leandrof/linux
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Qualcomm Device Tree Changes for v4.20

Browse Source 
* Fix IRQ constants usage on MSM8974
 * Add led, gpio-button, sdcc, and pcie nodes for IPQ8064
 * Move/cleanup common nodes for IPQ8064
 * Add i2c sensor nodes for MSM8974 Hammerhead
 * Fixes for SAW, kpss, opp, pci range, and space/tab on IPQ4019
 * Update coresight bindings
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJbsROJAAoJEFKiBbHx2RXVgeoQAME0KidGF3FQsr/IjUD423bz
 lUQIXwpuHFz9D/MHqfyvZTfX9unqCV5fn8hPH86Q3ozUqZTRR9fVruVwKRgi4nkp
 T6fZsyB4KZrvENyHrcs9Pn1j3yKSGKTu8OcZOvOzTDotFAhy+YE9emzY+8WNFnDU
 CfGpghwMj3DsuTEhk/C+N/MWMMrKITNMzxVK7f7LALr9LCzrxNITu5+hZmD8bJDT
 P31/XnVoh3FXpue6AkYFRa8KT5VlFy4kOCMh/Uouhk2ONlPptASV1rnuZSYyfAHg
 NhtBYQMMyi/6dsoj3JDMz2p3HmIjZPPxbWoM98jqGPcDDOeEsvR1DCQGVM0C85x+
 DWM3TBo5J0EocPzBfr4MHKcbZkOxm7xyWDKPnZfWLFu5KxgcytYbQXQPTJH1zheL
 khZA0ghoZ6enH+k17knPgHNxgEfFe2sZJg6FW88kMwNZyEZ3OPoIndXqjdwshc4a
 jEhMdiTrlM8X7IEqBS0akErVYi0uDxcD3K7IqavEjWn3GwTcw3TDNdp1ViIC7ldS
 Q6n9cK4V+aQ2h2gFMgKMijqbZ87Dhi2u9D1ltwxhaXDlMFTufDo+8sFD0tM9g0O6
 0XlYKxBogXavL9f/23gUm2pyBjITVpRpeRlbyQh0KU24IFz9Y2BWYqBwnqBLK1D+
 XwWKeLlV9b7ZJP5NvtIp
 =74RU
 -----END PGP SIGNATURE-----

Merge tag 'qcom-dts-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt

Qualcomm Device Tree Changes for v4.20

* Fix IRQ constants usage on MSM8974
* Add led, gpio-button, sdcc, and pcie nodes for IPQ8064
* Move/cleanup common nodes for IPQ8064
* Add i2c sensor nodes for MSM8974 Hammerhead
* Fixes for SAW, kpss, opp, pci range, and space/tab on IPQ4019
* Update coresight bindings

* tag 'qcom-dts-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
  ARM: dts: qcom: Update coresight bindings for hardware ports
  ARM: dts: qcom-msm8974: change invalid flag IRQ NONE to valid value
  ARM: dts: qcom: ipq4019: fix space vs tab indenting inside qcom-ipq4019.dtsi
  ARM: dts: qcom: ipq4019: fix PCI range
  ARM: dts: qcom: ipq4019: fix cpu0's qcom,saw2 reg value
  ARM: dts: qcom: ipq4019: add cpu operating points for cpufreq support
  ARM: dts: qcom: ipq4019: use v2 of the kpss bringup mechanism
  ARM: dts: qcom: msm8974-hammerhead: add device tree bindings for ALS / proximity
  ARM: dts: qcom: msm8974-hammerhead: add device tree bindings for mpu6515
  ARM: dts: qcom: Add led and gpio-button nodes to ipq8064 boards
  ARM: dts: qcom: Move common nodes to ipq8064-v.1.0.dtsi
  ARM: dts: qcom: Add sdcc nodes for ipq8064
  ARM: dts: qcom: Add pcie nodes for ipq8064
  ARM: dts: qcom-msm8974: change invalid flag IRQ NONE to valid value
  ARM: dts: qcom-msm8974: use named constant for interrupt flag NONE
  ARM: dts: qcom-msm8974: use named constant for interrupt flag LEVEL HIGH
  ARM: dts: qcom-msm8974: use named constant for interrupt flag EDGE RISING
  ARM: dts: qcom-msm8974: use named constant for interrupt type GIC_SPI
  ARM: dts: qcom-msm8974: use named constant for interrupt type GIC_PPI

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This commit is contained in:
Arnd Bergmann 2018-10-02 11:32:10 +02:00
commit 55dc97235b
7 changed files with 731 additions and 258 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

