Merge branch 'linus' into sched/devel

Documentation/networking/ip-sysctl.txt

@@ -148,9 +148,9 @@ tcp_available_congestion_control - STRING
 	but not loaded.
 
 tcp_base_mss - INTEGER
-	The initial value of search_low to be used by Packetization Layer
+	The initial value of search_low to be used by the packetization layer
-	Path MTU Discovery (MTU probing).  If MTU probing is enabled,
+	Path MTU discovery (MTU probing).  If MTU probing is enabled,
-	this is the inital MSS used by the connection.
+	this is the initial MSS used by the connection.
 
 tcp_congestion_control - STRING
 	Set the congestion control algorithm to be used for new
@@ -185,10 +185,9 @@ tcp_frto - INTEGER
 	timeouts.  It is particularly beneficial in wireless environments
 	where packet loss is typically due to random radio interference
 	rather than intermediate router congestion.  F-RTO is sender-side
-	only modification.  Therefore it does not require any support from
+	only modification. Therefore it does not require any support from
-	the peer, but in a typical case, however, where wireless link is
+	the peer.
-	the local access link and most of the data flows downlink, the
+
-	faraway servers should have F-RTO enabled to take advantage of it.
 	If set to 1, basic version is enabled.  2 enables SACK enhanced
 	F-RTO if flow uses SACK.  The basic version can be used also when
 	SACK is in use though scenario(s) with it exists where F-RTO
@@ -276,7 +275,7 @@ tcp_mem - vector of 3 INTEGERs: min, pressure, max
 	memory.
 
 tcp_moderate_rcvbuf - BOOLEAN
-	If set, TCP performs receive buffer autotuning, attempting to
+	If set, TCP performs receive buffer auto-tuning, attempting to
 	automatically size the buffer (no greater than tcp_rmem[2]) to
 	match the size required by the path for full throughput.  Enabled by
 	default.
@@ -336,7 +335,7 @@ tcp_rmem - vector of 3 INTEGERs: min, default, max
 	pressure.
 	Default: 8K
 
-	default: default size of receive buffer used by TCP sockets.
+	default: initial size of receive buffer used by TCP sockets.
 	This value overrides net.core.rmem_default used by other protocols.
 	Default: 87380 bytes. This value results in window of 65535 with
 	default setting of tcp_adv_win_scale and tcp_app_win:0 and a bit
@@ -344,8 +343,10 @@ tcp_rmem - vector of 3 INTEGERs: min, default, max
 
 	max: maximal size of receive buffer allowed for automatically
 	selected receiver buffers for TCP socket. This value does not override
-	net.core.rmem_max, "static" selection via SO_RCVBUF does not use this.
+	net.core.rmem_max.  Calling setsockopt() with SO_RCVBUF disables
-	Default: 87380*2 bytes.
+	automatic tuning of that socket's receive buffer size, in which
+	case this value is ignored.
+	Default: between 87380B and 4MB, depending on RAM size.
 
 tcp_sack - BOOLEAN
 	Enable select acknowledgments (SACKS).
@@ -358,7 +359,7 @@ tcp_slow_start_after_idle - BOOLEAN
 	Default: 1
 
 tcp_stdurg - BOOLEAN
-	Use the Host requirements interpretation of the TCP urg pointer field.
+	Use the Host requirements interpretation of the TCP urgent pointer field.
 	Most hosts use the older BSD interpretation, so if you turn this on
 	Linux might not communicate correctly with them.
 	Default: FALSE
@@ -371,12 +372,12 @@ tcp_synack_retries - INTEGER
 tcp_syncookies - BOOLEAN
 	Only valid when the kernel was compiled with CONFIG_SYNCOOKIES
 	Send out syncookies when the syn backlog queue of a socket
-	overflows. This is to prevent against the common 'syn flood attack'
+	overflows. This is to prevent against the common 'SYN flood attack'
 	Default: FALSE
 
 	Note, that syncookies is fallback facility.
 	It MUST NOT be used to help highly loaded servers to stand
-	against legal connection rate. If you see synflood warnings
+	against legal connection rate. If you see SYN flood warnings
 	in your logs, but investigation	shows that they occur
 	because of overload with legal connections, you should tune
 	another parameters until this warning disappear.
@@ -386,7 +387,7 @@ tcp_syncookies - BOOLEAN
 	to use TCP extensions, can result in serious degradation
 	of some services (f.e. SMTP relaying), visible not by you,
 	but your clients and relays, contacting you. While you see
-	synflood warnings in logs not being really flooded, your server
+	SYN flood warnings in logs not being really flooded, your server
 	is seriously misconfigured.
 
 tcp_syn_retries - INTEGER
@@ -419,19 +420,21 @@ tcp_window_scaling - BOOLEAN
 	Enable window scaling as defined in RFC1323.
 
 tcp_wmem - vector of 3 INTEGERs: min, default, max
-	min: Amount of memory reserved for send buffers for TCP socket.
+	min: Amount of memory reserved for send buffers for TCP sockets.
 	Each TCP socket has rights to use it due to fact of its birth.
 	Default: 4K
 
-	default: Amount of memory allowed for send buffers for TCP socket
+	default: initial size of send buffer used by TCP sockets.  This
-	by default. This value overrides net.core.wmem_default used
+	value overrides net.core.wmem_default used by other protocols.
-	by other protocols, it is usually lower than net.core.wmem_default.
+	It is usually lower than net.core.wmem_default.
 	Default: 16K
 
-	max: Maximal amount of memory allowed for automatically selected
+	max: Maximal amount of memory allowed for automatically tuned
-	send buffers for TCP socket. This value does not override
+	send buffers for TCP sockets. This value does not override
-	net.core.wmem_max, "static" selection via SO_SNDBUF does not use this.
+	net.core.wmem_max.  Calling setsockopt() with SO_SNDBUF disables
-	Default: 128K
+	automatic tuning of that socket's send buffer size, in which case
+	this value is ignored.
+	Default: between 64K and 4MB, depending on RAM size.
 
 tcp_workaround_signed_windows - BOOLEAN
 	If set, assume no receipt of a window scaling option means the
@@ -1060,24 +1063,193 @@ bridge-nf-filter-pppoe-tagged - BOOLEAN
 	Default: 1
 
 
+proc/sys/net/sctp/* Variables:
+
+addip_enable - BOOLEAN
+	Enable or disable extension of  Dynamic Address Reconfiguration
+	(ADD-IP) functionality specified in RFC5061.  This extension provides
+	the ability to dynamically add and remove new addresses for the SCTP
+	associations.
+
+	1: Enable extension.
+
+	0: Disable extension.
+
+	Default: 0
+
+addip_noauth_enable - BOOLEAN
+	Dynamic Address Reconfiguration (ADD-IP) requires the use of
+	authentication to protect the operations of adding or removing new
+	addresses.  This requirement is mandated so that unauthorized hosts
+	would not be able to hijack associations.  However, older
+	implementations may not have implemented this requirement while
+	allowing the ADD-IP extension.  For reasons of interoperability,
+	we provide this variable to control the enforcement of the
+	authentication requirement.
+
+	1: Allow ADD-IP extension to be used without authentication.  This
+	   should only be set in a closed environment for interoperability
+	   with older implementations.
+
+	0: Enforce the authentication requirement
+
+	Default: 0
+
+auth_enable - BOOLEAN
+	Enable or disable Authenticated Chunks extension.  This extension
+	provides the ability to send and receive authenticated chunks and is
+	required for secure operation of Dynamic Address Reconfiguration
+	(ADD-IP) extension.
+
+	1: Enable this extension.
+	0: Disable this extension.
+
+	Default: 0
+
+prsctp_enable - BOOLEAN
+	Enable or disable the Partial Reliability extension (RFC3758) which
+	is used to notify peers that a given DATA should no longer be expected.
+
+	1: Enable extension
+	0: Disable
+
+	Default: 1
+
+max_burst - INTEGER
+	The limit of the number of new packets that can be initially sent.  It
+	controls how bursty the generated traffic can be.
+
+	Default: 4
+
+association_max_retrans - INTEGER
+	Set the maximum number for retransmissions that an association can
+	attempt deciding that the remote end is unreachable.  If this value
+	is exceeded, the association is terminated.
+
+	Default: 10
+
+max_init_retransmits - INTEGER
+	The maximum number of retransmissions of INIT and COOKIE-ECHO chunks
+	that an association will attempt before declaring the destination
+	unreachable and terminating.
+
+	Default: 8
+
+path_max_retrans - INTEGER
+	The maximum number of retransmissions that will be attempted on a given
+	path.  Once this threshold is exceeded, the path is considered
+	unreachable, and new traffic will use a different path when the
+	association is multihomed.
+
+	Default: 5
+
+rto_initial - INTEGER
+	The initial round trip timeout value in milliseconds that will be used
+	in calculating round trip times.  This is the initial time interval
+	for retransmissions.
+
+	Default: 3000
+
+rto_max - INTEGER
+	The maximum value (in milliseconds) of the round trip timeout.  This
+	is the largest time interval that can elapse between retransmissions.
+
+	Default: 60000
+
+rto_min - INTEGER
+	The minimum value (in milliseconds) of the round trip timeout.  This
+	is the smallest time interval the can elapse between retransmissions.
+
+	Default: 1000
+
+hb_interval - INTEGER
+	The interval (in milliseconds) between HEARTBEAT chunks.  These chunks
+	are sent at the specified interval on idle paths to probe the state of
+	a given path between 2 associations.
+
+	Default: 30000
+
+sack_timeout - INTEGER
+	The amount of time (in milliseconds) that the implementation will wait
+	to send a SACK.
+
+	Default: 200
+
+valid_cookie_life - INTEGER
+	The default lifetime of the SCTP cookie (in milliseconds).  The cookie
+	is used during association establishment.
+
+	Default: 60000
+
+cookie_preserve_enable - BOOLEAN
+	Enable or disable the ability to extend the lifetime of the SCTP cookie
+	that is used during the establishment phase of SCTP association
+
+	1: Enable cookie lifetime extension.
+	0: Disable
+
+	Default: 1
+
+rcvbuf_policy - INTEGER
+	Determines if the receive buffer is attributed to the socket or to
+	association.   SCTP supports the capability to create multiple
+	associations on a single socket.  When using this capability, it is
+	possible that a single stalled association that's buffering a lot
+	of data may block other associations from delivering their data by
+	consuming all of the receive buffer space.  To work around this,
+	the rcvbuf_policy could be set to attribute the receiver buffer space
+	to each association instead of the socket.  This prevents the described
+	blocking.
+
+	1: rcvbuf space is per association
+	0: recbuf space is per socket
+
+	Default: 0
+
+sndbuf_policy - INTEGER
+	Similar to rcvbuf_policy above, this applies to send buffer space.
+
+	1: Send buffer is tracked per association
+	0: Send buffer is tracked per socket.
+
+	Default: 0
+
+sctp_mem - vector of 3 INTEGERs: min, pressure, max
+	Number of pages allowed for queueing by all SCTP sockets.
+
+	min: Below this number of pages SCTP is not bothered about its
+	memory appetite. When amount of memory allocated by SCTP exceeds
+	this number, SCTP starts to moderate memory usage.
+
+	pressure: This value was introduced to follow format of tcp_mem.
+
+	max: Number of pages allowed for queueing by all SCTP sockets.
+
+	Default is calculated at boot time from amount of available memory.
+
+sctp_rmem - vector of 3 INTEGERs: min, default, max
+	See tcp_rmem for a description.
+
+sctp_wmem  - vector of 3 INTEGERs: min, default, max
+	See tcp_wmem for a description.
+
 UNDOCUMENTED:
 
-dev_weight FIXME
+/proc/sys/net/core/*
-discovery_slots FIXME
+	dev_weight FIXME
-discovery_timeout FIXME
-fast_poll_increase FIXME
-ip6_queue_maxlen FIXME
-lap_keepalive_time FIXME
-lo_cong FIXME
-max_baud_rate FIXME
-max_dgram_qlen FIXME
-max_noreply_time FIXME
-max_tx_data_size FIXME
-max_tx_window FIXME
-min_tx_turn_time FIXME
-mod_cong FIXME
-no_cong FIXME
-no_cong_thresh FIXME
-slot_timeout FIXME
-warn_noreply_time FIXME
 
+/proc/sys/net/unix/*
+	max_dgram_qlen FIXME
+
+/proc/sys/net/irda/*
+	fast_poll_increase FIXME
+	warn_noreply_time FIXME
+	discovery_slots FIXME
+	slot_timeout FIXME
+	max_baud_rate FIXME
+	discovery_timeout FIXME
+	lap_keepalive_time FIXME
+	max_noreply_time FIXME
+	max_tx_data_size FIXME
+	max_tx_window FIXME
+	min_tx_turn_time FIXME

MAINTAINERS

@@ -3082,8 +3082,8 @@ L:	linux-scsi@vger.kernel.org
 S:	Maintained
 
 OPROFILE
-P:	Philippe Elie
+P:	Robert Richter
-M:	phil.el@wanadoo.fr
+M:	robert.richter@amd.com
 L:	oprofile-list@lists.sf.net
 S:	Maintained
 

arch/mips/mm/c-r3k.c

@@ -26,7 +26,7 @@
 static unsigned long icache_size, dcache_size;		/* Size in bytes */
 static unsigned long icache_lsize, dcache_lsize;	/* Size in bytes */
 
