leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Merge branch 'sched/urgent'; commit 'v2.6.28' into sched/core

Browse Source
This commit is contained in:
Ingo Molnar 2008-12-25 13:42:23 +01:00
commit 4e202284e6
167 changed files with 1709 additions and 1311 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Documentation/arm/mem_alignment
View File

@ -24,7 +24,7 @@ real bad - it changes the behaviour of all unaligned instructions in user
space, and might cause programs to fail unexpectedly.
To change the alignment trap behavior, simply echo a number into
/proc/sys/debug/alignment. The number is made up from various bits:
/proc/cpu/alignment. The number is made up from various bits:
bit behavior when set
--- -----------------

11
Documentation/kernel-parameters.txt
View File

@ -220,14 +220,17 @@ and is between 256 and 4096 characters. It is defined in the file
Bits in debug_level correspond to a level in
ACPI_DEBUG_PRINT statements, e.g.,
ACPI_DEBUG_PRINT((ACPI_DB_INFO, ...
See Documentation/acpi/debug.txt for more information
about debug layers and levels.
The debug_level mask defaults to "info". See
Documentation/acpi/debug.txt for more information about
debug layers and levels.
Enable processor driver info messages:
acpi.debug_layer=0x20000000
Enable PCI/PCI interrupt routing info messages:
acpi.debug_layer=0x400000
Enable AML "Debug" output, i.e., stores to the Debug
object while interpreting AML:
acpi.debug_layer=0xffffffff acpi.debug_level=0x2
Enable PCI/PCI interrupt routing info messages:
acpi.debug_layer=0x400000 acpi.debug_level=0x4
Enable all messages related to ACPI hardware:
acpi.debug_layer=0x2 acpi.debug_level=0xffffffff

2
Documentation/sound/alsa/ALSA-Configuration.txt
View File

@ -1063,6 +1063,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
STAC9227/9228/9229/927x
ref Reference board
ref-no-jd Reference board without HP/Mic jack detection
3stack D965 3stack
5stack D965 5stack + SPDIF
dell-3stack Dell Dimension E520
@ -1076,6 +1077,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
STAC92HD73*
ref Reference board
no-jd BIOS setup but without jack-detection
dell-m6-amic Dell desktops/laptops with analog mics
dell-m6-dmic Dell desktops/laptops with digital mics
dell-m6 Dell desktops/laptops with both type of mics

4
Documentation/usb/gadget_serial.txt
View File

@ -114,11 +114,11 @@ modules.
Then you must load the gadget serial driver. To load it as an
ACM device (recommended for interoperability), do this:
modprobe g_serial use_acm=1
modprobe g_serial
To load it as a vendor specific bulk in/out device, do this:
modprobe g_serial
modprobe g_serial use_acm=0
This will also automatically load the underlying gadget peripheral
controller driver. This must be done each time you reboot the gadget

6
Documentation/usb/proc_usb_info.txt
View File

@ -49,8 +49,10 @@ it and 002/048 sometime later.
These files can be read as binary data. The binary data consists
of first the device descriptor, then the descriptors for each
configuration of the device. That information is also shown in
text form by the /proc/bus/usb/devices file, described later.
configuration of the device. Multi-byte fields in the device and
configuration descriptors, but not other descriptors, are converted
to host endianness by the kernel. This information is also shown
in text form by the /proc/bus/usb/devices file, described later.
These files may also be used to write user-level drivers for the USB
devices. You would open the /proc/bus/usb/BBB/DDD file read/write,

12
Documentation/usb/usbmon.txt
View File

@ -34,11 +34,12 @@ if usbmon is built into the kernel.
Verify that bus sockets are present.
# ls /sys/kernel/debug/usbmon
0s 0t 0u 1s 1t 1u 2s 2t 2u 3s 3t 3u 4s 4t 4u
0s 0u 1s 1t 1u 2s 2t 2u 3s 3t 3u 4s 4t 4u
#
Now you can choose to either use the sockets numbered '0' (to capture packets on
all buses), and skip to step #3, or find the bus used by your device with step #2.
Now you can choose to either use the socket '0u' (to capture packets on all
buses), and skip to step #3, or find the bus used by your device with step #2.
This allows to filter away annoying devices that talk continuously.
2. Find which bus connects to the desired device
@ -99,8 +100,9 @@ on the event type, but there is a set of words, common for all types.
Here is the list of words, from left to right:
- URB Tag. This is used to identify URBs is normally a kernel mode address
of the URB structure in hexadecimal.
- URB Tag. This is used to identify URBs, and is normally an in-kernel address
of the URB structure in hexadecimal, but can be a sequence number or any
other unique string, within reason.
- Timestamp in microseconds, a decimal number. The timestamp's resolution
depends on available clock, and so it can be much worse than a microsecond

14
MAINTAINERS
View File

@ -1527,10 +1527,10 @@ W: http://ebtables.sourceforge.net/
S: Maintained
ECRYPT FILE SYSTEM
P: Mike Halcrow, Phillip Hellewell
M: mhalcrow@us.ibm.com, phillip@hellewell.homeip.net
L: ecryptfs-devel@lists.sourceforge.net
W: http://ecryptfs.sourceforge.net/
P: Tyler Hicks, Dustin Kirkland
M: tyhicks@linux.vnet.ibm.com, kirkland@canonical.com
L: ecryptfs-devel@lists.launchpad.net
W: https://launchpad.net/ecryptfs
S: Supported
EDAC-CORE
@ -2191,9 +2191,9 @@ S: Supported
INOTIFY
P: John McCutchan
M: ttb@tentacle.dhs.org
M: john@johnmccutchan.com
P: Robert Love
M: rml@novell.com
M: rlove@rlove.org
L: linux-kernel@vger.kernel.org
S: Maintained
@ -4529,7 +4529,7 @@ S: Maintained
USB VIDEO CLASS
P: Laurent Pinchart
M: laurent.pinchart@skynet.be
L: linux-uvc-devel@lists.berlios.de
L: linux-uvc-devel@lists.berlios.de (subscribers-only)
L: video4linux-list@redhat.com
W: http://linux-uvc.berlios.de
S: Maintained

2
Makefile
View File

@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 28
EXTRAVERSION = -rc8
EXTRAVERSION =
NAME = Erotic Pickled Herring
# *DOCUMENTATION*

2
arch/arm/common/sa1111.c
View File

@ -630,7 +630,7 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq)
return -ENOMEM;
sachip->clk = clk_get(me, "SA1111_CLK");
if (!sachip->clk) {
if (IS_ERR(sachip->clk)) {
ret = PTR_ERR(sachip->clk);
goto err_free;
}

4
arch/arm/kernel/armksyms.c
View File

@ -115,6 +115,8 @@ EXPORT_SYMBOL(__strnlen_user);
EXPORT_SYMBOL(__strncpy_from_user);
#ifdef CONFIG_MMU
EXPORT_SYMBOL(copy_page);
EXPORT_SYMBOL(__copy_from_user);
EXPORT_SYMBOL(__copy_to_user);
EXPORT_SYMBOL(__clear_user);
@ -181,8 +183,6 @@ EXPORT_SYMBOL(_find_first_bit_be);
EXPORT_SYMBOL(_find_next_bit_be);
#endif
EXPORT_SYMBOL(copy_page);
#ifdef CONFIG_FUNCTION_TRACER
EXPORT_SYMBOL(mcount);
#endif

1
arch/arm/kernel/traps.c
View File

@ -18,6 +18,7 @@
#include <linux/personality.h>
#include <linux/kallsyms.h>
#include <linux/delay.h>
#include <linux/hardirq.h>
#include <linux/init.h>
#include <linux/uaccess.h>

5
arch/arm/mach-pxa/include/mach/reset.h
View File

@ -12,9 +12,8 @@ extern void clear_reset_status(unsigned int mask);
/**
* init_gpio_reset() - register GPIO as reset generator
*
* @gpio - gpio nr
* @output - set gpio as out/low instead of input during normal work
* @gpio: gpio nr
* @output: set gpio as out/low instead of input during normal work
*/
extern int init_gpio_reset(int gpio, int output);

1
arch/arm/mm/fault.c
View File

@ -11,6 +11,7 @@
#include <linux/module.h>
#include <linux/signal.h>
#include <linux/mm.h>
#include <linux/hardirq.h>
#include <linux/init.h>
#include <linux/kprobes.h>
#include <linux/uaccess.h>

2
arch/avr32/boards/favr-32/flash.c
View File

@ -13,7 +13,7 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <asm/arch/smc.h>
#include <mach/smc.h>
static struct smc_timing flash_timing __initdata = {
.ncs_read_setup = 0,

8
arch/avr32/boards/favr-32/setup.c
View File

@ -25,10 +25,10 @@
#include <asm/setup.h>
#include <asm/arch/at32ap700x.h>
#include <asm/arch/init.h>
#include <asm/arch/board.h>
#include <asm/arch/portmux.h>
#include <mach/at32ap700x.h>
#include <mach/init.h>
#include <mach/board.h>
#include <mach/portmux.h>
/* Oscillator frequencies. These are board-specific */
unsigned long at32_board_osc_rates[3] = {

2
arch/avr32/boot/images/Makefile
View File

@ -10,7 +10,7 @@ MKIMAGE := $(srctree)/scripts/mkuboot.sh
extra-y := vmlinux.bin vmlinux.gz
OBJCOPYFLAGS_vmlinux.bin := -O binary
OBJCOPYFLAGS_vmlinux.bin := -O binary -R .note.gnu.build-id
$(obj)/vmlinux.bin: vmlinux FORCE
$(call if_changed,objcopy)