71
arch/arm/boot/dts/qcom-apq8064.dtsi
View File

@ -1611,10 +1611,11 @@
clocks = <&rpmcc RPM_QDSS_CLK>;
clock-names = "apb_pclk";
port {
etb_in: endpoint {
slave-mode;
remote-endpoint = <&replicator_out0>;
in-ports {
port {
etb_in: endpoint {
remote-endpoint = <&replicator_out0>;
};
};
};
};
@ -1626,10 +1627,11 @@
clocks = <&rpmcc RPM_QDSS_CLK>;
clock-names = "apb_pclk";
port {
tpiu_in: endpoint {
slave-mode;
remote-endpoint = <&replicator_out1>;
in-ports {
port {
tpiu_in: endpoint {
remote-endpoint = <&replicator_out1>;
};
};
};
};
@ -1640,7 +1642,7 @@
clocks = <&rpmcc RPM_QDSS_CLK>;
clock-names = "apb_pclk";
ports {
out-ports {
#address-cells = <1>;
#size-cells = <0>;
@ -1656,10 +1658,11 @@
remote-endpoint = <&tpiu_in>;
};
};
port@2 {
reg = <0>;
};
in-ports {
port {
replicator_in: endpoint {
slave-mode;
remote-endpoint = <&funnel_out>;
};
};
@ -1673,7 +1676,7 @@
clocks = <&rpmcc RPM_QDSS_CLK>;
clock-names = "apb_pclk";
ports {
in-ports {
#address-cells = <1>;
#size-cells = <0>;
@ -1687,33 +1690,31 @@
port@0 {
reg = <0>;
funnel_in0: endpoint {
slave-mode;
remote-endpoint = <&etm0_out>;
};
};
port@1 {
reg = <1>;
funnel_in1: endpoint {
slave-mode;
remote-endpoint = <&etm1_out>;
};
};
port@4 {
reg = <4>;
funnel_in4: endpoint {
slave-mode;
remote-endpoint = <&etm2_out>;
};
};
port@5 {
reg = <5>;
funnel_in5: endpoint {
slave-mode;
remote-endpoint = <&etm3_out>;
};
};
port@8 {
reg = <0>;
};
out-ports {
port {
funnel_out: endpoint {
remote-endpoint = <&replicator_in>;
};
@ -1730,9 +1731,11 @@
cpu = <&CPU0>;
port {
etm0_out: endpoint {
remote-endpoint = <&funnel_in0>;
out-ports {
port {
etm0_out: endpoint {
remote-endpoint = <&funnel_in0>;
};
};
};
};
@ -1746,9 +1749,11 @@
cpu = <&CPU1>;
port {
etm1_out: endpoint {
remote-endpoint = <&funnel_in1>;
out-ports {
port {
etm1_out: endpoint {
remote-endpoint = <&funnel_in1>;
};
};
};
};
@ -1762,9 +1767,11 @@
cpu = <&CPU2>;
port {
etm2_out: endpoint {
remote-endpoint = <&funnel_in4>;
out-ports {
port {
etm2_out: endpoint {
remote-endpoint = <&funnel_in4>;
};
};
};
};
@ -1778,9 +1785,11 @@
cpu = <&CPU3>;
port {
etm3_out: endpoint {
remote-endpoint = <&funnel_in5>;
out-ports {
port {
etm3_out: endpoint {
remote-endpoint = <&funnel_in5>;
};
};
};
};