-unsigned long __init r3k_cache_size(unsigned long ca_flags)
+unsigned long __cpuinit r3k_cache_size(unsigned long ca_flags)
 {
 	unsigned long flags, status, dummy, size;
 	volatile unsigned long *p;
@@ -61,7 +61,7 @@ unsigned long __init r3k_cache_size(unsigned long ca_flags)
 	return size * sizeof(*p);
 }
 
-unsigned long __init r3k_cache_lsize(unsigned long ca_flags)
+unsigned long __cpuinit r3k_cache_lsize(unsigned long ca_flags)
 {
 	unsigned long flags, status, lsize, i;
 	volatile unsigned long *p;
@@ -90,7 +90,7 @@ unsigned long __init r3k_cache_lsize(unsigned long ca_flags)
 	return lsize * sizeof(*p);
 }
 
-static void __init r3k_probe_cache(void)
+static void __cpuinit r3k_probe_cache(void)
 {
 	dcache_size = r3k_cache_size(ST0_ISC);
 	if (dcache_size)

arch/mips/mm/page.c

@@ -235,13 +235,12 @@ static void __cpuinit set_prefetch_parameters(void)
 	}
 	/*
 	 * Too much unrolling will overflow the available space in
-	 * clear_space_array / copy_page_array. 8 words sounds generous,
+	 * clear_space_array / copy_page_array.
-	 * but a R4000 with 128 byte L2 line length can exceed even that.
 	 */
-	half_clear_loop_size = min(8 * clear_word_size,
+	half_clear_loop_size = min(16 * clear_word_size,
 				   max(cache_line_size >> 1,
 				       4 * clear_word_size));
-	half_copy_loop_size = min(8 * copy_word_size,
+	half_copy_loop_size = min(16 * copy_word_size,
 				  max(cache_line_size >> 1,
 				      4 * copy_word_size));
 }
@@ -263,21 +262,23 @@ static inline void __cpuinit build_clear_pref(u32 **buf, int off)
 	if (pref_bias_clear_store) {
 		uasm_i_pref(buf, pref_dst_mode, pref_bias_clear_store + off,
 			    A0);
-	} else if (cpu_has_cache_cdex_s) {
+	} else if (cache_line_size == (half_clear_loop_size << 1)) {
-		uasm_i_cache(buf, Create_Dirty_Excl_SD, off, A0);
+		if (cpu_has_cache_cdex_s) {
-	} else if (cpu_has_cache_cdex_p) {
+			uasm_i_cache(buf, Create_Dirty_Excl_SD, off, A0);
-		if (R4600_V1_HIT_CACHEOP_WAR && cpu_is_r4600_v1_x()) {
+		} else if (cpu_has_cache_cdex_p) {
-			uasm_i_nop(buf);
+			if (R4600_V1_HIT_CACHEOP_WAR && cpu_is_r4600_v1_x()) {
-			uasm_i_nop(buf);
+				uasm_i_nop(buf);
-			uasm_i_nop(buf);
+				uasm_i_nop(buf);
-			uasm_i_nop(buf);
+				uasm_i_nop(buf);
+				uasm_i_nop(buf);
+			}
+
+			if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x())
+				uasm_i_lw(buf, ZERO, ZERO, AT);
+
+			uasm_i_cache(buf, Create_Dirty_Excl_D, off, A0);
+		}
 		}
-
-		if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x())
-			uasm_i_lw(buf, ZERO, ZERO, AT);
-
-		uasm_i_cache(buf, Create_Dirty_Excl_D, off, A0);
-	}
 }
 
 void __cpuinit build_clear_page(void)
@@ -403,20 +404,22 @@ static inline void build_copy_store_pref(u32 **buf, int off)
 	if (pref_bias_copy_store) {
 		uasm_i_pref(buf, pref_dst_mode, pref_bias_copy_store + off,
 			    A0);
-	} else if (cpu_has_cache_cdex_s) {
+	} else if (cache_line_size == (half_copy_loop_size << 1)) {
-		uasm_i_cache(buf, Create_Dirty_Excl_SD, off, A0);
+		if (cpu_has_cache_cdex_s) {
-	} else if (cpu_has_cache_cdex_p) {
+			uasm_i_cache(buf, Create_Dirty_Excl_SD, off, A0);
-		if (R4600_V1_HIT_CACHEOP_WAR && cpu_is_r4600_v1_x()) {
+		} else if (cpu_has_cache_cdex_p) {
-			uasm_i_nop(buf);
+			if (R4600_V1_HIT_CACHEOP_WAR && cpu_is_r4600_v1_x()) {
-			uasm_i_nop(buf);
+				uasm_i_nop(buf);
-			uasm_i_nop(buf);
+				uasm_i_nop(buf);
-			uasm_i_nop(buf);
+				uasm_i_nop(buf);
+				uasm_i_nop(buf);
+			}
+
+			if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x())
+				uasm_i_lw(buf, ZERO, ZERO, AT);
+
+			uasm_i_cache(buf, Create_Dirty_Excl_D, off, A0);
 		}
-
-		if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x())
-			uasm_i_lw(buf, ZERO, ZERO, AT);
-
-		uasm_i_cache(buf, Create_Dirty_Excl_D, off, A0);
 	}
 }
 

arch/mips/mm/sc-rm7k.c

@@ -86,7 +86,7 @@ static void rm7k_sc_inv(unsigned long addr, unsigned long size)
 /*
  * This function is executed in uncached address space.
  */
-static __init void __rm7k_sc_enable(void)
+static __cpuinit void __rm7k_sc_enable(void)
 {
 	int i;
 
@@ -107,7 +107,7 @@ static __init void __rm7k_sc_enable(void)
 	}
 }
 
-static __init void rm7k_sc_enable(void)
+static __cpuinit void rm7k_sc_enable(void)
 {
 	if (read_c0_config() & RM7K_CONF_SE)
 		return;

arch/powerpc/kernel/legacy_serial.c

@@ -33,13 +33,14 @@ static struct legacy_serial_info {
 	phys_addr_t			taddr;
 } legacy_serial_infos[MAX_LEGACY_SERIAL_PORTS];
 
-static struct __initdata of_device_id parents[] = {
+static struct __initdata of_device_id legacy_serial_parents[] = {
 	{.type = "soc",},
 	{.type = "tsi-bridge",},
 	{.type = "opb", },
 	{.compatible = "ibm,opb",},
 	{.compatible = "simple-bus",},
 	{.compatible = "wrs,epld-localbus",},
+	{},
 };
 
 static unsigned int legacy_serial_count;
@@ -327,7 +328,7 @@ void __init find_legacy_serial_ports(void)
 		struct device_node *parent = of_get_parent(np);
 		if (!parent)
 			continue;
-		if (of_match_node(parents, parent) != NULL) {
+		if (of_match_node(legacy_serial_parents, parent) != NULL) {
 			index = add_legacy_soc_port(np, np);
 			if (index >= 0 && np == stdout)
 				legacy_serial_console = index;

arch/powerpc/kernel/of_platform.c

@@ -76,6 +76,8 @@ struct of_device* of_platform_device_create(struct device_node *np,
 		return NULL;
 
 	dev->dma_mask = 0xffffffffUL;
+	dev->dev.coherent_dma_mask = DMA_32BIT_MASK;
+
 	dev->dev.bus = &of_platform_bus_type;
 
 	/* We do not fill the DMA ops for platform devices by default.

arch/um/Makefile

@@ -77,7 +77,6 @@ include $(srctree)/$(ARCH_DIR)/Makefile-os-$(OS)
 KERNEL_DEFINES = $(strip -Derrno=kernel_errno -Dsigprocmask=kernel_sigprocmask \
 			 -Dmktime=kernel_mktime $(ARCH_KERNEL_DEFINES))
 KBUILD_CFLAGS += $(KERNEL_DEFINES)
-KBUILD_CFLAGS += $(call cc-option,-fno-unit-at-a-time,)
 
 PHONY += linux
 

arch/um/Makefile-i386

@@ -32,4 +32,11 @@ cflags-y += $(call cc-option,-mpreferred-stack-boundary=2)
 # an unresolved reference.
 cflags-y += -ffreestanding
 
+# Disable unit-at-a-time mode on pre-gcc-4.0 compilers, it makes gcc use
+# a lot more stack due to the lack of sharing of stacklots.  Also, gcc
+# 4.3.0 needs -funit-at-a-time for extern inline functions.
+KBUILD_CFLAGS += $(shell if [ $(call cc-version) -lt 0400 ] ; then \
+			echo $(call cc-option,-fno-unit-at-a-time); \
+			else echo $(call cc-option,-funit-at-a-time); fi ;)
+
 KBUILD_CFLAGS += $(cflags-y)

arch/um/Makefile-x86_64

@@ -21,3 +21,6 @@ HEADER_ARCH := x86
 
 LINK-$(CONFIG_LD_SCRIPT_DYN) += -Wl,-rpath,/lib64
 LINK-y += -m64
+
+# Do unit-at-a-time unconditionally on x86_64, following the host
+KBUILD_CFLAGS += $(call cc-option,-funit-at-a-time)

arch/x86/kernel/.gitignore

@@ -1,2 +1,3 @@
 vsyscall.lds
 vsyscall_32.lds
+vmlinux.lds

arch/x86/mm/ioremap.c

@@ -300,6 +300,29 @@ void __iomem *ioremap_cache(resource_size_t phys_addr, unsigned long size)
 }
 EXPORT_SYMBOL(ioremap_cache);
 
+static void __iomem *ioremap_default(resource_size_t phys_addr,
+					unsigned long size)
+{
+	unsigned long flags;
+	void *ret;
+	int err;
+
+	/*
+	 * - WB for WB-able memory and no other conflicting mappings
+	 * - UC_MINUS for non-WB-able memory with no other conflicting mappings
+	 * - Inherit from confliting mappings otherwise
+	 */
+	err = reserve_memtype(phys_addr, phys_addr + size, -1, &flags);
+	if (err < 0)
+		return NULL;
+
+	ret = (void *) __ioremap_caller(phys_addr, size, flags,
+					__builtin_return_address(0));
+
+	free_memtype(phys_addr, phys_addr + size);
+	return (void __iomem *)ret;
+}
+
 /**
  * iounmap - Free a IO remapping
  * @addr: virtual address from ioremap_*
@@ -365,7 +388,7 @@ void *xlate_dev_mem_ptr(unsigned long phys)
 	if (page_is_ram(start >> PAGE_SHIFT))
 		return __va(phys);
 
-	addr = (void *)ioremap(start, PAGE_SIZE);
+	addr = (void *)ioremap_default(start, PAGE_SIZE);
 	if (addr)
 		addr = (void *)((unsigned long)addr | (phys & ~PAGE_MASK));
 

arch/x86/pci/common.c

@@ -328,18 +328,18 @@ static struct dmi_system_id __devinitdata pciprobe_dmi_table[] = {
 #endif
 	{
 		.callback = set_bf_sort,
-		.ident = "HP ProLiant DL360",
+		.ident = "HP ProLiant DL385 G2",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL360"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL385 G2"),
 		},
 	},
 	{
 		.callback = set_bf_sort,
-		.ident = "HP ProLiant DL380",
+		.ident = "HP ProLiant DL585 G2",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL380"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL585 G2"),
 		},
 	},
 	{}

block/bsg.c

@@ -709,11 +709,12 @@ static void bsg_kref_release_function(struct kref *kref)
 {
 	struct bsg_class_device *bcd =
 		container_of(kref, struct bsg_class_device, ref);
+	struct device *parent = bcd->parent;
 
 	if (bcd->release)
 		bcd->release(bcd->parent);
 
-	put_device(bcd->parent);
+	put_device(parent);
 }
 
 static int bsg_put_device(struct bsg_device *bd)

crypto/chainiv.c

@@ -117,6 +117,7 @@ static int chainiv_init(struct crypto_tfm *tfm)
 static int async_chainiv_schedule_work(struct async_chainiv_ctx *ctx)
 {
 	int queued;
+	int err = ctx->err;
 
 	if (!ctx->queue.qlen) {
 		smp_mb__before_clear_bit();
@@ -131,7 +132,7 @@ static int async_chainiv_schedule_work(struct async_chainiv_ctx *ctx)
 	BUG_ON(!queued);
 
 out:
-	return ctx->err;
+	return err;
 }
 
 static int async_chainiv_postpone_request(struct skcipher_givcrypt_request *req)
@@ -227,6 +228,7 @@ static void async_chainiv_do_postponed(struct work_struct *work)
 						     postponed);
 	struct skcipher_givcrypt_request *req;
 	struct ablkcipher_request *subreq;
+	int err;
 
 	/* Only handle one request at a time to avoid hogging keventd. */
 	spin_lock_bh(&ctx->lock);
@@ -241,7 +243,11 @@ static void async_chainiv_do_postponed(struct work_struct *work)
 	subreq = skcipher_givcrypt_reqctx(req);
 	subreq->base.flags |= CRYPTO_TFM_REQ_MAY_SLEEP;
 