134
arch/avr32/configs/atstk1006_defconfig
View File

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.27-rc1
# Tue Aug 5 15:40:26 2008
# Linux kernel version: 2.6.28-rc8
# Thu Dec 18 11:22:23 2008
#
CONFIG_AVR32=y
CONFIG_GENERIC_GPIO=y
@ -67,6 +67,7 @@ CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
@ -77,15 +78,8 @@ CONFIG_PROFILING=y
CONFIG_OPROFILE=m
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
# CONFIG_HAVE_IOREMAP_PROT is not set
CONFIG_HAVE_KPROBES=y
# CONFIG_HAVE_KRETPROBES is not set
# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
# CONFIG_USE_GENERIC_SMP_HELPERS is not set
CONFIG_HAVE_CLK=y
CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@ -118,6 +112,7 @@ CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_CLASSIC_RCU=y
CONFIG_FREEZER=y
#
# System Type and features
@ -134,6 +129,8 @@ CONFIG_CPU_AT32AP700X=y
CONFIG_CPU_AT32AP7000=y
CONFIG_BOARD_ATSTK1000=y
# CONFIG_BOARD_ATNGW100 is not set
# CONFIG_BOARD_FAVR_32 is not set
# CONFIG_BOARD_MIMC200 is not set
# CONFIG_BOARD_ATSTK1002 is not set
# CONFIG_BOARD_ATSTK1003 is not set
# CONFIG_BOARD_ATSTK1004 is not set
@ -171,14 +168,14 @@ CONFIG_FLATMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
# CONFIG_OWNERSHIP_TRACE is not set
CONFIG_NMI_DEBUGGING=y
# CONFIG_HZ_100 is not set
@ -186,7 +183,7 @@ CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_SCHED_HRTICK is not set
CONFIG_SCHED_HRTICK=y
CONFIG_CMDLINE=""
#
@ -228,6 +225,8 @@ CONFIG_CPU_FREQ_AT32AP=y
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_NET=y
@ -299,6 +298,7 @@ CONFIG_IPV6_TUNNEL=m
# CONFIG_ATM is not set
CONFIG_STP=m
CONFIG_BRIDGE=m
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
@ -321,14 +321,8 @@ CONFIG_LLC=m
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
#
# Wireless
#
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@ -359,6 +353,7 @@ CONFIG_MTD_CMDLINE_PARTS=y
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
CONFIG_HAVE_MTD_OTP=y
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
@ -407,6 +402,8 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
# Self-contained MTD device drivers
#
CONFIG_MTD_DATAFLASH=m
# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
CONFIG_MTD_DATAFLASH_OTP=y
CONFIG_MTD_M25P80=m
CONFIG_M25PXX_USE_FAST_READ=y
# CONFIG_MTD_SLRAM is not set
@ -464,9 +461,10 @@ CONFIG_ATMEL_TCLIB=y
CONFIG_ATMEL_TCB_CLKSRC=y
CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ICS932S401 is not set
CONFIG_ATMEL_SSC=m
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HAVE_IDE is not set
# CONFIG_C2PORT is not set
#
# SCSI device support
@ -548,6 +546,9 @@ CONFIG_MACB=y
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
@ -653,6 +654,7 @@ CONFIG_UNIX98_PTYS=y
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=m
#
@ -716,6 +718,10 @@ CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
#
# Memory mapped GPIO expanders:
#
#
# I2C GPIO expanders:
#
@ -745,11 +751,11 @@ CONFIG_WATCHDOG=y
#
# CONFIG_SOFT_WATCHDOG is not set
CONFIG_AT32AP700X_WDT=y
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
@ -758,6 +764,10 @@ CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_REGULATOR is not set
#
# Multimedia devices
@ -783,6 +793,7 @@ CONFIG_SSB_POSSIBLE=y
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
@ -804,10 +815,13 @@ CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_ATMEL=y
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_LTV350QV=y
# CONFIG_LCD_ILI9320 is not set
# CONFIG_LCD_TDO24M is not set
# CONFIG_LCD_VGG2432A4 is not set
# CONFIG_LCD_PLATFORM is not set
# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
@ -818,6 +832,7 @@ CONFIG_LCD_LTV350QV=y
# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_LOGO is not set
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
@ -848,28 +863,32 @@ CONFIG_USB_SUPPORT=y
# CONFIG_USB_ARCH_HAS_EHCI is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_GADGET_MUSB_HDRC is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
# CONFIG_USB_GADGET_DEBUG_FS is not set
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_SELECTED=y
# CONFIG_USB_GADGET_AMD5536UDC is not set
# CONFIG_USB_GADGET_AT91 is not set
CONFIG_USB_GADGET_ATMEL_USBA=y
CONFIG_USB_ATMEL_USBA=y
# CONFIG_USB_GADGET_FSL_USB2 is not set
# CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_PXA25X is not set
# CONFIG_USB_GADGET_M66592 is not set
# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_PXA25X is not set
# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_S3C2410 is not set
# CONFIG_USB_GADGET_AT91 is not set
# CONFIG_USB_GADGET_M66592 is not set
# CONFIG_USB_GADGET_AMD5536UDC is not set
# CONFIG_USB_GADGET_FSL_QE is not set
# CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
CONFIG_USB_GADGET_DUALSPEED=y
CONFIG_USB_ZERO=m
@ -887,7 +906,7 @@ CONFIG_MMC=y
# CONFIG_MMC_UNSAFE_RESUME is not set
#
# MMC/SD Card Drivers
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_BOUNCE=y
@ -895,10 +914,11 @@ CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_MMC_TEST is not set
#
# MMC/SD Host Controller Drivers
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_SDHCI is not set
CONFIG_MMC_ATMELMCI=y
# CONFIG_MMC_ATMELMCI_DMA is not set
CONFIG_MMC_SPI=m
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
@ -918,6 +938,7 @@ CONFIG_LEDS_GPIO=m
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
@ -950,25 +971,31 @@ CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_DS3234 is not set
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@ -989,6 +1016,8 @@ CONFIG_DMA_ENGINE=y
# CONFIG_NET_DMA is not set
CONFIG_DMATEST=m
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
@ -998,12 +1027,17 @@ CONFIG_EXT2_FS=m
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_EXT4_FS=m
CONFIG_EXT4DEV_COMPAT=y
# CONFIG_EXT4_FS_XATTR is not set
CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=m
# CONFIG_JBD2_DEBUG is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_DNOTIFY is not set
@ -1036,6 +1070,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
@ -1054,7 +1089,8 @@ CONFIG_TMPFS=y
# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
# CONFIG_JFFS2_FS_WRITEBUFFER is not set
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
@ -1088,6 +1124,7 @@ CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@ -1185,10 +1222,21 @@ CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
#
# Tracers
#
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
#
@ -1196,17 +1244,26 @@ CONFIG_FRAME_POINTER=y
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=m
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=m
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
@ -1257,7 +1314,7 @@ CONFIG_CRYPTO_SHA1=m
#
# Ciphers
#
# CONFIG_CRYPTO_AES is not set
CONFIG_CRYPTO_AES=m
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_BLOWFISH is not set
@ -1278,14 +1335,17 @@ CONFIG_CRYPTO_DES=m
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=m

8
arch/avr32/mach-at32ap/at32ap700x.c
View File

@ -967,28 +967,28 @@ static inline void configure_usart0_pins(void)
{
u32 pin_mask = (1 << 8) | (1 << 9); /* RXD & TXD */
select_peripheral(PIOA, pin_mask, PERIPH_B, 0);
select_peripheral(PIOA, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP);
}
static inline void configure_usart1_pins(void)
{
u32 pin_mask = (1 << 17) | (1 << 18); /* RXD & TXD */
select_peripheral(PIOA, pin_mask, PERIPH_A, 0);
select_peripheral(PIOA, pin_mask, PERIPH_A, AT32_GPIOF_PULLUP);
}
static inline void configure_usart2_pins(void)
{
u32 pin_mask = (1 << 26) | (1 << 27); /* RXD & TXD */
select_peripheral(PIOB, pin_mask, PERIPH_B, 0);
select_peripheral(PIOB, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP);
}
static inline void configure_usart3_pins(void)
{
u32 pin_mask = (1 << 18) | (1 << 17); /* RXD & TXD */
select_peripheral(PIOB, pin_mask, PERIPH_B, 0);
select_peripheral(PIOB, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP);
}
static struct platform_device *__initdata at32_usarts[4];

1
arch/ia64/hp/sim/Kconfig
View File

@ -4,6 +4,7 @@ menu "HP Simulator drivers"
config HP_SIMETH
bool "Simulated Ethernet "
depends on NET
config HP_SIMSERIAL
bool "Simulated serial driver support"

2
arch/mips/Kconfig.debug
View File

@ -48,7 +48,7 @@ config RUNTIME_DEBUG
help
If you say Y here, some debugging macros will do run-time checking.
If you say N here, those macros will mostly turn to no-ops. See
include/asm-mips/debug.h for debuging macros.
arch/mips/include/asm/debug.h for debugging macros.
If unsure, say N.
endmenu

1096
arch/mips/configs/ip32_defconfig
View File

File diff suppressed because it is too large Load Diff

10
arch/mips/include/asm/asmmacro.h
View File

@ -35,6 +35,16 @@
mtc0 \reg, CP0_TCSTATUS
_ehb
.endm
#elif defined(CONFIG_CPU_MIPSR2)
.macro local_irq_enable reg=t0
ei
irq_enable_hazard
.endm
.macro local_irq_disable reg=t0
di
irq_disable_hazard
.endm
#else
.macro local_irq_enable reg=t0
mfc0 \reg, CP0_STATUS

5
arch/mips/include/asm/byteorder.h
View File

@ -50,9 +50,8 @@ static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
static inline __attribute_const__ __u64 __arch_swab64(__u64 x)
{
__asm__(
" dsbh %0, %1 \n"
" dshd %0, %0 \n"
" drotr %0, %0, 32 \n"
" dsbh %0, %1\n"
" dshd %0, %0"
: "=r" (x)
: "r" (x));

2
arch/mips/include/asm/elf.h
View File

@ -232,7 +232,7 @@ typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
*/
#ifdef __MIPSEB__
#define ELF_DATA ELFDATA2MSB
#elif __MIPSEL__
#elif defined(__MIPSEL__)
#define ELF_DATA ELFDATA2LSB
#endif
#define ELF_ARCH EM_MIPS

3
arch/mips/mm/dma-default.c
View File

@ -111,6 +111,7 @@ EXPORT_SYMBOL(dma_alloc_coherent);
void dma_free_noncoherent(struct device *dev, size_t size, void *vaddr,
dma_addr_t dma_handle)
{
plat_unmap_dma_mem(dma_handle);
free_pages((unsigned long) vaddr, get_order(size));
}
@ -121,6 +122,8 @@ void dma_free_coherent(struct device *dev, size_t size, void *vaddr,
{
unsigned long addr = (unsigned long) vaddr;
plat_unmap_dma_mem(dma_handle);
if (!plat_device_is_coherent(dev))
addr = CAC_ADDR(addr);

5
arch/parisc/include/asm/tlbflush.h
View File

@ -44,9 +44,12 @@ static inline void flush_tlb_mm(struct mm_struct *mm)
{
BUG_ON(mm == &init_mm); /* Should never happen */
#ifdef CONFIG_SMP
#if 1 || defined(CONFIG_SMP)
flush_tlb_all();
#else
/* FIXME: currently broken, causing space id and protection ids
* to go out of sync, resulting in faults on userspace accesses.
*/
if (mm) {
if (mm->context != 0)
free_sid(mm->context);

