ */
+int dev_pm_opp_adjust_voltage(struct device *dev, unsigned long freq,
+			      unsigned long u_volt, unsigned long u_volt_min,
+			      unsigned long u_volt_max)
+
+{
+	struct opp_table *opp_table;
+	struct dev_pm_opp *tmp_opp, *opp = ERR_PTR(-ENODEV);
+	int r = 0;
+
+	/* Find the opp_table */
+	opp_table = _find_opp_table(dev);
+	if (IS_ERR(opp_table)) {
+		r = PTR_ERR(opp_table);
+		dev_warn(dev, "%s: Device OPP not found (%d)\n", __func__, r);
+		return r;
+	}
+
+	mutex_lock(&opp_table->lock);
+
+	/* Do we have the frequency? */
+	list_for_each_entry(tmp_opp, &opp_table->opp_list, node) {
+		if (tmp_opp->rate == freq) {
+			opp = tmp_opp;
+			break;
+		}
+	}
+
+	if (IS_ERR(opp)) {
+		r = PTR_ERR(opp);
+		goto adjust_unlock;
+	}
+
+	/* Is update really needed? */
+	if (opp->supplies->u_volt == u_volt)
+		goto adjust_unlock;
+
+	opp->supplies->u_volt = u_volt;
+	opp->supplies->u_volt_min = u_volt_min;
+	opp->supplies->u_volt_max = u_volt_max;
+
+	dev_pm_opp_get(opp);
+	mutex_unlock(&opp_table->lock);
+
+	/* Notify the voltage change of the OPP */
+	blocking_notifier_call_chain(&opp_table->head, OPP_EVENT_ADJUST_VOLTAGE,
+				     opp);
+
+	dev_pm_opp_put(opp);
+	goto adjust_put_table;
+
+adjust_unlock:
+	mutex_unlock(&opp_table->lock);
+adjust_put_table:
+	dev_pm_opp_put_opp_table(opp_table);
+	return r;
+}
+
 /**
  * dev_pm_opp_enable() - Enable a specific OPP
  * @dev:	device for which we do this operation

drivers/powercap/intel_rapl_common.c

@@ -978,6 +978,8 @@ static const struct x86_cpu_id rapl_ids[] __initconst = {
 	INTEL_CPU_FAM6(ICELAKE_NNPI, rapl_defaults_core),
 	INTEL_CPU_FAM6(ICELAKE_X, rapl_defaults_hsw_server),
 	INTEL_CPU_FAM6(ICELAKE_D, rapl_defaults_hsw_server),
+	INTEL_CPU_FAM6(COMETLAKE_L, rapl_defaults_core),
+	INTEL_CPU_FAM6(COMETLAKE, rapl_defaults_core),
 
 	INTEL_CPU_FAM6(ATOM_SILVERMONT, rapl_defaults_byt),
 	INTEL_CPU_FAM6(ATOM_AIRMONT, rapl_defaults_cht),

include/linux/pm.h

@@ -637,6 +637,7 @@ extern void dev_pm_put_subsys_data(struct device *dev);
  * struct dev_pm_domain - power management domain representation.
  *
  * @ops: Power management operations associated with this domain.
+ * @start: Called when a user needs to start the device via the domain.
  * @detach: Called when removing a device from the domain.
  * @activate: Called before executing probe routines for bus types and drivers.
  * @sync: Called after successful driver probe.
@@ -648,6 +649,7 @@ extern void dev_pm_put_subsys_data(struct device *dev);
  */
 struct dev_pm_domain {
 	struct dev_pm_ops	ops;
+	int (*start)(struct device *dev);
 	void (*detach)(struct device *dev, bool power_off);
 	int (*activate)(struct device *dev);
 	void (*sync)(struct device *dev);

include/linux/pm_domain.h

@@ -366,6 +366,7 @@ struct device *dev_pm_domain_attach_by_id(struct device *dev,
 struct device *dev_pm_domain_attach_by_name(struct device *dev,
 					    const char *name);
 void dev_pm_domain_detach(struct device *dev, bool power_off);
+int dev_pm_domain_start(struct device *dev);
 void dev_pm_domain_set(struct device *dev, struct dev_pm_domain *pd);
 #else
 static inline int dev_pm_domain_attach(struct device *dev, bool power_on)
@@ -383,6 +384,10 @@ static inline struct device *dev_pm_domain_attach_by_name(struct device *dev,
 	return NULL;
 }
 static inline void dev_pm_domain_detach(struct device *dev, bool power_off) {}
+static inline int dev_pm_domain_start(struct device *dev)
+{
+	return 0;
+}
 static inline void dev_pm_domain_set(struct device *dev,
 				     struct dev_pm_domain *pd) {}
 #endif

include/linux/pm_opp.h

@@ -22,6 +22,7 @@ struct opp_table;
 
 enum dev_pm_opp_event {
 	OPP_EVENT_ADD, OPP_EVENT_REMOVE, OPP_EVENT_ENABLE, OPP_EVENT_DISABLE,
+	OPP_EVENT_ADJUST_VOLTAGE,
 };
 
 /**
@@ -113,6 +114,10 @@ int dev_pm_opp_add(struct device *dev, unsigned long freq,
 void dev_pm_opp_remove(struct device *dev, unsigned long freq);
 void dev_pm_opp_remove_all_dynamic(struct device *dev);
 
+int dev_pm_opp_adjust_voltage(struct device *dev, unsigned long freq,
+			      unsigned long u_volt, unsigned long u_volt_min,
+			      unsigned long u_volt_max);
+
 int dev_pm_opp_enable(struct device *dev, unsigned long freq);
 
 int dev_pm_opp_disable(struct device *dev, unsigned long freq);
@@ -242,6 +247,14 @@ static inline void dev_pm_opp_remove_all_dynamic(struct device *dev)
 {
 }
 
+static inline int
+dev_pm_opp_adjust_voltage(struct device *dev, unsigned long freq,
+			  unsigned long u_volt, unsigned long u_volt_min,
+			  unsigned long u_volt_max)
+{
+	return 0;
+}
+
 static inline int dev_pm_opp_enable(struct device *dev, unsigned long freq)
 {
 	return 0;

kernel/power/snapshot.c

@@ -734,8 +734,15 @@ zone_found:
 	 * We have found the zone. Now walk the radix tree to find the leaf node
 	 * for our PFN.
 	 */
+
+	/*
+	 * If the zone we wish to scan is the the current zone and the
+	 * pfn falls into the current node then we do not need to walk
+	 * the tree.
+	 */
 	node = bm->cur.node;
-	if (((pfn - zone->start_pfn) & ~BM_BLOCK_MASK) == bm->cur.node_pfn)
+	if (zone == bm->cur.zone &&
+	    ((pfn - zone->start_pfn) & ~BM_BLOCK_MASK) == bm->cur.node_pfn)
 		goto node_found;
 
 	node      = zone->rtree;