-	async_chainiv_givencrypt_tail(req);
+	err = async_chainiv_givencrypt_tail(req);
+
+	local_bh_disable();
+	skcipher_givcrypt_complete(req, err);
+	local_bh_enable();
 }
 
 static int async_chainiv_init(struct crypto_tfm *tfm)

crypto/tcrypt.c

@@ -586,12 +586,6 @@ static void test_cipher(char *algo, int enc,
 	j = 0;
 	for (i = 0; i < tcount; i++) {
 
-		data = kzalloc(template[i].ilen, GFP_KERNEL);
-		if (!data)
-			continue;
-
-		memcpy(data, template[i].input, template[i].ilen);
-
 		if (template[i].iv)
 			memcpy(iv, template[i].iv, MAX_IVLEN);
 		else
@@ -613,10 +607,8 @@ static void test_cipher(char *algo, int enc,
 				printk("setkey() failed flags=%x\n",
 						crypto_ablkcipher_get_flags(tfm));
 
-				if (!template[i].fail) {
+				if (!template[i].fail)
-					kfree(data);
 					goto out;
-				}
 			}
 
 			temp = 0;

drivers/ata/libata-acpi.c

@@ -29,14 +29,16 @@
 enum {
 	ATA_ACPI_FILTER_SETXFER	= 1 << 0,
 	ATA_ACPI_FILTER_LOCK	= 1 << 1,
+	ATA_ACPI_FILTER_DIPM	= 1 << 2,
 
 	ATA_ACPI_FILTER_DEFAULT	= ATA_ACPI_FILTER_SETXFER |
-				  ATA_ACPI_FILTER_LOCK,
+				  ATA_ACPI_FILTER_LOCK |
+				  ATA_ACPI_FILTER_DIPM,
 };
 
 static unsigned int ata_acpi_gtf_filter = ATA_ACPI_FILTER_DEFAULT;
 module_param_named(acpi_gtf_filter, ata_acpi_gtf_filter, int, 0644);
-MODULE_PARM_DESC(acpi_gtf_filter, "filter mask for ACPI _GTF commands, set to filter out (0x1=set xfermode, 0x2=lock/freeze lock)");
+MODULE_PARM_DESC(acpi_gtf_filter, "filter mask for ACPI _GTF commands, set to filter out (0x1=set xfermode, 0x2=lock/freeze lock, 0x4=DIPM)");
 
 #define NO_PORT_MULT		0xffff
 #define SATA_ADR(root, pmp)	(((root) << 16) | (pmp))
@@ -195,6 +197,10 @@ static void ata_acpi_handle_hotplug(struct ata_port *ap, struct ata_device *dev,
 		/* This device does not support hotplug */
 		return;
 
+	if (event == ACPI_NOTIFY_BUS_CHECK ||
+	    event == ACPI_NOTIFY_DEVICE_CHECK)
+		status = acpi_evaluate_integer(handle, "_STA", NULL, &sta);
+
 	spin_lock_irqsave(ap->lock, flags);
 
 	switch (event) {
@@ -202,7 +208,6 @@ static void ata_acpi_handle_hotplug(struct ata_port *ap, struct ata_device *dev,
 	case ACPI_NOTIFY_DEVICE_CHECK:
 		ata_ehi_push_desc(ehi, "ACPI event");
 
-		status = acpi_evaluate_integer(handle, "_STA", NULL, &sta);
 		if (ACPI_FAILURE(status)) {
 			ata_port_printk(ap, KERN_ERR,
 				"acpi: failed to determine bay status (0x%x)\n",
@@ -690,6 +695,14 @@ static int ata_acpi_filter_tf(const struct ata_taskfile *tf,
 			return 1;
 	}
 
+	if (ata_acpi_gtf_filter & ATA_ACPI_FILTER_DIPM) {
+		/* inhibit enabling DIPM */
+		if (tf->command == ATA_CMD_SET_FEATURES &&
+		    tf->feature == SETFEATURES_SATA_ENABLE &&
+		    tf->nsect == SATA_DIPM)
+			return 1;
+	}
+
 	return 0;
 }
 

drivers/ata/pata_sis.c

@@ -56,6 +56,7 @@ static const struct sis_laptop sis_laptop[] = {
 	{ 0x5513, 0x1043, 0x1107 },	/* ASUS A6K */
 	{ 0x5513, 0x1734, 0x105F },	/* FSC Amilo A1630 */
 	{ 0x5513, 0x1071, 0x8640 },     /* EasyNote K5305 */
+	{ 0x5513, 0x1039, 0x5513 },	/* Targa Visionary 1000 */
 	/* end marker */
 	{ 0, }
 };

drivers/char/ipmi/ipmi_watchdog.c

@@ -755,9 +755,8 @@ static ssize_t ipmi_write(struct file *file,
 		rv = ipmi_heartbeat();
 		if (rv)
 			return rv;
-		return 1;
 	}
-	return 0;
+	return len;
 }
 
 static ssize_t ipmi_read(struct file *file,

drivers/char/pcmcia/ipwireless/hardware.c

@@ -590,8 +590,10 @@ static struct ipw_rx_packet *pool_allocate(struct ipw_hardware *hw,
 		packet = kmalloc(sizeof(struct ipw_rx_packet) +
 				old_packet->length + minimum_free_space,
 				GFP_ATOMIC);
-		if (!packet)
+		if (!packet) {
+			kfree(old_packet);
 			return NULL;
+		}
 		memcpy(packet, old_packet,
 				sizeof(struct ipw_rx_packet)
 					+ old_packet->length);

drivers/char/rtc.c

@@ -678,12 +678,13 @@ static int rtc_do_ioctl(unsigned int cmd, unsigned long arg, int kernel)
 		if (arg != (1<<tmp))
 			return -EINVAL;
 
+		rtc_freq = arg;
+
 		spin_lock_irqsave(&rtc_lock, flags);
 		if (hpet_set_periodic_freq(arg)) {
 			spin_unlock_irqrestore(&rtc_lock, flags);
 			return 0;
 		}
-		rtc_freq = arg;
 
 		val = CMOS_READ(RTC_FREQ_SELECT) & 0xf0;
 		val |= (16 - tmp);

drivers/char/tpm/tpm_tis.c

@@ -623,6 +623,7 @@ static struct pnp_device_id tpm_pnp_tbl[] __devinitdata = {
 	{"IFX0102", 0},		/* Infineon */
 	{"BCM0101", 0},		/* Broadcom */
 	{"NSC1200", 0},		/* National */
+	{"ICO0102", 0},		/* Intel */
 	/* Add new here */
 	{"", 0},		/* User Specified */
 	{"", 0}			/* Terminator */

drivers/ide/arm/palm_bk3710.c

@@ -76,7 +76,7 @@ struct palm_bk3710_udmatiming {
 
 #include "../ide-timing.h"
 
-static long ide_palm_clk;
+static unsigned ideclk_period; /* in nanoseconds */
 
 static const struct palm_bk3710_udmatiming palm_bk3710_udmatimings[6] = {
 	{160, 240},		/* UDMA Mode 0 */
@@ -86,8 +86,6 @@ static const struct palm_bk3710_udmatiming palm_bk3710_udmatimings[6] = {
 	{85,  60},		/* UDMA Mode 4 */
 };
 
-static struct clk *ideclkp;
-
 static void palm_bk3710_setudmamode(void __iomem *base, unsigned int dev,
 				    unsigned int mode)
 {
@@ -97,10 +95,10 @@ static void palm_bk3710_setudmamode(void __iomem *base, unsigned int dev,
 
 	/* DMA Data Setup */
 	t0 = DIV_ROUND_UP(palm_bk3710_udmatimings[mode].cycletime,
-			  ide_palm_clk) - 1;
+			  ideclk_period) - 1;
-	tenv = DIV_ROUND_UP(20, ide_palm_clk) - 1;
+	tenv = DIV_ROUND_UP(20, ideclk_period) - 1;
 	trp = DIV_ROUND_UP(palm_bk3710_udmatimings[mode].rptime,
-			   ide_palm_clk) - 1;
+			   ideclk_period) - 1;
 
 	/* udmatim Register */
 	val16 = readw(base + BK3710_UDMATIM) & (dev ? 0xFF0F : 0xFFF0);
@@ -141,8 +139,8 @@ static void palm_bk3710_setdmamode(void __iomem *base, unsigned int dev,
 	cycletime = max_t(int, t->cycle, min_cycle);
 
 	/* DMA Data Setup */
-	t0 = DIV_ROUND_UP(cycletime, ide_palm_clk);
+	t0 = DIV_ROUND_UP(cycletime, ideclk_period);
-	td = DIV_ROUND_UP(t->active, ide_palm_clk);
+	td = DIV_ROUND_UP(t->active, ideclk_period);
 	tkw = t0 - td - 1;
 	td -= 1;
 
@@ -168,9 +166,9 @@ static void palm_bk3710_setpiomode(void __iomem *base, ide_drive_t *mate,
 	struct ide_timing *t;
 
 	/* PIO Data Setup */
-	t0 = DIV_ROUND_UP(cycletime, ide_palm_clk);
+	t0 = DIV_ROUND_UP(cycletime, ideclk_period);
 	t2 = DIV_ROUND_UP(ide_timing_find_mode(XFER_PIO_0 + mode)->active,
-			  ide_palm_clk);
+			  ideclk_period);
 
 	t2i = t0 - t2 - 1;
 	t2 -= 1;
@@ -192,8 +190,8 @@ static void palm_bk3710_setpiomode(void __iomem *base, ide_drive_t *mate,
 
 	/* TASKFILE Setup */
 	t = ide_timing_find_mode(XFER_PIO_0 + mode);
-	t0 = DIV_ROUND_UP(t->cyc8b, ide_palm_clk);
+	t0 = DIV_ROUND_UP(t->cyc8b, ideclk_period);
-	t2 = DIV_ROUND_UP(t->act8b, ide_palm_clk);
+	t2 = DIV_ROUND_UP(t->act8b, ideclk_period);
 
 	t2i = t0 - t2 - 1;
 	t2 -= 1;
@@ -350,22 +348,22 @@ static const struct ide_port_info __devinitdata palm_bk3710_port_info = {
 
 static int __devinit palm_bk3710_probe(struct platform_device *pdev)
 {
-	struct clk *clkp;
+	struct clk *clk;
 	struct resource *mem, *irq;
 	ide_hwif_t *hwif;
-	unsigned long base;
+	unsigned long base, rate;
 	int i;
 	hw_regs_t hw;
 	u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
 
-	clkp = clk_get(NULL, "IDECLK");
+	clk = clk_get(NULL, "IDECLK");
-	if (IS_ERR(clkp))
+	if (IS_ERR(clk))
 		return -ENODEV;
 
-	ideclkp = clkp;
+	clk_enable(clk);
-	clk_enable(ideclkp);
+	rate = clk_get_rate(clk);
-	ide_palm_clk = clk_get_rate(ideclkp)/100000;
+	ideclk_period = 1000000000UL / rate;
-	ide_palm_clk = (10000/ide_palm_clk) + 1;
+
 	/* Register the IDE interface with Linux ATA Interface */
 	memset(&hw, 0, sizeof(hw));
 

drivers/ide/ide-probe.c

@@ -1218,16 +1218,12 @@ static void drive_release_dev (struct device *dev)
 	complete(&drive->gendev_rel_comp);
 }
 
-#ifndef ide_default_irq
-#define ide_default_irq(irq) 0
-#endif
-
 static int hwif_init(ide_hwif_t *hwif)
 {
 	int old_irq;
 
 	if (!hwif->irq) {
-		hwif->irq = ide_default_irq(hwif->io_ports.data_addr);
+		hwif->irq = __ide_default_irq(hwif->io_ports.data_addr);
 		if (!hwif->irq) {
 			printk("%s: DISABLED, NO IRQ\n", hwif->name);
 			return 0;
@@ -1257,7 +1253,7 @@ static int hwif_init(ide_hwif_t *hwif)
 	 *	It failed to initialise. Find the default IRQ for 
 	 *	this port and try that.
 	 */
-	hwif->irq = ide_default_irq(hwif->io_ports.data_addr);
+	hwif->irq = __ide_default_irq(hwif->io_ports.data_addr);
 	if (!hwif->irq) {
 		printk("%s: Disabled unable to get IRQ %d.\n",
 			hwif->name, old_irq);

drivers/ide/pci/it8213.c

@@ -184,8 +184,7 @@ static const struct ide_port_info it8213_chipsets[] __devinitdata = {
 
 static int __devinit it8213_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
-	ide_setup_pci_device(dev, &it8213_chipsets[id->driver_data]);
+	return ide_setup_pci_device(dev, &it8213_chipsets[id->driver_data]);
-	return 0;
 }
 
 static const struct pci_device_id it8213_pci_tbl[] = {

drivers/ide/pci/ns87415.c

@@ -225,10 +225,6 @@ static int ns87415_dma_setup(ide_drive_t *drive)
 	return 1;
 }
 
-#ifndef ide_default_irq
-#define ide_default_irq(irq) 0
-#endif
-
 static void __devinit init_hwif_ns87415 (ide_hwif_t *hwif)
 {
 	struct pci_dev *dev = to_pci_dev(hwif->dev);
@@ -288,7 +284,7 @@ static void __devinit init_hwif_ns87415 (ide_hwif_t *hwif)
 	}
 
 	if (!using_inta)
-		hwif->irq = ide_default_irq(hwif->io_ports.data_addr);
+		hwif->irq = __ide_default_irq(hwif->io_ports.data_addr);
 	else if (!hwif->irq && hwif->mate && hwif->mate->irq)
 		hwif->irq = hwif->mate->irq;	/* share IRQ with mate */
 

drivers/infiniband/hw/cxgb3/iwch_provider.c

@@ -1096,7 +1096,9 @@ static ssize_t show_fw_ver(struct device *dev, struct device_attribute *attr, ch
 	struct net_device *lldev = iwch_dev->rdev.t3cdev_p->lldev;
 