1
arch/powerpc/boot/Makefile
View File

@ -41,6 +41,7 @@ $(obj)/4xx.o: BOOTCFLAGS += -mcpu=405
$(obj)/ebony.o: BOOTCFLAGS += -mcpu=405
$(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=405
$(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405
$(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405
$(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405
$(obj)/virtex405-head.o: BOOTAFLAGS += -mcpu=405

5
arch/powerpc/kernel/misc_32.S
View File

@ -479,17 +479,20 @@ _GLOBAL(_tlbil_pid)
* (no broadcast)
*/
_GLOBAL(_tlbil_va)
mfmsr r10
wrteei 0
slwi r4,r4,16
mtspr SPRN_MAS6,r4 /* assume AS=0 for now */
tlbsx 0,r3
mfspr r4,SPRN_MAS1 /* check valid */
andis. r3,r4,MAS1_VALID@h
beqlr
beq 1f
rlwinm r4,r4,0,1,31
mtspr SPRN_MAS1,r4
tlbwe
msync
isync
1: wrtee r10
blr
#endif /* CONFIG_FSL_BOOKE */

1
arch/powerpc/lib/rheap.c
View File

@ -556,6 +556,7 @@ unsigned long rh_alloc_fixed(rh_info_t * info, unsigned long start, int size, co
be = blk->start + blk->size;
if (s >= bs && e <= be)
break;
blk = NULL;
}
if (blk == NULL)

3
arch/powerpc/mm/hugetlbpage.c
View File

@ -507,6 +507,9 @@ unsigned long hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
{
struct hstate *hstate = hstate_file(file);
int mmu_psize = shift_to_mmu_psize(huge_page_shift(hstate));
if (!mmu_huge_psizes[mmu_psize])
return -EINVAL;
return slice_get_unmapped_area(addr, len, flags, mmu_psize, 1, 0);
}

16
arch/powerpc/mm/numa.c
View File

@ -901,10 +901,17 @@ static void mark_reserved_regions_for_nid(int nid)
if (end_pfn > node_ar.end_pfn)
reserve_size = (node_ar.end_pfn << PAGE_SHIFT)
- (start_pfn << PAGE_SHIFT);
dbg("reserve_bootmem %lx %lx nid=%d\n", physbase,
reserve_size, node_ar.nid);
reserve_bootmem_node(NODE_DATA(node_ar.nid), physbase,
reserve_size, BOOTMEM_DEFAULT);
/*
* Only worry about *this* node, others may not
* yet have valid NODE_DATA().
*/
if (node_ar.nid == nid) {
dbg("reserve_bootmem %lx %lx nid=%d\n",
physbase, reserve_size, node_ar.nid);
reserve_bootmem_node(NODE_DATA(node_ar.nid),
physbase, reserve_size,
BOOTMEM_DEFAULT);
}
/*
* if reserved region is contained in the active region
* then done.
@ -929,7 +936,6 @@ static void mark_reserved_regions_for_nid(int nid)
void __init do_init_bootmem(void)
{
int nid;
unsigned int i;
min_low_pfn = 0;
max_low_pfn = lmb_end_of_DRAM() >> PAGE_SHIFT;

3
arch/powerpc/platforms/cell/axon_msi.c
View File

@ -413,6 +413,9 @@ static int axon_msi_probe(struct of_device *device,
MSIC_CTRL_IRQ_ENABLE | MSIC_CTRL_ENABLE |
MSIC_CTRL_FIFO_SIZE);
msic->read_offset = dcr_read(msic->dcr_host, MSIC_WRITE_OFFSET_REG)
& MSIC_FIFO_SIZE_MASK;
device->dev.platform_data = msic;
ppc_md.setup_msi_irqs = axon_msi_setup_msi_irqs;

2
arch/sh/Kconfig
View File

@ -55,6 +55,8 @@ config GENERIC_HARDIRQS
config GENERIC_HARDIRQS_NO__DO_IRQ
def_bool y
depends on SUPERH32 && (!SH_DREAMCAST && !SH_SH4202_MICRODEV && \
!SH_7751_SYSTEMH && !HD64461)
config GENERIC_IRQ_PROBE
def_bool y

10
arch/sparc/include/asm/ptrace_32.h
View File

@ -62,6 +62,8 @@ struct sparc_stackf {
#ifdef __KERNEL__
#include <asm/system.h>
static inline bool pt_regs_is_syscall(struct pt_regs *regs)
{
return (regs->psr & PSR_SYSCALL);
@ -72,6 +74,14 @@ static inline bool pt_regs_clear_syscall(struct pt_regs *regs)
return (regs->psr &= ~PSR_SYSCALL);
}
#define arch_ptrace_stop_needed(exit_code, info) \
({ flush_user_windows(); \
current_thread_info()->w_saved != 0; \
})
#define arch_ptrace_stop(exit_code, info) \
synchronize_user_stack()
#define user_mode(regs) (!((regs)->psr & PSR_PS))
#define instruction_pointer(regs) ((regs)->pc)
#define user_stack_pointer(regs) ((regs)->u_regs[UREG_FP])

9
arch/sparc/include/asm/ptrace_64.h
View File

@ -114,6 +114,7 @@ struct sparc_trapf {
#ifdef __KERNEL__
#include <linux/threads.h>
#include <asm/system.h>
static inline int pt_regs_trap_type(struct pt_regs *regs)
{
@ -130,6 +131,14 @@ static inline bool pt_regs_clear_syscall(struct pt_regs *regs)
return (regs->tstate &= ~TSTATE_SYSCALL);
}
#define arch_ptrace_stop_needed(exit_code, info) \
({ flush_user_windows(); \
get_thread_wsaved() != 0; \
})
#define arch_ptrace_stop(exit_code, info) \
synchronize_user_stack()
struct global_reg_snapshot {
unsigned long tstate;
unsigned long tpc;

1
arch/x86/Kconfig.cpu
View File

@ -520,6 +520,7 @@ config X86_PTRACE_BTS
bool "Branch Trace Store"
default y
depends on X86_DEBUGCTLMSR
depends on BROKEN
help
This adds a ptrace interface to the hardware's branch trace store.

8
arch/x86/include/asm/vmi.h
View File

@ -223,9 +223,15 @@ struct pci_header {
} __attribute__((packed));
/* Function prototypes for bootstrapping */
#ifdef CONFIG_VMI
extern void vmi_init(void);
extern void vmi_activate(void);
extern void vmi_bringup(void);
extern void vmi_apply_boot_page_allocations(void);
#else
static inline void vmi_init(void) {}
static inline void vmi_activate(void) {}
static inline void vmi_bringup(void) {}
#endif
/* State needed to start an application processor in an SMP system. */
struct vmi_ap_state {

5
arch/x86/kernel/amd_iommu.c
View File

@ -235,8 +235,9 @@ static int iommu_completion_wait(struct amd_iommu *iommu)
status &= ~MMIO_STATUS_COM_WAIT_INT_MASK;
writel(status, iommu->mmio_base + MMIO_STATUS_OFFSET);
if (unlikely((i == EXIT_LOOP_COUNT) && printk_ratelimit()))
printk(KERN_WARNING "AMD IOMMU: Completion wait loop failed\n");
if (unlikely(i == EXIT_LOOP_COUNT))
panic("AMD IOMMU: Completion wait loop failed\n");
out:
spin_unlock_irqrestore(&iommu->lock, flags);

7
arch/x86/kernel/amd_iommu_init.c
View File

@ -427,6 +427,10 @@ static u8 * __init alloc_command_buffer(struct amd_iommu *iommu)
memcpy_toio(iommu->mmio_base + MMIO_CMD_BUF_OFFSET,
&entry, sizeof(entry));
/* set head and tail to zero manually */
writel(0x00, iommu->mmio_base + MMIO_CMD_HEAD_OFFSET);
writel(0x00, iommu->mmio_base + MMIO_CMD_TAIL_OFFSET);
iommu_feature_enable(iommu, CONTROL_CMDBUF_EN);
return cmd_buf;
@ -1074,7 +1078,8 @@ int __init amd_iommu_init(void)
goto free;
/* IOMMU rlookup table - find the IOMMU for a specific device */
amd_iommu_rlookup_table = (void *)__get_free_pages(GFP_KERNEL,
amd_iommu_rlookup_table = (void *)__get_free_pages(
GFP_KERNEL | __GFP_ZERO,
get_order(rlookup_table_size));
if (amd_iommu_rlookup_table == NULL)
goto free;

3
arch/x86/kernel/cpu/mcheck/mce_64.c
View File

@ -510,12 +510,9 @@ static void __cpuinit mce_cpu_features(struct cpuinfo_x86 *c)
*/
void __cpuinit mcheck_init(struct cpuinfo_x86 *c)
{
static cpumask_t mce_cpus = CPU_MASK_NONE;
mce_cpu_quirks(c);
if (mce_dont_init ||
cpu_test_and_set(smp_processor_id(), mce_cpus) ||
!mce_available(c))
return;

19
arch/x86/kernel/microcode_core.c
View File

@ -272,13 +272,18 @@ static struct attribute_group mc_attr_group = {
.name = "microcode",
};
static void microcode_fini_cpu(int cpu)
static void __microcode_fini_cpu(int cpu)
{
struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
mutex_lock(&microcode_mutex);
microcode_ops->microcode_fini_cpu(cpu);
uci->valid = 0;
}
static void microcode_fini_cpu(int cpu)
{
mutex_lock(&microcode_mutex);
__microcode_fini_cpu(cpu);
mutex_unlock(&microcode_mutex);
}
@ -306,12 +311,16 @@ static int microcode_resume_cpu(int cpu)
* to this cpu (a bit of paranoia):
*/
if (microcode_ops->collect_cpu_info(cpu, &nsig)) {
microcode_fini_cpu(cpu);
__microcode_fini_cpu(cpu);
printk(KERN_ERR "failed to collect_cpu_info for resuming cpu #%d\n",
cpu);
return -1;
}
if (memcmp(&nsig, &uci->cpu_sig, sizeof(nsig))) {
microcode_fini_cpu(cpu);
if ((nsig.sig != uci->cpu_sig.sig) || (nsig.pf != uci->cpu_sig.pf)) {
__microcode_fini_cpu(cpu);
printk(KERN_ERR "cached ucode doesn't match the resuming cpu #%d\n",
cpu);
/* Should we look for a new ucode here? */
return 1;
}