143
arch/arm/boot/dts/qcom-ipq4019.dtsi
View File

@ -52,78 +52,85 @@
cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a7";
enable-method = "qcom,kpss-acc-v1";
enable-method = "qcom,kpss-acc-v2";
next-level-cache = <&L2>;
qcom,acc = <&acc0>;
qcom,saw = <&saw0>;
reg = <0x0>;
clocks = <&gcc GCC_APPS_CLK_SRC>;
clock-frequency = <0>;
operating-points = <
/* kHz uV (fixed) */
48000 1100000
200000 1100000
500000 1100000
716000 1100000
>;
clock-latency = <256000>;
operating-points-v2 = <&cpu0_opp_table>;
};
cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a7";
enable-method = "qcom,kpss-acc-v1";
enable-method = "qcom,kpss-acc-v2";
next-level-cache = <&L2>;
qcom,acc = <&acc1>;
qcom,saw = <&saw1>;
reg = <0x1>;
clocks = <&gcc GCC_APPS_CLK_SRC>;
clock-frequency = <0>;
operating-points = <
/* kHz uV (fixed) */
48000 1100000
200000 1100000
500000 1100000
666000 1100000
>;
clock-latency = <256000>;
operating-points-v2 = <&cpu0_opp_table>;
};
cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a7";
enable-method = "qcom,kpss-acc-v1";
enable-method = "qcom,kpss-acc-v2";
next-level-cache = <&L2>;
qcom,acc = <&acc2>;
qcom,saw = <&saw2>;
reg = <0x2>;
clocks = <&gcc GCC_APPS_CLK_SRC>;
clock-frequency = <0>;
operating-points = <
/* kHz uV (fixed) */
48000 1100000
200000 1100000
500000 1100000
666000 1100000
>;
clock-latency = <256000>;
operating-points-v2 = <&cpu0_opp_table>;
};
cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a7";
enable-method = "qcom,kpss-acc-v1";
enable-method = "qcom,kpss-acc-v2";
next-level-cache = <&L2>;
qcom,acc = <&acc3>;
qcom,saw = <&saw3>;
reg = <0x3>;
clocks = <&gcc GCC_APPS_CLK_SRC>;
clock-frequency = <0>;
operating-points = <
/* kHz uV (fixed) */
48000 1100000
200000 1100000
500000 1100000
666000 1100000
>;
clock-latency = <256000>;
operating-points-v2 = <&cpu0_opp_table>;
};
L2: l2-cache {
compatible = "cache";
cache-level = <2>;
};
};
cpu0_opp_table: opp_table0 {
compatible = "operating-points-v2";
opp-shared;
opp-48000000 {
opp-hz = /bits/ 64 <48000000>;
clock-latency-ns = <256000>;
};
opp-200000000 {
opp-hz = /bits/ 64 <200000000>;
clock-latency-ns = <256000>;
};
opp-500000000 {
opp-hz = /bits/ 64 <500000000>;
clock-latency-ns = <256000>;
};
opp-716000000 {
opp-hz = /bits/ 64 <716000000>;
clock-latency-ns = <256000>;
};
};
pmu {
@ -291,49 +298,49 @@
status = "disabled";
};
acc0: clock-controller@b088000 {
compatible = "qcom,kpss-acc-v1";
reg = <0x0b088000 0x1000>, <0xb008000 0x1000>;
};
acc0: clock-controller@b088000 {
compatible = "qcom,kpss-acc-v2";
reg = <0x0b088000 0x1000>, <0xb008000 0x1000>;
};
acc1: clock-controller@b098000 {
compatible = "qcom,kpss-acc-v1";
reg = <0x0b098000 0x1000>, <0xb008000 0x1000>;
};
acc1: clock-controller@b098000 {
compatible = "qcom,kpss-acc-v2";
reg = <0x0b098000 0x1000>, <0xb008000 0x1000>;
};
acc2: clock-controller@b0a8000 {
compatible = "qcom,kpss-acc-v1";
reg = <0x0b0a8000 0x1000>, <0xb008000 0x1000>;
};
acc2: clock-controller@b0a8000 {
compatible = "qcom,kpss-acc-v2";
reg = <0x0b0a8000 0x1000>, <0xb008000 0x1000>;
};
acc3: clock-controller@b0b8000 {
compatible = "qcom,kpss-acc-v1";
reg = <0x0b0b8000 0x1000>, <0xb008000 0x1000>;
};
acc3: clock-controller@b0b8000 {
compatible = "qcom,kpss-acc-v2";
reg = <0x0b0b8000 0x1000>, <0xb008000 0x1000>;
};
saw0: regulator@b089000 {
compatible = "qcom,saw2";
reg = <0x02089000 0x1000>, <0x0b009000 0x1000>;
saw0: regulator@b089000 {
compatible = "qcom,saw2";
reg = <0x0b089000 0x1000>, <0x0b009000 0x1000>;
regulator;
};
};
saw1: regulator@b099000 {
compatible = "qcom,saw2";
reg = <0x0b099000 0x1000>, <0x0b009000 0x1000>;
regulator;
};
saw1: regulator@b099000 {
compatible = "qcom,saw2";
reg = <0x0b099000 0x1000>, <0x0b009000 0x1000>;
regulator;
};
saw2: regulator@b0a9000 {
compatible = "qcom,saw2";
reg = <0x0b0a9000 0x1000>, <0x0b009000 0x1000>;
regulator;
};
saw2: regulator@b0a9000 {
compatible = "qcom,saw2";
reg = <0x0b0a9000 0x1000>, <0x0b009000 0x1000>;
regulator;
};
saw3: regulator@b0b9000 {
compatible = "qcom,saw2";
reg = <0x0b0b9000 0x1000>, <0x0b009000 0x1000>;
regulator;
};
saw3: regulator@b0b9000 {
compatible = "qcom,saw2";
reg = <0x0b0b9000 0x1000>, <0x0b009000 0x1000>;
regulator;
};
blsp1_uart1: serial@78af000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
@ -387,7 +394,7 @@
#size-cells = <2>;
ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000
0x82000000 0 0x48000000 0x48000000 0 0x10000000>;
0x82000000 0 0x40300000 0x40300000 0 0x400000>;
interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "msi";