 	PDBG("%s dev 0x%p\n", __func__, dev);
+	rtnl_lock();
 	lldev->ethtool_ops->get_drvinfo(lldev, &info);
+	rtnl_unlock();
 	return sprintf(buf, "%s\n", info.fw_version);
 }
 
@@ -1109,7 +1111,9 @@ static ssize_t show_hca(struct device *dev, struct device_attribute *attr,
 	struct net_device *lldev = iwch_dev->rdev.t3cdev_p->lldev;
 
 	PDBG("%s dev 0x%p\n", __func__, dev);
+	rtnl_lock();
 	lldev->ethtool_ops->get_drvinfo(lldev, &info);
+	rtnl_unlock();
 	return sprintf(buf, "%s\n", info.driver);
 }
 

drivers/isdn/i4l/isdn_common.c

@@ -1977,8 +1977,10 @@ isdn_writebuf_stub(int drvidx, int chan, const u_char __user * buf, int len)
 	if (!skb)
 		return -ENOMEM;
 	skb_reserve(skb, hl);
-	if (copy_from_user(skb_put(skb, len), buf, len))
+	if (copy_from_user(skb_put(skb, len), buf, len)) {
+		dev_kfree_skb(skb);
 		return -EFAULT;
+	}
 	ret = dev->drv[drvidx]->interface->writebuf_skb(drvidx, chan, 1, skb);
 	if (ret <= 0)
 		dev_kfree_skb(skb);

drivers/md/raid5.c

@@ -2017,12 +2017,7 @@ static int __handle_issuing_new_read_requests5(struct stripe_head *sh,
 			 */
 			s->uptodate++;
 			return 0; /* uptodate + compute == disks */
-		} else if ((s->uptodate < disks - 1) &&
+		} else if (test_bit(R5_Insync, &dev->flags)) {
-			test_bit(R5_Insync, &dev->flags)) {
-			/* Note: we hold off compute operations while checks are
-			 * in flight, but we still prefer 'compute' over 'read'
-			 * hence we only read if (uptodate < * disks-1)
-			 */
 			set_bit(R5_LOCKED, &dev->flags);
 			set_bit(R5_Wantread, &dev->flags);
 			if (!test_and_set_bit(STRIPE_OP_IO, &sh->ops.pending))

drivers/media/video/ov7670.c

@@ -406,8 +406,10 @@ static int ov7670_read(struct i2c_client *c, unsigned char reg,
 	int ret;
 
 	ret = i2c_smbus_read_byte_data(c, reg);
-	if (ret >= 0)
+	if (ret >= 0) {
 		*value = (unsigned char) ret;
+		ret = 0;
+	}
 	return ret;
 }
 

drivers/message/fusion/mptbase.c

@@ -1686,9 +1686,14 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
 		ioc->bus_type = SAS;
 	}
 
-	if (ioc->bus_type == SAS && mpt_msi_enable == -1)
+	if (mpt_msi_enable == -1) {
-		ioc->msi_enable = 1;
+		/* Enable on SAS, disable on FC and SPI */
-	else
+		if (ioc->bus_type == SAS)
+			ioc->msi_enable = 1;
+		else
+			ioc->msi_enable = 0;
+	} else
+		/* follow flag: 0 - disable; 1 - enable */
 		ioc->msi_enable = mpt_msi_enable;
 
 	if (ioc->errata_flag_1064)

drivers/message/fusion/mptspi.c

@@ -1266,13 +1266,18 @@ mptspi_dv_renegotiate(struct _MPT_SCSI_HOST *hd)
 static int
 mptspi_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
 {
-	struct _MPT_SCSI_HOST *hd = shost_priv(ioc->sh);
 	int rc;
 
 	rc = mptscsih_ioc_reset(ioc, reset_phase);
 
-	if (reset_phase == MPT_IOC_POST_RESET)
+	/* only try to do a renegotiation if we're properly set up
+	 * if we get an ioc fault on bringup, ioc->sh will be NULL */
+	if (reset_phase == MPT_IOC_POST_RESET &&
+	    ioc->sh) {
+		struct _MPT_SCSI_HOST *hd = shost_priv(ioc->sh);
+
 		mptspi_dv_renegotiate(hd);
+	}
 
 	return rc;
 }

drivers/mmc/host/pxamci.c

@@ -114,6 +114,7 @@ static void pxamci_setup_data(struct pxamci_host *host, struct mmc_data *data)
 	unsigned int nob = data->blocks;
 	unsigned long long clks;
 	unsigned int timeout;
+	bool dalgn = 0;
 	u32 dcmd;
 	int i;
 
@@ -152,6 +153,9 @@ static void pxamci_setup_data(struct pxamci_host *host, struct mmc_data *data)
 		host->sg_cpu[i].dcmd = dcmd | length;
 		if (length & 31 && !(data->flags & MMC_DATA_READ))
 			host->sg_cpu[i].dcmd |= DCMD_ENDIRQEN;
+		/* Not aligned to 8-byte boundary? */
+		if (sg_dma_address(&data->sg[i]) & 0x7)
+			dalgn = 1;
 		if (data->flags & MMC_DATA_READ) {
 			host->sg_cpu[i].dsadr = host->res->start + MMC_RXFIFO;
 			host->sg_cpu[i].dtadr = sg_dma_address(&data->sg[i]);
@@ -165,6 +169,15 @@ static void pxamci_setup_data(struct pxamci_host *host, struct mmc_data *data)
 	host->sg_cpu[host->dma_len - 1].ddadr = DDADR_STOP;
 	wmb();
 
+	/*
+	 * The PXA27x DMA controller encounters overhead when working with
+	 * unaligned (to 8-byte boundaries) data, so switch on byte alignment
+	 * mode only if we have unaligned data.
+	 */
+	if (dalgn)
+		DALGN |= (1 << host->dma);
+	else
+		DALGN &= (1 << host->dma);
 	DDADR(host->dma) = host->sg_dma;
 	DCSR(host->dma) = DCSR_RUN;
 }

drivers/net/ehea/ehea.h

@@ -40,7 +40,7 @@
 #include <asm/io.h>
 
 #define DRV_NAME	"ehea"
-#define DRV_VERSION	"EHEA_0091"
+#define DRV_VERSION	"EHEA_0092"
 
 /* eHEA capability flags */
 #define DLPAR_PORT_ADD_REM 1
@@ -452,7 +452,7 @@ struct ehea_bcmc_reg_entry {
 struct ehea_bcmc_reg_array {
 	struct ehea_bcmc_reg_entry *arr;
 	int num_entries;
-	struct mutex lock;
+	spinlock_t lock;
 };
 
 #define EHEA_PORT_UP 1
@@ -478,6 +478,7 @@ struct ehea_port {
 	int num_add_tx_qps;
 	int num_mcs;
 	int resets;
+	u64 flags;
 	u64 mac_addr;
 	u32 logical_port_id;
 	u32 port_speed;
@@ -501,7 +502,8 @@ struct port_res_cfg {
 };
 
 enum ehea_flag_bits {
-	__EHEA_STOP_XFER
+	__EHEA_STOP_XFER,
+	__EHEA_DISABLE_PORT_RESET
 };
 
 void ehea_set_ethtool_ops(struct net_device *netdev);

drivers/net/ehea/ehea_main.c

@@ -118,6 +118,7 @@ static struct of_device_id ehea_device_table[] = {
 	},
 	{},
 };
+MODULE_DEVICE_TABLE(of, ehea_device_table);
 
 static struct of_platform_driver ehea_driver = {
 	.name = "ehea",
@@ -137,6 +138,12 @@ void ehea_dump(void *adr, int len, char *msg)
 	}
 }
 
+void ehea_schedule_port_reset(struct ehea_port *port)
+{
+	if (!test_bit(__EHEA_DISABLE_PORT_RESET, &port->flags))
+		schedule_work(&port->reset_task);
+}
+
 static void ehea_update_firmware_handles(void)
 {
 	struct ehea_fw_handle_entry *arr = NULL;
@@ -241,7 +248,7 @@ static void ehea_update_bcmc_registrations(void)
 		}
 
 	if (num_registrations) {
-		arr = kzalloc(num_registrations * sizeof(*arr), GFP_KERNEL);
+		arr = kzalloc(num_registrations * sizeof(*arr), GFP_ATOMIC);
 		if (!arr)
 			return;  /* Keep the existing array */
 	} else
@@ -301,7 +308,7 @@ static struct net_device_stats *ehea_get_stats(struct net_device *dev)
 
 	memset(stats, 0, sizeof(*stats));
 
-	cb2 = kzalloc(PAGE_SIZE, GFP_KERNEL);
+	cb2 = kzalloc(PAGE_SIZE, GFP_ATOMIC);
 	if (!cb2) {
 		ehea_error("no mem for cb2");
 		goto out;
@@ -587,7 +594,7 @@ static int ehea_treat_poll_error(struct ehea_port_res *pr, int rq,
 				   "Resetting port.", pr->qp->init_attr.qp_nr);
 			ehea_dump(cqe, sizeof(*cqe), "CQE");
 		}
-		schedule_work(&pr->port->reset_task);
+		ehea_schedule_port_reset(pr->port);
 		return 1;
 	}
 
@@ -616,7 +623,7 @@ static int get_skb_hdr(struct sk_buff *skb, void **iphdr,
 	*tcph = tcp_hdr(skb);
 
 	/* check if ip header and tcp header are complete */
-	if (iph->tot_len < ip_len + tcp_hdrlen(skb))
+	if (ntohs(iph->tot_len) < ip_len + tcp_hdrlen(skb))
 		return -1;
 
 	*hdr_flags = LRO_IPV4 | LRO_TCP;
@@ -765,7 +772,7 @@ static struct ehea_cqe *ehea_proc_cqes(struct ehea_port_res *pr, int my_quota)
 			ehea_error("Send Completion Error: Resetting port");
 			if (netif_msg_tx_err(pr->port))
 				ehea_dump(cqe, sizeof(*cqe), "Send CQE");
-			schedule_work(&pr->port->reset_task);
+			ehea_schedule_port_reset(pr->port);
 			break;
 		}
 
@@ -885,7 +892,7 @@ static irqreturn_t ehea_qp_aff_irq_handler(int irq, void *param)
 		eqe = ehea_poll_eq(port->qp_eq);
 	}
 
-	schedule_work(&port->reset_task);
+	ehea_schedule_port_reset(port);
 
 	return IRQ_HANDLED;
 }
@@ -1763,7 +1770,7 @@ static int ehea_set_mac_addr(struct net_device *dev, void *sa)
 
 	memcpy(dev->dev_addr, mac_addr->sa_data, dev->addr_len);
 
-	mutex_lock(&ehea_bcmc_regs.lock);
+	spin_lock(&ehea_bcmc_regs.lock);
 
 	/* Deregister old MAC in pHYP */
 	if (port->state == EHEA_PORT_UP) {
@@ -1785,7 +1792,7 @@ static int ehea_set_mac_addr(struct net_device *dev, void *sa)
 
 out_upregs:
 	ehea_update_bcmc_registrations();
-	mutex_unlock(&ehea_bcmc_regs.lock);
+	spin_unlock(&ehea_bcmc_regs.lock);
 out_free:
 	kfree(cb0);
 out:
@@ -1947,7 +1954,7 @@ static void ehea_set_multicast_list(struct net_device *dev)
 	}
 	ehea_promiscuous(dev, 0);
 
-	mutex_lock(&ehea_bcmc_regs.lock);
+	spin_lock(&ehea_bcmc_regs.lock);
 
 	if (dev->flags & IFF_ALLMULTI) {
 		ehea_allmulti(dev, 1);
@@ -1978,7 +1985,7 @@ static void ehea_set_multicast_list(struct net_device *dev)
 	}
 out:
 	ehea_update_bcmc_registrations();
-	mutex_unlock(&ehea_bcmc_regs.lock);
+	spin_unlock(&ehea_bcmc_regs.lock);
 	return;
 }
 
@@ -2497,7 +2504,7 @@ static int ehea_up(struct net_device *dev)
 		}
 	}
 
-	mutex_lock(&ehea_bcmc_regs.lock);
+	spin_lock(&ehea_bcmc_regs.lock);
 
 	ret = ehea_broadcast_reg_helper(port, H_REG_BCMC);
 	if (ret) {
@@ -2520,7 +2527,7 @@ out:
 		ehea_info("Failed starting %s. ret=%i", dev->name, ret);
 
 	ehea_update_bcmc_registrations();
-	mutex_unlock(&ehea_bcmc_regs.lock);
+	spin_unlock(&ehea_bcmc_regs.lock);
 
 	ehea_update_firmware_handles();
 	mutex_unlock(&ehea_fw_handles.lock);
@@ -2575,7 +2582,7 @@ static int ehea_down(struct net_device *dev)
 
 	mutex_lock(&ehea_fw_handles.lock);
 
