usb: host: xhci-plat: add struct xhci_plat_priv

This patch adds struct xhci_plat_priv to simplify the code to match
platform specific variables. For now, this patch adds a member "type"
in the structure.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/usb/host/xhci-plat.c

@@ -22,6 +22,7 @@
 #include <linux/acpi.h>
 
 #include "xhci.h"
+#include "xhci-plat.h"
 #include "xhci-mvebu.h"
 #include "xhci-rcar.h"
 
@@ -31,6 +32,7 @@ static int xhci_plat_setup(struct usb_hcd *hcd);
 static int xhci_plat_start(struct usb_hcd *hcd);
 
 static const struct xhci_driver_overrides xhci_plat_overrides __initconst = {
+	.extra_priv_size = sizeof(struct xhci_plat_priv),
 	.reset = xhci_plat_setup,
 	.start = xhci_plat_start,
 };
@@ -48,11 +50,9 @@ static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci)
 /* called during probe() after chip reset completes */
 static int xhci_plat_setup(struct usb_hcd *hcd)
 {
-	struct device_node *of_node = hcd->self.controller->of_node;
 	int ret;
 
-	if (of_device_is_compatible(of_node, "renesas,xhci-r8a7790") ||
+	if (xhci_plat_type_is(hcd, XHCI_PLAT_TYPE_RENESAS_RCAR_GEN2)) {
-	    of_device_is_compatible(of_node, "renesas,xhci-r8a7791")) {
 		ret = xhci_rcar_init_quirk(hcd);
 		if (ret)
 			return ret;
@@ -63,19 +63,49 @@ static int xhci_plat_setup(struct usb_hcd *hcd)
 
 static int xhci_plat_start(struct usb_hcd *hcd)
 {
-	struct device_node *of_node = hcd->self.controller->of_node;
+	if (xhci_plat_type_is(hcd, XHCI_PLAT_TYPE_RENESAS_RCAR_GEN2))
-
-	if (of_device_is_compatible(of_node, "renesas,xhci-r8a7790") ||
-	    of_device_is_compatible(of_node, "renesas,xhci-r8a7791"))
 		xhci_rcar_start(hcd);
 
 	return xhci_run(hcd);
 }
 
+#ifdef CONFIG_OF
+static const struct xhci_plat_priv xhci_plat_marvell_armada = {
+	.type = XHCI_PLAT_TYPE_MARVELL_ARMADA,
+};
+
+static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen2 = {
+	.type = XHCI_PLAT_TYPE_RENESAS_RCAR_GEN2,
+};
+
+static const struct of_device_id usb_xhci_of_match[] = {
+	{
+		.compatible = "generic-xhci",
+	}, {
+		.compatible = "xhci-platform",
+	}, {
+		.compatible = "marvell,armada-375-xhci",
+		.data = &xhci_plat_marvell_armada,
+	}, {
+		.compatible = "marvell,armada-380-xhci",
+		.data = &xhci_plat_marvell_armada,
+	}, {
+		.compatible = "renesas,xhci-r8a7790",
+		.data = &xhci_plat_renesas_rcar_gen2,
+	}, {
+		.compatible = "renesas,xhci-r8a7791",
+		.data = &xhci_plat_renesas_rcar_gen2,
+	}, {
+	},
+};
+MODULE_DEVICE_TABLE(of, usb_xhci_of_match);
+#endif
+
 static int xhci_plat_probe(struct platform_device *pdev)
 {
 	struct device_node	*node = pdev->dev.of_node;
 	struct usb_xhci_pdata	*pdata = dev_get_platdata(&pdev->dev);
+	const struct of_device_id *match;
 	const struct hc_driver	*driver;
 	struct xhci_hcd		*xhci;
 	struct resource         *res;
@@ -133,10 +163,17 @@ static int xhci_plat_probe(struct platform_device *pdev)
 			goto put_hcd;
 	}
 
-	if (of_device_is_compatible(pdev->dev.of_node,
+	xhci = hcd_to_xhci(hcd);
-				    "marvell,armada-375-xhci") ||
+	match = of_match_node(usb_xhci_of_match, node);
-	    of_device_is_compatible(pdev->dev.of_node,
+	if (match) {
-				    "marvell,armada-380-xhci")) {
+		const struct xhci_plat_priv *priv_match = match->data;
+		struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
+
+		/* Just copy data for now */
+		*priv = *priv_match;
+	}
+
+	if (xhci_plat_type_is(hcd, XHCI_PLAT_TYPE_MARVELL_ARMADA)) {
 		ret = xhci_mvebu_mbus_init_quirk(pdev);
 		if (ret)
 			goto disable_clk;
@@ -144,7 +181,6 @@ static int xhci_plat_probe(struct platform_device *pdev)
 
 	device_wakeup_enable(hcd->self.controller);
 
-	xhci = hcd_to_xhci(hcd);
 	xhci->clk = clk;
 	xhci->main_hcd = hcd;
 	xhci->shared_hcd = usb_create_shared_hcd(driver, &pdev->dev,
@@ -255,19 +291,6 @@ static const struct dev_pm_ops xhci_plat_pm_ops = {
 #define DEV_PM_OPS	NULL
 #endif /* CONFIG_PM */
 
-#ifdef CONFIG_OF
-static const struct of_device_id usb_xhci_of_match[] = {
-	{ .compatible = "generic-xhci" },
-	{ .compatible = "xhci-platform" },
-	{ .compatible = "marvell,armada-375-xhci"},
-	{ .compatible = "marvell,armada-380-xhci"},
-	{ .compatible = "renesas,xhci-r8a7790"},
-	{ .compatible = "renesas,xhci-r8a7791"},
-	{ },
-};
-MODULE_DEVICE_TABLE(of, usb_xhci_of_match);
-#endif
-
 static const struct acpi_device_id usb_xhci_acpi_match[] = {
 	/* XHCI-compliant USB Controller */
 	{ "PNP0D10", },

drivers/usb/host/xhci-plat.h

@@ -0,0 +1,37 @@
+/*
+ * xhci-plat.h - xHCI host controller driver platform Bus Glue.
+ *
+ * Copyright (C) 2015 Renesas Electronics Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ */
+
+#ifndef _XHCI_PLAT_H
+#define _XHCI_PLAT_H
+
+#include "xhci.h"	/* for hcd_to_xhci() */
+
+enum xhci_plat_type {
+	XHCI_PLAT_TYPE_MARVELL_ARMADA,
+	XHCI_PLAT_TYPE_RENESAS_RCAR_GEN2,
+};
+
+struct xhci_plat_priv {
+	enum xhci_plat_type type;
+};
+
+#define hcd_to_xhci_priv(h) ((struct xhci_plat_priv *)hcd_to_xhci(h)->priv)
+
+static inline bool xhci_plat_type_is(struct usb_hcd *hcd,
+				     enum xhci_plat_type type)
+{
+	struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
+
+	if (priv && priv->type == type)
+		return true;
+	else
+		return false;
+}
+#endif	/* _XHCI_PLAT_H */