83
arch/arm/boot/dts/qcom-ipq8064-ap148.dts
View File

@ -2,26 +2,8 @@
#include "qcom-ipq8064-v1.0.dtsi"
/ {
model = "Qualcomm IPQ8064/AP148";
compatible = "qcom,ipq8064-ap148", "qcom,ipq8064";
aliases {
serial0 = &gsbi4_serial;
};
chosen {
stdout-path = "serial0:115200n8";
};
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
rsvd@41200000 {
reg = <0x41200000 0x300000>;
no-map;
};
};
model = "Qualcomm Technologies, Inc. IPQ8064/AP-148";
compatible = "qcom,ipq8064-ap148";
soc {
pinmux@800000 {
@ -31,73 +13,22 @@
bias-disable;
};
spi_pins: spi_pins {
buttons_pins: buttons_pins {
mux {
pins = "gpio18", "gpio19", "gpio21";
function = "gsbi5";
drive-strength = <10>;
bias-none;
pins = "gpio54", "gpio65";
drive-strength = <2>;
bias-pull-up;
};
};
};
gsbi@16300000 {
qcom,mode = <GSBI_PROT_I2C_UART>;
status = "ok";
serial@16340000 {
i2c@16380000 {
status = "ok";
};
i2c4: i2c@16380000 {
status = "ok";
clock-frequency = <200000>;
pinctrl-0 = <&i2c4_pins>;
pinctrl-names = "default";
};
};
gsbi5: gsbi@1a200000 {
qcom,mode = <GSBI_PROT_SPI>;
status = "ok";
spi4: spi@1a280000 {
status = "ok";
spi-max-frequency = <50000000>;
pinctrl-0 = <&spi_pins>;
pinctrl-names = "default";
cs-gpios = <&qcom_pinmux 20 0>;
flash: m25p80@0 {
compatible = "s25fl256s1";
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <50000000>;
reg = <0>;
partition@0 {
label = "rootfs";
reg = <0x0 0x1000000>;
};
partition@1 {
label = "scratch";
reg = <0x1000000 0x1000000>;
};
};
};
};
sata-phy@1b400000 {
status = "ok";
};
sata@29000000 {
ports-implemented = <0x1>;
status = "ok";
};
};
};

125
arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
View File

@ -1,2 +1,127 @@
// SPDX-License-Identifier: GPL-2.0
#include "qcom-ipq8064.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "Qualcomm Technologies, Inc. IPQ8064-v1.0";
aliases {
serial0 = &gsbi4_serial;
};
chosen {
stdout-path = "serial0:115200n8";
};
soc {
gsbi@16300000 {
qcom,mode = <GSBI_PROT_I2C_UART>;
status = "ok";
serial@16340000 {
status = "ok";
};
};
gsbi5: gsbi@1a200000 {
qcom,mode = <GSBI_PROT_SPI>;
status = "ok";
spi4: spi@1a280000 {
status = "ok";
spi-max-frequency = <50000000>;
pinctrl-0 = <&spi_pins>;
pinctrl-names = "default";
cs-gpios = <&qcom_pinmux 20 0>;
flash: m25p80@0 {
compatible = "s25fl256s1";
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <50000000>;
reg = <0>;
partition@0 {
label = "rootfs";
reg = <0x0 0x1000000>;
};
partition@1 {
label = "scratch";
reg = <0x1000000 0x1000000>;
};
};
};
};
sata-phy@1b400000 {
status = "ok";
};
sata@29000000 {
ports-implemented = <0x1>;
status = "ok";
};
gpio_keys {
compatible = "gpio-keys";
pinctrl-0 = <&buttons_pins>;
pinctrl-names = "default";
button@1 {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
debounce-interval = <60>;
};
button@2 {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
pinctrl-0 = <&leds_pins>;
pinctrl-names = "default";
led@7 {
label = "led_usb1";
gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "usbdev";
default-state = "off";
};
led@8 {
label = "led_usb3";
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "usbdev";
default-state = "off";
};
led@9 {
label = "status_led_fail";
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
led@26 {
label = "sata_led";
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
led@53 {
label = "status_led_pass";
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
};
};
};

