i40e: Retry AQC GetPhyAbilities to overcome I2CRead hangs

- When the I2C is busy, the PHY reads are delayed.  The firmware will
  return EGAIN in these cases with an expectation that the SW will
  trigger the reads again
- This patch retries the operation for a maximum period of 500ms

Signed-off-by: Jayaprakash Shanmugam <jayaprakash.shanmugam@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
This commit is contained in:
Jayaprakash Shanmugam 2017-09-07 08:05:55 -04:00 committed by Jeff Kirsher
parent b861fb762a
commit 4988410f8d
3 changed files with 35 additions and 13 deletions

View File

@ -1567,30 +1567,46 @@ i40e_status i40e_aq_get_phy_capabilities(struct i40e_hw *hw,
struct i40e_aq_desc desc;
i40e_status status;
u16 abilities_size = sizeof(struct i40e_aq_get_phy_abilities_resp);
u16 max_delay = I40E_MAX_PHY_TIMEOUT, total_delay = 0;
if (!abilities)
return I40E_ERR_PARAM;
i40e_fill_default_direct_cmd_desc(&desc,
i40e_aqc_opc_get_phy_abilities);
do {
i40e_fill_default_direct_cmd_desc(&desc,
i40e_aqc_opc_get_phy_abilities);
desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_BUF);
if (abilities_size > I40E_AQ_LARGE_BUF)
desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_LB);
desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_BUF);
if (abilities_size > I40E_AQ_LARGE_BUF)
desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_LB);
if (qualified_modules)
desc.params.external.param0 |=
if (qualified_modules)
desc.params.external.param0 |=
cpu_to_le32(I40E_AQ_PHY_REPORT_QUALIFIED_MODULES);
if (report_init)
desc.params.external.param0 |=
if (report_init)
desc.params.external.param0 |=
cpu_to_le32(I40E_AQ_PHY_REPORT_INITIAL_VALUES);
status = i40e_asq_send_command(hw, &desc, abilities, abilities_size,
cmd_details);
status = i40e_asq_send_command(hw, &desc, abilities,
abilities_size, cmd_details);
if (hw->aq.asq_last_status == I40E_AQ_RC_EIO)
status = I40E_ERR_UNKNOWN_PHY;
if (status)
break;
if (hw->aq.asq_last_status == I40E_AQ_RC_EIO) {
status = I40E_ERR_UNKNOWN_PHY;
break;
} else if (hw->aq.asq_last_status == I40E_AQ_RC_EAGAIN) {
usleep_range(1000, 2000);
total_delay++;
status = I40E_ERR_TIMEOUT;
}
} while ((hw->aq.asq_last_status != I40E_AQ_RC_OK) &&
(total_delay < max_delay));
if (status)
return status;
if (report_init) {
if (hw->mac.type == I40E_MAC_XL710 &&

View File

@ -46,6 +46,9 @@
/* Max default timeout in ms, */
#define I40E_MAX_NVM_TIMEOUT 18000
/* Max timeout in ms for the phy to respond */
#define I40E_MAX_PHY_TIMEOUT 500
/* Switch from ms to the 1usec global time (this is the GTIME resolution) */
#define I40E_MS_TO_GTIME(time) ((time) * 1000)

View File

@ -46,6 +46,9 @@
/* Max default timeout in ms, */
#define I40E_MAX_NVM_TIMEOUT 18000
/* Max timeout in ms for the phy to respond */
#define I40E_MAX_PHY_TIMEOUT 500
/* Switch from ms to the 1usec global time (this is the GTIME resolution) */
#define I40E_MS_TO_GTIME(time) ((time) * 1000)