6
arch/x86/kernel/microcode_intel.c
View File

@ -155,6 +155,7 @@ static DEFINE_SPINLOCK(microcode_update_lock);
static int collect_cpu_info(int cpu_num, struct cpu_signature *csig)
{
struct cpuinfo_x86 *c = &cpu_data(cpu_num);
unsigned long flags;
unsigned int val[2];
memset(csig, 0, sizeof(*csig));
@ -174,11 +175,16 @@ static int collect_cpu_info(int cpu_num, struct cpu_signature *csig)
csig->pf = 1 << ((val[1] >> 18) & 7);
}
/* serialize access to the physical write to MSR 0x79 */
spin_lock_irqsave(&microcode_update_lock, flags);
wrmsr(MSR_IA32_UCODE_REV, 0, 0);
/* see notes above for revision 1.07. Apparent chip bug */
sync_core();
/* get the current revision from MSR 0x8B */
rdmsr(MSR_IA32_UCODE_REV, val[0], csig->rev);
spin_unlock_irqrestore(&microcode_update_lock, flags);
pr_debug("microcode: collect_cpu_info : sig=0x%x, pf=0x%x, rev=0x%x\n",
csig->sig, csig->pf, csig->rev);

4
arch/x86/kernel/pci-gart_64.c
View File

@ -745,10 +745,8 @@ void __init gart_iommu_init(void)
unsigned long scratch;
long i;
if (cache_k8_northbridges() < 0 || num_k8_northbridges == 0) {
printk(KERN_INFO "PCI-GART: No AMD GART found.\n");
if (cache_k8_northbridges() < 0 || num_k8_northbridges == 0)
return;
}
#ifndef CONFIG_AGP_AMD64
no_agp = 1;

12
arch/x86/kernel/setup.c
View File

@ -794,6 +794,9 @@ void __init setup_arch(char **cmdline_p)
printk(KERN_INFO "Command line: %s\n", boot_command_line);
#endif
/* VMI may relocate the fixmap; do this before touching ioremap area */
vmi_init();
early_cpu_init();
early_ioremap_init();
@ -880,13 +883,8 @@ void __init setup_arch(char **cmdline_p)
check_efer();
#endif
#if defined(CONFIG_VMI) && defined(CONFIG_X86_32)
/*
* Must be before kernel pagetables are setup
* or fixmap area is touched.
*/
vmi_init();
#endif
/* Must be before kernel pagetables are setup */
vmi_activate();
/* after early param, so could get panic from serial */
reserve_early_setup_data();

2
arch/x86/kernel/smpboot.c
View File

@ -294,9 +294,7 @@ static void __cpuinit start_secondary(void *unused)
* fragile that we want to limit the things done here to the
* most necessary things.
*/
#ifdef CONFIG_VMI
vmi_bringup();
#endif
cpu_init();
preempt_disable();
smp_callin();

16
arch/x86/kernel/vmi_32.c
View File

@ -960,8 +960,6 @@ static inline int __init activate_vmi(void)
void __init vmi_init(void)
{
unsigned long flags;
if (!vmi_rom)
probe_vmi_rom();
else
@ -973,13 +971,21 @@ void __init vmi_init(void)
reserve_top_address(-vmi_rom->virtual_top);
local_irq_save(flags);
activate_vmi();
#ifdef CONFIG_X86_IO_APIC
/* This is virtual hardware; timer routing is wired correctly */
no_timer_check = 1;
#endif
}
void vmi_activate(void)
{
unsigned long flags;
if (!vmi_rom)
return;
local_irq_save(flags);
activate_vmi();
local_irq_restore(flags & X86_EFLAGS_IF);
}

11
crypto/async_tx/async_xor.c
View File

@ -53,10 +53,17 @@ do_async_xor(struct dma_chan *chan, struct page *dest, struct page **src_list,
int xor_src_cnt;
dma_addr_t dma_dest;
dma_dest = dma_map_page(dma->dev, dest, offset, len, DMA_FROM_DEVICE);
for (i = 0; i < src_cnt; i++)
/* map the dest bidrectional in case it is re-used as a source */
dma_dest = dma_map_page(dma->dev, dest, offset, len, DMA_BIDIRECTIONAL);
for (i = 0; i < src_cnt; i++) {
/* only map the dest once */
if (unlikely(src_list[i] == dest)) {
dma_src[i] = dma_dest;
continue;
}
dma_src[i] = dma_map_page(dma->dev, src_list[i], offset,
len, DMA_TO_DEVICE);
}
while (src_cnt) {
async_flags = flags;

8
drivers/acpi/bus.c
View File

@ -688,14 +688,6 @@ void __init acpi_early_init(void)
if (acpi_disabled)
return;
/*
* ACPI CA initializes acpi_dbg_level to non-zero, which means
* we get debug output merely by turning on CONFIG_ACPI_DEBUG.
* Turn it off so we don't get output unless the user specifies
* acpi.debug_level.
*/
acpi_dbg_level = 0;
printk(KERN_INFO PREFIX "Core revision %08x\n", ACPI_CA_VERSION);
/* enable workarounds, unless strict ACPI spec. compliance */

50
drivers/acpi/toshiba_acpi.c
View File

@ -824,32 +824,36 @@ static int __init toshiba_acpi_init(void)
toshiba_acpi_exit();
return -ENOMEM;
}
}
/* Register input device for kill switch */
toshiba_acpi.poll_dev = input_allocate_polled_device();
if (!toshiba_acpi.poll_dev) {
printk(MY_ERR "unable to allocate kill-switch input device\n");
toshiba_acpi_exit();
return -ENOMEM;
}
toshiba_acpi.poll_dev->private = &toshiba_acpi;
toshiba_acpi.poll_dev->poll = bt_poll_rfkill;
toshiba_acpi.poll_dev->poll_interval = 1000; /* msecs */
/* Register input device for kill switch */
toshiba_acpi.poll_dev = input_allocate_polled_device();
if (!toshiba_acpi.poll_dev) {
printk(MY_ERR
"unable to allocate kill-switch input device\n");
toshiba_acpi_exit();
return -ENOMEM;
}
toshiba_acpi.poll_dev->private = &toshiba_acpi;
toshiba_acpi.poll_dev->poll = bt_poll_rfkill;
toshiba_acpi.poll_dev->poll_interval = 1000; /* msecs */
toshiba_acpi.poll_dev->input->name = toshiba_acpi.rfk_name;
toshiba_acpi.poll_dev->input->id.bustype = BUS_HOST;
toshiba_acpi.poll_dev->input->id.vendor = 0x0930; /* Toshiba USB ID */
set_bit(EV_SW, toshiba_acpi.poll_dev->input->evbit);
set_bit(SW_RFKILL_ALL, toshiba_acpi.poll_dev->input->swbit);
input_report_switch(toshiba_acpi.poll_dev->input, SW_RFKILL_ALL, TRUE);
input_sync(toshiba_acpi.poll_dev->input);
toshiba_acpi.poll_dev->input->name = toshiba_acpi.rfk_name;
toshiba_acpi.poll_dev->input->id.bustype = BUS_HOST;
/* Toshiba USB ID */
toshiba_acpi.poll_dev->input->id.vendor = 0x0930;
set_bit(EV_SW, toshiba_acpi.poll_dev->input->evbit);
set_bit(SW_RFKILL_ALL, toshiba_acpi.poll_dev->input->swbit);
input_report_switch(toshiba_acpi.poll_dev->input,
SW_RFKILL_ALL, TRUE);
input_sync(toshiba_acpi.poll_dev->input);
ret = input_register_polled_device(toshiba_acpi.poll_dev);
if (ret) {
printk(MY_ERR "unable to register kill-switch input device\n");
toshiba_acpi_exit();
return ret;
ret = input_register_polled_device(toshiba_acpi.poll_dev);
if (ret) {
printk(MY_ERR
"unable to register kill-switch input device\n");
toshiba_acpi_exit();
return ret;
}
}
return 0;

2
drivers/acpi/utilities/utglobal.c
View File

@ -64,7 +64,7 @@ u32 acpi_dbg_level = ACPI_DEBUG_DEFAULT;
/* Debug switch - layer (component) mask */
u32 acpi_dbg_layer = ACPI_COMPONENT_DEFAULT | ACPI_ALL_DRIVERS;
u32 acpi_dbg_layer = 0;
u32 acpi_gbl_nesting_level = 0;
/* Debugger globals */

65
drivers/ata/libata-core.c
View File

@ -4050,17 +4050,70 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
{ "ST3160023AS", "3.42", ATA_HORKAGE_NONCQ },
/* Seagate NCQ + FLUSH CACHE firmware bug */
{ "ST31500341AS", "9JU138", ATA_HORKAGE_NONCQ |
{ "ST31500341AS", "SD15", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
{ "ST31000333AS", "9FZ136", ATA_HORKAGE_NONCQ |
{ "ST31500341AS", "SD16", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
{ "ST3640623AS", "9FZ164", ATA_HORKAGE_NONCQ |
{ "ST31500341AS", "SD17", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
{ "ST3640323AS", "9FZ134", ATA_HORKAGE_NONCQ |
{ "ST31500341AS", "SD18", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
{ "ST3320813AS", "9FZ182", ATA_HORKAGE_NONCQ |
{ "ST31500341AS", "SD19", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
{ "ST3320613AS", "9FZ162", ATA_HORKAGE_NONCQ |
{ "ST31000333AS", "SD15", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
{ "ST31000333AS", "SD16", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
{ "ST31000333AS", "SD17", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
{ "ST31000333AS", "SD18", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
{ "ST31000333AS", "SD19", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
{ "ST3640623AS", "SD15", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
{ "ST3640623AS", "SD16", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
{ "ST3640623AS", "SD17", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
{ "ST3640623AS", "SD18", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
{ "ST3640623AS", "SD19", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
{ "ST3640323AS", "SD15", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
{ "ST3640323AS", "SD16", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
{ "ST3640323AS", "SD17", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
{ "ST3640323AS", "SD18", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
{ "ST3640323AS", "SD19", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
{ "ST3320813AS", "SD15", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
{ "ST3320813AS", "SD16", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
{ "ST3320813AS", "SD17", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
{ "ST3320813AS", "SD18", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
{ "ST3320813AS", "SD19", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
{ "ST3320613AS", "SD15", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
{ "ST3320613AS", "SD16", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
{ "ST3320613AS", "SD17", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
{ "ST3320613AS", "SD18", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
{ "ST3320613AS", "SD19", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
/* Blacklist entries taken from Silicon Image 3124/3132