-	mutex_lock(&ehea_bcmc_regs.lock);
+	spin_lock(&ehea_bcmc_regs.lock);
 	ehea_drop_multicast_list(dev);
 	ehea_broadcast_reg_helper(port, H_DEREG_BCMC);
 
@@ -2584,7 +2591,7 @@ static int ehea_down(struct net_device *dev)
 	port->state = EHEA_PORT_DOWN;
 
 	ehea_update_bcmc_registrations();
-	mutex_unlock(&ehea_bcmc_regs.lock);
+	spin_unlock(&ehea_bcmc_regs.lock);
 
 	ret = ehea_clean_all_portres(port);
 	if (ret)
@@ -2605,13 +2612,14 @@ static int ehea_stop(struct net_device *dev)
 	if (netif_msg_ifdown(port))
 		ehea_info("disabling port %s", dev->name);
 
+	set_bit(__EHEA_DISABLE_PORT_RESET, &port->flags);
 	cancel_work_sync(&port->reset_task);
-
 	mutex_lock(&port->port_lock);
 	netif_stop_queue(dev);
 	port_napi_disable(port);
 	ret = ehea_down(dev);
 	mutex_unlock(&port->port_lock);
+	clear_bit(__EHEA_DISABLE_PORT_RESET, &port->flags);
 	return ret;
 }
 
@@ -2941,7 +2949,7 @@ static void ehea_tx_watchdog(struct net_device *dev)
 
 	if (netif_carrier_ok(dev) &&
 	    !test_bit(__EHEA_STOP_XFER, &ehea_driver_flags))
-		schedule_work(&port->reset_task);
+		ehea_schedule_port_reset(port);
 }
 
 int ehea_sense_adapter_attr(struct ehea_adapter *adapter)
@@ -3590,7 +3598,7 @@ int __init ehea_module_init(void)
 	memset(&ehea_bcmc_regs, 0, sizeof(ehea_bcmc_regs));
 
 	mutex_init(&ehea_fw_handles.lock);
-	mutex_init(&ehea_bcmc_regs.lock);
+	spin_lock_init(&ehea_bcmc_regs.lock);
 
 	ret = check_module_parm();
 	if (ret)

drivers/net/forcedeth.c

@@ -4194,12 +4194,23 @@ static int nv_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 
 	netif_carrier_off(dev);
 	if (netif_running(dev)) {
+		unsigned long flags;
+
 		nv_disable_irq(dev);
 		netif_tx_lock_bh(dev);
-		spin_lock(&np->lock);
+		/* with plain spinlock lockdep complains */
+		spin_lock_irqsave(&np->lock, flags);
 		/* stop engines */
+		/* FIXME:
+		 * this can take some time, and interrupts are disabled
+		 * due to spin_lock_irqsave, but let's hope no daemon
+		 * is going to change the settings very often...
+		 * Worst case:
+		 * NV_RXSTOP_DELAY1MAX + NV_TXSTOP_DELAY1MAX
+		 * + some minor delays, which is up to a second approximately
+		 */
 		nv_stop_rxtx(dev);
-		spin_unlock(&np->lock);
+		spin_unlock_irqrestore(&np->lock, flags);
 		netif_tx_unlock_bh(dev);
 	}
 

drivers/net/fs_enet/mac-fcc.c

@@ -463,6 +463,9 @@ static void restart(struct net_device *dev)
 	else
 		C32(fccp, fcc_fpsmr, FCC_PSMR_FDE | FCC_PSMR_LPB);
 
+	/* Restore multicast and promiscuous settings */
+	set_multicast_list(dev);
+
 	S32(fccp, fcc_gfmr, FCC_GFMR_ENR | FCC_GFMR_ENT);
 }
 

drivers/net/ibm_newemac/core.c

@@ -1636,6 +1636,12 @@ static int emac_poll_rx(void *param, int budget)
 			goto next;
 		}
 
+		if (len < ETH_HLEN) {
+			++dev->estats.rx_dropped_stack;
+			emac_recycle_rx_skb(dev, slot, len);
+			goto next;
+		}
+
 		if (len && len < EMAC_RX_COPY_THRESH) {
 			struct sk_buff *copy_skb =
 			    alloc_skb(len + EMAC_RX_SKB_HEADROOM + 2, GFP_ATOMIC);
@@ -2719,6 +2725,8 @@ static int __devinit emac_probe(struct of_device *ofdev,
 	/* Clean rings */
 	memset(dev->tx_desc, 0, NUM_TX_BUFF * sizeof(struct mal_descriptor));
 	memset(dev->rx_desc, 0, NUM_RX_BUFF * sizeof(struct mal_descriptor));
+	memset(dev->tx_skb, 0, NUM_TX_BUFF * sizeof(struct sk_buff *));
+	memset(dev->rx_skb, 0, NUM_RX_BUFF * sizeof(struct sk_buff *));
 
 	/* Attach to ZMII, if needed */
 	if (emac_has_feature(dev, EMAC_FTR_HAS_ZMII) &&

drivers/net/irda/nsc-ircc.c

@@ -152,6 +152,7 @@ static chipio_t pnp_info;
 static const struct pnp_device_id nsc_ircc_pnp_table[] = {
 	{ .id = "NSC6001", .driver_data = 0 },
 	{ .id = "IBM0071", .driver_data = 0 },
+	{ .id = "HWPC224", .driver_data = 0 },
 	{ }
 };
 

drivers/net/irda/via-ircc.c

@@ -1546,6 +1546,7 @@ static int via_ircc_net_open(struct net_device *dev)
 			IRDA_WARNING("%s, unable to allocate dma2=%d\n",
 				     driver_name, self->io.dma2);
 			free_irq(self->io.irq, self);
+			free_dma(self->io.dma);
 			return -EAGAIN;
 		}
 	}
@@ -1606,6 +1607,8 @@ static int via_ircc_net_close(struct net_device *dev)
 	EnAllInt(iobase, OFF);
 	free_irq(self->io.irq, dev);
 	free_dma(self->io.dma);
+	if (self->io.dma2 != self->io.dma)
+		free_dma(self->io.dma2);
 
 	return 0;
 }

drivers/net/pasemi_mac.c

@@ -277,7 +277,7 @@ static int get_skb_hdr(struct sk_buff *skb, void **iphdr,
 	*tcph = tcp_hdr(skb);
 
 	/* check if ip header and tcp header are complete */
-	if (iph->tot_len < ip_len + tcp_hdrlen(skb))
+	if (ntohs(iph->tot_len) < ip_len + tcp_hdrlen(skb))
 		return -1;
 
 	*hdr_flags = LRO_IPV4 | LRO_TCP;

drivers/net/tun.c

@@ -602,6 +602,12 @@ static int tun_set_iff(struct net *net, struct file *file, struct ifreq *ifr)
 	tun->attached = 1;
 	get_net(dev_net(tun->dev));
 
+	/* Make sure persistent devices do not get stuck in
+	 * xoff state.
+	 */
+	if (netif_running(tun->dev))
+		netif_wake_queue(tun->dev);
+
 	strcpy(ifr->ifr_name, tun->dev->name);
 	return 0;
 

drivers/net/wan/hdlc_fr.c

@@ -1008,6 +1008,7 @@ static int fr_rx(struct sk_buff *skb)
 		stats->rx_bytes += skb->len;
 		if (pvc->state.becn)
 			stats->rx_compressed++;
+		skb->dev = dev;
 		netif_rx(skb);
 		return NET_RX_SUCCESS;
 	} else {

drivers/net/wireless/hostap/hostap_cs.c

@@ -777,8 +777,10 @@ static int hostap_cs_suspend(struct pcmcia_device *link)
 	int dev_open = 0;
 	struct hostap_interface *iface = NULL;
 
-	if (dev)
+	if (!dev)
-		iface = netdev_priv(dev);
+		return -ENODEV;
+
+	iface = netdev_priv(dev);
 
 	PDEBUG(DEBUG_EXTRA, "%s: CS_EVENT_PM_SUSPEND\n", dev_info);
 	if (iface && iface->local)
@@ -798,8 +800,10 @@ static int hostap_cs_resume(struct pcmcia_device *link)
 	int dev_open = 0;
 	struct hostap_interface *iface = NULL;
 
-	if (dev)
+	if (!dev)
-		iface = netdev_priv(dev);
+		return -ENODEV;
+
+	iface = netdev_priv(dev);
 
 	PDEBUG(DEBUG_EXTRA, "%s: CS_EVENT_PM_RESUME\n", dev_info);
 

drivers/net/wireless/iwlwifi/iwl-3945.c

@@ -449,7 +449,7 @@ static void iwl3945_dbg_report_frame(struct iwl3945_priv *priv,
 
 	if (print_summary) {
 		char *title;
-		u32 rate;
+		int rate;
 
 		if (hundred)
 			title = "100Frames";
@@ -487,7 +487,7 @@ static void iwl3945_dbg_report_frame(struct iwl3945_priv *priv,
 		 *    but you can hack it to show more, if you'd like to. */
 		if (dataframe)
 			IWL_DEBUG_RX("%s: mhd=0x%04x, dst=0x%02x, "
-				     "len=%u, rssi=%d, chnl=%d, rate=%u, \n",
+				     "len=%u, rssi=%d, chnl=%d, rate=%d, \n",
 				     title, fc, header->addr1[5],
 				     length, rssi, channel, rate);
 		else {
@@ -588,8 +588,12 @@ static void iwl3945_add_radiotap(struct iwl3945_priv *priv,
 
 	if (rate == -1)
 		iwl3945_rt->rt_rate = 0;
-	else
+	else {
+		if (stats->band == IEEE80211_BAND_5GHZ)
+			rate += IWL_FIRST_OFDM_RATE;
+
 		iwl3945_rt->rt_rate = iwl3945_rates[rate].ieee;
+	}
 
 	/* antenna number */
 	antenna = phy_flags_hw & RX_RES_PHY_FLAGS_ANTENNA_MSK;

drivers/net/wireless/iwlwifi/iwl-4965.c

@@ -3528,8 +3528,12 @@ static void iwl4965_add_radiotap(struct iwl_priv *priv,
 
 	if (rate == -1)
 		iwl4965_rt->rt_rate = 0;
-	else
+	else {
+		if (stats->band == IEEE80211_BAND_5GHZ)
+			rate += IWL_FIRST_OFDM_RATE;
+
 		iwl4965_rt->rt_rate = iwl4965_rates[rate].ieee;
+	}
 
 	/*
 	 * "antenna number"

drivers/net/wireless/iwlwifi/iwl3945-base.c

@@ -6687,7 +6687,8 @@ static int iwl3945_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb,
 
 	if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR) {
 		IWL_DEBUG_MAC80211("leave - monitor\n");
-		return -1;
+		dev_kfree_skb_any(skb);
+		return 0;
 	}
 
 	IWL_DEBUG_TX("dev->xmit(%d bytes) at rate 0x%02x\n", skb->len,

drivers/net/wireless/iwlwifi/iwl4965-base.c

@@ -6237,7 +6237,8 @@ static int iwl4965_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb,
 
 	if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR) {
 		IWL_DEBUG_MAC80211("leave - monitor\n");
-		return -1;
+		dev_kfree_skb_any(skb);
+		return 0;
 	}
 
 	IWL_DEBUG_TX("dev->xmit(%d bytes) at rate 0x%02x\n", skb->len,

drivers/net/wireless/libertas/if_usb.c

@@ -925,6 +925,7 @@ static struct usb_driver if_usb_driver = {
 	.id_table = if_usb_table,
 	.suspend = if_usb_suspend,
 	.resume = if_usb_resume,
+	.reset_resume = if_usb_resume,
 };
 
 static int __init if_usb_init_module(void)

drivers/net/wireless/libertas/scan.c

@@ -567,11 +567,11 @@ static int lbs_process_bss(struct bss_descriptor *bss,
 	pos += 8;
 
 	/* beacon interval is 2 bytes long */
-	bss->beaconperiod = le16_to_cpup((void *) pos);
+	bss->beaconperiod = get_unaligned_le16(pos);
 	pos += 2;
 
 	/* capability information is 2 bytes long */
-	bss->capability = le16_to_cpup((void *) pos);
+	bss->capability = get_unaligned_le16(pos);
 	lbs_deb_scan("process_bss: capabilities 0x%04x\n", bss->capability);
 	pos += 2;
 

drivers/net/wireless/rt2x00/rt2400pci.c

@@ -731,6 +731,17 @@ static int rt2400pci_init_registers(struct rt2x00_dev *rt2x00dev)
 			   (rt2x00dev->rx->data_size / 128));
 	rt2x00pci_register_write(rt2x00dev, CSR9, reg);
 