286
arch/arm/boot/dts/qcom-ipq8064.dtsi
View File

@ -2,8 +2,11 @@
/dts-v1/;
#include "skeleton.dtsi"
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-ipq806x.h>
#include <dt-bindings/clock/qcom,lcc-ipq806x.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/reset/qcom,gcc-ipq806x.h>
#include <dt-bindings/soc/qcom,gsbi.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
@ -114,6 +117,61 @@
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
pcie0_pins: pcie0_pinmux {
mux {
pins = "gpio3";
function = "pcie1_rst";
drive-strength = <12>;
bias-disable;
};
};
pcie1_pins: pcie1_pinmux {
mux {
pins = "gpio48";
function = "pcie2_rst";
drive-strength = <12>;
bias-disable;
};
};
pcie2_pins: pcie2_pinmux {
mux {
pins = "gpio63";
function = "pcie3_rst";
drive-strength = <12>;
bias-disable;
};
};
spi_pins: spi_pins {
mux {
pins = "gpio18", "gpio19", "gpio21";
function = "gsbi5";
drive-strength = <10>;
bias-none;
};
};
leds_pins: leds_pins {
mux {
pins = "gpio7", "gpio8", "gpio9",
"gpio26", "gpio53";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
output-low;
};
};
buttons_pins: buttons_pins {
mux {
pins = "gpio54";
drive-strength = <2>;
bias-pull-up;
};
};
};
intc: interrupt-controller@2000000 {
@ -373,5 +431,233 @@
#reset-cells = <1>;
};
pcie0: pci@1b500000 {
compatible = "qcom,pcie-ipq8064";
reg = <0x1b500000 0x1000
0x1b502000 0x80
0x1b600000 0x100
0x0ff00000 0x100000>;
reg-names = "dbi", "elbi", "parf", "config";
device_type = "pci";
linux,pci-domain = <0>;
bus-range = <0x00 0xff>;
num-lanes = <1>;
#address-cells = <3>;
#size-cells = <2>;
ranges = <0x81000000 0 0x0fe00000 0x0fe00000 0 0x00100000 /* downstream I/O */
0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* non-prefetchable memory */
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
<0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
<0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
<0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
clocks = <&gcc PCIE_A_CLK>,
<&gcc PCIE_H_CLK>,
<&gcc PCIE_PHY_CLK>,
<&gcc PCIE_AUX_CLK>,
<&gcc PCIE_ALT_REF_CLK>;
clock-names = "core", "iface", "phy", "aux", "ref";
assigned-clocks = <&gcc PCIE_ALT_REF_CLK>;
assigned-clock-rates = <100000000>;
resets = <&gcc PCIE_ACLK_RESET>,
<&gcc PCIE_HCLK_RESET>,
<&gcc PCIE_POR_RESET>,
<&gcc PCIE_PCI_RESET>,
<&gcc PCIE_PHY_RESET>,
<&gcc PCIE_EXT_RESET>;
reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
pinctrl-0 = <&pcie0_pins>;
pinctrl-names = "default";
status = "disabled";
perst-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
};
pcie1: pci@1b700000 {
compatible = "qcom,pcie-ipq8064";
reg = <0x1b700000 0x1000
0x1b702000 0x80
0x1b800000 0x100
0x31f00000 0x100000>;
reg-names = "dbi", "elbi", "parf", "config";
device_type = "pci";
linux,pci-domain = <1>;
bus-range = <0x00 0xff>;
num-lanes = <1>;
#address-cells = <3>;
#size-cells = <2>;
ranges = <0x81000000 0 0x31e00000 0x31e00000 0 0x00100000 /* downstream I/O */
0x82000000 0 0x2e000000 0x2e000000 0 0x03e00000>; /* non-prefetchable memory */
interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc 0 58 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
<0 0 0 2 &intc 0 59 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
<0 0 0 3 &intc 0 60 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
<0 0 0 4 &intc 0 61 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
clocks = <&gcc PCIE_1_A_CLK>,
<&gcc PCIE_1_H_CLK>,
<&gcc PCIE_1_PHY_CLK>,
<&gcc PCIE_1_AUX_CLK>,
<&gcc PCIE_1_ALT_REF_CLK>;
clock-names = "core", "iface", "phy", "aux", "ref";
assigned-clocks = <&gcc PCIE_1_ALT_REF_CLK>;
assigned-clock-rates = <100000000>;
resets = <&gcc PCIE_1_ACLK_RESET>,
<&gcc PCIE_1_HCLK_RESET>,
<&gcc PCIE_1_POR_RESET>,
<&gcc PCIE_1_PCI_RESET>,
<&gcc PCIE_1_PHY_RESET>,
<&gcc PCIE_1_EXT_RESET>;
reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
pinctrl-0 = <&pcie1_pins>;
pinctrl-names = "default";
status = "disabled";
perst-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
};
pcie2: pci@1b900000 {
compatible = "qcom,pcie-ipq8064";
reg = <0x1b900000 0x1000
0x1b902000 0x80
0x1ba00000 0x100
0x35f00000 0x100000>;
reg-names = "dbi", "elbi", "parf", "config";
device_type = "pci";
linux,pci-domain = <2>;
bus-range = <0x00 0xff>;
num-lanes = <1>;
#address-cells = <3>;
#size-cells = <2>;
ranges = <0x81000000 0 0x35e00000 0x35e00000 0 0x00100000 /* downstream I/O */
0x82000000 0 0x32000000 0x32000000 0 0x03e00000>; /* non-prefetchable memory */
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc 0 72 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
<0 0 0 2 &intc 0 73 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
<0 0 0 3 &intc 0 74 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
<0 0 0 4 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
clocks = <&gcc PCIE_2_A_CLK>,
<&gcc PCIE_2_H_CLK>,
<&gcc PCIE_2_PHY_CLK>,
<&gcc PCIE_2_AUX_CLK>,
<&gcc PCIE_2_ALT_REF_CLK>;
clock-names = "core", "iface", "phy", "aux", "ref";
assigned-clocks = <&gcc PCIE_2_ALT_REF_CLK>;
assigned-clock-rates = <100000000>;
resets = <&gcc PCIE_2_ACLK_RESET>,
<&gcc PCIE_2_HCLK_RESET>,
<&gcc PCIE_2_POR_RESET>,
<&gcc PCIE_2_PCI_RESET>,
<&gcc PCIE_2_PHY_RESET>,
<&gcc PCIE_2_EXT_RESET>;
reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
pinctrl-0 = <&pcie2_pins>;
pinctrl-names = "default";
status = "disabled";
perst-gpio = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>;
};
vsdcc_fixed: vsdcc-regulator {
compatible = "regulator-fixed";
regulator-name = "SDCC Power";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
sdcc1bam:dma@12402000 {
compatible = "qcom,bam-v1.3.0";
reg = <0x12402000 0x8000>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc SDC1_H_CLK>;
clock-names = "bam_clk";
#dma-cells = <1>;
qcom,ee = <0>;
};
sdcc3bam:dma@12182000 {
compatible = "qcom,bam-v1.3.0";
reg = <0x12182000 0x8000>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc SDC3_H_CLK>;
clock-names = "bam_clk";
#dma-cells = <1>;
qcom,ee = <0>;
};
amba {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
sdcc@12400000 {
status = "disabled";
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
reg = <0x12400000 0x2000>;
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cmd_irq";
clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
clock-names = "mclk", "apb_pclk";
bus-width = <8>;
max-frequency = <96000000>;
non-removable;
cap-sd-highspeed;
cap-mmc-highspeed;
mmc-ddr-1_8v;
vmmc-supply = <&vsdcc_fixed>;
dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
dma-names = "tx", "rx";
};
sdcc@12180000 {
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
status = "disabled";
reg = <0x12180000 0x2000>;
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cmd_irq";
clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
clock-names = "mclk", "apb_pclk";
bus-width = <8>;
cap-sd-highspeed;
cap-mmc-highspeed;
max-frequency = <192000000>;
#mmc-ddr-1_8v;
sd-uhs-sdr104;
sd-uhs-ddr50;
vqmmc-supply = <&vsdcc_fixed>;
dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
dma-names = "tx", "rx";
};
};
};
};