12
drivers/ata/pata_hpt366.c
View File

@ -183,7 +183,9 @@ static unsigned long hpt366_filter(struct ata_device *adev, unsigned long mask)
mask &= ~(0xF8 << ATA_SHIFT_UDMA);
if (hpt_dma_blacklisted(adev, "UDMA4", bad_ata66_4))
mask &= ~(0xF0 << ATA_SHIFT_UDMA);
}
} else if (adev->class == ATA_DEV_ATAPI)
mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA);
return ata_bmdma_mode_filter(adev, mask);
}
@ -211,11 +213,15 @@ static u32 hpt36x_find_mode(struct ata_port *ap, int speed)
static int hpt36x_cable_detect(struct ata_port *ap)
{
u8 ata66;
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
u8 ata66;
/*
* Each channel of pata_hpt366 occupies separate PCI function
* as the primary channel and bit1 indicates the cable type.
*/
pci_read_config_byte(pdev, 0x5A, &ata66);
if (ata66 & (1 << ap->port_no))
if (ata66 & 2)
return ATA_CBL_PATA40;
return ATA_CBL_PATA80;
}

5
drivers/block/cciss.c
View File

@ -1693,6 +1693,11 @@ static int rebuild_lun_table(ctlr_info_t *h, int first_time)
for (i = 0; i <= h->highest_lun; i++) {
int j;
drv_found = 0;
/* skip holes in the array from already deleted drives */
if (h->drv[i].raid_level == -1)
continue;
for (j = 0; j < num_luns; j++) {
memcpy(&lunid, &ld_buff->LUN[j][0], 4);
lunid = le32_to_cpu(lunid);

18
drivers/cdrom/cdrom.c
View File

@ -2081,10 +2081,6 @@ static int cdrom_read_cdda_bpc(struct cdrom_device_info *cdi, __u8 __user *ubuf,
if (!q)
return -ENXIO;
rq = blk_get_request(q, READ, GFP_KERNEL);
if (!rq)
return -ENOMEM;
cdi->last_sense = 0;
while (nframes) {
@ -2096,9 +2092,17 @@ static int cdrom_read_cdda_bpc(struct cdrom_device_info *cdi, __u8 __user *ubuf,
len = nr * CD_FRAMESIZE_RAW;
ret = blk_rq_map_user(q, rq, NULL, ubuf, len, GFP_KERNEL);
if (ret)
rq = blk_get_request(q, READ, GFP_KERNEL);
if (!rq) {
ret = -ENOMEM;
break;
}
ret = blk_rq_map_user(q, rq, NULL, ubuf, len, GFP_KERNEL);
if (ret) {
blk_put_request(rq);
break;
}
rq->cmd[0] = GPCMD_READ_CD;
rq->cmd[1] = 1 << 2;
@ -2124,6 +2128,7 @@ static int cdrom_read_cdda_bpc(struct cdrom_device_info *cdi, __u8 __user *ubuf,
if (blk_rq_unmap_user(bio))
ret = -EFAULT;
blk_put_request(rq);
if (ret)
break;
@ -2133,7 +2138,6 @@ static int cdrom_read_cdda_bpc(struct cdrom_device_info *cdi, __u8 __user *ubuf,
ubuf += len;
}
blk_put_request(rq);
return ret;
}

12
drivers/char/cp437.uni
View File

@ -27,7 +27,7 @@
0x0c U+2640
0x0d U+266a
0x0e U+266b
0x0f U+263c
0x0f U+263c U+00a4
0x10 U+25b6 U+25ba
0x11 U+25c0 U+25c4
0x12 U+2195
@ -55,7 +55,7 @@
0x24 U+0024
0x25 U+0025
0x26 U+0026
0x27 U+0027
0x27 U+0027 U+00b4
0x28 U+0028
0x29 U+0029
0x2a U+002a
@ -84,7 +84,7 @@
0x41 U+0041 U+00c0 U+00c1 U+00c2 U+00c3
0x42 U+0042
0x43 U+0043 U+00a9
0x44 U+0044
0x44 U+0044 U+00d0
0x45 U+0045 U+00c8 U+00ca U+00cb
0x46 U+0046
0x47 U+0047
@ -140,7 +140,7 @@
0x79 U+0079 U+00fd
0x7a U+007a
0x7b U+007b
0x7c U+007c U+00a5
0x7c U+007c U+00a6
0x7d U+007d
0x7e U+007e
#
@ -263,10 +263,10 @@
0xe8 U+03a6 U+00d8
0xe9 U+0398
0xea U+03a9 U+2126
0xeb U+03b4
0xeb U+03b4 U+00f0
0xec U+221e
0xed U+03c6 U+00f8
0xee U+03b5
0xee U+03b5 U+2208
0xef U+2229
0xf0 U+2261
0xf1 U+00b1

2
drivers/char/vt.c
View File

@ -2274,7 +2274,7 @@ rescan_last_byte:
continue; /* nothing to display */
}
/* Glyph not found */
if ((!(vc->vc_utf && !vc->vc_disp_ctrl) || c < 128) && !(c & ~charmask)) {
if ((!(vc->vc_utf && !vc->vc_disp_ctrl) && c < 128) && !(c & ~charmask)) {
/* In legacy mode use the glyph we get by a 1:1 mapping.
This would make absolutely no sense with Unicode in mind,
but do this for ASCII characters since a font may lack

3
drivers/char/xilinx_hwicap/buffer_icap.c
View File

@ -21,9 +21,6 @@
* INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE.
*
* Xilinx products are not intended for use in life support appliances,
* devices, or systems. Use in such applications is expressly prohibited.
*
* (c) Copyright 2003-2008 Xilinx Inc.
* All rights reserved.
*

3
drivers/char/xilinx_hwicap/buffer_icap.h
View File

@ -21,9 +21,6 @@
* INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE.
*
* Xilinx products are not intended for use in life support appliances,
* devices, or systems. Use in such applications is expressly prohibited.
*
* (c) Copyright 2003-2008 Xilinx Inc.
* All rights reserved.
*

3
drivers/char/xilinx_hwicap/fifo_icap.c
View File

@ -21,9 +21,6 @@
* INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE.
*
* Xilinx products are not intended for use in life support appliances,
* devices, or systems. Use in such applications is expressly prohibited.
*
* (c) Copyright 2007-2008 Xilinx Inc.
* All rights reserved.
*

3
drivers/char/xilinx_hwicap/fifo_icap.h
View File

@ -21,9 +21,6 @@
* INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE.
*
* Xilinx products are not intended for use in life support appliances,
* devices, or systems. Use in such applications is expressly prohibited.
*
* (c) Copyright 2007-2008 Xilinx Inc.
* All rights reserved.
*

3
drivers/char/xilinx_hwicap/xilinx_hwicap.c
View File

@ -21,9 +21,6 @@
* INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE.
*
* Xilinx products are not intended for use in life support appliances,
* devices, or systems. Use in such applications is expressly prohibited.
*
* (c) Copyright 2002 Xilinx Inc., Systems Engineering Group
* (c) Copyright 2004 Xilinx Inc., Systems Engineering Group
* (c) Copyright 2007-2008 Xilinx Inc.

3
drivers/char/xilinx_hwicap/xilinx_hwicap.h
View File

@ -21,9 +21,6 @@
* INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE.
*
* Xilinx products are not intended for use in life support appliances,
* devices, or systems. Use in such applications is expressly prohibited.
*
* (c) Copyright 2003-2007 Xilinx Inc.
* All rights reserved.
*

3
drivers/dma/dmaengine.c
View File

@ -388,7 +388,10 @@ int dma_async_device_register(struct dma_device *device)
init_completion(&device->done);
kref_init(&device->refcount);
mutex_lock(&dma_list_mutex);
device->dev_id = id++;
mutex_unlock(&dma_list_mutex);
/* represent channels in sysfs. Probably want devs too */
list_for_each_entry(chan, &device->channels, device_node) {

5
drivers/dma/ioat_dma.c
View File

@ -1341,10 +1341,12 @@ static void ioat_dma_start_null_desc(struct ioat_dma_chan *ioat_chan)
*/
#define IOAT_TEST_SIZE 2000
DECLARE_COMPLETION(test_completion);
static void ioat_dma_test_callback(void *dma_async_param)
{
printk(KERN_ERR "ioatdma: ioat_dma_test_callback(%p)\n",
dma_async_param);
complete(&test_completion);
}
/**
@ -1410,7 +1412,8 @@ static int ioat_dma_self_test(struct ioatdma_device *device)
goto free_resources;
}
device->common.device_issue_pending(dma_chan);
msleep(1);
wait_for_completion_timeout(&test_completion, msecs_to_jiffies(3000));
if (device->common.device_is_tx_complete(dma_chan, cookie, NULL, NULL)
!= DMA_SUCCESS) {

16
drivers/dma/iop-adma.c
View File

@ -85,18 +85,28 @@ iop_adma_run_tx_complete_actions(struct iop_adma_desc_slot *desc,
enum dma_ctrl_flags flags = desc->async_tx.flags;
u32 src_cnt;
dma_addr_t addr;
dma_addr_t dest;
src_cnt = unmap->unmap_src_cnt;
dest = iop_desc_get_dest_addr(unmap, iop_chan);
if (!(flags & DMA_COMPL_SKIP_DEST_UNMAP)) {
addr = iop_desc_get_dest_addr(unmap, iop_chan);
dma_unmap_page(dev, addr, len, DMA_FROM_DEVICE);
enum dma_data_direction dir;
if (src_cnt > 1) /* is xor? */
dir = DMA_BIDIRECTIONAL;
else
dir = DMA_FROM_DEVICE;
dma_unmap_page(dev, dest, len, dir);
}
if (!(flags & DMA_COMPL_SKIP_SRC_UNMAP)) {
src_cnt = unmap->unmap_src_cnt;
while (src_cnt--) {
addr = iop_desc_get_src_addr(unmap,
iop_chan,
src_cnt);
if (addr == dest)
continue;
dma_unmap_page(dev, addr, len,
DMA_TO_DEVICE);
}

15
drivers/dma/mv_xor.c
View File

@ -311,17 +311,26 @@ mv_xor_run_tx_complete_actions(struct mv_xor_desc_slot *desc,
enum dma_ctrl_flags flags = desc->async_tx.flags;
u32 src_cnt;
dma_addr_t addr;
dma_addr_t dest;
src_cnt = unmap->unmap_src_cnt;
dest = mv_desc_get_dest_addr(unmap);
if (!(flags & DMA_COMPL_SKIP_DEST_UNMAP)) {
addr = mv_desc_get_dest_addr(unmap);
dma_unmap_page(dev, addr, len, DMA_FROM_DEVICE);
enum dma_data_direction dir;
if (src_cnt > 1) /* is xor ? */
dir = DMA_BIDIRECTIONAL;
else
dir = DMA_FROM_DEVICE;
dma_unmap_page(dev, dest, len, dir);
}
if (!(flags & DMA_COMPL_SKIP_SRC_UNMAP)) {
src_cnt = unmap->unmap_src_cnt;
while (src_cnt--) {
addr = mv_desc_get_src_addr(unmap,
src_cnt);
if (addr == dest)
continue;
dma_unmap_page(dev, addr, len,
DMA_TO_DEVICE);
}