+	rt2x00pci_register_read(rt2x00dev, CSR14, &reg);
+	rt2x00_set_field32(&reg, CSR14_TSF_COUNT, 0);
+	rt2x00_set_field32(&reg, CSR14_TSF_SYNC, 0);
+	rt2x00_set_field32(&reg, CSR14_TBCN, 0);
+	rt2x00_set_field32(&reg, CSR14_TCFP, 0);
+	rt2x00_set_field32(&reg, CSR14_TATIMW, 0);
+	rt2x00_set_field32(&reg, CSR14_BEACON_GEN, 0);
+	rt2x00_set_field32(&reg, CSR14_CFP_COUNT_PRELOAD, 0);
+	rt2x00_set_field32(&reg, CSR14_TBCM_PRELOAD, 0);
+	rt2x00pci_register_write(rt2x00dev, CSR14, reg);
+
 	rt2x00pci_register_write(rt2x00dev, CNT3, 0x3f080000);
 
 	rt2x00pci_register_read(rt2x00dev, ARCSR0, &reg);

drivers/net/wireless/rt2x00/rt2500pci.c

@@ -824,6 +824,17 @@ static int rt2500pci_init_registers(struct rt2x00_dev *rt2x00dev)
 	rt2x00_set_field32(&reg, CSR11_CW_SELECT, 0);
 	rt2x00pci_register_write(rt2x00dev, CSR11, reg);
 
+	rt2x00pci_register_read(rt2x00dev, CSR14, &reg);
+	rt2x00_set_field32(&reg, CSR14_TSF_COUNT, 0);
+	rt2x00_set_field32(&reg, CSR14_TSF_SYNC, 0);
+	rt2x00_set_field32(&reg, CSR14_TBCN, 0);
+	rt2x00_set_field32(&reg, CSR14_TCFP, 0);
+	rt2x00_set_field32(&reg, CSR14_TATIMW, 0);
+	rt2x00_set_field32(&reg, CSR14_BEACON_GEN, 0);
+	rt2x00_set_field32(&reg, CSR14_CFP_COUNT_PRELOAD, 0);
+	rt2x00_set_field32(&reg, CSR14_TBCM_PRELOAD, 0);
+	rt2x00pci_register_write(rt2x00dev, CSR14, reg);
+
 	rt2x00pci_register_write(rt2x00dev, CNT3, 0);
 
 	rt2x00pci_register_read(rt2x00dev, TXCSR8, &reg);

drivers/net/wireless/rt2x00/rt2500usb.c

@@ -801,6 +801,13 @@ static int rt2500usb_init_registers(struct rt2x00_dev *rt2x00dev)
 	rt2x00_set_field16(&reg, TXRX_CSR8_BBP_ID1_VALID, 0);
 	rt2500usb_register_write(rt2x00dev, TXRX_CSR8, reg);
 
+	rt2500usb_register_read(rt2x00dev, TXRX_CSR19, &reg);
+	rt2x00_set_field16(&reg, TXRX_CSR19_TSF_COUNT, 0);
+	rt2x00_set_field16(&reg, TXRX_CSR19_TSF_SYNC, 0);
+	rt2x00_set_field16(&reg, TXRX_CSR19_TBCN, 0);
+	rt2x00_set_field16(&reg, TXRX_CSR19_BEACON_GEN, 0);
+	rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
+
 	rt2500usb_register_write(rt2x00dev, TXRX_CSR21, 0xe78f);
 	rt2500usb_register_write(rt2x00dev, MAC_CSR9, 0xff1d);
 

drivers/net/wireless/rt2x00/rt61pci.c

@@ -1201,6 +1201,15 @@ static int rt61pci_init_registers(struct rt2x00_dev *rt2x00dev)
 	rt2x00_set_field32(&reg, TXRX_CSR8_ACK_CTS_54MBS, 42);
 	rt2x00pci_register_write(rt2x00dev, TXRX_CSR8, reg);
 
+	rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, &reg);
+	rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_INTERVAL, 0);
+	rt2x00_set_field32(&reg, TXRX_CSR9_TSF_TICKING, 0);
+	rt2x00_set_field32(&reg, TXRX_CSR9_TSF_SYNC, 0);
+	rt2x00_set_field32(&reg, TXRX_CSR9_TBTT_ENABLE, 0);
+	rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_GEN, 0);
+	rt2x00_set_field32(&reg, TXRX_CSR9_TIMESTAMP_COMPENSATE, 0);
+	rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg);
+
 	rt2x00pci_register_write(rt2x00dev, TXRX_CSR15, 0x0000000f);
 
 	rt2x00pci_register_write(rt2x00dev, MAC_CSR6, 0x00000fff);

drivers/net/wireless/rt2x00/rt73usb.c

@@ -1006,6 +1006,15 @@ static int rt73usb_init_registers(struct rt2x00_dev *rt2x00dev)
 	rt2x00_set_field32(&reg, TXRX_CSR8_ACK_CTS_54MBS, 42);
 	rt73usb_register_write(rt2x00dev, TXRX_CSR8, reg);
 
+	rt73usb_register_read(rt2x00dev, TXRX_CSR9, &reg);
+	rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_INTERVAL, 0);
+	rt2x00_set_field32(&reg, TXRX_CSR9_TSF_TICKING, 0);
+	rt2x00_set_field32(&reg, TXRX_CSR9_TSF_SYNC, 0);
+	rt2x00_set_field32(&reg, TXRX_CSR9_TBTT_ENABLE, 0);
+	rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_GEN, 0);
+	rt2x00_set_field32(&reg, TXRX_CSR9_TIMESTAMP_COMPENSATE, 0);
+	rt73usb_register_write(rt2x00dev, TXRX_CSR9, reg);
+
 	rt73usb_register_write(rt2x00dev, TXRX_CSR15, 0x0000000f);
 
 	rt73usb_register_read(rt2x00dev, MAC_CSR6, &reg);

drivers/net/wireless/zd1211rw/zd_mac.c

@@ -765,6 +765,7 @@ static void zd_op_remove_interface(struct ieee80211_hw *hw,
 {
 	struct zd_mac *mac = zd_hw_mac(hw);
 	mac->type = IEEE80211_IF_TYPE_INVALID;
+	zd_set_beacon_interval(&mac->chip, 0);
 	zd_write_mac_addr(&mac->chip, NULL);
 }
 

drivers/net/wireless/zd1211rw/zd_usb.c

@@ -64,6 +64,7 @@ static struct usb_device_id usb_ids[] = {
 	{ USB_DEVICE(0x079b, 0x0062), .driver_info = DEVICE_ZD1211B },
 	{ USB_DEVICE(0x1582, 0x6003), .driver_info = DEVICE_ZD1211B },
 	{ USB_DEVICE(0x050d, 0x705c), .driver_info = DEVICE_ZD1211B },
+	{ USB_DEVICE(0x083a, 0xe506), .driver_info = DEVICE_ZD1211B },
 	{ USB_DEVICE(0x083a, 0x4505), .driver_info = DEVICE_ZD1211B },
 	{ USB_DEVICE(0x0471, 0x1236), .driver_info = DEVICE_ZD1211B },
 	{ USB_DEVICE(0x13b1, 0x0024), .driver_info = DEVICE_ZD1211B },

drivers/rapidio/rio-driver.c

@@ -101,8 +101,8 @@ static int rio_device_probe(struct device *dev)
 		if (error >= 0) {
 			rdev->driver = rdrv;
 			error = 0;
+		} else
 			rio_dev_put(rdev);
-		}
 	}
 	return error;
 }

drivers/rtc/rtc-fm3130.c

@@ -55,7 +55,7 @@ struct fm3130 {
 	int			alarm;
 };
 static const struct i2c_device_id fm3130_id[] = {
-	{ "fm3130-rtc", 0 },
+	{ "fm3130", 0 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, fm3130_id);

drivers/rtc/rtc-pcf8563.c

@@ -302,6 +302,7 @@ static int pcf8563_remove(struct i2c_client *client)
 
 static const struct i2c_device_id pcf8563_id[] = {
 	{ "pcf8563", 0 },
+	{ "rtc8564", 0 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, pcf8563_id);

drivers/scsi/ipr.c

@@ -71,6 +71,7 @@
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/libata.h>
+#include <linux/hdreg.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/processor.h>
@@ -4913,8 +4914,11 @@ static int ipr_ioctl(struct scsi_device *sdev, int cmd, void __user *arg)
 	struct ipr_resource_entry *res;
 
 	res = (struct ipr_resource_entry *)sdev->hostdata;
-	if (res && ipr_is_gata(res))
+	if (res && ipr_is_gata(res)) {
+		if (cmd == HDIO_GET_IDENTITY)
+			return -ENOTTY;
 		return ata_scsi_ioctl(sdev, cmd, arg);
+	}
 
 	return -EINVAL;
 }

drivers/scsi/scsi_lib.c

@@ -207,6 +207,15 @@ int scsi_execute(struct scsi_device *sdev, const unsigned char *cmd,
 	 */
 	blk_execute_rq(req->q, NULL, req, 1);
 
+	/*
+	 * Some devices (USB mass-storage in particular) may transfer
+	 * garbage data together with a residue indicating that the data
+	 * is invalid.  Prevent the garbage from being misinterpreted
+	 * and prevent security leaks by zeroing out the excess data.
+	 */
+	if (unlikely(req->data_len > 0 && req->data_len <= bufflen))
+		memset(buffer + (bufflen - req->data_len), 0, req->data_len);
+
 	ret = req->errors;
  out:
 	blk_put_request(req);

drivers/serial/8250.c

@@ -2623,6 +2623,9 @@ static struct console serial8250_console = {
 
 static int __init serial8250_console_init(void)
 {
+	if (nr_uarts > UART_NR)
+		nr_uarts = UART_NR;
+
 	serial8250_isa_init_ports();
 	register_console(&serial8250_console);
 	return 0;

drivers/ssb/driver_pcicore.c

@@ -537,6 +537,13 @@ int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc,
 	int err = 0;
 	u32 tmp;
 
+	if (dev->bus->bustype != SSB_BUSTYPE_PCI) {
+		/* This SSB device is not on a PCI host-bus. So the IRQs are
+		 * not routed through the PCI core.
+		 * So we must not enable routing through the PCI core. */
+		goto out;
+	}
+
 	if (!pdev)
 		goto out;
 	bus = pdev->bus;

drivers/usb/core/hcd.c

@@ -924,6 +924,15 @@ static int register_root_hub(struct usb_hcd *hcd)
 	return retval;
 }
 
+void usb_enable_root_hub_irq (struct usb_bus *bus)
+{
+	struct usb_hcd *hcd;
+
+	hcd = container_of (bus, struct usb_hcd, self);
+	if (hcd->driver->hub_irq_enable && hcd->state != HC_STATE_HALT)
+		hcd->driver->hub_irq_enable (hcd);
+}
+
 
 /*-------------------------------------------------------------------------*/
 

drivers/usb/core/hcd.h

@@ -210,6 +210,8 @@ struct hc_driver {
 	int	(*bus_suspend)(struct usb_hcd *);
 	int	(*bus_resume)(struct usb_hcd *);
 	int	(*start_port_reset)(struct usb_hcd *, unsigned port_num);
+	void	(*hub_irq_enable)(struct usb_hcd *);
+		/* Needed only if port-change IRQs are level-triggered */
 
 		/* force handover of high-speed port to full-speed companion */
 	void	(*relinquish_port)(struct usb_hcd *, int);

drivers/usb/core/hub.c

@@ -2073,6 +2073,8 @@ int usb_port_resume(struct usb_device *udev)
 	}
 
 	clear_bit(port1, hub->busy_bits);
+	if (!hub->hdev->parent && !hub->busy_bits[0])
+		usb_enable_root_hub_irq(hub->hdev->bus);
 
 	if (status == 0)
 		status = finish_port_resume(udev);
@@ -3002,6 +3004,11 @@ static void hub_events(void)
 
 		hub->activating = 0;
 
+		/* If this is a root hub, tell the HCD it's okay to
+		 * re-enable port-change interrupts now. */
+		if (!hdev->parent && !hub->busy_bits[0])
+			usb_enable_root_hub_irq(hdev->bus);
+
 loop_autopm:
 		/* Allow autosuspend if we're not going to run again */
 		if (list_empty(&hub->event_list))
@@ -3227,6 +3234,8 @@ int usb_reset_device(struct usb_device *udev)
 			break;
 	}
 	clear_bit(port1, parent_hub->busy_bits);
+	if (!parent_hdev->parent && !parent_hub->busy_bits[0])
+		usb_enable_root_hub_irq(parent_hdev->bus);
 
 	if (ret < 0)
 		goto re_enumerate;

drivers/usb/host/ohci-at91.c

@@ -261,6 +261,7 @@ static const struct hc_driver ohci_at91_hc_driver = {
 	 */
 	.hub_status_data =	ohci_hub_status_data,
 	.hub_control =		ohci_hub_control,
+	.hub_irq_enable =	ohci_rhsc_enable,
 #ifdef CONFIG_PM
 	.bus_suspend =		ohci_bus_suspend,
 	.bus_resume =		ohci_bus_resume,

drivers/usb/host/ohci-au1xxx.c

@@ -8,7 +8,7 @@
  * Bus Glue for AMD Alchemy Au1xxx
  *
  * Written by Christopher Hoover <ch@hpl.hp.com>
- * Based on fragments of previous driver by Rusell King et al.
+ * Based on fragments of previous driver by Russell King et al.
  *
  * Modified for LH7A404 from ohci-sa1111.c
  *  by Durgesh Pattamatta <pattamattad@sharpsec.com>
@@ -288,6 +288,7 @@ static const struct hc_driver ohci_au1xxx_hc_driver = {
 	 */
 	.hub_status_data =	ohci_hub_status_data,
 	.hub_control =		ohci_hub_control,
+	.hub_irq_enable =	ohci_rhsc_enable,
 #ifdef	CONFIG_PM
 	.bus_suspend =		ohci_bus_suspend,
 	.bus_resume =		ohci_bus_resume,

drivers/usb/host/ohci-ep93xx.c

@@ -135,6 +135,7 @@ static struct hc_driver ohci_ep93xx_hc_driver = {
 	.get_frame_number	= ohci_get_frame,
 	.hub_status_data	= ohci_hub_status_data,
 	.hub_control		= ohci_hub_control,
+	.hub_irq_enable		= ohci_rhsc_enable,
 #ifdef CONFIG_PM
 	.bus_suspend		= ohci_bus_suspend,
 	.bus_resume		= ohci_bus_resume,

drivers/usb/host/ohci-hub.c

@@ -36,6 +36,18 @@
 
 /*-------------------------------------------------------------------------*/
 
+/* hcd->hub_irq_enable() */
+static void ohci_rhsc_enable (struct usb_hcd *hcd)
+{
+	struct ohci_hcd		*ohci = hcd_to_ohci (hcd);
+
+	spin_lock_irq(&ohci->lock);
+	if (!ohci->autostop)
+		del_timer(&hcd->rh_timer);	/* Prevent next poll */
+	ohci_writel(ohci, OHCI_INTR_RHSC, &ohci->regs->intrenable);
+	spin_unlock_irq(&ohci->lock);
+}
+
 #define OHCI_SCHED_ENABLES \
 	(OHCI_CTRL_CLE|OHCI_CTRL_BLE|OHCI_CTRL_PLE|OHCI_CTRL_IE)
 