83
arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
View File

@ -241,6 +241,33 @@
bias-pull-up;
};
};
i2c3_pins: i2c3 {
mux {
pins = "gpio10", "gpio11";
function = "blsp_i2c3";
drive-strength = <2>;
bias-disable;
};
};
i2c12_pins: i2c12 {
mux {
pins = "gpio87", "gpio88";
function = "blsp_i2c12";
drive-strength = <2>;
bias-disable;
};
};
mpu6515_pin: mpu6515 {
irq {
pins = "gpio73";
function = "gpio";
bias-disable;
input-enable;
};
};
};
sdhci@f9824900 {
@ -277,6 +304,62 @@
linux,code = <KEY_VOLUMEDOWN>;
};
};
i2c@f9968000 {
status = "ok";
pinctrl-names = "default";
pinctrl-0 = <&i2c12_pins>;
clock-frequency = <100000>;
qcom,src-freq = <50000000>;
mpu6515@68 {
compatible = "invensense,mpu6515";
reg = <0x68>;
interrupts-extended = <&msmgpio 73 IRQ_TYPE_EDGE_FALLING>;
vddio-supply = <&pm8941_lvs1>;
pinctrl-names = "default";
pinctrl-0 = <&mpu6515_pin>;
i2c-gate {
#address-cells = <1>;
#size-cells = <0>;
ak8963@f {
compatible = "asahi-kasei,ak8963";
reg = <0x0f>;
// Currently only works in polling mode.
// gpios = <&msmgpio 61 0>;
vid-supply = <&pm8941_lvs1>;
vdd-supply = <&pm8941_l17>;
};
bmp280@76 {
compatible = "bosch,bmp280";
reg = <0x76>;
vdda-supply = <&pm8941_lvs1>;
vddd-supply = <&pm8941_l17>;
};
};
};
};
i2c@f9925000 {
status = "ok";
pinctrl-names = "default";
pinctrl-0 = <&i2c3_pins>;
clock-frequency = <100000>;
qcom,src-freq = <50000000>;
avago_apds993@39 {
compatible = "avago,apds9930";
reg = <0x39>;
interrupts-extended = <&msmgpio 61 IRQ_TYPE_EDGE_FALLING>;
vdd-supply = <&pm8941_l17>;
vddio-supply = <&pm8941_lvs1>;
led-max-microamp = <100000>;
amstaos,proximity-diodes = <0>;
};
};
};
&spmi_bus {