12
drivers/edac/edac_device.c
View File

@ -394,6 +394,12 @@ static void edac_device_workq_function(struct work_struct *work_req)
mutex_lock(&device_ctls_mutex);
/* If we are being removed, bail out immediately */
if (edac_dev->op_state == OP_OFFLINE) {
mutex_unlock(&device_ctls_mutex);
return;
}
/* Only poll controllers that are running polled and have a check */
if ((edac_dev->op_state == OP_RUNNING_POLL) &&
(edac_dev->edac_check != NULL)) {
@ -585,14 +591,14 @@ struct edac_device_ctl_info *edac_device_del_device(struct device *dev)
/* mark this instance as OFFLINE */
edac_dev->op_state = OP_OFFLINE;
/* clear workq processing on this instance */
edac_device_workq_teardown(edac_dev);
/* deregister from global list */
del_edac_device_from_global_list(edac_dev);
mutex_unlock(&device_ctls_mutex);
/* clear workq processing on this instance */
edac_device_workq_teardown(edac_dev);
/* Tear down the sysfs entries for this instance */
edac_device_remove_sysfs(edac_dev);

10
drivers/gpu/drm/i915/i915_dma.c
View File

@ -717,7 +717,7 @@ static int i915_getparam(struct drm_device *dev, void *data,
value = dev->pci_device;
break;
case I915_PARAM_HAS_GEM:
value = 1;
value = dev_priv->has_gem;
break;
default:
DRM_ERROR("Unknown parameter %d\n", param->param);
@ -830,6 +830,14 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
dev_priv->regs = ioremap(base, size);
#ifdef CONFIG_HIGHMEM64G
/* don't enable GEM on PAE - needs agp + set_memory_* interface fixes */
dev_priv->has_gem = 0;
#else
/* enable GEM by default */
dev_priv->has_gem = 1;
#endif
i915_gem_load(dev);
/* Init HWS */

2
drivers/gpu/drm/i915/i915_drv.h
View File

@ -106,6 +106,8 @@ struct intel_opregion {
typedef struct drm_i915_private {
struct drm_device *dev;
int has_gem;
void __iomem *regs;
drm_local_map_t *sarea;

9
drivers/gpu/drm/i915/i915_gem.c
View File

@ -2309,7 +2309,14 @@ i915_gem_busy_ioctl(struct drm_device *dev, void *data,
}
obj_priv = obj->driver_private;
args->busy = obj_priv->active;
/* Don't count being on the flushing list against the object being
* done. Otherwise, a buffer left on the flushing list but not getting
* flushed (because nobody's flushing that domain) won't ever return
* unbusy and get reused by libdrm's bo cache. The other expected
* consumer of this interface, OpenGL's occlusion queries, also specs
* that the objects get unbusy "eventually" without any interference.
*/
args->busy = obj_priv->active && obj_priv->last_rendering_seqno != 0;
drm_gem_object_unreference(obj);
mutex_unlock(&dev->struct_mutex);

4
drivers/gpu/drm/radeon/radeon_irq.c
View File

@ -44,7 +44,7 @@ void radeon_irq_set_state(struct drm_device *dev, u32 mask, int state)
else
dev_priv->irq_enable_reg &= ~mask;
if (!dev->irq_enabled)
if (dev->irq_enabled)
RADEON_WRITE(RADEON_GEN_INT_CNTL, dev_priv->irq_enable_reg);
}
@ -57,7 +57,7 @@ static void r500_vbl_irq_set_state(struct drm_device *dev, u32 mask, int state)
else
dev_priv->r500_disp_irq_reg &= ~mask;
if (!dev->irq_enabled)
if (dev->irq_enabled)
RADEON_WRITE(R500_DxMODE_INT_MASK, dev_priv->r500_disp_irq_reg);
}

1
drivers/i2c/busses/i2c-cpm.c
View File

@ -365,6 +365,7 @@ static int cpm_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
pmsg = &msgs[tptr];
if (pmsg->flags & I2C_M_RD)
ret = wait_event_interruptible_timeout(cpm->i2c_wait,
(in_be16(&tbdf[tptr].cbd_sc) & BD_SC_NAK) ||
!(in_be16(&rbdf[rptr].cbd_sc) & BD_SC_EMPTY),
1 * HZ);
else

4
drivers/i2c/busses/i2c-highlander.c
View File

@ -92,7 +92,7 @@ static void highlander_i2c_setup(struct highlander_i2c_dev *dev)
static void smbus_write_data(u8 *src, u16 *dst, int len)
{
for (; len > 1; len -= 2) {
*dst++ = be16_to_cpup((u16 *)src);
*dst++ = be16_to_cpup((__be16 *)src);
src += 2;
}
@ -103,7 +103,7 @@ static void smbus_write_data(u8 *src, u16 *dst, int len)
static void smbus_read_data(u16 *src, u8 *dst, int len)
{
for (; len > 1; len -= 2) {
*(u16 *)dst = cpu_to_be16p(src++);
*(__be16 *)dst = cpu_to_be16p(src++);
dst += 2;
}

2
drivers/i2c/busses/i2c-pmcmsp.c
View File

@ -486,7 +486,7 @@ static enum pmcmsptwi_xfer_result pmcmsptwi_xfer_cmd(
if (cmd->type == MSP_TWI_CMD_WRITE ||
cmd->type == MSP_TWI_CMD_WRITE_READ) {
__be64 tmp = cpu_to_be64p((u64 *)cmd->write_data);
u64 tmp = be64_to_cpup((__be64 *)cmd->write_data);
tmp >>= (MSP_MAX_BYTES_PER_RW - cmd->write_len) * 8;
dev_dbg(&pmcmsptwi_adapter.dev, "Writing 0x%016llx\n", tmp);
pmcmsptwi_writel(tmp & 0x00000000ffffffffLL,

18
drivers/i2c/busses/i2c-s3c2410.c
View File

@ -56,6 +56,7 @@ enum s3c24xx_i2c_state {
struct s3c24xx_i2c {
spinlock_t lock;
wait_queue_head_t wait;
unsigned int suspended:1;
struct i2c_msg *msg;
unsigned int msg_num;
@ -507,7 +508,7 @@ static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c, struct i2c_msg *msgs, int
unsigned long timeout;
int ret;
if (!(readl(i2c->regs + S3C2410_IICCON) & S3C2410_IICCON_IRQEN))
if (i2c->suspended)
return -EIO;
ret = s3c24xx_i2c_set_master(i2c);
@ -986,17 +987,26 @@ static int s3c24xx_i2c_remove(struct platform_device *pdev)
}
#ifdef CONFIG_PM
static int s3c24xx_i2c_suspend_late(struct platform_device *dev,
pm_message_t msg)
{
struct s3c24xx_i2c *i2c = platform_get_drvdata(dev);
i2c->suspended = 1;
return 0;
}
static int s3c24xx_i2c_resume(struct platform_device *dev)
{
struct s3c24xx_i2c *i2c = platform_get_drvdata(dev);
if (i2c != NULL)
s3c24xx_i2c_init(i2c);
i2c->suspended = 0;
s3c24xx_i2c_init(i2c);
return 0;
}
#else
#define s3c24xx_i2c_suspend_late NULL
#define s3c24xx_i2c_resume NULL
#endif
@ -1005,6 +1015,7 @@ static int s3c24xx_i2c_resume(struct platform_device *dev)
static struct platform_driver s3c2410_i2c_driver = {
.probe = s3c24xx_i2c_probe,
.remove = s3c24xx_i2c_remove,
.suspend_late = s3c24xx_i2c_suspend_late,
.resume = s3c24xx_i2c_resume,
.driver = {
.owner = THIS_MODULE,
@ -1015,6 +1026,7 @@ static struct platform_driver s3c2410_i2c_driver = {
static struct platform_driver s3c2440_i2c_driver = {
.probe = s3c24xx_i2c_probe,
.remove = s3c24xx_i2c_remove,
.suspend_late = s3c24xx_i2c_suspend_late,
.resume = s3c24xx_i2c_resume,
.driver = {
.owner = THIS_MODULE,

3
drivers/ide/cs5530.c
View File

@ -81,11 +81,12 @@ static u8 cs5530_udma_filter(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
ide_drive_t *mate = ide_get_pair_dev(drive);
u16 *mateid = mate->id;
u16 *mateid;
u8 mask = hwif->ultra_mask;
if (mate == NULL)
goto out;
mateid = mate->id;
if (ata_id_has_dma(mateid) && __ide_dma_bad_drive(mate) == 0) {
if ((mateid[ATA_ID_FIELD_VALID] & 4) &&

3
drivers/ide/sc1200.c
View File

@ -104,11 +104,12 @@ static u8 sc1200_udma_filter(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
ide_drive_t *mate = ide_get_pair_dev(drive);
u16 *mateid = mate->id;
u16 *mateid;
u8 mask = hwif->ultra_mask;
if (mate == NULL)
goto out;
mateid = mate->id;
if (ata_id_has_dma(mateid) && __ide_dma_bad_drive(mate) == 0) {
if ((mateid[ATA_ID_FIELD_VALID] & 4) &&

6
drivers/ieee1394/nodemgr.c
View File

@ -115,8 +115,14 @@ static int nodemgr_bus_read(struct csr1212_csr *csr, u64 addr, u16 length,
return error;
}
#define OUI_FREECOM_TECHNOLOGIES_GMBH 0x0001db
static int nodemgr_get_max_rom(quadlet_t *bus_info_data, void *__ci)
{
/* Freecom FireWire Hard Drive firmware bug */
if (be32_to_cpu(bus_info_data[3]) >> 8 == OUI_FREECOM_TECHNOLOGIES_GMBH)
return 0;
return (be32_to_cpu(bus_info_data[2]) >> 8) & 0x3;
}