@@ -362,28 +374,18 @@ static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed,
 		int any_connected)
 {
 	int	poll_rh = 1;
-	int	rhsc;
 
-	rhsc = ohci_readl(ohci, &ohci->regs->intrenable) & OHCI_INTR_RHSC;
 	switch (ohci->hc_control & OHCI_CTRL_HCFS) {
 
 	case OHCI_USB_OPER:
-		/* If no status changes are pending, enable status-change
+		/* keep on polling until we know a device is connected
-		 * interrupts.
+		 * and RHSC is enabled */
-		 */
-		if (!rhsc && !changed) {
-			rhsc = OHCI_INTR_RHSC;
-			ohci_writel(ohci, rhsc, &ohci->regs->intrenable);
-		}
-
-		/* Keep on polling until we know a device is connected
-		 * and RHSC is enabled, or until we autostop.
-		 */
 		if (!ohci->autostop) {
 			if (any_connected ||
 					!device_may_wakeup(&ohci_to_hcd(ohci)
 						->self.root_hub->dev)) {
-				if (rhsc)
+				if (ohci_readl(ohci, &ohci->regs->intrenable) &
+						OHCI_INTR_RHSC)
 					poll_rh = 0;
 			} else {
 				ohci->autostop = 1;
@@ -396,13 +398,12 @@ static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed,
 				ohci->autostop = 0;
 				ohci->next_statechange = jiffies +
 						STATECHANGE_DELAY;
-			} else if (rhsc && time_after_eq(jiffies,
+			} else if (time_after_eq(jiffies,
 						ohci->next_statechange)
 					&& !ohci->ed_rm_list
 					&& !(ohci->hc_control &
 						OHCI_SCHED_ENABLES)) {
 				ohci_rh_suspend(ohci, 1);
-				poll_rh = 0;
 			}
 		}
 		break;
@@ -416,12 +417,6 @@ static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed,
 			else
 				usb_hcd_resume_root_hub(ohci_to_hcd(ohci));
 		} else {
-			if (!rhsc && (ohci->autostop ||
-					ohci_to_hcd(ohci)->self.root_hub->
-						do_remote_wakeup))
-				ohci_writel(ohci, OHCI_INTR_RHSC,
-						&ohci->regs->intrenable);
-
 			/* everything is idle, no need for polling */
 			poll_rh = 0;
 		}
@@ -443,16 +438,12 @@ static inline int ohci_rh_resume(struct ohci_hcd *ohci)
 static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed,
 		int any_connected)
 {
-	/* If RHSC is enabled, don't poll */
+	int	poll_rh = 1;
-	if (ohci_readl(ohci, &ohci->regs->intrenable) & OHCI_INTR_RHSC)
-		return 0;
 
-	/* If no status changes are pending, enable status-change interrupts */
+	/* keep on polling until RHSC is enabled */
-	if (!changed) {
+	if (ohci_readl(ohci, &ohci->regs->intrenable) & OHCI_INTR_RHSC)
-		ohci_writel(ohci, OHCI_INTR_RHSC, &ohci->regs->intrenable);
+		poll_rh = 0;
-		return 0;
+	return poll_rh;
-	}
-	return 1;
 }
 
 #endif	/* CONFIG_PM */

drivers/usb/host/ohci-lh7a404.c

@@ -8,7 +8,7 @@
  * Bus Glue for Sharp LH7A404
  *
  * Written by Christopher Hoover <ch@hpl.hp.com>
- * Based on fragments of previous driver by Rusell King et al.
+ * Based on fragments of previous driver by Russell King et al.
  *
  * Modified for LH7A404 from ohci-sa1111.c
  *  by Durgesh Pattamatta <pattamattad@sharpsec.com>
@@ -193,6 +193,7 @@ static const struct hc_driver ohci_lh7a404_hc_driver = {
 	 */
 	.hub_status_data =	ohci_hub_status_data,
 	.hub_control =		ohci_hub_control,
+	.hub_irq_enable =	ohci_rhsc_enable,
 #ifdef	CONFIG_PM
 	.bus_suspend =		ohci_bus_suspend,
 	.bus_resume =		ohci_bus_resume,

drivers/usb/host/ohci-omap.c

@@ -466,6 +466,7 @@ static const struct hc_driver ohci_omap_hc_driver = {
 	 */
 	.hub_status_data =	ohci_hub_status_data,
 	.hub_control =		ohci_hub_control,
+	.hub_irq_enable =	ohci_rhsc_enable,
 #ifdef	CONFIG_PM
 	.bus_suspend =		ohci_bus_suspend,
 	.bus_resume =		ohci_bus_resume,

drivers/usb/host/ohci-pci.c

@@ -327,6 +327,7 @@ static const struct hc_driver ohci_pci_hc_driver = {
 	 */
 	.hub_status_data =	ohci_hub_status_data,
 	.hub_control =		ohci_hub_control,
+	.hub_irq_enable =	ohci_rhsc_enable,
 #ifdef	CONFIG_PM
 	.bus_suspend =		ohci_bus_suspend,
 	.bus_resume =		ohci_bus_resume,

drivers/usb/host/ohci-pnx4008.c

@@ -280,6 +280,7 @@ static const struct hc_driver ohci_pnx4008_hc_driver = {
 	 */
 	.hub_status_data = ohci_hub_status_data,
 	.hub_control = ohci_hub_control,
+	.hub_irq_enable = ohci_rhsc_enable,
 #ifdef	CONFIG_PM
 	.bus_suspend = ohci_bus_suspend,
 	.bus_resume = ohci_bus_resume,

drivers/usb/host/ohci-pnx8550.c

@@ -201,6 +201,7 @@ static const struct hc_driver ohci_pnx8550_hc_driver = {
 	 */
 	.hub_status_data =	ohci_hub_status_data,
 	.hub_control =		ohci_hub_control,
+	.hub_irq_enable =	ohci_rhsc_enable,
 #ifdef	CONFIG_PM
 	.bus_suspend =		ohci_bus_suspend,
 	.bus_resume =		ohci_bus_resume,

drivers/usb/host/ohci-ppc-of.c

@@ -72,6 +72,7 @@ static const struct hc_driver ohci_ppc_of_hc_driver = {
 	 */
 	.hub_status_data =	ohci_hub_status_data,
 	.hub_control =		ohci_hub_control,
+	.hub_irq_enable =	ohci_rhsc_enable,
 #ifdef	CONFIG_PM
 	.bus_suspend =		ohci_bus_suspend,
 	.bus_resume =		ohci_bus_resume,

drivers/usb/host/ohci-ppc-soc.c

@@ -172,6 +172,7 @@ static const struct hc_driver ohci_ppc_soc_hc_driver = {
 	 */
 	.hub_status_data =	ohci_hub_status_data,
 	.hub_control =		ohci_hub_control,
+	.hub_irq_enable =	ohci_rhsc_enable,
 #ifdef	CONFIG_PM
 	.bus_suspend =		ohci_bus_suspend,
 	.bus_resume =		ohci_bus_resume,

drivers/usb/host/ohci-ps3.c

@@ -68,6 +68,7 @@ static const struct hc_driver ps3_ohci_hc_driver = {
 	.get_frame_number	= ohci_get_frame,
 	.hub_status_data	= ohci_hub_status_data,
 	.hub_control		= ohci_hub_control,
+	.hub_irq_enable		= ohci_rhsc_enable,
 	.start_port_reset	= ohci_start_port_reset,
 #if defined(CONFIG_PM)
 	.bus_suspend 		= ohci_bus_suspend,

drivers/usb/host/ohci-pxa27x.c

@@ -298,6 +298,7 @@ static const struct hc_driver ohci_pxa27x_hc_driver = {
 	 */
 	.hub_status_data =	ohci_hub_status_data,
 	.hub_control =		ohci_hub_control,
+	.hub_irq_enable =	ohci_rhsc_enable,
 #ifdef  CONFIG_PM
 	.bus_suspend =		ohci_bus_suspend,
 	.bus_resume =		ohci_bus_resume,

drivers/usb/host/ohci-s3c2410.c

@@ -8,7 +8,7 @@
  * USB Bus Glue for Samsung S3C2410
  *
  * Written by Christopher Hoover <ch@hpl.hp.com>
- * Based on fragments of previous driver by Rusell King et al.
+ * Based on fragments of previous driver by Russell King et al.
  *
  * Modified for S3C2410 from ohci-sa1111.c, ohci-omap.c and ohci-lh7a40.c
  *	by Ben Dooks, <ben@simtec.co.uk>
@@ -466,6 +466,7 @@ static const struct hc_driver ohci_s3c2410_hc_driver = {
 	 */
 	.hub_status_data =	ohci_s3c2410_hub_status_data,
 	.hub_control =		ohci_s3c2410_hub_control,
+	.hub_irq_enable =	ohci_rhsc_enable,
 #ifdef	CONFIG_PM
 	.bus_suspend =		ohci_bus_suspend,
 	.bus_resume =		ohci_bus_resume,

drivers/usb/host/ohci-sa1111.c

@@ -8,7 +8,7 @@
  * SA1111 Bus Glue
  *
  * Written by Christopher Hoover <ch@hpl.hp.com>
- * Based on fragments of previous driver by Rusell King et al.
+ * Based on fragments of previous driver by Russell King et al.
  *
  * This file is licenced under the GPL.
  */
@@ -231,6 +231,7 @@ static const struct hc_driver ohci_sa1111_hc_driver = {
 	 */
 	.hub_status_data =	ohci_hub_status_data,
 	.hub_control =		ohci_hub_control,
+	.hub_irq_enable =	ohci_rhsc_enable,
 #ifdef	CONFIG_PM
 	.bus_suspend =		ohci_bus_suspend,
 	.bus_resume =		ohci_bus_resume,

drivers/usb/host/ohci-sh.c

@@ -68,6 +68,7 @@ static const struct hc_driver ohci_sh_hc_driver = {
 	 */
 	.hub_status_data =	ohci_hub_status_data,
 	.hub_control =		ohci_hub_control,
+	.hub_irq_enable =	ohci_rhsc_enable,
 #ifdef	CONFIG_PM
 	.bus_suspend =		ohci_bus_suspend,
 	.bus_resume =		ohci_bus_resume,

drivers/usb/host/ohci-sm501.c

@@ -75,6 +75,7 @@ static const struct hc_driver ohci_sm501_hc_driver = {
 	 */
 	.hub_status_data =	ohci_hub_status_data,
 	.hub_control =		ohci_hub_control,
+	.hub_irq_enable =	ohci_rhsc_enable,
 #ifdef	CONFIG_PM
 	.bus_suspend =		ohci_bus_suspend,
 	.bus_resume =		ohci_bus_resume,

drivers/usb/host/ohci-ssb.c

@@ -81,6 +81,7 @@ static const struct hc_driver ssb_ohci_hc_driver = {
 
 	.hub_status_data	= ohci_hub_status_data,
 	.hub_control		= ohci_hub_control,
+	.hub_irq_enable		= ohci_rhsc_enable,
 #ifdef	CONFIG_PM
 	.bus_suspend		= ohci_bus_suspend,
 	.bus_resume		= ohci_bus_resume,

drivers/usb/host/u132-hcd.c

@@ -2934,6 +2934,16 @@ static int u132_start_port_reset(struct usb_hcd *hcd, unsigned port_num)
 		return 0;
 }
 
+static void u132_hub_irq_enable(struct usb_hcd *hcd)
+{
+	struct u132 *u132 = hcd_to_u132(hcd);
+	if (u132->going > 1) {
+		dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
+			, u132->going);
+	} else if (u132->going > 0)
+		dev_err(&u132->platform_dev->dev, "device is being removed\n");
+}
+
 