198
arch/arm/boot/dts/qcom-msm8974.dtsi
View File

@ -67,7 +67,7 @@
cpus {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <1 9 0xf04>;
interrupts = <GIC_PPI 9 0xf04>;
CPU0: cpu@0 {
compatible = "qcom,krait";
@ -214,7 +214,7 @@
cpu-pmu {
compatible = "qcom,krait-pmu";
interrupts = <1 7 0xf04>;
interrupts = <GIC_PPI 7 0xf04>;
};
clocks {
@ -233,17 +233,17 @@
timer {
compatible = "arm,armv7-timer";
interrupts = <1 2 0xf08>,
<1 3 0xf08>,
<1 4 0xf08>,
<1 1 0xf08>;
interrupts = <GIC_PPI 2 0xf08>,
<GIC_PPI 3 0xf08>,
<GIC_PPI 4 0xf08>,
<GIC_PPI 1 0xf08>;
clock-frequency = <19200000>;
};
adsp-pil {
compatible = "qcom,msm8974-adsp-pil";
interrupts-extended = <&intc 0 162 IRQ_TYPE_EDGE_RISING>,
interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
<&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
<&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
<&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
@ -275,7 +275,7 @@
qcom,smem = <443>, <429>;
interrupt-parent = <&intc>;
interrupts = <0 158 IRQ_TYPE_EDGE_RISING>;
interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&apcs 8 10>;
@ -300,7 +300,7 @@
qcom,smem = <435>, <428>;
interrupt-parent = <&intc>;
interrupts = <0 27 IRQ_TYPE_EDGE_RISING>;
interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&apcs 8 14>;
@ -325,7 +325,7 @@
qcom,smem = <451>, <431>;
interrupt-parent = <&intc>;
interrupts = <0 143 IRQ_TYPE_EDGE_RISING>;
interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&apcs 8 18>;
@ -364,7 +364,7 @@
modem_smsm: modem@1 {
reg = <1>;
interrupts = <0 26 IRQ_TYPE_EDGE_RISING>;
interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
interrupt-controller;
#interrupt-cells = <2>;
@ -372,7 +372,7 @@
adsp_smsm: adsp@2 {
reg = <2>;
interrupts = <0 157 IRQ_TYPE_EDGE_RISING>;
interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>;
interrupt-controller;
#interrupt-cells = <2>;
@ -380,7 +380,7 @@
wcnss_smsm: wcnss@7 {
reg = <7>;
interrupts = <0 144 IRQ_TYPE_EDGE_RISING>;
interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
interrupt-controller;
#interrupt-cells = <2>;
@ -445,50 +445,50 @@
frame@f9021000 {
frame-number = <0>;
interrupts = <0 8 0x4>,
<0 7 0x4>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9021000 0x1000>,
<0xf9022000 0x1000>;
};
frame@f9023000 {
frame-number = <1>;
interrupts = <0 9 0x4>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9023000 0x1000>;
status = "disabled";
};
frame@f9024000 {
frame-number = <2>;
interrupts = <0 10 0x4>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9024000 0x1000>;
status = "disabled";
};
frame@f9025000 {
frame-number = <3>;
interrupts = <0 11 0x4>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9025000 0x1000>;
status = "disabled";
};
frame@f9026000 {
frame-number = <4>;
interrupts = <0 12 0x4>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9026000 0x1000>;
status = "disabled";
};
frame@f9027000 {
frame-number = <5>;
interrupts = <0 13 0x4>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9027000 0x1000>;
status = "disabled";
};
frame@f9028000 {
frame-number = <6>;
interrupts = <0 14 0x4>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9028000 0x1000>;
status = "disabled";
};
@ -586,7 +586,7 @@
blsp1_uart1: serial@f991d000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0xf991d000 0x1000>;
interrupts = <0 107 0x0>;
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
status = "disabled";
@ -595,7 +595,7 @@
blsp1_uart2: serial@f991e000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0xf991e000 0x1000>;
interrupts = <0 108 0x0>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
status = "disabled";
@ -605,7 +605,8 @@
compatible = "qcom,sdhci-msm-v4";
reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
reg-names = "hc_mem", "core_mem";
interrupts = <0 123 0>, <0 138 0>;
interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC1_APPS_CLK>,
<&gcc GCC_SDCC1_AHB_CLK>,
@ -618,8 +619,8 @@
compatible = "qcom,sdhci-msm-v4";
reg = <0xf9864900 0x11c>, <0xf9864000 0x800>;
reg-names = "hc_mem", "core_mem";
interrupts = <GIC_SPI 127 IRQ_TYPE_NONE>,
<GIC_SPI 224 IRQ_TYPE_NONE>;
interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC3_APPS_CLK>,
<&gcc GCC_SDCC3_AHB_CLK>,
@ -632,7 +633,8 @@
compatible = "qcom,sdhci-msm-v4";
reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
reg-names = "hc_mem", "core_mem";
interrupts = <0 125 0>, <0 221 0>;
interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC2_APPS_CLK>,
<&gcc GCC_SDCC2_AHB_CLK>,
@ -699,25 +701,36 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <0 208 0>;
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
};
i2c@f9924000 {
status = "disabled";
compatible = "qcom,i2c-qup-v2.1.1";
reg = <0xf9924000 0x1000>;
interrupts = <0 96 IRQ_TYPE_NONE>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