22
drivers/md/bitmap.c
View File

@ -208,15 +208,18 @@ static void bitmap_checkfree(struct bitmap *bitmap, unsigned long page)
*/
/* IO operations when bitmap is stored near all superblocks */
static struct page *read_sb_page(mddev_t *mddev, long offset, unsigned long index)
static struct page *read_sb_page(mddev_t *mddev, long offset,
struct page *page,
unsigned long index, int size)
{
/* choose a good rdev and read the page from there */
mdk_rdev_t *rdev;
struct list_head *tmp;
struct page *page = alloc_page(GFP_KERNEL);
sector_t target;
if (!page)
page = alloc_page(GFP_KERNEL);
if (!page)
return ERR_PTR(-ENOMEM);
@ -227,7 +230,9 @@ static struct page *read_sb_page(mddev_t *mddev, long offset, unsigned long inde
target = rdev->sb_start + offset + index * (PAGE_SIZE/512);
if (sync_page_io(rdev->bdev, target, PAGE_SIZE, page, READ)) {
if (sync_page_io(rdev->bdev, target,
roundup(size, bdev_hardsect_size(rdev->bdev)),
page, READ)) {
page->index = index;
attach_page_buffers(page, NULL); /* so that free_buffer will
* quietly no-op */
@ -544,7 +549,9 @@ static int bitmap_read_sb(struct bitmap *bitmap)
bitmap->sb_page = read_page(bitmap->file, 0, bitmap, bytes);
} else {
bitmap->sb_page = read_sb_page(bitmap->mddev, bitmap->offset, 0);
bitmap->sb_page = read_sb_page(bitmap->mddev, bitmap->offset,
NULL,
0, sizeof(bitmap_super_t));
}
if (IS_ERR(bitmap->sb_page)) {
err = PTR_ERR(bitmap->sb_page);
@ -957,11 +964,16 @@ static int bitmap_init_from_disk(struct bitmap *bitmap, sector_t start)
*/
page = bitmap->sb_page;
offset = sizeof(bitmap_super_t);
read_sb_page(bitmap->mddev, bitmap->offset,
page,
index, count);
} else if (file) {
page = read_page(file, index, bitmap, count);
offset = 0;
} else {
page = read_sb_page(bitmap->mddev, bitmap->offset, index);
page = read_sb_page(bitmap->mddev, bitmap->offset,
NULL,
index, count);
offset = 0;
}
if (IS_ERR(page)) { /* read error */

2
drivers/media/dvb/b2c2/Kconfig
View File

@ -9,11 +9,11 @@ config DVB_B2C2_FLEXCOP
select DVB_STV0297 if !DVB_FE_CUSTOMISE
select DVB_BCM3510 if !DVB_FE_CUSTOMISE
select DVB_LGDT330X if !DVB_FE_CUSTOMISE
select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE
select DVB_S5H1420 if !DVB_FE_CUSTOMISE
select DVB_TUNER_ITD1000 if !DVB_FE_CUSTOMISE
select DVB_ISL6421 if !DVB_FE_CUSTOMISE
select DVB_CX24123 if !DVB_FE_CUSTOMISE
select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMIZE
help
Support for the digital TV receiver chip made by B2C2 Inc. included in
Technisats PCI cards and USB boxes.

2
drivers/media/dvb/b2c2/flexcop-fe-tuner.c
View File

@ -628,12 +628,14 @@ int flexcop_frontend_init(struct flexcop_device *fc)
}
/* try the cable dvb (stv0297) */
fc->fc_i2c_adap[0].no_base_addr = 1;
fc->fe = dvb_attach(stv0297_attach, &alps_tdee4_stv0297_config, i2c);
if (fc->fe != NULL) {
fc->dev_type = FC_CABLE;
fc->fe->ops.tuner_ops.set_params = alps_tdee4_stv0297_tuner_set_params;
goto fe_found;
}
fc->fc_i2c_adap[0].no_base_addr = 0;
/* try the sky v2.3 (vp310/Samsung tbdu18132(tsa5059)) */
fc->fe = dvb_attach(mt312_attach,

6
drivers/media/dvb/b2c2/flexcop-i2c.c
View File

@ -47,8 +47,12 @@ static int flexcop_i2c_read4(struct flexcop_i2c_adapter *i2c,
int len = r100.tw_sm_c_100.total_bytes, /* remember total_bytes is buflen-1 */
ret;
r100.tw_sm_c_100.no_base_addr_ack_error = i2c->no_base_addr;
ret = flexcop_i2c_operation(i2c->fc, &r100);
if (ret != 0) {
deb_i2c("Retrying operation\n");
r100.tw_sm_c_100.no_base_addr_ack_error = i2c->no_base_addr;
ret = flexcop_i2c_operation(i2c->fc, &r100);
}
if (ret != 0) {
deb_i2c("read failed. %d\n", ret);
return ret;

2
drivers/media/dvb/bt8xx/Kconfig
View File

@ -8,7 +8,7 @@ config DVB_BT8XX
select DVB_OR51211 if !DVB_FE_CUSTOMISE
select DVB_LGDT330X if !DVB_FE_CUSTOMISE
select DVB_ZL10353 if !DVB_FE_CUSTOMISE
select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE
select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMIZE
help
Support for PCI cards based on the Bt8xx PCI bridge. Examples are
the Nebula cards, the Pinnacle PCTV cards, the Twinhan DST cards,

46
drivers/media/dvb/dvb-usb/Kconfig
View File

@ -24,8 +24,8 @@ config DVB_USB_A800
tristate "AVerMedia AverTV DVB-T USB 2.0 (A800)"
depends on DVB_USB
select DVB_DIB3000MC
select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE
select DVB_PLL if !DVB_FE_CUSTOMISE
select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE
help
Say Y here to support the AVerMedia AverTV DVB-T USB 2.0 (A800) receiver.
@ -34,7 +34,7 @@ config DVB_USB_DIBUSB_MB
depends on DVB_USB
select DVB_PLL if !DVB_FE_CUSTOMISE
select DVB_DIB3000MB
select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE
select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE
help
Support for USB 1.1 and 2.0 DVB-T receivers based on reference designs made by
DiBcom (<http://www.dibcom.fr>) equipped with a DiB3000M-B demodulator.
@ -55,7 +55,7 @@ config DVB_USB_DIBUSB_MC
tristate "DiBcom USB DVB-T devices (based on the DiB3000M-C/P) (see help for device list)"
depends on DVB_USB
select DVB_DIB3000MC
select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE
select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE
help
Support for USB2.0 DVB-T receivers based on reference designs made by
DiBcom (<http://www.dibcom.fr>) equipped with a DiB3000M-C/P demodulator.
@ -73,11 +73,11 @@ config DVB_USB_DIB0700
select DVB_DIB7000M
select DVB_DIB3000MC
select DVB_S5H1411 if !DVB_FE_CUSTOMISE
select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE
select MEDIA_TUNER_MT2266 if !DVB_FE_CUSTOMISE
select MEDIA_TUNER_XC2028 if !DVB_FE_CUSTOMISE
select MEDIA_TUNER_XC5000 if !DVB_FE_CUSTOMIZE
select DVB_TUNER_DIB0070
select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE
select MEDIA_TUNER_MT2266 if !MEDIA_TUNER_CUSTOMIZE
select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMIZE
select MEDIA_TUNER_XC5000 if !MEDIA_TUNER_CUSTOMIZE
help
Support for USB2.0/1.1 DVB receivers based on the DiB0700 USB bridge. The
USB bridge is also present in devices having the DiB7700 DVB-T-USB
@ -95,7 +95,7 @@ config DVB_USB_UMT_010
depends on DVB_USB
select DVB_PLL if !DVB_FE_CUSTOMISE
select DVB_DIB3000MC
select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE
select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE
help
Say Y here to support the HanfTek UMT-010 USB2.0 stick-sized DVB-T receiver.
@ -107,11 +107,11 @@ config DVB_USB_CXUSB
select DVB_LGDT330X if !DVB_FE_CUSTOMISE
select DVB_MT352 if !DVB_FE_CUSTOMISE
select DVB_ZL10353 if !DVB_FE_CUSTOMISE
select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE
select MEDIA_TUNER_XC2028 if !DVB_FE_CUSTOMISE
select MEDIA_TUNER_MXL5005S if !DVB_FE_CUSTOMISE
select DVB_DIB7000P if !DVB_FE_CUSTOMISE
select DVB_TUNER_DIB0070 if !DVB_FE_CUSTOMISE
select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMIZE
select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMIZE
select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMIZE
help
Say Y here to support the Conexant USB2.0 hybrid reference design.
Currently, only DVB and ATSC modes are supported, analog mode
@ -124,9 +124,9 @@ config DVB_USB_M920X
tristate "Uli m920x DVB-T USB2.0 support"
depends on DVB_USB
select DVB_MT352 if !DVB_FE_CUSTOMISE
select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE
select MEDIA_TUNER_TDA827X if !DVB_FE_CUSTOMISE
select DVB_TDA1004X if !DVB_FE_CUSTOMISE
select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMIZE
select MEDIA_TUNER_TDA827X if !MEDIA_TUNER_CUSTOMIZE
help
Say Y here to support the MSI Mega Sky 580 USB2.0 DVB-T receiver.
Currently, only devices with a product id of
@ -137,7 +137,7 @@ config DVB_USB_GL861
tristate "Genesys Logic GL861 USB2.0 support"
depends on DVB_USB
select DVB_ZL10353 if !DVB_FE_CUSTOMISE
select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE
select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMIZE
help
Say Y here to support the MSI Megasky 580 (55801) DVB-T USB2.0
receiver with USB ID 0db0:5581.
@ -146,7 +146,7 @@ config DVB_USB_AU6610
tristate "Alcor Micro AU6610 USB2.0 support"
depends on DVB_USB
select DVB_ZL10353 if !DVB_FE_CUSTOMISE
select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE
select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMIZE
help
Say Y here to support the Sigmatek DVB-110 DVB-T USB2.0 receiver.
@ -198,8 +198,8 @@ config DVB_USB_NOVA_T_USB2
tristate "Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 support"
depends on DVB_USB
select DVB_DIB3000MC
select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE
select DVB_PLL if !DVB_FE_CUSTOMISE
select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE
help
Say Y here to support the Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 receiver.
@ -235,8 +235,8 @@ config DVB_USB_OPERA1
config DVB_USB_AF9005
tristate "Afatech AF9005 DVB-T USB1.1 support"
depends on DVB_USB && EXPERIMENTAL
select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE
select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE
select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE
select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMIZE
help
Say Y here to support the Afatech AF9005 based DVB-T USB1.1 receiver
and the TerraTec Cinergy T USB XE (Rev.1)
@ -284,7 +284,7 @@ config DVB_USB_DTV5100
tristate "AME DTV-5100 USB2.0 DVB-T support"
depends on DVB_USB
select DVB_ZL10353 if !DVB_FE_CUSTOMISE
select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE
select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMIZE
help
Say Y here to support the AME DTV-5100 USB2.0 DVB-T receiver.
@ -293,9 +293,9 @@ config DVB_USB_AF9015
depends on DVB_USB && EXPERIMENTAL
select DVB_AF9013
select DVB_PLL if !DVB_FE_CUSTOMISE
select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE
select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE
select MEDIA_TUNER_TDA18271 if !DVB_FE_CUSTOMISE
select MEDIA_TUNER_MXL5005S if !DVB_FE_CUSTOMISE
select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE
select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMIZE
select MEDIA_TUNER_TDA18271 if !MEDIA_TUNER_CUSTOMIZE
select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMIZE
help
Say Y here to support the Afatech AF9015 based DVB-T USB2.0 receiver

