forked from Minki/linux
pwm-pca9685: Fix several driver bugs
Problems: - When duty_ns == period_ns, the full OFF bit was not cleared and the PWM output of the PCA9685 stayed off. - When duty_ns == period_ns and the catch-all channel was used, the ALL_LED_OFF_L register was not cleared. - The full ON bit was not cleared when setting the OFF time, therefore the exact OFF time was ignored when setting a duty_ns < period_ns Solution: Clear both OFF registers when setting full ON and clear the full ON bit when changing the OFF registers. Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Clemens Gruber <clemens.gruber@pqgruber.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
This commit is contained in:
parent
fe0aea7978
commit
4a627b52e4
@ -85,6 +85,22 @@ static int pca9685_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
|
||||
}
|
||||
|
||||
if (duty_ns == period_ns) {
|
||||
/* Clear both OFF registers */
|
||||
if (pwm->hwpwm >= PCA9685_MAXCHAN)
|
||||
reg = PCA9685_ALL_LED_OFF_L;
|
||||
else
|
||||
reg = LED_N_OFF_L(pwm->hwpwm);
|
||||
|
||||
regmap_write(pca->regmap, reg, 0x0);
|
||||
|
||||
if (pwm->hwpwm >= PCA9685_MAXCHAN)
|
||||
reg = PCA9685_ALL_LED_OFF_H;
|
||||
else
|
||||
reg = LED_N_OFF_H(pwm->hwpwm);
|
||||
|
||||
regmap_write(pca->regmap, reg, 0x0);
|
||||
|
||||
/* Set the full ON bit */
|
||||
if (pwm->hwpwm >= PCA9685_MAXCHAN)
|
||||
reg = PCA9685_ALL_LED_ON_H;
|
||||
else
|
||||
@ -112,6 +128,14 @@ static int pca9685_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
|
||||
|
||||
regmap_write(pca->regmap, reg, ((int)duty >> 8) & 0xf);
|
||||
|
||||
/* Clear the full ON bit, otherwise the set OFF time has no effect */
|
||||
if (pwm->hwpwm >= PCA9685_MAXCHAN)
|
||||
reg = PCA9685_ALL_LED_ON_H;
|
||||
else
|
||||
reg = LED_N_ON_H(pwm->hwpwm);
|
||||
|
||||
regmap_write(pca->regmap, reg, 0);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
Loading…
Reference in New Issue
Block a user