#address-cells = <1>;
#size-cells = <0>;
};
blsp_i2c3: i2c@f9925000 {
status = "disabled";
compatible = "qcom,i2c-qup-v2.1.1";
reg = <0xf9925000 0x1000>;
interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
#address-cells = <1>;
#size-cells = <0>;
};
blsp_i2c8: i2c@f9964000 {
status = "disabled";
compatible = "qcom,i2c-qup-v2.1.1";
reg = <0xf9964000 0x1000>;
interrupts = <0 102 IRQ_TYPE_NONE>;
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
#address-cells = <1>;
@ -728,7 +741,7 @@
status = "disabled";
compatible = "qcom,i2c-qup-v2.1.1";
reg = <0xf9967000 0x1000>;
interrupts = <0 105 IRQ_TYPE_NONE>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
#address-cells = <1>;
@ -737,6 +750,17 @@
dma-names = "tx", "rx";
};
blsp_i2c12: i2c@f9968000 {
status = "disabled";
compatible = "qcom,i2c-qup-v2.1.1";
reg = <0xf9968000 0x1000>;
interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
#address-cells = <1>;
#size-cells = <0>;
};
spmi_bus: spmi@fc4cf000 {
compatible = "qcom,spmi-pmic-arb";
reg-names = "core", "intr", "cnfg";
@ -744,7 +768,7 @@
<0xfc4cb000 0x1000>,
<0xfc4ca000 0x1000>;
interrupt-names = "periph_irq";
interrupts = <0 190 0>;
interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
qcom,ee = <0>;
qcom,channel = <0>;
#address-cells = <2>;
@ -770,10 +794,11 @@
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
port {
etr_in: endpoint {
slave-mode;
remote-endpoint = <&replicator_out0>;
in-ports {
port {
etr_in: endpoint {
remote-endpoint = <&replicator_out0>;
};
};
};
};
@ -785,10 +810,11 @@
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
port {
tpiu_in: endpoint {
slave-mode;
remote-endpoint = <&replicator_out1>;
in-ports {
port {
tpiu_in: endpoint {
remote-endpoint = <&replicator_out1>;
};
};
};
};
@ -800,7 +826,7 @@
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
ports {
out-ports {
#address-cells = <1>;
#size-cells = <0>;
@ -816,10 +842,11 @@
remote-endpoint = <&tpiu_in>;
};
};
port@2 {
reg = <0>;
};
in-ports {
port {
replicator_in: endpoint {
slave-mode;
remote-endpoint = <&etf_out>;
};
};
@ -833,20 +860,17 @@
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
out-ports {
port {
etf_out: endpoint {
remote-endpoint = <&replicator_in>;
};
};
port@1 {
reg = <0>;
};
in-ports {
port {
etf_in: endpoint {
slave-mode;
remote-endpoint = <&merger_out>;
};
};
@ -860,7 +884,7 @@
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
ports {
in-ports {
#address-cells = <1>;
#size-cells = <0>;
@ -873,12 +897,13 @@
port@1 {
reg = <1>;
merger_in1: endpoint {
slave-mode;
remote-endpoint = <&funnel1_out>;
};
};
port@8 {
reg = <0>;
};
out-ports {
port {
merger_out: endpoint {
remote-endpoint = <&etf_in>;
};
@ -893,7 +918,7 @@
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
ports {
in-ports {
#address-cells = <1>;
#size-cells = <0>;
@ -910,12 +935,13 @@
port@5 {
reg = <5>;
funnel1_in5: endpoint {
slave-mode;
remote-endpoint = <&kpss_out>;
};
};
port@8 {
reg = <0>;
};
out-ports {
port {
funnel1_out: endpoint {
remote-endpoint = <&merger_in1>;
};
@ -930,40 +956,38 @@
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
ports {
in-ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
kpss_in0: endpoint {
slave-mode;
remote-endpoint = <&etm0_out>;
};
};
port@1 {
reg = <1>;
kpss_in1: endpoint {
slave-mode;
remote-endpoint = <&etm1_out>;
};
};
port@2 {
reg = <2>;
kpss_in2: endpoint {
slave-mode;
remote-endpoint = <&etm2_out>;
};
};
port@3 {
reg = <3>;
kpss_in3: endpoint {
slave-mode;
remote-endpoint = <&etm3_out>;
};
};
port@8 {
reg = <0>;
};
out-ports {
port {
kpss_out: endpoint {
remote-endpoint = <&funnel1_in5>;
};
@ -980,9 +1004,11 @@
cpu = <&CPU0>;
port {
etm0_out: endpoint {
remote-endpoint = <&kpss_in0>;
out-ports {
port {
etm0_out: endpoint {
remote-endpoint = <&kpss_in0>;
};
};
};
};
@ -996,9 +1022,11 @@
cpu = <&CPU1>;
port {
etm1_out: endpoint {
remote-endpoint = <&kpss_in1>;
out-ports {
port {
etm1_out: endpoint {
remote-endpoint = <&kpss_in1>;
};
};
};
};
@ -1012,9 +1040,11 @@
cpu = <&CPU2>;
port {
etm2_out: endpoint {
remote-endpoint = <&kpss_in2>;
out-ports {
port {
etm2_out: endpoint {
remote-endpoint = <&kpss_in2>;
};
};
};
};
@ -1028,9 +1058,11 @@
cpu = <&CPU3>;
port {
etm3_out: endpoint {
remote-endpoint = <&kpss_in3>;
out-ports {
port {
etm3_out: endpoint {
remote-endpoint = <&kpss_in3>;
};
};
};
};
@ -1040,21 +1072,21 @@
compatible = "qcom,smd";
adsp {
interrupts = <0 156 IRQ_TYPE_EDGE_RISING>;
interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&apcs 8 8>;
qcom,smd-edge = <1>;
};
modem {
interrupts = <0 25 IRQ_TYPE_EDGE_RISING>;
interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&apcs 8 12>;
qcom,smd-edge = <0>;
};
rpm {
interrupts = <0 168 1>;
interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&apcs 8 0>;
qcom,smd-edge = <15>;