6
drivers/media/dvb/dvb-usb/dib0700_devices.c
View File

@ -446,13 +446,13 @@ static int stk7700ph_tuner_attach(struct dvb_usb_adapter *adap)
== NULL ? -ENODEV : 0;
}
#define DEFAULT_RC_INTERVAL 150
#define DEFAULT_RC_INTERVAL 50
static u8 rc_request[] = { REQUEST_POLL_RC, 0 };
/* Number of keypresses to ignore before start repeating */
#define RC_REPEAT_DELAY 2
#define RC_REPEAT_DELAY_V1_20 5
#define RC_REPEAT_DELAY 6
#define RC_REPEAT_DELAY_V1_20 10

2
drivers/media/dvb/ttpci/Kconfig
View File

@ -106,7 +106,7 @@ config DVB_BUDGET_CI
select DVB_TDA1004X if !DVB_FE_CUSTOMISE
select DVB_LNBP21 if !DVB_FE_CUSTOMISE
select DVB_TDA10023 if !DVB_FE_CUSTOMISE
select MEDIA_TUNER_TDA827X if !DVB_FE_CUSTOMISE
select MEDIA_TUNER_TDA827X if !MEDIA_TUNER_CUSTOMIZE
select VIDEO_IR
help
Support for simple SAA7146 based DVB cards

2
drivers/media/video/compat_ioctl32.c
View File

@ -831,7 +831,7 @@ long v4l_compat_ioctl32(struct file *file, unsigned int cmd, unsigned long arg)
{
int ret = -ENOIOCTLCMD;
if (!file->f_op->ioctl)
if (!file->f_op->ioctl && !file->f_op->unlocked_ioctl)
return ret;
switch (cmd) {

2
drivers/media/video/cx18/Kconfig
View File

@ -9,7 +9,7 @@ config VIDEO_CX18
select VIDEO_CX2341X
select VIDEO_CS5345
select DVB_S5H1409 if !DVB_FE_CUSTOMISE
select MEDIA_TUNER_MXL5005S if !DVB_FE_CUSTOMISE
select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMIZE
---help---
This is a video4linux driver for Conexant cx23418 based
PCI combo video recorder devices.

4
drivers/media/video/cx23885/Kconfig
View File

@ -11,16 +11,16 @@ config VIDEO_CX23885
select VIDEO_CX25840
select VIDEO_CX2341X
select DVB_DIB7000P if !DVB_FE_CUSTOMISE
select MEDIA_TUNER_MT2131 if !DVB_FE_CUSTOMISE
select DVB_S5H1409 if !DVB_FE_CUSTOMISE
select DVB_S5H1411 if !DVB_FE_CUSTOMISE
select DVB_LGDT330X if !DVB_FE_CUSTOMISE
select DVB_ZL10353 if !DVB_FE_CUSTOMISE
select DVB_TDA10048 if !DVB_FE_CUSTOMIZE
select MEDIA_TUNER_MT2131 if !MEDIA_TUNER_CUSTOMIZE
select MEDIA_TUNER_XC2028 if !DVB_FE_CUSTOMIZE
select MEDIA_TUNER_TDA8290 if !DVB_FE_CUSTOMIZE
select MEDIA_TUNER_TDA18271 if !DVB_FE_CUSTOMIZE
select MEDIA_TUNER_XC5000 if !DVB_FE_CUSTOMIZE
select DVB_TDA10048 if !DVB_FE_CUSTOMIZE
---help---
This is a video4linux driver for Conexant 23885 based
TV cards.

2
drivers/media/video/cx88/Kconfig
View File

@ -56,12 +56,12 @@ config VIDEO_CX88_DVB
select DVB_NXT200X if !DVB_FE_CUSTOMISE
select DVB_CX24123 if !DVB_FE_CUSTOMISE
select DVB_ISL6421 if !DVB_FE_CUSTOMISE
select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE
select DVB_S5H1411 if !DVB_FE_CUSTOMISE
select DVB_CX24116 if !DVB_FE_CUSTOMISE
select DVB_STV0299 if !DVB_FE_CUSTOMISE
select DVB_STV0288 if !DVB_FE_CUSTOMISE
select DVB_STB6000 if !DVB_FE_CUSTOMISE
select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMIZE
---help---
This adds support for DVB/ATSC cards based on the
Conexant 2388x chip.

3
drivers/media/video/em28xx/em28xx-video.c
View File

@ -549,10 +549,11 @@ static int em28xx_config(struct em28xx *dev)
static void em28xx_config_i2c(struct em28xx *dev)
{
struct v4l2_routing route;
int zero = 0;
route.input = INPUT(dev->ctl_input)->vmux;
route.output = 0;
em28xx_i2c_call_clients(dev, VIDIOC_INT_RESET, NULL);
em28xx_i2c_call_clients(dev, VIDIOC_INT_RESET, &zero);
em28xx_i2c_call_clients(dev, VIDIOC_INT_S_VIDEO_ROUTING, &route);
em28xx_i2c_call_clients(dev, VIDIOC_STREAMON, NULL);
}

4
drivers/media/video/gspca/gspca.c
View File

@ -1264,10 +1264,10 @@ static int vidioc_s_jpegcomp(struct file *file, void *priv,
struct gspca_dev *gspca_dev = priv;
int ret;
if (mutex_lock_interruptible(&gspca_dev->usb_lock))
return -ERESTARTSYS;
if (!gspca_dev->sd_desc->set_jcomp)
return -EINVAL;
if (mutex_lock_interruptible(&gspca_dev->usb_lock))
return -ERESTARTSYS;
ret = gspca_dev->sd_desc->set_jcomp(gspca_dev, jpegcomp);
mutex_unlock(&gspca_dev->usb_lock);
return ret;

2
drivers/media/video/pvrusb2/Kconfig
View File

@ -42,7 +42,7 @@ config VIDEO_PVRUSB2_DVB
select DVB_S5H1411 if !DVB_FE_CUSTOMISE
select DVB_TDA10048 if !DVB_FE_CUSTOMIZE
select MEDIA_TUNER_TDA18271 if !DVB_FE_CUSTOMIZE
select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE
select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMIZE
select MEDIA_TUNER_TDA8290 if !DVB_FE_CUSTOMIZE
---help---

4
drivers/media/video/saa7134/Kconfig
View File

@ -34,9 +34,9 @@ config VIDEO_SAA7134_DVB
select DVB_NXT200X if !DVB_FE_CUSTOMISE
select DVB_TDA10086 if !DVB_FE_CUSTOMISE
select DVB_TDA826X if !DVB_FE_CUSTOMISE
select MEDIA_TUNER_TDA827X if !DVB_FE_CUSTOMISE
select DVB_ISL6421 if !DVB_FE_CUSTOMISE
select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE
select MEDIA_TUNER_TDA827X if !MEDIA_TUNER_CUSTOMIZE
select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMIZE
---help---
This adds support for DVB cards based on the
Philips saa7134 chip.

3
drivers/message/fusion/mptscsih.c
View File

@ -2008,6 +2008,9 @@ mptscsih_host_reset(struct scsi_cmnd *SCpnt)
return FAILED;
}
/* make sure we have no outstanding commands at this stage */
mptscsih_flush_running_cmds(hd);
ioc = hd->ioc;
printk(MYIOC_s_INFO_FMT "attempting host reset! (sc=%p)\n",
ioc->name, SCpnt);

6
drivers/net/bnx2.c
View File

@ -543,9 +543,9 @@ bnx2_free_rx_mem(struct bnx2 *bp)
for (j = 0; j < bp->rx_max_pg_ring; j++) {
if (rxr->rx_pg_desc_ring[j])
pci_free_consistent(bp->pdev, RXBD_RING_SIZE,
rxr->rx_pg_desc_ring[i],
rxr->rx_pg_desc_mapping[i]);
rxr->rx_pg_desc_ring[i] = NULL;
rxr->rx_pg_desc_ring[j],
rxr->rx_pg_desc_mapping[j]);
rxr->rx_pg_desc_ring[j] = NULL;
}
if (rxr->rx_pg_ring)
vfree(rxr->rx_pg_ring);

9
drivers/net/e1000e/ich8lan.c
View File

@ -1893,12 +1893,17 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
ctrl |= E1000_CTRL_PHY_RST;
}
ret_val = e1000_acquire_swflag_ich8lan(hw);
/* Whether or not the swflag was acquired, we need to reset the part */
hw_dbg(hw, "Issuing a global reset to ich8lan");
ew32(CTRL, (ctrl | E1000_CTRL_RST));
msleep(20);
/* release the swflag because it is not reset by hardware reset */
e1000_release_swflag_ich8lan(hw);
if (!ret_val) {
/* release the swflag because it is not reset by
* hardware reset
*/
e1000_release_swflag_ich8lan(hw);
}
ret_val = e1000e_get_auto_rd_done(hw);
if (ret_val) {

2
drivers/net/enc28j60.c
View File

@ -959,7 +959,7 @@ static void enc28j60_hw_rx(struct net_device *ndev)
ndev->stats.rx_packets++;
ndev->stats.rx_bytes += len;
ndev->last_rx = jiffies;
netif_rx(skb);
netif_rx_ni(skb);
}
}
/*

2
drivers/net/jme.h
View File

@ -22,7 +22,7 @@
*/
#ifndef __JME_H_INCLUDED__
#define __JME_H_INCLUDEE__
#define __JME_H_INCLUDED__
#define DRV_NAME "jme"
#define DRV_VERSION "1.0.3"

5
drivers/net/phy/mdio_bus.c
View File

@ -105,8 +105,6 @@ int mdiobus_register(struct mii_bus *bus)
return -EINVAL;
}
bus->state = MDIOBUS_REGISTERED;
mutex_init(&bus->mdio_lock);
if (bus->reset)
@ -123,6 +121,9 @@ int mdiobus_register(struct mii_bus *bus)
}
}
if (!err)
bus->state = MDIOBUS_REGISTERED;
pr_info("%s: probed\n", bus->name);
return err;

Some files were not shown because too many files have changed in this diff Show More