 #ifdef CONFIG_PM
 static int u132_bus_suspend(struct usb_hcd *hcd)
@@ -2985,6 +2995,7 @@ static struct hc_driver u132_hc_driver = {
 	.bus_suspend = u132_bus_suspend,
 	.bus_resume = u132_bus_resume,
 	.start_port_reset = u132_start_port_reset,
+	.hub_irq_enable = u132_hub_irq_enable,
 };
 
 /*

drivers/video/fb_defio.c

@@ -74,6 +74,7 @@ static int fb_deferred_io_mkwrite(struct vm_area_struct *vma,
 {
 	struct fb_info *info = vma->vm_private_data;
 	struct fb_deferred_io *fbdefio = info->fbdefio;
+	struct page *cur;
 
 	/* this is a callback we get when userspace first tries to
 	write to the page. we schedule a workqueue. that workqueue
@@ -83,7 +84,24 @@ static int fb_deferred_io_mkwrite(struct vm_area_struct *vma,
 
 	/* protect against the workqueue changing the page list */
 	mutex_lock(&fbdefio->lock);
-	list_add(&page->lru, &fbdefio->pagelist);
+
+	/* we loop through the pagelist before adding in order
+	to keep the pagelist sorted */
+	list_for_each_entry(cur, &fbdefio->pagelist, lru) {
+		/* this check is to catch the case where a new
+		process could start writing to the same page
+		through a new pte. this new access can cause the
+		mkwrite even when the original ps's pte is marked
+		writable */
+		if (unlikely(cur == page))
+			goto page_already_added;
+		else if (cur->index > page->index)
+			break;
+	}
+
+	list_add_tail(&page->lru, &cur->lru);
+
+page_already_added:
 	mutex_unlock(&fbdefio->lock);
 
 	/* come back after delay to process the deferred IO */

drivers/video/fsl-diu-fb.c

@@ -1324,7 +1324,7 @@ static int fsl_diu_suspend(struct of_device *ofdev, pm_message_t state)
 {
 	struct fsl_diu_data *machine_data;
 
-	machine_data = dev_get_drvdata(&dev->dev);
+	machine_data = dev_get_drvdata(&ofdev->dev);
 	disable_lcdc(machine_data->fsl_diu_info[0]);
 
 	return 0;
@@ -1334,7 +1334,7 @@ static int fsl_diu_resume(struct of_device *ofdev)
 {
 	struct fsl_diu_data *machine_data;
 
-	machine_data = dev_get_drvdata(&dev->dev);
+	machine_data = dev_get_drvdata(&ofdev->dev);
 	enable_lcdc(machine_data->fsl_diu_info[0]);
 
 	return 0;

fs/cifs/cifsacl.c

@@ -34,11 +34,11 @@
 static struct cifs_wksid wksidarr[NUM_WK_SIDS] = {
 	{{1, 0, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0} }, "null user"},
 	{{1, 1, {0, 0, 0, 0, 0, 1}, {0, 0, 0, 0, 0} }, "nobody"},
-	{{1, 1, {0, 0, 0, 0, 0, 5}, {cpu_to_le32(11), 0, 0, 0, 0} }, "net-users"},
+	{{1, 1, {0, 0, 0, 0, 0, 5}, {__constant_cpu_to_le32(11), 0, 0, 0, 0} }, "net-users"},
-	{{1, 1, {0, 0, 0, 0, 0, 5}, {cpu_to_le32(18), 0, 0, 0, 0} }, "sys"},
+	{{1, 1, {0, 0, 0, 0, 0, 5}, {__constant_cpu_to_le32(18), 0, 0, 0, 0} }, "sys"},
-	{{1, 2, {0, 0, 0, 0, 0, 5}, {cpu_to_le32(32), cpu_to_le32(544), 0, 0, 0} }, "root"},
+	{{1, 2, {0, 0, 0, 0, 0, 5}, {__constant_cpu_to_le32(32), __constant_cpu_to_le32(544), 0, 0, 0} }, "root"},
-	{{1, 2, {0, 0, 0, 0, 0, 5}, {cpu_to_le32(32), cpu_to_le32(545), 0, 0, 0} }, "users"},
+	{{1, 2, {0, 0, 0, 0, 0, 5}, {__constant_cpu_to_le32(32), __constant_cpu_to_le32(545), 0, 0, 0} }, "users"},
-	{{1, 2, {0, 0, 0, 0, 0, 5}, {cpu_to_le32(32), cpu_to_le32(546), 0, 0, 0} }, "guest"} }
+	{{1, 2, {0, 0, 0, 0, 0, 5}, {__constant_cpu_to_le32(32), __constant_cpu_to_le32(546), 0, 0, 0} }, "guest"} }
 ;
 
 

fs/cifs/inode.c

@@ -219,15 +219,15 @@ int cifs_get_inode_info_unix(struct inode **pinode,
 	rc = CIFSSMBUnixQPathInfo(xid, pTcon, full_path, &find_data,
 				  cifs_sb->local_nls, cifs_sb->mnt_cifs_flags &
 					CIFS_MOUNT_MAP_SPECIAL_CHR);
-	if (rc) {
+	if (rc == -EREMOTE && !is_dfs_referral) {
-		if (rc == -EREMOTE && !is_dfs_referral) {
+		is_dfs_referral = true;
-			is_dfs_referral = true;
+		cFYI(DBG2, ("DFS ref"));
-			cFYI(DBG2, ("DFS ref"));
+		/* for DFS, server does not give us real inode data */
-			/* for DFS, server does not give us real inode data */
+		fill_fake_finddataunix(&find_data, sb);
-			fill_fake_finddataunix(&find_data, sb);
+		rc = 0;
-			rc = 0;
+	} else if (rc)
-		}
+		goto cgiiu_exit;
-	}
+
 	num_of_bytes = le64_to_cpu(find_data.NumOfBytes);
 	end_of_file = le64_to_cpu(find_data.EndOfFile);
 
@@ -236,7 +236,7 @@ int cifs_get_inode_info_unix(struct inode **pinode,
 		*pinode = new_inode(sb);
 		if (*pinode == NULL) {
 			rc = -ENOMEM;
-		goto cgiiu_exit;
+			goto cgiiu_exit;
 		}
 		/* Is an i_ino of zero legal? */
 		/* note ino incremented to unique num in new_inode */

fs/exec.c

@@ -610,7 +610,7 @@ int setup_arg_pages(struct linux_binprm *bprm,
 	bprm->exec -= stack_shift;
 
 	down_write(&mm->mmap_sem);
-	vm_flags = vma->vm_flags;
+	vm_flags = VM_STACK_FLAGS;
 
 	/*
 	 * Adjust stack execute permissions; explicitly enable for

fs/nfs/dir.c

@@ -204,7 +204,7 @@ int nfs_readdir_filler(nfs_readdir_descriptor_t *desc, struct page *page)
 	 * Note: assumes we have exclusive access to this mapping either
 	 *	 through inode->i_mutex or some other mechanism.
 	 */
-	if (page->index == 0 && invalidate_inode_pages2_range(inode->i_mapping, PAGE_CACHE_SIZE, -1) < 0) {
+	if (invalidate_inode_pages2_range(inode->i_mapping, page->index + 1, -1) < 0) {
 		/* Should never happen */
 		nfs_zap_mapping(inode, inode->i_mapping);
 	}

fs/ocfs2/dlm/dlmmaster.c

@@ -606,7 +606,9 @@ static void dlm_init_lockres(struct dlm_ctxt *dlm,
 
 	res->last_used = 0;
 
+	spin_lock(&dlm->spinlock);
 	list_add_tail(&res->tracking, &dlm->tracking_list);
+	spin_unlock(&dlm->spinlock);
 
 	memset(res->lvb, 0, DLM_LVB_LEN);
 	memset(res->refmap, 0, sizeof(res->refmap));

fs/ocfs2/dlmglue.c

@@ -1554,8 +1554,8 @@ out:
  */
 int ocfs2_file_lock(struct file *file, int ex, int trylock)
 {
-	int ret, level = ex ? LKM_EXMODE : LKM_PRMODE;
+	int ret, level = ex ? DLM_LOCK_EX : DLM_LOCK_PR;
-	unsigned int lkm_flags = trylock ? LKM_NOQUEUE : 0;
+	unsigned int lkm_flags = trylock ? DLM_LKF_NOQUEUE : 0;
 	unsigned long flags;
 	struct ocfs2_file_private *fp = file->private_data;
 	struct ocfs2_lock_res *lockres = &fp->fp_flock;
@@ -1582,7 +1582,7 @@ int ocfs2_file_lock(struct file *file, int ex, int trylock)
 		 * Get the lock at NLMODE to start - that way we
 		 * can cancel the upconvert request if need be.
 		 */
-		ret = ocfs2_lock_create(osb, lockres, LKM_NLMODE, 0);
+		ret = ocfs2_lock_create(osb, lockres, DLM_LOCK_NL, 0);
 		if (ret < 0) {
 			mlog_errno(ret);
 			goto out;
@@ -1597,7 +1597,7 @@ int ocfs2_file_lock(struct file *file, int ex, int trylock)
 	}
 
 	lockres->l_action = OCFS2_AST_CONVERT;
-	lkm_flags |= LKM_CONVERT;
+	lkm_flags |= DLM_LKF_CONVERT;
 	lockres->l_requested = level;
 	lockres_or_flags(lockres, OCFS2_LOCK_BUSY);
 
@@ -1664,7 +1664,7 @@ void ocfs2_file_unlock(struct file *file)
 	if (!(lockres->l_flags & OCFS2_LOCK_ATTACHED))
 		return;
 
-	if (lockres->l_level == LKM_NLMODE)
+	if (lockres->l_level == DLM_LOCK_NL)
 		return;
 
 	mlog(0, "Unlock: \"%s\" flags: 0x%lx, level: %d, act: %d\n",
@@ -1678,11 +1678,11 @@ void ocfs2_file_unlock(struct file *file)
 	lockres_or_flags(lockres, OCFS2_LOCK_BLOCKED);
 	lockres->l_blocking = DLM_LOCK_EX;
 
-	gen = ocfs2_prepare_downconvert(lockres, LKM_NLMODE);
+	gen = ocfs2_prepare_downconvert(lockres, DLM_LOCK_NL);
 	lockres_add_mask_waiter(lockres, &mw, OCFS2_LOCK_BUSY, 0);
 	spin_unlock_irqrestore(&lockres->l_lock, flags);
 
-	ret = ocfs2_downconvert_lock(osb, lockres, LKM_NLMODE, 0, gen);
+	ret = ocfs2_downconvert_lock(osb, lockres, DLM_LOCK_NL, 0, gen);
 	if (ret) {
 		mlog_errno(ret);
 		return;

fs/reiserfs/inode.c

@@ -45,6 +45,8 @@ void reiserfs_delete_inode(struct inode *inode)
 			goto out;
 		reiserfs_update_inode_transaction(inode);
 
+		reiserfs_discard_prealloc(&th, inode);
+
 		err = reiserfs_delete_object(&th, inode);
 
 		/* Do quota update inside a transaction for journaled quotas. We must do that

fs/xfs/xfs_log.c

@@ -2427,13 +2427,20 @@ restart:
 	if (iclog->ic_size - iclog->ic_offset < 2*sizeof(xlog_op_header_t)) {
 		xlog_state_switch_iclogs(log, iclog, iclog->ic_size);
 
-		/* If I'm the only one writing to this iclog, sync it to disk */
+		/*
-		if (atomic_read(&iclog->ic_refcnt) == 1) {
+		 * If I'm the only one writing to this iclog, sync it to disk.
+		 * We need to do an atomic compare and decrement here to avoid
+		 * racing with concurrent atomic_dec_and_lock() calls in
+		 * xlog_state_release_iclog() when there is more than one
+		 * reference to the iclog.
+		 */
+		if (!atomic_add_unless(&iclog->ic_refcnt, -1, 1)) {
+			/* we are the only one */
 			spin_unlock(&log->l_icloglock);
-			if ((error = xlog_state_release_iclog(log, iclog)))
+			error = xlog_state_release_iclog(log, iclog);
+			if (error)
 				return error;
 		} else {
-			atomic_dec(&iclog->ic_refcnt);
 			spin_unlock(&log->l_icloglock);
 		}
 		goto restart;

include/asm-avr32/setup.h

@@ -2,7 +2,7 @@
  * Copyright (C) 2004-2006 Atmel Corporation
  *
  * Based on linux/include/asm-arm/setup.h
- *   Copyright (C) 1997-1999 Russel King
+ *   Copyright (C) 1997-1999 Russell King
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as

include/asm-frv/system.h

@@ -87,7 +87,7 @@ do {								\
 } while(0)
 
 #define irqs_disabled() \
-	({unsigned long flags; local_save_flags(flags); flags; })
+	({unsigned long flags; local_save_flags(flags); !!flags; })
 
 #define	local_irq_save(flags)			\
 do {						\

include/asm-powerpc/hugetlb.h

@@ -49,12 +49,6 @@ static inline pte_t huge_pte_wrprotect(pte_t pte)
 	return pte_wrprotect(pte);
 }
 
-static inline void huge_ptep_set_wrprotect(struct mm_struct *mm,
-					   unsigned long addr, pte_t *ptep)
-{
-	ptep_set_wrprotect(mm, addr, ptep);
-}
-
 static inline int huge_ptep_set_access_flags(struct vm_area_struct *vma,
 					     unsigned long addr, pte_t *ptep,
 					     pte_t pte, int dirty)